page.title=Android.mk
@jd:body

<div id="qv-wrapper">
    <div id="qv">
      <h2>On this page</h2>

      <ol>
        <li><a href="#over">Overview</a></li>
        <li><a href="#basics">Basics</a></li>
        <li><a href="#var">Variables and Macros</a></li>
        <li><a href="#mdv">Module-Description Variables</a></li>
      </ol>
    </div>
  </div>


<p>This page describes the syntax of the {@code Android.mk} build file,
which glues your C and C++ source files to the Android NDK.</p>

<h2 id="over">Overview</h2>
<p>The {@code Android.mk} file resides in a subdirectory of your project's {@code jni/} directory,
and describes your sources and shared libraries to the build system. It is really a tiny GNU
makefile fragment that the build system parses once or more. The {@code Android.mk} file is useful
for defining project-wide settings that <a href="{@docRoot}ndk/guides/application_mk.html">{@code
Application.mk}</a>, the build system, and your
environment variables leave undefined. It can also override project-wide settings for specific
<i>modules</i>.</p>

<p>The syntax of the {@code Android.mk} allows you to group your sources into
<em>modules</em>. A module is either a static library, a shared library, or a standalone
executable. You can define one or more modules in each {@code Android.mk} file, and
you can use the same source file in multiple modules. The build system only places shared libraries
into your application package. In addition, static libraries can generate shared libraries.</p>

<p>In addition to packaging libraries, the build system handles a variety of other details for you.
For example, you don't need to list header files or explicit dependencies between generated files in
your {@code Android.mk} file. The NDK build system computes these relationships automatically for
you. As a result, you should be able to benefit from new toolchain/platform support in future NDK
releases without having to touch your {@code Android.mk} file.</p>

<p>The syntax of this file is very close to that used in the {@code Android.mk} files distributed with
the full <a href="https://source.android.com">Android Open Source Project</a>. While the
build system implementation that uses them is different, their similarity is an
intentional design decision aimed at making it easier for application
developers to reuse source code for external libraries.</p>

<h2 id="basics">Basics</h2>
<p>Before exploring the syntax in detail, it is useful to start by understanding the basics
of what a {@code Android.mk} file contains. This section uses the {@code Android.mk} file in the
Hello-JNI sample toward that end, explaining the role that each line in the file plays.</p>


<p>An {@code Android.mk} file must begin by defining the {@code LOCAL_PATH} variable:

<pre class="no-pretty-print">
LOCAL_PATH := $(call my-dir)
</pre>

<p>This variable indicates the location of the source files in the development tree. Here, the macro
function {@code my-dir}, provided by the build system, returns the path of the current directory
(the directory containing the {@code Android.mk} file itself).</p>

<p>The next line declares the {@code CLEAR_VARS} variable, whose value the build system provides.

<pre class="no-pretty-print">
include $(CLEAR_VARS)
</pre>

<p>The {@code CLEAR_VARS} variable points to a special GNU Makefile that clears many
{@code LOCAL_XXX} variables for you, such as {@code LOCAL_MODULE}, {@code LOCAL_SRC_FILES}, and
{@code LOCAL_STATIC_LIBRARIES}. Note that it does not clear {@code LOCAL_PATH}. This variable must
retain its value because the system parses all build control files in a single GNU Make execution
context where all variables are global. You must (re-)declare this variable before describing each
module.</p>

<p>Next, the {@code LOCAL_MODULE} variable stores the name of the module that you wish to build.
Use this variable once per module in your application.</p>

<pre class="no-pretty-print">
LOCAL_MODULE := hello-jni
</pre>

<p>Each module name must be unique and not contain any spaces. The build system, when it
generates the final shared-library file, automatically adds the proper prefix and suffix to
the name that you assign to {@code LOCAL_MODULE}. For example, the example that appears above
results in generation of a library called {@code libhello-jni.so}.</p>

<p class="note"><strong>Note:</strong> If your module's name already starts with {@code lib}, the
build system does not prepend an additional {@code lib} prefix; it takes the module name as-is, and
adds the {@code .so} extension. So a source file originally called, for example, {@code libfoo.c}
still produces a shared-object file called {@code libfoo.so}. This behavior is to support libraries
that the Android platform sources generate from {@code Android.mk} files; the names of all such
libraries start with {@code lib}.</p>

<p>The next line enumerates the source files, with spaces delimiting multiple files:</p>

<pre class="no-pretty-print">
LOCAL_SRC_FILES := hello-jni.c
</pre>

<p>The {@code LOCAL_SRC_FILES} variable must contain a list of C and/or C++ source files to build
into a module.</p>

<p>The last line helps the system tie everything together:</p>

<pre class="no-pretty-print">
include $(BUILD_SHARED_LIBRARY)
</pre>

<p>The {@code BUILD_SHARED_LIBRARY} variable points to a GNU Makefile script that collects all the
information you defined in {@code LOCAL_XXX} variables since the most recent {@code include}. This
script determines what to build, and how to do it.</p>

<p>There are more complex examples in the samples directories, with commented
{@code Android.mk} files that you can look at. In addition,
<a href="{@docRoot}ndk/samples/sample_na.html">Sample: native-activity</a> provides
a detailed explanation of that sample's {@code Android.mk} file. Finally, <a href="#var">
Variables and Macros</a> provides further information on the variables from this section.


<h2 id="var">Variables and Macros</h2>
<p>The build system provides many possible variables for use in the the {@code Android.mk} file.
Many of these variables come with preassigned values. Others, you assign.</p>

<p>In addition to these variables, you can also define your own arbitrary ones. If you do so, keep
in mind that the NDK build system reserves the following variable names:</p>
<ul>
<li>Names that begin with {@code LOCAL_}, such as {@code LOCAL_MODULE}.</li>
<li>Names that begin with {@code PRIVATE_}, {@code NDK_}, or {@code APP}. The build system uses
these internally.</li>
<li>Lower-case names, such as {@code my-dir}. The build system uses these internally, as well.</li>
</ul>
<p>If you need to define your own convenience variables in an {@code Android.mk} file, we
recommend prepending {@code MY_} to their names.


<h3 id="npv">NDK-defined variables</h3>
<p>This section discusses the GNU Make variables that the build system defines before parsing your
{@code Android.mk} file. Under certain circumstances, the NDK might parse your {@code Android.mk}
file several times, using a different definition for some of these variables each time.</p>

<h4>CLEAR_VARS</h4>
<p>This variable points to a build script that undefines nearly all {@code LOCAL_XXX} variables
listed in the "Developer-defined variables" section below. Use this variable to include
this script before describing a new module. The syntax for using it is:</p>

<pre class="no-pretty-print">
include $(CLEAR_VARS)
</pre>

<h4>BUILD_SHARED_LIBRARY</h4>
<p>This variable points to a build script that collects all the information about the module
you provided in your {@code LOCAL_XXX} variables, and determines how to build a target shared
library from the sources you listed. Note that using this script requires that you have already
assigned values to {@code LOCAL_MODULE} and {@code LOCAL_SRC_FILES}, at a minimum (for more
information about these variables, see <a href = "#mdv">Module-Description Variables</a>).</p>

<p>The syntax for using this variable is:</p>

<pre class="no-pretty-print">
include $(BUILD_SHARED_LIBRARY)
</pre>

<p>A shared-library variable causes the build system to generate a library file with a {@code .so}
extension.</p>

<h4>BUILD_STATIC_LIBRARY</h4>
<p>A variant of {@code BUILD_SHARED_LIBRARY} that is used to build a static library. The build
system does not copy static libraries into your project/packages, but it can use them to build
shared libraries (see {@code LOCAL_STATIC_LIBRARIES} and {@code LOCAL_WHOLE_STATIC_LIBRARIES},
below). The syntax for using this variable is:</p>

<pre class="no-pretty-print">
include $(BUILD_STATIC_LIBRARY)
</pre>

<p>A static-library variable causes the build system to generate a library with a {@code .a}
extension.</p>

<h4>PREBUILT_SHARED_LIBRARY</h4>
<p>Points to a build script used to specify a prebuilt shared library. Unlike in the case of
{@code BUILD_SHARED_LIBRARY} and {@code BUILD_STATIC_LIBRARY}, here the value of
{@code LOCAL_SRC_FILES} cannot be a source file. Instead, it must be a single path to a prebuilt
shared library, such as {@code foo/libfoo.so}. The syntax for using this variable is:</p>

<pre class="no-pretty-print">
include $(PREBUILT_SHARED_LIBRARY)
</pre>

<p>You can also reference a prebuilt library in another module by using the
{@code LOCAL_PREBUILTS} variable. For more information about using prebuilts, see
<a href="{@docRoot}ndk/guides/prebuilts.html">Using Prebuilt Libraries</a>.</p>


<h4>PREBUILT_STATIC_LIBRARY</h4>
<p>The same as {@code PREBUILT_SHARED_LIBRARY}, but for a prebuilt static library. For more
information about using prebuilts, see <a href="{@docRoot}ndk/guides/prebuilts.html">Using Prebuilt
Libraries</a>.</p>

<h4>TARGET_ARCH</h4>
<p>The name of the target CPU architecture as the Android Open Source Project specifies it.
For any ARM-compatible build, use {@code arm}, independent of the CPU architecture revision or
ABI (see TARGET_ARCH_ABI, below).</p>

<p>The value of this variable is taken from the APP_ABI variable that you define in the
{@code Android.mk} file, which the system reads ahead of parsing the {@code Android.mk} file.</p>

<h4>TARGET_PLATFORM</h4>
<p>The Android API level number for the build system to target.
For example, the Android 5.1 system images correspond to Android API level 22: {@code android-22}.
For a complete list of platform names and corresponding Android system
images, see <a href="{@docRoot}ndk/guides/stable_apis.html">Android NDK Native APIs</a>.
The following example shows the syntax for using this variable:</p>

<pre class="no-pretty-print">
TARGET_PLATFORM := android-22
</pre>

<h4 id="taa">TARGET_ARCH_ABI</h4>
<p>This variable stores the name of the CPU and architecture to target when the build system
parses this {@code Android.mk} file. You can specify one or more of the following values, using
a space as a delimiter between multiple targets. Table 1 shows the ABI setting to use for each
supported CPU and architecture.

<p class="table-caption" id="table1">
  <strong>Table 1.</strong> ABI settings for different CPUs and architectures.</p>
<table>
  <tr>
    <th scope="col">CPU and architecture</th>
    <th scope="col">Setting</th>
  </tr>
  <tr>
    <td>ARMv5TE</td>
    <td>{@code armeabi}</td>
  </tr>
  <tr>
    <td>ARMv7</td>
    <td>{@code armeabi-v7a}</td>
  </tr>
  <tr>
    <td>ARMv8 AArch64</td>
    <td>{@code arm64-v8a}</td>
  </tr>
  <tr>
    <td>i686</td>
    <td>{@code x86}</td>
  </tr>
  <tr>
    <td>x86-64</td>
    <td>{@code x86_64}</td>
  </tr>
  <tr>
    <td>mips32 (r1)</td>
    <td>{@code mips}</td>
  </tr>
  <tr>
    <td>mips64 (r6)</td>
    <td>{@code mips64}</td>
  </tr>
  <tr>
    <td>All</td>
    <td>{@code all}</td>
  </tr>
</table>

<p>The following example shows how to set ARMv8 AArch64 as the target CPU-and-ABI combination:</p>

<pre class="no-pretty-print">
TARGET_ARCH_ABI := arm64-v8a
</pre>

<p class="note"><strong>Note: </strong> Up to Android NDK 1.6_r1, this variable is defined as
{@code arm}.</p>

<p>For more details about architecture ABIs and associated compatibility
issues, refer to
<a href="{@docRoot}ndk/guides/abis.html">ABI Management</a>.</p>

<p>New target ABIs in the future will have different values.</p>

<h4>TARGET_ABI</h4>
<p>A concatenation of target Android API level and ABI, it is especially useful when you want to test against
a specific target system image for a real device. For example, to specify a 64-bit ARM device
running on Android API level 22:</p>

<pre class="no-pretty-print">
TARGET_ABI := android-22-arm64-v8a
</pre>

<p class="note"><strong>Note:</strong> Up to Android NDK 1.6_r1, the default value was
{@code android-3-arm}.</p>

<h2 id="mdv">Module-Description Variables</h2>
<p>The variables in this section describe your module to the build system. Each module description
should follow this basic flow:
<ul>
<ol type = "1">
<li>Initialize or undefine the variables associated with the module, using the {@code CLEAR_VARS}
  variable.</li>
<li>Assign values to the variables used to describe the module.
<li>Set the NDK build system to use the appropriate build script for the module, using the
  {@code BUILD_XXX} variable.</li>
</ol>
</ul>

<h4>LOCAL_PATH</h4>
<p>This variable is used to give the path of the current file. You must define
it at the start of your {@code Android.mk} file. The following example shows how to do so:</p>

<pre class="no-pretty-print">
LOCAL_PATH := $(call my-dir)
</pre>

<p>The script to which {@code CLEAR_VARS} points does not clear this variable. Therefore, you only need
to define it a single time, even if your {@code Android.mk} file describes multiple modules.</p>

<h4>LOCAL_MODULE</h4>
<p>This variable stores the name of your module. It must be unique among all module names,
and must not contain any spaces. You must define it before including any scripts (other than
the one for {@code CLEAR_VARS}). You need not add either the {@code lib} prefix
or the {@code .so} or {@code .a} file extension; the build system makes these modifications
automatically. Throughout your {@code Android.mk} and
<a href="{@docRoot}ndk/guides/application_mk.html">{@code Application.mk}</a> files, refer to
your module by its unmodified name. For example, the following line results in the generation of a
shared library module called {@code libfoo.so}:</p>

<pre class="no-pretty-print">
LOCAL_MODULE := "foo"
</pre>

<p>If you want the generated module to have a name other than {@code lib} + the value of
{@code LOCAL_MODULE}, you can use the {@code LOCAL_MODULE_FILENAME} variable to give the
generated module a name of your own choosing, instead.</p>

<h4>LOCAL_MODULE_FILENAME</h4>
<p>This optional variable allows you to override the names that the build system
uses by default for files that it generates. For example, if the name of your {@code LOCAL_MODULE}
is {@code foo}, you can force the system to call the file it generates {@code libnewfoo}. The
following example shows how to accomplish this:</p>

<pre class="no-pretty-print">
LOCAL_MODULE := foo
LOCAL_MODULE_FILENAME := libnewfoo
</pre>

<p>For a shared library module, this example would generate a file called {@code libnewfoo.so}.</p>

<p class="note"><strong>Note:</strong> You cannot override filepath or file extension.</p>

<h4>LOCAL_SRC_FILES</h4>
<p>This variable contains the list of source files that the build system uses to generate the
module. Only list the files that the build system actually passes to the compiler, since the build
system automatically computes any associated depencies.</p>
<p>Note that you can use both relative (to {@code LOCAL_PATH}) and absolute file paths.

<p>We recommend avoiding absolute file paths; relative paths make your {@code Android.mk} file more
portable.</p>

<p class="note"><strong>Note: </strong> Always use Unix-style forward slashes (/) in build files.
The build system does not handle Windows-style backslashes (\) properly.</p>

<h4>LOCAL_CPP_EXTENSION</h4>
<p>You can use this optional variable to indicate a file extension other than {@code .cpp} for your
C++ source files. For example, the following line changes the extension to {@code .cxx}.
(The setting must include the dot.)

<pre class="no-pretty-print">
LOCAL_CPP_EXTENSION := .cxx
</pre>

<p>From NDK r7, you can use this variable to specify multiple extensions. For instance:</p>

<pre class="no-pretty-print">
LOCAL_CPP_EXTENSION := .cxx .cpp .cc
</pre>

<h4>LOCAL_CPP_FEATURES</h4>

<p>You can use this optional variable to indicate that your code relies on specific C++ features.
It enables the right compiler and linker flags during the build process. For prebuilt binaries,
this variable also declares which features the binary depends on, thus helping ensure the final
linking works correctly. We recommend that you use this variable instead of enabling
{@code -frtti} and {@code -fexceptions} directly in your {@code LOCAL_CPPFLAGS} definition.</p>

<p>Using this variable allows the build system to use the appropriate flags for each module. Using
{@code LOCAL_CPPFLAGS} causes the compiler to use all specified flags for all modules, regardless
of actual need.</p>

For example, to indicate that your code uses RTTI (RunTime Type Information), write: </p>

<pre class="no-pretty-print">
LOCAL_CPP_FEATURES := rtti
</pre>

<p>To indicate that your code uses C++ exceptions, write:</p>

<pre class="no-pretty-print">
LOCAL_CPP_FEATURES := exceptions
</pre>

<p>You can also specify multiple values for this variable. For example:</p>

<pre class="no-pretty-print">
LOCAL_CPP_FEATURES := rtti features
</pre>

The order in which you describe the values does not matter.


<h4>LOCAL_C_INCLUDES</h4>
<p>You can use this optional variable to specify a list of paths, relative to the
NDK {@code root} directory, to add to the include search path when compiling all sources
(C, C++ and Assembly). For example: </p>

<pre class="no-pretty-print">
LOCAL_C_INCLUDES := sources/foo
</pre>

<p>Or even: </p>

<pre class="no-pretty-print">
LOCAL_C_INCLUDES := $(LOCAL_PATH)/<subdirectory>/foo
</pre>

<p>Define this variable before setting any corresponding inclusion flags via {@code LOCAL_CFLAGS}
or {@code LOCAL_CPPFLAGS}.</p>

<p>The build system also uses {@code LOCAL_C_INCLUDES} paths automatically when launching native
debugging with ndk-gdb.</p>


<h4>LOCAL_CFLAGS</h4>

<p>This optional variable sets compiler flags for the build system to pass when building C
<em>and</em> C++ source files. The ability to do so can be useful for specifying additional macro
definitions or compile options.</p>

<p>Try not to change the optimization/debugging level in your {@code Android.mk} file.
The build system can handle this setting automatically for you, using the relevant information
in the <a href="{@docRoot}ndk/guides/application_mk.html">{@code Application.mk}</a> file. Doing it
this way allows the build system to generate useful data files used during debugging.</p>

<p class="note"><strong>Note: </strong>In android-ndk-1.5_r1, the corresponding flags only applied
to C source files, not C++ ones. They now match the full Android build system behavior.
(You can now use {@code LOCAL_CPPFLAGS} to specify flags for C++ sources only.)</p>

<p>It is possible to specify additional include paths by writing:

<pre class="no-pretty-print">
LOCAL_CFLAGS += -I&lt;path&gt;,
</pre>

It is better, however, to use {@code LOCAL_C_INCLUDES} for this purpose, since
doing so also makes it possible to use the paths available for native debugging with ndk-gdb.</p>


<h4>LOCAL_CPPFLAGS</h4>
<p>An optional set of compiler flags that will be passed when building C++
source files <em>only</em>. They will appear after the LOCAL_CFLAGS on the
compiler's command-line.</p>


<p class="note"><strong>Note: </strong>In android-ndk-1.5_r1, the corresponding flags applied to
both C and C++ sources. This has been corrected to match the full Android build system.
To specify flags for both C and C++ sources, use {@code LOCAL_CFLAGS}.</p>


<h4>LOCAL_STATIC_LIBRARIES</h4>

<p>This variable stores the list of static libraries modules on which the current module depends.</p>

<p>If the current module is a shared library or an executable, this variable will force
these libraries to be linked into the resulting binary.</p>

<p>If the current module is a static library, this variable simply indicates that other
modules depending on the current one will also depend on the listed
libraries.</p>

<h4>LOCAL_SHARED_LIBRARIES</h4>

<p>This variable is the list of shared libraries <em>modules</em> on which this module depends at
runtime. This information is necessary at link time, and to embed the corresponding information
in the generated file.</p>

<h4>LOCAL_WHOLE_STATIC_LIBRARIES</h4>
<p>This variable is a variant of {@code LOCAL_STATIC_LIBRARIES}, and expresses that the linker
should treat the associated library modules as <em>whole archives</em>. For more information
on whole archives, see the GNU linker's
<a href="http://ftp.gnu.org/old-gnu/Manuals/ld-2.9.1/html_node/ld_3.html">documentation</a> for the
{@code --whole-archive} flag.</p>

<p>This variable is useful when there are circular dependencies among
several static libraries. When you use this variable to build a shared library, it will force
the build system to add all object files from your static libraries to the final binary. The same
is not true, however, when generating executables.</p>


<h4>LOCAL_LDLIBS</h4>

<p>This variable contains the list of additional linker flags for use in building your shared
library or executable. It enables you to use the {@code -l} prefix to pass the name of specific
system libraries. For example, the following example tells the linker to generate a module that
links to {@code /system/lib/libz.so} at load time: </p>

<pre class="no-pretty-print">
LOCAL_LDLIBS := -lz
</pre>

<p>For the list of exposed system libraries against which you can link in this NDK release, see
<a href="stable_apis.html">Android NDK Native APIs</a>.</p>

<p class="note"><strong>Note: </strong> If you define this variable for a static library,
the build system ignores it, and {@code ndk-build} prints a warning.</p>

<h4>LOCAL_LDFLAGS</h4>

<p>The list of other linker flags for the build system to use when building your shared library
or executable. For example, the following example uses the {@code ld.bfd} linker on ARM/X86 GCC
4.6+, on which {@code ld.gold} is the default </p>

<pre class="no-pretty-print">
LOCAL_LDFLAGS += -fuse-ld=bfd
</pre>

<p class="note"><strong>Note: </strong>If you define this variable for a static library, the build
system ignores it, and ndk-build prints a warning.</p>

<h4>LOCAL_ALLOW_UNDEFINED_SYMBOLS</h4>

<p>By default, when the build system encounters an undefined reference encountered while trying to
build a shared, it will throw an <em>undefined symbol</em> error. This error can help you catch
catch bugs in your source code.</p>

<p>To disable this check, set this variable to {@code true}. Note that this setting may cause the
shared library to load at runtime.</p>

<p class="note"><strong>Note: </strong> If you define this variable for a static library,
the build system ignores it, and ndk-build prints a warning.</p>

<h4>LOCAL_ARM_MODE</h4
>
<p>By default, the build system generates ARM target binaries in <em>thumb</em> mode, where each
instruction is 16 bits wide and linked with the STL libraries in the {@code thumb/} directory.
Defining this variable as {@code arm} forces the build system to generate the module's object
files in 32-bit {@code arm} mode. The following example shows how to do this:</p>

<pre class="no-pretty-print">
LOCAL_ARM_MODE := arm
</pre>

<p>You can also instruct the build system to only build specific sources in {@code arm} mode by
appending {@code .arm} suffix to the the source filenames. For example, the following example
tells the build system to always compile {@code bar.c} in ARM mode, but to build
{@code foo.c} according to the value of {@code LOCAL_ARM_MODE}.</p>

<pre class="no-pretty-print">
LOCAL_SRC_FILES := foo.c bar.c.arm
</pre>

<p></p>

<p class="note"><strong>Note: </strong> You can also force the build system to generate ARM binaries
by setting {@code APP_OPTIM} in your
<a href="{@docRoot}ndk/guides/application_mk.html">{@code Application.mk}</a> file to {@code debug}.
Specifying {@code debug} forces an ARM build because the toolchain debugger does not handle Thumb
code properly.</p>


<h4>LOCAL_ARM_NEON</h4>
<p>This variable only matters when you are targeting the {@code armeabi-v7a} ABI. It allows the
use of ARM Advanced SIMD (NEON) GCC intrinsics in your C and C++ sources, as well as NEON
instructions in Assembly files.</p>

<p>Note that not all ARMv7-based CPUs support the NEON instruction set extensions. For this reason,
you must perform runtime detection to be able to safely use this code at runtime. For more
information, see <a href="{@docRoot}ndk/guides/cpu-arm-neon.html">NEON Support</a> and <a
href="{@docRoot}ndk/guides/cpu-features.html">The {@code cpufeatures} Library</a>.</p>

<p>Alternatively, you can use the {@code .neon} suffix to specify that the build system only
compile specific source files with NEON support. In the following example, the build system compiles
{@code foo.c} with thumb and neon support, {@code bar.c} with thumb support, and
{@code zoo.c} with support for ARM and NEON:</p>

<pre class="no-pretty-print">
LOCAL_SRC_FILES = foo.c.neon bar.c zoo.c.arm.neon
</pre>


<p>If you use both suffixes, {@code .arm} must precede {@code .neon}.</p>

<h4>LOCAL_DISABLE_NO_EXECUTE</h4>

<p>Android NDK r4 added support for the "NX bit" security feature. It is
enabled by default, but you can disable it by setting this variable to {@code true}. We do not
recommend doing so without a compelling reason.</p>

<p>This feature does not modify the ABI, and is only enabled on kernels
targeting ARMv6+ CPU devices. Machine code with this feature enabled
will run unmodified on devices running earlier CPU architectures.</p>
<p>For more information, see <a href="http://en.wikipedia.org/wiki/NX_bit">Wikipedia: NX bit</a>
and <a href="http://www.gentoo.org/proj/en/hardened/gnu-stack.xml">The GNU stack kickstart</a>.

<h4>LOCAL_DISABLE_RELRO</h4>

<p>By default, the NDK compiles code with read-only relocations and GOT
protection. This variable instructs the runtime linker to mark certain regions of memory
as read-only after relocation, making certain security exploits (such as GOT overwrites)
more difficult. Note that these protections are only effective on Android API level 16 and higher.
On lower API levels, the code will still run, but without memory protections.</p>

<p>This variable is turned on by default, but you can disable it by setting its value to
{@code true}. We do not recommend doing so without a compelling reason.</p>

<p>For more information, see
<a href="http://isisblogs.poly.edu/2011/06/01/relro-relocation-read-only/">RELRO:
RELocation Read-Only</a> and <a href="http://www.akkadia.org/drepper/nonselsec.pdf">Security
enhancements in RedHat Enterprise Linux (section 6)</a>.</p>

<h4>LOCAL_DISABLE_FORMAT_STRING_CHECKS</h4>

<p>By default, the build system compiles code with format string protection. Doing so forces a
compiler error if a non-constant format string is used in a {@code printf}-style function.</p>
<p>This protection is on by default, but you can disable it by setting the value of
this variable to {@code true}. We do not recommend doing so without a compelling reason.</p>


<h4>LOCAL_EXPORT_CFLAGS</h4>

<p>This variable records a set of C/C++ compiler flags to add to the {@code LOCAL_CFLAGS} definition
of any other module that uses this one via the {@code LOCAL_STATIC_LIBRARIES} or
{@code LOCAL_SHARED_LIBRARIES} variables.</p>

<p>For example, consider the following pair of modules: {@code foo} and {@code bar}, which depends
on {@code foo}:</p>

<pre class="no-pretty-print">
include $(CLEAR_VARS)
LOCAL_MODULE := foo
LOCAL_SRC_FILES := foo/foo.c
LOCAL_EXPORT_CFLAGS := -DFOO=1
include $(BUILD_STATIC_LIBRARY)


include $(CLEAR_VARS)
LOCAL_MODULE := bar
LOCAL_SRC_FILES := bar.c
LOCAL_CFLAGS := -DBAR=2
LOCAL_STATIC_LIBRARIES := foo
include $(BUILD_SHARED_LIBRARY)
</pre>

<p>Here, the build system passes the flags {@code -DFOO=1} and {@code -DBAR=2} to the compiler when
building {@code bar.c}. It also prepends exported flags to your your module's {@code LOCAL_CFLAGS}
so you can easily override them.</p>

In addition, the relationship among modules is transitive: If {@code zoo} depends on
{@code bar}, which in turn depends on {@code foo}, then {@code zoo} also inherits all flags
exported from {@code foo}.</p>

<p>Finally, the build system does not use exported flags when building locally (i.e., building the
module whose flags it is exporting). Thus, in the example above, it does not pass {@code -DFOO=1}
to the compiler when building {@code foo/foo.c}. To build locally, use {@code LOCAL_CFLAGS}
instead.</p>

<h4>LOCAL_EXPORT_CPPFLAGS</h4>
<p>This variable is the same as {@code LOCAL_EXPORT_CFLAGS}, but for C++ flags only.</p>

<h4>LOCAL_EXPORT_C_INCLUDES</h4>
<p>This variable is the same as {@code LOCAL_EXPORT_CFLAGS}, but for C include paths. It is useful
in cases where, for example, {@code bar.c} needs to include headers from module {@code foo}.</p>

<h4>LOCAL_EXPORT_LDFLAGS</h4>
<p>This variable is the same as {@code LOCAL_EXPORT_CFLAGS}, but for linker flags.</p>

<h4>LOCAL_EXPORT_LDLIBS</h4>
<p>This variable is the same as {@code LOCAL_EXPORT_CFLAGS}, telling the build system to pass names
of specific system libraries to the compiler. Prepend {@code -l} to the name of each library you
specify.</p>

<p>Note that the build system appends imported linker flags to the value of your module's
{@code LOCAL_LDLIBS} variable. It does this due to the way Unix linkers work.</p>

<p>This variable is typically useful when module {@code foo} is a static library
and has code that depends on a system library. You can then use {@code LOCAL_EXPORT_LDLIBS} to
to export the dependency. For example: </p>

<pre class="no-pretty-print">
include $(CLEAR_VARS)
LOCAL_MODULE := foo
LOCAL_SRC_FILES := foo/foo.c
LOCAL_EXPORT_LDLIBS := -llog
include $(BUILD_STATIC_LIBRARY)

include $(CLEAR_VARS)
LOCAL_MODULE := bar
LOCAL_SRC_FILES := bar.c
LOCAL_STATIC_LIBRARIES := foo
include $(BUILD_SHARED_LIBRARY)
</pre>

<p>In this example, the build system puts {@code -llog} at the end of the linker command when it
builds {@code libbar.so}. Doing so tells the linker that, because {@code libbar.so} depends
on {@code foo}, it also depends on the system logging library.</p>

<h4>LOCAL_SHORT_COMMANDS</h4>
<p>Set this variable to {@code true} when your module has a very high
number of sources and/or dependent static or shared libraries. Doing so forces the
build system to use {@code @} syntax for archives containing intermediate object files
or linking libraries.</p>

<p>This feature can be useful on Windows, where the command line accepts a maximum of only
of 8191 characters, which can be too small for complex projects. It also impacts the compilation of
individual source files, placing nearly all compiler flags inside list files, too.</p>

<p>Note that any value other than {@code true} will revert to the
default behaviour. You can also define {@code APP_SHORT_COMMANDS} in your
<a href="{@docRoot}ndk/guides/application_mk.html">{@code Application.mk}</a> file to force this
behavior for all modules in your project.</p>

<p>We do not recommend enabling this feature by default, since it makes the build slower.</p>


<h4>LOCAL_THIN_ARCHIVE</h4>

<p>Set this variable to {@code true} when building static libraries.
Doing so will generate a <strong>thin archive</strong>, a library file that does not contain
object files, but instead just file paths to the actual objects that it would normally
contain.</p>
<p>This is useful to reduce the size of your build output. The drawback is that
such libraries <em>cannot</em> be moved to a different location (all paths
inside them are relative).</p>
<p>Valid values are {@code true}, {@code false} or empty. A
default value can be set in your <a href="{@docRoot}ndk/guides/application_mk.html">
{@code Application.mk}</a> file through the {@code APP_THIN_ARCHIVE}

variable.</p>
<p class="note"><strong>Note:</strong> This is ignored for non-static library modules, or prebuilt
static library ones.</p>

<h4>LOCAL_FILTER_ASM</h4>
<p>Define this variable as a shell command that the build system will use to filter the
assembly files extracted or generated from the files you specified for {@code LOCAL_SRC_FILES}.</p>
<p>Defining this variable causes the following things to occur:</p>

<ul>
<ol type = "1">
<li>The build system generates a temporary assembly file from any C or C++ source file, instead of compiling them into an object file.</li>
<li>The build system executes the shell command in {@code LOCAL_FILTER_ASM}
on any temporary assembly file and on any assembly file
listed in {@code LOCAL_SRC_FILES}, thus generating another temporary assembly
file.</li>
<li>The build system compiles these filtered assembly files into an object file.</li>
</ol>
</ul>
<p>For example:</p>

<pre class="no-pretty-print">
LOCAL_SRC_FILES  := foo.c bar.S
LOCAL_FILTER_ASM :=

foo.c --1--&gt; $OBJS_DIR/foo.S.original --2--&gt; $OBJS_DIR/foo.S --3--&gt; $OBJS_DIR/foo.o
bar.S                                 --2--&gt; $OBJS_DIR/bar.S --3--&gt; $OBJS_DIR/bar.o
</pre>

<p>"1" corresponds to the compiler, "2" to the filter, and "3" to the assembler. The filter must
be a standalone shell command that takes the name of the input file as its first argument, and the
name of the output file as the second one. For example:</p>

<pre class="no-pretty-print">
myasmfilter $OBJS_DIR/foo.S.original $OBJS_DIR/foo.S
myasmfilter bar.S $OBJS_DIR/bar.S
</pre>

<h3 id="npfm">NDK-provided function macros</h2>
<p>This section explains GNU Make function macros that the NDK provides. Use
{@code $(call <function>)} to evaluate them; they return textual information.</p>

<h4>my-dir</h4>

<p>This macro returns the path of the last included makefile, which typically is the
current {@code Android.mk}'s directory. {@code my-dir} is useful for defining
{@code LOCAL_PATH} at the start of your {@code Android.mk} file. For example:</p>

<pre class="no-pretty-print">
LOCAL_PATH := $(call my-dir)
</pre>

<p>Due to the way GNU Make works, what this macro really returns is the
path of the last makefile that the build system included when parsing the build scripts. For this
reason, you should not call {@code my-dir} after including another file.</p>

<p>For example, consider the following example: </p>

<pre class="no-pretty-print">
LOCAL_PATH := $(call my-dir)

# ... declare one module

include $(LOCAL_PATH)/foo/`Android.mk`

LOCAL_PATH := $(call my-dir)

# ... declare another module
</pre>

<p>The problem here is that the second call to {@code my-dir} defines
{@code LOCAL_PATH} as {@code $PATH/foo} instead of {@code $PATH}, because that was where its
most recent include pointed.</p>

<p>You can avoid this problem by putting additional includes after everything
else in the {@code Android.mk} file. For example:</p>

<pre class="no-pretty-print">
LOCAL_PATH := $(call my-dir)

# ... declare one module

LOCAL_PATH := $(call my-dir)

# ... declare another module

# extra includes at the end of the Android.mk file
include $(LOCAL_PATH)/foo/Android.mk

</pre>

<p>If it is not feasible to structure the file in this way, save the value of the first
{@code my-dir} call into another variable. For example: </p>

<pre class="no-pretty-print">
MY_LOCAL_PATH := $(call my-dir)

LOCAL_PATH := $(MY_LOCAL_PATH)

# ... declare one module

include $(LOCAL_PATH)/foo/`Android.mk`

LOCAL_PATH := $(MY_LOCAL_PATH)

# ... declare another module
</pre>

<h4>all-subdir-makefiles</h4>

<p>Returns the list of {@code Android.mk} files located in all subdirectories of
the current {@code my-dir} path.

<p>You can use this function to provide deep-nested source directory hierarchies to the build
system. By default, the NDK only looks for files in the directory containing the
{@code Android.mk} file.</p>

<h4>this-makefile</h4>
<p>Returns the path of the current makefile (from which the build system called the function).</p>

<h4>parent-makefile</h4>
<p>Returns the path of the parent makefile in the inclusion tree (the path of the makefile that
included the current one).</p>

<h4>grand-parent-makefile</h4>
<p>Returns the path of the grandparent makefile in the inclusion tree (the path of the makefile that
included the current one).</p>

<h4>import-module</h4>
<p>A function that allows you to find and include a module's {@code Android.mk} file by the name of
the module. A typical example is as follows: </p>

<pre class="no-pretty-print">
$(call import-module,&lt;name&gt;)
</pre>

<p>In this example, the build system looks for the module tagged {@code <name>} in the list of
directories referenced that your {@code NDK_MODULE_PATH} environment variable references, and
includes its {@code Android.mk} file automatically for you.</p>