/*
----------------------------------------------------------------
Notice that the above BSD-style license applies to this one file
(helgrind.h) only. The entire rest of Valgrind is licensed under
the terms of the GNU General Public License, version 2. See the
COPYING file in the source distribution for details.
----------------------------------------------------------------
This file is part of Helgrind, a Valgrind tool for detecting errors
in threaded programs.
Copyright (C) 2007-2012 OpenWorks LLP
info@open-works.co.uk
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
----------------------------------------------------------------
Notice that the above BSD-style license applies to this one file
(helgrind.h) only. The entire rest of Valgrind is licensed under
the terms of the GNU General Public License, version 2. See the
COPYING file in the source distribution for details.
----------------------------------------------------------------
*/
#ifndef __HELGRIND_H
#define __HELGRIND_H
#include "valgrind.h"
/* !! ABIWARNING !! ABIWARNING !! ABIWARNING !! ABIWARNING !!
This enum comprises an ABI exported by Valgrind to programs
which use client requests. DO NOT CHANGE THE ORDER OF THESE
ENTRIES, NOR DELETE ANY -- add new ones at the end. */
typedef
enum {
VG_USERREQ__HG_CLEAN_MEMORY = VG_USERREQ_TOOL_BASE('H','G'),
/* The rest are for Helgrind's internal use. Not for end-user
use. Do not use them unless you are a Valgrind developer. */
/* Notify the tool what this thread's pthread_t is. */
_VG_USERREQ__HG_SET_MY_PTHREAD_T = VG_USERREQ_TOOL_BASE('H','G')
+ 256,
_VG_USERREQ__HG_PTH_API_ERROR, /* char*, int */
_VG_USERREQ__HG_PTHREAD_JOIN_POST, /* pthread_t of quitter */
_VG_USERREQ__HG_PTHREAD_MUTEX_INIT_POST, /* pth_mx_t*, long mbRec */
_VG_USERREQ__HG_PTHREAD_MUTEX_DESTROY_PRE, /* pth_mx_t* */
_VG_USERREQ__HG_PTHREAD_MUTEX_UNLOCK_PRE, /* pth_mx_t* */
_VG_USERREQ__HG_PTHREAD_MUTEX_UNLOCK_POST, /* pth_mx_t* */
_VG_USERREQ__HG_PTHREAD_MUTEX_LOCK_PRE, /* pth_mx_t*, long isTryLock */
_VG_USERREQ__HG_PTHREAD_MUTEX_LOCK_POST, /* pth_mx_t* */
_VG_USERREQ__HG_PTHREAD_COND_SIGNAL_PRE, /* pth_cond_t* */
_VG_USERREQ__HG_PTHREAD_COND_BROADCAST_PRE, /* pth_cond_t* */
_VG_USERREQ__HG_PTHREAD_COND_WAIT_PRE, /* pth_cond_t*, pth_mx_t* */
_VG_USERREQ__HG_PTHREAD_COND_WAIT_POST, /* pth_cond_t*, pth_mx_t* */
_VG_USERREQ__HG_PTHREAD_COND_DESTROY_PRE, /* pth_cond_t* */
_VG_USERREQ__HG_PTHREAD_RWLOCK_INIT_POST, /* pth_rwlk_t* */
_VG_USERREQ__HG_PTHREAD_RWLOCK_DESTROY_PRE, /* pth_rwlk_t* */
_VG_USERREQ__HG_PTHREAD_RWLOCK_LOCK_PRE, /* pth_rwlk_t*, long isW */
_VG_USERREQ__HG_PTHREAD_RWLOCK_LOCK_POST, /* pth_rwlk_t*, long isW */
_VG_USERREQ__HG_PTHREAD_RWLOCK_UNLOCK_PRE, /* pth_rwlk_t* */
_VG_USERREQ__HG_PTHREAD_RWLOCK_UNLOCK_POST, /* pth_rwlk_t* */
_VG_USERREQ__HG_POSIX_SEM_INIT_POST, /* sem_t*, ulong value */
_VG_USERREQ__HG_POSIX_SEM_DESTROY_PRE, /* sem_t* */
_VG_USERREQ__HG_POSIX_SEM_POST_PRE, /* sem_t* */
_VG_USERREQ__HG_POSIX_SEM_WAIT_POST, /* sem_t* */
_VG_USERREQ__HG_PTHREAD_BARRIER_INIT_PRE, /* pth_bar_t*, ulong, ulong */
_VG_USERREQ__HG_PTHREAD_BARRIER_WAIT_PRE, /* pth_bar_t* */
_VG_USERREQ__HG_PTHREAD_BARRIER_DESTROY_PRE, /* pth_bar_t* */
_VG_USERREQ__HG_PTHREAD_SPIN_INIT_OR_UNLOCK_PRE, /* pth_slk_t* */
_VG_USERREQ__HG_PTHREAD_SPIN_INIT_OR_UNLOCK_POST, /* pth_slk_t* */
_VG_USERREQ__HG_PTHREAD_SPIN_LOCK_PRE, /* pth_slk_t* */
_VG_USERREQ__HG_PTHREAD_SPIN_LOCK_POST, /* pth_slk_t* */
_VG_USERREQ__HG_PTHREAD_SPIN_DESTROY_PRE, /* pth_slk_t* */
_VG_USERREQ__HG_CLIENTREQ_UNIMP, /* char* */
_VG_USERREQ__HG_USERSO_SEND_PRE, /* arbitrary UWord SO-tag */
_VG_USERREQ__HG_USERSO_RECV_POST, /* arbitrary UWord SO-tag */
_VG_USERREQ__HG_USERSO_FORGET_ALL, /* arbitrary UWord SO-tag */
_VG_USERREQ__HG_RESERVED2, /* Do not use */
_VG_USERREQ__HG_RESERVED3, /* Do not use */
_VG_USERREQ__HG_RESERVED4, /* Do not use */
_VG_USERREQ__HG_ARANGE_MAKE_UNTRACKED, /* Addr a, ulong len */
_VG_USERREQ__HG_ARANGE_MAKE_TRACKED, /* Addr a, ulong len */
_VG_USERREQ__HG_PTHREAD_BARRIER_RESIZE_PRE, /* pth_bar_t*, ulong */
_VG_USERREQ__HG_CLEAN_MEMORY_HEAPBLOCK /* Addr start_of_block */
} Vg_TCheckClientRequest;
/*----------------------------------------------------------------*/
/*--- ---*/
/*--- Implementation-only facilities. Not for end-user use. ---*/
/*--- For end-user facilities see below (the next section in ---*/
/*--- this file.) ---*/
/*--- ---*/
/*----------------------------------------------------------------*/
/* Do a client request. These are macros rather than a functions so
as to avoid having an extra frame in stack traces.
NB: these duplicate definitions in hg_intercepts.c. But here, we
have to make do with weaker typing (no definition of Word etc) and
no assertions, whereas in helgrind.h we can use those facilities.
Obviously it's important the two sets of definitions are kept in
sync.
The commented-out asserts should actually hold, but unfortunately
they can't be allowed to be visible here, because that would
require the end-user code to #include <assert.h>.
*/
#define DO_CREQ_v_W(_creqF, _ty1F,_arg1F) \
do { \
long int _arg1; \
/* assert(sizeof(_ty1F) == sizeof(long int)); */ \
_arg1 = (long int)(_arg1F); \
VALGRIND_DO_CLIENT_REQUEST_STMT( \
(_creqF), \
_arg1, 0,0,0,0); \
} while (0)
#define DO_CREQ_W_W(_resF, _dfltF, _creqF, _ty1F,_arg1F) \
do { \
long int arg1; \
/* assert(sizeof(_ty1F) == sizeof(long int)); */ \
_arg1 = (long int)(_arg1F); \
_qzz_res = VALGRIND_DO_CLIENT_REQUEST_EXPR( \
(_dfltF), \
(_creqF), \
_arg1, 0,0,0,0); \
_resF = _qzz_res; \
} while (0)
#define DO_CREQ_v_WW(_creqF, _ty1F,_arg1F, _ty2F,_arg2F) \
do { \
long int _arg1, _arg2; \
/* assert(sizeof(_ty1F) == sizeof(long int)); */ \
/* assert(sizeof(_ty2F) == sizeof(long int)); */ \
_arg1 = (long int)(_arg1F); \
_arg2 = (long int)(_arg2F); \
VALGRIND_DO_CLIENT_REQUEST_STMT( \
(_creqF), \
_arg1,_arg2,0,0,0); \
} while (0)
#define DO_CREQ_v_WWW(_creqF, _ty1F,_arg1F, \
_ty2F,_arg2F, _ty3F, _arg3F) \
do { \
long int _arg1, _arg2, _arg3; \
/* assert(sizeof(_ty1F) == sizeof(long int)); */ \
/* assert(sizeof(_ty2F) == sizeof(long int)); */ \
/* assert(sizeof(_ty3F) == sizeof(long int)); */ \
_arg1 = (long int)(_arg1F); \
_arg2 = (long int)(_arg2F); \
_arg3 = (long int)(_arg3F); \
VALGRIND_DO_CLIENT_REQUEST_STMT( \
(_creqF), \
_arg1,_arg2,_arg3,0,0); \
} while (0)
#define _HG_CLIENTREQ_UNIMP(_qzz_str) \
DO_CREQ_v_W(_VG_USERREQ__HG_CLIENTREQ_UNIMP, \
(char*),(_qzz_str))
/*----------------------------------------------------------------*/
/*--- ---*/
/*--- Helgrind-native requests. These allow access to ---*/
/*--- the same set of annotation primitives that are used ---*/
/*--- to build the POSIX pthread wrappers. ---*/
/*--- ---*/
/*----------------------------------------------------------------*/
/* ----------------------------------------------------------
For describing ordinary mutexes (non-rwlocks). For rwlock
descriptions see ANNOTATE_RWLOCK_* below.
---------------------------------------------------------- */
/* Notify here immediately after mutex creation. _mbRec == 0 for a
non-recursive mutex, 1 for a recursive mutex. */
#define VALGRIND_HG_MUTEX_INIT_POST(_mutex, _mbRec) \
DO_CREQ_v_WW(_VG_USERREQ__HG_PTHREAD_MUTEX_INIT_POST, \
void*,(_mutex), long,(_mbRec))
/* Notify here immediately before mutex acquisition. _isTryLock == 0
for a normal acquisition, 1 for a "try" style acquisition. */
#define VALGRIND_HG_MUTEX_LOCK_PRE(_mutex, _isTryLock) \
DO_CREQ_v_WW(_VG_USERREQ__HG_PTHREAD_MUTEX_LOCK_PRE, \
void*,(_mutex), long,(_isTryLock))
/* Notify here immediately after a successful mutex acquisition. */
#define VALGRIND_HG_MUTEX_LOCK_POST(_mutex) \
DO_CREQ_v_W(_VG_USERREQ__HG_PTHREAD_MUTEX_LOCK_POST, \
void*,(_mutex))
/* Notify here immediately before a mutex release. */
#define VALGRIND_HG_MUTEX_UNLOCK_PRE(_mutex) \
DO_CREQ_v_W(_VG_USERREQ__HG_PTHREAD_MUTEX_UNLOCK_PRE, \
void*,(_mutex))
/* Notify here immediately after a mutex release. */
#define VALGRIND_HG_MUTEX_UNLOCK_POST(_mutex) \
DO_CREQ_v_W(_VG_USERREQ__HG_PTHREAD_MUTEX_UNLOCK_POST, \
void*,(_mutex))
/* Notify here immediately before mutex destruction. */
#define VALGRIND_HG_MUTEX_DESTROY_PRE(_mutex) \
DO_CREQ_v_W(_VG_USERREQ__HG_PTHREAD_MUTEX_DESTROY_PRE, \
void*,(_mutex))
/* ----------------------------------------------------------
For describing semaphores.
---------------------------------------------------------- */
/* Notify here immediately after semaphore creation. */
#define VALGRIND_HG_SEM_INIT_POST(_sem, _value) \
DO_CREQ_v_WW(_VG_USERREQ__HG_POSIX_SEM_INIT_POST, \
void*, (_sem), unsigned long, (_value))
/* Notify here immediately after a semaphore wait (an acquire-style
operation) */
#define VALGRIND_HG_SEM_WAIT_POST(_sem) \
DO_CREQ_v_W(_VG_USERREQ__HG_POSIX_SEM_WAIT_POST, \
void*,(_sem))
/* Notify here immediately before semaphore post (a release-style
operation) */
#define VALGRIND_HG_SEM_POST_PRE(_sem) \
DO_CREQ_v_W(_VG_USERREQ__HG_POSIX_SEM_POST_PRE, \
void*,(_sem))
/* Notify here immediately before semaphore destruction. */
#define VALGRIND_HG_SEM_DESTROY_PRE(_sem) \
DO_CREQ_v_W(_VG_USERREQ__HG_POSIX_SEM_DESTROY_PRE, \
void*, (_sem))
/* ----------------------------------------------------------
For describing barriers.
---------------------------------------------------------- */
/* Notify here immediately before barrier creation. _count is the
capacity. _resizable == 0 means the barrier may not be resized, 1
means it may be. */
#define VALGRIND_HG_BARRIER_INIT_PRE(_bar, _count, _resizable) \
DO_CREQ_v_WWW(_VG_USERREQ__HG_PTHREAD_BARRIER_INIT_PRE, \
void*,(_bar), \
unsigned long,(_count), \
unsigned long,(_resizable))
/* Notify here immediately before arrival at a barrier. */
#define VALGRIND_HG_BARRIER_WAIT_PRE(_bar) \
DO_CREQ_v_W(_VG_USERREQ__HG_PTHREAD_BARRIER_WAIT_PRE, \
void*,(_bar))
/* Notify here immediately before a resize (change of barrier
capacity). If _newcount >= the existing capacity, then there is no
change in the state of any threads waiting at the barrier. If
_newcount < the existing capacity, and >= _newcount threads are
currently waiting at the barrier, then this notification is
considered to also have the effect of telling the checker that all
waiting threads have now moved past the barrier. (I can't think of
any other sane semantics.) */
#define VALGRIND_HG_BARRIER_RESIZE_PRE(_bar, _newcount) \
DO_CREQ_v_WW(_VG_USERREQ__HG_PTHREAD_BARRIER_RESIZE_PRE, \
void*,(_bar), \
unsigned long,(_newcount))
/* Notify here immediately before barrier destruction. */
#define VALGRIND_HG_BARRIER_DESTROY_PRE(_bar) \
DO_CREQ_v_W(_VG_USERREQ__HG_PTHREAD_BARRIER_DESTROY_PRE, \
void*,(_bar))
/* ----------------------------------------------------------
For describing memory ownership changes.
---------------------------------------------------------- */
/* Clean memory state. This makes Helgrind forget everything it knew
about the specified memory range. Effectively this announces that
the specified memory range now "belongs" to the calling thread, so
that: (1) the calling thread can access it safely without
synchronisation, and (2) all other threads must sync with this one
to access it safely. This is particularly useful for memory
allocators that wish to recycle memory. */
#define VALGRIND_HG_CLEAN_MEMORY(_qzz_start, _qzz_len) \
DO_CREQ_v_WW(VG_USERREQ__HG_CLEAN_MEMORY, \
void*,(_qzz_start), \
unsigned long,(_qzz_len))
/* The same, but for the heap block starting at _qzz_blockstart. This
allows painting when we only know the address of an object, but not
its size, which is sometimes the case in C++ code involving
inheritance, and in which RTTI is not, for whatever reason,
available. Returns the number of bytes painted, which can be zero
for a zero-sized block. Hence, return values >= 0 indicate success
(the block was found), and the value -1 indicates block not
found, and -2 is returned when not running on Helgrind. */
#define VALGRIND_HG_CLEAN_MEMORY_HEAPBLOCK(_qzz_blockstart) \
(__extension__ \
({long int _npainted; \
DO_CREQ_W_W(_npainted, (-2)/*default*/, \
_VG_USERREQ__HG_CLEAN_MEMORY_HEAPBLOCK, \
void*,(_qzz_blockstart)); \
_npainted; \
}))
/* ----------------------------------------------------------
For error control.
---------------------------------------------------------- */
/* Tell H that an address range is not to be "tracked" until further
notice. This puts it in the NOACCESS state, in which case we
ignore all reads and writes to it. Useful for ignoring ranges of
memory where there might be races we don't want to see. If the
memory is subsequently reallocated via malloc/new/stack allocation,
then it is put back in the trackable state. Hence it is safe in
the situation where checking is disabled, the containing area is
deallocated and later reallocated for some other purpose. */
#define VALGRIND_HG_DISABLE_CHECKING(_qzz_start, _qzz_len) \
DO_CREQ_v_WW(_VG_USERREQ__HG_ARANGE_MAKE_UNTRACKED, \
void*,(_qzz_start), \
unsigned long,(_qzz_len))
/* And put it back into the normal "tracked" state, that is, make it
once again subject to the normal race-checking machinery. This
puts it in the same state as new memory allocated by this thread --
that is, basically owned exclusively by this thread. */
#define VALGRIND_HG_ENABLE_CHECKING(_qzz_start, _qzz_len) \
DO_CREQ_v_WW(_VG_USERREQ__HG_ARANGE_MAKE_TRACKED, \
void*,(_qzz_start), \
unsigned long,(_qzz_len))
/*----------------------------------------------------------------*/
/*--- ---*/
/*--- ThreadSanitizer-compatible requests ---*/
/*--- (mostly unimplemented) ---*/
/*--- ---*/
/*----------------------------------------------------------------*/
/* A quite-broad set of annotations, as used in the ThreadSanitizer
project. This implementation aims to be a (source-level)
compatible implementation of the macros defined in:
http://code.google.com/p/data-race-test/source
/browse/trunk/dynamic_annotations/dynamic_annotations.h
(some of the comments below are taken from the above file)
The implementation here is very incomplete, and intended as a
starting point. Many of the macros are unimplemented. Rather than
allowing unimplemented macros to silently do nothing, they cause an
assertion. Intention is to implement them on demand.
The major use of these macros is to make visible to race detectors,
the behaviour (effects) of user-implemented synchronisation
primitives, that the detectors could not otherwise deduce from the
normal observation of pthread etc calls.
Some of the macros are no-ops in Helgrind. That's because Helgrind
is a pure happens-before detector, whereas ThreadSanitizer uses a
hybrid lockset and happens-before scheme, which requires more
accurate annotations for correct operation.
The macros are listed in the same order as in dynamic_annotations.h
(URL just above).
I should point out that I am less than clear about the intended
semantics of quite a number of them. Comments and clarifications
welcomed!
*/
/* ----------------------------------------------------------------
These four allow description of user-level condition variables,
apparently in the style of POSIX's pthread_cond_t. Currently
unimplemented and will assert.
----------------------------------------------------------------
*/
/* Report that wait on the condition variable at address CV has
succeeded and the lock at address LOCK is now held. CV and LOCK
are completely arbitrary memory addresses which presumably mean
something to the application, but are meaningless to Helgrind. */
#define ANNOTATE_CONDVAR_LOCK_WAIT(cv, lock) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_CONDVAR_LOCK_WAIT")
/* Report that wait on the condition variable at CV has succeeded.
Variant w/o lock. */
#define ANNOTATE_CONDVAR_WAIT(cv) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_CONDVAR_WAIT")
/* Report that we are about to signal on the condition variable at
address CV. */
#define ANNOTATE_CONDVAR_SIGNAL(cv) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_CONDVAR_SIGNAL")
/* Report that we are about to signal_all on the condition variable at
CV. */
#define ANNOTATE_CONDVAR_SIGNAL_ALL(cv) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_CONDVAR_SIGNAL_ALL")
/* ----------------------------------------------------------------
Create completely arbitrary happens-before edges between threads.
If threads T1 .. Tn all do ANNOTATE_HAPPENS_BEFORE(obj) and later
(w.r.t. some notional global clock for the computation) thread Tm
does ANNOTATE_HAPPENS_AFTER(obj), then Helgrind will regard all
memory accesses done by T1 .. Tn before the ..BEFORE.. call as
happening-before all memory accesses done by Tm after the
..AFTER.. call. Hence Helgrind won't complain about races if Tm's
accesses afterwards are to the same locations as accesses before by
any of T1 .. Tn.
OBJ is a machine word (unsigned long, or void*), is completely
arbitrary, and denotes the identity of some synchronisation object
you're modelling.
You must do the _BEFORE call just before the real sync event on the
signaller's side, and _AFTER just after the real sync event on the
waiter's side.
If none of the rest of these macros make sense to you, at least
take the time to understand these two. They form the very essence
of describing arbitrary inter-thread synchronisation events to
Helgrind. You can get a long way just with them alone.
See also, extensive discussion on semantics of this in
https://bugs.kde.org/show_bug.cgi?id=243935
ANNOTATE_HAPPENS_BEFORE_FORGET_ALL(obj) is interim until such time
as bug 243935 is fully resolved. It instructs Helgrind to forget
about any ANNOTATE_HAPPENS_BEFORE calls on the specified object, in
effect putting it back in its original state. Once in that state,
a use of ANNOTATE_HAPPENS_AFTER on it has no effect on the calling
thread.
An implementation may optionally release resources it has
associated with 'obj' when ANNOTATE_HAPPENS_BEFORE_FORGET_ALL(obj)
happens. Users are recommended to use
ANNOTATE_HAPPENS_BEFORE_FORGET_ALL to indicate when a
synchronisation object is no longer needed, so as to avoid
potential indefinite resource leaks.
----------------------------------------------------------------
*/
#define ANNOTATE_HAPPENS_BEFORE(obj) \
DO_CREQ_v_W(_VG_USERREQ__HG_USERSO_SEND_PRE, void*,(obj))
#define ANNOTATE_HAPPENS_AFTER(obj) \
DO_CREQ_v_W(_VG_USERREQ__HG_USERSO_RECV_POST, void*,(obj))
#define ANNOTATE_HAPPENS_BEFORE_FORGET_ALL(obj) \
DO_CREQ_v_W(_VG_USERREQ__HG_USERSO_FORGET_ALL, void*,(obj))
/* ----------------------------------------------------------------
Memory publishing. The TSan sources say:
Report that the bytes in the range [pointer, pointer+size) are about
to be published safely. The race checker will create a happens-before
arc from the call ANNOTATE_PUBLISH_MEMORY_RANGE(pointer, size) to
subsequent accesses to this memory.
I'm not sure I understand what this means exactly, nor whether it
is relevant for a pure h-b detector. Leaving unimplemented for
now.
----------------------------------------------------------------
*/
#define ANNOTATE_PUBLISH_MEMORY_RANGE(pointer, size) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_PUBLISH_MEMORY_RANGE")
/* DEPRECATED. Don't use it. */
/* #define ANNOTATE_UNPUBLISH_MEMORY_RANGE(pointer, size) */
/* DEPRECATED. Don't use it. */
/* #define ANNOTATE_SWAP_MEMORY_RANGE(pointer, size) */
/* ----------------------------------------------------------------
TSan sources say:
Instruct the tool to create a happens-before arc between
MU->Unlock() and MU->Lock(). This annotation may slow down the
race detector; normally it is used only when it would be
difficult to annotate each of the mutex's critical sections
individually using the annotations above.
If MU is a posix pthread_mutex_t then Helgrind will do this anyway.
In any case, leave as unimp for now. I'm unsure about the intended
behaviour.
----------------------------------------------------------------
*/
#define ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX(mu) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX")
/* Deprecated. Use ANNOTATE_PURE_HAPPENS_BEFORE_MUTEX. */
/* #define ANNOTATE_MUTEX_IS_USED_AS_CONDVAR(mu) */
/* ----------------------------------------------------------------
TSan sources say:
Annotations useful when defining memory allocators, or when
memory that was protected in one way starts to be protected in
another.
Report that a new memory at "address" of size "size" has been
allocated. This might be used when the memory has been retrieved
from a free list and is about to be reused, or when a the locking
discipline for a variable changes.
AFAICS this is the same as VALGRIND_HG_CLEAN_MEMORY.
----------------------------------------------------------------
*/
#define ANNOTATE_NEW_MEMORY(address, size) \
VALGRIND_HG_CLEAN_MEMORY((address), (size))
/* ----------------------------------------------------------------
TSan sources say:
Annotations useful when defining FIFO queues that transfer data
between threads.
All unimplemented. Am not claiming to understand this (yet).
----------------------------------------------------------------
*/
/* Report that the producer-consumer queue object at address PCQ has
been created. The ANNOTATE_PCQ_* annotations should be used only
for FIFO queues. For non-FIFO queues use ANNOTATE_HAPPENS_BEFORE
(for put) and ANNOTATE_HAPPENS_AFTER (for get). */
#define ANNOTATE_PCQ_CREATE(pcq) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_PCQ_CREATE")
/* Report that the queue at address PCQ is about to be destroyed. */
#define ANNOTATE_PCQ_DESTROY(pcq) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_PCQ_DESTROY")
/* Report that we are about to put an element into a FIFO queue at
address PCQ. */
#define ANNOTATE_PCQ_PUT(pcq) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_PCQ_PUT")
/* Report that we've just got an element from a FIFO queue at address
PCQ. */
#define ANNOTATE_PCQ_GET(pcq) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_PCQ_GET")
/* ----------------------------------------------------------------
Annotations that suppress errors. It is usually better to express
the program's synchronization using the other annotations, but
these can be used when all else fails.
Currently these are all unimplemented. I can't think of a simple
way to implement them without at least some performance overhead.
----------------------------------------------------------------
*/
/* Report that we may have a benign race at "pointer", with size
"sizeof(*(pointer))". "pointer" must be a non-void* pointer. Insert at the
point where "pointer" has been allocated, preferably close to the point
where the race happens. See also ANNOTATE_BENIGN_RACE_STATIC.
XXX: what's this actually supposed to do? And what's the type of
DESCRIPTION? When does the annotation stop having an effect?
*/
#define ANNOTATE_BENIGN_RACE(pointer, description) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_BENIGN_RACE")
/* Same as ANNOTATE_BENIGN_RACE(address, description), but applies to
the memory range [address, address+size). */
#define ANNOTATE_BENIGN_RACE_SIZED(address, size, description) \
VALGRIND_HG_DISABLE_CHECKING(address, size)
/* Request the analysis tool to ignore all reads in the current thread
until ANNOTATE_IGNORE_READS_END is called. Useful to ignore
intentional racey reads, while still checking other reads and all
writes. */
#define ANNOTATE_IGNORE_READS_BEGIN() \
_HG_CLIENTREQ_UNIMP("ANNOTATE_IGNORE_READS_BEGIN")
/* Stop ignoring reads. */
#define ANNOTATE_IGNORE_READS_END() \
_HG_CLIENTREQ_UNIMP("ANNOTATE_IGNORE_READS_END")
/* Similar to ANNOTATE_IGNORE_READS_BEGIN, but ignore writes. */
#define ANNOTATE_IGNORE_WRITES_BEGIN() \
_HG_CLIENTREQ_UNIMP("ANNOTATE_IGNORE_WRITES_BEGIN")
/* Stop ignoring writes. */
#define ANNOTATE_IGNORE_WRITES_END() \
_HG_CLIENTREQ_UNIMP("ANNOTATE_IGNORE_WRITES_END")
/* Start ignoring all memory accesses (reads and writes). */
#define ANNOTATE_IGNORE_READS_AND_WRITES_BEGIN() \
do { \
ANNOTATE_IGNORE_READS_BEGIN(); \
ANNOTATE_IGNORE_WRITES_BEGIN(); \
} while (0)
/* Stop ignoring all memory accesses. */
#define ANNOTATE_IGNORE_READS_AND_WRITES_END() \
do { \
ANNOTATE_IGNORE_WRITES_END(); \
ANNOTATE_IGNORE_READS_END(); \
} while (0)
/* ----------------------------------------------------------------
Annotations useful for debugging.
Again, so for unimplemented, partly for performance reasons.
----------------------------------------------------------------
*/
/* Request to trace every access to ADDRESS. */
#define ANNOTATE_TRACE_MEMORY(address) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_TRACE_MEMORY")
/* Report the current thread name to a race detector. */
#define ANNOTATE_THREAD_NAME(name) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_THREAD_NAME")
/* ----------------------------------------------------------------
Annotations for describing behaviour of user-implemented lock
primitives. In all cases, the LOCK argument is a completely
arbitrary machine word (unsigned long, or void*) and can be any
value which gives a unique identity to the lock objects being
modelled.
We just pretend they're ordinary posix rwlocks. That'll probably
give some rather confusing wording in error messages, claiming that
the arbitrary LOCK values are pthread_rwlock_t*'s, when in fact
they are not. Ah well.
----------------------------------------------------------------
*/
/* Report that a lock has just been created at address LOCK. */
#define ANNOTATE_RWLOCK_CREATE(lock) \
DO_CREQ_v_W(_VG_USERREQ__HG_PTHREAD_RWLOCK_INIT_POST, \
void*,(lock))
/* Report that the lock at address LOCK is about to be destroyed. */
#define ANNOTATE_RWLOCK_DESTROY(lock) \
DO_CREQ_v_W(_VG_USERREQ__HG_PTHREAD_RWLOCK_DESTROY_PRE, \
void*,(lock))
/* Report that the lock at address LOCK has just been acquired.
is_w=1 for writer lock, is_w=0 for reader lock. */
#define ANNOTATE_RWLOCK_ACQUIRED(lock, is_w) \
DO_CREQ_v_WW(_VG_USERREQ__HG_PTHREAD_RWLOCK_LOCK_POST, \
void*,(lock), unsigned long,(is_w))
/* Report that the lock at address LOCK is about to be released. */
#define ANNOTATE_RWLOCK_RELEASED(lock, is_w) \
DO_CREQ_v_W(_VG_USERREQ__HG_PTHREAD_RWLOCK_UNLOCK_PRE, \
void*,(lock)) /* is_w is ignored */
/* -------------------------------------------------------------
Annotations useful when implementing barriers. They are not
normally needed by modules that merely use barriers.
The "barrier" argument is a pointer to the barrier object.
----------------------------------------------------------------
*/
/* Report that the "barrier" has been initialized with initial
"count". If 'reinitialization_allowed' is true, initialization is
allowed to happen multiple times w/o calling barrier_destroy() */
#define ANNOTATE_BARRIER_INIT(barrier, count, reinitialization_allowed) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_BARRIER_INIT")
/* Report that we are about to enter barrier_wait("barrier"). */
#define ANNOTATE_BARRIER_WAIT_BEFORE(barrier) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_BARRIER_DESTROY")
/* Report that we just exited barrier_wait("barrier"). */
#define ANNOTATE_BARRIER_WAIT_AFTER(barrier) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_BARRIER_DESTROY")
/* Report that the "barrier" has been destroyed. */
#define ANNOTATE_BARRIER_DESTROY(barrier) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_BARRIER_DESTROY")
/* ----------------------------------------------------------------
Annotations useful for testing race detectors.
----------------------------------------------------------------
*/
/* Report that we expect a race on the variable at ADDRESS. Use only
in unit tests for a race detector. */
#define ANNOTATE_EXPECT_RACE(address, description) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_EXPECT_RACE")
/* A no-op. Insert where you like to test the interceptors. */
#define ANNOTATE_NO_OP(arg) \
_HG_CLIENTREQ_UNIMP("ANNOTATE_NO_OP")
/* Force the race detector to flush its state. The actual effect depends on
* the implementation of the detector. */
#define ANNOTATE_FLUSH_STATE() \
_HG_CLIENTREQ_UNIMP("ANNOTATE_FLUSH_STATE")
#endif /* __HELGRIND_H */