/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
* Copyright (C) 2000 Silicon Graphics, Inc.
* Modified for further R[236]000 support by Paul M. Antoine, 1996.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000, 07 MIPS Technologies, Inc.
* Copyright (C) 2003, 2004 Maciej W. Rozycki
*/
#ifndef _ASM_MIPSREGS_H
#define _ASM_MIPSREGS_H
#include <linux/linkage.h>
#include <asm/hazards.h>
#include <asm/war.h>
/*
* The following macros are especially useful for __asm__
* inline assembler.
*/
#ifndef __STR
#define __STR(x) #x
#endif
#ifndef STR
#define STR(x) __STR(x)
#endif
/*
* Configure language
*/
#ifdef __ASSEMBLY__
#define _ULCAST_
#else
#define _ULCAST_ (unsigned long)
#endif
/*
* Coprocessor 0 register names
*/
#define CP0_INDEX $0
#define CP0_RANDOM $1
#define CP0_ENTRYLO0 $2
#define CP0_ENTRYLO1 $3
#define CP0_CONF $3
#define CP0_CONTEXT $4
#define CP0_PAGEMASK $5
#define CP0_WIRED $6
#define CP0_INFO $7
#define CP0_BADVADDR $8
#define CP0_COUNT $9
#define CP0_ENTRYHI $10
#define CP0_COMPARE $11
#define CP0_STATUS $12
#define CP0_CAUSE $13
#define CP0_EPC $14
#define CP0_PRID $15
#define CP0_CONFIG $16
#define CP0_LLADDR $17
#define CP0_WATCHLO $18
#define CP0_WATCHHI $19
#define CP0_XCONTEXT $20
#define CP0_FRAMEMASK $21
#define CP0_DIAGNOSTIC $22
#define CP0_DEBUG $23
#define CP0_DEPC $24
#define CP0_PERFORMANCE $25
#define CP0_ECC $26
#define CP0_CACHEERR $27
#define CP0_TAGLO $28
#define CP0_TAGHI $29
#define CP0_ERROREPC $30
#define CP0_DESAVE $31
/*
* R4640/R4650 cp0 register names. These registers are listed
* here only for completeness; without MMU these CPUs are not useable
* by Linux. A future ELKS port might take make Linux run on them
* though ...
*/
#define CP0_IBASE $0
#define CP0_IBOUND $1
#define CP0_DBASE $2
#define CP0_DBOUND $3
#define CP0_CALG $17
#define CP0_IWATCH $18
#define CP0_DWATCH $19
/*
* Coprocessor 0 Set 1 register names
*/
#define CP0_S1_DERRADDR0 $26
#define CP0_S1_DERRADDR1 $27
#define CP0_S1_INTCONTROL $20
/*
* Coprocessor 0 Set 2 register names
*/
#define CP0_S2_SRSCTL $12 /* MIPSR2 */
/*
* Coprocessor 0 Set 3 register names
*/
#define CP0_S3_SRSMAP $12 /* MIPSR2 */
/*
* TX39 Series
*/
#define CP0_TX39_CACHE $7
/*
* Coprocessor 1 (FPU) register names
*/
#define CP1_REVISION $0
#define CP1_STATUS $31
/*
* FPU Status Register Values
*/
/*
* Status Register Values
*/
#define FPU_CSR_FLUSH 0x01000000 /* flush denormalised results to 0 */
#define FPU_CSR_COND 0x00800000 /* $fcc0 */
#define FPU_CSR_COND0 0x00800000 /* $fcc0 */
#define FPU_CSR_COND1 0x02000000 /* $fcc1 */
#define FPU_CSR_COND2 0x04000000 /* $fcc2 */
#define FPU_CSR_COND3 0x08000000 /* $fcc3 */
#define FPU_CSR_COND4 0x10000000 /* $fcc4 */
#define FPU_CSR_COND5 0x20000000 /* $fcc5 */
#define FPU_CSR_COND6 0x40000000 /* $fcc6 */
#define FPU_CSR_COND7 0x80000000 /* $fcc7 */
/*
* X the exception cause indicator
* E the exception enable
* S the sticky/flag bit
*/
#define FPU_CSR_ALL_X 0x0003f000
#define FPU_CSR_UNI_X 0x00020000
#define FPU_CSR_INV_X 0x00010000
#define FPU_CSR_DIV_X 0x00008000
#define FPU_CSR_OVF_X 0x00004000
#define FPU_CSR_UDF_X 0x00002000
#define FPU_CSR_INE_X 0x00001000
#define FPU_CSR_ALL_E 0x00000f80
#define FPU_CSR_INV_E 0x00000800
#define FPU_CSR_DIV_E 0x00000400
#define FPU_CSR_OVF_E 0x00000200
#define FPU_CSR_UDF_E 0x00000100
#define FPU_CSR_INE_E 0x00000080
#define FPU_CSR_ALL_S 0x0000007c
#define FPU_CSR_INV_S 0x00000040
#define FPU_CSR_DIV_S 0x00000020
#define FPU_CSR_OVF_S 0x00000010
#define FPU_CSR_UDF_S 0x00000008
#define FPU_CSR_INE_S 0x00000004
/* rounding mode */
#define FPU_CSR_RN 0x0 /* nearest */
#define FPU_CSR_RZ 0x1 /* towards zero */
#define FPU_CSR_RU 0x2 /* towards +Infinity */
#define FPU_CSR_RD 0x3 /* towards -Infinity */
/*
* Values for PageMask register
*/
#ifdef CONFIG_CPU_VR41XX
/* Why doesn't stupidity hurt ... */
#define PM_1K 0x00000000
#define PM_4K 0x00001800
#define PM_16K 0x00007800
#define PM_64K 0x0001f800
#define PM_256K 0x0007f800
#else
#define PM_4K 0x00000000
#define PM_16K 0x00006000
#define PM_64K 0x0001e000
#define PM_256K 0x0007e000
#define PM_1M 0x001fe000
#define PM_4M 0x007fe000
#define PM_16M 0x01ffe000
#define PM_64M 0x07ffe000
#define PM_256M 0x1fffe000
#endif
/*
* Default page size for a given kernel configuration
*/
#ifdef CONFIG_PAGE_SIZE_4KB
#define PM_DEFAULT_MASK PM_4K
#elif defined(CONFIG_PAGE_SIZE_16KB)
#define PM_DEFAULT_MASK PM_16K
#elif defined(CONFIG_PAGE_SIZE_64KB)
#define PM_DEFAULT_MASK PM_64K
#else
#error Bad page size configuration!
#endif
/*
* Values used for computation of new tlb entries
*/
#define PL_4K 12
#define PL_16K 14
#define PL_64K 16
#define PL_256K 18
#define PL_1M 20
#define PL_4M 22
#define PL_16M 24
#define PL_64M 26
#define PL_256M 28
/*
* R4x00 interrupt enable / cause bits
*/
#define IE_SW0 (_ULCAST_(1) << 8)
#define IE_SW1 (_ULCAST_(1) << 9)
#define IE_IRQ0 (_ULCAST_(1) << 10)
#define IE_IRQ1 (_ULCAST_(1) << 11)
#define IE_IRQ2 (_ULCAST_(1) << 12)
#define IE_IRQ3 (_ULCAST_(1) << 13)
#define IE_IRQ4 (_ULCAST_(1) << 14)
#define IE_IRQ5 (_ULCAST_(1) << 15)
/*
* R4x00 interrupt cause bits
*/
#define C_SW0 (_ULCAST_(1) << 8)
#define C_SW1 (_ULCAST_(1) << 9)
#define C_IRQ0 (_ULCAST_(1) << 10)
#define C_IRQ1 (_ULCAST_(1) << 11)
#define C_IRQ2 (_ULCAST_(1) << 12)
#define C_IRQ3 (_ULCAST_(1) << 13)
#define C_IRQ4 (_ULCAST_(1) << 14)
#define C_IRQ5 (_ULCAST_(1) << 15)
/*
* Bitfields in the R4xx0 cp0 status register
*/
#define ST0_IE 0x00000001
#define ST0_EXL 0x00000002
#define ST0_ERL 0x00000004
#define ST0_KSU 0x00000018
# define KSU_USER 0x00000010
# define KSU_SUPERVISOR 0x00000008
# define KSU_KERNEL 0x00000000
#define ST0_UX 0x00000020
#define ST0_SX 0x00000040
#define ST0_KX 0x00000080
#define ST0_DE 0x00010000
#define ST0_CE 0x00020000
/*
* Setting c0_status.co enables Hit_Writeback and Hit_Writeback_Invalidate
* cacheops in userspace. This bit exists only on RM7000 and RM9000
* processors.
*/
#define ST0_CO 0x08000000
/*
* Bitfields in the R[23]000 cp0 status register.
*/
#define ST0_IEC 0x00000001
#define ST0_KUC 0x00000002
#define ST0_IEP 0x00000004
#define ST0_KUP 0x00000008
#define ST0_IEO 0x00000010
#define ST0_KUO 0x00000020
/* bits 6 & 7 are reserved on R[23]000 */
#define ST0_ISC 0x00010000
#define ST0_SWC 0x00020000
#define ST0_CM 0x00080000
/*
* Bits specific to the R4640/R4650
*/
#define ST0_UM (_ULCAST_(1) << 4)
#define ST0_IL (_ULCAST_(1) << 23)
#define ST0_DL (_ULCAST_(1) << 24)
/*
* Enable the MIPS MDMX and DSP ASEs
*/
#define ST0_MX 0x01000000
/*
* Bitfields in the TX39 family CP0 Configuration Register 3
*/
#define TX39_CONF_ICS_SHIFT 19
#define TX39_CONF_ICS_MASK 0x00380000
#define TX39_CONF_ICS_1KB 0x00000000
#define TX39_CONF_ICS_2KB 0x00080000
#define TX39_CONF_ICS_4KB 0x00100000
#define TX39_CONF_ICS_8KB 0x00180000
#define TX39_CONF_ICS_16KB 0x00200000
#define TX39_CONF_DCS_SHIFT 16
#define TX39_CONF_DCS_MASK 0x00070000
#define TX39_CONF_DCS_1KB 0x00000000
#define TX39_CONF_DCS_2KB 0x00010000
#define TX39_CONF_DCS_4KB 0x00020000
#define TX39_CONF_DCS_8KB 0x00030000
#define TX39_CONF_DCS_16KB 0x00040000
#define TX39_CONF_CWFON 0x00004000
#define TX39_CONF_WBON 0x00002000
#define TX39_CONF_RF_SHIFT 10
#define TX39_CONF_RF_MASK 0x00000c00
#define TX39_CONF_DOZE 0x00000200
#define TX39_CONF_HALT 0x00000100
#define TX39_CONF_LOCK 0x00000080
#define TX39_CONF_ICE 0x00000020
#define TX39_CONF_DCE 0x00000010
#define TX39_CONF_IRSIZE_SHIFT 2
#define TX39_CONF_IRSIZE_MASK 0x0000000c
#define TX39_CONF_DRSIZE_SHIFT 0
#define TX39_CONF_DRSIZE_MASK 0x00000003
/*
* Status register bits available in all MIPS CPUs.
*/
#define ST0_IM 0x0000ff00
#define STATUSB_IP0 8
#define STATUSF_IP0 (_ULCAST_(1) << 8)
#define STATUSB_IP1 9
#define STATUSF_IP1 (_ULCAST_(1) << 9)
#define STATUSB_IP2 10
#define STATUSF_IP2 (_ULCAST_(1) << 10)
#define STATUSB_IP3 11
#define STATUSF_IP3 (_ULCAST_(1) << 11)
#define STATUSB_IP4 12
#define STATUSF_IP4 (_ULCAST_(1) << 12)
#define STATUSB_IP5 13
#define STATUSF_IP5 (_ULCAST_(1) << 13)
#define STATUSB_IP6 14
#define STATUSF_IP6 (_ULCAST_(1) << 14)
#define STATUSB_IP7 15
#define STATUSF_IP7 (_ULCAST_(1) << 15)
#define STATUSB_IP8 0
#define STATUSF_IP8 (_ULCAST_(1) << 0)
#define STATUSB_IP9 1
#define STATUSF_IP9 (_ULCAST_(1) << 1)
#define STATUSB_IP10 2
#define STATUSF_IP10 (_ULCAST_(1) << 2)
#define STATUSB_IP11 3
#define STATUSF_IP11 (_ULCAST_(1) << 3)
#define STATUSB_IP12 4
#define STATUSF_IP12 (_ULCAST_(1) << 4)
#define STATUSB_IP13 5
#define STATUSF_IP13 (_ULCAST_(1) << 5)
#define STATUSB_IP14 6
#define STATUSF_IP14 (_ULCAST_(1) << 6)
#define STATUSB_IP15 7
#define STATUSF_IP15 (_ULCAST_(1) << 7)
#define ST0_CH 0x00040000
#define ST0_SR 0x00100000
#define ST0_TS 0x00200000
#define ST0_BEV 0x00400000
#define ST0_RE 0x02000000
#define ST0_FR 0x04000000
#define ST0_CU 0xf0000000
#define ST0_CU0 0x10000000
#define ST0_CU1 0x20000000
#define ST0_CU2 0x40000000
#define ST0_CU3 0x80000000
#define ST0_XX 0x80000000 /* MIPS IV naming */
/*
* Bitfields and bit numbers in the coprocessor 0 cause register.
*
* Refer to your MIPS R4xx0 manual, chapter 5 for explanation.
*/
#define CAUSEB_EXCCODE 2
#define CAUSEF_EXCCODE (_ULCAST_(31) << 2)
#define CAUSEB_IP 8
#define CAUSEF_IP (_ULCAST_(255) << 8)
#define CAUSEB_IP0 8
#define CAUSEF_IP0 (_ULCAST_(1) << 8)
#define CAUSEB_IP1 9
#define CAUSEF_IP1 (_ULCAST_(1) << 9)
#define CAUSEB_IP2 10
#define CAUSEF_IP2 (_ULCAST_(1) << 10)
#define CAUSEB_IP3 11
#define CAUSEF_IP3 (_ULCAST_(1) << 11)
#define CAUSEB_IP4 12
#define CAUSEF_IP4 (_ULCAST_(1) << 12)
#define CAUSEB_IP5 13
#define CAUSEF_IP5 (_ULCAST_(1) << 13)
#define CAUSEB_IP6 14
#define CAUSEF_IP6 (_ULCAST_(1) << 14)
#define CAUSEB_IP7 15
#define CAUSEF_IP7 (_ULCAST_(1) << 15)
#define CAUSEB_IV 23
#define CAUSEF_IV (_ULCAST_(1) << 23)
#define CAUSEB_CE 28
#define CAUSEF_CE (_ULCAST_(3) << 28)
#define CAUSEB_BD 31
#define CAUSEF_BD (_ULCAST_(1) << 31)
/*
* Bits in the coprocessor 0 config register.
*/
/* Generic bits. */
#define CONF_CM_CACHABLE_NO_WA 0
#define CONF_CM_CACHABLE_WA 1
#define CONF_CM_UNCACHED 2
#define CONF_CM_CACHABLE_NONCOHERENT 3
#define CONF_CM_CACHABLE_CE 4
#define CONF_CM_CACHABLE_COW 5
#define CONF_CM_CACHABLE_CUW 6
#define CONF_CM_CACHABLE_ACCELERATED 7
#define CONF_CM_CMASK 7
#define CONF_BE (_ULCAST_(1) << 15)
/* Bits common to various processors. */
#define CONF_CU (_ULCAST_(1) << 3)
#define CONF_DB (_ULCAST_(1) << 4)
#define CONF_IB (_ULCAST_(1) << 5)
#define CONF_DC (_ULCAST_(7) << 6)
#define CONF_IC (_ULCAST_(7) << 9)
#define CONF_EB (_ULCAST_(1) << 13)
#define CONF_EM (_ULCAST_(1) << 14)
#define CONF_SM (_ULCAST_(1) << 16)
#define CONF_SC (_ULCAST_(1) << 17)
#define CONF_EW (_ULCAST_(3) << 18)
#define CONF_EP (_ULCAST_(15)<< 24)
#define CONF_EC (_ULCAST_(7) << 28)
#define CONF_CM (_ULCAST_(1) << 31)
/* Bits specific to the R4xx0. */
#define R4K_CONF_SW (_ULCAST_(1) << 20)
#define R4K_CONF_SS (_ULCAST_(1) << 21)
#define R4K_CONF_SB (_ULCAST_(3) << 22)
/* Bits specific to the R5000. */
#define R5K_CONF_SE (_ULCAST_(1) << 12)
#define R5K_CONF_SS (_ULCAST_(3) << 20)
/* Bits specific to the RM7000. */
#define RM7K_CONF_SE (_ULCAST_(1) << 3)
#define RM7K_CONF_TE (_ULCAST_(1) << 12)
#define RM7K_CONF_CLK (_ULCAST_(1) << 16)
#define RM7K_CONF_TC (_ULCAST_(1) << 17)
#define RM7K_CONF_SI (_ULCAST_(3) << 20)
#define RM7K_CONF_SC (_ULCAST_(1) << 31)
/* Bits specific to the R10000. */
#define R10K_CONF_DN (_ULCAST_(3) << 3)
#define R10K_CONF_CT (_ULCAST_(1) << 5)
#define R10K_CONF_PE (_ULCAST_(1) << 6)
#define R10K_CONF_PM (_ULCAST_(3) << 7)
#define R10K_CONF_EC (_ULCAST_(15)<< 9)
#define R10K_CONF_SB (_ULCAST_(1) << 13)
#define R10K_CONF_SK (_ULCAST_(1) << 14)
#define R10K_CONF_SS (_ULCAST_(7) << 16)
#define R10K_CONF_SC (_ULCAST_(7) << 19)
#define R10K_CONF_DC (_ULCAST_(7) << 26)
#define R10K_CONF_IC (_ULCAST_(7) << 29)
/* Bits specific to the VR41xx. */
#define VR41_CONF_CS (_ULCAST_(1) << 12)
#define VR41_CONF_P4K (_ULCAST_(1) << 13)
#define VR41_CONF_BP (_ULCAST_(1) << 16)
#define VR41_CONF_M16 (_ULCAST_(1) << 20)
#define VR41_CONF_AD (_ULCAST_(1) << 23)
/* Bits specific to the R30xx. */
#define R30XX_CONF_FDM (_ULCAST_(1) << 19)
#define R30XX_CONF_REV (_ULCAST_(1) << 22)
#define R30XX_CONF_AC (_ULCAST_(1) << 23)
#define R30XX_CONF_RF (_ULCAST_(1) << 24)
#define R30XX_CONF_HALT (_ULCAST_(1) << 25)
#define R30XX_CONF_FPINT (_ULCAST_(7) << 26)
#define R30XX_CONF_DBR (_ULCAST_(1) << 29)
#define R30XX_CONF_SB (_ULCAST_(1) << 30)
#define R30XX_CONF_LOCK (_ULCAST_(1) << 31)
/* Bits specific to the TX49. */
#define TX49_CONF_DC (_ULCAST_(1) << 16)
#define TX49_CONF_IC (_ULCAST_(1) << 17) /* conflict with CONF_SC */
#define TX49_CONF_HALT (_ULCAST_(1) << 18)
#define TX49_CONF_CWFON (_ULCAST_(1) << 27)
/* Bits specific to the MIPS32/64 PRA. */
#define MIPS_CONF_MT (_ULCAST_(7) << 7)
#define MIPS_CONF_AR (_ULCAST_(7) << 10)
#define MIPS_CONF_AT (_ULCAST_(3) << 13)
#define MIPS_CONF_M (_ULCAST_(1) << 31)
/*
* Bits in the MIPS32/64 PRA coprocessor 0 config registers 1 and above.
*/
#define MIPS_CONF1_FP (_ULCAST_(1) << 0)
#define MIPS_CONF1_EP (_ULCAST_(1) << 1)
#define MIPS_CONF1_CA (_ULCAST_(1) << 2)
#define MIPS_CONF1_WR (_ULCAST_(1) << 3)
#define MIPS_CONF1_PC (_ULCAST_(1) << 4)
#define MIPS_CONF1_MD (_ULCAST_(1) << 5)
#define MIPS_CONF1_C2 (_ULCAST_(1) << 6)
#define MIPS_CONF1_DA (_ULCAST_(7) << 7)
#define MIPS_CONF1_DL (_ULCAST_(7) << 10)
#define MIPS_CONF1_DS (_ULCAST_(7) << 13)
#define MIPS_CONF1_IA (_ULCAST_(7) << 16)
#define MIPS_CONF1_IL (_ULCAST_(7) << 19)
#define MIPS_CONF1_IS (_ULCAST_(7) << 22)
#define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25)
#define MIPS_CONF2_SA (_ULCAST_(15)<< 0)
#define MIPS_CONF2_SL (_ULCAST_(15)<< 4)
#define MIPS_CONF2_SS (_ULCAST_(15)<< 8)
#define MIPS_CONF2_SU (_ULCAST_(15)<< 12)
#define MIPS_CONF2_TA (_ULCAST_(15)<< 16)
#define MIPS_CONF2_TL (_ULCAST_(15)<< 20)
#define MIPS_CONF2_TS (_ULCAST_(15)<< 24)
#define MIPS_CONF2_TU (_ULCAST_(7) << 28)
#define MIPS_CONF3_TL (_ULCAST_(1) << 0)
#define MIPS_CONF3_SM (_ULCAST_(1) << 1)
#define MIPS_CONF3_MT (_ULCAST_(1) << 2)
#define MIPS_CONF3_SP (_ULCAST_(1) << 4)
#define MIPS_CONF3_VINT (_ULCAST_(1) << 5)
#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
/*
* Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
*/
#define MIPS_FPIR_S (_ULCAST_(1) << 16)
#define MIPS_FPIR_D (_ULCAST_(1) << 17)
#define MIPS_FPIR_PS (_ULCAST_(1) << 18)
#define MIPS_FPIR_3D (_ULCAST_(1) << 19)
#define MIPS_FPIR_W (_ULCAST_(1) << 20)
#define MIPS_FPIR_L (_ULCAST_(1) << 21)
#define MIPS_FPIR_F64 (_ULCAST_(1) << 22)
#ifndef __ASSEMBLY__
/*
* Functions to access the R10000 performance counters. These are basically
* mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
* performance counter number encoded into bits 1 ... 5 of the instruction.
* Only performance counters 0 to 1 actually exist, so for a non-R10000 aware
* disassembler these will look like an access to sel 0 or 1.
*/
#define read_r10k_perf_cntr(counter) \
({ \
unsigned int __res; \
__asm__ __volatile__( \
"mfpc\t%0, %1" \
: "=r" (__res) \
: "i" (counter)); \
\
__res; \
})
#define write_r10k_perf_cntr(counter,val) \
do { \
__asm__ __volatile__( \
"mtpc\t%0, %1" \
: \
: "r" (val), "i" (counter)); \
} while (0)
#define read_r10k_perf_event(counter) \
({ \
unsigned int __res; \
__asm__ __volatile__( \
"mfps\t%0, %1" \
: "=r" (__res) \
: "i" (counter)); \
\
__res; \
})
#define write_r10k_perf_cntl(counter,val) \
do { \
__asm__ __volatile__( \
"mtps\t%0, %1" \
: \
: "r" (val), "i" (counter)); \
} while (0)
/*
* Macros to access the system control coprocessor
*/
#define __read_32bit_c0_register(source, sel) \
({ int __res; \
if (sel == 0) \
__asm__ __volatile__( \
"mfc0\t%0, " #source "\n\t" \
: "=r" (__res)); \
else \
__asm__ __volatile__( \
".set\tmips32\n\t" \
"mfc0\t%0, " #source ", " #sel "\n\t" \
".set\tmips0\n\t" \
: "=r" (__res)); \
__res; \
})
#define __read_64bit_c0_register(source, sel) \
({ unsigned long long __res; \
if (sizeof(unsigned long) == 4) \
__res = __read_64bit_c0_split(source, sel); \
else if (sel == 0) \
__asm__ __volatile__( \
".set\tmips3\n\t" \
"dmfc0\t%0, " #source "\n\t" \
".set\tmips0" \
: "=r" (__res)); \
else \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dmfc0\t%0, " #source ", " #sel "\n\t" \
".set\tmips0" \
: "=r" (__res)); \
__res; \
})
#define __write_32bit_c0_register(register, sel, value) \
do { \
if (sel == 0) \
__asm__ __volatile__( \
"mtc0\t%z0, " #register "\n\t" \
: : "Jr" ((unsigned int)(value))); \
else \
__asm__ __volatile__( \
".set\tmips32\n\t" \
"mtc0\t%z0, " #register ", " #sel "\n\t" \
".set\tmips0" \
: : "Jr" ((unsigned int)(value))); \
} while (0)
#define __write_64bit_c0_register(register, sel, value) \
do { \
if (sizeof(unsigned long) == 4) \
__write_64bit_c0_split(register, sel, value); \
else if (sel == 0) \
__asm__ __volatile__( \
".set\tmips3\n\t" \
"dmtc0\t%z0, " #register "\n\t" \
".set\tmips0" \
: : "Jr" (value)); \
else \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dmtc0\t%z0, " #register ", " #sel "\n\t" \
".set\tmips0" \
: : "Jr" (value)); \
} while (0)
#define __read_ulong_c0_register(reg, sel) \
((sizeof(unsigned long) == 4) ? \
(unsigned long) __read_32bit_c0_register(reg, sel) : \
(unsigned long) __read_64bit_c0_register(reg, sel))
#define __write_ulong_c0_register(reg, sel, val) \
do { \
if (sizeof(unsigned long) == 4) \
__write_32bit_c0_register(reg, sel, val); \
else \
__write_64bit_c0_register(reg, sel, val); \
} while (0)
/*
* On RM7000/RM9000 these are uses to access cop0 set 1 registers
*/
#define __read_32bit_c0_ctrl_register(source) \
({ int __res; \
__asm__ __volatile__( \
"cfc0\t%0, " #source "\n\t" \
: "=r" (__res)); \
__res; \
})
#define __write_32bit_c0_ctrl_register(register, value) \
do { \
__asm__ __volatile__( \
"ctc0\t%z0, " #register "\n\t" \
: : "Jr" ((unsigned int)(value))); \
} while (0)
/*
* These versions are only needed for systems with more than 38 bits of
* physical address space running the 32-bit kernel. That's none atm :-)
*/
#define __read_64bit_c0_split(source, sel) \
({ \
unsigned long long __val; \
unsigned long __flags; \
\
local_irq_save(__flags); \
if (sel == 0) \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
"dsrl\t%M0, %M0, 32\n\t" \
"dsrl\t%L0, %L0, 32\n\t" \
".set\tmips0" \
: "=r" (__val)); \
else \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source ", " #sel "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
"dsrl\t%M0, %M0, 32\n\t" \
"dsrl\t%L0, %L0, 32\n\t" \
".set\tmips0" \
: "=r" (__val)); \
local_irq_restore(__flags); \
\
__val; \
})
#define __write_64bit_c0_split(source, sel, val) \
do { \
unsigned long __flags; \
\
local_irq_save(__flags); \
if (sel == 0) \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dsll\t%L0, %L0, 32\n\t" \
"dsrl\t%L0, %L0, 32\n\t" \
"dsll\t%M0, %M0, 32\n\t" \
"or\t%L0, %L0, %M0\n\t" \
"dmtc0\t%L0, " #source "\n\t" \
".set\tmips0" \
: : "r" (val)); \
else \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dsll\t%L0, %L0, 32\n\t" \
"dsrl\t%L0, %L0, 32\n\t" \
"dsll\t%M0, %M0, 32\n\t" \
"or\t%L0, %L0, %M0\n\t" \
"dmtc0\t%L0, " #source ", " #sel "\n\t" \
".set\tmips0" \
: : "r" (val)); \
local_irq_restore(__flags); \
} while (0)
#define read_c0_index() __read_32bit_c0_register($0, 0)
#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
#define read_c0_random() __read_32bit_c0_register($1, 0)
#define write_c0_random(val) __write_32bit_c0_register($1, 0, val)
#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
#define read_c0_entrylo1() __read_ulong_c0_register($3, 0)
#define write_c0_entrylo1(val) __write_ulong_c0_register($3, 0, val)
#define read_c0_conf() __read_32bit_c0_register($3, 0)
#define write_c0_conf(val) __write_32bit_c0_register($3, 0, val)
#define read_c0_context() __read_ulong_c0_register($4, 0)
#define write_c0_context(val) __write_ulong_c0_register($4, 0, val)
#define read_c0_userlocal() __read_ulong_c0_register($4, 2)
#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val)
#define read_c0_pagemask() __read_32bit_c0_register($5, 0)
#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val)
#define read_c0_wired() __read_32bit_c0_register($6, 0)
#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val)
#define read_c0_info() __read_32bit_c0_register($7, 0)
#define read_c0_cache() __read_32bit_c0_register($7, 0) /* TX39xx */
#define write_c0_cache(val) __write_32bit_c0_register($7, 0, val)
#define read_c0_badvaddr() __read_ulong_c0_register($8, 0)
#define write_c0_badvaddr(val) __write_ulong_c0_register($8, 0, val)
#define read_c0_count() __read_32bit_c0_register($9, 0)
#define write_c0_count(val) __write_32bit_c0_register($9, 0, val)
#define read_c0_count2() __read_32bit_c0_register($9, 6) /* pnx8550 */
#define write_c0_count2(val) __write_32bit_c0_register($9, 6, val)
#define read_c0_count3() __read_32bit_c0_register($9, 7) /* pnx8550 */
#define write_c0_count3(val) __write_32bit_c0_register($9, 7, val)
#define read_c0_entryhi() __read_ulong_c0_register($10, 0)
#define write_c0_entryhi(val) __write_ulong_c0_register($10, 0, val)
#define read_c0_compare() __read_32bit_c0_register($11, 0)
#define write_c0_compare(val) __write_32bit_c0_register($11, 0, val)
#define read_c0_compare2() __read_32bit_c0_register($11, 6) /* pnx8550 */
#define write_c0_compare2(val) __write_32bit_c0_register($11, 6, val)
#define read_c0_compare3() __read_32bit_c0_register($11, 7) /* pnx8550 */
#define write_c0_compare3(val) __write_32bit_c0_register($11, 7, val)
#define read_c0_status() __read_32bit_c0_register($12, 0)
#ifdef CONFIG_MIPS_MT_SMTC
#define write_c0_status(val) \
do { \
__write_32bit_c0_register($12, 0, val); \
__ehb(); \
} while (0)
#else
/*
* Legacy non-SMTC code, which may be hazardous
* but which might not support EHB
*/
#define write_c0_status(val) __write_32bit_c0_register($12, 0, val)
#endif /* CONFIG_MIPS_MT_SMTC */
#define read_c0_cause() __read_32bit_c0_register($13, 0)
#define write_c0_cause(val) __write_32bit_c0_register($13, 0, val)
#define read_c0_epc() __read_ulong_c0_register($14, 0)
#define write_c0_epc(val) __write_ulong_c0_register($14, 0, val)
#define read_c0_prid() __read_32bit_c0_register($15, 0)
#define read_c0_config() __read_32bit_c0_register($16, 0)
#define read_c0_config1() __read_32bit_c0_register($16, 1)
#define read_c0_config2() __read_32bit_c0_register($16, 2)
#define read_c0_config3() __read_32bit_c0_register($16, 3)
#define read_c0_config4() __read_32bit_c0_register($16, 4)
#define read_c0_config5() __read_32bit_c0_register($16, 5)
#define read_c0_config6() __read_32bit_c0_register($16, 6)
#define read_c0_config7() __read_32bit_c0_register($16, 7)
#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
/*
* The WatchLo register. There may be upto 8 of them.
*/
#define read_c0_watchlo0() __read_ulong_c0_register($18, 0)
#define read_c0_watchlo1() __read_ulong_c0_register($18, 1)
#define read_c0_watchlo2() __read_ulong_c0_register($18, 2)
#define read_c0_watchlo3() __read_ulong_c0_register($18, 3)
#define read_c0_watchlo4() __read_ulong_c0_register($18, 4)
#define read_c0_watchlo5() __read_ulong_c0_register($18, 5)
#define read_c0_watchlo6() __read_ulong_c0_register($18, 6)
#define read_c0_watchlo7() __read_ulong_c0_register($18, 7)
#define write_c0_watchlo0(val) __write_ulong_c0_register($18, 0, val)
#define write_c0_watchlo1(val) __write_ulong_c0_register($18, 1, val)
#define write_c0_watchlo2(val) __write_ulong_c0_register($18, 2, val)
#define write_c0_watchlo3(val) __write_ulong_c0_register($18, 3, val)
#define write_c0_watchlo4(val) __write_ulong_c0_register($18, 4, val)
#define write_c0_watchlo5(val) __write_ulong_c0_register($18, 5, val)
#define write_c0_watchlo6(val) __write_ulong_c0_register($18, 6, val)
#define write_c0_watchlo7(val) __write_ulong_c0_register($18, 7, val)
/*
* The WatchHi register. There may be upto 8 of them.
*/
#define read_c0_watchhi0() __read_32bit_c0_register($19, 0)
#define read_c0_watchhi1() __read_32bit_c0_register($19, 1)
#define read_c0_watchhi2() __read_32bit_c0_register($19, 2)
#define read_c0_watchhi3() __read_32bit_c0_register($19, 3)
#define read_c0_watchhi4() __read_32bit_c0_register($19, 4)
#define read_c0_watchhi5() __read_32bit_c0_register($19, 5)
#define read_c0_watchhi6() __read_32bit_c0_register($19, 6)
#define read_c0_watchhi7() __read_32bit_c0_register($19, 7)
#define write_c0_watchhi0(val) __write_32bit_c0_register($19, 0, val)
#define write_c0_watchhi1(val) __write_32bit_c0_register($19, 1, val)
#define write_c0_watchhi2(val) __write_32bit_c0_register($19, 2, val)
#define write_c0_watchhi3(val) __write_32bit_c0_register($19, 3, val)
#define write_c0_watchhi4(val) __write_32bit_c0_register($19, 4, val)
#define write_c0_watchhi5(val) __write_32bit_c0_register($19, 5, val)
#define write_c0_watchhi6(val) __write_32bit_c0_register($19, 6, val)
#define write_c0_watchhi7(val) __write_32bit_c0_register($19, 7, val)
#define read_c0_xcontext() __read_ulong_c0_register($20, 0)
#define write_c0_xcontext(val) __write_ulong_c0_register($20, 0, val)
#define read_c0_intcontrol() __read_32bit_c0_ctrl_register($20)
#define write_c0_intcontrol(val) __write_32bit_c0_ctrl_register($20, val)
#define read_c0_framemask() __read_32bit_c0_register($21, 0)
#define write_c0_framemask(val) __write_32bit_c0_register($21, 0, val)
/* RM9000 PerfControl performance counter control register */
#define read_c0_perfcontrol() __read_32bit_c0_register($22, 0)
#define write_c0_perfcontrol(val) __write_32bit_c0_register($22, 0, val)
#define read_c0_diag() __read_32bit_c0_register($22, 0)
#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val)
#define read_c0_diag1() __read_32bit_c0_register($22, 1)
#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val)
#define read_c0_diag2() __read_32bit_c0_register($22, 2)
#define write_c0_diag2(val) __write_32bit_c0_register($22, 2, val)
#define read_c0_diag3() __read_32bit_c0_register($22, 3)
#define write_c0_diag3(val) __write_32bit_c0_register($22, 3, val)
#define read_c0_diag4() __read_32bit_c0_register($22, 4)
#define write_c0_diag4(val) __write_32bit_c0_register($22, 4, val)
#define read_c0_diag5() __read_32bit_c0_register($22, 5)
#define write_c0_diag5(val) __write_32bit_c0_register($22, 5, val)
#define read_c0_debug() __read_32bit_c0_register($23, 0)
#define write_c0_debug(val) __write_32bit_c0_register($23, 0, val)
#define read_c0_depc() __read_ulong_c0_register($24, 0)
#define write_c0_depc(val) __write_ulong_c0_register($24, 0, val)
/*
* MIPS32 / MIPS64 performance counters
*/
#define read_c0_perfctrl0() __read_32bit_c0_register($25, 0)
#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1)
#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2)
#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3)
#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4)
#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5)
#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6)
#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7)
#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
/* RM9000 PerfCount performance counter register */
#define read_c0_perfcount() __read_64bit_c0_register($25, 0)
#define write_c0_perfcount(val) __write_64bit_c0_register($25, 0, val)
#define read_c0_ecc() __read_32bit_c0_register($26, 0)
#define write_c0_ecc(val) __write_32bit_c0_register($26, 0, val)
#define read_c0_derraddr0() __read_ulong_c0_register($26, 1)
#define write_c0_derraddr0(val) __write_ulong_c0_register($26, 1, val)
#define read_c0_cacheerr() __read_32bit_c0_register($27, 0)
#define read_c0_derraddr1() __read_ulong_c0_register($27, 1)
#define write_c0_derraddr1(val) __write_ulong_c0_register($27, 1, val)
#define read_c0_taglo() __read_32bit_c0_register($28, 0)
#define write_c0_taglo(val) __write_32bit_c0_register($28, 0, val)
#define read_c0_dtaglo() __read_32bit_c0_register($28, 2)
#define write_c0_dtaglo(val) __write_32bit_c0_register($28, 2, val)
#define read_c0_taghi() __read_32bit_c0_register($29, 0)
#define write_c0_taghi(val) __write_32bit_c0_register($29, 0, val)
#define read_c0_errorepc() __read_ulong_c0_register($30, 0)
#define write_c0_errorepc(val) __write_ulong_c0_register($30, 0, val)
/* MIPSR2 */
#define read_c0_hwrena() __read_32bit_c0_register($7, 0)
#define write_c0_hwrena(val) __write_32bit_c0_register($7, 0, val)
#define read_c0_intctl() __read_32bit_c0_register($12, 1)
#define write_c0_intctl(val) __write_32bit_c0_register($12, 1, val)
#define read_c0_srsctl() __read_32bit_c0_register($12, 2)
#define write_c0_srsctl(val) __write_32bit_c0_register($12, 2, val)
#define read_c0_srsmap() __read_32bit_c0_register($12, 3)
#define write_c0_srsmap(val) __write_32bit_c0_register($12, 3, val)
#define read_c0_ebase() __read_32bit_c0_register($15, 1)
#define write_c0_ebase(val) __write_32bit_c0_register($15, 1, val)
/*
* Macros to access the floating point coprocessor control registers
*/
#define read_32bit_cp1_register(source) \
({ int __res; \
__asm__ __volatile__( \
".set\tpush\n\t" \
".set\treorder\n\t" \
"cfc1\t%0,"STR(source)"\n\t" \
".set\tpop" \
: "=r" (__res)); \
__res;})
#define rddsp(mask) \
({ \
unsigned int __res; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" # rddsp $1, %x1 \n" \
" .word 0x7c000cb8 | (%x1 << 16) \n" \
" move %0, $1 \n" \
" .set pop \n" \
: "=r" (__res) \
: "i" (mask)); \
__res; \
})
#define wrdsp(val, mask) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" move $1, %0 \n" \
" # wrdsp $1, %x1 \n" \
" .word 0x7c2004f8 | (%x1 << 11) \n" \
" .set pop \n" \
: \
: "r" (val), "i" (mask)); \
} while (0)
#if 0 /* Need DSP ASE capable assembler ... */
#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
#else
#define mfhi0() \
({ \
unsigned long __treg; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" # mfhi %0, $ac0 \n" \
" .word 0x00000810 \n" \
" move %0, $1 \n" \
" .set pop \n" \
: "=r" (__treg)); \
__treg; \
})
#define mfhi1() \
({ \
unsigned long __treg; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" # mfhi %0, $ac1 \n" \
" .word 0x00200810 \n" \
" move %0, $1 \n" \
" .set pop \n" \
: "=r" (__treg)); \
__treg; \
})
#define mfhi2() \
({ \
unsigned long __treg; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" # mfhi %0, $ac2 \n" \
" .word 0x00400810 \n" \
" move %0, $1 \n" \
" .set pop \n" \
: "=r" (__treg)); \
__treg; \
})
#define mfhi3() \
({ \
unsigned long __treg; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" # mfhi %0, $ac3 \n" \
" .word 0x00600810 \n" \
" move %0, $1 \n" \
" .set pop \n" \
: "=r" (__treg)); \
__treg; \
})
#define mflo0() \
({ \
unsigned long __treg; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" # mflo %0, $ac0 \n" \
" .word 0x00000812 \n" \
" move %0, $1 \n" \
" .set pop \n" \
: "=r" (__treg)); \
__treg; \
})
#define mflo1() \
({ \
unsigned long __treg; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" # mflo %0, $ac1 \n" \
" .word 0x00200812 \n" \
" move %0, $1 \n" \
" .set pop \n" \
: "=r" (__treg)); \
__treg; \
})
#define mflo2() \
({ \
unsigned long __treg; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" # mflo %0, $ac2 \n" \
" .word 0x00400812 \n" \
" move %0, $1 \n" \
" .set pop \n" \
: "=r" (__treg)); \
__treg; \
})
#define mflo3() \
({ \
unsigned long __treg; \
\
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" # mflo %0, $ac3 \n" \
" .word 0x00600812 \n" \
" move %0, $1 \n" \
" .set pop \n" \
: "=r" (__treg)); \
__treg; \
})
#define mthi0(x) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" move $1, %0 \n" \
" # mthi $1, $ac0 \n" \
" .word 0x00200011 \n" \
" .set pop \n" \
: \
: "r" (x)); \
} while (0)
#define mthi1(x) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" move $1, %0 \n" \
" # mthi $1, $ac1 \n" \
" .word 0x00200811 \n" \
" .set pop \n" \
: \
: "r" (x)); \
} while (0)
#define mthi2(x) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" move $1, %0 \n" \
" # mthi $1, $ac2 \n" \
" .word 0x00201011 \n" \
" .set pop \n" \
: \
: "r" (x)); \
} while (0)
#define mthi3(x) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" move $1, %0 \n" \
" # mthi $1, $ac3 \n" \
" .word 0x00201811 \n" \
" .set pop \n" \
: \
: "r" (x)); \
} while (0)
#define mtlo0(x) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" move $1, %0 \n" \
" # mtlo $1, $ac0 \n" \
" .word 0x00200013 \n" \
" .set pop \n" \
: \
: "r" (x)); \
} while (0)
#define mtlo1(x) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" move $1, %0 \n" \
" # mtlo $1, $ac1 \n" \
" .word 0x00200813 \n" \
" .set pop \n" \
: \
: "r" (x)); \
} while (0)
#define mtlo2(x) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" move $1, %0 \n" \
" # mtlo $1, $ac2 \n" \
" .word 0x00201013 \n" \
" .set pop \n" \
: \
: "r" (x)); \
} while (0)
#define mtlo3(x) \
do { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
" move $1, %0 \n" \
" # mtlo $1, $ac3 \n" \
" .word 0x00201813 \n" \
" .set pop \n" \
: \
: "r" (x)); \
} while (0)
#endif
/*
* TLB operations.
*
* It is responsibility of the caller to take care of any TLB hazards.
*/
static inline void tlb_probe(void)
{
__asm__ __volatile__(
".set noreorder\n\t"
"tlbp\n\t"
".set reorder");
}
static inline void tlb_read(void)
{
#if MIPS34K_MISSED_ITLB_WAR
int res = 0;
__asm__ __volatile__(
" .set push \n"
" .set noreorder \n"
" .set noat \n"
" .set mips32r2 \n"
" .word 0x41610001 # dvpe $1 \n"
" move %0, $1 \n"
" ehb \n"
" .set pop \n"
: "=r" (res));
instruction_hazard();
#endif
__asm__ __volatile__(
".set noreorder\n\t"
"tlbr\n\t"
".set reorder");
#if MIPS34K_MISSED_ITLB_WAR
if ((res & _ULCAST_(1)))
__asm__ __volatile__(
" .set push \n"
" .set noreorder \n"
" .set noat \n"
" .set mips32r2 \n"
" .word 0x41600021 # evpe \n"
" ehb \n"
" .set pop \n");
#endif
}
static inline void tlb_write_indexed(void)
{
__asm__ __volatile__(
".set noreorder\n\t"
"tlbwi\n\t"
".set reorder");
}
static inline void tlb_write_random(void)
{
__asm__ __volatile__(
".set noreorder\n\t"
"tlbwr\n\t"
".set reorder");
}
/*
* Manipulate bits in a c0 register.
*/
#ifndef CONFIG_MIPS_MT_SMTC
/*
* SMTC Linux requires shutting-down microthread scheduling
* during CP0 register read-modify-write sequences.
*/
#define __BUILD_SET_C0(name) \
static inline unsigned int \
set_c0_##name(unsigned int set) \
{ \
unsigned int res; \
\
res = read_c0_##name(); \
res |= set; \
write_c0_##name(res); \
\
return res; \
} \
\
static inline unsigned int \
clear_c0_##name(unsigned int clear) \
{ \
unsigned int res; \
\
res = read_c0_##name(); \
res &= ~clear; \
write_c0_##name(res); \
\
return res; \
} \
\
static inline unsigned int \
change_c0_##name(unsigned int change, unsigned int new) \
{ \
unsigned int res; \
\
res = read_c0_##name(); \
res &= ~change; \
res |= (new & change); \
write_c0_##name(res); \
\
return res; \
}
#else /* SMTC versions that manage MT scheduling */
#include <linux/irqflags.h>
/*
* This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
* header file recursion.
*/
static inline unsigned int __dmt(void)
{
int res;
__asm__ __volatile__(
" .set push \n"
" .set mips32r2 \n"
" .set noat \n"
" .word 0x41610BC1 # dmt $1 \n"
" ehb \n"
" move %0, $1 \n"
" .set pop \n"
: "=r" (res));
instruction_hazard();
return res;
}
#define __VPECONTROL_TE_SHIFT 15
#define __VPECONTROL_TE (1UL << __VPECONTROL_TE_SHIFT)
#define __EMT_ENABLE __VPECONTROL_TE
static inline void __emt(unsigned int previous)
{
if ((previous & __EMT_ENABLE))
__asm__ __volatile__(
" .set mips32r2 \n"
" .word 0x41600be1 # emt \n"
" ehb \n"
" .set mips0 \n");
}
static inline void __ehb(void)
{
__asm__ __volatile__(
" .set mips32r2 \n"
" ehb \n" " .set mips0 \n");
}
/*
* Note that local_irq_save/restore affect TC-specific IXMT state,
* not Status.IE as in non-SMTC kernel.
*/
#define __BUILD_SET_C0(name) \
static inline unsigned int \
set_c0_##name(unsigned int set) \
{ \
unsigned int res; \
unsigned int omt; \
unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
res = read_c0_##name(); \
res |= set; \
write_c0_##name(res); \
__emt(omt); \
local_irq_restore(flags); \
\
return res; \
} \
\
static inline unsigned int \
clear_c0_##name(unsigned int clear) \
{ \
unsigned int res; \
unsigned int omt; \
unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
res = read_c0_##name(); \
res &= ~clear; \
write_c0_##name(res); \
__emt(omt); \
local_irq_restore(flags); \
\
return res; \
} \
\
static inline unsigned int \
change_c0_##name(unsigned int change, unsigned int new) \
{ \
unsigned int res; \
unsigned int omt; \
unsigned long flags; \
\
local_irq_save(flags); \
\
omt = __dmt(); \
res = read_c0_##name(); \
res &= ~change; \
res |= (new & change); \
write_c0_##name(res); \
__emt(omt); \
local_irq_restore(flags); \
\
return res; \
}
#endif
__BUILD_SET_C0(status)
__BUILD_SET_C0(cause)
__BUILD_SET_C0(config)
__BUILD_SET_C0(intcontrol)
__BUILD_SET_C0(intctl)
__BUILD_SET_C0(srsmap)
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_MIPSREGS_H */