## @file
# FDF file of Clanton Peak CRB platform with 32-bit DXE
#
# This package provides QuarkNcSocId platform specific modules.
# Copyright (c) 2013 - 2015 Intel Corporation.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
################################################################################
#
# Defines Section - statements that will be processed to create a Makefile.
#
################################################################################
[Defines]
# Address 0x100000000 (4 GB reset address)
# Base Size
# +---------------------------+
# FLASH_BASE | FD.Quark: | 0x800000 (8 MB)
# 0xFF800000 | BaseAddress |
# +---------------------------+
#
# Flash offsets are 0 based, but are relative to FD.Quark BaseAddress, e.g. Payload Base is at 0x400000, Flash Base is at 0xFF800000 for 8 MB SPI part.
# 0xFF800000 + 0x400000 = 0xFFC00000.
#
# Address 0x0 (0xFF800000 for 8 MB SPI part)
# +---------------------------+
# FLASH_FV_PAYLOAD_BASE | Payload Image | FLASH_FV_PAYLOAD_SIZE
# 0x00400000 | | 0x00100000
# +---------------------------+
# FLASH_FV_MAIN_BASE | FvMain Image (Compressed) | FLASH_FV_MAIN_SIZE
# 0x00500000 | | 0x001E0000
# +---------------------------+
# NVRAM_AREA_BASE | NVRAM Area= | NVRAM_AREA_SIZE
# 0x006E0000 | Variable + FTW Working + |
# | FTW Spare |
# +---+-------------------+---+
# NVRAM_AREA_VARIABLE_BASE | | NVRAM_AREA_VARIABLE_SIZE
# | |
# +-------------------+
# FTW_WORKING_BASE | | FTW_WORKING_SIZE
# | |
# +-------------------+
# FTW_SPARE_BASE | | FTW_SPARE_SIZE
# | |
# +---+-------------------+---+
# RMU_BINARY_BASE | RMU Binary | RMU_BINARY_SIZE
# 0x00700000 | | 0x00008000
# +---------------------------+
# PLATFORM_DATA_BASE | PlatformData Binary | PLATFORM_DATA_SIZE
# 0x00710000 | | 0x00001000
# +---------------------------+
# FVRECOVERY_IMAGE_BASE | FVRECOVERY Image | FVRECOVERY_IMAGE_SIZE
# 0x720000 | | 0x000E0000
# +---------------------------+
#
# Define value used to compute FLASH regions below reset vector location just below 4GB
#
DEFINE RESET_ADDRESS = 0x100000000 # 4 GB
#
# Set size of FLASH to 8MB
#
DEFINE FLASH_SIZE = 0x800000
DEFINE FLASH_BASE = $(RESET_ADDRESS) - $(FLASH_SIZE) # The base address of the Flash Device
#
# Set FLASH block size to 4KB
#
DEFINE FLASH_BLOCKSIZE = 0x1000 # 4 KB
#
# Misc settings
#
DEFINE FLASH_BLOCKSIZE_DATA = 0x00, 0x10, 0x00, 0x00 # equivalent for DATA blocks
#
# Start PAYLOAD at 4MB into 8MB FLASH
#
DEFINE FLASH_FV_PAYLOAD_BASE = 0x00400000
DEFINE FLASH_FV_PAYLOAD_SIZE = 0x00100000
#
# Put FVMAIN between PAYLOAD and RMU Binary
#
DEFINE FLASH_FV_MAIN_BASE = 0x00500000
DEFINE FLASH_FV_MAIN_SIZE = 0x001E0000
#
# Place NV Storage just above Platform Data Base
#
DEFINE NVRAM_AREA_VARIABLE_BASE = 0x006E0000
DEFINE NVRAM_AREA_SIZE = 0x00020000
DEFINE NVRAM_AREA_VARIABLE_SIZE = 0x0000E000
DEFINE FTW_WORKING_BASE = $(NVRAM_AREA_VARIABLE_BASE) + $(NVRAM_AREA_VARIABLE_SIZE)
DEFINE FTW_WORKING_SIZE = 0x00002000
DEFINE FTW_SPARE_BASE = $(FTW_WORKING_BASE) + $(FTW_WORKING_SIZE)
DEFINE FTW_SPARE_SIZE = $(NVRAM_AREA_SIZE) - $(NVRAM_AREA_VARIABLE_SIZE) - $(FTW_WORKING_SIZE)
#
# RMU Binary must be at fixed address 1MB below 4GB (0xFFF00000)
#
DEFINE RMU_BINARY_BASE = 0x00700000 # HW fixed address
DEFINE RMU_BINARY_SIZE = 0x00008000 # HW fixed address, so fixed size
#
# Platform Data Base must be 64KB above RMU
#
DEFINE VPD_BASE = 0x00708000
DEFINE VPD_SIZE = 0x00001000
#
# Place FV Recovery above NV Storage
#
DEFINE FVRECOVERY_IMAGE_SIZE = 0x000F0000
DEFINE FVRECOVERY_IMAGE_BASE = $(FLASH_SIZE) - $(FVRECOVERY_IMAGE_SIZE)
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.Quark]
BaseAddress = 0xFF800000 #The base address of the Flash Device; set to same value as FLASH_BASE.
Size = 0x800000 #The size in bytes of the Flash Device; set to same value as FLASH_SIZE.
ErasePolarity = 1
BlockSize = $(FLASH_BLOCKSIZE)
NumBlocks = 0x800 #The number of blocks for the Flash Device.
SET gQuarkPlatformTokenSpaceGuid.PcdFlashAreaBaseAddress = $(FLASH_BASE)
SET gQuarkPlatformTokenSpaceGuid.PcdFlashAreaSize = $(FLASH_SIZE)
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
########################################################
# Quark Payload Image
########################################################
$(FLASH_FV_PAYLOAD_BASE)|$(FLASH_FV_PAYLOAD_SIZE)
gQuarkPlatformTokenSpaceGuid.PcdFlashFvPayloadBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvPayloadSize
FV = PAYLOAD
########################################################
# Quark FVMAIN Image (Compressed)
########################################################
$(FLASH_FV_MAIN_BASE)|$(FLASH_FV_MAIN_SIZE)
gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainSize
FV = FVMAIN_COMPACT
#############################################################################
# Quark NVRAM Area
# Quark NVRAM Area contains: Variable + FTW Working + FTW Spare
#############################################################################
$(NVRAM_AREA_VARIABLE_BASE)|$(NVRAM_AREA_VARIABLE_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
#NV_VARIABLE_STORE
DATA = {
## This is the EFI_FIRMWARE_VOLUME_HEADER
# ZeroVector []
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
# FileSystemGuid: gEfiSystemNvDataFvGuid =
# { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,
0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
# FvLength: 0x20000
0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
#Signature "_FVH" #Attributes
0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,
#HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision
0x48, 0x00, 0x19, 0xF9, 0x00, 0x00, 0x00, 0x02,
#Blockmap[0]: 32 Blocks * 0x1000 Bytes / Block
0x20, 0x00, 0x00, 0x00, $(FLASH_BLOCKSIZE_DATA),
#Blockmap[1]: End
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
## This is the VARIABLE_STORE_HEADER
!if $(SECURE_BOOT_ENABLE)
# Signature: gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,
0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,
!else
# Signature: gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,
0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,
!endif
#Size: 0x0E000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0x0DFB8
# This can speed up the Variable Dispatch a bit.
0xB8, 0xDF, 0x00, 0x00,
#FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
$(FTW_WORKING_BASE)|$(FTW_WORKING_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
#NV_FTW_WORKING
DATA = {
# EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =
# { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,
0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,
# Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved
0xE2, 0x33, 0xF2, 0x03, 0xFE, 0xFF, 0xFF, 0xFF,
# WriteQueueSize: UINT64 #Size: 0x2000 - 0x20 (FTW_WORKING_HEADER) = 0x1FE0
0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
$(FTW_SPARE_BASE)|$(FTW_SPARE_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
#NV_FTW_SPARE
#########################################################
# Quark Remote Management Unit Binary
#########################################################
$(RMU_BINARY_BASE)|$(RMU_BINARY_SIZE)
INF QuarkSocBinPkg/QuarkNorthCluster/Binary/QuarkMicrocode/QuarkMicrocode.inf
#########################################################
# PlatformData Binary, default for standalone is none built-in so user selects.
#########################################################
$(VPD_BASE)|$(VPD_SIZE)
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress
FILE = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.bin
#######################
# Quark FVRECOVERY Image
#######################
$(FVRECOVERY_IMAGE_BASE)|$(FVRECOVERY_IMAGE_SIZE)
gQuarkPlatformTokenSpaceGuid.PcdFlashFvRecoveryBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvRecoverySize
FV = FVRECOVERY
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVRECOVERY]
BlockSize = $(FLASH_BLOCKSIZE)
FvAlignment = 16 #FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FvNameGuid = 18D6D9F4-2EEF-4913-AEE6-BE61C6DA6CC8
################################################################################
#
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image.
# Parsing tools will scan the INF file to determine the type of component or module.
# The component or module type is used to reference the standard rules
# defined elsewhere in the FDF file.
#
# The format for INF statements is:
# INF $(PathAndInfFileName)
#
################################################################################
##
# PEI Apriori file example, more PEIM module added later.
##
APRIORI PEI {
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
# PlatformConfigPei should be immediately after Pcd driver.
INF QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf
INF MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
INF MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
}
##
# SEC Phase modules
##
INF UefiCpuPkg/SecCore/SecCore.inf
INF MdeModulePkg/Core/Pei/PeiMain.inf
##
# PEI Phase RAW Data files.
##
FILE FREEFORM = PCD(gEfiQuarkNcSocIdTokenSpaceGuid.PcdQuarkMicrocodeFile) {
SECTION RAW = QuarkSocBinPkg/QuarkNorthCluster/Binary/QuarkMicrocode/RMU.bin
}
INF RuleOverride = NORELOC MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf
INF RuleOverride = NORELOC MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
INF RuleOverride = NORELOC MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
INF RuleOverride = NORELOC MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
INF RuleOverride = NORELOC MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF RuleOverride = NORELOC UefiCpuPkg/CpuMpPei/CpuMpPei.inf
INF RuleOverride = NORELOC MdeModulePkg/Universal/CapsulePei/CapsulePei.inf
INF RuleOverride = NORELOC QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei/MemoryInitPei.inf
INF RuleOverride = NORELOC QuarkSocPkg/QuarkNorthCluster/Smm/Pei/SmmAccessPei/SmmAccessPei.inf
INF RuleOverride = NORELOC QuarkSocPkg/QuarkNorthCluster/Smm/Pei/SmmControlPei/SmmControlPei.inf
INF QuarkPlatformPkg/Platform/Pei/PlatformInit/PlatformEarlyInit.inf
INF MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
INF UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationPei.inf
INF UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf
FILE FV_IMAGE = 1E9D7604-EF45-46a0-BD8A-71AC78C17AC1 {
SECTION PEI_DEPEX_EXP = {gEfiPeiMemoryDiscoveredPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid}
SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 { # TIANO COMPRESS GUID
SECTION FV_IMAGE = FVRECOVERY_COMPONENTS
}
}
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVRECOVERY_COMPONENTS]
BlockSize = $(FLASH_BLOCKSIZE)
FvAlignment = 16 #FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF QuarkSocPkg/QuarkSouthCluster/Usb/Common/Pei/UsbPei.inf
INF MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
INF QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Pei/OhciPei.inf
INF MdeModulePkg/Bus/Usb/UsbBusPei/UsbBusPei.inf
INF MdeModulePkg/Bus/Usb/UsbBotPei/UsbBotPei.inf
INF FatPkg/FatPei/FatPei.inf
INF MdeModulePkg/Universal/Disk/CdExpressPei/CdExpressPei.inf
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVMAIN]
BlockSize = $(FLASH_BLOCKSIZE)
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FvNameGuid = 30D9ED01-38D2-418a-90D5-C561750BF80F
##
# DXE Phase modules
##
INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
!if $(SOURCE_DEBUG_ENABLE)
INF SourceLevelDebugPkg/DebugAgentDxe/DebugAgentDxe.inf
!endif
#
# Early SoC / Platform modules
#
INF QuarkPlatformPkg/Platform/Dxe/PlatformInit/PlatformInitDxe.inf
##
# EDK Core modules
##
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Smm/ReportStatusCodeRouterSmm.inf
INF MdeModulePkg/Universal/StatusCodeHandler/Smm/StatusCodeHandlerSmm.inf
INF MdeModulePkg/Universal/SectionExtractionDxe/SectionExtractionDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF MdeModulePkg/Universal/Metronome/Metronome.inf
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteSmm.inf
!if $(SECURE_BOOT_ENABLE)
INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!endif
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmmRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
#
# Platform
#
INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Application/UiApp/UiApp.inf
INF QuarkPlatformPkg/Pci/Dxe/PciHostBridge/PciHostBridge.inf
INF QuarkPlatformPkg/Platform/SpiFvbServices/PlatformSpi.inf
INF QuarkPlatformPkg/Platform/SpiFvbServices/PlatformSmmSpi.inf
INF QuarkSocPkg/QuarkNorthCluster/QNCInit/Dxe/QNCInitDxe.inf
INF PcAtChipsetPkg/HpetTimerDxe/HpetTimerDxe.inf
INF QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmAccessDxe/SmmAccess.inf
INF QuarkSocPkg/QuarkNorthCluster/S3Support/Dxe/QncS3Support.inf
INF QuarkSocPkg/QuarkNorthCluster/Spi/PchSpiRuntime.inf
INF QuarkSocPkg/QuarkNorthCluster/Spi/PchSpiSmm.inf
INF QuarkPlatformPkg/Platform/Dxe/Setup/DxePlatform.inf
#
# ACPI
#
INF QuarkPlatformPkg/Platform/Dxe/SaveMemoryConfig/SaveMemoryConfig.inf
INF MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf
#INF MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
INF QuarkPlatformPkg/Acpi/Dxe/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
INF IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf
INF QuarkPlatformPkg/Acpi/Dxe/AcpiPlatform/AcpiPlatform.inf
INF RuleOverride = ACPITABLE QuarkPlatformPkg/Acpi/AcpiTables/AcpiTables.inf
#
# SMM
#
INF MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
INF MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf
INF UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
INF UefiCpuPkg/CpuIo2Smm/CpuIo2Smm.inf
INF QuarkSocPkg/QuarkNorthCluster/Smm/Dxe/SmmControlDxe/SmmControlDxe.inf
INF QuarkSocPkg/QuarkNorthCluster/Smm/DxeSmm/QncSmmDispatcher/QNCSmmDispatcher.inf
INF QuarkPlatformPkg/Acpi/DxeSmm/AcpiSmm/AcpiSmmPlatform.inf
INF QuarkPlatformPkg/Acpi/DxeSmm/SmmPowerManagement/SmmPowerManagement.inf
INF MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf
INF UefiCpuPkg/PiSmmCommunication/PiSmmCommunicationSmm.inf
#
# SMBIOS
#
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF QuarkPlatformPkg/Platform/Dxe/SmbiosMiscDxe/SmbiosMiscDxe.inf
INF QuarkPlatformPkg/Platform/Dxe/MemorySubClass/MemorySubClass.inf
#
# PCI
#
INF QuarkPlatformPkg/Pci/Dxe/PciPlatform/PciPlatform.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF QuarkSocPkg/QuarkSouthCluster/IohInit/Dxe/IohInitDxe.inf
!if $(SOURCE_DEBUG_ENABLE)
!else
INF MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf
!endif
#
# USB
#
!if $(PERFORMANCE_ENABLE)
!else
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/OhciDxe.inf
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
!endif
#
# SDIO
#
!if $(PERFORMANCE_ENABLE)
!else
INF QuarkSocPkg/QuarkSouthCluster/Sdio/Dxe/SDControllerDxe/SDControllerDxe.inf
INF QuarkSocPkg/QuarkSouthCluster/Sdio/Dxe/SDMediaDeviceDxe/SDMediaDeviceDxe.inf
!endif
#
# Console
#
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
#
# File System Modules
#
!if $(PERFORMANCE_ENABLE)
INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf
!else
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF FatPkg/EnhancedFatDxe/Fat.inf
!endif
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FVMAIN_COMPACT]
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 { # TIANO COMPRESS GUID
SECTION FV_IMAGE = FVMAIN
}
}
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.PAYLOAD]
BlockSize = $(FLASH_BLOCKSIZE)
FvAlignment = 16 #FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
#
# Shell and Applications
#
INF RuleOverride = TIANOCOMPRESSED ShellPkg/Application/Shell/Shell.inf
!if $(PERFORMANCE_ENABLE)
INF RuleOverride = TIANOCOMPRESSED PerformancePkg/Dp_App/Dp.inf
!endif
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi
RAW BIN Align = 16 |.com
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM.NORELOC]
FILE PEIM = $(NAMED_GUID) RELOCS_STRIPPED {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_SMM_DRIVER]
FILE SMM = $(NAMED_GUID) {
SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.SMM_CORE]
FILE SMM_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.TIANOCOMPRESSED]
FILE APPLICATION = $(NAMED_GUID) {
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE { # TIANO COMPRESS GUID
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
}
[Rule.Common.UEFI_APPLICATION.UI]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="Enter Setup"
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.USER_DEFINED.ACPITABLE]
FILE FREEFORM = $(NAMED_GUID) {
RAW ACPI |.acpi
RAW ASL |.aml
}