#
#  @(#)Makefile 1.4 95/01/18
#
#  ====================================================
#  Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
#
#  Developed at SunSoft, a Sun Microsystems, Inc. business.
#  Permission to use, copy, modify, and distribute this
#  software is freely granted, provided that this notice
#  is preserved.
#  ====================================================
#
#

#
# There are two options in making libm at fdlibm compile time:
# 	_IEEE_LIBM 	--- IEEE libm; smaller, and somewhat faster
#	_MULTI_LIBM	--- Support multi-standard at runtime by
#			    imposing wrapper functions defined in
#			    fdlibm.h:
#				_IEEE_MODE 	-- IEEE
#				_XOPEN_MODE 	-- X/OPEN
#				_POSIX_MODE 	-- POSIX/ANSI
#				_SVID3_MODE 	-- SVID
#
# Here is how to set up CFLAGS to create the desired libm at
# compile time:
#
# 	CFLAGS = -D_IEEE_LIBM		... IEEE libm (recommended)
#	CFLAGS = -D_SVID3_MODE	... Multi-standard supported
#					    libm with SVID as the
#					    default standard
#	CFLAGS = -D_XOPEN_MODE	... Multi-standard supported
#					    libm with XOPEN as the
#					    default standard
#	CFLAGS = -D_POSIX_MODE	... Multi-standard supported
#					    libm with POSIX as the
#					    default standard
#	CFLAGS = 			... Multi-standard supported
#					    libm with IEEE as the
#					    default standard
#
# NOTE: if scalb's second arguement is an int, then one must
# define _SCALB_INT in CFLAGS. The default prototype of scalb
# is double ieee_scalb(double, double)
#

prefix	= @prefix@

AR	= @AR@

CC	= @CC@

#
# Default IEEE libm
#
CFLAGS	= @CFLAGS@ -D_IEEE_LIBM

CHMOD	= @CHMOD@

CP	= @CP@

INCFILES = fdlibm.h

LDFLAGS	= @LDFLAGS@

LIB	= libfdm.a

LIBS	= @LIBS@

RANLIB	= @RANLIB@

RM	= @RM@ -f

.INIT: $(INCFILES)

.KEEP_STATE:

src = 	k_standard.c k_rem_pio2.c \
	k_cos.c k_sin.c k_tan.c \
	e_acos.c e_acosh.c e_asin.c e_atan2.c \
	e_atanh.c e_cosh.c e_exp.c e_fmod.c \
	e_gamma.c e_gamma_r.c e_hypot.c e_j0.c \
	e_j1.c e_jn.c e_lgamma.c e_lgamma_r.c \
	e_log.c e_log10.c e_pow.c e_rem_pio2.c e_remainder.c \
	e_scalb.c e_sinh.c e_sqrt.c \
	w_acos.c w_acosh.c w_asin.c w_atan2.c \
	w_atanh.c w_cosh.c w_exp.c w_fmod.c \
	w_gamma.c w_gamma_r.c w_hypot.c w_j0.c \
	w_j1.c w_jn.c w_lgamma.c w_lgamma_r.c \
	w_log.c w_log10.c w_pow.c w_remainder.c \
	w_scalb.c w_sinh.c w_sqrt.c \
	s_asinh.c s_atan.c s_cbrt.c s_ceil.c s_copysign.c \
	s_cos.c s_erf.c s_expm1.c s_fabs.c s_finite.c s_floor.c \
	s_frexp.c s_ilogb.c s_isnan.c s_ldexp.c s_lib_version.c \
	s_log1p.c s_logb.c s_matherr.c s_modf.c s_nextafter.c \
	s_rint.c s_scalbn.c s_signgam.c s_significand.c s_sin.c \
	s_tan.c s_tanh.c

obj = 	k_standard.o k_rem_pio2.o \
	k_cos.o k_sin.o k_tan.o \
	e_acos.o e_acosh.o e_asin.o e_atan2.o \
	e_atanh.o e_cosh.o e_exp.o e_fmod.o \
	e_gamma.o e_gamma_r.o e_hypot.o e_j0.o \
	e_j1.o e_jn.o e_lgamma.o e_lgamma_r.o \
	e_log.o e_log10.o e_pow.o e_rem_pio2.o e_remainder.o  \
	e_scalb.o e_sinh.o e_sqrt.o \
	w_acos.o w_acosh.o w_asin.o w_atan2.o \
	w_atanh.o w_cosh.o w_exp.o w_fmod.o \
	w_gamma.o w_gamma_r.o w_hypot.o w_j0.o \
	w_j1.o w_jn.o w_lgamma.o w_lgamma_r.o \
	w_log.o w_log10.o w_pow.o w_remainder.o \
	w_scalb.o w_sinh.o w_sqrt.o \
	s_asinh.o s_atan.o s_cbrt.o s_ceil.o s_copysign.o \
	s_cos.o s_erf.o s_expm1.o s_fabs.o s_finite.o s_floor.o \
	s_frexp.o s_ilogb.o s_isnan.o s_ldexp.o s_lib_version.o \
	s_log1p.o s_logb.o s_matherr.o s_modf.o s_nextafter.o \
	s_rint.o s_scalbn.o s_signgam.o s_significand.o s_sin.o \
	s_tan.o s_tanh.o

all: $(LIB)

check:
	@echo This package does not have a validation suite.

clean:
	-$(RM) *~ #* core a.out

distclean:	mostlyclean
	-$(RM) $(LIB)
	-$(RM) -r autom4te.cache/
	-$(RM) config.cache config.log config.status Makefile

install:	$(LIB) uninstall
	$(CP) $(LIB) $(prefix)/lib/$(LIB)
	$(CHMOD) 664 $(prefix)/lib/$(LIB)
	$(RANLIB) $(prefix)/lib/$(LIB) || true

$(LIB) : $(obj)
	$(AR) cru $(LIB) $(obj)
	$(RANLIB) $(LIB) || true

maintainer-clean:	distclean
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."
	-$(RM) configure

mostlyclean:	clean
	-$(RM) $(obj)

source: $(src) README

uninstall:
	-$(RM) $(prefix)/lib/$(LIB)