// Copyright 2006 Google Inc. All Rights Reserved.
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// worker.cc : individual tasks that can be run in combination to
// stress the system
#include <errno.h>
#include <pthread.h>
#include <sched.h>
#include <signal.h>
#include <stdlib.h>
#include <stdio.h>
#include <stdint.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#include <sys/select.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/times.h>
// These are necessary, but on by default
// #define __USE_GNU
// #define __USE_LARGEFILE64
#include <fcntl.h>
#include <sys/socket.h>
#include <netdb.h>
#include <arpa/inet.h>
#include <linux/unistd.h> // for gettid
// For size of block device
#include <sys/ioctl.h>
#include <linux/fs.h>
// For asynchronous I/O
#ifdef HAVE_LIBAIO_H
#include <libaio.h>
#endif
#include <sys/syscall.h>
#include <set>
#include <string>
// This file must work with autoconf on its public version,
// so these includes are correct.
#include "error_diag.h" // NOLINT
#include "os.h" // NOLINT
#include "pattern.h" // NOLINT
#include "queue.h" // NOLINT
#include "sat.h" // NOLINT
#include "sattypes.h" // NOLINT
#include "worker.h" // NOLINT
// Syscalls
// Why ubuntu, do you hate gettid so bad?
#if !defined(__NR_gettid)
#define __NR_gettid 224
#endif
#define gettid() syscall(__NR_gettid)
#if !defined(CPU_SETSIZE)
_syscall3(int, sched_getaffinity, pid_t, pid,
unsigned int, len, cpu_set_t*, mask)
_syscall3(int, sched_setaffinity, pid_t, pid,
unsigned int, len, cpu_set_t*, mask)
#endif
namespace {
// Get HW core ID from cpuid instruction.
inline int apicid(void) {
int cpu;
#if defined(STRESSAPPTEST_CPU_X86_64) || defined(STRESSAPPTEST_CPU_I686)
__asm __volatile("cpuid" : "=b" (cpu) : "a" (1) : "cx", "dx");
#elif defined(STRESSAPPTEST_CPU_ARMV7A)
#warning "Unsupported CPU type ARMV7A: unable to determine core ID."
cpu = 0;
#else
#warning "Unsupported CPU type: unable to determine core ID."
cpu = 0;
#endif
return (cpu >> 24);
}
// Work around the sad fact that there are two (gnu, xsi) incompatible
// versions of strerror_r floating around google. Awesome.
bool sat_strerror(int err, char *buf, int len) {
buf[0] = 0;
char *errmsg = reinterpret_cast<char*>(strerror_r(err, buf, len));
int retval = reinterpret_cast<int64>(errmsg);
if (retval == 0)
return true;
if (retval == -1)
return false;
if (errmsg != buf) {
strncpy(buf, errmsg, len);
buf[len - 1] = 0;
}
return true;
}
inline uint64 addr_to_tag(void *address) {
return reinterpret_cast<uint64>(address);
}
}
#if !defined(O_DIRECT)
// Sometimes this isn't available.
// Disregard if it's not defined.
#define O_DIRECT 0
#endif
// A struct to hold captured errors, for later reporting.
struct ErrorRecord {
uint64 actual; // This is the actual value read.
uint64 reread; // This is the actual value, reread.
uint64 expected; // This is what it should have been.
uint64 *vaddr; // This is where it was (or wasn't).
char *vbyteaddr; // This is byte specific where the data was (or wasn't).
uint64 paddr; // This is the bus address, if available.
uint64 *tagvaddr; // This holds the tag value if this data was tagged.
uint64 tagpaddr; // This holds the physical address corresponding to the tag.
};
// This is a helper function to create new threads with pthreads.
static void *ThreadSpawnerGeneric(void *ptr) {
WorkerThread *worker = static_cast<WorkerThread*>(ptr);
worker->StartRoutine();
return NULL;
}
void WorkerStatus::Initialize() {
sat_assert(0 == pthread_mutex_init(&num_workers_mutex_, NULL));
sat_assert(0 == pthread_rwlock_init(&status_rwlock_, NULL));
#ifdef _POSIX_BARRIERS
sat_assert(0 == pthread_barrier_init(&pause_barrier_, NULL,
num_workers_ + 1));
#endif
}
void WorkerStatus::Destroy() {
sat_assert(0 == pthread_mutex_destroy(&num_workers_mutex_));
sat_assert(0 == pthread_rwlock_destroy(&status_rwlock_));
#ifdef _POSIX_BARRIERS
sat_assert(0 == pthread_barrier_destroy(&pause_barrier_));
#endif
}
void WorkerStatus::PauseWorkers() {
if (SetStatus(PAUSE) != PAUSE)
WaitOnPauseBarrier();
}
void WorkerStatus::ResumeWorkers() {
if (SetStatus(RUN) == PAUSE)
WaitOnPauseBarrier();
}
void WorkerStatus::StopWorkers() {
if (SetStatus(STOP) == PAUSE)
WaitOnPauseBarrier();
}
bool WorkerStatus::ContinueRunning() {
// This loop is an optimization. We use it to immediately re-check the status
// after resuming from a pause, instead of returning and waiting for the next
// call to this function.
for (;;) {
switch (GetStatus()) {
case RUN:
return true;
case PAUSE:
// Wait for the other workers to call this function so that
// PauseWorkers() can return.
WaitOnPauseBarrier();
// Wait for ResumeWorkers() to be called.
WaitOnPauseBarrier();
break;
case STOP:
return false;
}
}
}
bool WorkerStatus::ContinueRunningNoPause() {
return (GetStatus() != STOP);
}
void WorkerStatus::RemoveSelf() {
// Acquire a read lock on status_rwlock_ while (status_ != PAUSE).
for (;;) {
AcquireStatusReadLock();
if (status_ != PAUSE)
break;
// We need to obey PauseWorkers() just like ContinueRunning() would, so that
// the other threads won't wait on pause_barrier_ forever.
ReleaseStatusLock();
// Wait for the other workers to call this function so that PauseWorkers()
// can return.
WaitOnPauseBarrier();
// Wait for ResumeWorkers() to be called.
WaitOnPauseBarrier();
}
// This lock would be unnecessary if we held a write lock instead of a read
// lock on status_rwlock_, but that would also force all threads calling
// ContinueRunning() to wait on this one. Using a separate lock avoids that.
AcquireNumWorkersLock();
// Decrement num_workers_ and reinitialize pause_barrier_, which we know isn't
// in use because (status != PAUSE).
#ifdef _POSIX_BARRIERS
sat_assert(0 == pthread_barrier_destroy(&pause_barrier_));
sat_assert(0 == pthread_barrier_init(&pause_barrier_, NULL, num_workers_));
#endif
--num_workers_;
ReleaseNumWorkersLock();
// Release status_rwlock_.
ReleaseStatusLock();
}
// Parent thread class.
WorkerThread::WorkerThread() {
status_ = false;
pages_copied_ = 0;
errorcount_ = 0;
runduration_usec_ = 1;
priority_ = Normal;
worker_status_ = NULL;
thread_spawner_ = &ThreadSpawnerGeneric;
tag_mode_ = false;
}
WorkerThread::~WorkerThread() {}
// Constructors. Just init some default values.
FillThread::FillThread() {
num_pages_to_fill_ = 0;
}
// Initialize file name to empty.
FileThread::FileThread() {
filename_ = "";
devicename_ = "";
pass_ = 0;
page_io_ = true;
crc_page_ = -1;
local_page_ = NULL;
}
// If file thread used bounce buffer in memory, account for the extra
// copy for memory bandwidth calculation.
float FileThread::GetMemoryCopiedData() {
if (!os_->normal_mem())
return GetCopiedData();
else
return 0;
}
// Initialize target hostname to be invalid.
NetworkThread::NetworkThread() {
snprintf(ipaddr_, sizeof(ipaddr_), "Unknown");
sock_ = 0;
}
// Initialize?
NetworkSlaveThread::NetworkSlaveThread() {
}
// Initialize?
NetworkListenThread::NetworkListenThread() {
}
// Init member variables.
void WorkerThread::InitThread(int thread_num_init,
class Sat *sat_init,
class OsLayer *os_init,
class PatternList *patternlist_init,
WorkerStatus *worker_status) {
sat_assert(worker_status);
worker_status->AddWorkers(1);
thread_num_ = thread_num_init;
sat_ = sat_init;
os_ = os_init;
patternlist_ = patternlist_init;
worker_status_ = worker_status;
AvailableCpus(&cpu_mask_);
tag_ = 0xffffffff;
tag_mode_ = sat_->tag_mode();
}
// Use pthreads to prioritize a system thread.
bool WorkerThread::InitPriority() {
// This doesn't affect performance that much, and may not be too safe.
bool ret = BindToCpus(&cpu_mask_);
if (!ret)
logprintf(11, "Log: Bind to %s failed.\n",
cpuset_format(&cpu_mask_).c_str());
logprintf(11, "Log: Thread %d running on apic ID %d mask %s (%s).\n",
thread_num_, apicid(),
CurrentCpusFormat().c_str(),
cpuset_format(&cpu_mask_).c_str());
#if 0
if (priority_ == High) {
sched_param param;
param.sched_priority = 1;
// Set the priority; others are unchanged.
logprintf(0, "Log: Changing priority to SCHED_FIFO %d\n",
param.sched_priority);
if (sched_setscheduler(0, SCHED_FIFO, ¶m)) {
char buf[256];
sat_strerror(errno, buf, sizeof(buf));
logprintf(0, "Process Error: sched_setscheduler "
"failed - error %d %s\n",
errno, buf);
}
}
#endif
return true;
}
// Use pthreads to create a system thread.
int WorkerThread::SpawnThread() {
// Create the new thread.
int result = pthread_create(&thread_, NULL, thread_spawner_, this);
if (result) {
char buf[256];
sat_strerror(result, buf, sizeof(buf));
logprintf(0, "Process Error: pthread_create "
"failed - error %d %s\n", result,
buf);
status_ = false;
return false;
}
// 0 is pthreads success.
return true;
}
// Kill the worker thread with SIGINT.
bool WorkerThread::KillThread() {
return (pthread_kill(thread_, SIGINT) == 0);
}
// Block until thread has exited.
bool WorkerThread::JoinThread() {
int result = pthread_join(thread_, NULL);
if (result) {
logprintf(0, "Process Error: pthread_join failed - error %d\n", result);
status_ = false;
}
// 0 is pthreads success.
return (!result);
}
void WorkerThread::StartRoutine() {
InitPriority();
StartThreadTimer();
Work();
StopThreadTimer();
worker_status_->RemoveSelf();
}
// Thread work loop. Execute until marked finished.
bool WorkerThread::Work() {
do {
logprintf(9, "Log: ...\n");
// Sleep for 1 second.
sat_sleep(1);
} while (IsReadyToRun());
return false;
}
// Returns CPU mask of CPUs available to this process,
// Conceptually, each bit represents a logical CPU, ie:
// mask = 3 (11b): cpu0, 1
// mask = 13 (1101b): cpu0, 2, 3
bool WorkerThread::AvailableCpus(cpu_set_t *cpuset) {
CPU_ZERO(cpuset);
#ifdef HAVE_SCHED_GETAFFINITY
return sched_getaffinity(getppid(), sizeof(*cpuset), cpuset) == 0;
#else
return 0;
#endif
}
// Returns CPU mask of CPUs this thread is bound to,
// Conceptually, each bit represents a logical CPU, ie:
// mask = 3 (11b): cpu0, 1
// mask = 13 (1101b): cpu0, 2, 3
bool WorkerThread::CurrentCpus(cpu_set_t *cpuset) {
CPU_ZERO(cpuset);
#ifdef HAVE_SCHED_GETAFFINITY
return sched_getaffinity(0, sizeof(*cpuset), cpuset) == 0;
#else
return 0;
#endif
}
// Bind worker thread to specified CPU(s)
// Args:
// thread_mask: cpu_set_t representing CPUs, ie
// mask = 1 (01b): cpu0
// mask = 3 (11b): cpu0, 1
// mask = 13 (1101b): cpu0, 2, 3
//
// Returns true on success, false otherwise.
bool WorkerThread::BindToCpus(const cpu_set_t *thread_mask) {
cpu_set_t process_mask;
AvailableCpus(&process_mask);
if (cpuset_isequal(thread_mask, &process_mask))
return true;
logprintf(11, "Log: available CPU mask - %s\n",
cpuset_format(&process_mask).c_str());
if (!cpuset_issubset(thread_mask, &process_mask)) {
// Invalid cpu_mask, ie cpu not allocated to this process or doesn't exist.
logprintf(0, "Log: requested CPUs %s not a subset of available %s\n",
cpuset_format(thread_mask).c_str(),
cpuset_format(&process_mask).c_str());
return false;
}
#ifdef HAVE_SCHED_GETAFFINITY
return (sched_setaffinity(gettid(), sizeof(*thread_mask), thread_mask) == 0);
#else
return 0;
#endif
}
// A worker thread can yield itself to give up CPU until it's scheduled again.
// Returns true on success, false on error.
bool WorkerThread::YieldSelf() {
return (sched_yield() == 0);
}
// Fill this page with its pattern.
bool WorkerThread::FillPage(struct page_entry *pe) {
// Error check arguments.
if (pe == 0) {
logprintf(0, "Process Error: Fill Page entry null\n");
return 0;
}
// Mask is the bitmask of indexes used by the pattern.
// It is the pattern size -1. Size is always a power of 2.
uint64 *memwords = static_cast<uint64*>(pe->addr);
int length = sat_->page_length();
if (tag_mode_) {
// Select tag or data as appropriate.
for (int i = 0; i < length / wordsize_; i++) {
datacast_t data;
if ((i & 0x7) == 0) {
data.l64 = addr_to_tag(&memwords[i]);
} else {
data.l32.l = pe->pattern->pattern(i << 1);
data.l32.h = pe->pattern->pattern((i << 1) + 1);
}
memwords[i] = data.l64;
}
} else {
// Just fill in untagged data directly.
for (int i = 0; i < length / wordsize_; i++) {
datacast_t data;
data.l32.l = pe->pattern->pattern(i << 1);
data.l32.h = pe->pattern->pattern((i << 1) + 1);
memwords[i] = data.l64;
}
}
return 1;
}
// Tell the thread how many pages to fill.
void FillThread::SetFillPages(int64 num_pages_to_fill_init) {
num_pages_to_fill_ = num_pages_to_fill_init;
}
// Fill this page with a random pattern.
bool FillThread::FillPageRandom(struct page_entry *pe) {
// Error check arguments.
if (pe == 0) {
logprintf(0, "Process Error: Fill Page entry null\n");
return 0;
}
if ((patternlist_ == 0) || (patternlist_->Size() == 0)) {
logprintf(0, "Process Error: No data patterns available\n");
return 0;
}
// Choose a random pattern for this block.
pe->pattern = patternlist_->GetRandomPattern();
if (pe->pattern == 0) {
logprintf(0, "Process Error: Null data pattern\n");
return 0;
}
// Actually fill the page.
return FillPage(pe);
}
// Memory fill work loop. Execute until alloted pages filled.
bool FillThread::Work() {
bool result = true;
logprintf(9, "Log: Starting fill thread %d\n", thread_num_);
// We want to fill num_pages_to_fill pages, and
// stop when we've filled that many.
// We also want to capture early break
struct page_entry pe;
int64 loops = 0;
while (IsReadyToRun() && (loops < num_pages_to_fill_)) {
result = result && sat_->GetEmpty(&pe);
if (!result) {
logprintf(0, "Process Error: fill_thread failed to pop pages, "
"bailing\n");
break;
}
// Fill the page with pattern
result = result && FillPageRandom(&pe);
if (!result) break;
// Put the page back on the queue.
result = result && sat_->PutValid(&pe);
if (!result) {
logprintf(0, "Process Error: fill_thread failed to push pages, "
"bailing\n");
break;
}
loops++;
}
// Fill in thread status.
pages_copied_ = loops;
status_ = result;
logprintf(9, "Log: Completed %d: Fill thread. Status %d, %d pages filled\n",
thread_num_, status_, pages_copied_);
return result;
}
// Print error information about a data miscompare.
void WorkerThread::ProcessError(struct ErrorRecord *error,
int priority,
const char *message) {
char dimm_string[256] = "";
int apic_id = apicid();
// Determine if this is a write or read error.
os_->Flush(error->vaddr);
error->reread = *(error->vaddr);
char *good = reinterpret_cast<char*>(&(error->expected));
char *bad = reinterpret_cast<char*>(&(error->actual));
sat_assert(error->expected != error->actual);
unsigned int offset = 0;
for (offset = 0; offset < (sizeof(error->expected) - 1); offset++) {
if (good[offset] != bad[offset])
break;
}
error->vbyteaddr = reinterpret_cast<char*>(error->vaddr) + offset;
// Find physical address if possible.
error->paddr = os_->VirtualToPhysical(error->vbyteaddr);
// Pretty print DIMM mapping if available.
os_->FindDimm(error->paddr, dimm_string, sizeof(dimm_string));
// Report parseable error.
if (priority < 5) {
// Run miscompare error through diagnoser for logging and reporting.
os_->error_diagnoser_->AddMiscompareError(dimm_string,
reinterpret_cast<uint64>
(error->vaddr), 1);
logprintf(priority,
"%s: miscompare on CPU %d(0x%s) at %p(0x%llx:%s): "
"read:0x%016llx, reread:0x%016llx expected:0x%016llx\n",
message,
apic_id,
CurrentCpusFormat().c_str(),
error->vaddr,
error->paddr,
dimm_string,
error->actual,
error->reread,
error->expected);
}
// Overwrite incorrect data with correct data to prevent
// future miscompares when this data is reused.
*(error->vaddr) = error->expected;
os_->Flush(error->vaddr);
}
// Print error information about a data miscompare.
void FileThread::ProcessError(struct ErrorRecord *error,
int priority,
const char *message) {
char dimm_string[256] = "";
// Determine if this is a write or read error.
os_->Flush(error->vaddr);
error->reread = *(error->vaddr);
char *good = reinterpret_cast<char*>(&(error->expected));
char *bad = reinterpret_cast<char*>(&(error->actual));
sat_assert(error->expected != error->actual);
unsigned int offset = 0;
for (offset = 0; offset < (sizeof(error->expected) - 1); offset++) {
if (good[offset] != bad[offset])
break;
}
error->vbyteaddr = reinterpret_cast<char*>(error->vaddr) + offset;
// Find physical address if possible.
error->paddr = os_->VirtualToPhysical(error->vbyteaddr);
// Pretty print DIMM mapping if available.
os_->FindDimm(error->paddr, dimm_string, sizeof(dimm_string));
// If crc_page_ is valid, ie checking content read back from file,
// track src/dst memory addresses. Otherwise catagorize as general
// mememory miscompare for CRC checking everywhere else.
if (crc_page_ != -1) {
int miscompare_byteoffset = static_cast<char*>(error->vbyteaddr) -
static_cast<char*>(page_recs_[crc_page_].dst);
os_->error_diagnoser_->AddHDDMiscompareError(devicename_,
crc_page_,
miscompare_byteoffset,
page_recs_[crc_page_].src,
page_recs_[crc_page_].dst);
} else {
os_->error_diagnoser_->AddMiscompareError(dimm_string,
reinterpret_cast<uint64>
(error->vaddr), 1);
}
logprintf(priority,
"%s: miscompare on %s at %p(0x%llx:%s): read:0x%016llx, "
"reread:0x%016llx expected:0x%016llx\n",
message,
devicename_.c_str(),
error->vaddr,
error->paddr,
dimm_string,
error->actual,
error->reread,
error->expected);
// Overwrite incorrect data with correct data to prevent
// future miscompares when this data is reused.
*(error->vaddr) = error->expected;
os_->Flush(error->vaddr);
}
// Do a word by word result check of a region.
// Print errors on mismatches.
int WorkerThread::CheckRegion(void *addr,
class Pattern *pattern,
int64 length,
int offset,
int64 pattern_offset) {
uint64 *memblock = static_cast<uint64*>(addr);
const int kErrorLimit = 128;
int errors = 0;
int overflowerrors = 0; // Count of overflowed errors.
bool page_error = false;
string errormessage("Hardware Error");
struct ErrorRecord
recorded[kErrorLimit]; // Queued errors for later printing.
// For each word in the data region.
for (int i = 0; i < length / wordsize_; i++) {
uint64 actual = memblock[i];
uint64 expected;
// Determine the value that should be there.
datacast_t data;
int index = 2 * i + pattern_offset;
data.l32.l = pattern->pattern(index);
data.l32.h = pattern->pattern(index + 1);
expected = data.l64;
// Check tags if necessary.
if (tag_mode_ && ((reinterpret_cast<uint64>(&memblock[i]) & 0x3f) == 0)) {
expected = addr_to_tag(&memblock[i]);
}
// If the value is incorrect, save an error record for later printing.
if (actual != expected) {
if (errors < kErrorLimit) {
recorded[errors].actual = actual;
recorded[errors].expected = expected;
recorded[errors].vaddr = &memblock[i];
errors++;
} else {
page_error = true;
// If we have overflowed the error queue, just print the errors now.
logprintf(10, "Log: Error record overflow, too many miscompares!\n");
errormessage = "Page Error";
break;
}
}
}
// Find if this is a whole block corruption.
if (page_error && !tag_mode_) {
int patsize = patternlist_->Size();
for (int pat = 0; pat < patsize; pat++) {
class Pattern *altpattern = patternlist_->GetPattern(pat);
const int kGood = 0;
const int kBad = 1;
const int kGoodAgain = 2;
const int kNoMatch = 3;
int state = kGood;
unsigned int badstart = 0;
unsigned int badend = 0;
// Don't match against ourself!
if (pattern == altpattern)
continue;
for (int i = 0; i < length / wordsize_; i++) {
uint64 actual = memblock[i];
datacast_t expected;
datacast_t possible;
// Determine the value that should be there.
int index = 2 * i + pattern_offset;
expected.l32.l = pattern->pattern(index);
expected.l32.h = pattern->pattern(index + 1);
possible.l32.l = pattern->pattern(index);
possible.l32.h = pattern->pattern(index + 1);
if (state == kGood) {
if (actual == expected.l64) {
continue;
} else if (actual == possible.l64) {
badstart = i;
badend = i;
state = kBad;
continue;
} else {
state = kNoMatch;
break;
}
} else if (state == kBad) {
if (actual == possible.l64) {
badend = i;
continue;
} else if (actual == expected.l64) {
state = kGoodAgain;
continue;
} else {
state = kNoMatch;
break;
}
} else if (state == kGoodAgain) {
if (actual == expected.l64) {
continue;
} else {
state = kNoMatch;
break;
}
}
}
if ((state == kGoodAgain) || (state == kBad)) {
unsigned int blockerrors = badend - badstart + 1;
errormessage = "Block Error";
ProcessError(&recorded[0], 0, errormessage.c_str());
logprintf(0, "Block Error: (%p) pattern %s instead of %s, "
"%d bytes from offset 0x%x to 0x%x\n",
&memblock[badstart],
altpattern->name(), pattern->name(),
blockerrors * wordsize_,
offset + badstart * wordsize_,
offset + badend * wordsize_);
errorcount_ += blockerrors;
return blockerrors;
}
}
}
// Process error queue after all errors have been recorded.
for (int err = 0; err < errors; err++) {
int priority = 5;
if (errorcount_ + err < 30)
priority = 0; // Bump up the priority for the first few errors.
ProcessError(&recorded[err], priority, errormessage.c_str());
}
if (page_error) {
// For each word in the data region.
int error_recount = 0;
for (int i = 0; i < length / wordsize_; i++) {
uint64 actual = memblock[i];
uint64 expected;
datacast_t data;
// Determine the value that should be there.
int index = 2 * i + pattern_offset;
data.l32.l = pattern->pattern(index);
data.l32.h = pattern->pattern(index + 1);
expected = data.l64;
// Check tags if necessary.
if (tag_mode_ && ((reinterpret_cast<uint64>(&memblock[i]) & 0x3f) == 0)) {
expected = addr_to_tag(&memblock[i]);
}
// If the value is incorrect, save an error record for later printing.
if (actual != expected) {
if (error_recount < kErrorLimit) {
// We already reported these.
error_recount++;
} else {
// If we have overflowed the error queue, print the errors now.
struct ErrorRecord er;
er.actual = actual;
er.expected = expected;
er.vaddr = &memblock[i];
// Do the error printout. This will take a long time and
// likely change the machine state.
ProcessError(&er, 12, errormessage.c_str());
overflowerrors++;
}
}
}
}
// Keep track of observed errors.
errorcount_ += errors + overflowerrors;
return errors + overflowerrors;
}
float WorkerThread::GetCopiedData() {
return pages_copied_ * sat_->page_length() / kMegabyte;
}
// Calculate the CRC of a region.
// Result check if the CRC mismatches.
int WorkerThread::CrcCheckPage(struct page_entry *srcpe) {
const int blocksize = 4096;
const int blockwords = blocksize / wordsize_;
int errors = 0;
const AdlerChecksum *expectedcrc = srcpe->pattern->crc();
uint64 *memblock = static_cast<uint64*>(srcpe->addr);
int blocks = sat_->page_length() / blocksize;
for (int currentblock = 0; currentblock < blocks; currentblock++) {
uint64 *memslice = memblock + currentblock * blockwords;
AdlerChecksum crc;
if (tag_mode_) {
AdlerAddrCrcC(memslice, blocksize, &crc, srcpe);
} else {
CalculateAdlerChecksum(memslice, blocksize, &crc);
}
// If the CRC does not match, we'd better look closer.
if (!crc.Equals(*expectedcrc)) {
logprintf(11, "Log: CrcCheckPage Falling through to slow compare, "
"CRC mismatch %s != %s\n",
crc.ToHexString().c_str(),
expectedcrc->ToHexString().c_str());
int errorcount = CheckRegion(memslice,
srcpe->pattern,
blocksize,
currentblock * blocksize, 0);
if (errorcount == 0) {
logprintf(0, "Log: CrcCheckPage CRC mismatch %s != %s, "
"but no miscompares found.\n",
crc.ToHexString().c_str(),
expectedcrc->ToHexString().c_str());
}
errors += errorcount;
}
}
// For odd length transfers, we should never hit this.
int leftovers = sat_->page_length() % blocksize;
if (leftovers) {
uint64 *memslice = memblock + blocks * blockwords;
errors += CheckRegion(memslice,
srcpe->pattern,
leftovers,
blocks * blocksize, 0);
}
return errors;
}
// Print error information about a data miscompare.
void WorkerThread::ProcessTagError(struct ErrorRecord *error,
int priority,
const char *message) {
char dimm_string[256] = "";
char tag_dimm_string[256] = "";
bool read_error = false;
int apic_id = apicid();
// Determine if this is a write or read error.
os_->Flush(error->vaddr);
error->reread = *(error->vaddr);
// Distinguish read and write errors.
if (error->actual != error->reread) {
read_error = true;
}
sat_assert(error->expected != error->actual);
error->vbyteaddr = reinterpret_cast<char*>(error->vaddr);
// Find physical address if possible.
error->paddr = os_->VirtualToPhysical(error->vbyteaddr);
error->tagpaddr = os_->VirtualToPhysical(error->tagvaddr);
// Pretty print DIMM mapping if available.
os_->FindDimm(error->paddr, dimm_string, sizeof(dimm_string));
// Pretty print DIMM mapping if available.
os_->FindDimm(error->tagpaddr, tag_dimm_string, sizeof(tag_dimm_string));
// Report parseable error.
if (priority < 5) {
logprintf(priority,
"%s: Tag from %p(0x%llx:%s) (%s) "
"miscompare on CPU %d(0x%s) at %p(0x%llx:%s): "
"read:0x%016llx, reread:0x%016llx expected:0x%016llx\n",
message,
error->tagvaddr, error->tagpaddr,
tag_dimm_string,
read_error ? "read error" : "write error",
apic_id,
CurrentCpusFormat().c_str(),
error->vaddr,
error->paddr,
dimm_string,
error->actual,
error->reread,
error->expected);
}
errorcount_ += 1;
// Overwrite incorrect data with correct data to prevent
// future miscompares when this data is reused.
*(error->vaddr) = error->expected;
os_->Flush(error->vaddr);
}
// Print out and log a tag error.
bool WorkerThread::ReportTagError(
uint64 *mem64,
uint64 actual,
uint64 tag) {
struct ErrorRecord er;
er.actual = actual;
er.expected = tag;
er.vaddr = mem64;
// Generate vaddr from tag.
er.tagvaddr = reinterpret_cast<uint64*>(actual);
ProcessTagError(&er, 0, "Hardware Error");
return true;
}
// C implementation of Adler memory copy, with memory tagging.
bool WorkerThread::AdlerAddrMemcpyC(uint64 *dstmem64,
uint64 *srcmem64,
unsigned int size_in_bytes,
AdlerChecksum *checksum,
struct page_entry *pe) {
// Use this data wrapper to access memory with 64bit read/write.
datacast_t data;
datacast_t dstdata;
unsigned int count = size_in_bytes / sizeof(data);
if (count > ((1U) << 19)) {
// Size is too large, must be strictly less than 512 KB.
return false;
}
uint64 a1 = 1;
uint64 a2 = 1;
uint64 b1 = 0;
uint64 b2 = 0;
class Pattern *pattern = pe->pattern;
unsigned int i = 0;
while (i < count) {
// Process 64 bits at a time.
if ((i & 0x7) == 0) {
data.l64 = srcmem64[i];
dstdata.l64 = dstmem64[i];
uint64 src_tag = addr_to_tag(&srcmem64[i]);
uint64 dst_tag = addr_to_tag(&dstmem64[i]);
// Detect if tags have been corrupted.
if (data.l64 != src_tag)
ReportTagError(&srcmem64[i], data.l64, src_tag);
if (dstdata.l64 != dst_tag)
ReportTagError(&dstmem64[i], dstdata.l64, dst_tag);
data.l32.l = pattern->pattern(i << 1);
data.l32.h = pattern->pattern((i << 1) + 1);
a1 = a1 + data.l32.l;
b1 = b1 + a1;
a1 = a1 + data.l32.h;
b1 = b1 + a1;
data.l64 = dst_tag;
dstmem64[i] = data.l64;
} else {
data.l64 = srcmem64[i];
a1 = a1 + data.l32.l;
b1 = b1 + a1;
a1 = a1 + data.l32.h;
b1 = b1 + a1;
dstmem64[i] = data.l64;
}
i++;
data.l64 = srcmem64[i];
a2 = a2 + data.l32.l;
b2 = b2 + a2;
a2 = a2 + data.l32.h;
b2 = b2 + a2;
dstmem64[i] = data.l64;
i++;
}
checksum->Set(a1, a2, b1, b2);
return true;
}
// x86_64 SSE2 assembly implementation of Adler memory copy, with address
// tagging added as a second step. This is useful for debugging failures
// that only occur when SSE / nontemporal writes are used.
bool WorkerThread::AdlerAddrMemcpyWarm(uint64 *dstmem64,
uint64 *srcmem64,
unsigned int size_in_bytes,
AdlerChecksum *checksum,
struct page_entry *pe) {
// Do ASM copy, ignore checksum.
AdlerChecksum ignored_checksum;
os_->AdlerMemcpyWarm(dstmem64, srcmem64, size_in_bytes, &ignored_checksum);
// Force cache flush.
int length = size_in_bytes / sizeof(*dstmem64);
for (int i = 0; i < length; i += sizeof(*dstmem64)) {
os_->FastFlush(dstmem64 + i);
os_->FastFlush(srcmem64 + i);
}
// Check results.
AdlerAddrCrcC(srcmem64, size_in_bytes, checksum, pe);
// Patch up address tags.
TagAddrC(dstmem64, size_in_bytes);
return true;
}
// Retag pages..
bool WorkerThread::TagAddrC(uint64 *memwords,
unsigned int size_in_bytes) {
// Mask is the bitmask of indexes used by the pattern.
// It is the pattern size -1. Size is always a power of 2.
// Select tag or data as appropriate.
int length = size_in_bytes / wordsize_;
for (int i = 0; i < length; i += 8) {
datacast_t data;
data.l64 = addr_to_tag(&memwords[i]);
memwords[i] = data.l64;
}
return true;
}
// C implementation of Adler memory crc.
bool WorkerThread::AdlerAddrCrcC(uint64 *srcmem64,
unsigned int size_in_bytes,
AdlerChecksum *checksum,
struct page_entry *pe) {
// Use this data wrapper to access memory with 64bit read/write.
datacast_t data;
unsigned int count = size_in_bytes / sizeof(data);
if (count > ((1U) << 19)) {
// Size is too large, must be strictly less than 512 KB.
return false;
}
uint64 a1 = 1;
uint64 a2 = 1;
uint64 b1 = 0;
uint64 b2 = 0;
class Pattern *pattern = pe->pattern;
unsigned int i = 0;
while (i < count) {
// Process 64 bits at a time.
if ((i & 0x7) == 0) {
data.l64 = srcmem64[i];
uint64 src_tag = addr_to_tag(&srcmem64[i]);
// Check that tags match expected.
if (data.l64 != src_tag)
ReportTagError(&srcmem64[i], data.l64, src_tag);
data.l32.l = pattern->pattern(i << 1);
data.l32.h = pattern->pattern((i << 1) + 1);
a1 = a1 + data.l32.l;
b1 = b1 + a1;
a1 = a1 + data.l32.h;
b1 = b1 + a1;
} else {
data.l64 = srcmem64[i];
a1 = a1 + data.l32.l;
b1 = b1 + a1;
a1 = a1 + data.l32.h;
b1 = b1 + a1;
}
i++;
data.l64 = srcmem64[i];
a2 = a2 + data.l32.l;
b2 = b2 + a2;
a2 = a2 + data.l32.h;
b2 = b2 + a2;
i++;
}
checksum->Set(a1, a2, b1, b2);
return true;
}
// Copy a block of memory quickly, while keeping a CRC of the data.
// Result check if the CRC mismatches.
int WorkerThread::CrcCopyPage(struct page_entry *dstpe,
struct page_entry *srcpe) {
int errors = 0;
const int blocksize = 4096;
const int blockwords = blocksize / wordsize_;
int blocks = sat_->page_length() / blocksize;
// Base addresses for memory copy
uint64 *targetmembase = static_cast<uint64*>(dstpe->addr);
uint64 *sourcemembase = static_cast<uint64*>(srcpe->addr);
// Remember the expected CRC
const AdlerChecksum *expectedcrc = srcpe->pattern->crc();
for (int currentblock = 0; currentblock < blocks; currentblock++) {
uint64 *targetmem = targetmembase + currentblock * blockwords;
uint64 *sourcemem = sourcemembase + currentblock * blockwords;
AdlerChecksum crc;
if (tag_mode_) {
AdlerAddrMemcpyC(targetmem, sourcemem, blocksize, &crc, srcpe);
} else {
AdlerMemcpyC(targetmem, sourcemem, blocksize, &crc);
}
// Investigate miscompares.
if (!crc.Equals(*expectedcrc)) {
logprintf(11, "Log: CrcCopyPage Falling through to slow compare, "
"CRC mismatch %s != %s\n", crc.ToHexString().c_str(),
expectedcrc->ToHexString().c_str());
int errorcount = CheckRegion(sourcemem,
srcpe->pattern,
blocksize,
currentblock * blocksize, 0);
if (errorcount == 0) {
logprintf(0, "Log: CrcCopyPage CRC mismatch %s != %s, "
"but no miscompares found. Retrying with fresh data.\n",
crc.ToHexString().c_str(),
expectedcrc->ToHexString().c_str());
if (!tag_mode_) {
// Copy the data originally read from this region back again.
// This data should have any corruption read originally while
// calculating the CRC.
memcpy(sourcemem, targetmem, blocksize);
errorcount = CheckRegion(sourcemem,
srcpe->pattern,
blocksize,
currentblock * blocksize, 0);
if (errorcount == 0) {
int apic_id = apicid();
logprintf(0, "Process Error: CPU %d(0x%s) CrcCopyPage "
"CRC mismatch %s != %s, "
"but no miscompares found on second pass.\n",
apic_id, CurrentCpusFormat().c_str(),
crc.ToHexString().c_str(),
expectedcrc->ToHexString().c_str());
struct ErrorRecord er;
er.actual = sourcemem[0];
er.expected = 0x0;
er.vaddr = sourcemem;
ProcessError(&er, 0, "Hardware Error");
}
}
}
errors += errorcount;
}
}
// For odd length transfers, we should never hit this.
int leftovers = sat_->page_length() % blocksize;
if (leftovers) {
uint64 *targetmem = targetmembase + blocks * blockwords;
uint64 *sourcemem = sourcemembase + blocks * blockwords;
errors += CheckRegion(sourcemem,
srcpe->pattern,
leftovers,
blocks * blocksize, 0);
int leftoverwords = leftovers / wordsize_;
for (int i = 0; i < leftoverwords; i++) {
targetmem[i] = sourcemem[i];
}
}
// Update pattern reference to reflect new contents.
dstpe->pattern = srcpe->pattern;
// Clean clean clean the errors away.
if (errors) {
// TODO(nsanders): Maybe we should patch rather than fill? Filling may
// cause bad data to be propogated across the page.
FillPage(dstpe);
}
return errors;
}
// Invert a block of memory quickly, traversing downwards.
int InvertThread::InvertPageDown(struct page_entry *srcpe) {
const int blocksize = 4096;
const int blockwords = blocksize / wordsize_;
int blocks = sat_->page_length() / blocksize;
// Base addresses for memory copy
unsigned int *sourcemembase = static_cast<unsigned int *>(srcpe->addr);
for (int currentblock = blocks-1; currentblock >= 0; currentblock--) {
unsigned int *sourcemem = sourcemembase + currentblock * blockwords;
for (int i = blockwords - 32; i >= 0; i -= 32) {
for (int index = i + 31; index >= i; --index) {
unsigned int actual = sourcemem[index];
sourcemem[index] = ~actual;
}
OsLayer::FastFlush(&sourcemem[i]);
}
}
return 0;
}
// Invert a block of memory, traversing upwards.
int InvertThread::InvertPageUp(struct page_entry *srcpe) {
const int blocksize = 4096;
const int blockwords = blocksize / wordsize_;
int blocks = sat_->page_length() / blocksize;
// Base addresses for memory copy
unsigned int *sourcemembase = static_cast<unsigned int *>(srcpe->addr);
for (int currentblock = 0; currentblock < blocks; currentblock++) {
unsigned int *sourcemem = sourcemembase + currentblock * blockwords;
for (int i = 0; i < blockwords; i += 32) {
for (int index = i; index <= i + 31; ++index) {
unsigned int actual = sourcemem[index];
sourcemem[index] = ~actual;
}
OsLayer::FastFlush(&sourcemem[i]);
}
}
return 0;
}
// Copy a block of memory quickly, while keeping a CRC of the data.
// Result check if the CRC mismatches. Warm the CPU while running
int WorkerThread::CrcWarmCopyPage(struct page_entry *dstpe,
struct page_entry *srcpe) {
int errors = 0;
const int blocksize = 4096;
const int blockwords = blocksize / wordsize_;
int blocks = sat_->page_length() / blocksize;
// Base addresses for memory copy
uint64 *targetmembase = static_cast<uint64*>(dstpe->addr);
uint64 *sourcemembase = static_cast<uint64*>(srcpe->addr);
// Remember the expected CRC
const AdlerChecksum *expectedcrc = srcpe->pattern->crc();
for (int currentblock = 0; currentblock < blocks; currentblock++) {
uint64 *targetmem = targetmembase + currentblock * blockwords;
uint64 *sourcemem = sourcemembase + currentblock * blockwords;
AdlerChecksum crc;
if (tag_mode_) {
AdlerAddrMemcpyWarm(targetmem, sourcemem, blocksize, &crc, srcpe);
} else {
os_->AdlerMemcpyWarm(targetmem, sourcemem, blocksize, &crc);
}
// Investigate miscompares.
if (!crc.Equals(*expectedcrc)) {
logprintf(11, "Log: CrcWarmCopyPage Falling through to slow compare, "
"CRC mismatch %s != %s\n", crc.ToHexString().c_str(),
expectedcrc->ToHexString().c_str());
int errorcount = CheckRegion(sourcemem,
srcpe->pattern,
blocksize,
currentblock * blocksize, 0);
if (errorcount == 0) {
logprintf(0, "Log: CrcWarmCopyPage CRC mismatch %s != %s, "
"but no miscompares found. Retrying with fresh data.\n",
crc.ToHexString().c_str(),
expectedcrc->ToHexString().c_str());
if (!tag_mode_) {
// Copy the data originally read from this region back again.
// This data should have any corruption read originally while
// calculating the CRC.
memcpy(sourcemem, targetmem, blocksize);
errorcount = CheckRegion(sourcemem,
srcpe->pattern,
blocksize,
currentblock * blocksize, 0);
if (errorcount == 0) {
int apic_id = apicid();
logprintf(0, "Process Error: CPU %d(0x%s) CrciWarmCopyPage "
"CRC mismatch %s != %s, "
"but no miscompares found on second pass.\n",
apic_id, CurrentCpusFormat().c_str(),
crc.ToHexString().c_str(),
expectedcrc->ToHexString().c_str());
struct ErrorRecord er;
er.actual = sourcemem[0];
er.expected = 0x0;
er.vaddr = sourcemem;
ProcessError(&er, 0, "Hardware Error");
}
}
}
errors += errorcount;
}
}
// For odd length transfers, we should never hit this.
int leftovers = sat_->page_length() % blocksize;
if (leftovers) {
uint64 *targetmem = targetmembase + blocks * blockwords;
uint64 *sourcemem = sourcemembase + blocks * blockwords;
errors += CheckRegion(sourcemem,
srcpe->pattern,
leftovers,
blocks * blocksize, 0);
int leftoverwords = leftovers / wordsize_;
for (int i = 0; i < leftoverwords; i++) {
targetmem[i] = sourcemem[i];
}
}
// Update pattern reference to reflect new contents.
dstpe->pattern = srcpe->pattern;
// Clean clean clean the errors away.
if (errors) {
// TODO(nsanders): Maybe we should patch rather than fill? Filling may
// cause bad data to be propogated across the page.
FillPage(dstpe);
}
return errors;
}
// Memory check work loop. Execute until done, then exhaust pages.
bool CheckThread::Work() {
struct page_entry pe;
bool result = true;
int64 loops = 0;
logprintf(9, "Log: Starting Check thread %d\n", thread_num_);
// We want to check all the pages, and
// stop when there aren't any left.
while (true) {
result = result && sat_->GetValid(&pe);
if (!result) {
if (IsReadyToRunNoPause())
logprintf(0, "Process Error: check_thread failed to pop pages, "
"bailing\n");
else
result = true;
break;
}
// Do the result check.
CrcCheckPage(&pe);
// Push pages back on the valid queue if we are still going,
// throw them out otherwise.
if (IsReadyToRunNoPause())
result = result && sat_->PutValid(&pe);
else
result = result && sat_->PutEmpty(&pe);
if (!result) {
logprintf(0, "Process Error: check_thread failed to push pages, "
"bailing\n");
break;
}
loops++;
}
pages_copied_ = loops;
status_ = result;
logprintf(9, "Log: Completed %d: Check thread. Status %d, %d pages checked\n",
thread_num_, status_, pages_copied_);
return result;
}
// Memory copy work loop. Execute until marked done.
bool CopyThread::Work() {
struct page_entry src;
struct page_entry dst;
bool result = true;
int64 loops = 0;
logprintf(9, "Log: Starting copy thread %d: cpu %s, mem %x\n",
thread_num_, cpuset_format(&cpu_mask_).c_str(), tag_);
while (IsReadyToRun()) {
// Pop the needed pages.
result = result && sat_->GetValid(&src, tag_);
result = result && sat_->GetEmpty(&dst, tag_);
if (!result) {
logprintf(0, "Process Error: copy_thread failed to pop pages, "
"bailing\n");
break;
}
// Force errors for unittests.
if (sat_->error_injection()) {
if (loops == 8) {
char *addr = reinterpret_cast<char*>(src.addr);
int offset = random() % sat_->page_length();
addr[offset] = 0xba;
}
}
// We can use memcpy, or CRC check while we copy.
if (sat_->warm()) {
CrcWarmCopyPage(&dst, &src);
} else if (sat_->strict()) {
CrcCopyPage(&dst, &src);
} else {
memcpy(dst.addr, src.addr, sat_->page_length());
dst.pattern = src.pattern;
}
result = result && sat_->PutValid(&dst);
result = result && sat_->PutEmpty(&src);
// Copy worker-threads yield themselves at the end of each copy loop,
// to avoid threads from preempting each other in the middle of the inner
// copy-loop. Cooperations between Copy worker-threads results in less
// unnecessary cache thrashing (which happens when context-switching in the
// middle of the inner copy-loop).
YieldSelf();
if (!result) {
logprintf(0, "Process Error: copy_thread failed to push pages, "
"bailing\n");
break;
}
loops++;
}
pages_copied_ = loops;
status_ = result;
logprintf(9, "Log: Completed %d: Copy thread. Status %d, %d pages copied\n",
thread_num_, status_, pages_copied_);
return result;
}
// Memory invert work loop. Execute until marked done.
bool InvertThread::Work() {
struct page_entry src;
bool result = true;
int64 loops = 0;
logprintf(9, "Log: Starting invert thread %d\n", thread_num_);
while (IsReadyToRun()) {
// Pop the needed pages.
result = result && sat_->GetValid(&src);
if (!result) {
logprintf(0, "Process Error: invert_thread failed to pop pages, "
"bailing\n");
break;
}
if (sat_->strict())
CrcCheckPage(&src);
// For the same reason CopyThread yields itself (see YieldSelf comment
// in CopyThread::Work(), InvertThread yields itself after each invert
// operation to improve cooperation between different worker threads
// stressing the memory/cache.
InvertPageUp(&src);
YieldSelf();
InvertPageDown(&src);
YieldSelf();
InvertPageDown(&src);
YieldSelf();
InvertPageUp(&src);
YieldSelf();
if (sat_->strict())
CrcCheckPage(&src);
result = result && sat_->PutValid(&src);
if (!result) {
logprintf(0, "Process Error: invert_thread failed to push pages, "
"bailing\n");
break;
}
loops++;
}
pages_copied_ = loops * 2;
status_ = result;
logprintf(9, "Log: Completed %d: Copy thread. Status %d, %d pages copied\n",
thread_num_, status_, pages_copied_);
return result;
}
// Set file name to use for File IO.
void FileThread::SetFile(const char *filename_init) {
filename_ = filename_init;
devicename_ = os_->FindFileDevice(filename_);
}
// Open the file for access.
bool FileThread::OpenFile(int *pfile) {
bool no_O_DIRECT = false;
int flags = O_RDWR | O_CREAT | O_SYNC;
int fd = open(filename_.c_str(), flags | O_DIRECT, 0644);
if (O_DIRECT != 0 && fd < 0 && errno == EINVAL) {
no_O_DIRECT = true;
fd = open(filename_.c_str(), flags, 0644); // Try without O_DIRECT
}
if (fd < 0) {
logprintf(0, "Process Error: Failed to create file %s!!\n",
filename_.c_str());
pages_copied_ = 0;
return false;
}
if (no_O_DIRECT)
os_->ActivateFlushPageCache(); // Not using O_DIRECT fixed EINVAL
*pfile = fd;
return true;
}
// Close the file.
bool FileThread::CloseFile(int fd) {
close(fd);
return true;
}
// Check sector tagging.
bool FileThread::SectorTagPage(struct page_entry *src, int block) {
int page_length = sat_->page_length();
struct FileThread::SectorTag *tag =
(struct FileThread::SectorTag *)(src->addr);
// Tag each sector.
unsigned char magic = ((0xba + thread_num_) & 0xff);
for (int sec = 0; sec < page_length / 512; sec++) {
tag[sec].magic = magic;
tag[sec].block = block & 0xff;
tag[sec].sector = sec & 0xff;
tag[sec].pass = pass_ & 0xff;
}
return true;
}
bool FileThread::WritePageToFile(int fd, struct page_entry *src) {
int page_length = sat_->page_length();
// Fill the file with our data.
int64 size = write(fd, src->addr, page_length);
if (size != page_length) {
os_->ErrorReport(devicename_.c_str(), "write-error", 1);
errorcount_++;
logprintf(0, "Block Error: file_thread failed to write, "
"bailing\n");
return false;
}
return true;
}
// Write the data to the file.
bool FileThread::WritePages(int fd) {
int strict = sat_->strict();
// Start fresh at beginning of file for each batch of pages.
lseek64(fd, 0, SEEK_SET);
for (int i = 0; i < sat_->disk_pages(); i++) {
struct page_entry src;
if (!GetValidPage(&src))
return false;
// Save expected pattern.
page_recs_[i].pattern = src.pattern;
page_recs_[i].src = src.addr;
// Check data correctness.
if (strict)
CrcCheckPage(&src);
SectorTagPage(&src, i);
bool result = WritePageToFile(fd, &src);
if (!PutEmptyPage(&src))
return false;
if (!result)
return false;
}
return os_->FlushPageCache(); // If O_DIRECT worked, this will be a NOP.
}
// Copy data from file into memory block.
bool FileThread::ReadPageFromFile(int fd, struct page_entry *dst) {
int page_length = sat_->page_length();
// Do the actual read.
int64 size = read(fd, dst->addr, page_length);
if (size != page_length) {
os_->ErrorReport(devicename_.c_str(), "read-error", 1);
logprintf(0, "Block Error: file_thread failed to read, "
"bailing\n");
errorcount_++;
return false;
}
return true;
}
// Check sector tagging.
bool FileThread::SectorValidatePage(const struct PageRec &page,
struct page_entry *dst, int block) {
// Error injection.
static int calls = 0;
calls++;
// Do sector tag compare.
int firstsector = -1;
int lastsector = -1;
bool badsector = false;
int page_length = sat_->page_length();
// Cast data block into an array of tagged sectors.
struct FileThread::SectorTag *tag =
(struct FileThread::SectorTag *)(dst->addr);
sat_assert(sizeof(*tag) == 512);
// Error injection.
if (sat_->error_injection()) {
if (calls == 2) {
for (int badsec = 8; badsec < 17; badsec++)
tag[badsec].pass = 27;
}
if (calls == 18) {
(static_cast<int32*>(dst->addr))[27] = 0xbadda7a;
}
}
// Check each sector for the correct tag we added earlier,
// then revert the tag to the to normal data pattern.
unsigned char magic = ((0xba + thread_num_) & 0xff);
for (int sec = 0; sec < page_length / 512; sec++) {
// Check magic tag.
if ((tag[sec].magic != magic) ||
(tag[sec].block != (block & 0xff)) ||
(tag[sec].sector != (sec & 0xff)) ||
(tag[sec].pass != (pass_ & 0xff))) {
// Offset calculation for tag location.
int offset = sec * sizeof(SectorTag);
if (tag[sec].block != (block & 0xff))
offset += 1 * sizeof(uint8);
else if (tag[sec].sector != (sec & 0xff))
offset += 2 * sizeof(uint8);
else if (tag[sec].pass != (pass_ & 0xff))
offset += 3 * sizeof(uint8);
// Run sector tag error through diagnoser for logging and reporting.
errorcount_ += 1;
os_->error_diagnoser_->AddHDDSectorTagError(devicename_, tag[sec].block,
offset,
tag[sec].sector,
page.src, page.dst);
logprintf(5, "Sector Error: Sector tag @ 0x%x, pass %d/%d. "
"sec %x/%x, block %d/%d, magic %x/%x, File: %s \n",
block * page_length + 512 * sec,
(pass_ & 0xff), (unsigned int)tag[sec].pass,
sec, (unsigned int)tag[sec].sector,
block, (unsigned int)tag[sec].block,
magic, (unsigned int)tag[sec].magic,
filename_.c_str());
// Keep track of first and last bad sector.
if (firstsector == -1)
firstsector = (block * page_length / 512) + sec;
lastsector = (block * page_length / 512) + sec;
badsector = true;
}
// Patch tag back to proper pattern.
unsigned int *addr = (unsigned int *)(&tag[sec]);
*addr = dst->pattern->pattern(512 * sec / sizeof(*addr));
}
// If we found sector errors:
if (badsector == true) {
logprintf(5, "Log: file sector miscompare at offset %x-%x. File: %s\n",
firstsector * 512,
((lastsector + 1) * 512) - 1,
filename_.c_str());
// Either exit immediately, or patch the data up and continue.
if (sat_->stop_on_error()) {
exit(1);
} else {
// Patch up bad pages.
for (int block = (firstsector * 512) / page_length;
block <= (lastsector * 512) / page_length;
block++) {
unsigned int *memblock = static_cast<unsigned int *>(dst->addr);
int length = page_length / wordsize_;
for (int i = 0; i < length; i++) {
memblock[i] = dst->pattern->pattern(i);
}
}
}
}
return true;
}
// Get memory for an incoming data transfer..
bool FileThread::PagePrepare() {
// We can only do direct IO to SAT pages if it is normal mem.
page_io_ = os_->normal_mem();
// Init a local buffer if we need it.
if (!page_io_) {
#ifdef HAVE_POSIX_MEMALIGN
int result = posix_memalign(&local_page_, 512, sat_->page_length());
#else
local_page_ = memalign(512, sat_->page_length());
int result = (local_page_ == 0);
#endif
if (result) {
logprintf(0, "Process Error: disk thread posix_memalign "
"returned %d (fail)\n",
result);
status_ = false;
return false;
}
}
return true;
}
// Remove memory allocated for data transfer.
bool FileThread::PageTeardown() {
// Free a local buffer if we need to.
if (!page_io_) {
free(local_page_);
}
return true;
}
// Get memory for an incoming data transfer..
bool FileThread::GetEmptyPage(struct page_entry *dst) {
if (page_io_) {
if (!sat_->GetEmpty(dst))
return false;
} else {
dst->addr = local_page_;
dst->offset = 0;
dst->pattern = 0;
}
return true;
}
// Get memory for an outgoing data transfer..
bool FileThread::GetValidPage(struct page_entry *src) {
struct page_entry tmp;
if (!sat_->GetValid(&tmp))
return false;
if (page_io_) {
*src = tmp;
return true;
} else {
src->addr = local_page_;
src->offset = 0;
CrcCopyPage(src, &tmp);
if (!sat_->PutValid(&tmp))
return false;
}
return true;
}
// Throw out a used empty page.
bool FileThread::PutEmptyPage(struct page_entry *src) {
if (page_io_) {
if (!sat_->PutEmpty(src))
return false;
}
return true;
}
// Throw out a used, filled page.
bool FileThread::PutValidPage(struct page_entry *src) {
if (page_io_) {
if (!sat_->PutValid(src))
return false;
}
return true;
}
// Copy data from file into memory blocks.
bool FileThread::ReadPages(int fd) {
int page_length = sat_->page_length();
int strict = sat_->strict();
bool result = true;
// Read our data back out of the file, into it's new location.
lseek64(fd, 0, SEEK_SET);
for (int i = 0; i < sat_->disk_pages(); i++) {
struct page_entry dst;
if (!GetEmptyPage(&dst))
return false;
// Retrieve expected pattern.
dst.pattern = page_recs_[i].pattern;
// Update page recordpage record.
page_recs_[i].dst = dst.addr;
// Read from the file into destination page.
if (!ReadPageFromFile(fd, &dst)) {
PutEmptyPage(&dst);
return false;
}
SectorValidatePage(page_recs_[i], &dst, i);
// Ensure that the transfer ended up with correct data.
if (strict) {
// Record page index currently CRC checked.
crc_page_ = i;
int errors = CrcCheckPage(&dst);
if (errors) {
logprintf(5, "Log: file miscompare at block %d, "
"offset %x-%x. File: %s\n",
i, i * page_length, ((i + 1) * page_length) - 1,
filename_.c_str());
result = false;
}
crc_page_ = -1;
errorcount_ += errors;
}
if (!PutValidPage(&dst))
return false;
}
return result;
}
// File IO work loop. Execute until marked done.
bool FileThread::Work() {
bool result = true;
int64 loops = 0;
logprintf(9, "Log: Starting file thread %d, file %s, device %s\n",
thread_num_,
filename_.c_str(),
devicename_.c_str());
if (!PagePrepare()) {
status_ = false;
return false;
}
// Open the data IO file.
int fd = 0;
if (!OpenFile(&fd)) {
status_ = false;
return false;
}
pass_ = 0;
// Load patterns into page records.
page_recs_ = new struct PageRec[sat_->disk_pages()];
for (int i = 0; i < sat_->disk_pages(); i++) {
page_recs_[i].pattern = new struct Pattern();
}
// Loop until done.
while (IsReadyToRun()) {
// Do the file write.
if (!(result = result && WritePages(fd)))
break;
// Do the file read.
if (!(result = result && ReadPages(fd)))
break;
loops++;
pass_ = loops;
}
pages_copied_ = loops * sat_->disk_pages();
// Clean up.
CloseFile(fd);
PageTeardown();
logprintf(9, "Log: Completed %d: file thread status %d, %d pages copied\n",
thread_num_, status_, pages_copied_);
// Failure to read from device indicates hardware,
// rather than procedural SW error.
status_ = true;
return true;
}
bool NetworkThread::IsNetworkStopSet() {
return !IsReadyToRunNoPause();
}
bool NetworkSlaveThread::IsNetworkStopSet() {
// This thread has no completion status.
// It finishes whever there is no more data to be
// passed back.
return true;
}
// Set ip name to use for Network IO.
void NetworkThread::SetIP(const char *ipaddr_init) {
strncpy(ipaddr_, ipaddr_init, 256);
}
// Create a socket.
// Return 0 on error.
bool NetworkThread::CreateSocket(int *psocket) {
int sock = socket(AF_INET, SOCK_STREAM, 0);
if (sock == -1) {
logprintf(0, "Process Error: Cannot open socket\n");
pages_copied_ = 0;
status_ = false;
return false;
}
*psocket = sock;
return true;
}
// Close the socket.
bool NetworkThread::CloseSocket(int sock) {
close(sock);
return true;
}
// Initiate the tcp connection.
bool NetworkThread::Connect(int sock) {
struct sockaddr_in dest_addr;
dest_addr.sin_family = AF_INET;
dest_addr.sin_port = htons(kNetworkPort);
memset(&(dest_addr.sin_zero), '\0', sizeof(dest_addr.sin_zero));
// Translate dot notation to u32.
if (inet_aton(ipaddr_, &dest_addr.sin_addr) == 0) {
logprintf(0, "Process Error: Cannot resolve %s\n", ipaddr_);
pages_copied_ = 0;
status_ = false;
return false;
}
if (-1 == connect(sock, reinterpret_cast<struct sockaddr *>(&dest_addr),
sizeof(struct sockaddr))) {
logprintf(0, "Process Error: Cannot connect %s\n", ipaddr_);
pages_copied_ = 0;
status_ = false;
return false;
}
return true;
}
// Initiate the tcp connection.
bool NetworkListenThread::Listen() {
struct sockaddr_in sa;
memset(&(sa.sin_zero), '\0', sizeof(sa.sin_zero));
sa.sin_family = AF_INET;
sa.sin_addr.s_addr = INADDR_ANY;
sa.sin_port = htons(kNetworkPort);
if (-1 == bind(sock_, (struct sockaddr*)&sa, sizeof(struct sockaddr))) {
char buf[256];
sat_strerror(errno, buf, sizeof(buf));
logprintf(0, "Process Error: Cannot bind socket: %s\n", buf);
pages_copied_ = 0;
status_ = false;
return false;
}
listen(sock_, 3);
return true;
}
// Wait for a connection from a network traffic generation thread.
bool NetworkListenThread::Wait() {
fd_set rfds;
struct timeval tv;
int retval;
// Watch sock_ to see when it has input.
FD_ZERO(&rfds);
FD_SET(sock_, &rfds);
// Wait up to five seconds.
tv.tv_sec = 5;
tv.tv_usec = 0;
retval = select(sock_ + 1, &rfds, NULL, NULL, &tv);
return (retval > 0);
}
// Wait for a connection from a network traffic generation thread.
bool NetworkListenThread::GetConnection(int *pnewsock) {
struct sockaddr_in sa;
socklen_t size = sizeof(struct sockaddr_in);
int newsock = accept(sock_, reinterpret_cast<struct sockaddr *>(&sa), &size);
if (newsock < 0) {
logprintf(0, "Process Error: Did not receive connection\n");
pages_copied_ = 0;
status_ = false;
return false;
}
*pnewsock = newsock;
return true;
}
// Send a page, return false if a page was not sent.
bool NetworkThread::SendPage(int sock, struct page_entry *src) {
int page_length = sat_->page_length();
char *address = static_cast<char*>(src->addr);
// Send our data over the network.
int size = page_length;
while (size) {
int transferred = send(sock, address + (page_length - size), size, 0);
if ((transferred == 0) || (transferred == -1)) {
if (!IsNetworkStopSet()) {
char buf[256] = "";
sat_strerror(errno, buf, sizeof(buf));
logprintf(0, "Process Error: Thread %d, "
"Network write failed, bailing. (%s)\n",
thread_num_, buf);
status_ = false;
}
return false;
}
size = size - transferred;
}
return true;
}
// Receive a page. Return false if a page was not received.
bool NetworkThread::ReceivePage(int sock, struct page_entry *dst) {
int page_length = sat_->page_length();
char *address = static_cast<char*>(dst->addr);
// Maybe we will get our data back again, maybe not.
int size = page_length;
while (size) {
int transferred = recv(sock, address + (page_length - size), size, 0);
if ((transferred == 0) || (transferred == -1)) {
// Typically network slave thread should exit as network master
// thread stops sending data.
if (IsNetworkStopSet()) {
int err = errno;
if (transferred == 0 && err == 0) {
// Two system setups will not sync exactly,
// allow early exit, but log it.
logprintf(0, "Log: Net thread did not receive any data, exiting.\n");
} else {
char buf[256] = "";
sat_strerror(err, buf, sizeof(buf));
// Print why we failed.
logprintf(0, "Process Error: Thread %d, "
"Network read failed, bailing (%s).\n",
thread_num_, buf);
status_ = false;
// Print arguments and results.
logprintf(0, "Log: recv(%d, address %x, size %x, 0) == %x, err %d\n",
sock, address + (page_length - size),
size, transferred, err);
if ((transferred == 0) &&
(page_length - size < 512) &&
(page_length - size > 0)) {
// Print null terminated data received, to see who's been
// sending us supicious unwanted data.
address[page_length - size] = 0;
logprintf(0, "Log: received %d bytes: '%s'\n",
page_length - size, address);
}
}
}
return false;
}
size = size - transferred;
}
return true;
}
// Network IO work loop. Execute until marked done.
// Return true if the thread ran as expected.
bool NetworkThread::Work() {
logprintf(9, "Log: Starting network thread %d, ip %s\n",
thread_num_,
ipaddr_);
// Make a socket.
int sock = 0;
if (!CreateSocket(&sock))
return false;
// Network IO loop requires network slave thread to have already initialized.
// We will sleep here for awhile to ensure that the slave thread will be
// listening by the time we connect.
// Sleep for 15 seconds.
sat_sleep(15);
logprintf(9, "Log: Starting execution of network thread %d, ip %s\n",
thread_num_,
ipaddr_);
// Connect to a slave thread.
if (!Connect(sock))
return false;
// Loop until done.
bool result = true;
int strict = sat_->strict();
int64 loops = 0;
while (IsReadyToRun()) {
struct page_entry src;
struct page_entry dst;
result = result && sat_->GetValid(&src);
result = result && sat_->GetEmpty(&dst);
if (!result) {
logprintf(0, "Process Error: net_thread failed to pop pages, "
"bailing\n");
break;
}
// Check data correctness.
if (strict)
CrcCheckPage(&src);
// Do the network write.
if (!(result = result && SendPage(sock, &src)))
break;
// Update pattern reference to reflect new contents.
dst.pattern = src.pattern;
// Do the network read.
if (!(result = result && ReceivePage(sock, &dst)))
break;
// Ensure that the transfer ended up with correct data.
if (strict)
CrcCheckPage(&dst);
// Return all of our pages to the queue.
result = result && sat_->PutValid(&dst);
result = result && sat_->PutEmpty(&src);
if (!result) {
logprintf(0, "Process Error: net_thread failed to push pages, "
"bailing\n");
break;
}
loops++;
}
pages_copied_ = loops;
status_ = result;
// Clean up.
CloseSocket(sock);
logprintf(9, "Log: Completed %d: network thread status %d, "
"%d pages copied\n",
thread_num_, status_, pages_copied_);
return result;
}
// Spawn slave threads for incoming connections.
bool NetworkListenThread::SpawnSlave(int newsock, int threadid) {
logprintf(12, "Log: Listen thread spawning slave\n");
// Spawn slave thread, to reflect network traffic back to sender.
ChildWorker *child_worker = new ChildWorker;
child_worker->thread.SetSock(newsock);
child_worker->thread.InitThread(threadid, sat_, os_, patternlist_,
&child_worker->status);
child_worker->status.Initialize();
child_worker->thread.SpawnThread();
child_workers_.push_back(child_worker);
return true;
}
// Reap slave threads.
bool NetworkListenThread::ReapSlaves() {
bool result = true;
// Gather status and reap threads.
logprintf(12, "Log: Joining all outstanding threads\n");
for (size_t i = 0; i < child_workers_.size(); i++) {
NetworkSlaveThread& child_thread = child_workers_[i]->thread;
logprintf(12, "Log: Joining slave thread %d\n", i);
child_thread.JoinThread();
if (child_thread.GetStatus() != 1) {
logprintf(0, "Process Error: Slave Thread %d failed with status %d\n", i,
child_thread.GetStatus());
result = false;
}
errorcount_ += child_thread.GetErrorCount();
logprintf(9, "Log: Slave Thread %d found %lld miscompares\n", i,
child_thread.GetErrorCount());
pages_copied_ += child_thread.GetPageCount();
}
return result;
}
// Network listener IO work loop. Execute until marked done.
// Return false on fatal software error.
bool NetworkListenThread::Work() {
logprintf(9, "Log: Starting network listen thread %d\n",
thread_num_);
// Make a socket.
sock_ = 0;
if (!CreateSocket(&sock_)) {
status_ = false;
return false;
}
logprintf(9, "Log: Listen thread created sock\n");
// Allows incoming connections to be queued up by socket library.
int newsock = 0;
Listen();
logprintf(12, "Log: Listen thread waiting for incoming connections\n");
// Wait on incoming connections, and spawn worker threads for them.
int threadcount = 0;
while (IsReadyToRun()) {
// Poll for connections that we can accept().
if (Wait()) {
// Accept those connections.
logprintf(12, "Log: Listen thread found incoming connection\n");
if (GetConnection(&newsock)) {
SpawnSlave(newsock, threadcount);
threadcount++;
}
}
}
// Gather status and join spawned threads.
ReapSlaves();
// Delete the child workers.
for (ChildVector::iterator it = child_workers_.begin();
it != child_workers_.end(); ++it) {
(*it)->status.Destroy();
delete *it;
}
child_workers_.clear();
CloseSocket(sock_);
status_ = true;
logprintf(9,
"Log: Completed %d: network listen thread status %d, "
"%d pages copied\n",
thread_num_, status_, pages_copied_);
return true;
}
// Set network reflector socket struct.
void NetworkSlaveThread::SetSock(int sock) {
sock_ = sock;
}
// Network reflector IO work loop. Execute until marked done.
// Return false on fatal software error.
bool NetworkSlaveThread::Work() {
logprintf(9, "Log: Starting network slave thread %d\n",
thread_num_);
// Verify that we have a socket.
int sock = sock_;
if (!sock) {
status_ = false;
return false;
}
// Loop until done.
int64 loops = 0;
// Init a local buffer for storing data.
void *local_page = NULL;
#ifdef HAVE_POSIX_MEMALIGN
int result = posix_memalign(&local_page, 512, sat_->page_length());
#else
local_page = memalign(512, sat_->page_length());
int result = (local_page == 0);
#endif
if (result) {
logprintf(0, "Process Error: net slave posix_memalign "
"returned %d (fail)\n",
result);
status_ = false;
return false;
}
struct page_entry page;
page.addr = local_page;
// This thread will continue to run as long as the thread on the other end of
// the socket is still sending and receiving data.
while (1) {
// Do the network read.
if (!ReceivePage(sock, &page))
break;
// Do the network write.
if (!SendPage(sock, &page))
break;
loops++;
}
pages_copied_ = loops;
// No results provided from this type of thread.
status_ = true;
// Clean up.
CloseSocket(sock);
logprintf(9,
"Log: Completed %d: network slave thread status %d, "
"%d pages copied\n",
thread_num_, status_, pages_copied_);
return true;
}
// Thread work loop. Execute until marked finished.
bool ErrorPollThread::Work() {
logprintf(9, "Log: Starting system error poll thread %d\n", thread_num_);
// This calls a generic error polling function in the Os abstraction layer.
do {
errorcount_ += os_->ErrorPoll();
os_->ErrorWait();
} while (IsReadyToRun());
logprintf(9, "Log: Finished system error poll thread %d: %d errors\n",
thread_num_, errorcount_);
status_ = true;
return true;
}
// Worker thread to heat up CPU.
// This thread does not evaluate pass/fail or software error.
bool CpuStressThread::Work() {
logprintf(9, "Log: Starting CPU stress thread %d\n", thread_num_);
do {
// Run ludloff's platform/CPU-specific assembly workload.
os_->CpuStressWorkload();
YieldSelf();
} while (IsReadyToRun());
logprintf(9, "Log: Finished CPU stress thread %d:\n",
thread_num_);
status_ = true;
return true;
}
CpuCacheCoherencyThread::CpuCacheCoherencyThread(cc_cacheline_data *data,
int cacheline_count,
int thread_num,
int inc_count) {
cc_cacheline_data_ = data;
cc_cacheline_count_ = cacheline_count;
cc_thread_num_ = thread_num;
cc_inc_count_ = inc_count;
}
// Worked thread to test the cache coherency of the CPUs
// Return false on fatal sw error.
bool CpuCacheCoherencyThread::Work() {
logprintf(9, "Log: Starting the Cache Coherency thread %d\n",
cc_thread_num_);
uint64 time_start, time_end;
struct timeval tv;
unsigned int seed = static_cast<unsigned int>(gettid());
gettimeofday(&tv, NULL); // Get the timestamp before increments.
time_start = tv.tv_sec * 1000000ULL + tv.tv_usec;
uint64 total_inc = 0; // Total increments done by the thread.
while (IsReadyToRun()) {
for (int i = 0; i < cc_inc_count_; i++) {
// Choose a datastructure in random and increment the appropriate
// member in that according to the offset (which is the same as the
// thread number.
#ifdef HAVE_RAND_R
int r = rand_r(&seed);
#else
int r = rand();
#endif
r = cc_cacheline_count_ * (r / (RAND_MAX + 1.0));
// Increment the member of the randomely selected structure.
(cc_cacheline_data_[r].num[cc_thread_num_])++;
}
total_inc += cc_inc_count_;
// Calculate if the local counter matches with the global value
// in all the cache line structures for this particular thread.
int cc_global_num = 0;
for (int cline_num = 0; cline_num < cc_cacheline_count_; cline_num++) {
cc_global_num += cc_cacheline_data_[cline_num].num[cc_thread_num_];
// Reset the cachline member's value for the next run.
cc_cacheline_data_[cline_num].num[cc_thread_num_] = 0;
}
if (sat_->error_injection())
cc_global_num = -1;
if (cc_global_num != cc_inc_count_) {
errorcount_++;
logprintf(0, "Hardware Error: global(%d) and local(%d) do not match\n",
cc_global_num, cc_inc_count_);
}
}
gettimeofday(&tv, NULL); // Get the timestamp at the end.
time_end = tv.tv_sec * 1000000ULL + tv.tv_usec;
uint64 us_elapsed = time_end - time_start;
// inc_rate is the no. of increments per second.
double inc_rate = total_inc * 1e6 / us_elapsed;
logprintf(4, "Stats: CC Thread(%d): Time=%llu us,"
" Increments=%llu, Increments/sec = %.6lf\n",
cc_thread_num_, us_elapsed, total_inc, inc_rate);
logprintf(9, "Log: Finished CPU Cache Coherency thread %d:\n",
cc_thread_num_);
status_ = true;
return true;
}
DiskThread::DiskThread(DiskBlockTable *block_table) {
read_block_size_ = kSectorSize; // default 1 sector (512 bytes)
write_block_size_ = kSectorSize; // this assumes read and write block size
// are the same
segment_size_ = -1; // use the entire disk as one segment
cache_size_ = 16 * 1024 * 1024; // assume 16MiB cache by default
// Use a queue such that 3/2 times as much data as the cache can hold
// is written before it is read so that there is little chance the read
// data is in the cache.
queue_size_ = ((cache_size_ / write_block_size_) * 3) / 2;
blocks_per_segment_ = 32;
read_threshold_ = 100000; // 100ms is a reasonable limit for
write_threshold_ = 100000; // reading/writing a sector
read_timeout_ = 5000000; // 5 seconds should be long enough for a
write_timeout_ = 5000000; // timout for reading/writing
device_sectors_ = 0;
non_destructive_ = 0;
#ifdef HAVE_LIBAIO_H
aio_ctx_ = 0;
#endif
block_table_ = block_table;
update_block_table_ = 1;
block_buffer_ = NULL;
blocks_written_ = 0;
blocks_read_ = 0;
}
DiskThread::~DiskThread() {
if (block_buffer_)
free(block_buffer_);
}
// Set filename for device file (in /dev).
void DiskThread::SetDevice(const char *device_name) {
device_name_ = device_name;
}
// Set various parameters that control the behaviour of the test.
// -1 is used as a sentinel value on each parameter (except non_destructive)
// to indicate that the parameter not be set.
bool DiskThread::SetParameters(int read_block_size,
int write_block_size,
int64 segment_size,
int64 cache_size,
int blocks_per_segment,
int64 read_threshold,
int64 write_threshold,
int non_destructive) {
if (read_block_size != -1) {
// Blocks must be aligned to the disk's sector size.
if (read_block_size % kSectorSize != 0) {
logprintf(0, "Process Error: Block size must be a multiple of %d "
"(thread %d).\n", kSectorSize, thread_num_);
return false;
}
read_block_size_ = read_block_size;
}
if (write_block_size != -1) {
// Write blocks must be aligned to the disk's sector size and to the
// block size.
if (write_block_size % kSectorSize != 0) {
logprintf(0, "Process Error: Write block size must be a multiple "
"of %d (thread %d).\n", kSectorSize, thread_num_);
return false;
}
if (write_block_size % read_block_size_ != 0) {
logprintf(0, "Process Error: Write block size must be a multiple "
"of the read block size, which is %d (thread %d).\n",
read_block_size_, thread_num_);
return false;
}
write_block_size_ = write_block_size;
} else {
// Make sure write_block_size_ is still valid.
if (read_block_size_ > write_block_size_) {
logprintf(5, "Log: Assuming write block size equal to read block size, "
"which is %d (thread %d).\n", read_block_size_,
thread_num_);
write_block_size_ = read_block_size_;
} else {
if (write_block_size_ % read_block_size_ != 0) {
logprintf(0, "Process Error: Write block size (defined as %d) must "
"be a multiple of the read block size, which is %d "
"(thread %d).\n", write_block_size_, read_block_size_,
thread_num_);
return false;
}
}
}
if (cache_size != -1) {
cache_size_ = cache_size;
}
if (blocks_per_segment != -1) {
if (blocks_per_segment <= 0) {
logprintf(0, "Process Error: Blocks per segment must be greater than "
"zero.\n (thread %d)", thread_num_);
return false;
}
blocks_per_segment_ = blocks_per_segment;
}
if (read_threshold != -1) {
if (read_threshold <= 0) {
logprintf(0, "Process Error: Read threshold must be greater than "
"zero (thread %d).\n", thread_num_);
return false;
}
read_threshold_ = read_threshold;
}
if (write_threshold != -1) {
if (write_threshold <= 0) {
logprintf(0, "Process Error: Write threshold must be greater than "
"zero (thread %d).\n", thread_num_);
return false;
}
write_threshold_ = write_threshold;
}
if (segment_size != -1) {
// Segments must be aligned to the disk's sector size.
if (segment_size % kSectorSize != 0) {
logprintf(0, "Process Error: Segment size must be a multiple of %d"
" (thread %d).\n", kSectorSize, thread_num_);
return false;
}
segment_size_ = segment_size / kSectorSize;
}
non_destructive_ = non_destructive;
// Having a queue of 150% of blocks that will fit in the disk's cache
// should be enough to force out the oldest block before it is read and hence,
// making sure the data comes form the disk and not the cache.
queue_size_ = ((cache_size_ / write_block_size_) * 3) / 2;
// Updating DiskBlockTable parameters
if (update_block_table_) {
block_table_->SetParameters(kSectorSize, write_block_size_,
device_sectors_, segment_size_,
device_name_);
}
return true;
}
// Open a device, return false on failure.
bool DiskThread::OpenDevice(int *pfile) {
bool no_O_DIRECT = false;
int flags = O_RDWR | O_SYNC | O_LARGEFILE;
int fd = open(device_name_.c_str(), flags | O_DIRECT, 0);
if (O_DIRECT != 0 && fd < 0 && errno == EINVAL) {
no_O_DIRECT = true;
fd = open(device_name_.c_str(), flags, 0); // Try without O_DIRECT
}
if (fd < 0) {
logprintf(0, "Process Error: Failed to open device %s (thread %d)!!\n",
device_name_.c_str(), thread_num_);
return false;
}
if (no_O_DIRECT)
os_->ActivateFlushPageCache();
*pfile = fd;
return GetDiskSize(fd);
}
// Retrieves the size (in bytes) of the disk/file.
// Return false on failure.
bool DiskThread::GetDiskSize(int fd) {
struct stat device_stat;
if (fstat(fd, &device_stat) == -1) {
logprintf(0, "Process Error: Unable to fstat disk %s (thread %d).\n",
device_name_.c_str(), thread_num_);
return false;
}
// For a block device, an ioctl is needed to get the size since the size
// of the device file (i.e. /dev/sdb) is 0.
if (S_ISBLK(device_stat.st_mode)) {
uint64 block_size = 0;
if (ioctl(fd, BLKGETSIZE64, &block_size) == -1) {
logprintf(0, "Process Error: Unable to ioctl disk %s (thread %d).\n",
device_name_.c_str(), thread_num_);
return false;
}
// Zero size indicates nonworking device..
if (block_size == 0) {
os_->ErrorReport(device_name_.c_str(), "device-size-zero", 1);
++errorcount_;
status_ = true; // Avoid a procedural error.
return false;
}
device_sectors_ = block_size / kSectorSize;
} else if (S_ISREG(device_stat.st_mode)) {
device_sectors_ = device_stat.st_size / kSectorSize;
} else {
logprintf(0, "Process Error: %s is not a regular file or block "
"device (thread %d).\n", device_name_.c_str(),
thread_num_);
return false;
}
logprintf(12, "Log: Device sectors: %lld on disk %s (thread %d).\n",
device_sectors_, device_name_.c_str(), thread_num_);
if (update_block_table_) {
block_table_->SetParameters(kSectorSize, write_block_size_,
device_sectors_, segment_size_,
device_name_);
}
return true;
}
bool DiskThread::CloseDevice(int fd) {
close(fd);
return true;
}
// Return the time in microseconds.
int64 DiskThread::GetTime() {
struct timeval tv;
gettimeofday(&tv, NULL);
return tv.tv_sec * 1000000 + tv.tv_usec;
}
// Do randomized reads and (possibly) writes on a device.
// Return false on fatal SW error, true on SW success,
// regardless of whether HW failed.
bool DiskThread::DoWork(int fd) {
int64 block_num = 0;
int64 num_segments;
if (segment_size_ == -1) {
num_segments = 1;
} else {
num_segments = device_sectors_ / segment_size_;
if (device_sectors_ % segment_size_ != 0)
num_segments++;
}
// Disk size should be at least 3x cache size. See comment later for
// details.
sat_assert(device_sectors_ * kSectorSize > 3 * cache_size_);
// This disk test works by writing blocks with a certain pattern to
// disk, then reading them back and verifying it against the pattern
// at a later time. A failure happens when either the block cannot
// be written/read or when the read block is different than what was
// written. If a block takes too long to write/read, then a warning
// is given instead of an error since taking too long is not
// necessarily an error.
//
// To prevent the read blocks from coming from the disk cache,
// enough blocks are written before read such that a block would
// be ejected from the disk cache by the time it is read.
//
// TODO(amistry): Implement some sort of read/write throttling. The
// flood of asynchronous I/O requests when a drive is
// unplugged is causing the application and kernel to
// become unresponsive.
while (IsReadyToRun()) {
// Write blocks to disk.
logprintf(16, "Log: Write phase %sfor disk %s (thread %d).\n",
non_destructive_ ? "(disabled) " : "",
device_name_.c_str(), thread_num_);
while (IsReadyToRunNoPause() &&
in_flight_sectors_.size() <
static_cast<size_t>(queue_size_ + 1)) {
// Confine testing to a particular segment of the disk.
int64 segment = (block_num / blocks_per_segment_) % num_segments;
if (!non_destructive_ &&
(block_num % blocks_per_segment_ == 0)) {
logprintf(20, "Log: Starting to write segment %lld out of "
"%lld on disk %s (thread %d).\n",
segment, num_segments, device_name_.c_str(),
thread_num_);
}
block_num++;
BlockData *block = block_table_->GetUnusedBlock(segment);
// If an unused sequence of sectors could not be found, skip to the
// next block to process. Soon, a new segment will come and new
// sectors will be able to be allocated. This effectively puts a
// minumim on the disk size at 3x the stated cache size, or 48MiB
// if a cache size is not given (since the cache is set as 16MiB
// by default). Given that todays caches are at the low MiB range
// and drive sizes at the mid GB, this shouldn't pose a problem.
// The 3x minimum comes from the following:
// 1. In order to allocate 'y' blocks from a segment, the
// segment must contain at least 2y blocks or else an
// allocation may not succeed.
// 2. Assume the entire disk is one segment.
// 3. A full write phase consists of writing blocks corresponding to
// 3/2 cache size.
// 4. Therefore, the one segment must have 2 * 3/2 * cache
// size worth of blocks = 3 * cache size worth of blocks
// to complete.
// In non-destructive mode, don't write anything to disk.
if (!non_destructive_) {
if (!WriteBlockToDisk(fd, block)) {
block_table_->RemoveBlock(block);
return true;
}
blocks_written_++;
}
// Block is either initialized by writing, or in nondestructive case,
// initialized by being added into the datastructure for later reading.
block->SetBlockAsInitialized();
in_flight_sectors_.push(block);
}
if (!os_->FlushPageCache()) // If O_DIRECT worked, this will be a NOP.
return false;
// Verify blocks on disk.
logprintf(20, "Log: Read phase for disk %s (thread %d).\n",
device_name_.c_str(), thread_num_);
while (IsReadyToRunNoPause() && !in_flight_sectors_.empty()) {
BlockData *block = in_flight_sectors_.front();
in_flight_sectors_.pop();
if (!ValidateBlockOnDisk(fd, block))
return true;
block_table_->RemoveBlock(block);
blocks_read_++;
}
}
pages_copied_ = blocks_written_ + blocks_read_;
return true;
}
// Do an asynchronous disk I/O operation.
// Return false if the IO is not set up.
bool DiskThread::AsyncDiskIO(IoOp op, int fd, void *buf, int64 size,
int64 offset, int64 timeout) {
#ifdef HAVE_LIBAIO_H
// Use the Linux native asynchronous I/O interface for reading/writing.
// A read/write consists of three basic steps:
// 1. create an io context.
// 2. prepare and submit an io request to the context
// 3. wait for an event on the context.
struct {
const int opcode;
const char *op_str;
const char *error_str;
} operations[2] = {
{ IO_CMD_PREAD, "read", "disk-read-error" },
{ IO_CMD_PWRITE, "write", "disk-write-error" }
};
struct iocb cb;
memset(&cb, 0, sizeof(cb));
cb.aio_fildes = fd;
cb.aio_lio_opcode = operations[op].opcode;
cb.u.c.buf = buf;
cb.u.c.nbytes = size;
cb.u.c.offset = offset;
struct iocb *cbs[] = { &cb };
if (io_submit(aio_ctx_, 1, cbs) != 1) {
int error = errno;
char buf[256];
sat_strerror(error, buf, sizeof(buf));
logprintf(0, "Process Error: Unable to submit async %s "
"on disk %s (thread %d). Error %d, %s\n",
operations[op].op_str, device_name_.c_str(),
thread_num_, error, buf);
return false;
}
struct io_event event;
memset(&event, 0, sizeof(event));
struct timespec tv;
tv.tv_sec = timeout / 1000000;
tv.tv_nsec = (timeout % 1000000) * 1000;
if (io_getevents(aio_ctx_, 1, 1, &event, &tv) != 1) {
// A ctrl-c from the keyboard will cause io_getevents to fail with an
// EINTR error code. This is not an error and so don't treat it as such,
// but still log it.
int error = errno;
if (error == EINTR) {
logprintf(5, "Log: %s interrupted on disk %s (thread %d).\n",
operations[op].op_str, device_name_.c_str(),
thread_num_);
} else {
os_->ErrorReport(device_name_.c_str(), operations[op].error_str, 1);
errorcount_ += 1;
logprintf(0, "Hardware Error: Timeout doing async %s to sectors "
"starting at %lld on disk %s (thread %d).\n",
operations[op].op_str, offset / kSectorSize,
device_name_.c_str(), thread_num_);
}
// Don't bother checking return codes since io_cancel seems to always fail.
// Since io_cancel is always failing, destroying and recreating an I/O
// context is a workaround for canceling an in-progress I/O operation.
// TODO(amistry): Find out why io_cancel isn't working and make it work.
io_cancel(aio_ctx_, &cb, &event);
io_destroy(aio_ctx_);
aio_ctx_ = 0;
if (io_setup(5, &aio_ctx_)) {
int error = errno;
char buf[256];
sat_strerror(error, buf, sizeof(buf));
logprintf(0, "Process Error: Unable to create aio context on disk %s"
" (thread %d) Error %d, %s\n",
device_name_.c_str(), thread_num_, error, buf);
}
return false;
}
// event.res contains the number of bytes written/read or
// error if < 0, I think.
if (event.res != static_cast<uint64>(size)) {
errorcount_++;
os_->ErrorReport(device_name_.c_str(), operations[op].error_str, 1);
if (event.res < 0) {
switch (event.res) {
case -EIO:
logprintf(0, "Hardware Error: Low-level I/O error while doing %s to "
"sectors starting at %lld on disk %s (thread %d).\n",
operations[op].op_str, offset / kSectorSize,
device_name_.c_str(), thread_num_);
break;
default:
logprintf(0, "Hardware Error: Unknown error while doing %s to "
"sectors starting at %lld on disk %s (thread %d).\n",
operations[op].op_str, offset / kSectorSize,
device_name_.c_str(), thread_num_);
}
} else {
logprintf(0, "Hardware Error: Unable to %s to sectors starting at "
"%lld on disk %s (thread %d).\n",
operations[op].op_str, offset / kSectorSize,
device_name_.c_str(), thread_num_);
}
return false;
}
return true;
#else // !HAVE_LIBAIO_H
return false;
#endif
}
// Write a block to disk.
// Return false if the block is not written.
bool DiskThread::WriteBlockToDisk(int fd, BlockData *block) {
memset(block_buffer_, 0, block->GetSize());
// Fill block buffer with a pattern
struct page_entry pe;
if (!sat_->GetValid(&pe)) {
// Even though a valid page could not be obatined, it is not an error
// since we can always fill in a pattern directly, albeit slower.
unsigned int *memblock = static_cast<unsigned int *>(block_buffer_);
block->SetPattern(patternlist_->GetRandomPattern());
logprintf(11, "Log: Warning, using pattern fill fallback in "
"DiskThread::WriteBlockToDisk on disk %s (thread %d).\n",
device_name_.c_str(), thread_num_);
for (int i = 0; i < block->GetSize()/wordsize_; i++) {
memblock[i] = block->GetPattern()->pattern(i);
}
} else {
memcpy(block_buffer_, pe.addr, block->GetSize());
block->SetPattern(pe.pattern);
sat_->PutValid(&pe);
}
logprintf(12, "Log: Writing %lld sectors starting at %lld on disk %s"
" (thread %d).\n",
block->GetSize()/kSectorSize, block->GetAddress(),
device_name_.c_str(), thread_num_);
int64 start_time = GetTime();
if (!AsyncDiskIO(ASYNC_IO_WRITE, fd, block_buffer_, block->GetSize(),
block->GetAddress() * kSectorSize, write_timeout_)) {
return false;
}
int64 end_time = GetTime();
logprintf(12, "Log: Writing time: %lld us (thread %d).\n",
end_time - start_time, thread_num_);
if (end_time - start_time > write_threshold_) {
logprintf(5, "Log: Write took %lld us which is longer than threshold "
"%lld us on disk %s (thread %d).\n",
end_time - start_time, write_threshold_, device_name_.c_str(),
thread_num_);
}
return true;
}
// Verify a block on disk.
// Return true if the block was read, also increment errorcount
// if the block had data errors or performance problems.
bool DiskThread::ValidateBlockOnDisk(int fd, BlockData *block) {
int64 blocks = block->GetSize() / read_block_size_;
int64 bytes_read = 0;
int64 current_blocks;
int64 current_bytes;
uint64 address = block->GetAddress();
logprintf(20, "Log: Reading sectors starting at %lld on disk %s "
"(thread %d).\n",
address, device_name_.c_str(), thread_num_);
// Read block from disk and time the read. If it takes longer than the
// threshold, complain.
if (lseek64(fd, address * kSectorSize, SEEK_SET) == -1) {
logprintf(0, "Process Error: Unable to seek to sector %lld in "
"DiskThread::ValidateSectorsOnDisk on disk %s "
"(thread %d).\n", address, device_name_.c_str(), thread_num_);
return false;
}
int64 start_time = GetTime();
// Split a large write-sized block into small read-sized blocks and
// read them in groups of randomly-sized multiples of read block size.
// This assures all data written on disk by this particular block
// will be tested using a random reading pattern.
while (blocks != 0) {
// Test all read blocks in a written block.
current_blocks = (random() % blocks) + 1;
current_bytes = current_blocks * read_block_size_;
memset(block_buffer_, 0, current_bytes);
logprintf(20, "Log: Reading %lld sectors starting at sector %lld on "
"disk %s (thread %d)\n",
current_bytes / kSectorSize,
(address * kSectorSize + bytes_read) / kSectorSize,
device_name_.c_str(), thread_num_);
if (!AsyncDiskIO(ASYNC_IO_READ, fd, block_buffer_, current_bytes,
address * kSectorSize + bytes_read,
write_timeout_)) {
return false;
}
int64 end_time = GetTime();
logprintf(20, "Log: Reading time: %lld us (thread %d).\n",
end_time - start_time, thread_num_);
if (end_time - start_time > read_threshold_) {
logprintf(5, "Log: Read took %lld us which is longer than threshold "
"%lld us on disk %s (thread %d).\n",
end_time - start_time, read_threshold_,
device_name_.c_str(), thread_num_);
}
// In non-destructive mode, don't compare the block to the pattern since
// the block was never written to disk in the first place.
if (!non_destructive_) {
if (CheckRegion(block_buffer_, block->GetPattern(), current_bytes,
0, bytes_read)) {
os_->ErrorReport(device_name_.c_str(), "disk-pattern-error", 1);
errorcount_ += 1;
logprintf(0, "Hardware Error: Pattern mismatch in block starting at "
"sector %lld in DiskThread::ValidateSectorsOnDisk on "
"disk %s (thread %d).\n",
address, device_name_.c_str(), thread_num_);
}
}
bytes_read += current_blocks * read_block_size_;
blocks -= current_blocks;
}
return true;
}
// Direct device access thread.
// Return false on software error.
bool DiskThread::Work() {
int fd;
logprintf(9, "Log: Starting disk thread %d, disk %s\n",
thread_num_, device_name_.c_str());
srandom(time(NULL));
if (!OpenDevice(&fd)) {
status_ = false;
return false;
}
// Allocate a block buffer aligned to 512 bytes since the kernel requires it
// when using direct IO.
#ifdef HAVE_POSIX_MEMALIGN
int memalign_result = posix_memalign(&block_buffer_, kBufferAlignment,
sat_->page_length());
#else
block_buffer_ = memalign(kBufferAlignment, sat_->page_length());
int memalign_result = (block_buffer_ == 0);
#endif
if (memalign_result) {
CloseDevice(fd);
logprintf(0, "Process Error: Unable to allocate memory for buffers "
"for disk %s (thread %d) posix memalign returned %d.\n",
device_name_.c_str(), thread_num_, memalign_result);
status_ = false;
return false;
}
#ifdef HAVE_LIBAIO_H
if (io_setup(5, &aio_ctx_)) {
CloseDevice(fd);
logprintf(0, "Process Error: Unable to create aio context for disk %s"
" (thread %d).\n",
device_name_.c_str(), thread_num_);
status_ = false;
return false;
}
#endif
bool result = DoWork(fd);
status_ = result;
#ifdef HAVE_LIBAIO_H
io_destroy(aio_ctx_);
#endif
CloseDevice(fd);
logprintf(9, "Log: Completed %d (disk %s): disk thread status %d, "
"%d pages copied\n",
thread_num_, device_name_.c_str(), status_, pages_copied_);
return result;
}
RandomDiskThread::RandomDiskThread(DiskBlockTable *block_table)
: DiskThread(block_table) {
update_block_table_ = 0;
}
RandomDiskThread::~RandomDiskThread() {
}
// Workload for random disk thread.
bool RandomDiskThread::DoWork(int fd) {
logprintf(11, "Log: Random phase for disk %s (thread %d).\n",
device_name_.c_str(), thread_num_);
while (IsReadyToRun()) {
BlockData *block = block_table_->GetRandomBlock();
if (block == NULL) {
logprintf(12, "Log: No block available for device %s (thread %d).\n",
device_name_.c_str(), thread_num_);
} else {
ValidateBlockOnDisk(fd, block);
block_table_->ReleaseBlock(block);
blocks_read_++;
}
}
pages_copied_ = blocks_read_;
return true;
}
MemoryRegionThread::MemoryRegionThread() {
error_injection_ = false;
pages_ = NULL;
}
MemoryRegionThread::~MemoryRegionThread() {
if (pages_ != NULL)
delete pages_;
}
// Set a region of memory or MMIO to be tested.
// Return false if region could not be mapped.
bool MemoryRegionThread::SetRegion(void *region, int64 size) {
int plength = sat_->page_length();
int npages = size / plength;
if (size % plength) {
logprintf(0, "Process Error: region size is not a multiple of SAT "
"page length\n");
return false;
} else {
if (pages_ != NULL)
delete pages_;
pages_ = new PageEntryQueue(npages);
char *base_addr = reinterpret_cast<char*>(region);
region_ = base_addr;
for (int i = 0; i < npages; i++) {
struct page_entry pe;
init_pe(&pe);
pe.addr = reinterpret_cast<void*>(base_addr + i * plength);
pe.offset = i * plength;
pages_->Push(&pe);
}
return true;
}
}
// More detailed error printout for hardware errors in memory or MMIO
// regions.
void MemoryRegionThread::ProcessError(struct ErrorRecord *error,
int priority,
const char *message) {
uint32 buffer_offset;
if (phase_ == kPhaseCopy) {
// If the error occurred on the Copy Phase, it means that
// the source data (i.e., the main memory) is wrong. so
// just pass it to the original ProcessError to call a
// bad-dimm error
WorkerThread::ProcessError(error, priority, message);
} else if (phase_ == kPhaseCheck) {
// A error on the Check Phase means that the memory region tested
// has an error. Gathering more information and then reporting
// the error.
// Determine if this is a write or read error.
os_->Flush(error->vaddr);
error->reread = *(error->vaddr);
char *good = reinterpret_cast<char*>(&(error->expected));
char *bad = reinterpret_cast<char*>(&(error->actual));
sat_assert(error->expected != error->actual);
unsigned int offset = 0;
for (offset = 0; offset < (sizeof(error->expected) - 1); offset++) {
if (good[offset] != bad[offset])
break;
}
error->vbyteaddr = reinterpret_cast<char*>(error->vaddr) + offset;
buffer_offset = error->vbyteaddr - region_;
// Find physical address if possible.
error->paddr = os_->VirtualToPhysical(error->vbyteaddr);
logprintf(priority,
"%s: miscompare on %s, CRC check at %p(0x%llx), "
"offset %llx: read:0x%016llx, reread:0x%016llx "
"expected:0x%016llx\n",
message,
identifier_.c_str(),
error->vaddr,
error->paddr,
buffer_offset,
error->actual,
error->reread,
error->expected);
} else {
logprintf(0, "Process Error: memory region thread raised an "
"unexpected error.");
}
}
// Workload for testion memory or MMIO regions.
// Return false on software error.
bool MemoryRegionThread::Work() {
struct page_entry source_pe;
struct page_entry memregion_pe;
bool result = true;
int64 loops = 0;
const uint64 error_constant = 0x00ba00000000ba00LL;
// For error injection.
int64 *addr = 0x0;
int offset = 0;
int64 data = 0;
logprintf(9, "Log: Starting Memory Region thread %d\n", thread_num_);
while (IsReadyToRun()) {
// Getting pages from SAT and queue.
phase_ = kPhaseNoPhase;
result = result && sat_->GetValid(&source_pe);
if (!result) {
logprintf(0, "Process Error: memory region thread failed to pop "
"pages from SAT, bailing\n");
break;
}
result = result && pages_->PopRandom(&memregion_pe);
if (!result) {
logprintf(0, "Process Error: memory region thread failed to pop "
"pages from queue, bailing\n");
break;
}
// Error injection for CRC copy.
if ((sat_->error_injection() || error_injection_) && loops == 1) {
addr = reinterpret_cast<int64*>(source_pe.addr);
offset = random() % (sat_->page_length() / wordsize_);
data = addr[offset];
addr[offset] = error_constant;
}
// Copying SAT page into memory region.
phase_ = kPhaseCopy;
CrcCopyPage(&memregion_pe, &source_pe);
memregion_pe.pattern = source_pe.pattern;
// Error injection for CRC Check.
if ((sat_->error_injection() || error_injection_) && loops == 2) {
addr = reinterpret_cast<int64*>(memregion_pe.addr);
offset = random() % (sat_->page_length() / wordsize_);
data = addr[offset];
addr[offset] = error_constant;
}
// Checking page content in memory region.
phase_ = kPhaseCheck;
CrcCheckPage(&memregion_pe);
phase_ = kPhaseNoPhase;
// Storing pages on their proper queues.
result = result && sat_->PutValid(&source_pe);
if (!result) {
logprintf(0, "Process Error: memory region thread failed to push "
"pages into SAT, bailing\n");
break;
}
result = result && pages_->Push(&memregion_pe);
if (!result) {
logprintf(0, "Process Error: memory region thread failed to push "
"pages into queue, bailing\n");
break;
}
if ((sat_->error_injection() || error_injection_) &&
loops >= 1 && loops <= 2) {
addr[offset] = data;
}
loops++;
YieldSelf();
}
pages_copied_ = loops;
status_ = result;
logprintf(9, "Log: Completed %d: Memory Region thread. Status %d, %d "
"pages checked\n", thread_num_, status_, pages_copied_);
return result;
}