/*
* WPA Supplicant - Basic mesh peer management
* Copyright (c) 2013-2014, cozybit, Inc. All rights reserved.
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "utils/includes.h"
#include "utils/common.h"
#include "utils/eloop.h"
#include "common/ieee802_11_defs.h"
#include "common/hw_features_common.h"
#include "ap/hostapd.h"
#include "ap/sta_info.h"
#include "ap/ieee802_11.h"
#include "ap/wpa_auth.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "mesh_mpm.h"
#include "mesh_rsn.h"
struct mesh_peer_mgmt_ie {
const u8 *proto_id; /* Mesh Peering Protocol Identifier (2 octets) */
const u8 *llid; /* Local Link ID (2 octets) */
const u8 *plid; /* Peer Link ID (conditional, 2 octets) */
const u8 *reason; /* Reason Code (conditional, 2 octets) */
const u8 *chosen_pmk; /* Chosen PMK (optional, 16 octets) */
};
static void plink_timer(void *eloop_ctx, void *user_data);
enum plink_event {
PLINK_UNDEFINED,
OPN_ACPT,
OPN_RJCT,
CNF_ACPT,
CNF_RJCT,
CLS_ACPT,
REQ_RJCT
};
static const char * const mplstate[] = {
[0] = "UNINITIALIZED",
[PLINK_IDLE] = "IDLE",
[PLINK_OPN_SNT] = "OPN_SNT",
[PLINK_OPN_RCVD] = "OPN_RCVD",
[PLINK_CNF_RCVD] = "CNF_RCVD",
[PLINK_ESTAB] = "ESTAB",
[PLINK_HOLDING] = "HOLDING",
[PLINK_BLOCKED] = "BLOCKED"
};
static const char * const mplevent[] = {
[PLINK_UNDEFINED] = "UNDEFINED",
[OPN_ACPT] = "OPN_ACPT",
[OPN_RJCT] = "OPN_RJCT",
[CNF_ACPT] = "CNF_ACPT",
[CNF_RJCT] = "CNF_RJCT",
[CLS_ACPT] = "CLS_ACPT",
[REQ_RJCT] = "REQ_RJCT",
};
static int mesh_mpm_parse_peer_mgmt(struct wpa_supplicant *wpa_s,
u8 action_field,
const u8 *ie, size_t len,
struct mesh_peer_mgmt_ie *mpm_ie)
{
os_memset(mpm_ie, 0, sizeof(*mpm_ie));
/* Remove optional Chosen PMK field at end */
if (len >= SAE_PMKID_LEN) {
mpm_ie->chosen_pmk = ie + len - SAE_PMKID_LEN;
len -= SAE_PMKID_LEN;
}
if ((action_field == PLINK_OPEN && len != 4) ||
(action_field == PLINK_CONFIRM && len != 6) ||
(action_field == PLINK_CLOSE && len != 6 && len != 8)) {
wpa_msg(wpa_s, MSG_DEBUG, "MPM: Invalid peer mgmt ie");
return -1;
}
/* required fields */
if (len < 4)
return -1;
mpm_ie->proto_id = ie;
mpm_ie->llid = ie + 2;
ie += 4;
len -= 4;
/* close reason is always present at end for close */
if (action_field == PLINK_CLOSE) {
if (len < 2)
return -1;
mpm_ie->reason = ie + len - 2;
len -= 2;
}
/* Peer Link ID, present for confirm, and possibly close */
if (len >= 2)
mpm_ie->plid = ie;
return 0;
}
static int plink_free_count(struct hostapd_data *hapd)
{
if (hapd->max_plinks > hapd->num_plinks)
return hapd->max_plinks - hapd->num_plinks;
return 0;
}
static u16 copy_supp_rates(struct wpa_supplicant *wpa_s,
struct sta_info *sta,
struct ieee802_11_elems *elems)
{
if (!elems->supp_rates) {
wpa_msg(wpa_s, MSG_ERROR, "no supported rates from " MACSTR,
MAC2STR(sta->addr));
return WLAN_STATUS_UNSPECIFIED_FAILURE;
}
if (elems->supp_rates_len + elems->ext_supp_rates_len >
sizeof(sta->supported_rates)) {
wpa_msg(wpa_s, MSG_ERROR,
"Invalid supported rates element length " MACSTR
" %d+%d", MAC2STR(sta->addr), elems->supp_rates_len,
elems->ext_supp_rates_len);
return WLAN_STATUS_UNSPECIFIED_FAILURE;
}
sta->supported_rates_len = merge_byte_arrays(
sta->supported_rates, sizeof(sta->supported_rates),
elems->supp_rates, elems->supp_rates_len,
elems->ext_supp_rates, elems->ext_supp_rates_len);
return WLAN_STATUS_SUCCESS;
}
/* return true if elems from a neighbor match this MBSS */
static Boolean matches_local(struct wpa_supplicant *wpa_s,
struct ieee802_11_elems *elems)
{
struct mesh_conf *mconf = wpa_s->ifmsh->mconf;
if (elems->mesh_config_len < 5)
return FALSE;
return (mconf->meshid_len == elems->mesh_id_len &&
os_memcmp(mconf->meshid, elems->mesh_id,
elems->mesh_id_len) == 0 &&
mconf->mesh_pp_id == elems->mesh_config[0] &&
mconf->mesh_pm_id == elems->mesh_config[1] &&
mconf->mesh_cc_id == elems->mesh_config[2] &&
mconf->mesh_sp_id == elems->mesh_config[3] &&
mconf->mesh_auth_id == elems->mesh_config[4]);
}
/* check if local link id is already used with another peer */
static Boolean llid_in_use(struct wpa_supplicant *wpa_s, u16 llid)
{
struct sta_info *sta;
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
for (sta = hapd->sta_list; sta; sta = sta->next) {
if (sta->my_lid == llid)
return TRUE;
}
return FALSE;
}
/* generate an llid for a link and set to initial state */
static void mesh_mpm_init_link(struct wpa_supplicant *wpa_s,
struct sta_info *sta)
{
u16 llid;
do {
if (os_get_random((u8 *) &llid, sizeof(llid)) < 0)
continue;
} while (!llid || llid_in_use(wpa_s, llid));
sta->my_lid = llid;
sta->peer_lid = 0;
sta->peer_aid = 0;
/*
* We do not use wpa_mesh_set_plink_state() here because there is no
* entry in kernel yet.
*/
sta->plink_state = PLINK_IDLE;
}
static void mesh_mpm_send_plink_action(struct wpa_supplicant *wpa_s,
struct sta_info *sta,
enum plink_action_field type,
u16 close_reason)
{
struct wpabuf *buf;
struct hostapd_iface *ifmsh = wpa_s->ifmsh;
struct hostapd_data *bss = ifmsh->bss[0];
struct mesh_conf *conf = ifmsh->mconf;
u8 supp_rates[2 + 2 + 32];
u8 *pos, *cat;
u8 ie_len, add_plid = 0;
int ret;
int ampe = conf->security & MESH_CONF_SEC_AMPE;
size_t buf_len;
if (!sta)
return;
buf_len = 2 + /* capability info */
2 + /* AID */
2 + 8 + /* supported rates */
2 + (32 - 8) +
2 + 32 + /* mesh ID */
2 + 7 + /* mesh config */
2 + 23 + /* peering management */
2 + 96 + /* AMPE */
2 + 16; /* MIC */
#ifdef CONFIG_IEEE80211N
if (type != PLINK_CLOSE && wpa_s->mesh_ht_enabled) {
buf_len += 2 + 26 + /* HT capabilities */
2 + 22; /* HT operation */
}
#endif /* CONFIG_IEEE80211N */
#ifdef CONFIG_IEEE80211AC
if (type != PLINK_CLOSE && wpa_s->mesh_vht_enabled) {
buf_len += 2 + 12 + /* VHT Capabilities */
2 + 5; /* VHT Operation */
}
#endif /* CONFIG_IEEE80211AC */
if (type != PLINK_CLOSE)
buf_len += conf->rsn_ie_len; /* RSN IE */
buf = wpabuf_alloc(buf_len);
if (!buf)
return;
cat = wpabuf_mhead_u8(buf);
wpabuf_put_u8(buf, WLAN_ACTION_SELF_PROTECTED);
wpabuf_put_u8(buf, type);
if (type != PLINK_CLOSE) {
u8 info;
/* capability info */
wpabuf_put_le16(buf, ampe ? IEEE80211_CAP_PRIVACY : 0);
/* aid */
if (type == PLINK_CONFIRM)
wpabuf_put_le16(buf, sta->aid);
/* IE: supp + ext. supp rates */
pos = hostapd_eid_supp_rates(bss, supp_rates);
pos = hostapd_eid_ext_supp_rates(bss, pos);
wpabuf_put_data(buf, supp_rates, pos - supp_rates);
/* IE: RSN IE */
wpabuf_put_data(buf, conf->rsn_ie, conf->rsn_ie_len);
/* IE: Mesh ID */
wpabuf_put_u8(buf, WLAN_EID_MESH_ID);
wpabuf_put_u8(buf, conf->meshid_len);
wpabuf_put_data(buf, conf->meshid, conf->meshid_len);
/* IE: mesh conf */
wpabuf_put_u8(buf, WLAN_EID_MESH_CONFIG);
wpabuf_put_u8(buf, 7);
wpabuf_put_u8(buf, conf->mesh_pp_id);
wpabuf_put_u8(buf, conf->mesh_pm_id);
wpabuf_put_u8(buf, conf->mesh_cc_id);
wpabuf_put_u8(buf, conf->mesh_sp_id);
wpabuf_put_u8(buf, conf->mesh_auth_id);
info = (bss->num_plinks > 63 ? 63 : bss->num_plinks) << 1;
/* TODO: Add Connected to Mesh Gate/AS subfields */
wpabuf_put_u8(buf, info);
/* always forwarding & accepting plinks for now */
wpabuf_put_u8(buf, MESH_CAP_ACCEPT_ADDITIONAL_PEER |
MESH_CAP_FORWARDING);
} else { /* Peer closing frame */
/* IE: Mesh ID */
wpabuf_put_u8(buf, WLAN_EID_MESH_ID);
wpabuf_put_u8(buf, conf->meshid_len);
wpabuf_put_data(buf, conf->meshid, conf->meshid_len);
}
/* IE: Mesh Peering Management element */
ie_len = 4;
if (ampe)
ie_len += PMKID_LEN;
switch (type) {
case PLINK_OPEN:
break;
case PLINK_CONFIRM:
ie_len += 2;
add_plid = 1;
break;
case PLINK_CLOSE:
ie_len += 2;
add_plid = 1;
ie_len += 2; /* reason code */
break;
}
wpabuf_put_u8(buf, WLAN_EID_PEER_MGMT);
wpabuf_put_u8(buf, ie_len);
/* peering protocol */
if (ampe)
wpabuf_put_le16(buf, 1);
else
wpabuf_put_le16(buf, 0);
wpabuf_put_le16(buf, sta->my_lid);
if (add_plid)
wpabuf_put_le16(buf, sta->peer_lid);
if (type == PLINK_CLOSE)
wpabuf_put_le16(buf, close_reason);
if (ampe) {
if (sta->sae == NULL) {
wpa_msg(wpa_s, MSG_INFO, "Mesh MPM: no SAE session");
goto fail;
}
mesh_rsn_get_pmkid(wpa_s->mesh_rsn, sta,
wpabuf_put(buf, PMKID_LEN));
}
#ifdef CONFIG_IEEE80211N
if (type != PLINK_CLOSE && wpa_s->mesh_ht_enabled) {
u8 ht_capa_oper[2 + 26 + 2 + 22];
pos = hostapd_eid_ht_capabilities(bss, ht_capa_oper);
pos = hostapd_eid_ht_operation(bss, pos);
wpabuf_put_data(buf, ht_capa_oper, pos - ht_capa_oper);
}
#endif /* CONFIG_IEEE80211N */
#ifdef CONFIG_IEEE80211AC
if (type != PLINK_CLOSE && wpa_s->mesh_vht_enabled) {
u8 vht_capa_oper[2 + 12 + 2 + 5];
pos = hostapd_eid_vht_capabilities(bss, vht_capa_oper, 0);
pos = hostapd_eid_vht_operation(bss, pos);
wpabuf_put_data(buf, vht_capa_oper, pos - vht_capa_oper);
}
#endif /* CONFIG_IEEE80211AC */
if (ampe && mesh_rsn_protect_frame(wpa_s->mesh_rsn, sta, cat, buf)) {
wpa_msg(wpa_s, MSG_INFO,
"Mesh MPM: failed to add AMPE and MIC IE");
goto fail;
}
wpa_msg(wpa_s, MSG_DEBUG, "Mesh MPM: Sending peering frame type %d to "
MACSTR " (my_lid=0x%x peer_lid=0x%x)",
type, MAC2STR(sta->addr), sta->my_lid, sta->peer_lid);
ret = wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0,
sta->addr, wpa_s->own_addr, wpa_s->own_addr,
wpabuf_head(buf), wpabuf_len(buf), 0);
if (ret < 0)
wpa_msg(wpa_s, MSG_INFO,
"Mesh MPM: failed to send peering frame");
fail:
wpabuf_free(buf);
}
/* configure peering state in ours and driver's station entry */
void wpa_mesh_set_plink_state(struct wpa_supplicant *wpa_s,
struct sta_info *sta,
enum mesh_plink_state state)
{
struct hostapd_sta_add_params params;
int ret;
wpa_msg(wpa_s, MSG_DEBUG, "MPM set " MACSTR " from %s into %s",
MAC2STR(sta->addr), mplstate[sta->plink_state],
mplstate[state]);
sta->plink_state = state;
os_memset(¶ms, 0, sizeof(params));
params.addr = sta->addr;
params.plink_state = state;
params.peer_aid = sta->peer_aid;
params.set = 1;
ret = wpa_drv_sta_add(wpa_s, ¶ms);
if (ret) {
wpa_msg(wpa_s, MSG_ERROR, "Driver failed to set " MACSTR
": %d", MAC2STR(sta->addr), ret);
}
}
static void mesh_mpm_fsm_restart(struct wpa_supplicant *wpa_s,
struct sta_info *sta)
{
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
eloop_cancel_timeout(plink_timer, wpa_s, sta);
ap_free_sta(hapd, sta);
}
static void plink_timer(void *eloop_ctx, void *user_data)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
struct sta_info *sta = user_data;
u16 reason = 0;
struct mesh_conf *conf = wpa_s->ifmsh->mconf;
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
switch (sta->plink_state) {
case PLINK_OPN_RCVD:
case PLINK_OPN_SNT:
/* retry timer */
if (sta->mpm_retries < conf->dot11MeshMaxRetries) {
eloop_register_timeout(
conf->dot11MeshRetryTimeout / 1000,
(conf->dot11MeshRetryTimeout % 1000) * 1000,
plink_timer, wpa_s, sta);
mesh_mpm_send_plink_action(wpa_s, sta, PLINK_OPEN, 0);
sta->mpm_retries++;
break;
}
reason = WLAN_REASON_MESH_MAX_RETRIES;
/* fall through on else */
case PLINK_CNF_RCVD:
/* confirm timer */
if (!reason)
reason = WLAN_REASON_MESH_CONFIRM_TIMEOUT;
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
eloop_register_timeout(conf->dot11MeshHoldingTimeout / 1000,
(conf->dot11MeshHoldingTimeout % 1000) * 1000,
plink_timer, wpa_s, sta);
mesh_mpm_send_plink_action(wpa_s, sta, PLINK_CLOSE, reason);
break;
case PLINK_HOLDING:
/* holding timer */
if (sta->mesh_sae_pmksa_caching) {
wpa_printf(MSG_DEBUG, "MPM: Peer " MACSTR
" looks like it does not support mesh SAE PMKSA caching, so remove the cached entry for it",
MAC2STR(sta->addr));
wpa_auth_pmksa_remove(hapd->wpa_auth, sta->addr);
}
mesh_mpm_fsm_restart(wpa_s, sta);
break;
default:
break;
}
}
/* initiate peering with station */
static void
mesh_mpm_plink_open(struct wpa_supplicant *wpa_s, struct sta_info *sta,
enum mesh_plink_state next_state)
{
struct mesh_conf *conf = wpa_s->ifmsh->mconf;
eloop_cancel_timeout(plink_timer, wpa_s, sta);
eloop_register_timeout(conf->dot11MeshRetryTimeout / 1000,
(conf->dot11MeshRetryTimeout % 1000) * 1000,
plink_timer, wpa_s, sta);
mesh_mpm_send_plink_action(wpa_s, sta, PLINK_OPEN, 0);
wpa_mesh_set_plink_state(wpa_s, sta, next_state);
}
static int mesh_mpm_plink_close(struct hostapd_data *hapd, struct sta_info *sta,
void *ctx)
{
struct wpa_supplicant *wpa_s = ctx;
int reason = WLAN_REASON_MESH_PEERING_CANCELLED;
if (sta) {
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
mesh_mpm_send_plink_action(wpa_s, sta, PLINK_CLOSE, reason);
wpa_printf(MSG_DEBUG, "MPM closing plink sta=" MACSTR,
MAC2STR(sta->addr));
eloop_cancel_timeout(plink_timer, wpa_s, sta);
return 0;
}
return 1;
}
int mesh_mpm_close_peer(struct wpa_supplicant *wpa_s, const u8 *addr)
{
struct hostapd_data *hapd;
struct sta_info *sta;
if (!wpa_s->ifmsh) {
wpa_msg(wpa_s, MSG_INFO, "Mesh is not prepared yet");
return -1;
}
hapd = wpa_s->ifmsh->bss[0];
sta = ap_get_sta(hapd, addr);
if (!sta) {
wpa_msg(wpa_s, MSG_INFO, "No such mesh peer");
return -1;
}
return mesh_mpm_plink_close(hapd, sta, wpa_s) == 0 ? 0 : -1;
}
static void peer_add_timer(void *eloop_ctx, void *user_data)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
os_memset(hapd->mesh_required_peer, 0, ETH_ALEN);
}
int mesh_mpm_connect_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
int duration)
{
struct wpa_ssid *ssid = wpa_s->current_ssid;
struct hostapd_data *hapd;
struct sta_info *sta;
struct mesh_conf *conf;
if (!wpa_s->ifmsh) {
wpa_msg(wpa_s, MSG_INFO, "Mesh is not prepared yet");
return -1;
}
if (!ssid || !ssid->no_auto_peer) {
wpa_msg(wpa_s, MSG_INFO,
"This command is available only with no_auto_peer mesh network");
return -1;
}
hapd = wpa_s->ifmsh->bss[0];
conf = wpa_s->ifmsh->mconf;
sta = ap_get_sta(hapd, addr);
if (!sta) {
wpa_msg(wpa_s, MSG_INFO, "No such mesh peer");
return -1;
}
if ((PLINK_OPN_SNT <= sta->plink_state &&
sta->plink_state <= PLINK_ESTAB) ||
(sta->sae && sta->sae->state > SAE_NOTHING)) {
wpa_msg(wpa_s, MSG_INFO,
"Specified peer is connecting/connected");
return -1;
}
if (conf->security == MESH_CONF_SEC_NONE) {
mesh_mpm_plink_open(wpa_s, sta, PLINK_OPN_SNT);
} else {
mesh_rsn_auth_sae_sta(wpa_s, sta);
os_memcpy(hapd->mesh_required_peer, addr, ETH_ALEN);
eloop_register_timeout(duration == -1 ? 10 : duration, 0,
peer_add_timer, wpa_s, NULL);
}
return 0;
}
void mesh_mpm_deinit(struct wpa_supplicant *wpa_s, struct hostapd_iface *ifmsh)
{
struct hostapd_data *hapd = ifmsh->bss[0];
/* notify peers we're leaving */
ap_for_each_sta(hapd, mesh_mpm_plink_close, wpa_s);
hapd->num_plinks = 0;
hostapd_free_stas(hapd);
eloop_cancel_timeout(peer_add_timer, wpa_s, NULL);
}
/* for mesh_rsn to indicate this peer has completed authentication, and we're
* ready to start AMPE */
void mesh_mpm_auth_peer(struct wpa_supplicant *wpa_s, const u8 *addr)
{
struct hostapd_data *data = wpa_s->ifmsh->bss[0];
struct hostapd_sta_add_params params;
struct sta_info *sta;
int ret;
sta = ap_get_sta(data, addr);
if (!sta) {
wpa_msg(wpa_s, MSG_DEBUG, "no such mesh peer");
return;
}
/* TODO: Should do nothing if this STA is already authenticated, but
* the AP code already sets this flag. */
sta->flags |= WLAN_STA_AUTH;
mesh_rsn_init_ampe_sta(wpa_s, sta);
os_memset(¶ms, 0, sizeof(params));
params.addr = sta->addr;
params.flags = WPA_STA_AUTHENTICATED | WPA_STA_AUTHORIZED;
params.set = 1;
wpa_msg(wpa_s, MSG_DEBUG, "MPM authenticating " MACSTR,
MAC2STR(sta->addr));
ret = wpa_drv_sta_add(wpa_s, ¶ms);
if (ret) {
wpa_msg(wpa_s, MSG_ERROR,
"Driver failed to set " MACSTR ": %d",
MAC2STR(sta->addr), ret);
}
if (!sta->my_lid)
mesh_mpm_init_link(wpa_s, sta);
mesh_mpm_plink_open(wpa_s, sta, PLINK_OPN_SNT);
}
/*
* Initialize a sta_info structure for a peer and upload it into the driver
* in preparation for beginning authentication or peering. This is done when a
* Beacon (secure or open mesh) or a peering open frame (for open mesh) is
* received from the peer for the first time.
*/
static struct sta_info * mesh_mpm_add_peer(struct wpa_supplicant *wpa_s,
const u8 *addr,
struct ieee802_11_elems *elems)
{
struct hostapd_sta_add_params params;
struct mesh_conf *conf = wpa_s->ifmsh->mconf;
struct hostapd_data *data = wpa_s->ifmsh->bss[0];
struct sta_info *sta;
#ifdef CONFIG_IEEE80211N
struct ieee80211_ht_operation *oper;
#endif /* CONFIG_IEEE80211N */
int ret;
if (elems->mesh_config_len >= 7 &&
!(elems->mesh_config[6] & MESH_CAP_ACCEPT_ADDITIONAL_PEER)) {
wpa_msg(wpa_s, MSG_DEBUG,
"mesh: Ignore a crowded peer " MACSTR,
MAC2STR(addr));
return NULL;
}
sta = ap_get_sta(data, addr);
if (!sta) {
sta = ap_sta_add(data, addr);
if (!sta)
return NULL;
}
/* Set WMM by default since Mesh STAs are QoS STAs */
sta->flags |= WLAN_STA_WMM;
/* initialize sta */
if (copy_supp_rates(wpa_s, sta, elems)) {
ap_free_sta(data, sta);
return NULL;
}
if (!sta->my_lid)
mesh_mpm_init_link(wpa_s, sta);
#ifdef CONFIG_IEEE80211N
copy_sta_ht_capab(data, sta, elems->ht_capabilities);
oper = (struct ieee80211_ht_operation *) elems->ht_operation;
if (oper &&
!(oper->ht_param & HT_INFO_HT_PARAM_STA_CHNL_WIDTH) &&
sta->ht_capabilities) {
wpa_msg(wpa_s, MSG_DEBUG, MACSTR
" does not support 40 MHz bandwidth",
MAC2STR(sta->addr));
set_disable_ht40(sta->ht_capabilities, 1);
}
update_ht_state(data, sta);
#endif /* CONFIG_IEEE80211N */
#ifdef CONFIG_IEEE80211AC
copy_sta_vht_capab(data, sta, elems->vht_capabilities);
set_sta_vht_opmode(data, sta, elems->vht_opmode_notif);
#endif /* CONFIG_IEEE80211AC */
if (hostapd_get_aid(data, sta) < 0) {
wpa_msg(wpa_s, MSG_ERROR, "No AIDs available");
ap_free_sta(data, sta);
return NULL;
}
/* insert into driver */
os_memset(¶ms, 0, sizeof(params));
params.supp_rates = sta->supported_rates;
params.supp_rates_len = sta->supported_rates_len;
params.addr = addr;
params.plink_state = sta->plink_state;
params.aid = sta->aid;
params.peer_aid = sta->peer_aid;
params.listen_interval = 100;
params.ht_capabilities = sta->ht_capabilities;
params.vht_capabilities = sta->vht_capabilities;
params.flags |= WPA_STA_WMM;
params.flags_mask |= WPA_STA_AUTHENTICATED;
if (conf->security == MESH_CONF_SEC_NONE) {
params.flags |= WPA_STA_AUTHORIZED;
params.flags |= WPA_STA_AUTHENTICATED;
} else {
sta->flags |= WLAN_STA_MFP;
params.flags |= WPA_STA_MFP;
}
ret = wpa_drv_sta_add(wpa_s, ¶ms);
if (ret) {
wpa_msg(wpa_s, MSG_ERROR,
"Driver failed to insert " MACSTR ": %d",
MAC2STR(addr), ret);
ap_free_sta(data, sta);
return NULL;
}
return sta;
}
void wpa_mesh_new_mesh_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
struct ieee802_11_elems *elems)
{
struct mesh_conf *conf = wpa_s->ifmsh->mconf;
struct hostapd_data *data = wpa_s->ifmsh->bss[0];
struct sta_info *sta;
struct wpa_ssid *ssid = wpa_s->current_ssid;
sta = mesh_mpm_add_peer(wpa_s, addr, elems);
if (!sta)
return;
if (ssid && ssid->no_auto_peer &&
(is_zero_ether_addr(data->mesh_required_peer) ||
os_memcmp(data->mesh_required_peer, addr, ETH_ALEN) != 0)) {
wpa_msg(wpa_s, MSG_INFO, "will not initiate new peer link with "
MACSTR " because of no_auto_peer", MAC2STR(addr));
if (data->mesh_pending_auth) {
struct os_reltime age;
const struct ieee80211_mgmt *mgmt;
struct hostapd_frame_info fi;
mgmt = wpabuf_head(data->mesh_pending_auth);
os_reltime_age(&data->mesh_pending_auth_time, &age);
if (age.sec < 2 &&
os_memcmp(mgmt->sa, addr, ETH_ALEN) == 0) {
wpa_printf(MSG_DEBUG,
"mesh: Process pending Authentication frame from %u.%06u seconds ago",
(unsigned int) age.sec,
(unsigned int) age.usec);
os_memset(&fi, 0, sizeof(fi));
ieee802_11_mgmt(
data,
wpabuf_head(data->mesh_pending_auth),
wpabuf_len(data->mesh_pending_auth),
&fi);
}
wpabuf_free(data->mesh_pending_auth);
data->mesh_pending_auth = NULL;
}
return;
}
if (conf->security == MESH_CONF_SEC_NONE) {
if (sta->plink_state < PLINK_OPN_SNT ||
sta->plink_state > PLINK_ESTAB)
mesh_mpm_plink_open(wpa_s, sta, PLINK_OPN_SNT);
} else {
mesh_rsn_auth_sae_sta(wpa_s, sta);
}
}
void mesh_mpm_mgmt_rx(struct wpa_supplicant *wpa_s, struct rx_mgmt *rx_mgmt)
{
struct hostapd_frame_info fi;
os_memset(&fi, 0, sizeof(fi));
fi.datarate = rx_mgmt->datarate;
fi.ssi_signal = rx_mgmt->ssi_signal;
ieee802_11_mgmt(wpa_s->ifmsh->bss[0], rx_mgmt->frame,
rx_mgmt->frame_len, &fi);
}
static void mesh_mpm_plink_estab(struct wpa_supplicant *wpa_s,
struct sta_info *sta)
{
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
struct mesh_conf *conf = wpa_s->ifmsh->mconf;
u8 seq[6] = {};
wpa_msg(wpa_s, MSG_INFO, "mesh plink with " MACSTR " established",
MAC2STR(sta->addr));
if (conf->security & MESH_CONF_SEC_AMPE) {
wpa_hexdump_key(MSG_DEBUG, "mesh: MTK", sta->mtk, sta->mtk_len);
wpa_drv_set_key(wpa_s, wpa_cipher_to_alg(conf->pairwise_cipher),
sta->addr, 0, 0, seq, sizeof(seq),
sta->mtk, sta->mtk_len);
wpa_hexdump_key(MSG_DEBUG, "mesh: RX MGTK Key RSC",
sta->mgtk_rsc, sizeof(sta->mgtk_rsc));
wpa_hexdump_key(MSG_DEBUG, "mesh: RX MGTK",
sta->mgtk, sta->mgtk_len);
wpa_drv_set_key(wpa_s, wpa_cipher_to_alg(conf->group_cipher),
sta->addr, sta->mgtk_key_id, 0,
sta->mgtk_rsc, sizeof(sta->mgtk_rsc),
sta->mgtk, sta->mgtk_len);
if (sta->igtk_len) {
wpa_hexdump_key(MSG_DEBUG, "mesh: RX IGTK Key RSC",
sta->igtk_rsc, sizeof(sta->igtk_rsc));
wpa_hexdump_key(MSG_DEBUG, "mesh: RX IGTK",
sta->igtk, sta->igtk_len);
wpa_drv_set_key(
wpa_s,
wpa_cipher_to_alg(conf->mgmt_group_cipher),
sta->addr, sta->igtk_key_id, 0,
sta->igtk_rsc, sizeof(sta->igtk_rsc),
sta->igtk, sta->igtk_len);
}
}
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_ESTAB);
hapd->num_plinks++;
sta->flags |= WLAN_STA_ASSOC;
sta->mesh_sae_pmksa_caching = 0;
eloop_cancel_timeout(peer_add_timer, wpa_s, NULL);
peer_add_timer(wpa_s, NULL);
eloop_cancel_timeout(plink_timer, wpa_s, sta);
/* Send ctrl event */
wpa_msg(wpa_s, MSG_INFO, MESH_PEER_CONNECTED MACSTR,
MAC2STR(sta->addr));
}
static void mesh_mpm_fsm(struct wpa_supplicant *wpa_s, struct sta_info *sta,
enum plink_event event, u16 reason)
{
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
struct mesh_conf *conf = wpa_s->ifmsh->mconf;
wpa_msg(wpa_s, MSG_DEBUG, "MPM " MACSTR " state %s event %s",
MAC2STR(sta->addr), mplstate[sta->plink_state],
mplevent[event]);
switch (sta->plink_state) {
case PLINK_IDLE:
switch (event) {
case CLS_ACPT:
mesh_mpm_fsm_restart(wpa_s, sta);
break;
case OPN_ACPT:
mesh_mpm_plink_open(wpa_s, sta, PLINK_OPN_RCVD);
mesh_mpm_send_plink_action(wpa_s, sta, PLINK_CONFIRM,
0);
break;
case REQ_RJCT:
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CLOSE, reason);
break;
default:
break;
}
break;
case PLINK_OPN_SNT:
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
if (!reason)
reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION;
/* fall-through */
case CLS_ACPT:
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
if (!reason)
reason = WLAN_REASON_MESH_CLOSE_RCVD;
eloop_register_timeout(
conf->dot11MeshHoldingTimeout / 1000,
(conf->dot11MeshHoldingTimeout % 1000) * 1000,
plink_timer, wpa_s, sta);
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CLOSE, reason);
break;
case OPN_ACPT:
/* retry timer is left untouched */
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_OPN_RCVD);
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CONFIRM, 0);
break;
case CNF_ACPT:
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_CNF_RCVD);
eloop_cancel_timeout(plink_timer, wpa_s, sta);
eloop_register_timeout(
conf->dot11MeshConfirmTimeout / 1000,
(conf->dot11MeshConfirmTimeout % 1000) * 1000,
plink_timer, wpa_s, sta);
break;
default:
break;
}
break;
case PLINK_OPN_RCVD:
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
if (!reason)
reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION;
/* fall-through */
case CLS_ACPT:
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
if (!reason)
reason = WLAN_REASON_MESH_CLOSE_RCVD;
eloop_register_timeout(
conf->dot11MeshHoldingTimeout / 1000,
(conf->dot11MeshHoldingTimeout % 1000) * 1000,
plink_timer, wpa_s, sta);
sta->mpm_close_reason = reason;
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CLOSE, reason);
break;
case OPN_ACPT:
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CONFIRM, 0);
break;
case CNF_ACPT:
if (conf->security & MESH_CONF_SEC_AMPE)
mesh_rsn_derive_mtk(wpa_s, sta);
mesh_mpm_plink_estab(wpa_s, sta);
break;
default:
break;
}
break;
case PLINK_CNF_RCVD:
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
if (!reason)
reason = WLAN_REASON_MESH_CONFIG_POLICY_VIOLATION;
/* fall-through */
case CLS_ACPT:
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
if (!reason)
reason = WLAN_REASON_MESH_CLOSE_RCVD;
eloop_register_timeout(
conf->dot11MeshHoldingTimeout / 1000,
(conf->dot11MeshHoldingTimeout % 1000) * 1000,
plink_timer, wpa_s, sta);
sta->mpm_close_reason = reason;
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CLOSE, reason);
break;
case OPN_ACPT:
if (conf->security & MESH_CONF_SEC_AMPE)
mesh_rsn_derive_mtk(wpa_s, sta);
mesh_mpm_plink_estab(wpa_s, sta);
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CONFIRM, 0);
break;
default:
break;
}
break;
case PLINK_ESTAB:
switch (event) {
case OPN_RJCT:
case CNF_RJCT:
case CLS_ACPT:
wpa_mesh_set_plink_state(wpa_s, sta, PLINK_HOLDING);
if (!reason)
reason = WLAN_REASON_MESH_CLOSE_RCVD;
eloop_register_timeout(
conf->dot11MeshHoldingTimeout / 1000,
(conf->dot11MeshHoldingTimeout % 1000) * 1000,
plink_timer, wpa_s, sta);
sta->mpm_close_reason = reason;
wpa_msg(wpa_s, MSG_INFO, "mesh plink with " MACSTR
" closed with reason %d",
MAC2STR(sta->addr), reason);
wpa_msg(wpa_s, MSG_INFO, MESH_PEER_DISCONNECTED MACSTR,
MAC2STR(sta->addr));
hapd->num_plinks--;
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CLOSE, reason);
break;
case OPN_ACPT:
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CONFIRM, 0);
break;
default:
break;
}
break;
case PLINK_HOLDING:
switch (event) {
case CLS_ACPT:
mesh_mpm_fsm_restart(wpa_s, sta);
break;
case OPN_ACPT:
case CNF_ACPT:
case OPN_RJCT:
case CNF_RJCT:
reason = sta->mpm_close_reason;
mesh_mpm_send_plink_action(wpa_s, sta,
PLINK_CLOSE, reason);
break;
default:
break;
}
break;
default:
wpa_msg(wpa_s, MSG_DEBUG,
"Unsupported MPM event %s for state %s",
mplevent[event], mplstate[sta->plink_state]);
break;
}
}
void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s,
const struct ieee80211_mgmt *mgmt, size_t len)
{
u8 action_field;
struct hostapd_data *hapd = wpa_s->ifmsh->bss[0];
struct mesh_conf *mconf = wpa_s->ifmsh->mconf;
struct sta_info *sta;
u16 plid = 0, llid = 0, aid = 0;
enum plink_event event;
struct ieee802_11_elems elems;
struct mesh_peer_mgmt_ie peer_mgmt_ie;
const u8 *ies;
size_t ie_len;
int ret;
u16 reason = 0;
if (mgmt->u.action.category != WLAN_ACTION_SELF_PROTECTED)
return;
action_field = mgmt->u.action.u.slf_prot_action.action;
if (action_field != PLINK_OPEN &&
action_field != PLINK_CONFIRM &&
action_field != PLINK_CLOSE)
return;
ies = mgmt->u.action.u.slf_prot_action.variable;
ie_len = (const u8 *) mgmt + len -
mgmt->u.action.u.slf_prot_action.variable;
/* at least expect mesh id and peering mgmt */
if (ie_len < 2 + 2) {
wpa_printf(MSG_DEBUG,
"MPM: Ignore too short action frame %u ie_len %u",
action_field, (unsigned int) ie_len);
return;
}
wpa_printf(MSG_DEBUG, "MPM: Received PLINK action %u", action_field);
if (action_field == PLINK_OPEN || action_field == PLINK_CONFIRM) {
wpa_printf(MSG_DEBUG, "MPM: Capability 0x%x",
WPA_GET_LE16(ies));
ies += 2; /* capability */
ie_len -= 2;
}
if (action_field == PLINK_CONFIRM) {
aid = WPA_GET_LE16(ies);
wpa_printf(MSG_DEBUG, "MPM: AID 0x%x", aid);
ies += 2; /* aid */
ie_len -= 2;
}
/* check for mesh peering, mesh id and mesh config IEs */
if (ieee802_11_parse_elems(ies, ie_len, &elems, 0) == ParseFailed) {
wpa_printf(MSG_DEBUG, "MPM: Failed to parse PLINK IEs");
return;
}
if (!elems.peer_mgmt) {
wpa_printf(MSG_DEBUG,
"MPM: No Mesh Peering Management element");
return;
}
if (action_field != PLINK_CLOSE) {
if (!elems.mesh_id || !elems.mesh_config) {
wpa_printf(MSG_DEBUG,
"MPM: No Mesh ID or Mesh Configuration element");
return;
}
if (!matches_local(wpa_s, &elems)) {
wpa_printf(MSG_DEBUG,
"MPM: Mesh ID or Mesh Configuration element do not match local MBSS");
return;
}
}
ret = mesh_mpm_parse_peer_mgmt(wpa_s, action_field,
elems.peer_mgmt,
elems.peer_mgmt_len,
&peer_mgmt_ie);
if (ret) {
wpa_printf(MSG_DEBUG, "MPM: Mesh parsing rejected frame");
return;
}
/* the sender's llid is our plid and vice-versa */
plid = WPA_GET_LE16(peer_mgmt_ie.llid);
if (peer_mgmt_ie.plid)
llid = WPA_GET_LE16(peer_mgmt_ie.plid);
wpa_printf(MSG_DEBUG, "MPM: plid=0x%x llid=0x%x", plid, llid);
if (action_field == PLINK_CLOSE)
wpa_printf(MSG_DEBUG, "MPM: close reason=%u",
WPA_GET_LE16(peer_mgmt_ie.reason));
sta = ap_get_sta(hapd, mgmt->sa);
/*
* If this is an open frame from an unknown STA, and this is an
* open mesh, then go ahead and add the peer before proceeding.
*/
if (!sta && action_field == PLINK_OPEN &&
(!(mconf->security & MESH_CONF_SEC_AMPE) ||
wpa_auth_pmksa_get(hapd->wpa_auth, mgmt->sa, NULL)))
sta = mesh_mpm_add_peer(wpa_s, mgmt->sa, &elems);
if (!sta) {
wpa_printf(MSG_DEBUG, "MPM: No STA entry for peer");
return;
}
#ifdef CONFIG_SAE
/* peer is in sae_accepted? */
if (sta->sae && sta->sae->state != SAE_ACCEPTED) {
wpa_printf(MSG_DEBUG, "MPM: SAE not yet accepted for peer");
return;
}
#endif /* CONFIG_SAE */
if (!sta->my_lid)
mesh_mpm_init_link(wpa_s, sta);
if (mconf->security & MESH_CONF_SEC_AMPE) {
int res;
res = mesh_rsn_process_ampe(wpa_s, sta, &elems,
&mgmt->u.action.category,
peer_mgmt_ie.chosen_pmk,
ies, ie_len);
if (res) {
wpa_printf(MSG_DEBUG,
"MPM: RSN process rejected frame (res=%d)",
res);
if (action_field == PLINK_OPEN && res == -2) {
/* AES-SIV decryption failed */
mesh_mpm_fsm(wpa_s, sta, OPN_RJCT,
WLAN_REASON_MESH_INVALID_GTK);
}
return;
}
}
if (sta->plink_state == PLINK_BLOCKED) {
wpa_printf(MSG_DEBUG, "MPM: PLINK_BLOCKED");
return;
}
/* Now we will figure out the appropriate event... */
switch (action_field) {
case PLINK_OPEN:
if (plink_free_count(hapd) == 0) {
event = REQ_RJCT;
reason = WLAN_REASON_MESH_MAX_PEERS;
wpa_printf(MSG_INFO,
"MPM: Peer link num over quota(%d)",
hapd->max_plinks);
} else if (sta->peer_lid && sta->peer_lid != plid) {
wpa_printf(MSG_DEBUG,
"MPM: peer_lid mismatch: 0x%x != 0x%x",
sta->peer_lid, plid);
return; /* no FSM event */
} else {
sta->peer_lid = plid;
event = OPN_ACPT;
}
break;
case PLINK_CONFIRM:
if (plink_free_count(hapd) == 0) {
event = REQ_RJCT;
reason = WLAN_REASON_MESH_MAX_PEERS;
wpa_printf(MSG_INFO,
"MPM: Peer link num over quota(%d)",
hapd->max_plinks);
} else if (sta->my_lid != llid ||
(sta->peer_lid && sta->peer_lid != plid)) {
wpa_printf(MSG_DEBUG,
"MPM: lid mismatch: my_lid: 0x%x != 0x%x or peer_lid: 0x%x != 0x%x",
sta->my_lid, llid, sta->peer_lid, plid);
return; /* no FSM event */
} else {
if (!sta->peer_lid)
sta->peer_lid = plid;
sta->peer_aid = aid;
event = CNF_ACPT;
}
break;
case PLINK_CLOSE:
if (sta->plink_state == PLINK_ESTAB)
/* Do not check for llid or plid. This does not
* follow the standard but since multiple plinks
* per cand are not supported, it is necessary in
* order to avoid a livelock when MP A sees an
* establish peer link to MP B but MP B does not
* see it. This can be caused by a timeout in
* B's peer link establishment or B being
* restarted.
*/
event = CLS_ACPT;
else if (sta->peer_lid != plid) {
wpa_printf(MSG_DEBUG,
"MPM: peer_lid mismatch: 0x%x != 0x%x",
sta->peer_lid, plid);
return; /* no FSM event */
} else if (peer_mgmt_ie.plid && sta->my_lid != llid) {
wpa_printf(MSG_DEBUG,
"MPM: my_lid mismatch: 0x%x != 0x%x",
sta->my_lid, llid);
return; /* no FSM event */
} else {
event = CLS_ACPT;
}
break;
default:
/*
* This cannot be hit due to the action_field check above, but
* compilers may not be able to figure that out and can warn
* about uninitialized event below.
*/
return;
}
mesh_mpm_fsm(wpa_s, sta, event, reason);
}
/* called by ap_free_sta */
void mesh_mpm_free_sta(struct hostapd_data *hapd, struct sta_info *sta)
{
if (sta->plink_state == PLINK_ESTAB)
hapd->num_plinks--;
eloop_cancel_timeout(plink_timer, ELOOP_ALL_CTX, sta);
eloop_cancel_timeout(mesh_auth_timer, ELOOP_ALL_CTX, sta);
}