//===-- MipsConstantIslandPass.cpp - Emit Pc Relative loads----------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
//
// This pass is used to make Pc relative loads of constants.
// For now, only Mips16 will use this.
//
// Loading constants inline is expensive on Mips16 and it's in general better
// to place the constant nearby in code space and then it can be loaded with a
// simple 16 bit load instruction.
//
// The constants can be not just numbers but addresses of functions and labels.
// This can be particularly helpful in static relocation mode for embedded
// non-linux targets.
//
//
#include "Mips.h"
#include "MCTargetDesc/MipsBaseInfo.h"
#include "Mips16InstrInfo.h"
#include "MipsMachineFunction.h"
#include "MipsTargetMachine.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/CodeGen/MachineBasicBlock.h"
#include "llvm/CodeGen/MachineFunctionPass.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/IR/Function.h"
#include "llvm/IR/InstIterator.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/Format.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetInstrInfo.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Target/TargetRegisterInfo.h"
#include <algorithm>
using namespace llvm;
#define DEBUG_TYPE "mips-constant-islands"
STATISTIC(NumCPEs, "Number of constpool entries");
STATISTIC(NumSplit, "Number of uncond branches inserted");
STATISTIC(NumCBrFixed, "Number of cond branches fixed");
STATISTIC(NumUBrFixed, "Number of uncond branches fixed");
// FIXME: This option should be removed once it has received sufficient testing.
static cl::opt<bool>
AlignConstantIslands("mips-align-constant-islands", cl::Hidden, cl::init(true),
cl::desc("Align constant islands in code"));
// Rather than do make check tests with huge amounts of code, we force
// the test to use this amount.
//
static cl::opt<int> ConstantIslandsSmallOffset(
"mips-constant-islands-small-offset",
cl::init(0),
cl::desc("Make small offsets be this amount for testing purposes"),
cl::Hidden);
//
// For testing purposes we tell it to not use relaxed load forms so that it
// will split blocks.
//
static cl::opt<bool> NoLoadRelaxation(
"mips-constant-islands-no-load-relaxation",
cl::init(false),
cl::desc("Don't relax loads to long loads - for testing purposes"),
cl::Hidden);
static unsigned int branchTargetOperand(MachineInstr *MI) {
switch (MI->getOpcode()) {
case Mips::Bimm16:
case Mips::BimmX16:
case Mips::Bteqz16:
case Mips::BteqzX16:
case Mips::Btnez16:
case Mips::BtnezX16:
case Mips::JalB16:
return 0;
case Mips::BeqzRxImm16:
case Mips::BeqzRxImmX16:
case Mips::BnezRxImm16:
case Mips::BnezRxImmX16:
return 1;
}
llvm_unreachable("Unknown branch type");
}
static bool isUnconditionalBranch(unsigned int Opcode) {
switch (Opcode) {
default: return false;
case Mips::Bimm16:
case Mips::BimmX16:
case Mips::JalB16:
return true;
}
}
static unsigned int longformBranchOpcode(unsigned int Opcode) {
switch (Opcode) {
case Mips::Bimm16:
case Mips::BimmX16:
return Mips::BimmX16;
case Mips::Bteqz16:
case Mips::BteqzX16:
return Mips::BteqzX16;
case Mips::Btnez16:
case Mips::BtnezX16:
return Mips::BtnezX16;
case Mips::JalB16:
return Mips::JalB16;
case Mips::BeqzRxImm16:
case Mips::BeqzRxImmX16:
return Mips::BeqzRxImmX16;
case Mips::BnezRxImm16:
case Mips::BnezRxImmX16:
return Mips::BnezRxImmX16;
}
llvm_unreachable("Unknown branch type");
}
//
// FIXME: need to go through this whole constant islands port and check the math
// for branch ranges and clean this up and make some functions to calculate things
// that are done many times identically.
// Need to refactor some of the code to call this routine.
//
static unsigned int branchMaxOffsets(unsigned int Opcode) {
unsigned Bits, Scale;
switch (Opcode) {
case Mips::Bimm16:
Bits = 11;
Scale = 2;
break;
case Mips::BimmX16:
Bits = 16;
Scale = 2;
break;
case Mips::BeqzRxImm16:
Bits = 8;
Scale = 2;
break;
case Mips::BeqzRxImmX16:
Bits = 16;
Scale = 2;
break;
case Mips::BnezRxImm16:
Bits = 8;
Scale = 2;
break;
case Mips::BnezRxImmX16:
Bits = 16;
Scale = 2;
break;
case Mips::Bteqz16:
Bits = 8;
Scale = 2;
break;
case Mips::BteqzX16:
Bits = 16;
Scale = 2;
break;
case Mips::Btnez16:
Bits = 8;
Scale = 2;
break;
case Mips::BtnezX16:
Bits = 16;
Scale = 2;
break;
default:
llvm_unreachable("Unknown branch type");
}
unsigned MaxOffs = ((1 << (Bits-1))-1) * Scale;
return MaxOffs;
}
namespace {
typedef MachineBasicBlock::iterator Iter;
typedef MachineBasicBlock::reverse_iterator ReverseIter;
/// MipsConstantIslands - Due to limited PC-relative displacements, Mips
/// requires constant pool entries to be scattered among the instructions
/// inside a function. To do this, it completely ignores the normal LLVM
/// constant pool; instead, it places constants wherever it feels like with
/// special instructions.
///
/// The terminology used in this pass includes:
/// Islands - Clumps of constants placed in the function.
/// Water - Potential places where an island could be formed.
/// CPE - A constant pool entry that has been placed somewhere, which
/// tracks a list of users.
class MipsConstantIslands : public MachineFunctionPass {
/// BasicBlockInfo - Information about the offset and size of a single
/// basic block.
struct BasicBlockInfo {
/// Offset - Distance from the beginning of the function to the beginning
/// of this basic block.
///
/// Offsets are computed assuming worst case padding before an aligned
/// block. This means that subtracting basic block offsets always gives a
/// conservative estimate of the real distance which may be smaller.
///
/// Because worst case padding is used, the computed offset of an aligned
/// block may not actually be aligned.
unsigned Offset;
/// Size - Size of the basic block in bytes. If the block contains
/// inline assembly, this is a worst case estimate.
///
/// The size does not include any alignment padding whether from the
/// beginning of the block, or from an aligned jump table at the end.
unsigned Size;
// FIXME: ignore LogAlign for this patch
//
unsigned postOffset(unsigned LogAlign = 0) const {
unsigned PO = Offset + Size;
return PO;
}
BasicBlockInfo() : Offset(0), Size(0) {}
};
std::vector<BasicBlockInfo> BBInfo;
/// WaterList - A sorted list of basic blocks where islands could be placed
/// (i.e. blocks that don't fall through to the following block, due
/// to a return, unreachable, or unconditional branch).
std::vector<MachineBasicBlock*> WaterList;
/// NewWaterList - The subset of WaterList that was created since the
/// previous iteration by inserting unconditional branches.
SmallSet<MachineBasicBlock*, 4> NewWaterList;
typedef std::vector<MachineBasicBlock*>::iterator water_iterator;
/// CPUser - One user of a constant pool, keeping the machine instruction
/// pointer, the constant pool being referenced, and the max displacement
/// allowed from the instruction to the CP. The HighWaterMark records the
/// highest basic block where a new CPEntry can be placed. To ensure this
/// pass terminates, the CP entries are initially placed at the end of the
/// function and then move monotonically to lower addresses. The
/// exception to this rule is when the current CP entry for a particular
/// CPUser is out of range, but there is another CP entry for the same
/// constant value in range. We want to use the existing in-range CP
/// entry, but if it later moves out of range, the search for new water
/// should resume where it left off. The HighWaterMark is used to record
/// that point.
struct CPUser {
MachineInstr *MI;
MachineInstr *CPEMI;
MachineBasicBlock *HighWaterMark;
private:
unsigned MaxDisp;
unsigned LongFormMaxDisp; // mips16 has 16/32 bit instructions
// with different displacements
unsigned LongFormOpcode;
public:
bool NegOk;
CPUser(MachineInstr *mi, MachineInstr *cpemi, unsigned maxdisp,
bool neg,
unsigned longformmaxdisp, unsigned longformopcode)
: MI(mi), CPEMI(cpemi), MaxDisp(maxdisp),
LongFormMaxDisp(longformmaxdisp), LongFormOpcode(longformopcode),
NegOk(neg){
HighWaterMark = CPEMI->getParent();
}
/// getMaxDisp - Returns the maximum displacement supported by MI.
unsigned getMaxDisp() const {
unsigned xMaxDisp = ConstantIslandsSmallOffset?
ConstantIslandsSmallOffset: MaxDisp;
return xMaxDisp;
}
void setMaxDisp(unsigned val) {
MaxDisp = val;
}
unsigned getLongFormMaxDisp() const {
return LongFormMaxDisp;
}
unsigned getLongFormOpcode() const {
return LongFormOpcode;
}
};
/// CPUsers - Keep track of all of the machine instructions that use various
/// constant pools and their max displacement.
std::vector<CPUser> CPUsers;
/// CPEntry - One per constant pool entry, keeping the machine instruction
/// pointer, the constpool index, and the number of CPUser's which
/// reference this entry.
struct CPEntry {
MachineInstr *CPEMI;
unsigned CPI;
unsigned RefCount;
CPEntry(MachineInstr *cpemi, unsigned cpi, unsigned rc = 0)
: CPEMI(cpemi), CPI(cpi), RefCount(rc) {}
};
/// CPEntries - Keep track of all of the constant pool entry machine
/// instructions. For each original constpool index (i.e. those that
/// existed upon entry to this pass), it keeps a vector of entries.
/// Original elements are cloned as we go along; the clones are
/// put in the vector of the original element, but have distinct CPIs.
std::vector<std::vector<CPEntry> > CPEntries;
/// ImmBranch - One per immediate branch, keeping the machine instruction
/// pointer, conditional or unconditional, the max displacement,
/// and (if isCond is true) the corresponding unconditional branch
/// opcode.
struct ImmBranch {
MachineInstr *MI;
unsigned MaxDisp : 31;
bool isCond : 1;
int UncondBr;
ImmBranch(MachineInstr *mi, unsigned maxdisp, bool cond, int ubr)
: MI(mi), MaxDisp(maxdisp), isCond(cond), UncondBr(ubr) {}
};
/// ImmBranches - Keep track of all the immediate branch instructions.
///
std::vector<ImmBranch> ImmBranches;
/// HasFarJump - True if any far jump instruction has been emitted during
/// the branch fix up pass.
bool HasFarJump;
const TargetMachine &TM;
bool IsPIC;
unsigned ABI;
const MipsSubtarget *STI;
const Mips16InstrInfo *TII;
MipsFunctionInfo *MFI;
MachineFunction *MF;
MachineConstantPool *MCP;
unsigned PICLabelUId;
bool PrescannedForConstants;
void initPICLabelUId(unsigned UId) {
PICLabelUId = UId;
}
unsigned createPICLabelUId() {
return PICLabelUId++;
}
public:
static char ID;
MipsConstantIslands(TargetMachine &tm)
: MachineFunctionPass(ID), TM(tm),
IsPIC(TM.getRelocationModel() == Reloc::PIC_),
ABI(TM.getSubtarget<MipsSubtarget>().getTargetABI()),
STI(&TM.getSubtarget<MipsSubtarget>()), MF(nullptr), MCP(nullptr),
PrescannedForConstants(false){}
const char *getPassName() const override {
return "Mips Constant Islands";
}
bool runOnMachineFunction(MachineFunction &F) override;
void doInitialPlacement(std::vector<MachineInstr*> &CPEMIs);
CPEntry *findConstPoolEntry(unsigned CPI, const MachineInstr *CPEMI);
unsigned getCPELogAlign(const MachineInstr *CPEMI);
void initializeFunctionInfo(const std::vector<MachineInstr*> &CPEMIs);
unsigned getOffsetOf(MachineInstr *MI) const;
unsigned getUserOffset(CPUser&) const;
void dumpBBs();
bool isOffsetInRange(unsigned UserOffset, unsigned TrialOffset,
unsigned Disp, bool NegativeOK);
bool isOffsetInRange(unsigned UserOffset, unsigned TrialOffset,
const CPUser &U);
void computeBlockSize(MachineBasicBlock *MBB);
MachineBasicBlock *splitBlockBeforeInstr(MachineInstr *MI);
void updateForInsertedWaterBlock(MachineBasicBlock *NewBB);
void adjustBBOffsetsAfter(MachineBasicBlock *BB);
bool decrementCPEReferenceCount(unsigned CPI, MachineInstr* CPEMI);
int findInRangeCPEntry(CPUser& U, unsigned UserOffset);
int findLongFormInRangeCPEntry(CPUser& U, unsigned UserOffset);
bool findAvailableWater(CPUser&U, unsigned UserOffset,
water_iterator &WaterIter);
void createNewWater(unsigned CPUserIndex, unsigned UserOffset,
MachineBasicBlock *&NewMBB);
bool handleConstantPoolUser(unsigned CPUserIndex);
void removeDeadCPEMI(MachineInstr *CPEMI);
bool removeUnusedCPEntries();
bool isCPEntryInRange(MachineInstr *MI, unsigned UserOffset,
MachineInstr *CPEMI, unsigned Disp, bool NegOk,
bool DoDump = false);
bool isWaterInRange(unsigned UserOffset, MachineBasicBlock *Water,
CPUser &U, unsigned &Growth);
bool isBBInRange(MachineInstr *MI, MachineBasicBlock *BB, unsigned Disp);
bool fixupImmediateBr(ImmBranch &Br);
bool fixupConditionalBr(ImmBranch &Br);
bool fixupUnconditionalBr(ImmBranch &Br);
void prescanForConstants();
private:
};
char MipsConstantIslands::ID = 0;
} // end of anonymous namespace
bool MipsConstantIslands::isOffsetInRange
(unsigned UserOffset, unsigned TrialOffset,
const CPUser &U) {
return isOffsetInRange(UserOffset, TrialOffset,
U.getMaxDisp(), U.NegOk);
}
/// print block size and offset information - debugging
void MipsConstantIslands::dumpBBs() {
DEBUG({
for (unsigned J = 0, E = BBInfo.size(); J !=E; ++J) {
const BasicBlockInfo &BBI = BBInfo[J];
dbgs() << format("%08x BB#%u\t", BBI.Offset, J)
<< format(" size=%#x\n", BBInfo[J].Size);
}
});
}
/// createMipsLongBranchPass - Returns a pass that converts branches to long
/// branches.
FunctionPass *llvm::createMipsConstantIslandPass(MipsTargetMachine &tm) {
return new MipsConstantIslands(tm);
}
bool MipsConstantIslands::runOnMachineFunction(MachineFunction &mf) {
// The intention is for this to be a mips16 only pass for now
// FIXME:
MF = &mf;
MCP = mf.getConstantPool();
DEBUG(dbgs() << "constant island machine function " << "\n");
if (!TM.getSubtarget<MipsSubtarget>().inMips16Mode() ||
!MipsSubtarget::useConstantIslands()) {
return false;
}
TII = (const Mips16InstrInfo*)MF->getTarget().getInstrInfo();
MFI = MF->getInfo<MipsFunctionInfo>();
DEBUG(dbgs() << "constant island processing " << "\n");
//
// will need to make predermination if there is any constants we need to
// put in constant islands. TBD.
//
if (!PrescannedForConstants) prescanForConstants();
HasFarJump = false;
// This pass invalidates liveness information when it splits basic blocks.
MF->getRegInfo().invalidateLiveness();
// Renumber all of the machine basic blocks in the function, guaranteeing that
// the numbers agree with the position of the block in the function.
MF->RenumberBlocks();
bool MadeChange = false;
// Perform the initial placement of the constant pool entries. To start with,
// we put them all at the end of the function.
std::vector<MachineInstr*> CPEMIs;
if (!MCP->isEmpty())
doInitialPlacement(CPEMIs);
/// The next UID to take is the first unused one.
initPICLabelUId(CPEMIs.size());
// Do the initial scan of the function, building up information about the
// sizes of each block, the location of all the water, and finding all of the
// constant pool users.
initializeFunctionInfo(CPEMIs);
CPEMIs.clear();
DEBUG(dumpBBs());
/// Remove dead constant pool entries.
MadeChange |= removeUnusedCPEntries();
// Iteratively place constant pool entries and fix up branches until there
// is no change.
unsigned NoCPIters = 0, NoBRIters = 0;
(void)NoBRIters;
while (true) {
DEBUG(dbgs() << "Beginning CP iteration #" << NoCPIters << '\n');
bool CPChange = false;
for (unsigned i = 0, e = CPUsers.size(); i != e; ++i)
CPChange |= handleConstantPoolUser(i);
if (CPChange && ++NoCPIters > 30)
report_fatal_error("Constant Island pass failed to converge!");
DEBUG(dumpBBs());
// Clear NewWaterList now. If we split a block for branches, it should
// appear as "new water" for the next iteration of constant pool placement.
NewWaterList.clear();
DEBUG(dbgs() << "Beginning BR iteration #" << NoBRIters << '\n');
bool BRChange = false;
for (unsigned i = 0, e = ImmBranches.size(); i != e; ++i)
BRChange |= fixupImmediateBr(ImmBranches[i]);
if (BRChange && ++NoBRIters > 30)
report_fatal_error("Branch Fix Up pass failed to converge!");
DEBUG(dumpBBs());
if (!CPChange && !BRChange)
break;
MadeChange = true;
}
DEBUG(dbgs() << '\n'; dumpBBs());
BBInfo.clear();
WaterList.clear();
CPUsers.clear();
CPEntries.clear();
ImmBranches.clear();
return MadeChange;
}
/// doInitialPlacement - Perform the initial placement of the constant pool
/// entries. To start with, we put them all at the end of the function.
void
MipsConstantIslands::doInitialPlacement(std::vector<MachineInstr*> &CPEMIs) {
// Create the basic block to hold the CPE's.
MachineBasicBlock *BB = MF->CreateMachineBasicBlock();
MF->push_back(BB);
// MachineConstantPool measures alignment in bytes. We measure in log2(bytes).
unsigned MaxAlign = Log2_32(MCP->getConstantPoolAlignment());
// Mark the basic block as required by the const-pool.
// If AlignConstantIslands isn't set, use 4-byte alignment for everything.
BB->setAlignment(AlignConstantIslands ? MaxAlign : 2);
// The function needs to be as aligned as the basic blocks. The linker may
// move functions around based on their alignment.
MF->ensureAlignment(BB->getAlignment());
// Order the entries in BB by descending alignment. That ensures correct
// alignment of all entries as long as BB is sufficiently aligned. Keep
// track of the insertion point for each alignment. We are going to bucket
// sort the entries as they are created.
SmallVector<MachineBasicBlock::iterator, 8> InsPoint(MaxAlign + 1, BB->end());
// Add all of the constants from the constant pool to the end block, use an
// identity mapping of CPI's to CPE's.
const std::vector<MachineConstantPoolEntry> &CPs = MCP->getConstants();
const DataLayout &TD = *MF->getTarget().getDataLayout();
for (unsigned i = 0, e = CPs.size(); i != e; ++i) {
unsigned Size = TD.getTypeAllocSize(CPs[i].getType());
assert(Size >= 4 && "Too small constant pool entry");
unsigned Align = CPs[i].getAlignment();
assert(isPowerOf2_32(Align) && "Invalid alignment");
// Verify that all constant pool entries are a multiple of their alignment.
// If not, we would have to pad them out so that instructions stay aligned.
assert((Size % Align) == 0 && "CP Entry not multiple of 4 bytes!");
// Insert CONSTPOOL_ENTRY before entries with a smaller alignment.
unsigned LogAlign = Log2_32(Align);
MachineBasicBlock::iterator InsAt = InsPoint[LogAlign];
MachineInstr *CPEMI =
BuildMI(*BB, InsAt, DebugLoc(), TII->get(Mips::CONSTPOOL_ENTRY))
.addImm(i).addConstantPoolIndex(i).addImm(Size);
CPEMIs.push_back(CPEMI);
// Ensure that future entries with higher alignment get inserted before
// CPEMI. This is bucket sort with iterators.
for (unsigned a = LogAlign + 1; a <= MaxAlign; ++a)
if (InsPoint[a] == InsAt)
InsPoint[a] = CPEMI;
// Add a new CPEntry, but no corresponding CPUser yet.
std::vector<CPEntry> CPEs;
CPEs.push_back(CPEntry(CPEMI, i));
CPEntries.push_back(CPEs);
++NumCPEs;
DEBUG(dbgs() << "Moved CPI#" << i << " to end of function, size = "
<< Size << ", align = " << Align <<'\n');
}
DEBUG(BB->dump());
}
/// BBHasFallthrough - Return true if the specified basic block can fallthrough
/// into the block immediately after it.
static bool BBHasFallthrough(MachineBasicBlock *MBB) {
// Get the next machine basic block in the function.
MachineFunction::iterator MBBI = MBB;
// Can't fall off end of function.
if (std::next(MBBI) == MBB->getParent()->end())
return false;
MachineBasicBlock *NextBB = std::next(MBBI);
for (MachineBasicBlock::succ_iterator I = MBB->succ_begin(),
E = MBB->succ_end(); I != E; ++I)
if (*I == NextBB)
return true;
return false;
}
/// findConstPoolEntry - Given the constpool index and CONSTPOOL_ENTRY MI,
/// look up the corresponding CPEntry.
MipsConstantIslands::CPEntry
*MipsConstantIslands::findConstPoolEntry(unsigned CPI,
const MachineInstr *CPEMI) {
std::vector<CPEntry> &CPEs = CPEntries[CPI];
// Number of entries per constpool index should be small, just do a
// linear search.
for (unsigned i = 0, e = CPEs.size(); i != e; ++i) {
if (CPEs[i].CPEMI == CPEMI)
return &CPEs[i];
}
return nullptr;
}
/// getCPELogAlign - Returns the required alignment of the constant pool entry
/// represented by CPEMI. Alignment is measured in log2(bytes) units.
unsigned MipsConstantIslands::getCPELogAlign(const MachineInstr *CPEMI) {
assert(CPEMI && CPEMI->getOpcode() == Mips::CONSTPOOL_ENTRY);
// Everything is 4-byte aligned unless AlignConstantIslands is set.
if (!AlignConstantIslands)
return 2;
unsigned CPI = CPEMI->getOperand(1).getIndex();
assert(CPI < MCP->getConstants().size() && "Invalid constant pool index.");
unsigned Align = MCP->getConstants()[CPI].getAlignment();
assert(isPowerOf2_32(Align) && "Invalid CPE alignment");
return Log2_32(Align);
}
/// initializeFunctionInfo - Do the initial scan of the function, building up
/// information about the sizes of each block, the location of all the water,
/// and finding all of the constant pool users.
void MipsConstantIslands::
initializeFunctionInfo(const std::vector<MachineInstr*> &CPEMIs) {
BBInfo.clear();
BBInfo.resize(MF->getNumBlockIDs());
// First thing, compute the size of all basic blocks, and see if the function
// has any inline assembly in it. If so, we have to be conservative about
// alignment assumptions, as we don't know for sure the size of any
// instructions in the inline assembly.
for (MachineFunction::iterator I = MF->begin(), E = MF->end(); I != E; ++I)
computeBlockSize(I);
// Compute block offsets.
adjustBBOffsetsAfter(MF->begin());
// Now go back through the instructions and build up our data structures.
for (MachineFunction::iterator MBBI = MF->begin(), E = MF->end();
MBBI != E; ++MBBI) {
MachineBasicBlock &MBB = *MBBI;
// If this block doesn't fall through into the next MBB, then this is
// 'water' that a constant pool island could be placed.
if (!BBHasFallthrough(&MBB))
WaterList.push_back(&MBB);
for (MachineBasicBlock::iterator I = MBB.begin(), E = MBB.end();
I != E; ++I) {
if (I->isDebugValue())
continue;
int Opc = I->getOpcode();
if (I->isBranch()) {
bool isCond = false;
unsigned Bits = 0;
unsigned Scale = 1;
int UOpc = Opc;
switch (Opc) {
default:
continue; // Ignore other branches for now
case Mips::Bimm16:
Bits = 11;
Scale = 2;
isCond = false;
break;
case Mips::BimmX16:
Bits = 16;
Scale = 2;
isCond = false;
break;
case Mips::BeqzRxImm16:
UOpc=Mips::Bimm16;
Bits = 8;
Scale = 2;
isCond = true;
break;
case Mips::BeqzRxImmX16:
UOpc=Mips::Bimm16;
Bits = 16;
Scale = 2;
isCond = true;
break;
case Mips::BnezRxImm16:
UOpc=Mips::Bimm16;
Bits = 8;
Scale = 2;
isCond = true;
break;
case Mips::BnezRxImmX16:
UOpc=Mips::Bimm16;
Bits = 16;
Scale = 2;
isCond = true;
break;
case Mips::Bteqz16:
UOpc=Mips::Bimm16;
Bits = 8;
Scale = 2;
isCond = true;
break;
case Mips::BteqzX16:
UOpc=Mips::Bimm16;
Bits = 16;
Scale = 2;
isCond = true;
break;
case Mips::Btnez16:
UOpc=Mips::Bimm16;
Bits = 8;
Scale = 2;
isCond = true;
break;
case Mips::BtnezX16:
UOpc=Mips::Bimm16;
Bits = 16;
Scale = 2;
isCond = true;
break;
}
// Record this immediate branch.
unsigned MaxOffs = ((1 << (Bits-1))-1) * Scale;
ImmBranches.push_back(ImmBranch(I, MaxOffs, isCond, UOpc));
}
if (Opc == Mips::CONSTPOOL_ENTRY)
continue;
// Scan the instructions for constant pool operands.
for (unsigned op = 0, e = I->getNumOperands(); op != e; ++op)
if (I->getOperand(op).isCPI()) {
// We found one. The addressing mode tells us the max displacement
// from the PC that this instruction permits.
// Basic size info comes from the TSFlags field.
unsigned Bits = 0;
unsigned Scale = 1;
bool NegOk = false;
unsigned LongFormBits = 0;
unsigned LongFormScale = 0;
unsigned LongFormOpcode = 0;
switch (Opc) {
default:
llvm_unreachable("Unknown addressing mode for CP reference!");
case Mips::LwRxPcTcp16:
Bits = 8;
Scale = 4;
LongFormOpcode = Mips::LwRxPcTcpX16;
LongFormBits = 14;
LongFormScale = 1;
break;
case Mips::LwRxPcTcpX16:
Bits = 14;
Scale = 1;
NegOk = true;
break;
}
// Remember that this is a user of a CP entry.
unsigned CPI = I->getOperand(op).getIndex();
MachineInstr *CPEMI = CPEMIs[CPI];
unsigned MaxOffs = ((1 << Bits)-1) * Scale;
unsigned LongFormMaxOffs = ((1 << LongFormBits)-1) * LongFormScale;
CPUsers.push_back(CPUser(I, CPEMI, MaxOffs, NegOk,
LongFormMaxOffs, LongFormOpcode));
// Increment corresponding CPEntry reference count.
CPEntry *CPE = findConstPoolEntry(CPI, CPEMI);
assert(CPE && "Cannot find a corresponding CPEntry!");
CPE->RefCount++;
// Instructions can only use one CP entry, don't bother scanning the
// rest of the operands.
break;
}
}
}
}
/// computeBlockSize - Compute the size and some alignment information for MBB.
/// This function updates BBInfo directly.
void MipsConstantIslands::computeBlockSize(MachineBasicBlock *MBB) {
BasicBlockInfo &BBI = BBInfo[MBB->getNumber()];
BBI.Size = 0;
for (MachineBasicBlock::iterator I = MBB->begin(), E = MBB->end(); I != E;
++I)
BBI.Size += TII->GetInstSizeInBytes(I);
}
/// getOffsetOf - Return the current offset of the specified machine instruction
/// from the start of the function. This offset changes as stuff is moved
/// around inside the function.
unsigned MipsConstantIslands::getOffsetOf(MachineInstr *MI) const {
MachineBasicBlock *MBB = MI->getParent();
// The offset is composed of two things: the sum of the sizes of all MBB's
// before this instruction's block, and the offset from the start of the block
// it is in.
unsigned Offset = BBInfo[MBB->getNumber()].Offset;
// Sum instructions before MI in MBB.
for (MachineBasicBlock::iterator I = MBB->begin(); &*I != MI; ++I) {
assert(I != MBB->end() && "Didn't find MI in its own basic block?");
Offset += TII->GetInstSizeInBytes(I);
}
return Offset;
}
/// CompareMBBNumbers - Little predicate function to sort the WaterList by MBB
/// ID.
static bool CompareMBBNumbers(const MachineBasicBlock *LHS,
const MachineBasicBlock *RHS) {
return LHS->getNumber() < RHS->getNumber();
}
/// updateForInsertedWaterBlock - When a block is newly inserted into the
/// machine function, it upsets all of the block numbers. Renumber the blocks
/// and update the arrays that parallel this numbering.
void MipsConstantIslands::updateForInsertedWaterBlock
(MachineBasicBlock *NewBB) {
// Renumber the MBB's to keep them consecutive.
NewBB->getParent()->RenumberBlocks(NewBB);
// Insert an entry into BBInfo to align it properly with the (newly
// renumbered) block numbers.
BBInfo.insert(BBInfo.begin() + NewBB->getNumber(), BasicBlockInfo());
// Next, update WaterList. Specifically, we need to add NewMBB as having
// available water after it.
water_iterator IP =
std::lower_bound(WaterList.begin(), WaterList.end(), NewBB,
CompareMBBNumbers);
WaterList.insert(IP, NewBB);
}
unsigned MipsConstantIslands::getUserOffset(CPUser &U) const {
return getOffsetOf(U.MI);
}
/// Split the basic block containing MI into two blocks, which are joined by
/// an unconditional branch. Update data structures and renumber blocks to
/// account for this change and returns the newly created block.
MachineBasicBlock *MipsConstantIslands::splitBlockBeforeInstr
(MachineInstr *MI) {
MachineBasicBlock *OrigBB = MI->getParent();
// Create a new MBB for the code after the OrigBB.
MachineBasicBlock *NewBB =
MF->CreateMachineBasicBlock(OrigBB->getBasicBlock());
MachineFunction::iterator MBBI = OrigBB; ++MBBI;
MF->insert(MBBI, NewBB);
// Splice the instructions starting with MI over to NewBB.
NewBB->splice(NewBB->end(), OrigBB, MI, OrigBB->end());
// Add an unconditional branch from OrigBB to NewBB.
// Note the new unconditional branch is not being recorded.
// There doesn't seem to be meaningful DebugInfo available; this doesn't
// correspond to anything in the source.
BuildMI(OrigBB, DebugLoc(), TII->get(Mips::Bimm16)).addMBB(NewBB);
++NumSplit;
// Update the CFG. All succs of OrigBB are now succs of NewBB.
NewBB->transferSuccessors(OrigBB);
// OrigBB branches to NewBB.
OrigBB->addSuccessor(NewBB);
// Update internal data structures to account for the newly inserted MBB.
// This is almost the same as updateForInsertedWaterBlock, except that
// the Water goes after OrigBB, not NewBB.
MF->RenumberBlocks(NewBB);
// Insert an entry into BBInfo to align it properly with the (newly
// renumbered) block numbers.
BBInfo.insert(BBInfo.begin() + NewBB->getNumber(), BasicBlockInfo());
// Next, update WaterList. Specifically, we need to add OrigMBB as having
// available water after it (but not if it's already there, which happens
// when splitting before a conditional branch that is followed by an
// unconditional branch - in that case we want to insert NewBB).
water_iterator IP =
std::lower_bound(WaterList.begin(), WaterList.end(), OrigBB,
CompareMBBNumbers);
MachineBasicBlock* WaterBB = *IP;
if (WaterBB == OrigBB)
WaterList.insert(std::next(IP), NewBB);
else
WaterList.insert(IP, OrigBB);
NewWaterList.insert(OrigBB);
// Figure out how large the OrigBB is. As the first half of the original
// block, it cannot contain a tablejump. The size includes
// the new jump we added. (It should be possible to do this without
// recounting everything, but it's very confusing, and this is rarely
// executed.)
computeBlockSize(OrigBB);
// Figure out how large the NewMBB is. As the second half of the original
// block, it may contain a tablejump.
computeBlockSize(NewBB);
// All BBOffsets following these blocks must be modified.
adjustBBOffsetsAfter(OrigBB);
return NewBB;
}
/// isOffsetInRange - Checks whether UserOffset (the location of a constant pool
/// reference) is within MaxDisp of TrialOffset (a proposed location of a
/// constant pool entry).
bool MipsConstantIslands::isOffsetInRange(unsigned UserOffset,
unsigned TrialOffset, unsigned MaxDisp,
bool NegativeOK) {
if (UserOffset <= TrialOffset) {
// User before the Trial.
if (TrialOffset - UserOffset <= MaxDisp)
return true;
} else if (NegativeOK) {
if (UserOffset - TrialOffset <= MaxDisp)
return true;
}
return false;
}
/// isWaterInRange - Returns true if a CPE placed after the specified
/// Water (a basic block) will be in range for the specific MI.
///
/// Compute how much the function will grow by inserting a CPE after Water.
bool MipsConstantIslands::isWaterInRange(unsigned UserOffset,
MachineBasicBlock* Water, CPUser &U,
unsigned &Growth) {
unsigned CPELogAlign = getCPELogAlign(U.CPEMI);
unsigned CPEOffset = BBInfo[Water->getNumber()].postOffset(CPELogAlign);
unsigned NextBlockOffset, NextBlockAlignment;
MachineFunction::const_iterator NextBlock = Water;
if (++NextBlock == MF->end()) {
NextBlockOffset = BBInfo[Water->getNumber()].postOffset();
NextBlockAlignment = 0;
} else {
NextBlockOffset = BBInfo[NextBlock->getNumber()].Offset;
NextBlockAlignment = NextBlock->getAlignment();
}
unsigned Size = U.CPEMI->getOperand(2).getImm();
unsigned CPEEnd = CPEOffset + Size;
// The CPE may be able to hide in the alignment padding before the next
// block. It may also cause more padding to be required if it is more aligned
// that the next block.
if (CPEEnd > NextBlockOffset) {
Growth = CPEEnd - NextBlockOffset;
// Compute the padding that would go at the end of the CPE to align the next
// block.
Growth += OffsetToAlignment(CPEEnd, 1u << NextBlockAlignment);
// If the CPE is to be inserted before the instruction, that will raise
// the offset of the instruction. Also account for unknown alignment padding
// in blocks between CPE and the user.
if (CPEOffset < UserOffset)
UserOffset += Growth;
} else
// CPE fits in existing padding.
Growth = 0;
return isOffsetInRange(UserOffset, CPEOffset, U);
}
/// isCPEntryInRange - Returns true if the distance between specific MI and
/// specific ConstPool entry instruction can fit in MI's displacement field.
bool MipsConstantIslands::isCPEntryInRange
(MachineInstr *MI, unsigned UserOffset,
MachineInstr *CPEMI, unsigned MaxDisp,
bool NegOk, bool DoDump) {
unsigned CPEOffset = getOffsetOf(CPEMI);
if (DoDump) {
DEBUG({
unsigned Block = MI->getParent()->getNumber();
const BasicBlockInfo &BBI = BBInfo[Block];
dbgs() << "User of CPE#" << CPEMI->getOperand(0).getImm()
<< " max delta=" << MaxDisp
<< format(" insn address=%#x", UserOffset)
<< " in BB#" << Block << ": "
<< format("%#x-%x\t", BBI.Offset, BBI.postOffset()) << *MI
<< format("CPE address=%#x offset=%+d: ", CPEOffset,
int(CPEOffset-UserOffset));
});
}
return isOffsetInRange(UserOffset, CPEOffset, MaxDisp, NegOk);
}
#ifndef NDEBUG
/// BBIsJumpedOver - Return true of the specified basic block's only predecessor
/// unconditionally branches to its only successor.
static bool BBIsJumpedOver(MachineBasicBlock *MBB) {
if (MBB->pred_size() != 1 || MBB->succ_size() != 1)
return false;
MachineBasicBlock *Succ = *MBB->succ_begin();
MachineBasicBlock *Pred = *MBB->pred_begin();
MachineInstr *PredMI = &Pred->back();
if (PredMI->getOpcode() == Mips::Bimm16)
return PredMI->getOperand(0).getMBB() == Succ;
return false;
}
#endif
void MipsConstantIslands::adjustBBOffsetsAfter(MachineBasicBlock *BB) {
unsigned BBNum = BB->getNumber();
for(unsigned i = BBNum + 1, e = MF->getNumBlockIDs(); i < e; ++i) {
// Get the offset and known bits at the end of the layout predecessor.
// Include the alignment of the current block.
unsigned Offset = BBInfo[i - 1].Offset + BBInfo[i - 1].Size;
BBInfo[i].Offset = Offset;
}
}
/// decrementCPEReferenceCount - find the constant pool entry with index CPI
/// and instruction CPEMI, and decrement its refcount. If the refcount
/// becomes 0 remove the entry and instruction. Returns true if we removed
/// the entry, false if we didn't.
bool MipsConstantIslands::decrementCPEReferenceCount(unsigned CPI,
MachineInstr *CPEMI) {
// Find the old entry. Eliminate it if it is no longer used.
CPEntry *CPE = findConstPoolEntry(CPI, CPEMI);
assert(CPE && "Unexpected!");
if (--CPE->RefCount == 0) {
removeDeadCPEMI(CPEMI);
CPE->CPEMI = nullptr;
--NumCPEs;
return true;
}
return false;
}
/// LookForCPEntryInRange - see if the currently referenced CPE is in range;
/// if not, see if an in-range clone of the CPE is in range, and if so,
/// change the data structures so the user references the clone. Returns:
/// 0 = no existing entry found
/// 1 = entry found, and there were no code insertions or deletions
/// 2 = entry found, and there were code insertions or deletions
int MipsConstantIslands::findInRangeCPEntry(CPUser& U, unsigned UserOffset)
{
MachineInstr *UserMI = U.MI;
MachineInstr *CPEMI = U.CPEMI;
// Check to see if the CPE is already in-range.
if (isCPEntryInRange(UserMI, UserOffset, CPEMI, U.getMaxDisp(), U.NegOk,
true)) {
DEBUG(dbgs() << "In range\n");
return 1;
}
// No. Look for previously created clones of the CPE that are in range.
unsigned CPI = CPEMI->getOperand(1).getIndex();
std::vector<CPEntry> &CPEs = CPEntries[CPI];
for (unsigned i = 0, e = CPEs.size(); i != e; ++i) {
// We already tried this one
if (CPEs[i].CPEMI == CPEMI)
continue;
// Removing CPEs can leave empty entries, skip
if (CPEs[i].CPEMI == nullptr)
continue;
if (isCPEntryInRange(UserMI, UserOffset, CPEs[i].CPEMI, U.getMaxDisp(),
U.NegOk)) {
DEBUG(dbgs() << "Replacing CPE#" << CPI << " with CPE#"
<< CPEs[i].CPI << "\n");
// Point the CPUser node to the replacement
U.CPEMI = CPEs[i].CPEMI;
// Change the CPI in the instruction operand to refer to the clone.
for (unsigned j = 0, e = UserMI->getNumOperands(); j != e; ++j)
if (UserMI->getOperand(j).isCPI()) {
UserMI->getOperand(j).setIndex(CPEs[i].CPI);
break;
}
// Adjust the refcount of the clone...
CPEs[i].RefCount++;
// ...and the original. If we didn't remove the old entry, none of the
// addresses changed, so we don't need another pass.
return decrementCPEReferenceCount(CPI, CPEMI) ? 2 : 1;
}
}
return 0;
}
/// LookForCPEntryInRange - see if the currently referenced CPE is in range;
/// This version checks if the longer form of the instruction can be used to
/// to satisfy things.
/// if not, see if an in-range clone of the CPE is in range, and if so,
/// change the data structures so the user references the clone. Returns:
/// 0 = no existing entry found
/// 1 = entry found, and there were no code insertions or deletions
/// 2 = entry found, and there were code insertions or deletions
int MipsConstantIslands::findLongFormInRangeCPEntry
(CPUser& U, unsigned UserOffset)
{
MachineInstr *UserMI = U.MI;
MachineInstr *CPEMI = U.CPEMI;
// Check to see if the CPE is already in-range.
if (isCPEntryInRange(UserMI, UserOffset, CPEMI,
U.getLongFormMaxDisp(), U.NegOk,
true)) {
DEBUG(dbgs() << "In range\n");
UserMI->setDesc(TII->get(U.getLongFormOpcode()));
U.setMaxDisp(U.getLongFormMaxDisp());
return 2; // instruction is longer length now
}
// No. Look for previously created clones of the CPE that are in range.
unsigned CPI = CPEMI->getOperand(1).getIndex();
std::vector<CPEntry> &CPEs = CPEntries[CPI];
for (unsigned i = 0, e = CPEs.size(); i != e; ++i) {
// We already tried this one
if (CPEs[i].CPEMI == CPEMI)
continue;
// Removing CPEs can leave empty entries, skip
if (CPEs[i].CPEMI == nullptr)
continue;
if (isCPEntryInRange(UserMI, UserOffset, CPEs[i].CPEMI,
U.getLongFormMaxDisp(), U.NegOk)) {
DEBUG(dbgs() << "Replacing CPE#" << CPI << " with CPE#"
<< CPEs[i].CPI << "\n");
// Point the CPUser node to the replacement
U.CPEMI = CPEs[i].CPEMI;
// Change the CPI in the instruction operand to refer to the clone.
for (unsigned j = 0, e = UserMI->getNumOperands(); j != e; ++j)
if (UserMI->getOperand(j).isCPI()) {
UserMI->getOperand(j).setIndex(CPEs[i].CPI);
break;
}
// Adjust the refcount of the clone...
CPEs[i].RefCount++;
// ...and the original. If we didn't remove the old entry, none of the
// addresses changed, so we don't need another pass.
return decrementCPEReferenceCount(CPI, CPEMI) ? 2 : 1;
}
}
return 0;
}
/// getUnconditionalBrDisp - Returns the maximum displacement that can fit in
/// the specific unconditional branch instruction.
static inline unsigned getUnconditionalBrDisp(int Opc) {
switch (Opc) {
case Mips::Bimm16:
return ((1<<10)-1)*2;
case Mips::BimmX16:
return ((1<<16)-1)*2;
default:
break;
}
return ((1<<16)-1)*2;
}
/// findAvailableWater - Look for an existing entry in the WaterList in which
/// we can place the CPE referenced from U so it's within range of U's MI.
/// Returns true if found, false if not. If it returns true, WaterIter
/// is set to the WaterList entry.
/// To ensure that this pass
/// terminates, the CPE location for a particular CPUser is only allowed to
/// move to a lower address, so search backward from the end of the list and
/// prefer the first water that is in range.
bool MipsConstantIslands::findAvailableWater(CPUser &U, unsigned UserOffset,
water_iterator &WaterIter) {
if (WaterList.empty())
return false;
unsigned BestGrowth = ~0u;
for (water_iterator IP = std::prev(WaterList.end()), B = WaterList.begin();;
--IP) {
MachineBasicBlock* WaterBB = *IP;
// Check if water is in range and is either at a lower address than the
// current "high water mark" or a new water block that was created since
// the previous iteration by inserting an unconditional branch. In the
// latter case, we want to allow resetting the high water mark back to
// this new water since we haven't seen it before. Inserting branches
// should be relatively uncommon and when it does happen, we want to be
// sure to take advantage of it for all the CPEs near that block, so that
// we don't insert more branches than necessary.
unsigned Growth;
if (isWaterInRange(UserOffset, WaterBB, U, Growth) &&
(WaterBB->getNumber() < U.HighWaterMark->getNumber() ||
NewWaterList.count(WaterBB)) && Growth < BestGrowth) {
// This is the least amount of required padding seen so far.
BestGrowth = Growth;
WaterIter = IP;
DEBUG(dbgs() << "Found water after BB#" << WaterBB->getNumber()
<< " Growth=" << Growth << '\n');
// Keep looking unless it is perfect.
if (BestGrowth == 0)
return true;
}
if (IP == B)
break;
}
return BestGrowth != ~0u;
}
/// createNewWater - No existing WaterList entry will work for
/// CPUsers[CPUserIndex], so create a place to put the CPE. The end of the
/// block is used if in range, and the conditional branch munged so control
/// flow is correct. Otherwise the block is split to create a hole with an
/// unconditional branch around it. In either case NewMBB is set to a
/// block following which the new island can be inserted (the WaterList
/// is not adjusted).
void MipsConstantIslands::createNewWater(unsigned CPUserIndex,
unsigned UserOffset,
MachineBasicBlock *&NewMBB) {
CPUser &U = CPUsers[CPUserIndex];
MachineInstr *UserMI = U.MI;
MachineInstr *CPEMI = U.CPEMI;
unsigned CPELogAlign = getCPELogAlign(CPEMI);
MachineBasicBlock *UserMBB = UserMI->getParent();
const BasicBlockInfo &UserBBI = BBInfo[UserMBB->getNumber()];
// If the block does not end in an unconditional branch already, and if the
// end of the block is within range, make new water there.
if (BBHasFallthrough(UserMBB)) {
// Size of branch to insert.
unsigned Delta = 2;
// Compute the offset where the CPE will begin.
unsigned CPEOffset = UserBBI.postOffset(CPELogAlign) + Delta;
if (isOffsetInRange(UserOffset, CPEOffset, U)) {
DEBUG(dbgs() << "Split at end of BB#" << UserMBB->getNumber()
<< format(", expected CPE offset %#x\n", CPEOffset));
NewMBB = std::next(MachineFunction::iterator(UserMBB));
// Add an unconditional branch from UserMBB to fallthrough block. Record
// it for branch lengthening; this new branch will not get out of range,
// but if the preceding conditional branch is out of range, the targets
// will be exchanged, and the altered branch may be out of range, so the
// machinery has to know about it.
int UncondBr = Mips::Bimm16;
BuildMI(UserMBB, DebugLoc(), TII->get(UncondBr)).addMBB(NewMBB);
unsigned MaxDisp = getUnconditionalBrDisp(UncondBr);
ImmBranches.push_back(ImmBranch(&UserMBB->back(),
MaxDisp, false, UncondBr));
BBInfo[UserMBB->getNumber()].Size += Delta;
adjustBBOffsetsAfter(UserMBB);
return;
}
}
// What a big block. Find a place within the block to split it.
// Try to split the block so it's fully aligned. Compute the latest split
// point where we can add a 4-byte branch instruction, and then align to
// LogAlign which is the largest possible alignment in the function.
unsigned LogAlign = MF->getAlignment();
assert(LogAlign >= CPELogAlign && "Over-aligned constant pool entry");
unsigned BaseInsertOffset = UserOffset + U.getMaxDisp();
DEBUG(dbgs() << format("Split in middle of big block before %#x",
BaseInsertOffset));
// The 4 in the following is for the unconditional branch we'll be inserting
// Alignment of the island is handled
// inside isOffsetInRange.
BaseInsertOffset -= 4;
DEBUG(dbgs() << format(", adjusted to %#x", BaseInsertOffset)
<< " la=" << LogAlign << '\n');
// This could point off the end of the block if we've already got constant
// pool entries following this block; only the last one is in the water list.
// Back past any possible branches (allow for a conditional and a maximally
// long unconditional).
if (BaseInsertOffset + 8 >= UserBBI.postOffset()) {
BaseInsertOffset = UserBBI.postOffset() - 8;
DEBUG(dbgs() << format("Move inside block: %#x\n", BaseInsertOffset));
}
unsigned EndInsertOffset = BaseInsertOffset + 4 +
CPEMI->getOperand(2).getImm();
MachineBasicBlock::iterator MI = UserMI;
++MI;
unsigned CPUIndex = CPUserIndex+1;
unsigned NumCPUsers = CPUsers.size();
//MachineInstr *LastIT = 0;
for (unsigned Offset = UserOffset+TII->GetInstSizeInBytes(UserMI);
Offset < BaseInsertOffset;
Offset += TII->GetInstSizeInBytes(MI), MI = std::next(MI)) {
assert(MI != UserMBB->end() && "Fell off end of block");
if (CPUIndex < NumCPUsers && CPUsers[CPUIndex].MI == MI) {
CPUser &U = CPUsers[CPUIndex];
if (!isOffsetInRange(Offset, EndInsertOffset, U)) {
// Shift intertion point by one unit of alignment so it is within reach.
BaseInsertOffset -= 1u << LogAlign;
EndInsertOffset -= 1u << LogAlign;
}
// This is overly conservative, as we don't account for CPEMIs being
// reused within the block, but it doesn't matter much. Also assume CPEs
// are added in order with alignment padding. We may eventually be able
// to pack the aligned CPEs better.
EndInsertOffset += U.CPEMI->getOperand(2).getImm();
CPUIndex++;
}
}
--MI;
NewMBB = splitBlockBeforeInstr(MI);
}
/// handleConstantPoolUser - Analyze the specified user, checking to see if it
/// is out-of-range. If so, pick up the constant pool value and move it some
/// place in-range. Return true if we changed any addresses (thus must run
/// another pass of branch lengthening), false otherwise.
bool MipsConstantIslands::handleConstantPoolUser(unsigned CPUserIndex) {
CPUser &U = CPUsers[CPUserIndex];
MachineInstr *UserMI = U.MI;
MachineInstr *CPEMI = U.CPEMI;
unsigned CPI = CPEMI->getOperand(1).getIndex();
unsigned Size = CPEMI->getOperand(2).getImm();
// Compute this only once, it's expensive.
unsigned UserOffset = getUserOffset(U);
// See if the current entry is within range, or there is a clone of it
// in range.
int result = findInRangeCPEntry(U, UserOffset);
if (result==1) return false;
else if (result==2) return true;
// Look for water where we can place this CPE.
MachineBasicBlock *NewIsland = MF->CreateMachineBasicBlock();
MachineBasicBlock *NewMBB;
water_iterator IP;
if (findAvailableWater(U, UserOffset, IP)) {
DEBUG(dbgs() << "Found water in range\n");
MachineBasicBlock *WaterBB = *IP;
// If the original WaterList entry was "new water" on this iteration,
// propagate that to the new island. This is just keeping NewWaterList
// updated to match the WaterList, which will be updated below.
if (NewWaterList.erase(WaterBB))
NewWaterList.insert(NewIsland);
// The new CPE goes before the following block (NewMBB).
NewMBB = std::next(MachineFunction::iterator(WaterBB));
} else {
// No water found.
// we first see if a longer form of the instrucion could have reached
// the constant. in that case we won't bother to split
if (!NoLoadRelaxation) {
result = findLongFormInRangeCPEntry(U, UserOffset);
if (result != 0) return true;
}
DEBUG(dbgs() << "No water found\n");
createNewWater(CPUserIndex, UserOffset, NewMBB);
// splitBlockBeforeInstr adds to WaterList, which is important when it is
// called while handling branches so that the water will be seen on the
// next iteration for constant pools, but in this context, we don't want
// it. Check for this so it will be removed from the WaterList.
// Also remove any entry from NewWaterList.
MachineBasicBlock *WaterBB = std::prev(MachineFunction::iterator(NewMBB));
IP = std::find(WaterList.begin(), WaterList.end(), WaterBB);
if (IP != WaterList.end())
NewWaterList.erase(WaterBB);
// We are adding new water. Update NewWaterList.
NewWaterList.insert(NewIsland);
}
// Remove the original WaterList entry; we want subsequent insertions in
// this vicinity to go after the one we're about to insert. This
// considerably reduces the number of times we have to move the same CPE
// more than once and is also important to ensure the algorithm terminates.
if (IP != WaterList.end())
WaterList.erase(IP);
// Okay, we know we can put an island before NewMBB now, do it!
MF->insert(NewMBB, NewIsland);
// Update internal data structures to account for the newly inserted MBB.
updateForInsertedWaterBlock(NewIsland);
// Decrement the old entry, and remove it if refcount becomes 0.
decrementCPEReferenceCount(CPI, CPEMI);
// No existing clone of this CPE is within range.
// We will be generating a new clone. Get a UID for it.
unsigned ID = createPICLabelUId();
// Now that we have an island to add the CPE to, clone the original CPE and
// add it to the island.
U.HighWaterMark = NewIsland;
U.CPEMI = BuildMI(NewIsland, DebugLoc(), TII->get(Mips::CONSTPOOL_ENTRY))
.addImm(ID).addConstantPoolIndex(CPI).addImm(Size);
CPEntries[CPI].push_back(CPEntry(U.CPEMI, ID, 1));
++NumCPEs;
// Mark the basic block as aligned as required by the const-pool entry.
NewIsland->setAlignment(getCPELogAlign(U.CPEMI));
// Increase the size of the island block to account for the new entry.
BBInfo[NewIsland->getNumber()].Size += Size;
adjustBBOffsetsAfter(std::prev(MachineFunction::iterator(NewIsland)));
// Finally, change the CPI in the instruction operand to be ID.
for (unsigned i = 0, e = UserMI->getNumOperands(); i != e; ++i)
if (UserMI->getOperand(i).isCPI()) {
UserMI->getOperand(i).setIndex(ID);
break;
}
DEBUG(dbgs() << " Moved CPE to #" << ID << " CPI=" << CPI
<< format(" offset=%#x\n", BBInfo[NewIsland->getNumber()].Offset));
return true;
}
/// removeDeadCPEMI - Remove a dead constant pool entry instruction. Update
/// sizes and offsets of impacted basic blocks.
void MipsConstantIslands::removeDeadCPEMI(MachineInstr *CPEMI) {
MachineBasicBlock *CPEBB = CPEMI->getParent();
unsigned Size = CPEMI->getOperand(2).getImm();
CPEMI->eraseFromParent();
BBInfo[CPEBB->getNumber()].Size -= Size;
// All succeeding offsets have the current size value added in, fix this.
if (CPEBB->empty()) {
BBInfo[CPEBB->getNumber()].Size = 0;
// This block no longer needs to be aligned.
CPEBB->setAlignment(0);
} else
// Entries are sorted by descending alignment, so realign from the front.
CPEBB->setAlignment(getCPELogAlign(CPEBB->begin()));
adjustBBOffsetsAfter(CPEBB);
// An island has only one predecessor BB and one successor BB. Check if
// this BB's predecessor jumps directly to this BB's successor. This
// shouldn't happen currently.
assert(!BBIsJumpedOver(CPEBB) && "How did this happen?");
// FIXME: remove the empty blocks after all the work is done?
}
/// removeUnusedCPEntries - Remove constant pool entries whose refcounts
/// are zero.
bool MipsConstantIslands::removeUnusedCPEntries() {
unsigned MadeChange = false;
for (unsigned i = 0, e = CPEntries.size(); i != e; ++i) {
std::vector<CPEntry> &CPEs = CPEntries[i];
for (unsigned j = 0, ee = CPEs.size(); j != ee; ++j) {
if (CPEs[j].RefCount == 0 && CPEs[j].CPEMI) {
removeDeadCPEMI(CPEs[j].CPEMI);
CPEs[j].CPEMI = nullptr;
MadeChange = true;
}
}
}
return MadeChange;
}
/// isBBInRange - Returns true if the distance between specific MI and
/// specific BB can fit in MI's displacement field.
bool MipsConstantIslands::isBBInRange
(MachineInstr *MI,MachineBasicBlock *DestBB, unsigned MaxDisp) {
unsigned PCAdj = 4;
unsigned BrOffset = getOffsetOf(MI) + PCAdj;
unsigned DestOffset = BBInfo[DestBB->getNumber()].Offset;
DEBUG(dbgs() << "Branch of destination BB#" << DestBB->getNumber()
<< " from BB#" << MI->getParent()->getNumber()
<< " max delta=" << MaxDisp
<< " from " << getOffsetOf(MI) << " to " << DestOffset
<< " offset " << int(DestOffset-BrOffset) << "\t" << *MI);
if (BrOffset <= DestOffset) {
// Branch before the Dest.
if (DestOffset-BrOffset <= MaxDisp)
return true;
} else {
if (BrOffset-DestOffset <= MaxDisp)
return true;
}
return false;
}
/// fixupImmediateBr - Fix up an immediate branch whose destination is too far
/// away to fit in its displacement field.
bool MipsConstantIslands::fixupImmediateBr(ImmBranch &Br) {
MachineInstr *MI = Br.MI;
unsigned TargetOperand = branchTargetOperand(MI);
MachineBasicBlock *DestBB = MI->getOperand(TargetOperand).getMBB();
// Check to see if the DestBB is already in-range.
if (isBBInRange(MI, DestBB, Br.MaxDisp))
return false;
if (!Br.isCond)
return fixupUnconditionalBr(Br);
return fixupConditionalBr(Br);
}
/// fixupUnconditionalBr - Fix up an unconditional branch whose destination is
/// too far away to fit in its displacement field. If the LR register has been
/// spilled in the epilogue, then we can use BL to implement a far jump.
/// Otherwise, add an intermediate branch instruction to a branch.
bool
MipsConstantIslands::fixupUnconditionalBr(ImmBranch &Br) {
MachineInstr *MI = Br.MI;
MachineBasicBlock *MBB = MI->getParent();
MachineBasicBlock *DestBB = MI->getOperand(0).getMBB();
// Use BL to implement far jump.
unsigned BimmX16MaxDisp = ((1 << 16)-1) * 2;
if (isBBInRange(MI, DestBB, BimmX16MaxDisp)) {
Br.MaxDisp = BimmX16MaxDisp;
MI->setDesc(TII->get(Mips::BimmX16));
}
else {
// need to give the math a more careful look here
// this is really a segment address and not
// a PC relative address. FIXME. But I think that
// just reducing the bits by 1 as I've done is correct.
// The basic block we are branching too much be longword aligned.
// we know that RA is saved because we always save it right now.
// this requirement will be relaxed later but we also have an alternate
// way to implement this that I will implement that does not need jal.
// We should have a way to back out this alignment restriction if we "can" later.
// but it is not harmful.
//
DestBB->setAlignment(2);
Br.MaxDisp = ((1<<24)-1) * 2;
MI->setDesc(TII->get(Mips::JalB16));
}
BBInfo[MBB->getNumber()].Size += 2;
adjustBBOffsetsAfter(MBB);
HasFarJump = true;
++NumUBrFixed;
DEBUG(dbgs() << " Changed B to long jump " << *MI);
return true;
}
/// fixupConditionalBr - Fix up a conditional branch whose destination is too
/// far away to fit in its displacement field. It is converted to an inverse
/// conditional branch + an unconditional branch to the destination.
bool
MipsConstantIslands::fixupConditionalBr(ImmBranch &Br) {
MachineInstr *MI = Br.MI;
unsigned TargetOperand = branchTargetOperand(MI);
MachineBasicBlock *DestBB = MI->getOperand(TargetOperand).getMBB();
unsigned Opcode = MI->getOpcode();
unsigned LongFormOpcode = longformBranchOpcode(Opcode);
unsigned LongFormMaxOff = branchMaxOffsets(LongFormOpcode);
// Check to see if the DestBB is already in-range.
if (isBBInRange(MI, DestBB, LongFormMaxOff)) {
Br.MaxDisp = LongFormMaxOff;
MI->setDesc(TII->get(LongFormOpcode));
return true;
}
// Add an unconditional branch to the destination and invert the branch
// condition to jump over it:
// bteqz L1
// =>
// bnez L2
// b L1
// L2:
// If the branch is at the end of its MBB and that has a fall-through block,
// direct the updated conditional branch to the fall-through block. Otherwise,
// split the MBB before the next instruction.
MachineBasicBlock *MBB = MI->getParent();
MachineInstr *BMI = &MBB->back();
bool NeedSplit = (BMI != MI) || !BBHasFallthrough(MBB);
unsigned OppositeBranchOpcode = TII->getOppositeBranchOpc(Opcode);
++NumCBrFixed;
if (BMI != MI) {
if (std::next(MachineBasicBlock::iterator(MI)) == std::prev(MBB->end()) &&
isUnconditionalBranch(BMI->getOpcode())) {
// Last MI in the BB is an unconditional branch. Can we simply invert the
// condition and swap destinations:
// beqz L1
// b L2
// =>
// bnez L2
// b L1
unsigned BMITargetOperand = branchTargetOperand(BMI);
MachineBasicBlock *NewDest =
BMI->getOperand(BMITargetOperand).getMBB();
if (isBBInRange(MI, NewDest, Br.MaxDisp)) {
DEBUG(dbgs() << " Invert Bcc condition and swap its destination with "
<< *BMI);
MI->setDesc(TII->get(OppositeBranchOpcode));
BMI->getOperand(BMITargetOperand).setMBB(DestBB);
MI->getOperand(TargetOperand).setMBB(NewDest);
return true;
}
}
}
if (NeedSplit) {
splitBlockBeforeInstr(MI);
// No need for the branch to the next block. We're adding an unconditional
// branch to the destination.
int delta = TII->GetInstSizeInBytes(&MBB->back());
BBInfo[MBB->getNumber()].Size -= delta;
MBB->back().eraseFromParent();
// BBInfo[SplitBB].Offset is wrong temporarily, fixed below
}
MachineBasicBlock *NextBB = std::next(MachineFunction::iterator(MBB));
DEBUG(dbgs() << " Insert B to BB#" << DestBB->getNumber()
<< " also invert condition and change dest. to BB#"
<< NextBB->getNumber() << "\n");
// Insert a new conditional branch and a new unconditional branch.
// Also update the ImmBranch as well as adding a new entry for the new branch.
if (MI->getNumExplicitOperands() == 2) {
BuildMI(MBB, DebugLoc(), TII->get(OppositeBranchOpcode))
.addReg(MI->getOperand(0).getReg())
.addMBB(NextBB);
} else {
BuildMI(MBB, DebugLoc(), TII->get(OppositeBranchOpcode))
.addMBB(NextBB);
}
Br.MI = &MBB->back();
BBInfo[MBB->getNumber()].Size += TII->GetInstSizeInBytes(&MBB->back());
BuildMI(MBB, DebugLoc(), TII->get(Br.UncondBr)).addMBB(DestBB);
BBInfo[MBB->getNumber()].Size += TII->GetInstSizeInBytes(&MBB->back());
unsigned MaxDisp = getUnconditionalBrDisp(Br.UncondBr);
ImmBranches.push_back(ImmBranch(&MBB->back(), MaxDisp, false, Br.UncondBr));
// Remove the old conditional branch. It may or may not still be in MBB.
BBInfo[MI->getParent()->getNumber()].Size -= TII->GetInstSizeInBytes(MI);
MI->eraseFromParent();
adjustBBOffsetsAfter(MBB);
return true;
}
void MipsConstantIslands::prescanForConstants() {
unsigned J = 0;
(void)J;
for (MachineFunction::iterator B =
MF->begin(), E = MF->end(); B != E; ++B) {
for (MachineBasicBlock::instr_iterator I =
B->instr_begin(), EB = B->instr_end(); I != EB; ++I) {
switch(I->getDesc().getOpcode()) {
case Mips::LwConstant32: {
PrescannedForConstants = true;
DEBUG(dbgs() << "constant island constant " << *I << "\n");
J = I->getNumOperands();
DEBUG(dbgs() << "num operands " << J << "\n");
MachineOperand& Literal = I->getOperand(1);
if (Literal.isImm()) {
int64_t V = Literal.getImm();
DEBUG(dbgs() << "literal " << V << "\n");
Type *Int32Ty =
Type::getInt32Ty(MF->getFunction()->getContext());
const Constant *C = ConstantInt::get(Int32Ty, V);
unsigned index = MCP->getConstantPoolIndex(C, 4);
I->getOperand(2).ChangeToImmediate(index);
DEBUG(dbgs() << "constant island constant " << *I << "\n");
I->setDesc(TII->get(Mips::LwRxPcTcp16));
I->RemoveOperand(1);
I->RemoveOperand(1);
I->addOperand(MachineOperand::CreateCPI(index, 0));
I->addOperand(MachineOperand::CreateImm(4));
}
break;
}
default:
break;
}
}
}
}