/*
* Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __FVP_DEF_H__
#define __FVP_DEF_H__
/* Firmware Image Package */
#define FIP_IMAGE_NAME "fip.bin"
#define FVP_PRIMARY_CPU 0x0
/* Memory location options for TSP */
#define FVP_TRUSTED_SRAM_ID 0
#define FVP_TRUSTED_DRAM_ID 1
#define FVP_DRAM_ID 2
/*
* Some of the definitions in this file use the 'ull' suffix in order to avoid
* subtle integer overflow errors due to implicit integer type promotion when
* working with 32-bit values.
*
* The TSP linker script includes some of these definitions to define the BL3-2
* memory map, but the GNU LD does not support the 'ull' suffix, causing the
* build process to fail. To solve this problem, the auxiliary macro MAKE_ULL(x)
* will add the 'ull' suffix only when the macro __LINKER__ is not defined
* (__LINKER__ is defined in the command line to preprocess the linker script).
* Constants in the linker script will not have the 'ull' suffix, but this is
* not a problem since the linker evaluates all constant expressions to 64 bit
* (assuming the target architecture is 64 bit).
*/
#ifndef __LINKER__
#define MAKE_ULL(x) x##ull
#else
#define MAKE_ULL(x) x
#endif
/*******************************************************************************
* FVP memory map related constants
******************************************************************************/
#define FVP_TRUSTED_ROM_BASE 0x00000000
#define FVP_TRUSTED_ROM_SIZE 0x04000000 /* 64 MB */
/* The first 4KB of Trusted SRAM are used as shared memory */
#define FVP_SHARED_MEM_BASE 0x04000000
#define FVP_SHARED_MEM_SIZE 0x00001000 /* 4 KB */
/* The remaining Trusted SRAM is used to load the BL images */
#define FVP_TRUSTED_SRAM_BASE 0x04001000
#define FVP_TRUSTED_SRAM_SIZE 0x0003F000 /* 252 KB */
#define FVP_TRUSTED_DRAM_BASE 0x06000000
#define FVP_TRUSTED_DRAM_SIZE 0x02000000 /* 32 MB */
#define FLASH0_BASE 0x08000000
#define FLASH0_SIZE 0x04000000
#define FLASH1_BASE 0x0c000000
#define FLASH1_SIZE 0x04000000
#define PSRAM_BASE 0x14000000
#define PSRAM_SIZE 0x04000000
#define VRAM_BASE 0x18000000
#define VRAM_SIZE 0x02000000
/* Aggregate of all devices in the first GB */
#define DEVICE0_BASE 0x1a000000
#define DEVICE0_SIZE 0x12200000
#define DEVICE1_BASE 0x2f000000
#define DEVICE1_SIZE 0x200000
#define NSRAM_BASE 0x2e000000
#define NSRAM_SIZE 0x10000
#define DRAM1_BASE MAKE_ULL(0x80000000)
#define DRAM1_SIZE MAKE_ULL(0x80000000)
#define DRAM1_END (DRAM1_BASE + DRAM1_SIZE - 1)
/* Define the top 16 MB of DRAM1 as secure */
#define DRAM1_SEC_SIZE MAKE_ULL(0x01000000)
#define DRAM1_SEC_BASE (DRAM1_BASE + DRAM1_SIZE - DRAM1_SEC_SIZE)
#define DRAM1_SEC_END (DRAM1_SEC_BASE + DRAM1_SEC_SIZE - 1)
#define DRAM1_NS_BASE DRAM1_BASE
#define DRAM1_NS_SIZE (DRAM1_SIZE - DRAM1_SEC_SIZE)
#define DRAM1_NS_END (DRAM1_NS_BASE + DRAM1_NS_SIZE - 1)
#define DRAM_BASE DRAM1_BASE
#define DRAM_SIZE DRAM1_SIZE
#define DRAM2_BASE MAKE_ULL(0x880000000)
#define DRAM2_SIZE MAKE_ULL(0x780000000)
#define DRAM2_END (DRAM2_BASE + DRAM2_SIZE - 1)
#define PCIE_EXP_BASE 0x40000000
#define TZRNG_BASE 0x7fe60000
#define TZNVCTR_BASE 0x7fe70000
#define TZROOTKEY_BASE 0x7fe80000
/* Memory mapped Generic timer interfaces */
#define SYS_CNTCTL_BASE 0x2a430000
#define SYS_CNTREAD_BASE 0x2a800000
#define SYS_TIMCTL_BASE 0x2a810000
/* V2M motherboard system registers & offsets */
#define VE_SYSREGS_BASE 0x1c010000
#define V2M_SYS_ID 0x0
#define V2M_SYS_SWITCH 0x4
#define V2M_SYS_LED 0x8
#define V2M_SYS_CFGDATA 0xa0
#define V2M_SYS_CFGCTRL 0xa4
#define V2M_SYS_CFGSTATUS 0xa8
#define CFGCTRL_START (1 << 31)
#define CFGCTRL_RW (1 << 30)
#define CFGCTRL_FUNC_SHIFT 20
#define CFGCTRL_FUNC(fn) (fn << CFGCTRL_FUNC_SHIFT)
#define FUNC_CLK_GEN 0x01
#define FUNC_TEMP 0x04
#define FUNC_DB_RESET 0x05
#define FUNC_SCC_CFG 0x06
#define FUNC_SHUTDOWN 0x08
#define FUNC_REBOOT 0x09
/* Load address of BL33 in the FVP port */
#define NS_IMAGE_OFFSET (DRAM1_BASE + 0x8000000) /* DRAM + 128MB */
/* Special value used to verify platform parameters from BL2 to BL3-1 */
#define FVP_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
/*
* V2M sysled bit definitions. The values written to this
* register are defined in arch.h & runtime_svc.h. Only
* used by the primary cpu to diagnose any cold boot issues.
*
* SYS_LED[0] - Security state (S=0/NS=1)
* SYS_LED[2:1] - Exception Level (EL3-EL0)
* SYS_LED[7:3] - Exception Class (Sync/Async & origin)
*
*/
#define SYS_LED_SS_SHIFT 0x0
#define SYS_LED_EL_SHIFT 0x1
#define SYS_LED_EC_SHIFT 0x3
#define SYS_LED_SS_MASK 0x1
#define SYS_LED_EL_MASK 0x3
#define SYS_LED_EC_MASK 0x1f
/* V2M sysid register bits */
#define SYS_ID_REV_SHIFT 28
#define SYS_ID_HBI_SHIFT 16
#define SYS_ID_BLD_SHIFT 12
#define SYS_ID_ARCH_SHIFT 8
#define SYS_ID_FPGA_SHIFT 0
#define SYS_ID_REV_MASK 0xf
#define SYS_ID_HBI_MASK 0xfff
#define SYS_ID_BLD_MASK 0xf
#define SYS_ID_ARCH_MASK 0xf
#define SYS_ID_FPGA_MASK 0xff
#define SYS_ID_BLD_LENGTH 4
#define HBI_FVP_BASE 0x020
#define REV_FVP_BASE_V0 0x0
#define HBI_FOUNDATION 0x010
#define REV_FOUNDATION_V2_0 0x0
#define REV_FOUNDATION_V2_1 0x1
#define BLD_GIC_VE_MMAP 0x0
#define BLD_GIC_A53A57_MMAP 0x1
#define ARCH_MODEL 0x1
/* FVP Power controller base address*/
#define PWRC_BASE 0x1c100000
/*******************************************************************************
* CCI-400 related constants
******************************************************************************/
#define CCI400_BASE 0x2c090000
#define CCI400_SL_IFACE3_CLUSTER_IX 0
#define CCI400_SL_IFACE4_CLUSTER_IX 1
/*******************************************************************************
* GIC-400 & interrupt handling related constants
******************************************************************************/
/* VE compatible GIC memory map */
#define VE_GICD_BASE 0x2c001000
#define VE_GICC_BASE 0x2c002000
#define VE_GICH_BASE 0x2c004000
#define VE_GICV_BASE 0x2c006000
/* Base FVP compatible GIC memory map */
#define BASE_GICD_BASE 0x2f000000
#define BASE_GICR_BASE 0x2f100000
#define BASE_GICC_BASE 0x2c000000
#define BASE_GICH_BASE 0x2c010000
#define BASE_GICV_BASE 0x2c02f000
#define IRQ_TZ_WDOG 56
#define IRQ_SEC_PHY_TIMER 29
#define IRQ_SEC_SGI_0 8
#define IRQ_SEC_SGI_1 9
#define IRQ_SEC_SGI_2 10
#define IRQ_SEC_SGI_3 11
#define IRQ_SEC_SGI_4 12
#define IRQ_SEC_SGI_5 13
#define IRQ_SEC_SGI_6 14
#define IRQ_SEC_SGI_7 15
/*******************************************************************************
* PL011 related constants
******************************************************************************/
#define PL011_UART0_BASE 0x1c090000
#define PL011_UART1_BASE 0x1c0a0000
#define PL011_UART2_BASE 0x1c0b0000
#define PL011_UART3_BASE 0x1c0c0000
#define PL011_BAUDRATE 115200
#define PL011_UART0_CLK_IN_HZ 24000000
#define PL011_UART1_CLK_IN_HZ 24000000
#define PL011_UART2_CLK_IN_HZ 24000000
#define PL011_UART3_CLK_IN_HZ 24000000
/*******************************************************************************
* TrustZone address space controller related constants
******************************************************************************/
#define TZC400_BASE 0x2a4a0000
/*
* The NSAIDs for this platform as used to program the TZC400.
*/
/* NSAIDs used by devices in TZC filter 0 on FVP */
#define FVP_NSAID_DEFAULT 0
#define FVP_NSAID_PCI 1
#define FVP_NSAID_VIRTIO 8 /* from FVP v5.6 onwards */
#define FVP_NSAID_AP 9 /* Application Processors */
#define FVP_NSAID_VIRTIO_OLD 15 /* until FVP v5.5 */
/* NSAIDs used by devices in TZC filter 2 on FVP */
#define FVP_NSAID_HDLCD0 2
#define FVP_NSAID_CLCD 7
/*******************************************************************************
* Shared Data
******************************************************************************/
/* Entrypoint mailboxes */
#define MBOX_BASE FVP_SHARED_MEM_BASE
#define MBOX_SIZE 0x200
/* Base address where parameters to BL31 are stored */
#define PARAMS_BASE (MBOX_BASE + MBOX_SIZE)
#endif /* __FVP_DEF_H__ */