<?xml version="1.0" encoding="utf-8"?>
<!--
/*
**
** Copyright 2015 The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Toast message when Wi-Fi cannot scan for networks -->
<string name="wifi_fail_to_scan">Can\'t scan for networks</string>
<!-- Do not translate. Concise terminology for wifi with WEP security -->
<string name="wifi_security_short_wep">WEP</string>
<!-- Do not translate. Concise terminology for wifi with WPA security -->
<string name="wifi_security_short_wpa">WPA</string>
<!-- Do not translate. Concise terminology for wifi with WPA2 security -->
<string name="wifi_security_short_wpa2">WPA2</string>
<!-- Do not translate. Concise terminology for wifi with both WPA/WPA2 security -->
<string name="wifi_security_short_wpa_wpa2">WPA/WPA2</string>
<!-- Do not translate. Concise terminology for wifi with unknown PSK type -->
<string name="wifi_security_short_psk_generic">@string/wifi_security_short_wpa_wpa2</string>
<!-- Do not translate. Concise terminology for wifi with 802.1x EAP security -->
<string name="wifi_security_short_eap">802.1x</string>
<!-- Used in Wi-Fi settings dialogs when Wi-Fi does not have any security. -->
<string name="wifi_security_none">None</string>
<!-- Do not translate. Terminology for wifi with WEP security -->
<string name="wifi_security_wep">WEP</string>
<!-- Do not translate. Terminology for wifi with WPA security -->
<string name="wifi_security_wpa">WPA PSK</string>
<!-- Do not translate. Terminology for wifi with WPA2 security -->
<string name="wifi_security_wpa2">WPA2 PSK</string>
<!-- Do not translate. Terminology for wifi with both WPA/WPA2 security, or unknown -->
<string name="wifi_security_wpa_wpa2">WPA/WPA2 PSK</string>
<!-- Do not translate. Terminology for wifi with unknown PSK type -->
<string name="wifi_security_psk_generic">@string/wifi_security_wpa_wpa2</string>
<!-- Do not translate. Concise terminology for wifi with 802.1x EAP security -->
<string name="wifi_security_eap">802.1x EAP</string>
<!-- Do not translate. Concise terminology for Passpoint network -->
<string name="wifi_security_passpoint">Passpoint</string>
<!-- Summary for the remembered network. -->
<string name="wifi_remembered">Saved</string>
<!-- Status for networks disabled for unknown reason -->
<string name="wifi_disabled_generic">Disabled</string>
<!-- Status for networked disabled from a DNS or DHCP failure -->
<string name="wifi_disabled_network_failure">IP Configuration Failure</string>
<!-- Status for networked disabled from a wifi association failure -->
<string name="wifi_disabled_wifi_failure">WiFi Connection Failure</string>
<!-- Status for networks disabled from authentication failure (wrong password
or certificate). -->
<string name="wifi_disabled_password_failure">Authentication problem</string>
<!-- Summary for the remembered network but currently not in range. -->
<string name="wifi_not_in_range">Not in range</string>
<!-- Summary for the network but no internet connection was detected. -->
<string name="wifi_no_internet_no_reconnect">No Internet Access Detected, won\'t automatically reconnect.</string>
<!-- Summary for the remembered network but no internet connection was detected. -->
<string name="wifi_no_internet">No Internet Access.</string>
<!-- Summary for saved networks -->
<string name="saved_network">Saved by <xliff:g id="name">%1$s</xliff:g></string>
<!-- Status message of Wi-Fi when it is connected by a Wi-Fi assistant application. [CHAR LIMIT=NONE] -->
<string name="connected_via_wfa">Connected via Wi\u2011Fi assistant</string>
<!-- Status message of Wi-Fi when it is connected by Passpoint configuration. [CHAR LIMIT=NONE] -->
<string name="connected_via_passpoint">Connected via %1$s</string>
<!-- Status message of Wi-Fi when network has matching passpoint credentials. [CHAR LIMIT=NONE] -->
<string name="available_via_passpoint">Available via %1$s</string>
<!-- Package name for Settings app-->
<string name="settings_package" translatable="false">com.android.settings</string>
<!-- Package name for Certinstaller app-->
<string name="certinstaller_package" translatable="false">com.android.certinstaller</string>
<!-- Summary for Connected wifi network without internet -->
<string name="wifi_connected_no_internet">Connected, no Internet</string>
<!-- Bluetooth settings. Message when a device is disconnected -->
<string name="bluetooth_disconnected">Disconnected</string>
<!-- Bluetooth settings. Message when disconnecting from a device -->
<string name="bluetooth_disconnecting">Disconnecting\u2026</string>
<!-- Bluetooth settings. Message when connecting to a device -->
<string name="bluetooth_connecting">Connecting\u2026</string>
<!-- Bluetooth settings. Message when connected to a device. [CHAR LIMIT=40] -->
<string name="bluetooth_connected">Connected</string>
<!--Bluetooth settings screen, summary text under individual Bluetooth devices when pairing -->
<string name="bluetooth_pairing">Pairing\u2026</string>
<!-- Bluetooth settings. Message when connected to a device, except for phone audio. [CHAR LIMIT=40] -->
<string name="bluetooth_connected_no_headset">Connected (no phone)</string>
<!-- Bluetooth settings. Message when connected to a device, except for media audio. [CHAR LIMIT=40] -->
<string name="bluetooth_connected_no_a2dp">Connected (no media)</string>
<!-- Bluetooth settings. Message when connected to a device, except for map. [CHAR LIMIT=40] -->
<string name="bluetooth_connected_no_map">Connected (no message access)</string>
<!-- Bluetooth settings. Message when connected to a device, except for phone/media audio. [CHAR LIMIT=40] -->
<string name="bluetooth_connected_no_headset_no_a2dp">Connected (no phone or media)</string>
<!-- Bluetooth settings. The user-visible string that is used whenever referring to the A2DP profile. -->
<string name="bluetooth_profile_a2dp">Media audio</string>
<!-- Bluetooth settings. The user-visible string that is used whenever referring to the headset or handsfree profile. -->
<string name="bluetooth_profile_headset">Phone audio</string>
<!-- Bluetooth settings. The user-visible string that is used whenever referring to the OPP profile. -->
<string name="bluetooth_profile_opp">File transfer</string>
<!-- Bluetooth settings. The user-visible string that is used whenever referring to the HID profile. -->
<string name="bluetooth_profile_hid">Input device</string>
<!-- Bluetooth settings. The user-visible string that is used whenever referring to the PAN profile (accessing Internet through remote device). [CHAR LIMIT=40] -->
<string name="bluetooth_profile_pan">Internet access</string>
<!-- Bluetooth settings. The user-visible string that is used whenever referring to the PBAP profile. [CHAR LIMIT=40] -->
<string name="bluetooth_profile_pbap">Contact sharing</string>
<!-- Bluetooth settings. The user-visible summary string that is used whenever referring to the PBAP profile (sharing contacts). [CHAR LIMIT=60] -->
<string name="bluetooth_profile_pbap_summary">Use for contact sharing</string>
<!-- Bluetooth settings. The user-visible string that is used whenever referring to the PAN profile (sharing this device's Internet connection). [CHAR LIMIT=40] -->
<string name="bluetooth_profile_pan_nap">Internet connection sharing</string>
<!-- Bluetooth settings. The user-visible string that is used whenever referring to the map profile. -->
<string name="bluetooth_profile_map">Message Access</string>
<!-- Bluetooth settings. The user-visible string that is used whenever referring to the SAP profile (sharing SIM card). -->
<string name="bluetooth_profile_sap">SIM Access</string>
<!-- Bluetooth settings. Connection options screen. The summary for the A2DP checkbox preference when A2DP is connected. -->
<string name="bluetooth_a2dp_profile_summary_connected">Connected to media audio</string>
<!-- Bluetooth settings. Connection options screen. The summary for the headset checkbox preference when headset is connected. -->
<string name="bluetooth_headset_profile_summary_connected">Connected to phone audio</string>
<!-- Bluetooth settings. Connection options screen. The summary for the OPP checkbox preference when OPP is connected. -->
<string name="bluetooth_opp_profile_summary_connected">Connected to file transfer server</string>
<!-- Bluetooth settings. Connection options screen. The summary for the map checkbox preference when map is connected. -->
<string name="bluetooth_map_profile_summary_connected">Connected to map</string>
<!-- Bluetooth settings. Connection options screen. The summary for the sap checkbox preference when SAP is connected. -->
<string name="bluetooth_sap_profile_summary_connected">Connected to SAP</string>
<!-- Bluetooth settings. Connection options screen. The summary for the OPP checkbox preference when OPP is not connected. -->
<string name="bluetooth_opp_profile_summary_not_connected">Not connected to file transfer server</string>
<!-- Bluetooth settings. Connection options screen. The summary for the HID checkbox preference when HID is connected. -->
<string name="bluetooth_hid_profile_summary_connected">Connected to input device</string>
<!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (user role). [CHAR LIMIT=25]-->
<string name="bluetooth_pan_user_profile_summary_connected">Connected to device for Internet access</string>
<!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (NAP role). [CHAR LIMIT=25]-->
<string name="bluetooth_pan_nap_profile_summary_connected">Sharing local Internet connection with device</string>
<!-- Bluetooth settings. Connection options screen. The summary
for the PAN checkbox preference that describes how checking it
will set the PAN profile as preferred. -->
<string name="bluetooth_pan_profile_summary_use_for">Use for Internet access</string>
<!-- Bluetooth settings. Connection options screen. The summary for the map checkbox preference that describes how checking it will set the map profile as preferred. -->
<string name="bluetooth_map_profile_summary_use_for">Use for map</string>
<!-- Bluetooth settings. Connection options screen. The summary for the sap checkbox preference that describes how checking it will set the sap profile as preferred. -->
<string name="bluetooth_sap_profile_summary_use_for">Use for SIM access</string>
<!-- Bluetooth settings. Connection options screen. The summary for the A2DP checkbox preference that describes how checking it will set the A2DP profile as preferred. -->
<string name="bluetooth_a2dp_profile_summary_use_for">Use for media audio</string>
<!-- Bluetooth settings. Connection options screen. The summary for the headset checkbox preference that describes how checking it will set the headset profile as preferred. -->
<string name="bluetooth_headset_profile_summary_use_for">Use for phone audio</string>
<!-- Bluetooth settings. Connection options screen. The summary for the OPP checkbox preference that describes how checking it will set the OPP profile as preferred. -->
<string name="bluetooth_opp_profile_summary_use_for">Use for file transfer</string>
<!-- Bluetooth settings. Connection options screen. The summary
for the HID checkbox preference that describes how checking it
will set the HID profile as preferred. -->
<string name="bluetooth_hid_profile_summary_use_for">Use for input</string>
<!-- Button text for accepting an incoming pairing request. [CHAR LIMIT=20] -->
<string name="bluetooth_pairing_accept">Pair</string>
<!-- Button text for accepting an incoming pairing request in all caps. [CHAR LIMIT=20] -->
<string name="bluetooth_pairing_accept_all_caps">PAIR</string>
<!-- Button text for declining an incoming pairing request. [CHAR LIMIT=20] -->
<string name="bluetooth_pairing_decline">Cancel</string>
<!-- Message in pairing dialogs. [CHAR LIMIT=NONE] -->
<string name="bluetooth_pairing_will_share_phonebook">Pairing grants access to your contacts and call history when connected.</string>
<!-- Message for the error dialog when BT pairing fails generically. -->
<string name="bluetooth_pairing_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g>.</string>
<!-- Message for the error dialog when BT pairing fails because the PIN /
Passkey entered is incorrect. -->
<string name="bluetooth_pairing_pin_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g> because of an incorrect PIN or passkey.</string>
<!-- Message for the error dialog when BT pairing fails because the other device is down. -->
<string name="bluetooth_pairing_device_down_error_message">Can\'t communicate with <xliff:g id="device_name">%1$s</xliff:g>.</string>
<!-- Message for the error dialog when BT pairing fails because the other device rejected the pairing. -->
<string name="bluetooth_pairing_rejected_error_message">Pairing rejected by <xliff:g id="device_name">%1$s</xliff:g>.</string>
<!-- Content description of the WIFI signal when WIFI is disabled for accessibility (not shown on the screen). [CHAR LIMIT=NONE] -->
<string name="accessibility_wifi_off">Wifi off.</string>
<!-- Content description of the WIFI signal when no signal for accessibility (not shown on the screen). [CHAR LIMIT=NONE] -->
<string name="accessibility_no_wifi">Wifi disconnected.</string>
<!-- Content description of the WIFI signal when it is one bar for accessibility (not shown on the screen). [CHAR LIMIT=NONE] -->
<string name="accessibility_wifi_one_bar">Wifi one bar.</string>
<!-- Content description of the WIFI signal when it is two bars for accessibility (not shown on the screen). [CHAR LIMIT=NONE] -->
<string name="accessibility_wifi_two_bars">Wifi two bars.</string>
<!-- Content description of the WIFI signal when it is three bars for accessibility (not shown on the screen). [CHAR LIMIT=NONE] -->
<string name="accessibility_wifi_three_bars">Wifi three bars.</string>
<!-- Content description of the WIFI signal when it is full for accessibility (not shown on the screen). [CHAR LIMIT=NONE] -->
<string name="accessibility_wifi_signal_full">Wifi signal full.</string>
<!-- Label for kernel threads in battery usage -->
<string name="process_kernel_label">Android OS</string>
<!-- Title of data usage item that represents all uninstalled applications. [CHAR LIMIT=48] -->
<string name="data_usage_uninstalled_apps">Removed apps</string>
<!-- Title of data usage item that represents all uninstalled applications or removed users. [CHAR LIMIT=48] -->
<string name="data_usage_uninstalled_apps_users">Removed apps and users</string>
<!-- Tethering controls, item title to go into the tethering settings -->
<!-- Tethering controls, item title to go into the tethering settings when only USB tethering is available [CHAR LIMIT=25]-->
<string name="tether_settings_title_usb">USB tethering</string>
<!-- Tethering controls, item title to go into the tethering settings when only Wifi tethering is available [CHAR LIMIT=25]-->
<string name="tether_settings_title_wifi">Portable hotspot</string>
<!-- Tethering controls, item title to go into the tethering settings when only Bluetooth tethering is available [CHAR LIMIT=25]-->
<string name="tether_settings_title_bluetooth">Bluetooth tethering</string>
<!-- Tethering controls, item title to go into the tethering settings when USB and Bluetooth tethering are available [CHAR LIMIT=25]-->
<string name="tether_settings_title_usb_bluetooth">Tethering</string>
<!-- Tethering controls, item title to go into the tethering settings when USB, Bluetooth and Wifi tethering are available [CHAR LIMIT=25]-->
<string name="tether_settings_title_all">Tethering & portable hotspot</string>
<!-- Title for a work profile. [CHAR LIMIT=25] -->
<string name="managed_user_title">All work apps</string>
<!-- Title for Guest user [CHAR LIMIT=35] -->
<string name="user_guest">Guest</string>
<!-- Manage apps, individual app screen, substituted for the application's label when the app's label CAN NOT be determined.-->
<string name="unknown">Unknown</string>
<!-- [CHAR LIMIT=NONE] Label of a running process that represents another user -->
<string name="running_process_item_user_label">User: <xliff:g id="user_name">%1$s</xliff:g></string>
<!-- Launch defaults preference summary with some set [CHAR LIMIT=40] -->
<string name="launch_defaults_some">Some defaults set</string>
<!-- Launch defaults preference summary with none set [CHAR LIMIT=40] -->
<string name="launch_defaults_none">No defaults set</string>
<!-- Text-To-Speech (TTS) settings --><skip />
<!-- Name of the TTS package as listed by the package manager. -->
<string name="tts_settings">Text-to-speech settings</string>
<!-- TTS option item name in the main settings screen -->
<string name="tts_settings_title">Text-to-speech output</string>
<!-- On main TTS Settings screen, in default settings section, setting default speech rate for synthesized voice -->
<string name="tts_default_rate_title">Speech rate</string>
<!-- On main TTS Settings screen, summary for default speech rate for synthesized voice -->
<string name="tts_default_rate_summary">Speed at which the text is spoken</string>
<!-- On main TTS Settings screen, in default settings section, setting default pitch for synthesized voice -->
<string name="tts_default_pitch_title">Pitch</string>
<!-- On main TTS Settings screen, summary for default pitch for synthesized voice -->
<string name="tts_default_pitch_summary">Affects the tone of the synthesized speech</string>
<!-- On main TTS Settings screen, in default settings section, setting default language for synthesized voice -->
<string name="tts_default_lang_title">Language</string>
<!-- Entry in the TTS engine language/locale picker, when selected will try to default to the system language [CHAR LIMIT=50] -->
<string name="tts_lang_use_system">Use system language</string>
<!-- On main TTS Settings screen, language summary if it can't default to system language [CHAR LIMIT=50] -->
<string name="tts_lang_not_selected">Language not selected</string>
<!-- On main TTS Settings screen, summary for default language for synthesized voice -->
<string name="tts_default_lang_summary">Sets the language-specific voice for the spoken text</string>
<!-- On main TTS Settings screen, triggers playback of an example of speech synthesis -->
<string name="tts_play_example_title">Listen to an example</string>
<!-- On main TTS Settings screen, summary for triggering playback of an example of speech synthesis -->
<string name="tts_play_example_summary">Play a short demonstration of speech synthesis</string>
<!-- On main TTS Settings screen, click to install required speech synthesis data -->
<string name="tts_install_data_title">Install voice data</string>
<!-- On main TTS Settings screen, summary for click to install required speech synthesis data -->
<string name="tts_install_data_summary">Install the voice data required for speech synthesis</string>
<!-- Warning message about security implications of enabling a TTS engine, displayed as a dialog
message when the user selects to enable an engine. -->
<string name="tts_engine_security_warning">This speech synthesis engine may be able to collect
all the text that will be spoken, including personal data like passwords and credit
card numbers. It comes from the <xliff:g id="tts_plugin_engine_name">%s</xliff:g> engine.
Enable the use of this speech synthesis engine?</string>
<!-- Warning message about required internet conectivity for TTS synthesis, displayed as a dialog
message when the user selects to play an example for network only locale and there's no internet connectivity. -->
<string name="tts_engine_network_required">This language requires a working network connection for text-to-speech output.</string>
<!-- Text spoken by the TTS engine as an example if the engine doesn't provide sample text [CHAR LIMIT=100] -->
<string name="tts_default_sample_string">This is an example of speech synthesis</string>
<!-- On main TTS Settings screen, title of a field explaining current TTS engine status for
current default language [CHAR LIMIT=50] -->
<string name="tts_status_title">Default language status</string>
<!-- On main TTS Settings screen, current TTS engine status for the current default language,
selected language is fully supported by the engine [CHAR LIMIT=150]-->
<string name="tts_status_ok"><xliff:g id="locale" example="English (United States)">%1$s</xliff:g> is fully supported</string>
<!-- On main TTS Settings screen, current TTS engine status for the current default language,
selected language is supported by the engine only if there's a working network connection [CHAR LIMIT=150] -->
<string name="tts_status_requires_network"><xliff:g id="locale" example="English (United States)">%1$s</xliff:g> requires network connection</string>
<!-- On main TTS Settings screen, current TTS engine status for the current default language,
selected language is not supported by the engine [CHAR LIMIT=150] -->
<string name="tts_status_not_supported"><xliff:g id="locale" example="English (United States)">%1$s</xliff:g> is not supported</string>
<!-- On main TTS Settings screen, current TTS engine status for the current default language,
tts engine is queried for status [CHAR LIMIT=150] -->
<string name="tts_status_checking">Checking…</string>
<!-- Title for a preference in the main TTS settings screen, which
launches the settings screen for a given TTS engine when clicked
[CHAR LIMIT=30]-->
<string name="tts_engine_settings_title">Settings for <xliff:g id="tts_engine_name">%s</xliff:g></string>
<!-- [CHAR LIMIT=150] Text for screen readers / accessibility programs for
the image that launches the TTS engine settings when clicked. -->
<string name="tts_engine_settings_button">Launch engine settings</string>
<!-- [CHAR LIMIT=50] The text for the settings section that users to set a
preferred text to speech engine -->
<string name="tts_engine_preference_section_title">Preferred engine</string>
<!-- [CHAR LIMIT=50] Title of the settings section that displays general preferences
that are applicable to all engines, such as the speech rate -->
<string name="tts_general_section_title">General</string>
<!-- On main TTS Settings screen, in default settings section,
reset speech pitch of synthesized voice to 1x speech pitch. [CHAR LIMIT=50] -->
<string name="tts_reset_speech_pitch_title">Reset speech pitch</string>
<!--On main TTS Settings screen, summary for reset speech pitch of synthesized voice [CHAR LIMIT=150] -->
<string name="tts_reset_speech_pitch_summary">Reset the pitch at which the text is spoken to default.</string>
<!-- Default speech rate choices -->
<string-array name="tts_rate_entries">
<item>Very slow</item>
<item>Slow</item>
<item>Normal</item>
<item>Fast</item>
<item>Faster</item>
<item>Very fast</item>
<item>Rapid</item>
<item>Very rapid</item>
<item>Fastest</item>
</string-array>
<!-- Do not translate. -->
<string-array name="tts_rate_values">
<item>60</item>
<item>80</item>
<item>100</item>
<item>150</item>
<item>200</item>
<item>250</item>
<item>300</item>
<item>350</item>
<item>400</item>
</string-array>
<!-- Do not translate. -->
<string-array name="tts_demo_strings" translatable="false">
<item>This is an example of speech synthesis in English.</item>
<item>Voici un échantillon de synthèse vocale en français.</item>
<item>Dies ist ein Beispiel für Sprachsynthese in Deutsch.</item>
<item>Questo è un esempio di sintesi vocale in italiano.</item>
<item>Este es un ejemplo de síntesis de voz en español.</item>
<item>이것은 한국어 음성 합성의 예입니다.</item>
</string-array>
<!-- Do not translate. -->
<string-array name="tts_demo_string_langs" translatable="false">
<item>eng</item>
<item>fra</item>
<item>deu</item>
<item>ita</item>
<item>spa</item>
<item>kor</item>
</string-array>
<!-- Title for profile selection dialog [CHAR LIMIT=30] -->
<string name="choose_profile">Choose Profile</string>
<!-- Header for items under the personal user [CHAR LIMIT=30] -->
<string name="category_personal">Personal</string>
<!-- Header for items under the work user [CHAR LIMIT=30] -->
<string name="category_work">Work</string>
<!-- Full package name of OEM preferred device feedback reporter. Leave this blank, overlaid in Settings/TvSettings [DO NOT TRANSLATE] -->
<string name="oem_preferred_feedback_reporter" translatable="false" />
<!-- Development settings -->
<skip/>
<!-- Development Settings. the title for the item to take the user to Development settings. Development settings are settings meant for application developers. -->
<string name="development_settings_title">Developer options</string>
<!-- Development settings enable title. -->
<string name="development_settings_enable">Enable developer options</string>
<!-- Development Settings summary. The summary of the item to take the user to Development settings. Development settings are settings meant for application developers. -->
<string name="development_settings_summary">Set options for app development</string>
<!-- Setting checkbox title for Whether to enable USB debugging support on the phone. -->
<!-- Error message for users that aren't allowed to modify developer options [CHAR LIMIT=none] -->
<string name="development_settings_not_available">Developer options are not available for this user</string>
<!-- Error message for users that aren't allowed to modify VPN settings [CHAR LIMIT=none] -->
<string name="vpn_settings_not_available">VPN settings are not available for this user</string>
<!-- Error message for users that aren't allowed to modify Tethering settings [CHAR LIMIT=none] -->
<string name="tethering_settings_not_available">Tethering settings are not available for this user</string>
<!-- Error message for users that aren't allowed to modify Access Point Names settings [CHAR LIMIT=none] -->
<string name="apn_settings_not_available">Access Point Name settings are not available for this user</string>
<string name="enable_adb">USB debugging</string>
<!-- Setting checkbox summary for Whether to enable USB debugging support on the phone -->
<string name="enable_adb_summary">Debug mode when USB is connected</string>
<!-- Setting title to revoke secure USB debugging authorizations -->
<string name="clear_adb_keys">Revoke USB debugging authorizations</string>
<!-- [CHAR LIMIT=NONE] Setting checkbox title for Whether to include bug report item in power menu. -->
<string name="bugreport_in_power">Bug report shortcut</string>
<!-- [CHAR LIMIT=NONE] Setting checkbox summary for Whether to include bug report item in power -->
<string name="bugreport_in_power_summary">Show a button in the power menu for taking a bug report</string>
<!-- Setting Checkbox title whether to keep the screen on when plugged in to a power source -->
<string name="keep_screen_on">Stay awake</string>
<!-- setting Checkbox summary whether to keep the screen on when plugged in -->
<string name="keep_screen_on_summary">Screen will never sleep while charging</string>
<!-- Setting Checkbox title whether to enable bluetooth HCI snoop log -->
<string name="bt_hci_snoop_log">Enable Bluetooth HCI snoop log</string>
<!-- setting Checkbox summary whether to capture all bluetooth HCI packets in a file -->
<string name="bt_hci_snoop_log_summary">Capture all bluetooth HCI packets in a file</string>
<!-- setting Checkbox title whether to enable OEM unlock [CHAR_LIMIT=35] -->
<string name="oem_unlock_enable">OEM unlocking</string>
<!-- setting Checkbox summary whether to enable OEM unlock [CHAR_LIMIT=50] -->
<string name="oem_unlock_enable_summary">Allow the bootloader to be unlocked</string>
<!-- Confirmation dialog title to ensure user wishes to enable OEM unlock and disable theft protection features -->
<string name="confirm_enable_oem_unlock_title">Allow OEM unlocking?</string>
<!-- Warning dialog message to confirm user wishes to enable OEM unlock and disable theft protection features -->
<string name="confirm_enable_oem_unlock_text">WARNING: Device protection features will not work on this device while this setting is turned on.</string>
<!-- UI debug setting: select current app to mock location [CHAR LIMIT=50] -->
<string name="mock_location_app">Select mock location app</string>
<!-- UI debug setting: no mock location app has been set [CHAR LIMIT=50] -->
<string name="mock_location_app_not_set">No mock location app set</string>
<!-- UI debug setting: mock location app has been set [CHAR LIMIT=50] -->
<string name="mock_location_app_set">Mock location app: <xliff:g id="app_name">%1$s</xliff:g></string>
<!-- Preference category for networking debugging development settings. [CHAR LIMIT=50] -->
<string name="debug_networking_category">Networking</string>
<!-- Setting Checkbox title whether to show options for wireless display certification -->
<string name="wifi_display_certification">Wireless display certification</string>
<!-- Setting Checkbox title whether to enable WiFi Verbose Logging. [CHAR LIMIT=40] -->
<string name="wifi_verbose_logging">Enable Wi\u2011Fi Verbose Logging</string>
<!-- Setting Checkbox title whether to enable WiFi Aggressive Handover. [CHAR LIMIT=40] -->
<string name="wifi_aggressive_handover">Aggressive Wi\u2011Fi to Cellular handover</string>
<!-- Setting Checkbox title whether to enable WiFi Scanning in the presence of traffic. [CHAR LIMIT=80] -->
<string name="wifi_allow_scan_with_traffic">Always allow Wi\u2011Fi Roam Scans</string>
<!-- Setting Checkbox title whether to always keep cellular data active. [CHAR LIMIT=80] -->
<string name="mobile_data_always_on">Cellular data always active</string>
<!-- Setting Checkbox title for disabling Bluetooth absolute volume -->
<string name="bluetooth_disable_absolute_volume">Disable absolute volume</string>
<!-- setting Checkbox summary whether to show options for wireless display certification -->
<string name="wifi_display_certification_summary">Show options for wireless display certification</string>
<!-- Setting Checkbox summary whether to enable Wifi verbose Logging [CHAR LIMIT=80] -->
<string name="wifi_verbose_logging_summary">Increase Wi\u2011Fi logging level, show per SSID RSSI in Wi\u2011Fi Picker</string>
<!-- Setting Checkbox summary whether to enable Wifi aggressive handover [CHAR LIMIT=130] -->
<string name="wifi_aggressive_handover_summary">When enabled, Wi\u2011Fi will be more aggressive in handing over the data connection to Cellular, when Wi\u2011Fi signal is low</string>
<!-- Setting Checkbox summary whether to always allow WiFi Roam Scans [CHAR LIMIT=130] -->
<string name="wifi_allow_scan_with_traffic_summary">Allow/Disallow Wi\u2011Fi Roam Scans based on the amount of data traffic present at the interface</string>
<!-- UI debug setting: limit size of Android logger buffers -->
<string name="select_logd_size_title">Logger buffer sizes</string>
<!-- UI debug setting: limit size of Android logger buffers [CHAR LIMIT=59] -->
<string name="select_logd_size_dialog_title">Select Logger sizes per log buffer</string>
<!-- UI debug setting: store logs persistently -->
<string name="dev_logpersist_clear_warning_title">Clear logger persistent storage?</string>
<!-- Warning text to user about the implications of enabling USB debugging -->
<string name="dev_logpersist_clear_warning_message">When we no longer are monitoring with the persistent logger, we are required to erase the logger data resident on your device.</string>
<!-- Title of checkbox setting to perform package verification on apps installed over USB/ADT/ADB [CHAR LIMIT=32] -->
<string name="select_logpersist_title">Store logger data persistently on device</string>
<!-- UI debug setting: select which logs to store persistently [CHAR LIMIT=80] -->
<string name="select_logpersist_dialog_title">Select log buffers to store persistently on device</string>
<!-- UI debug setting: select USB configuration -->
<string name="select_usb_configuration_title">Select USB Configuration</string>
<!-- UI debug setting: limit size of Android logger buffers [CHAR LIMIT=59] -->
<string name="select_usb_configuration_dialog_title">Select USB Configuration</string>
<!-- Setting Checkbox title whether to allow mock locations -->
<string name="allow_mock_location">Allow mock locations</string>
<!-- setting Checkbox summary whether to allow mock locations -->
<string name="allow_mock_location_summary">Allow mock locations</string>
<!-- Setting Checkbox title whether to enable view attribute inspection -->
<string name="debug_view_attributes">Enable view attribute inspection</string>
<string name="mobile_data_always_on_summary">Always keep mobile data active, even when Wi\u2011Fi is active (for fast network switching).</string>
<!-- Title of warning dialog about the implications of enabling USB debugging -->
<string name="adb_warning_title">Allow USB debugging?</string>
<!-- Warning text to user about the implications of enabling USB debugging -->
<string name="adb_warning_message">USB debugging is intended for development purposes only. Use it to copy data between your computer and your device, install apps on your device without notification, and read log data.</string>
<!-- Message of dialog confirming that user wants to revoke access to adb from all computers they have authorized -->
<string name="adb_keys_warning_message">Revoke access to USB debugging from all computers you\u2019ve previously authorized?</string>
<!-- Title of warning dialog about the implications of enabling developer settings -->
<string name="dev_settings_warning_title">Allow development settings?</string>
<!-- Warning text to user about the implications of enabling USB debugging -->
<string name="dev_settings_warning_message">These settings are intended for development use only. They can cause your device and the applications on it to break or misbehave.</string>
<!-- Title of checkbox setting to perform package verification on apps installed over USB/ADT/ADB [CHAR LIMIT=32] -->
<string name="verify_apps_over_usb_title">Verify apps over USB</string>
<!-- Summary of checkbox setting to perform package verification on apps installed over USB/ADT/ADB [CHAR LIMIT=NONE] -->
<string name="verify_apps_over_usb_summary">Check apps installed via ADB/ADT for harmful behavior.</string>
<!-- Summary of checkbox for disabling Bluetooth absolute volume -->
<string name="bluetooth_disable_absolute_volume_summary">Disables the Bluetooth absolute volume feature in case of volume issues with remote devices such as unacceptably loud volume or lack of control.</string>
<!-- Title of checkbox setting that enables the terminal app. [CHAR LIMIT=32] -->
<string name="enable_terminal_title">Local terminal</string>
<!-- Summary of checkbox setting that enables the terminal app. [CHAR LIMIT=64] -->
<string name="enable_terminal_summary">Enable terminal app that offers local shell access</string>
<!-- HDCP checking title, used for debug purposes only. [CHAR LIMIT=25] -->
<string name="hdcp_checking_title">HDCP checking</string>
<!-- HDCP checking dialog title, used for debug purposes only. [CHAR LIMIT=25] -->
<string name="hdcp_checking_dialog_title">Set HDCP checking behavior</string>
<!-- Preference category for app debugging development settings. [CHAR LIMIT=50] -->
<string name="debug_debugging_category">Debugging</string>
<!-- UI debug setting: select current app to debug [CHAR LIMIT=50] -->
<string name="debug_app">Select debug app</string>
<!-- UI debug setting: no debug app has been set [CHAR LIMIT=50] -->
<string name="debug_app_not_set">No debug application set</string>
<!-- UI debug setting: debug app has been set [CHAR LIMIT=50] -->
<string name="debug_app_set">Debugging application: <xliff:g id="app_name">%1$s</xliff:g></string>
<!-- UI debug setting: title for app picker dialog [CHAR LIMIT=50] -->
<string name="select_application">Select application</string>
<!-- UI debug setting: label for app picker to select no applicatiojn [CHAR LIMIT=50] -->
<string name="no_application">Nothing</string>
<!-- UI debug setting: wait for debugger to attach to debugging process? [CHAR LIMIT=50] -->
<string name="wait_for_debugger">Wait for debugger</string>
<!-- UI debug setting: wait for debugger to attach to debugging process summary [CHAR LIMIT=500] -->
<string name="wait_for_debugger_summary">Debugged application waits for debugger to
attach before executing</string>
<!-- Preference category for input debugging development settings. [CHAR LIMIT=25] -->
<string name="debug_input_category">Input</string>
<!-- Preference category for drawing debugging development settings. [CHAR LIMIT=25] -->
<string name="debug_drawing_category">Drawing</string>
<!-- Preference category for hardware accelerated drawing debugging development settings. [CHAR LIMIT=50] -->
<string name="debug_hw_drawing_category">Hardware accelerated rendering</string>
<!-- Preference category for media development settings. [CHAR LIMIT=50] -->
<string name="media_category">Media</string>
<!-- Preference category for monitoring debugging development settings. [CHAR LIMIT=25] -->
<string name="debug_monitoring_category">Monitoring</string>
<!-- UI debug setting: always enable strict mode? [CHAR LIMIT=25] -->
<string name="strict_mode">Strict mode enabled</string>
<!-- UI debug setting: show strict mode summary [CHAR LIMIT=50] -->
<string name="strict_mode_summary">Flash screen when apps do long operations
on main thread</string>
<!-- UI debug setting: show pointer location? [CHAR LIMIT=25] -->
<string name="pointer_location">Pointer location</string>
<!-- UI debug setting: show pointer location summary [CHAR LIMIT=50] -->
<string name="pointer_location_summary">Screen overlay showing current touch data</string>
<!-- UI debug setting: show touches? [CHAR LIMIT=25] -->
<string name="show_touches">Show taps</string>
<!-- UI debug setting: show touches location summary [CHAR LIMIT=50] -->
<string name="show_touches_summary">Show visual feedback for taps</string>
<!-- UI debug setting: show where surface updates happen? [CHAR LIMIT=25] -->
<string name="show_screen_updates">Show surface updates</string>
<!-- UI debug setting: show surface updates summary [CHAR LIMIT=50] -->
<string name="show_screen_updates_summary">Flash entire window surfaces when they update</string>
<!-- UI debug setting: show where window updates happen with GPU rendering? [CHAR LIMIT=25] -->
<string name="show_hw_screen_updates">Show GPU view updates</string>
<!-- UI debug setting: show GPU rendering screen updates summary [CHAR LIMIT=50] -->
<string name="show_hw_screen_updates_summary">Flash views inside windows when drawn with the GPU</string>
<!-- UI debug setting: show when hardware layers get updated [CHAR LIMIT=25] -->
<string name="show_hw_layers_updates">Show hardware layers updates</string>
<!-- UI debug setting: show hardware layers updates summary [CHAR LIMIT=50] -->
<string name="show_hw_layers_updates_summary">Flash hardware layers green when they update</string>
<!-- UI debug setting: show the amount of overdraw in apps using the GPU [CHAR LIMIT=25] -->
<string name="debug_hw_overdraw">Debug GPU overdraw</string>
<!-- UI debug setting: disable use of overlays? [CHAR LIMIT=25] -->
<string name="disable_overlays">Disable HW overlays</string>
<!-- UI debug setting: disable use of overlays summary [CHAR LIMIT=50] -->
<string name="disable_overlays_summary">Always use GPU for screen compositing</string>
<!-- UI debug setting: simulate color space anomalies. [CHAR LIMIT=25] -->
<string name="simulate_color_space">Simulate color space</string>
<!-- UI debug setting: enable various types of OpenGL traces [CHAR LIMIT=25] -->
<string name="enable_opengl_traces_title">Enable OpenGL traces</string>
<!-- UI debug setting: disable USB audio routing title [CHAR LIMIT=32] -->
<string name="usb_audio_disable_routing">Disable USB audio routing</string>
<!-- UI debug setting: disable USB audio routing summary [CHAR LIMIT=50] -->
<string name="usb_audio_disable_routing_summary">Disable automatic routing to USB audio peripherals</string>
<!-- UI debug setting: show layout bounds information [CHAR LIMIT=25] -->
<string name="debug_layout">Show layout bounds</string>
<!-- UI debug setting: show layout bounds information summary [CHAR LIMIT=50] -->
<string name="debug_layout_summary">Show clip bounds, margins, etc.</string>
<!-- UI debug setting: force right to left layout [CHAR LIMIT=37] -->
<string name="force_rtl_layout_all_locales">Force RTL layout direction</string>
<!-- UI debug setting: force right to left layout summary [CHAR LIMIT=100] -->
<string name="force_rtl_layout_all_locales_summary">Force screen layout direction to RTL for all locales</string>
<!-- UI debug setting: force hardware acceleration to render apps [CHAR LIMIT=25] -->
<string name="force_hw_ui">Force GPU rendering</string>
<!-- UI debug setting: force hardware acceleration summary [CHAR LIMIT=50] -->
<string name="force_hw_ui_summary">Force use of GPU for 2d drawing</string>
<!-- UI debug setting: force anti-aliasing to render apps [CHAR LIMIT=25] -->
<string name="force_msaa">Force 4x MSAA</string>
<!-- UI debug setting: force anti-aliasing summary [CHAR LIMIT=50] -->
<string name="force_msaa_summary">Enable 4x MSAA in OpenGL ES 2.0 apps</string>
<!-- UI debug setting: show when non-rectangular clip operations are used [CHAR LIMIT=100] -->
<string name="show_non_rect_clip">Debug non-rectangular clip operations</string>
<!-- UI debug setting: profile time taken by hardware acceleration to render apps [CHAR LIMIT=25] -->
<string name="track_frame_time">Profile GPU rendering</string>
<!-- UI debug setting: scaling factor for window animations [CHAR LIMIT=25] -->
<string name="window_animation_scale_title">Window animation scale</string>
<!-- UI debug setting: scaling factor for transition animations [CHAR LIMIT=25] -->
<string name="transition_animation_scale_title">Transition animation scale</string>
<!-- UI debug setting: scaling factor for all Animator-based animations [CHAR LIMIT=25] -->
<string name="animator_duration_scale_title">Animator duration scale</string>
<!-- UI debug setting: simulate secondary display devices using overlays [CHAR LIMIT=25] -->
<string name="overlay_display_devices_title">Simulate secondary displays</string>
<!-- Preference category for application debugging development settings. [CHAR LIMIT=25] -->
<string name="debug_applications_category">Apps</string>
<!-- UI debug setting: immediately destroy activities? [CHAR LIMIT=25] -->
<string name="immediately_destroy_activities">Don\u2019t keep activities</string>
<!-- UI debug setting: immediately destroy activities summary [CHAR LIMIT=50] -->
<string name="immediately_destroy_activities_summary">Destroy every activity as soon as
the user leaves it</string>
<!-- UI debug setting: limit number of running background processes [CHAR LIMIT=25] -->
<string name="app_process_limit_title">Background process limit</string>
<!-- UI debug setting: show all ANRs? [CHAR LIMIT=25] -->
<string name="show_all_anrs">Show all ANRs</string>
<!-- UI debug setting: show all ANRs summary [CHAR LIMIT=50] -->
<string name="show_all_anrs_summary">Show App Not Responding dialog
for background apps</string>
<!-- UI debug setting: force allow apps on external storage [CHAR LIMIT=50] -->
<string name="force_allow_on_external">Force allow apps on external</string>
<!-- UI debug setting: force allow on external summary [CHAR LIMIT=150] -->
<string name="force_allow_on_external_summary">Makes any app eligible to be written to external storage, regardless of manifest values</string>
<!-- UI debug setting: force all activites to be resizable for multiwindow [CHAR LIMIT=50] -->
<string name="force_resizable_activities">Force activities to be resizable</string>
<!-- UI debug setting: force allow on external summary [CHAR LIMIT=150] -->
<string name="force_resizable_activities_summary">Make all activities resizable for multi-window, regardless of manifest values.</string>
<!-- UI debug setting: enable freeform window support [CHAR LIMIT=50] -->
<string name="enable_freeform_support">Enable freeform windows</string>
<!-- UI debug setting: enable freeform window support summary [CHAR LIMIT=150] -->
<string name="enable_freeform_support_summary">Enable support for experimental freeform windows.</string>
<!-- Local (desktop) backup password menu title [CHAR LIMIT=25] -->
<string name="local_backup_password_title">Desktop backup password</string>
<!-- Summary text of the "local backup password" setting when the user has not supplied a password -->
<string name="local_backup_password_summary_none">Desktop full backups aren\u2019t currently protected</string>
<!-- Summary text of the "local backup password" setting when the user has already supplied a password -->
<string name="local_backup_password_summary_change">Tap to change or remove the password for desktop full backups</string>
<!-- Toast message shown when the user successfully sets a new local backup password [CHAR LIMIT=80] -->
<string name="local_backup_password_toast_success">New backup password set</string>
<!-- Toast message shown when setting a new local backup password fails due to the user not correctly typing the password again for confirmation [CHAR LIMIT=80] -->
<string name="local_backup_password_toast_confirmation_mismatch">New password and confirmation don\u2019t match</string>
<!-- Toast message shown when setting a new local backup password fails due to the user not supplying the correct existing password. The phrasing here is deliberately quite general. [CHAR LIMIT=80] -->
<string name="local_backup_password_toast_validation_failure">Failure setting backup password</string>
<!-- Name of each color mode for the display. [CHAR LIMIT=40] -->
<string-array name="color_mode_names">
<item>Vibrant (default)</item>
<item>Natural</item>
<item>Standard</item>
</string-array>
<!-- Description of each color mode for the display. [CHAR LIMIT=NONE] -->
<string-array name="color_mode_descriptions">
<item>Enhanced colors</item>
<item>Natural colors as seen by the eye</item>
<item>Colors optimized for digital content</item>
</string-array>
<!-- Settings item title for inactive apps [CHAR LIMIT=35] -->
<string name="inactive_apps_title">Inactive apps</string>
<!-- Settings item summary for inactive app [CHAR LIMIT=100] -->
<string name="inactive_app_inactive_summary">Inactive. Tap to toggle.</string>
<!-- Settings item summary for active app [CHAR LIMIT=100] -->
<string name="inactive_app_active_summary">Active. Tap to toggle.</string>
<!-- Services settings screen, setting option name for the user to go to the screen to view running services -->
<string name="runningservices_settings_title">Running services</string>
<!-- Services settings screen, setting option summary for the user to go to the screen to view running services -->
<string name="runningservices_settings_summary">View and control currently running services</string>
<!-- Developer settings: enable WebView multiprocess name [CHAR LIMIT=50] -->
<string name="enable_webview_multiprocess">Multiprocess WebView</string>
<!-- Developer settings: enable WebView multiprocess summary [CHAR LIMIT=60] -->
<string name="enable_webview_multiprocess_desc">Run WebView renderers separately</string>
<!-- Developer settings: select WebView provider title [CHAR LIMIT=30] -->
<string name="select_webview_provider_title">WebView implementation</string>
<!-- Developer settings: select WebView provider dialog title [CHAR LIMIT=30] -->
<string name="select_webview_provider_dialog_title">Set WebView implementation</string>
<!-- Developer settings: text for the WebView provider selection toast shown if an invalid provider was chosen (i.e. the setting list was stale). [CHAR LIMIT=NONE] -->
<string name="select_webview_provider_toast_text">This choice is no longer valid. Try again.</string>
<!-- Developer settings screen, convert userdata to file encryption option name -->
<string name="convert_to_file_encryption">Convert to file encryption</string>
<!-- Developer settings screen, convert userdata to file encryption summary when option is available -->
<string name="convert_to_file_encryption_enabled">Convert\u2026</string>
<!-- Developer settings screen, convert userdata to file encryption summary when option is already done -->
<string name="convert_to_file_encryption_done">Already file encrypted</string>
<!-- Title used on dialog with final prompt for converting to file encryption -->
<string name="title_convert_fbe">Converting to file based encryption</string>
<!-- Warning displayed on dialog with final prompt for converting to file encryption -->
<string name="convert_to_fbe_warning">
Convert data partition to file based encryption.\n
!!Warning!! This will erase all your data.\n
This feature is alpha, and may not work correctly.\n
Press \'Wipe and convert\u2026\' to continue.</string>
<!-- Button on dialog that triggers convertion to file encryption -->
<string name="button_convert_fbe">Wipe and convert\u2026</string>
<!-- Name of feature to change color setting for the display [CHAR LIMIT=60] -->
<string name="picture_color_mode">Picture color mode</string>
<!-- Description of feature to change color setting for the display [CHAR LIMIT=NONE] -->
<string name="picture_color_mode_desc">Use sRGB</string>
<!-- Label for disabling color space adjustment [CHAR LIMIT=45] -->
<string name="daltonizer_mode_disabled">Disabled</string>
<!-- Label for converting display colors to grayscale, which simulates monochromacy (complete color blindness). [CHAR LIMIT=45] -->
<string name="daltonizer_mode_monochromacy">Monochromacy</string>
<!-- Label for deuteranomaly (red-green color blindness) [CHAR LIMIT=45] -->
<string name="daltonizer_mode_deuteranomaly">Deuteranomaly (red-green)</string>
<!-- Label for protanomaly (red-green color blindness) [CHAR LIMIT=45] -->
<string name="daltonizer_mode_protanomaly">Protanomaly (red-green)</string>
<!-- Label for tritanomaly (blue-yellow color blindness) [CHAR LIMIT=45] -->
<string name="daltonizer_mode_tritanomaly">Tritanomaly (blue-yellow)</string>
<!-- Title for the accessibility preference to configure display color space correction. [CHAR LIMIT=NONE] -->
<string name="accessibility_display_daltonizer_preference_title">Color correction</string>
<!-- Subtitle for the accessibility preference to configure display color space correction. [CHAR LIMIT=NONE] -->
<string name="accessibility_display_daltonizer_preference_subtitle">This feature is experimental and may affect performance.</string>
<!-- Summary shown for color space correction preference when its value is overridden by another preference [CHAR LIMIT=35] -->
<string name="daltonizer_type_overridden">Overridden by <xliff:g id="title" example="Simulate color space">%1$s</xliff:g></string>
<!-- [CHAR_LIMIT=40] Label for estimated remaining duration of battery charging/discharging -->
<string name="power_remaining_duration_only">Approx. <xliff:g id="time">%1$s</xliff:g> left</string>
<!-- [CHAR_LIMIT=40] Short label for estimated remaining duration of battery charging/discharging -->
<string name="power_remaining_duration_only_short"><xliff:g id="time">%1$s</xliff:g> left</string>
<!-- [CHAR_LIMIT=40] Label for battery level chart when discharging with duration -->
<string name="power_discharging_duration"><xliff:g id="level">%1$s</xliff:g>
- approx. <xliff:g id="time">%2$s</xliff:g> left</string>
<!-- [CHAR_LIMIT=40] Label for battery level chart when discharging with duration -->
<string name="power_discharging_duration_short"><xliff:g id="level">%1$s</xliff:g>
- <xliff:g id="time">%2$s</xliff:g> left</string>
<!-- [CHAR_LIMIT=40] Label for battery level chart when charging -->
<string name="power_charging"><xliff:g id="level">%1$s</xliff:g> -
<xliff:g id="state">%2$s</xliff:g></string>
<!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration -->
<string name="power_charging_duration"><xliff:g id="level">%1$s</xliff:g> -
<xliff:g id="time">%2$s</xliff:g> until full</string>
<!-- [CHAR_LIMIT=40] Short label for battery level chart when charging with duration -->
<string name="power_charging_duration_short"><xliff:g id="level">%1$s</xliff:g> -
<xliff:g id="time">%2$s</xliff:g></string>
<!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration -->
<string name="power_charging_duration_ac"><xliff:g id="level">%1$s</xliff:g> -
<xliff:g id="time">%2$s</xliff:g> until full on AC</string>
<!-- [CHAR_LIMIT=40] Short label for battery level chart when charging with duration -->
<string name="power_charging_duration_ac_short"><xliff:g id="level">%1$s</xliff:g> -
<xliff:g id="time">%2$s</xliff:g></string>
<!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration -->
<string name="power_charging_duration_usb"><xliff:g id="level">%1$s</xliff:g> -
<xliff:g id="time">%2$s</xliff:g> until full over USB</string>
<!-- [CHAR_LIMIT=40] Short label for battery level chart when charging with duration -->
<string name="power_charging_duration_usb_short"><xliff:g id="level">%1$s</xliff:g> -
<xliff:g id="time">%2$s</xliff:g></string>
<!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration -->
<string name="power_charging_duration_wireless"><xliff:g id="level">%1$s</xliff:g> -
<xliff:g id="time">%2$s</xliff:g> until full from wireless</string>
<!-- [CHAR_LIMIT=40] Label for battery level chart when charging with duration -->
<string name="power_charging_duration_wireless_short"><xliff:g id="level">%1$s</xliff:g> -
<xliff:g id="time">%2$s</xliff:g></string>
<!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="battery_info_status_unknown">Unknown</string>
<!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging from an unknown source. -->
<string name="battery_info_status_charging">Charging</string>
<!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging on AC. -->
<string name="battery_info_status_charging_ac">Charging on AC</string>
<!-- [CHAR_LIMIT=20] Battery short status label when charing on AC -->
<string name="battery_info_status_charging_ac_short">Charging</string>
<!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging over USB. -->
<string name="battery_info_status_charging_usb">Charging over USB</string>
<!-- [CHAR_LIMIT=20] Battery short status label when charging over USB. -->
<string name="battery_info_status_charging_usb_short">Charging</string>
<!-- [CHAR_LIMIT=20] Battery use screen. Battery status shown in chart label when charging over a wireless connection. -->
<string name="battery_info_status_charging_wireless">Charging wirelessly</string>
<!-- [CHAR_LIMIT=20] Battery short status label when charging wirelessly. -->
<string name="battery_info_status_charging_wireless_short">Charging</string>
<!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="battery_info_status_discharging">Not charging</string>
<!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="battery_info_status_not_charging">Not charging</string>
<!-- Battery Info screen. Value for a status item. Used for diagnostic info screens, precise translation isn't needed -->
<string name="battery_info_status_full">Full</string>
<!-- Summary for settings preference disabled by administrator [CHAR LIMIT=50] -->
<string name="disabled_by_admin_summary_text">Controlled by admin</string>
<!-- Summary for switch preference to denote it is switched on [CHAR LIMIT=50] -->
<string name="enabled_by_admin">Enabled by administrator</string>
<!-- Summary for switch preference to denote it is switched off [CHAR LIMIT=50] -->
<string name="disabled_by_admin">Disabled by administrator</string>
<!-- Option in navigation drawer that leads to Settings main screen [CHAR LIMIT=30] -->
<string name="home">Settings Home</string>
<!-- Labels on the side of batter graph in Quick Settings and Settings [CHAR LIMIT=8] -->
<string-array name="battery_labels">
<item>0%</item>
<item>50%</item>
<item>100%</item>
</string-array>
<!-- Label for length of time since the battery graph started [CHAR LIMIT=20] -->
<string name="charge_length_format"><xliff:g name="time" example="3 hours">%1$s</xliff:g> ago</string>
<!-- Label for length of time until battery is charged [CHAR LIMIT=20] -->
<string name="remaining_length_format"><xliff:g name="time" example="3 hours">%1$s</xliff:g> left</string>
<!-- Hint text for the IP address -->
<string name="wifi_ip_address_hint" translatable="false">192.168.1.128</string>
<!-- Hint text for DNS -->
<string name="wifi_dns1_hint" translatable="false">8.8.8.8</string>
<!-- Hint text for DNS -->
<string name="wifi_dns2_hint" translatable="false">8.8.4.4</string>
<!-- Hint text for the gateway -->
<string name="wifi_gateway_hint" translatable="false">192.168.1.1</string>
<!-- Hint text for network prefix length -->
<string name="wifi_network_prefix_length_hint" translatable="false">24</string>
<!-- HTTP proxy settings. The hint text field for port. -->
<string name="proxy_port_hint" translatable="false">8080</string>
<!-- HTTP proxy settings. Hint for Proxy-Auto Config URL. -->
<string name="proxy_url_hint" translatable="false">https://www.example.com/proxy.pac</string>
<!-- HTTP proxy settings. The hint text for proxy exclusion list. -->
<string name="proxy_exclusionlist_hint" translatable="false">example.com,mycomp.test.com,localhost</string>
<!-- HTTP proxy settings. The hint text field for the hostname. -->
<string name="proxy_hostname_hint" translatable="false">proxy.example.com</string>
<!-- Description for the screen zoom level that makes interface elements small. [CHAR LIMIT=24] -->
<string name="screen_zoom_summary_small">Small</string>
<!-- Description for the device's default screen zoom level. [CHAR LIMIT=24] -->
<string name="screen_zoom_summary_default">Default</string>
<!-- Description for the screen zoom level that makes interface elements large. [CHAR LIMIT=24] -->
<string name="screen_zoom_summary_large">Large</string>
<!-- Description for the screen zoom level that makes interface elements larger. [CHAR LIMIT=24] -->
<string name="screen_zoom_summary_very_large">Larger</string>
<!-- Description for the screen zoom level that makes interface elements largest. [CHAR LIMIT=24] -->
<string name="screen_zoom_summary_extremely_large">Largest</string>
<!-- Description for a custom screen zoom level. This shows the requested display
density in raw pixels per inch rather than using a relative description. [CHAR LIMIT=24] -->
<string name="screen_zoom_summary_custom">Custom (<xliff:g id="densityDpi" example="160">%d</xliff:g>)</string>
<!-- Label for Help and feedback menu item -->
<string name="help_feedback_label">Help & feedback</string>
<!-- Content description for drawer menu button [CHAR_LIMIT=30]-->
<string name="content_description_menu_button">Menu</string>
</resources>