C++程序
|
4179行
|
126.27 KB
/*
* Driver interface definition
* Copyright (c) 2003-2014, Jouni Malinen <j@w1.fi>
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*
* This file defines a driver interface used by both %wpa_supplicant and
* hostapd. The first part of the file defines data structures used in various
* driver operations. This is followed by the struct wpa_driver_ops that each
* driver wrapper will beed to define with callback functions for requesting
* driver operations. After this, there are definitions for driver event
* reporting with wpa_supplicant_event() and some convenience helper functions
* that can be used to report events.
*/
#ifndef DRIVER_H
#define DRIVER_H
#define WPA_SUPPLICANT_DRIVER_VERSION 4
#include "common/defs.h"
#include "utils/list.h"
#define HOSTAPD_CHAN_DISABLED 0x00000001
#define HOSTAPD_CHAN_PASSIVE_SCAN 0x00000002
#define HOSTAPD_CHAN_NO_IBSS 0x00000004
#define HOSTAPD_CHAN_RADAR 0x00000008
#define HOSTAPD_CHAN_HT40PLUS 0x00000010
#define HOSTAPD_CHAN_HT40MINUS 0x00000020
#define HOSTAPD_CHAN_HT40 0x00000040
#define HOSTAPD_CHAN_SURVEY_LIST_INITIALIZED 0x00000080
#define HOSTAPD_CHAN_DFS_UNKNOWN 0x00000000
#define HOSTAPD_CHAN_DFS_USABLE 0x00000100
#define HOSTAPD_CHAN_DFS_UNAVAILABLE 0x00000200
#define HOSTAPD_CHAN_DFS_AVAILABLE 0x00000300
#define HOSTAPD_CHAN_DFS_MASK 0x00000300
#define HOSTAPD_CHAN_VHT_10_70 0x00000800
#define HOSTAPD_CHAN_VHT_30_50 0x00001000
#define HOSTAPD_CHAN_VHT_50_30 0x00002000
#define HOSTAPD_CHAN_VHT_70_10 0x00004000
enum reg_change_initiator {
REGDOM_SET_BY_CORE,
REGDOM_SET_BY_USER,
REGDOM_SET_BY_DRIVER,
REGDOM_SET_BY_COUNTRY_IE,
REGDOM_BEACON_HINT,
};
enum reg_type {
REGDOM_TYPE_UNKNOWN,
REGDOM_TYPE_COUNTRY,
REGDOM_TYPE_WORLD,
REGDOM_TYPE_CUSTOM_WORLD,
REGDOM_TYPE_INTERSECTION,
};
/**
* struct hostapd_channel_data - Channel information
*/
struct hostapd_channel_data {
/**
* chan - Channel number (IEEE 802.11)
*/
short chan;
/**
* freq - Frequency in MHz
*/
int freq;
/**
* flag - Channel flags (HOSTAPD_CHAN_*)
*/
int flag;
/**
* max_tx_power - Regulatory transmit power limit in dBm
*/
u8 max_tx_power;
/*
* survey_list - Linked list of surveys
*/
struct dl_list survey_list;
/**
* min_nf - Minimum observed noise floor, in dBm, based on all
* surveyed channel data
*/
s8 min_nf;
#ifdef CONFIG_ACS
/**
* interference_factor - Computed interference factor on this
* channel (used internally in src/ap/acs.c; driver wrappers do not
* need to set this)
*/
long double interference_factor;
#endif /* CONFIG_ACS */
/* DFS CAC time in milliseconds */
unsigned int dfs_cac_ms;
};
#define HOSTAPD_MODE_FLAG_HT_INFO_KNOWN BIT(0)
#define HOSTAPD_MODE_FLAG_VHT_INFO_KNOWN BIT(1)
/**
* struct hostapd_hw_modes - Supported hardware mode information
*/
struct hostapd_hw_modes {
/**
* mode - Hardware mode
*/
enum hostapd_hw_mode mode;
/**
* num_channels - Number of entries in the channels array
*/
int num_channels;
/**
* channels - Array of supported channels
*/
struct hostapd_channel_data *channels;
/**
* num_rates - Number of entries in the rates array
*/
int num_rates;
/**
* rates - Array of supported rates in 100 kbps units
*/
int *rates;
/**
* ht_capab - HT (IEEE 802.11n) capabilities
*/
u16 ht_capab;
/**
* mcs_set - MCS (IEEE 802.11n) rate parameters
*/
u8 mcs_set[16];
/**
* a_mpdu_params - A-MPDU (IEEE 802.11n) parameters
*/
u8 a_mpdu_params;
/**
* vht_capab - VHT (IEEE 802.11ac) capabilities
*/
u32 vht_capab;
/**
* vht_mcs_set - VHT MCS (IEEE 802.11ac) rate parameters
*/
u8 vht_mcs_set[8];
unsigned int flags; /* HOSTAPD_MODE_FLAG_* */
};
#define IEEE80211_MODE_INFRA 0
#define IEEE80211_MODE_IBSS 1
#define IEEE80211_MODE_AP 2
#define IEEE80211_CAP_ESS 0x0001
#define IEEE80211_CAP_IBSS 0x0002
#define IEEE80211_CAP_PRIVACY 0x0010
/* DMG (60 GHz) IEEE 802.11ad */
/* type - bits 0..1 */
#define IEEE80211_CAP_DMG_MASK 0x0003
#define IEEE80211_CAP_DMG_IBSS 0x0001 /* Tx by: STA */
#define IEEE80211_CAP_DMG_PBSS 0x0002 /* Tx by: PCP */
#define IEEE80211_CAP_DMG_AP 0x0003 /* Tx by: AP */
#define WPA_SCAN_QUAL_INVALID BIT(0)
#define WPA_SCAN_NOISE_INVALID BIT(1)
#define WPA_SCAN_LEVEL_INVALID BIT(2)
#define WPA_SCAN_LEVEL_DBM BIT(3)
#define WPA_SCAN_AUTHENTICATED BIT(4)
#define WPA_SCAN_ASSOCIATED BIT(5)
/**
* struct wpa_scan_res - Scan result for an BSS/IBSS
* @flags: information flags about the BSS/IBSS (WPA_SCAN_*)
* @bssid: BSSID
* @freq: frequency of the channel in MHz (e.g., 2412 = channel 1)
* @beacon_int: beacon interval in TUs (host byte order)
* @caps: capability information field in host byte order
* @qual: signal quality
* @noise: noise level
* @level: signal level
* @tsf: Timestamp
* @age: Age of the information in milliseconds (i.e., how many milliseconds
* ago the last Beacon or Probe Response frame was received)
* @ie_len: length of the following IE field in octets
* @beacon_ie_len: length of the following Beacon IE field in octets
*
* This structure is used as a generic format for scan results from the
* driver. Each driver interface implementation is responsible for converting
* the driver or OS specific scan results into this format.
*
* If the driver does not support reporting all IEs, the IE data structure is
* constructed of the IEs that are available. This field will also need to
* include SSID in IE format. All drivers are encouraged to be extended to
* report all IEs to make it easier to support future additions.
*/
struct wpa_scan_res {
unsigned int flags;
u8 bssid[ETH_ALEN];
int freq;
u16 beacon_int;
u16 caps;
int qual;
int noise;
int level;
u64 tsf;
unsigned int age;
size_t ie_len;
size_t beacon_ie_len;
/*
* Followed by ie_len octets of IEs from Probe Response frame (or if
* the driver does not indicate source of IEs, these may also be from
* Beacon frame). After the first set of IEs, another set of IEs may
* follow (with beacon_ie_len octets of data) if the driver provides
* both IE sets.
*/
};
/**
* struct wpa_scan_results - Scan results
* @res: Array of pointers to allocated variable length scan result entries
* @num: Number of entries in the scan result array
* @fetch_time: Time when the results were fetched from the driver
*/
struct wpa_scan_results {
struct wpa_scan_res **res;
size_t num;
struct os_reltime fetch_time;
};
/**
* struct wpa_interface_info - Network interface information
* @next: Pointer to the next interface or NULL if this is the last one
* @ifname: Interface name that can be used with init() or init2()
* @desc: Human readable adapter description (e.g., vendor/model) or NULL if
* not available
* @drv_name: struct wpa_driver_ops::name (note: unlike other strings, this one
* is not an allocated copy, i.e., get_interfaces() caller will not free
* this)
*/
struct wpa_interface_info {
struct wpa_interface_info *next;
char *ifname;
char *desc;
const char *drv_name;
};
#define WPAS_MAX_SCAN_SSIDS 16
/**
* struct wpa_driver_scan_params - Scan parameters
* Data for struct wpa_driver_ops::scan2().
*/
struct wpa_driver_scan_params {
/**
* ssids - SSIDs to scan for
*/
struct wpa_driver_scan_ssid {
/**
* ssid - specific SSID to scan for (ProbeReq)
* %NULL or zero-length SSID is used to indicate active scan
* with wildcard SSID.
*/
const u8 *ssid;
/**
* ssid_len: Length of the SSID in octets
*/
size_t ssid_len;
} ssids[WPAS_MAX_SCAN_SSIDS];
/**
* num_ssids - Number of entries in ssids array
* Zero indicates a request for a passive scan.
*/
size_t num_ssids;
/**
* extra_ies - Extra IE(s) to add into Probe Request or %NULL
*/
const u8 *extra_ies;
/**
* extra_ies_len - Length of extra_ies in octets
*/
size_t extra_ies_len;
/**
* freqs - Array of frequencies to scan or %NULL for all frequencies
*
* The frequency is set in MHz. The array is zero-terminated.
*/
int *freqs;
/**
* filter_ssids - Filter for reporting SSIDs
*
* This optional parameter can be used to request the driver wrapper to
* filter scan results to include only the specified SSIDs. %NULL
* indicates that no filtering is to be done. This can be used to
* reduce memory needs for scan results in environments that have large
* number of APs with different SSIDs.
*
* The driver wrapper is allowed to take this allocated buffer into its
* own use by setting the pointer to %NULL. In that case, the driver
* wrapper is responsible for freeing the buffer with os_free() once it
* is not needed anymore.
*/
struct wpa_driver_scan_filter {
u8 ssid[32];
size_t ssid_len;
} *filter_ssids;
/**
* num_filter_ssids - Number of entries in filter_ssids array
*/
size_t num_filter_ssids;
/**
* filter_rssi - Filter by RSSI
*
* The driver may filter scan results in firmware to reduce host
* wakeups and thereby save power. Specify the RSSI threshold in s32
* dBm.
*/
s32 filter_rssi;
/**
* p2p_probe - Used to disable CCK (802.11b) rates for P2P probes
*
* When set, the driver is expected to remove rates 1, 2, 5.5, and 11
* Mbps from the support rates element(s) in the Probe Request frames
* and not to transmit the frames at any of those rates.
*/
unsigned int p2p_probe:1;
/**
* only_new_results - Request driver to report only new results
*
* This is used to request the driver to report only BSSes that have
* been detected after this scan request has been started, i.e., to
* flush old cached BSS entries.
*/
unsigned int only_new_results:1;
/**
* low_priority - Requests driver to use a lower scan priority
*
* This is used to request the driver to use a lower scan priority
* if it supports such a thing.
*/
unsigned int low_priority:1;
/*
* NOTE: Whenever adding new parameters here, please make sure
* wpa_scan_clone_params() and wpa_scan_free_params() get updated with
* matching changes.
*/
};
/**
* struct wpa_driver_auth_params - Authentication parameters
* Data for struct wpa_driver_ops::authenticate().
*/
struct wpa_driver_auth_params {
int freq;
const u8 *bssid;
const u8 *ssid;
size_t ssid_len;
int auth_alg;
const u8 *ie;
size_t ie_len;
const u8 *wep_key[4];
size_t wep_key_len[4];
int wep_tx_keyidx;
int local_state_change;
/**
* p2p - Whether this connection is a P2P group
*/
int p2p;
const u8 *sae_data;
size_t sae_data_len;
};
enum wps_mode {
WPS_MODE_NONE /* no WPS provisioning being used */,
WPS_MODE_OPEN /* WPS provisioning with AP that is in open mode */,
WPS_MODE_PRIVACY /* WPS provisioning with AP that is using protection
*/
};
/**
* struct wpa_driver_associate_params - Association parameters
* Data for struct wpa_driver_ops::associate().
*/
struct wpa_driver_associate_params {
/**
* bssid - BSSID of the selected AP
* This can be %NULL, if ap_scan=2 mode is used and the driver is
* responsible for selecting with which BSS to associate. */
const u8 *bssid;
/**
* bssid_hint - BSSID of a proposed AP
*
* This indicates which BSS has been found a suitable candidate for
* initial association for drivers that use driver/firmwate-based BSS
* selection. Unlike the @bssid parameter, @bssid_hint does not limit
* the driver from selecting other BSSes in the ESS.
*/
const u8 *bssid_hint;
/**
* ssid - The selected SSID
*/
const u8 *ssid;
/**
* ssid_len - Length of the SSID (1..32)
*/
size_t ssid_len;
/**
* freq - Frequency of the channel the selected AP is using
* Frequency that the selected AP is using (in MHz as
* reported in the scan results)
*/
int freq;
/**
* freq_hint - Frequency of the channel the proposed AP is using
*
* This provides a channel on which a suitable BSS has been found as a
* hint for the driver. Unlike the @freq parameter, @freq_hint does not
* limit the driver from selecting other channels for
* driver/firmware-based BSS selection.
*/
int freq_hint;
/**
* bg_scan_period - Background scan period in seconds, 0 to disable
* background scan, or -1 to indicate no change to default driver
* configuration
*/
int bg_scan_period;
/**
* beacon_int - Beacon interval for IBSS or 0 to use driver default
*/
int beacon_int;
/**
* wpa_ie - WPA information element for (Re)Association Request
* WPA information element to be included in (Re)Association
* Request (including information element id and length). Use
* of this WPA IE is optional. If the driver generates the WPA
* IE, it can use pairwise_suite, group_suite, and
* key_mgmt_suite to select proper algorithms. In this case,
* the driver has to notify wpa_supplicant about the used WPA
* IE by generating an event that the interface code will
* convert into EVENT_ASSOCINFO data (see below).
*
* When using WPA2/IEEE 802.11i, wpa_ie is used for RSN IE
* instead. The driver can determine which version is used by
* looking at the first byte of the IE (0xdd for WPA, 0x30 for
* WPA2/RSN).
*
* When using WPS, wpa_ie is used for WPS IE instead of WPA/RSN IE.
*/
const u8 *wpa_ie;
/**
* wpa_ie_len - length of the wpa_ie
*/
size_t wpa_ie_len;
/**
* wpa_proto - Bitfield of WPA_PROTO_* values to indicate WPA/WPA2
*/
unsigned int wpa_proto;
/**
* pairwise_suite - Selected pairwise cipher suite (WPA_CIPHER_*)
*
* This is usually ignored if @wpa_ie is used.
*/
unsigned int pairwise_suite;
/**
* group_suite - Selected group cipher suite (WPA_CIPHER_*)
*
* This is usually ignored if @wpa_ie is used.
*/
unsigned int group_suite;
/**
* key_mgmt_suite - Selected key management suite (WPA_KEY_MGMT_*)
*
* This is usually ignored if @wpa_ie is used.
*/
unsigned int key_mgmt_suite;
/**
* auth_alg - Allowed authentication algorithms
* Bit field of WPA_AUTH_ALG_*
*/
int auth_alg;
/**
* mode - Operation mode (infra/ibss) IEEE80211_MODE_*
*/
int mode;
/**
* wep_key - WEP keys for static WEP configuration
*/
const u8 *wep_key[4];
/**
* wep_key_len - WEP key length for static WEP configuration
*/
size_t wep_key_len[4];
/**
* wep_tx_keyidx - WEP TX key index for static WEP configuration
*/
int wep_tx_keyidx;
/**
* mgmt_frame_protection - IEEE 802.11w management frame protection
*/
enum mfp_options mgmt_frame_protection;
/**
* ft_ies - IEEE 802.11r / FT information elements
* If the supplicant is using IEEE 802.11r (FT) and has the needed keys
* for fast transition, this parameter is set to include the IEs that
* are to be sent in the next FT Authentication Request message.
* update_ft_ies() handler is called to update the IEs for further
* FT messages in the sequence.
*
* The driver should use these IEs only if the target AP is advertising
* the same mobility domain as the one included in the MDIE here.
*
* In ap_scan=2 mode, the driver can use these IEs when moving to a new
* AP after the initial association. These IEs can only be used if the
* target AP is advertising support for FT and is using the same MDIE
* and SSID as the current AP.
*
* The driver is responsible for reporting the FT IEs received from the
* AP's response using wpa_supplicant_event() with EVENT_FT_RESPONSE
* type. update_ft_ies() handler will then be called with the FT IEs to
* include in the next frame in the authentication sequence.
*/
const u8 *ft_ies;
/**
* ft_ies_len - Length of ft_ies in bytes
*/
size_t ft_ies_len;
/**
* ft_md - FT Mobility domain (6 octets) (also included inside ft_ies)
*
* This value is provided to allow the driver interface easier access
* to the current mobility domain. This value is set to %NULL if no
* mobility domain is currently active.
*/
const u8 *ft_md;
/**
* passphrase - RSN passphrase for PSK
*
* This value is made available only for WPA/WPA2-Personal (PSK) and
* only for drivers that set WPA_DRIVER_FLAGS_4WAY_HANDSHAKE. This is
* the 8..63 character ASCII passphrase, if available. Please note that
* this can be %NULL if passphrase was not used to generate the PSK. In
* that case, the psk field must be used to fetch the PSK.
*/
const char *passphrase;
/**
* psk - RSN PSK (alternative for passphrase for PSK)
*
* This value is made available only for WPA/WPA2-Personal (PSK) and
* only for drivers that set WPA_DRIVER_FLAGS_4WAY_HANDSHAKE. This is
* the 32-octet (256-bit) PSK, if available. The driver wrapper should
* be prepared to handle %NULL value as an error.
*/
const u8 *psk;
/**
* drop_unencrypted - Enable/disable unencrypted frame filtering
*
* Configure the driver to drop all non-EAPOL frames (both receive and
* transmit paths). Unencrypted EAPOL frames (ethertype 0x888e) must
* still be allowed for key negotiation.
*/
int drop_unencrypted;
/**
* prev_bssid - Previously used BSSID in this ESS
*
* When not %NULL, this is a request to use reassociation instead of
* association.
*/
const u8 *prev_bssid;
/**
* wps - WPS mode
*
* If the driver needs to do special configuration for WPS association,
* this variable provides more information on what type of association
* is being requested. Most drivers should not need ot use this.
*/
enum wps_mode wps;
/**
* p2p - Whether this connection is a P2P group
*/
int p2p;
/**
* uapsd - UAPSD parameters for the network
* -1 = do not change defaults
* AP mode: 1 = enabled, 0 = disabled
* STA mode: bits 0..3 UAPSD enabled for VO,VI,BK,BE
*/
int uapsd;
/**
* fixed_bssid - Whether to force this BSSID in IBSS mode
* 1 = Fix this BSSID and prevent merges.
* 0 = Do not fix BSSID.
*/
int fixed_bssid;
/**
* disable_ht - Disable HT (IEEE 802.11n) for this connection
*/
int disable_ht;
/**
* HT Capabilities over-rides. Only bits set in the mask will be used,
* and not all values are used by the kernel anyway. Currently, MCS,
* MPDU and MSDU fields are used.
*/
const u8 *htcaps; /* struct ieee80211_ht_capabilities * */
const u8 *htcaps_mask; /* struct ieee80211_ht_capabilities * */
#ifdef CONFIG_VHT_OVERRIDES
/**
* disable_vht - Disable VHT for this connection
*/
int disable_vht;
/**
* VHT capability overrides.
*/
const struct ieee80211_vht_capabilities *vhtcaps;
const struct ieee80211_vht_capabilities *vhtcaps_mask;
#endif /* CONFIG_VHT_OVERRIDES */
};
enum hide_ssid {
NO_SSID_HIDING,
HIDDEN_SSID_ZERO_LEN,
HIDDEN_SSID_ZERO_CONTENTS
};
struct wowlan_triggers {
u8 any;
u8 disconnect;
u8 magic_pkt;
u8 gtk_rekey_failure;
u8 eap_identity_req;
u8 four_way_handshake;
u8 rfkill_release;
};
struct wpa_driver_ap_params {
/**
* head - Beacon head from IEEE 802.11 header to IEs before TIM IE
*/
u8 *head;
/**
* head_len - Length of the head buffer in octets
*/
size_t head_len;
/**
* tail - Beacon tail following TIM IE
*/
u8 *tail;
/**
* tail_len - Length of the tail buffer in octets
*/
size_t tail_len;
/**
* dtim_period - DTIM period
*/
int dtim_period;
/**
* beacon_int - Beacon interval
*/
int beacon_int;
/**
* basic_rates: -1 terminated array of basic rates in 100 kbps
*
* This parameter can be used to set a specific basic rate set for the
* BSS. If %NULL, default basic rate set is used.
*/
int *basic_rates;
/**
* proberesp - Probe Response template
*
* This is used by drivers that reply to Probe Requests internally in
* AP mode and require the full Probe Response template.
*/
u8 *proberesp;
/**
* proberesp_len - Length of the proberesp buffer in octets
*/
size_t proberesp_len;
/**
* ssid - The SSID to use in Beacon/Probe Response frames
*/
const u8 *ssid;
/**
* ssid_len - Length of the SSID (1..32)
*/
size_t ssid_len;
/**
* hide_ssid - Whether to hide the SSID
*/
enum hide_ssid hide_ssid;
/**
* pairwise_ciphers - WPA_CIPHER_* bitfield
*/
unsigned int pairwise_ciphers;
/**
* group_cipher - WPA_CIPHER_*
*/
unsigned int group_cipher;
/**
* key_mgmt_suites - WPA_KEY_MGMT_* bitfield
*/
unsigned int key_mgmt_suites;
/**
* auth_algs - WPA_AUTH_ALG_* bitfield
*/
unsigned int auth_algs;
/**
* wpa_version - WPA_PROTO_* bitfield
*/
unsigned int wpa_version;
/**
* privacy - Whether privacy is used in the BSS
*/
int privacy;
/**
* beacon_ies - WPS/P2P IE(s) for Beacon frames
*
* This is used to add IEs like WPS IE and P2P IE by drivers that do
* not use the full Beacon template.
*/
const struct wpabuf *beacon_ies;
/**
* proberesp_ies - P2P/WPS IE(s) for Probe Response frames
*
* This is used to add IEs like WPS IE and P2P IE by drivers that
* reply to Probe Request frames internally.
*/
const struct wpabuf *proberesp_ies;
/**
* assocresp_ies - WPS IE(s) for (Re)Association Response frames
*
* This is used to add IEs like WPS IE by drivers that reply to
* (Re)Association Request frames internally.
*/
const struct wpabuf *assocresp_ies;
/**
* isolate - Whether to isolate frames between associated stations
*
* If this is non-zero, the AP is requested to disable forwarding of
* frames between associated stations.
*/
int isolate;
/**
* cts_protect - Whether CTS protection is enabled
*/
int cts_protect;
/**
* preamble - Whether short preamble is enabled
*/
int preamble;
/**
* short_slot_time - Whether short slot time is enabled
*
* 0 = short slot time disable, 1 = short slot time enabled, -1 = do
* not set (e.g., when 802.11g mode is not in use)
*/
int short_slot_time;
/**
* ht_opmode - HT operation mode or -1 if HT not in use
*/
int ht_opmode;
/**
* interworking - Whether Interworking is enabled
*/
int interworking;
/**
* hessid - Homogeneous ESS identifier or %NULL if not set
*/
const u8 *hessid;
/**
* access_network_type - Access Network Type (0..15)
*
* This is used for filtering Probe Request frames when Interworking is
* enabled.
*/
u8 access_network_type;
/**
* ap_max_inactivity - Timeout in seconds to detect STA's inactivity
*
* This is used by driver which advertises this capability.
*/
int ap_max_inactivity;
/**
* disable_dgaf - Whether group-addressed frames are disabled
*/
int disable_dgaf;
/**
* osen - Whether OSEN security is enabled
*/
int osen;
/**
* freq - Channel parameters for dynamic bandwidth changes
*/
struct hostapd_freq_params *freq;
};
/**
* struct wpa_driver_capa - Driver capability information
*/
struct wpa_driver_capa {
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA 0x00000001
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA2 0x00000002
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA_PSK 0x00000004
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA2_PSK 0x00000008
#define WPA_DRIVER_CAPA_KEY_MGMT_WPA_NONE 0x00000010
#define WPA_DRIVER_CAPA_KEY_MGMT_FT 0x00000020
#define WPA_DRIVER_CAPA_KEY_MGMT_FT_PSK 0x00000040
#define WPA_DRIVER_CAPA_KEY_MGMT_WAPI_PSK 0x00000080
unsigned int key_mgmt;
#define WPA_DRIVER_CAPA_ENC_WEP40 0x00000001
#define WPA_DRIVER_CAPA_ENC_WEP104 0x00000002
#define WPA_DRIVER_CAPA_ENC_TKIP 0x00000004
#define WPA_DRIVER_CAPA_ENC_CCMP 0x00000008
#define WPA_DRIVER_CAPA_ENC_WEP128 0x00000010
#define WPA_DRIVER_CAPA_ENC_GCMP 0x00000020
#define WPA_DRIVER_CAPA_ENC_GCMP_256 0x00000040
#define WPA_DRIVER_CAPA_ENC_CCMP_256 0x00000080
#define WPA_DRIVER_CAPA_ENC_BIP 0x00000100
#define WPA_DRIVER_CAPA_ENC_BIP_GMAC_128 0x00000200
#define WPA_DRIVER_CAPA_ENC_BIP_GMAC_256 0x00000400
#define WPA_DRIVER_CAPA_ENC_BIP_CMAC_256 0x00000800
#define WPA_DRIVER_CAPA_ENC_GTK_NOT_USED 0x00001000
unsigned int enc;
#define WPA_DRIVER_AUTH_OPEN 0x00000001
#define WPA_DRIVER_AUTH_SHARED 0x00000002
#define WPA_DRIVER_AUTH_LEAP 0x00000004
unsigned int auth;
/* Driver generated WPA/RSN IE */
#define WPA_DRIVER_FLAGS_DRIVER_IE 0x00000001
/* Driver needs static WEP key setup after association command */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC 0x00000002
/* Driver takes care of all DFS operations */
#define WPA_DRIVER_FLAGS_DFS_OFFLOAD 0x00000004
/* Driver takes care of RSN 4-way handshake internally; PMK is configured with
* struct wpa_driver_ops::set_key using alg = WPA_ALG_PMK */
#define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE 0x00000008
#define WPA_DRIVER_FLAGS_WIRED 0x00000010
/* Driver provides separate commands for authentication and association (SME in
* wpa_supplicant). */
#define WPA_DRIVER_FLAGS_SME 0x00000020
/* Driver supports AP mode */
#define WPA_DRIVER_FLAGS_AP 0x00000040
/* Driver needs static WEP key setup after association has been completed */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE 0x00000080
/* Driver supports dynamic HT 20/40 MHz channel changes during BSS lifetime */
#define WPA_DRIVER_FLAGS_HT_2040_COEX 0x00000100
/* Driver supports concurrent P2P operations */
#define WPA_DRIVER_FLAGS_P2P_CONCURRENT 0x00000200
/*
* Driver uses the initial interface as a dedicated management interface, i.e.,
* it cannot be used for P2P group operations or non-P2P purposes.
*/
#define WPA_DRIVER_FLAGS_P2P_DEDICATED_INTERFACE 0x00000400
/* This interface is P2P capable (P2P GO or P2P Client) */
#define WPA_DRIVER_FLAGS_P2P_CAPABLE 0x00000800
/* Driver supports station and key removal when stopping an AP */
#define WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT 0x00001000
/*
* Driver uses the initial interface for P2P management interface and non-P2P
* purposes (e.g., connect to infra AP), but this interface cannot be used for
* P2P group operations.
*/
#define WPA_DRIVER_FLAGS_P2P_MGMT_AND_NON_P2P 0x00002000
/*
* Driver is known to use sane error codes, i.e., when it indicates that
* something (e.g., association) fails, there was indeed a failure and the
* operation does not end up getting completed successfully later.
*/
#define WPA_DRIVER_FLAGS_SANE_ERROR_CODES 0x00004000
/* Driver supports off-channel TX */
#define WPA_DRIVER_FLAGS_OFFCHANNEL_TX 0x00008000
/* Driver indicates TX status events for EAPOL Data frames */
#define WPA_DRIVER_FLAGS_EAPOL_TX_STATUS 0x00010000
/* Driver indicates TX status events for Deauth/Disassoc frames */
#define WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS 0x00020000
/* Driver supports roaming (BSS selection) in firmware */
#define WPA_DRIVER_FLAGS_BSS_SELECTION 0x00040000
/* Driver supports operating as a TDLS peer */
#define WPA_DRIVER_FLAGS_TDLS_SUPPORT 0x00080000
/* Driver requires external TDLS setup/teardown/discovery */
#define WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP 0x00100000
/* Driver indicates support for Probe Response offloading in AP mode */
#define WPA_DRIVER_FLAGS_PROBE_RESP_OFFLOAD 0x00200000
/* Driver supports U-APSD in AP mode */
#define WPA_DRIVER_FLAGS_AP_UAPSD 0x00400000
/* Driver supports inactivity timer in AP mode */
#define WPA_DRIVER_FLAGS_INACTIVITY_TIMER 0x00800000
/* Driver expects user space implementation of MLME in AP mode */
#define WPA_DRIVER_FLAGS_AP_MLME 0x01000000
/* Driver supports SAE with user space SME */
#define WPA_DRIVER_FLAGS_SAE 0x02000000
/* Driver makes use of OBSS scan mechanism in wpa_supplicant */
#define WPA_DRIVER_FLAGS_OBSS_SCAN 0x04000000
/* Driver supports IBSS (Ad-hoc) mode */
#define WPA_DRIVER_FLAGS_IBSS 0x08000000
/* Driver supports radar detection */
#define WPA_DRIVER_FLAGS_RADAR 0x10000000
/* Driver supports a dedicated interface for P2P Device */
#define WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE 0x20000000
/* Driver supports QoS Mapping */
#define WPA_DRIVER_FLAGS_QOS_MAPPING 0x40000000
/* Driver supports CSA in AP mode */
#define WPA_DRIVER_FLAGS_AP_CSA 0x80000000
unsigned int flags;
int max_scan_ssids;
int max_sched_scan_ssids;
int sched_scan_supported;
int max_match_sets;
/**
* max_remain_on_chan - Maximum remain-on-channel duration in msec
*/
unsigned int max_remain_on_chan;
/**
* max_stations - Maximum number of associated stations the driver
* supports in AP mode
*/
unsigned int max_stations;
/**
* probe_resp_offloads - Bitmap of supported protocols by the driver
* for Probe Response offloading.
*/
/* Driver Probe Response offloading support for WPS ver. 1 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS 0x00000001
/* Driver Probe Response offloading support for WPS ver. 2 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS2 0x00000002
/* Driver Probe Response offloading support for P2P */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_P2P 0x00000004
/* Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_INTERWORKING 0x00000008
unsigned int probe_resp_offloads;
unsigned int max_acl_mac_addrs;
/**
* Number of supported concurrent channels
*/
unsigned int num_multichan_concurrent;
/**
* extended_capa - extended capabilities in driver/device
*
* Must be allocated and freed by driver and the pointers must be
* valid for the lifetime of the driver, i.e., freed in deinit()
*/
const u8 *extended_capa, *extended_capa_mask;
unsigned int extended_capa_len;
struct wowlan_triggers wowlan_triggers;
};
struct hostapd_data;
struct hostap_sta_driver_data {
unsigned long rx_packets, tx_packets, rx_bytes, tx_bytes;
unsigned long current_tx_rate;
unsigned long inactive_msec;
unsigned long flags;
unsigned long num_ps_buf_frames;
unsigned long tx_retry_failed;
unsigned long tx_retry_count;
int last_rssi;
int last_ack_rssi;
};
struct hostapd_sta_add_params {
const u8 *addr;
u16 aid;
u16 capability;
const u8 *supp_rates;
size_t supp_rates_len;
u16 listen_interval;
const struct ieee80211_ht_capabilities *ht_capabilities;
const struct ieee80211_vht_capabilities *vht_capabilities;
int vht_opmode_enabled;
u8 vht_opmode;
u32 flags; /* bitmask of WPA_STA_* flags */
int set; /* Set STA parameters instead of add */
u8 qosinfo;
const u8 *ext_capab;
size_t ext_capab_len;
const u8 *supp_channels;
size_t supp_channels_len;
const u8 *supp_oper_classes;
size_t supp_oper_classes_len;
};
struct hostapd_freq_params {
int mode;
int freq;
int channel;
/* for HT */
int ht_enabled;
int sec_channel_offset; /* 0 = HT40 disabled, -1 = HT40 enabled,
* secondary channel below primary, 1 = HT40
* enabled, secondary channel above primary */
/* for VHT */
int vht_enabled;
/* valid for both HT and VHT, center_freq2 is non-zero
* only for bandwidth 80 and an 80+80 channel */
int center_freq1, center_freq2;
int bandwidth;
};
struct mac_address {
u8 addr[ETH_ALEN];
};
struct hostapd_acl_params {
u8 acl_policy;
unsigned int num_mac_acl;
struct mac_address mac_acl[0];
};
enum wpa_driver_if_type {
/**
* WPA_IF_STATION - Station mode interface
*/
WPA_IF_STATION,
/**
* WPA_IF_AP_VLAN - AP mode VLAN interface
*
* This interface shares its address and Beacon frame with the main
* BSS.
*/
WPA_IF_AP_VLAN,
/**
* WPA_IF_AP_BSS - AP mode BSS interface
*
* This interface has its own address and Beacon frame.
*/
WPA_IF_AP_BSS,
/**
* WPA_IF_P2P_GO - P2P Group Owner
*/
WPA_IF_P2P_GO,
/**
* WPA_IF_P2P_CLIENT - P2P Client
*/
WPA_IF_P2P_CLIENT,
/**
* WPA_IF_P2P_GROUP - P2P Group interface (will become either
* WPA_IF_P2P_GO or WPA_IF_P2P_CLIENT, but the role is not yet known)
*/
WPA_IF_P2P_GROUP,
/**
* WPA_IF_P2P_DEVICE - P2P Device interface is used to indentify the
* abstracted P2P Device function in the driver
*/
WPA_IF_P2P_DEVICE
};
struct wpa_init_params {
void *global_priv;
const u8 *bssid;
const char *ifname;
const u8 *ssid;
size_t ssid_len;
const char *test_socket;
int use_pae_group_addr;
char **bridge;
size_t num_bridge;
u8 *own_addr; /* buffer for writing own MAC address */
};
struct wpa_bss_params {
/** Interface name (for multi-SSID/VLAN support) */
const char *ifname;
/** Whether IEEE 802.1X or WPA/WPA2 is enabled */
int enabled;
int wpa;
int ieee802_1x;
int wpa_group;
int wpa_pairwise;
int wpa_key_mgmt;
int rsn_preauth;
enum mfp_options ieee80211w;
};
#define WPA_STA_AUTHORIZED BIT(0)
#define WPA_STA_WMM BIT(1)
#define WPA_STA_SHORT_PREAMBLE BIT(2)
#define WPA_STA_MFP BIT(3)
#define WPA_STA_TDLS_PEER BIT(4)
enum tdls_oper {
TDLS_DISCOVERY_REQ,
TDLS_SETUP,
TDLS_TEARDOWN,
TDLS_ENABLE_LINK,
TDLS_DISABLE_LINK,
TDLS_ENABLE,
TDLS_DISABLE
};
enum wnm_oper {
WNM_SLEEP_ENTER_CONFIRM,
WNM_SLEEP_ENTER_FAIL,
WNM_SLEEP_EXIT_CONFIRM,
WNM_SLEEP_EXIT_FAIL,
WNM_SLEEP_TFS_REQ_IE_ADD, /* STA requests driver to add TFS req IE */
WNM_SLEEP_TFS_REQ_IE_NONE, /* STA requests empty TFS req IE */
WNM_SLEEP_TFS_REQ_IE_SET, /* AP requests driver to set TFS req IE for
* a STA */
WNM_SLEEP_TFS_RESP_IE_ADD, /* AP requests driver to add TFS resp IE
* for a STA */
WNM_SLEEP_TFS_RESP_IE_NONE, /* AP requests empty TFS resp IE */
WNM_SLEEP_TFS_RESP_IE_SET, /* AP requests driver to set TFS resp IE
* for a STA */
WNM_SLEEP_TFS_IE_DEL /* AP delete the TFS IE */
};
/* enum chan_width - Channel width definitions */
enum chan_width {
CHAN_WIDTH_20_NOHT,
CHAN_WIDTH_20,
CHAN_WIDTH_40,
CHAN_WIDTH_80,
CHAN_WIDTH_80P80,
CHAN_WIDTH_160,
CHAN_WIDTH_UNKNOWN
};
/**
* struct wpa_signal_info - Information about channel signal quality
*/
struct wpa_signal_info {
u32 frequency;
int above_threshold;
int current_signal;
int avg_signal;
int current_noise;
int current_txrate;
enum chan_width chanwidth;
int center_frq1;
int center_frq2;
};
/**
* struct beacon_data - Beacon data
* @head: Head portion of Beacon frame (before TIM IE)
* @tail: Tail portion of Beacon frame (after TIM IE)
* @beacon_ies: Extra information element(s) to add into Beacon frames or %NULL
* @proberesp_ies: Extra information element(s) to add into Probe Response
* frames or %NULL
* @assocresp_ies: Extra information element(s) to add into (Re)Association
* Response frames or %NULL
* @probe_resp: Probe Response frame template
* @head_len: Length of @head
* @tail_len: Length of @tail
* @beacon_ies_len: Length of beacon_ies in octets
* @proberesp_ies_len: Length of proberesp_ies in octets
* @proberesp_ies_len: Length of proberesp_ies in octets
* @probe_resp_len: Length of probe response template (@probe_resp)
*/
struct beacon_data {
u8 *head, *tail;
u8 *beacon_ies;
u8 *proberesp_ies;
u8 *assocresp_ies;
u8 *probe_resp;
size_t head_len, tail_len;
size_t beacon_ies_len;
size_t proberesp_ies_len;
size_t assocresp_ies_len;
size_t probe_resp_len;
};
/**
* struct csa_settings - Settings for channel switch command
* @cs_count: Count in Beacon frames (TBTT) to perform the switch
* @block_tx: 1 - block transmission for CSA period
* @freq_params: Next channel frequency parameter
* @beacon_csa: Beacon/probe resp/asooc resp info for CSA period
* @beacon_after: Next beacon/probe resp/asooc resp info
* @counter_offset_beacon: Offset to the count field in beacon's tail
* @counter_offset_presp: Offset to the count field in probe resp.
*/
struct csa_settings {
u8 cs_count;
u8 block_tx;
struct hostapd_freq_params freq_params;
struct beacon_data beacon_csa;
struct beacon_data beacon_after;
u16 counter_offset_beacon;
u16 counter_offset_presp;
};
/* TDLS peer capabilities for send_tdls_mgmt() */
enum tdls_peer_capability {
TDLS_PEER_HT = BIT(0),
TDLS_PEER_VHT = BIT(1),
TDLS_PEER_WMM = BIT(2),
};
#ifdef CONFIG_MACSEC
struct macsec_init_params {
Boolean always_include_sci;
Boolean use_es;
Boolean use_scb;
};
#endif /* CONFIG_MACSEC */
/**
* struct wpa_driver_ops - Driver interface API definition
*
* This structure defines the API that each driver interface needs to implement
* for core wpa_supplicant code. All driver specific functionality is captured
* in this wrapper.
*/
struct wpa_driver_ops {
/** Name of the driver interface */
const char *name;
/** One line description of the driver interface */
const char *desc;
/**
* get_bssid - Get the current BSSID
* @priv: private driver interface data
* @bssid: buffer for BSSID (ETH_ALEN = 6 bytes)
*
* Returns: 0 on success, -1 on failure
*
* Query kernel driver for the current BSSID and copy it to bssid.
* Setting bssid to 00:00:00:00:00:00 is recommended if the STA is not
* associated.
*/
int (*get_bssid)(void *priv, u8 *bssid);
/**
* get_ssid - Get the current SSID
* @priv: private driver interface data
* @ssid: buffer for SSID (at least 32 bytes)
*
* Returns: Length of the SSID on success, -1 on failure
*
* Query kernel driver for the current SSID and copy it to ssid.
* Returning zero is recommended if the STA is not associated.
*
* Note: SSID is an array of octets, i.e., it is not nul terminated and
* can, at least in theory, contain control characters (including nul)
* and as such, should be processed as binary data, not a printable
* string.
*/
int (*get_ssid)(void *priv, u8 *ssid);
/**
* set_key - Configure encryption key
* @ifname: Interface name (for multi-SSID/VLAN support)
* @priv: private driver interface data
* @alg: encryption algorithm (%WPA_ALG_NONE, %WPA_ALG_WEP,
* %WPA_ALG_TKIP, %WPA_ALG_CCMP, %WPA_ALG_IGTK, %WPA_ALG_PMK,
* %WPA_ALG_GCMP, %WPA_ALG_GCMP_256, %WPA_ALG_CCMP_256,
* %WPA_ALG_BIP_GMAC_128, %WPA_ALG_BIP_GMAC_256,
* %WPA_ALG_BIP_CMAC_256);
* %WPA_ALG_NONE clears the key.
* @addr: Address of the peer STA (BSSID of the current AP when setting
* pairwise key in station mode), ff:ff:ff:ff:ff:ff for
* broadcast keys, %NULL for default keys that are used both for
* broadcast and unicast; when clearing keys, %NULL is used to
* indicate that both the broadcast-only and default key of the
* specified key index is to be cleared
* @key_idx: key index (0..3), usually 0 for unicast keys; 0..4095 for
* IGTK
* @set_tx: configure this key as the default Tx key (only used when
* driver does not support separate unicast/individual key
* @seq: sequence number/packet number, seq_len octets, the next
* packet number to be used for in replay protection; configured
* for Rx keys (in most cases, this is only used with broadcast
* keys and set to zero for unicast keys); %NULL if not set
* @seq_len: length of the seq, depends on the algorithm:
* TKIP: 6 octets, CCMP/GCMP: 6 octets, IGTK: 6 octets
* @key: key buffer; TKIP: 16-byte temporal key, 8-byte Tx Mic key,
* 8-byte Rx Mic Key
* @key_len: length of the key buffer in octets (WEP: 5 or 13,
* TKIP: 32, CCMP/GCMP: 16, IGTK: 16)
*
* Returns: 0 on success, -1 on failure
*
* Configure the given key for the kernel driver. If the driver
* supports separate individual keys (4 default keys + 1 individual),
* addr can be used to determine whether the key is default or
* individual. If only 4 keys are supported, the default key with key
* index 0 is used as the individual key. STA must be configured to use
* it as the default Tx key (set_tx is set) and accept Rx for all the
* key indexes. In most cases, WPA uses only key indexes 1 and 2 for
* broadcast keys, so key index 0 is available for this kind of
* configuration.
*
* Please note that TKIP keys include separate TX and RX MIC keys and
* some drivers may expect them in different order than wpa_supplicant
* is using. If the TX/RX keys are swapped, all TKIP encrypted packets
* will trigger Michael MIC errors. This can be fixed by changing the
* order of MIC keys by swapping te bytes 16..23 and 24..31 of the key
* in driver_*.c set_key() implementation, see driver_ndis.c for an
* example on how this can be done.
*/
int (*set_key)(const char *ifname, void *priv, enum wpa_alg alg,
const u8 *addr, int key_idx, int set_tx,
const u8 *seq, size_t seq_len,
const u8 *key, size_t key_len);
/**
* init - Initialize driver interface
* @ctx: context to be used when calling wpa_supplicant functions,
* e.g., wpa_supplicant_event()
* @ifname: interface name, e.g., wlan0
*
* Returns: Pointer to private data, %NULL on failure
*
* Initialize driver interface, including event processing for kernel
* driver events (e.g., associated, scan results, Michael MIC failure).
* This function can allocate a private configuration data area for
* @ctx, file descriptor, interface name, etc. information that may be
* needed in future driver operations. If this is not used, non-NULL
* value will need to be returned because %NULL is used to indicate
* failure. The returned value will be used as 'void *priv' data for
* all other driver_ops functions.
*
* The main event loop (eloop.c) of wpa_supplicant can be used to
* register callback for read sockets (eloop_register_read_sock()).
*
* See below for more information about events and
* wpa_supplicant_event() function.
*/
void * (*init)(void *ctx, const char *ifname);
/**
* deinit - Deinitialize driver interface
* @priv: private driver interface data from init()
*
* Shut down driver interface and processing of driver events. Free
* private data buffer if one was allocated in init() handler.
*/
void (*deinit)(void *priv);
/**
* set_param - Set driver configuration parameters
* @priv: private driver interface data from init()
* @param: driver specific configuration parameters
*
* Returns: 0 on success, -1 on failure
*
* Optional handler for notifying driver interface about configuration
* parameters (driver_param).
*/
int (*set_param)(void *priv, const char *param);
/**
* set_countermeasures - Enable/disable TKIP countermeasures
* @priv: private driver interface data
* @enabled: 1 = countermeasures enabled, 0 = disabled
*
* Returns: 0 on success, -1 on failure
*
* Configure TKIP countermeasures. When these are enabled, the driver
* should drop all received and queued frames that are using TKIP.
*/
int (*set_countermeasures)(void *priv, int enabled);
/**
* deauthenticate - Request driver to deauthenticate
* @priv: private driver interface data
* @addr: peer address (BSSID of the AP)
* @reason_code: 16-bit reason code to be sent in the deauthentication
* frame
*
* Returns: 0 on success, -1 on failure
*/
int (*deauthenticate)(void *priv, const u8 *addr, int reason_code);
/**
* associate - Request driver to associate
* @priv: private driver interface data
* @params: association parameters
*
* Returns: 0 on success, -1 on failure
*/
int (*associate)(void *priv,
struct wpa_driver_associate_params *params);
/**
* add_pmkid - Add PMKSA cache entry to the driver
* @priv: private driver interface data
* @bssid: BSSID for the PMKSA cache entry
* @pmkid: PMKID for the PMKSA cache entry
*
* Returns: 0 on success, -1 on failure
*
* This function is called when a new PMK is received, as a result of
* either normal authentication or RSN pre-authentication.
*
* If the driver generates RSN IE, i.e., it does not use wpa_ie in
* associate(), add_pmkid() can be used to add new PMKSA cache entries
* in the driver. If the driver uses wpa_ie from wpa_supplicant, this
* driver_ops function does not need to be implemented. Likewise, if
* the driver does not support WPA, this function is not needed.
*/
int (*add_pmkid)(void *priv, const u8 *bssid, const u8 *pmkid);
/**
* remove_pmkid - Remove PMKSA cache entry to the driver
* @priv: private driver interface data
* @bssid: BSSID for the PMKSA cache entry
* @pmkid: PMKID for the PMKSA cache entry
*
* Returns: 0 on success, -1 on failure
*
* This function is called when the supplicant drops a PMKSA cache
* entry for any reason.
*
* If the driver generates RSN IE, i.e., it does not use wpa_ie in
* associate(), remove_pmkid() can be used to synchronize PMKSA caches
* between the driver and wpa_supplicant. If the driver uses wpa_ie
* from wpa_supplicant, this driver_ops function does not need to be
* implemented. Likewise, if the driver does not support WPA, this
* function is not needed.
*/
int (*remove_pmkid)(void *priv, const u8 *bssid, const u8 *pmkid);
/**
* flush_pmkid - Flush PMKSA cache
* @priv: private driver interface data
*
* Returns: 0 on success, -1 on failure
*
* This function is called when the supplicant drops all PMKSA cache
* entries for any reason.
*
* If the driver generates RSN IE, i.e., it does not use wpa_ie in
* associate(), remove_pmkid() can be used to synchronize PMKSA caches
* between the driver and wpa_supplicant. If the driver uses wpa_ie
* from wpa_supplicant, this driver_ops function does not need to be
* implemented. Likewise, if the driver does not support WPA, this
* function is not needed.
*/
int (*flush_pmkid)(void *priv);
/**
* get_capa - Get driver capabilities
* @priv: private driver interface data
*
* Returns: 0 on success, -1 on failure
*
* Get driver/firmware/hardware capabilities.
*/
int (*get_capa)(void *priv, struct wpa_driver_capa *capa);
/**
* poll - Poll driver for association information
* @priv: private driver interface data
*
* This is an option callback that can be used when the driver does not
* provide event mechanism for association events. This is called when
* receiving WPA EAPOL-Key messages that require association
* information. The driver interface is supposed to generate associnfo
* event before returning from this callback function. In addition, the
* driver interface should generate an association event after having
* sent out associnfo.
*/
void (*poll)(void *priv);
/**
* get_ifname - Get interface name
* @priv: private driver interface data
*
* Returns: Pointer to the interface name. This can differ from the
* interface name used in init() call. Init() is called first.
*
* This optional function can be used to allow the driver interface to
* replace the interface name with something else, e.g., based on an
* interface mapping from a more descriptive name.
*/
const char * (*get_ifname)(void *priv);
/**
* get_mac_addr - Get own MAC address
* @priv: private driver interface data
*
* Returns: Pointer to own MAC address or %NULL on failure
*
* This optional function can be used to get the own MAC address of the
* device from the driver interface code. This is only needed if the
* l2_packet implementation for the OS does not provide easy access to
* a MAC address. */
const u8 * (*get_mac_addr)(void *priv);
/**
* send_eapol - Optional function for sending EAPOL packets
* @priv: private driver interface data
* @dest: Destination MAC address
* @proto: Ethertype
* @data: EAPOL packet starting with IEEE 802.1X header
* @data_len: Size of the EAPOL packet
*
* Returns: 0 on success, -1 on failure
*
* This optional function can be used to override l2_packet operations
* with driver specific functionality. If this function pointer is set,
* l2_packet module is not used at all and the driver interface code is
* responsible for receiving and sending all EAPOL packets. The
* received EAPOL packets are sent to core code with EVENT_EAPOL_RX
* event. The driver interface is required to implement get_mac_addr()
* handler if send_eapol() is used.
*/
int (*send_eapol)(void *priv, const u8 *dest, u16 proto,
const u8 *data, size_t data_len);
/**
* set_operstate - Sets device operating state to DORMANT or UP
* @priv: private driver interface data
* @state: 0 = dormant, 1 = up
* Returns: 0 on success, -1 on failure
*
* This is an optional function that can be used on operating systems
* that support a concept of controlling network device state from user
* space applications. This function, if set, gets called with
* state = 1 when authentication has been completed and with state = 0
* when connection is lost.
*/
int (*set_operstate)(void *priv, int state);
/**
* mlme_setprotection - MLME-SETPROTECTION.request primitive
* @priv: Private driver interface data
* @addr: Address of the station for which to set protection (may be
* %NULL for group keys)
* @protect_type: MLME_SETPROTECTION_PROTECT_TYPE_*
* @key_type: MLME_SETPROTECTION_KEY_TYPE_*
* Returns: 0 on success, -1 on failure
*
* This is an optional function that can be used to set the driver to
* require protection for Tx and/or Rx frames. This uses the layer
* interface defined in IEEE 802.11i-2004 clause 10.3.22.1
* (MLME-SETPROTECTION.request). Many drivers do not use explicit
* set protection operation; instead, they set protection implicitly
* based on configured keys.
*/
int (*mlme_setprotection)(void *priv, const u8 *addr, int protect_type,
int key_type);
/**
* get_hw_feature_data - Get hardware support data (channels and rates)
* @priv: Private driver interface data
* @num_modes: Variable for returning the number of returned modes
* flags: Variable for returning hardware feature flags
* Returns: Pointer to allocated hardware data on success or %NULL on
* failure. Caller is responsible for freeing this.
*/
struct hostapd_hw_modes * (*get_hw_feature_data)(void *priv,
u16 *num_modes,
u16 *flags);
/**
* send_mlme - Send management frame from MLME
* @priv: Private driver interface data
* @data: IEEE 802.11 management frame with IEEE 802.11 header
* @data_len: Size of the management frame
* @noack: Do not wait for this frame to be acked (disable retries)
* Returns: 0 on success, -1 on failure
*/
int (*send_mlme)(void *priv, const u8 *data, size_t data_len,
int noack);
/**
* update_ft_ies - Update FT (IEEE 802.11r) IEs
* @priv: Private driver interface data
* @md: Mobility domain (2 octets) (also included inside ies)
* @ies: FT IEs (MDIE, FTIE, ...) or %NULL to remove IEs
* @ies_len: Length of FT IEs in bytes
* Returns: 0 on success, -1 on failure
*
* The supplicant uses this callback to let the driver know that keying
* material for FT is available and that the driver can use the
* provided IEs in the next message in FT authentication sequence.
*
* This function is only needed for driver that support IEEE 802.11r
* (Fast BSS Transition).
*/
int (*update_ft_ies)(void *priv, const u8 *md, const u8 *ies,
size_t ies_len);
/**
* send_ft_action - Send FT Action frame (IEEE 802.11r)
* @priv: Private driver interface data
* @action: Action field value
* @target_ap: Target AP address
* @ies: FT IEs (MDIE, FTIE, ...) (FT Request action frame body)
* @ies_len: Length of FT IEs in bytes
* Returns: 0 on success, -1 on failure
*
* The supplicant uses this callback to request the driver to transmit
* an FT Action frame (action category 6) for over-the-DS fast BSS
* transition.
*/
int (*send_ft_action)(void *priv, u8 action, const u8 *target_ap,
const u8 *ies, size_t ies_len);
/**
* get_scan_results2 - Fetch the latest scan results
* @priv: private driver interface data
*
* Returns: Allocated buffer of scan results (caller is responsible for
* freeing the data structure) on success, NULL on failure
*/
struct wpa_scan_results * (*get_scan_results2)(void *priv);
/**
* set_country - Set country
* @priv: Private driver interface data
* @alpha2: country to which to switch to
* Returns: 0 on success, -1 on failure
*
* This function is for drivers which support some form
* of setting a regulatory domain.
*/
int (*set_country)(void *priv, const char *alpha2);
/**
* get_country - Get country
* @priv: Private driver interface data
* @alpha2: Buffer for returning country code (at least 3 octets)
* Returns: 0 on success, -1 on failure
*/
int (*get_country)(void *priv, char *alpha2);
/**
* global_init - Global driver initialization
* Returns: Pointer to private data (global), %NULL on failure
*
* This optional function is called to initialize the driver wrapper
* for global data, i.e., data that applies to all interfaces. If this
* function is implemented, global_deinit() will also need to be
* implemented to free the private data. The driver will also likely
* use init2() function instead of init() to get the pointer to global
* data available to per-interface initializer.
*/
void * (*global_init)(void);
/**
* global_deinit - Global driver deinitialization
* @priv: private driver global data from global_init()
*
* Terminate any global driver related functionality and free the
* global data structure.
*/
void (*global_deinit)(void *priv);
/**
* init2 - Initialize driver interface (with global data)
* @ctx: context to be used when calling wpa_supplicant functions,
* e.g., wpa_supplicant_event()
* @ifname: interface name, e.g., wlan0
* @global_priv: private driver global data from global_init()
* Returns: Pointer to private data, %NULL on failure
*
* This function can be used instead of init() if the driver wrapper
* uses global data.
*/
void * (*init2)(void *ctx, const char *ifname, void *global_priv);
/**
* get_interfaces - Get information about available interfaces
* @global_priv: private driver global data from global_init()
* Returns: Allocated buffer of interface information (caller is
* responsible for freeing the data structure) on success, NULL on
* failure
*/
struct wpa_interface_info * (*get_interfaces)(void *global_priv);
/**
* scan2 - Request the driver to initiate scan
* @priv: private driver interface data
* @params: Scan parameters
*
* Returns: 0 on success, -1 on failure
*
* Once the scan results are ready, the driver should report scan
* results event for wpa_supplicant which will eventually request the
* results with wpa_driver_get_scan_results2().
*/
int (*scan2)(void *priv, struct wpa_driver_scan_params *params);
/**
* authenticate - Request driver to authenticate
* @priv: private driver interface data
* @params: authentication parameters
* Returns: 0 on success, -1 on failure
*
* This is an optional function that can be used with drivers that
* support separate authentication and association steps, i.e., when
* wpa_supplicant can act as the SME. If not implemented, associate()
* function is expected to take care of IEEE 802.11 authentication,
* too.
*/
int (*authenticate)(void *priv,
struct wpa_driver_auth_params *params);
/**
* set_ap - Set Beacon and Probe Response information for AP mode
* @priv: Private driver interface data
* @params: Parameters to use in AP mode
*
* This function is used to configure Beacon template and/or extra IEs
* to add for Beacon and Probe Response frames for the driver in
* AP mode. The driver is responsible for building the full Beacon
* frame by concatenating the head part with TIM IE generated by the
* driver/firmware and finishing with the tail part. Depending on the
* driver architectue, this can be done either by using the full
* template or the set of additional IEs (e.g., WPS and P2P IE).
* Similarly, Probe Response processing depends on the driver design.
* If the driver (or firmware) takes care of replying to Probe Request
* frames, the extra IEs provided here needs to be added to the Probe
* Response frames.
*
* Returns: 0 on success, -1 on failure
*/
int (*set_ap)(void *priv, struct wpa_driver_ap_params *params);
/**
* set_acl - Set ACL in AP mode
* @priv: Private driver interface data
* @params: Parameters to configure ACL
* Returns: 0 on success, -1 on failure
*
* This is used only for the drivers which support MAC address ACL.
*/
int (*set_acl)(void *priv, struct hostapd_acl_params *params);
/**
* hapd_init - Initialize driver interface (hostapd only)
* @hapd: Pointer to hostapd context
* @params: Configuration for the driver wrapper
* Returns: Pointer to private data, %NULL on failure
*
* This function is used instead of init() or init2() when the driver
* wrapper is used with hostapd.
*/
void * (*hapd_init)(struct hostapd_data *hapd,
struct wpa_init_params *params);
/**
* hapd_deinit - Deinitialize driver interface (hostapd only)
* @priv: Private driver interface data from hapd_init()
*/
void (*hapd_deinit)(void *priv);
/**
* set_ieee8021x - Enable/disable IEEE 802.1X support (AP only)
* @priv: Private driver interface data
* @params: BSS parameters
* Returns: 0 on success, -1 on failure
*
* This is an optional function to configure the kernel driver to
* enable/disable IEEE 802.1X support and set WPA/WPA2 parameters. This
* can be left undefined (set to %NULL) if IEEE 802.1X support is
* always enabled and the driver uses set_ap() to set WPA/RSN IE
* for Beacon frames.
*
* DEPRECATED - use set_ap() instead
*/
int (*set_ieee8021x)(void *priv, struct wpa_bss_params *params);
/**
* set_privacy - Enable/disable privacy (AP only)
* @priv: Private driver interface data
* @enabled: 1 = privacy enabled, 0 = disabled
* Returns: 0 on success, -1 on failure
*
* This is an optional function to configure privacy field in the
* kernel driver for Beacon frames. This can be left undefined (set to
* %NULL) if the driver uses the Beacon template from set_ap().
*
* DEPRECATED - use set_ap() instead
*/
int (*set_privacy)(void *priv, int enabled);
/**
* get_seqnum - Fetch the current TSC/packet number (AP only)
* @ifname: The interface name (main or virtual)
* @priv: Private driver interface data
* @addr: MAC address of the station or %NULL for group keys
* @idx: Key index
* @seq: Buffer for returning the latest used TSC/packet number
* Returns: 0 on success, -1 on failure
*
* This function is used to fetch the last used TSC/packet number for
* a TKIP, CCMP, GCMP, or BIP/IGTK key. It is mainly used with group
* keys, so there is no strict requirement on implementing support for
* unicast keys (i.e., addr != %NULL).
*/
int (*get_seqnum)(const char *ifname, void *priv, const u8 *addr,
int idx, u8 *seq);
/**
* flush - Flush all association stations (AP only)
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure
*
* This function requests the driver to disassociate all associated
* stations. This function does not need to be implemented if the
* driver does not process association frames internally.
*/
int (*flush)(void *priv);
/**
* set_generic_elem - Add IEs into Beacon/Probe Response frames (AP)
* @priv: Private driver interface data
* @elem: Information elements
* @elem_len: Length of the elem buffer in octets
* Returns: 0 on success, -1 on failure
*
* This is an optional function to add information elements in the
* kernel driver for Beacon and Probe Response frames. This can be left
* undefined (set to %NULL) if the driver uses the Beacon template from
* set_ap().
*
* DEPRECATED - use set_ap() instead
*/
int (*set_generic_elem)(void *priv, const u8 *elem, size_t elem_len);
/**
* read_sta_data - Fetch station data
* @priv: Private driver interface data
* @data: Buffer for returning station information
* @addr: MAC address of the station
* Returns: 0 on success, -1 on failure
*/
int (*read_sta_data)(void *priv, struct hostap_sta_driver_data *data,
const u8 *addr);
/**
* hapd_send_eapol - Send an EAPOL packet (AP only)
* @priv: private driver interface data
* @addr: Destination MAC address
* @data: EAPOL packet starting with IEEE 802.1X header
* @data_len: Length of the EAPOL packet in octets
* @encrypt: Whether the frame should be encrypted
* @own_addr: Source MAC address
* @flags: WPA_STA_* flags for the destination station
*
* Returns: 0 on success, -1 on failure
*/
int (*hapd_send_eapol)(void *priv, const u8 *addr, const u8 *data,
size_t data_len, int encrypt,
const u8 *own_addr, u32 flags);
/**
* sta_deauth - Deauthenticate a station (AP only)
* @priv: Private driver interface data
* @own_addr: Source address and BSSID for the Deauthentication frame
* @addr: MAC address of the station to deauthenticate
* @reason: Reason code for the Deauthentiation frame
* Returns: 0 on success, -1 on failure
*
* This function requests a specific station to be deauthenticated and
* a Deauthentication frame to be sent to it.
*/
int (*sta_deauth)(void *priv, const u8 *own_addr, const u8 *addr,
int reason);
/**
* sta_disassoc - Disassociate a station (AP only)
* @priv: Private driver interface data
* @own_addr: Source address and BSSID for the Disassociation frame
* @addr: MAC address of the station to disassociate
* @reason: Reason code for the Disassociation frame
* Returns: 0 on success, -1 on failure
*
* This function requests a specific station to be disassociated and
* a Disassociation frame to be sent to it.
*/
int (*sta_disassoc)(void *priv, const u8 *own_addr, const u8 *addr,
int reason);
/**
* sta_remove - Remove a station entry (AP only)
* @priv: Private driver interface data
* @addr: MAC address of the station to be removed
* Returns: 0 on success, -1 on failure
*/
int (*sta_remove)(void *priv, const u8 *addr);
/**
* hapd_get_ssid - Get the current SSID (AP only)
* @priv: Private driver interface data
* @buf: Buffer for returning the SSID
* @len: Maximum length of the buffer
* Returns: Length of the SSID on success, -1 on failure
*
* This function need not be implemented if the driver uses Beacon
* template from set_ap() and does not reply to Probe Request frames.
*/
int (*hapd_get_ssid)(void *priv, u8 *buf, int len);
/**
* hapd_set_ssid - Set SSID (AP only)
* @priv: Private driver interface data
* @buf: SSID
* @len: Length of the SSID in octets
* Returns: 0 on success, -1 on failure
*
* DEPRECATED - use set_ap() instead
*/
int (*hapd_set_ssid)(void *priv, const u8 *buf, int len);
/**
* hapd_set_countermeasures - Enable/disable TKIP countermeasures (AP)
* @priv: Private driver interface data
* @enabled: 1 = countermeasures enabled, 0 = disabled
* Returns: 0 on success, -1 on failure
*
* This need not be implemented if the driver does not take care of
* association processing.
*/
int (*hapd_set_countermeasures)(void *priv, int enabled);
/**
* sta_add - Add a station entry
* @priv: Private driver interface data
* @params: Station parameters
* Returns: 0 on success, -1 on failure
*
* This function is used to add a station entry to the driver once the
* station has completed association. This is only used if the driver
* does not take care of association processing.
*
* With TDLS, this function is also used to add or set (params->set 1)
* TDLS peer entries.
*/
int (*sta_add)(void *priv, struct hostapd_sta_add_params *params);
/**
* get_inact_sec - Get station inactivity duration (AP only)
* @priv: Private driver interface data
* @addr: Station address
* Returns: Number of seconds station has been inactive, -1 on failure
*/
int (*get_inact_sec)(void *priv, const u8 *addr);
/**
* sta_clear_stats - Clear station statistics (AP only)
* @priv: Private driver interface data
* @addr: Station address
* Returns: 0 on success, -1 on failure
*/
int (*sta_clear_stats)(void *priv, const u8 *addr);
/**
* set_freq - Set channel/frequency (AP only)
* @priv: Private driver interface data
* @freq: Channel parameters
* Returns: 0 on success, -1 on failure
*/
int (*set_freq)(void *priv, struct hostapd_freq_params *freq);
/**
* set_rts - Set RTS threshold
* @priv: Private driver interface data
* @rts: RTS threshold in octets
* Returns: 0 on success, -1 on failure
*/
int (*set_rts)(void *priv, int rts);
/**
* set_frag - Set fragmentation threshold
* @priv: Private driver interface data
* @frag: Fragmentation threshold in octets
* Returns: 0 on success, -1 on failure
*/
int (*set_frag)(void *priv, int frag);
/**
* sta_set_flags - Set station flags (AP only)
* @priv: Private driver interface data
* @addr: Station address
* @total_flags: Bitmap of all WPA_STA_* flags currently set
* @flags_or: Bitmap of WPA_STA_* flags to add
* @flags_and: Bitmap of WPA_STA_* flags to us as a mask
* Returns: 0 on success, -1 on failure
*/
int (*sta_set_flags)(void *priv, const u8 *addr,
int total_flags, int flags_or, int flags_and);
/**
* set_tx_queue_params - Set TX queue parameters
* @priv: Private driver interface data
* @queue: Queue number (0 = VO, 1 = VI, 2 = BE, 3 = BK)
* @aifs: AIFS
* @cw_min: cwMin
* @cw_max: cwMax
* @burst_time: Maximum length for bursting in 0.1 msec units
*/
int (*set_tx_queue_params)(void *priv, int queue, int aifs, int cw_min,
int cw_max, int burst_time);
/**
* if_add - Add a virtual interface
* @priv: Private driver interface data
* @type: Interface type
* @ifname: Interface name for the new virtual interface
* @addr: Local address to use for the interface or %NULL to use the
* parent interface address
* @bss_ctx: BSS context for %WPA_IF_AP_BSS interfaces
* @drv_priv: Pointer for overwriting the driver context or %NULL if
* not allowed (applies only to %WPA_IF_AP_BSS type)
* @force_ifname: Buffer for returning an interface name that the
* driver ended up using if it differs from the requested ifname
* @if_addr: Buffer for returning the allocated interface address
* (this may differ from the requested addr if the driver cannot
* change interface address)
* @bridge: Bridge interface to use or %NULL if no bridge configured
* @use_existing: Whether to allow existing interface to be used
* Returns: 0 on success, -1 on failure
*/
int (*if_add)(void *priv, enum wpa_driver_if_type type,
const char *ifname, const u8 *addr, void *bss_ctx,
void **drv_priv, char *force_ifname, u8 *if_addr,
const char *bridge, int use_existing);
/**
* if_remove - Remove a virtual interface
* @priv: Private driver interface data
* @type: Interface type
* @ifname: Interface name of the virtual interface to be removed
* Returns: 0 on success, -1 on failure
*/
int (*if_remove)(void *priv, enum wpa_driver_if_type type,
const char *ifname);
/**
* set_sta_vlan - Bind a station into a specific interface (AP only)
* @priv: Private driver interface data
* @ifname: Interface (main or virtual BSS or VLAN)
* @addr: MAC address of the associated station
* @vlan_id: VLAN ID
* Returns: 0 on success, -1 on failure
*
* This function is used to bind a station to a specific virtual
* interface. It is only used if when virtual interfaces are supported,
* e.g., to assign stations to different VLAN interfaces based on
* information from a RADIUS server. This allows separate broadcast
* domains to be used with a single BSS.
*/
int (*set_sta_vlan)(void *priv, const u8 *addr, const char *ifname,
int vlan_id);
/**
* commit - Optional commit changes handler (AP only)
* @priv: driver private data
* Returns: 0 on success, -1 on failure
*
* This optional handler function can be registered if the driver
* interface implementation needs to commit changes (e.g., by setting
* network interface up) at the end of initial configuration. If set,
* this handler will be called after initial setup has been completed.
*/
int (*commit)(void *priv);
/**
* send_ether - Send an ethernet packet (AP only)
* @priv: private driver interface data
* @dst: Destination MAC address
* @src: Source MAC address
* @proto: Ethertype
* @data: EAPOL packet starting with IEEE 802.1X header
* @data_len: Length of the EAPOL packet in octets
* Returns: 0 on success, -1 on failure
*/
int (*send_ether)(void *priv, const u8 *dst, const u8 *src, u16 proto,
const u8 *data, size_t data_len);
/**
* set_radius_acl_auth - Notification of RADIUS ACL change
* @priv: Private driver interface data
* @mac: MAC address of the station
* @accepted: Whether the station was accepted
* @session_timeout: Session timeout for the station
* Returns: 0 on success, -1 on failure
*/
int (*set_radius_acl_auth)(void *priv, const u8 *mac, int accepted,
u32 session_timeout);
/**
* set_radius_acl_expire - Notification of RADIUS ACL expiration
* @priv: Private driver interface data
* @mac: MAC address of the station
* Returns: 0 on success, -1 on failure
*/
int (*set_radius_acl_expire)(void *priv, const u8 *mac);
/**
* set_ap_wps_ie - Add WPS IE(s) into Beacon/Probe Response frames (AP)
* @priv: Private driver interface data
* @beacon: WPS IE(s) for Beacon frames or %NULL to remove extra IE(s)
* @proberesp: WPS IE(s) for Probe Response frames or %NULL to remove
* extra IE(s)
* @assocresp: WPS IE(s) for (Re)Association Response frames or %NULL
* to remove extra IE(s)
* Returns: 0 on success, -1 on failure
*
* This is an optional function to add WPS IE in the kernel driver for
* Beacon and Probe Response frames. This can be left undefined (set
* to %NULL) if the driver uses the Beacon template from set_ap()
* and does not process Probe Request frames. If the driver takes care
* of (Re)Association frame processing, the assocresp buffer includes
* WPS IE(s) that need to be added to (Re)Association Response frames
* whenever a (Re)Association Request frame indicated use of WPS.
*
* This will also be used to add P2P IE(s) into Beacon/Probe Response
* frames when operating as a GO. The driver is responsible for adding
* timing related attributes (e.g., NoA) in addition to the IEs
* included here by appending them after these buffers. This call is
* also used to provide Probe Response IEs for P2P Listen state
* operations for drivers that generate the Probe Response frames
* internally.
*
* DEPRECATED - use set_ap() instead
*/
int (*set_ap_wps_ie)(void *priv, const struct wpabuf *beacon,
const struct wpabuf *proberesp,
const struct wpabuf *assocresp);
/**
* set_supp_port - Set IEEE 802.1X Supplicant Port status
* @priv: Private driver interface data
* @authorized: Whether the port is authorized
* Returns: 0 on success, -1 on failure
*/
int (*set_supp_port)(void *priv, int authorized);
/**
* set_wds_sta - Bind a station into a 4-address WDS (AP only)
* @priv: Private driver interface data
* @addr: MAC address of the associated station
* @aid: Association ID
* @val: 1 = bind to 4-address WDS; 0 = unbind
* @bridge_ifname: Bridge interface to use for the WDS station or %NULL
* to indicate that bridge is not to be used
* @ifname_wds: Buffer to return the interface name for the new WDS
* station or %NULL to indicate name is not returned.
* Returns: 0 on success, -1 on failure
*/
int (*set_wds_sta)(void *priv, const u8 *addr, int aid, int val,
const char *bridge_ifname, char *ifname_wds);
/**
* send_action - Transmit an Action frame
* @priv: Private driver interface data
* @freq: Frequency (in MHz) of the channel
* @wait: Time to wait off-channel for a response (in ms), or zero
* @dst: Destination MAC address (Address 1)
* @src: Source MAC address (Address 2)
* @bssid: BSSID (Address 3)
* @data: Frame body
* @data_len: data length in octets
@ @no_cck: Whether CCK rates must not be used to transmit this frame
* Returns: 0 on success, -1 on failure
*
* This command can be used to request the driver to transmit an action
* frame to the specified destination.
*
* If the %WPA_DRIVER_FLAGS_OFFCHANNEL_TX flag is set, the frame will
* be transmitted on the given channel and the device will wait for a
* response on that channel for the given wait time.
*
* If the flag is not set, the wait time will be ignored. In this case,
* if a remain-on-channel duration is in progress, the frame must be
* transmitted on that channel; alternatively the frame may be sent on
* the current operational channel (if in associated state in station
* mode or while operating as an AP.)
*/
int (*send_action)(void *priv, unsigned int freq, unsigned int wait,
const u8 *dst, const u8 *src, const u8 *bssid,
const u8 *data, size_t data_len, int no_cck);
/**
* send_action_cancel_wait - Cancel action frame TX wait
* @priv: Private driver interface data
*
* This command cancels the wait time associated with sending an action
* frame. It is only available when %WPA_DRIVER_FLAGS_OFFCHANNEL_TX is
* set in the driver flags.
*/
void (*send_action_cancel_wait)(void *priv);
/**
* remain_on_channel - Remain awake on a channel
* @priv: Private driver interface data
* @freq: Frequency (in MHz) of the channel
* @duration: Duration in milliseconds
* Returns: 0 on success, -1 on failure
*
* This command is used to request the driver to remain awake on the
* specified channel for the specified duration and report received
* Action frames with EVENT_RX_MGMT events. Optionally, received
* Probe Request frames may also be requested to be reported by calling
* probe_req_report(). These will be reported with EVENT_RX_PROBE_REQ.
*
* The driver may not be at the requested channel when this function
* returns, i.e., the return code is only indicating whether the
* request was accepted. The caller will need to wait until the
* EVENT_REMAIN_ON_CHANNEL event indicates that the driver has
* completed the channel change. This may take some time due to other
* need for the radio and the caller should be prepared to timing out
* its wait since there are no guarantees on when this request can be
* executed.
*/
int (*remain_on_channel)(void *priv, unsigned int freq,
unsigned int duration);
/**
* cancel_remain_on_channel - Cancel remain-on-channel operation
* @priv: Private driver interface data
*
* This command can be used to cancel a remain-on-channel operation
* before its originally requested duration has passed. This could be
* used, e.g., when remain_on_channel() is used to request extra time
* to receive a response to an Action frame and the response is
* received when there is still unneeded time remaining on the
* remain-on-channel operation.
*/
int (*cancel_remain_on_channel)(void *priv);
/**
* probe_req_report - Request Probe Request frames to be indicated
* @priv: Private driver interface data
* @report: Whether to report received Probe Request frames
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This command can be used to request the driver to indicate when
* Probe Request frames are received with EVENT_RX_PROBE_REQ events.
* Since this operation may require extra resources, e.g., due to less
* optimal hardware/firmware RX filtering, many drivers may disable
* Probe Request reporting at least in station mode. This command is
* used to notify the driver when the Probe Request frames need to be
* reported, e.g., during remain-on-channel operations.
*/
int (*probe_req_report)(void *priv, int report);
/**
* deinit_ap - Deinitialize AP mode
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This optional function can be used to disable AP mode related
* configuration. If the interface was not dynamically added,
* change the driver mode to station mode to allow normal station
* operations like scanning to be completed.
*/
int (*deinit_ap)(void *priv);
/**
* deinit_p2p_cli - Deinitialize P2P client mode
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This optional function can be used to disable P2P client mode. If the
* interface was not dynamically added, change the interface type back
* to station mode.
*/
int (*deinit_p2p_cli)(void *priv);
/**
* suspend - Notification on system suspend/hibernate event
* @priv: Private driver interface data
*/
void (*suspend)(void *priv);
/**
* resume - Notification on system resume/thaw event
* @priv: Private driver interface data
*/
void (*resume)(void *priv);
/**
* signal_monitor - Set signal monitoring parameters
* @priv: Private driver interface data
* @threshold: Threshold value for signal change events; 0 = disabled
* @hysteresis: Minimum change in signal strength before indicating a
* new event
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This function can be used to configure monitoring of signal strength
* with the current AP. Whenever signal strength drops below the
* %threshold value or increases above it, EVENT_SIGNAL_CHANGE event
* should be generated assuming the signal strength has changed at
* least %hysteresis from the previously indicated signal change event.
*/
int (*signal_monitor)(void *priv, int threshold, int hysteresis);
/**
* send_frame - Send IEEE 802.11 frame (testing use only)
* @priv: Private driver interface data
* @data: IEEE 802.11 frame with IEEE 802.11 header
* @data_len: Size of the frame
* @encrypt: Whether to encrypt the frame (if keys are set)
* Returns: 0 on success, -1 on failure
*
* This function is only used for debugging purposes and is not
* required to be implemented for normal operations.
*/
int (*send_frame)(void *priv, const u8 *data, size_t data_len,
int encrypt);
/**
* shared_freq - Get operating frequency of shared interface(s)
* @priv: Private driver interface data
* Returns: Operating frequency in MHz, 0 if no shared operation in
* use, or -1 on failure
*
* This command can be used to request the current operating frequency
* of any virtual interface that shares the same radio to provide
* information for channel selection for other virtual interfaces.
*/
int (*shared_freq)(void *priv);
/**
* get_noa - Get current Notice of Absence attribute payload
* @priv: Private driver interface data
* @buf: Buffer for returning NoA
* @buf_len: Buffer length in octets
* Returns: Number of octets used in buf, 0 to indicate no NoA is being
* advertized, or -1 on failure
*
* This function is used to fetch the current Notice of Absence
* attribute value from GO.
*/
int (*get_noa)(void *priv, u8 *buf, size_t buf_len);
/**
* set_noa - Set Notice of Absence parameters for GO (testing)
* @priv: Private driver interface data
* @count: Count
* @start: Start time in ms from next TBTT
* @duration: Duration in ms
* Returns: 0 on success or -1 on failure
*
* This function is used to set Notice of Absence parameters for GO. It
* is used only for testing. To disable NoA, all parameters are set to
* 0.
*/
int (*set_noa)(void *priv, u8 count, int start, int duration);
/**
* set_p2p_powersave - Set P2P power save options
* @priv: Private driver interface data
* @legacy_ps: 0 = disable, 1 = enable, 2 = maximum PS, -1 = no change
* @opp_ps: 0 = disable, 1 = enable, -1 = no change
* @ctwindow: 0.. = change (msec), -1 = no change
* Returns: 0 on success or -1 on failure
*/
int (*set_p2p_powersave)(void *priv, int legacy_ps, int opp_ps,
int ctwindow);
/**
* ampdu - Enable/disable aggregation
* @priv: Private driver interface data
* @ampdu: 1/0 = enable/disable A-MPDU aggregation
* Returns: 0 on success or -1 on failure
*/
int (*ampdu)(void *priv, int ampdu);
/**
* get_radio_name - Get physical radio name for the device
* @priv: Private driver interface data
* Returns: Radio name or %NULL if not known
*
* The returned data must not be modified by the caller. It is assumed
* that any interface that has the same radio name as another is
* sharing the same physical radio. This information can be used to
* share scan results etc. information between the virtual interfaces
* to speed up various operations.
*/
const char * (*get_radio_name)(void *priv);
/**
* send_tdls_mgmt - for sending TDLS management packets
* @priv: private driver interface data
* @dst: Destination (peer) MAC address
* @action_code: TDLS action code for the mssage
* @dialog_token: Dialog Token to use in the message (if needed)
* @status_code: Status Code or Reason Code to use (if needed)
* @peer_capab: TDLS peer capability (TDLS_PEER_* bitfield)
* @buf: TDLS IEs to add to the message
* @len: Length of buf in octets
* Returns: 0 on success, negative (<0) on failure
*
* This optional function can be used to send packet to driver which is
* responsible for receiving and sending all TDLS packets.
*/
int (*send_tdls_mgmt)(void *priv, const u8 *dst, u8 action_code,
u8 dialog_token, u16 status_code, u32 peer_capab,
const u8 *buf, size_t len);
/**
* tdls_oper - Ask the driver to perform high-level TDLS operations
* @priv: Private driver interface data
* @oper: TDLS high-level operation. See %enum tdls_oper
* @peer: Destination (peer) MAC address
* Returns: 0 on success, negative (<0) on failure
*
* This optional function can be used to send high-level TDLS commands
* to the driver.
*/
int (*tdls_oper)(void *priv, enum tdls_oper oper, const u8 *peer);
/**
* wnm_oper - Notify driver of the WNM frame reception
* @priv: Private driver interface data
* @oper: WNM operation. See %enum wnm_oper
* @peer: Destination (peer) MAC address
* @buf: Buffer for the driver to fill in (for getting IE)
* @buf_len: Return the len of buf
* Returns: 0 on success, negative (<0) on failure
*/
int (*wnm_oper)(void *priv, enum wnm_oper oper, const u8 *peer,
u8 *buf, u16 *buf_len);
/**
* set_qos_map - Set QoS Map
* @priv: Private driver interface data
* @qos_map_set: QoS Map
* @qos_map_set_len: Length of QoS Map
*/
int (*set_qos_map)(void *priv, const u8 *qos_map_set,
u8 qos_map_set_len);
/**
* set_wowlan - Set wake-on-wireless triggers
* @priv: Private driver interface data
* @triggers: wowlan triggers
*/
int (*set_wowlan)(void *priv, const struct wowlan_triggers *triggers);
/**
* signal_poll - Get current connection information
* @priv: Private driver interface data
* @signal_info: Connection info structure
*/
int (*signal_poll)(void *priv, struct wpa_signal_info *signal_info);
/**
* set_authmode - Set authentication algorithm(s) for static WEP
* @priv: Private driver interface data
* @authmode: 1=Open System, 2=Shared Key, 3=both
* Returns: 0 on success, -1 on failure
*
* This function can be used to set authentication algorithms for AP
* mode when static WEP is used. If the driver uses user space MLME/SME
* implementation, there is no need to implement this function.
*
* DEPRECATED - use set_ap() instead
*/
int (*set_authmode)(void *priv, int authmode);
#ifdef ANDROID
/**
* driver_cmd - Execute driver-specific command
* @priv: Private driver interface data
* @cmd: Command to execute
* @buf: Return buffer
* @buf_len: Buffer length
* Returns: 0 on success, -1 on failure
*/
int (*driver_cmd)(void *priv, char *cmd, char *buf, size_t buf_len);
#endif /* ANDROID */
/**
* vendor_cmd - Execute vendor specific command
* @priv: Private driver interface data
* @vendor_id: Vendor id
* @subcmd: Vendor command id
* @data: Vendor command parameters (%NULL if no parameters)
* @data_len: Data length
* @buf: Return buffer (%NULL to ignore reply)
* Returns: 0 on success, negative (<0) on failure
*
* This function handles vendor specific commands that are passed to
* the driver/device. The command is identified by vendor id and
* command id. Parameters can be passed as argument to the command
* in the data buffer. Reply (if any) will be filled in the supplied
* return buffer.
*
* The exact driver behavior is driver interface and vendor specific. As
* an example, this will be converted to a vendor specific cfg80211
* command in case of the nl80211 driver interface.
*/
int (*vendor_cmd)(void *priv, unsigned int vendor_id,
unsigned int subcmd, const u8 *data, size_t data_len,
struct wpabuf *buf);
/**
* set_rekey_info - Set rekey information
* @priv: Private driver interface data
* @kek: Current KEK
* @kck: Current KCK
* @replay_ctr: Current EAPOL-Key Replay Counter
*
* This optional function can be used to provide information for the
* driver/firmware to process EAPOL-Key frames in Group Key Handshake
* while the host (including wpa_supplicant) is sleeping.
*/
void (*set_rekey_info)(void *priv, const u8 *kek, const u8 *kck,
const u8 *replay_ctr);
/**
* sta_assoc - Station association indication
* @priv: Private driver interface data
* @own_addr: Source address and BSSID for association frame
* @addr: MAC address of the station to associate
* @reassoc: flag to indicate re-association
* @status: association response status code
* @ie: assoc response ie buffer
* @len: ie buffer length
* Returns: 0 on success, -1 on failure
*
* This function indicates the driver to send (Re)Association
* Response frame to the station.
*/
int (*sta_assoc)(void *priv, const u8 *own_addr, const u8 *addr,
int reassoc, u16 status, const u8 *ie, size_t len);
/**
* sta_auth - Station authentication indication
* @priv: Private driver interface data
* @own_addr: Source address and BSSID for authentication frame
* @addr: MAC address of the station to associate
* @seq: authentication sequence number
* @status: authentication response status code
* @ie: authentication frame ie buffer
* @len: ie buffer length
*
* This function indicates the driver to send Authentication frame
* to the station.
*/
int (*sta_auth)(void *priv, const u8 *own_addr, const u8 *addr,
u16 seq, u16 status, const u8 *ie, size_t len);
/**
* add_tspec - Add traffic stream
* @priv: Private driver interface data
* @addr: MAC address of the station to associate
* @tspec_ie: tspec ie buffer
* @tspec_ielen: tspec ie length
* Returns: 0 on success, -1 on failure
*
* This function adds the traffic steam for the station
* and fills the medium_time in tspec_ie.
*/
int (*add_tspec)(void *priv, const u8 *addr, u8 *tspec_ie,
size_t tspec_ielen);
/**
* add_sta_node - Add a station node in the driver
* @priv: Private driver interface data
* @addr: MAC address of the station to add
* @auth_alg: authentication algorithm used by the station
* Returns: 0 on success, -1 on failure
*
* This function adds the station node in the driver, when
* the station gets added by FT-over-DS.
*/
int (*add_sta_node)(void *priv, const u8 *addr, u16 auth_alg);
/**
* sched_scan - Request the driver to initiate scheduled scan
* @priv: Private driver interface data
* @params: Scan parameters
* @interval: Interval between scan cycles in milliseconds
* Returns: 0 on success, -1 on failure
*
* This operation should be used for scheduled scan offload to
* the hardware. Every time scan results are available, the
* driver should report scan results event for wpa_supplicant
* which will eventually request the results with
* wpa_driver_get_scan_results2(). This operation is optional
* and if not provided or if it returns -1, we fall back to
* normal host-scheduled scans.
*/
int (*sched_scan)(void *priv, struct wpa_driver_scan_params *params,
u32 interval);
/**
* stop_sched_scan - Request the driver to stop a scheduled scan
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure
*
* This should cause the scheduled scan to be stopped and
* results should stop being sent. Must be supported if
* sched_scan is supported.
*/
int (*stop_sched_scan)(void *priv);
/**
* poll_client - Probe (null data or such) the given station
* @priv: Private driver interface data
* @own_addr: MAC address of sending interface
* @addr: MAC address of the station to probe
* @qos: Indicates whether station is QoS station
*
* This function is used to verify whether an associated station is
* still present. This function does not need to be implemented if the
* driver provides such inactivity polling mechanism.
*/
void (*poll_client)(void *priv, const u8 *own_addr,
const u8 *addr, int qos);
/**
* radio_disable - Disable/enable radio
* @priv: Private driver interface data
* @disabled: 1=disable 0=enable radio
* Returns: 0 on success, -1 on failure
*
* This optional command is for testing purposes. It can be used to
* disable the radio on a testbed device to simulate out-of-radio-range
* conditions.
*/
int (*radio_disable)(void *priv, int disabled);
/**
* switch_channel - Announce channel switch and migrate the GO to the
* given frequency
* @priv: Private driver interface data
* @settings: Settings for CSA period and new channel
* Returns: 0 on success, -1 on failure
*
* This function is used to move the GO to the legacy STA channel to
* avoid frequency conflict in single channel concurrency.
*/
int (*switch_channel)(void *priv, struct csa_settings *settings);
/**
* start_dfs_cac - Listen for radar interference on the channel
* @priv: Private driver interface data
* @freq: Channel parameters
* Returns: 0 on success, -1 on failure
*/
int (*start_dfs_cac)(void *priv, struct hostapd_freq_params *freq);
/**
* stop_ap - Removes beacon from AP
* @priv: Private driver interface data
* Returns: 0 on success, -1 on failure (or if not supported)
*
* This optional function can be used to disable AP mode related
* configuration. Unlike deinit_ap, it does not change to station
* mode.
*/
int (*stop_ap)(void *priv);
/**
* get_survey - Retrieve survey data
* @priv: Private driver interface data
* @freq: If set, survey data for the specified frequency is only
* being requested. If not set, all survey data is requested.
* Returns: 0 on success, -1 on failure
*
* Use this to retrieve:
*
* - the observed channel noise floor
* - the amount of time we have spent on the channel
* - the amount of time during which we have spent on the channel that
* the radio has determined the medium is busy and we cannot
* transmit
* - the amount of time we have spent receiving data
* - the amount of time we have spent transmitting data
*
* This data can be used for spectrum heuristics. One example is
* Automatic Channel Selection (ACS). The channel survey data is
* kept on a linked list on the channel data, one entry is added
* for each survey. The min_nf of the channel is updated for each
* survey.
*/
int (*get_survey)(void *priv, unsigned int freq);
/**
* status - Get driver interface status information
* @priv: Private driver interface data
* @buf: Buffer for printing tou the status information
* @buflen: Maximum length of the buffer
* Returns: Length of written status information or -1 on failure
*/
int (*status)(void *priv, char *buf, size_t buflen);
#ifdef CONFIG_MACSEC
int (*macsec_init)(void *priv, struct macsec_init_params *params);
int (*macsec_deinit)(void *priv);
/**
* enable_protect_frames - Set protect frames status
* @priv: Private driver interface data
* @enabled: TRUE = protect frames enabled
* FALSE = protect frames disabled
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*enable_protect_frames)(void *priv, Boolean enabled);
/**
* set_replay_protect - Set replay protect status and window size
* @priv: Private driver interface data
* @enabled: TRUE = replay protect enabled
* FALSE = replay protect disabled
* @window: replay window size, valid only when replay protect enabled
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*set_replay_protect)(void *priv, Boolean enabled, u32 window);
/**
* set_current_cipher_suite - Set current cipher suite
* @priv: Private driver interface data
* @cs: EUI64 identifier
* @cs_len: Length of the cs buffer in octets
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*set_current_cipher_suite)(void *priv, const u8 *cs,
size_t cs_len);
/**
* enable_controlled_port - Set controlled port status
* @priv: Private driver interface data
* @enabled: TRUE = controlled port enabled
* FALSE = controlled port disabled
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*enable_controlled_port)(void *priv, Boolean enabled);
/**
* get_receive_lowest_pn - Get receive lowest pn
* @priv: Private driver interface data
* @channel: secure channel
* @an: association number
* @lowest_pn: lowest accept pn
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*get_receive_lowest_pn)(void *priv, u32 channel, u8 an,
u32 *lowest_pn);
/**
* get_transmit_next_pn - Get transmit next pn
* @priv: Private driver interface data
* @channel: secure channel
* @an: association number
* @next_pn: next pn
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*get_transmit_next_pn)(void *priv, u32 channel, u8 an,
u32 *next_pn);
/**
* set_transmit_next_pn - Set transmit next pn
* @priv: Private driver interface data
* @channel: secure channel
* @an: association number
* @next_pn: next pn
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*set_transmit_next_pn)(void *priv, u32 channel, u8 an,
u32 next_pn);
/**
* get_available_receive_sc - get available receive channel
* @priv: Private driver interface data
* @channel: secure channel
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*get_available_receive_sc)(void *priv, u32 *channel);
/**
* create_receive_sc - create secure channel for receiving
* @priv: Private driver interface data
* @channel: secure channel
* @sci_addr: secure channel identifier - address
* @sci_port: secure channel identifier - port
* @conf_offset: confidentiality offset (0, 30, or 50)
* @validation: frame validation policy (0 = Disabled, 1 = Checked,
* 2 = Strict)
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*create_receive_sc)(void *priv, u32 channel, const u8 *sci_addr,
u16 sci_port, unsigned int conf_offset,
int validation);
/**
* delete_receive_sc - delete secure connection for receiving
* @priv: private driver interface data from init()
* @channel: secure channel
* Returns: 0 on success, -1 on failure
*/
int (*delete_receive_sc)(void *priv, u32 channel);
/**
* create_receive_sa - create secure association for receive
* @priv: private driver interface data from init()
* @channel: secure channel
* @an: association number
* @lowest_pn: the lowest packet number can be received
* @sak: the secure association key
* Returns: 0 on success, -1 on failure
*/
int (*create_receive_sa)(void *priv, u32 channel, u8 an,
u32 lowest_pn, const u8 *sak);
/**
* enable_receive_sa - enable the SA for receive
* @priv: private driver interface data from init()
* @channel: secure channel
* @an: association number
* Returns: 0 on success, -1 on failure
*/
int (*enable_receive_sa)(void *priv, u32 channel, u8 an);
/**
* disable_receive_sa - disable SA for receive
* @priv: private driver interface data from init()
* @channel: secure channel index
* @an: association number
* Returns: 0 on success, -1 on failure
*/
int (*disable_receive_sa)(void *priv, u32 channel, u8 an);
/**
* get_available_transmit_sc - get available transmit channel
* @priv: Private driver interface data
* @channel: secure channel
* Returns: 0 on success, -1 on failure (or if not supported)
*/
int (*get_available_transmit_sc)(void *priv, u32 *channel);
/**
* create_transmit_sc - create secure connection for transmit
* @priv: private driver interface data from init()
* @channel: secure channel
* @sci_addr: secure channel identifier - address
* @sci_port: secure channel identifier - port
* Returns: 0 on success, -1 on failure
*/
int (*create_transmit_sc)(void *priv, u32 channel, const u8 *sci_addr,
u16 sci_port, unsigned int conf_offset);
/**
* delete_transmit_sc - delete secure connection for transmit
* @priv: private driver interface data from init()
* @channel: secure channel
* Returns: 0 on success, -1 on failure
*/
int (*delete_transmit_sc)(void *priv, u32 channel);
/**
* create_transmit_sa - create secure association for transmit
* @priv: private driver interface data from init()
* @channel: secure channel index
* @an: association number
* @next_pn: the packet number used as next transmit packet
* @confidentiality: True if the SA is to provide confidentiality
* as well as integrity
* @sak: the secure association key
* Returns: 0 on success, -1 on failure
*/
int (*create_transmit_sa)(void *priv, u32 channel, u8 an, u32 next_pn,
Boolean confidentiality, const u8 *sak);
/**
* enable_transmit_sa - enable SA for transmit
* @priv: private driver interface data from init()
* @channel: secure channel
* @an: association number
* Returns: 0 on success, -1 on failure
*/
int (*enable_transmit_sa)(void *priv, u32 channel, u8 an);
/**
* disable_transmit_sa - disable SA for transmit
* @priv: private driver interface data from init()
* @channel: secure channel
* @an: association number
* Returns: 0 on success, -1 on failure
*/
int (*disable_transmit_sa)(void *priv, u32 channel, u8 an);
#endif /* CONFIG_MACSEC */
};
/**
* enum wpa_event_type - Event type for wpa_supplicant_event() calls
*/
enum wpa_event_type {
/**
* EVENT_ASSOC - Association completed
*
* This event needs to be delivered when the driver completes IEEE
* 802.11 association or reassociation successfully.
* wpa_driver_ops::get_bssid() is expected to provide the current BSSID
* after this event has been generated. In addition, optional
* EVENT_ASSOCINFO may be generated just before EVENT_ASSOC to provide
* more information about the association. If the driver interface gets
* both of these events at the same time, it can also include the
* assoc_info data in EVENT_ASSOC call.
*/
EVENT_ASSOC,
/**
* EVENT_DISASSOC - Association lost
*
* This event should be called when association is lost either due to
* receiving deauthenticate or disassociate frame from the AP or when
* sending either of these frames to the current AP. If the driver
* supports separate deauthentication event, EVENT_DISASSOC should only
* be used for disassociation and EVENT_DEAUTH for deauthentication.
* In AP mode, union wpa_event_data::disassoc_info is required.
*/
EVENT_DISASSOC,
/**
* EVENT_MICHAEL_MIC_FAILURE - Michael MIC (TKIP) detected
*
* This event must be delivered when a Michael MIC error is detected by
* the local driver. Additional data for event processing is
* provided with union wpa_event_data::michael_mic_failure. This
* information is used to request new encyption key and to initiate
* TKIP countermeasures if needed.
*/
EVENT_MICHAEL_MIC_FAILURE,
/**
* EVENT_SCAN_RESULTS - Scan results available
*
* This event must be called whenever scan results are available to be
* fetched with struct wpa_driver_ops::get_scan_results(). This event
* is expected to be used some time after struct wpa_driver_ops::scan()
* is called. If the driver provides an unsolicited event when the scan
* has been completed, this event can be used to trigger
* EVENT_SCAN_RESULTS call. If such event is not available from the
* driver, the driver wrapper code is expected to use a registered
* timeout to generate EVENT_SCAN_RESULTS call after the time that the
* scan is expected to be completed. Optional information about
* completed scan can be provided with union wpa_event_data::scan_info.
*/
EVENT_SCAN_RESULTS,
/**
* EVENT_ASSOCINFO - Report optional extra information for association
*
* This event can be used to report extra association information for
* EVENT_ASSOC processing. This extra information includes IEs from
* association frames and Beacon/Probe Response frames in union
* wpa_event_data::assoc_info. EVENT_ASSOCINFO must be send just before
* EVENT_ASSOC. Alternatively, the driver interface can include
* assoc_info data in the EVENT_ASSOC call if it has all the
* information available at the same point.
*/
EVENT_ASSOCINFO,
/**
* EVENT_INTERFACE_STATUS - Report interface status changes
*
* This optional event can be used to report changes in interface
* status (interface added/removed) using union
* wpa_event_data::interface_status. This can be used to trigger
* wpa_supplicant to stop and re-start processing for the interface,
* e.g., when a cardbus card is ejected/inserted.
*/
EVENT_INTERFACE_STATUS,
/**
* EVENT_PMKID_CANDIDATE - Report a candidate AP for pre-authentication
*
* This event can be used to inform wpa_supplicant about candidates for
* RSN (WPA2) pre-authentication. If wpa_supplicant is not responsible
* for scan request (ap_scan=2 mode), this event is required for
* pre-authentication. If wpa_supplicant is performing scan request
* (ap_scan=1), this event is optional since scan results can be used
* to add pre-authentication candidates. union
* wpa_event_data::pmkid_candidate is used to report the BSSID of the
* candidate and priority of the candidate, e.g., based on the signal
* strength, in order to try to pre-authenticate first with candidates
* that are most likely targets for re-association.
*
* EVENT_PMKID_CANDIDATE can be called whenever the driver has updates
* on the candidate list. In addition, it can be called for the current
* AP and APs that have existing PMKSA cache entries. wpa_supplicant
* will automatically skip pre-authentication in cases where a valid
* PMKSA exists. When more than one candidate exists, this event should
* be generated once for each candidate.
*
* Driver will be notified about successful pre-authentication with
* struct wpa_driver_ops::add_pmkid() calls.
*/
EVENT_PMKID_CANDIDATE,
/**
* EVENT_STKSTART - Request STK handshake (MLME-STKSTART.request)
*
* This event can be used to inform wpa_supplicant about desire to set
* up secure direct link connection between two stations as defined in
* IEEE 802.11e with a new PeerKey mechanism that replaced the original
* STAKey negotiation. The caller will need to set peer address for the
* event.
*/
EVENT_STKSTART,
/**
* EVENT_TDLS - Request TDLS operation
*
* This event can be used to request a TDLS operation to be performed.
*/
EVENT_TDLS,
/**
* EVENT_FT_RESPONSE - Report FT (IEEE 802.11r) response IEs
*
* The driver is expected to report the received FT IEs from
* FT authentication sequence from the AP. The FT IEs are included in
* the extra information in union wpa_event_data::ft_ies.
*/
EVENT_FT_RESPONSE,
/**
* EVENT_IBSS_RSN_START - Request RSN authentication in IBSS
*
* The driver can use this event to inform wpa_supplicant about a STA
* in an IBSS with which protected frames could be exchanged. This
* event starts RSN authentication with the other STA to authenticate
* the STA and set up encryption keys with it.
*/
EVENT_IBSS_RSN_START,
/**
* EVENT_AUTH - Authentication result
*
* This event should be called when authentication attempt has been
* completed. This is only used if the driver supports separate
* authentication step (struct wpa_driver_ops::authenticate).
* Information about authentication result is included in
* union wpa_event_data::auth.
*/
EVENT_AUTH,
/**
* EVENT_DEAUTH - Authentication lost
*
* This event should be called when authentication is lost either due
* to receiving deauthenticate frame from the AP or when sending that
* frame to the current AP.
* In AP mode, union wpa_event_data::deauth_info is required.
*/
EVENT_DEAUTH,
/**
* EVENT_ASSOC_REJECT - Association rejected
*
* This event should be called when (re)association attempt has been
* rejected by the AP. Information about the association response is
* included in union wpa_event_data::assoc_reject.
*/
EVENT_ASSOC_REJECT,
/**
* EVENT_AUTH_TIMED_OUT - Authentication timed out
*/
EVENT_AUTH_TIMED_OUT,
/**
* EVENT_ASSOC_TIMED_OUT - Association timed out
*/
EVENT_ASSOC_TIMED_OUT,
/**
* EVENT_FT_RRB_RX - FT (IEEE 802.11r) RRB frame received
*/
EVENT_FT_RRB_RX,
/**
* EVENT_WPS_BUTTON_PUSHED - Report hardware push button press for WPS
*/
EVENT_WPS_BUTTON_PUSHED,
/**
* EVENT_TX_STATUS - Report TX status
*/
EVENT_TX_STATUS,
/**
* EVENT_RX_FROM_UNKNOWN - Report RX from unknown STA
*/
EVENT_RX_FROM_UNKNOWN,
/**
* EVENT_RX_MGMT - Report RX of a management frame
*/
EVENT_RX_MGMT,
/**
* EVENT_REMAIN_ON_CHANNEL - Remain-on-channel duration started
*
* This event is used to indicate when the driver has started the
* requested remain-on-channel duration. Information about the
* operation is included in union wpa_event_data::remain_on_channel.
*/
EVENT_REMAIN_ON_CHANNEL,
/**
* EVENT_CANCEL_REMAIN_ON_CHANNEL - Remain-on-channel timed out
*
* This event is used to indicate when the driver has completed
* remain-on-channel duration, i.e., may noot be available on the
* requested channel anymore. Information about the
* operation is included in union wpa_event_data::remain_on_channel.
*/
EVENT_CANCEL_REMAIN_ON_CHANNEL,
/**
* EVENT_MLME_RX - Report reception of frame for MLME (test use only)
*
* This event is used only by driver_test.c and userspace MLME.
*/
EVENT_MLME_RX,
/**
* EVENT_RX_PROBE_REQ - Indicate received Probe Request frame
*
* This event is used to indicate when a Probe Request frame has been
* received. Information about the received frame is included in
* union wpa_event_data::rx_probe_req. The driver is required to report
* these events only after successfully completed probe_req_report()
* commands to request the events (i.e., report parameter is non-zero)
* in station mode. In AP mode, Probe Request frames should always be
* reported.
*/
EVENT_RX_PROBE_REQ,
/**
* EVENT_NEW_STA - New wired device noticed
*
* This event is used to indicate that a new device has been detected
* in a network that does not use association-like functionality (i.e.,
* mainly wired Ethernet). This can be used to start EAPOL
* authenticator when receiving a frame from a device. The address of
* the device is included in union wpa_event_data::new_sta.
*/
EVENT_NEW_STA,
/**
* EVENT_EAPOL_RX - Report received EAPOL frame
*
* When in AP mode with hostapd, this event is required to be used to
* deliver the receive EAPOL frames from the driver. With
* %wpa_supplicant, this event is used only if the send_eapol() handler
* is used to override the use of l2_packet for EAPOL frame TX.
*/
EVENT_EAPOL_RX,
/**
* EVENT_SIGNAL_CHANGE - Indicate change in signal strength
*
* This event is used to indicate changes in the signal strength
* observed in frames received from the current AP if signal strength
* monitoring has been enabled with signal_monitor().
*/
EVENT_SIGNAL_CHANGE,
/**
* EVENT_INTERFACE_ENABLED - Notify that interface was enabled
*
* This event is used to indicate that the interface was enabled after
* having been previously disabled, e.g., due to rfkill.
*/
EVENT_INTERFACE_ENABLED,
/**
* EVENT_INTERFACE_DISABLED - Notify that interface was disabled
*
* This event is used to indicate that the interface was disabled,
* e.g., due to rfkill.
*/
EVENT_INTERFACE_DISABLED,
/**
* EVENT_CHANNEL_LIST_CHANGED - Channel list changed
*
* This event is used to indicate that the channel list has changed,
* e.g., because of a regulatory domain change triggered by scan
* results including an AP advertising a country code.
*/
EVENT_CHANNEL_LIST_CHANGED,
/**
* EVENT_INTERFACE_UNAVAILABLE - Notify that interface is unavailable
*
* This event is used to indicate that the driver cannot maintain this
* interface in its operation mode anymore. The most likely use for
* this is to indicate that AP mode operation is not available due to
* operating channel would need to be changed to a DFS channel when
* the driver does not support radar detection and another virtual
* interfaces caused the operating channel to change. Other similar
* resource conflicts could also trigger this for station mode
* interfaces. This event can be propagated when channel switching
* fails.
*/
EVENT_INTERFACE_UNAVAILABLE,
/**
* EVENT_BEST_CHANNEL
*
* Driver generates this event whenever it detects a better channel
* (e.g., based on RSSI or channel use). This information can be used
* to improve channel selection for a new AP/P2P group.
*/
EVENT_BEST_CHANNEL,
/**
* EVENT_UNPROT_DEAUTH - Unprotected Deauthentication frame received
*
* This event should be called when a Deauthentication frame is dropped
* due to it not being protected (MFP/IEEE 802.11w).
* union wpa_event_data::unprot_deauth is required to provide more
* details of the frame.
*/
EVENT_UNPROT_DEAUTH,
/**
* EVENT_UNPROT_DISASSOC - Unprotected Disassociation frame received
*
* This event should be called when a Disassociation frame is dropped
* due to it not being protected (MFP/IEEE 802.11w).
* union wpa_event_data::unprot_disassoc is required to provide more
* details of the frame.
*/
EVENT_UNPROT_DISASSOC,
/**
* EVENT_STATION_LOW_ACK
*
* Driver generates this event whenever it detected that a particular
* station was lost. Detection can be through massive transmission
* failures for example.
*/
EVENT_STATION_LOW_ACK,
/**
* EVENT_IBSS_PEER_LOST - IBSS peer not reachable anymore
*/
EVENT_IBSS_PEER_LOST,
/**
* EVENT_DRIVER_GTK_REKEY - Device/driver did GTK rekey
*
* This event carries the new replay counter to notify wpa_supplicant
* of the current EAPOL-Key Replay Counter in case the driver/firmware
* completed Group Key Handshake while the host (including
* wpa_supplicant was sleeping).
*/
EVENT_DRIVER_GTK_REKEY,
/**
* EVENT_SCHED_SCAN_STOPPED - Scheduled scan was stopped
*/
EVENT_SCHED_SCAN_STOPPED,
/**
* EVENT_DRIVER_CLIENT_POLL_OK - Station responded to poll
*
* This event indicates that the station responded to the poll
* initiated with @poll_client.
*/
EVENT_DRIVER_CLIENT_POLL_OK,
/**
* EVENT_EAPOL_TX_STATUS - notify of EAPOL TX status
*/
EVENT_EAPOL_TX_STATUS,
/**
* EVENT_CH_SWITCH - AP or GO decided to switch channels
*
* Described in wpa_event_data.ch_switch
* */
EVENT_CH_SWITCH,
/**
* EVENT_WNM - Request WNM operation
*
* This event can be used to request a WNM operation to be performed.
*/
EVENT_WNM,
/**
* EVENT_CONNECT_FAILED_REASON - Connection failure reason in AP mode
*
* This event indicates that the driver reported a connection failure
* with the specified client (for example, max client reached, etc.) in
* AP mode.
*/
EVENT_CONNECT_FAILED_REASON,
/**
* EVENT_RADAR_DETECTED - Notify of radar detection
*
* A radar has been detected on the supplied frequency, hostapd should
* react accordingly (e.g., change channel).
*/
EVENT_DFS_RADAR_DETECTED,
/**
* EVENT_CAC_FINISHED - Notify that channel availability check has been completed
*
* After a successful CAC, the channel can be marked clear and used.
*/
EVENT_DFS_CAC_FINISHED,
/**
* EVENT_CAC_ABORTED - Notify that channel availability check has been aborted
*
* The CAC was not successful, and the channel remains in the previous
* state. This may happen due to a radar beeing detected or other
* external influences.
*/
EVENT_DFS_CAC_ABORTED,
/**
* EVENT_DFS_CAC_NOP_FINISHED - Notify that non-occupancy period is over
*
* The channel which was previously unavailable is now available again.
*/
EVENT_DFS_NOP_FINISHED,
/**
* EVENT_SURVEY - Received survey data
*
* This event gets triggered when a driver query is issued for survey
* data and the requested data becomes available. The returned data is
* stored in struct survey_results. The results provide at most one
* survey entry for each frequency and at minimum will provide one
* survey entry for one frequency. The survey data can be os_malloc()'d
* and then os_free()'d, so the event callback must only copy data.
*/
EVENT_SURVEY,
/**
* EVENT_SCAN_STARTED - Scan started
*
* This indicates that driver has started a scan operation either based
* on a request from wpa_supplicant/hostapd or from another application.
* EVENT_SCAN_RESULTS is used to indicate when the scan has been
* completed (either successfully or by getting cancelled).
*/
EVENT_SCAN_STARTED,
/**
* EVENT_AVOID_FREQUENCIES - Received avoid frequency range
*
* This event indicates a set of frequency ranges that should be avoided
* to reduce issues due to interference or internal co-existence
* information in the driver.
*/
EVENT_AVOID_FREQUENCIES
};
/**
* struct freq_survey - Channel survey info
*
* @ifidx: Interface index in which this survey was observed
* @freq: Center of frequency of the surveyed channel
* @nf: Channel noise floor in dBm
* @channel_time: Amount of time in ms the radio spent on the channel
* @channel_time_busy: Amount of time in ms the radio detected some signal
* that indicated to the radio the channel was not clear
* @channel_time_rx: Amount of time the radio spent receiving data
* @channel_time_tx: Amount of time the radio spent transmitting data
* @filled: bitmask indicating which fields have been reported, see
* SURVEY_HAS_* defines.
* @list: Internal list pointers
*/
struct freq_survey {
u32 ifidx;
unsigned int freq;
s8 nf;
u64 channel_time;
u64 channel_time_busy;
u64 channel_time_rx;
u64 channel_time_tx;
unsigned int filled;
struct dl_list list;
};
#define SURVEY_HAS_NF BIT(0)
#define SURVEY_HAS_CHAN_TIME BIT(1)
#define SURVEY_HAS_CHAN_TIME_BUSY BIT(2)
#define SURVEY_HAS_CHAN_TIME_RX BIT(3)
#define SURVEY_HAS_CHAN_TIME_TX BIT(4)
/**
* union wpa_event_data - Additional data for wpa_supplicant_event() calls
*/
union wpa_event_data {
/**
* struct assoc_info - Data for EVENT_ASSOC and EVENT_ASSOCINFO events
*
* This structure is optional for EVENT_ASSOC calls and required for
* EVENT_ASSOCINFO calls. By using EVENT_ASSOC with this data, the
* driver interface does not need to generate separate EVENT_ASSOCINFO
* calls.
*/
struct assoc_info {
/**
* reassoc - Flag to indicate association or reassociation
*/
int reassoc;
/**
* req_ies - (Re)Association Request IEs
*
* If the driver generates WPA/RSN IE, this event data must be
* returned for WPA handshake to have needed information. If
* wpa_supplicant-generated WPA/RSN IE is used, this
* information event is optional.
*
* This should start with the first IE (fixed fields before IEs
* are not included).
*/
const u8 *req_ies;
/**
* req_ies_len - Length of req_ies in bytes
*/
size_t req_ies_len;
/**
* resp_ies - (Re)Association Response IEs
*
* Optional association data from the driver. This data is not
* required WPA, but may be useful for some protocols and as
* such, should be reported if this is available to the driver
* interface.
*
* This should start with the first IE (fixed fields before IEs
* are not included).
*/
const u8 *resp_ies;
/**
* resp_ies_len - Length of resp_ies in bytes
*/
size_t resp_ies_len;
/**
* beacon_ies - Beacon or Probe Response IEs
*
* Optional Beacon/ProbeResp data: IEs included in Beacon or
* Probe Response frames from the current AP (i.e., the one
* that the client just associated with). This information is
* used to update WPA/RSN IE for the AP. If this field is not
* set, the results from previous scan will be used. If no
* data for the new AP is found, scan results will be requested
* again (without scan request). At this point, the driver is
* expected to provide WPA/RSN IE for the AP (if WPA/WPA2 is
* used).
*
* This should start with the first IE (fixed fields before IEs
* are not included).
*/
const u8 *beacon_ies;
/**
* beacon_ies_len - Length of beacon_ies */
size_t beacon_ies_len;
/**
* freq - Frequency of the operational channel in MHz
*/
unsigned int freq;
/**
* addr - Station address (for AP mode)
*/
const u8 *addr;
} assoc_info;
/**
* struct disassoc_info - Data for EVENT_DISASSOC events
*/
struct disassoc_info {
/**
* addr - Station address (for AP mode)
*/
const u8 *addr;
/**
* reason_code - Reason Code (host byte order) used in
* Deauthentication frame
*/
u16 reason_code;
/**
* ie - Optional IE(s) in Disassociation frame
*/
const u8 *ie;
/**
* ie_len - Length of ie buffer in octets
*/
size_t ie_len;
/**
* locally_generated - Whether the frame was locally generated
*/
int locally_generated;
} disassoc_info;
/**
* struct deauth_info - Data for EVENT_DEAUTH events
*/
struct deauth_info {
/**
* addr - Station address (for AP mode)
*/
const u8 *addr;
/**
* reason_code - Reason Code (host byte order) used in
* Deauthentication frame
*/
u16 reason_code;
/**
* ie - Optional IE(s) in Deauthentication frame
*/
const u8 *ie;
/**
* ie_len - Length of ie buffer in octets
*/
size_t ie_len;
/**
* locally_generated - Whether the frame was locally generated
*/
int locally_generated;
} deauth_info;
/**
* struct michael_mic_failure - Data for EVENT_MICHAEL_MIC_FAILURE
*/
struct michael_mic_failure {
int unicast;
const u8 *src;
} michael_mic_failure;
/**
* struct interface_status - Data for EVENT_INTERFACE_STATUS
*/
struct interface_status {
char ifname[100];
enum {
EVENT_INTERFACE_ADDED, EVENT_INTERFACE_REMOVED
} ievent;
} interface_status;
/**
* struct pmkid_candidate - Data for EVENT_PMKID_CANDIDATE
*/
struct pmkid_candidate {
/** BSSID of the PMKID candidate */
u8 bssid[ETH_ALEN];
/** Smaller the index, higher the priority */
int index;
/** Whether RSN IE includes pre-authenticate flag */
int preauth;
} pmkid_candidate;
/**
* struct stkstart - Data for EVENT_STKSTART
*/
struct stkstart {
u8 peer[ETH_ALEN];
} stkstart;
/**
* struct tdls - Data for EVENT_TDLS
*/
struct tdls {
u8 peer[ETH_ALEN];
enum {
TDLS_REQUEST_SETUP,
TDLS_REQUEST_TEARDOWN
} oper;
u16 reason_code; /* for teardown */
} tdls;
/**
* struct wnm - Data for EVENT_WNM
*/
struct wnm {
u8 addr[ETH_ALEN];
enum {
WNM_OPER_SLEEP,
} oper;
enum {
WNM_SLEEP_ENTER,
WNM_SLEEP_EXIT
} sleep_action;
int sleep_intval;
u16 reason_code;
u8 *buf;
u16 buf_len;
} wnm;
/**
* struct ft_ies - FT information elements (EVENT_FT_RESPONSE)
*
* During FT (IEEE 802.11r) authentication sequence, the driver is
* expected to use this event to report received FT IEs (MDIE, FTIE,
* RSN IE, TIE, possible resource request) to the supplicant. The FT
* IEs for the next message will be delivered through the
* struct wpa_driver_ops::update_ft_ies() callback.
*/
struct ft_ies {
const u8 *ies;
size_t ies_len;
int ft_action;
u8 target_ap[ETH_ALEN];
/** Optional IE(s), e.g., WMM TSPEC(s), for RIC-Request */
const u8 *ric_ies;
/** Length of ric_ies buffer in octets */
size_t ric_ies_len;
} ft_ies;
/**
* struct ibss_rsn_start - Data for EVENT_IBSS_RSN_START
*/
struct ibss_rsn_start {
u8 peer[ETH_ALEN];
} ibss_rsn_start;
/**
* struct auth_info - Data for EVENT_AUTH events
*/
struct auth_info {
u8 peer[ETH_ALEN];
u8 bssid[ETH_ALEN];
u16 auth_type;
u16 auth_transaction;
u16 status_code;
const u8 *ies;
size_t ies_len;
} auth;
/**
* struct assoc_reject - Data for EVENT_ASSOC_REJECT events
*/
struct assoc_reject {
/**
* bssid - BSSID of the AP that rejected association
*/
const u8 *bssid;
/**
* resp_ies - (Re)Association Response IEs
*
* Optional association data from the driver. This data is not
* required WPA, but may be useful for some protocols and as
* such, should be reported if this is available to the driver
* interface.
*
* This should start with the first IE (fixed fields before IEs
* are not included).
*/
const u8 *resp_ies;
/**
* resp_ies_len - Length of resp_ies in bytes
*/
size_t resp_ies_len;
/**
* status_code - Status Code from (Re)association Response
*/
u16 status_code;
} assoc_reject;
struct timeout_event {
u8 addr[ETH_ALEN];
} timeout_event;
/**
* struct ft_rrb_rx - Data for EVENT_FT_RRB_RX events
*/
struct ft_rrb_rx {
const u8 *src;
const u8 *data;
size_t data_len;
} ft_rrb_rx;
/**
* struct tx_status - Data for EVENT_TX_STATUS events
*/
struct tx_status {
u16 type;
u16 stype;
const u8 *dst;
const u8 *data;
size_t data_len;
int ack;
} tx_status;
/**
* struct rx_from_unknown - Data for EVENT_RX_FROM_UNKNOWN events
*/
struct rx_from_unknown {
const u8 *bssid;
const u8 *addr;
int wds;
} rx_from_unknown;
/**
* struct rx_mgmt - Data for EVENT_RX_MGMT events
*/
struct rx_mgmt {
const u8 *frame;
size_t frame_len;
u32 datarate;
/**
* drv_priv - Pointer to store driver private BSS information
*
* If not set to NULL, this is used for comparison with
* hostapd_data->drv_priv to determine which BSS should process
* the frame.
*/
void *drv_priv;
/**
* freq - Frequency (in MHz) on which the frame was received
*/
int freq;
/**
* ssi_signal - Signal strength in dBm (or 0 if not available)
*/
int ssi_signal;
} rx_mgmt;
/**
* struct remain_on_channel - Data for EVENT_REMAIN_ON_CHANNEL events
*
* This is also used with EVENT_CANCEL_REMAIN_ON_CHANNEL events.
*/
struct remain_on_channel {
/**
* freq - Channel frequency in MHz
*/
unsigned int freq;
/**
* duration - Duration to remain on the channel in milliseconds
*/
unsigned int duration;
} remain_on_channel;
/**
* struct scan_info - Optional data for EVENT_SCAN_RESULTS events
* @aborted: Whether the scan was aborted
* @freqs: Scanned frequencies in MHz (%NULL = all channels scanned)
* @num_freqs: Number of entries in freqs array
* @ssids: Scanned SSIDs (%NULL or zero-length SSID indicates wildcard
* SSID)
* @num_ssids: Number of entries in ssids array
*/
struct scan_info {
int aborted;
const int *freqs;
size_t num_freqs;
struct wpa_driver_scan_ssid ssids[WPAS_MAX_SCAN_SSIDS];
size_t num_ssids;
} scan_info;
/**
* struct mlme_rx - Data for EVENT_MLME_RX events
*/
struct mlme_rx {
const u8 *buf;
size_t len;
int freq;
int channel;
int ssi;
} mlme_rx;
/**
* struct rx_probe_req - Data for EVENT_RX_PROBE_REQ events
*/
struct rx_probe_req {
/**
* sa - Source address of the received Probe Request frame
*/
const u8 *sa;
/**
* da - Destination address of the received Probe Request frame
* or %NULL if not available
*/
const u8 *da;
/**
* bssid - BSSID of the received Probe Request frame or %NULL
* if not available
*/
const u8 *bssid;
/**
* ie - IEs from the Probe Request body
*/
const u8 *ie;
/**
* ie_len - Length of ie buffer in octets
*/
size_t ie_len;
/**
* signal - signal strength in dBm (or 0 if not available)
*/
int ssi_signal;
} rx_probe_req;
/**
* struct new_sta - Data for EVENT_NEW_STA events
*/
struct new_sta {
const u8 *addr;
} new_sta;
/**
* struct eapol_rx - Data for EVENT_EAPOL_RX events
*/
struct eapol_rx {
const u8 *src;
const u8 *data;
size_t data_len;
} eapol_rx;
/**
* signal_change - Data for EVENT_SIGNAL_CHANGE events
*/
struct wpa_signal_info signal_change;
/**
* struct best_channel - Data for EVENT_BEST_CHANNEL events
* @freq_24: Best 2.4 GHz band channel frequency in MHz
* @freq_5: Best 5 GHz band channel frequency in MHz
* @freq_overall: Best channel frequency in MHz
*
* 0 can be used to indicate no preference in either band.
*/
struct best_channel {
int freq_24;
int freq_5;
int freq_overall;
} best_chan;
struct unprot_deauth {
const u8 *sa;
const u8 *da;
u16 reason_code;
} unprot_deauth;
struct unprot_disassoc {
const u8 *sa;
const u8 *da;
u16 reason_code;
} unprot_disassoc;
/**
* struct low_ack - Data for EVENT_STATION_LOW_ACK events
* @addr: station address
*/
struct low_ack {
u8 addr[ETH_ALEN];
} low_ack;
/**
* struct ibss_peer_lost - Data for EVENT_IBSS_PEER_LOST
*/
struct ibss_peer_lost {
u8 peer[ETH_ALEN];
} ibss_peer_lost;
/**
* struct driver_gtk_rekey - Data for EVENT_DRIVER_GTK_REKEY
*/
struct driver_gtk_rekey {
const u8 *bssid;
const u8 *replay_ctr;
} driver_gtk_rekey;
/**
* struct client_poll - Data for EVENT_DRIVER_CLIENT_POLL_OK events
* @addr: station address
*/
struct client_poll {
u8 addr[ETH_ALEN];
} client_poll;
/**
* struct eapol_tx_status
* @dst: Original destination
* @data: Data starting with IEEE 802.1X header (!)
* @data_len: Length of data
* @ack: Indicates ack or lost frame
*
* This corresponds to hapd_send_eapol if the frame sent
* there isn't just reported as EVENT_TX_STATUS.
*/
struct eapol_tx_status {
const u8 *dst;
const u8 *data;
int data_len;
int ack;
} eapol_tx_status;
/**
* struct ch_switch
* @freq: Frequency of new channel in MHz
* @ht_enabled: Whether this is an HT channel
* @ch_offset: Secondary channel offset
* @ch_width: Channel width
* @cf1: Center frequency 1
* @cf2: Center frequency 2
*/
struct ch_switch {
int freq;
int ht_enabled;
int ch_offset;
enum chan_width ch_width;
int cf1;
int cf2;
} ch_switch;
/**
* struct connect_failed - Data for EVENT_CONNECT_FAILED_REASON
* @addr: Remote client address
* @code: Reason code for connection failure
*/
struct connect_failed_reason {
u8 addr[ETH_ALEN];
enum {
MAX_CLIENT_REACHED,
BLOCKED_CLIENT
} code;
} connect_failed_reason;
/**
* struct dfs_event - Data for radar detected events
* @freq: Frequency of the channel in MHz
*/
struct dfs_event {
int freq;
int ht_enabled;
int chan_offset;
enum chan_width chan_width;
int cf1;
int cf2;
} dfs_event;
/**
* survey_results - Survey result data for EVENT_SURVEY
* @freq_filter: Requested frequency survey filter, 0 if request
* was for all survey data
* @survey_list: Linked list of survey data
*/
struct survey_results {
unsigned int freq_filter;
struct dl_list survey_list; /* struct freq_survey */
} survey_results;
/**
* channel_list_changed - Data for EVENT_CHANNEL_LIST_CHANGED
* @initiator: Initiator of the regulatory change
* @type: Regulatory change type
* @alpha2: Country code (or "" if not available)
*/
struct channel_list_changed {
enum reg_change_initiator initiator;
enum reg_type type;
char alpha2[3];
} channel_list_changed;
/**
* freq_range - List of frequency ranges
*
* This is used as the data with EVENT_AVOID_FREQUENCIES.
*/
struct wpa_freq_range_list freq_range;
};
/**
* wpa_supplicant_event - Report a driver event for wpa_supplicant
* @ctx: Context pointer (wpa_s); this is the ctx variable registered
* with struct wpa_driver_ops::init()
* @event: event type (defined above)
* @data: possible extra data for the event
*
* Driver wrapper code should call this function whenever an event is received
* from the driver.
*/
void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
union wpa_event_data *data);
/*
* The following inline functions are provided for convenience to simplify
* event indication for some of the common events.
*/
static inline void drv_event_assoc(void *ctx, const u8 *addr, const u8 *ie,
size_t ielen, int reassoc)
{
union wpa_event_data event;
os_memset(&event, 0, sizeof(event));
event.assoc_info.reassoc = reassoc;
event.assoc_info.req_ies = ie;
event.assoc_info.req_ies_len = ielen;
event.assoc_info.addr = addr;
wpa_supplicant_event(ctx, EVENT_ASSOC, &event);
}
static inline void drv_event_disassoc(void *ctx, const u8 *addr)
{
union wpa_event_data event;
os_memset(&event, 0, sizeof(event));
event.disassoc_info.addr = addr;
wpa_supplicant_event(ctx, EVENT_DISASSOC, &event);
}
static inline void drv_event_eapol_rx(void *ctx, const u8 *src, const u8 *data,
size_t data_len)
{
union wpa_event_data event;
os_memset(&event, 0, sizeof(event));
event.eapol_rx.src = src;
event.eapol_rx.data = data;
event.eapol_rx.data_len = data_len;
wpa_supplicant_event(ctx, EVENT_EAPOL_RX, &event);
}
/* driver_common.c */
void wpa_scan_results_free(struct wpa_scan_results *res);
/* Convert wpa_event_type to a string for logging */
const char * event_to_string(enum wpa_event_type event);
/* NULL terminated array of linked in driver wrappers */
extern struct wpa_driver_ops *wpa_drivers[];
#endif /* DRIVER_H */