/*
*******************************************************************************
* Copyright (C) 2003-2013, International Business Machines
* Corporation and others. All Rights Reserved.
*******************************************************************************
* file name: ucm.h
* encoding: US-ASCII
* tab size: 8 (not used)
* indentation:4
*
* created on: 2003jun20
* created by: Markus W. Scherer
*
* Definitions for the .ucm file parser and handler module ucm.c.
*/
#ifndef __UCM_H__
#define __UCM_H__
#include "unicode/utypes.h"
#include "ucnvmbcs.h"
#include "ucnv_ext.h"
#include "filestrm.h"
#include <stdio.h>
#if !UCONFIG_NO_CONVERSION
U_CDECL_BEGIN
/* constants for UCMapping.moveFlag */
enum {
UCM_MOVE_TO_EXT=1,
UCM_REMOVE_MAPPING=2
};
/*
* Per-mapping data structure
*
* u if uLen==1: Unicode code point
* else index to uLen code points
* b if bLen<=4: up to 4 bytes
* else index to bLen bytes
* uLen number of code points
* bLen number of words containing left-justified bytes
* bIsMultipleChars indicates that the bytes contain more than one sequence
* according to the state table
* f flag for roundtrip (0), fallback (1), sub mapping (2), reverse fallback (3)
* or "good one-way" mapping (4).
* Same values as in the source file after |
*/
typedef struct UCMapping {
UChar32 u;
union {
uint32_t idx;
uint8_t bytes[4];
} b;
int8_t uLen, bLen, f, moveFlag;
} UCMapping;
/* constants for UCMTable.flagsType */
enum {
UCM_FLAGS_INITIAL, /* no mappings parsed yet */
UCM_FLAGS_EXPLICIT, /* .ucm file has mappings with | fallback indicators */
UCM_FLAGS_IMPLICIT, /* .ucm file has mappings without | fallback indicators, later wins */
UCM_FLAGS_MIXED /* both implicit and explicit */
};
typedef struct UCMTable {
UCMapping *mappings;
int32_t mappingsCapacity, mappingsLength;
UChar32 *codePoints;
int32_t codePointsCapacity, codePointsLength;
uint8_t *bytes;
int32_t bytesCapacity, bytesLength;
/* index map for mapping by bytes first */
int32_t *reverseMap;
uint8_t unicodeMask;
int8_t flagsType; /* UCM_FLAGS_INITIAL etc. */
UBool isSorted;
} UCMTable;
enum {
MBCS_STATE_FLAG_DIRECT=1,
MBCS_STATE_FLAG_SURROGATES,
MBCS_STATE_FLAG_READY=16
};
typedef struct UCMStates {
int32_t stateTable[MBCS_MAX_STATE_COUNT][256];
uint32_t stateFlags[MBCS_MAX_STATE_COUNT],
stateOffsetSum[MBCS_MAX_STATE_COUNT];
int32_t countStates, minCharLength, maxCharLength, countToUCodeUnits;
int8_t conversionType, outputType;
} UCMStates;
typedef struct UCMFile {
UCMTable *base, *ext;
UCMStates states;
char baseName[UCNV_MAX_CONVERTER_NAME_LENGTH];
} UCMFile;
/* simple accesses ---------------------------------------------------------- */
#define UCM_GET_CODE_POINTS(t, m) \
(((m)->uLen==1) ? &(m)->u : (t)->codePoints+(m)->u)
#define UCM_GET_BYTES(t, m) \
(((m)->bLen<=4) ? (m)->b.bytes : (t)->bytes+(m)->b.idx)
/* APIs --------------------------------------------------------------------- */
U_CAPI UCMFile * U_EXPORT2
ucm_open(void);
U_CAPI void U_EXPORT2
ucm_close(UCMFile *ucm);
U_CAPI UBool U_EXPORT2
ucm_parseHeaderLine(UCMFile *ucm,
char *line, char **pKey, char **pValue);
/* @return -1 illegal bytes 0 suitable for base table 1 needs to go into extension table */
U_CAPI int32_t U_EXPORT2
ucm_mappingType(UCMStates *baseStates,
UCMapping *m,
UChar32 codePoints[UCNV_EXT_MAX_UCHARS],
uint8_t bytes[UCNV_EXT_MAX_BYTES]);
/* add a mapping to the base or extension table as appropriate */
U_CAPI UBool U_EXPORT2
ucm_addMappingAuto(UCMFile *ucm, UBool forBase, UCMStates *baseStates,
UCMapping *m,
UChar32 codePoints[UCNV_EXT_MAX_UCHARS],
uint8_t bytes[UCNV_EXT_MAX_BYTES]);
U_CAPI UBool U_EXPORT2
ucm_addMappingFromLine(UCMFile *ucm, const char *line, UBool forBase, UCMStates *baseStates);
U_CAPI UCMTable * U_EXPORT2
ucm_openTable(void);
U_CAPI void U_EXPORT2
ucm_closeTable(UCMTable *table);
U_CAPI void U_EXPORT2
ucm_resetTable(UCMTable *table);
U_CAPI void U_EXPORT2
ucm_sortTable(UCMTable *t);
/*
* Remove mappings with their move flag set from the base table
* and move some of them (with UCM_MOVE_TO_EXT) to the extension table.
*/
U_CAPI void U_EXPORT2
ucm_moveMappings(UCMTable *base, UCMTable *ext);
/**
* Read a table from a .ucm file, from after the CHARMAP line to
* including the END CHARMAP line.
*/
U_CAPI void U_EXPORT2
ucm_readTable(UCMFile *ucm, FileStream* convFile,
UBool forBase, UCMStates *baseStates,
UErrorCode *pErrorCode);
/**
* Check the validity of mappings against a base table's states;
* necessary for extension-only tables that were read before their base tables.
*/
U_CAPI UBool U_EXPORT2
ucm_checkValidity(UCMTable *ext, UCMStates *baseStates);
/**
* Check a base table against an extension table.
* Set the moveTarget!=NULL if it is possible to move mappings from the base.
* This is the case where base and extension tables are parsed from a single file
* (moveTarget==ext)
* or when delta file mappings are subtracted from a base table.
*
* When a base table cannot be modified because a delta file is parsed in makeconv,
* then set moveTarget=NULL.
*
* if(intersectBase) then mappings that exist in the base table but not in
* the extension table are moved to moveTarget instead of showing an error.
*
* Special mode:
* If intersectBase==2 for a DBCS extension table, then SBCS mappings are
* not moved out of the base unless their Unicode input requires it.
* This helps ucmkbase generate base tables for DBCS-only extension .cnv files.
*
* For both tables in the same file, the extension table is automatically
* built.
* For separate files, the extension file can use a complete mapping table (.ucm file),
* so that common mappings need not be stripped out manually.
*
*
* Sort both tables, and then for each mapping direction:
*
* If intersectBase is TRUE and the base table contains a mapping
* that does not exist in the extension table, then this mapping is moved
* to moveTarget.
*
* - otherwise -
*
* If the base table contains a mapping for which the input sequence is
* the same as the extension input, then
* - if the output is the same: remove the extension mapping
* - else: error
*
* If the base table contains a mapping for which the input sequence is
* a prefix of the extension input, then
* - if moveTarget!=NULL: move the base mapping to the moveTarget table
* - else: error
*
* @return FALSE in case of an irreparable error
*/
U_CAPI UBool U_EXPORT2
ucm_checkBaseExt(UCMStates *baseStates, UCMTable *base, UCMTable *ext,
UCMTable *moveTarget, UBool intersectBase);
U_CAPI void U_EXPORT2
ucm_printTable(UCMTable *table, FILE *f, UBool byUnicode);
U_CAPI void U_EXPORT2
ucm_printMapping(UCMTable *table, UCMapping *m, FILE *f);
U_CAPI void U_EXPORT2
ucm_addState(UCMStates *states, const char *s);
U_CAPI void U_EXPORT2
ucm_processStates(UCMStates *states, UBool ignoreSISOCheck);
U_CAPI int32_t U_EXPORT2
ucm_countChars(UCMStates *states,
const uint8_t *bytes, int32_t length);
U_CAPI int8_t U_EXPORT2
ucm_parseBytes(uint8_t bytes[UCNV_EXT_MAX_BYTES], const char *line, const char **ps);
U_CAPI UBool U_EXPORT2
ucm_parseMappingLine(UCMapping *m,
UChar32 codePoints[UCNV_EXT_MAX_UCHARS],
uint8_t bytes[UCNV_EXT_MAX_BYTES],
const char *line);
U_CAPI void U_EXPORT2
ucm_addMapping(UCMTable *table,
UCMapping *m,
UChar32 codePoints[UCNV_EXT_MAX_UCHARS],
uint8_t bytes[UCNV_EXT_MAX_BYTES]);
/* very makeconv-specific functions ----------------------------------------- */
/* finalize and optimize states after the toUnicode mappings are processed */
U_CAPI void U_EXPORT2
ucm_optimizeStates(UCMStates *states,
uint16_t **pUnicodeCodeUnits,
_MBCSToUFallback *toUFallbacks, int32_t countToUFallbacks,
UBool verbose);
/* moved here because it is used inside ucmstate.c */
U_CAPI int32_t U_EXPORT2
ucm_findFallback(_MBCSToUFallback *toUFallbacks, int32_t countToUFallbacks,
uint32_t offset);
/* very rptp2ucm-specific functions ----------------------------------------- */
/*
* Input: Separate tables with mappings from/to Unicode,
* subchar and subchar1 (0 if none).
* All mappings must have flag 0.
*
* Output: fromUTable will contain the union of mappings with the correct
* precision flags, and be sorted.
*/
U_CAPI void U_EXPORT2
ucm_mergeTables(UCMTable *fromUTable, UCMTable *toUTable,
const uint8_t *subchar, int32_t subcharLength,
uint8_t subchar1);
U_CAPI UBool U_EXPORT2
ucm_separateMappings(UCMFile *ucm, UBool isSISO);
U_CDECL_END
#endif
#endif