/*
* Copyright (C) 2009 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ART_COMPILER_UTILS_ARM_CONSTANTS_ARM_H_
#define ART_COMPILER_UTILS_ARM_CONSTANTS_ARM_H_
#include <stdint.h>
#include <iosfwd>
#include "arch/arm/registers_arm.h"
#include "base/casts.h"
#include "base/logging.h"
#include "globals.h"
namespace art {
namespace arm {
// Defines constants and accessor classes to assemble, disassemble and
// simulate ARM instructions.
//
// Section references in the code refer to the "ARM Architecture Reference
// Manual" from July 2005 (available at http://www.arm.com/miscPDFs/14128.pdf)
//
// Constants for specific fields are defined in their respective named enums.
// General constants are in an anonymous enum in class Instr.
// We support both VFPv3-D16 and VFPv3-D32 profiles, but currently only one at
// a time, so that compile time optimizations can be applied.
// Warning: VFPv3-D32 is untested.
#define VFPv3_D16
#if defined(VFPv3_D16) == defined(VFPv3_D32)
#error "Exactly one of VFPv3_D16 or VFPv3_D32 can be defined at a time."
#endif
enum ScaleFactor {
TIMES_1 = 0,
TIMES_2 = 1,
TIMES_4 = 2,
TIMES_8 = 3
};
// Values for double-precision floating point registers.
enum DRegister {
D0 = 0,
D1 = 1,
D2 = 2,
D3 = 3,
D4 = 4,
D5 = 5,
D6 = 6,
D7 = 7,
D8 = 8,
D9 = 9,
D10 = 10,
D11 = 11,
D12 = 12,
D13 = 13,
D14 = 14,
D15 = 15,
#ifdef VFPv3_D16
kNumberOfDRegisters = 16,
#else
D16 = 16,
D17 = 17,
D18 = 18,
D19 = 19,
D20 = 20,
D21 = 21,
D22 = 22,
D23 = 23,
D24 = 24,
D25 = 25,
D26 = 26,
D27 = 27,
D28 = 28,
D29 = 29,
D30 = 30,
D31 = 31,
kNumberOfDRegisters = 32,
#endif
kNumberOfOverlappingDRegisters = 16,
kNoDRegister = -1,
};
std::ostream& operator<<(std::ostream& os, const DRegister& rhs);
// Values for the condition field as defined in section A3.2.
enum Condition {
kNoCondition = -1,
EQ = 0, // equal
NE = 1, // not equal
CS = 2, // carry set/unsigned higher or same
CC = 3, // carry clear/unsigned lower
MI = 4, // minus/negative
PL = 5, // plus/positive or zero
VS = 6, // overflow
VC = 7, // no overflow
HI = 8, // unsigned higher
LS = 9, // unsigned lower or same
GE = 10, // signed greater than or equal
LT = 11, // signed less than
GT = 12, // signed greater than
LE = 13, // signed less than or equal
AL = 14, // always (unconditional)
kSpecialCondition = 15, // special condition (refer to section A3.2.1)
kMaxCondition = 16,
};
std::ostream& operator<<(std::ostream& os, const Condition& rhs);
// Opcodes for Data-processing instructions (instructions with a type 0 and 1)
// as defined in section A3.4
enum Opcode {
kNoOperand = -1,
AND = 0, // Logical AND
EOR = 1, // Logical Exclusive OR
SUB = 2, // Subtract
RSB = 3, // Reverse Subtract
ADD = 4, // Add
ADC = 5, // Add with Carry
SBC = 6, // Subtract with Carry
RSC = 7, // Reverse Subtract with Carry
TST = 8, // Test
TEQ = 9, // Test Equivalence
CMP = 10, // Compare
CMN = 11, // Compare Negated
ORR = 12, // Logical (inclusive) OR
MOV = 13, // Move
BIC = 14, // Bit Clear
MVN = 15, // Move Not
kMaxOperand = 16
};
// Shifter types for Data-processing operands as defined in section A5.1.2.
enum Shift {
kNoShift = -1,
LSL = 0, // Logical shift left
LSR = 1, // Logical shift right
ASR = 2, // Arithmetic shift right
ROR = 3, // Rotate right
RRX = 4, // Rotate right with extend.
kMaxShift
};
// Constants used for the decoding or encoding of the individual fields of
// instructions. Based on the "Figure 3-1 ARM instruction set summary".
enum InstructionFields {
kConditionShift = 28,
kConditionBits = 4,
kTypeShift = 25,
kTypeBits = 3,
kLinkShift = 24,
kLinkBits = 1,
kUShift = 23,
kUBits = 1,
kOpcodeShift = 21,
kOpcodeBits = 4,
kSShift = 20,
kSBits = 1,
kRnShift = 16,
kRnBits = 4,
kRdShift = 12,
kRdBits = 4,
kRsShift = 8,
kRsBits = 4,
kRmShift = 0,
kRmBits = 4,
// Immediate instruction fields encoding.
kRotateShift = 8,
kRotateBits = 4,
kImmed8Shift = 0,
kImmed8Bits = 8,
// Shift instruction register fields encodings.
kShiftImmShift = 7,
kShiftRegisterShift = 8,
kShiftImmBits = 5,
kShiftShift = 5,
kShiftBits = 2,
// Load/store instruction offset field encoding.
kOffset12Shift = 0,
kOffset12Bits = 12,
kOffset12Mask = 0x00000fff,
// Mul instruction register fields encodings.
kMulRdShift = 16,
kMulRdBits = 4,
kMulRnShift = 12,
kMulRnBits = 4,
kBranchOffsetMask = 0x00ffffff
};
// Size (in bytes) of registers.
const int kRegisterSize = 4;
// List of registers used in load/store multiple.
typedef uint16_t RegList;
// The class Instr enables access to individual fields defined in the ARM
// architecture instruction set encoding as described in figure A3-1.
//
// Example: Test whether the instruction at ptr does set the condition code
// bits.
//
// bool InstructionSetsConditionCodes(byte* ptr) {
// Instr* instr = Instr::At(ptr);
// int type = instr->TypeField();
// return ((type == 0) || (type == 1)) && instr->HasS();
// }
//
class Instr {
public:
enum {
kInstrSize = 4,
kInstrSizeLog2 = 2,
kPCReadOffset = 8
};
bool IsBreakPoint() {
return IsBkpt();
}
// Get the raw instruction bits.
int32_t InstructionBits() const {
return *reinterpret_cast<const int32_t*>(this);
}
// Set the raw instruction bits to value.
void SetInstructionBits(int32_t value) {
*reinterpret_cast<int32_t*>(this) = value;
}
// Read one particular bit out of the instruction bits.
int Bit(int nr) const {
return (InstructionBits() >> nr) & 1;
}
// Read a bit field out of the instruction bits.
int Bits(int shift, int count) const {
return (InstructionBits() >> shift) & ((1 << count) - 1);
}
// Accessors for the different named fields used in the ARM encoding.
// The naming of these accessor corresponds to figure A3-1.
// Generally applicable fields
Condition ConditionField() const {
return static_cast<Condition>(Bits(kConditionShift, kConditionBits));
}
int TypeField() const { return Bits(kTypeShift, kTypeBits); }
Register RnField() const { return static_cast<Register>(
Bits(kRnShift, kRnBits)); }
Register RdField() const { return static_cast<Register>(
Bits(kRdShift, kRdBits)); }
// Fields used in Data processing instructions
Opcode OpcodeField() const {
return static_cast<Opcode>(Bits(kOpcodeShift, kOpcodeBits));
}
int SField() const { return Bits(kSShift, kSBits); }
// with register
Register RmField() const {
return static_cast<Register>(Bits(kRmShift, kRmBits));
}
Shift ShiftField() const { return static_cast<Shift>(
Bits(kShiftShift, kShiftBits)); }
int RegShiftField() const { return Bit(4); }
Register RsField() const {
return static_cast<Register>(Bits(kRsShift, kRsBits));
}
int ShiftAmountField() const { return Bits(kShiftImmShift,
kShiftImmBits); }
// with immediate
int RotateField() const { return Bits(kRotateShift, kRotateBits); }
int Immed8Field() const { return Bits(kImmed8Shift, kImmed8Bits); }
// Fields used in Load/Store instructions
int PUField() const { return Bits(23, 2); }
int BField() const { return Bit(22); }
int WField() const { return Bit(21); }
int LField() const { return Bit(20); }
// with register uses same fields as Data processing instructions above
// with immediate
int Offset12Field() const { return Bits(kOffset12Shift,
kOffset12Bits); }
// multiple
int RlistField() const { return Bits(0, 16); }
// extra loads and stores
int SignField() const { return Bit(6); }
int HField() const { return Bit(5); }
int ImmedHField() const { return Bits(8, 4); }
int ImmedLField() const { return Bits(0, 4); }
// Fields used in Branch instructions
int LinkField() const { return Bits(kLinkShift, kLinkBits); }
int SImmed24Field() const { return ((InstructionBits() << 8) >> 8); }
// Fields used in Supervisor Call instructions
uint32_t SvcField() const { return Bits(0, 24); }
// Field used in Breakpoint instruction
uint16_t BkptField() const {
return ((Bits(8, 12) << 4) | Bits(0, 4));
}
// Field used in 16-bit immediate move instructions
uint16_t MovwField() const {
return ((Bits(16, 4) << 12) | Bits(0, 12));
}
// Field used in VFP float immediate move instruction
float ImmFloatField() const {
uint32_t imm32 = (Bit(19) << 31) | (((1 << 5) - Bit(18)) << 25) |
(Bits(16, 2) << 23) | (Bits(0, 4) << 19);
return bit_cast<float, uint32_t>(imm32);
}
// Field used in VFP double immediate move instruction
double ImmDoubleField() const {
uint64_t imm64 = (Bit(19)*(1LL << 63)) | (((1LL << 8) - Bit(18)) << 54) |
(Bits(16, 2)*(1LL << 52)) | (Bits(0, 4)*(1LL << 48));
return bit_cast<double, uint64_t>(imm64);
}
// Test for data processing instructions of type 0 or 1.
// See "ARM Architecture Reference Manual ARMv7-A and ARMv7-R edition",
// section A5.1 "ARM instruction set encoding".
bool IsDataProcessing() const {
CHECK_NE(ConditionField(), kSpecialCondition);
CHECK_EQ(Bits(26, 2), 0); // Type 0 or 1.
return ((Bits(20, 5) & 0x19) != 0x10) &&
((Bit(25) == 1) || // Data processing immediate.
(Bit(4) == 0) || // Data processing register.
(Bit(7) == 0)); // Data processing register-shifted register.
}
// Tests for special encodings of type 0 instructions (extra loads and stores,
// as well as multiplications, synchronization primitives, and miscellaneous).
// Can only be called for a type 0 or 1 instruction.
bool IsMiscellaneous() const {
CHECK_EQ(Bits(26, 2), 0); // Type 0 or 1.
return ((Bit(25) == 0) && ((Bits(20, 5) & 0x19) == 0x10) && (Bit(7) == 0));
}
bool IsMultiplyOrSyncPrimitive() const {
CHECK_EQ(Bits(26, 2), 0); // Type 0 or 1.
return ((Bit(25) == 0) && (Bits(4, 4) == 9));
}
// Test for Supervisor Call instruction.
bool IsSvc() const {
return ((InstructionBits() & 0xff000000) == 0xef000000);
}
// Test for Breakpoint instruction.
bool IsBkpt() const {
return ((InstructionBits() & 0xfff000f0) == 0xe1200070);
}
// VFP register fields.
SRegister SnField() const {
return static_cast<SRegister>((Bits(kRnShift, kRnBits) << 1) + Bit(7));
}
SRegister SdField() const {
return static_cast<SRegister>((Bits(kRdShift, kRdBits) << 1) + Bit(22));
}
SRegister SmField() const {
return static_cast<SRegister>((Bits(kRmShift, kRmBits) << 1) + Bit(5));
}
DRegister DnField() const {
return static_cast<DRegister>(Bits(kRnShift, kRnBits) + (Bit(7) << 4));
}
DRegister DdField() const {
return static_cast<DRegister>(Bits(kRdShift, kRdBits) + (Bit(22) << 4));
}
DRegister DmField() const {
return static_cast<DRegister>(Bits(kRmShift, kRmBits) + (Bit(5) << 4));
}
// Test for VFP data processing or single transfer instructions of type 7.
bool IsVFPDataProcessingOrSingleTransfer() const {
CHECK_NE(ConditionField(), kSpecialCondition);
CHECK_EQ(TypeField(), 7);
return ((Bit(24) == 0) && (Bits(9, 3) == 5));
// Bit(4) == 0: Data Processing
// Bit(4) == 1: 8, 16, or 32-bit Transfer between ARM Core and VFP
}
// Test for VFP 64-bit transfer instructions of type 6.
bool IsVFPDoubleTransfer() const {
CHECK_NE(ConditionField(), kSpecialCondition);
CHECK_EQ(TypeField(), 6);
return ((Bits(21, 4) == 2) && (Bits(9, 3) == 5) &&
((Bits(4, 4) & 0xd) == 1));
}
// Test for VFP load and store instructions of type 6.
bool IsVFPLoadStore() const {
CHECK_NE(ConditionField(), kSpecialCondition);
CHECK_EQ(TypeField(), 6);
return ((Bits(20, 5) & 0x12) == 0x10) && (Bits(9, 3) == 5);
}
// Special accessors that test for existence of a value.
bool HasS() const { return SField() == 1; }
bool HasB() const { return BField() == 1; }
bool HasW() const { return WField() == 1; }
bool HasL() const { return LField() == 1; }
bool HasSign() const { return SignField() == 1; }
bool HasH() const { return HField() == 1; }
bool HasLink() const { return LinkField() == 1; }
// Instructions are read out of a code stream. The only way to get a
// reference to an instruction is to convert a pointer. There is no way
// to allocate or create instances of class Instr.
// Use the At(pc) function to create references to Instr.
static Instr* At(uword pc) { return reinterpret_cast<Instr*>(pc); }
Instr* Next() { return this + kInstrSize; }
private:
// We need to prevent the creation of instances of class Instr.
DISALLOW_IMPLICIT_CONSTRUCTORS(Instr);
};
} // namespace arm
} // namespace art
#endif // ART_COMPILER_UTILS_ARM_CONSTANTS_ARM_H_