/*
* Copyright (C)2011-2013 D. R. Commander. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* - Neither the name of the libjpeg-turbo Project nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS",
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
package org.libjpegturbo.turbojpeg;
/**
* TurboJPEG utility class (cannot be instantiated)
*/
public final class TJ {
/**
* The number of chrominance subsampling options
*/
public static final int NUMSAMP = 6;
/**
* 4:4:4 chrominance subsampling (no chrominance subsampling). The JPEG
* or YUV image will contain one chrominance component for every pixel in the
* source image.
*/
public static final int SAMP_444 = 0;
/**
* 4:2:2 chrominance subsampling. The JPEG or YUV image will contain one
* chrominance component for every 2x1 block of pixels in the source image.
*/
public static final int SAMP_422 = 1;
/**
* 4:2:0 chrominance subsampling. The JPEG or YUV image will contain one
* chrominance component for every 2x2 block of pixels in the source image.
*/
public static final int SAMP_420 = 2;
/**
* Grayscale. The JPEG or YUV image will contain no chrominance components.
*/
public static final int SAMP_GRAY = 3;
/**
* 4:4:0 chrominance subsampling. The JPEG or YUV image will contain one
* chrominance component for every 1x2 block of pixels in the source image.
* Note that 4:4:0 subsampling is not fully accelerated in libjpeg-turbo.
*/
public static final int SAMP_440 = 4;
/**
* 4:1:1 chrominance subsampling. The JPEG or YUV image will contain one
* chrominance component for every 4x1 block of pixels in the source image.
* JPEG images compressed with 4:1:1 subsampling will be almost exactly the
* same size as those compressed with 4:2:0 subsampling, and in the
* aggregate, both subsampling methods produce approximately the same
* perceptual quality. However, 4:1:1 is better able to reproduce sharp
* horizontal features. Note that 4:1:1 subsampling is not fully accelerated
* in libjpeg-turbo.
*/
public static final int SAMP_411 = 5;
/**
* Returns the MCU block width for the given level of chrominance
* subsampling.
*
* @param subsamp the level of chrominance subsampling (one of
* <code>SAMP_*</code>)
*
* @return the MCU block width for the given level of chrominance
* subsampling.
*/
public static int getMCUWidth(int subsamp) throws Exception {
if (subsamp < 0 || subsamp >= NUMSAMP)
throw new Exception("Invalid subsampling type");
return mcuWidth[subsamp];
}
private static final int[] mcuWidth = {
8, 16, 16, 8, 8, 32
};
/**
* Returns the MCU block height for the given level of chrominance
* subsampling.
*
* @param subsamp the level of chrominance subsampling (one of
* <code>SAMP_*</code>)
*
* @return the MCU block height for the given level of chrominance
* subsampling.
*/
public static int getMCUHeight(int subsamp) throws Exception {
if (subsamp < 0 || subsamp >= NUMSAMP)
throw new Exception("Invalid subsampling type");
return mcuHeight[subsamp];
}
private static final int[] mcuHeight = {
8, 8, 16, 8, 16, 8
};
/**
* The number of pixel formats
*/
public static final int NUMPF = 12;
/**
* RGB pixel format. The red, green, and blue components in the image are
* stored in 3-byte pixels in the order R, G, B from lowest to highest byte
* address within each pixel.
*/
public static final int PF_RGB = 0;
/**
* BGR pixel format. The red, green, and blue components in the image are
* stored in 3-byte pixels in the order B, G, R from lowest to highest byte
* address within each pixel.
*/
public static final int PF_BGR = 1;
/**
* RGBX pixel format. The red, green, and blue components in the image are
* stored in 4-byte pixels in the order R, G, B from lowest to highest byte
* address within each pixel. The X component is ignored when compressing
* and undefined when decompressing.
*/
public static final int PF_RGBX = 2;
/**
* BGRX pixel format. The red, green, and blue components in the image are
* stored in 4-byte pixels in the order B, G, R from lowest to highest byte
* address within each pixel. The X component is ignored when compressing
* and undefined when decompressing.
*/
public static final int PF_BGRX = 3;
/**
* XBGR pixel format. The red, green, and blue components in the image are
* stored in 4-byte pixels in the order R, G, B from highest to lowest byte
* address within each pixel. The X component is ignored when compressing
* and undefined when decompressing.
*/
public static final int PF_XBGR = 4;
/**
* XRGB pixel format. The red, green, and blue components in the image are
* stored in 4-byte pixels in the order B, G, R from highest to lowest byte
* address within each pixel. The X component is ignored when compressing
* and undefined when decompressing.
*/
public static final int PF_XRGB = 5;
/**
* Grayscale pixel format. Each 1-byte pixel represents a luminance
* (brightness) level from 0 to 255.
*/
public static final int PF_GRAY = 6;
/**
* RGBA pixel format. This is the same as {@link #PF_RGBX}, except that when
* decompressing, the X byte is guaranteed to be 0xFF, which can be
* interpreted as an opaque alpha channel.
*/
public static final int PF_RGBA = 7;
/**
* BGRA pixel format. This is the same as {@link #PF_BGRX}, except that when
* decompressing, the X byte is guaranteed to be 0xFF, which can be
* interpreted as an opaque alpha channel.
*/
public static final int PF_BGRA = 8;
/**
* ABGR pixel format. This is the same as {@link #PF_XBGR}, except that when
* decompressing, the X byte is guaranteed to be 0xFF, which can be
* interpreted as an opaque alpha channel.
*/
public static final int PF_ABGR = 9;
/**
* ARGB pixel format. This is the same as {@link #PF_XRGB}, except that when
* decompressing, the X byte is guaranteed to be 0xFF, which can be
* interpreted as an opaque alpha channel.
*/
public static final int PF_ARGB = 10;
/**
* CMYK pixel format. Unlike RGB, which is an additive color model used
* primarily for display, CMYK (Cyan/Magenta/Yellow/Key) is a subtractive
* color model used primarily for printing. In the CMYK color model, the
* value of each color component typically corresponds to an amount of cyan,
* magenta, yellow, or black ink that is applied to a white background. In
* order to convert between CMYK and RGB, it is necessary to use a color
* management system (CMS.) A CMS will attempt to map colors within the
* printer's gamut to perceptually similar colors in the display's gamut and
* vice versa, but the mapping is typically not 1:1 or reversible, nor can it
* be defined with a simple formula. Thus, such a conversion is out of scope
* for a codec library. However, the TurboJPEG API allows for compressing
* CMYK pixels into a YCCK JPEG image (see {@link #CS_YCCK}) and
* decompressing YCCK JPEG images into CMYK pixels.
*/
public static final int PF_CMYK = 11;
/**
* Returns the pixel size (in bytes) for the given pixel format.
*
* @param pixelFormat the pixel format (one of <code>PF_*</code>)
*
* @return the pixel size (in bytes) for the given pixel format.
*/
public static int getPixelSize(int pixelFormat) throws Exception {
if (pixelFormat < 0 || pixelFormat >= NUMPF)
throw new Exception("Invalid pixel format");
return pixelSize[pixelFormat];
}
private static final int[] pixelSize = {
3, 3, 4, 4, 4, 4, 1, 4, 4, 4, 4, 4
};
/**
* For the given pixel format, returns the number of bytes that the red
* component is offset from the start of the pixel. For instance, if a pixel
* of format <code>TJ.PF_BGRX</code> is stored in <code>char pixel[]</code>,
* then the red component will be
* <code>pixel[TJ.getRedOffset(TJ.PF_BGRX)]</code>.
*
* @param pixelFormat the pixel format (one of <code>PF_*</code>)
*
* @return the red offset for the given pixel format.
*/
public static int getRedOffset(int pixelFormat) throws Exception {
if (pixelFormat < 0 || pixelFormat >= NUMPF)
throw new Exception("Invalid pixel format");
return redOffset[pixelFormat];
}
private static final int[] redOffset = {
0, 2, 0, 2, 3, 1, 0, 0, 2, 3, 1, -1
};
/**
* For the given pixel format, returns the number of bytes that the green
* component is offset from the start of the pixel. For instance, if a pixel
* of format <code>TJ.PF_BGRX</code> is stored in <code>char pixel[]</code>,
* then the green component will be
* <code>pixel[TJ.getGreenOffset(TJ.PF_BGRX)]</code>.
*
* @param pixelFormat the pixel format (one of <code>PF_*</code>)
*
* @return the green offset for the given pixel format.
*/
public static int getGreenOffset(int pixelFormat) throws Exception {
if (pixelFormat < 0 || pixelFormat >= NUMPF)
throw new Exception("Invalid pixel format");
return greenOffset[pixelFormat];
}
private static final int[] greenOffset = {
1, 1, 1, 1, 2, 2, 0, 1, 1, 2, 2, -1
};
/**
* For the given pixel format, returns the number of bytes that the blue
* component is offset from the start of the pixel. For instance, if a pixel
* of format <code>TJ.PF_BGRX</code> is stored in <code>char pixel[]</code>,
* then the blue component will be
* <code>pixel[TJ.getBlueOffset(TJ.PF_BGRX)]</code>.
*
* @param pixelFormat the pixel format (one of <code>PF_*</code>)
*
* @return the blue offset for the given pixel format.
*/
public static int getBlueOffset(int pixelFormat) throws Exception {
if (pixelFormat < 0 || pixelFormat >= NUMPF)
throw new Exception("Invalid pixel format");
return blueOffset[pixelFormat];
}
private static final int[] blueOffset = {
2, 0, 2, 0, 1, 3, 0, 2, 0, 1, 3, -1
};
/**
* The number of JPEG colorspaces
*/
public static final int NUMCS = 5;
/**
* RGB colorspace. When compressing the JPEG image, the R, G, and B
* components in the source image are reordered into image planes, but no
* colorspace conversion or subsampling is performed. RGB JPEG images can be
* decompressed to any of the extended RGB pixel formats or grayscale, but
* they cannot be decompressed to YUV images.
*/
public static final int CS_RGB = 0;
/**
* YCbCr colorspace. YCbCr is not an absolute colorspace but rather a
* mathematical transformation of RGB designed solely for storage and
* transmission. YCbCr images must be converted to RGB before they can
* actually be displayed. In the YCbCr colorspace, the Y (luminance)
* component represents the black & white portion of the original image, and
* the Cb and Cr (chrominance) components represent the color portion of the
* original image. Originally, the analog equivalent of this transformation
* allowed the same signal to drive both black & white and color televisions,
* but JPEG images use YCbCr primarily because it allows the color data to be
* optionally subsampled for the purposes of reducing bandwidth or disk
* space. YCbCr is the most common JPEG colorspace, and YCbCr JPEG images
* can be compressed from and decompressed to any of the extended RGB pixel
* formats or grayscale, or they can be decompressed to YUV planar images.
*/
public static final int CS_YCbCr = 1;
/**
* Grayscale colorspace. The JPEG image retains only the luminance data (Y
* component), and any color data from the source image is discarded.
* Grayscale JPEG images can be compressed from and decompressed to any of
* the extended RGB pixel formats or grayscale, or they can be decompressed
* to YUV planar images.
*/
public static final int CS_GRAY = 2;
/**
* CMYK colorspace. When compressing the JPEG image, the C, M, Y, and K
* components in the source image are reordered into image planes, but no
* colorspace conversion or subsampling is performed. CMYK JPEG images can
* only be decompressed to CMYK pixels.
*/
public static final int CS_CMYK = 3;
/**
* YCCK colorspace. YCCK (AKA "YCbCrK") is not an absolute colorspace but
* rather a mathematical transformation of CMYK designed solely for storage
* and transmission. It is to CMYK as YCbCr is to RGB. CMYK pixels can be
* reversibly transformed into YCCK, and as with YCbCr, the chrominance
* components in the YCCK pixels can be subsampled without incurring major
* perceptual loss. YCCK JPEG images can only be compressed from and
* decompressed to CMYK pixels.
*/
public static final int CS_YCCK = 4;
/**
* The uncompressed source/destination image is stored in bottom-up (Windows,
* OpenGL) order, not top-down (X11) order.
*/
public static final int FLAG_BOTTOMUP = 2;
@Deprecated
public static final int FLAG_FORCEMMX = 8;
@Deprecated
public static final int FLAG_FORCESSE = 16;
@Deprecated
public static final int FLAG_FORCESSE2 = 32;
@Deprecated
public static final int FLAG_FORCESSE3 = 128;
/**
* When decompressing an image that was compressed using chrominance
* subsampling, use the fastest chrominance upsampling algorithm available in
* the underlying codec. The default is to use smooth upsampling, which
* creates a smooth transition between neighboring chrominance components in
* order to reduce upsampling artifacts in the decompressed image.
*/
public static final int FLAG_FASTUPSAMPLE = 256;
/**
* Use the fastest DCT/IDCT algorithm available in the underlying codec. The
* default if this flag is not specified is implementation-specific. For
* example, the implementation of TurboJPEG for libjpeg[-turbo] uses the fast
* algorithm by default when compressing, because this has been shown to have
* only a very slight effect on accuracy, but it uses the accurate algorithm
* when decompressing, because this has been shown to have a larger effect.
*/
public static final int FLAG_FASTDCT = 2048;
/**
* Use the most accurate DCT/IDCT algorithm available in the underlying
* codec. The default if this flag is not specified is
* implementation-specific. For example, the implementation of TurboJPEG for
* libjpeg[-turbo] uses the fast algorithm by default when compressing,
* because this has been shown to have only a very slight effect on accuracy,
* but it uses the accurate algorithm when decompressing, because this has
* been shown to have a larger effect.
*/
public static final int FLAG_ACCURATEDCT = 4096;
/**
* Returns the maximum size of the buffer (in bytes) required to hold a JPEG
* image with the given width, height, and level of chrominance subsampling.
*
* @param width the width (in pixels) of the JPEG image
*
* @param height the height (in pixels) of the JPEG image
*
* @param jpegSubsamp the level of chrominance subsampling to be used when
* generating the JPEG image (one of {@link TJ TJ.SAMP_*})
*
* @return the maximum size of the buffer (in bytes) required to hold a JPEG
* image with the given width, height, and level of chrominance subsampling.
*/
public static native int bufSize(int width, int height, int jpegSubsamp)
throws Exception;
/**
* Returns the size of the buffer (in bytes) required to hold a YUV planar
* image with the given width, height, and level of chrominance subsampling.
*
* @param width the width (in pixels) of the YUV image
*
* @param pad the width of each line in each plane of the image is padded to
* the nearest multiple of this number of bytes (must be a power of 2.)
*
* @param height the height (in pixels) of the YUV image
*
* @param subsamp the level of chrominance subsampling used in the YUV
* image (one of {@link TJ TJ.SAMP_*})
*
* @return the size of the buffer (in bytes) required to hold a YUV planar
* image with the given width, height, and level of chrominance subsampling.
*/
public static native int bufSizeYUV(int width, int pad, int height,
int subsamp)
throws Exception;
/**
* @deprecated Use {@link #bufSizeYUV(int, int, int, int)} instead.
*/
@Deprecated
public static native int bufSizeYUV(int width, int height, int subsamp)
throws Exception;
/**
* Returns the size of the buffer (in bytes) required to hold a YUV image
* plane with the given parameters.
*
* @param componentID ID number of the image plane (0 = Y, 1 = U/Cb,
* 2 = V/Cr)
*
* @param width width (in pixels) of the YUV image. NOTE: this is the width
* of the whole image, not the plane width.
*
* @param stride bytes per line in the image plane.
*
* @param height height (in pixels) of the YUV image. NOTE: this is the
* height of the whole image, not the plane height.
*
* @param subsamp the level of chrominance subsampling used in the YUV
* image (one of {@link TJ TJ.SAMP_*})
*
* @return the size of the buffer (in bytes) required to hold a YUV planar
* image with the given parameters.
*/
public static native int planeSizeYUV(int componentID, int width, int stride,
int height, int subsamp)
throws Exception;
/**
* Returns the plane width of a YUV image plane with the given parameters.
* Refer to {@link YUVImage YUVImage} for a description of plane width.
*
* @param componentID ID number of the image plane (0 = Y, 1 = U/Cb,
* 2 = V/Cr)
*
* @param width width (in pixels) of the YUV image
*
* @param subsamp the level of chrominance subsampling used in the YUV image
* (one of {@link TJ TJ.SAMP_*})
*
* @return the plane width of a YUV image plane with the given parameters.
*/
public static native int planeWidth(int componentID, int width, int subsamp)
throws Exception;
/**
* Returns the plane height of a YUV image plane with the given parameters.
* Refer to {@link YUVImage YUVImage} for a description of plane height.
*
* @param componentID ID number of the image plane (0 = Y, 1 = U/Cb,
* 2 = V/Cr)
*
* @param height height (in pixels) of the YUV image
*
* @param subsamp the level of chrominance subsampling used in the YUV image
* (one of {@link TJ TJ.SAMP_*})
*
* @return the plane height of a YUV image plane with the given parameters.
*/
public static native int planeHeight(int componentID, int height,
int subsamp)
throws Exception;
/**
* Returns a list of fractional scaling factors that the JPEG decompressor in
* this implementation of TurboJPEG supports.
*
* @return a list of fractional scaling factors that the JPEG decompressor in
* this implementation of TurboJPEG supports.
*/
public static native TJScalingFactor[] getScalingFactors()
throws Exception;
static {
TJLoader.load();
}
};