snapshot_script - Android社区 - https://www.androidos.net.cn/

#!/bin/sh
#set -x
#
# This is a script to generate a quick "snapshot" of performance for a
# pair of nodes. At first, it will perform the following tests:
#
# TCP Stream test with 56KB socket buffers and 4KB sends
# TCP Stream test with 32KB socket buffers and 4KB sends
# TCP Request/Response test with 1 byte requests and 1 byte responses
# UDP Request/Response test with 1 byte requests and 1 byte responses
# UDP Request/Response test with 516 byte requests and 4 byte responses
# UDP Stream test with 32KB socket buffers and 4KB sends
# UDP Stream test with 32KB socket buffers and 1KB sends
#
# All tests will run for sixty seconds. Confidence intervals are used
# to insure the repeatability of the test. This means that the soonest
# the script will be finished is 21 minutes.
#
# This script takes two parameters. The first parm is the name of the
# remote host. It is a required parameter. The second will either
# enable or disable CPU utilization measurements. It is an optional
# parameter which defaults to no CPU utilization measurements.
#
# usage: snapshot_script hostname [CPU]
#
# mod 6/29/95 - echo progress information to stderr so that we can 
#               see forward progress even when the results are 
#               re-directed to a file
#
# mod 5/27/96 - switch from NETHOME to NETPERF and take the user's value
#               if it is already set
#
# mod 8/12/96 - fix the default netperf command variable so it finds the
#               executable and not the directory...
#
# First, let us set-up some of the defaults
#
# where is netperf installed, there are a few possible places:

NETPERF_CMD=${NETPERF_CMD:=/opt/netperf/netperf}


# there should be no more than two parms passed

if [ $# -gt 2 ]; then
  echo "try again, correctly -> snapshot_script hostname [CPU]"
  exit 1
fi

if [ $# -eq 0 ]; then
  echo "try again, correctly -> snapshot_script hostname [CPU]"
  exit 1
fi

# if there are two parms, parm one it the hostname and parm two will
# be a CPU indicator. actuall, anything as a second parm will cause
# the CPU to be measured, but we will "advertise" it should be "CPU"

if [ $# -eq 2 ]; then
  REM_HOST=$1
  LOC_CPU="-c"
  REM_CPU="-C"
fi

if [ $# -eq 1 ]; then
  REM_HOST=$1
fi

# at what port will netserver be waiting? If you decide to run
# netserver at a differnet port than the default of 12865, then set
# the value of PORT apropriately
#NETPERF_PORT="-p some_other_portnum"
NETPERF_PORT=${NETPERF_PORT:=""}

# How accurate we want the estimate of performance: 
#      maximum and minimum test iterations (-i)
#      confidence level (99 or 95) and interval (percent)
STATS_STUFF="-i 10,3 -I 99,5"

# length in time of the test - should be 60 seconds
NETPERF_TIME=${NETPERF_TIME:=60}

# where is the bitbucket?
BITBUCKET="/dev/null"

# announce start of test
echo Netperf snapshot script started at `date` >&2

# If we are measuring CPU utilization, then we can save beaucoup time
# by saving the results of the CPU calibration and passing them in
# during the real tests. So, we execute the new CPU "tests" of netperf
# and put the values into shell vars.

case $LOC_CPU in
\-c) LOC_RATE=`$NETPERF_CMD $NETPERF_PORT -t LOC_CPU`;;
*) LOC_RATE=""
esac

case $REM_CPU in
\-C) REM_RATE=`$NETPERF_CMD $NETPERF_PORT -t REM_CPU -H $REM_HOST`;;
*) REM_RATE=""
esac

# We will perform three twenty second warm-up tests at this point, but
# we will not display the results of those tests. This is unlikely to
# make any difference in the results except right after a system
# reboot, but this is supposed to be rather "general." We will do a
# TCP stream and a TCP req/resp test

WARM_TIME="10"

$NETPERF_CMD $NETPERF_PORT -l $WARM_TIME -t TCP_STREAM -H $REM_HOST -- \
  -s 32768 -S 32768 -m 4096 > ${BITBUCKET}
$NETPERF_CMD $NETPERF_PORT -l $WARM_TIME -t TCP_STREAM -H $REM_HOST -- \
  -s 32768 -S 32768 -m 96 > ${BITBUCKET}
$NETPERF_CMD $NETPERF_PORT -l $WARM_TIME -t TCP_RR -H $REM_HOST -- \
  -r 1,1 > ${BITBUCKET}

# The warm-ups are complete, so perform the real tests first, the
# stream tests, then the request/response

echo Starting 56x4  TCP_STREAM tests at `date` >&2

# a 56x4 TCP_STREAM test
echo
echo ------------------------------------
echo Testing with the following command line:
echo $NETPERF_CMD $NETPERF_PORT -t TCP_STREAM -l $NETPERF_TIME -H $REM_HOST \
  $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
  -s 57344 -S 57344 -m 4096
echo
$NETPERF_CMD $NETPERF_PORT -t TCP_STREAM -l $NETPERF_TIME -H $REM_HOST \
  $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
  -s 57344 -S 57344 -m 4096
echo
echo
# a 32x4 TCP_STREAM test
echo Starting 32x4  TCP_STREAM tests at `date` >&2
echo
echo ------------------------------------
echo Testing with the following command line:
echo $NETPERF_CMD $NETPERF_PORT -t TCP_STREAM -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -s 32768 -S 32768 -m 4096 
echo
$NETPERF_CMD $NETPERF_PORT -t TCP_STREAM -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -s 32768 -S 32768 -m 4096 
echo
echo
# a single-byte TCP_RR
echo Starting 1,1   TCP_RR     tests at `date` >&2
echo
echo ------------------------------------
echo Testing with the following command line:
echo $NETPERF_CMD $NETPERF_PORT -t TCP_RR -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -r 1,1
echo
$NETPERF_CMD $NETPERF_PORT -t TCP_RR -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -r 1,1
echo
echo
echo Starting 1,1   UDP_RR     tests at `date` >&2
echo
echo ------------------------------------
echo Testing with the following command line:
# a single-byte UDP_RR
echo $NETPERF_CMD $NETPERF_PORT -t UDP_RR -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -r 1,1
echo
$NETPERF_CMD $NETPERF_PORT -t UDP_RR -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -r 1,1
echo
echo
# a UDP_RR test much like tftp
echo Starting 512,4 UDP_RR     tests at `date` >&2
echo
echo ------------------------------------
echo Testing with the following command line:
echo $NETPERF_CMD $NETPERF_PORT -t UDP_RR -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -r 516,4
echo
$NETPERF_CMD $NETPERF_PORT -t UDP_RR -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- -r 516,4
# a 32x4 UDP_STREAM test
echo Starting 32x4  UDP_STREAM tests at `date` >&2
echo
echo ------------------------------------
echo Testing with the following command line:
echo $NETPERF_CMD $NETPERF_PORT -t UDP_STREAM -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -s 32768 -S 32768 -m 4096
echo
$NETPERF_CMD $NETPERF_PORT -t UDP_STREAM -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -s 32768 -S 32768 -m 4096
echo
echo
# a 32x1 UDP_STREAM test
echo Starting 32x1  UDP_STREAM tests at `date` >&2
echo
echo ------------------------------------
echo Testing with the following command line:
echo $NETPERF_CMD $NETPERF_PORT -t UDP_STREAM -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -s 32768 -S 32768 -m 1024
echo
$NETPERF_CMD $NETPERF_PORT -t UDP_STREAM -l $NETPERF_TIME -H $REM_HOST \
 $LOC_CPU $LOC_RATE $REM_CPU $REM_RATE $STATS_STUFF -- \
 -s 32768 -S 32768 -m 1024
echo
echo

# and that's that
echo Tests completed at `date` >&2

echo