/** @file
Simple Text Out protocol from the UEFI 2.0 specification.
Abstraction of a very simple text based output device like VGA text mode or
a serial terminal. The Simple Text Out protocol instance can represent
a single hardware device or a virtual device that is an aggregation
of multiple physical devices.
Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __SIMPLE_TEXT_OUT_H__
#define __SIMPLE_TEXT_OUT_H__
#define EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL_GUID \
{ \
0x387477c2, 0x69c7, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \
}
///
/// Protocol GUID defined in EFI1.1.
///
#define SIMPLE_TEXT_OUTPUT_PROTOCOL EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL_GUID
typedef struct _EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL;
///
/// Backward-compatible with EFI1.1.
///
typedef EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL SIMPLE_TEXT_OUTPUT_INTERFACE;
//
// Define's for required EFI Unicode Box Draw characters
//
#define BOXDRAW_HORIZONTAL 0x2500
#define BOXDRAW_VERTICAL 0x2502
#define BOXDRAW_DOWN_RIGHT 0x250c
#define BOXDRAW_DOWN_LEFT 0x2510
#define BOXDRAW_UP_RIGHT 0x2514
#define BOXDRAW_UP_LEFT 0x2518
#define BOXDRAW_VERTICAL_RIGHT 0x251c
#define BOXDRAW_VERTICAL_LEFT 0x2524
#define BOXDRAW_DOWN_HORIZONTAL 0x252c
#define BOXDRAW_UP_HORIZONTAL 0x2534
#define BOXDRAW_VERTICAL_HORIZONTAL 0x253c
#define BOXDRAW_DOUBLE_HORIZONTAL 0x2550
#define BOXDRAW_DOUBLE_VERTICAL 0x2551
#define BOXDRAW_DOWN_RIGHT_DOUBLE 0x2552
#define BOXDRAW_DOWN_DOUBLE_RIGHT 0x2553
#define BOXDRAW_DOUBLE_DOWN_RIGHT 0x2554
#define BOXDRAW_DOWN_LEFT_DOUBLE 0x2555
#define BOXDRAW_DOWN_DOUBLE_LEFT 0x2556
#define BOXDRAW_DOUBLE_DOWN_LEFT 0x2557
#define BOXDRAW_UP_RIGHT_DOUBLE 0x2558
#define BOXDRAW_UP_DOUBLE_RIGHT 0x2559
#define BOXDRAW_DOUBLE_UP_RIGHT 0x255a
#define BOXDRAW_UP_LEFT_DOUBLE 0x255b
#define BOXDRAW_UP_DOUBLE_LEFT 0x255c
#define BOXDRAW_DOUBLE_UP_LEFT 0x255d
#define BOXDRAW_VERTICAL_RIGHT_DOUBLE 0x255e
#define BOXDRAW_VERTICAL_DOUBLE_RIGHT 0x255f
#define BOXDRAW_DOUBLE_VERTICAL_RIGHT 0x2560
#define BOXDRAW_VERTICAL_LEFT_DOUBLE 0x2561
#define BOXDRAW_VERTICAL_DOUBLE_LEFT 0x2562
#define BOXDRAW_DOUBLE_VERTICAL_LEFT 0x2563
#define BOXDRAW_DOWN_HORIZONTAL_DOUBLE 0x2564
#define BOXDRAW_DOWN_DOUBLE_HORIZONTAL 0x2565
#define BOXDRAW_DOUBLE_DOWN_HORIZONTAL 0x2566
#define BOXDRAW_UP_HORIZONTAL_DOUBLE 0x2567
#define BOXDRAW_UP_DOUBLE_HORIZONTAL 0x2568
#define BOXDRAW_DOUBLE_UP_HORIZONTAL 0x2569
#define BOXDRAW_VERTICAL_HORIZONTAL_DOUBLE 0x256a
#define BOXDRAW_VERTICAL_DOUBLE_HORIZONTAL 0x256b
#define BOXDRAW_DOUBLE_VERTICAL_HORIZONTAL 0x256c
//
// EFI Required Block Elements Code Chart
//
#define BLOCKELEMENT_FULL_BLOCK 0x2588
#define BLOCKELEMENT_LIGHT_SHADE 0x2591
//
// EFI Required Geometric Shapes Code Chart
//
#define GEOMETRICSHAPE_UP_TRIANGLE 0x25b2
#define GEOMETRICSHAPE_RIGHT_TRIANGLE 0x25ba
#define GEOMETRICSHAPE_DOWN_TRIANGLE 0x25bc
#define GEOMETRICSHAPE_LEFT_TRIANGLE 0x25c4
//
// EFI Required Arrow shapes
//
#define ARROW_LEFT 0x2190
#define ARROW_UP 0x2191
#define ARROW_RIGHT 0x2192
#define ARROW_DOWN 0x2193
//
// EFI Console Colours
//
#define EFI_BLACK 0x00
#define EFI_BLUE 0x01
#define EFI_GREEN 0x02
#define EFI_CYAN (EFI_BLUE | EFI_GREEN)
#define EFI_RED 0x04
#define EFI_MAGENTA (EFI_BLUE | EFI_RED)
#define EFI_BROWN (EFI_GREEN | EFI_RED)
#define EFI_LIGHTGRAY (EFI_BLUE | EFI_GREEN | EFI_RED)
#define EFI_BRIGHT 0x08
#define EFI_DARKGRAY (EFI_BLACK | EFI_BRIGHT)
#define EFI_LIGHTBLUE (EFI_BLUE | EFI_BRIGHT)
#define EFI_LIGHTGREEN (EFI_GREEN | EFI_BRIGHT)
#define EFI_LIGHTCYAN (EFI_CYAN | EFI_BRIGHT)
#define EFI_LIGHTRED (EFI_RED | EFI_BRIGHT)
#define EFI_LIGHTMAGENTA (EFI_MAGENTA | EFI_BRIGHT)
#define EFI_YELLOW (EFI_BROWN | EFI_BRIGHT)
#define EFI_WHITE (EFI_BLUE | EFI_GREEN | EFI_RED | EFI_BRIGHT)
//
// Macro to accept color values in their raw form to create
// a value that represents both a foreground and background
// color in a single byte.
// For Foreground, and EFI_* value is valid from EFI_BLACK(0x00) to
// EFI_WHITE (0x0F).
// For Background, only EFI_BLACK, EFI_BLUE, EFI_GREEN, EFI_CYAN,
// EFI_RED, EFI_MAGENTA, EFI_BROWN, and EFI_LIGHTGRAY are acceptable
//
// Do not use EFI_BACKGROUND_xxx values with this macro.
//
#define EFI_TEXT_ATTR(Foreground,Background) ((Foreground) | ((Background) << 4))
#define EFI_BACKGROUND_BLACK 0x00
#define EFI_BACKGROUND_BLUE 0x10
#define EFI_BACKGROUND_GREEN 0x20
#define EFI_BACKGROUND_CYAN (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN)
#define EFI_BACKGROUND_RED 0x40
#define EFI_BACKGROUND_MAGENTA (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_RED)
#define EFI_BACKGROUND_BROWN (EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED)
#define EFI_BACKGROUND_LIGHTGRAY (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED)
//
// We currently define attributes from 0 - 7F for color manipulations
// To internally handle the local display characteristics for a particular character,
// Bit 7 signifies the local glyph representation for a character. If turned on, glyphs will be
// pulled from the wide glyph database and will display locally as a wide character (16 X 19 versus 8 X 19)
// If bit 7 is off, the narrow glyph database will be used. This does NOT affect information that is sent to
// non-local displays, such as serial or LAN consoles.
//
#define EFI_WIDE_ATTRIBUTE 0x80
/**
Reset the text output device hardware and optionaly run diagnostics
@param This The protocol instance pointer.
@param ExtendedVerification Driver may perform more exhaustive verfication
operation of the device during reset.
@retval EFI_SUCCESS The text output device was reset.
@retval EFI_DEVICE_ERROR The text output device is not functioning correctly and
could not be reset.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TEXT_RESET)(
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
);
/**
Write a string to the output device.
@param This The protocol instance pointer.
@param String The NULL-terminated string to be displayed on the output
device(s). All output devices must also support the Unicode
drawing character codes defined in this file.
@retval EFI_SUCCESS The string was output to the device.
@retval EFI_DEVICE_ERROR The device reported an error while attempting to output
the text.
@retval EFI_UNSUPPORTED The output device's mode is not currently in a
defined text mode.
@retval EFI_WARN_UNKNOWN_GLYPH This warning code indicates that some of the
characters in the string could not be
rendered and were skipped.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TEXT_STRING)(
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
IN CHAR16 *String
);
/**
Verifies that all characters in a string can be output to the
target device.
@param This The protocol instance pointer.
@param String The NULL-terminated string to be examined for the output
device(s).
@retval EFI_SUCCESS The device(s) are capable of rendering the output string.
@retval EFI_UNSUPPORTED Some of the characters in the string cannot be
rendered by one or more of the output devices mapped
by the EFI handle.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TEXT_TEST_STRING)(
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
IN CHAR16 *String
);
/**
Returns information for an available text mode that the output device(s)
supports.
@param This The protocol instance pointer.
@param ModeNumber The mode number to return information on.
@param Columns Returns the geometry of the text output device for the
requested ModeNumber.
@param Rows Returns the geometry of the text output device for the
requested ModeNumber.
@retval EFI_SUCCESS The requested mode information was returned.
@retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
@retval EFI_UNSUPPORTED The mode number was not valid.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TEXT_QUERY_MODE)(
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
IN UINTN ModeNumber,
OUT UINTN *Columns,
OUT UINTN *Rows
);
/**
Sets the output device(s) to a specified mode.
@param This The protocol instance pointer.
@param ModeNumber The mode number to set.
@retval EFI_SUCCESS The requested text mode was set.
@retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
@retval EFI_UNSUPPORTED The mode number was not valid.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TEXT_SET_MODE)(
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
IN UINTN ModeNumber
);
/**
Sets the background and foreground colors for the OutputString () and
ClearScreen () functions.
@param This The protocol instance pointer.
@param Attribute The attribute to set. Bits 0..3 are the foreground color, and
bits 4..6 are the background color. All other bits are undefined
and must be zero. The valid Attributes are defined in this file.
@retval EFI_SUCCESS The attribute was set.
@retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
@retval EFI_UNSUPPORTED The attribute requested is not defined.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TEXT_SET_ATTRIBUTE)(
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
IN UINTN Attribute
);
/**
Clears the output device(s) display to the currently selected background
color.
@param This The protocol instance pointer.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
@retval EFI_UNSUPPORTED The output device is not in a valid text mode.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TEXT_CLEAR_SCREEN)(
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This
);
/**
Sets the current coordinates of the cursor position
@param This The protocol instance pointer.
@param Column The position to set the cursor to. Must be greater than or
equal to zero and less than the number of columns and rows
by QueryMode ().
@param Row The position to set the cursor to. Must be greater than or
equal to zero and less than the number of columns and rows
by QueryMode ().
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_DEVICE_ERROR The device had an error and could not complete the request.
@retval EFI_UNSUPPORTED The output device is not in a valid text mode, or the
cursor position is invalid for the current mode.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TEXT_SET_CURSOR_POSITION)(
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
IN UINTN Column,
IN UINTN Row
);
/**
Makes the cursor visible or invisible
@param This The protocol instance pointer.
@param Visible If TRUE, the cursor is set to be visible. If FALSE, the cursor is
set to be invisible.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_DEVICE_ERROR The device had an error and could not complete the
request, or the device does not support changing
the cursor mode.
@retval EFI_UNSUPPORTED The output device is not in a valid text mode.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_TEXT_ENABLE_CURSOR)(
IN EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL *This,
IN BOOLEAN Visible
);
/**
@par Data Structure Description:
Mode Structure pointed to by Simple Text Out protocol.
**/
typedef struct {
///
/// The number of modes supported by QueryMode () and SetMode ().
///
INT32 MaxMode;
//
// current settings
//
///
/// The text mode of the output device(s).
///
INT32 Mode;
///
/// The current character output attribute.
///
INT32 Attribute;
///
/// The cursor's column.
///
INT32 CursorColumn;
///
/// The cursor's row.
///
INT32 CursorRow;
///
/// The cursor is currently visbile or not.
///
BOOLEAN CursorVisible;
} EFI_SIMPLE_TEXT_OUTPUT_MODE;
///
/// The SIMPLE_TEXT_OUTPUT protocol is used to control text-based output devices.
/// It is the minimum required protocol for any handle supplied as the ConsoleOut
/// or StandardError device. In addition, the minimum supported text mode of such
/// devices is at least 80 x 25 characters.
///
struct _EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL {
EFI_TEXT_RESET Reset;
EFI_TEXT_STRING OutputString;
EFI_TEXT_TEST_STRING TestString;
EFI_TEXT_QUERY_MODE QueryMode;
EFI_TEXT_SET_MODE SetMode;
EFI_TEXT_SET_ATTRIBUTE SetAttribute;
EFI_TEXT_CLEAR_SCREEN ClearScreen;
EFI_TEXT_SET_CURSOR_POSITION SetCursorPosition;
EFI_TEXT_ENABLE_CURSOR EnableCursor;
///
/// Pointer to SIMPLE_TEXT_OUTPUT_MODE data.
///
EFI_SIMPLE_TEXT_OUTPUT_MODE *Mode;
};
extern EFI_GUID gEfiSimpleTextOutProtocolGuid;
#endif