/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @addtogroup Media Camera
* @{
*/
/**
* @file NdkImageReader.h
*/
/*
* This file defines an NDK API.
* Do not remove methods.
* Do not change method signatures.
* Do not change the value of constants.
* Do not change the size of any of the classes defined in here.
* Do not reference types that are not part of the NDK.
* Do not #include files that aren't part of the NDK.
*/
#ifndef _NDK_IMAGE_READER_H
#define _NDK_IMAGE_READER_H
#include <android/native_window.h>
#include "NdkMediaError.h"
#include "NdkImage.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* AImage is an opaque type that allows direct application access to image data rendered into a
* {@link ANativeWindow}.
*/
typedef struct AImageReader AImageReader;
/**
* Create a new reader for images of the desired size and format.
*
* <p>
* The maxImages parameter determines the maximum number of {@link AImage} objects that can be
* acquired from the {@link AImageReader} simultaneously. Requesting more buffers will use up
* more memory, so it is important to use only the minimum number necessary for the use case.
* </p>
* <p>
* The valid sizes and formats depend on the source of the image data.
* </p>
*
* @param width The default width in pixels of the Images that this reader will produce.
* @param height The default height in pixels of the Images that this reader will produce.
* @param format The format of the Image that this reader will produce. This must be one of the
* AIMAGE_FORMAT_* enum value defined in {@link AIMAGE_FORMATS}. Note that not all
* formats are supported, like {@link AIMAGE_FORMAT_PRIVATE}.
* @param maxImages The maximum number of images the user will want to access simultaneously. This
* should be as small as possible to limit memory use. Once maxImages Images are obtained
* by the user, one of them has to be released before a new {@link AImage} will become
* available for access through {@link AImageReader_acquireLatestImage} or
* {@link AImageReader_acquireNextImage}. Must be greater than 0.
* @param reader The created image reader will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if reader is NULL, or one or more of width,
* height, format, maxImages arguments is not supported.</li>
* <li>{@link AMEDIA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul>
*
* @see AImage
*/
media_status_t AImageReader_new(
int32_t width, int32_t height, int32_t format, int32_t maxImages,
/*out*/AImageReader** reader);
/**
* Delete an {@link AImageReader} and return all images generated by this reader to system.
*
* <p>This method will return all {@link AImage} objects acquired by this reader (via
* {@link AImageReader_acquireNextImage} or {@link AImageReader_acquireLatestImage}) to system,
* making any of data pointers obtained from {@link AImage_getPlaneData} invalid. Do NOT access
* the reader object or any of those data pointers after this method returns.</p>
*
* @param reader The image reader to be deleted.
*/
void AImageReader_delete(AImageReader* reader);
/**
* Get a {@link ANativeWindow} that can be used to produce {@link AImage} for this image reader.
*
* @param reader The image reader of interest.
* @param window The output {@link ANativeWindow} will be filled here if the method call succeeds.
* The {@link ANativeWindow} is managed by this image reader. Do NOT call
* {@link ANativeWindow_release} on it. Instead, use {@link AImageReader_delete}.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if reader or window is NULL.</li></ul>
*/
media_status_t AImageReader_getWindow(AImageReader* reader, /*out*/ANativeWindow** window);
/**
* Query the default width of the {@link AImage} generated by this reader, in pixels.
*
* <p>The width may be overridden by the producer sending buffers to this reader's
* {@link ANativeWindow}. If so, the actual width of the images can be found using
* {@link AImage_getWidth}.</p>
*
* @param reader The image reader of interest.
* @param width the default width of the reader will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if reader or width is NULL.</li></ul>
*/
media_status_t AImageReader_getWidth(const AImageReader* reader, /*out*/int32_t* width);
/**
* Query the default height of the {@link AImage} generated by this reader, in pixels.
*
* <p>The height may be overridden by the producer sending buffers to this reader's
* {@link ANativeWindow}. If so, the actual height of the images can be found using
* {@link AImage_getHeight}.</p>
*
* @param reader The image reader of interest.
* @param height the default height of the reader will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if reader or height is NULL.</li></ul>
*/
media_status_t AImageReader_getHeight(const AImageReader* reader, /*out*/int32_t* height);
/**
* Query the format of the {@link AImage} generated by this reader.
*
* @param reader The image reader of interest.
* @param format the fromat of the reader will be filled here if the method call succeeeds. The
* value will be one of the AIMAGE_FORMAT_* enum value defiend in {@link NdkImage.h}.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if reader or format is NULL.</li></ul>
*/
media_status_t AImageReader_getFormat(const AImageReader* reader, /*out*/int32_t* format);
/**
* Query the maximum number of concurrently acquired {@link AImage}s of this reader.
*
* @param reader The image reader of interest.
* @param maxImages the maximum number of concurrently acquired images of the reader will be filled
* here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if reader or maxImages is NULL.</li></ul>
*/
media_status_t AImageReader_getMaxImages(const AImageReader* reader, /*out*/int32_t* maxImages);
/**
* Acquire the next {@link AImage} from the image reader's queue.
*
* <p>Warning: Consider using {@link AImageReader_acquireLatestImage} instead, as it will
* automatically release older images, and allow slower-running processing routines to catch
* up to the newest frame. Usage of {@link AImageReader_acquireNextImage} is recommended for
* batch/background processing. Incorrectly using this method can cause images to appear
* with an ever-increasing delay, followed by a complete stall where no new images seem to appear.
* </p>
*
* <p>
* This method will fail if {@link AImageReader_getMaxImages maxImages} have been acquired with
* {@link AImageReader_acquireNextImage} or {@link AImageReader_acquireLatestImage}. In particular
* a sequence of {@link AImageReader_acquireNextImage} or {@link AImageReader_acquireLatestImage}
* calls greater than {@link AImageReader_getMaxImages maxImages} without calling
* {@link AImage_delete} in-between will exhaust the underlying queue. At such a time,
* {@link AMEDIA_IMGREADER_MAX_IMAGES_ACQUIRED} will be returned until more images are released with
* {@link AImage_delete}.
* </p>
*
* @param reader The image reader of interest.
* @param image the acquired {@link AImage} will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if reader or image is NULL.</li>
* <li>{@link AMEDIA_IMGREADER_MAX_IMAGES_ACQUIRED} if the number of concurrently acquired
* images has reached the limit.</li>
* <li>{@link AMEDIA_IMGREADER_NO_BUFFER_AVAILABLE} if there is no buffers currently
* available in the reader queue.</li>
* <li>{@link AMEDIA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul>
*
* @see AImageReader_acquireLatestImage
*/
media_status_t AImageReader_acquireNextImage(AImageReader* reader, /*out*/AImage** image);
/**
* Acquire the latest {@link AImage} from the image reader's queue, dropping older images.
*
* <p>
* This operation will acquire all the images possible from the image reader, but
* {@link AImage_delete} all images that aren't the latest. This function is recommended to use over
* {@link AImageReader_acquireNextImage} for most use-cases, as it's more suited for real-time
* processing.
* </p>
* <p>
* Note that {@link AImageReader_getMaxImages maxImages} should be at least 2 for
* {@link AImageReader_acquireLatestImage} to be any different than
* {@link AImageReader_acquireNextImage} - discarding all-but-the-newest {@link AImage} requires
* temporarily acquiring two {@link AImage}s at once. Or more generally, calling
* {@link AImageReader_acquireLatestImage} with less than two images of margin, that is
* (maxImages - currentAcquiredImages < 2) will not discard as expected.
* </p>
* <p>
* This method will fail if {@link AImageReader_getMaxImages maxImages} have been acquired with
* {@link AImageReader_acquireNextImage} or {@link AImageReader_acquireLatestImage}. In particular
* a sequence of {@link AImageReader_acquireNextImage} or {@link AImageReader_acquireLatestImage}
* calls greater than {@link AImageReader_getMaxImages maxImages} without calling
* {@link AImage_delete} in-between will exhaust the underlying queue. At such a time,
* {@link AMEDIA_IMGREADER_MAX_IMAGES_ACQUIRED} will be returned until more images are released with
* {@link AImage_delete}.
* </p>
*
* @param reader The image reader of interest.
* @param image the acquired {@link AImage} will be filled here if the method call succeeeds.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if reader or image is NULL.</li>
* <li>{@link AMEDIA_IMGREADER_MAX_IMAGES_ACQUIRED} if the number of concurrently acquired
* images has reached the limit.</li>
* <li>{@link AMEDIA_IMGREADER_NO_BUFFER_AVAILABLE} if there is no buffers currently
* available in the reader queue.</li>
* <li>{@link AMEDIA_ERROR_UNKNOWN} if the method fails for some other reasons.</li></ul>
*
* @see AImageReader_acquireNextImage
*/
media_status_t AImageReader_acquireLatestImage(AImageReader* reader, /*out*/AImage** image);
/**
* The definition of {@link AImageReader} new image available callback.
*
* @param context The optional application context provided by user in
* {@link AImageReader_setImageListener}.
* @param session The camera capture session whose state is changing.
*/
typedef void (*AImageReader_ImageCallback)(void* context, AImageReader* reader);
typedef struct AImageReader_ImageListener {
/// optional application context.
void* context;
/**
* This callback is called when there is a new image available for in the image reader's queue.
*
* <p>The callback happens on one dedicated thread per {@link AImageReader} instance. It is okay
* to use AImageReader_* and AImage_* methods within the callback. Note that it is possible that
* calling {@link AImageReader_acquireNextImage} or {@link AImageReader_acquireLatestImage}
* returns {@link AMEDIA_IMGREADER_NO_BUFFER_AVAILABLE} within this callback. For example, when
* there are multiple images and callbacks queued, if application called
* {@link AImageReader_acquireLatestImage}, some images will be returned to system before their
* corresponding callback is executed.</p>
*/
AImageReader_ImageCallback onImageAvailable;
} AImageReader_ImageListener;
/**
* Set the onImageAvailable listener of this image reader.
*
* <p>Note that calling this method will replace previously registered listeners.</p>
*
* @param reader The image reader of interest.
* @param listener the {@link AImageReader_ImageListener} to be registered. Set this to NULL if
* application no longer needs to listen to new images.
*
* @return <ul>
* <li>{@link AMEDIA_OK} if the method call succeeds.</li>
* <li>{@link AMEDIA_ERROR_INVALID_PARAMETER} if reader is NULL.</li></ul>
*/
media_status_t AImageReader_setImageListener(
AImageReader* reader, AImageReader_ImageListener* listener);
#ifdef __cplusplus
} // extern "C"
#endif
#endif //_NDK_IMAGE_READER_H
/** @} */