/******************************************************************************
*
* Copyright (C) 2009-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This is the API implementation file for the Multi-Channel Adaptation
* Protocol (MCAP).
*
******************************************************************************/
#include <string.h>
#include "bt_target.h"
#include "btm_api.h"
#include "btm_int.h"
#include "mca_api.h"
#include "mca_defs.h"
#include "mca_int.h"
#include "wcassert.h"
#include "btu.h"
/*******************************************************************************
**
** Function mca_process_timeout
**
** Description This function is called by BTU when an MCA timer
** expires.
**
** This function is for use internal to the stack only.
**
** Returns void
**
*******************************************************************************/
void mca_process_timeout(TIMER_LIST_ENT *p_tle)
{
if(p_tle->event == BTU_TTYPE_MCA_CCB_RSP)
{
p_tle->event = 0;
mca_ccb_event ((tMCA_CCB *) p_tle->param, MCA_CCB_RSP_TOUT_EVT, NULL);
}
}
/*******************************************************************************
**
** Function MCA_Init
**
** Description Initialize MCAP main control block.
** This function is called at stack start up.
**
** Returns void
**
*******************************************************************************/
void MCA_Init(void)
{
memset(&mca_cb, 0, sizeof(tMCA_CB));
#if defined(MCA_INITIAL_TRACE_LEVEL)
mca_cb.trace_level = MCA_INITIAL_TRACE_LEVEL;
#else
mca_cb.trace_level = BT_TRACE_LEVEL_NONE;
#endif
}
/*******************************************************************************
**
** Function MCA_SetTraceLevel
**
** Description This function sets the debug trace level for MCA.
** If 0xff is passed, the current trace level is returned.
**
** Input Parameters:
** level: The level to set the MCA tracing to:
** 0xff-returns the current setting.
** 0-turns off tracing.
** >= 1-Errors.
** >= 2-Warnings.
** >= 3-APIs.
** >= 4-Events.
** >= 5-Debug.
**
** Returns The new trace level or current trace level if
** the input parameter is 0xff.
**
*******************************************************************************/
UINT8 MCA_SetTraceLevel (UINT8 level)
{
if (level != 0xFF)
mca_cb.trace_level = level;
return (mca_cb.trace_level);
}
/*******************************************************************************
**
** Function MCA_Register
**
** Description This function registers an MCAP implementation.
** It is assumed that the control channel PSM and data channel
** PSM are not used by any other instances of the stack.
** If the given p_reg->ctrl_psm is 0, this handle is INT only.
**
** Returns 0, if failed. Otherwise, the MCA handle.
**
*******************************************************************************/
tMCA_HANDLE MCA_Register(tMCA_REG *p_reg, tMCA_CTRL_CBACK *p_cback)
{
tMCA_RCB *p_rcb;
tMCA_HANDLE handle = 0;
tL2CAP_APPL_INFO l2c_cacp_appl;
tL2CAP_APPL_INFO l2c_dacp_appl;
WC_ASSERT(p_reg != NULL );
WC_ASSERT(p_cback != NULL );
MCA_TRACE_API2 ("MCA_Register: ctrl_psm:0x%x, data_psm:0x%x", p_reg->ctrl_psm, p_reg->data_psm);
if ( (p_rcb = mca_rcb_alloc (p_reg)) != NULL)
{
if (p_reg->ctrl_psm)
{
if (L2C_INVALID_PSM(p_reg->ctrl_psm) || L2C_INVALID_PSM(p_reg->data_psm))
{
MCA_TRACE_ERROR0 ("INVALID_PSM");
return 0;
}
l2c_cacp_appl = *(tL2CAP_APPL_INFO *)&mca_l2c_int_appl;
l2c_cacp_appl.pL2CA_ConnectCfm_Cb = NULL;
l2c_dacp_appl = *(tL2CAP_APPL_INFO *)&l2c_cacp_appl;
l2c_cacp_appl.pL2CA_ConnectInd_Cb = mca_l2c_cconn_ind_cback;
l2c_dacp_appl.pL2CA_ConnectInd_Cb = mca_l2c_dconn_ind_cback;
if (L2CA_Register(p_reg->ctrl_psm, (tL2CAP_APPL_INFO *) &l2c_cacp_appl) &&
L2CA_Register(p_reg->data_psm, (tL2CAP_APPL_INFO *) &l2c_dacp_appl))
{
/* set security level */
BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_MCAP_CTRL, p_reg->sec_mask,
p_reg->ctrl_psm, BTM_SEC_PROTO_MCA, MCA_CTRL_TCID);
/* in theory, we do not need this one for data_psm
* If we don't, L2CAP rejects with security block (3),
* which is different reject code from what MCAP spec suggests.
* we set this one, so mca_l2c_dconn_ind_cback can reject /w no resources (4) */
BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_MCAP_DATA, p_reg->sec_mask,
p_reg->data_psm, BTM_SEC_PROTO_MCA, MCA_CTRL_TCID);
}
else
{
MCA_TRACE_ERROR0 ("Failed to register to L2CAP");
return 0;
}
}
else
p_rcb->reg.data_psm = 0;
handle = mca_rcb_to_handle (p_rcb);
p_rcb->p_cback = p_cback;
p_rcb->reg.rsp_tout = p_reg->rsp_tout;
}
return handle;
}
/*******************************************************************************
**
** Function MCA_Deregister
**
** Description This function is called to deregister an MCAP implementation.
** Before this function can be called, all control and data
** channels must be removed with MCA_DisconnectReq and MCA_CloseReq.
**
** Returns void
**
*******************************************************************************/
void MCA_Deregister(tMCA_HANDLE handle)
{
tMCA_RCB *p_rcb = mca_rcb_by_handle(handle);
MCA_TRACE_API1 ("MCA_Deregister: %d", handle);
if (p_rcb && p_rcb->reg.ctrl_psm)
{
L2CA_Deregister(p_rcb->reg.ctrl_psm);
L2CA_Deregister(p_rcb->reg.data_psm);
btm_sec_clr_service_by_psm (p_rcb->reg.ctrl_psm);
btm_sec_clr_service_by_psm (p_rcb->reg.data_psm);
}
mca_rcb_dealloc(handle);
}
/*******************************************************************************
**
** Function MCA_CreateDep
**
** Description Create a data endpoint. If the MDEP is created successfully,
** the MDEP ID is returned in *p_dep. After a data endpoint is
** created, an application can initiate a connection between this
** endpoint and an endpoint on a peer device.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_CreateDep(tMCA_HANDLE handle, tMCA_DEP *p_dep, tMCA_CS *p_cs)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
int i;
tMCA_RCB *p_rcb = mca_rcb_by_handle(handle);
tMCA_CS *p_depcs;
WC_ASSERT(p_dep != NULL );
WC_ASSERT(p_cs != NULL );
WC_ASSERT(p_cs->p_data_cback != NULL );
MCA_TRACE_API1 ("MCA_CreateDep: %d", handle);
if (p_rcb)
{
if (p_cs->max_mdl > MCA_NUM_MDLS)
{
MCA_TRACE_ERROR1 ("max_mdl: %d is too big", p_cs->max_mdl );
result = MCA_BAD_PARAMS;
}
else
{
p_depcs = p_rcb->dep;
if (p_cs->type == MCA_TDEP_ECHO)
{
if (p_depcs->p_data_cback)
{
MCA_TRACE_ERROR0 ("Already has ECHO MDEP");
return MCA_NO_RESOURCES;
}
memcpy (p_depcs, p_cs, sizeof (tMCA_CS));
*p_dep = 0;
result = MCA_SUCCESS;
}
else
{
result = MCA_NO_RESOURCES;
/* non-echo MDEP starts from 1 */
p_depcs++;
for (i=1; i<MCA_NUM_DEPS; i++, p_depcs++)
{
if (p_depcs->p_data_cback == NULL)
{
memcpy (p_depcs, p_cs, sizeof (tMCA_CS));
/* internally use type as the mdep id */
p_depcs->type = i;
*p_dep = i;
result = MCA_SUCCESS;
break;
}
}
}
}
}
return result;
}
/*******************************************************************************
**
** Function MCA_DeleteDep
**
** Description Delete a data endpoint. This function is called when
** the implementation is no longer using a data endpoint.
** If this function is called when the endpoint is connected
** the connection is closed and the data endpoint
** is removed.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_DeleteDep(tMCA_HANDLE handle, tMCA_DEP dep)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_RCB *p_rcb = mca_rcb_by_handle(handle);
tMCA_DCB *p_dcb;
int i, max;
tMCA_CS *p_depcs;
MCA_TRACE_API2 ("MCA_DeleteDep: %d dep:%d", handle, dep);
if (p_rcb)
{
if (dep < MCA_NUM_DEPS && p_rcb->dep[dep].p_data_cback)
{
result = MCA_SUCCESS;
p_rcb->dep[dep].p_data_cback = NULL;
p_depcs = &(p_rcb->dep[dep]);
i = handle - 1;
max = MCA_NUM_MDLS*MCA_NUM_LINKS;
p_dcb = &mca_cb.dcb[i*max];
/* make sure no MDL exists for this MDEP */
for (i=0; i<max; i++, p_dcb++)
{
if (p_dcb->state && p_dcb->p_cs == p_depcs)
{
mca_dcb_event(p_dcb, MCA_DCB_API_CLOSE_EVT, NULL);
}
}
}
}
return result;
}
/*******************************************************************************
**
** Function MCA_ConnectReq
**
** Description This function initiates an MCAP control channel connection
** to the peer device. When the connection is completed, an
** MCA_CONNECT_IND_EVT is reported to the application via its
** control callback function.
** This control channel is identified by the tMCA_CL.
** If the connection attempt fails, an MCA_DISCONNECT_IND_EVT is
** reported. The security mask parameter overrides the outgoing
** security mask set in MCA_Register().
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_ConnectReq(tMCA_HANDLE handle, BD_ADDR bd_addr,
UINT16 ctrl_psm, UINT16 sec_mask)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_CCB *p_ccb;
tMCA_TC_TBL *p_tbl;
MCA_TRACE_API2 ("MCA_ConnectReq: %d psm:0x%x", handle, ctrl_psm);
if ((p_ccb = mca_ccb_by_bd(handle, bd_addr)) == NULL)
p_ccb = mca_ccb_alloc(handle, bd_addr);
else
{
MCA_TRACE_ERROR0 ("control channel already exists");
return MCA_BUSY;
}
if (p_ccb)
{
p_ccb->ctrl_vpsm = L2CA_Register (ctrl_psm, (tL2CAP_APPL_INFO *)&mca_l2c_int_appl);
result = MCA_NO_RESOURCES;
if (p_ccb->ctrl_vpsm)
{
BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_MCAP_CTRL, sec_mask,
p_ccb->ctrl_vpsm, BTM_SEC_PROTO_MCA, MCA_CTRL_TCID);
p_ccb->lcid = mca_l2c_open_req(bd_addr, p_ccb->ctrl_vpsm, NULL);
if (p_ccb->lcid)
{
p_tbl = mca_tc_tbl_calloc(p_ccb);
if (p_tbl)
{
p_tbl->state = MCA_TC_ST_CONN;
p_ccb->sec_mask = sec_mask;
result = MCA_SUCCESS;
}
}
}
if (result != MCA_SUCCESS)
mca_ccb_dealloc (p_ccb, NULL);
}
return result;
}
/*******************************************************************************
**
** Function MCA_DisconnectReq
**
** Description This function disconnect an MCAP control channel
** to the peer device.
** If associated data channel exists, they are disconnected.
** When the MCL is disconnected an MCA_DISCONNECT_IND_EVT is
** reported to the application via its control callback function.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_DisconnectReq(tMCA_CL mcl)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_CCB *p_ccb = mca_ccb_by_hdl(mcl);
MCA_TRACE_API1 ("MCA_DisconnectReq: %d ", mcl);
if (p_ccb)
{
result = MCA_SUCCESS;
mca_ccb_event (p_ccb, MCA_CCB_API_DISCONNECT_EVT, NULL);
}
return result;
}
/*******************************************************************************
**
** Function MCA_CreateMdl
**
** Description This function sends a CREATE_MDL request to the peer device.
** When the response is received, a MCA_CREATE_CFM_EVT is reported
** with the given MDL ID.
** If the response is successful, a data channel is open
** with the given p_chnl_cfg
** If p_chnl_cfg is NULL, the data channel is not initiated until
** MCA_DataChnlCfg is called to provide the p_chnl_cfg.
** When the data channel is open successfully, a MCA_OPEN_CFM_EVT
** is reported. This data channel is identified as tMCA_DL.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_CreateMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm,
UINT16 mdl_id, UINT8 peer_dep_id,
UINT8 cfg, const tMCA_CHNL_CFG *p_chnl_cfg)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_CCB *p_ccb = mca_ccb_by_hdl(mcl);
tMCA_CCB_MSG *p_evt_data;
tMCA_DCB *p_dcb;
MCA_TRACE_API4 ("MCA_CreateMdl: %d dep=%d mdl_id=%d peer_dep_id=%d", mcl, dep, mdl_id, peer_dep_id);
if (p_ccb)
{
if (p_ccb->p_tx_req || p_ccb->p_rx_msg || p_ccb->cong)
{
MCA_TRACE_ERROR0 ("pending req");
return MCA_BUSY;
}
if ((peer_dep_id > MCA_MAX_MDEP_ID) || (!MCA_IS_VALID_MDL_ID(mdl_id)))
{
MCA_TRACE_ERROR2 ("bad peer dep id:%d or bad mdl id: %d ", peer_dep_id, mdl_id);
return MCA_BAD_PARAMS;
}
if (mca_ccb_uses_mdl_id(p_ccb, mdl_id))
{
MCA_TRACE_ERROR1 ("mdl id: %d is used in the control link", mdl_id);
return MCA_BAD_MDL_ID;
}
p_dcb = mca_dcb_alloc(p_ccb, dep);
result = MCA_NO_RESOURCES;
if (p_dcb)
{
/* save the info required by dcb connection */
p_dcb->p_chnl_cfg = p_chnl_cfg;
p_dcb->mdl_id = mdl_id;
p_evt_data = (tMCA_CCB_MSG *)GKI_getbuf (sizeof(tMCA_CCB_MSG));
if (p_evt_data)
{
if (!p_ccb->data_vpsm)
p_ccb->data_vpsm = L2CA_Register (data_psm, (tL2CAP_APPL_INFO *)&mca_l2c_int_appl);
if (p_ccb->data_vpsm)
{
p_evt_data->dcb_idx = mca_dcb_to_hdl (p_dcb);
p_evt_data->mdep_id = peer_dep_id;
p_evt_data->mdl_id = mdl_id;
p_evt_data->param = cfg;
p_evt_data->op_code = MCA_OP_MDL_CREATE_REQ;
p_evt_data->hdr.event = MCA_CCB_API_REQ_EVT;
p_evt_data->hdr.layer_specific = FALSE;
mca_ccb_event(p_ccb, MCA_CCB_API_REQ_EVT, (tMCA_CCB_EVT *)p_evt_data);
return MCA_SUCCESS;
}
else
GKI_freebuf (p_evt_data);
}
mca_dcb_dealloc(p_dcb, NULL);
}
}
return result;
}
/*******************************************************************************
**
** Function MCA_CreateMdlRsp
**
** Description This function sends a CREATE_MDL response to the peer device
** in response to a received MCA_CREATE_IND_EVT.
** If the rsp_code is successful, a data channel is open
** with the given p_chnl_cfg
** When the data channel is open successfully, a MCA_OPEN_IND_EVT
** is reported. This data channel is identified as tMCA_DL.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_CreateMdlRsp(tMCA_CL mcl, tMCA_DEP dep,
UINT16 mdl_id, UINT8 cfg, UINT8 rsp_code,
const tMCA_CHNL_CFG *p_chnl_cfg)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_CCB *p_ccb = mca_ccb_by_hdl(mcl);
tMCA_CCB_MSG evt_data;
tMCA_DCB *p_dcb;
MCA_TRACE_API5 ("MCA_CreateMdlRsp: %d dep=%d mdl_id=%d cfg=%d rsp_code=%d", mcl, dep, mdl_id, cfg, rsp_code);
WC_ASSERT(p_chnl_cfg != NULL );
if (p_ccb)
{
if (p_ccb->cong)
{
MCA_TRACE_ERROR0 ("congested");
return MCA_BUSY;
}
if (p_ccb->p_rx_msg && (p_ccb->p_rx_msg->mdep_id == dep )
&& (p_ccb->p_rx_msg->mdl_id == mdl_id) && (p_ccb->p_rx_msg->op_code == MCA_OP_MDL_CREATE_REQ))
{
result = MCA_SUCCESS;
evt_data.dcb_idx = 0;
if (rsp_code == MCA_RSP_SUCCESS)
{
p_dcb = mca_dcb_alloc(p_ccb, dep);
if (p_dcb)
{
evt_data.dcb_idx = mca_dcb_to_hdl(p_dcb);
p_dcb->p_chnl_cfg = p_chnl_cfg;
p_dcb->mdl_id = mdl_id;
}
else
{
rsp_code = MCA_RSP_MDEP_BUSY;
result = MCA_NO_RESOURCES;
}
}
if (result == MCA_SUCCESS)
{
evt_data.mdl_id = mdl_id;
evt_data.param = cfg;
evt_data.rsp_code = rsp_code;
evt_data.op_code = MCA_OP_MDL_CREATE_RSP;
mca_ccb_event(p_ccb, MCA_CCB_API_RSP_EVT, (tMCA_CCB_EVT *)&evt_data);
}
}
else
{
MCA_TRACE_ERROR0 ("The given MCL is not expecting a MCA_CreateMdlRsp with the given parameters" );
result = MCA_BAD_PARAMS;
}
}
return result;
}
/*******************************************************************************
**
** Function MCA_CloseReq
**
** Description Close a data channel. When the channel is closed, an
** MCA_CLOSE_CFM_EVT is sent to the application via the
** control callback function for this handle.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_CloseReq(tMCA_DL mdl)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_DCB *p_dcb = mca_dcb_by_hdl(mdl);
MCA_TRACE_API1 ("MCA_CloseReq: %d ", mdl);
if (p_dcb)
{
result = MCA_SUCCESS;
mca_dcb_event(p_dcb, MCA_DCB_API_CLOSE_EVT, NULL);
}
return result;
}
/*******************************************************************************
**
** Function MCA_ReconnectMdl
**
** Description This function sends a RECONNECT_MDL request to the peer device.
** When the response is received, a MCA_RECONNECT_CFM_EVT is reported.
** If p_chnl_cfg is NULL, the data channel is not initiated until
** MCA_DataChnlCfg is called to provide the p_chnl_cfg.
** If the response is successful, a data channel is open.
** When the data channel is open successfully, a MCA_OPEN_CFM_EVT
** is reported.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_ReconnectMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm,
UINT16 mdl_id, const tMCA_CHNL_CFG *p_chnl_cfg)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_CCB *p_ccb = mca_ccb_by_hdl(mcl);
tMCA_CCB_MSG *p_evt_data;
tMCA_DCB *p_dcb;
MCA_TRACE_API1 ("MCA_ReconnectMdl: %d ", mcl);
WC_ASSERT(p_chnl_cfg != NULL );
if (p_ccb)
{
if (p_ccb->p_tx_req || p_ccb->p_rx_msg || p_ccb->cong)
{
MCA_TRACE_ERROR0 ("pending req");
return MCA_BUSY;
}
if (!MCA_IS_VALID_MDL_ID(mdl_id))
{
MCA_TRACE_ERROR1 ("bad mdl id: %d ", mdl_id);
return MCA_BAD_PARAMS;
}
if (mca_ccb_uses_mdl_id(p_ccb, mdl_id))
{
MCA_TRACE_ERROR1 ("mdl id: %d is used in the control link", mdl_id);
return MCA_BAD_MDL_ID;
}
p_dcb = mca_dcb_alloc(p_ccb, dep);
result = MCA_NO_RESOURCES;
if (p_dcb)
{
p_dcb->p_chnl_cfg = p_chnl_cfg;
p_dcb->mdl_id = mdl_id;
p_evt_data = (tMCA_CCB_MSG *)GKI_getbuf (sizeof(tMCA_CCB_MSG));
if (p_evt_data)
{
if (!p_ccb->data_vpsm)
p_ccb->data_vpsm = L2CA_Register (data_psm, (tL2CAP_APPL_INFO *)&mca_l2c_int_appl);
p_evt_data->dcb_idx = mca_dcb_to_hdl(p_dcb);
p_evt_data->mdl_id = mdl_id;
p_evt_data->op_code = MCA_OP_MDL_RECONNECT_REQ;
p_evt_data->hdr.event = MCA_CCB_API_REQ_EVT;
mca_ccb_event(p_ccb, MCA_CCB_API_REQ_EVT, (tMCA_CCB_EVT *)p_evt_data);
return MCA_SUCCESS;
}
mca_dcb_dealloc(p_dcb, NULL);
}
}
return result;
}
/*******************************************************************************
**
** Function MCA_ReconnectMdlRsp
**
** Description This function sends a RECONNECT_MDL response to the peer device
** in response to a MCA_RECONNECT_IND_EVT event.
** If the response is successful, a data channel is open.
** When the data channel is open successfully, a MCA_OPEN_IND_EVT
** is reported.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_ReconnectMdlRsp(tMCA_CL mcl, tMCA_DEP dep,
UINT16 mdl_id, UINT8 rsp_code,
const tMCA_CHNL_CFG *p_chnl_cfg)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_CCB *p_ccb = mca_ccb_by_hdl(mcl);
tMCA_CCB_MSG evt_data;
tMCA_DCB *p_dcb;
MCA_TRACE_API1 ("MCA_ReconnectMdlRsp: %d ", mcl);
WC_ASSERT(p_chnl_cfg != NULL );
if (p_ccb)
{
if (p_ccb->cong)
{
MCA_TRACE_ERROR0 ("congested");
return MCA_BUSY;
}
if (p_ccb->p_rx_msg && (p_ccb->p_rx_msg->mdl_id == mdl_id) &&
(p_ccb->p_rx_msg->op_code == MCA_OP_MDL_RECONNECT_REQ))
{
result = MCA_SUCCESS;
evt_data.dcb_idx = 0;
if (rsp_code == MCA_RSP_SUCCESS)
{
p_dcb = mca_dcb_alloc(p_ccb, dep);
if (p_dcb)
{
evt_data.dcb_idx = mca_dcb_to_hdl(p_dcb);
p_dcb->p_chnl_cfg = p_chnl_cfg;
p_dcb->mdl_id = mdl_id;
}
else
{
MCA_TRACE_ERROR0 ("Out of MDL for this MDEP");
rsp_code = MCA_RSP_MDEP_BUSY;
result = MCA_NO_RESOURCES;
}
}
evt_data.mdl_id = mdl_id;
evt_data.rsp_code = rsp_code;
evt_data.op_code = MCA_OP_MDL_RECONNECT_RSP;
mca_ccb_event(p_ccb, MCA_CCB_API_RSP_EVT, (tMCA_CCB_EVT *)&evt_data);
}
else
{
MCA_TRACE_ERROR0 ("The given MCL is not expecting a MCA_ReconnectMdlRsp with the given parameters" );
result = MCA_BAD_PARAMS;
}
}
return result;
}
/*******************************************************************************
**
** Function MCA_DataChnlCfg
**
** Description This function initiates a data channel connection toward the
** connected peer device.
** When the data channel is open successfully, a MCA_OPEN_CFM_EVT
** is reported. This data channel is identified as tMCA_DL.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_DataChnlCfg(tMCA_CL mcl, const tMCA_CHNL_CFG *p_chnl_cfg)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_CCB *p_ccb = mca_ccb_by_hdl(mcl);
tMCA_DCB *p_dcb;
tMCA_TC_TBL *p_tbl;
MCA_TRACE_API1 ("MCA_DataChnlCfg: %d ", mcl);
WC_ASSERT(p_chnl_cfg != NULL );
if (p_ccb)
{
result = MCA_NO_RESOURCES;
if ((p_ccb->p_tx_req == NULL) || (p_ccb->status != MCA_CCB_STAT_PENDING) ||
((p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx)) == NULL))
{
MCA_TRACE_ERROR1 ("The given MCL is not expecting this API:%d", p_ccb->status);
return result;
}
p_dcb->p_chnl_cfg = p_chnl_cfg;
BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_MCAP_DATA, p_ccb->sec_mask,
p_ccb->data_vpsm, BTM_SEC_PROTO_MCA, p_ccb->p_tx_req->dcb_idx);
p_dcb->lcid = mca_l2c_open_req(p_ccb->peer_addr, p_ccb->data_vpsm, p_dcb->p_chnl_cfg);
if (p_dcb->lcid)
{
p_tbl = mca_tc_tbl_dalloc(p_dcb);
if (p_tbl)
{
p_tbl->state = MCA_TC_ST_CONN;
result = MCA_SUCCESS;
}
}
}
return result;
}
/*******************************************************************************
**
** Function MCA_Abort
**
** Description This function sends a ABORT_MDL request to the peer device.
** When the response is received, a MCA_ABORT_CFM_EVT is reported.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_Abort(tMCA_CL mcl)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_CCB *p_ccb = mca_ccb_by_hdl(mcl);
tMCA_CCB_MSG *p_evt_data;
tMCA_DCB *p_dcb;
MCA_TRACE_API1 ("MCA_Abort: %d", mcl);
if (p_ccb)
{
result = MCA_NO_RESOURCES;
/* verify that we are waiting for data channel to come up with the given mdl */
if ((p_ccb->p_tx_req == NULL) || (p_ccb->status != MCA_CCB_STAT_PENDING) ||
((p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx)) == NULL))
{
MCA_TRACE_ERROR1 ("The given MCL is not expecting this API:%d", p_ccb->status);
return result;
}
if (p_ccb->cong)
{
MCA_TRACE_ERROR0 ("congested");
return MCA_BUSY;
}
result = MCA_NO_RESOURCES;
p_evt_data = (tMCA_CCB_MSG *)GKI_getbuf (sizeof(tMCA_CCB_MSG));
if (p_evt_data)
{
result = MCA_SUCCESS;
p_evt_data->op_code = MCA_OP_MDL_ABORT_REQ;
p_evt_data->hdr.event = MCA_CCB_API_REQ_EVT;
mca_ccb_event(p_ccb, MCA_CCB_API_REQ_EVT, (tMCA_CCB_EVT *)p_evt_data);
}
}
return result;
}
/*******************************************************************************
**
** Function MCA_Delete
**
** Description This function sends a DELETE_MDL request to the peer device.
** When the response is received, a MCA_DELETE_CFM_EVT is reported.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_Delete(tMCA_CL mcl, UINT16 mdl_id)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_CCB *p_ccb = mca_ccb_by_hdl(mcl);
tMCA_CCB_MSG *p_evt_data;
MCA_TRACE_API1 ("MCA_Delete: %d ", mcl);
if (p_ccb)
{
if (p_ccb->cong)
{
MCA_TRACE_ERROR0 ("congested");
return MCA_BUSY;
}
if (!MCA_IS_VALID_MDL_ID(mdl_id) && (mdl_id != MCA_ALL_MDL_ID))
{
MCA_TRACE_ERROR1 ("bad mdl id: %d ", mdl_id);
return MCA_BAD_PARAMS;
}
p_evt_data = (tMCA_CCB_MSG *)GKI_getbuf (sizeof(tMCA_CCB_MSG));
if (p_evt_data)
{
result = MCA_SUCCESS;
p_evt_data->mdl_id = mdl_id;
p_evt_data->op_code = MCA_OP_MDL_DELETE_REQ;
p_evt_data->hdr.event = MCA_CCB_API_REQ_EVT;
mca_ccb_event(p_ccb, MCA_CCB_API_REQ_EVT, (tMCA_CCB_EVT *)p_evt_data);
}
else
result = MCA_NO_RESOURCES;
}
return result;
}
/*******************************************************************************
**
** Function MCA_WriteReq
**
** Description Send a data packet to the peer device.
**
** The application passes the packet using the BT_HDR structure.
** The offset field must be equal to or greater than L2CAP_MIN_OFFSET.
** This allows enough space in the buffer for the L2CAP header.
**
** The memory pointed to by p_pkt must be a GKI buffer
** allocated by the application. This buffer will be freed
** by the protocol stack; the application must not free
** this buffer.
**
** Returns MCA_SUCCESS if successful, otherwise error.
**
*******************************************************************************/
tMCA_RESULT MCA_WriteReq(tMCA_DL mdl, BT_HDR *p_pkt)
{
tMCA_RESULT result = MCA_BAD_HANDLE;
tMCA_DCB *p_dcb = mca_dcb_by_hdl(mdl);
tMCA_DCB_EVT evt_data;
MCA_TRACE_API1 ("MCA_WriteReq: %d ", mdl);
if (p_dcb)
{
if (p_dcb->cong)
{
result = MCA_BUSY;
}
else
{
evt_data.p_pkt = p_pkt;
result = MCA_SUCCESS;
mca_dcb_event(p_dcb, MCA_DCB_API_WRITE_EVT, &evt_data);
}
}
return result;
}
/*******************************************************************************
**
** Function MCA_GetL2CapChannel
**
** Description Get the L2CAP CID used by the given data channel handle.
**
** Returns L2CAP channel ID if successful, otherwise 0.
**
*******************************************************************************/
UINT16 MCA_GetL2CapChannel (tMCA_DL mdl)
{
UINT16 lcid = 0;
tMCA_DCB *p_dcb = mca_dcb_by_hdl(mdl);
MCA_TRACE_API1 ("MCA_GetL2CapChannel: %d ", mdl);
if (p_dcb)
lcid = p_dcb->lcid;
return lcid;
}