/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ANDROID_GRALLOC_INTERFACE_H
#define ANDROID_GRALLOC_INTERFACE_H
#include <system/window.h>
#include <system/graphics.h>
#include <hardware/hardware.h>
#include <stdint.h>
#include <sys/cdefs.h>
#include <sys/types.h>
#include <cutils/native_handle.h>
#include <hardware/hardware.h>
#include <hardware/fb.h>
__BEGIN_DECLS
/**
* Module versioning information for the Gralloc hardware module, based on
* gralloc_module_t.common.module_api_version.
*
* Version History:
*
* GRALLOC_MODULE_API_VERSION_0_1:
* Initial Gralloc hardware module API.
*
* GRALLOC_MODULE_API_VERSION_0_2:
* Add support for flexible YCbCr format with (*lock_ycbcr)() method.
*/
#define GRALLOC_MODULE_API_VERSION_0_1 HARDWARE_MODULE_API_VERSION(0, 1)
#define GRALLOC_MODULE_API_VERSION_0_2 HARDWARE_MODULE_API_VERSION(0, 2)
#define GRALLOC_DEVICE_API_VERSION_0_1 HARDWARE_DEVICE_API_VERSION(0, 1)
/**
* The id of this module
*/
#define GRALLOC_HARDWARE_MODULE_ID "gralloc"
/**
* Name of the graphics device to open
*/
#define GRALLOC_HARDWARE_GPU0 "gpu0"
enum {
/* buffer is never read in software */
GRALLOC_USAGE_SW_READ_NEVER = 0x00000000,
/* buffer is rarely read in software */
GRALLOC_USAGE_SW_READ_RARELY = 0x00000002,
/* buffer is often read in software */
GRALLOC_USAGE_SW_READ_OFTEN = 0x00000003,
/* mask for the software read values */
GRALLOC_USAGE_SW_READ_MASK = 0x0000000F,
/* buffer is never written in software */
GRALLOC_USAGE_SW_WRITE_NEVER = 0x00000000,
/* buffer is rarely written in software */
GRALLOC_USAGE_SW_WRITE_RARELY = 0x00000020,
/* buffer is often written in software */
GRALLOC_USAGE_SW_WRITE_OFTEN = 0x00000030,
/* mask for the software write values */
GRALLOC_USAGE_SW_WRITE_MASK = 0x000000F0,
/* buffer will be used as an OpenGL ES texture */
GRALLOC_USAGE_HW_TEXTURE = 0x00000100,
/* buffer will be used as an OpenGL ES render target */
GRALLOC_USAGE_HW_RENDER = 0x00000200,
/* buffer will be used by the 2D hardware blitter */
GRALLOC_USAGE_HW_2D = 0x00000400,
/* buffer will be used by the HWComposer HAL module */
GRALLOC_USAGE_HW_COMPOSER = 0x00000800,
/* buffer will be used with the framebuffer device */
GRALLOC_USAGE_HW_FB = 0x00001000,
/* buffer will be used with the HW video encoder */
GRALLOC_USAGE_HW_VIDEO_ENCODER = 0x00010000,
/* buffer will be written by the HW camera pipeline */
GRALLOC_USAGE_HW_CAMERA_WRITE = 0x00020000,
/* buffer will be read by the HW camera pipeline */
GRALLOC_USAGE_HW_CAMERA_READ = 0x00040000,
/* buffer will be used as part of zero-shutter-lag queue */
GRALLOC_USAGE_HW_CAMERA_ZSL = 0x00060000,
/* mask for the camera access values */
GRALLOC_USAGE_HW_CAMERA_MASK = 0x00060000,
/* mask for the software usage bit-mask */
GRALLOC_USAGE_HW_MASK = 0x00071F00,
/* buffer will be used as a RenderScript Allocation */
GRALLOC_USAGE_RENDERSCRIPT = 0x00100000,
/* buffer should be displayed full-screen on an external display when
* possible
*/
GRALLOC_USAGE_EXTERNAL_DISP = 0x00002000,
/* Must have a hardware-protected path to external display sink for
* this buffer. If a hardware-protected path is not available, then
* either don't composite only this buffer (preferred) to the
* external sink, or (less desirable) do not route the entire
* composition to the external sink.
*/
GRALLOC_USAGE_PROTECTED = 0x00004000,
/* implementation-specific private usage flags */
GRALLOC_USAGE_PRIVATE_0 = 0x10000000,
GRALLOC_USAGE_PRIVATE_1 = 0x20000000,
GRALLOC_USAGE_PRIVATE_2 = 0x40000000,
GRALLOC_USAGE_PRIVATE_3 = 0x80000000,
GRALLOC_USAGE_PRIVATE_MASK = 0xF0000000,
};
/*****************************************************************************/
/**
* Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
* and the fields of this data structure must begin with hw_module_t
* followed by module specific information.
*/
typedef struct gralloc_module_t {
struct hw_module_t common;
/*
* (*registerBuffer)() must be called before a buffer_handle_t that has not
* been created with (*alloc_device_t::alloc)() can be used.
*
* This is intended to be used with buffer_handle_t's that have been
* received in this process through IPC.
*
* This function checks that the handle is indeed a valid one and prepares
* it for use with (*lock)() and (*unlock)().
*
* It is not necessary to call (*registerBuffer)() on a handle created
* with (*alloc_device_t::alloc)().
*
* returns an error if this buffer_handle_t is not valid.
*/
int (*registerBuffer)(struct gralloc_module_t const* module,
buffer_handle_t handle);
/*
* (*unregisterBuffer)() is called once this handle is no longer needed in
* this process. After this call, it is an error to call (*lock)(),
* (*unlock)(), or (*registerBuffer)().
*
* This function doesn't close or free the handle itself; this is done
* by other means, usually through libcutils's native_handle_close() and
* native_handle_free().
*
* It is an error to call (*unregisterBuffer)() on a buffer that wasn't
* explicitly registered first.
*/
int (*unregisterBuffer)(struct gralloc_module_t const* module,
buffer_handle_t handle);
/*
* The (*lock)() method is called before a buffer is accessed for the
* specified usage. This call may block, for instance if the h/w needs
* to finish rendering or if CPU caches need to be synchronized.
*
* The caller promises to modify only pixels in the area specified
* by (l,t,w,h).
*
* The content of the buffer outside of the specified area is NOT modified
* by this call.
*
* If usage specifies GRALLOC_USAGE_SW_*, vaddr is filled with the address
* of the buffer in virtual memory.
*
* Note calling (*lock)() on HAL_PIXEL_FORMAT_YCbCr_*_888 buffers will fail
* and return -EINVAL. These buffers must be locked with (*lock_ycbcr)()
* instead.
*
* THREADING CONSIDERATIONS:
*
* It is legal for several different threads to lock a buffer from
* read access, none of the threads are blocked.
*
* However, locking a buffer simultaneously for write or read/write is
* undefined, but:
* - shall not result in termination of the process
* - shall not block the caller
* It is acceptable to return an error or to leave the buffer's content
* into an indeterminate state.
*
* If the buffer was created with a usage mask incompatible with the
* requested usage flags here, -EINVAL is returned.
*
*/
int (*lock)(struct gralloc_module_t const* module,
buffer_handle_t handle, int usage,
int l, int t, int w, int h,
void** vaddr);
/*
* The (*unlock)() method must be called after all changes to the buffer
* are completed.
*/
int (*unlock)(struct gralloc_module_t const* module,
buffer_handle_t handle);
/* reserved for future use */
int (*perform)(struct gralloc_module_t const* module,
int operation, ... );
/*
* The (*lock_ycbcr)() method is like the (*lock)() method, with the
* difference that it fills a struct ycbcr with a description of the buffer
* layout, and zeroes out the reserved fields.
*
* This will only work on buffers with HAL_PIXEL_FORMAT_YCbCr_*_888, and
* will return -EINVAL on any other buffer formats.
*
* Added in GRALLOC_MODULE_API_VERSION_0_2.
*/
int (*lock_ycbcr)(struct gralloc_module_t const* module,
buffer_handle_t handle, int usage,
int l, int t, int w, int h,
struct android_ycbcr *ycbcr);
/* reserved for future use */
void* reserved_proc[6];
} gralloc_module_t;
/*****************************************************************************/
/**
* Every device data structure must begin with hw_device_t
* followed by module specific public methods and attributes.
*/
typedef struct alloc_device_t {
struct hw_device_t common;
/*
* (*alloc)() Allocates a buffer in graphic memory with the requested
* parameters and returns a buffer_handle_t and the stride in pixels to
* allow the implementation to satisfy hardware constraints on the width
* of a pixmap (eg: it may have to be multiple of 8 pixels).
* The CALLER TAKES OWNERSHIP of the buffer_handle_t.
*
* If format is HAL_PIXEL_FORMAT_YCbCr_420_888, the returned stride must be
* 0, since the actual strides are available from the android_ycbcr
* structure.
*
* Returns 0 on success or -errno on error.
*/
int (*alloc)(struct alloc_device_t* dev,
int w, int h, int format, int usage,
buffer_handle_t* handle, int* stride);
/*
* (*free)() Frees a previously allocated buffer.
* Behavior is undefined if the buffer is still mapped in any process,
* but shall not result in termination of the program or security breaches
* (allowing a process to get access to another process' buffers).
* THIS FUNCTION TAKES OWNERSHIP of the buffer_handle_t which becomes
* invalid after the call.
*
* Returns 0 on success or -errno on error.
*/
int (*free)(struct alloc_device_t* dev,
buffer_handle_t handle);
/* This hook is OPTIONAL.
*
* If non NULL it will be caused by SurfaceFlinger on dumpsys
*/
void (*dump)(struct alloc_device_t *dev, char *buff, int buff_len);
void* reserved_proc[7];
} alloc_device_t;
/** convenience API for opening and closing a supported device */
static inline int gralloc_open(const struct hw_module_t* module,
struct alloc_device_t** device) {
return module->methods->open(module,
GRALLOC_HARDWARE_GPU0, (struct hw_device_t**)device);
}
static inline int gralloc_close(struct alloc_device_t* device) {
return device->common.close(&device->common);
}
__END_DECLS
#endif // ANDROID_GRALLOC_INTERFACE_H