/*
* This file was generated automatically by gen-mterp.py for 'mips'.
*
* --> DO NOT EDIT <--
*/
/* File: mips/header.S */
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
Art assembly interpreter notes:
First validate assembly code by implementing ExecuteXXXImpl() style body (doesn't
handle invoke, allows higher-level code to create frame & shadow frame.
Once that's working, support direct entry code & eliminate shadow frame (and
excess locals allocation.
Some (hopefully) temporary ugliness. We'll treat rFP as pointing to the
base of the vreg array within the shadow frame. Access the other fields,
dex_pc_, method_ and number_of_vregs_ via negative offsets. For now, we'll continue
the shadow frame mechanism of double-storing object references - via rFP &
number_of_vregs_.
*/
#include "asm_support.h"
#if (__mips==32) && (__mips_isa_rev>=2)
#define MIPS32REVGE2 /* mips32r2 and greater */
#if (__mips==32) && (__mips_isa_rev>=5)
#define FPU64 /* 64 bit FPU */
#if (__mips==32) && (__mips_isa_rev>=6)
#define MIPS32REVGE6 /* mips32r6 and greater */
#endif
#endif
#endif
/* MIPS definitions and declarations
reg nick purpose
s0 rPC interpreted program counter, used for fetching instructions
s1 rFP interpreted frame pointer, used for accessing locals and args
s2 rSELF self (Thread) pointer
s3 rIBASE interpreted instruction base pointer, used for computed goto
s4 rINST first 16-bit code unit of current instruction
s6 rREFS base of object references in shadow frame (ideally, we'll get rid of this later).
*/
/* single-purpose registers, given names for clarity */
#define rPC s0
#define rFP s1
#define rSELF s2
#define rIBASE s3
#define rINST s4
#define rOBJ s5
#define rREFS s6
#define rTEMP s7
#define rARG0 a0
#define rARG1 a1
#define rARG2 a2
#define rARG3 a3
#define rRESULT0 v0
#define rRESULT1 v1
/* GP register definitions */
#define zero $0 /* always zero */
#define AT $at /* assembler temp */
#define v0 $2 /* return value */
#define v1 $3
#define a0 $4 /* argument registers */
#define a1 $5
#define a2 $6
#define a3 $7
#define t0 $8 /* temp registers (not saved across subroutine calls) */
#define t1 $9
#define t2 $10
#define t3 $11
#define t4 $12
#define t5 $13
#define t6 $14
#define t7 $15
#define ta0 $12 /* alias */
#define ta1 $13
#define ta2 $14
#define ta3 $15
#define s0 $16 /* saved across subroutine calls (callee saved) */
#define s1 $17
#define s2 $18
#define s3 $19
#define s4 $20
#define s5 $21
#define s6 $22
#define s7 $23
#define t8 $24 /* two more temp registers */
#define t9 $25
#define k0 $26 /* kernel temporary */
#define k1 $27
#define gp $28 /* global pointer */
#define sp $29 /* stack pointer */
#define s8 $30 /* one more callee saved */
#define ra $31 /* return address */
/* FP register definitions */
#define fv0 $f0
#define fv0f $f1
#define fv1 $f2
#define fv1f $f3
#define fa0 $f12
#define fa0f $f13
#define fa1 $f14
#define fa1f $f15
#define ft0 $f4
#define ft0f $f5
#define ft1 $f6
#define ft1f $f7
#define ft2 $f8
#define ft2f $f9
#define ft3 $f10
#define ft3f $f11
#define ft4 $f16
#define ft4f $f17
#define ft5 $f18
#define ft5f $f19
#define fs0 $f20
#define fs0f $f21
#define fs1 $f22
#define fs1f $f23
#define fs2 $f24
#define fs2f $f25
#define fs3 $f26
#define fs3f $f27
#define fs4 $f28
#define fs4f $f29
#define fs5 $f30
#define fs5f $f31
#ifndef MIPS32REVGE6
#define fcc0 $fcc0
#define fcc1 $fcc1
#endif
/*
* Instead of holding a pointer to the shadow frame, we keep rFP at the base of the vregs. So,
* to access other shadow frame fields, we need to use a backwards offset. Define those here.
*/
#define OFF_FP(a) (a - SHADOWFRAME_VREGS_OFFSET)
#define OFF_FP_NUMBER_OF_VREGS OFF_FP(SHADOWFRAME_NUMBER_OF_VREGS_OFFSET)
#define OFF_FP_DEX_PC OFF_FP(SHADOWFRAME_DEX_PC_OFFSET)
#define OFF_FP_LINK OFF_FP(SHADOWFRAME_LINK_OFFSET)
#define OFF_FP_METHOD OFF_FP(SHADOWFRAME_METHOD_OFFSET)
#define OFF_FP_RESULT_REGISTER OFF_FP(SHADOWFRAME_RESULT_REGISTER_OFFSET)
#define OFF_FP_DEX_PC_PTR OFF_FP(SHADOWFRAME_DEX_PC_PTR_OFFSET)
#define OFF_FP_CODE_ITEM OFF_FP(SHADOWFRAME_CODE_ITEM_OFFSET)
#define OFF_FP_SHADOWFRAME (-SHADOWFRAME_VREGS_OFFSET)
#define MTERP_PROFILE_BRANCHES 1
#define MTERP_LOGGING 0
/*
* "export" the PC to dex_pc field in the shadow frame, f/b/o future exception objects. Must
* be done *before* something throws.
*
* It's okay to do this more than once.
*
* NOTE: the fast interpreter keeps track of dex pc as a direct pointer to the mapped
* dex byte codes. However, the rest of the runtime expects dex pc to be an instruction
* offset into the code_items_[] array. For effiency, we will "export" the
* current dex pc as a direct pointer using the EXPORT_PC macro, and rely on GetDexPC
* to convert to a dex pc when needed.
*/
#define EXPORT_PC() \
sw rPC, OFF_FP_DEX_PC_PTR(rFP)
#define EXPORT_DEX_PC(tmp) \
lw tmp, OFF_FP_CODE_ITEM(rFP) \
sw rPC, OFF_FP_DEX_PC_PTR(rFP) \
addu tmp, CODEITEM_INSNS_OFFSET \
subu tmp, rPC, tmp \
sra tmp, tmp, 1 \
sw tmp, OFF_FP_DEX_PC(rFP)
/*
* Fetch the next instruction from rPC into rINST. Does not advance rPC.
*/
#define FETCH_INST() lhu rINST, (rPC)
/*
* Fetch the next instruction from the specified offset. Advances rPC
* to point to the next instruction. "_count" is in 16-bit code units.
*
* This must come AFTER anything that can throw an exception, or the
* exception catch may miss. (This also implies that it must come after
* EXPORT_PC().)
*/
#define FETCH_ADVANCE_INST(_count) lhu rINST, ((_count)*2)(rPC); \
addu rPC, rPC, ((_count) * 2)
/*
* The operation performed here is similar to FETCH_ADVANCE_INST, except the
* src and dest registers are parameterized (not hard-wired to rPC and rINST).
*/
#define PREFETCH_ADVANCE_INST(_dreg, _sreg, _count) \
lhu _dreg, ((_count)*2)(_sreg) ; \
addu _sreg, _sreg, (_count)*2
/*
* Similar to FETCH_ADVANCE_INST, but does not update rPC. Used to load
* rINST ahead of possible exception point. Be sure to manually advance rPC
* later.
*/
#define PREFETCH_INST(_count) lhu rINST, ((_count)*2)(rPC)
/* Advance rPC by some number of code units. */
#define ADVANCE(_count) addu rPC, rPC, ((_count) * 2)
/*
* Fetch the next instruction from an offset specified by rd. Updates
* rPC to point to the next instruction. "rd" must specify the distance
* in bytes, *not* 16-bit code units, and may be a signed value.
*/
#define FETCH_ADVANCE_INST_RB(rd) addu rPC, rPC, rd; \
lhu rINST, (rPC)
/*
* Fetch a half-word code unit from an offset past the current PC. The
* "_count" value is in 16-bit code units. Does not advance rPC.
*
* The "_S" variant works the same but treats the value as signed.
*/
#define FETCH(rd, _count) lhu rd, ((_count) * 2)(rPC)
#define FETCH_S(rd, _count) lh rd, ((_count) * 2)(rPC)
/*
* Fetch one byte from an offset past the current PC. Pass in the same
* "_count" as you would for FETCH, and an additional 0/1 indicating which
* byte of the halfword you want (lo/hi).
*/
#define FETCH_B(rd, _count, _byte) lbu rd, ((_count) * 2 + _byte)(rPC)
/*
* Put the instruction's opcode field into the specified register.
*/
#define GET_INST_OPCODE(rd) and rd, rINST, 0xFF
/*
* Put the prefetched instruction's opcode field into the specified register.
*/
#define GET_PREFETCHED_OPCODE(dreg, sreg) andi dreg, sreg, 255
/*
* Begin executing the opcode in rd.
*/
#define GOTO_OPCODE(rd) sll rd, rd, 7; \
addu rd, rIBASE, rd; \
jalr zero, rd
#define GOTO_OPCODE_BASE(_base, rd) sll rd, rd, 7; \
addu rd, _base, rd; \
jalr zero, rd
/*
* Get/set the 32-bit value from a Dalvik register.
*/
#define GET_VREG(rd, rix) LOAD_eas2(rd, rFP, rix)
#define GET_VREG_F(rd, rix) EAS2(AT, rFP, rix); \
.set noat; l.s rd, (AT); .set at
#define SET_VREG(rd, rix) .set noat; \
sll AT, rix, 2; \
addu t8, rFP, AT; \
sw rd, 0(t8); \
addu t8, rREFS, AT; \
.set at; \
sw zero, 0(t8)
#define SET_VREG64(rlo, rhi, rix) .set noat; \
sll AT, rix, 2; \
addu t8, rFP, AT; \
sw rlo, 0(t8); \
sw rhi, 4(t8); \
addu t8, rREFS, AT; \
.set at; \
sw zero, 0(t8); \
sw zero, 4(t8)
#ifdef FPU64
#define SET_VREG64_F(rlo, rhi, rix) .set noat; \
sll AT, rix, 2; \
addu t8, rREFS, AT; \
sw zero, 0(t8); \
sw zero, 4(t8); \
addu t8, rFP, AT; \
mfhc1 AT, rlo; \
sw AT, 4(t8); \
.set at; \
s.s rlo, 0(t8)
#else
#define SET_VREG64_F(rlo, rhi, rix) .set noat; \
sll AT, rix, 2; \
addu t8, rFP, AT; \
s.s rlo, 0(t8); \
s.s rhi, 4(t8); \
addu t8, rREFS, AT; \
.set at; \
sw zero, 0(t8); \
sw zero, 4(t8)
#endif
#define SET_VREG_OBJECT(rd, rix) .set noat; \
sll AT, rix, 2; \
addu t8, rFP, AT; \
sw rd, 0(t8); \
addu t8, rREFS, AT; \
.set at; \
sw rd, 0(t8)
/* Combination of the SET_VREG and GOTO_OPCODE functions to save 1 instruction */
#define SET_VREG_GOTO(rd, rix, dst) .set noreorder; \
sll dst, dst, 7; \
addu dst, rIBASE, dst; \
.set noat; \
sll AT, rix, 2; \
addu t8, rFP, AT; \
sw rd, 0(t8); \
addu t8, rREFS, AT; \
.set at; \
jalr zero, dst; \
sw zero, 0(t8); \
.set reorder
/* Combination of the SET_VREG64 and GOTO_OPCODE functions to save 1 instruction */
#define SET_VREG64_GOTO(rlo, rhi, rix, dst) .set noreorder; \
sll dst, dst, 7; \
addu dst, rIBASE, dst; \
.set noat; \
sll AT, rix, 2; \
addu t8, rFP, AT; \
sw rlo, 0(t8); \
sw rhi, 4(t8); \
addu t8, rREFS, AT; \
.set at; \
sw zero, 0(t8); \
jalr zero, dst; \
sw zero, 4(t8); \
.set reorder
#define SET_VREG_F(rd, rix) .set noat; \
sll AT, rix, 2; \
addu t8, rFP, AT; \
s.s rd, 0(t8); \
addu t8, rREFS, AT; \
.set at; \
sw zero, 0(t8)
#define GET_OPA(rd) srl rd, rINST, 8
#ifdef MIPS32REVGE2
#define GET_OPA4(rd) ext rd, rINST, 8, 4
#else
#define GET_OPA4(rd) GET_OPA(rd); and rd, 0xf
#endif
#define GET_OPB(rd) srl rd, rINST, 12
/*
* Form an Effective Address rd = rbase + roff<<n;
* Uses reg AT
*/
#define EASN(rd, rbase, roff, rshift) .set noat; \
sll AT, roff, rshift; \
addu rd, rbase, AT; \
.set at
#define EAS1(rd, rbase, roff) EASN(rd, rbase, roff, 1)
#define EAS2(rd, rbase, roff) EASN(rd, rbase, roff, 2)
#define EAS3(rd, rbase, roff) EASN(rd, rbase, roff, 3)
#define EAS4(rd, rbase, roff) EASN(rd, rbase, roff, 4)
/*
* Form an Effective Shift Right rd = rbase + roff>>n;
* Uses reg AT
*/
#define ESRN(rd, rbase, roff, rshift) .set noat; \
srl AT, roff, rshift; \
addu rd, rbase, AT; \
.set at
#define LOAD_eas2(rd, rbase, roff) EAS2(AT, rbase, roff); \
.set noat; lw rd, 0(AT); .set at
#define STORE_eas2(rd, rbase, roff) EAS2(AT, rbase, roff); \
.set noat; sw rd, 0(AT); .set at
#define LOAD_RB_OFF(rd, rbase, off) lw rd, off(rbase)
#define STORE_RB_OFF(rd, rbase, off) sw rd, off(rbase)
#define STORE64_off(rlo, rhi, rbase, off) sw rlo, off(rbase); \
sw rhi, (off+4)(rbase)
#define LOAD64_off(rlo, rhi, rbase, off) lw rlo, off(rbase); \
lw rhi, (off+4)(rbase)
#define STORE64(rlo, rhi, rbase) STORE64_off(rlo, rhi, rbase, 0)
#define LOAD64(rlo, rhi, rbase) LOAD64_off(rlo, rhi, rbase, 0)
#ifdef FPU64
#define STORE64_off_F(rlo, rhi, rbase, off) s.s rlo, off(rbase); \
.set noat; \
mfhc1 AT, rlo; \
sw AT, (off+4)(rbase); \
.set at
#define LOAD64_off_F(rlo, rhi, rbase, off) l.s rlo, off(rbase); \
.set noat; \
lw AT, (off+4)(rbase); \
mthc1 AT, rlo; \
.set at
#else
#define STORE64_off_F(rlo, rhi, rbase, off) s.s rlo, off(rbase); \
s.s rhi, (off+4)(rbase)
#define LOAD64_off_F(rlo, rhi, rbase, off) l.s rlo, off(rbase); \
l.s rhi, (off+4)(rbase)
#endif
#define STORE64_F(rlo, rhi, rbase) STORE64_off_F(rlo, rhi, rbase, 0)
#define LOAD64_F(rlo, rhi, rbase) LOAD64_off_F(rlo, rhi, rbase, 0)
#define LOAD_base_offMirrorArray_length(rd, rbase) LOAD_RB_OFF(rd, rbase, MIRROR_ARRAY_LENGTH_OFFSET)
#define STACK_STORE(rd, off) sw rd, off(sp)
#define STACK_LOAD(rd, off) lw rd, off(sp)
#define CREATE_STACK(n) subu sp, sp, n
#define DELETE_STACK(n) addu sp, sp, n
#define LOAD_ADDR(dest, addr) la dest, addr
#define LOAD_IMM(dest, imm) li dest, imm
#define MOVE_REG(dest, src) move dest, src
#define STACK_SIZE 128
#define STACK_OFFSET_ARG04 16
#define STACK_OFFSET_ARG05 20
#define STACK_OFFSET_ARG06 24
#define STACK_OFFSET_ARG07 28
#define STACK_OFFSET_GP 84
#define JAL(n) jal n
#define BAL(n) bal n
/*
* FP register usage restrictions:
* 1) We don't use the callee save FP registers so we don't have to save them.
* 2) We don't use the odd FP registers so we can share code with mips32r6.
*/
#define STACK_STORE_FULL() CREATE_STACK(STACK_SIZE); \
STACK_STORE(ra, 124); \
STACK_STORE(s8, 120); \
STACK_STORE(s0, 116); \
STACK_STORE(s1, 112); \
STACK_STORE(s2, 108); \
STACK_STORE(s3, 104); \
STACK_STORE(s4, 100); \
STACK_STORE(s5, 96); \
STACK_STORE(s6, 92); \
STACK_STORE(s7, 88);
#define STACK_LOAD_FULL() STACK_LOAD(gp, STACK_OFFSET_GP); \
STACK_LOAD(s7, 88); \
STACK_LOAD(s6, 92); \
STACK_LOAD(s5, 96); \
STACK_LOAD(s4, 100); \
STACK_LOAD(s3, 104); \
STACK_LOAD(s2, 108); \
STACK_LOAD(s1, 112); \
STACK_LOAD(s0, 116); \
STACK_LOAD(s8, 120); \
STACK_LOAD(ra, 124); \
DELETE_STACK(STACK_SIZE)
/* File: mips/entry.S */
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Interpreter entry point.
*/
.text
.align 2
.global ExecuteMterpImpl
.ent ExecuteMterpImpl
.frame sp, STACK_SIZE, ra
/*
* On entry:
* a0 Thread* self
* a1 code_item
* a2 ShadowFrame
* a3 JValue* result_register
*
*/
ExecuteMterpImpl:
.set noreorder
.cpload t9
.set reorder
/* Save to the stack. Frame size = STACK_SIZE */
STACK_STORE_FULL()
/* This directive will make sure all subsequent jal restore gp at a known offset */
.cprestore STACK_OFFSET_GP
/* Remember the return register */
sw a3, SHADOWFRAME_RESULT_REGISTER_OFFSET(a2)
/* Remember the code_item */
sw a1, SHADOWFRAME_CODE_ITEM_OFFSET(a2)
/* set up "named" registers */
move rSELF, a0
lw a0, SHADOWFRAME_NUMBER_OF_VREGS_OFFSET(a2)
addu rFP, a2, SHADOWFRAME_VREGS_OFFSET # point to vregs.
EAS2(rREFS, rFP, a0) # point to reference array in shadow frame
lw a0, SHADOWFRAME_DEX_PC_OFFSET(a2) # Get starting dex_pc
addu rPC, a1, CODEITEM_INSNS_OFFSET # Point to base of insns[]
EAS1(rPC, rPC, a0) # Create direct pointer to 1st dex opcode
EXPORT_PC()
/* Starting ibase */
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF)
/* start executing the instruction at rPC */
FETCH_INST() # load rINST from rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* NOTE: no fallthrough */
.global artMterpAsmInstructionStart
.type artMterpAsmInstructionStart, %function
artMterpAsmInstructionStart = .L_op_nop
.text
/* ------------------------------ */
.balign 128
.L_op_nop: /* 0x00 */
/* File: mips/op_nop.S */
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move: /* 0x01 */
/* File: mips/op_move.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
GET_OPB(a1) # a1 <- B from 15:12
GET_OPA4(a0) # a0 <- A from 11:8
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_VREG(a2, a1) # a2 <- fp[B]
GET_INST_OPCODE(t0) # t0 <- opcode from rINST
.if 0
SET_VREG_OBJECT(a2, a0) # fp[A] <- a2
.else
SET_VREG(a2, a0) # fp[A] <- a2
.endif
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_from16: /* 0x02 */
/* File: mips/op_move_from16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
FETCH(a1, 1) # a1 <- BBBB
GET_OPA(a0) # a0 <- AA
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_VREG(a2, a1) # a2 <- fp[BBBB]
GET_INST_OPCODE(t0) # extract opcode from rINST
.if 0
SET_VREG_OBJECT(a2, a0) # fp[AA] <- a2
.else
SET_VREG(a2, a0) # fp[AA] <- a2
.endif
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_16: /* 0x03 */
/* File: mips/op_move_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
FETCH(a1, 2) # a1 <- BBBB
FETCH(a0, 1) # a0 <- AAAA
FETCH_ADVANCE_INST(3) # advance rPC, load rINST
GET_VREG(a2, a1) # a2 <- fp[BBBB]
GET_INST_OPCODE(t0) # extract opcode from rINST
.if 0
SET_VREG_OBJECT(a2, a0) # fp[AAAA] <- a2
.else
SET_VREG(a2, a0) # fp[AAAA] <- a2
.endif
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_wide: /* 0x04 */
/* File: mips/op_move_wide.S */
/* move-wide vA, vB */
/* NOTE: regs can overlap, e.g. "move v6, v7" or "move v7, v6" */
GET_OPA4(a2) # a2 <- A(+)
GET_OPB(a3) # a3 <- B
EAS2(a3, rFP, a3) # a3 <- &fp[B]
LOAD64(a0, a1, a3) # a0/a1 <- fp[B]
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
SET_VREG64(a0, a1, a2) # fp[A] <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_wide_from16: /* 0x05 */
/* File: mips/op_move_wide_from16.S */
/* move-wide/from16 vAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6, v7" or "move v7, v6" */
FETCH(a3, 1) # a3 <- BBBB
GET_OPA(a2) # a2 <- AA
EAS2(a3, rFP, a3) # a3 <- &fp[BBBB]
LOAD64(a0, a1, a3) # a0/a1 <- fp[BBBB]
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
SET_VREG64(a0, a1, a2) # fp[AA] <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_wide_16: /* 0x06 */
/* File: mips/op_move_wide_16.S */
/* move-wide/16 vAAAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6, v7" or "move v7, v6" */
FETCH(a3, 2) # a3 <- BBBB
FETCH(a2, 1) # a2 <- AAAA
EAS2(a3, rFP, a3) # a3 <- &fp[BBBB]
LOAD64(a0, a1, a3) # a0/a1 <- fp[BBBB]
FETCH_ADVANCE_INST(3) # advance rPC, load rINST
SET_VREG64(a0, a1, a2) # fp[AAAA] <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_object: /* 0x07 */
/* File: mips/op_move_object.S */
/* File: mips/op_move.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
GET_OPB(a1) # a1 <- B from 15:12
GET_OPA4(a0) # a0 <- A from 11:8
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_VREG(a2, a1) # a2 <- fp[B]
GET_INST_OPCODE(t0) # t0 <- opcode from rINST
.if 1
SET_VREG_OBJECT(a2, a0) # fp[A] <- a2
.else
SET_VREG(a2, a0) # fp[A] <- a2
.endif
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_object_from16: /* 0x08 */
/* File: mips/op_move_object_from16.S */
/* File: mips/op_move_from16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
FETCH(a1, 1) # a1 <- BBBB
GET_OPA(a0) # a0 <- AA
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_VREG(a2, a1) # a2 <- fp[BBBB]
GET_INST_OPCODE(t0) # extract opcode from rINST
.if 1
SET_VREG_OBJECT(a2, a0) # fp[AA] <- a2
.else
SET_VREG(a2, a0) # fp[AA] <- a2
.endif
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_object_16: /* 0x09 */
/* File: mips/op_move_object_16.S */
/* File: mips/op_move_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
FETCH(a1, 2) # a1 <- BBBB
FETCH(a0, 1) # a0 <- AAAA
FETCH_ADVANCE_INST(3) # advance rPC, load rINST
GET_VREG(a2, a1) # a2 <- fp[BBBB]
GET_INST_OPCODE(t0) # extract opcode from rINST
.if 1
SET_VREG_OBJECT(a2, a0) # fp[AAAA] <- a2
.else
SET_VREG(a2, a0) # fp[AAAA] <- a2
.endif
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_result: /* 0x0a */
/* File: mips/op_move_result.S */
/* for: move-result, move-result-object */
/* op vAA */
GET_OPA(a2) # a2 <- AA
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
lw a0, OFF_FP_RESULT_REGISTER(rFP) # get pointer to result JType
lw a0, 0(a0) # a0 <- result.i
GET_INST_OPCODE(t0) # extract opcode from rINST
.if 0
SET_VREG_OBJECT(a0, a2) # fp[AA] <- a0
.else
SET_VREG(a0, a2) # fp[AA] <- a0
.endif
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_result_wide: /* 0x0b */
/* File: mips/op_move_result_wide.S */
/* move-result-wide vAA */
GET_OPA(a2) # a2 <- AA
lw a3, OFF_FP_RESULT_REGISTER(rFP) # get pointer to result JType
LOAD64(a0, a1, a3) # a0/a1 <- retval.j
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
SET_VREG64(a0, a1, a2) # fp[AA] <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_result_object: /* 0x0c */
/* File: mips/op_move_result_object.S */
/* File: mips/op_move_result.S */
/* for: move-result, move-result-object */
/* op vAA */
GET_OPA(a2) # a2 <- AA
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
lw a0, OFF_FP_RESULT_REGISTER(rFP) # get pointer to result JType
lw a0, 0(a0) # a0 <- result.i
GET_INST_OPCODE(t0) # extract opcode from rINST
.if 1
SET_VREG_OBJECT(a0, a2) # fp[AA] <- a0
.else
SET_VREG(a0, a2) # fp[AA] <- a0
.endif
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_move_exception: /* 0x0d */
/* File: mips/op_move_exception.S */
/* move-exception vAA */
GET_OPA(a2) # a2 <- AA
lw a3, THREAD_EXCEPTION_OFFSET(rSELF) # get exception obj
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
SET_VREG_OBJECT(a3, a2) # fp[AA] <- exception obj
GET_INST_OPCODE(t0) # extract opcode from rINST
sw zero, THREAD_EXCEPTION_OFFSET(rSELF) # clear exception
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_return_void: /* 0x0e */
/* File: mips/op_return_void.S */
.extern MterpThreadFenceForConstructor
JAL(MterpThreadFenceForConstructor)
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
beqz ra, 1f
JAL(MterpSuspendCheck) # (self)
1:
move v0, zero
move v1, zero
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return: /* 0x0f */
/* File: mips/op_return.S */
/*
* Return a 32-bit value.
*
* for: return, return-object
*/
/* op vAA */
.extern MterpThreadFenceForConstructor
JAL(MterpThreadFenceForConstructor)
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
beqz ra, 1f
JAL(MterpSuspendCheck) # (self)
1:
GET_OPA(a2) # a2 <- AA
GET_VREG(v0, a2) # v0 <- vAA
move v1, zero
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return_wide: /* 0x10 */
/* File: mips/op_return_wide.S */
/*
* Return a 64-bit value.
*/
/* return-wide vAA */
.extern MterpThreadFenceForConstructor
JAL(MterpThreadFenceForConstructor)
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
beqz ra, 1f
JAL(MterpSuspendCheck) # (self)
1:
GET_OPA(a2) # a2 <- AA
EAS2(a2, rFP, a2) # a2 <- &fp[AA]
LOAD64(v0, v1, a2) # v0/v1 <- vAA/vAA+1
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_return_object: /* 0x11 */
/* File: mips/op_return_object.S */
/* File: mips/op_return.S */
/*
* Return a 32-bit value.
*
* for: return, return-object
*/
/* op vAA */
.extern MterpThreadFenceForConstructor
JAL(MterpThreadFenceForConstructor)
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
beqz ra, 1f
JAL(MterpSuspendCheck) # (self)
1:
GET_OPA(a2) # a2 <- AA
GET_VREG(v0, a2) # v0 <- vAA
move v1, zero
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_const_4: /* 0x12 */
/* File: mips/op_const_4.S */
# const/4 vA, /* +B */
sll a1, rINST, 16 # a1 <- Bxxx0000
GET_OPA(a0) # a0 <- A+
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
sra a1, a1, 28 # a1 <- sssssssB (sign-extended)
and a0, a0, 15
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a1, a0, t0) # fp[A] <- a1
/* ------------------------------ */
.balign 128
.L_op_const_16: /* 0x13 */
/* File: mips/op_const_16.S */
# const/16 vAA, /* +BBBB */
FETCH_S(a0, 1) # a0 <- ssssBBBB (sign-extended)
GET_OPA(a3) # a3 <- AA
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, a3, t0) # vAA <- a0
/* ------------------------------ */
.balign 128
.L_op_const: /* 0x14 */
/* File: mips/op_const.S */
# const vAA, /* +BBBBbbbb */
GET_OPA(a3) # a3 <- AA
FETCH(a0, 1) # a0 <- bbbb (low)
FETCH(a1, 2) # a1 <- BBBB (high)
FETCH_ADVANCE_INST(3) # advance rPC, load rINST
sll a1, a1, 16
or a0, a1, a0 # a0 <- BBBBbbbb
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, a3, t0) # vAA <- a0
/* ------------------------------ */
.balign 128
.L_op_const_high16: /* 0x15 */
/* File: mips/op_const_high16.S */
# const/high16 vAA, /* +BBBB0000 */
FETCH(a0, 1) # a0 <- 0000BBBB (zero-extended)
GET_OPA(a3) # a3 <- AA
sll a0, a0, 16 # a0 <- BBBB0000
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, a3, t0) # vAA <- a0
/* ------------------------------ */
.balign 128
.L_op_const_wide_16: /* 0x16 */
/* File: mips/op_const_wide_16.S */
# const-wide/16 vAA, /* +BBBB */
FETCH_S(a0, 1) # a0 <- ssssBBBB (sign-extended)
GET_OPA(a3) # a3 <- AA
sra a1, a0, 31 # a1 <- ssssssss
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, a3) # vAA <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide_32: /* 0x17 */
/* File: mips/op_const_wide_32.S */
# const-wide/32 vAA, /* +BBBBbbbb */
FETCH(a0, 1) # a0 <- 0000bbbb (low)
GET_OPA(a3) # a3 <- AA
FETCH_S(a2, 2) # a2 <- ssssBBBB (high)
FETCH_ADVANCE_INST(3) # advance rPC, load rINST
sll a2, a2, 16
or a0, a0, a2 # a0 <- BBBBbbbb
sra a1, a0, 31 # a1 <- ssssssss
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, a3) # vAA <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide: /* 0x18 */
/* File: mips/op_const_wide.S */
# const-wide vAA, /* +HHHHhhhhBBBBbbbb */
FETCH(a0, 1) # a0 <- bbbb (low)
FETCH(a1, 2) # a1 <- BBBB (low middle)
FETCH(a2, 3) # a2 <- hhhh (high middle)
sll a1, 16 #
or a0, a1 # a0 <- BBBBbbbb (low word)
FETCH(a3, 4) # a3 <- HHHH (high)
GET_OPA(t1) # t1 <- AA
sll a3, 16
or a1, a3, a2 # a1 <- HHHHhhhh (high word)
FETCH_ADVANCE_INST(5) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, t1) # vAA <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_wide_high16: /* 0x19 */
/* File: mips/op_const_wide_high16.S */
# const-wide/high16 vAA, /* +BBBB000000000000 */
FETCH(a1, 1) # a1 <- 0000BBBB (zero-extended)
GET_OPA(a3) # a3 <- AA
li a0, 0 # a0 <- 00000000
sll a1, 16 # a1 <- BBBB0000
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, a3) # vAA <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_string: /* 0x1a */
/* File: mips/op_const_string.S */
# const/string vAA, String /* BBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- BBBB
GET_OPA(a1) # a1 <- AA
addu a2, rFP, OFF_FP_SHADOWFRAME # a2 <- shadow frame
move a3, rSELF
JAL(MterpConstString) # v0 <- Mterp(index, tgt_reg, shadow_frame, self)
PREFETCH_INST(2) # load rINST
bnez v0, MterpPossibleException
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_string_jumbo: /* 0x1b */
/* File: mips/op_const_string_jumbo.S */
# const/string vAA, String /* BBBBBBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- bbbb (low)
FETCH(a2, 2) # a2 <- BBBB (high)
GET_OPA(a1) # a1 <- AA
sll a2, a2, 16
or a0, a0, a2 # a0 <- BBBBbbbb
addu a2, rFP, OFF_FP_SHADOWFRAME # a2 <- shadow frame
move a3, rSELF
JAL(MterpConstString) # v0 <- Mterp(index, tgt_reg, shadow_frame, self)
PREFETCH_INST(3) # load rINST
bnez v0, MterpPossibleException
ADVANCE(3) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_const_class: /* 0x1c */
/* File: mips/op_const_class.S */
# const/class vAA, Class /* BBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- BBBB
GET_OPA(a1) # a1 <- AA
addu a2, rFP, OFF_FP_SHADOWFRAME # a2 <- shadow frame
move a3, rSELF
JAL(MterpConstClass)
PREFETCH_INST(2) # load rINST
bnez v0, MterpPossibleException
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_monitor_enter: /* 0x1d */
/* File: mips/op_monitor_enter.S */
/*
* Synchronize on an object.
*/
/* monitor-enter vAA */
EXPORT_PC()
GET_OPA(a2) # a2 <- AA
GET_VREG(a0, a2) # a0 <- vAA (object)
move a1, rSELF # a1 <- self
JAL(artLockObjectFromCode) # v0 <- artLockObject(obj, self)
bnez v0, MterpException
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_monitor_exit: /* 0x1e */
/* File: mips/op_monitor_exit.S */
/*
* Unlock an object.
*
* Exceptions that occur when unlocking a monitor need to appear as
* if they happened at the following instruction. See the Dalvik
* instruction spec.
*/
/* monitor-exit vAA */
EXPORT_PC()
GET_OPA(a2) # a2 <- AA
GET_VREG(a0, a2) # a0 <- vAA (object)
move a1, rSELF # a1 <- self
JAL(artUnlockObjectFromCode) # v0 <- artUnlockObject(obj, self)
bnez v0, MterpException
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_check_cast: /* 0x1f */
/* File: mips/op_check_cast.S */
/*
* Check to see if a cast from one class to another is allowed.
*/
# check-cast vAA, class /* BBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- BBBB
GET_OPA(a1) # a1 <- AA
EAS2(a1, rFP, a1) # a1 <- &object
lw a2, OFF_FP_METHOD(rFP) # a2 <- method
move a3, rSELF # a3 <- self
JAL(MterpCheckCast) # v0 <- CheckCast(index, &obj, method, self)
PREFETCH_INST(2)
bnez v0, MterpPossibleException
ADVANCE(2)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_instance_of: /* 0x20 */
/* File: mips/op_instance_of.S */
/*
* Check to see if an object reference is an instance of a class.
*
* Most common situation is a non-null object, being compared against
* an already-resolved class.
*/
# instance-of vA, vB, class /* CCCC */
EXPORT_PC()
FETCH(a0, 1) # a0 <- CCCC
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &object
lw a2, OFF_FP_METHOD(rFP) # a2 <- method
move a3, rSELF # a3 <- self
GET_OPA4(rOBJ) # rOBJ <- A+
JAL(MterpInstanceOf) # v0 <- Mterp(index, &obj, method, self)
lw a1, THREAD_EXCEPTION_OFFSET(rSELF)
PREFETCH_INST(2) # load rINST
bnez a1, MterpException
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(v0, rOBJ, t0) # vA <- v0
/* ------------------------------ */
.balign 128
.L_op_array_length: /* 0x21 */
/* File: mips/op_array_length.S */
/*
* Return the length of an array.
*/
GET_OPB(a1) # a1 <- B
GET_OPA4(a2) # a2 <- A+
GET_VREG(a0, a1) # a0 <- vB (object ref)
# is object null?
beqz a0, common_errNullObject # yup, fail
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- array length
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a3, a2, t0) # vA <- length
/* ------------------------------ */
.balign 128
.L_op_new_instance: /* 0x22 */
/* File: mips/op_new_instance.S */
/*
* Create a new instance of a class.
*/
# new-instance vAA, class /* BBBB */
EXPORT_PC()
addu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rSELF
move a2, rINST
JAL(MterpNewInstance)
beqz v0, MterpPossibleException
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_new_array: /* 0x23 */
/* File: mips/op_new_array.S */
/*
* Allocate an array of objects, specified with the array class
* and a count.
*
* The verifier guarantees that this is an array class, so we don't
* check for it here.
*/
/* new-array vA, vB, class@CCCC */
EXPORT_PC()
addu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rINST
move a3, rSELF
JAL(MterpNewArray)
beqz v0, MterpPossibleException
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_filled_new_array: /* 0x24 */
/* File: mips/op_filled_new_array.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, type /* BBBB */
.extern MterpFilledNewArray
EXPORT_PC()
addu a0, rFP, OFF_FP_SHADOWFRAME # a0 <- shadow frame
move a1, rPC
move a2, rSELF
JAL(MterpFilledNewArray) # v0 <- helper(shadow_frame, pc, self)
beqz v0, MterpPossibleException # has exception
FETCH_ADVANCE_INST(3) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_filled_new_array_range: /* 0x25 */
/* File: mips/op_filled_new_array_range.S */
/* File: mips/op_filled_new_array.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, type /* BBBB */
.extern MterpFilledNewArrayRange
EXPORT_PC()
addu a0, rFP, OFF_FP_SHADOWFRAME # a0 <- shadow frame
move a1, rPC
move a2, rSELF
JAL(MterpFilledNewArrayRange) # v0 <- helper(shadow_frame, pc, self)
beqz v0, MterpPossibleException # has exception
FETCH_ADVANCE_INST(3) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_fill_array_data: /* 0x26 */
/* File: mips/op_fill_array_data.S */
/* fill-array-data vAA, +BBBBBBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- bbbb (lo)
FETCH(a1, 2) # a1 <- BBBB (hi)
GET_OPA(a3) # a3 <- AA
sll a1, a1, 16 # a1 <- BBBBbbbb
or a1, a0, a1 # a1 <- BBBBbbbb
GET_VREG(a0, a3) # a0 <- vAA (array object)
EAS1(a1, rPC, a1) # a1 <- PC + BBBBbbbb*2 (array data off.)
JAL(MterpFillArrayData) # v0 <- Mterp(obj, payload)
beqz v0, MterpPossibleException # has exception
FETCH_ADVANCE_INST(3) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_throw: /* 0x27 */
/* File: mips/op_throw.S */
/*
* Throw an exception object in the current thread.
*/
/* throw vAA */
EXPORT_PC() # exception handler can throw
GET_OPA(a2) # a2 <- AA
GET_VREG(a1, a2) # a1 <- vAA (exception object)
# null object?
beqz a1, common_errNullObject # yes, throw an NPE instead
sw a1, THREAD_EXCEPTION_OFFSET(rSELF) # thread->exception <- obj
b MterpException
/* ------------------------------ */
.balign 128
.L_op_goto: /* 0x28 */
/* File: mips/op_goto.S */
/*
* Unconditional branch, 8-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto +AA */
#if MTERP_PROFILE_BRANCHES
sll a0, rINST, 16 # a0 <- AAxx0000
sra rINST, a0, 24 # rINST <- ssssssAA (sign-extended)
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
addu a2, rINST, rINST # a2 <- byte offset
FETCH_ADVANCE_INST_RB(a2) # update rPC, load rINST
/* If backwards branch refresh rIBASE */
bgez a2, 1f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
1:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
#else
sll a0, rINST, 16 # a0 <- AAxx0000
sra rINST, a0, 24 # rINST <- ssssssAA (sign-extended)
addu a2, rINST, rINST # a2 <- byte offset
FETCH_ADVANCE_INST_RB(a2) # update rPC, load rINST
/* If backwards branch refresh rIBASE */
bgez a1, 1f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
1:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
#endif
/* ------------------------------ */
.balign 128
.L_op_goto_16: /* 0x29 */
/* File: mips/op_goto_16.S */
/*
* Unconditional branch, 16-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto/16 +AAAA */
#if MTERP_PROFILE_BRANCHES
FETCH_S(rINST, 1) # rINST <- ssssAAAA (sign-extended)
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
addu a1, rINST, rINST # a1 <- byte offset, flags set
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgez a1, 1f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
1:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
#else
FETCH_S(rINST, 1) # rINST <- ssssAAAA (sign-extended)
addu a1, rINST, rINST # a1 <- byte offset, flags set
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgez a1, 1f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
1:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
#endif
/* ------------------------------ */
.balign 128
.L_op_goto_32: /* 0x2a */
/* File: mips/op_goto_32.S */
/*
* Unconditional branch, 32-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*
* Unlike most opcodes, this one is allowed to branch to itself, so
* our "backward branch" test must be "<=0" instead of "<0".
*/
/* goto/32 +AAAAAAAA */
#if MTERP_PROFILE_BRANCHES
FETCH(a0, 1) # a0 <- aaaa (lo)
FETCH(a1, 2) # a1 <- AAAA (hi)
sll a1, a1, 16
or rINST, a0, a1 # rINST <- AAAAaaaa
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
addu a1, rINST, rINST # a1 <- byte offset
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgtz a1, 1f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
1:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
#else
FETCH(a0, 1) # a0 <- aaaa (lo)
FETCH(a1, 2) # a1 <- AAAA (hi)
sll a1, a1, 16
or rINST, a0, a1 # rINST <- AAAAaaaa
addu a1, rINST, rINST # a1 <- byte offset
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgtz a1, 1f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
1:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
#endif
/* ------------------------------ */
.balign 128
.L_op_packed_switch: /* 0x2b */
/* File: mips/op_packed_switch.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
#if MTERP_PROFILE_BRANCHES
FETCH(a0, 1) # a0 <- bbbb (lo)
FETCH(a1, 2) # a1 <- BBBB (hi)
GET_OPA(a3) # a3 <- AA
sll t0, a1, 16
or a0, a0, t0 # a0 <- BBBBbbbb
GET_VREG(a1, a3) # a1 <- vAA
EAS1(a0, rPC, a0) # a0 <- PC + BBBBbbbb*2
JAL(MterpDoPackedSwitch) # a0 <- code-unit branch offset
move rINST, v0
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
addu a1, rINST, rINST # a1 <- byte offset
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgtz a1, .Lop_packed_switch_finish
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
#else
FETCH(a0, 1) # a0 <- bbbb (lo)
FETCH(a1, 2) # a1 <- BBBB (hi)
GET_OPA(a3) # a3 <- AA
sll t0, a1, 16
or a0, a0, t0 # a0 <- BBBBbbbb
GET_VREG(a1, a3) # a1 <- vAA
EAS1(a0, rPC, a0) # a0 <- PC + BBBBbbbb*2
JAL(MterpDoPackedSwitch) # a0 <- code-unit branch offset
move rINST, v0
addu a1, rINST, rINST # a1 <- byte offset
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgtz a1, 1f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
1:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
#endif
/* ------------------------------ */
.balign 128
.L_op_sparse_switch: /* 0x2c */
/* File: mips/op_sparse_switch.S */
/* File: mips/op_packed_switch.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
#if MTERP_PROFILE_BRANCHES
FETCH(a0, 1) # a0 <- bbbb (lo)
FETCH(a1, 2) # a1 <- BBBB (hi)
GET_OPA(a3) # a3 <- AA
sll t0, a1, 16
or a0, a0, t0 # a0 <- BBBBbbbb
GET_VREG(a1, a3) # a1 <- vAA
EAS1(a0, rPC, a0) # a0 <- PC + BBBBbbbb*2
JAL(MterpDoSparseSwitch) # a0 <- code-unit branch offset
move rINST, v0
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
addu a1, rINST, rINST # a1 <- byte offset
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgtz a1, .Lop_sparse_switch_finish
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
#else
FETCH(a0, 1) # a0 <- bbbb (lo)
FETCH(a1, 2) # a1 <- BBBB (hi)
GET_OPA(a3) # a3 <- AA
sll t0, a1, 16
or a0, a0, t0 # a0 <- BBBBbbbb
GET_VREG(a1, a3) # a1 <- vAA
EAS1(a0, rPC, a0) # a0 <- PC + BBBBbbbb*2
JAL(MterpDoSparseSwitch) # a0 <- code-unit branch offset
move rINST, v0
addu a1, rINST, rINST # a1 <- byte offset
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgtz a1, 1f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
1:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
#endif
/* ------------------------------ */
.balign 128
.L_op_cmpl_float: /* 0x2d */
/* File: mips/op_cmpl_float.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register rTEMP based on the results of the comparison.
*
* Provide a "naninst" instruction that puts 1 or -1 into rTEMP depending
* on what value we'd like to return when one of the operands is NaN.
*
* The operation we're implementing is:
* if (x == y)
* return 0;
* else if (x < y)
* return -1;
* else if (x > y)
* return 1;
* else
* return {-1 or 1}; // one or both operands was NaN
*
* for: cmpl-float, cmpg-float
*/
/* op vAA, vBB, vCC */
/* "clasic" form */
FETCH(a0, 1) # a0 <- CCBB
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8
GET_VREG_F(ft0, a2)
GET_VREG_F(ft1, a3)
#ifdef MIPS32REVGE6
cmp.ult.s ft2, ft0, ft1 # Is ft0 < ft1
li rTEMP, -1
bc1nez ft2, .Lop_cmpl_float_finish
cmp.ult.s ft2, ft1, ft0
li rTEMP, 1
bc1nez ft2, .Lop_cmpl_float_finish
cmp.eq.s ft2, ft0, ft1
li rTEMP, 0
bc1nez ft2, .Lop_cmpl_float_finish
b .Lop_cmpl_float_nan
#else
c.olt.s fcc0, ft0, ft1 # Is ft0 < ft1
li rTEMP, -1
bc1t fcc0, .Lop_cmpl_float_finish
c.olt.s fcc0, ft1, ft0
li rTEMP, 1
bc1t fcc0, .Lop_cmpl_float_finish
c.eq.s fcc0, ft0, ft1
li rTEMP, 0
bc1t fcc0, .Lop_cmpl_float_finish
b .Lop_cmpl_float_nan
#endif
/* ------------------------------ */
.balign 128
.L_op_cmpg_float: /* 0x2e */
/* File: mips/op_cmpg_float.S */
/* File: mips/op_cmpl_float.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register rTEMP based on the results of the comparison.
*
* Provide a "naninst" instruction that puts 1 or -1 into rTEMP depending
* on what value we'd like to return when one of the operands is NaN.
*
* The operation we're implementing is:
* if (x == y)
* return 0;
* else if (x < y)
* return -1;
* else if (x > y)
* return 1;
* else
* return {-1 or 1}; // one or both operands was NaN
*
* for: cmpl-float, cmpg-float
*/
/* op vAA, vBB, vCC */
/* "clasic" form */
FETCH(a0, 1) # a0 <- CCBB
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8
GET_VREG_F(ft0, a2)
GET_VREG_F(ft1, a3)
#ifdef MIPS32REVGE6
cmp.ult.s ft2, ft0, ft1 # Is ft0 < ft1
li rTEMP, -1
bc1nez ft2, .Lop_cmpg_float_finish
cmp.ult.s ft2, ft1, ft0
li rTEMP, 1
bc1nez ft2, .Lop_cmpg_float_finish
cmp.eq.s ft2, ft0, ft1
li rTEMP, 0
bc1nez ft2, .Lop_cmpg_float_finish
b .Lop_cmpg_float_nan
#else
c.olt.s fcc0, ft0, ft1 # Is ft0 < ft1
li rTEMP, -1
bc1t fcc0, .Lop_cmpg_float_finish
c.olt.s fcc0, ft1, ft0
li rTEMP, 1
bc1t fcc0, .Lop_cmpg_float_finish
c.eq.s fcc0, ft0, ft1
li rTEMP, 0
bc1t fcc0, .Lop_cmpg_float_finish
b .Lop_cmpg_float_nan
#endif
/* ------------------------------ */
.balign 128
.L_op_cmpl_double: /* 0x2f */
/* File: mips/op_cmpl_double.S */
/*
* Compare two floating-point values. Puts 0(==), 1(>), or -1(<)
* into the destination register (rTEMP) based on the comparison results.
*
* Provide a "naninst" instruction that puts 1 or -1 into rTEMP depending
* on what value we'd like to return when one of the operands is NaN.
*
* See op_cmpl_float for more details.
*
* For: cmpl-double, cmpg-double
*/
/* op vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
and rOBJ, a0, 255 # s5 <- BB
srl t0, a0, 8 # t0 <- CC
EAS2(rOBJ, rFP, rOBJ) # s5 <- &fp[BB]
EAS2(t0, rFP, t0) # t0 <- &fp[CC]
LOAD64_F(ft0, ft0f, rOBJ)
LOAD64_F(ft1, ft1f, t0)
#ifdef MIPS32REVGE6
cmp.ult.d ft2, ft0, ft1
li rTEMP, -1
bc1nez ft2, .Lop_cmpl_double_finish
cmp.ult.d ft2, ft1, ft0
li rTEMP, 1
bc1nez ft2, .Lop_cmpl_double_finish
cmp.eq.d ft2, ft0, ft1
li rTEMP, 0
bc1nez ft2, .Lop_cmpl_double_finish
b .Lop_cmpl_double_nan
#else
c.olt.d fcc0, ft0, ft1
li rTEMP, -1
bc1t fcc0, .Lop_cmpl_double_finish
c.olt.d fcc0, ft1, ft0
li rTEMP, 1
bc1t fcc0, .Lop_cmpl_double_finish
c.eq.d fcc0, ft0, ft1
li rTEMP, 0
bc1t fcc0, .Lop_cmpl_double_finish
b .Lop_cmpl_double_nan
#endif
/* ------------------------------ */
.balign 128
.L_op_cmpg_double: /* 0x30 */
/* File: mips/op_cmpg_double.S */
/* File: mips/op_cmpl_double.S */
/*
* Compare two floating-point values. Puts 0(==), 1(>), or -1(<)
* into the destination register (rTEMP) based on the comparison results.
*
* Provide a "naninst" instruction that puts 1 or -1 into rTEMP depending
* on what value we'd like to return when one of the operands is NaN.
*
* See op_cmpl_float for more details.
*
* For: cmpl-double, cmpg-double
*/
/* op vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
and rOBJ, a0, 255 # s5 <- BB
srl t0, a0, 8 # t0 <- CC
EAS2(rOBJ, rFP, rOBJ) # s5 <- &fp[BB]
EAS2(t0, rFP, t0) # t0 <- &fp[CC]
LOAD64_F(ft0, ft0f, rOBJ)
LOAD64_F(ft1, ft1f, t0)
#ifdef MIPS32REVGE6
cmp.ult.d ft2, ft0, ft1
li rTEMP, -1
bc1nez ft2, .Lop_cmpg_double_finish
cmp.ult.d ft2, ft1, ft0
li rTEMP, 1
bc1nez ft2, .Lop_cmpg_double_finish
cmp.eq.d ft2, ft0, ft1
li rTEMP, 0
bc1nez ft2, .Lop_cmpg_double_finish
b .Lop_cmpg_double_nan
#else
c.olt.d fcc0, ft0, ft1
li rTEMP, -1
bc1t fcc0, .Lop_cmpg_double_finish
c.olt.d fcc0, ft1, ft0
li rTEMP, 1
bc1t fcc0, .Lop_cmpg_double_finish
c.eq.d fcc0, ft0, ft1
li rTEMP, 0
bc1t fcc0, .Lop_cmpg_double_finish
b .Lop_cmpg_double_nan
#endif
/* ------------------------------ */
.balign 128
.L_op_cmp_long: /* 0x31 */
/* File: mips/op_cmp_long.S */
/*
* Compare two 64-bit values
* x = y return 0
* x < y return -1
* x > y return 1
*
* I think I can improve on the ARM code by the following observation
* slt t0, x.hi, y.hi; # (x.hi < y.hi) ? 1:0
* sgt t1, x.hi, y.hi; # (y.hi > x.hi) ? 1:0
* subu v0, t0, t1 # v0= -1:1:0 for [ < > = ]
*/
/* cmp-long vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(a3, rFP, a3) # a3 <- &fp[CC]
LOAD64(a0, a1, a2) # a0/a1 <- vBB/vBB+1
LOAD64(a2, a3, a3) # a2/a3 <- vCC/vCC+1
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
slt t0, a1, a3 # compare hi
sgt t1, a1, a3
subu v0, t1, t0 # v0 <- (-1, 1, 0)
bnez v0, .Lop_cmp_long_finish
# at this point x.hi==y.hi
sltu t0, a0, a2 # compare lo
sgtu t1, a0, a2
subu v0, t1, t0 # v0 <- (-1, 1, 0) for [< > =]
.Lop_cmp_long_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(v0, rOBJ, t0) # vAA <- v0
/* ------------------------------ */
.balign 128
.L_op_if_eq: /* 0x32 */
/* File: mips/op_if_eq.S */
/* File: mips/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
GET_OPA4(a0) # a0 <- A+
GET_OPB(a1) # a1 <- B
GET_VREG(a3, a1) # a3 <- vB
GET_VREG(a2, a0) # a2 <- vA
bne a2, a3, 1f # branch to 1 if comparison failed
FETCH_S(rINST, 1) # rINST<- branch offset, in code units
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a2, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a2) # update rPC, load rINST
bgez a2, .L_op_if_eq_finish
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
/* ------------------------------ */
.balign 128
.L_op_if_ne: /* 0x33 */
/* File: mips/op_if_ne.S */
/* File: mips/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
GET_OPA4(a0) # a0 <- A+
GET_OPB(a1) # a1 <- B
GET_VREG(a3, a1) # a3 <- vB
GET_VREG(a2, a0) # a2 <- vA
beq a2, a3, 1f # branch to 1 if comparison failed
FETCH_S(rINST, 1) # rINST<- branch offset, in code units
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a2, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a2) # update rPC, load rINST
bgez a2, .L_op_if_ne_finish
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
/* ------------------------------ */
.balign 128
.L_op_if_lt: /* 0x34 */
/* File: mips/op_if_lt.S */
/* File: mips/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
GET_OPA4(a0) # a0 <- A+
GET_OPB(a1) # a1 <- B
GET_VREG(a3, a1) # a3 <- vB
GET_VREG(a2, a0) # a2 <- vA
bge a2, a3, 1f # branch to 1 if comparison failed
FETCH_S(rINST, 1) # rINST<- branch offset, in code units
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a2, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a2) # update rPC, load rINST
bgez a2, .L_op_if_lt_finish
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
/* ------------------------------ */
.balign 128
.L_op_if_ge: /* 0x35 */
/* File: mips/op_if_ge.S */
/* File: mips/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
GET_OPA4(a0) # a0 <- A+
GET_OPB(a1) # a1 <- B
GET_VREG(a3, a1) # a3 <- vB
GET_VREG(a2, a0) # a2 <- vA
blt a2, a3, 1f # branch to 1 if comparison failed
FETCH_S(rINST, 1) # rINST<- branch offset, in code units
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a2, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a2) # update rPC, load rINST
bgez a2, .L_op_if_ge_finish
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
/* ------------------------------ */
.balign 128
.L_op_if_gt: /* 0x36 */
/* File: mips/op_if_gt.S */
/* File: mips/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
GET_OPA4(a0) # a0 <- A+
GET_OPB(a1) # a1 <- B
GET_VREG(a3, a1) # a3 <- vB
GET_VREG(a2, a0) # a2 <- vA
ble a2, a3, 1f # branch to 1 if comparison failed
FETCH_S(rINST, 1) # rINST<- branch offset, in code units
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a2, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a2) # update rPC, load rINST
bgez a2, .L_op_if_gt_finish
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
/* ------------------------------ */
.balign 128
.L_op_if_le: /* 0x37 */
/* File: mips/op_if_le.S */
/* File: mips/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
GET_OPA4(a0) # a0 <- A+
GET_OPB(a1) # a1 <- B
GET_VREG(a3, a1) # a3 <- vB
GET_VREG(a2, a0) # a2 <- vA
bgt a2, a3, 1f # branch to 1 if comparison failed
FETCH_S(rINST, 1) # rINST<- branch offset, in code units
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a2, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a2) # update rPC, load rINST
bgez a2, .L_op_if_le_finish
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
/* ------------------------------ */
.balign 128
.L_op_if_eqz: /* 0x38 */
/* File: mips/op_if_eqz.S */
/* File: mips/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
GET_OPA(a0) # a0 <- AA
GET_VREG(a2, a0) # a2 <- vAA
FETCH_S(rINST, 1) # rINST <- branch offset, in code units
bne a2, zero, 1f # branch to 1 if comparison failed
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a1, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgez a1, 3f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
3:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_nez: /* 0x39 */
/* File: mips/op_if_nez.S */
/* File: mips/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
GET_OPA(a0) # a0 <- AA
GET_VREG(a2, a0) # a2 <- vAA
FETCH_S(rINST, 1) # rINST <- branch offset, in code units
beq a2, zero, 1f # branch to 1 if comparison failed
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a1, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgez a1, 3f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
3:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_ltz: /* 0x3a */
/* File: mips/op_if_ltz.S */
/* File: mips/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
GET_OPA(a0) # a0 <- AA
GET_VREG(a2, a0) # a2 <- vAA
FETCH_S(rINST, 1) # rINST <- branch offset, in code units
bge a2, zero, 1f # branch to 1 if comparison failed
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a1, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgez a1, 3f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
3:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_gez: /* 0x3b */
/* File: mips/op_if_gez.S */
/* File: mips/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
GET_OPA(a0) # a0 <- AA
GET_VREG(a2, a0) # a2 <- vAA
FETCH_S(rINST, 1) # rINST <- branch offset, in code units
blt a2, zero, 1f # branch to 1 if comparison failed
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a1, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgez a1, 3f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
3:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_gtz: /* 0x3c */
/* File: mips/op_if_gtz.S */
/* File: mips/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
GET_OPA(a0) # a0 <- AA
GET_VREG(a2, a0) # a2 <- vAA
FETCH_S(rINST, 1) # rINST <- branch offset, in code units
ble a2, zero, 1f # branch to 1 if comparison failed
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a1, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgez a1, 3f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
3:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_if_lez: /* 0x3d */
/* File: mips/op_if_lez.S */
/* File: mips/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
GET_OPA(a0) # a0 <- AA
GET_VREG(a2, a0) # a2 <- vAA
FETCH_S(rINST, 1) # rINST <- branch offset, in code units
bgt a2, zero, 1f # branch to 1 if comparison failed
b 2f
1:
li rINST, 2 # rINST- BYTE branch dist for not-taken
2:
#if MTERP_PROFILE_BRANCHES
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpProfileBranch) # (self, shadow_frame, offset)
bnez v0, MterpOnStackReplacement # Note: offset must be in rINST
#endif
addu a1, rINST, rINST # convert to bytes
FETCH_ADVANCE_INST_RB(a1) # update rPC, load rINST
bgez a1, 3f
lw ra, THREAD_FLAGS_OFFSET(rSELF)
b MterpCheckSuspendAndContinue
3:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_unused_3e: /* 0x3e */
/* File: mips/op_unused_3e.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_3f: /* 0x3f */
/* File: mips/op_unused_3f.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_40: /* 0x40 */
/* File: mips/op_unused_40.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_41: /* 0x41 */
/* File: mips/op_unused_41.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_42: /* 0x42 */
/* File: mips/op_unused_42.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_43: /* 0x43 */
/* File: mips/op_unused_43.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_aget: /* 0x44 */
/* File: mips/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 2
EASN(a0, a0, a1, 2) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
# a1 >= a3; compare unsigned index
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
lw a2, MIRROR_INT_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a2, rOBJ, t0) # vAA <- a2
/* ------------------------------ */
.balign 128
.L_op_aget_wide: /* 0x45 */
/* File: mips/op_aget_wide.S */
/*
* Array get, 64 bits. vAA <- vBB[vCC].
*
* Arrays of long/double are 64-bit aligned.
*/
/* aget-wide vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
EAS3(a0, a0, a1) # a0 <- arrayObj + index*width
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
LOAD64_off(a2, a3, a0, MIRROR_WIDE_ARRAY_DATA_OFFSET)
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64_GOTO(a2, a3, rOBJ, t0) # vAA/vAA+1 <- a2/a3
/* ------------------------------ */
.balign 128
.L_op_aget_object: /* 0x46 */
/* File: mips/op_aget_object.S */
/*
* Array object get. vAA <- vBB[vCC].
*
* for: aget-object
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
EXPORT_PC()
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
JAL(artAGetObjectFromMterp) # v0 <- GetObj(array, index)
lw a1, THREAD_EXCEPTION_OFFSET(rSELF)
PREFETCH_INST(2) # load rINST
bnez a1, MterpException
SET_VREG_OBJECT(v0, rOBJ) # vAA <- v0
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aget_boolean: /* 0x47 */
/* File: mips/op_aget_boolean.S */
/* File: mips/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 0
EASN(a0, a0, a1, 0) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
# a1 >= a3; compare unsigned index
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
lbu a2, MIRROR_BOOLEAN_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a2, rOBJ, t0) # vAA <- a2
/* ------------------------------ */
.balign 128
.L_op_aget_byte: /* 0x48 */
/* File: mips/op_aget_byte.S */
/* File: mips/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 0
EASN(a0, a0, a1, 0) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
# a1 >= a3; compare unsigned index
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
lb a2, MIRROR_BYTE_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a2, rOBJ, t0) # vAA <- a2
/* ------------------------------ */
.balign 128
.L_op_aget_char: /* 0x49 */
/* File: mips/op_aget_char.S */
/* File: mips/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 1
EASN(a0, a0, a1, 1) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
# a1 >= a3; compare unsigned index
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
lhu a2, MIRROR_CHAR_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a2, rOBJ, t0) # vAA <- a2
/* ------------------------------ */
.balign 128
.L_op_aget_short: /* 0x4a */
/* File: mips/op_aget_short.S */
/* File: mips/op_aget.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-boolean, aget-byte, aget-char, aget-short
*
* NOTE: assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 1
EASN(a0, a0, a1, 1) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
# a1 >= a3; compare unsigned index
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
lh a2, MIRROR_SHORT_ARRAY_DATA_OFFSET(a0) # a2 <- vBB[vCC]
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a2, rOBJ, t0) # vAA <- a2
/* ------------------------------ */
.balign 128
.L_op_aput: /* 0x4b */
/* File: mips/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 2
EASN(a0, a0, a1, 2) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_VREG(a2, rOBJ) # a2 <- vAA
GET_INST_OPCODE(t0) # extract opcode from rINST
sw a2, MIRROR_INT_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_wide: /* 0x4c */
/* File: mips/op_aput_wide.S */
/*
* Array put, 64 bits. vBB[vCC] <- vAA.
*
* Arrays of long/double are 64-bit aligned, so it's okay to use STRD.
*/
/* aput-wide vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(t0) # t0 <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
EAS3(a0, a0, a1) # a0 <- arrayObj + index*width
EAS2(rOBJ, rFP, t0) # rOBJ <- &fp[AA]
# compare unsigned index, length
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
LOAD64(a2, a3, rOBJ) # a2/a3 <- vAA/vAA+1
GET_INST_OPCODE(t0) # extract opcode from rINST
STORE64_off(a2, a3, a0, MIRROR_WIDE_ARRAY_DATA_OFFSET) # a2/a3 <- vBB[vCC]
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_object: /* 0x4d */
/* File: mips/op_aput_object.S */
/*
* Store an object into an array. vBB[vCC] <- vAA.
*
*/
/* op vAA, vBB, vCC */
EXPORT_PC()
addu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rINST
JAL(MterpAputObject)
beqz v0, MterpPossibleException
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_boolean: /* 0x4e */
/* File: mips/op_aput_boolean.S */
/* File: mips/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 0
EASN(a0, a0, a1, 0) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_VREG(a2, rOBJ) # a2 <- vAA
GET_INST_OPCODE(t0) # extract opcode from rINST
sb a2, MIRROR_BOOLEAN_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_byte: /* 0x4f */
/* File: mips/op_aput_byte.S */
/* File: mips/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 0
EASN(a0, a0, a1, 0) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_VREG(a2, rOBJ) # a2 <- vAA
GET_INST_OPCODE(t0) # extract opcode from rINST
sb a2, MIRROR_BYTE_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_char: /* 0x50 */
/* File: mips/op_aput_char.S */
/* File: mips/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 1
EASN(a0, a0, a1, 1) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_VREG(a2, rOBJ) # a2 <- vAA
GET_INST_OPCODE(t0) # extract opcode from rINST
sh a2, MIRROR_CHAR_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_aput_short: /* 0x51 */
/* File: mips/op_aput_short.S */
/* File: mips/op_aput.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*
* NOTE: this assumes data offset for arrays is the same for all non-wide types.
* If this changes, specialize.
*/
/* op vAA, vBB, vCC */
FETCH_B(a2, 1, 0) # a2 <- BB
GET_OPA(rOBJ) # rOBJ <- AA
FETCH_B(a3, 1, 1) # a3 <- CC
GET_VREG(a0, a2) # a0 <- vBB (array object)
GET_VREG(a1, a3) # a1 <- vCC (requested index)
# null array object?
beqz a0, common_errNullObject # yes, bail
LOAD_base_offMirrorArray_length(a3, a0) # a3 <- arrayObj->length
.if 1
EASN(a0, a0, a1, 1) # a0 <- arrayObj + index*width
.else
addu a0, a0, a1
.endif
bgeu a1, a3, common_errArrayIndex # index >= length, bail
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_VREG(a2, rOBJ) # a2 <- vAA
GET_INST_OPCODE(t0) # extract opcode from rINST
sh a2, MIRROR_SHORT_ARRAY_DATA_OFFSET(a0) # vBB[vCC] <- a2
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget: /* 0x52 */
/* File: mips/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- referrer
move a3, rSELF # a3 <- self
JAL(artGet32InstanceFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA4(a2) # a2<- A+
PREFETCH_INST(2) # load rINST
bnez a3, MterpPossibleException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[A] <- v0
.else
SET_VREG(v0, a2) # fp[A] <- v0
.endif
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_wide: /* 0x53 */
/* File: mips/op_iget_wide.S */
/*
* 64-bit instance field get.
*
* for: iget-wide
*/
EXPORT_PC()
FETCH(a0, 1) # a0 <- field byte offset
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- referrer
move a3, rSELF # a3 <- self
JAL(artGet64InstanceFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA4(a2) # a2<- A+
PREFETCH_INST(2) # load rINST
bnez a3, MterpException # bail out
SET_VREG64(v0, v1, a2) # fp[A] <- v0/v1
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_object: /* 0x54 */
/* File: mips/op_iget_object.S */
/* File: mips/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- referrer
move a3, rSELF # a3 <- self
JAL(artGetObjInstanceFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA4(a2) # a2<- A+
PREFETCH_INST(2) # load rINST
bnez a3, MterpPossibleException # bail out
.if 1
SET_VREG_OBJECT(v0, a2) # fp[A] <- v0
.else
SET_VREG(v0, a2) # fp[A] <- v0
.endif
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_boolean: /* 0x55 */
/* File: mips/op_iget_boolean.S */
/* File: mips/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- referrer
move a3, rSELF # a3 <- self
JAL(artGetBooleanInstanceFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA4(a2) # a2<- A+
PREFETCH_INST(2) # load rINST
bnez a3, MterpPossibleException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[A] <- v0
.else
SET_VREG(v0, a2) # fp[A] <- v0
.endif
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_byte: /* 0x56 */
/* File: mips/op_iget_byte.S */
/* File: mips/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- referrer
move a3, rSELF # a3 <- self
JAL(artGetByteInstanceFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA4(a2) # a2<- A+
PREFETCH_INST(2) # load rINST
bnez a3, MterpPossibleException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[A] <- v0
.else
SET_VREG(v0, a2) # fp[A] <- v0
.endif
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_char: /* 0x57 */
/* File: mips/op_iget_char.S */
/* File: mips/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- referrer
move a3, rSELF # a3 <- self
JAL(artGetCharInstanceFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA4(a2) # a2<- A+
PREFETCH_INST(2) # load rINST
bnez a3, MterpPossibleException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[A] <- v0
.else
SET_VREG(v0, a2) # fp[A] <- v0
.endif
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_short: /* 0x58 */
/* File: mips/op_iget_short.S */
/* File: mips/op_iget.S */
/*
* General instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- referrer
move a3, rSELF # a3 <- self
JAL(artGetShortInstanceFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA4(a2) # a2<- A+
PREFETCH_INST(2) # load rINST
bnez a3, MterpPossibleException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[A] <- v0
.else
SET_VREG(v0, a2) # fp[A] <- v0
.endif
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput: /* 0x59 */
/* File: mips/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
# op vA, vB, field /* CCCC */
.extern artSet32InstanceFromMterp
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
GET_OPA4(a2) # a2 <- A+
GET_VREG(a2, a2) # a2 <- fp[A]
lw a3, OFF_FP_METHOD(rFP) # a3 <- referrer
PREFETCH_INST(2) # load rINST
JAL(artSet32InstanceFromMterp)
bnez v0, MterpPossibleException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_wide: /* 0x5a */
/* File: mips/op_iput_wide.S */
# iput-wide vA, vB, field /* CCCC */
.extern artSet64InstanceFromMterp
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
GET_OPA4(a2) # a2 <- A+
EAS2(a2, rFP, a2) # a2 <- &fp[A]
lw a3, OFF_FP_METHOD(rFP) # a3 <- referrer
PREFETCH_INST(2) # load rINST
JAL(artSet64InstanceFromMterp)
bnez v0, MterpPossibleException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_object: /* 0x5b */
/* File: mips/op_iput_object.S */
/*
* 32-bit instance field put.
*
* for: iput-object, iput-object-volatile
*/
# op vA, vB, field /* CCCC */
EXPORT_PC()
addu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rINST
move a3, rSELF
JAL(MterpIputObject)
beqz v0, MterpException
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_boolean: /* 0x5c */
/* File: mips/op_iput_boolean.S */
/* File: mips/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
# op vA, vB, field /* CCCC */
.extern artSet8InstanceFromMterp
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
GET_OPA4(a2) # a2 <- A+
GET_VREG(a2, a2) # a2 <- fp[A]
lw a3, OFF_FP_METHOD(rFP) # a3 <- referrer
PREFETCH_INST(2) # load rINST
JAL(artSet8InstanceFromMterp)
bnez v0, MterpPossibleException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_byte: /* 0x5d */
/* File: mips/op_iput_byte.S */
/* File: mips/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
# op vA, vB, field /* CCCC */
.extern artSet8InstanceFromMterp
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
GET_OPA4(a2) # a2 <- A+
GET_VREG(a2, a2) # a2 <- fp[A]
lw a3, OFF_FP_METHOD(rFP) # a3 <- referrer
PREFETCH_INST(2) # load rINST
JAL(artSet8InstanceFromMterp)
bnez v0, MterpPossibleException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_char: /* 0x5e */
/* File: mips/op_iput_char.S */
/* File: mips/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
# op vA, vB, field /* CCCC */
.extern artSet16InstanceFromMterp
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
GET_OPA4(a2) # a2 <- A+
GET_VREG(a2, a2) # a2 <- fp[A]
lw a3, OFF_FP_METHOD(rFP) # a3 <- referrer
PREFETCH_INST(2) # load rINST
JAL(artSet16InstanceFromMterp)
bnez v0, MterpPossibleException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_short: /* 0x5f */
/* File: mips/op_iput_short.S */
/* File: mips/op_iput.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
# op vA, vB, field /* CCCC */
.extern artSet16InstanceFromMterp
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
GET_OPB(a1) # a1 <- B
GET_VREG(a1, a1) # a1 <- fp[B], the object pointer
GET_OPA4(a2) # a2 <- A+
GET_VREG(a2, a2) # a2 <- fp[A]
lw a3, OFF_FP_METHOD(rFP) # a3 <- referrer
PREFETCH_INST(2) # load rINST
JAL(artSet16InstanceFromMterp)
bnez v0, MterpPossibleException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sget: /* 0x60 */
/* File: mips/op_sget.S */
/*
* General SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
# op vAA, field /* BBBB */
.extern artGet32StaticFromCode
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
lw a1, OFF_FP_METHOD(rFP) # a1 <- method
move a2, rSELF # a2 <- self
JAL(artGet32StaticFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA(a2) # a2 <- AA
PREFETCH_INST(2)
bnez a3, MterpException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[AA] <- v0
.else
SET_VREG(v0, a2) # fp[AA] <- v0
.endif
ADVANCE(2)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sget_wide: /* 0x61 */
/* File: mips/op_sget_wide.S */
/*
* 64-bit SGET handler.
*/
# sget-wide vAA, field /* BBBB */
.extern artGet64StaticFromCode
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
lw a1, OFF_FP_METHOD(rFP) # a1 <- method
move a2, rSELF # a2 <- self
JAL(artGet64StaticFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
bnez a3, MterpException
GET_OPA(a1) # a1 <- AA
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
SET_VREG64(v0, v1, a1) # vAA/vAA+1 <- v0/v1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sget_object: /* 0x62 */
/* File: mips/op_sget_object.S */
/* File: mips/op_sget.S */
/*
* General SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
# op vAA, field /* BBBB */
.extern artGetObjStaticFromCode
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
lw a1, OFF_FP_METHOD(rFP) # a1 <- method
move a2, rSELF # a2 <- self
JAL(artGetObjStaticFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA(a2) # a2 <- AA
PREFETCH_INST(2)
bnez a3, MterpException # bail out
.if 1
SET_VREG_OBJECT(v0, a2) # fp[AA] <- v0
.else
SET_VREG(v0, a2) # fp[AA] <- v0
.endif
ADVANCE(2)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sget_boolean: /* 0x63 */
/* File: mips/op_sget_boolean.S */
/* File: mips/op_sget.S */
/*
* General SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
# op vAA, field /* BBBB */
.extern artGetBooleanStaticFromCode
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
lw a1, OFF_FP_METHOD(rFP) # a1 <- method
move a2, rSELF # a2 <- self
JAL(artGetBooleanStaticFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA(a2) # a2 <- AA
PREFETCH_INST(2)
bnez a3, MterpException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[AA] <- v0
.else
SET_VREG(v0, a2) # fp[AA] <- v0
.endif
ADVANCE(2)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sget_byte: /* 0x64 */
/* File: mips/op_sget_byte.S */
/* File: mips/op_sget.S */
/*
* General SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
# op vAA, field /* BBBB */
.extern artGetByteStaticFromCode
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
lw a1, OFF_FP_METHOD(rFP) # a1 <- method
move a2, rSELF # a2 <- self
JAL(artGetByteStaticFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA(a2) # a2 <- AA
PREFETCH_INST(2)
bnez a3, MterpException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[AA] <- v0
.else
SET_VREG(v0, a2) # fp[AA] <- v0
.endif
ADVANCE(2)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sget_char: /* 0x65 */
/* File: mips/op_sget_char.S */
/* File: mips/op_sget.S */
/*
* General SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
# op vAA, field /* BBBB */
.extern artGetCharStaticFromCode
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
lw a1, OFF_FP_METHOD(rFP) # a1 <- method
move a2, rSELF # a2 <- self
JAL(artGetCharStaticFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA(a2) # a2 <- AA
PREFETCH_INST(2)
bnez a3, MterpException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[AA] <- v0
.else
SET_VREG(v0, a2) # fp[AA] <- v0
.endif
ADVANCE(2)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sget_short: /* 0x66 */
/* File: mips/op_sget_short.S */
/* File: mips/op_sget.S */
/*
* General SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
# op vAA, field /* BBBB */
.extern artGetShortStaticFromCode
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
lw a1, OFF_FP_METHOD(rFP) # a1 <- method
move a2, rSELF # a2 <- self
JAL(artGetShortStaticFromCode)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA(a2) # a2 <- AA
PREFETCH_INST(2)
bnez a3, MterpException # bail out
.if 0
SET_VREG_OBJECT(v0, a2) # fp[AA] <- v0
.else
SET_VREG(v0, a2) # fp[AA] <- v0
.endif
ADVANCE(2)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput: /* 0x67 */
/* File: mips/op_sput.S */
/*
* General SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
# op vAA, field /* BBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
GET_OPA(a3) # a3 <- AA
GET_VREG(a1, a3) # a1 <- fp[AA], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- method
move a3, rSELF # a3 <- self
PREFETCH_INST(2) # load rINST
JAL(artSet32StaticFromCode)
bnez v0, MterpException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_wide: /* 0x68 */
/* File: mips/op_sput_wide.S */
/*
* 64-bit SPUT handler.
*/
# sput-wide vAA, field /* BBBB */
.extern artSet64IndirectStaticFromMterp
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref CCCC
lw a1, OFF_FP_METHOD(rFP) # a1 <- method
GET_OPA(a2) # a2 <- AA
EAS2(a2, rFP, a2) # a2 <- &fp[AA]
move a3, rSELF # a3 <- self
PREFETCH_INST(2) # load rINST
JAL(artSet64IndirectStaticFromMterp)
bnez v0, MterpException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_object: /* 0x69 */
/* File: mips/op_sput_object.S */
/*
* General 32-bit SPUT handler.
*
* for: sput-object,
*/
/* op vAA, field@BBBB */
EXPORT_PC()
addu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rINST
move a3, rSELF
JAL(MterpSputObject)
beqz v0, MterpException
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_boolean: /* 0x6a */
/* File: mips/op_sput_boolean.S */
/* File: mips/op_sput.S */
/*
* General SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
# op vAA, field /* BBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
GET_OPA(a3) # a3 <- AA
GET_VREG(a1, a3) # a1 <- fp[AA], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- method
move a3, rSELF # a3 <- self
PREFETCH_INST(2) # load rINST
JAL(artSet8StaticFromCode)
bnez v0, MterpException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_byte: /* 0x6b */
/* File: mips/op_sput_byte.S */
/* File: mips/op_sput.S */
/*
* General SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
# op vAA, field /* BBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
GET_OPA(a3) # a3 <- AA
GET_VREG(a1, a3) # a1 <- fp[AA], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- method
move a3, rSELF # a3 <- self
PREFETCH_INST(2) # load rINST
JAL(artSet8StaticFromCode)
bnez v0, MterpException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_char: /* 0x6c */
/* File: mips/op_sput_char.S */
/* File: mips/op_sput.S */
/*
* General SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
# op vAA, field /* BBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
GET_OPA(a3) # a3 <- AA
GET_VREG(a1, a3) # a1 <- fp[AA], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- method
move a3, rSELF # a3 <- self
PREFETCH_INST(2) # load rINST
JAL(artSet16StaticFromCode)
bnez v0, MterpException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sput_short: /* 0x6d */
/* File: mips/op_sput_short.S */
/* File: mips/op_sput.S */
/*
* General SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
# op vAA, field /* BBBB */
EXPORT_PC()
FETCH(a0, 1) # a0 <- field ref BBBB
GET_OPA(a3) # a3 <- AA
GET_VREG(a1, a3) # a1 <- fp[AA], the object pointer
lw a2, OFF_FP_METHOD(rFP) # a2 <- method
move a3, rSELF # a3 <- self
PREFETCH_INST(2) # load rINST
JAL(artSet16StaticFromCode)
bnez v0, MterpException # bail out
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual: /* 0x6e */
/* File: mips/op_invoke_virtual.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeVirtual
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeVirtual)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_invoke_super: /* 0x6f */
/* File: mips/op_invoke_super.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeSuper
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeSuper)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_invoke_direct: /* 0x70 */
/* File: mips/op_invoke_direct.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeDirect
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeDirect)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_invoke_static: /* 0x71 */
/* File: mips/op_invoke_static.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeStatic
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeStatic)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_invoke_interface: /* 0x72 */
/* File: mips/op_invoke_interface.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeInterface
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeInterface)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_return_void_no_barrier: /* 0x73 */
/* File: mips/op_return_void_no_barrier.S */
lw ra, THREAD_FLAGS_OFFSET(rSELF)
move a0, rSELF
and ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
beqz ra, 1f
JAL(MterpSuspendCheck) # (self)
1:
move v0, zero
move v1, zero
b MterpReturn
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_range: /* 0x74 */
/* File: mips/op_invoke_virtual_range.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeVirtualRange
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeVirtualRange)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_invoke_super_range: /* 0x75 */
/* File: mips/op_invoke_super_range.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeSuperRange
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeSuperRange)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_invoke_direct_range: /* 0x76 */
/* File: mips/op_invoke_direct_range.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeDirectRange
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeDirectRange)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_invoke_static_range: /* 0x77 */
/* File: mips/op_invoke_static_range.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeStaticRange
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeStaticRange)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_invoke_interface_range: /* 0x78 */
/* File: mips/op_invoke_interface_range.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeInterfaceRange
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeInterfaceRange)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_unused_79: /* 0x79 */
/* File: mips/op_unused_79.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_7a: /* 0x7a */
/* File: mips/op_unused_7a.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_neg_int: /* 0x7b */
/* File: mips/op_neg_int.S */
/* File: mips/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0".
* This could be a MIPS instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(t0) # t0 <- A+
GET_VREG(a0, a3) # a0 <- vB
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
negu a0, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t1) # extract opcode from rINST
SET_VREG_GOTO(a0, t0, t1) # vAA <- result0
/* 9-10 instructions */
/* ------------------------------ */
.balign 128
.L_op_not_int: /* 0x7c */
/* File: mips/op_not_int.S */
/* File: mips/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0".
* This could be a MIPS instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(t0) # t0 <- A+
GET_VREG(a0, a3) # a0 <- vB
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
not a0, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t1) # extract opcode from rINST
SET_VREG_GOTO(a0, t0, t1) # vAA <- result0
/* 9-10 instructions */
/* ------------------------------ */
.balign 128
.L_op_neg_long: /* 0x7d */
/* File: mips/op_neg_long.S */
/* File: mips/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0/a1".
* This could be MIPS instruction or a function call.
*
* For: neg-long, not-long, neg-double,
*/
/* unop vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
EAS2(a3, rFP, a3) # a3 <- &fp[B]
LOAD64(a0, a1, a3) # a0/a1 <- vAA
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
negu v0, a0 # optional op
negu v1, a1; sltu a0, zero, v0; subu v1, v1, a0 # a0/a1 <- op, a2-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(v0, v1, rOBJ) # vAA <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_not_long: /* 0x7e */
/* File: mips/op_not_long.S */
/* File: mips/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0/a1".
* This could be MIPS instruction or a function call.
*
* For: neg-long, not-long, neg-double,
*/
/* unop vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
EAS2(a3, rFP, a3) # a3 <- &fp[B]
LOAD64(a0, a1, a3) # a0/a1 <- vAA
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
not a0, a0 # optional op
not a1, a1 # a0/a1 <- op, a2-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, rOBJ) # vAA <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_neg_float: /* 0x7f */
/* File: mips/op_neg_float.S */
/* File: mips/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0".
* This could be a MIPS instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(t0) # t0 <- A+
GET_VREG(a0, a3) # a0 <- vB
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
addu a0, a0, 0x80000000 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t1) # extract opcode from rINST
SET_VREG_GOTO(a0, t0, t1) # vAA <- result0
/* 9-10 instructions */
/* ------------------------------ */
.balign 128
.L_op_neg_double: /* 0x80 */
/* File: mips/op_neg_double.S */
/* File: mips/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0/a1".
* This could be MIPS instruction or a function call.
*
* For: neg-long, not-long, neg-double,
*/
/* unop vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
EAS2(a3, rFP, a3) # a3 <- &fp[B]
LOAD64(a0, a1, a3) # a0/a1 <- vAA
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
addu a1, a1, 0x80000000 # a0/a1 <- op, a2-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, rOBJ) # vAA <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_int_to_long: /* 0x81 */
/* File: mips/op_int_to_long.S */
/* File: mips/unopWider.S */
/*
* Generic 32bit-to-64bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op a0", where
* "result" is a 64-bit quantity in a0/a1.
*
* For: int-to-long
*/
/* unop vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, a3) # a0 <- vB
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
sra a1, a0, 31 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, rOBJ) # vA/vA+1 <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 128
.L_op_int_to_float: /* 0x82 */
/* File: mips/op_int_to_float.S */
/* File: mips/funop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0".
* This could be a MIPS instruction or a function call.
*
* for: int-to-float, float-to-int
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(rOBJ) # t0 <- A+
GET_VREG_F(fa0, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
cvt.s.w fv0, fa0
.Lop_int_to_float_set_vreg_f:
SET_VREG_F(fv0, rOBJ)
GET_INST_OPCODE(t1) # extract opcode from rINST
GOTO_OPCODE(t1) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_double: /* 0x83 */
/* File: mips/op_int_to_double.S */
/* File: mips/funopWider.S */
/*
* Generic 32bit-to-64bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op a0", where
* "result" is a 64-bit quantity in a0/a1.
*
* For: int-to-double, float-to-long, float-to-double
*/
/* unop vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG_F(fa0, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
cvt.d.w fv0, fa0
.Lop_int_to_double_set_vreg:
SET_VREG64_F(fv0, fv0f, rOBJ) # vA/vA+1 <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_long_to_int: /* 0x84 */
/* File: mips/op_long_to_int.S */
/* we ignore the high word, making this equivalent to a 32-bit reg move */
/* File: mips/op_move.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
GET_OPB(a1) # a1 <- B from 15:12
GET_OPA4(a0) # a0 <- A from 11:8
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_VREG(a2, a1) # a2 <- fp[B]
GET_INST_OPCODE(t0) # t0 <- opcode from rINST
.if 0
SET_VREG_OBJECT(a2, a0) # fp[A] <- a2
.else
SET_VREG(a2, a0) # fp[A] <- a2
.endif
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_long_to_float: /* 0x85 */
/* File: mips/op_long_to_float.S */
/* File: mips/unopNarrower.S */
/*
* Generic 64bit-to-32bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op a0/a1", where
* "result" is a 32-bit quantity in a0.
*
* For: long-to-float, double-to-int, double-to-float
* If hard floating point support is available, use fa0 as the parameter,
* except for long-to-float opcode.
* (This would work for long-to-int, but that instruction is actually
* an exact match for OP_MOVE.)
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(rOBJ) # t1 <- A+
EAS2(a3, rFP, a3) # a3 <- &fp[B]
LOAD64(rARG0, rARG1, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
JAL(__floatdisf)
.Lop_long_to_float_set_vreg_f:
SET_VREG_F(fv0, rOBJ) # vA <- result0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_long_to_double: /* 0x86 */
/* File: mips/op_long_to_double.S */
/* File: mips/funopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0/a1".
* This could be a MIPS instruction or a function call.
*
* long-to-double, double-to-long
*/
/* unop vA, vB */
GET_OPA4(rOBJ) # t1 <- A+
GET_OPB(a3) # a3 <- B
EAS2(a3, rFP, a3) # a3 <- &fp[B]
LOAD64(rARG0, rARG1, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
JAL(__floatdidf) # a0/a1 <- op, a2-a3 changed
.Lop_long_to_double_set_vreg:
SET_VREG64_F(fv0, fv0f, rOBJ) # vAA <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* 12-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_float_to_int: /* 0x87 */
/* File: mips/op_float_to_int.S */
/* File: mips/funop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0".
* This could be a MIPS instruction or a function call.
*
* for: int-to-float, float-to-int
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(rOBJ) # t0 <- A+
GET_VREG_F(fa0, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
b f2i_doconv
.Lop_float_to_int_set_vreg_f:
SET_VREG_F(fv0, rOBJ)
GET_INST_OPCODE(t1) # extract opcode from rINST
GOTO_OPCODE(t1) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_float_to_long: /* 0x88 */
/* File: mips/op_float_to_long.S */
/* File: mips/funopWider.S */
/*
* Generic 32bit-to-64bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op a0", where
* "result" is a 64-bit quantity in a0/a1.
*
* For: int-to-double, float-to-long, float-to-double
*/
/* unop vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG_F(fa0, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
b f2l_doconv
.Lop_float_to_long_set_vreg:
SET_VREG64(rRESULT0, rRESULT1, rOBJ) # vA/vA+1 <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_float_to_double: /* 0x89 */
/* File: mips/op_float_to_double.S */
/* File: mips/funopWider.S */
/*
* Generic 32bit-to-64bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op a0", where
* "result" is a 64-bit quantity in a0/a1.
*
* For: int-to-double, float-to-long, float-to-double
*/
/* unop vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG_F(fa0, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
cvt.d.s fv0, fa0
.Lop_float_to_double_set_vreg:
SET_VREG64_F(fv0, fv0f, rOBJ) # vA/vA+1 <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_double_to_int: /* 0x8a */
/* File: mips/op_double_to_int.S */
/* File: mips/unopNarrower.S */
/*
* Generic 64bit-to-32bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op a0/a1", where
* "result" is a 32-bit quantity in a0.
*
* For: long-to-float, double-to-int, double-to-float
* If hard floating point support is available, use fa0 as the parameter,
* except for long-to-float opcode.
* (This would work for long-to-int, but that instruction is actually
* an exact match for OP_MOVE.)
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(rOBJ) # t1 <- A+
EAS2(a3, rFP, a3) # a3 <- &fp[B]
LOAD64_F(fa0, fa0f, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
b d2i_doconv
.Lop_double_to_int_set_vreg_f:
SET_VREG_F(fv0, rOBJ) # vA <- result0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/*
* Convert the double in a0/a1 to an int in a0.
*
* We have to clip values to int min/max per the specification. The
* expected common case is a "reasonable" value that converts directly
* to modest integer. The EABI convert function isn't doing this for us.
*/
/* ------------------------------ */
.balign 128
.L_op_double_to_long: /* 0x8b */
/* File: mips/op_double_to_long.S */
/* File: mips/funopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0/a1".
* This could be a MIPS instruction or a function call.
*
* long-to-double, double-to-long
*/
/* unop vA, vB */
GET_OPA4(rOBJ) # t1 <- A+
GET_OPB(a3) # a3 <- B
EAS2(a3, rFP, a3) # a3 <- &fp[B]
LOAD64_F(fa0, fa0f, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
b d2l_doconv # a0/a1 <- op, a2-a3 changed
.Lop_double_to_long_set_vreg:
SET_VREG64(rRESULT0, rRESULT1, rOBJ) # vAA <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* 12-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_double_to_float: /* 0x8c */
/* File: mips/op_double_to_float.S */
/* File: mips/unopNarrower.S */
/*
* Generic 64bit-to-32bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op a0/a1", where
* "result" is a 32-bit quantity in a0.
*
* For: long-to-float, double-to-int, double-to-float
* If hard floating point support is available, use fa0 as the parameter,
* except for long-to-float opcode.
* (This would work for long-to-int, but that instruction is actually
* an exact match for OP_MOVE.)
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(rOBJ) # t1 <- A+
EAS2(a3, rFP, a3) # a3 <- &fp[B]
LOAD64_F(fa0, fa0f, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
cvt.s.d fv0, fa0
.Lop_double_to_float_set_vreg_f:
SET_VREG_F(fv0, rOBJ) # vA <- result0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_int_to_byte: /* 0x8d */
/* File: mips/op_int_to_byte.S */
/* File: mips/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0".
* This could be a MIPS instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(t0) # t0 <- A+
GET_VREG(a0, a3) # a0 <- vB
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
sll a0, a0, 24 # optional op
sra a0, a0, 24 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t1) # extract opcode from rINST
SET_VREG_GOTO(a0, t0, t1) # vAA <- result0
/* 9-10 instructions */
/* ------------------------------ */
.balign 128
.L_op_int_to_char: /* 0x8e */
/* File: mips/op_int_to_char.S */
/* File: mips/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0".
* This could be a MIPS instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(t0) # t0 <- A+
GET_VREG(a0, a3) # a0 <- vB
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
and a0, 0xffff # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t1) # extract opcode from rINST
SET_VREG_GOTO(a0, t0, t1) # vAA <- result0
/* 9-10 instructions */
/* ------------------------------ */
.balign 128
.L_op_int_to_short: /* 0x8f */
/* File: mips/op_int_to_short.S */
/* File: mips/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op a0".
* This could be a MIPS instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
GET_OPB(a3) # a3 <- B
GET_OPA4(t0) # t0 <- A+
GET_VREG(a0, a3) # a0 <- vB
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
sll a0, 16 # optional op
sra a0, 16 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t1) # extract opcode from rINST
SET_VREG_GOTO(a0, t0, t1) # vAA <- result0
/* 9-10 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_int: /* 0x90 */
/* File: mips/op_add_int.S */
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
addu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_sub_int: /* 0x91 */
/* File: mips/op_sub_int.S */
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
subu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_int: /* 0x92 */
/* File: mips/op_mul_int.S */
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
mul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_div_int: /* 0x93 */
/* File: mips/op_div_int.S */
#ifdef MIPS32REVGE6
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
div a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
#else
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
div zero, a0, a1 # optional op
mflo a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
#endif
/* ------------------------------ */
.balign 128
.L_op_rem_int: /* 0x94 */
/* File: mips/op_rem_int.S */
#ifdef MIPS32REVGE6
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
mod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
#else
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
div zero, a0, a1 # optional op
mfhi a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
#endif
/* ------------------------------ */
.balign 128
.L_op_and_int: /* 0x95 */
/* File: mips/op_and_int.S */
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_int: /* 0x96 */
/* File: mips/op_or_int.S */
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_int: /* 0x97 */
/* File: mips/op_xor_int.S */
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_int: /* 0x98 */
/* File: mips/op_shl_int.S */
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
sll a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_shr_int: /* 0x99 */
/* File: mips/op_shr_int.S */
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
sra a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_ushr_int: /* 0x9a */
/* File: mips/op_ushr_int.S */
/* File: mips/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0 op a1".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the CPU handles it
* correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG(a1, a3) # a1 <- vCC
GET_VREG(a0, a2) # a0 <- vBB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
srl a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 11-14 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_long: /* 0x9b */
/* File: mips/op_add_long.S */
/*
* The compiler generates the following sequence for
* [v1 v0] = [a1 a0] + [a3 a2];
* addu v0,a2,a0
* addu a1,a3,a1
* sltu v1,v0,a2
* addu v1,v1,a1
*/
/* File: mips/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64(a0, a1, a2) # a0/a1 <- vBB/vBB+1
LOAD64(a2, a3, t1) # a2/a3 <- vCC/vCC+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
addu v0, a2, a0 # optional op
addu a1, a3, a1; sltu v1, v0, a2; addu v1, v1, a1 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64_GOTO(v0, v1, rOBJ, t0) # vAA/vAA+1 <- v0/v1
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_sub_long: /* 0x9c */
/* File: mips/op_sub_long.S */
/*
* For little endian the code sequence looks as follows:
* subu v0,a0,a2
* subu v1,a1,a3
* sltu a0,a0,v0
* subu v1,v1,a0
*/
/* File: mips/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64(a0, a1, a2) # a0/a1 <- vBB/vBB+1
LOAD64(a2, a3, t1) # a2/a3 <- vCC/vCC+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
subu v0, a0, a2 # optional op
subu v1, a1, a3; sltu a0, a0, v0; subu v1, v1, a0 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64_GOTO(v0, v1, rOBJ, t0) # vAA/vAA+1 <- v0/v1
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_long: /* 0x9d */
/* File: mips/op_mul_long.S */
/*
* Signed 64-bit integer multiply.
* a1 a0
* x a3 a2
* -------------
* a2a1 a2a0
* a3a0
* a3a1 (<= unused)
* ---------------
* v1 v0
*/
/* mul-long vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
and t0, a0, 255 # a2 <- BB
srl t1, a0, 8 # a3 <- CC
EAS2(t0, rFP, t0) # t0 <- &fp[BB]
LOAD64(a0, a1, t0) # a0/a1 <- vBB/vBB+1
EAS2(t1, rFP, t1) # t0 <- &fp[CC]
LOAD64(a2, a3, t1) # a2/a3 <- vCC/vCC+1
mul v1, a3, a0 # v1= a3a0
#ifdef MIPS32REVGE6
mulu v0, a2, a0 # v0= a2a0
muhu t1, a2, a0
#else
multu a2, a0
mfhi t1
mflo v0 # v0= a2a0
#endif
mul t0, a2, a1 # t0= a2a1
addu v1, v1, t1 # v1+= hi(a2a0)
addu v1, v1, t0 # v1= a3a0 + a2a1;
GET_OPA(a0) # a0 <- AA
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
b .Lop_mul_long_finish
/* ------------------------------ */
.balign 128
.L_op_div_long: /* 0x9e */
/* File: mips/op_div_long.S */
/* File: mips/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64(a0, a1, a2) # a0/a1 <- vBB/vBB+1
LOAD64(a2, a3, t1) # a2/a3 <- vCC/vCC+1
.if 1
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
JAL(__divdi3) # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64_GOTO(v0, v1, rOBJ, t0) # vAA/vAA+1 <- v0/v1
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_rem_long: /* 0x9f */
/* File: mips/op_rem_long.S */
/* File: mips/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64(a0, a1, a2) # a0/a1 <- vBB/vBB+1
LOAD64(a2, a3, t1) # a2/a3 <- vCC/vCC+1
.if 1
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
JAL(__moddi3) # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64_GOTO(v0, v1, rOBJ, t0) # vAA/vAA+1 <- v0/v1
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_and_long: /* 0xa0 */
/* File: mips/op_and_long.S */
/* File: mips/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64(a0, a1, a2) # a0/a1 <- vBB/vBB+1
LOAD64(a2, a3, t1) # a2/a3 <- vCC/vCC+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
and a0, a0, a2 # optional op
and a1, a1, a3 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64_GOTO(a0, a1, rOBJ, t0) # vAA/vAA+1 <- a0/a1
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_long: /* 0xa1 */
/* File: mips/op_or_long.S */
/* File: mips/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64(a0, a1, a2) # a0/a1 <- vBB/vBB+1
LOAD64(a2, a3, t1) # a2/a3 <- vCC/vCC+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
or a0, a0, a2 # optional op
or a1, a1, a3 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64_GOTO(a0, a1, rOBJ, t0) # vAA/vAA+1 <- a0/a1
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_long: /* 0xa2 */
/* File: mips/op_xor_long.S */
/* File: mips/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64(a0, a1, a2) # a0/a1 <- vBB/vBB+1
LOAD64(a2, a3, t1) # a2/a3 <- vCC/vCC+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
xor a0, a0, a2 # optional op
xor a1, a1, a3 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64_GOTO(a0, a1, rOBJ, t0) # vAA/vAA+1 <- a0/a1
/* 14-17 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_long: /* 0xa3 */
/* File: mips/op_shl_long.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance.
*/
/* shl-long vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(t2) # t2 <- AA
and a3, a0, 255 # a3 <- BB
srl a0, a0, 8 # a0 <- CC
EAS2(a3, rFP, a3) # a3 <- &fp[BB]
GET_VREG(a2, a0) # a2 <- vCC
LOAD64(a0, a1, a3) # a0/a1 <- vBB/vBB+1
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
andi v1, a2, 0x20 # shift< shift & 0x20
sll v0, a0, a2 # rlo<- alo << (shift&31)
bnez v1, .Lop_shl_long_finish
not v1, a2 # rhi<- 31-shift (shift is 5b)
srl a0, 1
srl a0, v1 # alo<- alo >> (32-(shift&31))
sll v1, a1, a2 # rhi<- ahi << (shift&31)
or v1, a0 # rhi<- rhi | alo
SET_VREG64_GOTO(v0, v1, t2, t0) # vAA/vAA+1 <- a0/a1
/* ------------------------------ */
.balign 128
.L_op_shr_long: /* 0xa4 */
/* File: mips/op_shr_long.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance.
*/
/* shr-long vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(t3) # t3 <- AA
and a3, a0, 255 # a3 <- BB
srl a0, a0, 8 # a0 <- CC
EAS2(a3, rFP, a3) # a3 <- &fp[BB]
GET_VREG(a2, a0) # a2 <- vCC
LOAD64(a0, a1, a3) # a0/a1 <- vBB/vBB+1
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
andi v0, a2, 0x20 # shift & 0x20
sra v1, a1, a2 # rhi<- ahi >> (shift&31)
bnez v0, .Lop_shr_long_finish
srl v0, a0, a2 # rlo<- alo >> (shift&31)
not a0, a2 # alo<- 31-shift (shift is 5b)
sll a1, 1
sll a1, a0 # ahi<- ahi << (32-(shift&31))
or v0, a1 # rlo<- rlo | ahi
SET_VREG64_GOTO(v0, v1, t3, t0) # vAA/VAA+1 <- v0/v0
/* ------------------------------ */
.balign 128
.L_op_ushr_long: /* 0xa5 */
/* File: mips/op_ushr_long.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance.
*/
/* ushr-long vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # rOBJ <- AA
and a3, a0, 255 # a3 <- BB
srl a0, a0, 8 # a0 <- CC
EAS2(a3, rFP, a3) # a3 <- &fp[BB]
GET_VREG(a2, a0) # a2 <- vCC
LOAD64(a0, a1, a3) # a0/a1 <- vBB/vBB+1
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
andi v0, a2, 0x20 # shift & 0x20
srl v1, a1, a2 # rhi<- ahi >> (shift&31)
bnez v0, .Lop_ushr_long_finish
srl v0, a0, a2 # rlo<- alo >> (shift&31)
not a0, a2 # alo<- 31-n (shift is 5b)
sll a1, 1
sll a1, a0 # ahi<- ahi << (32-(shift&31))
or v0, a1 # rlo<- rlo | ahi
SET_VREG64_GOTO(v0, v1, rOBJ, t0) # vAA/vAA+1 <- v0/v1
/* ------------------------------ */
.balign 128
.L_op_add_float: /* 0xa6 */
/* File: mips/op_add_float.S */
/* File: mips/fbinop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp, rem-fp
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG_F(fa1, a3) # a1 <- vCC
GET_VREG_F(fa0, a2) # a0 <- vBB
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
add.s fv0, fa0, fa1 # f0 = result
SET_VREG_F(fv0, rOBJ) # vAA <- fv0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_float: /* 0xa7 */
/* File: mips/op_sub_float.S */
/* File: mips/fbinop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp, rem-fp
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG_F(fa1, a3) # a1 <- vCC
GET_VREG_F(fa0, a2) # a0 <- vBB
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
sub.s fv0, fa0, fa1 # f0 = result
SET_VREG_F(fv0, rOBJ) # vAA <- fv0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_float: /* 0xa8 */
/* File: mips/op_mul_float.S */
/* File: mips/fbinop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp, rem-fp
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG_F(fa1, a3) # a1 <- vCC
GET_VREG_F(fa0, a2) # a0 <- vBB
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
mul.s fv0, fa0, fa1 # f0 = result
SET_VREG_F(fv0, rOBJ) # vAA <- fv0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_float: /* 0xa9 */
/* File: mips/op_div_float.S */
/* File: mips/fbinop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp, rem-fp
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG_F(fa1, a3) # a1 <- vCC
GET_VREG_F(fa0, a2) # a0 <- vBB
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
div.s fv0, fa0, fa1 # f0 = result
SET_VREG_F(fv0, rOBJ) # vAA <- fv0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_float: /* 0xaa */
/* File: mips/op_rem_float.S */
/* File: mips/fbinop.S */
/*
* Generic 32-bit binary float operation.
*
* For: add-fp, sub-fp, mul-fp, div-fp, rem-fp
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
srl a3, a0, 8 # a3 <- CC
and a2, a0, 255 # a2 <- BB
GET_VREG_F(fa1, a3) # a1 <- vCC
GET_VREG_F(fa0, a2) # a0 <- vBB
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
JAL(fmodf) # f0 = result
SET_VREG_F(fv0, rOBJ) # vAA <- fv0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_double: /* 0xab */
/* File: mips/op_add_double.S */
/* File: mips/fbinopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* for: add-double, sub-double, mul-double, div-double,
* rem-double
*
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64_F(fa0, fa0f, a2)
LOAD64_F(fa1, fa1f, t1)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
add.d fv0, fa0, fa1
SET_VREG64_F(fv0, fv0f, rOBJ)
b .Lop_add_double_finish
/* ------------------------------ */
.balign 128
.L_op_sub_double: /* 0xac */
/* File: mips/op_sub_double.S */
/* File: mips/fbinopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* for: add-double, sub-double, mul-double, div-double,
* rem-double
*
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64_F(fa0, fa0f, a2)
LOAD64_F(fa1, fa1f, t1)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
sub.d fv0, fa0, fa1
SET_VREG64_F(fv0, fv0f, rOBJ)
b .Lop_sub_double_finish
/* ------------------------------ */
.balign 128
.L_op_mul_double: /* 0xad */
/* File: mips/op_mul_double.S */
/* File: mips/fbinopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* for: add-double, sub-double, mul-double, div-double,
* rem-double
*
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64_F(fa0, fa0f, a2)
LOAD64_F(fa1, fa1f, t1)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
mul.d fv0, fa0, fa1
SET_VREG64_F(fv0, fv0f, rOBJ)
b .Lop_mul_double_finish
/* ------------------------------ */
.balign 128
.L_op_div_double: /* 0xae */
/* File: mips/op_div_double.S */
/* File: mips/fbinopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* for: add-double, sub-double, mul-double, div-double,
* rem-double
*
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64_F(fa0, fa0f, a2)
LOAD64_F(fa1, fa1f, t1)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
div.d fv0, fa0, fa1
SET_VREG64_F(fv0, fv0f, rOBJ)
b .Lop_div_double_finish
/* ------------------------------ */
.balign 128
.L_op_rem_double: /* 0xaf */
/* File: mips/op_rem_double.S */
/* File: mips/fbinopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* for: add-double, sub-double, mul-double, div-double,
* rem-double
*
*/
/* binop vAA, vBB, vCC */
FETCH(a0, 1) # a0 <- CCBB
GET_OPA(rOBJ) # s5 <- AA
and a2, a0, 255 # a2 <- BB
srl a3, a0, 8 # a3 <- CC
EAS2(a2, rFP, a2) # a2 <- &fp[BB]
EAS2(t1, rFP, a3) # a3 <- &fp[CC]
LOAD64_F(fa0, fa0f, a2)
LOAD64_F(fa1, fa1f, t1)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
JAL(fmod)
SET_VREG64_F(fv0, fv0f, rOBJ)
b .Lop_rem_double_finish
/* ------------------------------ */
.balign 128
.L_op_add_int_2addr: /* 0xb0 */
/* File: mips/op_add_int_2addr.S */
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
addu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_sub_int_2addr: /* 0xb1 */
/* File: mips/op_sub_int_2addr.S */
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
subu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_int_2addr: /* 0xb2 */
/* File: mips/op_mul_int_2addr.S */
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
mul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_div_int_2addr: /* 0xb3 */
/* File: mips/op_div_int_2addr.S */
#ifdef MIPS32REVGE6
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
div a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
#else
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
div zero, a0, a1 # optional op
mflo a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
#endif
/* ------------------------------ */
.balign 128
.L_op_rem_int_2addr: /* 0xb4 */
/* File: mips/op_rem_int_2addr.S */
#ifdef MIPS32REVGE6
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
mod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
#else
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
div zero, a0, a1 # optional op
mfhi a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
#endif
/* ------------------------------ */
.balign 128
.L_op_and_int_2addr: /* 0xb5 */
/* File: mips/op_and_int_2addr.S */
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_int_2addr: /* 0xb6 */
/* File: mips/op_or_int_2addr.S */
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_int_2addr: /* 0xb7 */
/* File: mips/op_xor_int_2addr.S */
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_int_2addr: /* 0xb8 */
/* File: mips/op_shl_int_2addr.S */
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
sll a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_shr_int_2addr: /* 0xb9 */
/* File: mips/op_shr_int_2addr.S */
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
sra a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_ushr_int_2addr: /* 0xba */
/* File: mips/op_ushr_int_2addr.S */
/* File: mips/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a0, rOBJ) # a0 <- vA
GET_VREG(a1, a3) # a1 <- vB
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
srl a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_long_2addr: /* 0xbb */
/* File: mips/op_add_long_2addr.S */
/*
* See op_add_long.S for details
*/
/* File: mips/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr
* rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64(a2, a3, a1) # a2/a3 <- vBB/vBB+1
LOAD64(a0, a1, t0) # a0/a1 <- vAA/vAA+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
addu v0, a2, a0 # optional op
addu a1, a3, a1; sltu v1, v0, a2; addu v1, v1, a1 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(v0, v1, rOBJ) # vAA/vAA+1 <- v0/v1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_sub_long_2addr: /* 0xbc */
/* File: mips/op_sub_long_2addr.S */
/*
* See op_sub_long.S for more details
*/
/* File: mips/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr
* rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64(a2, a3, a1) # a2/a3 <- vBB/vBB+1
LOAD64(a0, a1, t0) # a0/a1 <- vAA/vAA+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
subu v0, a0, a2 # optional op
subu v1, a1, a3; sltu a0, a0, v0; subu v1, v1, a0 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(v0, v1, rOBJ) # vAA/vAA+1 <- v0/v1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_long_2addr: /* 0xbd */
/* File: mips/op_mul_long_2addr.S */
/*
* See op_mul_long.S for more details
*/
/* mul-long/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64(a0, a1, t0) # vAA.low / high
GET_OPB(t1) # t1 <- B
EAS2(t1, rFP, t1) # t1 <- &fp[B]
LOAD64(a2, a3, t1) # vBB.low / high
mul v1, a3, a0 # v1= a3a0
#ifdef MIPS32REVGE6
mulu v0, a2, a0 # v0= a2a0
muhu t1, a2, a0
#else
multu a2, a0
mfhi t1
mflo v0 # v0= a2a0
#endif
mul t2, a2, a1 # t2= a2a1
addu v1, v1, t1 # v1= a3a0 + hi(a2a0)
addu v1, v1, t2 # v1= v1 + a2a1;
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_INST_OPCODE(t1) # extract opcode from rINST
# vAA <- v0 (low)
SET_VREG64(v0, v1, rOBJ) # vAA+1 <- v1 (high)
GOTO_OPCODE(t1) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_long_2addr: /* 0xbe */
/* File: mips/op_div_long_2addr.S */
/* File: mips/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr
* rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64(a2, a3, a1) # a2/a3 <- vBB/vBB+1
LOAD64(a0, a1, t0) # a0/a1 <- vAA/vAA+1
.if 1
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
JAL(__divdi3) # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(v0, v1, rOBJ) # vAA/vAA+1 <- v0/v1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_rem_long_2addr: /* 0xbf */
/* File: mips/op_rem_long_2addr.S */
/* File: mips/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr
* rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64(a2, a3, a1) # a2/a3 <- vBB/vBB+1
LOAD64(a0, a1, t0) # a0/a1 <- vAA/vAA+1
.if 1
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
# optional op
JAL(__moddi3) # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(v0, v1, rOBJ) # vAA/vAA+1 <- v0/v1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_and_long_2addr: /* 0xc0 */
/* File: mips/op_and_long_2addr.S */
/* File: mips/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr
* rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64(a2, a3, a1) # a2/a3 <- vBB/vBB+1
LOAD64(a0, a1, t0) # a0/a1 <- vAA/vAA+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
and a0, a0, a2 # optional op
and a1, a1, a3 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, rOBJ) # vAA/vAA+1 <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_long_2addr: /* 0xc1 */
/* File: mips/op_or_long_2addr.S */
/* File: mips/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr
* rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64(a2, a3, a1) # a2/a3 <- vBB/vBB+1
LOAD64(a0, a1, t0) # a0/a1 <- vAA/vAA+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
or a0, a0, a2 # optional op
or a1, a1, a3 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, rOBJ) # vAA/vAA+1 <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_long_2addr: /* 0xc2 */
/* File: mips/op_xor_long_2addr.S */
/* File: mips/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be a MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr
* rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64(a2, a3, a1) # a2/a3 <- vBB/vBB+1
LOAD64(a0, a1, t0) # a0/a1 <- vAA/vAA+1
.if 0
or t0, a2, a3 # second arg (a2-a3) is zero?
beqz t0, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
xor a0, a0, a2 # optional op
xor a1, a1, a3 # result <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, rOBJ) # vAA/vAA+1 <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_long_2addr: /* 0xc3 */
/* File: mips/op_shl_long_2addr.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* shl-long/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a2, a3) # a2 <- vB
EAS2(t2, rFP, rOBJ) # t2 <- &fp[A]
LOAD64(a0, a1, t2) # a0/a1 <- vAA/vAA+1
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
andi v1, a2, 0x20 # shift< shift & 0x20
sll v0, a0, a2 # rlo<- alo << (shift&31)
bnez v1, .Lop_shl_long_2addr_finish
not v1, a2 # rhi<- 31-shift (shift is 5b)
srl a0, 1
srl a0, v1 # alo<- alo >> (32-(shift&31))
sll v1, a1, a2 # rhi<- ahi << (shift&31)
or v1, a0 # rhi<- rhi | alo
SET_VREG64_GOTO(v0, v1, rOBJ, t0) # vAA/vAA+1 <- a0/a1
/* ------------------------------ */
.balign 128
.L_op_shr_long_2addr: /* 0xc4 */
/* File: mips/op_shr_long_2addr.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* shr-long/2addr vA, vB */
GET_OPA4(t2) # t2 <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a2, a3) # a2 <- vB
EAS2(t0, rFP, t2) # t0 <- &fp[A]
LOAD64(a0, a1, t0) # a0/a1 <- vAA/vAA+1
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
andi v0, a2, 0x20 # shift & 0x20
sra v1, a1, a2 # rhi<- ahi >> (shift&31)
bnez v0, .Lop_shr_long_2addr_finish
srl v0, a0, a2 # rlo<- alo >> (shift&31)
not a0, a2 # alo<- 31-shift (shift is 5b)
sll a1, 1
sll a1, a0 # ahi<- ahi << (32-(shift&31))
or v0, a1 # rlo<- rlo | ahi
SET_VREG64_GOTO(v0, v1, t2, t0) # vAA/vAA+1 <- a0/a1
/* ------------------------------ */
.balign 128
.L_op_ushr_long_2addr: /* 0xc5 */
/* File: mips/op_ushr_long_2addr.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* ushr-long/2addr vA, vB */
GET_OPA4(t3) # t3 <- A+
GET_OPB(a3) # a3 <- B
GET_VREG(a2, a3) # a2 <- vB
EAS2(t0, rFP, t3) # t0 <- &fp[A]
LOAD64(a0, a1, t0) # a0/a1 <- vAA/vAA+1
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
andi v0, a2, 0x20 # shift & 0x20
srl v1, a1, a2 # rhi<- ahi >> (shift&31)
bnez v0, .Lop_ushr_long_2addr_finish
srl v0, a0, a2 # rlo<- alo >> (shift&31)
not a0, a2 # alo<- 31-n (shift is 5b)
sll a1, 1
sll a1, a0 # ahi<- ahi << (32-(shift&31))
or v0, a1 # rlo<- rlo | ahi
SET_VREG64_GOTO(v0, v1, t3, t0) # vAA/vAA+1 <- a0/a1
/* ------------------------------ */
.balign 128
.L_op_add_float_2addr: /* 0xc6 */
/* File: mips/op_add_float_2addr.S */
/* File: mips/fbinop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr"
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr,
* div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # t1 <- A+
GET_OPB(a3) # a3 <- B
GET_VREG_F(fa0, rOBJ)
GET_VREG_F(fa1, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
add.s fv0, fa0, fa1
SET_VREG_F(fv0, rOBJ) # vAA <- result
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_float_2addr: /* 0xc7 */
/* File: mips/op_sub_float_2addr.S */
/* File: mips/fbinop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr"
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr,
* div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # t1 <- A+
GET_OPB(a3) # a3 <- B
GET_VREG_F(fa0, rOBJ)
GET_VREG_F(fa1, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
sub.s fv0, fa0, fa1
SET_VREG_F(fv0, rOBJ) # vAA <- result
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_float_2addr: /* 0xc8 */
/* File: mips/op_mul_float_2addr.S */
/* File: mips/fbinop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr"
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr,
* div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # t1 <- A+
GET_OPB(a3) # a3 <- B
GET_VREG_F(fa0, rOBJ)
GET_VREG_F(fa1, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
mul.s fv0, fa0, fa1
SET_VREG_F(fv0, rOBJ) # vAA <- result
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_float_2addr: /* 0xc9 */
/* File: mips/op_div_float_2addr.S */
/* File: mips/fbinop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr"
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr,
* div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # t1 <- A+
GET_OPB(a3) # a3 <- B
GET_VREG_F(fa0, rOBJ)
GET_VREG_F(fa1, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
div.s fv0, fa0, fa1
SET_VREG_F(fv0, rOBJ) # vAA <- result
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_float_2addr: /* 0xca */
/* File: mips/op_rem_float_2addr.S */
/* File: mips/fbinop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr"
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call.
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr,
* div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # t1 <- A+
GET_OPB(a3) # a3 <- B
GET_VREG_F(fa0, rOBJ)
GET_VREG_F(fa1, a3)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
JAL(fmodf)
SET_VREG_F(fv0, rOBJ) # vAA <- result
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_double_2addr: /* 0xcb */
/* File: mips/op_add_double_2addr.S */
/* File: mips/fbinopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr, rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64_F(fa0, fa0f, t0)
LOAD64_F(fa1, fa1f, a1)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
add.d fv0, fa0, fa1
SET_VREG64_F(fv0, fv0f, rOBJ)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_sub_double_2addr: /* 0xcc */
/* File: mips/op_sub_double_2addr.S */
/* File: mips/fbinopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr, rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64_F(fa0, fa0f, t0)
LOAD64_F(fa1, fa1f, a1)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
sub.d fv0, fa0, fa1
SET_VREG64_F(fv0, fv0f, rOBJ)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_mul_double_2addr: /* 0xcd */
/* File: mips/op_mul_double_2addr.S */
/* File: mips/fbinopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr, rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64_F(fa0, fa0f, t0)
LOAD64_F(fa1, fa1f, a1)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
mul.d fv0, fa0, fa1
SET_VREG64_F(fv0, fv0f, rOBJ)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_div_double_2addr: /* 0xce */
/* File: mips/op_div_double_2addr.S */
/* File: mips/fbinopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr, rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64_F(fa0, fa0f, t0)
LOAD64_F(fa1, fa1f, a1)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
div.d fv0, fa0, fa1
SET_VREG64_F(fv0, fv0f, rOBJ)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_rem_double_2addr: /* 0xcf */
/* File: mips/op_rem_double_2addr.S */
/* File: mips/fbinopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0-a1 op a2-a3".
* This could be an MIPS instruction or a function call.
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr, rem-double/2addr
*/
/* binop/2addr vA, vB */
GET_OPA4(rOBJ) # rOBJ <- A+
GET_OPB(a1) # a1 <- B
EAS2(a1, rFP, a1) # a1 <- &fp[B]
EAS2(t0, rFP, rOBJ) # t0 <- &fp[A]
LOAD64_F(fa0, fa0f, t0)
LOAD64_F(fa1, fa1f, a1)
FETCH_ADVANCE_INST(1) # advance rPC, load rINST
JAL(fmod)
SET_VREG64_F(fv0, fv0f, rOBJ)
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_add_int_lit16: /* 0xd0 */
/* File: mips/op_add_int_lit16.S */
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 0
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
addu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_rsub_int: /* 0xd1 */
/* File: mips/op_rsub_int.S */
/* this op is "rsub-int", but can be thought of as "rsub-int/lit16" */
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 0
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
subu a0, a1, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_int_lit16: /* 0xd2 */
/* File: mips/op_mul_int_lit16.S */
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 0
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
mul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_div_int_lit16: /* 0xd3 */
/* File: mips/op_div_int_lit16.S */
#ifdef MIPS32REVGE6
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 1
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
div a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
#else
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 1
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
div zero, a0, a1 # optional op
mflo a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
#endif
/* ------------------------------ */
.balign 128
.L_op_rem_int_lit16: /* 0xd4 */
/* File: mips/op_rem_int_lit16.S */
#ifdef MIPS32REVGE6
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 1
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
mod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
#else
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 1
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
div zero, a0, a1 # optional op
mfhi a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
#endif
/* ------------------------------ */
.balign 128
.L_op_and_int_lit16: /* 0xd5 */
/* File: mips/op_and_int_lit16.S */
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 0
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_int_lit16: /* 0xd6 */
/* File: mips/op_or_int_lit16.S */
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 0
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_int_lit16: /* 0xd7 */
/* File: mips/op_xor_int_lit16.S */
/* File: mips/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
# binop/lit16 vA, vB, /* +CCCC */
FETCH_S(a1, 1) # a1 <- ssssCCCC (sign-extended)
GET_OPB(a2) # a2 <- B
GET_OPA(rOBJ) # rOBJ <- A+
GET_VREG(a0, a2) # a0 <- vB
and rOBJ, rOBJ, 15
.if 0
# cmp a1, 0; is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-13 instructions */
/* ------------------------------ */
.balign 128
.L_op_add_int_lit8: /* 0xd8 */
/* File: mips/op_add_int_lit8.S */
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
addu a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_rsub_int_lit8: /* 0xd9 */
/* File: mips/op_rsub_int_lit8.S */
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
subu a0, a1, a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_mul_int_lit8: /* 0xda */
/* File: mips/op_mul_int_lit8.S */
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
mul a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_div_int_lit8: /* 0xdb */
/* File: mips/op_div_int_lit8.S */
#ifdef MIPS32REVGE6
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
div a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
#else
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
div zero, a0, a1 # optional op
mflo a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
#endif
/* ------------------------------ */
.balign 128
.L_op_rem_int_lit8: /* 0xdc */
/* File: mips/op_rem_int_lit8.S */
#ifdef MIPS32REVGE6
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
mod a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
#else
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 1
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
div zero, a0, a1 # optional op
mfhi a0 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
#endif
/* ------------------------------ */
.balign 128
.L_op_and_int_lit8: /* 0xdd */
/* File: mips/op_and_int_lit8.S */
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
and a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_or_int_lit8: /* 0xde */
/* File: mips/op_or_int_lit8.S */
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
or a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_xor_int_lit8: /* 0xdf */
/* File: mips/op_xor_int_lit8.S */
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
xor a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_shl_int_lit8: /* 0xe0 */
/* File: mips/op_shl_int_lit8.S */
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
sll a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_shr_int_lit8: /* 0xe1 */
/* File: mips/op_shr_int_lit8.S */
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
sra a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_ushr_int_lit8: /* 0xe2 */
/* File: mips/op_ushr_int_lit8.S */
/* File: mips/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = a0 op a1".
* This could be an MIPS instruction or a function call. (If the result
* comes back in a register other than a0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (a1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
# binop/lit8 vAA, vBB, /* +CC */
FETCH_S(a3, 1) # a3 <- ssssCCBB (sign-extended for CC)
GET_OPA(rOBJ) # rOBJ <- AA
and a2, a3, 255 # a2 <- BB
GET_VREG(a0, a2) # a0 <- vBB
sra a1, a3, 8 # a1 <- ssssssCC (sign extended)
.if 0
# is second operand zero?
beqz a1, common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
# optional op
srl a0, a0, a1 # a0 <- op, a0-a3 changed
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, rOBJ, t0) # vAA <- a0
/* 10-12 instructions */
/* ------------------------------ */
.balign 128
.L_op_iget_quick: /* 0xe3 */
/* File: mips/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- object we're operating on
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
# check object for null
beqz a3, common_errNullObject # object was null
addu t0, a3, a1
lw a0, 0(t0) # a0 <- obj.field (8/16/32 bits)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, a2, t0) # fp[A] <- a0
/* ------------------------------ */
.balign 128
.L_op_iget_wide_quick: /* 0xe4 */
/* File: mips/op_iget_wide_quick.S */
# iget-wide-quick vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- object we're operating on
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
# check object for null
beqz a3, common_errNullObject # object was null
addu t0, a3, a1 # t0 <- a3 + a1
LOAD64(a0, a1, t0) # a0 <- obj.field (64 bits, aligned)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(a0, a1, a2) # fp[A] <- a0/a1
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_object_quick: /* 0xe5 */
/* File: mips/op_iget_object_quick.S */
/* For: iget-object-quick */
/* op vA, vB, offset@CCCC */
GET_OPB(a2) # a2 <- B
FETCH(a1, 1) # a1 <- field byte offset
EXPORT_PC()
GET_VREG(a0, a2) # a0 <- object we're operating on
JAL(artIGetObjectFromMterp) # v0 <- GetObj(obj, offset)
lw a3, THREAD_EXCEPTION_OFFSET(rSELF)
GET_OPA4(a2) # a2<- A+
PREFETCH_INST(2) # load rINST
bnez a3, MterpPossibleException # bail out
SET_VREG_OBJECT(v0, a2) # fp[A] <- v0
ADVANCE(2) # advance rPC
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_quick: /* 0xe6 */
/* File: mips/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- fp[B], the object pointer
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
beqz a3, common_errNullObject # object was null
GET_VREG(a0, a2) # a0 <- fp[A]
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
addu t0, a3, a1
sw a0, 0(t0) # obj.field (8/16/32 bits) <- a0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_wide_quick: /* 0xe7 */
/* File: mips/op_iput_wide_quick.S */
# iput-wide-quick vA, vB, offset /* CCCC */
GET_OPA4(a0) # a0 <- A(+)
GET_OPB(a1) # a1 <- B
GET_VREG(a2, a1) # a2 <- fp[B], the object pointer
# check object for null
beqz a2, common_errNullObject # object was null
EAS2(a3, rFP, a0) # a3 <- &fp[A]
LOAD64(a0, a1, a3) # a0/a1 <- fp[A]
FETCH(a3, 1) # a3 <- field byte offset
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
addu a2, a2, a3 # obj.field (64 bits, aligned) <- a0/a1
STORE64(a0, a1, a2) # obj.field (64 bits, aligned) <- a0/a1
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_object_quick: /* 0xe8 */
/* File: mips/op_iput_object_quick.S */
/* For: iput-object-quick */
# op vA, vB, offset /* CCCC */
EXPORT_PC()
addu a0, rFP, OFF_FP_SHADOWFRAME
move a1, rPC
move a2, rINST
JAL(MterpIputObjectQuick)
beqz v0, MterpException
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_quick: /* 0xe9 */
/* File: mips/op_invoke_virtual_quick.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeVirtualQuick
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeVirtualQuick)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_invoke_virtual_range_quick: /* 0xea */
/* File: mips/op_invoke_virtual_range_quick.S */
/* File: mips/invoke.S */
/*
* Generic invoke handler wrapper.
*/
# op vB, {vD, vE, vF, vG, vA}, class /* CCCC */
# op {vCCCC..v(CCCC+AA-1)}, meth /* BBBB */
.extern MterpInvokeVirtualQuickRange
EXPORT_PC()
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rPC
move a3, rINST
JAL(MterpInvokeVirtualQuickRange)
beqz v0, MterpException
FETCH_ADVANCE_INST(3)
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* ------------------------------ */
.balign 128
.L_op_iput_boolean_quick: /* 0xeb */
/* File: mips/op_iput_boolean_quick.S */
/* File: mips/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- fp[B], the object pointer
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
beqz a3, common_errNullObject # object was null
GET_VREG(a0, a2) # a0 <- fp[A]
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
addu t0, a3, a1
sb a0, 0(t0) # obj.field (8/16/32 bits) <- a0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_byte_quick: /* 0xec */
/* File: mips/op_iput_byte_quick.S */
/* File: mips/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- fp[B], the object pointer
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
beqz a3, common_errNullObject # object was null
GET_VREG(a0, a2) # a0 <- fp[A]
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
addu t0, a3, a1
sb a0, 0(t0) # obj.field (8/16/32 bits) <- a0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_char_quick: /* 0xed */
/* File: mips/op_iput_char_quick.S */
/* File: mips/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- fp[B], the object pointer
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
beqz a3, common_errNullObject # object was null
GET_VREG(a0, a2) # a0 <- fp[A]
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
addu t0, a3, a1
sh a0, 0(t0) # obj.field (8/16/32 bits) <- a0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iput_short_quick: /* 0xee */
/* File: mips/op_iput_short_quick.S */
/* File: mips/op_iput_quick.S */
/* For: iput-quick, iput-object-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- fp[B], the object pointer
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
beqz a3, common_errNullObject # object was null
GET_VREG(a0, a2) # a0 <- fp[A]
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
addu t0, a3, a1
sh a0, 0(t0) # obj.field (8/16/32 bits) <- a0
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* ------------------------------ */
.balign 128
.L_op_iget_boolean_quick: /* 0xef */
/* File: mips/op_iget_boolean_quick.S */
/* File: mips/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- object we're operating on
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
# check object for null
beqz a3, common_errNullObject # object was null
addu t0, a3, a1
lbu a0, 0(t0) # a0 <- obj.field (8/16/32 bits)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, a2, t0) # fp[A] <- a0
/* ------------------------------ */
.balign 128
.L_op_iget_byte_quick: /* 0xf0 */
/* File: mips/op_iget_byte_quick.S */
/* File: mips/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- object we're operating on
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
# check object for null
beqz a3, common_errNullObject # object was null
addu t0, a3, a1
lb a0, 0(t0) # a0 <- obj.field (8/16/32 bits)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, a2, t0) # fp[A] <- a0
/* ------------------------------ */
.balign 128
.L_op_iget_char_quick: /* 0xf1 */
/* File: mips/op_iget_char_quick.S */
/* File: mips/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- object we're operating on
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
# check object for null
beqz a3, common_errNullObject # object was null
addu t0, a3, a1
lhu a0, 0(t0) # a0 <- obj.field (8/16/32 bits)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, a2, t0) # fp[A] <- a0
/* ------------------------------ */
.balign 128
.L_op_iget_short_quick: /* 0xf2 */
/* File: mips/op_iget_short_quick.S */
/* File: mips/op_iget_quick.S */
/* For: iget-quick, iget-boolean-quick, iget-byte-quick, iget-char-quick, iget-short-quick */
# op vA, vB, offset /* CCCC */
GET_OPB(a2) # a2 <- B
GET_VREG(a3, a2) # a3 <- object we're operating on
FETCH(a1, 1) # a1 <- field byte offset
GET_OPA4(a2) # a2 <- A(+)
# check object for null
beqz a3, common_errNullObject # object was null
addu t0, a3, a1
lh a0, 0(t0) # a0 <- obj.field (8/16/32 bits)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(a0, a2, t0) # fp[A] <- a0
/* ------------------------------ */
.balign 128
.L_op_invoke_lambda: /* 0xf3 */
/* Transfer stub to alternate interpreter */
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_f4: /* 0xf4 */
/* File: mips/op_unused_f4.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_capture_variable: /* 0xf5 */
/* Transfer stub to alternate interpreter */
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_create_lambda: /* 0xf6 */
/* Transfer stub to alternate interpreter */
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_liberate_variable: /* 0xf7 */
/* Transfer stub to alternate interpreter */
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_box_lambda: /* 0xf8 */
/* Transfer stub to alternate interpreter */
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unbox_lambda: /* 0xf9 */
/* Transfer stub to alternate interpreter */
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_fa: /* 0xfa */
/* File: mips/op_unused_fa.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_fb: /* 0xfb */
/* File: mips/op_unused_fb.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_fc: /* 0xfc */
/* File: mips/op_unused_fc.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_fd: /* 0xfd */
/* File: mips/op_unused_fd.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_fe: /* 0xfe */
/* File: mips/op_unused_fe.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
/* ------------------------------ */
.balign 128
.L_op_unused_ff: /* 0xff */
/* File: mips/op_unused_ff.S */
/* File: mips/unused.S */
/*
* Bail to reference interpreter to throw.
*/
b MterpFallback
.balign 128
.size artMterpAsmInstructionStart, .-artMterpAsmInstructionStart
.global artMterpAsmInstructionEnd
artMterpAsmInstructionEnd:
/*
* ===========================================================================
* Sister implementations
* ===========================================================================
*/
.global artMterpAsmSisterStart
.type artMterpAsmSisterStart, %function
.text
.balign 4
artMterpAsmSisterStart:
/* continuation for op_packed_switch */
.Lop_packed_switch_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_sparse_switch */
.Lop_sparse_switch_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_cmpl_float */
.Lop_cmpl_float_nan:
li rTEMP, -1
.Lop_cmpl_float_finish:
GET_OPA(rOBJ)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(rTEMP, rOBJ, t0) # vAA <- rTEMP
/* continuation for op_cmpg_float */
.Lop_cmpg_float_nan:
li rTEMP, 1
.Lop_cmpg_float_finish:
GET_OPA(rOBJ)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(rTEMP, rOBJ, t0) # vAA <- rTEMP
/* continuation for op_cmpl_double */
.Lop_cmpl_double_nan:
li rTEMP, -1
.Lop_cmpl_double_finish:
GET_OPA(rOBJ)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(rTEMP, rOBJ, t0) # vAA <- rTEMP
/* continuation for op_cmpg_double */
.Lop_cmpg_double_nan:
li rTEMP, 1
.Lop_cmpg_double_finish:
GET_OPA(rOBJ)
FETCH_ADVANCE_INST(2) # advance rPC, load rINST
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG_GOTO(rTEMP, rOBJ, t0) # vAA <- rTEMP
/* continuation for op_if_eq */
.L_op_if_eq_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_if_ne */
.L_op_if_ne_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_if_lt */
.L_op_if_lt_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_if_ge */
.L_op_if_ge_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_if_gt */
.L_op_if_gt_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_if_le */
.L_op_if_le_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_float_to_int */
/*
* Not an entry point as it is used only once !!
*/
f2i_doconv:
#ifdef MIPS32REVGE6
l.s fa1, .LFLOAT_TO_INT_max
cmp.ule.s ft2, fa1, fa0
l.s fv0, .LFLOAT_TO_INT_ret_max
bc1nez ft2, .Lop_float_to_int_set_vreg_f
l.s fa1, .LFLOAT_TO_INT_min
cmp.ule.s ft2, fa0, fa1
l.s fv0, .LFLOAT_TO_INT_ret_min
bc1nez ft2, .Lop_float_to_int_set_vreg_f
mov.s fa1, fa0
cmp.un.s ft2, fa0, fa1
li.s fv0, 0
bc1nez ft2, .Lop_float_to_int_set_vreg_f
#else
l.s fa1, .LFLOAT_TO_INT_max
c.ole.s fcc0, fa1, fa0
l.s fv0, .LFLOAT_TO_INT_ret_max
bc1t .Lop_float_to_int_set_vreg_f
l.s fa1, .LFLOAT_TO_INT_min
c.ole.s fcc0, fa0, fa1
l.s fv0, .LFLOAT_TO_INT_ret_min
bc1t .Lop_float_to_int_set_vreg_f
mov.s fa1, fa0
c.un.s fcc0, fa0, fa1
li.s fv0, 0
bc1t .Lop_float_to_int_set_vreg_f
#endif
trunc.w.s fv0, fa0
b .Lop_float_to_int_set_vreg_f
.LFLOAT_TO_INT_max:
.word 0x4f000000
.LFLOAT_TO_INT_min:
.word 0xcf000000
.LFLOAT_TO_INT_ret_max:
.word 0x7fffffff
.LFLOAT_TO_INT_ret_min:
.word 0x80000000
/* continuation for op_float_to_long */
f2l_doconv:
#ifdef MIPS32REVGE6
l.s fa1, .LLONG_TO_max
cmp.ule.s ft2, fa1, fa0
li rRESULT0, ~0
li rRESULT1, ~0x80000000
bc1nez ft2, .Lop_float_to_long_set_vreg
l.s fa1, .LLONG_TO_min
cmp.ule.s ft2, fa0, fa1
li rRESULT0, 0
li rRESULT1, 0x80000000
bc1nez ft2, .Lop_float_to_long_set_vreg
mov.s fa1, fa0
cmp.un.s ft2, fa0, fa1
li rRESULT0, 0
li rRESULT1, 0
bc1nez ft2, .Lop_float_to_long_set_vreg
#else
l.s fa1, .LLONG_TO_max
c.ole.s fcc0, fa1, fa0
li rRESULT0, ~0
li rRESULT1, ~0x80000000
bc1t .Lop_float_to_long_set_vreg
l.s fa1, .LLONG_TO_min
c.ole.s fcc0, fa0, fa1
li rRESULT0, 0
li rRESULT1, 0x80000000
bc1t .Lop_float_to_long_set_vreg
mov.s fa1, fa0
c.un.s fcc0, fa0, fa1
li rRESULT0, 0
li rRESULT1, 0
bc1t .Lop_float_to_long_set_vreg
#endif
JAL(__fixsfdi)
b .Lop_float_to_long_set_vreg
.LLONG_TO_max:
.word 0x5f000000
.LLONG_TO_min:
.word 0xdf000000
/* continuation for op_double_to_int */
d2i_doconv:
#ifdef MIPS32REVGE6
la t0, .LDOUBLE_TO_INT_max
LOAD64_F(fa1, fa1f, t0)
cmp.ule.d ft2, fa1, fa0
l.s fv0, .LDOUBLE_TO_INT_maxret
bc1nez ft2, .Lop_double_to_int_set_vreg_f
la t0, .LDOUBLE_TO_INT_min
LOAD64_F(fa1, fa1f, t0)
cmp.ule.d ft2, fa0, fa1
l.s fv0, .LDOUBLE_TO_INT_minret
bc1nez ft2, .Lop_double_to_int_set_vreg_f
mov.d fa1, fa0
cmp.un.d ft2, fa0, fa1
li.s fv0, 0
bc1nez ft2, .Lop_double_to_int_set_vreg_f
#else
la t0, .LDOUBLE_TO_INT_max
LOAD64_F(fa1, fa1f, t0)
c.ole.d fcc0, fa1, fa0
l.s fv0, .LDOUBLE_TO_INT_maxret
bc1t .Lop_double_to_int_set_vreg_f
la t0, .LDOUBLE_TO_INT_min
LOAD64_F(fa1, fa1f, t0)
c.ole.d fcc0, fa0, fa1
l.s fv0, .LDOUBLE_TO_INT_minret
bc1t .Lop_double_to_int_set_vreg_f
mov.d fa1, fa0
c.un.d fcc0, fa0, fa1
li.s fv0, 0
bc1t .Lop_double_to_int_set_vreg_f
#endif
trunc.w.d fv0, fa0
b .Lop_double_to_int_set_vreg_f
.LDOUBLE_TO_INT_max:
.dword 0x41dfffffffc00000
.LDOUBLE_TO_INT_min:
.dword 0xc1e0000000000000 # minint, as a double (high word)
.LDOUBLE_TO_INT_maxret:
.word 0x7fffffff
.LDOUBLE_TO_INT_minret:
.word 0x80000000
/* continuation for op_double_to_long */
d2l_doconv:
#ifdef MIPS32REVGE6
la t0, .LDOUBLE_TO_LONG_max
LOAD64_F(fa1, fa1f, t0)
cmp.ule.d ft2, fa1, fa0
la t0, .LDOUBLE_TO_LONG_ret_max
LOAD64(rRESULT0, rRESULT1, t0)
bc1nez ft2, .Lop_double_to_long_set_vreg
la t0, .LDOUBLE_TO_LONG_min
LOAD64_F(fa1, fa1f, t0)
cmp.ule.d ft2, fa0, fa1
la t0, .LDOUBLE_TO_LONG_ret_min
LOAD64(rRESULT0, rRESULT1, t0)
bc1nez ft2, .Lop_double_to_long_set_vreg
mov.d fa1, fa0
cmp.un.d ft2, fa0, fa1
li rRESULT0, 0
li rRESULT1, 0
bc1nez ft2, .Lop_double_to_long_set_vreg
#else
la t0, .LDOUBLE_TO_LONG_max
LOAD64_F(fa1, fa1f, t0)
c.ole.d fcc0, fa1, fa0
la t0, .LDOUBLE_TO_LONG_ret_max
LOAD64(rRESULT0, rRESULT1, t0)
bc1t .Lop_double_to_long_set_vreg
la t0, .LDOUBLE_TO_LONG_min
LOAD64_F(fa1, fa1f, t0)
c.ole.d fcc0, fa0, fa1
la t0, .LDOUBLE_TO_LONG_ret_min
LOAD64(rRESULT0, rRESULT1, t0)
bc1t .Lop_double_to_long_set_vreg
mov.d fa1, fa0
c.un.d fcc0, fa0, fa1
li rRESULT0, 0
li rRESULT1, 0
bc1t .Lop_double_to_long_set_vreg
#endif
JAL(__fixdfdi)
b .Lop_double_to_long_set_vreg
.LDOUBLE_TO_LONG_max:
.dword 0x43e0000000000000 # maxlong, as a double (high word)
.LDOUBLE_TO_LONG_min:
.dword 0xc3e0000000000000 # minlong, as a double (high word)
.LDOUBLE_TO_LONG_ret_max:
.dword 0x7fffffffffffffff
.LDOUBLE_TO_LONG_ret_min:
.dword 0x8000000000000000
/* continuation for op_mul_long */
.Lop_mul_long_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
SET_VREG64(v0, v1, a0) # vAA::vAA+1 <- v0(low) :: v1(high)
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_shl_long */
.Lop_shl_long_finish:
SET_VREG64_GOTO(zero, v0, t2, t0) # vAA/vAA+1 <- rlo/rhi
/* continuation for op_shr_long */
.Lop_shr_long_finish:
sra a3, a1, 31 # a3<- sign(ah)
SET_VREG64_GOTO(v1, a3, t3, t0) # vAA/VAA+1 <- rlo/rhi
/* continuation for op_ushr_long */
.Lop_ushr_long_finish:
SET_VREG64_GOTO(v1, zero, rOBJ, t0) # vAA/vAA+1 <- rlo/rhi
/* continuation for op_add_double */
.Lop_add_double_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_sub_double */
.Lop_sub_double_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_mul_double */
.Lop_mul_double_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_div_double */
.Lop_div_double_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_rem_double */
.Lop_rem_double_finish:
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/* continuation for op_shl_long_2addr */
.Lop_shl_long_2addr_finish:
SET_VREG64_GOTO(zero, v0, rOBJ, t0) # vAA/vAA+1 <- rlo/rhi
/* continuation for op_shr_long_2addr */
.Lop_shr_long_2addr_finish:
sra a3, a1, 31 # a3<- sign(ah)
SET_VREG64_GOTO(v1, a3, t2, t0) # vAA/vAA+1 <- rlo/rhi
/* continuation for op_ushr_long_2addr */
.Lop_ushr_long_2addr_finish:
SET_VREG64_GOTO(v1, zero, t3, t0) # vAA/vAA+1 <- rlo/rhi
.size artMterpAsmSisterStart, .-artMterpAsmSisterStart
.global artMterpAsmSisterEnd
artMterpAsmSisterEnd:
.global artMterpAsmAltInstructionStart
.type artMterpAsmAltInstructionStart, %function
.text
artMterpAsmAltInstructionStart = .L_ALT_op_nop
/* ------------------------------ */
.balign 128
.L_ALT_op_nop: /* 0x00 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (0 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move: /* 0x01 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (1 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_from16: /* 0x02 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (2 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_16: /* 0x03 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (3 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide: /* 0x04 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (4 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide_from16: /* 0x05 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (5 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_wide_16: /* 0x06 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (6 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object: /* 0x07 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (7 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object_from16: /* 0x08 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (8 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_object_16: /* 0x09 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (9 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result: /* 0x0a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (10 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result_wide: /* 0x0b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (11 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_result_object: /* 0x0c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (12 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_move_exception: /* 0x0d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (13 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_return_void: /* 0x0e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (14 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_return: /* 0x0f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (15 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_return_wide: /* 0x10 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (16 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_return_object: /* 0x11 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (17 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_4: /* 0x12 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (18 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_16: /* 0x13 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (19 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const: /* 0x14 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (20 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_high16: /* 0x15 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (21 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_16: /* 0x16 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (22 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_32: /* 0x17 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (23 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide: /* 0x18 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (24 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_wide_high16: /* 0x19 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (25 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_string: /* 0x1a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (26 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_string_jumbo: /* 0x1b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (27 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_const_class: /* 0x1c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (28 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_monitor_enter: /* 0x1d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (29 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_monitor_exit: /* 0x1e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (30 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_check_cast: /* 0x1f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (31 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_instance_of: /* 0x20 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (32 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_array_length: /* 0x21 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (33 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_new_instance: /* 0x22 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (34 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_new_array: /* 0x23 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (35 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_filled_new_array: /* 0x24 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (36 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_filled_new_array_range: /* 0x25 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (37 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_fill_array_data: /* 0x26 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (38 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_throw: /* 0x27 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (39 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_goto: /* 0x28 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (40 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_goto_16: /* 0x29 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (41 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_goto_32: /* 0x2a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (42 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_packed_switch: /* 0x2b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (43 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sparse_switch: /* 0x2c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (44 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpl_float: /* 0x2d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (45 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpg_float: /* 0x2e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (46 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpl_double: /* 0x2f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (47 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmpg_double: /* 0x30 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (48 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_cmp_long: /* 0x31 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (49 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_eq: /* 0x32 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (50 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ne: /* 0x33 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (51 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_lt: /* 0x34 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (52 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ge: /* 0x35 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (53 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gt: /* 0x36 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (54 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_le: /* 0x37 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (55 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_eqz: /* 0x38 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (56 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_nez: /* 0x39 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (57 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_ltz: /* 0x3a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (58 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gez: /* 0x3b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (59 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_gtz: /* 0x3c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (60 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_if_lez: /* 0x3d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (61 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_3e: /* 0x3e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (62 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_3f: /* 0x3f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (63 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_40: /* 0x40 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (64 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_41: /* 0x41 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (65 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_42: /* 0x42 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (66 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_43: /* 0x43 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (67 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget: /* 0x44 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (68 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_wide: /* 0x45 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (69 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_object: /* 0x46 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (70 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_boolean: /* 0x47 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (71 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_byte: /* 0x48 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (72 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_char: /* 0x49 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (73 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aget_short: /* 0x4a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (74 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput: /* 0x4b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (75 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_wide: /* 0x4c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (76 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_object: /* 0x4d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (77 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_boolean: /* 0x4e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (78 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_byte: /* 0x4f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (79 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_char: /* 0x50 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (80 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_aput_short: /* 0x51 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (81 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget: /* 0x52 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (82 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_wide: /* 0x53 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (83 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_object: /* 0x54 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (84 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_boolean: /* 0x55 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (85 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_byte: /* 0x56 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (86 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_char: /* 0x57 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (87 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_short: /* 0x58 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (88 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput: /* 0x59 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (89 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_wide: /* 0x5a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (90 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_object: /* 0x5b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (91 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_boolean: /* 0x5c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (92 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_byte: /* 0x5d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (93 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_char: /* 0x5e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (94 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_short: /* 0x5f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (95 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget: /* 0x60 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (96 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_wide: /* 0x61 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (97 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_object: /* 0x62 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (98 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_boolean: /* 0x63 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (99 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_byte: /* 0x64 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (100 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_char: /* 0x65 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (101 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sget_short: /* 0x66 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (102 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput: /* 0x67 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (103 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_wide: /* 0x68 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (104 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_object: /* 0x69 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (105 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_boolean: /* 0x6a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (106 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_byte: /* 0x6b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (107 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_char: /* 0x6c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (108 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sput_short: /* 0x6d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (109 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual: /* 0x6e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (110 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_super: /* 0x6f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (111 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_direct: /* 0x70 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (112 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_static: /* 0x71 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (113 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_interface: /* 0x72 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (114 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_return_void_no_barrier: /* 0x73 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (115 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_range: /* 0x74 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (116 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_super_range: /* 0x75 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (117 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_direct_range: /* 0x76 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (118 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_static_range: /* 0x77 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (119 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_interface_range: /* 0x78 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (120 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_79: /* 0x79 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (121 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_7a: /* 0x7a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (122 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_int: /* 0x7b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (123 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_not_int: /* 0x7c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (124 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_long: /* 0x7d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (125 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_not_long: /* 0x7e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (126 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_float: /* 0x7f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (127 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_neg_double: /* 0x80 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (128 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_long: /* 0x81 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (129 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_float: /* 0x82 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (130 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_double: /* 0x83 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (131 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_int: /* 0x84 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (132 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_float: /* 0x85 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (133 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_long_to_double: /* 0x86 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (134 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_int: /* 0x87 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (135 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_long: /* 0x88 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (136 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_float_to_double: /* 0x89 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (137 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_int: /* 0x8a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (138 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_long: /* 0x8b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (139 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_double_to_float: /* 0x8c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (140 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_byte: /* 0x8d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (141 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_char: /* 0x8e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (142 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_int_to_short: /* 0x8f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (143 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int: /* 0x90 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (144 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_int: /* 0x91 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (145 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int: /* 0x92 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (146 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int: /* 0x93 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (147 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int: /* 0x94 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (148 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int: /* 0x95 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (149 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int: /* 0x96 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (150 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int: /* 0x97 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (151 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int: /* 0x98 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (152 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int: /* 0x99 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (153 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int: /* 0x9a */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (154 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_long: /* 0x9b */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (155 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_long: /* 0x9c */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (156 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_long: /* 0x9d */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (157 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_long: /* 0x9e */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (158 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_long: /* 0x9f */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (159 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_long: /* 0xa0 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (160 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_long: /* 0xa1 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (161 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_long: /* 0xa2 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (162 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_long: /* 0xa3 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (163 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_long: /* 0xa4 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (164 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_long: /* 0xa5 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (165 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_float: /* 0xa6 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (166 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_float: /* 0xa7 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (167 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_float: /* 0xa8 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (168 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_float: /* 0xa9 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (169 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_float: /* 0xaa */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (170 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_double: /* 0xab */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (171 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_double: /* 0xac */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (172 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_double: /* 0xad */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (173 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_double: /* 0xae */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (174 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_double: /* 0xaf */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (175 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_2addr: /* 0xb0 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (176 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_int_2addr: /* 0xb1 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (177 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_2addr: /* 0xb2 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (178 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_2addr: /* 0xb3 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (179 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_2addr: /* 0xb4 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (180 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_2addr: /* 0xb5 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (181 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_2addr: /* 0xb6 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (182 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_2addr: /* 0xb7 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (183 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int_2addr: /* 0xb8 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (184 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int_2addr: /* 0xb9 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (185 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int_2addr: /* 0xba */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (186 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_long_2addr: /* 0xbb */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (187 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_long_2addr: /* 0xbc */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (188 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_long_2addr: /* 0xbd */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (189 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_long_2addr: /* 0xbe */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (190 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_long_2addr: /* 0xbf */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (191 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_long_2addr: /* 0xc0 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (192 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_long_2addr: /* 0xc1 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (193 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_long_2addr: /* 0xc2 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (194 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_long_2addr: /* 0xc3 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (195 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_long_2addr: /* 0xc4 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (196 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_long_2addr: /* 0xc5 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (197 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_float_2addr: /* 0xc6 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (198 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_float_2addr: /* 0xc7 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (199 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_float_2addr: /* 0xc8 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (200 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_float_2addr: /* 0xc9 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (201 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_float_2addr: /* 0xca */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (202 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_double_2addr: /* 0xcb */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (203 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_sub_double_2addr: /* 0xcc */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (204 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_double_2addr: /* 0xcd */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (205 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_double_2addr: /* 0xce */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (206 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_double_2addr: /* 0xcf */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (207 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_lit16: /* 0xd0 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (208 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rsub_int: /* 0xd1 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (209 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_lit16: /* 0xd2 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (210 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_lit16: /* 0xd3 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (211 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_lit16: /* 0xd4 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (212 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_lit16: /* 0xd5 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (213 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_lit16: /* 0xd6 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (214 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_lit16: /* 0xd7 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (215 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_add_int_lit8: /* 0xd8 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (216 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rsub_int_lit8: /* 0xd9 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (217 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_mul_int_lit8: /* 0xda */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (218 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_div_int_lit8: /* 0xdb */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (219 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_rem_int_lit8: /* 0xdc */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (220 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_and_int_lit8: /* 0xdd */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (221 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_or_int_lit8: /* 0xde */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (222 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_xor_int_lit8: /* 0xdf */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (223 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shl_int_lit8: /* 0xe0 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (224 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_shr_int_lit8: /* 0xe1 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (225 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_ushr_int_lit8: /* 0xe2 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (226 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_quick: /* 0xe3 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (227 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_wide_quick: /* 0xe4 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (228 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_object_quick: /* 0xe5 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (229 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_quick: /* 0xe6 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (230 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_wide_quick: /* 0xe7 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (231 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_object_quick: /* 0xe8 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (232 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_quick: /* 0xe9 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (233 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_virtual_range_quick: /* 0xea */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (234 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_boolean_quick: /* 0xeb */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (235 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_byte_quick: /* 0xec */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (236 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_char_quick: /* 0xed */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (237 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iput_short_quick: /* 0xee */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (238 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_boolean_quick: /* 0xef */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (239 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_byte_quick: /* 0xf0 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (240 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_char_quick: /* 0xf1 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (241 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_iget_short_quick: /* 0xf2 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (242 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_invoke_lambda: /* 0xf3 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (243 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_f4: /* 0xf4 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (244 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_capture_variable: /* 0xf5 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (245 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_create_lambda: /* 0xf6 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (246 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_liberate_variable: /* 0xf7 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (247 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_box_lambda: /* 0xf8 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (248 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unbox_lambda: /* 0xf9 */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (249 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_fa: /* 0xfa */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (250 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_fb: /* 0xfb */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (251 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_fc: /* 0xfc */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (252 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_fd: /* 0xfd */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (253 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_fe: /* 0xfe */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (254 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
/* ------------------------------ */
.balign 128
.L_ALT_op_unused_ff: /* 0xff */
/* File: mips/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to MterpCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to MterpCheckBefore is done as a tail call.
*/
.extern MterpCheckBefore
EXPORT_PC()
la ra, artMterpAsmInstructionStart + (255 * 128) # Addr of primary handler
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh IBASE
move a0, rSELF # arg0
addu a1, rFP, OFF_FP_SHADOWFRAME # arg1
la a2, MterpCheckBefore
jalr zero, a2 # Tail call to Mterp(self, shadow_frame)
.balign 128
.size artMterpAsmAltInstructionStart, .-artMterpAsmAltInstructionStart
.global artMterpAsmAltInstructionEnd
artMterpAsmAltInstructionEnd:
/* File: mips/footer.S */
/*
* ===========================================================================
* Common subroutines and data
* ===========================================================================
*/
.text
.align 2
/*
* We've detected a condition that will result in an exception, but the exception
* has not yet been thrown. Just bail out to the reference interpreter to deal with it.
* TUNING: for consistency, we may want to just go ahead and handle these here.
*/
common_errDivideByZero:
EXPORT_PC()
#if MTERP_LOGGING
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
JAL(MterpLogDivideByZeroException)
#endif
b MterpCommonFallback
common_errArrayIndex:
EXPORT_PC()
#if MTERP_LOGGING
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
JAL(MterpLogArrayIndexException)
#endif
b MterpCommonFallback
common_errNegativeArraySize:
EXPORT_PC()
#if MTERP_LOGGING
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
JAL(MterpLogNegativeArraySizeException)
#endif
b MterpCommonFallback
common_errNoSuchMethod:
EXPORT_PC()
#if MTERP_LOGGING
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
JAL(MterpLogNoSuchMethodException)
#endif
b MterpCommonFallback
common_errNullObject:
EXPORT_PC()
#if MTERP_LOGGING
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
JAL(MterpLogNullObjectException)
#endif
b MterpCommonFallback
common_exceptionThrown:
EXPORT_PC()
#if MTERP_LOGGING
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
JAL(MterpLogExceptionThrownException)
#endif
b MterpCommonFallback
MterpSuspendFallback:
EXPORT_PC()
#if MTERP_LOGGING
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
lw a2, THREAD_FLAGS_OFFSET(rSELF)
JAL(MterpLogSuspendFallback)
#endif
b MterpCommonFallback
/*
* If we're here, something is out of the ordinary. If there is a pending
* exception, handle it. Otherwise, roll back and retry with the reference
* interpreter.
*/
MterpPossibleException:
lw a0, THREAD_EXCEPTION_OFFSET(rSELF)
beqz a0, MterpFallback # If exception, fall back to reference interpreter.
/* intentional fallthrough - handle pending exception. */
/*
* On return from a runtime helper routine, we've found a pending exception.
* Can we handle it here - or need to bail out to caller?
*
*/
MterpException:
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
JAL(MterpHandleException) # (self, shadow_frame)
beqz v0, MterpExceptionReturn # no local catch, back to caller.
lw a0, OFF_FP_CODE_ITEM(rFP)
lw a1, OFF_FP_DEX_PC(rFP)
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF)
addu rPC, a0, CODEITEM_INSNS_OFFSET
sll a1, a1, 1
addu rPC, rPC, a1 # generate new dex_pc_ptr
/* Do we need to switch interpreters? */
JAL(MterpShouldSwitchInterpreters)
bnez v0, MterpFallback
/* resume execution at catch block */
EXPORT_PC()
FETCH_INST()
GET_INST_OPCODE(t0)
GOTO_OPCODE(t0)
/* NOTE: no fallthrough */
/*
* Check for suspend check request. Assumes rINST already loaded, rPC advanced and
* still needs to get the opcode and branch to it, and flags are in lr.
*/
MterpCheckSuspendAndContinue:
lw rIBASE, THREAD_CURRENT_IBASE_OFFSET(rSELF) # refresh rIBASE
and ra, (THREAD_SUSPEND_REQUEST | THREAD_CHECKPOINT_REQUEST)
bnez ra, 1f
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
1:
EXPORT_PC()
move a0, rSELF
JAL(MterpSuspendCheck) # (self)
bnez v0, MterpFallback
GET_INST_OPCODE(t0) # extract opcode from rINST
GOTO_OPCODE(t0) # jump to next instruction
/*
* On-stack replacement has happened, and now we've returned from the compiled method.
*/
MterpOnStackReplacement:
#if MTERP_LOGGING
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
move a2, rINST
JAL(MterpLogOSR)
#endif
li v0, 1 # Signal normal return
b MterpDone
/*
* Bail out to reference interpreter.
*/
MterpFallback:
EXPORT_PC()
#if MTERP_LOGGING
move a0, rSELF
addu a1, rFP, OFF_FP_SHADOWFRAME
JAL(MterpLogFallback)
#endif
MterpCommonFallback:
move v0, zero # signal retry with reference interpreter.
b MterpDone
/*
* We pushed some registers on the stack in ExecuteMterpImpl, then saved
* SP and LR. Here we restore SP, restore the registers, and then restore
* LR to PC.
*
* On entry:
* uint32_t* rFP (should still be live, pointer to base of vregs)
*/
MterpExceptionReturn:
li v0, 1 # signal return to caller.
b MterpDone
MterpReturn:
lw a2, OFF_FP_RESULT_REGISTER(rFP)
sw v0, 0(a2)
sw v1, 4(a2)
li v0, 1 # signal return to caller.
MterpDone:
/* Restore from the stack and return. Frame size = STACK_SIZE */
STACK_LOAD_FULL()
jalr zero, ra
.end ExecuteMterpImpl