/******************************************************************************
*
* Copyright (C) 2009-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#ifndef BTIF_STORAGE_H
#define BTIF_STORAGE_H
#include <hardware/bluetooth.h>
#include "bt_target.h"
#include "bt_types.h"
/*******************************************************************************
** Constants & Macros
********************************************************************************/
#define BTIF_STORAGE_FILL_PROPERTY(p_prop, t, l, p_v) \
(p_prop)->type = t;(p_prop)->len = l; (p_prop)->val = (p_v);
/*******************************************************************************
** Functions
********************************************************************************/
/*******************************************************************************
**
** Function btif_storage_get_adapter_property
**
** Description BTIF storage API - Fetches the adapter property->type
** from NVRAM and fills property->val.
** Caller should provide memory for property->val and
** set the property->val
**
** Returns BT_STATUS_SUCCESS if the fetch was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_get_adapter_property(bt_property_t *property);
/*******************************************************************************
**
** Function btif_storage_set_adapter_property
**
** Description BTIF storage API - Stores the adapter property
** to NVRAM
**
** Returns BT_STATUS_SUCCESS if the store was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_set_adapter_property(bt_property_t *property);
/*******************************************************************************
**
** Function btif_storage_get_remote_device_property
**
** Description BTIF storage API - Fetches the remote device property->type
** from NVRAM and fills property->val.
** Caller should provide memory for property->val and
** set the property->val
**
** Returns BT_STATUS_SUCCESS if the fetch was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_get_remote_device_property(bt_bdaddr_t *remote_bd_addr,
bt_property_t *property);
/*******************************************************************************
**
** Function btif_storage_set_remote_device_property
**
** Description BTIF storage API - Stores the remote device property
** to NVRAM
**
** Returns BT_STATUS_SUCCESS if the store was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_set_remote_device_property(bt_bdaddr_t *remote_bd_addr,
bt_property_t *property);
/*******************************************************************************
**
** Function btif_storage_add_remote_device
**
** Description BTIF storage API - Adds a newly discovered device to
** track along with the timestamp. Also, stores the various
** properties - RSSI, BDADDR, NAME (if found in EIR)
**
** Returns BT_STATUS_SUCCESS if successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_add_remote_device(bt_bdaddr_t *remote_bd_addr,
uint32_t num_properties,
bt_property_t *properties);
/*******************************************************************************
**
** Function btif_storage_add_bonded_device
**
** Description BTIF storage API - Adds the newly bonded device to NVRAM
** along with the link-key, Key type and Pin key length
**
** Returns BT_STATUS_SUCCESS if the store was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_add_bonded_device(bt_bdaddr_t *remote_bd_addr,
LINK_KEY link_key,
uint8_t key_type,
uint8_t pin_length);
/*******************************************************************************
**
** Function btif_storage_remove_bonded_device
**
** Description BTIF storage API - Deletes the bonded device from NVRAM
**
** Returns BT_STATUS_SUCCESS if the deletion was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_remove_bonded_device(bt_bdaddr_t *remote_bd_addr);
/*******************************************************************************
**
** Function btif_storage_remove_bonded_device
**
** Description BTIF storage API - Deletes the bonded device from NVRAM
**
** Returns BT_STATUS_SUCCESS if the deletion was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_load_bonded_devices(void);
/*******************************************************************************
**
** Function btif_storage_read_hl_apps_cb
**
** Description BTIF storage API - Read HL application control block from NVRAM
**
** Returns BT_STATUS_SUCCESS if the operation was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_read_hl_apps_cb(char *value, int value_size);
/*******************************************************************************
**
** Function btif_storage_write_hl_apps_cb
**
** Description BTIF storage API - Write HL application control block to NVRAM
**
** Returns BT_STATUS_SUCCESS if the operation was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_write_hl_apps_cb(char *value, int value_size);
/*******************************************************************************
**
** Function btif_storage_read_hl_apps_cb
**
** Description BTIF storage API - Read HL application configuration from NVRAM
**
** Returns BT_STATUS_SUCCESS if the operation was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_read_hl_app_data(UINT8 app_idx, char *value, int value_size);
/*******************************************************************************
**
** Function btif_storage_write_hl_app_data
**
** Description BTIF storage API - Write HL application configuration to NVRAM
**
** Returns BT_STATUS_SUCCESS if the operation was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_write_hl_app_data(UINT8 app_idx, char *value, int value_size);
/*******************************************************************************
**
** Function btif_storage_read_hl_mdl_data
**
** Description BTIF storage API - Read HL application MDL configuration from NVRAM
**
** Returns BT_STATUS_SUCCESS if the operation was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_read_hl_mdl_data(UINT8 app_idx, char *value, int value_size);
/*******************************************************************************
**
** Function btif_storage_write_hl_mdl_data
**
** Description BTIF storage API - Write HL application MDL configuration from NVRAM
**
** Returns BT_STATUS_SUCCESS if the operation was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_write_hl_mdl_data(UINT8 app_idx, char *value, int value_size);
/*******************************************************************************
**
** Function btif_storage_add_hid_device_info
**
** Description BTIF storage API - Adds the hid information of bonded hid devices-to NVRAM
**
** Returns BT_STATUS_SUCCESS if the store was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_add_hid_device_info(bt_bdaddr_t *remote_bd_addr,
UINT16 attr_mask, UINT8 sub_class,
UINT8 app_id, UINT16 vendor_id,
UINT16 product_id, UINT16 version,
UINT8 ctry_code, UINT16 ssr_max_latency,
UINT16 ssr_min_tout, UINT16 dl_len, UINT8 *dsc_list);
/*******************************************************************************
**
** Function btif_storage_load_bonded_hid_info
**
** Description BTIF storage API - Loads hid info for all the bonded devices from NVRAM
** and adds those devices to the BTA_HH.
**
** Returns BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_load_bonded_hid_info(void);
/*******************************************************************************
**
** Function btif_storage_remove_hid_info
**
** Description BTIF storage API - Deletes the bonded hid device info from NVRAM
**
** Returns BT_STATUS_SUCCESS if the deletion was successful,
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_remove_hid_info(bt_bdaddr_t *remote_bd_addr);
/*******************************************************************************
**
** Function btif_storage_is_retricted_device
**
** Description BTIF storage API - checks if this device is a restricted device
**
** Returns TRUE if the device is labled as restricted
** FALSE otherwise
**
*******************************************************************************/
BOOLEAN btif_storage_is_restricted_device(const bt_bdaddr_t *remote_bd_addr);
#if (BLE_INCLUDED == TRUE)
bt_status_t btif_storage_add_ble_bonding_key( bt_bdaddr_t *remote_bd_addr,
char *key,
uint8_t key_type,
uint8_t key_length);
bt_status_t btif_storage_get_ble_bonding_key(bt_bdaddr_t *remote_bd_addr,
UINT8 key_type,
char *key_value,
int key_length);
bt_status_t btif_storage_add_ble_local_key(char *key,
uint8_t key_type,
uint8_t key_length);
bt_status_t btif_storage_remove_ble_bonding_keys(bt_bdaddr_t *remote_bd_addr);
bt_status_t btif_storage_remove_ble_local_keys(void);
bt_status_t btif_storage_get_ble_local_key(UINT8 key_type,
char *key_value,
int key_len);
bt_status_t btif_storage_get_remote_addr_type(bt_bdaddr_t *remote_bd_addr,
int *addr_type);
bt_status_t btif_storage_set_remote_addr_type(bt_bdaddr_t *remote_bd_addr,
UINT8 addr_type);
#endif
/*******************************************************************************
**
** Function btif_storage_get_remote_version
**
** Description Fetch remote version info on cached remote device
**
** Returns BT_STATUS_SUCCESS if found
** BT_STATUS_FAIL otherwise
**
*******************************************************************************/
bt_status_t btif_storage_get_remote_version(const bt_bdaddr_t *remote_bd_addr,
bt_remote_version_t *p_ver);
/******************************************************************************
* Exported for unit tests
*****************************************************************************/
size_t btif_split_uuids_string(const char *str, bt_uuid_t *p_uuid, size_t max_uuids);
#endif /* BTIF_STORAGE_H */