<?Xm version="1.0" encoding="utf-8"?>
<!--
~ Copyright (C) 2015 The Android Open Source Project
~
~ Licensed under the Apache License, Version 2.0 (the "License");
~ you may not use this file except in compliance with the License.
~ You may obtain a copy of the License at
~
~ http://www.apache.org/licenses/LICENSE-2.0
~
~ Unless required by applicable law or agreed to in writing, software
~ distributed under the License is distributed on an "AS IS" BASIS,
~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
~ See the License for the specific language governing permissions and
~ limitations under the License.
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Name of this application. It appears in TV app UI, as one of available TV inputs. -->
<string name="ut_app_name">USB Tuner TV Input</string>
<!-- Title for an action which turns a feature on [CHAR LIMIT=30] -->
<string name="ut_setup_on">On</string>
<!-- Title for an action which turns a feature off [CHAR LIMIT=30] -->
<string name="ut_setup_off">Off</string>
<!-- Message shown when the scanning process is being canceled by a user and the scanning
process needs the time to wait to finish the processing -->
<string name="ut_setup_cancel">Please wait to finish processing</string>
<!-- Message that asks a user to select the type of signal to be used for input among
the choices like terrestrial, cable, or satellite -->
<string name="ut_select_channel_map">Select your channel source</string>
<!-- Message that indicates TV input signal is lost due to physical disconnection or bad reception -->
<string name="ut_no_signal">No Signal</string>
<!-- Message that says TV failed to change to a channel (or tune) -->
<string name="ut_fail_to_tune">Failed to tune to <xliff:g id="channel_name">%s</xliff:g></string>
<!-- Message that says TV failed to change(or tune) to a channel which has no title -->
<string name="ut_fail_to_tune_to_unknown_channel">Failed to tune</string>
<!-- Message shown when the scanned channels became invalid due to incompatible changes
found across application versions, hence a user is required to rescan the channels -->
<string name="ut_rescan_needed">USB tuner software has been recently updated. Please re-scan the
channels.</string>
<!-- Message that says audio of the current channel is not available due to TV device
lacking the support of the feature AC3 audio passthrough -->
<string name="ut_ac3_passthrough_unavailable">AC3 audio not available</string>
<!-- Usb Tuner setup common UI breadcrumb -->
<string name="ut_setup_breadcrumb">Channel tuner setup</string>
<!-- Title for USB tuner main setup menu when no channel exists -->
<string name="ut_setup_new_title">USB channel tunner setup</string>
<!-- Description for USB tuner main setup menu when no channel exists -->
<string name="ut_setup_new_description">Verify the USB tuner is plugged in and connected
to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its
placement or direction to receive the most channels. For best results,
place it high and near a window.</string>
<!-- Menu items for USB tuner main setup menu when no channel exists -->
<string-array name="ut_setup_new_choices">
<!-- Continue setup -->
<item>Continue</item>
<!-- Exit setup -->
<item>Not now</item>
</string-array>
<!-- Title for USB tuner main setup menu when channel exists already -->
<string name="ut_setup_again_title">Rerun channel setup?</string>
<!-- Description for USB tuner main setup menu when channel exists already -->
<string name="ut_setup_again_description">This will remove the channels found from the USB
tuner and scan for new channels again.\n\nVerify the USB tuner is plugged in and connected
to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its
placement or direction to receive the most channels. For best results, place it high and
near a window.</string>
<!-- Menu items for USB tuner main setup menu when channel exists already -->
<string-array name="ut_setup_again_choices">
<!-- Continue setup -->
<item>Continue</item>
<!-- Exit setup -->
<item>Cancel</item>
</string-array>
<!-- Title for connection type selection menu -->
<string name="ut_connection_title">Select the connection type</string>
<!-- Description for connection type selection menu -->
<string name="ut_connection_description">Choose Antenna if there is an external antenna
connected to the tuner. Choose Cable if your channels come from a cable service provider.
If you are not sure, both types will be scanned, but this may take longer.</string>
<!-- Menu items for connection type selection menu -->
<string-array name="ut_connection_choices">
<!-- Signal coming from the antenna that carries over-the-air, terrestrial channels -->
<item>Antenna</item>
<!-- Signal for cable television channels -->
<item>Cable</item>
<!-- Not sure what type of connection is provided for channel scanning -->
<item>Not sure</item>
<item translatable="false">Development only</item>
</string-array>
<!-- Title for channel scanning menu -->
<string name="ut_channel_scan">USB channel tuner setup</string>
<!-- Message that says channel is not yet scanned during channel scanning process -->
<string name="ut_channel_scan_time">This may take several minutes</string>
<!-- Message that says channels are found during channel scanning process -->
<plurals name="ut_channel_scan_message">
<item quantity="one">%1$d channel found</item>
<item quantity="other">%1$d channels found</item>
</plurals>
<!-- Title for a button which will stop channel scanning process -->
<string name="ut_stop_channel_scan">STOP CHANNEL SCAN</string>
<!-- Title for channel scanning result menu when channels were found -->
<plurals name="ut_result_found_title">
<item quantity="one">%1$d channel found</item>
<item quantity="other">%1$d channels found</item>
</plurals>
<!-- Description for channel scanning result menu when channels were found -->
<plurals name="ut_result_found_description">
<item quantity="one">Nice! %1$d channel was found during the channel scan.
If this doesn’t seem right, try adjusting the antenna position and scan again.</item>
<item quantity="other">Nice! %1$d channels were found during the channel scan.
If this doesn’t seem right, try adjusting the antenna position and scan again.</item>
</plurals>
<!-- Menu items for channel scanning result menu when channels were found -->
<string-array name="ut_result_found_choices">
<item>Done</item>
<item>Scan again</item>
</string-array>
<!-- Title for channel scanning result menu when no channel was found -->
<string name="ut_result_not_found_title">No Channels found</string>
<!-- Description for channel scanning result menu when no channel was found -->
<string name="ut_result_not_found_description">The scan did not find any channels. Verify the
USB tuner is plugged in and connected to a TV signal source.\n\nIf using an over-the-air
antenna, adjust its placement or direction. For best results, place it high and near a
window and scan again.</string>
<!-- Menu items for channel scanning result menu when no channel was found -->
<string-array name="ut_result_not_found_choices">
<item>Scan again</item>
<item>Done</item>
</string-array>
<!-- Recommendation card of USB channel tuner setup strings. -->
<!-- Content title of the recommendation card to launch the setup application of
USB tuner TV input for scanning channels. This text is shown only when the card is
focused. -->
<string name="ut_setup_recommendation_card_focused_title">Scan for TV channels</string>
<!-- Content text and info of the recommendation card to launch the setup application of
USB tuner TV input for scanning channels. -->
<string name="ut_setup_recommendation_card_title">USB channel tuner setup</string>
</resources>