# FLASH layout file for Beagle board.
#
# Copyright (c) 2009, Apple Inc. All rights reserved.<BR>
# Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.BeagleBoard_EFI]
BaseAddress = 0x80007DF8|gArmTokenSpaceGuid.PcdFdBaseAddress #The base address of the FLASH Device.
Size = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize #The size in bytes of the FLASH Device
ErasePolarity = 1
BlockSize = 0x1
NumBlocks = 0xB0000
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x00000000|0x00000200
FILE = BeagleBoardPkg/ConfigurationHeader.bin
0x00000200|0x00000008
DATA = {
0xF8, 0xFD, 0x0A, 0x00, # image size: 0xB0000 - 0x208 == 0xAFDF8
0x00, 0x80, 0x00, 0x80 # entry point: 0x80008000
}
0x00000208|0x000AFDF8
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.FvMain]
BlockSize = 0x1
NumBlocks = 0 # This FV gets compressed so make it just big enough
FvAlignment = 8 # FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FvNameGuid = d0dd3e90-343d-4cb3-8f69-772214989282
INF MdeModulePkg/Core/Dxe/DxeMain.inf
#
# PI DXE Drivers producing Architectural Protocols (EFI Services)
#
INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
!if $(TARGET) == RELEASE
#
# Semi-hosting filesystem
#
INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
!endif
#
# Nand Flash
#
INF Omap35xxPkg/Flash/Flash.inf
#
# MMC/SD
#
INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
INF Omap35xxPkg/MmcHostDxe/MmcHostDxe.inf
#
# I2C
#
INF Omap35xxPkg/SmbusDxe/Smbus.inf
#
# SoC Drivers
#
INF Omap35xxPkg/Gpio/Gpio.inf
INF Omap35xxPkg/InterruptDxe/InterruptDxe.inf
INF Omap35xxPkg/TimerDxe/TimerDxe.inf
INF Omap35xxPkg/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.inf
#
# Power IC
#
INF Omap35xxPkg/TPS65950Dxe/TPS65950.inf
#
# FAT filesystem + GPT/MBR partitioning
#
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF FatBinPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
#
# USB Support
#
INF Omap35xxPkg/PciEmulation/PciEmulation.inf
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
#
# UEFI application (Shell Embedded Boot Loader)
#
INF ShellBinPkg/UefiShell/UefiShell.inf
#
# Bds
#
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF ArmPlatformPkg/Bds/Bds.inf
# Legacy Linux Loader
INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf
[FV.FVMAIN_COMPACT]
FvAlignment = 8
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
INF ArmPlatformPkg/PrePi/PeiUniCore.inf
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
SECTION FV_IMAGE = FVMAIN
}
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
############################################################################
#
#[Rule.Common.DXE_DRIVER]
# FILE DRIVER = $(NAMED_GUID) {
# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
# COMPRESS PI_STD {
# GUIDED {
# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
# UI STRING="$(MODULE_NAME)" Optional
# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
# }
# }
# }
#
############################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.PEIM.TIANOCOMPRESSED]
FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
UI STRING ="$(MODULE_NAME)" Optional
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}