/******************************************************************************
*
* Copyright (C) 2009-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This interface file contains the interface to the Multi-Channel
* Adaptation Protocol (MCAP).
*
******************************************************************************/
#ifndef MCA_API_H
#define MCA_API_H
#include "bt_target.h"
#include "l2c_api.h"
/* move the following to bt_target.h or other place later */
#define MCA_NUM_TC_TBL ((MCA_NUM_REGS)*(MCA_NUM_LINKS)*(MCA_NUM_MDLS+1))
#define MCA_NUM_CCBS ((MCA_NUM_REGS)*(MCA_NUM_LINKS)) /* Number of control channel control blocks */
#define MCA_NUM_DCBS ((MCA_NUM_REGS)*(MCA_NUM_LINKS)*(MCA_NUM_MDLS)) /* Number of data channel control blocks */
/*****************************************************************************
** constants
*****************************************************************************/
/* API function return value result codes. */
#define MCA_SUCCESS 0 /* Function successful */
#define MCA_BAD_PARAMS 1 /* Invalid parameters */
#define MCA_NO_RESOURCES 2 /* Not enough resources */
#define MCA_BAD_HANDLE 3 /* Bad handle */
#define MCA_BUSY 4 /* A procedure is already in progress */
#define MCA_WRITE_FAIL 5 /* Write failed */
#define MCA_BAD_MDL_ID 6 /* MDL ID is not valid for the current API */
typedef UINT8 tMCA_RESULT;
/* MDEP data type. */
#define MCA_TDEP_ECHO 0 /* MDEP for echo test */
#define MCA_TDEP_DATA 1 /* MDEP for normal data */
/* Control callback events. */
#define MCA_ERROR_RSP_EVT 0 /* error response */
#define MCA_CREATE_IND_EVT 1 /* create mdl indication */
#define MCA_CREATE_CFM_EVT 2 /* create mdl confirm */
#define MCA_RECONNECT_IND_EVT 3 /* reconnect mdl indication */
#define MCA_RECONNECT_CFM_EVT 4 /* reconnect mdl confirm */
#define MCA_ABORT_IND_EVT 5 /* abort mdl indication */
#define MCA_ABORT_CFM_EVT 6 /* abort mdl confirm */
#define MCA_DELETE_IND_EVT 7 /* delete mdl indication */
#define MCA_DELETE_CFM_EVT 8 /* delete mdl confirm */
#define MCA_SYNC_CAP_IND_EVT 0x11 /* request sync capabilities & requirements */
#define MCA_SYNC_CAP_CFM_EVT 0x12 /* indicate completion */
#define MCA_SYNC_SET_IND_EVT 0x13 /* request to set the time-stamp clock */
#define MCA_SYNC_SET_CFM_EVT 0x14 /* indicate completion */
#define MCA_SYNC_INFO_IND_EVT 0x15 /* update of the actual time-stamp clock instant from the sync slave */
#define MCA_CONNECT_IND_EVT 0x20 /* Control channel connected */
#define MCA_DISCONNECT_IND_EVT 0x21 /* Control channel disconnected */
#define MCA_OPEN_IND_EVT 0x22 /* Data channel open indication */
#define MCA_OPEN_CFM_EVT 0x23 /* Data channel open confirm */
#define MCA_CLOSE_IND_EVT 0x24 /* Data channel close indication */
#define MCA_CLOSE_CFM_EVT 0x25 /* Data channel close confirm */
#define MCA_CONG_CHG_EVT 0x26 /* congestion change event */
#define MCA_RSP_TOUT_IND_EVT 0x27 /* Control channel message response timeout */
/*****************************************************************************
** Type Definitions
*****************************************************************************/
typedef UINT8 tMCA_HANDLE; /* the handle for registration. 1 based index to rcb */
typedef UINT8 tMCA_CL; /* the handle for a control channel; reported at MCA_CONNECT_IND_EVT */
typedef UINT8 tMCA_DEP; /* the handle for MCA_CreateDep. This is also the local mdep_id */
typedef UINT16 tMCA_DL; /* the handle for the data channel. This is reported at MCA_OPEN_CFM_EVT or MCA_OPEN_IND_EVT */
/* This is the data callback function. It is executed when MCAP has a data
** packet ready for the application.
*/
typedef void (tMCA_DATA_CBACK)(tMCA_DL mdl, BT_HDR *p_pkt);
/* This structure contains parameters which are set at registration. */
typedef struct {
UINT32 rsp_tout; /* MCAP signaling response timeout */
UINT16 ctrl_psm; /* L2CAP PSM for the MCAP control channel */
UINT16 data_psm; /* L2CAP PSM for the MCAP data channel */
UINT16 sec_mask; /* Security mask for BTM_SetSecurityLevel() */
} tMCA_REG;
/* This structure contains parameters to create a MDEP. */
typedef struct {
UINT8 type; /* MCA_TDEP_DATA, or MCA_TDEP_ECHO. a regiatration may have only one MCA_TDEP_ECHO MDEP */
UINT8 max_mdl; /* The maximum number of MDLs for this MDEP (max is MCA_NUM_MDLS) */
tMCA_DATA_CBACK *p_data_cback; /* Data callback function */
} tMCA_CS;
#define MCA_FCS_NONE 0 /* fcs_present=FALSE */
#define MCA_FCS_BYPASS 0x10 /* fcs_present=TRUE, fcs=L2CAP_CFG_FCS_BYPASS */
#define MCA_FCS_USE 0x11 /* fcs_present=TRUE, fcs=L2CAP_CFG_FCS_USE */
#define MCA_FCS_PRESNT_MASK 0x10 /* fcs_present=TRUE */
#define MCA_FCS_USE_MASK 0x01 /* mask for fcs */
typedef UINT8 tMCA_FCS_OPT;
/* This structure contains L2CAP configuration parameters for the channel. */
typedef struct {
tL2CAP_FCR_OPTS fcr_opt;
UINT16 user_rx_buf_size;
UINT16 user_tx_buf_size;
UINT16 fcr_rx_buf_size;
UINT16 fcr_tx_buf_size;
tMCA_FCS_OPT fcs;
UINT16 data_mtu; /* L2CAP MTU of the MCAP data channel */
} tMCA_CHNL_CFG;
/* Header structure for callback event parameters. */
typedef struct {
UINT16 mdl_id; /* The associated MDL ID */
UINT8 op_code; /* The op (request/response) code */
} tMCA_EVT_HDR;
/* Response Header structure for callback event parameters. */
typedef struct {
UINT16 mdl_id; /* The associated MDL ID */
UINT8 op_code; /* The op (request/response) code */
UINT8 rsp_code; /* The response code */
} tMCA_RSP_EVT;
/* This data structure is associated with the MCA_CREATE_IND_EVT. */
typedef struct {
UINT16 mdl_id; /* The associated MDL ID */
UINT8 op_code; /* The op (request/response) code */
UINT8 dep_id; /* MDEP ID */
UINT8 cfg; /* The configuration to negotiate */
} tMCA_CREATE_IND;
/* This data structure is associated with the MCA_CREATE_CFM_EVT. */
typedef struct {
UINT16 mdl_id; /* The associated MDL ID */
UINT8 op_code; /* The op (request/response) code */
UINT8 rsp_code; /* The response code. */
UINT8 cfg; /* The configuration to negotiate */
} tMCA_CREATE_CFM;
/* This data structure is associated with MCA_CONNECT_IND_EVT. */
typedef struct {
BD_ADDR bd_addr; /* The peer address */
UINT16 mtu; /* peer mtu */
} tMCA_CONNECT_IND;
/* This data structure is associated with MCA_DISCONNECT_IND_EVT. */
typedef struct {
BD_ADDR bd_addr; /* The peer address */
UINT16 reason; /* disconnect reason given by L2CAP */
} tMCA_DISCONNECT_IND;
/* This data structure is associated with MCA_OPEN_IND_EVT, and MCA_OPEN_CFM_EVT. */
typedef struct {
UINT16 mdl_id; /* The associated MDL ID */
tMCA_DL mdl; /* The handle for the data channel */
UINT16 mtu; /* peer mtu */
} tMCA_DL_OPEN;
/* This data structure is associated with MCA_CLOSE_IND_EVT and MCA_CLOSE_CFM_EVT. */
typedef struct {
UINT16 mdl_id; /* The associated MDL ID */
tMCA_DL mdl; /* The handle for the data channel */
UINT16 reason; /* disconnect reason given by L2CAP */
} tMCA_DL_CLOSE;
/* This data structure is associated with MCA_CONG_CHG_EVT. */
typedef struct {
UINT16 mdl_id; /* N/A - This is a place holder */
tMCA_DL mdl; /* The handle for the data channel */
BOOLEAN cong; /* TRUE, if the channel is congested */
} tMCA_CONG_CHG;
/* Union of all control callback event data structures */
typedef union {
tMCA_EVT_HDR hdr;
tMCA_RSP_EVT rsp;
tMCA_CREATE_IND create_ind;
tMCA_CREATE_CFM create_cfm;
tMCA_EVT_HDR reconnect_ind;
tMCA_RSP_EVT reconnect_cfm;
tMCA_EVT_HDR abort_ind;
tMCA_RSP_EVT abort_cfm;
tMCA_EVT_HDR delete_ind;
tMCA_RSP_EVT delete_cfm;
tMCA_CONNECT_IND connect_ind;
tMCA_DISCONNECT_IND disconnect_ind;
tMCA_DL_OPEN open_ind;
tMCA_DL_OPEN open_cfm;
tMCA_DL_CLOSE close_ind;
tMCA_DL_CLOSE close_cfm;
tMCA_CONG_CHG cong_chg;
} tMCA_CTRL;
/* This is the control callback function. This function passes control events
** to the application.
*/
typedef void (tMCA_CTRL_CBACK)(tMCA_HANDLE handle, tMCA_CL mcl, UINT8 event,
tMCA_CTRL *p_data);
/*******************************************************************************
**
** Function MCA_Init
**
** Description Initialize MCAP internal control blocks.
** This function is called at stack start up.
**
** Returns void
**
*******************************************************************************/
extern void MCA_Init(void);
/*******************************************************************************
**
** Function MCA_SetTraceLevel
**
** Description This function sets the debug trace level for MCA.
** If 0xff is passed, the current trace level is returned.
**
** Input Parameters:
** level: The level to set the MCA tracing to:
** 0xff-returns the current setting.
** 0-turns off tracing.
** >= 1-Errors.
** >= 2-Warnings.
** >= 3-APIs.
** >= 4-Events.
** >= 5-Debug.
**
** Returns The new trace level or current trace level if
** the input parameter is 0xff.
**
*******************************************************************************/
extern UINT8 MCA_SetTraceLevel (UINT8 level);
/*******************************************************************************
**
** Function MCA_Register
**
** Description This function registers an MCAP implementation.
** It is assumed that the control channel PSM and data channel
** PSM are not used by any other instances of the stack.
** If the given p_reg->ctrl_psm is 0, this handle is INT only.
**
** Returns 0, if failed. Otherwise, the MCA handle.
**
*******************************************************************************/
extern tMCA_HANDLE MCA_Register(tMCA_REG *p_reg, tMCA_CTRL_CBACK *p_cback);
/*******************************************************************************
**
** Function MCA_Deregister
**
** Description This function is called to deregister an MCAP implementation.
** Before this function can be called, all control and data
** channels must be removed with MCA_DisconnectReq and MCA_CloseReq.
**
** Returns void
**
*******************************************************************************/
extern void MCA_Deregister(tMCA_HANDLE handle);
/*******************************************************************************
**
** Function MCA_CreateDep
**
** Description Create a data endpoint. If the MDEP is created successfully,
** the MDEP ID is returned in *p_dep. After a data endpoint is
** created, an application can initiate a connection between this
** endpoint and an endpoint on a peer device.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_CreateDep(tMCA_HANDLE handle, tMCA_DEP *p_dep, tMCA_CS *p_cs);
/*******************************************************************************
**
** Function MCA_DeleteDep
**
** Description Delete a data endpoint. This function is called when
** the implementation is no longer using a data endpoint.
** If this function is called when the endpoint is connected
** the connection is closed and the data endpoint
** is removed.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_DeleteDep(tMCA_HANDLE handle, tMCA_DEP dep);
/*******************************************************************************
**
** Function MCA_ConnectReq
**
** Description This function initiates an MCAP control channel connection
** to the peer device. When the connection is completed, an
** MCA_CONNECT_IND_EVT is reported to the application via its
** control callback function.
** This control channel is identified by tMCA_CL.
** If the connection attempt fails, an MCA_DISCONNECT_IND_EVT is
** reported. The security mask parameter overrides the outgoing
** security mask set in MCA_Register().
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_ConnectReq(tMCA_HANDLE handle, BD_ADDR bd_addr,
UINT16 ctrl_psm,
UINT16 sec_mask);
/*******************************************************************************
**
** Function MCA_DisconnectReq
**
** Description This function disconnect an MCAP control channel
** to the peer device.
** If associated data channel exists, they are disconnected.
** When the MCL is disconnected an MCA_DISCONNECT_IND_EVT is
** reported to the application via its control callback function.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_DisconnectReq(tMCA_CL mcl);
/*******************************************************************************
**
** Function MCA_CreateMdl
**
** Description This function sends a CREATE_MDL request to the peer device.
** When the response is received, a MCA_CREATE_CFM_EVT is reported
** with the given MDL ID.
** If the response is successful, a data channel is open
** with the given p_chnl_cfg
** When the data channel is open successfully, a MCA_OPEN_CFM_EVT
** is reported. This data channel is identified as tMCA_DL.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_CreateMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm,
UINT16 mdl_id, UINT8 peer_dep_id,
UINT8 cfg, const tMCA_CHNL_CFG *p_chnl_cfg);
/*******************************************************************************
**
** Function MCA_CreateMdlRsp
**
** Description This function sends a CREATE_MDL response to the peer device
** in response to a received MCA_CREATE_IND_EVT.
** If the rsp_code is successful, a data channel is open
** with the given p_chnl_cfg
** When the data channel is open successfully, a MCA_OPEN_IND_EVT
** is reported. This data channel is identified as tMCA_DL.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_CreateMdlRsp(tMCA_CL mcl, tMCA_DEP dep,
UINT16 mdl_id, UINT8 cfg, UINT8 rsp_code,
const tMCA_CHNL_CFG *p_chnl_cfg);
/*******************************************************************************
**
** Function MCA_CloseReq
**
** Description Close a data channel. When the channel is closed, an
** MCA_CLOSE_CFM_EVT is sent to the application via the
** control callback function for this handle.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_CloseReq(tMCA_DL mdl);
/*******************************************************************************
**
** Function MCA_ReconnectMdl
**
** Description This function sends a RECONNECT_MDL request to the peer device.
** When the response is received, a MCA_RECONNECT_CFM_EVT is reported.
** If the response is successful, a data channel is open.
** When the data channel is open successfully, a MCA_OPEN_CFM_EVT
** is reported.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_ReconnectMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm,
UINT16 mdl_id, const tMCA_CHNL_CFG *p_chnl_cfg);
/*******************************************************************************
**
** Function MCA_ReconnectMdlRsp
**
** Description This function sends a RECONNECT_MDL response to the peer device
** in response to a MCA_RECONNECT_IND_EVT event.
** If the response is successful, a data channel is open.
** When the data channel is open successfully, a MCA_OPEN_IND_EVT
** is reported.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_ReconnectMdlRsp(tMCA_CL mcl, tMCA_DEP dep,
UINT16 mdl_id, UINT8 rsp_code,
const tMCA_CHNL_CFG *p_chnl_cfg);
/*******************************************************************************
**
** Function MCA_DataChnlCfg
**
** Description This function initiates a data channel connection toward the
** connected peer device.
** When the data channel is open successfully, a MCA_OPEN_CFM_EVT
** is reported. This data channel is identified as tMCA_DL.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_DataChnlCfg(tMCA_CL mcl, const tMCA_CHNL_CFG *p_chnl_cfg);
/*******************************************************************************
**
** Function MCA_Abort
**
** Description This function sends a ABORT_MDL request to the peer device.
** When the response is received, a MCA_ABORT_CFM_EVT is reported.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_Abort(tMCA_CL mcl);
/*******************************************************************************
**
** Function MCA_Delete
**
** Description This function sends a DELETE_MDL request to the peer device.
** When the response is received, a MCA_DELETE_CFM_EVT is reported.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_Delete(tMCA_CL mcl, UINT16 mdl_id);
/*******************************************************************************
**
** Function MCA_WriteReq
**
** Description Send a data packet to the peer device.
**
** The application passes the packet using the BT_HDR structure.
** The offset field must be equal to or greater than L2CAP_MIN_OFFSET.
** This allows enough space in the buffer for the L2CAP header.
**
** The memory pointed to by p_pkt must be a GKI buffer
** allocated by the application. This buffer will be freed
** by the protocol stack; the application must not free
** this buffer.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern tMCA_RESULT MCA_WriteReq(tMCA_DL mdl, BT_HDR *p_pkt);
/*******************************************************************************
**
** Function MCA_GetL2CapChannel
**
** Description Get the L2CAP CID used by the given data channel handle.
**
** Returns L2CAP channel ID if successful, otherwise 0.
**
*******************************************************************************/
extern UINT16 MCA_GetL2CapChannel (tMCA_DL mdl);
#endif /* MCA_API_H */