/******************************************************************************
*
* Copyright (C) 2002-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This interface file contains the interface to the Audio Video
* Distribution Transport Protocol (AVDTP).
*
******************************************************************************/
#ifndef AVDT_API_H
#define AVDT_API_H
#include "bt_types.h"
#include "bt_target.h"
/*****************************************************************************
** Constants
*****************************************************************************/
#ifndef AVDT_VERSION
#define AVDT_VERSION 0x0102
#endif
#define AVDT_VERSION_SYNC 0x0103
/* API function return value result codes. */
#define AVDT_SUCCESS 0 /* Function successful */
#define AVDT_BAD_PARAMS 1 /* Invalid parameters */
#define AVDT_NO_RESOURCES 2 /* Not enough resources */
#define AVDT_BAD_HANDLE 3 /* Bad handle */
#define AVDT_BUSY 4 /* A procedure is already in progress */
#define AVDT_WRITE_FAIL 5 /* Write failed */
/* The index to access the codec type in codec_info[]. */
#define AVDT_CODEC_TYPE_INDEX 2
/* The size in bytes of a Adaptation Layer header. */
#define AVDT_AL_HDR_SIZE 3
/* The size in bytes of a media packet header. */
#define AVDT_MEDIA_HDR_SIZE 12
/* The handle is used when reporting MULTI_AV specific events */
#define AVDT_MULTI_AV_HANDLE 0xFF
/* The number of bytes needed by the protocol stack for the protocol headers
** of a media packet. This is the size of the media packet header, the
** L2CAP packet header and HCI header.
*/
#define AVDT_MEDIA_OFFSET 23
/* The marker bit is used by the application to mark significant events such
** as frame boundaries in the data stream. This constant is used to check or
** set the marker bit in the m_pt parameter of an AVDT_WriteReq()
** or AVDT_DATA_IND_EVT.
*/
#define AVDT_MARKER_SET 0x80
/* SEP Type. This indicates the stream endpoint type. */
#define AVDT_TSEP_SRC 0 /* Source SEP */
#define AVDT_TSEP_SNK 1 /* Sink SEP */
/* initiator/acceptor role for adaption */
#define AVDT_INT 0 /* initiator */
#define AVDT_ACP 1 /* acceptor */
/* Media Type. This indicates the media type of the stream endpoint. */
#define AVDT_MEDIA_AUDIO 0 /* Audio SEP */
#define AVDT_MEDIA_VIDEO 1 /* Video SEP */
#define AVDT_MEDIA_MULTI 2 /* Multimedia SEP */
/* for reporting packets */
#define AVDT_RTCP_PT_SR 200 /* the packet type - SR (Sender Report) */
#define AVDT_RTCP_PT_RR 201 /* the packet type - RR (Receiver Report) */
#define AVDT_RTCP_PT_SDES 202 /* the packet type - SDES (Source Description) */
typedef UINT8 AVDT_REPORT_TYPE;
#define AVDT_RTCP_SDES_CNAME 1 /* SDES item CNAME */
#ifndef AVDT_MAX_CNAME_SIZE
#define AVDT_MAX_CNAME_SIZE 28
#endif
/* Protocol service capabilities. This indicates the protocol service
** capabilities of a stream endpoint. This value is a mask.
** Multiple values can be combined with a bitwise OR.
*/
#define AVDT_PSC_TRANS (1<<1) /* Media transport */
#define AVDT_PSC_REPORT (1<<2) /* Reporting */
#define AVDT_PSC_RECOV (1<<3) /* Recovery */
#define AVDT_PSC_HDRCMP (1<<5) /* Header compression */
#define AVDT_PSC_MUX (1<<6) /* Multiplexing */
#define AVDT_PSC_DELAY_RPT (1<<8) /* Delay Report */
/* Recovery type. This indicates the recovery type. */
#define AVDT_RECOV_RFC2733 1 /* RFC2733 recovery */
/* Header compression capabilities. This indicates the header compression
** capabilities. This value is a mask. Multiple values can be combined
** with a bitwise OR.
*/
#define AVDT_HDRCMP_MEDIA (1<<5) /* Available for media packets */
#define AVDT_HDRCMP_RECOV (1<<6) /* Available for recovery packets */
#define AVDT_HDRCMP_BACKCH (1<<7) /* Back channel supported */
/* Multiplexing capabilities mask. */
#define AVDT_MUX_FRAG (1<<7) /* Allow Adaptation Layer Fragmentation */
/* Application service category. This indicates the application
** service category.
*/
#define AVDT_ASC_PROTECT 4 /* Content protection */
#define AVDT_ASC_CODEC 7 /* Codec */
/* Error codes. The following are error codes defined in the AVDTP and GAVDP
** specifications. These error codes communicate protocol errors between
** AVDTP and the application. More detailed descriptions of the error codes
** and their appropriate use can be found in the AVDTP and GAVDP specifications.
** These error codes are unrelated to the result values returned by the
** AVDTP API functions.
*/
#define AVDT_ERR_HEADER 0x01 /* Bad packet header format */
#define AVDT_ERR_LENGTH 0x11 /* Bad packet length */
#define AVDT_ERR_SEID 0x12 /* Invalid SEID */
#define AVDT_ERR_IN_USE 0x13 /* The SEP is in use */
#define AVDT_ERR_NOT_IN_USE 0x14 /* The SEP is not in use */
#define AVDT_ERR_CATEGORY 0x17 /* Bad service category */
#define AVDT_ERR_PAYLOAD 0x18 /* Bad payload format */
#define AVDT_ERR_NSC 0x19 /* Requested command not supported */
#define AVDT_ERR_INVALID_CAP 0x1A /* Reconfigure attempted invalid capabilities */
#define AVDT_ERR_RECOV_TYPE 0x22 /* Requested recovery type not defined */
#define AVDT_ERR_MEDIA_TRANS 0x23 /* Media transport capability not correct */
#define AVDT_ERR_RECOV_FMT 0x25 /* Recovery service capability not correct */
#define AVDT_ERR_ROHC_FMT 0x26 /* Header compression service capability not correct */
#define AVDT_ERR_CP_FMT 0x27 /* Content protection service capability not correct */
#define AVDT_ERR_MUX_FMT 0x28 /* Multiplexing service capability not correct */
#define AVDT_ERR_UNSUP_CFG 0x29 /* Configuration not supported */
#define AVDT_ERR_BAD_STATE 0x31 /* Message cannot be processed in this state */
#define AVDT_ERR_REPORT_FMT 0x65 /* Report service capability not correct */
#define AVDT_ERR_SERVICE 0x80 /* Invalid service category */
#define AVDT_ERR_RESOURCE 0x81 /* Insufficient resources */
#define AVDT_ERR_INVALID_MCT 0xC1 /* Invalid Media Codec Type */
#define AVDT_ERR_UNSUP_MCT 0xC2 /* Unsupported Media Codec Type */
#define AVDT_ERR_INVALID_LEVEL 0xC3 /* Invalid Level */
#define AVDT_ERR_UNSUP_LEVEL 0xC4 /* Unsupported Level */
#define AVDT_ERR_INVALID_CP 0xE0 /* Invalid Content Protection Type */
#define AVDT_ERR_INVALID_FORMAT 0xE1 /* Invalid Content Protection format */
/* Additional error codes. This indicates error codes used by AVDTP
** in addition to the ones defined in the specifications.
*/
#define AVDT_ERR_CONNECT 0x07 /* Connection failed. */
#define AVDT_ERR_TIMEOUT 0x08 /* Response timeout. */
/* Control callback events. */
#define AVDT_DISCOVER_CFM_EVT 0 /* Discover confirm */
#define AVDT_GETCAP_CFM_EVT 1 /* Get capabilities confirm */
#define AVDT_OPEN_CFM_EVT 2 /* Open confirm */
#define AVDT_OPEN_IND_EVT 3 /* Open indication */
#define AVDT_CONFIG_IND_EVT 4 /* Configuration indication */
#define AVDT_START_CFM_EVT 5 /* Start confirm */
#define AVDT_START_IND_EVT 6 /* Start indication */
#define AVDT_SUSPEND_CFM_EVT 7 /* Suspend confirm */
#define AVDT_SUSPEND_IND_EVT 8 /* Suspend indication */
#define AVDT_CLOSE_CFM_EVT 9 /* Close confirm */
#define AVDT_CLOSE_IND_EVT 10 /* Close indication */
#define AVDT_RECONFIG_CFM_EVT 11 /* Reconfiguration confirm */
#define AVDT_RECONFIG_IND_EVT 12 /* Reconfiguration indication */
#define AVDT_SECURITY_CFM_EVT 13 /* Security confirm */
#define AVDT_SECURITY_IND_EVT 14 /* Security indication */
#define AVDT_WRITE_CFM_EVT 15 /* Write confirm */
#define AVDT_CONNECT_IND_EVT 16 /* Signaling channel connected */
#define AVDT_DISCONNECT_IND_EVT 17 /* Signaling channel disconnected */
#define AVDT_REPORT_CONN_EVT 18 /* Reporting channel connected */
#define AVDT_REPORT_DISCONN_EVT 19 /* Reporting channel disconnected */
#define AVDT_DELAY_REPORT_EVT 20 /* Delay report received */
#define AVDT_DELAY_REPORT_CFM_EVT 21 /* Delay report response received */
#define AVDT_MAX_EVT (AVDT_DELAY_REPORT_CFM_EVT)
/* PSM for AVDT */
#define AVDT_PSM 0x0019
/* Nonsupported protocol command messages. This value is used in tAVDT_CS */
#define AVDT_NSC_SUSPEND 0x01 /* Suspend command not supported */
#define AVDT_NSC_RECONFIG 0x02 /* Reconfigure command not supported */
#define AVDT_NSC_SECURITY 0x04 /* Security command not supported */
/*****************************************************************************
** Type Definitions
*****************************************************************************/
typedef struct
{
UINT32 ntp_sec; /* NTP time: seconds relative to 0h UTC on 1 January 1900 */
UINT32 ntp_frac; /* NTP time: the fractional part */
UINT32 rtp_time; /* timestamp in RTP header */
UINT32 pkt_count; /* sender's packet count: since starting transmission
* up until the time this SR packet was generated. */
UINT32 octet_count; /* sender's octet count: same comment */
} tAVDT_SENDER_INFO;
typedef struct
{
UINT8 frag_lost; /* fraction lost since last RR */
UINT32 packet_lost; /* cumulative number of packets lost since the beginning */
UINT32 seq_num_rcvd; /* extended highest sequence number received */
UINT32 jitter; /* interarrival jitter */
UINT32 lsr; /* last SR timestamp */
UINT32 dlsr; /* delay since last SR */
} tAVDT_REPORT_BLK;
typedef union
{
tAVDT_SENDER_INFO sr;
tAVDT_REPORT_BLK rr;
UINT8 cname[AVDT_MAX_CNAME_SIZE + 1];
} tAVDT_REPORT_DATA;
/* This structure contains parameters which are set at registration. */
typedef struct {
UINT16 ctrl_mtu; /* L2CAP MTU of the AVDTP signaling channel */
UINT8 ret_tout; /* AVDTP signaling retransmission timeout */
UINT8 sig_tout; /* AVDTP signaling message timeout */
UINT8 idle_tout; /* AVDTP idle signaling channel timeout */
UINT8 sec_mask; /* Security mask for BTM_SetSecurityLevel() */
} tAVDT_REG;
/* This structure contains the SEP information. This information is
** transferred during the discovery procedure.
*/
typedef struct {
BOOLEAN in_use; /* TRUE if stream is currently in use */
UINT8 seid; /* Stream endpoint identifier */
UINT8 media_type; /* Media type */
UINT8 tsep; /* SEP type */
} tAVDT_SEP_INFO;
/* This structure contains the SEP configuration. */
typedef struct {
UINT8 codec_info[AVDT_CODEC_SIZE]; /* Codec capabilities array */
UINT8 protect_info[AVDT_PROTECT_SIZE]; /* Content protection capabilities */
UINT8 num_codec; /* Number of media codec information elements */
UINT8 num_protect; /* Number of content protection information elements */
UINT16 psc_mask; /* Protocol service capabilities mask */
UINT8 recov_type; /* Recovery type */
UINT8 recov_mrws; /* Maximum recovery window size */
UINT8 recov_mnmp; /* Recovery maximum number of media packets */
UINT8 hdrcmp_mask; /* Header compression capabilities */
#if AVDT_MULTIPLEXING == TRUE
UINT8 mux_mask; /* Multiplexing capabilities. AVDT_MUX_XXX bits can be combined with a bitwise OR */
UINT8 mux_tsid_media; /* TSID for media transport session */
UINT8 mux_tcid_media; /* TCID for media transport session */
UINT8 mux_tsid_report; /* TSID for reporting transport session */
UINT8 mux_tcid_report; /* TCID for reporting transport session */
UINT8 mux_tsid_recov; /* TSID for recovery transport session */
UINT8 mux_tcid_recov; /* TCID for recovery transport session */
#endif
} tAVDT_CFG;
/* Header structure for callback event parameters. */
typedef struct {
UINT8 err_code; /* Zero if operation succeeded; nonzero if operation failed */
UINT8 err_param; /* Error parameter included for some events */
UINT8 label; /* Transaction label */
UINT8 seid; /* For internal use only */
UINT8 sig_id; /* For internal use only */
UINT8 ccb_idx; /* For internal use only */
} tAVDT_EVT_HDR;
/* This data structure is associated with the AVDT_GETCAP_CFM_EVT,
** AVDT_RECONFIG_IND_EVT, and AVDT_RECONFIG_CFM_EVT.
*/
typedef struct {
tAVDT_EVT_HDR hdr; /* Event header */
tAVDT_CFG *p_cfg; /* Pointer to configuration for this SEP */
} tAVDT_CONFIG;
/* This data structure is associated with the AVDT_CONFIG_IND_EVT. */
typedef struct {
tAVDT_EVT_HDR hdr; /* Event header */
tAVDT_CFG *p_cfg; /* Pointer to configuration for this SEP */
UINT8 int_seid; /* Stream endpoint ID of stream initiating the operation */
} tAVDT_SETCONFIG;
/* This data structure is associated with the AVDT_OPEN_IND_EVT and AVDT_OPEN_CFM_EVT. */
typedef struct {
tAVDT_EVT_HDR hdr; /* Event header */
UINT16 peer_mtu; /* Transport channel L2CAP MTU of the peer */
UINT16 lcid; /* L2CAP LCID for media channel */
} tAVDT_OPEN;
/* This data structure is associated with the AVDT_SECURITY_IND_EVT
** and AVDT_SECURITY_CFM_EVT.
*/
typedef struct {
tAVDT_EVT_HDR hdr; /* Event header */
UINT8 *p_data; /* Pointer to security data */
UINT16 len; /* Length in bytes of the security data */
} tAVDT_SECURITY;
/* This data structure is associated with the AVDT_DISCOVER_CFM_EVT. */
typedef struct {
tAVDT_EVT_HDR hdr; /* Event header */
tAVDT_SEP_INFO *p_sep_info; /* Pointer to SEP information */
UINT8 num_seps; /* Number of stream endpoints */
} tAVDT_DISCOVER;
/* This data structure is associated with the AVDT_DELAY_REPORT_EVT. */
typedef struct {
tAVDT_EVT_HDR hdr; /* Event header */
UINT16 delay; /* Delay value */
} tAVDT_DELAY_RPT;
/* Union of all control callback event data structures */
typedef union {
tAVDT_EVT_HDR hdr;
tAVDT_DISCOVER discover_cfm;
tAVDT_CONFIG getcap_cfm;
tAVDT_OPEN open_cfm;
tAVDT_OPEN open_ind;
tAVDT_SETCONFIG config_ind;
tAVDT_EVT_HDR start_cfm;
tAVDT_EVT_HDR suspend_cfm;
tAVDT_EVT_HDR close_cfm;
tAVDT_CONFIG reconfig_cfm;
tAVDT_CONFIG reconfig_ind;
tAVDT_SECURITY security_cfm;
tAVDT_SECURITY security_ind;
tAVDT_EVT_HDR connect_ind;
tAVDT_EVT_HDR disconnect_ind;
tAVDT_EVT_HDR report_conn;
tAVDT_DELAY_RPT delay_rpt_cmd;
} tAVDT_CTRL;
/* This is the control callback function. This function passes control events
** to the application. This function is required for all registered stream
** endpoints and for the AVDT_DiscoverReq() and AVDT_GetCapReq() functions.
**
*/
typedef void (tAVDT_CTRL_CBACK)(UINT8 handle, BD_ADDR bd_addr, UINT8 event,
tAVDT_CTRL *p_data);
/* This is the data callback function. It is executed when AVDTP has a media
** packet ready for the application. This function is required for SNK
** endpoints and not applicable for SRC endpoints.
*/
typedef void (tAVDT_DATA_CBACK)(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp,
UINT8 m_pt);
#if AVDT_MULTIPLEXING == TRUE
/* This is the second version of the data callback function. This version uses
** application buffer assigned by AVDT_SetMediaBuf. Caller can assign different
** buffer during callback or can leave the current buffer for further using.
** This callback is called when AVDTP has a media packet ready for the application.
** This function is required for SNK endpoints and not applicable for SRC endpoints.
*/
typedef void (tAVDT_MEDIA_CBACK)(UINT8 handle, UINT8 *p_payload, UINT32 payload_len,
UINT32 time_stamp, UINT16 seq_num, UINT8 m_pt, UINT8 marker);
#endif
#if AVDT_REPORTING == TRUE
/* This is the report callback function. It is executed when AVDTP has a reporting
** packet ready for the application. This function is required for streams
** created with AVDT_PSC_REPORT.
*/
typedef void (tAVDT_REPORT_CBACK)(UINT8 handle, AVDT_REPORT_TYPE type,
tAVDT_REPORT_DATA *p_data);
#endif
typedef UINT16 (tAVDT_GETCAP_REQ) (BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback);
/* This structure contains information required when a stream is created.
** It is passed to the AVDT_CreateStream() function.
*/
typedef struct {
tAVDT_CFG cfg; /* SEP configuration */
tAVDT_CTRL_CBACK *p_ctrl_cback; /* Control callback function */
tAVDT_DATA_CBACK *p_data_cback; /* Data callback function */
#if AVDT_MULTIPLEXING == TRUE
tAVDT_MEDIA_CBACK *p_media_cback; /* Media callback function. It will be called only if p_data_cback is NULL */
#endif
#if AVDT_REPORTING == TRUE
tAVDT_REPORT_CBACK *p_report_cback;/* Report callback function. */
#endif
UINT16 mtu; /* The L2CAP MTU of the transport channel */
UINT16 flush_to; /* The L2CAP flush timeout of the transport channel */
UINT8 tsep; /* SEP type */
UINT8 media_type; /* Media type */
UINT16 nsc_mask; /* Nonsupported protocol command messages */
} tAVDT_CS;
/* AVDT data option mask is used in the write request */
#define AVDT_DATA_OPT_NONE 0x00 /* No option still add RTP header */
#define AVDT_DATA_OPT_NO_RTP (0x01 << 0) /* Skip adding RTP header */
typedef UINT8 tAVDT_DATA_OPT_MASK;
/*****************************************************************************
** External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif
/*******************************************************************************
**
** Function AVDT_Register
**
** Description This is the system level registration function for the
** AVDTP protocol. This function initializes AVDTP and
** prepares the protocol stack for its use. This function
** must be called once by the system or platform using AVDTP
** before the other functions of the API an be used.
**
**
** Returns void
**
*******************************************************************************/
extern void AVDT_Register(tAVDT_REG *p_reg, tAVDT_CTRL_CBACK *p_cback);
/*******************************************************************************
**
** Function AVDT_Deregister
**
** Description This function is called to deregister use AVDTP protocol.
** It is called when AVDTP is no longer being used by any
** application in the system. Before this function can be
** called, all streams must be removed with AVDT_RemoveStream().
**
**
** Returns void
**
*******************************************************************************/
extern void AVDT_Deregister(void);
/*******************************************************************************
**
** Function AVDT_SINK_Activate
**
** Description Activate SEP of A2DP Sink. In Use parameter is adjusted.
** In Use will be made false in case of activation. A2DP SRC
** will receive in_use as false and can open A2DP Sink
** connection
**
** Returns void
**
*******************************************************************************/
extern void AVDT_SINK_Activate(void);
/*******************************************************************************
**
** Function AVDT_SINK_Deactivate
**
** Description Deactivate SEP of A2DP Sink. In Use parameter is adjusted.
** In Use will be made TRUE in case of activation. A2DP SRC
** will receive in_use as true and will not open A2DP Sink
** connection
**
** Returns void.
**
*******************************************************************************/
extern void AVDT_SINK_Deactivate(void);
/*******************************************************************************
**
** Function AVDT_AbortReq
**
** Description Trigger Abort request to pass AVDTP Abort related mandatory
** PTS Test case.
**
** Returns void.
**
*******************************************************************************/
extern void AVDT_AbortReq(UINT8 handle);
/*******************************************************************************
**
** Function AVDT_CreateStream
**
** Description Create a stream endpoint. After a stream endpoint is
** created an application can initiate a connection between
** this endpoint and an endpoint on a peer device. In
** addition, a peer device can discover, get the capabilities,
** and connect to this endpoint.
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_CreateStream(UINT8 *p_handle, tAVDT_CS *p_cs);
/*******************************************************************************
**
** Function AVDT_RemoveStream
**
** Description Remove a stream endpoint. This function is called when
** the application is no longer using a stream endpoint.
** If this function is called when the endpoint is connected
** the connection is closed and then the stream endpoint
** is removed.
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_RemoveStream(UINT8 handle);
/*******************************************************************************
**
** Function AVDT_DiscoverReq
**
** Description This function initiates a connection to the AVDTP service
** on the peer device, if not already present, and discovers
** the stream endpoints on the peer device. (Please note
** that AVDTP discovery is unrelated to SDP discovery).
** This function can be called at any time regardless of whether
** there is an AVDTP connection to the peer device.
**
** When discovery is complete, an AVDT_DISCOVER_CFM_EVT
** is sent to the application via its callback function.
** The application must not call AVDT_GetCapReq() or
** AVDT_DiscoverReq() again to the same device until
** discovery is complete.
**
** The memory addressed by sep_info is allocated by the
** application. This memory is written to by AVDTP as part
** of the discovery procedure. This memory must remain
** accessible until the application receives the
** AVDT_DISCOVER_CFM_EVT.
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_DiscoverReq(BD_ADDR bd_addr, tAVDT_SEP_INFO *p_sep_info,
UINT8 max_seps, tAVDT_CTRL_CBACK *p_cback);
/*******************************************************************************
**
** Function AVDT_GetCapReq
**
** Description This function initiates a connection to the AVDTP service
** on the peer device, if not already present, and gets the
** capabilities of a stream endpoint on the peer device.
** This function can be called at any time regardless of
** whether there is an AVDTP connection to the peer device.
**
** When the procedure is complete, an AVDT_GETCAP_CFM_EVT is
** sent to the application via its callback function. The
** application must not call AVDT_GetCapReq() or
** AVDT_DiscoverReq() again until the procedure is complete.
**
** The memory pointed to by p_cfg is allocated by the
** application. This memory is written to by AVDTP as part
** of the get capabilities procedure. This memory must
** remain accessible until the application receives
** the AVDT_GETCAP_CFM_EVT.
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_GetCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg,
tAVDT_CTRL_CBACK *p_cback);
/*******************************************************************************
**
** Function AVDT_GetAllCapReq
**
** Description This function initiates a connection to the AVDTP service
** on the peer device, if not already present, and gets the
** capabilities of a stream endpoint on the peer device.
** This function can be called at any time regardless of
** whether there is an AVDTP connection to the peer device.
**
** When the procedure is complete, an AVDT_GETCAP_CFM_EVT is
** sent to the application via its callback function. The
** application must not call AVDT_GetCapReq() or
** AVDT_DiscoverReq() again until the procedure is complete.
**
** The memory pointed to by p_cfg is allocated by the
** application. This memory is written to by AVDTP as part
** of the get capabilities procedure. This memory must
** remain accessible until the application receives
** the AVDT_GETCAP_CFM_EVT.
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_GetAllCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg,
tAVDT_CTRL_CBACK *p_cback);
/*******************************************************************************
**
** Function AVDT_DelayReport
**
** Description This functions sends a Delay Report to the peer device
** that is associated with a particular SEID.
** This function is called by SNK device.
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_DelayReport(UINT8 handle, UINT8 seid, UINT16 delay);
/*******************************************************************************
**
** Function AVDT_OpenReq
**
** Description This function initiates a connection to the AVDTP service
** on the peer device, if not already present, and connects
** to a stream endpoint on a peer device. When the connection
** is completed, an AVDT_OPEN_CFM_EVT is sent to the
** application via the control callback function for this handle.
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_OpenReq(UINT8 handle, BD_ADDR bd_addr, UINT8 seid,
tAVDT_CFG *p_cfg);
/*******************************************************************************
**
** Function AVDT_ConfigRsp
**
** Description Respond to a configure request from the peer device. This
** function must be called if the application receives an
** AVDT_CONFIG_IND_EVT through its control callback.
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_ConfigRsp(UINT8 handle, UINT8 label, UINT8 error_code,
UINT8 category);
/*******************************************************************************
**
** Function AVDT_StartReq
**
** Description Start one or more stream endpoints. This initiates the
** transfer of media packets for the streams. All stream
** endpoints must previously be opened. When the streams
** are started, an AVDT_START_CFM_EVT is sent to the
** application via the control callback function for each stream.
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_StartReq(UINT8 *p_handles, UINT8 num_handles);
/*******************************************************************************
**
** Function AVDT_SuspendReq
**
** Description Suspend one or more stream endpoints. This suspends the
** transfer of media packets for the streams. All stream
** endpoints must previously be open and started. When the
** streams are suspended, an AVDT_SUSPEND_CFM_EVT is sent to
** the application via the control callback function for
** each stream.
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_SuspendReq(UINT8 *p_handles, UINT8 num_handles);
/*******************************************************************************
**
** Function AVDT_CloseReq
**
** Description Close a stream endpoint. This stops the transfer of media
** packets and closes the transport channel associated with
** this stream endpoint. When the stream is closed, an
** AVDT_CLOSE_CFM_EVT is sent to the application via the
** control callback function for this handle.
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_CloseReq(UINT8 handle);
/*******************************************************************************
**
** Function AVDT_ReconfigReq
**
** Description Reconfigure a stream endpoint. This allows the application
** to change the codec or content protection capabilities of
** a stream endpoint after it has been opened. This function
** can only be called if the stream is opened but not started
** or if the stream has been suspended. When the procedure
** is completed, an AVDT_RECONFIG_CFM_EVT is sent to the
** application via the control callback function for this handle.
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_ReconfigReq(UINT8 handle, tAVDT_CFG *p_cfg);
/*******************************************************************************
**
** Function AVDT_ReconfigRsp
**
** Description Respond to a reconfigure request from the peer device.
** This function must be called if the application receives
** an AVDT_RECONFIG_IND_EVT through its control callback.
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_ReconfigRsp(UINT8 handle, UINT8 label, UINT8 error_code,
UINT8 category);
/*******************************************************************************
**
** Function AVDT_SecurityReq
**
** Description Send a security request to the peer device. When the
** security procedure is completed, an AVDT_SECURITY_CFM_EVT
** is sent to the application via the control callback function
** for this handle. (Please note that AVDTP security procedures
** are unrelated to Bluetooth link level security.)
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_SecurityReq(UINT8 handle, UINT8 *p_data, UINT16 len);
/*******************************************************************************
**
** Function AVDT_SecurityRsp
**
** Description Respond to a security request from the peer device.
** This function must be called if the application receives
** an AVDT_SECURITY_IND_EVT through its control callback.
** (Please note that AVDTP security procedures are unrelated
** to Bluetooth link level security.)
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_SecurityRsp(UINT8 handle, UINT8 label, UINT8 error_code,
UINT8 *p_data, UINT16 len);
/*******************************************************************************
**
** Function AVDT_WriteReq
**
** Description Send a media packet to the peer device. The stream must
** be started before this function is called. Also, this
** function can only be called if the stream is a SRC.
**
** When AVDTP has sent the media packet and is ready for the
** next packet, an AVDT_WRITE_CFM_EVT is sent to the
** application via the control callback. The application must
** wait for the AVDT_WRITE_CFM_EVT before it makes the next
** call to AVDT_WriteReq(). If the applications calls
** AVDT_WriteReq() before it receives the event the packet
** will not be sent. The application may make its first call
** to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT
** or AVDT_START_IND_EVT.
**
** The application passes the packet using the BT_HDR structure.
** This structure is described in section 2.1. The offset
** field must be equal to or greater than AVDT_MEDIA_OFFSET.
** This allows enough space in the buffer for the L2CAP and
** AVDTP headers.
**
** The memory pointed to by p_pkt must be a GKI buffer
** allocated by the application. This buffer will be freed
** by the protocol stack; the application must not free
** this buffer.
**
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_WriteReq(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp,
UINT8 m_pt);
/*******************************************************************************
**
** Function AVDT_WriteReqOpt
**
** Description Send a media packet to the peer device. The stream must
** be started before this function is called. Also, this
** function can only be called if the stream is a SRC
**
** When AVDTP has sent the media packet and is ready for the
** next packet, an AVDT_WRITE_CFM_EVT is sent to the
** application via the control callback. The application must
** wait for the AVDT_WRITE_CFM_EVT before it makes the next
** call to AVDT_WriteReq(). If the applications calls
** AVDT_WriteReq() before it receives the event the packet
** will not be sent. The application may make its first call
** to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT
** or AVDT_START_IND_EVT.
**
** The application passes the packet using the BT_HDR structure
** This structure is described in section 2.1. The offset
** field must be equal to or greater than AVDT_MEDIA_OFFSET
** (if NO_RTP is specified, L2CAP_MIN_OFFSET can be used)
** This allows enough space in the buffer for the L2CAP and
** AVDTP headers.
**
** The memory pointed to by p_pkt must be a GKI buffer
** allocated by the application. This buffer will be freed
** by the protocol stack; the application must not free
** this buffer.
**
** The opt parameter allows passing specific options like:
** - NO_RTP : do not add the RTP header to buffer
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_WriteReqOpt(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp,
UINT8 m_pt, tAVDT_DATA_OPT_MASK opt);
/*******************************************************************************
**
** Function AVDT_ConnectReq
**
** Description This function initiates an AVDTP signaling connection
** to the peer device. When the connection is completed, an
** AVDT_CONNECT_IND_EVT is sent to the application via its
** control callback function. If the connection attempt fails
** an AVDT_DISCONNECT_IND_EVT is sent. The security mask
** parameter overrides the outgoing security mask set in
** AVDT_Register().
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_ConnectReq(BD_ADDR bd_addr, UINT8 sec_mask,
tAVDT_CTRL_CBACK *p_cback);
/*******************************************************************************
**
** Function AVDT_DisconnectReq
**
** Description This function disconnect an AVDTP signaling connection
** to the peer device. When disconnected an
** AVDT_DISCONNECT_IND_EVT is sent to the application via its
** control callback function.
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_DisconnectReq(BD_ADDR bd_addr, tAVDT_CTRL_CBACK *p_cback);
/*******************************************************************************
**
** Function AVDT_GetL2CapChannel
**
** Description Get the L2CAP CID used by the handle.
**
** Returns CID if successful, otherwise 0.
**
*******************************************************************************/
extern UINT16 AVDT_GetL2CapChannel(UINT8 handle);
/*******************************************************************************
**
** Function AVDT_GetSignalChannel
**
** Description Get the L2CAP CID used by the signal channel of the given handle.
**
** Returns CID if successful, otherwise 0.
**
*******************************************************************************/
extern UINT16 AVDT_GetSignalChannel(UINT8 handle, BD_ADDR bd_addr);
/*******************************************************************************
**
** Function AVDT_SetMediaBuf
**
** Description Assigns buffer for media packets or forbids using of assigned
** buffer if argument p_buf is NULL. This function can only
** be called if the stream is a SNK.
**
** AVDTP uses this buffer to reassemble fragmented media packets.
** When AVDTP receives a complete media packet, it calls the
** p_media_cback assigned by AVDT_CreateStream().
** This function can be called during callback to assign a
** different buffer for next media packet or can leave the current
** buffer for next packet.
**
** Returns AVDT_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
extern UINT16 AVDT_SetMediaBuf(UINT8 handle, UINT8 *p_buf, UINT32 buf_len);
/*******************************************************************************
**
** Function AVDT_SendReport
**
** Description
**
**
**
** Returns
**
*******************************************************************************/
extern UINT16 AVDT_SendReport(UINT8 handle, AVDT_REPORT_TYPE type,
tAVDT_REPORT_DATA *p_data);
/******************************************************************************
**
** Function AVDT_SetTraceLevel
**
** Description Sets the trace level for AVDT. If 0xff is passed, the
** current trace level is returned.
**
** Input Parameters:
** new_level: The level to set the AVDT tracing to:
** 0xff-returns the current setting.
** 0-turns off tracing.
** >= 1-Errors.
** >= 2-Warnings.
** >= 3-APIs.
** >= 4-Events.
** >= 5-Debug.
**
** Returns The new trace level or current trace level if
** the input parameter is 0xff.
**
******************************************************************************/
extern UINT8 AVDT_SetTraceLevel (UINT8 new_level);
#ifdef __cplusplus
}
#endif
#endif /* AVDT_API_H */