/*
* This file was generated automatically by gen-mterp.py for 'x86_64'.
*
* --> DO NOT EDIT <--
*/
/* File: x86_64/header.S */
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
Art assembly interpreter notes:
First validate assembly code by implementing ExecuteXXXImpl() style body (doesn't
handle invoke, allows higher-level code to create frame & shadow frame.
Once that's working, support direct entry code & eliminate shadow frame (and
excess locals allocation.
Some (hopefully) temporary ugliness. We'll treat rFP as pointing to the
base of the vreg array within the shadow frame. Access the other fields,
dex_pc_, method_ and number_of_vregs_ via negative offsets. For now, we'll continue
the shadow frame mechanism of double-storing object references - via rFP &
number_of_vregs_.
*/
/*
x86_64 ABI general notes:
Caller save set:
rax, rdx, rcx, rsi, rdi, r8-r11, st(0)-st(7)
Callee save set:
rbx, rbp, r12-r15
Return regs:
32-bit in eax
64-bit in rax
fp on xmm0
First 8 fp parameters came in xmm0-xmm7.
First 6 non-fp parameters came in rdi, rsi, rdx, rcx, r8, r9.
Other parameters passed on stack, pushed right-to-left. On entry to target, first
param is at 8(%esp). Traditional entry code is:
Stack must be 16-byte aligned to support SSE in native code.
If we're not doing variable stack allocation (alloca), the frame pointer can be
eliminated and all arg references adjusted to be esp relative.
*/
/*
Mterp and x86_64 notes:
Some key interpreter variables will be assigned to registers.
nick reg purpose
rPROFILE rbp countdown register for jit profiling
rPC r12 interpreted program counter, used for fetching instructions
rFP r13 interpreted frame pointer, used for accessing locals and args
rINSTw bx first 16-bit code of current instruction
rINSTbl bl opcode portion of instruction word
rINSTbh bh high byte of inst word, usually contains src/tgt reg names
rIBASE r14 base of instruction handler table
rREFS r15 base of object references in shadow frame.
Notes:
o High order 16 bits of ebx must be zero on entry to handler
o rPC, rFP, rINSTw/rINSTbl valid on handler entry and exit
o eax and ecx are scratch, rINSTw/ebx sometimes scratch
Macros are provided for common operations. Each macro MUST emit only
one instruction to make instruction-counting easier. They MUST NOT alter
unspecified registers or condition codes.
*/
/*
* This is a #include, not a %include, because we want the C pre-processor
* to expand the macros into assembler assignment statements.
*/
#include "asm_support.h"
/*
* Handle mac compiler specific
*/
#if defined(__APPLE__)
#define MACRO_LITERAL(value) $(value)
#define FUNCTION_TYPE(name)
#define SIZE(start,end)
// Mac OS' symbols have an _ prefix.
#define SYMBOL(name) _ ## name
#else
#define MACRO_LITERAL(value) $value
#define FUNCTION_TYPE(name) .type name, @function
#define SIZE(start,end) .size start, .-end
#define SYMBOL(name) name
#endif
.macro PUSH _reg
pushq \_reg
.cfi_adjust_cfa_offset 8
.cfi_rel_offset \_reg, 0
.endm
.macro POP _reg
popq \_reg
.cfi_adjust_cfa_offset -8
.cfi_restore \_reg
.endm
/*
* Instead of holding a pointer to the shadow frame, we keep rFP at the base of the vregs. So,
* to access other shadow frame fields, we need to use a backwards offset. Define those here.
*/
#define OFF_FP(a) (a - SHADOWFRAME_VREGS_OFFSET)
#define OFF_FP_NUMBER_OF_VREGS OFF_FP(SHADOWFRAME_NUMBER_OF_VREGS_OFFSET)
#define OFF_FP_DEX_PC OFF_FP(SHADOWFRAME_DEX_PC_OFFSET)
#define OFF_FP_LINK OFF_FP(SHADOWFRAME_LINK_OFFSET)
#define OFF_FP_METHOD OFF_FP(SHADOWFRAME_METHOD_OFFSET)
#define OFF_FP_RESULT_REGISTER OFF_FP(SHADOWFRAME_RESULT_REGISTER_OFFSET)
#define OFF_FP_DEX_PC_PTR OFF_FP(SHADOWFRAME_DEX_PC_PTR_OFFSET)
#define OFF_FP_CODE_ITEM OFF_FP(SHADOWFRAME_CODE_ITEM_OFFSET)
#define OFF_FP_COUNTDOWN_OFFSET OFF_FP(SHADOWFRAME_HOTNESS_COUNTDOWN_OFFSET)
#define OFF_FP_SHADOWFRAME (-SHADOWFRAME_VREGS_OFFSET)
/* Frame size must be 16-byte aligned.
* Remember about 8 bytes for return address + 6 * 8 for spills.
*/
#define FRAME_SIZE 8
/* Frame diagram while executing ExecuteMterpImpl, high to low addresses */
#define IN_ARG3 %rcx
#define IN_ARG2 %rdx
#define IN_ARG1 %rsi
#define IN_ARG0 %rdi
/* Spill offsets relative to %esp */
#define SELF_SPILL (FRAME_SIZE - 8)
/* Out Args */
#define OUT_ARG3 %rcx
#define OUT_ARG2 %rdx
#define OUT_ARG1 %rsi
#define OUT_ARG0 %rdi
#define OUT_32_ARG3 %ecx
#define OUT_32_ARG2 %edx
#define OUT_32_ARG1 %esi
#define OUT_32_ARG0 %edi
#define OUT_FP_ARG1 %xmm1
#define OUT_FP_ARG0 %xmm0
/* During bringup, we'll use the shadow frame model instead of rFP */
/* single-purpose registers, given names for clarity */
#define rSELF SELF_SPILL(%rsp)
#define rPC %r12
#define rFP %r13
#define rINST %ebx
#define rINSTq %rbx
#define rINSTw %bx
#define rINSTbh %bh
#define rINSTbl %bl
#define rIBASE %r14
#define rREFS %r15
#define rPROFILE %ebp
#define MTERP_LOGGING 0
/*
* "export" the PC to dex_pc field in the shadow frame, f/b/o future exception objects. Must
* be done *before* something throws.
*
* It's okay to do this more than once.
*
* NOTE: the fast interpreter keeps track of dex pc as a direct pointer to the mapped
* dex byte codes. However, the rest of the runtime expects dex pc to be an instruction
* offset into the code_items_[] array. For effiency, we will "export" the
* current dex pc as a direct pointer using the EXPORT_PC macro, and rely on GetDexPC
* to convert to a dex pc when needed.
*/
.macro EXPORT_PC
movq rPC, OFF_FP_DEX_PC_PTR(rFP)
.endm
/*
* Refresh handler table.
* IBase handles uses the caller save register so we must restore it after each call.
* Also it is used as a result of some 64-bit operations (like imul) and we should
* restore it in such cases also.
*
*/
.macro REFRESH_IBASE
movq rSELF, rIBASE
movq THREAD_CURRENT_IBASE_OFFSET(rIBASE), rIBASE
.endm
/*
* Refresh rINST.
* At enter to handler rINST does not contain the opcode number.
* However some utilities require the full value, so this macro
* restores the opcode number.
*/
.macro REFRESH_INST _opnum
movb rINSTbl, rINSTbh
movb $\_opnum, rINSTbl
.endm
/*
* Fetch the next instruction from rPC into rINSTw. Does not advance rPC.
*/
.macro FETCH_INST
movzwq (rPC), rINSTq
.endm
/*
* Remove opcode from rINST, compute the address of handler and jump to it.
*/
.macro GOTO_NEXT
movzx rINSTbl,%eax
movzbl rINSTbh,rINST
shll MACRO_LITERAL(7), %eax
addq rIBASE, %rax
jmp *%rax
.endm
/*
* Advance rPC by instruction count.
*/
.macro ADVANCE_PC _count
leaq 2*\_count(rPC), rPC
.endm
/*
* Advance rPC by instruction count, fetch instruction and jump to handler.
*/
.macro ADVANCE_PC_FETCH_AND_GOTO_NEXT _count
ADVANCE_PC \_count
FETCH_INST
GOTO_NEXT
.endm
/*
* Get/set the 32-bit value from a Dalvik register.
*/
#define VREG_ADDRESS(_vreg) (rFP,_vreg,4)
#define VREG_REF_ADDRESS(_vreg) (rREFS,_vreg,4)
.macro GET_VREG _reg _vreg
movl (rFP,\_vreg,4), \_reg
.endm
/* Read wide value. */
.macro GET_WIDE_VREG _reg _vreg
movq (rFP,\_vreg,4), \_reg
.endm
.macro SET_VREG _reg _vreg
movl \_reg, (rFP,\_vreg,4)
movl MACRO_LITERAL(0), (rREFS,\_vreg,4)
.endm
/* Write wide value. reg is clobbered. */
.macro SET_WIDE_VREG _reg _vreg
movq \_reg, (rFP,\_vreg,4)
xorq \_reg, \_reg
movq \_reg, (rREFS,\_vreg,4)
.endm
.macro SET_VREG_OBJECT _reg _vreg
movl \_reg, (rFP,\_vreg,4)
movl \_reg, (rREFS,\_vreg,4)
.endm
.macro GET_VREG_HIGH _reg _vreg
movl 4(rFP,\_vreg,4), \_reg
.endm
.macro SET_VREG_HIGH _reg _vreg
movl \_reg, 4(rFP,\_vreg,4)
movl MACRO_LITERAL(0), 4(rREFS,\_vreg,4)
.endm
.macro CLEAR_REF _vreg
movl MACRO_LITERAL(0), (rREFS,\_vreg,4)
.endm
.macro CLEAR_WIDE_REF _vreg
movl MACRO_LITERAL(0), (rREFS,\_vreg,4)
movl MACRO_LITERAL(0), 4(rREFS,\_vreg,4)
.endm
/* File: x86_64/entry.S */
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Interpreter entry point.
*/
.text
.global SYMBOL(ExecuteMterpImpl)
FUNCTION_TYPE(ExecuteMterpImpl)
/*
* On entry:
* 0 Thread* self
* 1 code_item
* 2 ShadowFrame
* 3 JValue* result_register
*
*/
SYMBOL(ExecuteMterpImpl):
.cfi_startproc
.cfi_def_cfa rsp, 8
/* Spill callee save regs */
PUSH %rbx
PUSH %rbp
PUSH %r12
PUSH %r13
PUSH %r14
PUSH %r15
/* Allocate frame */
subq $FRAME_SIZE, %rsp
.cfi_adjust_cfa_offset FRAME_SIZE
/* Remember the return register */
movq IN_ARG3, SHADOWFRAME_RESULT_REGISTER_OFFSET(IN_ARG2)
/* Remember the code_item */
movq IN_ARG1, SHADOWFRAME_CODE_ITEM_OFFSET(IN_ARG2)
/* set up "named" registers */
movl SHADOWFRAME_NUMBER_OF_VREGS_OFFSET(IN_ARG2), %eax
leaq SHADOWFRAME_VREGS_OFFSET(IN_ARG2), rFP
leaq (rFP, %rax, 4), rREFS
movl SHADOWFRAME_DEX_PC_OFFSET(IN_ARG2), %eax
leaq CODEITEM_INSNS_OFFSET(IN_ARG1), rPC
leaq (rPC, %rax, 2), rPC
EXPORT_PC
/* Starting ibase */
movq IN_ARG0, rSELF
REFRESH_IBASE
/* Set up for backwards branches & osr profiling */
movq OFF_FP_METHOD(rFP), OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
call SYMBOL(MterpSetUpHotnessCountdown)
movswl %ax, rPROFILE
/* start executing the instruction at rPC */
FETCH_INST
GOTO_NEXT
/* NOTE: no fallthrough */
.global SYMBOL(artMterpAsmInstructionStart)
FUNCTION_TYPE(SYMBOL(artMterpAsmInstructionStart))
SYMBOL(artMterpAsmInstructionStart) = .L_op_nop
.text
/* ------------------------------ */
.balign 128
.L_op_nop: /* 0x00 */
/* File: x86_64/op_nop.S */
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_move: /* 0x01 */
/* File: x86_64/op_move.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
movl rINST, %eax # eax <- BA
andb $0xf, %al # eax <- A
shrl $4, rINST # rINST <- B
GET_VREG %edx, rINSTq
.if 0
SET_VREG_OBJECT %edx, %rax # fp[A] <- fp[B]
.else
SET_VREG %edx, %rax # fp[A] <- fp[B]
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_move_from16: /* 0x02 */
/* File: x86_64/op_move_from16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
movzwq 2(rPC), %rax # eax <- BBBB
GET_VREG %edx, %rax # edx <- fp[BBBB]
.if 0
SET_VREG_OBJECT %edx, rINSTq # fp[A] <- fp[B]
.else
SET_VREG %edx, rINSTq # fp[A] <- fp[B]
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_move_16: /* 0x03 */
/* File: x86_64/op_move_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
movzwq 4(rPC), %rcx # ecx <- BBBB
movzwq 2(rPC), %rax # eax <- AAAA
GET_VREG %edx, %rcx
.if 0
SET_VREG_OBJECT %edx, %rax # fp[A] <- fp[B]
.else
SET_VREG %edx, %rax # fp[A] <- fp[B]
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 3
/* ------------------------------ */
.balign 128
.L_op_move_wide: /* 0x04 */
/* File: x86_64/op_move_wide.S */
/* move-wide vA, vB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
movl rINST, %ecx # ecx <- BA
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_WIDE_VREG %rdx, rINSTq # rdx <- v[B]
SET_WIDE_VREG %rdx, %rcx # v[A] <- rdx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_move_wide_from16: /* 0x05 */
/* File: x86_64/op_move_wide_from16.S */
/* move-wide/from16 vAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
movzwl 2(rPC), %ecx # ecx <- BBBB
GET_WIDE_VREG %rdx, %rcx # rdx <- v[B]
SET_WIDE_VREG %rdx, rINSTq # v[A] <- rdx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_move_wide_16: /* 0x06 */
/* File: x86_64/op_move_wide_16.S */
/* move-wide/16 vAAAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
movzwq 4(rPC), %rcx # ecx<- BBBB
movzwq 2(rPC), %rax # eax<- AAAA
GET_WIDE_VREG %rdx, %rcx # rdx <- v[B]
SET_WIDE_VREG %rdx, %rax # v[A] <- rdx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 3
/* ------------------------------ */
.balign 128
.L_op_move_object: /* 0x07 */
/* File: x86_64/op_move_object.S */
/* File: x86_64/op_move.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
movl rINST, %eax # eax <- BA
andb $0xf, %al # eax <- A
shrl $4, rINST # rINST <- B
GET_VREG %edx, rINSTq
.if 1
SET_VREG_OBJECT %edx, %rax # fp[A] <- fp[B]
.else
SET_VREG %edx, %rax # fp[A] <- fp[B]
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_move_object_from16: /* 0x08 */
/* File: x86_64/op_move_object_from16.S */
/* File: x86_64/op_move_from16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
movzwq 2(rPC), %rax # eax <- BBBB
GET_VREG %edx, %rax # edx <- fp[BBBB]
.if 1
SET_VREG_OBJECT %edx, rINSTq # fp[A] <- fp[B]
.else
SET_VREG %edx, rINSTq # fp[A] <- fp[B]
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_move_object_16: /* 0x09 */
/* File: x86_64/op_move_object_16.S */
/* File: x86_64/op_move_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
movzwq 4(rPC), %rcx # ecx <- BBBB
movzwq 2(rPC), %rax # eax <- AAAA
GET_VREG %edx, %rcx
.if 1
SET_VREG_OBJECT %edx, %rax # fp[A] <- fp[B]
.else
SET_VREG %edx, %rax # fp[A] <- fp[B]
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 3
/* ------------------------------ */
.balign 128
.L_op_move_result: /* 0x0a */
/* File: x86_64/op_move_result.S */
/* for: move-result, move-result-object */
/* op vAA */
movq OFF_FP_RESULT_REGISTER(rFP), %rax # get pointer to result JType.
movl (%rax), %eax # r0 <- result.i.
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- fp[B]
.else
SET_VREG %eax, rINSTq # fp[A] <- fp[B]
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_move_result_wide: /* 0x0b */
/* File: x86_64/op_move_result_wide.S */
/* move-result-wide vAA */
movq OFF_FP_RESULT_REGISTER(rFP), %rax # get pointer to result JType.
movq (%rax), %rdx # Get wide
SET_WIDE_VREG %rdx, rINSTq # v[AA] <- rdx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_move_result_object: /* 0x0c */
/* File: x86_64/op_move_result_object.S */
/* File: x86_64/op_move_result.S */
/* for: move-result, move-result-object */
/* op vAA */
movq OFF_FP_RESULT_REGISTER(rFP), %rax # get pointer to result JType.
movl (%rax), %eax # r0 <- result.i.
.if 1
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- fp[B]
.else
SET_VREG %eax, rINSTq # fp[A] <- fp[B]
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_move_exception: /* 0x0d */
/* File: x86_64/op_move_exception.S */
/* move-exception vAA */
movq rSELF, %rcx
movl THREAD_EXCEPTION_OFFSET(%rcx), %eax
SET_VREG_OBJECT %eax, rINSTq # fp[AA] <- exception object
movl $0, THREAD_EXCEPTION_OFFSET(%rcx)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_return_void: /* 0x0e */
/* File: x86_64/op_return_void.S */
.extern MterpThreadFenceForConstructor
call SYMBOL(MterpThreadFenceForConstructor)
movq rSELF, OUT_ARG0
testl $(THREAD_SUSPEND_OR_CHECKPOINT_REQUEST), THREAD_FLAGS_OFFSET(OUT_ARG0)
jz 1f
call SYMBOL(MterpSuspendCheck)
1:
xorq %rax, %rax
jmp MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return: /* 0x0f */
/* File: x86_64/op_return.S */
/*
* Return a 32-bit value.
*
* for: return, return-object
*/
/* op vAA */
.extern MterpThreadFenceForConstructor
call SYMBOL(MterpThreadFenceForConstructor)
movq rSELF, OUT_ARG0
testl $(THREAD_SUSPEND_OR_CHECKPOINT_REQUEST), THREAD_FLAGS_OFFSET(OUT_ARG0)
jz 1f
call SYMBOL(MterpSuspendCheck)
1:
GET_VREG %eax, rINSTq # eax <- vAA
jmp MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return_wide: /* 0x10 */
/* File: x86_64/op_return_wide.S */
/*
* Return a 64-bit value.
*/
/* return-wide vAA */
.extern MterpThreadFenceForConstructor
call SYMBOL(MterpThreadFenceForConstructor)
movq rSELF, OUT_ARG0
testl $(THREAD_SUSPEND_OR_CHECKPOINT_REQUEST), THREAD_FLAGS_OFFSET(OUT_ARG0)
jz 1f
call SYMBOL(MterpSuspendCheck)
1:
GET_WIDE_VREG %rax, rINSTq # eax <- v[AA]
jmp MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return_object: /* 0x11 */
/* File: x86_64/op_return_object.S */
/* File: x86_64/op_return.S */
/*
* Return a 32-bit value.
*
* for: return, return-object
*/
/* op vAA */
.extern MterpThreadFenceForConstructor
call SYMBOL(MterpThreadFenceForConstructor)
movq rSELF, OUT_ARG0
testl $(THREAD_SUSPEND_OR_CHECKPOINT_REQUEST), THREAD_FLAGS_OFFSET(OUT_ARG0)
jz 1f
call SYMBOL(MterpSuspendCheck)
1:
GET_VREG %eax, rINSTq # eax <- vAA
jmp MterpReturn
/* ------------------------------ */
.balign 128
.L_op_const_4: /* 0x12 */
/* File: x86_64/op_const_4.S */
/* const/4 vA, #+B */
movsbl rINSTbl, %eax # eax <-ssssssBx
movl $0xf, rINST
andl %eax, rINST # rINST <- A
sarl $4, %eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_const_16: /* 0x13 */
/* File: x86_64/op_const_16.S */
/* const/16 vAA, #+BBBB */
movswl 2(rPC), %ecx # ecx <- ssssBBBB
SET_VREG %ecx, rINSTq # vAA <- ssssBBBB
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_const: /* 0x14 */
/* File: x86_64/op_const.S */
/* const vAA, #+BBBBbbbb */
movl 2(rPC), %eax # grab all 32 bits at once
SET_VREG %eax, rINSTq # vAA<- eax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 3
/* ------------------------------ */
.balign 128
.L_op_const_high16: /* 0x15 */
/* File: x86_64/op_const_high16.S */
/* const/high16 vAA, #+BBBB0000 */
movzwl 2(rPC), %eax # eax <- 0000BBBB
sall $16, %eax # eax <- BBBB0000
SET_VREG %eax, rINSTq # vAA <- eax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_const_wide_16: /* 0x16 */
/* File: x86_64/op_const_wide_16.S */
/* const-wide/16 vAA, #+BBBB */
movswq 2(rPC), %rax # rax <- ssssBBBB
SET_WIDE_VREG %rax, rINSTq # store
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_const_wide_32: /* 0x17 */
/* File: x86_64/op_const_wide_32.S */
/* const-wide/32 vAA, #+BBBBbbbb */
movslq 2(rPC), %rax # eax <- ssssssssBBBBbbbb
SET_WIDE_VREG %rax, rINSTq # store
ADVANCE_PC_FETCH_AND_GOTO_NEXT 3
/* ------------------------------ */
.balign 128
.L_op_const_wide: /* 0x18 */
/* File: x86_64/op_const_wide.S */
/* const-wide vAA, #+HHHHhhhhBBBBbbbb */
movq 2(rPC), %rax # rax <- HHHHhhhhBBBBbbbb
SET_WIDE_VREG %rax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 5
/* ------------------------------ */
.balign 128
.L_op_const_wide_high16: /* 0x19 */
/* File: x86_64/op_const_wide_high16.S */
/* const-wide/high16 vAA, #+BBBB000000000000 */
movzwq 2(rPC), %rax # eax <- 0000BBBB
salq $48, %rax # eax <- BBBB0000
SET_WIDE_VREG %rax, rINSTq # v[AA+0] <- eax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_const_string: /* 0x1a */
/* File: x86_64/op_const_string.S */
/* const/string vAA, String@BBBB */
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # OUT_ARG0 <- BBBB
movq rINSTq, OUT_ARG1
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG2
movq rSELF, OUT_ARG3
call SYMBOL(MterpConstString) # (index, tgt_reg, shadow_frame, self)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_const_string_jumbo: /* 0x1b */
/* File: x86_64/op_const_string_jumbo.S */
/* const/string vAA, String@BBBBBBBB */
EXPORT_PC
movl 2(rPC), OUT_32_ARG0 # OUT_32_ARG0 <- BBBB
movq rINSTq, OUT_ARG1
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG2
movq rSELF, OUT_ARG3
call SYMBOL(MterpConstString) # (index, tgt_reg, shadow_frame, self)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 3
/* ------------------------------ */
.balign 128
.L_op_const_class: /* 0x1c */
/* File: x86_64/op_const_class.S */
/* const/class vAA, Class@BBBB */
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # eax <- OUT_ARG0
movq rINSTq, OUT_ARG1
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG2
movq rSELF, OUT_ARG3
call SYMBOL(MterpConstClass) # (index, tgt_reg, shadow_frame, self)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_monitor_enter: /* 0x1d */
/* File: x86_64/op_monitor_enter.S */
/*
* Synchronize on an object.
*/
/* monitor-enter vAA */
EXPORT_PC
GET_VREG OUT_32_ARG0, rINSTq
movq rSELF, OUT_ARG1
call SYMBOL(artLockObjectFromCode) # (object, self)
testq %rax, %rax
jnz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_monitor_exit: /* 0x1e */
/* File: x86_64/op_monitor_exit.S */
/*
* Unlock an object.
*
* Exceptions that occur when unlocking a monitor need to appear as
* if they happened at the following instruction. See the Dalvik
* instruction spec.
*/
/* monitor-exit vAA */
EXPORT_PC
GET_VREG OUT_32_ARG0, rINSTq
movq rSELF, OUT_ARG1
call SYMBOL(artUnlockObjectFromCode) # (object, self)
testq %rax, %rax
jnz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_check_cast: /* 0x1f */
/* File: x86_64/op_check_cast.S */
/*
* Check to see if a cast from one class to another is allowed.
*/
/* check-cast vAA, class@BBBB */
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # OUT_ARG0 <- BBBB
leaq VREG_ADDRESS(rINSTq), OUT_ARG1
movq OFF_FP_METHOD(rFP), OUT_ARG2
movq rSELF, OUT_ARG3
call SYMBOL(MterpCheckCast) # (index, &obj, method, self)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_instance_of: /* 0x20 */
/* File: x86_64/op_instance_of.S */
/*
* Check to see if an object reference is an instance of a class.
*
* Most common situation is a non-null object, being compared against
* an already-resolved class.
*/
/* instance-of vA, vB, class@CCCC */
EXPORT_PC
movzwl 2(rPC), OUT_32_ARG0 # OUT_32_ARG0 <- CCCC
movl rINST, %eax # eax <- BA
sarl $4, %eax # eax <- B
leaq VREG_ADDRESS(%rax), OUT_ARG1 # Get object address
movq OFF_FP_METHOD(rFP), OUT_ARG2
movq rSELF, OUT_ARG3
call SYMBOL(MterpInstanceOf) # (index, &obj, method, self)
movsbl %al, %eax
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException
andb $0xf, rINSTbl # rINSTbl <- A
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_array_length: /* 0x21 */
/* File: x86_64/op_array_length.S */
/*
* Return the length of an array.
*/
movl rINST, %eax # eax <- BA
sarl $4, rINST # rINST <- B
GET_VREG %ecx, rINSTq # ecx <- vB (object ref)
testl %ecx, %ecx # is null?
je common_errNullObject
andb $0xf, %al # eax <- A
movl MIRROR_ARRAY_LENGTH_OFFSET(%rcx), rINST
SET_VREG rINST, %rax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_new_instance: /* 0x22 */
/* File: x86_64/op_new_instance.S */
/*
* Create a new instance of a class.
*/
/* new-instance vAA, class@BBBB */
EXPORT_PC
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG0
movq rSELF, OUT_ARG1
REFRESH_INST 34
movq rINSTq, OUT_ARG2
call SYMBOL(MterpNewInstance)
testb %al, %al # 0 means an exception is thrown
jz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_new_array: /* 0x23 */
/* File: x86_64/op_new_array.S */
/*
* Allocate an array of objects, specified with the array class
* and a count.
*
* The verifier guarantees that this is an array class, so we don't
* check for it here.
*/
/* new-array vA, vB, class@CCCC */
EXPORT_PC
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG0
movq rPC, OUT_ARG1
REFRESH_INST 35
movq rINSTq, OUT_ARG2
movq rSELF, OUT_ARG3
call SYMBOL(MterpNewArray)
testb %al, %al # 0 means an exception is thrown
jz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_filled_new_array: /* 0x24 */
/* File: x86_64/op_filled_new_array.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type@BBBB */
.extern MterpFilledNewArray
EXPORT_PC
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG0
movq rPC, OUT_ARG1
movq rSELF, OUT_ARG2
call SYMBOL(MterpFilledNewArray)
testb %al, %al # 0 means an exception is thrown
jz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 3
/* ------------------------------ */
.balign 128
.L_op_filled_new_array_range: /* 0x25 */
/* File: x86_64/op_filled_new_array_range.S */
/* File: x86_64/op_filled_new_array.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type@BBBB */
.extern MterpFilledNewArrayRange
EXPORT_PC
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG0
movq rPC, OUT_ARG1
movq rSELF, OUT_ARG2
call SYMBOL(MterpFilledNewArrayRange)
testb %al, %al # 0 means an exception is thrown
jz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 3
/* ------------------------------ */
.balign 128
.L_op_fill_array_data: /* 0x26 */
/* File: x86_64/op_fill_array_data.S */
/* fill-array-data vAA, +BBBBBBBB */
EXPORT_PC
movslq 2(rPC), %rcx # rcx <- ssssssssBBBBbbbb
leaq (rPC,%rcx,2), OUT_ARG1 # OUT_ARG1 <- PC + ssssssssBBBBbbbb*2
GET_VREG OUT_32_ARG0, rINSTq # OUT_ARG0 <- vAA (array object)
call SYMBOL(MterpFillArrayData) # (obj, payload)
testb %al, %al # 0 means an exception is thrown
jz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 3
/* ------------------------------ */
.balign 128
.L_op_throw: /* 0x27 */
/* File: x86_64/op_throw.S */
/*
* Throw an exception object in the current thread.
*/
/* throw vAA */
EXPORT_PC
GET_VREG %eax, rINSTq # eax<- vAA (exception object)
testb %al, %al
jz common_errNullObject
movq rSELF, %rcx
movq %rax, THREAD_EXCEPTION_OFFSET(%rcx)
jmp MterpException
/* ------------------------------ */
.balign 128
.L_op_goto: /* 0x28 */
/* File: x86_64/op_goto.S */
/*
* Unconditional branch, 8-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto +AA */
movsbq rINSTbl, rINSTq # rINSTq <- ssssssAA
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
/* ------------------------------ */
.balign 128
.L_op_goto_16: /* 0x29 */
/* File: x86_64/op_goto_16.S */
/*
* Unconditional branch, 16-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto/16 +AAAA */
movswq 2(rPC), rINSTq # rINSTq <- ssssAAAA
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
/* ------------------------------ */
.balign 128
.L_op_goto_32: /* 0x2a */
/* File: x86_64/op_goto_32.S */
/*
* Unconditional branch, 32-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*
* Because we need the SF bit set, we'll use an adds
* to convert from Dalvik offset to byte offset.
*/
/* goto/32 +AAAAAAAA */
movslq 2(rPC), rINSTq # rINSTq <- AAAAAAAA
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
/* ------------------------------ */
.balign 128
.L_op_packed_switch: /* 0x2b */
/* File: x86_64/op_packed_switch.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
movslq 2(rPC), OUT_ARG0 # rcx <- ssssssssBBBBbbbb
leaq (rPC,OUT_ARG0,2), OUT_ARG0 # rcx <- PC + ssssssssBBBBbbbb*2
GET_VREG OUT_32_ARG1, rINSTq # eax <- vAA
call SYMBOL(MterpDoPackedSwitch)
testl %eax, %eax
movslq %eax, rINSTq
jmp MterpCommonTakenBranch
/* ------------------------------ */
.balign 128
.L_op_sparse_switch: /* 0x2c */
/* File: x86_64/op_sparse_switch.S */
/* File: x86_64/op_packed_switch.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
movslq 2(rPC), OUT_ARG0 # rcx <- ssssssssBBBBbbbb
leaq (rPC,OUT_ARG0,2), OUT_ARG0 # rcx <- PC + ssssssssBBBBbbbb*2
GET_VREG OUT_32_ARG1, rINSTq # eax <- vAA
call SYMBOL(MterpDoSparseSwitch)
testl %eax, %eax
movslq %eax, rINSTq
jmp MterpCommonTakenBranch
/* ------------------------------ */
.balign 128
.L_op_cmpl_float: /* 0x2d */
/* File: x86_64/op_cmpl_float.S */
/* File: x86_64/fpcmp.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x < y) {
* return -1;
* } else if (x > y) {
* return 1;
* } else {
* return nanval ? 1 : -1;
* }
* }
*/
/* op vAA, vBB, vCC */
movzbq 3(rPC), %rcx # ecx<- CC
movzbq 2(rPC), %rax # eax<- BB
movss VREG_ADDRESS(%rax), %xmm0
xor %eax, %eax
ucomiss VREG_ADDRESS(%rcx), %xmm0
jp .Lop_cmpl_float_nan_is_neg
je .Lop_cmpl_float_finish
jb .Lop_cmpl_float_less
.Lop_cmpl_float_nan_is_pos:
addb $1, %al
jmp .Lop_cmpl_float_finish
.Lop_cmpl_float_nan_is_neg:
.Lop_cmpl_float_less:
movl $-1, %eax
.Lop_cmpl_float_finish:
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_cmpg_float: /* 0x2e */
/* File: x86_64/op_cmpg_float.S */
/* File: x86_64/fpcmp.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x < y) {
* return -1;
* } else if (x > y) {
* return 1;
* } else {
* return nanval ? 1 : -1;
* }
* }
*/
/* op vAA, vBB, vCC */
movzbq 3(rPC), %rcx # ecx<- CC
movzbq 2(rPC), %rax # eax<- BB
movss VREG_ADDRESS(%rax), %xmm0
xor %eax, %eax
ucomiss VREG_ADDRESS(%rcx), %xmm0
jp .Lop_cmpg_float_nan_is_pos
je .Lop_cmpg_float_finish
jb .Lop_cmpg_float_less
.Lop_cmpg_float_nan_is_pos:
addb $1, %al
jmp .Lop_cmpg_float_finish
.Lop_cmpg_float_nan_is_neg:
.Lop_cmpg_float_less:
movl $-1, %eax
.Lop_cmpg_float_finish:
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_cmpl_double: /* 0x2f */
/* File: x86_64/op_cmpl_double.S */
/* File: x86_64/fpcmp.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x < y) {
* return -1;
* } else if (x > y) {
* return 1;
* } else {
* return nanval ? 1 : -1;
* }
* }
*/
/* op vAA, vBB, vCC */
movzbq 3(rPC), %rcx # ecx<- CC
movzbq 2(rPC), %rax # eax<- BB
movsd VREG_ADDRESS(%rax), %xmm0
xor %eax, %eax
ucomisd VREG_ADDRESS(%rcx), %xmm0
jp .Lop_cmpl_double_nan_is_neg
je .Lop_cmpl_double_finish
jb .Lop_cmpl_double_less
.Lop_cmpl_double_nan_is_pos:
addb $1, %al
jmp .Lop_cmpl_double_finish
.Lop_cmpl_double_nan_is_neg:
.Lop_cmpl_double_less:
movl $-1, %eax
.Lop_cmpl_double_finish:
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_cmpg_double: /* 0x30 */
/* File: x86_64/op_cmpg_double.S */
/* File: x86_64/fpcmp.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x < y) {
* return -1;
* } else if (x > y) {
* return 1;
* } else {
* return nanval ? 1 : -1;
* }
* }
*/
/* op vAA, vBB, vCC */
movzbq 3(rPC), %rcx # ecx<- CC
movzbq 2(rPC), %rax # eax<- BB
movsd VREG_ADDRESS(%rax), %xmm0
xor %eax, %eax
ucomisd VREG_ADDRESS(%rcx), %xmm0
jp .Lop_cmpg_double_nan_is_pos
je .Lop_cmpg_double_finish
jb .Lop_cmpg_double_less
.Lop_cmpg_double_nan_is_pos:
addb $1, %al
jmp .Lop_cmpg_double_finish
.Lop_cmpg_double_nan_is_neg:
.Lop_cmpg_double_less:
movl $-1, %eax
.Lop_cmpg_double_finish:
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_cmp_long: /* 0x31 */
/* File: x86_64/op_cmp_long.S */
/*
* Compare two 64-bit values. Puts 0, 1, or -1 into the destination
* register based on the results of the comparison.
*/
/* cmp-long vAA, vBB, vCC */
movzbq 2(rPC), %rdx # edx <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_WIDE_VREG %rdx, %rdx # rdx <- v[BB]
xorl %eax, %eax
xorl %edi, %edi
addb $1, %al
movl $-1, %esi
cmpq VREG_ADDRESS(%rcx), %rdx
cmovl %esi, %edi
cmovg %eax, %edi
SET_VREG %edi, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_eq: /* 0x32 */
/* File: x86_64/op_if_eq.S */
/* File: x86_64/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # rcx <- A
GET_VREG %eax, %rcx # eax <- vA
cmpl VREG_ADDRESS(rINSTq), %eax # compare (vA, vB)
jne 1f
movswq 2(rPC), rINSTq # Get signed branch offset
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_ne: /* 0x33 */
/* File: x86_64/op_if_ne.S */
/* File: x86_64/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # rcx <- A
GET_VREG %eax, %rcx # eax <- vA
cmpl VREG_ADDRESS(rINSTq), %eax # compare (vA, vB)
je 1f
movswq 2(rPC), rINSTq # Get signed branch offset
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_lt: /* 0x34 */
/* File: x86_64/op_if_lt.S */
/* File: x86_64/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # rcx <- A
GET_VREG %eax, %rcx # eax <- vA
cmpl VREG_ADDRESS(rINSTq), %eax # compare (vA, vB)
jge 1f
movswq 2(rPC), rINSTq # Get signed branch offset
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_ge: /* 0x35 */
/* File: x86_64/op_if_ge.S */
/* File: x86_64/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # rcx <- A
GET_VREG %eax, %rcx # eax <- vA
cmpl VREG_ADDRESS(rINSTq), %eax # compare (vA, vB)
jl 1f
movswq 2(rPC), rINSTq # Get signed branch offset
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_gt: /* 0x36 */
/* File: x86_64/op_if_gt.S */
/* File: x86_64/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # rcx <- A
GET_VREG %eax, %rcx # eax <- vA
cmpl VREG_ADDRESS(rINSTq), %eax # compare (vA, vB)
jle 1f
movswq 2(rPC), rINSTq # Get signed branch offset
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_le: /* 0x37 */
/* File: x86_64/op_if_le.S */
/* File: x86_64/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # rcx <- A
GET_VREG %eax, %rcx # eax <- vA
cmpl VREG_ADDRESS(rINSTq), %eax # compare (vA, vB)
jg 1f
movswq 2(rPC), rINSTq # Get signed branch offset
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_eqz: /* 0x38 */
/* File: x86_64/op_if_eqz.S */
/* File: x86_64/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
cmpl $0, VREG_ADDRESS(rINSTq) # compare (vA, 0)
jne 1f
movswq 2(rPC), rINSTq # fetch signed displacement
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_nez: /* 0x39 */
/* File: x86_64/op_if_nez.S */
/* File: x86_64/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
cmpl $0, VREG_ADDRESS(rINSTq) # compare (vA, 0)
je 1f
movswq 2(rPC), rINSTq # fetch signed displacement
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_ltz: /* 0x3a */
/* File: x86_64/op_if_ltz.S */
/* File: x86_64/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
cmpl $0, VREG_ADDRESS(rINSTq) # compare (vA, 0)
jge 1f
movswq 2(rPC), rINSTq # fetch signed displacement
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_gez: /* 0x3b */
/* File: x86_64/op_if_gez.S */
/* File: x86_64/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
cmpl $0, VREG_ADDRESS(rINSTq) # compare (vA, 0)
jl 1f
movswq 2(rPC), rINSTq # fetch signed displacement
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_gtz: /* 0x3c */
/* File: x86_64/op_if_gtz.S */
/* File: x86_64/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
cmpl $0, VREG_ADDRESS(rINSTq) # compare (vA, 0)
jle 1f
movswq 2(rPC), rINSTq # fetch signed displacement
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_if_lez: /* 0x3d */
/* File: x86_64/op_if_lez.S */
/* File: x86_64/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
cmpl $0, VREG_ADDRESS(rINSTq) # compare (vA, 0)
jg 1f
movswq 2(rPC), rINSTq # fetch signed displacement
testq rINSTq, rINSTq
jmp MterpCommonTakenBranch
1:
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_check_not_taken_osr
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_unused_3e: /* 0x3e */
/* File: x86_64/op_unused_3e.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_3f: /* 0x3f */
/* File: x86_64/op_unused_3f.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_40: /* 0x40 */
/* File: x86_64/op_unused_40.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_41: /* 0x41 */
/* File: x86_64/op_unused_41.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_42: /* 0x42 */
/* File: x86_64/op_unused_42.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_43: /* 0x43 */
/* File: x86_64/op_unused_43.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_aget: /* 0x44 */
/* File: x86_64/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short, aget-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
movq MIRROR_INT_ARRAY_DATA_OFFSET(%rax,%rcx,8), %rax
SET_WIDE_VREG %rax, rINSTq
.else
movl MIRROR_INT_ARRAY_DATA_OFFSET(%rax,%rcx,4), %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aget_wide: /* 0x45 */
/* File: x86_64/op_aget_wide.S */
/* File: x86_64/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short, aget-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 1
movq MIRROR_WIDE_ARRAY_DATA_OFFSET(%rax,%rcx,8), %rax
SET_WIDE_VREG %rax, rINSTq
.else
movq MIRROR_WIDE_ARRAY_DATA_OFFSET(%rax,%rcx,8), %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aget_object: /* 0x46 */
/* File: x86_64/op_aget_object.S */
/*
* Array object get. vAA <- vBB[vCC].
*
* for: aget-object
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG OUT_32_ARG0, %rax # eax <- vBB (array object)
GET_VREG OUT_32_ARG1, %rcx # ecx <- vCC (requested index)
EXPORT_PC
call SYMBOL(artAGetObjectFromMterp) # (array, index)
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException
SET_VREG_OBJECT %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aget_boolean: /* 0x47 */
/* File: x86_64/op_aget_boolean.S */
/* File: x86_64/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short, aget-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
movq MIRROR_BOOLEAN_ARRAY_DATA_OFFSET(%rax,%rcx,8), %rax
SET_WIDE_VREG %rax, rINSTq
.else
movzbl MIRROR_BOOLEAN_ARRAY_DATA_OFFSET(%rax,%rcx,1), %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aget_byte: /* 0x48 */
/* File: x86_64/op_aget_byte.S */
/* File: x86_64/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short, aget-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
movq MIRROR_BYTE_ARRAY_DATA_OFFSET(%rax,%rcx,8), %rax
SET_WIDE_VREG %rax, rINSTq
.else
movsbl MIRROR_BYTE_ARRAY_DATA_OFFSET(%rax,%rcx,1), %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aget_char: /* 0x49 */
/* File: x86_64/op_aget_char.S */
/* File: x86_64/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short, aget-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
movq MIRROR_CHAR_ARRAY_DATA_OFFSET(%rax,%rcx,8), %rax
SET_WIDE_VREG %rax, rINSTq
.else
movzwl MIRROR_CHAR_ARRAY_DATA_OFFSET(%rax,%rcx,2), %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aget_short: /* 0x4a */
/* File: x86_64/op_aget_short.S */
/* File: x86_64/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short, aget-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
movq MIRROR_SHORT_ARRAY_DATA_OFFSET(%rax,%rcx,8), %rax
SET_WIDE_VREG %rax, rINSTq
.else
movswl MIRROR_SHORT_ARRAY_DATA_OFFSET(%rax,%rcx,2), %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aput: /* 0x4b */
/* File: x86_64/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short, aput-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
GET_WIDE_VREG rINSTq, rINSTq
.else
GET_VREG rINST, rINSTq
.endif
movl rINST, MIRROR_INT_ARRAY_DATA_OFFSET(%rax,%rcx,4)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aput_wide: /* 0x4c */
/* File: x86_64/op_aput_wide.S */
/* File: x86_64/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short, aput-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 1
GET_WIDE_VREG rINSTq, rINSTq
.else
GET_VREG rINST, rINSTq
.endif
movq rINSTq, MIRROR_WIDE_ARRAY_DATA_OFFSET(%rax,%rcx,8)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aput_object: /* 0x4d */
/* File: x86_64/op_aput_object.S */
/*
* Store an object into an array. vBB[vCC] <- vAA.
*/
/* op vAA, vBB, vCC */
EXPORT_PC
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG0
movq rPC, OUT_ARG1
REFRESH_INST 77
movq rINSTq, OUT_ARG2
call SYMBOL(MterpAputObject) # (array, index)
testb %al, %al
jz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aput_boolean: /* 0x4e */
/* File: x86_64/op_aput_boolean.S */
/* File: x86_64/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short, aput-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
GET_WIDE_VREG rINSTq, rINSTq
.else
GET_VREG rINST, rINSTq
.endif
movb rINSTbl, MIRROR_BOOLEAN_ARRAY_DATA_OFFSET(%rax,%rcx,1)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aput_byte: /* 0x4f */
/* File: x86_64/op_aput_byte.S */
/* File: x86_64/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short, aput-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
GET_WIDE_VREG rINSTq, rINSTq
.else
GET_VREG rINST, rINSTq
.endif
movb rINSTbl, MIRROR_BYTE_ARRAY_DATA_OFFSET(%rax,%rcx,1)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aput_char: /* 0x50 */
/* File: x86_64/op_aput_char.S */
/* File: x86_64/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short, aput-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
GET_WIDE_VREG rINSTq, rINSTq
.else
GET_VREG rINST, rINSTq
.endif
movw rINSTw, MIRROR_CHAR_ARRAY_DATA_OFFSET(%rax,%rcx,2)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_aput_short: /* 0x51 */
/* File: x86_64/op_aput_short.S */
/* File: x86_64/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short, aput-wide
*
*/
/* op vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB (array object)
GET_VREG %ecx, %rcx # ecx <- vCC (requested index)
testl %eax, %eax # null array object?
je common_errNullObject # bail if so
cmpl MIRROR_ARRAY_LENGTH_OFFSET(%eax), %ecx
jae common_errArrayIndex # index >= length, bail.
.if 0
GET_WIDE_VREG rINSTq, rINSTq
.else
GET_VREG rINST, rINSTq
.endif
movw rINSTw, MIRROR_SHORT_ARRAY_DATA_OFFSET(%rax,%rcx,2)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget: /* 0x52 */
/* File: x86_64/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short, iget-wide
*/
EXPORT_PC
movzbq rINSTbl, %rcx # rcx <- BA
movzwl 2(rPC), OUT_32_ARG0 # eax <- field ref CCCC
sarl $4, %ecx # ecx <- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3
call SYMBOL(artGet32InstanceFromCode)
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException # bail out
andb $0xf, rINSTbl # rINST <- A
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <-value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <-value
.else
SET_VREG %eax, rINSTq # fp[A] <-value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_wide: /* 0x53 */
/* File: x86_64/op_iget_wide.S */
/* File: x86_64/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short, iget-wide
*/
EXPORT_PC
movzbq rINSTbl, %rcx # rcx <- BA
movzwl 2(rPC), OUT_32_ARG0 # eax <- field ref CCCC
sarl $4, %ecx # ecx <- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3
call SYMBOL(artGet64InstanceFromCode)
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException # bail out
andb $0xf, rINSTbl # rINST <- A
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <-value
.else
.if 1
SET_WIDE_VREG %rax, rINSTq # fp[A] <-value
.else
SET_VREG %eax, rINSTq # fp[A] <-value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_object: /* 0x54 */
/* File: x86_64/op_iget_object.S */
/* File: x86_64/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short, iget-wide
*/
EXPORT_PC
movzbq rINSTbl, %rcx # rcx <- BA
movzwl 2(rPC), OUT_32_ARG0 # eax <- field ref CCCC
sarl $4, %ecx # ecx <- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3
call SYMBOL(artGetObjInstanceFromCode)
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException # bail out
andb $0xf, rINSTbl # rINST <- A
.if 1
SET_VREG_OBJECT %eax, rINSTq # fp[A] <-value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <-value
.else
SET_VREG %eax, rINSTq # fp[A] <-value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_boolean: /* 0x55 */
/* File: x86_64/op_iget_boolean.S */
/* File: x86_64/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short, iget-wide
*/
EXPORT_PC
movzbq rINSTbl, %rcx # rcx <- BA
movzwl 2(rPC), OUT_32_ARG0 # eax <- field ref CCCC
sarl $4, %ecx # ecx <- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3
call SYMBOL(artGetBooleanInstanceFromCode)
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException # bail out
andb $0xf, rINSTbl # rINST <- A
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <-value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <-value
.else
SET_VREG %eax, rINSTq # fp[A] <-value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_byte: /* 0x56 */
/* File: x86_64/op_iget_byte.S */
/* File: x86_64/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short, iget-wide
*/
EXPORT_PC
movzbq rINSTbl, %rcx # rcx <- BA
movzwl 2(rPC), OUT_32_ARG0 # eax <- field ref CCCC
sarl $4, %ecx # ecx <- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3
call SYMBOL(artGetByteInstanceFromCode)
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException # bail out
andb $0xf, rINSTbl # rINST <- A
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <-value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <-value
.else
SET_VREG %eax, rINSTq # fp[A] <-value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_char: /* 0x57 */
/* File: x86_64/op_iget_char.S */
/* File: x86_64/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short, iget-wide
*/
EXPORT_PC
movzbq rINSTbl, %rcx # rcx <- BA
movzwl 2(rPC), OUT_32_ARG0 # eax <- field ref CCCC
sarl $4, %ecx # ecx <- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3
call SYMBOL(artGetCharInstanceFromCode)
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException # bail out
andb $0xf, rINSTbl # rINST <- A
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <-value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <-value
.else
SET_VREG %eax, rINSTq # fp[A] <-value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_short: /* 0x58 */
/* File: x86_64/op_iget_short.S */
/* File: x86_64/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short, iget-wide
*/
EXPORT_PC
movzbq rINSTbl, %rcx # rcx <- BA
movzwl 2(rPC), OUT_32_ARG0 # eax <- field ref CCCC
sarl $4, %ecx # ecx <- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3
call SYMBOL(artGetShortInstanceFromCode)
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException # bail out
andb $0xf, rINSTbl # rINST <- A
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <-value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <-value
.else
SET_VREG %eax, rINSTq # fp[A] <-value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput: /* 0x59 */
/* File: x86_64/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet32InstanceFromMterp
EXPORT_PC
movzwl 2(rPC), OUT_32_ARG0 # field ref <- 0000CCCC
movzbq rINSTbl, %rcx # rcx<- BA
sarl $4, %ecx # ecx<- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
andb $0xf, rINSTbl # rINST<- A
GET_VREG OUT_32_ARG2, rINSTq # fp[A]
movq OFF_FP_METHOD(rFP), OUT_ARG3 # referrer
call SYMBOL(artSet32InstanceFromMterp)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_wide: /* 0x5a */
/* File: x86_64/op_iput_wide.S */
/* iput-wide vA, vB, field@CCCC */
.extern artSet64InstanceFromMterp
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref CCCC
movzbq rINSTbl, %rcx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
andb $0xf, rINSTbl # rINST <- A
leaq VREG_ADDRESS(rINSTq), OUT_ARG2 # &fp[A]
movq OFF_FP_METHOD(rFP), OUT_ARG3 # referrer
call SYMBOL(artSet64InstanceFromMterp)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_object: /* 0x5b */
/* File: x86_64/op_iput_object.S */
EXPORT_PC
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG0
movq rPC, OUT_ARG1
REFRESH_INST 91
movl rINST, OUT_32_ARG2
movq rSELF, OUT_ARG3
call SYMBOL(MterpIputObject)
testb %al, %al
jz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_boolean: /* 0x5c */
/* File: x86_64/op_iput_boolean.S */
/* File: x86_64/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet8InstanceFromMterp
EXPORT_PC
movzwl 2(rPC), OUT_32_ARG0 # field ref <- 0000CCCC
movzbq rINSTbl, %rcx # rcx<- BA
sarl $4, %ecx # ecx<- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
andb $0xf, rINSTbl # rINST<- A
GET_VREG OUT_32_ARG2, rINSTq # fp[A]
movq OFF_FP_METHOD(rFP), OUT_ARG3 # referrer
call SYMBOL(artSet8InstanceFromMterp)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_byte: /* 0x5d */
/* File: x86_64/op_iput_byte.S */
/* File: x86_64/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet8InstanceFromMterp
EXPORT_PC
movzwl 2(rPC), OUT_32_ARG0 # field ref <- 0000CCCC
movzbq rINSTbl, %rcx # rcx<- BA
sarl $4, %ecx # ecx<- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
andb $0xf, rINSTbl # rINST<- A
GET_VREG OUT_32_ARG2, rINSTq # fp[A]
movq OFF_FP_METHOD(rFP), OUT_ARG3 # referrer
call SYMBOL(artSet8InstanceFromMterp)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_char: /* 0x5e */
/* File: x86_64/op_iput_char.S */
/* File: x86_64/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet16InstanceFromMterp
EXPORT_PC
movzwl 2(rPC), OUT_32_ARG0 # field ref <- 0000CCCC
movzbq rINSTbl, %rcx # rcx<- BA
sarl $4, %ecx # ecx<- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
andb $0xf, rINSTbl # rINST<- A
GET_VREG OUT_32_ARG2, rINSTq # fp[A]
movq OFF_FP_METHOD(rFP), OUT_ARG3 # referrer
call SYMBOL(artSet16InstanceFromMterp)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_short: /* 0x5f */
/* File: x86_64/op_iput_short.S */
/* File: x86_64/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
.extern artSet16InstanceFromMterp
EXPORT_PC
movzwl 2(rPC), OUT_32_ARG0 # field ref <- 0000CCCC
movzbq rINSTbl, %rcx # rcx<- BA
sarl $4, %ecx # ecx<- B
GET_VREG OUT_32_ARG1, %rcx # the object pointer
andb $0xf, rINSTbl # rINST<- A
GET_VREG OUT_32_ARG2, rINSTq # fp[A]
movq OFF_FP_METHOD(rFP), OUT_ARG3 # referrer
call SYMBOL(artSet16InstanceFromMterp)
testb %al, %al
jnz MterpPossibleException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sget: /* 0x60 */
/* File: x86_64/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short, sget-wide
*/
/* op vAA, field@BBBB */
.extern MterpGet32Static
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref CCCC
movq OFF_FP_METHOD(rFP), OUT_ARG1 # referrer
movq rSELF, OUT_ARG2 # self
call SYMBOL(MterpGet32Static)
movq rSELF, %rcx
cmpl $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sget_wide: /* 0x61 */
/* File: x86_64/op_sget_wide.S */
/* File: x86_64/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short, sget-wide
*/
/* op vAA, field@BBBB */
.extern MterpGet64Static
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref CCCC
movq OFF_FP_METHOD(rFP), OUT_ARG1 # referrer
movq rSELF, OUT_ARG2 # self
call SYMBOL(MterpGet64Static)
movq rSELF, %rcx
cmpl $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- value
.else
.if 1
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sget_object: /* 0x62 */
/* File: x86_64/op_sget_object.S */
/* File: x86_64/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short, sget-wide
*/
/* op vAA, field@BBBB */
.extern MterpGetObjStatic
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref CCCC
movq OFF_FP_METHOD(rFP), OUT_ARG1 # referrer
movq rSELF, OUT_ARG2 # self
call SYMBOL(MterpGetObjStatic)
movq rSELF, %rcx
cmpl $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException
.if 1
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sget_boolean: /* 0x63 */
/* File: x86_64/op_sget_boolean.S */
/* File: x86_64/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short, sget-wide
*/
/* op vAA, field@BBBB */
.extern MterpGetBooleanStatic
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref CCCC
movq OFF_FP_METHOD(rFP), OUT_ARG1 # referrer
movq rSELF, OUT_ARG2 # self
call SYMBOL(MterpGetBooleanStatic)
movq rSELF, %rcx
cmpl $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sget_byte: /* 0x64 */
/* File: x86_64/op_sget_byte.S */
/* File: x86_64/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short, sget-wide
*/
/* op vAA, field@BBBB */
.extern MterpGetByteStatic
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref CCCC
movq OFF_FP_METHOD(rFP), OUT_ARG1 # referrer
movq rSELF, OUT_ARG2 # self
call SYMBOL(MterpGetByteStatic)
movq rSELF, %rcx
cmpl $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sget_char: /* 0x65 */
/* File: x86_64/op_sget_char.S */
/* File: x86_64/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short, sget-wide
*/
/* op vAA, field@BBBB */
.extern MterpGetCharStatic
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref CCCC
movq OFF_FP_METHOD(rFP), OUT_ARG1 # referrer
movq rSELF, OUT_ARG2 # self
call SYMBOL(MterpGetCharStatic)
movq rSELF, %rcx
cmpl $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sget_short: /* 0x66 */
/* File: x86_64/op_sget_short.S */
/* File: x86_64/op_sget.S */
/*
* General SGET handler wrapper.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short, sget-wide
*/
/* op vAA, field@BBBB */
.extern MterpGetShortStatic
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref CCCC
movq OFF_FP_METHOD(rFP), OUT_ARG1 # referrer
movq rSELF, OUT_ARG2 # self
call SYMBOL(MterpGetShortStatic)
movq rSELF, %rcx
cmpl $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException
.if 0
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- value
.else
.if 0
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sput: /* 0x67 */
/* File: x86_64/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
.extern MterpSet32Static
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref BBBB
GET_VREG OUT_32_ARG1, rINSTq # fp[AA]
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3 # self
call SYMBOL(MterpSet32Static)
testb %al, %al
jnz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sput_wide: /* 0x68 */
/* File: x86_64/op_sput_wide.S */
/*
* SPUT_WIDE handler wrapper.
*
*/
/* sput-wide vAA, field@BBBB */
.extern MterpSet64Static
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref BBBB
leaq VREG_ADDRESS(rINSTq), OUT_ARG1 # &fp[AA]
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3 # self
call SYMBOL(MterpSet64Static)
testb %al, %al
jnz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sput_object: /* 0x69 */
/* File: x86_64/op_sput_object.S */
EXPORT_PC
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG0
movq rPC, OUT_ARG1
REFRESH_INST 105
movq rINSTq, OUT_ARG2
movq rSELF, OUT_ARG3
call SYMBOL(MterpSputObject)
testb %al, %al
jz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sput_boolean: /* 0x6a */
/* File: x86_64/op_sput_boolean.S */
/* File: x86_64/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
.extern MterpSetBooleanStatic
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref BBBB
GET_VREG OUT_32_ARG1, rINSTq # fp[AA]
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3 # self
call SYMBOL(MterpSetBooleanStatic)
testb %al, %al
jnz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sput_byte: /* 0x6b */
/* File: x86_64/op_sput_byte.S */
/* File: x86_64/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
.extern MterpSetByteStatic
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref BBBB
GET_VREG OUT_32_ARG1, rINSTq # fp[AA]
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3 # self
call SYMBOL(MterpSetByteStatic)
testb %al, %al
jnz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sput_char: /* 0x6c */
/* File: x86_64/op_sput_char.S */
/* File: x86_64/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
.extern MterpSetCharStatic
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref BBBB
GET_VREG OUT_32_ARG1, rINSTq # fp[AA]
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3 # self
call SYMBOL(MterpSetCharStatic)
testb %al, %al
jnz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sput_short: /* 0x6d */
/* File: x86_64/op_sput_short.S */
/* File: x86_64/op_sput.S */
/*
* General SPUT handler wrapper.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
.extern MterpSetShortStatic
EXPORT_PC
movzwq 2(rPC), OUT_ARG0 # field ref BBBB
GET_VREG OUT_32_ARG1, rINSTq # fp[AA]
movq OFF_FP_METHOD(rFP), OUT_ARG2 # referrer
movq rSELF, OUT_ARG3 # self
call SYMBOL(MterpSetShortStatic)
testb %al, %al
jnz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual: /* 0x6e */
/* File: x86_64/op_invoke_virtual.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtual
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 110
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeVirtual)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/*
* Handle a virtual method call.
*
* for: invoke-virtual, invoke-virtual/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
/* ------------------------------ */
.balign 128
.L_op_invoke_super: /* 0x6f */
/* File: x86_64/op_invoke_super.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeSuper
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 111
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeSuper)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/*
* Handle a "super" method call.
*
* for: invoke-super, invoke-super/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
/* ------------------------------ */
.balign 128
.L_op_invoke_direct: /* 0x70 */
/* File: x86_64/op_invoke_direct.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeDirect
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 112
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeDirect)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/* ------------------------------ */
.balign 128
.L_op_invoke_static: /* 0x71 */
/* File: x86_64/op_invoke_static.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeStatic
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 113
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeStatic)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/* ------------------------------ */
.balign 128
.L_op_invoke_interface: /* 0x72 */
/* File: x86_64/op_invoke_interface.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeInterface
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 114
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeInterface)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/*
* Handle an interface method call.
*
* for: invoke-interface, invoke-interface/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
/* ------------------------------ */
.balign 128
.L_op_return_void_no_barrier: /* 0x73 */
/* File: x86_64/op_return_void_no_barrier.S */
movq rSELF, OUT_ARG0
testl $(THREAD_SUSPEND_OR_CHECKPOINT_REQUEST), THREAD_FLAGS_OFFSET(OUT_ARG0)
jz 1f
call SYMBOL(MterpSuspendCheck)
1:
xorq %rax, %rax
jmp MterpReturn
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_range: /* 0x74 */
/* File: x86_64/op_invoke_virtual_range.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtualRange
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 116
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeVirtualRange)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/* ------------------------------ */
.balign 128
.L_op_invoke_super_range: /* 0x75 */
/* File: x86_64/op_invoke_super_range.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeSuperRange
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 117
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeSuperRange)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/* ------------------------------ */
.balign 128
.L_op_invoke_direct_range: /* 0x76 */
/* File: x86_64/op_invoke_direct_range.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeDirectRange
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 118
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeDirectRange)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/* ------------------------------ */
.balign 128
.L_op_invoke_static_range: /* 0x77 */
/* File: x86_64/op_invoke_static_range.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeStaticRange
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 119
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeStaticRange)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/* ------------------------------ */
.balign 128
.L_op_invoke_interface_range: /* 0x78 */
/* File: x86_64/op_invoke_interface_range.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeInterfaceRange
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 120
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeInterfaceRange)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/* ------------------------------ */
.balign 128
.L_op_unused_79: /* 0x79 */
/* File: x86_64/op_unused_79.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_7a: /* 0x7a */
/* File: x86_64/op_unused_7a.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_neg_int: /* 0x7b */
/* File: x86_64/op_neg_int.S */
/* File: x86_64/unop.S */
/*
* Generic 32/64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4,rINST # rINST <- B
.if 0
GET_WIDE_VREG %rax, rINSTq # rax <- vB
.else
GET_VREG %eax, rINSTq # eax <- vB
.endif
andb $0xf,%cl # ecx <- A
negl %eax
.if 0
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_not_int: /* 0x7c */
/* File: x86_64/op_not_int.S */
/* File: x86_64/unop.S */
/*
* Generic 32/64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4,rINST # rINST <- B
.if 0
GET_WIDE_VREG %rax, rINSTq # rax <- vB
.else
GET_VREG %eax, rINSTq # eax <- vB
.endif
andb $0xf,%cl # ecx <- A
notl %eax
.if 0
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_neg_long: /* 0x7d */
/* File: x86_64/op_neg_long.S */
/* File: x86_64/unop.S */
/*
* Generic 32/64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4,rINST # rINST <- B
.if 1
GET_WIDE_VREG %rax, rINSTq # rax <- vB
.else
GET_VREG %eax, rINSTq # eax <- vB
.endif
andb $0xf,%cl # ecx <- A
negq %rax
.if 1
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_not_long: /* 0x7e */
/* File: x86_64/op_not_long.S */
/* File: x86_64/unop.S */
/*
* Generic 32/64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4,rINST # rINST <- B
.if 1
GET_WIDE_VREG %rax, rINSTq # rax <- vB
.else
GET_VREG %eax, rINSTq # eax <- vB
.endif
andb $0xf,%cl # ecx <- A
notq %rax
.if 1
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_neg_float: /* 0x7f */
/* File: x86_64/op_neg_float.S */
/* File: x86_64/unop.S */
/*
* Generic 32/64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4,rINST # rINST <- B
.if 0
GET_WIDE_VREG %rax, rINSTq # rax <- vB
.else
GET_VREG %eax, rINSTq # eax <- vB
.endif
andb $0xf,%cl # ecx <- A
xorl $0x80000000, %eax
.if 0
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_neg_double: /* 0x80 */
/* File: x86_64/op_neg_double.S */
/* File: x86_64/unop.S */
/*
* Generic 32/64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4,rINST # rINST <- B
.if 1
GET_WIDE_VREG %rax, rINSTq # rax <- vB
.else
GET_VREG %eax, rINSTq # eax <- vB
.endif
andb $0xf,%cl # ecx <- A
movq $0x8000000000000000, %rsi
xorq %rsi, %rax
.if 1
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_int_to_long: /* 0x81 */
/* File: x86_64/op_int_to_long.S */
/* int to long vA, vB */
movzbq rINSTbl, %rax # rax <- +A
sarl $4, %eax # eax <- B
andb $0xf, rINSTbl # rINST <- A
movslq VREG_ADDRESS(%rax), %rax
SET_WIDE_VREG %rax, rINSTq # v[A] <- %rax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_int_to_float: /* 0x82 */
/* File: x86_64/op_int_to_float.S */
/* File: x86_64/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
cvtsi2ssl VREG_ADDRESS(rINSTq), %xmm0
.if 0
movsd %xmm0, VREG_ADDRESS(%rcx)
CLEAR_WIDE_REF %rcx
.else
movss %xmm0, VREG_ADDRESS(%rcx)
CLEAR_REF %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_int_to_double: /* 0x83 */
/* File: x86_64/op_int_to_double.S */
/* File: x86_64/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
cvtsi2sdl VREG_ADDRESS(rINSTq), %xmm0
.if 1
movsd %xmm0, VREG_ADDRESS(%rcx)
CLEAR_WIDE_REF %rcx
.else
movss %xmm0, VREG_ADDRESS(%rcx)
CLEAR_REF %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_long_to_int: /* 0x84 */
/* File: x86_64/op_long_to_int.S */
/* we ignore the high word, making this equivalent to a 32-bit reg move */
/* File: x86_64/op_move.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
movl rINST, %eax # eax <- BA
andb $0xf, %al # eax <- A
shrl $4, rINST # rINST <- B
GET_VREG %edx, rINSTq
.if 0
SET_VREG_OBJECT %edx, %rax # fp[A] <- fp[B]
.else
SET_VREG %edx, %rax # fp[A] <- fp[B]
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_long_to_float: /* 0x85 */
/* File: x86_64/op_long_to_float.S */
/* File: x86_64/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
cvtsi2ssq VREG_ADDRESS(rINSTq), %xmm0
.if 0
movsd %xmm0, VREG_ADDRESS(%rcx)
CLEAR_WIDE_REF %rcx
.else
movss %xmm0, VREG_ADDRESS(%rcx)
CLEAR_REF %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_long_to_double: /* 0x86 */
/* File: x86_64/op_long_to_double.S */
/* File: x86_64/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
cvtsi2sdq VREG_ADDRESS(rINSTq), %xmm0
.if 1
movsd %xmm0, VREG_ADDRESS(%rcx)
CLEAR_WIDE_REF %rcx
.else
movss %xmm0, VREG_ADDRESS(%rcx)
CLEAR_REF %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_float_to_int: /* 0x87 */
/* File: x86_64/op_float_to_int.S */
/* File: x86_64/cvtfp_int.S */
/* On fp to int conversions, Java requires that
* if the result > maxint, it should be clamped to maxint. If it is less
* than minint, it should be clamped to minint. If it is a nan, the result
* should be zero. Further, the rounding mode is to truncate.
*/
/* float/double to int/long vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
movss VREG_ADDRESS(rINSTq), %xmm0
movl $0x7fffffff, %eax
cvtsi2ssl %eax, %xmm1
comiss %xmm1, %xmm0
jae 1f
jp 2f
cvttss2sil %xmm0, %eax
jmp 1f
2:
xorl %eax, %eax
1:
.if 0
SET_WIDE_VREG %eax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_float_to_long: /* 0x88 */
/* File: x86_64/op_float_to_long.S */
/* File: x86_64/cvtfp_int.S */
/* On fp to int conversions, Java requires that
* if the result > maxint, it should be clamped to maxint. If it is less
* than minint, it should be clamped to minint. If it is a nan, the result
* should be zero. Further, the rounding mode is to truncate.
*/
/* float/double to int/long vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
movss VREG_ADDRESS(rINSTq), %xmm0
movq $0x7fffffffffffffff, %rax
cvtsi2ssq %rax, %xmm1
comiss %xmm1, %xmm0
jae 1f
jp 2f
cvttss2siq %xmm0, %rax
jmp 1f
2:
xorq %rax, %rax
1:
.if 1
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %rax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_float_to_double: /* 0x89 */
/* File: x86_64/op_float_to_double.S */
/* File: x86_64/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
cvtss2sd VREG_ADDRESS(rINSTq), %xmm0
.if 1
movsd %xmm0, VREG_ADDRESS(%rcx)
CLEAR_WIDE_REF %rcx
.else
movss %xmm0, VREG_ADDRESS(%rcx)
CLEAR_REF %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_double_to_int: /* 0x8a */
/* File: x86_64/op_double_to_int.S */
/* File: x86_64/cvtfp_int.S */
/* On fp to int conversions, Java requires that
* if the result > maxint, it should be clamped to maxint. If it is less
* than minint, it should be clamped to minint. If it is a nan, the result
* should be zero. Further, the rounding mode is to truncate.
*/
/* float/double to int/long vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
movsd VREG_ADDRESS(rINSTq), %xmm0
movl $0x7fffffff, %eax
cvtsi2sdl %eax, %xmm1
comisd %xmm1, %xmm0
jae 1f
jp 2f
cvttsd2sil %xmm0, %eax
jmp 1f
2:
xorl %eax, %eax
1:
.if 0
SET_WIDE_VREG %eax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_double_to_long: /* 0x8b */
/* File: x86_64/op_double_to_long.S */
/* File: x86_64/cvtfp_int.S */
/* On fp to int conversions, Java requires that
* if the result > maxint, it should be clamped to maxint. If it is less
* than minint, it should be clamped to minint. If it is a nan, the result
* should be zero. Further, the rounding mode is to truncate.
*/
/* float/double to int/long vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
movsd VREG_ADDRESS(rINSTq), %xmm0
movq $0x7fffffffffffffff, %rax
cvtsi2sdq %rax, %xmm1
comisd %xmm1, %xmm0
jae 1f
jp 2f
cvttsd2siq %xmm0, %rax
jmp 1f
2:
xorq %rax, %rax
1:
.if 1
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %rax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_double_to_float: /* 0x8c */
/* File: x86_64/op_double_to_float.S */
/* File: x86_64/fpcvt.S */
/*
* Generic 32-bit FP conversion operation.
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
cvtsd2ss VREG_ADDRESS(rINSTq), %xmm0
.if 0
movsd %xmm0, VREG_ADDRESS(%rcx)
CLEAR_WIDE_REF %rcx
.else
movss %xmm0, VREG_ADDRESS(%rcx)
CLEAR_REF %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_int_to_byte: /* 0x8d */
/* File: x86_64/op_int_to_byte.S */
/* File: x86_64/unop.S */
/*
* Generic 32/64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4,rINST # rINST <- B
.if 0
GET_WIDE_VREG %rax, rINSTq # rax <- vB
.else
GET_VREG %eax, rINSTq # eax <- vB
.endif
andb $0xf,%cl # ecx <- A
movsbl %al, %eax
.if 0
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_int_to_char: /* 0x8e */
/* File: x86_64/op_int_to_char.S */
/* File: x86_64/unop.S */
/*
* Generic 32/64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4,rINST # rINST <- B
.if 0
GET_WIDE_VREG %rax, rINSTq # rax <- vB
.else
GET_VREG %eax, rINSTq # eax <- vB
.endif
andb $0xf,%cl # ecx <- A
movzwl %ax,%eax
.if 0
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_int_to_short: /* 0x8f */
/* File: x86_64/op_int_to_short.S */
/* File: x86_64/unop.S */
/*
* Generic 32/64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op eax".
*/
/* unop vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4,rINST # rINST <- B
.if 0
GET_WIDE_VREG %rax, rINSTq # rax <- vB
.else
GET_VREG %eax, rINSTq # eax <- vB
.endif
andb $0xf,%cl # ecx <- A
movswl %ax, %eax
.if 0
SET_WIDE_VREG %rax, %rcx
.else
SET_VREG %eax, %rcx
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_add_int: /* 0x90 */
/* File: x86_64/op_add_int.S */
/* File: x86_64/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB
addl (rFP,%rcx,4), %eax # ex: addl (rFP,%rcx,4),%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sub_int: /* 0x91 */
/* File: x86_64/op_sub_int.S */
/* File: x86_64/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB
subl (rFP,%rcx,4), %eax # ex: addl (rFP,%rcx,4),%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_mul_int: /* 0x92 */
/* File: x86_64/op_mul_int.S */
/* File: x86_64/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB
imull (rFP,%rcx,4), %eax # ex: addl (rFP,%rcx,4),%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_div_int: /* 0x93 */
/* File: x86_64/op_div_int.S */
/* File: x86_64/bindiv.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
.if 0
GET_WIDE_VREG %rax, %rax # eax <- vBB
GET_WIDE_VREG %ecx, %rcx # ecx <- vCC
.else
GET_VREG %eax, %rax # eax <- vBB
GET_VREG %ecx, %rcx # ecx <- vCC
.endif
testl %ecx, %ecx
jz common_errDivideByZero
cmpl $-1, %ecx
je 2f
cdq # rdx:rax <- sign-extended of rax
idivl %ecx
1:
.if 0
SET_WIDE_VREG %eax, rINSTq # eax <- vBB
.else
SET_VREG %eax, rINSTq # eax <- vBB
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
2:
.if 0
xorl %eax, %eax
.else
negl %eax
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_rem_int: /* 0x94 */
/* File: x86_64/op_rem_int.S */
/* File: x86_64/bindiv.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
.if 0
GET_WIDE_VREG %rax, %rax # eax <- vBB
GET_WIDE_VREG %ecx, %rcx # ecx <- vCC
.else
GET_VREG %eax, %rax # eax <- vBB
GET_VREG %ecx, %rcx # ecx <- vCC
.endif
testl %ecx, %ecx
jz common_errDivideByZero
cmpl $-1, %ecx
je 2f
cdq # rdx:rax <- sign-extended of rax
idivl %ecx
1:
.if 0
SET_WIDE_VREG %edx, rINSTq # eax <- vBB
.else
SET_VREG %edx, rINSTq # eax <- vBB
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
2:
.if 1
xorl %edx, %edx
.else
negl %edx
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_and_int: /* 0x95 */
/* File: x86_64/op_and_int.S */
/* File: x86_64/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB
andl (rFP,%rcx,4), %eax # ex: addl (rFP,%rcx,4),%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_or_int: /* 0x96 */
/* File: x86_64/op_or_int.S */
/* File: x86_64/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB
orl (rFP,%rcx,4), %eax # ex: addl (rFP,%rcx,4),%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_xor_int: /* 0x97 */
/* File: x86_64/op_xor_int.S */
/* File: x86_64/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = eax op (rFP,%ecx,4)".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int, sub-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
GET_VREG %eax, %rax # eax <- vBB
xorl (rFP,%rcx,4), %eax # ex: addl (rFP,%rcx,4),%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_shl_int: /* 0x98 */
/* File: x86_64/op_shl_int.S */
/* File: x86_64/binop1.S */
/*
* Generic 32-bit binary operation in which both operands loaded to
* registers (op0 in eax, op1 in ecx).
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %ecx, %rcx # eax <- vCC
.if 0
GET_WIDE_VREG %rax, %rax # rax <- vBB
sall %cl, %eax # ex: addl %ecx,%eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, %rax # eax <- vBB
sall %cl, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_shr_int: /* 0x99 */
/* File: x86_64/op_shr_int.S */
/* File: x86_64/binop1.S */
/*
* Generic 32-bit binary operation in which both operands loaded to
* registers (op0 in eax, op1 in ecx).
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %ecx, %rcx # eax <- vCC
.if 0
GET_WIDE_VREG %rax, %rax # rax <- vBB
sarl %cl, %eax # ex: addl %ecx,%eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, %rax # eax <- vBB
sarl %cl, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_ushr_int: /* 0x9a */
/* File: x86_64/op_ushr_int.S */
/* File: x86_64/binop1.S */
/*
* Generic 32-bit binary operation in which both operands loaded to
* registers (op0 in eax, op1 in ecx).
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %ecx, %rcx # eax <- vCC
.if 0
GET_WIDE_VREG %rax, %rax # rax <- vBB
shrl %cl, %eax # ex: addl %ecx,%eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, %rax # eax <- vBB
shrl %cl, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_add_long: /* 0x9b */
/* File: x86_64/op_add_long.S */
/* File: x86_64/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_WIDE_VREG %rax, %rax # rax <- v[BB]
addq (rFP,%rcx,4), %rax # ex: addq (rFP,%rcx,4),%rax
SET_WIDE_VREG %rax, rINSTq # v[AA] <- rax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sub_long: /* 0x9c */
/* File: x86_64/op_sub_long.S */
/* File: x86_64/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_WIDE_VREG %rax, %rax # rax <- v[BB]
subq (rFP,%rcx,4), %rax # ex: addq (rFP,%rcx,4),%rax
SET_WIDE_VREG %rax, rINSTq # v[AA] <- rax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_mul_long: /* 0x9d */
/* File: x86_64/op_mul_long.S */
/* File: x86_64/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_WIDE_VREG %rax, %rax # rax <- v[BB]
imulq (rFP,%rcx,4), %rax # ex: addq (rFP,%rcx,4),%rax
SET_WIDE_VREG %rax, rINSTq # v[AA] <- rax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_div_long: /* 0x9e */
/* File: x86_64/op_div_long.S */
/* File: x86_64/bindiv.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
.if 1
GET_WIDE_VREG %rax, %rax # eax <- vBB
GET_WIDE_VREG %rcx, %rcx # ecx <- vCC
.else
GET_VREG %eax, %rax # eax <- vBB
GET_VREG %rcx, %rcx # ecx <- vCC
.endif
testq %rcx, %rcx
jz common_errDivideByZero
cmpq $-1, %rcx
je 2f
cqo # rdx:rax <- sign-extended of rax
idivq %rcx
1:
.if 1
SET_WIDE_VREG %rax, rINSTq # eax <- vBB
.else
SET_VREG %rax, rINSTq # eax <- vBB
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
2:
.if 0
xorq %rax, %rax
.else
negq %rax
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_rem_long: /* 0x9f */
/* File: x86_64/op_rem_long.S */
/* File: x86_64/bindiv.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem vAA, vBB, vCC */
movzbq 2(rPC), %rax # rax <- BB
movzbq 3(rPC), %rcx # rcx <- CC
.if 1
GET_WIDE_VREG %rax, %rax # eax <- vBB
GET_WIDE_VREG %rcx, %rcx # ecx <- vCC
.else
GET_VREG %eax, %rax # eax <- vBB
GET_VREG %rcx, %rcx # ecx <- vCC
.endif
testq %rcx, %rcx
jz common_errDivideByZero
cmpq $-1, %rcx
je 2f
cqo # rdx:rax <- sign-extended of rax
idivq %rcx
1:
.if 1
SET_WIDE_VREG %rdx, rINSTq # eax <- vBB
.else
SET_VREG %rdx, rINSTq # eax <- vBB
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
2:
.if 1
xorq %rdx, %rdx
.else
negq %rdx
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_and_long: /* 0xa0 */
/* File: x86_64/op_and_long.S */
/* File: x86_64/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_WIDE_VREG %rax, %rax # rax <- v[BB]
andq (rFP,%rcx,4), %rax # ex: addq (rFP,%rcx,4),%rax
SET_WIDE_VREG %rax, rINSTq # v[AA] <- rax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_or_long: /* 0xa1 */
/* File: x86_64/op_or_long.S */
/* File: x86_64/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_WIDE_VREG %rax, %rax # rax <- v[BB]
orq (rFP,%rcx,4), %rax # ex: addq (rFP,%rcx,4),%rax
SET_WIDE_VREG %rax, rINSTq # v[AA] <- rax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_xor_long: /* 0xa2 */
/* File: x86_64/op_xor_long.S */
/* File: x86_64/binopWide.S */
/*
* Generic 64-bit binary operation.
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_WIDE_VREG %rax, %rax # rax <- v[BB]
xorq (rFP,%rcx,4), %rax # ex: addq (rFP,%rcx,4),%rax
SET_WIDE_VREG %rax, rINSTq # v[AA] <- rax
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_shl_long: /* 0xa3 */
/* File: x86_64/op_shl_long.S */
/* File: x86_64/binop1.S */
/*
* Generic 32-bit binary operation in which both operands loaded to
* registers (op0 in eax, op1 in ecx).
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %ecx, %rcx # eax <- vCC
.if 1
GET_WIDE_VREG %rax, %rax # rax <- vBB
salq %cl, %rax # ex: addl %ecx,%eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, %rax # eax <- vBB
salq %cl, %rax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_shr_long: /* 0xa4 */
/* File: x86_64/op_shr_long.S */
/* File: x86_64/binop1.S */
/*
* Generic 32-bit binary operation in which both operands loaded to
* registers (op0 in eax, op1 in ecx).
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %ecx, %rcx # eax <- vCC
.if 1
GET_WIDE_VREG %rax, %rax # rax <- vBB
sarq %cl, %rax # ex: addl %ecx,%eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, %rax # eax <- vBB
sarq %cl, %rax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_ushr_long: /* 0xa5 */
/* File: x86_64/op_ushr_long.S */
/* File: x86_64/binop1.S */
/*
* Generic 32-bit binary operation in which both operands loaded to
* registers (op0 in eax, op1 in ecx).
*/
/* binop vAA, vBB, vCC */
movzbq 2(rPC), %rax # eax <- BB
movzbq 3(rPC), %rcx # ecx <- CC
GET_VREG %ecx, %rcx # eax <- vCC
.if 1
GET_WIDE_VREG %rax, %rax # rax <- vBB
shrq %cl, %rax # ex: addl %ecx,%eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, %rax # eax <- vBB
shrq %cl, %rax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_add_float: /* 0xa6 */
/* File: x86_64/op_add_float.S */
/* File: x86_64/sseBinop.S */
movzbq 2(rPC), %rcx # ecx <- BB
movzbq 3(rPC), %rax # eax <- CC
movss VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
addss VREG_ADDRESS(%rax), %xmm0
movss %xmm0, VREG_ADDRESS(rINSTq) # vAA <- %xmm0
pxor %xmm0, %xmm0
movss %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sub_float: /* 0xa7 */
/* File: x86_64/op_sub_float.S */
/* File: x86_64/sseBinop.S */
movzbq 2(rPC), %rcx # ecx <- BB
movzbq 3(rPC), %rax # eax <- CC
movss VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
subss VREG_ADDRESS(%rax), %xmm0
movss %xmm0, VREG_ADDRESS(rINSTq) # vAA <- %xmm0
pxor %xmm0, %xmm0
movss %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_mul_float: /* 0xa8 */
/* File: x86_64/op_mul_float.S */
/* File: x86_64/sseBinop.S */
movzbq 2(rPC), %rcx # ecx <- BB
movzbq 3(rPC), %rax # eax <- CC
movss VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
mulss VREG_ADDRESS(%rax), %xmm0
movss %xmm0, VREG_ADDRESS(rINSTq) # vAA <- %xmm0
pxor %xmm0, %xmm0
movss %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_div_float: /* 0xa9 */
/* File: x86_64/op_div_float.S */
/* File: x86_64/sseBinop.S */
movzbq 2(rPC), %rcx # ecx <- BB
movzbq 3(rPC), %rax # eax <- CC
movss VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
divss VREG_ADDRESS(%rax), %xmm0
movss %xmm0, VREG_ADDRESS(rINSTq) # vAA <- %xmm0
pxor %xmm0, %xmm0
movss %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_rem_float: /* 0xaa */
/* File: x86_64/op_rem_float.S */
/* rem_float vAA, vBB, vCC */
movzbq 3(rPC), %rcx # ecx <- BB
movzbq 2(rPC), %rax # eax <- CC
flds VREG_ADDRESS(%rcx) # vBB to fp stack
flds VREG_ADDRESS(%rax) # vCC to fp stack
1:
fprem
fstsw %ax
sahf
jp 1b
fstp %st(1)
fstps VREG_ADDRESS(rINSTq) # %st to vAA
CLEAR_REF rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_add_double: /* 0xab */
/* File: x86_64/op_add_double.S */
/* File: x86_64/sseBinop.S */
movzbq 2(rPC), %rcx # ecx <- BB
movzbq 3(rPC), %rax # eax <- CC
movsd VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
addsd VREG_ADDRESS(%rax), %xmm0
movsd %xmm0, VREG_ADDRESS(rINSTq) # vAA <- %xmm0
pxor %xmm0, %xmm0
movsd %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_sub_double: /* 0xac */
/* File: x86_64/op_sub_double.S */
/* File: x86_64/sseBinop.S */
movzbq 2(rPC), %rcx # ecx <- BB
movzbq 3(rPC), %rax # eax <- CC
movsd VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
subsd VREG_ADDRESS(%rax), %xmm0
movsd %xmm0, VREG_ADDRESS(rINSTq) # vAA <- %xmm0
pxor %xmm0, %xmm0
movsd %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_mul_double: /* 0xad */
/* File: x86_64/op_mul_double.S */
/* File: x86_64/sseBinop.S */
movzbq 2(rPC), %rcx # ecx <- BB
movzbq 3(rPC), %rax # eax <- CC
movsd VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
mulsd VREG_ADDRESS(%rax), %xmm0
movsd %xmm0, VREG_ADDRESS(rINSTq) # vAA <- %xmm0
pxor %xmm0, %xmm0
movsd %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_div_double: /* 0xae */
/* File: x86_64/op_div_double.S */
/* File: x86_64/sseBinop.S */
movzbq 2(rPC), %rcx # ecx <- BB
movzbq 3(rPC), %rax # eax <- CC
movsd VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
divsd VREG_ADDRESS(%rax), %xmm0
movsd %xmm0, VREG_ADDRESS(rINSTq) # vAA <- %xmm0
pxor %xmm0, %xmm0
movsd %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_rem_double: /* 0xaf */
/* File: x86_64/op_rem_double.S */
/* rem_double vAA, vBB, vCC */
movzbq 3(rPC), %rcx # ecx <- BB
movzbq 2(rPC), %rax # eax <- CC
fldl VREG_ADDRESS(%rcx) # %st1 <- fp[vBB]
fldl VREG_ADDRESS(%rax) # %st0 <- fp[vCC]
1:
fprem
fstsw %ax
sahf
jp 1b
fstp %st(1)
fstpl VREG_ADDRESS(rINSTq) # fp[vAA] <- %st
CLEAR_WIDE_REF rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_add_int_2addr: /* 0xb0 */
/* File: x86_64/op_add_int_2addr.S */
/* File: x86_64/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an instruction or a function call.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_VREG %eax, rINSTq # eax <- vB
addl %eax, (rFP,%rcx,4) # for ex: addl %eax,(rFP,%ecx,4)
CLEAR_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_sub_int_2addr: /* 0xb1 */
/* File: x86_64/op_sub_int_2addr.S */
/* File: x86_64/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an instruction or a function call.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_VREG %eax, rINSTq # eax <- vB
subl %eax, (rFP,%rcx,4) # for ex: addl %eax,(rFP,%ecx,4)
CLEAR_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_mul_int_2addr: /* 0xb2 */
/* File: x86_64/op_mul_int_2addr.S */
/* mul vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_VREG %eax, %rcx # eax <- vA
imull (rFP,rINSTq,4), %eax
SET_VREG %eax, %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_div_int_2addr: /* 0xb3 */
/* File: x86_64/op_div_int_2addr.S */
/* File: x86_64/bindiv2addr.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem/2addr vA, vB */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # rcx <- B
andb $0xf, rINSTbl # rINST <- A
.if 0
GET_WIDE_VREG %rax, rINSTq # eax <- vA
GET_WIDE_VREG %ecx, %rcx # ecx <- vB
.else
GET_VREG %eax, rINSTq # eax <- vA
GET_VREG %ecx, %rcx # ecx <- vB
.endif
testl %ecx, %ecx
jz common_errDivideByZero
cmpl $-1, %ecx
je 2f
cdq # rdx:rax <- sign-extended of rax
idivl %ecx
1:
.if 0
SET_WIDE_VREG %eax, rINSTq # vA <- result
.else
SET_VREG %eax, rINSTq # vA <- result
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
2:
.if 0
xorl %eax, %eax
.else
negl %eax
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_rem_int_2addr: /* 0xb4 */
/* File: x86_64/op_rem_int_2addr.S */
/* File: x86_64/bindiv2addr.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem/2addr vA, vB */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # rcx <- B
andb $0xf, rINSTbl # rINST <- A
.if 0
GET_WIDE_VREG %rax, rINSTq # eax <- vA
GET_WIDE_VREG %ecx, %rcx # ecx <- vB
.else
GET_VREG %eax, rINSTq # eax <- vA
GET_VREG %ecx, %rcx # ecx <- vB
.endif
testl %ecx, %ecx
jz common_errDivideByZero
cmpl $-1, %ecx
je 2f
cdq # rdx:rax <- sign-extended of rax
idivl %ecx
1:
.if 0
SET_WIDE_VREG %edx, rINSTq # vA <- result
.else
SET_VREG %edx, rINSTq # vA <- result
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
2:
.if 1
xorl %edx, %edx
.else
negl %edx
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_and_int_2addr: /* 0xb5 */
/* File: x86_64/op_and_int_2addr.S */
/* File: x86_64/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an instruction or a function call.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_VREG %eax, rINSTq # eax <- vB
andl %eax, (rFP,%rcx,4) # for ex: addl %eax,(rFP,%ecx,4)
CLEAR_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_or_int_2addr: /* 0xb6 */
/* File: x86_64/op_or_int_2addr.S */
/* File: x86_64/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an instruction or a function call.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_VREG %eax, rINSTq # eax <- vB
orl %eax, (rFP,%rcx,4) # for ex: addl %eax,(rFP,%ecx,4)
CLEAR_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_xor_int_2addr: /* 0xb7 */
/* File: x86_64/op_xor_int_2addr.S */
/* File: x86_64/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an instruction or a function call.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_VREG %eax, rINSTq # eax <- vB
xorl %eax, (rFP,%rcx,4) # for ex: addl %eax,(rFP,%ecx,4)
CLEAR_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_shl_int_2addr: /* 0xb8 */
/* File: x86_64/op_shl_int_2addr.S */
/* File: x86_64/shop2addr.S */
/*
* Generic 32-bit "shift/2addr" operation.
*/
/* shift/2addr vA, vB */
movl rINST, %ecx # ecx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # ecx <- vBB
andb $0xf, rINSTbl # rINST <- A
.if 0
GET_WIDE_VREG %rax, rINSTq # rax <- vAA
sall %cl, %eax # ex: sarl %cl, %eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, rINSTq # eax <- vAA
sall %cl, %eax # ex: sarl %cl, %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_shr_int_2addr: /* 0xb9 */
/* File: x86_64/op_shr_int_2addr.S */
/* File: x86_64/shop2addr.S */
/*
* Generic 32-bit "shift/2addr" operation.
*/
/* shift/2addr vA, vB */
movl rINST, %ecx # ecx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # ecx <- vBB
andb $0xf, rINSTbl # rINST <- A
.if 0
GET_WIDE_VREG %rax, rINSTq # rax <- vAA
sarl %cl, %eax # ex: sarl %cl, %eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, rINSTq # eax <- vAA
sarl %cl, %eax # ex: sarl %cl, %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_ushr_int_2addr: /* 0xba */
/* File: x86_64/op_ushr_int_2addr.S */
/* File: x86_64/shop2addr.S */
/*
* Generic 32-bit "shift/2addr" operation.
*/
/* shift/2addr vA, vB */
movl rINST, %ecx # ecx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # ecx <- vBB
andb $0xf, rINSTbl # rINST <- A
.if 0
GET_WIDE_VREG %rax, rINSTq # rax <- vAA
shrl %cl, %eax # ex: sarl %cl, %eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, rINSTq # eax <- vAA
shrl %cl, %eax # ex: sarl %cl, %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_add_long_2addr: /* 0xbb */
/* File: x86_64/op_add_long_2addr.S */
/* File: x86_64/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_WIDE_VREG %rax, rINSTq # rax <- vB
addq %rax, (rFP,%rcx,4) # for ex: addq %rax,(rFP,%rcx,4)
CLEAR_WIDE_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_sub_long_2addr: /* 0xbc */
/* File: x86_64/op_sub_long_2addr.S */
/* File: x86_64/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_WIDE_VREG %rax, rINSTq # rax <- vB
subq %rax, (rFP,%rcx,4) # for ex: addq %rax,(rFP,%rcx,4)
CLEAR_WIDE_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_mul_long_2addr: /* 0xbd */
/* File: x86_64/op_mul_long_2addr.S */
/* mul vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_WIDE_VREG %rax, %rcx # rax <- vA
imulq (rFP,rINSTq,4), %rax
SET_WIDE_VREG %rax, %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_div_long_2addr: /* 0xbe */
/* File: x86_64/op_div_long_2addr.S */
/* File: x86_64/bindiv2addr.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem/2addr vA, vB */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # rcx <- B
andb $0xf, rINSTbl # rINST <- A
.if 1
GET_WIDE_VREG %rax, rINSTq # eax <- vA
GET_WIDE_VREG %rcx, %rcx # ecx <- vB
.else
GET_VREG %eax, rINSTq # eax <- vA
GET_VREG %rcx, %rcx # ecx <- vB
.endif
testq %rcx, %rcx
jz common_errDivideByZero
cmpq $-1, %rcx
je 2f
cqo # rdx:rax <- sign-extended of rax
idivq %rcx
1:
.if 1
SET_WIDE_VREG %rax, rINSTq # vA <- result
.else
SET_VREG %rax, rINSTq # vA <- result
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
2:
.if 0
xorq %rax, %rax
.else
negq %rax
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_rem_long_2addr: /* 0xbf */
/* File: x86_64/op_rem_long_2addr.S */
/* File: x86_64/bindiv2addr.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem/2addr vA, vB */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # rcx <- B
andb $0xf, rINSTbl # rINST <- A
.if 1
GET_WIDE_VREG %rax, rINSTq # eax <- vA
GET_WIDE_VREG %rcx, %rcx # ecx <- vB
.else
GET_VREG %eax, rINSTq # eax <- vA
GET_VREG %rcx, %rcx # ecx <- vB
.endif
testq %rcx, %rcx
jz common_errDivideByZero
cmpq $-1, %rcx
je 2f
cqo # rdx:rax <- sign-extended of rax
idivq %rcx
1:
.if 1
SET_WIDE_VREG %rdx, rINSTq # vA <- result
.else
SET_VREG %rdx, rINSTq # vA <- result
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
2:
.if 1
xorq %rdx, %rdx
.else
negq %rdx
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_and_long_2addr: /* 0xc0 */
/* File: x86_64/op_and_long_2addr.S */
/* File: x86_64/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_WIDE_VREG %rax, rINSTq # rax <- vB
andq %rax, (rFP,%rcx,4) # for ex: addq %rax,(rFP,%rcx,4)
CLEAR_WIDE_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_or_long_2addr: /* 0xc1 */
/* File: x86_64/op_or_long_2addr.S */
/* File: x86_64/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_WIDE_VREG %rax, rINSTq # rax <- vB
orq %rax, (rFP,%rcx,4) # for ex: addq %rax,(rFP,%rcx,4)
CLEAR_WIDE_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_xor_long_2addr: /* 0xc2 */
/* File: x86_64/op_xor_long_2addr.S */
/* File: x86_64/binopWide2addr.S */
/*
* Generic 64-bit binary operation.
*/
/* binop/2addr vA, vB */
movl rINST, %ecx # rcx <- A+
sarl $4, rINST # rINST <- B
andb $0xf, %cl # ecx <- A
GET_WIDE_VREG %rax, rINSTq # rax <- vB
xorq %rax, (rFP,%rcx,4) # for ex: addq %rax,(rFP,%rcx,4)
CLEAR_WIDE_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_shl_long_2addr: /* 0xc3 */
/* File: x86_64/op_shl_long_2addr.S */
/* File: x86_64/shop2addr.S */
/*
* Generic 32-bit "shift/2addr" operation.
*/
/* shift/2addr vA, vB */
movl rINST, %ecx # ecx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # ecx <- vBB
andb $0xf, rINSTbl # rINST <- A
.if 1
GET_WIDE_VREG %rax, rINSTq # rax <- vAA
salq %cl, %rax # ex: sarl %cl, %eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, rINSTq # eax <- vAA
salq %cl, %rax # ex: sarl %cl, %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_shr_long_2addr: /* 0xc4 */
/* File: x86_64/op_shr_long_2addr.S */
/* File: x86_64/shop2addr.S */
/*
* Generic 32-bit "shift/2addr" operation.
*/
/* shift/2addr vA, vB */
movl rINST, %ecx # ecx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # ecx <- vBB
andb $0xf, rINSTbl # rINST <- A
.if 1
GET_WIDE_VREG %rax, rINSTq # rax <- vAA
sarq %cl, %rax # ex: sarl %cl, %eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, rINSTq # eax <- vAA
sarq %cl, %rax # ex: sarl %cl, %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_ushr_long_2addr: /* 0xc5 */
/* File: x86_64/op_ushr_long_2addr.S */
/* File: x86_64/shop2addr.S */
/*
* Generic 32-bit "shift/2addr" operation.
*/
/* shift/2addr vA, vB */
movl rINST, %ecx # ecx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # ecx <- vBB
andb $0xf, rINSTbl # rINST <- A
.if 1
GET_WIDE_VREG %rax, rINSTq # rax <- vAA
shrq %cl, %rax # ex: sarl %cl, %eax
SET_WIDE_VREG %rax, rINSTq
.else
GET_VREG %eax, rINSTq # eax <- vAA
shrq %cl, %rax # ex: sarl %cl, %eax
SET_VREG %eax, rINSTq
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_add_float_2addr: /* 0xc6 */
/* File: x86_64/op_add_float_2addr.S */
/* File: x86_64/sseBinop2Addr.S */
movl rINST, %ecx # ecx <- A+
andl $0xf, %ecx # ecx <- A
movss VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
sarl $4, rINST # rINST<- B
addss VREG_ADDRESS(rINSTq), %xmm0
movss %xmm0, VREG_ADDRESS(%rcx) # vAA<- %xmm0
pxor %xmm0, %xmm0
movss %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_sub_float_2addr: /* 0xc7 */
/* File: x86_64/op_sub_float_2addr.S */
/* File: x86_64/sseBinop2Addr.S */
movl rINST, %ecx # ecx <- A+
andl $0xf, %ecx # ecx <- A
movss VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
sarl $4, rINST # rINST<- B
subss VREG_ADDRESS(rINSTq), %xmm0
movss %xmm0, VREG_ADDRESS(%rcx) # vAA<- %xmm0
pxor %xmm0, %xmm0
movss %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_mul_float_2addr: /* 0xc8 */
/* File: x86_64/op_mul_float_2addr.S */
/* File: x86_64/sseBinop2Addr.S */
movl rINST, %ecx # ecx <- A+
andl $0xf, %ecx # ecx <- A
movss VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
sarl $4, rINST # rINST<- B
mulss VREG_ADDRESS(rINSTq), %xmm0
movss %xmm0, VREG_ADDRESS(%rcx) # vAA<- %xmm0
pxor %xmm0, %xmm0
movss %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_div_float_2addr: /* 0xc9 */
/* File: x86_64/op_div_float_2addr.S */
/* File: x86_64/sseBinop2Addr.S */
movl rINST, %ecx # ecx <- A+
andl $0xf, %ecx # ecx <- A
movss VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
sarl $4, rINST # rINST<- B
divss VREG_ADDRESS(rINSTq), %xmm0
movss %xmm0, VREG_ADDRESS(%rcx) # vAA<- %xmm0
pxor %xmm0, %xmm0
movss %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_rem_float_2addr: /* 0xca */
/* File: x86_64/op_rem_float_2addr.S */
/* rem_float/2addr vA, vB */
movzbq rINSTbl, %rcx # ecx <- A+
sarl $4, rINST # rINST <- B
flds VREG_ADDRESS(rINSTq) # vB to fp stack
andb $0xf, %cl # ecx <- A
flds VREG_ADDRESS(%rcx) # vA to fp stack
1:
fprem
fstsw %ax
sahf
jp 1b
fstp %st(1)
fstps VREG_ADDRESS(%rcx) # %st to vA
CLEAR_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_add_double_2addr: /* 0xcb */
/* File: x86_64/op_add_double_2addr.S */
/* File: x86_64/sseBinop2Addr.S */
movl rINST, %ecx # ecx <- A+
andl $0xf, %ecx # ecx <- A
movsd VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
sarl $4, rINST # rINST<- B
addsd VREG_ADDRESS(rINSTq), %xmm0
movsd %xmm0, VREG_ADDRESS(%rcx) # vAA<- %xmm0
pxor %xmm0, %xmm0
movsd %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_sub_double_2addr: /* 0xcc */
/* File: x86_64/op_sub_double_2addr.S */
/* File: x86_64/sseBinop2Addr.S */
movl rINST, %ecx # ecx <- A+
andl $0xf, %ecx # ecx <- A
movsd VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
sarl $4, rINST # rINST<- B
subsd VREG_ADDRESS(rINSTq), %xmm0
movsd %xmm0, VREG_ADDRESS(%rcx) # vAA<- %xmm0
pxor %xmm0, %xmm0
movsd %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_mul_double_2addr: /* 0xcd */
/* File: x86_64/op_mul_double_2addr.S */
/* File: x86_64/sseBinop2Addr.S */
movl rINST, %ecx # ecx <- A+
andl $0xf, %ecx # ecx <- A
movsd VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
sarl $4, rINST # rINST<- B
mulsd VREG_ADDRESS(rINSTq), %xmm0
movsd %xmm0, VREG_ADDRESS(%rcx) # vAA<- %xmm0
pxor %xmm0, %xmm0
movsd %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_div_double_2addr: /* 0xce */
/* File: x86_64/op_div_double_2addr.S */
/* File: x86_64/sseBinop2Addr.S */
movl rINST, %ecx # ecx <- A+
andl $0xf, %ecx # ecx <- A
movsd VREG_ADDRESS(%rcx), %xmm0 # %xmm0 <- 1st src
sarl $4, rINST # rINST<- B
divsd VREG_ADDRESS(rINSTq), %xmm0
movsd %xmm0, VREG_ADDRESS(%rcx) # vAA<- %xmm0
pxor %xmm0, %xmm0
movsd %xmm0, VREG_REF_ADDRESS(rINSTq) # clear ref
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_rem_double_2addr: /* 0xcf */
/* File: x86_64/op_rem_double_2addr.S */
/* rem_double/2addr vA, vB */
movzbq rINSTbl, %rcx # ecx <- A+
sarl $4, rINST # rINST <- B
fldl VREG_ADDRESS(rINSTq) # vB to fp stack
andb $0xf, %cl # ecx <- A
fldl VREG_ADDRESS(%rcx) # vA to fp stack
1:
fprem
fstsw %ax
sahf
jp 1b
fstp %st(1)
fstpl VREG_ADDRESS(%rcx) # %st to vA
CLEAR_WIDE_REF %rcx
ADVANCE_PC_FETCH_AND_GOTO_NEXT 1
/* ------------------------------ */
.balign 128
.L_op_add_int_lit16: /* 0xd0 */
/* File: x86_64/op_add_int_lit16.S */
/* File: x86_64/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movl rINST, %eax # rax <- 000000BA
sarl $4, %eax # eax <- B
GET_VREG %eax, %rax # eax <- vB
andb $0xf, rINSTbl # rINST <- A
movswl 2(rPC), %ecx # ecx <- ssssCCCC
addl %ecx, %eax # for example: addl %ecx, %eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_rsub_int: /* 0xd1 */
/* File: x86_64/op_rsub_int.S */
/* this op is "rsub-int", but can be thought of as "rsub-int/lit16" */
/* File: x86_64/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movl rINST, %eax # rax <- 000000BA
sarl $4, %eax # eax <- B
GET_VREG %eax, %rax # eax <- vB
andb $0xf, rINSTbl # rINST <- A
movswl 2(rPC), %ecx # ecx <- ssssCCCC
subl %eax, %ecx # for example: addl %ecx, %eax
SET_VREG %ecx, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_mul_int_lit16: /* 0xd2 */
/* File: x86_64/op_mul_int_lit16.S */
/* File: x86_64/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movl rINST, %eax # rax <- 000000BA
sarl $4, %eax # eax <- B
GET_VREG %eax, %rax # eax <- vB
andb $0xf, rINSTbl # rINST <- A
movswl 2(rPC), %ecx # ecx <- ssssCCCC
imull %ecx, %eax # for example: addl %ecx, %eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_div_int_lit16: /* 0xd3 */
/* File: x86_64/op_div_int_lit16.S */
/* File: x86_64/bindivLit16.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem/lit16 vA, vB, #+CCCC */
/* Need A in rINST, ssssCCCC in ecx, vB in eax */
movl rINST, %eax # rax <- 000000BA
sarl $4, %eax # eax <- B
GET_VREG %eax, %rax # eax <- vB
movswl 2(rPC), %ecx # ecx <- ssssCCCC
andb $0xf, rINSTbl # rINST <- A
testl %ecx, %ecx
jz common_errDivideByZero
cmpl $-1, %ecx
je 2f
cdq # rax <- sign-extended of eax
idivl %ecx
1:
SET_VREG %eax, rINSTq # vA <- result
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
2:
.if 0
xorl %eax, %eax
.else
negl %eax
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_rem_int_lit16: /* 0xd4 */
/* File: x86_64/op_rem_int_lit16.S */
/* File: x86_64/bindivLit16.S */
/*
* 32-bit binary div/rem operation. Handles special case of op1=-1.
*/
/* div/rem/lit16 vA, vB, #+CCCC */
/* Need A in rINST, ssssCCCC in ecx, vB in eax */
movl rINST, %eax # rax <- 000000BA
sarl $4, %eax # eax <- B
GET_VREG %eax, %rax # eax <- vB
movswl 2(rPC), %ecx # ecx <- ssssCCCC
andb $0xf, rINSTbl # rINST <- A
testl %ecx, %ecx
jz common_errDivideByZero
cmpl $-1, %ecx
je 2f
cdq # rax <- sign-extended of eax
idivl %ecx
1:
SET_VREG %edx, rINSTq # vA <- result
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
2:
.if 1
xorl %edx, %edx
.else
negl %edx
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_and_int_lit16: /* 0xd5 */
/* File: x86_64/op_and_int_lit16.S */
/* File: x86_64/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movl rINST, %eax # rax <- 000000BA
sarl $4, %eax # eax <- B
GET_VREG %eax, %rax # eax <- vB
andb $0xf, rINSTbl # rINST <- A
movswl 2(rPC), %ecx # ecx <- ssssCCCC
andl %ecx, %eax # for example: addl %ecx, %eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_or_int_lit16: /* 0xd6 */
/* File: x86_64/op_or_int_lit16.S */
/* File: x86_64/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movl rINST, %eax # rax <- 000000BA
sarl $4, %eax # eax <- B
GET_VREG %eax, %rax # eax <- vB
andb $0xf, rINSTbl # rINST <- A
movswl 2(rPC), %ecx # ecx <- ssssCCCC
orl %ecx, %eax # for example: addl %ecx, %eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_xor_int_lit16: /* 0xd7 */
/* File: x86_64/op_xor_int_lit16.S */
/* File: x86_64/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than eax, you can override "result".)
*
* For: add-int/lit16, rsub-int,
* and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
movl rINST, %eax # rax <- 000000BA
sarl $4, %eax # eax <- B
GET_VREG %eax, %rax # eax <- vB
andb $0xf, rINSTbl # rINST <- A
movswl 2(rPC), %ecx # ecx <- ssssCCCC
xorl %ecx, %eax # for example: addl %ecx, %eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_add_int_lit8: /* 0xd8 */
/* File: x86_64/op_add_int_lit8.S */
/* File: x86_64/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # rax <- BB
movsbl 3(rPC), %ecx # rcx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
addl %ecx, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_rsub_int_lit8: /* 0xd9 */
/* File: x86_64/op_rsub_int_lit8.S */
/* File: x86_64/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # rax <- BB
movsbl 3(rPC), %ecx # rcx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
subl %eax, %ecx # ex: addl %ecx,%eax
SET_VREG %ecx, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_mul_int_lit8: /* 0xda */
/* File: x86_64/op_mul_int_lit8.S */
/* File: x86_64/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # rax <- BB
movsbl 3(rPC), %ecx # rcx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
imull %ecx, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_div_int_lit8: /* 0xdb */
/* File: x86_64/op_div_int_lit8.S */
/* File: x86_64/bindivLit8.S */
/*
* 32-bit div/rem "lit8" binary operation. Handles special case of
* op0=minint & op1=-1
*/
/* div/rem/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # eax <- BB
movsbl 3(rPC), %ecx # ecx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
testl %ecx, %ecx
je common_errDivideByZero
cmpl $-1, %ecx
je 2f
cdq # rax <- sign-extended of eax
idivl %ecx
1:
SET_VREG %eax, rINSTq # vA <- result
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
2:
.if 0
xorl %eax, %eax
.else
negl %eax
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_rem_int_lit8: /* 0xdc */
/* File: x86_64/op_rem_int_lit8.S */
/* File: x86_64/bindivLit8.S */
/*
* 32-bit div/rem "lit8" binary operation. Handles special case of
* op0=minint & op1=-1
*/
/* div/rem/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # eax <- BB
movsbl 3(rPC), %ecx # ecx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
testl %ecx, %ecx
je common_errDivideByZero
cmpl $-1, %ecx
je 2f
cdq # rax <- sign-extended of eax
idivl %ecx
1:
SET_VREG %edx, rINSTq # vA <- result
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
2:
.if 1
xorl %edx, %edx
.else
negl %edx
.endif
jmp 1b
/* ------------------------------ */
.balign 128
.L_op_and_int_lit8: /* 0xdd */
/* File: x86_64/op_and_int_lit8.S */
/* File: x86_64/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # rax <- BB
movsbl 3(rPC), %ecx # rcx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
andl %ecx, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_or_int_lit8: /* 0xde */
/* File: x86_64/op_or_int_lit8.S */
/* File: x86_64/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # rax <- BB
movsbl 3(rPC), %ecx # rcx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
orl %ecx, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_xor_int_lit8: /* 0xdf */
/* File: x86_64/op_xor_int_lit8.S */
/* File: x86_64/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # rax <- BB
movsbl 3(rPC), %ecx # rcx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
xorl %ecx, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_shl_int_lit8: /* 0xe0 */
/* File: x86_64/op_shl_int_lit8.S */
/* File: x86_64/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # rax <- BB
movsbl 3(rPC), %ecx # rcx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
sall %cl, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_shr_int_lit8: /* 0xe1 */
/* File: x86_64/op_shr_int_lit8.S */
/* File: x86_64/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # rax <- BB
movsbl 3(rPC), %ecx # rcx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
sarl %cl, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_ushr_int_lit8: /* 0xe2 */
/* File: x86_64/op_ushr_int_lit8.S */
/* File: x86_64/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = eax op ecx".
* This could be an x86 instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* For: add-int/lit8, rsub-int/lit8
* and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
movzbq 2(rPC), %rax # rax <- BB
movsbl 3(rPC), %ecx # rcx <- ssssssCC
GET_VREG %eax, %rax # eax <- rBB
shrl %cl, %eax # ex: addl %ecx,%eax
SET_VREG %eax, rINSTq
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_quick: /* 0xe3 */
/* File: x86_64/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick, iget-wide-quick */
/* op vA, vB, offset@CCCC */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
movzwq 2(rPC), %rax # eax <- field byte offset
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf,rINSTbl # rINST <- A
.if 0
movq (%rcx,%rax,1), %rax
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
movl (%rcx,%rax,1), %eax
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_wide_quick: /* 0xe4 */
/* File: x86_64/op_iget_wide_quick.S */
/* File: x86_64/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick, iget-wide-quick */
/* op vA, vB, offset@CCCC */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
movzwq 2(rPC), %rax # eax <- field byte offset
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf,rINSTbl # rINST <- A
.if 1
movq (%rcx,%rax,1), %rax
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
movswl (%rcx,%rax,1), %eax
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_object_quick: /* 0xe5 */
/* File: x86_64/op_iget_object_quick.S */
/* For: iget-object-quick */
/* op vA, vB, offset@CCCC */
.extern artIGetObjectFromMterp
movzbq rINSTbl, %rcx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG OUT_32_ARG0, %rcx # vB (object we're operating on)
movzwl 2(rPC), OUT_32_ARG1 # eax <- field byte offset
EXPORT_PC
callq SYMBOL(artIGetObjectFromMterp) # (obj, offset)
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jnz MterpException # bail out
andb $0xf, rINSTbl # rINST <- A
SET_VREG_OBJECT %eax, rINSTq # fp[A] <- value
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_quick: /* 0xe6 */
/* File: x86_64/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
movzbq rINSTbl, %rcx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf, rINSTbl # rINST <- A
GET_VREG rINST, rINSTq # rINST <- v[A]
movzwq 2(rPC), %rax # rax <- field byte offset
movl rINST, (%rcx,%rax,1)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_wide_quick: /* 0xe7 */
/* File: x86_64/op_iput_wide_quick.S */
/* iput-wide-quick vA, vB, offset@CCCC */
movzbq rINSTbl, %rcx # rcx<- BA
sarl $4, %ecx # ecx<- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
testl %ecx, %ecx # is object null?
je common_errNullObject
movzwq 2(rPC), %rax # rax<- field byte offset
leaq (%rcx,%rax,1), %rcx # ecx<- Address of 64-bit target
andb $0xf, rINSTbl # rINST<- A
GET_WIDE_VREG %rax, rINSTq # rax<- fp[A]/fp[A+1]
movq %rax, (%rcx) # obj.field<- r0/r1
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_object_quick: /* 0xe8 */
/* File: x86_64/op_iput_object_quick.S */
EXPORT_PC
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG0
movq rPC, OUT_ARG1
REFRESH_INST 232
movl rINST, OUT_32_ARG2
call SYMBOL(MterpIputObjectQuick)
testb %al, %al
jz MterpException
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_quick: /* 0xe9 */
/* File: x86_64/op_invoke_virtual_quick.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtualQuick
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 233
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeVirtualQuick)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_range_quick: /* 0xea */
/* File: x86_64/op_invoke_virtual_range_quick.S */
/* File: x86_64/invoke.S */
/*
* Generic invoke handler wrapper.
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
.extern MterpInvokeVirtualQuickRange
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
REFRESH_INST 234
movl rINST, OUT_32_ARG3
call SYMBOL(MterpInvokeVirtualQuickRange)
testb %al, %al
jz MterpException
ADVANCE_PC 3
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
FETCH_INST
GOTO_NEXT
/* ------------------------------ */
.balign 128
.L_op_iput_boolean_quick: /* 0xeb */
/* File: x86_64/op_iput_boolean_quick.S */
/* File: x86_64/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
movzbq rINSTbl, %rcx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf, rINSTbl # rINST <- A
GET_VREG rINST, rINSTq # rINST <- v[A]
movzwq 2(rPC), %rax # rax <- field byte offset
movb rINSTbl, (%rcx,%rax,1)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_byte_quick: /* 0xec */
/* File: x86_64/op_iput_byte_quick.S */
/* File: x86_64/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
movzbq rINSTbl, %rcx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf, rINSTbl # rINST <- A
GET_VREG rINST, rINSTq # rINST <- v[A]
movzwq 2(rPC), %rax # rax <- field byte offset
movb rINSTbl, (%rcx,%rax,1)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_char_quick: /* 0xed */
/* File: x86_64/op_iput_char_quick.S */
/* File: x86_64/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
movzbq rINSTbl, %rcx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf, rINSTbl # rINST <- A
GET_VREG rINST, rINSTq # rINST <- v[A]
movzwq 2(rPC), %rax # rax <- field byte offset
movw rINSTw, (%rcx,%rax,1)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iput_short_quick: /* 0xee */
/* File: x86_64/op_iput_short_quick.S */
/* File: x86_64/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
movzbq rINSTbl, %rcx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf, rINSTbl # rINST <- A
GET_VREG rINST, rINSTq # rINST <- v[A]
movzwq 2(rPC), %rax # rax <- field byte offset
movw rINSTw, (%rcx,%rax,1)
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_boolean_quick: /* 0xef */
/* File: x86_64/op_iget_boolean_quick.S */
/* File: x86_64/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick, iget-wide-quick */
/* op vA, vB, offset@CCCC */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
movzwq 2(rPC), %rax # eax <- field byte offset
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf,rINSTbl # rINST <- A
.if 0
movq (%rcx,%rax,1), %rax
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
movsbl (%rcx,%rax,1), %eax
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_byte_quick: /* 0xf0 */
/* File: x86_64/op_iget_byte_quick.S */
/* File: x86_64/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick, iget-wide-quick */
/* op vA, vB, offset@CCCC */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
movzwq 2(rPC), %rax # eax <- field byte offset
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf,rINSTbl # rINST <- A
.if 0
movq (%rcx,%rax,1), %rax
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
movsbl (%rcx,%rax,1), %eax
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_char_quick: /* 0xf1 */
/* File: x86_64/op_iget_char_quick.S */
/* File: x86_64/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick, iget-wide-quick */
/* op vA, vB, offset@CCCC */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
movzwq 2(rPC), %rax # eax <- field byte offset
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf,rINSTbl # rINST <- A
.if 0
movq (%rcx,%rax,1), %rax
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
movzwl (%rcx,%rax,1), %eax
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_iget_short_quick: /* 0xf2 */
/* File: x86_64/op_iget_short_quick.S */
/* File: x86_64/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick, iget-wide-quick */
/* op vA, vB, offset@CCCC */
movl rINST, %ecx # rcx <- BA
sarl $4, %ecx # ecx <- B
GET_VREG %ecx, %rcx # vB (object we're operating on)
movzwq 2(rPC), %rax # eax <- field byte offset
testl %ecx, %ecx # is object null?
je common_errNullObject
andb $0xf,rINSTbl # rINST <- A
.if 0
movq (%rcx,%rax,1), %rax
SET_WIDE_VREG %rax, rINSTq # fp[A] <- value
.else
movswl (%rcx,%rax,1), %eax
SET_VREG %eax, rINSTq # fp[A] <- value
.endif
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/* ------------------------------ */
.balign 128
.L_op_unused_f3: /* 0xf3 */
/* File: x86_64/op_unused_f3.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f4: /* 0xf4 */
/* File: x86_64/op_unused_f4.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f5: /* 0xf5 */
/* File: x86_64/op_unused_f5.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f6: /* 0xf6 */
/* File: x86_64/op_unused_f6.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f7: /* 0xf7 */
/* File: x86_64/op_unused_f7.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f8: /* 0xf8 */
/* File: x86_64/op_unused_f8.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f9: /* 0xf9 */
/* File: x86_64/op_unused_f9.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_invoke_polymorphic: /* 0xfa */
/* Transfer stub to alternate interpreter */
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_invoke_polymorphic_range: /* 0xfb */
/* Transfer stub to alternate interpreter */
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_invoke_custom: /* 0xfc */
/* Transfer stub to alternate interpreter */
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_invoke_custom_range: /* 0xfd */
/* Transfer stub to alternate interpreter */
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_fe: /* 0xfe */
/* File: x86_64/op_unused_fe.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_ff: /* 0xff */
/* File: x86_64/op_unused_ff.S */
/* File: x86_64/unused.S */
/*
* Bail to reference interpreter to throw.
*/
jmp MterpFallback
.balign 128
SIZE(SYMBOL(artMterpAsmInstructionStart),SYMBOL(artMterpAsmInstructionStart))
.global SYMBOL(artMterpAsmInstructionEnd)
SYMBOL(artMterpAsmInstructionEnd):
/*
* ===========================================================================
* Sister implementations
* ===========================================================================
*/
.global SYMBOL(artMterpAsmSisterStart)
FUNCTION_TYPE(SYMBOL(artMterpAsmSisterStart))
.text
.balign 4
SYMBOL(artMterpAsmSisterStart):
SIZE(SYMBOL(artMterpAsmSisterStart),SYMBOL(artMterpAsmSisterStart))
.global SYMBOL(artMterpAsmSisterEnd)
SYMBOL(artMterpAsmSisterEnd):
.global SYMBOL(artMterpAsmAltInstructionStart)
FUNCTION_TYPE(SYMBOL(artMterpAsmAltInstructionStart))
.text
SYMBOL(artMterpAsmAltInstructionStart) = .L_ALT_op_nop
/* ------------------------------ */
.balign 128
.L_ALT_op_nop: /* 0x00 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(0*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move: /* 0x01 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(1*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_from16: /* 0x02 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(2*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_16: /* 0x03 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(3*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide: /* 0x04 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(4*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide_from16: /* 0x05 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(5*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide_16: /* 0x06 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(6*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object: /* 0x07 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(7*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object_from16: /* 0x08 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(8*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object_16: /* 0x09 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(9*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result: /* 0x0a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(10*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result_wide: /* 0x0b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(11*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result_object: /* 0x0c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(12*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_exception: /* 0x0d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(13*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_return_void: /* 0x0e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(14*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_return: /* 0x0f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(15*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_return_wide: /* 0x10 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(16*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_return_object: /* 0x11 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(17*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_4: /* 0x12 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(18*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_16: /* 0x13 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(19*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const: /* 0x14 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(20*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_high16: /* 0x15 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(21*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_16: /* 0x16 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(22*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_32: /* 0x17 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(23*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide: /* 0x18 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(24*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_high16: /* 0x19 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(25*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_string: /* 0x1a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(26*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_string_jumbo: /* 0x1b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(27*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_class: /* 0x1c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(28*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_monitor_enter: /* 0x1d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(29*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_monitor_exit: /* 0x1e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(30*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_check_cast: /* 0x1f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(31*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_instance_of: /* 0x20 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(32*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_array_length: /* 0x21 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(33*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_new_instance: /* 0x22 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(34*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_new_array: /* 0x23 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(35*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_filled_new_array: /* 0x24 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(36*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_filled_new_array_range: /* 0x25 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(37*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_fill_array_data: /* 0x26 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(38*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_throw: /* 0x27 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(39*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_goto: /* 0x28 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(40*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_goto_16: /* 0x29 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(41*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_goto_32: /* 0x2a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(42*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_packed_switch: /* 0x2b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(43*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sparse_switch: /* 0x2c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(44*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpl_float: /* 0x2d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(45*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpg_float: /* 0x2e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(46*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpl_double: /* 0x2f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(47*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpg_double: /* 0x30 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(48*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmp_long: /* 0x31 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(49*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_eq: /* 0x32 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(50*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ne: /* 0x33 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(51*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_lt: /* 0x34 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(52*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ge: /* 0x35 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(53*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gt: /* 0x36 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(54*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_le: /* 0x37 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(55*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_eqz: /* 0x38 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(56*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_nez: /* 0x39 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(57*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ltz: /* 0x3a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(58*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gez: /* 0x3b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(59*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gtz: /* 0x3c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(60*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_lez: /* 0x3d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(61*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_3e: /* 0x3e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(62*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_3f: /* 0x3f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(63*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_40: /* 0x40 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(64*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_41: /* 0x41 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(65*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_42: /* 0x42 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(66*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_43: /* 0x43 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(67*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget: /* 0x44 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(68*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_wide: /* 0x45 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(69*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_object: /* 0x46 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(70*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_boolean: /* 0x47 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(71*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_byte: /* 0x48 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(72*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_char: /* 0x49 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(73*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_short: /* 0x4a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(74*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput: /* 0x4b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(75*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_wide: /* 0x4c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(76*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_object: /* 0x4d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(77*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_boolean: /* 0x4e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(78*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_byte: /* 0x4f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(79*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_char: /* 0x50 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(80*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_short: /* 0x51 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(81*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget: /* 0x52 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(82*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_wide: /* 0x53 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(83*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_object: /* 0x54 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(84*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_boolean: /* 0x55 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(85*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_byte: /* 0x56 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(86*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_char: /* 0x57 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(87*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_short: /* 0x58 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(88*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput: /* 0x59 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(89*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_wide: /* 0x5a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(90*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_object: /* 0x5b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(91*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_boolean: /* 0x5c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(92*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_byte: /* 0x5d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(93*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_char: /* 0x5e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(94*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_short: /* 0x5f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(95*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget: /* 0x60 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(96*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_wide: /* 0x61 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(97*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_object: /* 0x62 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(98*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_boolean: /* 0x63 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(99*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_byte: /* 0x64 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(100*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_char: /* 0x65 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(101*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_short: /* 0x66 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(102*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput: /* 0x67 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(103*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_wide: /* 0x68 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(104*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_object: /* 0x69 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(105*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_boolean: /* 0x6a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(106*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_byte: /* 0x6b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(107*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_char: /* 0x6c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(108*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_short: /* 0x6d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(109*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual: /* 0x6e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(110*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_super: /* 0x6f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(111*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_direct: /* 0x70 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(112*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_static: /* 0x71 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(113*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_interface: /* 0x72 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(114*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_return_void_no_barrier: /* 0x73 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(115*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_range: /* 0x74 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(116*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_super_range: /* 0x75 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(117*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_direct_range: /* 0x76 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(118*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_static_range: /* 0x77 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(119*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_interface_range: /* 0x78 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(120*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_79: /* 0x79 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(121*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_7a: /* 0x7a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(122*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_int: /* 0x7b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(123*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_not_int: /* 0x7c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(124*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_long: /* 0x7d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(125*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_not_long: /* 0x7e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(126*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_float: /* 0x7f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(127*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_double: /* 0x80 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(128*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_long: /* 0x81 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(129*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_float: /* 0x82 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(130*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_double: /* 0x83 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(131*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_int: /* 0x84 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(132*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_float: /* 0x85 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(133*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_double: /* 0x86 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(134*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_int: /* 0x87 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(135*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_long: /* 0x88 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(136*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_double: /* 0x89 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(137*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_int: /* 0x8a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(138*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_long: /* 0x8b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(139*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_float: /* 0x8c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(140*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_byte: /* 0x8d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(141*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_char: /* 0x8e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(142*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_short: /* 0x8f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(143*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int: /* 0x90 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(144*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_int: /* 0x91 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(145*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int: /* 0x92 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(146*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int: /* 0x93 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(147*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int: /* 0x94 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(148*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int: /* 0x95 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(149*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int: /* 0x96 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(150*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int: /* 0x97 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(151*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int: /* 0x98 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(152*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int: /* 0x99 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(153*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int: /* 0x9a */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(154*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_long: /* 0x9b */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(155*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_long: /* 0x9c */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(156*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_long: /* 0x9d */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(157*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_long: /* 0x9e */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(158*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_long: /* 0x9f */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(159*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_long: /* 0xa0 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(160*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_long: /* 0xa1 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(161*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_long: /* 0xa2 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(162*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_long: /* 0xa3 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(163*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_long: /* 0xa4 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(164*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_long: /* 0xa5 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(165*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_float: /* 0xa6 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(166*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_float: /* 0xa7 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(167*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_float: /* 0xa8 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(168*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_float: /* 0xa9 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(169*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_float: /* 0xaa */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(170*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_double: /* 0xab */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(171*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_double: /* 0xac */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(172*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_double: /* 0xad */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(173*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_double: /* 0xae */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(174*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_double: /* 0xaf */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(175*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_2addr: /* 0xb0 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(176*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_int_2addr: /* 0xb1 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(177*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_2addr: /* 0xb2 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(178*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_2addr: /* 0xb3 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(179*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_2addr: /* 0xb4 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(180*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_2addr: /* 0xb5 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(181*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_2addr: /* 0xb6 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(182*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_2addr: /* 0xb7 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(183*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int_2addr: /* 0xb8 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(184*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int_2addr: /* 0xb9 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(185*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int_2addr: /* 0xba */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(186*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_long_2addr: /* 0xbb */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(187*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_long_2addr: /* 0xbc */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(188*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_long_2addr: /* 0xbd */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(189*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_long_2addr: /* 0xbe */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(190*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_long_2addr: /* 0xbf */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(191*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_long_2addr: /* 0xc0 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(192*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_long_2addr: /* 0xc1 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(193*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_long_2addr: /* 0xc2 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(194*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_long_2addr: /* 0xc3 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(195*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_long_2addr: /* 0xc4 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(196*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_long_2addr: /* 0xc5 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(197*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_float_2addr: /* 0xc6 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(198*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_float_2addr: /* 0xc7 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(199*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_float_2addr: /* 0xc8 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(200*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_float_2addr: /* 0xc9 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(201*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_float_2addr: /* 0xca */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(202*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_double_2addr: /* 0xcb */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(203*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_double_2addr: /* 0xcc */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(204*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_double_2addr: /* 0xcd */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(205*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_double_2addr: /* 0xce */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(206*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_double_2addr: /* 0xcf */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(207*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_lit16: /* 0xd0 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(208*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rsub_int: /* 0xd1 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(209*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_lit16: /* 0xd2 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(210*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_lit16: /* 0xd3 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(211*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_lit16: /* 0xd4 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(212*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_lit16: /* 0xd5 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(213*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_lit16: /* 0xd6 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(214*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_lit16: /* 0xd7 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(215*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_lit8: /* 0xd8 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(216*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rsub_int_lit8: /* 0xd9 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(217*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_lit8: /* 0xda */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(218*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_lit8: /* 0xdb */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(219*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_lit8: /* 0xdc */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(220*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_lit8: /* 0xdd */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(221*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_lit8: /* 0xde */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(222*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_lit8: /* 0xdf */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(223*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int_lit8: /* 0xe0 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(224*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int_lit8: /* 0xe1 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(225*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int_lit8: /* 0xe2 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(226*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_quick: /* 0xe3 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(227*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_wide_quick: /* 0xe4 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(228*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_object_quick: /* 0xe5 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(229*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_quick: /* 0xe6 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(230*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_wide_quick: /* 0xe7 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(231*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_object_quick: /* 0xe8 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(232*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_quick: /* 0xe9 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(233*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_range_quick: /* 0xea */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(234*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_boolean_quick: /* 0xeb */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(235*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_byte_quick: /* 0xec */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(236*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_char_quick: /* 0xed */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(237*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_short_quick: /* 0xee */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(238*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_boolean_quick: /* 0xef */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(239*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_byte_quick: /* 0xf0 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(240*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_char_quick: /* 0xf1 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(241*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_short_quick: /* 0xf2 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(242*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f3: /* 0xf3 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(243*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f4: /* 0xf4 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(244*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f5: /* 0xf5 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(245*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f6: /* 0xf6 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(246*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f7: /* 0xf7 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(247*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f8: /* 0xf8 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(248*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f9: /* 0xf9 */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(249*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_polymorphic: /* 0xfa */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(250*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_polymorphic_range: /* 0xfb */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(251*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_custom: /* 0xfc */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(252*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_custom_range: /* 0xfd */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(253*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_fe: /* 0xfe */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(254*128)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_ff: /* 0xff */
/* File: x86_64/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Unlike the Arm handler, we can't do this as a tail call
* because rIBASE is caller save and we need to reload it.
*
* Note that unlike in the Arm implementation, we should never arrive
* here with a zero breakFlag because we always refresh rIBASE on
* return.
*/
.extern MterpCheckBefore
REFRESH_IBASE
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rPC, OUT_ARG2
call SYMBOL(MterpCheckBefore) # (self, shadow_frame, dex_pc_ptr)
jmp .L_op_nop+(255*128)
.balign 128
SIZE(SYMBOL(artMterpAsmAltInstructionStart),SYMBOL(artMterpAsmAltInstructionStart))
.global SYMBOL(artMterpAsmAltInstructionEnd)
SYMBOL(artMterpAsmAltInstructionEnd):
/* File: x86_64/footer.S */
/*
* ===========================================================================
* Common subroutines and data
* ===========================================================================
*/
.text
.align 2
/*
* We've detected a condition that will result in an exception, but the exception
* has not yet been thrown. Just bail out to the reference interpreter to deal with it.
* TUNING: for consistency, we may want to just go ahead and handle these here.
*/
common_errDivideByZero:
EXPORT_PC
#if MTERP_LOGGING
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
call SYMBOL(MterpLogDivideByZeroException)
#endif
jmp MterpCommonFallback
common_errArrayIndex:
EXPORT_PC
#if MTERP_LOGGING
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
call SYMBOL(MterpLogArrayIndexException)
#endif
jmp MterpCommonFallback
common_errNegativeArraySize:
EXPORT_PC
#if MTERP_LOGGING
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
call SYMBOL(MterpLogNegativeArraySizeException)
#endif
jmp MterpCommonFallback
common_errNoSuchMethod:
EXPORT_PC
#if MTERP_LOGGING
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
call SYMBOL(MterpLogNoSuchMethodException)
#endif
jmp MterpCommonFallback
common_errNullObject:
EXPORT_PC
#if MTERP_LOGGING
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
call SYMBOL(MterpLogNullObjectException)
#endif
jmp MterpCommonFallback
common_exceptionThrown:
EXPORT_PC
#if MTERP_LOGGING
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
call SYMBOL(MterpLogExceptionThrownException)
#endif
jmp MterpCommonFallback
MterpSuspendFallback:
EXPORT_PC
#if MTERP_LOGGING
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movl THREAD_FLAGS_OFFSET(OUT_ARG0), OUT_32_ARG2
call SYMBOL(MterpLogSuspendFallback)
#endif
jmp MterpCommonFallback
/*
* If we're here, something is out of the ordinary. If there is a pending
* exception, handle it. Otherwise, roll back and retry with the reference
* interpreter.
*/
MterpPossibleException:
movq rSELF, %rcx
cmpq $0, THREAD_EXCEPTION_OFFSET(%rcx)
jz MterpFallback
/* intentional fallthrough - handle pending exception. */
/*
* On return from a runtime helper routine, we've found a pending exception.
* Can we handle it here - or need to bail out to caller?
*
*/
MterpException:
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
call SYMBOL(MterpHandleException)
testb %al, %al
jz MterpExceptionReturn
movq OFF_FP_CODE_ITEM(rFP), %rax
mov OFF_FP_DEX_PC(rFP), %ecx
leaq CODEITEM_INSNS_OFFSET(%rax), rPC
leaq (rPC, %rcx, 2), rPC
movq rPC, OFF_FP_DEX_PC_PTR(rFP)
/* Do we need to switch interpreters? */
call SYMBOL(MterpShouldSwitchInterpreters)
testb %al, %al
jnz MterpFallback
/* resume execution at catch block */
REFRESH_IBASE
FETCH_INST
GOTO_NEXT
/* NOTE: no fallthrough */
/*
* Common handling for branches with support for Jit profiling.
* On entry:
* rINST <= signed offset
* rPROFILE <= signed hotness countdown (expanded to 32 bits)
* condition bits <= set to establish sign of offset (use "NoFlags" entry if not)
*
* We have quite a few different cases for branch profiling, OSR detection and
* suspend check support here.
*
* Taken backward branches:
* If profiling active, do hotness countdown and report if we hit zero.
* If in osr check mode, see if our target is a compiled loop header entry and do OSR if so.
* Is there a pending suspend request? If so, suspend.
*
* Taken forward branches and not-taken backward branches:
* If in osr check mode, see if our target is a compiled loop header entry and do OSR if so.
*
* Our most common case is expected to be a taken backward branch with active jit profiling,
* but no full OSR check and no pending suspend request.
* Next most common case is not-taken branch with no full OSR check.
*
*/
MterpCommonTakenBranch:
jg .L_forward_branch # don't add forward branches to hotness
/*
* We need to subtract 1 from positive values and we should not see 0 here,
* so we may use the result of the comparison with -1.
*/
#if JIT_CHECK_OSR != -1
# error "JIT_CHECK_OSR must be -1."
#endif
cmpl $JIT_CHECK_OSR, rPROFILE
je .L_osr_check
decl rPROFILE
je .L_add_batch # counted down to zero - report
.L_resume_backward_branch:
movq rSELF, %rax
testl $(THREAD_SUSPEND_OR_CHECKPOINT_REQUEST), THREAD_FLAGS_OFFSET(%rax)
REFRESH_IBASE
leaq (rPC, rINSTq, 2), rPC
FETCH_INST
jnz .L_suspend_request_pending
GOTO_NEXT
.L_suspend_request_pending:
EXPORT_PC
movq rSELF, OUT_ARG0
call SYMBOL(MterpSuspendCheck) # (self)
testb %al, %al
jnz MterpFallback
REFRESH_IBASE # might have changed during suspend
GOTO_NEXT
.L_no_count_backwards:
cmpl $JIT_CHECK_OSR, rPROFILE # possible OSR re-entry?
jne .L_resume_backward_branch
.L_osr_check:
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rINSTq, OUT_ARG2
call SYMBOL(MterpMaybeDoOnStackReplacement) # (self, shadow_frame, offset)
testb %al, %al
jz .L_resume_backward_branch
jmp MterpOnStackReplacement
.L_forward_branch:
cmpl $JIT_CHECK_OSR, rPROFILE # possible OSR re-entry?
je .L_check_osr_forward
.L_resume_forward_branch:
leaq (rPC, rINSTq, 2), rPC
FETCH_INST
GOTO_NEXT
.L_check_osr_forward:
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movq rINSTq, OUT_ARG2
call SYMBOL(MterpMaybeDoOnStackReplacement) # (self, shadow_frame, offset)
testb %al, %al
jz .L_resume_forward_branch
jmp MterpOnStackReplacement
.L_add_batch:
movl rPROFILE, %eax
movq OFF_FP_METHOD(rFP), OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movw %ax, OFF_FP_COUNTDOWN_OFFSET(rFP)
movq rSELF, OUT_ARG2
call SYMBOL(MterpAddHotnessBatch) # (method, shadow_frame, self)
movswl %ax, rPROFILE
jmp .L_no_count_backwards
/*
* Entered from the conditional branch handlers when OSR check request active on
* not-taken path. All Dalvik not-taken conditional branch offsets are 2.
*/
.L_check_not_taken_osr:
EXPORT_PC
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movl $2, OUT_32_ARG2
call SYMBOL(MterpMaybeDoOnStackReplacement) # (self, shadow_frame, offset)
testb %al, %al
jnz MterpOnStackReplacement
ADVANCE_PC_FETCH_AND_GOTO_NEXT 2
/*
* On-stack replacement has happened, and now we've returned from the compiled method.
*/
MterpOnStackReplacement:
#if MTERP_LOGGING
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movl rINST, OUT_32_ARG2
call SYMBOL(MterpLogOSR)
#endif
movl $1, %eax
jmp MterpDone
/*
* Bail out to reference interpreter.
*/
MterpFallback:
EXPORT_PC
#if MTERP_LOGGING
movq rSELF, OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
call SYMBOL(MterpLogFallback)
#endif
MterpCommonFallback:
xorl %eax, %eax
jmp MterpDone
/*
* On entry:
* uint32_t* rFP (should still be live, pointer to base of vregs)
*/
MterpExceptionReturn:
movl $1, %eax
jmp MterpDone
MterpReturn:
movq OFF_FP_RESULT_REGISTER(rFP), %rdx
movq %rax, (%rdx)
movl $1, %eax
MterpDone:
/*
* At this point, we expect rPROFILE to be non-zero. If negative, hotness is disabled or we're
* checking for OSR. If greater than zero, we might have unreported hotness to register
* (the difference between the ending rPROFILE and the cached hotness counter). rPROFILE
* should only reach zero immediately after a hotness decrement, and is then reset to either
* a negative special state or the new non-zero countdown value.
*/
testl rPROFILE, rPROFILE
jle MRestoreFrame # if > 0, we may have some counts to report.
movl %eax, rINST # stash return value
/* Report cached hotness counts */
movl rPROFILE, %eax
movq OFF_FP_METHOD(rFP), OUT_ARG0
leaq OFF_FP_SHADOWFRAME(rFP), OUT_ARG1
movw %ax, OFF_FP_COUNTDOWN_OFFSET(rFP)
movq rSELF, OUT_ARG2
call SYMBOL(MterpAddHotnessBatch) # (method, shadow_frame, self)
movl rINST, %eax # restore return value
/* pop up frame */
MRestoreFrame:
addq $FRAME_SIZE, %rsp
.cfi_adjust_cfa_offset -FRAME_SIZE
/* Restore callee save register */
POP %r15
POP %r14
POP %r13
POP %r12
POP %rbp
POP %rbx
ret
.cfi_endproc
SIZE(ExecuteMterpImpl,ExecuteMterpImpl)