# Copyright (C) 2016 and later: Unicode, Inc. and others.
# License & terms of use: http://www.unicode.org/copyright.html
# Copyright (C) 2010-2014, International Business Machines Corporation and others.
# All Rights Reserved.
#
# Commands for regenerating ICU4C locale data (.txt files) from CLDR.
#
# The process requires local copies of
# - CLDR (the source of most of the data, and some Java tools)
# - ICU4J (used only for checking the converted data)
# - ICU4C (the destination for the new data, and the source for some of it)
# (Either check out ICU4C from Subversion, or download the additional
# icu4c-*-data.zip file so that the icu/source/data/ directory is fully
# populated.)
#
# For an official CLDR data integration into ICU, these should be clean, freshly
# checked-out. For released CLDR sources, an alternative to checking out sources
# for a given version is downloading the zipped sources for the common (core.zip)
# and tools (tools.zip) directory subtrees from the Data column in
# [http://cldr.unicode.org/index/downloads].
#
# The versions of each of these must match. Included with the release notes for
# ICU is the version number and/or a CLDR svn tag name for the revision of CLDR
# that was the source of the data for that release of ICU.
#
# Note: Some versions of the OpenJDK will not build the CLDR java utilities.
# If you see compilation errors complaining about type incompatibilities with
# functions on generic classes, try switching to the Sun JDK.
#
# Besides a standard JDK, the process also requires ant
# (http://ant.apache.org/),
# plus the xml-apis.jar from the Apache xalan package
# (http://xml.apache.org/xalan-j/downloads.html).
#
# Note: Enough things can (and will) fail in this process that it is best to
# run the commands separately from an interactive shell. They should all
# copy and paste without problems.
#
# It is often useful to save logs of the output of many of the steps in this
# process. The commands below put log files in /tmp; you may want to put them
# somewhere else.
#
#----
#
# There are several environment variables that need to be defined.
#
# a) Java- and ant-related variables
#
# JAVA_HOME: Path to JDK (a directory, containing e.g. bin/java, bin/javac,
# etc.); on many systems this can be set using
# `/usr/libexec/java_home`.
#
# ANT_OPTS: You may want to set:
#
# -Xmx1024m, to give Java more memory; otherwise it may run out
# of heap.
#
# b) CLDR-related variables
#
# CLDR_DIR: Path to root of CLDR sources, below which are the common and
# tools directories.
# CLDR_CLASSES: Defined relative to CLDR_DIR. It only needs to be set if you
# are not running ant jar for CLDR and have a non-default output
# folder for cldr-tools classes.
#
# c) ICU-related variables
# These variables only need to be set if you're directly reusing the
# commands below.
#
# ICU4C_DIR: Path to root of ICU4C sources, below which is the source dir.
#
# ICU4J_ROOT: Path to root of ICU4J sources, below which is the main dir.
#
#----
#
# If you are adding or removing locales, or specific kinds of locale data,
# there are some xml files in the ICU sources that need to be updated (these xml
# files are used in addition to the CLDR files as inputs to the CLDR data build
# process for ICU):
#
# icu/trunk/source/data/icu-config.xml - Update <locales> to add or remove
# CLDR locales for inclusion in ICU. Update <paths> to prefer
# alt forms for certain paths, or to exclude certain paths; note
# that <paths> items can only have draft or alt attributes.
#
# Note that if a language-only locale (e.g. "de") is included in
# <locales>, then all region sublocales for that language that
# are present in CLDR data (e.g. "de_AT", "de_BE", "de_CH", etc.)
# should also be included in <locales>, per PMC policy decision
# 2012-05-02 (see http://bugs.icu-project.org/trac/ticket/9298).
#
# icu/trunk/source/data/build.xml - If you are adding or removing break
# iterators, you need to update <fileset id="brkitr" ...> under
# <target name="clean" ...> to clean the correct set of files.
#
# icu/trunk/source/data/xml/ - If you are adding a new locale, break
# iterator, collation tailoring, or rule-based number formatter,
# you may need to add a corresponding xml file in (respectively)
# the main/, brkitr/, collation/, or rbnf/ subdirectory here.
#
#----
#
# For an official CLDR data integration into ICU, there are some additional
# considerations:
#
# a) Don't commit anything in ICU sources (and possibly any changes in CLDR
# sources, depending on their nature) until you have finished testing and
# resolving build issues and test failures for both ICU4C and ICU4J.
#
# b) There are version numbers that may need manual updating in CLDR (other
# version numbers get updated automatically, based on these):
#
# common/dtd/ldml.dtd - update cldrVersion
# common/dtd/ldmlBCP47.dtd - update cldrVersion
# common/dtd/ldmlSupplemental.dtd - update cldrVersion
# tools/java/org/unicode/cldr/util/CLDRFile.java - update GEN_VERSION
#
# c) After everything is committed, you will need to tag the CLDR, ICU4J, and
# ICU4C sources that ended up being used for the integration; see step 17
# below.
#
################################################################################
# 1a. Java and ant variables, adjust for your system
export JAVA_HOME=`/usr/libexec/java_home`
export ANT_OPTS="-Xmx1024m"
# 1b. CLDR variables, adjust for your setup; with cygwin it might be e.g.
# CLDR_DIR=`cygpath -wp /build/cldr`
export CLDR_DIR=$HOME/cldr/trunk
#export CLDR_CLASSES=$CLDR_DIR/tools/java/classes
# 1c. ICU variables
export ICU4C_DIR=$HOME/icu/icu/trunk
export ICU4J_ROOT=$HOME/icu/icu4j/trunk
# 2. Build the CLDR Java tools
cd $CLDR_DIR/tools/java
#cd $CLDR_DIR/cldr-tools
ant jar
# 3. Configure ICU4C, build and test without new data first, to verify that
# there are no pre-existing errors (configure shown here for MacOSX, adjust
# for your platform).
cd $ICU4C_DIR/source
./runConfigureICU MacOSX
make all 2>&1 | tee /tmp/icu4c-oldData-makeAll.txt
make check 2>&1 | tee /tmp/icu4c-oldData-makeCheck.txt
# 4. Build the new ICU4C data files; these include .txt files and .mk files.
# These new files will replace whatever was already present in the ICU4C sources.
# This process uses ant with ICU's data/build.xml and data/icu-config.xml to
# operate (via CLDR's ant/CLDRConverterTool.java and ant/CLDRBuild.java) the
# necessary CLDR tools including LDML2ICUConverter, ConvertTransforms, etc.
# This process will take several minutes.
# Keep a log so you can investigate anything that looks suspicious.
cd $ICU4C_DIR/source/data
ant clean
ant all 2>&1 | tee /tmp/cldrNN-buildLog.txt
# 5. Check which data files have modifications, which have been added or removed
# (if there are no changes, you may not need to proceed further). Make sure the
# list seems reasonable.
svn status
# 6. Fix any errors, investigate any warnings. Some warnings are expected,
# including warnings for missing versions in locale names which specify some
# collationvariants, e.g.
# [cldr-build] WARNING (ja_JP_TRADITIONAL): No version #??
# [cldr-build] WARNING (zh_TW_STROKE): No version #??
# and warnings for some empty collation bundles, e.g.
# [cldr-build] WARNING (en): warning: No collations found. Bundle will ...
# [cldr-build] WARNING (to): warning: No collations found. Bundle will ...
#
# Fixing may entail modifying CLDR source data or tools - for example,
# updating the validSubLocales for collation data (file a bug if appropriate).
# Repeat steps 4-5 until there are no build errors and no unexpected
# warnings.
# 7. Now rebuild ICU4C with the new data and run make check tests.
# Again, keep a log so you can investigate the errors.
cd $ICU4C_DIR/source
make check 2>&1 | tee /tmp/icu4c-newData-makeCheck.txt
# 8. Investigate each test case failure. The first run processing new CLDR data
# from the Survey Tool can result in thousands of failures (in many cases, one
# CLDR data fix can resolve hundreds of test failures). If the error is caused
# by bad CLDR data, then file a CLDR bug, fix the data, and regenerate from
# step 4. If the data is OK but the testcase needs to be updated because the
# data has legitimately changed, then update the testcase. You will check in
# the updated testcases along with the new ICU data at the end of this process.
# Note that if the new data has any differences in structure, you will have to
# update test/testdata/structLocale.txt or /tsutil/cldrtest/TestLocaleStructure
# may fail.
# Repeat steps 4-7 until there are no errors.
# 9. Now run the make check tests in exhaustive mode:
cd $ICU4C_DIR/source
export INTLTEST_OPTS="-e"
export CINTLTST_OPTS="-e"
make check 2>&1 | tee /tmp/icu4c-newData-makeCheckEx.txt
# 10. Again, investigate each failure, fixing CLDR data or ICU test cases as
# appropriate, and repeating steps 4-7 and 9 until there are no errors.
# 11. Now with ICU4J, build and test without new data first, to verify that
# there are no pre-existing errors (or at least to have the pre-existing errors
# as a base for comparison):
cd $ICU4J_ROOT
ant all 2>&1 | tee /tmp/icu4j-oldData-antAll.txt
ant check 2>&1 | tee /tmp/icu4j-oldData-antCheck.txt
# 12. Now build the new data for ICU4J
cd $ICU4C_DIR/source/data
make icu4j-data-install
# 13. Now rebuild ICU4J with the new data and run tests:
# Keep a log so you can investigate the errors.
cd $ICU4J_ROOT
ant check 2>&1 | tee /tmp/icu4j-newData-antCheck.txt
# 14. Investigate test case failures; fix test cases and repeat from step 12,
# or fix CLDR data and repeat from step 4, as appropriate, until; there are no
# more failures in ICU4C or ICU4J (except failures that were present before you
# began testing the new CLDR data).
# 15. Check the file changes; then svn add or svn remove as necessary, and
# commit the changes.
cd $ICU4C_DIR/source
svn status
# add or remove as necessary, then commit
cd $ICU4J_ROOT
svn status
# add or remove as necessary, then commit
# 16. For an official CLDR data integration into ICU, now tag the CLDR, ICU4J,
# and ICU4C sources with an appropriate CLDR milestone (you can check previous
# tags for format), e.g.:
svn copy svn+ssh://unicode.org/repos/cldr/trunk \
svn+ssh://unicode.org/repos/cldr/tags/release-NNN \
--parents -m "cldrbug nnnn: tag cldr sources for NNN"
svn copy svn+ssh://source.icu-project.org/repos/icu/icu4j/trunk \
svn+ssh://source.icu-project.org/repos/icu/icu4j/tags/cldr-NNN \
--parents -m 'ticket:mmmm: tag the version used for integrating CLDR NNN'
svn copy svn+ssh://source.icu-project.org/repos/icu/icu/trunk \
svn+ssh://source.icu-project.org/repos/icu/icu/tags/cldr-NNN \
--parents -m 'ticket:mmmm: tag the version used for integrating CLDR NNN'