/******************************************************************************
*
* Copyright (C) 2015 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*****************************************************************************
* Originally developed and contributed by Ittiam Systems Pvt. Ltd, Bangalore
*/
/**
*******************************************************************************
* @file
* ih264e_error.h
*
* @brief
* Definitions related to error handling
*
* @author
* ittiam
*
* @remarks
* None
*
*******************************************************************************
*/
#ifndef IH264E_ERROR_H_
#define IH264E_ERROR_H_
/**
******************************************************************************
* @brief Error start codes for various classes of errors in H264 encoder
******************************************************************************
*/
#define SET_ERROR_ON_RETURN(error, severity, out_status, ret_code) \
if (error != IH264E_SUCCESS) \
{\
out_status = ((1 << severity) | error);\
return (ret_code);\
}
/**
******************************************************************************
* @brief Extended error code for each error in H264 encoder
******************************************************************************
*/
typedef enum
{
/* NOTE: the ive error codes ends at 0x80 */
IVE_ERR_CODEC_EXTENSIONS = 0x80,
/* bit stream error start */
IH264E_BITSTREAM_ERROR_START = IVE_ERR_CODEC_EXTENSIONS,
/* codec error start */
IH264E_CODEC_ERROR_START = IH264E_BITSTREAM_ERROR_START + 0x10,
/** no error */
IH264E_SUCCESS = 0,
/** bitstream init failure, buffer ptr not aligned to WORD (32bits) */
IH264E_BITSTREAM_BUFPTR_ALIGN_FAIL = IH264E_BITSTREAM_ERROR_START + 0x01,
/** bitstream init failure, buf size not multiple of WORD size (32bits) */
IH264E_BITSTREAM_BUFSIZE_ALIGN_FAIL = IH264E_BITSTREAM_ERROR_START + 0x02,
/** bitstream runtime failure, buf size limit exceeded during encode */
IH264E_BITSTREAM_BUFFER_OVERFLOW = IH264E_BITSTREAM_ERROR_START + 0x03,
/**width not set within supported limit */
IH264E_WIDTH_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x01,
/**height not set within supported limit */
IH264E_HEIGHT_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x02,
/**Unsupported number of reference pictures passed as an argument */
IH264E_NUM_REF_UNSUPPORTED = IH264E_CODEC_ERROR_START + 0x03,
/**Unsupported number of reference pictures passed as an argument */
IH264E_NUM_REORDER_UNSUPPORTED = IH264E_CODEC_ERROR_START + 0x04,
/**codec level not supported */
IH264E_CODEC_LEVEL_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x05,
/**input chroma format not supported */
IH264E_INPUT_CHROMA_FORMAT_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x06,
/**recon chroma format not supported */
IH264E_RECON_CHROMA_FORMAT_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x07,
/**rate control option configured is not supported */
IH264E_RATE_CONTROL_MODE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x08,
/**frame rate configured is not supported */
IH264E_FRAME_RATE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x09,
/**bit rate configured is not supported */
IH264E_BITRATE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0A,
/**frame rate not supported */
IH264E_BFRAMES_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0B,
/**content type not supported */
IH264E_CONTENT_TYPE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0C,
/**unsupported horizontal search range */
IH264E_HORIZONTAL_SEARCH_RANGE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0D,
/**unsupported vertical search range */
IH264E_VERTICAL_SEARCH_RANGE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x0E,
/**Unsupported slice type input */
IH264E_SLICE_TYPE_INPUT_INVALID = IH264E_CODEC_ERROR_START + 0x0F,
/**unsupported architecture type */
IH264E_ARCH_TYPE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x10,
/**unsupported soc type */
IH264E_SOC_TYPE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x11,
/**target frame rate exceeds source frame rate */
IH264E_TGT_FRAME_RATE_EXCEEDS_SRC_FRAME_RATE = IH264E_CODEC_ERROR_START + 0x12,
/**invalid force frame input */
IH264E_INVALID_FORCE_FRAME_INPUT = IH264E_CODEC_ERROR_START + 0x13,
/**invalid me speed preset */
IH264E_INVALID_ME_SPEED_PRESET = IH264E_CODEC_ERROR_START + 0x14,
/**invalid encoder speed preset */
IH264E_INVALID_ENC_SPEED_PRESET = IH264E_CODEC_ERROR_START + 0x15,
/**invalid deblocking param */
IH264E_INVALID_DEBLOCKING_TYPE_INPUT = IH264E_CODEC_ERROR_START + 0x16,
/**invalid max qp */
IH264E_INVALID_MAX_FRAME_QP = IH264E_CODEC_ERROR_START + 0x17,
/**invalid min qp */
IH264E_INVALID_MIN_FRAME_QP = IH264E_CODEC_ERROR_START + 0x18,
/**invalid init qp */
IH264E_INVALID_INIT_QP = IH264E_CODEC_ERROR_START + 0x19,
/**version buffer size is insufficient */
IH264E_CXA_VERS_BUF_INSUFFICIENT = IH264E_CODEC_ERROR_START + 0x1A,
/**init not done */
IH264E_INIT_NOT_DONE = IH264E_CODEC_ERROR_START + 0x1B,
/**invalid refresh type input */
IH264E_INVALID_AIR_MODE = IH264E_CODEC_ERROR_START + 0x1C,
/** Unsupported air mode */
IH264E_INVALID_AIR_REFRESH_PERIOD = IH264E_CODEC_ERROR_START + 0x1D,
/**In sufficient memory allocated for MV Bank */
IH264E_INSUFFICIENT_MEM_MVBANK = IH264E_CODEC_ERROR_START + 0x1E,
/**In sufficient memory allocated for MV Bank */
IH264E_INSUFFICIENT_MEM_PICBUF = IH264E_CODEC_ERROR_START + 0x1F,
/**Buffer manager error */
IH264E_BUF_MGR_ERROR = IH264E_CODEC_ERROR_START + 0x20,
/**No free MV Bank buffer available to store current pic */
IH264E_NO_FREE_MVBANK = IH264E_CODEC_ERROR_START + 0x21,
/**No free picture buffer available to store current pic */
IH264E_NO_FREE_PICBUF = IH264E_CODEC_ERROR_START + 0x22,
/**Invalid encoder operation mode */
IH264E_INVALID_ENC_OPERATION_MODE = IH264E_CODEC_ERROR_START + 0x23,
/**Invalid half pel option */
IH264E_INVALID_HALFPEL_OPTION = IH264E_CODEC_ERROR_START + 0x24,
/**Invalid quarter pel option */
IH264E_INVALID_QPEL_OPTION = IH264E_CODEC_ERROR_START + 0x25,
/**Invalid fast sad option */
IH264E_INVALID_FAST_SAD_OPTION = IH264E_CODEC_ERROR_START + 0x26,
/**Invalid intra 4x4 option */
IH264E_INVALID_INTRA4x4_OPTION = IH264E_CODEC_ERROR_START + 0x27,
/**Invalid intra frame interval */
IH264E_INVALID_INTRA_FRAME_INTERVAL = IH264E_CODEC_ERROR_START + 0x28,
/**Invalid idr frame interval */
IH264E_INVALID_IDR_FRAME_INTERVAL = IH264E_CODEC_ERROR_START + 0x29,
/**Invalid buffer delay */
IH264E_INVALID_BUFFER_DELAY = IH264E_CODEC_ERROR_START + 0x2A,
/**Invalid num cores */
IH264E_INVALID_NUM_CORES = IH264E_CODEC_ERROR_START + 0x2B,
/**profile not supported */
IH264E_PROFILE_NOT_SUPPORTED = IH264E_CODEC_ERROR_START + 0x2C,
/**Unsupported slice type input */
IH264E_SLICE_PARAM_INPUT_INVALID = IH264E_CODEC_ERROR_START + 0x2D,
/**Invalid alt ref option */
IH264E_INVALID_ALT_REF_OPTION = IH264E_CODEC_ERROR_START + 0x2E,
/**No free picture buffer available to store recon pic */
IH264E_NO_FREE_RECONBUF = IH264E_CODEC_ERROR_START + 0x2F,
/**Not enough memory allocated as output buffer */
IH264E_INSUFFICIENT_OUTPUT_BUFFER = IH264E_CODEC_ERROR_START + 0x30,
/**Invalid entropy coding mode */
IH264E_INVALID_ENTROPY_CODING_MODE = IH264E_CODEC_ERROR_START + 0x31,
/**max failure error code to ensure enum is 32 bits wide */
IH264E_FAIL = -1,
}IH264E_ERROR_T;
#endif /* IH264E_ERROR_H_ */