/*
* This file was generated automatically by gen-mterp.py for 'armv7-a-neon'.
*
* --> DO NOT EDIT <--
*/
/* File: armv5te/header.S */
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* ARMv5 definitions and declarations.
*/
/*
ARM EABI general notes:
r0-r3 hold first 4 args to a method; they are not preserved across method calls
r4-r8 are available for general use
r9 is given special treatment in some situations, but not for us
r10 (sl) seems to be generally available
r11 (fp) is used by gcc (unless -fomit-frame-pointer is set)
r12 (ip) is scratch -- not preserved across method calls
r13 (sp) should be managed carefully in case a signal arrives
r14 (lr) must be preserved
r15 (pc) can be tinkered with directly
r0 holds returns of <= 4 bytes
r0-r1 hold returns of 8 bytes, low word in r0
Callee must save/restore r4+ (except r12) if it modifies them. If VFP
is present, registers s16-s31 (a/k/a d8-d15, a/k/a q4-q7) must be preserved,
s0-s15 (d0-d7, q0-a3) do not need to be.
Stack is "full descending". Only the arguments that don't fit in the first 4
registers are placed on the stack. "sp" points at the first stacked argument
(i.e. the 5th arg).
VFP: single-precision results in s0, double-precision results in d0.
In the EABI, "sp" must be 64-bit aligned on entry to a function, and any
64-bit quantities (long long, double) must be 64-bit aligned.
*/
/*
Mterp and ARM notes:
The following registers have fixed assignments:
reg nick purpose
r4 rPC interpreted program counter, used for fetching instructions
r5 rFP interpreted frame pointer, used for accessing locals and args
r6 rSELF self (Thread) pointer
r7 rINST first 16-bit code unit of current instruction
r8 rIBASE interpreted instruction base pointer, used for computed goto
Macros are provided for common operations. Each macro MUST emit only
one instruction to make instruction-counting easier. They MUST NOT alter
unspecified registers or condition codes.
*/
/* single-purpose registers, given names for clarity */
#define rPC r4
#define rFP r5
#define rSELF r6
#define rINST r7
#define rIBASE r8
/* save/restore the PC and/or FP from the thread struct */
#define LOAD_PC_FROM_SELF() ldr rPC, [rSELF, #offThread_pc]
#define SAVE_PC_TO_SELF() str rPC, [rSELF, #offThread_pc]
#define LOAD_FP_FROM_SELF() ldr rFP, [rSELF, #offThread_curFrame]
#define SAVE_FP_TO_SELF() str rFP, [rSELF, #offThread_curFrame]
#define LOAD_PC_FP_FROM_SELF() ldmia rSELF, {rPC, rFP}
#define SAVE_PC_FP_TO_SELF() stmia rSELF, {rPC, rFP}
/*
* "export" the PC to the stack frame, f/b/o future exception objects. Must
* be done *before* something throws.
*
* In C this is "SAVEAREA_FROM_FP(fp)->xtra.currentPc = pc", i.e.
* fp - sizeof(StackSaveArea) + offsetof(SaveArea, xtra.currentPc)
*
* It's okay to do this more than once.
*/
#define EXPORT_PC() \
str rPC, [rFP, #(-sizeofStackSaveArea + offStackSaveArea_currentPc)]
/*
* Given a frame pointer, find the stack save area.
*
* In C this is "((StackSaveArea*)(_fp) -1)".
*/
#define SAVEAREA_FROM_FP(_reg, _fpreg) \
sub _reg, _fpreg, #sizeofStackSaveArea
/*
* Fetch the next instruction from rPC into rINST. Does not advance rPC.
*/
#define FETCH_INST() ldrh rINST, [rPC]
/*
* Fetch the next instruction from the specified offset. Advances rPC
* to point to the next instruction. "_count" is in 16-bit code units.
*
* Because of the limited size of immediate constants on ARM, this is only
* suitable for small forward movements (i.e. don't try to implement "goto"
* with this).
*
* This must come AFTER anything that can throw an exception, or the
* exception catch may miss. (This also implies that it must come after
* EXPORT_PC().)
*/
#define FETCH_ADVANCE_INST(_count) ldrh rINST, [rPC, #((_count)*2)]!
/*
* The operation performed here is similar to FETCH_ADVANCE_INST, except the
* src and dest registers are parameterized (not hard-wired to rPC and rINST).
*/
#define PREFETCH_ADVANCE_INST(_dreg, _sreg, _count) \
ldrh _dreg, [_sreg, #((_count)*2)]!
/*
* Fetch the next instruction from an offset specified by _reg. Updates
* rPC to point to the next instruction. "_reg" must specify the distance
* in bytes, *not* 16-bit code units, and may be a signed value.
*
* We want to write "ldrh rINST, [rPC, _reg, lsl #1]!", but some of the
* bits that hold the shift distance are used for the half/byte/sign flags.
* In some cases we can pre-double _reg for free, so we require a byte offset
* here.
*/
#define FETCH_ADVANCE_INST_RB(_reg) ldrh rINST, [rPC, _reg]!
/*
* Fetch a half-word code unit from an offset past the current PC. The
* "_count" value is in 16-bit code units. Does not advance rPC.
*
* The "_S" variant works the same but treats the value as signed.
*/
#define FETCH(_reg, _count) ldrh _reg, [rPC, #((_count)*2)]
#define FETCH_S(_reg, _count) ldrsh _reg, [rPC, #((_count)*2)]
/*
* Fetch one byte from an offset past the current PC. Pass in the same
* "_count" as you would for FETCH, and an additional 0/1 indicating which
* byte of the halfword you want (lo/hi).
*/
#define FETCH_B(_reg, _count, _byte) ldrb _reg, [rPC, #((_count)*2+(_byte))]
/*
* Put the instruction's opcode field into the specified register.
*/
#define GET_INST_OPCODE(_reg) and _reg, rINST, #255
/*
* Put the prefetched instruction's opcode field into the specified register.
*/
#define GET_PREFETCHED_OPCODE(_oreg, _ireg) and _oreg, _ireg, #255
/*
* Begin executing the opcode in _reg. Because this only jumps within the
* interpreter, we don't have to worry about pre-ARMv5 THUMB interwork.
*/
#define GOTO_OPCODE(_reg) add pc, rIBASE, _reg, lsl #6
#define GOTO_OPCODE_BASE(_base,_reg) add pc, _base, _reg, lsl #6
#define GOTO_OPCODE_IFEQ(_reg) addeq pc, rIBASE, _reg, lsl #6
#define GOTO_OPCODE_IFNE(_reg) addne pc, rIBASE, _reg, lsl #6
/*
* Get/set the 32-bit value from a Dalvik register.
*/
#define GET_VREG(_reg, _vreg) ldr _reg, [rFP, _vreg, lsl #2]
#define SET_VREG(_reg, _vreg) str _reg, [rFP, _vreg, lsl #2]
/*
* Convert a virtual register index into an address.
*/
#define VREG_INDEX_TO_ADDR(_reg, _vreg) \
add _reg, rFP, _vreg, lsl #2
/*
* This is a #include, not a %include, because we want the C pre-processor
* to expand the macros into assembler assignment statements.
*/
#include "../common/asm-constants.h"
#if defined(WITH_JIT)
#include "../common/jit-config.h"
#endif
/* File: armv7-a/platform.S */
/*
* ===========================================================================
* CPU-version-specific defines
* ===========================================================================
*/
#if !defined(ANDROID_SMP)
# error "Must define ANDROID_SMP"
#endif
/*
* Macro for data memory barrier.
*/
.macro SMP_DMB
#if ANDROID_SMP != 0
dmb
#else
/* not SMP */
#endif
.endm
/*
* Macro for data memory barrier (store/store variant).
*/
.macro SMP_DMB_ST
#if ANDROID_SMP != 0
dmb st
#else
/* not SMP */
#endif
.endm
/* File: armv5te/entry.S */
/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Interpreter entry point.
*/
/*
* We don't have formal stack frames, so gdb scans upward in the code
* to find the start of the function (a label with the %function type),
* and then looks at the next few instructions to figure out what
* got pushed onto the stack. From this it figures out how to restore
* the registers, including PC, for the previous stack frame. If gdb
* sees a non-function label, it stops scanning, so either we need to
* have nothing but assembler-local labels between the entry point and
* the break, or we need to fake it out.
*
* When this is defined, we add some stuff to make gdb less confused.
*/
#define ASSIST_DEBUGGER 1
.text
.align 2
.global dvmMterpStdRun
.type dvmMterpStdRun, %function
/*
* On entry:
* r0 Thread* self
*
* The return comes via a call to dvmMterpStdBail().
*/
dvmMterpStdRun:
#define MTERP_ENTRY1 \
.save {r4-r10,fp,lr}; \
stmfd sp!, {r4-r10,fp,lr} @ save 9 regs
#define MTERP_ENTRY2 \
.pad #4; \
sub sp, sp, #4 @ align 64
.fnstart
MTERP_ENTRY1
MTERP_ENTRY2
/* save stack pointer, add magic word for debuggerd */
str sp, [r0, #offThread_bailPtr] @ save SP for eventual return
/* set up "named" registers, figure out entry point */
mov rSELF, r0 @ set rSELF
LOAD_PC_FP_FROM_SELF() @ load rPC and rFP from "thread"
ldr rIBASE, [rSELF, #offThread_curHandlerTable] @ set rIBASE
#if defined(WITH_JIT)
.LentryInstr:
/* Entry is always a possible trace start */
ldr r0, [rSELF, #offThread_pJitProfTable]
FETCH_INST()
mov r1, #0 @ prepare the value for the new state
str r1, [rSELF, #offThread_inJitCodeCache] @ back to the interp land
cmp r0,#0 @ is profiling disabled?
#if !defined(WITH_SELF_VERIFICATION)
bne common_updateProfile @ profiling is enabled
#else
ldr r2, [rSELF, #offThread_shadowSpace] @ to find out the jit exit state
beq 1f @ profiling is disabled
ldr r3, [r2, #offShadowSpace_jitExitState] @ jit exit state
cmp r3, #kSVSTraceSelect @ hot trace following?
moveq r2,#kJitTSelectRequestHot @ ask for trace selection
beq common_selectTrace @ go build the trace
cmp r3, #kSVSNoProfile @ don't profile the next instruction?
beq 1f @ intrepret the next instruction
b common_updateProfile @ collect profiles
#endif
1:
GET_INST_OPCODE(ip)
GOTO_OPCODE(ip)
#else
/* start executing the instruction at rPC */
FETCH_INST() @ load rINST from rPC
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
#endif
.Lbad_arg:
ldr r0, strBadEntryPoint
0: add r0, pc
@ r1 holds value of entryPoint
bl printf
bl dvmAbort
.fnend
.size dvmMterpStdRun, .-dvmMterpStdRun
strBadEntryPoint:
.word PCREL_REF(.LstrBadEntryPoint,0b)
.global dvmMterpStdBail
.type dvmMterpStdBail, %function
/*
* Restore the stack pointer and PC from the save point established on entry.
* This is essentially the same as a longjmp, but should be cheaper. The
* last instruction causes us to return to whoever called dvmMterpStdRun.
*
* We pushed some registers on the stack in dvmMterpStdRun, then saved
* SP and LR. Here we restore SP, restore the registers, and then restore
* LR to PC.
*
* On entry:
* r0 Thread* self
*/
dvmMterpStdBail:
ldr sp, [r0, #offThread_bailPtr] @ sp<- saved SP
add sp, sp, #4 @ un-align 64
ldmfd sp!, {r4-r10,fp,pc} @ restore 9 regs and return
.global dvmAsmInstructionStart
.type dvmAsmInstructionStart, %function
dvmAsmInstructionStart = .L_OP_NOP
.text
/* ------------------------------ */
.balign 64
.L_OP_NOP: /* 0x00 */
/* File: armv5te/OP_NOP.S */
FETCH_ADVANCE_INST(1) @ advance to next instr, load rINST
GET_INST_OPCODE(ip) @ ip<- opcode from rINST
GOTO_OPCODE(ip) @ execute it
#ifdef ASSIST_DEBUGGER
/* insert fake function header to help gdb find the stack frame */
.type dalvik_inst, %function
dalvik_inst:
.fnstart
MTERP_ENTRY1
MTERP_ENTRY2
.fnend
#endif
/* ------------------------------ */
.balign 64
.L_OP_MOVE: /* 0x01 */
/* File: armv6t2/OP_MOVE.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
mov r1, rINST, lsr #12 @ r1<- B from 15:12
ubfx r0, rINST, #8, #4 @ r0<- A from 11:8
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
GET_VREG(r2, r1) @ r2<- fp[B]
GET_INST_OPCODE(ip) @ ip<- opcode from rINST
SET_VREG(r2, r0) @ fp[A]<- r2
GOTO_OPCODE(ip) @ execute next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_FROM16: /* 0x02 */
/* File: armv5te/OP_MOVE_FROM16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
FETCH(r1, 1) @ r1<- BBBB
mov r0, rINST, lsr #8 @ r0<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r2, r1) @ r2<- fp[BBBB]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r0) @ fp[AA]<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_16: /* 0x03 */
/* File: armv5te/OP_MOVE_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
FETCH(r1, 2) @ r1<- BBBB
FETCH(r0, 1) @ r0<- AAAA
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
GET_VREG(r2, r1) @ r2<- fp[BBBB]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r0) @ fp[AAAA]<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_WIDE: /* 0x04 */
/* File: armv6t2/OP_MOVE_WIDE.S */
/* move-wide vA, vB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r2, rINST, #8, #4 @ r2<- A
add r3, rFP, r3, lsl #2 @ r3<- &fp[B]
add r2, rFP, r2, lsl #2 @ r2<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- fp[B]
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r2, {r0-r1} @ fp[A]<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_WIDE_FROM16: /* 0x05 */
/* File: armv5te/OP_MOVE_WIDE_FROM16.S */
/* move-wide/from16 vAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
FETCH(r3, 1) @ r3<- BBBB
mov r2, rINST, lsr #8 @ r2<- AA
add r3, rFP, r3, lsl #2 @ r3<- &fp[BBBB]
add r2, rFP, r2, lsl #2 @ r2<- &fp[AA]
ldmia r3, {r0-r1} @ r0/r1<- fp[BBBB]
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r2, {r0-r1} @ fp[AA]<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_WIDE_16: /* 0x06 */
/* File: armv5te/OP_MOVE_WIDE_16.S */
/* move-wide/16 vAAAA, vBBBB */
/* NOTE: regs can overlap, e.g. "move v6,v7" or "move v7,v6" */
FETCH(r3, 2) @ r3<- BBBB
FETCH(r2, 1) @ r2<- AAAA
add r3, rFP, r3, lsl #2 @ r3<- &fp[BBBB]
add r2, rFP, r2, lsl #2 @ r2<- &fp[AAAA]
ldmia r3, {r0-r1} @ r0/r1<- fp[BBBB]
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
stmia r2, {r0-r1} @ fp[AAAA]<- r0/r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_OBJECT: /* 0x07 */
/* File: armv5te/OP_MOVE_OBJECT.S */
/* File: armv5te/OP_MOVE.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
mov r1, rINST, lsr #12 @ r1<- B from 15:12
mov r0, rINST, lsr #8 @ r0<- A from 11:8
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
GET_VREG(r2, r1) @ r2<- fp[B]
and r0, r0, #15
GET_INST_OPCODE(ip) @ ip<- opcode from rINST
SET_VREG(r2, r0) @ fp[A]<- r2
GOTO_OPCODE(ip) @ execute next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_OBJECT_FROM16: /* 0x08 */
/* File: armv5te/OP_MOVE_OBJECT_FROM16.S */
/* File: armv5te/OP_MOVE_FROM16.S */
/* for: move/from16, move-object/from16 */
/* op vAA, vBBBB */
FETCH(r1, 1) @ r1<- BBBB
mov r0, rINST, lsr #8 @ r0<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r2, r1) @ r2<- fp[BBBB]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r0) @ fp[AA]<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_OBJECT_16: /* 0x09 */
/* File: armv5te/OP_MOVE_OBJECT_16.S */
/* File: armv5te/OP_MOVE_16.S */
/* for: move/16, move-object/16 */
/* op vAAAA, vBBBB */
FETCH(r1, 2) @ r1<- BBBB
FETCH(r0, 1) @ r0<- AAAA
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
GET_VREG(r2, r1) @ r2<- fp[BBBB]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r0) @ fp[AAAA]<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_RESULT: /* 0x0a */
/* File: armv5te/OP_MOVE_RESULT.S */
/* for: move-result, move-result-object */
/* op vAA */
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
ldr r0, [rSELF, #offThread_retval] @ r0<- self->retval.i
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[AA]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_RESULT_WIDE: /* 0x0b */
/* File: armv5te/OP_MOVE_RESULT_WIDE.S */
/* move-result-wide vAA */
mov r2, rINST, lsr #8 @ r2<- AA
add r3, rSELF, #offThread_retval @ r3<- &self->retval
add r2, rFP, r2, lsl #2 @ r2<- &fp[AA]
ldmia r3, {r0-r1} @ r0/r1<- retval.j
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
stmia r2, {r0-r1} @ fp[AA]<- r0/r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_RESULT_OBJECT: /* 0x0c */
/* File: armv5te/OP_MOVE_RESULT_OBJECT.S */
/* File: armv5te/OP_MOVE_RESULT.S */
/* for: move-result, move-result-object */
/* op vAA */
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
ldr r0, [rSELF, #offThread_retval] @ r0<- self->retval.i
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[AA]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MOVE_EXCEPTION: /* 0x0d */
/* File: armv5te/OP_MOVE_EXCEPTION.S */
/* move-exception vAA */
mov r2, rINST, lsr #8 @ r2<- AA
ldr r3, [rSELF, #offThread_exception] @ r3<- dvmGetException bypass
mov r1, #0 @ r1<- 0
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
SET_VREG(r3, r2) @ fp[AA]<- exception obj
GET_INST_OPCODE(ip) @ extract opcode from rINST
str r1, [rSELF, #offThread_exception] @ dvmClearException bypass
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_RETURN_VOID: /* 0x0e */
/* File: armv5te/OP_RETURN_VOID.S */
b common_returnFromMethod
/* ------------------------------ */
.balign 64
.L_OP_RETURN: /* 0x0f */
/* File: armv5te/OP_RETURN.S */
/*
* Return a 32-bit value. Copies the return value into the "thread"
* structure, then jumps to the return handler.
*
* for: return, return-object
*/
/* op vAA */
mov r2, rINST, lsr #8 @ r2<- AA
GET_VREG(r0, r2) @ r0<- vAA
str r0, [rSELF, #offThread_retval] @ retval.i <- vAA
b common_returnFromMethod
/* ------------------------------ */
.balign 64
.L_OP_RETURN_WIDE: /* 0x10 */
/* File: armv5te/OP_RETURN_WIDE.S */
/*
* Return a 64-bit value. Copies the return value into the "thread"
* structure, then jumps to the return handler.
*/
/* return-wide vAA */
mov r2, rINST, lsr #8 @ r2<- AA
add r2, rFP, r2, lsl #2 @ r2<- &fp[AA]
add r3, rSELF, #offThread_retval @ r3<- &self->retval
ldmia r2, {r0-r1} @ r0/r1 <- vAA/vAA+1
stmia r3, {r0-r1} @ retval<- r0/r1
b common_returnFromMethod
/* ------------------------------ */
.balign 64
.L_OP_RETURN_OBJECT: /* 0x11 */
/* File: armv5te/OP_RETURN_OBJECT.S */
/* File: armv5te/OP_RETURN.S */
/*
* Return a 32-bit value. Copies the return value into the "thread"
* structure, then jumps to the return handler.
*
* for: return, return-object
*/
/* op vAA */
mov r2, rINST, lsr #8 @ r2<- AA
GET_VREG(r0, r2) @ r0<- vAA
str r0, [rSELF, #offThread_retval] @ retval.i <- vAA
b common_returnFromMethod
/* ------------------------------ */
.balign 64
.L_OP_CONST_4: /* 0x12 */
/* File: armv6t2/OP_CONST_4.S */
/* const/4 vA, #+B */
mov r1, rINST, lsl #16 @ r1<- Bxxx0000
ubfx r0, rINST, #8, #4 @ r0<- A
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
mov r1, r1, asr #28 @ r1<- sssssssB (sign-extended)
GET_INST_OPCODE(ip) @ ip<- opcode from rINST
SET_VREG(r1, r0) @ fp[A]<- r1
GOTO_OPCODE(ip) @ execute next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST_16: /* 0x13 */
/* File: armv5te/OP_CONST_16.S */
/* const/16 vAA, #+BBBB */
FETCH_S(r0, 1) @ r0<- ssssBBBB (sign-extended)
mov r3, rINST, lsr #8 @ r3<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r3) @ vAA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST: /* 0x14 */
/* File: armv5te/OP_CONST.S */
/* const vAA, #+BBBBbbbb */
mov r3, rINST, lsr #8 @ r3<- AA
FETCH(r0, 1) @ r0<- bbbb (low)
FETCH(r1, 2) @ r1<- BBBB (high)
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
orr r0, r0, r1, lsl #16 @ r0<- BBBBbbbb
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r3) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST_HIGH16: /* 0x15 */
/* File: armv5te/OP_CONST_HIGH16.S */
/* const/high16 vAA, #+BBBB0000 */
FETCH(r0, 1) @ r0<- 0000BBBB (zero-extended)
mov r3, rINST, lsr #8 @ r3<- AA
mov r0, r0, lsl #16 @ r0<- BBBB0000
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r3) @ vAA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST_WIDE_16: /* 0x16 */
/* File: armv5te/OP_CONST_WIDE_16.S */
/* const-wide/16 vAA, #+BBBB */
FETCH_S(r0, 1) @ r0<- ssssBBBB (sign-extended)
mov r3, rINST, lsr #8 @ r3<- AA
mov r1, r0, asr #31 @ r1<- ssssssss
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
add r3, rFP, r3, lsl #2 @ r3<- &fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r3, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST_WIDE_32: /* 0x17 */
/* File: armv5te/OP_CONST_WIDE_32.S */
/* const-wide/32 vAA, #+BBBBbbbb */
FETCH(r0, 1) @ r0<- 0000bbbb (low)
mov r3, rINST, lsr #8 @ r3<- AA
FETCH_S(r2, 2) @ r2<- ssssBBBB (high)
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
orr r0, r0, r2, lsl #16 @ r0<- BBBBbbbb
add r3, rFP, r3, lsl #2 @ r3<- &fp[AA]
mov r1, r0, asr #31 @ r1<- ssssssss
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r3, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST_WIDE: /* 0x18 */
/* File: armv5te/OP_CONST_WIDE.S */
/* const-wide vAA, #+HHHHhhhhBBBBbbbb */
FETCH(r0, 1) @ r0<- bbbb (low)
FETCH(r1, 2) @ r1<- BBBB (low middle)
FETCH(r2, 3) @ r2<- hhhh (high middle)
orr r0, r0, r1, lsl #16 @ r0<- BBBBbbbb (low word)
FETCH(r3, 4) @ r3<- HHHH (high)
mov r9, rINST, lsr #8 @ r9<- AA
orr r1, r2, r3, lsl #16 @ r1<- HHHHhhhh (high word)
FETCH_ADVANCE_INST(5) @ advance rPC, load rINST
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST_WIDE_HIGH16: /* 0x19 */
/* File: armv5te/OP_CONST_WIDE_HIGH16.S */
/* const-wide/high16 vAA, #+BBBB000000000000 */
FETCH(r1, 1) @ r1<- 0000BBBB (zero-extended)
mov r3, rINST, lsr #8 @ r3<- AA
mov r0, #0 @ r0<- 00000000
mov r1, r1, lsl #16 @ r1<- BBBB0000
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
add r3, rFP, r3, lsl #2 @ r3<- &fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r3, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST_STRING: /* 0x1a */
/* File: armv5te/OP_CONST_STRING.S */
/* const/string vAA, String@BBBB */
FETCH(r1, 1) @ r1<- BBBB
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- self->methodClassDex
mov r9, rINST, lsr #8 @ r9<- AA
ldr r2, [r2, #offDvmDex_pResStrings] @ r2<- dvmDex->pResStrings
ldr r0, [r2, r1, lsl #2] @ r0<- pResStrings[BBBB]
cmp r0, #0 @ not yet resolved?
beq .LOP_CONST_STRING_resolve
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r9) @ vAA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST_STRING_JUMBO: /* 0x1b */
/* File: armv5te/OP_CONST_STRING_JUMBO.S */
/* const/string vAA, String@BBBBBBBB */
FETCH(r0, 1) @ r0<- bbbb (low)
FETCH(r1, 2) @ r1<- BBBB (high)
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- self->methodClassDex
mov r9, rINST, lsr #8 @ r9<- AA
ldr r2, [r2, #offDvmDex_pResStrings] @ r2<- dvmDex->pResStrings
orr r1, r0, r1, lsl #16 @ r1<- BBBBbbbb
ldr r0, [r2, r1, lsl #2] @ r0<- pResStrings[BBBB]
cmp r0, #0
beq .LOP_CONST_STRING_JUMBO_resolve
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
SET_VREG(r0, r9) @ vAA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CONST_CLASS: /* 0x1c */
/* File: armv5te/OP_CONST_CLASS.S */
/* const/class vAA, Class@BBBB */
FETCH(r1, 1) @ r1<- BBBB
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- self->methodClassDex
mov r9, rINST, lsr #8 @ r9<- AA
ldr r2, [r2, #offDvmDex_pResClasses] @ r2<- dvmDex->pResClasses
ldr r0, [r2, r1, lsl #2] @ r0<- pResClasses[BBBB]
cmp r0, #0 @ not yet resolved?
beq .LOP_CONST_CLASS_resolve
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r9) @ vAA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MONITOR_ENTER: /* 0x1d */
/* File: armv5te/OP_MONITOR_ENTER.S */
/*
* Synchronize on an object.
*/
/* monitor-enter vAA */
mov r2, rINST, lsr #8 @ r2<- AA
GET_VREG(r1, r2) @ r1<- vAA (object)
mov r0, rSELF @ r0<- self
cmp r1, #0 @ null object?
EXPORT_PC() @ need for precise GC
beq common_errNullObject @ null object, throw an exception
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
bl dvmLockObject @ call(self, obj)
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MONITOR_EXIT: /* 0x1e */
/* File: armv5te/OP_MONITOR_EXIT.S */
/*
* Unlock an object.
*
* Exceptions that occur when unlocking a monitor need to appear as
* if they happened at the following instruction. See the Dalvik
* instruction spec.
*/
/* monitor-exit vAA */
mov r2, rINST, lsr #8 @ r2<- AA
EXPORT_PC() @ before fetch: export the PC
GET_VREG(r1, r2) @ r1<- vAA (object)
cmp r1, #0 @ null object?
beq 1f @ yes
mov r0, rSELF @ r0<- self
bl dvmUnlockObject @ r0<- success for unlock(self, obj)
cmp r0, #0 @ failed?
FETCH_ADVANCE_INST(1) @ before throw: advance rPC, load rINST
beq common_exceptionThrown @ yes, exception is pending
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
1:
FETCH_ADVANCE_INST(1) @ advance before throw
b common_errNullObject
/* ------------------------------ */
.balign 64
.L_OP_CHECK_CAST: /* 0x1f */
/* File: armv5te/OP_CHECK_CAST.S */
/*
* Check to see if a cast from one class to another is allowed.
*/
/* check-cast vAA, class@BBBB */
mov r3, rINST, lsr #8 @ r3<- AA
FETCH(r2, 1) @ r2<- BBBB
GET_VREG(r9, r3) @ r9<- object
ldr r0, [rSELF, #offThread_methodClassDex] @ r0<- pDvmDex
cmp r9, #0 @ is object null?
ldr r0, [r0, #offDvmDex_pResClasses] @ r0<- pDvmDex->pResClasses
beq .LOP_CHECK_CAST_okay @ null obj, cast always succeeds
ldr r1, [r0, r2, lsl #2] @ r1<- resolved class
ldr r0, [r9, #offObject_clazz] @ r0<- obj->clazz
cmp r1, #0 @ have we resolved this before?
beq .LOP_CHECK_CAST_resolve @ not resolved, do it now
.LOP_CHECK_CAST_resolved:
cmp r0, r1 @ same class (trivial success)?
bne .LOP_CHECK_CAST_fullcheck @ no, do full check
.LOP_CHECK_CAST_okay:
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_INSTANCE_OF: /* 0x20 */
/* File: armv5te/OP_INSTANCE_OF.S */
/*
* Check to see if an object reference is an instance of a class.
*
* Most common situation is a non-null object, being compared against
* an already-resolved class.
*/
/* instance-of vA, vB, class@CCCC */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
GET_VREG(r0, r3) @ r0<- vB (object)
and r9, r9, #15 @ r9<- A
cmp r0, #0 @ is object null?
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- pDvmDex
beq .LOP_INSTANCE_OF_store @ null obj, not an instance, store r0
FETCH(r3, 1) @ r3<- CCCC
ldr r2, [r2, #offDvmDex_pResClasses] @ r2<- pDvmDex->pResClasses
ldr r1, [r2, r3, lsl #2] @ r1<- resolved class
ldr r0, [r0, #offObject_clazz] @ r0<- obj->clazz
cmp r1, #0 @ have we resolved this before?
beq .LOP_INSTANCE_OF_resolve @ not resolved, do it now
.LOP_INSTANCE_OF_resolved: @ r0=obj->clazz, r1=resolved class
cmp r0, r1 @ same class (trivial success)?
beq .LOP_INSTANCE_OF_trivial @ yes, trivial finish
b .LOP_INSTANCE_OF_fullcheck @ no, do full check
/* ------------------------------ */
.balign 64
.L_OP_ARRAY_LENGTH: /* 0x21 */
/* File: armv6t2/OP_ARRAY_LENGTH.S */
/*
* Return the length of an array.
*/
mov r1, rINST, lsr #12 @ r1<- B
ubfx r2, rINST, #8, #4 @ r2<- A
GET_VREG(r0, r1) @ r0<- vB (object ref)
cmp r0, #0 @ is object null?
beq common_errNullObject @ yup, fail
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
ldr r3, [r0, #offArrayObject_length] @ r3<- array length
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r3, r2) @ vB<- length
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_NEW_INSTANCE: /* 0x22 */
/* File: armv5te/OP_NEW_INSTANCE.S */
/*
* Create a new instance of a class.
*/
/* new-instance vAA, class@BBBB */
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResClasses] @ r3<- pDvmDex->pResClasses
ldr r0, [r3, r1, lsl #2] @ r0<- resolved class
#if defined(WITH_JIT)
add r10, r3, r1, lsl #2 @ r10<- &resolved_class
#endif
EXPORT_PC() @ req'd for init, resolve, alloc
cmp r0, #0 @ already resolved?
beq .LOP_NEW_INSTANCE_resolve @ no, resolve it now
.LOP_NEW_INSTANCE_resolved: @ r0=class
ldrb r1, [r0, #offClassObject_status] @ r1<- ClassStatus enum
cmp r1, #CLASS_INITIALIZED @ has class been initialized?
bne .LOP_NEW_INSTANCE_needinit @ no, init class now
.LOP_NEW_INSTANCE_initialized: @ r0=class
mov r1, #ALLOC_DONT_TRACK @ flags for alloc call
bl dvmAllocObject @ r0<- new object
b .LOP_NEW_INSTANCE_finish @ continue
/* ------------------------------ */
.balign 64
.L_OP_NEW_ARRAY: /* 0x23 */
/* File: armv5te/OP_NEW_ARRAY.S */
/*
* Allocate an array of objects, specified with the array class
* and a count.
*
* The verifier guarantees that this is an array class, so we don't
* check for it here.
*/
/* new-array vA, vB, class@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
FETCH(r2, 1) @ r2<- CCCC
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
GET_VREG(r1, r0) @ r1<- vB (array length)
ldr r3, [r3, #offDvmDex_pResClasses] @ r3<- pDvmDex->pResClasses
cmp r1, #0 @ check length
ldr r0, [r3, r2, lsl #2] @ r0<- resolved class
bmi common_errNegativeArraySize @ negative length, bail - len in r1
cmp r0, #0 @ already resolved?
EXPORT_PC() @ req'd for resolve, alloc
bne .LOP_NEW_ARRAY_finish @ resolved, continue
b .LOP_NEW_ARRAY_resolve @ do resolve now
/* ------------------------------ */
.balign 64
.L_OP_FILLED_NEW_ARRAY: /* 0x24 */
/* File: armv5te/OP_FILLED_NEW_ARRAY.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type@BBBB */
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResClasses] @ r3<- pDvmDex->pResClasses
EXPORT_PC() @ need for resolve and alloc
ldr r0, [r3, r1, lsl #2] @ r0<- resolved class
mov r10, rINST, lsr #8 @ r10<- AA or BA
cmp r0, #0 @ already resolved?
bne .LOP_FILLED_NEW_ARRAY_continue @ yes, continue on
8: ldr r3, [rSELF, #offThread_method] @ r3<- self->method
mov r2, #0 @ r2<- false
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveClass @ r0<- call(clazz, ref)
cmp r0, #0 @ got null?
beq common_exceptionThrown @ yes, handle exception
b .LOP_FILLED_NEW_ARRAY_continue
/* ------------------------------ */
.balign 64
.L_OP_FILLED_NEW_ARRAY_RANGE: /* 0x25 */
/* File: armv5te/OP_FILLED_NEW_ARRAY_RANGE.S */
/* File: armv5te/OP_FILLED_NEW_ARRAY.S */
/*
* Create a new array with elements filled from registers.
*
* for: filled-new-array, filled-new-array/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, type@BBBB */
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResClasses] @ r3<- pDvmDex->pResClasses
EXPORT_PC() @ need for resolve and alloc
ldr r0, [r3, r1, lsl #2] @ r0<- resolved class
mov r10, rINST, lsr #8 @ r10<- AA or BA
cmp r0, #0 @ already resolved?
bne .LOP_FILLED_NEW_ARRAY_RANGE_continue @ yes, continue on
8: ldr r3, [rSELF, #offThread_method] @ r3<- self->method
mov r2, #0 @ r2<- false
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveClass @ r0<- call(clazz, ref)
cmp r0, #0 @ got null?
beq common_exceptionThrown @ yes, handle exception
b .LOP_FILLED_NEW_ARRAY_RANGE_continue
/* ------------------------------ */
.balign 64
.L_OP_FILL_ARRAY_DATA: /* 0x26 */
/* File: armv5te/OP_FILL_ARRAY_DATA.S */
/* fill-array-data vAA, +BBBBBBBB */
FETCH(r0, 1) @ r0<- bbbb (lo)
FETCH(r1, 2) @ r1<- BBBB (hi)
mov r3, rINST, lsr #8 @ r3<- AA
orr r1, r0, r1, lsl #16 @ r1<- BBBBbbbb
GET_VREG(r0, r3) @ r0<- vAA (array object)
add r1, rPC, r1, lsl #1 @ r1<- PC + BBBBbbbb*2 (array data off.)
EXPORT_PC();
bl dvmInterpHandleFillArrayData@ fill the array with predefined data
cmp r0, #0 @ 0 means an exception is thrown
beq common_exceptionThrown @ has exception
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_THROW: /* 0x27 */
/* File: armv5te/OP_THROW.S */
/*
* Throw an exception object in the current thread.
*/
/* throw vAA */
mov r2, rINST, lsr #8 @ r2<- AA
GET_VREG(r1, r2) @ r1<- vAA (exception object)
EXPORT_PC() @ exception handler can throw
cmp r1, #0 @ null object?
beq common_errNullObject @ yes, throw an NPE instead
@ bypass dvmSetException, just store it
str r1, [rSELF, #offThread_exception] @ thread->exception<- obj
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_GOTO: /* 0x28 */
/* File: armv5te/OP_GOTO.S */
/*
* Unconditional branch, 8-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto +AA */
/* tuning: use sbfx for 6t2+ targets */
mov r0, rINST, lsl #16 @ r0<- AAxx0000
movs r1, r0, asr #24 @ r1<- ssssssAA (sign-extended)
add r2, r1, r1 @ r2<- byte offset, set flags
@ If backwards branch refresh rIBASE
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh handler base
FETCH_ADVANCE_INST_RB(r2) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
bmi common_testUpdateProfile @ (r0) check for trace hotness
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_GOTO_16: /* 0x29 */
/* File: armv5te/OP_GOTO_16.S */
/*
* Unconditional branch, 16-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*/
/* goto/16 +AAAA */
FETCH_S(r0, 1) @ r0<- ssssAAAA (sign-extended)
adds r1, r0, r0 @ r1<- byte offset, flags set
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh handler base
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
bmi common_testUpdateProfile @ (r0) hot trace head?
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_GOTO_32: /* 0x2a */
/* File: armv5te/OP_GOTO_32.S */
/*
* Unconditional branch, 32-bit offset.
*
* The branch distance is a signed code-unit offset, which we need to
* double to get a byte offset.
*
* Unlike most opcodes, this one is allowed to branch to itself, so
* our "backward branch" test must be "<=0" instead of "<0". Because
* we need the V bit set, we'll use an adds to convert from Dalvik
* offset to byte offset.
*/
/* goto/32 +AAAAAAAA */
FETCH(r0, 1) @ r0<- aaaa (lo)
FETCH(r1, 2) @ r1<- AAAA (hi)
orr r0, r0, r1, lsl #16 @ r0<- AAAAaaaa
adds r1, r0, r0 @ r1<- byte offset
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrle rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh handler base
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
ble common_testUpdateProfile @ (r0) hot trace head?
#else
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
ldrle rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh handler base
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_PACKED_SWITCH: /* 0x2b */
/* File: armv5te/OP_PACKED_SWITCH.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* When the JIT is present, all targets are considered treated as
* a potential trace heads regardless of branch direction.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
FETCH(r0, 1) @ r0<- bbbb (lo)
FETCH(r1, 2) @ r1<- BBBB (hi)
mov r3, rINST, lsr #8 @ r3<- AA
orr r0, r0, r1, lsl #16 @ r0<- BBBBbbbb
GET_VREG(r1, r3) @ r1<- vAA
add r0, rPC, r0, lsl #1 @ r0<- PC + BBBBbbbb*2
bl dvmInterpHandlePackedSwitch @ r0<- code-unit branch offset
adds r1, r0, r0 @ r1<- byte offset; clear V
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrle rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh handler base
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
cmp r0, #0
bne common_updateProfile
#else
ldrle rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh handler base
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPARSE_SWITCH: /* 0x2c */
/* File: armv5te/OP_SPARSE_SWITCH.S */
/* File: armv5te/OP_PACKED_SWITCH.S */
/*
* Handle a packed-switch or sparse-switch instruction. In both cases
* we decode it and hand it off to a helper function.
*
* We don't really expect backward branches in a switch statement, but
* they're perfectly legal, so we check for them here.
*
* When the JIT is present, all targets are considered treated as
* a potential trace heads regardless of branch direction.
*
* for: packed-switch, sparse-switch
*/
/* op vAA, +BBBB */
FETCH(r0, 1) @ r0<- bbbb (lo)
FETCH(r1, 2) @ r1<- BBBB (hi)
mov r3, rINST, lsr #8 @ r3<- AA
orr r0, r0, r1, lsl #16 @ r0<- BBBBbbbb
GET_VREG(r1, r3) @ r1<- vAA
add r0, rPC, r0, lsl #1 @ r0<- PC + BBBBbbbb*2
bl dvmInterpHandleSparseSwitch @ r0<- code-unit branch offset
adds r1, r0, r0 @ r1<- byte offset; clear V
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrle rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh handler base
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
cmp r0, #0
bne common_updateProfile
#else
ldrle rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh handler base
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_CMPL_FLOAT: /* 0x2d */
/* File: arm-vfp/OP_CMPL_FLOAT.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x > y) {
* return 1;
* } else if (x < y) {
* return -1;
* } else {
* return -1;
* }
* }
*/
/* op vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
flds s0, [r2] @ s0<- vBB
flds s1, [r3] @ s1<- vCC
fcmpes s0, s1 @ compare (vBB, vCC)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
mvn r0, #0 @ r0<- -1 (default)
GET_INST_OPCODE(ip) @ extract opcode from rINST
fmstat @ export status flags
movgt r0, #1 @ (greater than) r1<- 1
moveq r0, #0 @ (equal) r1<- 0
b .LOP_CMPL_FLOAT_finish @ argh
/* ------------------------------ */
.balign 64
.L_OP_CMPG_FLOAT: /* 0x2e */
/* File: arm-vfp/OP_CMPG_FLOAT.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x < y) {
* return -1;
* } else if (x > y) {
* return 1;
* } else {
* return 1;
* }
* }
*/
/* op vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
flds s0, [r2] @ s0<- vBB
flds s1, [r3] @ s1<- vCC
fcmpes s0, s1 @ compare (vBB, vCC)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
mov r0, #1 @ r0<- 1 (default)
GET_INST_OPCODE(ip) @ extract opcode from rINST
fmstat @ export status flags
mvnmi r0, #0 @ (less than) r1<- -1
moveq r0, #0 @ (equal) r1<- 0
b .LOP_CMPG_FLOAT_finish @ argh
/* ------------------------------ */
.balign 64
.L_OP_CMPL_DOUBLE: /* 0x2f */
/* File: arm-vfp/OP_CMPL_DOUBLE.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x > y) {
* return 1;
* } else if (x < y) {
* return -1;
* } else {
* return -1;
* }
* }
*/
/* op vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
fldd d0, [r2] @ d0<- vBB
fldd d1, [r3] @ d1<- vCC
fcmped d0, d1 @ compare (vBB, vCC)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
mvn r0, #0 @ r0<- -1 (default)
GET_INST_OPCODE(ip) @ extract opcode from rINST
fmstat @ export status flags
movgt r0, #1 @ (greater than) r1<- 1
moveq r0, #0 @ (equal) r1<- 0
b .LOP_CMPL_DOUBLE_finish @ argh
/* ------------------------------ */
.balign 64
.L_OP_CMPG_DOUBLE: /* 0x30 */
/* File: arm-vfp/OP_CMPG_DOUBLE.S */
/*
* Compare two floating-point values. Puts 0, 1, or -1 into the
* destination register based on the results of the comparison.
*
* int compare(x, y) {
* if (x == y) {
* return 0;
* } else if (x < y) {
* return -1;
* } else if (x > y) {
* return 1;
* } else {
* return 1;
* }
* }
*/
/* op vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
fldd d0, [r2] @ d0<- vBB
fldd d1, [r3] @ d1<- vCC
fcmped d0, d1 @ compare (vBB, vCC)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
mov r0, #1 @ r0<- 1 (default)
GET_INST_OPCODE(ip) @ extract opcode from rINST
fmstat @ export status flags
mvnmi r0, #0 @ (less than) r1<- -1
moveq r0, #0 @ (equal) r1<- 0
b .LOP_CMPG_DOUBLE_finish @ argh
/* ------------------------------ */
.balign 64
.L_OP_CMP_LONG: /* 0x31 */
/* File: armv5te/OP_CMP_LONG.S */
/*
* Compare two 64-bit values. Puts 0, 1, or -1 into the destination
* register based on the results of the comparison.
*
* We load the full values with LDM, but in practice many values could
* be resolved by only looking at the high word. This could be made
* faster or slower by splitting the LDM into a pair of LDRs.
*
* If we just wanted to set condition flags, we could do this:
* subs ip, r0, r2
* sbcs ip, r1, r3
* subeqs ip, r0, r2
* Leaving { <0, 0, >0 } in ip. However, we have to set it to a specific
* integer value, which we can do with 2 conditional mov/mvn instructions
* (set 1, set -1; if they're equal we already have 0 in ip), giving
* us a constant 5-cycle path plus a branch at the end to the
* instruction epilogue code. The multi-compare approach below needs
* 2 or 3 cycles + branch if the high word doesn't match, 6 + branch
* in the worst case (the 64-bit values are equal).
*/
/* cmp-long vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
cmp r1, r3 @ compare (vBB+1, vCC+1)
blt .LOP_CMP_LONG_less @ signed compare on high part
bgt .LOP_CMP_LONG_greater
subs r1, r0, r2 @ r1<- r0 - r2
bhi .LOP_CMP_LONG_greater @ unsigned compare on low part
bne .LOP_CMP_LONG_less
b .LOP_CMP_LONG_finish @ equal; r1 already holds 0
/* ------------------------------ */
.balign 64
.L_OP_IF_EQ: /* 0x32 */
/* File: armv6t2/OP_IF_EQ.S */
/* File: armv6t2/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG(r3, r1) @ r3<- vB
GET_VREG(r2, r0) @ r2<- vA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, r3 @ compare (vA, vB)
movne r1, #2 @ r1<- BYTE branch dist for not-taken
adds r2, r1, r1 @ convert to bytes, check sign
FETCH_ADVANCE_INST_RB(r2) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
cmp r0, #0
bne common_updateProfile
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_NE: /* 0x33 */
/* File: armv6t2/OP_IF_NE.S */
/* File: armv6t2/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG(r3, r1) @ r3<- vB
GET_VREG(r2, r0) @ r2<- vA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, r3 @ compare (vA, vB)
moveq r1, #2 @ r1<- BYTE branch dist for not-taken
adds r2, r1, r1 @ convert to bytes, check sign
FETCH_ADVANCE_INST_RB(r2) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
cmp r0, #0
bne common_updateProfile
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_LT: /* 0x34 */
/* File: armv6t2/OP_IF_LT.S */
/* File: armv6t2/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG(r3, r1) @ r3<- vB
GET_VREG(r2, r0) @ r2<- vA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, r3 @ compare (vA, vB)
movge r1, #2 @ r1<- BYTE branch dist for not-taken
adds r2, r1, r1 @ convert to bytes, check sign
FETCH_ADVANCE_INST_RB(r2) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
cmp r0, #0
bne common_updateProfile
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_GE: /* 0x35 */
/* File: armv6t2/OP_IF_GE.S */
/* File: armv6t2/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG(r3, r1) @ r3<- vB
GET_VREG(r2, r0) @ r2<- vA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, r3 @ compare (vA, vB)
movlt r1, #2 @ r1<- BYTE branch dist for not-taken
adds r2, r1, r1 @ convert to bytes, check sign
FETCH_ADVANCE_INST_RB(r2) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
cmp r0, #0
bne common_updateProfile
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_GT: /* 0x36 */
/* File: armv6t2/OP_IF_GT.S */
/* File: armv6t2/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG(r3, r1) @ r3<- vB
GET_VREG(r2, r0) @ r2<- vA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, r3 @ compare (vA, vB)
movle r1, #2 @ r1<- BYTE branch dist for not-taken
adds r2, r1, r1 @ convert to bytes, check sign
FETCH_ADVANCE_INST_RB(r2) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
cmp r0, #0
bne common_updateProfile
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_LE: /* 0x37 */
/* File: armv6t2/OP_IF_LE.S */
/* File: armv6t2/bincmp.S */
/*
* Generic two-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* For: if-eq, if-ne, if-lt, if-ge, if-gt, if-le
*/
/* if-cmp vA, vB, +CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG(r3, r1) @ r3<- vB
GET_VREG(r2, r0) @ r2<- vA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, r3 @ compare (vA, vB)
movgt r1, #2 @ r1<- BYTE branch dist for not-taken
adds r2, r1, r1 @ convert to bytes, check sign
FETCH_ADVANCE_INST_RB(r2) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
cmp r0, #0
bne common_updateProfile
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_EQZ: /* 0x38 */
/* File: armv5te/OP_IF_EQZ.S */
/* File: armv5te/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG(r2, r0) @ r2<- vAA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, #0 @ compare (vA, 0)
movne r1, #2 @ r1<- inst branch dist for not-taken
adds r1, r1, r1 @ convert to bytes & set flags
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
cmp r0,#0
bne common_updateProfile @ test for JIT off at target
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_NEZ: /* 0x39 */
/* File: armv5te/OP_IF_NEZ.S */
/* File: armv5te/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG(r2, r0) @ r2<- vAA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, #0 @ compare (vA, 0)
moveq r1, #2 @ r1<- inst branch dist for not-taken
adds r1, r1, r1 @ convert to bytes & set flags
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
cmp r0,#0
bne common_updateProfile @ test for JIT off at target
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_LTZ: /* 0x3a */
/* File: armv5te/OP_IF_LTZ.S */
/* File: armv5te/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG(r2, r0) @ r2<- vAA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, #0 @ compare (vA, 0)
movge r1, #2 @ r1<- inst branch dist for not-taken
adds r1, r1, r1 @ convert to bytes & set flags
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
cmp r0,#0
bne common_updateProfile @ test for JIT off at target
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_GEZ: /* 0x3b */
/* File: armv5te/OP_IF_GEZ.S */
/* File: armv5te/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG(r2, r0) @ r2<- vAA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, #0 @ compare (vA, 0)
movlt r1, #2 @ r1<- inst branch dist for not-taken
adds r1, r1, r1 @ convert to bytes & set flags
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
cmp r0,#0
bne common_updateProfile @ test for JIT off at target
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_GTZ: /* 0x3c */
/* File: armv5te/OP_IF_GTZ.S */
/* File: armv5te/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG(r2, r0) @ r2<- vAA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, #0 @ compare (vA, 0)
movle r1, #2 @ r1<- inst branch dist for not-taken
adds r1, r1, r1 @ convert to bytes & set flags
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
cmp r0,#0
bne common_updateProfile @ test for JIT off at target
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IF_LEZ: /* 0x3d */
/* File: armv5te/OP_IF_LEZ.S */
/* File: armv5te/zcmp.S */
/*
* Generic one-operand compare-and-branch operation. Provide a "revcmp"
* fragment that specifies the *reverse* comparison to perform, e.g.
* for "if-le" you would use "gt".
*
* for: if-eqz, if-nez, if-ltz, if-gez, if-gtz, if-lez
*/
/* if-cmp vAA, +BBBB */
mov r0, rINST, lsr #8 @ r0<- AA
GET_VREG(r2, r0) @ r2<- vAA
FETCH_S(r1, 1) @ r1<- branch offset, in code units
cmp r2, #0 @ compare (vA, 0)
movgt r1, #2 @ r1<- inst branch dist for not-taken
adds r1, r1, r1 @ convert to bytes & set flags
FETCH_ADVANCE_INST_RB(r1) @ update rPC, load rINST
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
cmp r0,#0
bne common_updateProfile @ test for JIT off at target
#else
ldrmi rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh table base
#endif
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_3E: /* 0x3e */
/* File: armv5te/OP_UNUSED_3E.S */
/* File: armv5te/unused.S */
bl common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_3F: /* 0x3f */
/* File: armv5te/OP_UNUSED_3F.S */
/* File: armv5te/unused.S */
bl common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_40: /* 0x40 */
/* File: armv5te/OP_UNUSED_40.S */
/* File: armv5te/unused.S */
bl common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_41: /* 0x41 */
/* File: armv5te/OP_UNUSED_41.S */
/* File: armv5te/unused.S */
bl common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_42: /* 0x42 */
/* File: armv5te/OP_UNUSED_42.S */
/* File: armv5te/unused.S */
bl common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_43: /* 0x43 */
/* File: armv5te/OP_UNUSED_43.S */
/* File: armv5te/unused.S */
bl common_abort
/* ------------------------------ */
.balign 64
.L_OP_AGET: /* 0x44 */
/* File: armv5te/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #2 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldr r2, [r0, #offArrayObject_contents] @ r2<- vBB[vCC]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r9) @ vAA<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_AGET_WIDE: /* 0x45 */
/* File: armv5te/OP_AGET_WIDE.S */
/*
* Array get, 64 bits. vAA <- vBB[vCC].
*
* Arrays of long/double are 64-bit aligned, so it's okay to use LDRD.
*/
/* aget-wide vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #3 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcc .LOP_AGET_WIDE_finish @ okay, continue below
b common_errArrayIndex @ index >= length, bail
@ May want to swap the order of these two branches depending on how the
@ branch prediction (if any) handles conditional forward branches vs.
@ unconditional forward branches.
/* ------------------------------ */
.balign 64
.L_OP_AGET_OBJECT: /* 0x46 */
/* File: armv5te/OP_AGET_OBJECT.S */
/* File: armv5te/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #2 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldr r2, [r0, #offArrayObject_contents] @ r2<- vBB[vCC]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r9) @ vAA<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_AGET_BOOLEAN: /* 0x47 */
/* File: armv5te/OP_AGET_BOOLEAN.S */
/* File: armv5te/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #0 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldrb r2, [r0, #offArrayObject_contents] @ r2<- vBB[vCC]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r9) @ vAA<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_AGET_BYTE: /* 0x48 */
/* File: armv5te/OP_AGET_BYTE.S */
/* File: armv5te/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #0 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldrsb r2, [r0, #offArrayObject_contents] @ r2<- vBB[vCC]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r9) @ vAA<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_AGET_CHAR: /* 0x49 */
/* File: armv5te/OP_AGET_CHAR.S */
/* File: armv5te/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #1 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldrh r2, [r0, #offArrayObject_contents] @ r2<- vBB[vCC]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r9) @ vAA<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_AGET_SHORT: /* 0x4a */
/* File: armv5te/OP_AGET_SHORT.S */
/* File: armv5te/OP_AGET.S */
/*
* Array get, 32 bits or less. vAA <- vBB[vCC].
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aget, aget-object, aget-boolean, aget-byte, aget-char, aget-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #1 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldrsh r2, [r0, #offArrayObject_contents] @ r2<- vBB[vCC]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r2, r9) @ vAA<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_APUT: /* 0x4b */
/* File: armv5te/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #2 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r2, r9) @ r2<- vAA
GET_INST_OPCODE(ip) @ extract opcode from rINST
str r2, [r0, #offArrayObject_contents] @ vBB[vCC]<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_APUT_WIDE: /* 0x4c */
/* File: armv5te/OP_APUT_WIDE.S */
/*
* Array put, 64 bits. vBB[vCC] <- vAA.
*
* Arrays of long/double are 64-bit aligned, so it's okay to use STRD.
*/
/* aput-wide vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #3 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
bcc .LOP_APUT_WIDE_finish @ okay, continue below
b common_errArrayIndex @ index >= length, bail
@ May want to swap the order of these two branches depending on how the
@ branch prediction (if any) handles conditional forward branches vs.
@ unconditional forward branches.
/* ------------------------------ */
.balign 64
.L_OP_APUT_OBJECT: /* 0x4d */
/* File: armv5te/OP_APUT_OBJECT.S */
/*
* Store an object into an array. vBB[vCC] <- vAA.
*/
/* op vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
GET_VREG(rINST, r2) @ rINST<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp rINST, #0 @ null array object?
GET_VREG(r9, r9) @ r9<- vAA
beq common_errNullObject @ yes, bail
ldr r3, [rINST, #offArrayObject_length] @ r3<- arrayObj->length
add r10, rINST, r1, lsl #2 @ r10<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcc .LOP_APUT_OBJECT_finish @ we're okay, continue on
b common_errArrayIndex @ index >= length, bail
/* ------------------------------ */
.balign 64
.L_OP_APUT_BOOLEAN: /* 0x4e */
/* File: armv5te/OP_APUT_BOOLEAN.S */
/* File: armv5te/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #0 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r2, r9) @ r2<- vAA
GET_INST_OPCODE(ip) @ extract opcode from rINST
strb r2, [r0, #offArrayObject_contents] @ vBB[vCC]<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_APUT_BYTE: /* 0x4f */
/* File: armv5te/OP_APUT_BYTE.S */
/* File: armv5te/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #0 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r2, r9) @ r2<- vAA
GET_INST_OPCODE(ip) @ extract opcode from rINST
strb r2, [r0, #offArrayObject_contents] @ vBB[vCC]<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_APUT_CHAR: /* 0x50 */
/* File: armv5te/OP_APUT_CHAR.S */
/* File: armv5te/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #1 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r2, r9) @ r2<- vAA
GET_INST_OPCODE(ip) @ extract opcode from rINST
strh r2, [r0, #offArrayObject_contents] @ vBB[vCC]<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_APUT_SHORT: /* 0x51 */
/* File: armv5te/OP_APUT_SHORT.S */
/* File: armv5te/OP_APUT.S */
/*
* Array put, 32 bits or less. vBB[vCC] <- vAA.
*
* Note: using the usual FETCH/and/shift stuff, this fits in exactly 17
* instructions. We use a pair of FETCH_Bs instead.
*
* for: aput, aput-boolean, aput-byte, aput-char, aput-short
*/
/* op vAA, vBB, vCC */
FETCH_B(r2, 1, 0) @ r2<- BB
mov r9, rINST, lsr #8 @ r9<- AA
FETCH_B(r3, 1, 1) @ r3<- CC
GET_VREG(r0, r2) @ r0<- vBB (array object)
GET_VREG(r1, r3) @ r1<- vCC (requested index)
cmp r0, #0 @ null array object?
beq common_errNullObject @ yes, bail
ldr r3, [r0, #offArrayObject_length] @ r3<- arrayObj->length
add r0, r0, r1, lsl #1 @ r0<- arrayObj + index*width
cmp r1, r3 @ compare unsigned index, length
bcs common_errArrayIndex @ index >= length, bail
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r2, r9) @ r2<- vAA
GET_INST_OPCODE(ip) @ extract opcode from rINST
strh r2, [r0, #offArrayObject_contents] @ vBB[vCC]<- r2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IGET: /* 0x52 */
/* File: armv6t2/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IGET_WIDE: /* 0x53 */
/* File: armv6t2/OP_IGET_WIDE.S */
/*
* Wide 32-bit instance field get.
*/
/* iget-wide vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_WIDE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_WIDE_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IGET_OBJECT: /* 0x54 */
/* File: armv5te/OP_IGET_OBJECT.S */
/* File: armv5te/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_OBJECT_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_OBJECT_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IGET_BOOLEAN: /* 0x55 */
/* File: armv5te/OP_IGET_BOOLEAN.S */
@include "armv5te/OP_IGET.S" { "load":"ldrb", "sqnum":"1" }
/* File: armv5te/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_BOOLEAN_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_BOOLEAN_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IGET_BYTE: /* 0x56 */
/* File: armv5te/OP_IGET_BYTE.S */
@include "armv5te/OP_IGET.S" { "load":"ldrsb", "sqnum":"2" }
/* File: armv5te/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_BYTE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_BYTE_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IGET_CHAR: /* 0x57 */
/* File: armv5te/OP_IGET_CHAR.S */
@include "armv5te/OP_IGET.S" { "load":"ldrh", "sqnum":"3" }
/* File: armv5te/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_CHAR_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_CHAR_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IGET_SHORT: /* 0x58 */
/* File: armv5te/OP_IGET_SHORT.S */
@include "armv5te/OP_IGET.S" { "load":"ldrsh", "sqnum":"4" }
/* File: armv5te/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_SHORT_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_SHORT_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IPUT: /* 0x59 */
/* File: armv6t2/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-object, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IPUT_WIDE: /* 0x5a */
/* File: armv6t2/OP_IPUT_WIDE.S */
/* iput-wide vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_WIDE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_WIDE_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IPUT_OBJECT: /* 0x5b */
/* File: armv5te/OP_IPUT_OBJECT.S */
/*
* 32-bit instance field put.
*
* for: iput-object, iput-object-volatile
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_OBJECT_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_OBJECT_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IPUT_BOOLEAN: /* 0x5c */
/* File: armv5te/OP_IPUT_BOOLEAN.S */
@include "armv5te/OP_IPUT.S" { "store":"strb", "sqnum":"1" }
/* File: armv5te/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_BOOLEAN_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_BOOLEAN_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IPUT_BYTE: /* 0x5d */
/* File: armv5te/OP_IPUT_BYTE.S */
@include "armv5te/OP_IPUT.S" { "store":"strb", "sqnum":"2" }
/* File: armv5te/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_BYTE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_BYTE_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IPUT_CHAR: /* 0x5e */
/* File: armv5te/OP_IPUT_CHAR.S */
@include "armv5te/OP_IPUT.S" { "store":"strh", "sqnum":"3" }
/* File: armv5te/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_CHAR_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_CHAR_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IPUT_SHORT: /* 0x5f */
/* File: armv5te/OP_IPUT_SHORT.S */
@include "armv5te/OP_IPUT.S" { "store":"strh", "sqnum":"4" }
/* File: armv5te/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_SHORT_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_SHORT_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_SGET: /* 0x60 */
/* File: armv5te/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_resolve @ yes, do resolve
.LOP_SGET_finish: @ field ptr in r0
ldr r1, [r0, #offStaticField_value] @ r1<- field value
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r2) @ fp[AA]<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SGET_WIDE: /* 0x61 */
/* File: armv5te/OP_SGET_WIDE.S */
/*
* 64-bit SGET handler.
*/
/* sget-wide vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_WIDE_resolve @ yes, do resolve
.LOP_SGET_WIDE_finish:
mov r9, rINST, lsr #8 @ r9<- AA
.if 0
add r0, r0, #offStaticField_value @ r0<- pointer to data
bl dvmQuasiAtomicRead64 @ r0/r1<- contents of field
.else
ldrd r0, [r0, #offStaticField_value] @ r0/r1<- field value (aligned)
.endif
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SGET_OBJECT: /* 0x62 */
/* File: armv5te/OP_SGET_OBJECT.S */
/* File: armv5te/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_OBJECT_resolve @ yes, do resolve
.LOP_SGET_OBJECT_finish: @ field ptr in r0
ldr r1, [r0, #offStaticField_value] @ r1<- field value
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r2) @ fp[AA]<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SGET_BOOLEAN: /* 0x63 */
/* File: armv5te/OP_SGET_BOOLEAN.S */
/* File: armv5te/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_BOOLEAN_resolve @ yes, do resolve
.LOP_SGET_BOOLEAN_finish: @ field ptr in r0
ldr r1, [r0, #offStaticField_value] @ r1<- field value
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r2) @ fp[AA]<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SGET_BYTE: /* 0x64 */
/* File: armv5te/OP_SGET_BYTE.S */
/* File: armv5te/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_BYTE_resolve @ yes, do resolve
.LOP_SGET_BYTE_finish: @ field ptr in r0
ldr r1, [r0, #offStaticField_value] @ r1<- field value
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r2) @ fp[AA]<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SGET_CHAR: /* 0x65 */
/* File: armv5te/OP_SGET_CHAR.S */
/* File: armv5te/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_CHAR_resolve @ yes, do resolve
.LOP_SGET_CHAR_finish: @ field ptr in r0
ldr r1, [r0, #offStaticField_value] @ r1<- field value
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r2) @ fp[AA]<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SGET_SHORT: /* 0x66 */
/* File: armv5te/OP_SGET_SHORT.S */
/* File: armv5te/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_SHORT_resolve @ yes, do resolve
.LOP_SGET_SHORT_finish: @ field ptr in r0
ldr r1, [r0, #offStaticField_value] @ r1<- field value
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r2) @ fp[AA]<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPUT: /* 0x67 */
/* File: armv5te/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SPUT_resolve @ yes, do resolve
.LOP_SPUT_finish: @ field ptr in r0
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r1, r2) @ r1<- fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
@ no-op @ releasing store
str r1, [r0, #offStaticField_value] @ field<- vAA
@ no-op
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPUT_WIDE: /* 0x68 */
/* File: armv5te/OP_SPUT_WIDE.S */
/*
* 64-bit SPUT handler.
*/
/* sput-wide vAA, field@BBBB */
ldr r0, [rSELF, #offThread_methodClassDex] @ r0<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r0, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
mov r9, rINST, lsr #8 @ r9<- AA
ldr r2, [r10, r1, lsl #2] @ r2<- resolved StaticField ptr
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
cmp r2, #0 @ is resolved entry null?
beq .LOP_SPUT_WIDE_resolve @ yes, do resolve
.LOP_SPUT_WIDE_finish: @ field ptr in r2, AA in r9
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
GET_INST_OPCODE(r10) @ extract opcode from rINST
.if 0
add r2, r2, #offStaticField_value @ r2<- pointer to data
bl dvmQuasiAtomicSwap64Sync @ stores r0/r1 into addr r2
.else
strd r0, [r2, #offStaticField_value] @ field<- vAA/vAA+1
.endif
GOTO_OPCODE(r10) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPUT_OBJECT: /* 0x69 */
/* File: armv5te/OP_SPUT_OBJECT.S */
/*
* 32-bit SPUT handler for objects
*
* for: sput-object, sput-object-volatile
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SPUT_OBJECT_resolve @ yes, do resolve
.LOP_SPUT_OBJECT_finish: @ field ptr in r0
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r1, r2) @ r1<- fp[AA]
ldr r2, [rSELF, #offThread_cardTable] @ r2<- card table base
ldr r9, [r0, #offField_clazz] @ r9<- field->clazz
GET_INST_OPCODE(ip) @ extract opcode from rINST
@ no-op @ releasing store
b .LOP_SPUT_OBJECT_end
/* ------------------------------ */
.balign 64
.L_OP_SPUT_BOOLEAN: /* 0x6a */
/* File: armv5te/OP_SPUT_BOOLEAN.S */
/* File: armv5te/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SPUT_BOOLEAN_resolve @ yes, do resolve
.LOP_SPUT_BOOLEAN_finish: @ field ptr in r0
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r1, r2) @ r1<- fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
@ no-op @ releasing store
str r1, [r0, #offStaticField_value] @ field<- vAA
@ no-op
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPUT_BYTE: /* 0x6b */
/* File: armv5te/OP_SPUT_BYTE.S */
/* File: armv5te/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SPUT_BYTE_resolve @ yes, do resolve
.LOP_SPUT_BYTE_finish: @ field ptr in r0
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r1, r2) @ r1<- fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
@ no-op @ releasing store
str r1, [r0, #offStaticField_value] @ field<- vAA
@ no-op
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPUT_CHAR: /* 0x6c */
/* File: armv5te/OP_SPUT_CHAR.S */
/* File: armv5te/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SPUT_CHAR_resolve @ yes, do resolve
.LOP_SPUT_CHAR_finish: @ field ptr in r0
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r1, r2) @ r1<- fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
@ no-op @ releasing store
str r1, [r0, #offStaticField_value] @ field<- vAA
@ no-op
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPUT_SHORT: /* 0x6d */
/* File: armv5te/OP_SPUT_SHORT.S */
/* File: armv5te/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SPUT_SHORT_resolve @ yes, do resolve
.LOP_SPUT_SHORT_finish: @ field ptr in r0
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r1, r2) @ r1<- fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
@ no-op @ releasing store
str r1, [r0, #offStaticField_value] @ field<- vAA
@ no-op
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_VIRTUAL: /* 0x6e */
/* File: armv5te/OP_INVOKE_VIRTUAL.S */
/*
* Handle a virtual method call.
*
* for: invoke-virtual, invoke-virtual/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResMethods] @ r3<- pDvmDex->pResMethods
FETCH(r10, 2) @ r10<- GFED or CCCC
ldr r0, [r3, r1, lsl #2] @ r0<- resolved baseMethod
.if (!0)
and r10, r10, #15 @ r10<- D (or stays CCCC)
.endif
cmp r0, #0 @ already resolved?
EXPORT_PC() @ must export for invoke
bne .LOP_INVOKE_VIRTUAL_continue @ yes, continue on
ldr r3, [rSELF, #offThread_method] @ r3<- self->method
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
mov r2, #METHOD_VIRTUAL @ resolver method type
bl dvmResolveMethod @ r0<- call(clazz, ref, flags)
cmp r0, #0 @ got null?
bne .LOP_INVOKE_VIRTUAL_continue @ no, continue
b common_exceptionThrown @ yes, handle exception
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_SUPER: /* 0x6f */
/* File: armv5te/OP_INVOKE_SUPER.S */
/*
* Handle a "super" method call.
*
* for: invoke-super, invoke-super/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
FETCH(r10, 2) @ r10<- GFED or CCCC
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
.if (!0)
and r10, r10, #15 @ r10<- D (or stays CCCC)
.endif
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResMethods] @ r3<- pDvmDex->pResMethods
GET_VREG(r9, r10) @ r9<- "this" ptr
ldr r0, [r3, r1, lsl #2] @ r0<- resolved baseMethod
cmp r9, #0 @ null "this"?
ldr r10, [rSELF, #offThread_method] @ r10<- current method
beq common_errNullObject @ null "this", throw exception
cmp r0, #0 @ already resolved?
ldr r10, [r10, #offMethod_clazz] @ r10<- method->clazz
EXPORT_PC() @ must export for invoke
bne .LOP_INVOKE_SUPER_continue @ resolved, continue on
b .LOP_INVOKE_SUPER_resolve @ do resolve now
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_DIRECT: /* 0x70 */
/* File: armv5te/OP_INVOKE_DIRECT.S */
/*
* Handle a direct method call.
*
* (We could defer the "is 'this' pointer null" test to the common
* method invocation code, and use a flag to indicate that static
* calls don't count. If we do this as part of copying the arguments
* out we could avoiding loading the first arg twice.)
*
* for: invoke-direct, invoke-direct/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResMethods] @ r3<- pDvmDex->pResMethods
FETCH(r10, 2) @ r10<- GFED or CCCC
ldr r0, [r3, r1, lsl #2] @ r0<- resolved methodToCall
.if (!0)
and r10, r10, #15 @ r10<- D (or stays CCCC)
.endif
cmp r0, #0 @ already resolved?
EXPORT_PC() @ must export for invoke
GET_VREG(r9, r10) @ r9<- "this" ptr
beq .LOP_INVOKE_DIRECT_resolve @ not resolved, do it now
.LOP_INVOKE_DIRECT_finish:
cmp r9, #0 @ null "this" ref?
bne common_invokeMethodNoRange @ r0=method, r9="this"
b common_errNullObject @ yes, throw exception
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_STATIC: /* 0x71 */
/* File: armv5te/OP_INVOKE_STATIC.S */
/*
* Handle a static method call.
*
* for: invoke-static, invoke-static/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResMethods] @ r3<- pDvmDex->pResMethods
mov r9, #0 @ null "this" in delay slot
ldr r0, [r3, r1, lsl #2] @ r0<- resolved methodToCall
#if defined(WITH_JIT)
add r10, r3, r1, lsl #2 @ r10<- &resolved_methodToCall
#endif
cmp r0, #0 @ already resolved?
EXPORT_PC() @ must export for invoke
bne common_invokeMethodNoRange @ yes, continue on
b .LOP_INVOKE_STATIC_resolve
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_INTERFACE: /* 0x72 */
/* File: armv5te/OP_INVOKE_INTERFACE.S */
/*
* Handle an interface method call.
*
* for: invoke-interface, invoke-interface/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
FETCH(r2, 2) @ r2<- FEDC or CCCC
FETCH(r1, 1) @ r1<- BBBB
.if (!0)
and r2, r2, #15 @ r2<- C (or stays CCCC)
.endif
EXPORT_PC() @ must export for invoke
GET_VREG(r9, r2) @ r9<- first arg ("this")
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- methodClassDex
cmp r9, #0 @ null obj?
ldr r2, [rSELF, #offThread_method] @ r2<- method
beq common_errNullObject @ yes, fail
ldr r0, [r9, #offObject_clazz] @ r0<- thisPtr->clazz
bl dvmFindInterfaceMethodInCache @ r0<- call(class, ref, method, dex)
cmp r0, #0 @ failed?
beq common_exceptionThrown @ yes, handle exception
b common_invokeMethodNoRange @ (r0=method, r9="this")
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_73: /* 0x73 */
/* File: armv5te/OP_UNUSED_73.S */
/* File: armv5te/unused.S */
bl common_abort
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_VIRTUAL_RANGE: /* 0x74 */
/* File: armv5te/OP_INVOKE_VIRTUAL_RANGE.S */
/* File: armv5te/OP_INVOKE_VIRTUAL.S */
/*
* Handle a virtual method call.
*
* for: invoke-virtual, invoke-virtual/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResMethods] @ r3<- pDvmDex->pResMethods
FETCH(r10, 2) @ r10<- GFED or CCCC
ldr r0, [r3, r1, lsl #2] @ r0<- resolved baseMethod
.if (!1)
and r10, r10, #15 @ r10<- D (or stays CCCC)
.endif
cmp r0, #0 @ already resolved?
EXPORT_PC() @ must export for invoke
bne .LOP_INVOKE_VIRTUAL_RANGE_continue @ yes, continue on
ldr r3, [rSELF, #offThread_method] @ r3<- self->method
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
mov r2, #METHOD_VIRTUAL @ resolver method type
bl dvmResolveMethod @ r0<- call(clazz, ref, flags)
cmp r0, #0 @ got null?
bne .LOP_INVOKE_VIRTUAL_RANGE_continue @ no, continue
b common_exceptionThrown @ yes, handle exception
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_SUPER_RANGE: /* 0x75 */
/* File: armv5te/OP_INVOKE_SUPER_RANGE.S */
/* File: armv5te/OP_INVOKE_SUPER.S */
/*
* Handle a "super" method call.
*
* for: invoke-super, invoke-super/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
FETCH(r10, 2) @ r10<- GFED or CCCC
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
.if (!1)
and r10, r10, #15 @ r10<- D (or stays CCCC)
.endif
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResMethods] @ r3<- pDvmDex->pResMethods
GET_VREG(r9, r10) @ r9<- "this" ptr
ldr r0, [r3, r1, lsl #2] @ r0<- resolved baseMethod
cmp r9, #0 @ null "this"?
ldr r10, [rSELF, #offThread_method] @ r10<- current method
beq common_errNullObject @ null "this", throw exception
cmp r0, #0 @ already resolved?
ldr r10, [r10, #offMethod_clazz] @ r10<- method->clazz
EXPORT_PC() @ must export for invoke
bne .LOP_INVOKE_SUPER_RANGE_continue @ resolved, continue on
b .LOP_INVOKE_SUPER_RANGE_resolve @ do resolve now
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_DIRECT_RANGE: /* 0x76 */
/* File: armv5te/OP_INVOKE_DIRECT_RANGE.S */
/* File: armv5te/OP_INVOKE_DIRECT.S */
/*
* Handle a direct method call.
*
* (We could defer the "is 'this' pointer null" test to the common
* method invocation code, and use a flag to indicate that static
* calls don't count. If we do this as part of copying the arguments
* out we could avoiding loading the first arg twice.)
*
* for: invoke-direct, invoke-direct/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResMethods] @ r3<- pDvmDex->pResMethods
FETCH(r10, 2) @ r10<- GFED or CCCC
ldr r0, [r3, r1, lsl #2] @ r0<- resolved methodToCall
.if (!1)
and r10, r10, #15 @ r10<- D (or stays CCCC)
.endif
cmp r0, #0 @ already resolved?
EXPORT_PC() @ must export for invoke
GET_VREG(r9, r10) @ r9<- "this" ptr
beq .LOP_INVOKE_DIRECT_RANGE_resolve @ not resolved, do it now
.LOP_INVOKE_DIRECT_RANGE_finish:
cmp r9, #0 @ null "this" ref?
bne common_invokeMethodRange @ r0=method, r9="this"
b common_errNullObject @ yes, throw exception
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_STATIC_RANGE: /* 0x77 */
/* File: armv5te/OP_INVOKE_STATIC_RANGE.S */
/* File: armv5te/OP_INVOKE_STATIC.S */
/*
* Handle a static method call.
*
* for: invoke-static, invoke-static/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- pDvmDex
FETCH(r1, 1) @ r1<- BBBB
ldr r3, [r3, #offDvmDex_pResMethods] @ r3<- pDvmDex->pResMethods
mov r9, #0 @ null "this" in delay slot
ldr r0, [r3, r1, lsl #2] @ r0<- resolved methodToCall
#if defined(WITH_JIT)
add r10, r3, r1, lsl #2 @ r10<- &resolved_methodToCall
#endif
cmp r0, #0 @ already resolved?
EXPORT_PC() @ must export for invoke
bne common_invokeMethodRange @ yes, continue on
b .LOP_INVOKE_STATIC_RANGE_resolve
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_INTERFACE_RANGE: /* 0x78 */
/* File: armv5te/OP_INVOKE_INTERFACE_RANGE.S */
/* File: armv5te/OP_INVOKE_INTERFACE.S */
/*
* Handle an interface method call.
*
* for: invoke-interface, invoke-interface/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
FETCH(r2, 2) @ r2<- FEDC or CCCC
FETCH(r1, 1) @ r1<- BBBB
.if (!1)
and r2, r2, #15 @ r2<- C (or stays CCCC)
.endif
EXPORT_PC() @ must export for invoke
GET_VREG(r9, r2) @ r9<- first arg ("this")
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- methodClassDex
cmp r9, #0 @ null obj?
ldr r2, [rSELF, #offThread_method] @ r2<- method
beq common_errNullObject @ yes, fail
ldr r0, [r9, #offObject_clazz] @ r0<- thisPtr->clazz
bl dvmFindInterfaceMethodInCache @ r0<- call(class, ref, method, dex)
cmp r0, #0 @ failed?
beq common_exceptionThrown @ yes, handle exception
b common_invokeMethodRange @ (r0=method, r9="this")
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_79: /* 0x79 */
/* File: armv5te/OP_UNUSED_79.S */
/* File: armv5te/unused.S */
bl common_abort
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_7A: /* 0x7a */
/* File: armv5te/OP_UNUSED_7A.S */
/* File: armv5te/unused.S */
bl common_abort
/* ------------------------------ */
.balign 64
.L_OP_NEG_INT: /* 0x7b */
/* File: armv6t2/OP_NEG_INT.S */
/* File: armv6t2/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r3) @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
rsb r0, r0, #0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 64
.L_OP_NOT_INT: /* 0x7c */
/* File: armv6t2/OP_NOT_INT.S */
/* File: armv6t2/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r3) @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
mvn r0, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 64
.L_OP_NEG_LONG: /* 0x7d */
/* File: armv6t2/OP_NEG_LONG.S */
/* File: armv6t2/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0/r1".
* This could be an ARM instruction or a function call.
*
* For: neg-long, not-long, neg-double, long-to-double, double-to-long
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r3, rFP, r3, lsl #2 @ r3<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- vAA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
rsbs r0, r0, #0 @ optional op; may set condition codes
rsc r1, r1, #0 @ r0/r1<- op, r2-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 64
.L_OP_NOT_LONG: /* 0x7e */
/* File: armv6t2/OP_NOT_LONG.S */
/* File: armv6t2/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0/r1".
* This could be an ARM instruction or a function call.
*
* For: neg-long, not-long, neg-double, long-to-double, double-to-long
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r3, rFP, r3, lsl #2 @ r3<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- vAA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
mvn r0, r0 @ optional op; may set condition codes
mvn r1, r1 @ r0/r1<- op, r2-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 64
.L_OP_NEG_FLOAT: /* 0x7f */
/* File: armv6t2/OP_NEG_FLOAT.S */
/* File: armv6t2/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r3) @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
add r0, r0, #0x80000000 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 64
.L_OP_NEG_DOUBLE: /* 0x80 */
/* File: armv6t2/OP_NEG_DOUBLE.S */
/* File: armv6t2/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0/r1".
* This could be an ARM instruction or a function call.
*
* For: neg-long, not-long, neg-double, long-to-double, double-to-long
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r3, rFP, r3, lsl #2 @ r3<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- vAA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
add r1, r1, #0x80000000 @ r0/r1<- op, r2-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_LONG: /* 0x81 */
/* File: armv6t2/OP_INT_TO_LONG.S */
/* File: armv6t2/unopWider.S */
/*
* Generic 32bit-to-64bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op r0", where
* "result" is a 64-bit quantity in r0/r1.
*
* For: int-to-long, int-to-double, float-to-long, float-to-double
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r3) @ r0<- vB
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
@ optional op; may set condition codes
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
mov r1, r0, asr #31 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vA/vA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 9-10 instructions */
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_FLOAT: /* 0x82 */
/* File: arm-vfp/OP_INT_TO_FLOAT.S */
/* File: arm-vfp/funop.S */
/*
* Generic 32-bit unary floating-point operation. Provide an "instr"
* line that specifies an instruction that performs "s1 = op s0".
*
* for: int-to-float, float-to-int
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
flds s0, [r3] @ s0<- vB
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r9, r9, #15 @ r9<- A
fsitos s1, s0 @ s1<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
fsts s1, [r9] @ vA<- s1
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_DOUBLE: /* 0x83 */
/* File: arm-vfp/OP_INT_TO_DOUBLE.S */
/* File: arm-vfp/funopWider.S */
/*
* Generic 32bit-to-64bit floating point unary operation. Provide an
* "instr" line that specifies an instruction that performs "d0 = op s0".
*
* For: int-to-double, float-to-double
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
flds s0, [r3] @ s0<- vB
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r9, r9, #15 @ r9<- A
fsitod d0, s0 @ d0<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
fstd d0, [r9] @ vA<- d0
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_LONG_TO_INT: /* 0x84 */
/* File: armv5te/OP_LONG_TO_INT.S */
/* we ignore the high word, making this equivalent to a 32-bit reg move */
/* File: armv5te/OP_MOVE.S */
/* for move, move-object, long-to-int */
/* op vA, vB */
mov r1, rINST, lsr #12 @ r1<- B from 15:12
mov r0, rINST, lsr #8 @ r0<- A from 11:8
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
GET_VREG(r2, r1) @ r2<- fp[B]
and r0, r0, #15
GET_INST_OPCODE(ip) @ ip<- opcode from rINST
SET_VREG(r2, r0) @ fp[A]<- r2
GOTO_OPCODE(ip) @ execute next instruction
/* ------------------------------ */
.balign 64
.L_OP_LONG_TO_FLOAT: /* 0x85 */
/* File: armv6t2/OP_LONG_TO_FLOAT.S */
/* File: armv6t2/unopNarrower.S */
/*
* Generic 64bit-to-32bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op r0/r1", where
* "result" is a 32-bit quantity in r0.
*
* For: long-to-float, double-to-int, double-to-float
*
* (This would work for long-to-int, but that instruction is actually
* an exact match for OP_MOVE.)
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r3, rFP, r3, lsl #2 @ r3<- &fp[B]
ldmia r3, {r0-r1} @ r0/r1<- vB/vB+1
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_l2f @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 9-10 instructions */
/* ------------------------------ */
.balign 64
.L_OP_LONG_TO_DOUBLE: /* 0x86 */
/* File: armv6t2/OP_LONG_TO_DOUBLE.S */
/* File: armv6t2/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0/r1".
* This could be an ARM instruction or a function call.
*
* For: neg-long, not-long, neg-double, long-to-double, double-to-long
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r3, rFP, r3, lsl #2 @ r3<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- vAA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_l2d @ r0/r1<- op, r2-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 64
.L_OP_FLOAT_TO_INT: /* 0x87 */
/* File: arm-vfp/OP_FLOAT_TO_INT.S */
/* File: arm-vfp/funop.S */
/*
* Generic 32-bit unary floating-point operation. Provide an "instr"
* line that specifies an instruction that performs "s1 = op s0".
*
* for: int-to-float, float-to-int
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
flds s0, [r3] @ s0<- vB
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r9, r9, #15 @ r9<- A
ftosizs s1, s0 @ s1<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
fsts s1, [r9] @ vA<- s1
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_FLOAT_TO_LONG: /* 0x88 */
/* File: armv6t2/OP_FLOAT_TO_LONG.S */
@include "armv6t2/unopWider.S" {"instr":"bl __aeabi_f2lz"}
/* File: armv6t2/unopWider.S */
/*
* Generic 32bit-to-64bit unary operation. Provide an "instr" line
* that specifies an instruction that performs "result = op r0", where
* "result" is a 64-bit quantity in r0/r1.
*
* For: int-to-long, int-to-double, float-to-long, float-to-double
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r3) @ r0<- vB
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
@ optional op; may set condition codes
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
bl f2l_doconv @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vA/vA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 9-10 instructions */
/* ------------------------------ */
.balign 64
.L_OP_FLOAT_TO_DOUBLE: /* 0x89 */
/* File: arm-vfp/OP_FLOAT_TO_DOUBLE.S */
/* File: arm-vfp/funopWider.S */
/*
* Generic 32bit-to-64bit floating point unary operation. Provide an
* "instr" line that specifies an instruction that performs "d0 = op s0".
*
* For: int-to-double, float-to-double
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
flds s0, [r3] @ s0<- vB
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r9, r9, #15 @ r9<- A
fcvtds d0, s0 @ d0<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
fstd d0, [r9] @ vA<- d0
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_DOUBLE_TO_INT: /* 0x8a */
/* File: arm-vfp/OP_DOUBLE_TO_INT.S */
/* File: arm-vfp/funopNarrower.S */
/*
* Generic 64bit-to-32bit unary floating point operation. Provide an
* "instr" line that specifies an instruction that performs "s0 = op d0".
*
* For: double-to-int, double-to-float
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
fldd d0, [r3] @ d0<- vB
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r9, r9, #15 @ r9<- A
ftosizd s0, d0 @ s0<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
fsts s0, [r9] @ vA<- s0
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_DOUBLE_TO_LONG: /* 0x8b */
/* File: armv6t2/OP_DOUBLE_TO_LONG.S */
@include "armv6t2/unopWide.S" {"instr":"bl __aeabi_d2lz"}
/* File: armv6t2/unopWide.S */
/*
* Generic 64-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0/r1".
* This could be an ARM instruction or a function call.
*
* For: neg-long, not-long, neg-double, long-to-double, double-to-long
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r3, rFP, r3, lsl #2 @ r3<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r3, {r0-r1} @ r0/r1<- vAA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
bl d2l_doconv @ r0/r1<- op, r2-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-11 instructions */
/* ------------------------------ */
.balign 64
.L_OP_DOUBLE_TO_FLOAT: /* 0x8c */
/* File: arm-vfp/OP_DOUBLE_TO_FLOAT.S */
/* File: arm-vfp/funopNarrower.S */
/*
* Generic 64bit-to-32bit unary floating point operation. Provide an
* "instr" line that specifies an instruction that performs "s0 = op d0".
*
* For: double-to-int, double-to-float
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
fldd d0, [r3] @ d0<- vB
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r9, r9, #15 @ r9<- A
fcvtsd s0, d0 @ s0<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
fsts s0, [r9] @ vA<- s0
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_BYTE: /* 0x8d */
/* File: armv6t2/OP_INT_TO_BYTE.S */
/* File: armv6t2/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r3) @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
sxtb r0, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_CHAR: /* 0x8e */
/* File: armv6t2/OP_INT_TO_CHAR.S */
/* File: armv6t2/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r3) @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
uxth r0, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 64
.L_OP_INT_TO_SHORT: /* 0x8f */
/* File: armv6t2/OP_INT_TO_SHORT.S */
/* File: armv6t2/unop.S */
/*
* Generic 32-bit unary operation. Provide an "instr" line that
* specifies an instruction that performs "result = op r0".
* This could be an ARM instruction or a function call.
*
* for: neg-int, not-int, neg-float, int-to-float, float-to-int,
* int-to-byte, int-to-char, int-to-short
*/
/* unop vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r3) @ r0<- vB
@ optional op; may set condition codes
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
sxth r0, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 8-9 instructions */
/* ------------------------------ */
.balign 64
.L_OP_ADD_INT: /* 0x90 */
/* File: armv5te/OP_ADD_INT.S */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
add r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SUB_INT: /* 0x91 */
/* File: armv5te/OP_SUB_INT.S */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
sub r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_MUL_INT: /* 0x92 */
/* File: armv5te/OP_MUL_INT.S */
/* must be "mul r0, r1, r0" -- "r0, r0, r1" is illegal */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
mul r0, r1, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_DIV_INT: /* 0x93 */
/* File: armv5te/OP_DIV_INT.S */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 1
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_idiv @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_REM_INT: /* 0x94 */
/* File: armv5te/OP_REM_INT.S */
/* idivmod returns quotient in r0 and remainder in r1 */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 1
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_idivmod @ r1<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r1, r9) @ vAA<- r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_AND_INT: /* 0x95 */
/* File: armv5te/OP_AND_INT.S */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
and r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_OR_INT: /* 0x96 */
/* File: armv5te/OP_OR_INT.S */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
orr r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_XOR_INT: /* 0x97 */
/* File: armv5te/OP_XOR_INT.S */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
eor r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SHL_INT: /* 0x98 */
/* File: armv5te/OP_SHL_INT.S */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asl r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SHR_INT: /* 0x99 */
/* File: armv5te/OP_SHR_INT.S */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_USHR_INT: /* 0x9a */
/* File: armv5te/OP_USHR_INT.S */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, lsr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_ADD_LONG: /* 0x9b */
/* File: armv5te/OP_ADD_LONG.S */
/* File: armv5te/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
adds r0, r0, r2 @ optional op; may set condition codes
adc r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SUB_LONG: /* 0x9c */
/* File: armv5te/OP_SUB_LONG.S */
/* File: armv5te/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
subs r0, r0, r2 @ optional op; may set condition codes
sbc r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 64
.L_OP_MUL_LONG: /* 0x9d */
/* File: armv5te/OP_MUL_LONG.S */
/*
* Signed 64-bit integer multiply.
*
* Consider WXxYZ (r1r0 x r3r2) with a long multiply:
* WX
* x YZ
* --------
* ZW ZX
* YW YX
*
* The low word of the result holds ZX, the high word holds
* (ZW+YX) + (the high overflow from ZX). YW doesn't matter because
* it doesn't fit in the low 64 bits.
*
* Unlike most ARM math operations, multiply instructions have
* restrictions on using the same register more than once (Rd and Rm
* cannot be the same).
*/
/* mul-long vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
mul ip, r2, r1 @ ip<- ZxW
umull r9, r10, r2, r0 @ r9/r10 <- ZxX
mla r2, r0, r3, ip @ r2<- YxX + (ZxW)
mov r0, rINST, lsr #8 @ r0<- AA
add r10, r2, r10 @ r10<- r10 + low(ZxW + (YxX))
add r0, rFP, r0, lsl #2 @ r0<- &fp[AA]
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
b .LOP_MUL_LONG_finish
/* ------------------------------ */
.balign 64
.L_OP_DIV_LONG: /* 0x9e */
/* File: armv5te/OP_DIV_LONG.S */
/* File: armv5te/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 1
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_ldivmod @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 64
.L_OP_REM_LONG: /* 0x9f */
/* File: armv5te/OP_REM_LONG.S */
/* ldivmod returns quotient in r0/r1 and remainder in r2/r3 */
/* File: armv5te/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 1
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_ldivmod @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r2,r3} @ vAA/vAA+1<- r2/r3
GOTO_OPCODE(ip) @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 64
.L_OP_AND_LONG: /* 0xa0 */
/* File: armv5te/OP_AND_LONG.S */
/* File: armv5te/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r0, r0, r2 @ optional op; may set condition codes
and r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 64
.L_OP_OR_LONG: /* 0xa1 */
/* File: armv5te/OP_OR_LONG.S */
/* File: armv5te/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
orr r0, r0, r2 @ optional op; may set condition codes
orr r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 64
.L_OP_XOR_LONG: /* 0xa2 */
/* File: armv5te/OP_XOR_LONG.S */
/* File: armv5te/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
eor r0, r0, r2 @ optional op; may set condition codes
eor r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SHL_LONG: /* 0xa3 */
/* File: armv5te/OP_SHL_LONG.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance.
*/
/* shl-long vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r3, r0, #255 @ r3<- BB
mov r0, r0, lsr #8 @ r0<- CC
add r3, rFP, r3, lsl #2 @ r3<- &fp[BB]
GET_VREG(r2, r0) @ r2<- vCC
ldmia r3, {r0-r1} @ r0/r1<- vBB/vBB+1
and r2, r2, #63 @ r2<- r2 & 0x3f
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
mov r1, r1, asl r2 @ r1<- r1 << r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r1, r1, r0, lsr r3 @ r1<- r1 | (r0 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
movpl r1, r0, asl ip @ if r2 >= 32, r1<- r0 << (r2-32)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
b .LOP_SHL_LONG_finish
/* ------------------------------ */
.balign 64
.L_OP_SHR_LONG: /* 0xa4 */
/* File: armv5te/OP_SHR_LONG.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance.
*/
/* shr-long vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r3, r0, #255 @ r3<- BB
mov r0, r0, lsr #8 @ r0<- CC
add r3, rFP, r3, lsl #2 @ r3<- &fp[BB]
GET_VREG(r2, r0) @ r2<- vCC
ldmia r3, {r0-r1} @ r0/r1<- vBB/vBB+1
and r2, r2, #63 @ r0<- r0 & 0x3f
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
mov r0, r0, lsr r2 @ r0<- r2 >> r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
movpl r0, r1, asr ip @ if r2 >= 32, r0<-r1 >> (r2-32)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
b .LOP_SHR_LONG_finish
/* ------------------------------ */
.balign 64
.L_OP_USHR_LONG: /* 0xa5 */
/* File: armv5te/OP_USHR_LONG.S */
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to mask off the low
* 6 bits of the shift distance.
*/
/* ushr-long vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r3, r0, #255 @ r3<- BB
mov r0, r0, lsr #8 @ r0<- CC
add r3, rFP, r3, lsl #2 @ r3<- &fp[BB]
GET_VREG(r2, r0) @ r2<- vCC
ldmia r3, {r0-r1} @ r0/r1<- vBB/vBB+1
and r2, r2, #63 @ r0<- r0 & 0x3f
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
mov r0, r0, lsr r2 @ r0<- r2 >> r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
movpl r0, r1, lsr ip @ if r2 >= 32, r0<-r1 >>> (r2-32)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
b .LOP_USHR_LONG_finish
/* ------------------------------ */
.balign 64
.L_OP_ADD_FLOAT: /* 0xa6 */
/* File: arm-vfp/OP_ADD_FLOAT.S */
/* File: arm-vfp/fbinop.S */
/*
* Generic 32-bit floating-point operation. Provide an "instr" line that
* specifies an instruction that performs "s2 = s0 op s1". Because we
* use the "softfp" ABI, this must be an instruction, not a function call.
*
* For: add-float, sub-float, mul-float, div-float
*/
/* floatop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
flds s1, [r3] @ s1<- vCC
flds s0, [r2] @ s0<- vBB
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
fadds s2, s0, s1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vAA
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SUB_FLOAT: /* 0xa7 */
/* File: arm-vfp/OP_SUB_FLOAT.S */
/* File: arm-vfp/fbinop.S */
/*
* Generic 32-bit floating-point operation. Provide an "instr" line that
* specifies an instruction that performs "s2 = s0 op s1". Because we
* use the "softfp" ABI, this must be an instruction, not a function call.
*
* For: add-float, sub-float, mul-float, div-float
*/
/* floatop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
flds s1, [r3] @ s1<- vCC
flds s0, [r2] @ s0<- vBB
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
fsubs s2, s0, s1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vAA
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MUL_FLOAT: /* 0xa8 */
/* File: arm-vfp/OP_MUL_FLOAT.S */
/* File: arm-vfp/fbinop.S */
/*
* Generic 32-bit floating-point operation. Provide an "instr" line that
* specifies an instruction that performs "s2 = s0 op s1". Because we
* use the "softfp" ABI, this must be an instruction, not a function call.
*
* For: add-float, sub-float, mul-float, div-float
*/
/* floatop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
flds s1, [r3] @ s1<- vCC
flds s0, [r2] @ s0<- vBB
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
fmuls s2, s0, s1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vAA
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_DIV_FLOAT: /* 0xa9 */
/* File: arm-vfp/OP_DIV_FLOAT.S */
/* File: arm-vfp/fbinop.S */
/*
* Generic 32-bit floating-point operation. Provide an "instr" line that
* specifies an instruction that performs "s2 = s0 op s1". Because we
* use the "softfp" ABI, this must be an instruction, not a function call.
*
* For: add-float, sub-float, mul-float, div-float
*/
/* floatop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
flds s1, [r3] @ s1<- vCC
flds s0, [r2] @ s0<- vBB
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
fdivs s2, s0, s1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vAA
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_REM_FLOAT: /* 0xaa */
/* File: armv5te/OP_REM_FLOAT.S */
/* EABI doesn't define a float remainder function, but libm does */
/* File: armv5te/binop.S */
/*
* Generic 32-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus. Note that we
* *don't* check for (INT_MIN / -1) here, because the ARM math lib
* handles it correctly.
*
* For: add-int, sub-int, mul-int, div-int, rem-int, and-int, or-int,
* xor-int, shl-int, shr-int, ushr-int, add-float, sub-float,
* mul-float, div-float, rem-float
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
GET_VREG(r1, r3) @ r1<- vCC
GET_VREG(r0, r2) @ r0<- vBB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
bl fmodf @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 11-14 instructions */
/* ------------------------------ */
.balign 64
.L_OP_ADD_DOUBLE: /* 0xab */
/* File: arm-vfp/OP_ADD_DOUBLE.S */
/* File: arm-vfp/fbinopWide.S */
/*
* Generic 64-bit double-precision floating point binary operation.
* Provide an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* for: add-double, sub-double, mul-double, div-double
*/
/* doubleop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
fldd d1, [r3] @ d1<- vCC
fldd d0, [r2] @ d0<- vBB
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
faddd d2, d0, d1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vAA
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SUB_DOUBLE: /* 0xac */
/* File: arm-vfp/OP_SUB_DOUBLE.S */
/* File: arm-vfp/fbinopWide.S */
/*
* Generic 64-bit double-precision floating point binary operation.
* Provide an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* for: add-double, sub-double, mul-double, div-double
*/
/* doubleop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
fldd d1, [r3] @ d1<- vCC
fldd d0, [r2] @ d0<- vBB
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
fsubd d2, d0, d1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vAA
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MUL_DOUBLE: /* 0xad */
/* File: arm-vfp/OP_MUL_DOUBLE.S */
/* File: arm-vfp/fbinopWide.S */
/*
* Generic 64-bit double-precision floating point binary operation.
* Provide an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* for: add-double, sub-double, mul-double, div-double
*/
/* doubleop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
fldd d1, [r3] @ d1<- vCC
fldd d0, [r2] @ d0<- vBB
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
fmuld d2, d0, d1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vAA
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_DIV_DOUBLE: /* 0xae */
/* File: arm-vfp/OP_DIV_DOUBLE.S */
/* File: arm-vfp/fbinopWide.S */
/*
* Generic 64-bit double-precision floating point binary operation.
* Provide an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* for: add-double, sub-double, mul-double, div-double
*/
/* doubleop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
mov r3, r0, lsr #8 @ r3<- CC
and r2, r0, #255 @ r2<- BB
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vCC
VREG_INDEX_TO_ADDR(r2, r2) @ r2<- &vBB
fldd d1, [r3] @ d1<- vCC
fldd d0, [r2] @ d0<- vBB
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
fdivd d2, d0, d1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vAA
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_REM_DOUBLE: /* 0xaf */
/* File: armv5te/OP_REM_DOUBLE.S */
/* EABI doesn't define a double remainder function, but libm does */
/* File: armv5te/binopWide.S */
/*
* Generic 64-bit binary operation. Provide an "instr" line that
* specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* for: add-long, sub-long, div-long, rem-long, and-long, or-long,
* xor-long, add-double, sub-double, mul-double, div-double,
* rem-double
*
* IMPORTANT: you may specify "chkzero" or "preinstr" but not both.
*/
/* binop vAA, vBB, vCC */
FETCH(r0, 1) @ r0<- CCBB
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r0, #255 @ r2<- BB
mov r3, r0, lsr #8 @ r3<- CC
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
add r2, rFP, r2, lsl #2 @ r2<- &fp[BB]
add r3, rFP, r3, lsl #2 @ r3<- &fp[CC]
ldmia r2, {r0-r1} @ r0/r1<- vBB/vBB+1
ldmia r3, {r2-r3} @ r2/r3<- vCC/vCC+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
bl fmod @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 14-17 instructions */
/* ------------------------------ */
.balign 64
.L_OP_ADD_INT_2ADDR: /* 0xb0 */
/* File: armv6t2/OP_ADD_INT_2ADDR.S */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
add r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SUB_INT_2ADDR: /* 0xb1 */
/* File: armv6t2/OP_SUB_INT_2ADDR.S */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
sub r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_MUL_INT_2ADDR: /* 0xb2 */
/* File: armv6t2/OP_MUL_INT_2ADDR.S */
/* must be "mul r0, r1, r0" -- "r0, r0, r1" is illegal */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
mul r0, r1, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_DIV_INT_2ADDR: /* 0xb3 */
/* File: armv6t2/OP_DIV_INT_2ADDR.S */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 1
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_idiv @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_REM_INT_2ADDR: /* 0xb4 */
/* File: armv6t2/OP_REM_INT_2ADDR.S */
/* idivmod returns quotient in r0 and remainder in r1 */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 1
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_idivmod @ r1<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r1, r9) @ vAA<- r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_AND_INT_2ADDR: /* 0xb5 */
/* File: armv6t2/OP_AND_INT_2ADDR.S */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
and r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_OR_INT_2ADDR: /* 0xb6 */
/* File: armv6t2/OP_OR_INT_2ADDR.S */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
orr r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_XOR_INT_2ADDR: /* 0xb7 */
/* File: armv6t2/OP_XOR_INT_2ADDR.S */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
eor r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SHL_INT_2ADDR: /* 0xb8 */
/* File: armv6t2/OP_SHL_INT_2ADDR.S */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asl r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SHR_INT_2ADDR: /* 0xb9 */
/* File: armv6t2/OP_SHR_INT_2ADDR.S */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_USHR_INT_2ADDR: /* 0xba */
/* File: armv6t2/OP_USHR_INT_2ADDR.S */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, lsr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_ADD_LONG_2ADDR: /* 0xbb */
/* File: armv6t2/OP_ADD_LONG_2ADDR.S */
/* File: armv6t2/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r1, rFP, r1, lsl #2 @ r1<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
adds r0, r0, r2 @ optional op; may set condition codes
adc r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SUB_LONG_2ADDR: /* 0xbc */
/* File: armv6t2/OP_SUB_LONG_2ADDR.S */
/* File: armv6t2/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r1, rFP, r1, lsl #2 @ r1<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
subs r0, r0, r2 @ optional op; may set condition codes
sbc r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 64
.L_OP_MUL_LONG_2ADDR: /* 0xbd */
/* File: armv6t2/OP_MUL_LONG_2ADDR.S */
/*
* Signed 64-bit integer multiply, "/2addr" version.
*
* See OP_MUL_LONG for an explanation.
*
* We get a little tight on registers, so to avoid looking up &fp[A]
* again we stuff it into rINST.
*/
/* mul-long/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r1, rFP, r1, lsl #2 @ r1<- &fp[B]
add rINST, rFP, r9, lsl #2 @ rINST<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia rINST, {r0-r1} @ r0/r1<- vAA/vAA+1
mul ip, r2, r1 @ ip<- ZxW
umull r9, r10, r2, r0 @ r9/r10 <- ZxX
mla r2, r0, r3, ip @ r2<- YxX + (ZxW)
mov r0, rINST @ r0<- &fp[A] (free up rINST)
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
add r10, r2, r10 @ r10<- r10 + low(ZxW + (YxX))
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r0, {r9-r10} @ vAA/vAA+1<- r9/r10
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_DIV_LONG_2ADDR: /* 0xbe */
/* File: armv6t2/OP_DIV_LONG_2ADDR.S */
/* File: armv6t2/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r1, rFP, r1, lsl #2 @ r1<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 1
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_ldivmod @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 64
.L_OP_REM_LONG_2ADDR: /* 0xbf */
/* File: armv6t2/OP_REM_LONG_2ADDR.S */
/* ldivmod returns quotient in r0/r1 and remainder in r2/r3 */
/* File: armv6t2/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r1, rFP, r1, lsl #2 @ r1<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 1
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_ldivmod @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r2,r3} @ vAA/vAA+1<- r2/r3
GOTO_OPCODE(ip) @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 64
.L_OP_AND_LONG_2ADDR: /* 0xc0 */
/* File: armv6t2/OP_AND_LONG_2ADDR.S */
/* File: armv6t2/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r1, rFP, r1, lsl #2 @ r1<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
and r0, r0, r2 @ optional op; may set condition codes
and r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 64
.L_OP_OR_LONG_2ADDR: /* 0xc1 */
/* File: armv6t2/OP_OR_LONG_2ADDR.S */
/* File: armv6t2/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r1, rFP, r1, lsl #2 @ r1<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
orr r0, r0, r2 @ optional op; may set condition codes
orr r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 64
.L_OP_XOR_LONG_2ADDR: /* 0xc2 */
/* File: armv6t2/OP_XOR_LONG_2ADDR.S */
/* File: armv6t2/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r1, rFP, r1, lsl #2 @ r1<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
eor r0, r0, r2 @ optional op; may set condition codes
eor r1, r1, r3 @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SHL_LONG_2ADDR: /* 0xc3 */
/* File: armv6t2/OP_SHL_LONG_2ADDR.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* shl-long/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r2, r3) @ r2<- vB
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
and r2, r2, #63 @ r2<- r2 & 0x3f
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
mov r1, r1, asl r2 @ r1<- r1 << r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r1, r1, r0, lsr r3 @ r1<- r1 | (r0 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
movpl r1, r0, asl ip @ if r2 >= 32, r1<- r0 << (r2-32)
mov r0, r0, asl r2 @ r0<- r0 << r2
b .LOP_SHL_LONG_2ADDR_finish
/* ------------------------------ */
.balign 64
.L_OP_SHR_LONG_2ADDR: /* 0xc4 */
/* File: armv6t2/OP_SHR_LONG_2ADDR.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* shr-long/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r2, r3) @ r2<- vB
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
and r2, r2, #63 @ r2<- r2 & 0x3f
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
mov r0, r0, lsr r2 @ r0<- r2 >> r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
movpl r0, r1, asr ip @ if r2 >= 32, r0<-r1 >> (r2-32)
mov r1, r1, asr r2 @ r1<- r1 >> r2
b .LOP_SHR_LONG_2ADDR_finish
/* ------------------------------ */
.balign 64
.L_OP_USHR_LONG_2ADDR: /* 0xc5 */
/* File: armv6t2/OP_USHR_LONG_2ADDR.S */
/*
* Long integer shift, 2addr version. vA is 64-bit value/result, vB is
* 32-bit shift distance.
*/
/* ushr-long/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r2, r3) @ r2<- vB
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
and r2, r2, #63 @ r2<- r2 & 0x3f
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
mov r0, r0, lsr r2 @ r0<- r2 >> r2
rsb r3, r2, #32 @ r3<- 32 - r2
orr r0, r0, r1, asl r3 @ r0<- r0 | (r1 << (32-r2))
subs ip, r2, #32 @ ip<- r2 - 32
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
movpl r0, r1, lsr ip @ if r2 >= 32, r0<-r1 >>> (r2-32)
mov r1, r1, lsr r2 @ r1<- r1 >>> r2
b .LOP_USHR_LONG_2ADDR_finish
/* ------------------------------ */
.balign 64
.L_OP_ADD_FLOAT_2ADDR: /* 0xc6 */
/* File: arm-vfp/OP_ADD_FLOAT_2ADDR.S */
/* File: arm-vfp/fbinop2addr.S */
/*
* Generic 32-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "s2 = s0 op s1".
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
and r9, r9, #15 @ r9<- A
flds s1, [r3] @ s1<- vB
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
flds s0, [r9] @ s0<- vA
fadds s2, s0, s1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SUB_FLOAT_2ADDR: /* 0xc7 */
/* File: arm-vfp/OP_SUB_FLOAT_2ADDR.S */
/* File: arm-vfp/fbinop2addr.S */
/*
* Generic 32-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "s2 = s0 op s1".
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
and r9, r9, #15 @ r9<- A
flds s1, [r3] @ s1<- vB
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
flds s0, [r9] @ s0<- vA
fsubs s2, s0, s1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MUL_FLOAT_2ADDR: /* 0xc8 */
/* File: arm-vfp/OP_MUL_FLOAT_2ADDR.S */
/* File: arm-vfp/fbinop2addr.S */
/*
* Generic 32-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "s2 = s0 op s1".
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
and r9, r9, #15 @ r9<- A
flds s1, [r3] @ s1<- vB
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
flds s0, [r9] @ s0<- vA
fmuls s2, s0, s1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_DIV_FLOAT_2ADDR: /* 0xc9 */
/* File: arm-vfp/OP_DIV_FLOAT_2ADDR.S */
/* File: arm-vfp/fbinop2addr.S */
/*
* Generic 32-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "s2 = s0 op s1".
*
* For: add-float/2addr, sub-float/2addr, mul-float/2addr, div-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
and r9, r9, #15 @ r9<- A
flds s1, [r3] @ s1<- vB
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
flds s0, [r9] @ s0<- vA
fdivs s2, s0, s1 @ s2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
fsts s2, [r9] @ vAA<- s2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_REM_FLOAT_2ADDR: /* 0xca */
/* File: armv6t2/OP_REM_FLOAT_2ADDR.S */
/* EABI doesn't define a float remainder function, but libm does */
/* File: armv6t2/binop2addr.S */
/*
* Generic 32-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/2addr, sub-int/2addr, mul-int/2addr, div-int/2addr,
* rem-int/2addr, and-int/2addr, or-int/2addr, xor-int/2addr,
* shl-int/2addr, shr-int/2addr, ushr-int/2addr, add-float/2addr,
* sub-float/2addr, mul-float/2addr, div-float/2addr, rem-float/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r1, r3) @ r1<- vB
GET_VREG(r0, r9) @ r0<- vA
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
bl fmodf @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_ADD_DOUBLE_2ADDR: /* 0xcb */
/* File: arm-vfp/OP_ADD_DOUBLE_2ADDR.S */
/* File: arm-vfp/fbinopWide2addr.S */
/*
* Generic 64-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
and r9, r9, #15 @ r9<- A
fldd d1, [r3] @ d1<- vB
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
fldd d0, [r9] @ d0<- vA
faddd d2, d0, d1 @ d2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SUB_DOUBLE_2ADDR: /* 0xcc */
/* File: arm-vfp/OP_SUB_DOUBLE_2ADDR.S */
/* File: arm-vfp/fbinopWide2addr.S */
/*
* Generic 64-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
and r9, r9, #15 @ r9<- A
fldd d1, [r3] @ d1<- vB
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
fldd d0, [r9] @ d0<- vA
fsubd d2, d0, d1 @ d2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_MUL_DOUBLE_2ADDR: /* 0xcd */
/* File: arm-vfp/OP_MUL_DOUBLE_2ADDR.S */
/* File: arm-vfp/fbinopWide2addr.S */
/*
* Generic 64-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
and r9, r9, #15 @ r9<- A
fldd d1, [r3] @ d1<- vB
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
fldd d0, [r9] @ d0<- vA
fmuld d2, d0, d1 @ d2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_DIV_DOUBLE_2ADDR: /* 0xce */
/* File: arm-vfp/OP_DIV_DOUBLE_2ADDR.S */
/* File: arm-vfp/fbinopWide2addr.S */
/*
* Generic 64-bit floating point "/2addr" binary operation. Provide
* an "instr" line that specifies an instruction that performs
* "d2 = d0 op d1".
*
* For: add-double/2addr, sub-double/2addr, mul-double/2addr,
* div-double/2addr
*/
/* binop/2addr vA, vB */
mov r3, rINST, lsr #12 @ r3<- B
mov r9, rINST, lsr #8 @ r9<- A+
VREG_INDEX_TO_ADDR(r3, r3) @ r3<- &vB
and r9, r9, #15 @ r9<- A
fldd d1, [r3] @ d1<- vB
VREG_INDEX_TO_ADDR(r9, r9) @ r9<- &vA
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
fldd d0, [r9] @ d0<- vA
fdivd d2, d0, d1 @ d2<- op
GET_INST_OPCODE(ip) @ extract opcode from rINST
fstd d2, [r9] @ vAA<- d2
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_REM_DOUBLE_2ADDR: /* 0xcf */
/* File: armv6t2/OP_REM_DOUBLE_2ADDR.S */
/* EABI doesn't define a double remainder function, but libm does */
/* File: armv6t2/binopWide2addr.S */
/*
* Generic 64-bit "/2addr" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0-r1 op r2-r3".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-long/2addr, sub-long/2addr, div-long/2addr, rem-long/2addr,
* and-long/2addr, or-long/2addr, xor-long/2addr, add-double/2addr,
* sub-double/2addr, mul-double/2addr, div-double/2addr,
* rem-double/2addr
*/
/* binop/2addr vA, vB */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r9, rINST, #8, #4 @ r9<- A
add r1, rFP, r1, lsl #2 @ r1<- &fp[B]
add r9, rFP, r9, lsl #2 @ r9<- &fp[A]
ldmia r1, {r2-r3} @ r2/r3<- vBB/vBB+1
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
.if 0
orrs ip, r2, r3 @ second arg (r2-r3) is zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(1) @ advance rPC, load rINST
@ optional op; may set condition codes
bl fmod @ result<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0,r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 12-15 instructions */
/* ------------------------------ */
.balign 64
.L_OP_ADD_INT_LIT16: /* 0xd0 */
/* File: armv6t2/OP_ADD_INT_LIT16.S */
/* File: armv6t2/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S(r1, 1) @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r2) @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
add r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_RSUB_INT: /* 0xd1 */
/* File: armv6t2/OP_RSUB_INT.S */
/* this op is "rsub-int", but can be thought of as "rsub-int/lit16" */
/* File: armv6t2/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S(r1, 1) @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r2) @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
rsb r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_MUL_INT_LIT16: /* 0xd2 */
/* File: armv6t2/OP_MUL_INT_LIT16.S */
/* must be "mul r0, r1, r0" -- "r0, r0, r1" is illegal */
/* File: armv6t2/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S(r1, 1) @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r2) @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
mul r0, r1, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_DIV_INT_LIT16: /* 0xd3 */
/* File: armv6t2/OP_DIV_INT_LIT16.S */
/* File: armv6t2/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S(r1, 1) @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r2) @ r0<- vB
.if 1
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
bl __aeabi_idiv @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_REM_INT_LIT16: /* 0xd4 */
/* File: armv6t2/OP_REM_INT_LIT16.S */
/* idivmod returns quotient in r0 and remainder in r1 */
/* File: armv6t2/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S(r1, 1) @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r2) @ r0<- vB
.if 1
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
bl __aeabi_idivmod @ r1<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r1, r9) @ vAA<- r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_AND_INT_LIT16: /* 0xd5 */
/* File: armv6t2/OP_AND_INT_LIT16.S */
/* File: armv6t2/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S(r1, 1) @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r2) @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_OR_INT_LIT16: /* 0xd6 */
/* File: armv6t2/OP_OR_INT_LIT16.S */
/* File: armv6t2/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S(r1, 1) @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r2) @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
orr r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_XOR_INT_LIT16: /* 0xd7 */
/* File: armv6t2/OP_XOR_INT_LIT16.S */
/* File: armv6t2/binopLit16.S */
/*
* Generic 32-bit "lit16" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit16, rsub-int, mul-int/lit16, div-int/lit16,
* rem-int/lit16, and-int/lit16, or-int/lit16, xor-int/lit16
*/
/* binop/lit16 vA, vB, #+CCCC */
FETCH_S(r1, 1) @ r1<- ssssCCCC (sign-extended)
mov r2, rINST, lsr #12 @ r2<- B
ubfx r9, rINST, #8, #4 @ r9<- A
GET_VREG(r0, r2) @ r0<- vB
.if 0
cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
eor r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-13 instructions */
/* ------------------------------ */
.balign 64
.L_OP_ADD_INT_LIT8: /* 0xd8 */
/* File: armv5te/OP_ADD_INT_LIT8.S */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
add r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_RSUB_INT_LIT8: /* 0xd9 */
/* File: armv5te/OP_RSUB_INT_LIT8.S */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
rsb r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_MUL_INT_LIT8: /* 0xda */
/* File: armv5te/OP_MUL_INT_LIT8.S */
/* must be "mul r0, r1, r0" -- "r0, r0, r1" is illegal */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
mul r0, r1, r0 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_DIV_INT_LIT8: /* 0xdb */
/* File: armv5te/OP_DIV_INT_LIT8.S */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 1
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_idiv @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_REM_INT_LIT8: /* 0xdc */
/* File: armv5te/OP_REM_INT_LIT8.S */
/* idivmod returns quotient in r0 and remainder in r1 */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 1
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
bl __aeabi_idivmod @ r1<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r1, r9) @ vAA<- r1
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_AND_INT_LIT8: /* 0xdd */
/* File: armv5te/OP_AND_INT_LIT8.S */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
and r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_OR_INT_LIT8: /* 0xde */
/* File: armv5te/OP_OR_INT_LIT8.S */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
orr r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_XOR_INT_LIT8: /* 0xdf */
/* File: armv5te/OP_XOR_INT_LIT8.S */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ optional op; may set condition codes
eor r0, r0, r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SHL_INT_LIT8: /* 0xe0 */
/* File: armv5te/OP_SHL_INT_LIT8.S */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asl r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_SHR_INT_LIT8: /* 0xe1 */
/* File: armv5te/OP_SHR_INT_LIT8.S */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, asr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_USHR_INT_LIT8: /* 0xe2 */
/* File: armv5te/OP_USHR_INT_LIT8.S */
/* File: armv5te/binopLit8.S */
/*
* Generic 32-bit "lit8" binary operation. Provide an "instr" line
* that specifies an instruction that performs "result = r0 op r1".
* This could be an ARM instruction or a function call. (If the result
* comes back in a register other than r0, you can override "result".)
*
* If "chkzero" is set to 1, we perform a divide-by-zero check on
* vCC (r1). Useful for integer division and modulus.
*
* For: add-int/lit8, rsub-int/lit8, mul-int/lit8, div-int/lit8,
* rem-int/lit8, and-int/lit8, or-int/lit8, xor-int/lit8,
* shl-int/lit8, shr-int/lit8, ushr-int/lit8
*/
/* binop/lit8 vAA, vBB, #+CC */
FETCH_S(r3, 1) @ r3<- ssssCCBB (sign-extended for CC)
mov r9, rINST, lsr #8 @ r9<- AA
and r2, r3, #255 @ r2<- BB
GET_VREG(r0, r2) @ r0<- vBB
movs r1, r3, asr #8 @ r1<- ssssssCC (sign extended)
.if 0
@cmp r1, #0 @ is second operand zero?
beq common_errDivideByZero
.endif
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r1, r1, #31 @ optional op; may set condition codes
mov r0, r0, lsr r1 @ r0<- op, r0-r3 changed
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* 10-12 instructions */
/* ------------------------------ */
.balign 64
.L_OP_IGET_VOLATILE: /* 0xe3 */
/* File: armv5te/OP_IGET_VOLATILE.S */
/* File: armv5te/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_VOLATILE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_VOLATILE_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IPUT_VOLATILE: /* 0xe4 */
/* File: armv5te/OP_IPUT_VOLATILE.S */
/* File: armv5te/OP_IPUT.S */
/*
* General 32-bit instance field put.
*
* for: iput, iput-boolean, iput-byte, iput-char, iput-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_VOLATILE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_VOLATILE_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_SGET_VOLATILE: /* 0xe5 */
/* File: armv5te/OP_SGET_VOLATILE.S */
/* File: armv5te/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_VOLATILE_resolve @ yes, do resolve
.LOP_SGET_VOLATILE_finish: @ field ptr in r0
ldr r1, [r0, #offStaticField_value] @ r1<- field value
SMP_DMB @ acquiring load
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r2) @ fp[AA]<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPUT_VOLATILE: /* 0xe6 */
/* File: armv5te/OP_SPUT_VOLATILE.S */
/* File: armv5te/OP_SPUT.S */
/*
* General 32-bit SPUT handler.
*
* for: sput, sput-boolean, sput-byte, sput-char, sput-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SPUT_VOLATILE_resolve @ yes, do resolve
.LOP_SPUT_VOLATILE_finish: @ field ptr in r0
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r1, r2) @ r1<- fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
SMP_DMB_ST @ releasing store
str r1, [r0, #offStaticField_value] @ field<- vAA
SMP_DMB
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IGET_OBJECT_VOLATILE: /* 0xe7 */
/* File: armv5te/OP_IGET_OBJECT_VOLATILE.S */
/* File: armv5te/OP_IGET.S */
/*
* General 32-bit instance field get.
*
* for: iget, iget-object, iget-boolean, iget-byte, iget-char, iget-short
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_OBJECT_VOLATILE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_OBJECT_VOLATILE_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IGET_WIDE_VOLATILE: /* 0xe8 */
/* File: armv5te/OP_IGET_WIDE_VOLATILE.S */
/* File: armv5te/OP_IGET_WIDE.S */
/*
* Wide 32-bit instance field get.
*/
/* iget-wide vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IGET_WIDE_VOLATILE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0
bne .LOP_IGET_WIDE_VOLATILE_finish
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_IPUT_WIDE_VOLATILE: /* 0xe9 */
/* File: armv5te/OP_IPUT_WIDE_VOLATILE.S */
/* File: armv5te/OP_IPUT_WIDE.S */
/* iput-wide vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_WIDE_VOLATILE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_WIDE_VOLATILE_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_SGET_WIDE_VOLATILE: /* 0xea */
/* File: armv5te/OP_SGET_WIDE_VOLATILE.S */
/* File: armv5te/OP_SGET_WIDE.S */
/*
* 64-bit SGET handler.
*/
/* sget-wide vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_WIDE_VOLATILE_resolve @ yes, do resolve
.LOP_SGET_WIDE_VOLATILE_finish:
mov r9, rINST, lsr #8 @ r9<- AA
.if 1
add r0, r0, #offStaticField_value @ r0<- pointer to data
bl dvmQuasiAtomicRead64 @ r0/r1<- contents of field
.else
ldrd r0, [r0, #offStaticField_value] @ r0/r1<- field value (aligned)
.endif
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPUT_WIDE_VOLATILE: /* 0xeb */
/* File: armv5te/OP_SPUT_WIDE_VOLATILE.S */
/* File: armv5te/OP_SPUT_WIDE.S */
/*
* 64-bit SPUT handler.
*/
/* sput-wide vAA, field@BBBB */
ldr r0, [rSELF, #offThread_methodClassDex] @ r0<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r0, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
mov r9, rINST, lsr #8 @ r9<- AA
ldr r2, [r10, r1, lsl #2] @ r2<- resolved StaticField ptr
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
cmp r2, #0 @ is resolved entry null?
beq .LOP_SPUT_WIDE_VOLATILE_resolve @ yes, do resolve
.LOP_SPUT_WIDE_VOLATILE_finish: @ field ptr in r2, AA in r9
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldmia r9, {r0-r1} @ r0/r1<- vAA/vAA+1
GET_INST_OPCODE(r10) @ extract opcode from rINST
.if 1
add r2, r2, #offStaticField_value @ r2<- pointer to data
bl dvmQuasiAtomicSwap64Sync @ stores r0/r1 into addr r2
.else
strd r0, [r2, #offStaticField_value] @ field<- vAA/vAA+1
.endif
GOTO_OPCODE(r10) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_BREAKPOINT: /* 0xec */
/* File: armv5te/OP_BREAKPOINT.S */
/*
* Breakpoint handler.
*
* Restart this instruction with the original opcode. By
* the time we get here, the breakpoint will have already been
* handled.
*/
mov r0, rPC
bl dvmGetOriginalOpcode @ (rPC)
FETCH(rINST, 0) @ reload OP_BREAKPOINT + rest of inst
ldr r1, [rSELF, #offThread_mainHandlerTable]
and rINST, #0xff00
orr rINST, rINST, r0
GOTO_OPCODE_BASE(r1, r0)
/* ------------------------------ */
.balign 64
.L_OP_THROW_VERIFICATION_ERROR: /* 0xed */
/* File: armv5te/OP_THROW_VERIFICATION_ERROR.S */
/*
* Handle a throw-verification-error instruction. This throws an
* exception for an error discovered during verification. The
* exception is indicated by AA, with some detail provided by BBBB.
*/
/* op AA, ref@BBBB */
ldr r0, [rSELF, #offThread_method] @ r0<- self->method
FETCH(r2, 1) @ r2<- BBBB
EXPORT_PC() @ export the PC
mov r1, rINST, lsr #8 @ r1<- AA
bl dvmThrowVerificationError @ always throws
b common_exceptionThrown @ handle exception
/* ------------------------------ */
.balign 64
.L_OP_EXECUTE_INLINE: /* 0xee */
/* File: armv5te/OP_EXECUTE_INLINE.S */
/*
* Execute a "native inline" instruction.
*
* We need to call an InlineOp4Func:
* bool (func)(u4 arg0, u4 arg1, u4 arg2, u4 arg3, JValue* pResult)
*
* The first four args are in r0-r3, pointer to return value storage
* is on the stack. The function's return value is a flag that tells
* us if an exception was thrown.
*
* TUNING: could maintain two tables, pointer in Thread and
* swap if profiler/debuggger active.
*/
/* [opt] execute-inline vAA, {vC, vD, vE, vF}, inline@BBBB */
ldrh r2, [rSELF, #offThread_subMode]
FETCH(r10, 1) @ r10<- BBBB
EXPORT_PC() @ can throw
ands r2, #kSubModeDebugProfile @ Any going on?
bne .LOP_EXECUTE_INLINE_debugmode @ yes - take slow path
.LOP_EXECUTE_INLINE_resume:
add r1, rSELF, #offThread_retval @ r1<- &self->retval
sub sp, sp, #8 @ make room for arg, +64 bit align
mov r0, rINST, lsr #12 @ r0<- B
str r1, [sp] @ push &self->retval
bl .LOP_EXECUTE_INLINE_continue @ make call; will return after
add sp, sp, #8 @ pop stack
cmp r0, #0 @ test boolean result of inline
beq common_exceptionThrown @ returned false, handle exception
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_EXECUTE_INLINE_RANGE: /* 0xef */
/* File: armv5te/OP_EXECUTE_INLINE_RANGE.S */
/*
* Execute a "native inline" instruction, using "/range" semantics.
* Same idea as execute-inline, but we get the args differently.
*
* We need to call an InlineOp4Func:
* bool (func)(u4 arg0, u4 arg1, u4 arg2, u4 arg3, JValue* pResult)
*
* The first four args are in r0-r3, pointer to return value storage
* is on the stack. The function's return value is a flag that tells
* us if an exception was thrown.
*/
/* [opt] execute-inline/range {vCCCC..v(CCCC+AA-1)}, inline@BBBB */
ldrh r2, [rSELF, #offThread_subMode]
FETCH(r10, 1) @ r10<- BBBB
EXPORT_PC() @ can throw
ands r2, #kSubModeDebugProfile @ Any going on?
bne .LOP_EXECUTE_INLINE_RANGE_debugmode @ yes - take slow path
.LOP_EXECUTE_INLINE_RANGE_resume:
add r1, rSELF, #offThread_retval @ r1<- &self->retval
sub sp, sp, #8 @ make room for arg, +64 bit align
mov r0, rINST, lsr #8 @ r0<- AA
str r1, [sp] @ push &self->retval
bl .LOP_EXECUTE_INLINE_RANGE_continue @ make call; will return after
add sp, sp, #8 @ pop stack
cmp r0, #0 @ test boolean result of inline
beq common_exceptionThrown @ returned false, handle exception
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_OBJECT_INIT_RANGE: /* 0xf0 */
/* File: armv5te/OP_INVOKE_OBJECT_INIT_RANGE.S */
/*
* Invoke Object.<init> on an object. In practice we know that
* Object's nullary constructor doesn't do anything, so we just
* skip it unless a debugger is active.
*/
FETCH(r1, 2) @ r1<- CCCC
GET_VREG(r0, r1) @ r0<- "this" ptr
cmp r0, #0 @ check for NULL
beq common_errNullObject @ export PC and throw NPE
ldr r1, [r0, #offObject_clazz] @ r1<- obj->clazz
ldr r2, [r1, #offClassObject_accessFlags] @ r2<- clazz->accessFlags
tst r2, #CLASS_ISFINALIZABLE @ is this class finalizable?
bne .LOP_INVOKE_OBJECT_INIT_RANGE_setFinal @ yes, go
.LOP_INVOKE_OBJECT_INIT_RANGE_finish:
ldrh r1, [rSELF, #offThread_subMode]
ands r1, #kSubModeDebuggerActive @ debugger active?
bne .LOP_INVOKE_OBJECT_INIT_RANGE_debugger @ Yes - skip optimization
FETCH_ADVANCE_INST(2+1) @ advance to next instr, load rINST
GET_INST_OPCODE(ip) @ ip<- opcode from rINST
GOTO_OPCODE(ip) @ execute it
/* ------------------------------ */
.balign 64
.L_OP_RETURN_VOID_BARRIER: /* 0xf1 */
/* File: armv5te/OP_RETURN_VOID_BARRIER.S */
SMP_DMB_ST
b common_returnFromMethod
/* ------------------------------ */
.balign 64
.L_OP_IGET_QUICK: /* 0xf2 */
/* File: armv6t2/OP_IGET_QUICK.S */
/* For: iget-quick, iget-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH(r1, 1) @ r1<- field byte offset
GET_VREG(r3, r2) @ r3<- object we're operating on
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
ldr r0, [r3, r1] @ r0<- obj.field (always 32 bits)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IGET_WIDE_QUICK: /* 0xf3 */
/* File: armv6t2/OP_IGET_WIDE_QUICK.S */
/* iget-wide-quick vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH(ip, 1) @ ip<- field byte offset
GET_VREG(r3, r2) @ r3<- object we're operating on
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
ldrd r0, [r3, ip] @ r0<- obj.field (64 bits, aligned)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
add r3, rFP, r2, lsl #2 @ r3<- &fp[A]
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r3, {r0-r1} @ fp[A]<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IGET_OBJECT_QUICK: /* 0xf4 */
/* File: armv5te/OP_IGET_OBJECT_QUICK.S */
/* File: armv5te/OP_IGET_QUICK.S */
/* For: iget-quick, iget-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
GET_VREG(r3, r2) @ r3<- object we're operating on
FETCH(r1, 1) @ r1<- field byte offset
cmp r3, #0 @ check object for null
mov r2, rINST, lsr #8 @ r2<- A(+)
beq common_errNullObject @ object was null
ldr r0, [r3, r1] @ r0<- obj.field (always 32 bits)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IPUT_QUICK: /* 0xf5 */
/* File: armv6t2/OP_IPUT_QUICK.S */
/* For: iput-quick, iput-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
FETCH(r1, 1) @ r1<- field byte offset
GET_VREG(r3, r2) @ r3<- fp[B], the object pointer
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r3, #0 @ check object for null
beq common_errNullObject @ object was null
GET_VREG(r0, r2) @ r0<- fp[A]
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
str r0, [r3, r1] @ obj.field (always 32 bits)<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IPUT_WIDE_QUICK: /* 0xf6 */
/* File: armv6t2/OP_IPUT_WIDE_QUICK.S */
/* iput-wide-quick vA, vB, offset@CCCC */
mov r1, rINST, lsr #12 @ r1<- B
ubfx r0, rINST, #8, #4 @ r0<- A
GET_VREG(r2, r1) @ r2<- fp[B], the object pointer
add r3, rFP, r0, lsl #2 @ r3<- &fp[A]
cmp r2, #0 @ check object for null
ldmia r3, {r0-r1} @ r0/r1<- fp[A]
beq common_errNullObject @ object was null
FETCH(r3, 1) @ r3<- field byte offset
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
strd r0, [r2, r3] @ obj.field (64 bits, aligned)<- r0/r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_IPUT_OBJECT_QUICK: /* 0xf7 */
/* File: armv5te/OP_IPUT_OBJECT_QUICK.S */
/* For: iput-object-quick */
/* op vA, vB, offset@CCCC */
mov r2, rINST, lsr #12 @ r2<- B
GET_VREG(r3, r2) @ r3<- fp[B], the object pointer
FETCH(r1, 1) @ r1<- field byte offset
cmp r3, #0 @ check object for null
mov r2, rINST, lsr #8 @ r2<- A(+)
beq common_errNullObject @ object was null
and r2, r2, #15
GET_VREG(r0, r2) @ r0<- fp[A]
ldr r2, [rSELF, #offThread_cardTable] @ r2<- card table base
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
str r0, [r3, r1] @ obj.field (always 32 bits)<- r0
cmp r0, #0
strneb r2, [r2, r3, lsr #GC_CARD_SHIFT] @ mark card based on obj head
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_VIRTUAL_QUICK: /* 0xf8 */
/* File: armv5te/OP_INVOKE_VIRTUAL_QUICK.S */
/*
* Handle an optimized virtual method call.
*
* for: [opt] invoke-virtual-quick, invoke-virtual-quick/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
FETCH(r3, 2) @ r3<- FEDC or CCCC
FETCH(r1, 1) @ r1<- BBBB
.if (!0)
and r3, r3, #15 @ r3<- C (or stays CCCC)
.endif
GET_VREG(r9, r3) @ r9<- vC ("this" ptr)
cmp r9, #0 @ is "this" null?
beq common_errNullObject @ null "this", throw exception
ldr r2, [r9, #offObject_clazz] @ r2<- thisPtr->clazz
ldr r2, [r2, #offClassObject_vtable] @ r2<- thisPtr->clazz->vtable
EXPORT_PC() @ invoke must export
ldr r0, [r2, r1, lsl #2] @ r3<- vtable[BBBB]
bl common_invokeMethodNoRange @ (r0=method, r9="this")
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_VIRTUAL_QUICK_RANGE: /* 0xf9 */
/* File: armv5te/OP_INVOKE_VIRTUAL_QUICK_RANGE.S */
/* File: armv5te/OP_INVOKE_VIRTUAL_QUICK.S */
/*
* Handle an optimized virtual method call.
*
* for: [opt] invoke-virtual-quick, invoke-virtual-quick/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
FETCH(r3, 2) @ r3<- FEDC or CCCC
FETCH(r1, 1) @ r1<- BBBB
.if (!1)
and r3, r3, #15 @ r3<- C (or stays CCCC)
.endif
GET_VREG(r9, r3) @ r9<- vC ("this" ptr)
cmp r9, #0 @ is "this" null?
beq common_errNullObject @ null "this", throw exception
ldr r2, [r9, #offObject_clazz] @ r2<- thisPtr->clazz
ldr r2, [r2, #offClassObject_vtable] @ r2<- thisPtr->clazz->vtable
EXPORT_PC() @ invoke must export
ldr r0, [r2, r1, lsl #2] @ r3<- vtable[BBBB]
bl common_invokeMethodRange @ (r0=method, r9="this")
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_SUPER_QUICK: /* 0xfa */
/* File: armv5te/OP_INVOKE_SUPER_QUICK.S */
/*
* Handle an optimized "super" method call.
*
* for: [opt] invoke-super-quick, invoke-super-quick/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
FETCH(r10, 2) @ r10<- GFED or CCCC
ldr r2, [rSELF, #offThread_method] @ r2<- current method
.if (!0)
and r10, r10, #15 @ r10<- D (or stays CCCC)
.endif
FETCH(r1, 1) @ r1<- BBBB
ldr r2, [r2, #offMethod_clazz] @ r2<- method->clazz
EXPORT_PC() @ must export for invoke
ldr r2, [r2, #offClassObject_super] @ r2<- method->clazz->super
GET_VREG(r9, r10) @ r9<- "this"
ldr r2, [r2, #offClassObject_vtable] @ r2<- ...clazz->super->vtable
cmp r9, #0 @ null "this" ref?
ldr r0, [r2, r1, lsl #2] @ r0<- super->vtable[BBBB]
beq common_errNullObject @ "this" is null, throw exception
bl common_invokeMethodNoRange @ (r0=method, r9="this")
/* ------------------------------ */
.balign 64
.L_OP_INVOKE_SUPER_QUICK_RANGE: /* 0xfb */
/* File: armv5te/OP_INVOKE_SUPER_QUICK_RANGE.S */
/* File: armv5te/OP_INVOKE_SUPER_QUICK.S */
/*
* Handle an optimized "super" method call.
*
* for: [opt] invoke-super-quick, invoke-super-quick/range
*/
/* op vB, {vD, vE, vF, vG, vA}, class@CCCC */
/* op vAA, {vCCCC..v(CCCC+AA-1)}, meth@BBBB */
FETCH(r10, 2) @ r10<- GFED or CCCC
ldr r2, [rSELF, #offThread_method] @ r2<- current method
.if (!1)
and r10, r10, #15 @ r10<- D (or stays CCCC)
.endif
FETCH(r1, 1) @ r1<- BBBB
ldr r2, [r2, #offMethod_clazz] @ r2<- method->clazz
EXPORT_PC() @ must export for invoke
ldr r2, [r2, #offClassObject_super] @ r2<- method->clazz->super
GET_VREG(r9, r10) @ r9<- "this"
ldr r2, [r2, #offClassObject_vtable] @ r2<- ...clazz->super->vtable
cmp r9, #0 @ null "this" ref?
ldr r0, [r2, r1, lsl #2] @ r0<- super->vtable[BBBB]
beq common_errNullObject @ "this" is null, throw exception
bl common_invokeMethodRange @ (r0=method, r9="this")
/* ------------------------------ */
.balign 64
.L_OP_IPUT_OBJECT_VOLATILE: /* 0xfc */
/* File: armv5te/OP_IPUT_OBJECT_VOLATILE.S */
/* File: armv5te/OP_IPUT_OBJECT.S */
/*
* 32-bit instance field put.
*
* for: iput-object, iput-object-volatile
*/
/* op vA, vB, field@CCCC */
mov r0, rINST, lsr #12 @ r0<- B
ldr r3, [rSELF, #offThread_methodClassDex] @ r3<- DvmDex
FETCH(r1, 1) @ r1<- field ref CCCC
ldr r2, [r3, #offDvmDex_pResFields] @ r2<- pDvmDex->pResFields
GET_VREG(r9, r0) @ r9<- fp[B], the object pointer
ldr r0, [r2, r1, lsl #2] @ r0<- resolved InstField ptr
cmp r0, #0 @ is resolved entry null?
bne .LOP_IPUT_OBJECT_VOLATILE_finish @ no, already resolved
8: ldr r2, [rSELF, #offThread_method] @ r2<- current method
EXPORT_PC() @ resolve() could throw
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveInstField @ r0<- resolved InstField ptr
cmp r0, #0 @ success?
bne .LOP_IPUT_OBJECT_VOLATILE_finish @ yes, finish up
b common_exceptionThrown
/* ------------------------------ */
.balign 64
.L_OP_SGET_OBJECT_VOLATILE: /* 0xfd */
/* File: armv5te/OP_SGET_OBJECT_VOLATILE.S */
/* File: armv5te/OP_SGET.S */
/*
* General 32-bit SGET handler.
*
* for: sget, sget-object, sget-boolean, sget-byte, sget-char, sget-short
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SGET_OBJECT_VOLATILE_resolve @ yes, do resolve
.LOP_SGET_OBJECT_VOLATILE_finish: @ field ptr in r0
ldr r1, [r0, #offStaticField_value] @ r1<- field value
SMP_DMB @ acquiring load
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r2) @ fp[AA]<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* ------------------------------ */
.balign 64
.L_OP_SPUT_OBJECT_VOLATILE: /* 0xfe */
/* File: armv5te/OP_SPUT_OBJECT_VOLATILE.S */
/* File: armv5te/OP_SPUT_OBJECT.S */
/*
* 32-bit SPUT handler for objects
*
* for: sput-object, sput-object-volatile
*/
/* op vAA, field@BBBB */
ldr r2, [rSELF, #offThread_methodClassDex] @ r2<- DvmDex
FETCH(r1, 1) @ r1<- field ref BBBB
ldr r10, [r2, #offDvmDex_pResFields] @ r10<- dvmDex->pResFields
ldr r0, [r10, r1, lsl #2] @ r0<- resolved StaticField ptr
cmp r0, #0 @ is resolved entry null?
beq .LOP_SPUT_OBJECT_VOLATILE_resolve @ yes, do resolve
.LOP_SPUT_OBJECT_VOLATILE_finish: @ field ptr in r0
mov r2, rINST, lsr #8 @ r2<- AA
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
GET_VREG(r1, r2) @ r1<- fp[AA]
ldr r2, [rSELF, #offThread_cardTable] @ r2<- card table base
ldr r9, [r0, #offField_clazz] @ r9<- field->clazz
GET_INST_OPCODE(ip) @ extract opcode from rINST
SMP_DMB_ST @ releasing store
b .LOP_SPUT_OBJECT_VOLATILE_end
/* ------------------------------ */
.balign 64
.L_OP_UNUSED_FF: /* 0xff */
/* File: armv5te/OP_UNUSED_FF.S */
/* File: armv5te/unused.S */
bl common_abort
.balign 64
.size dvmAsmInstructionStart, .-dvmAsmInstructionStart
.global dvmAsmInstructionEnd
dvmAsmInstructionEnd:
/*
* ===========================================================================
* Sister implementations
* ===========================================================================
*/
.global dvmAsmSisterStart
.type dvmAsmSisterStart, %function
.text
.balign 4
dvmAsmSisterStart:
/* continuation for OP_CONST_STRING */
/*
* Continuation if the String has not yet been resolved.
* r1: BBBB (String ref)
* r9: target register
*/
.LOP_CONST_STRING_resolve:
EXPORT_PC()
ldr r0, [rSELF, #offThread_method] @ r0<- self->method
ldr r0, [r0, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveString @ r0<- String reference
cmp r0, #0 @ failed?
beq common_exceptionThrown @ yup, handle the exception
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r9) @ vAA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_CONST_STRING_JUMBO */
/*
* Continuation if the String has not yet been resolved.
* r1: BBBBBBBB (String ref)
* r9: target register
*/
.LOP_CONST_STRING_JUMBO_resolve:
EXPORT_PC()
ldr r0, [rSELF, #offThread_method] @ r0<- self->method
ldr r0, [r0, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveString @ r0<- String reference
cmp r0, #0 @ failed?
beq common_exceptionThrown @ yup, handle the exception
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
SET_VREG(r0, r9) @ vAA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_CONST_CLASS */
/*
* Continuation if the Class has not yet been resolved.
* r1: BBBB (Class ref)
* r9: target register
*/
.LOP_CONST_CLASS_resolve:
EXPORT_PC()
ldr r0, [rSELF, #offThread_method] @ r0<- self->method
mov r2, #1 @ r2<- true
ldr r0, [r0, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveClass @ r0<- Class reference
cmp r0, #0 @ failed?
beq common_exceptionThrown @ yup, handle the exception
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r9) @ vAA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_CHECK_CAST */
/*
* Trivial test failed, need to perform full check. This is common.
* r0 holds obj->clazz
* r1 holds desired class resolved from BBBB
* r9 holds object
*/
.LOP_CHECK_CAST_fullcheck:
mov r10, r1 @ avoid ClassObject getting clobbered
bl dvmInstanceofNonTrivial @ r0<- boolean result
cmp r0, #0 @ failed?
bne .LOP_CHECK_CAST_okay @ no, success
@ A cast has failed. We need to throw a ClassCastException.
EXPORT_PC() @ about to throw
ldr r0, [r9, #offObject_clazz] @ r0<- obj->clazz (actual class)
mov r1, r10 @ r1<- desired class
bl dvmThrowClassCastException
b common_exceptionThrown
/*
* Resolution required. This is the least-likely path.
*
* r2 holds BBBB
* r9 holds object
*/
.LOP_CHECK_CAST_resolve:
EXPORT_PC() @ resolve() could throw
ldr r3, [rSELF, #offThread_method] @ r3<- self->method
mov r1, r2 @ r1<- BBBB
mov r2, #0 @ r2<- false
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveClass @ r0<- resolved ClassObject ptr
cmp r0, #0 @ got null?
beq common_exceptionThrown @ yes, handle exception
mov r1, r0 @ r1<- class resolved from BBB
ldr r0, [r9, #offObject_clazz] @ r0<- obj->clazz
b .LOP_CHECK_CAST_resolved @ pick up where we left off
/* continuation for OP_INSTANCE_OF */
/*
* Trivial test failed, need to perform full check. This is common.
* r0 holds obj->clazz
* r1 holds class resolved from BBBB
* r9 holds A
*/
.LOP_INSTANCE_OF_fullcheck:
bl dvmInstanceofNonTrivial @ r0<- boolean result
@ fall through to OP_INSTANCE_OF_store
/*
* r0 holds boolean result
* r9 holds A
*/
.LOP_INSTANCE_OF_store:
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r9) @ vA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/*
* Trivial test succeeded, save and bail.
* r9 holds A
*/
.LOP_INSTANCE_OF_trivial:
mov r0, #1 @ indicate success
@ could b OP_INSTANCE_OF_store, but copying is faster and cheaper
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r9) @ vA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/*
* Resolution required. This is the least-likely path.
*
* r3 holds BBBB
* r9 holds A
*/
.LOP_INSTANCE_OF_resolve:
EXPORT_PC() @ resolve() could throw
ldr r0, [rSELF, #offThread_method] @ r0<- self->method
mov r1, r3 @ r1<- BBBB
mov r2, #1 @ r2<- true
ldr r0, [r0, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveClass @ r0<- resolved ClassObject ptr
cmp r0, #0 @ got null?
beq common_exceptionThrown @ yes, handle exception
mov r1, r0 @ r1<- class resolved from BBB
mov r3, rINST, lsr #12 @ r3<- B
GET_VREG(r0, r3) @ r0<- vB (object)
ldr r0, [r0, #offObject_clazz] @ r0<- obj->clazz
b .LOP_INSTANCE_OF_resolved @ pick up where we left off
/* continuation for OP_NEW_INSTANCE */
.balign 32 @ minimize cache lines
.LOP_NEW_INSTANCE_finish: @ r0=new object
mov r3, rINST, lsr #8 @ r3<- AA
cmp r0, #0 @ failed?
#if defined(WITH_JIT)
/*
* The JIT needs the class to be fully resolved before it can
* include this instruction in a trace.
*/
ldrh r1, [rSELF, #offThread_subMode]
beq common_exceptionThrown @ yes, handle the exception
ands r1, #kSubModeJitTraceBuild @ under construction?
bne .LOP_NEW_INSTANCE_jitCheck
#else
beq common_exceptionThrown @ yes, handle the exception
#endif
.LOP_NEW_INSTANCE_end:
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r3) @ vAA<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
#if defined(WITH_JIT)
/*
* Check to see if we need to stop the trace building early.
* r0: new object
* r3: vAA
*/
.LOP_NEW_INSTANCE_jitCheck:
ldr r1, [r10] @ reload resolved class
cmp r1, #0 @ okay?
bne .LOP_NEW_INSTANCE_end @ yes, finish
mov r9, r0 @ preserve new object
mov r10, r3 @ preserve vAA
mov r0, rSELF
mov r1, rPC
bl dvmJitEndTraceSelect @ (self, pc)
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r9, r10) @ vAA<- new object
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
#endif
/*
* Class initialization required.
*
* r0 holds class object
*/
.LOP_NEW_INSTANCE_needinit:
mov r9, r0 @ save r0
bl dvmInitClass @ initialize class
cmp r0, #0 @ check boolean result
mov r0, r9 @ restore r0
bne .LOP_NEW_INSTANCE_initialized @ success, continue
b common_exceptionThrown @ failed, deal with init exception
/*
* Resolution required. This is the least-likely path.
*
* r1 holds BBBB
*/
.LOP_NEW_INSTANCE_resolve:
ldr r3, [rSELF, #offThread_method] @ r3<- self->method
mov r2, #0 @ r2<- false
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveClass @ r0<- resolved ClassObject ptr
cmp r0, #0 @ got null?
bne .LOP_NEW_INSTANCE_resolved @ no, continue
b common_exceptionThrown @ yes, handle exception
/* continuation for OP_NEW_ARRAY */
/*
* Resolve class. (This is an uncommon case.)
*
* r1 holds array length
* r2 holds class ref CCCC
*/
.LOP_NEW_ARRAY_resolve:
ldr r3, [rSELF, #offThread_method] @ r3<- self->method
mov r9, r1 @ r9<- length (save)
mov r1, r2 @ r1<- CCCC
mov r2, #0 @ r2<- false
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveClass @ r0<- call(clazz, ref)
cmp r0, #0 @ got null?
mov r1, r9 @ r1<- length (restore)
beq common_exceptionThrown @ yes, handle exception
@ fall through to OP_NEW_ARRAY_finish
/*
* Finish allocation.
*
* r0 holds class
* r1 holds array length
*/
.LOP_NEW_ARRAY_finish:
mov r2, #ALLOC_DONT_TRACK @ don't track in local refs table
bl dvmAllocArrayByClass @ r0<- call(clazz, length, flags)
cmp r0, #0 @ failed?
mov r2, rINST, lsr #8 @ r2<- A+
beq common_exceptionThrown @ yes, handle the exception
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15 @ r2<- A
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ vA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_FILLED_NEW_ARRAY */
/*
* On entry:
* r0 holds array class
* r10 holds AA or BA
*/
.LOP_FILLED_NEW_ARRAY_continue:
ldr r3, [r0, #offClassObject_descriptor] @ r3<- arrayClass->descriptor
mov r2, #ALLOC_DONT_TRACK @ r2<- alloc flags
ldrb rINST, [r3, #1] @ rINST<- descriptor[1]
.if 0
mov r1, r10 @ r1<- AA (length)
.else
mov r1, r10, lsr #4 @ r1<- B (length)
.endif
cmp rINST, #'I' @ array of ints?
cmpne rINST, #'L' @ array of objects?
cmpne rINST, #'[' @ array of arrays?
mov r9, r1 @ save length in r9
bne .LOP_FILLED_NEW_ARRAY_notimpl @ no, not handled yet
bl dvmAllocArrayByClass @ r0<- call(arClass, length, flags)
cmp r0, #0 @ null return?
beq common_exceptionThrown @ alloc failed, handle exception
FETCH(r1, 2) @ r1<- FEDC or CCCC
str r0, [rSELF, #offThread_retval] @ retval.l <- new array
str rINST, [rSELF, #offThread_retval+4] @ retval.h <- type
add r0, r0, #offArrayObject_contents @ r0<- newArray->contents
subs r9, r9, #1 @ length--, check for neg
FETCH_ADVANCE_INST(3) @ advance to next instr, load rINST
bmi 2f @ was zero, bail
@ copy values from registers into the array
@ r0=array, r1=CCCC/FEDC, r9=length (from AA or B), r10=AA/BA
.if 0
add r2, rFP, r1, lsl #2 @ r2<- &fp[CCCC]
1: ldr r3, [r2], #4 @ r3<- *r2++
subs r9, r9, #1 @ count--
str r3, [r0], #4 @ *contents++ = vX
bpl 1b
@ continue at 2
.else
cmp r9, #4 @ length was initially 5?
and r2, r10, #15 @ r2<- A
bne 1f @ <= 4 args, branch
GET_VREG(r3, r2) @ r3<- vA
sub r9, r9, #1 @ count--
str r3, [r0, #16] @ contents[4] = vA
1: and r2, r1, #15 @ r2<- F/E/D/C
GET_VREG(r3, r2) @ r3<- vF/vE/vD/vC
mov r1, r1, lsr #4 @ r1<- next reg in low 4
subs r9, r9, #1 @ count--
str r3, [r0], #4 @ *contents++ = vX
bpl 1b
@ continue at 2
.endif
2:
ldr r0, [rSELF, #offThread_retval] @ r0<- object
ldr r1, [rSELF, #offThread_retval+4] @ r1<- type
ldr r2, [rSELF, #offThread_cardTable] @ r2<- card table base
GET_INST_OPCODE(ip) @ ip<- opcode from rINST
cmp r1, #'I' @ Is int array?
strneb r2, [r2, r0, lsr #GC_CARD_SHIFT] @ Mark card based on object head
GOTO_OPCODE(ip) @ execute it
/*
* Throw an exception indicating that we have not implemented this
* mode of filled-new-array.
*/
.LOP_FILLED_NEW_ARRAY_notimpl:
ldr r0, .L_strFilledNewArrayNotImpl_OP_FILLED_NEW_ARRAY
3: add r0, pc
bl dvmThrowInternalError
b common_exceptionThrown
/*
* Ideally we'd only define this once, but depending on layout we can
* exceed the range of the load above.
*/
.L_strFilledNewArrayNotImpl_OP_FILLED_NEW_ARRAY:
.word PCREL_REF(.LstrFilledNewArrayNotImpl,3b)
/* continuation for OP_FILLED_NEW_ARRAY_RANGE */
/*
* On entry:
* r0 holds array class
* r10 holds AA or BA
*/
.LOP_FILLED_NEW_ARRAY_RANGE_continue:
ldr r3, [r0, #offClassObject_descriptor] @ r3<- arrayClass->descriptor
mov r2, #ALLOC_DONT_TRACK @ r2<- alloc flags
ldrb rINST, [r3, #1] @ rINST<- descriptor[1]
.if 1
mov r1, r10 @ r1<- AA (length)
.else
mov r1, r10, lsr #4 @ r1<- B (length)
.endif
cmp rINST, #'I' @ array of ints?
cmpne rINST, #'L' @ array of objects?
cmpne rINST, #'[' @ array of arrays?
mov r9, r1 @ save length in r9
bne .LOP_FILLED_NEW_ARRAY_RANGE_notimpl @ no, not handled yet
bl dvmAllocArrayByClass @ r0<- call(arClass, length, flags)
cmp r0, #0 @ null return?
beq common_exceptionThrown @ alloc failed, handle exception
FETCH(r1, 2) @ r1<- FEDC or CCCC
str r0, [rSELF, #offThread_retval] @ retval.l <- new array
str rINST, [rSELF, #offThread_retval+4] @ retval.h <- type
add r0, r0, #offArrayObject_contents @ r0<- newArray->contents
subs r9, r9, #1 @ length--, check for neg
FETCH_ADVANCE_INST(3) @ advance to next instr, load rINST
bmi 2f @ was zero, bail
@ copy values from registers into the array
@ r0=array, r1=CCCC/FEDC, r9=length (from AA or B), r10=AA/BA
.if 1
add r2, rFP, r1, lsl #2 @ r2<- &fp[CCCC]
1: ldr r3, [r2], #4 @ r3<- *r2++
subs r9, r9, #1 @ count--
str r3, [r0], #4 @ *contents++ = vX
bpl 1b
@ continue at 2
.else
cmp r9, #4 @ length was initially 5?
and r2, r10, #15 @ r2<- A
bne 1f @ <= 4 args, branch
GET_VREG(r3, r2) @ r3<- vA
sub r9, r9, #1 @ count--
str r3, [r0, #16] @ contents[4] = vA
1: and r2, r1, #15 @ r2<- F/E/D/C
GET_VREG(r3, r2) @ r3<- vF/vE/vD/vC
mov r1, r1, lsr #4 @ r1<- next reg in low 4
subs r9, r9, #1 @ count--
str r3, [r0], #4 @ *contents++ = vX
bpl 1b
@ continue at 2
.endif
2:
ldr r0, [rSELF, #offThread_retval] @ r0<- object
ldr r1, [rSELF, #offThread_retval+4] @ r1<- type
ldr r2, [rSELF, #offThread_cardTable] @ r2<- card table base
GET_INST_OPCODE(ip) @ ip<- opcode from rINST
cmp r1, #'I' @ Is int array?
strneb r2, [r2, r0, lsr #GC_CARD_SHIFT] @ Mark card based on object head
GOTO_OPCODE(ip) @ execute it
/*
* Throw an exception indicating that we have not implemented this
* mode of filled-new-array.
*/
.LOP_FILLED_NEW_ARRAY_RANGE_notimpl:
ldr r0, .L_strFilledNewArrayNotImpl_OP_FILLED_NEW_ARRAY_RANGE
3: add r0, pc
bl dvmThrowInternalError
b common_exceptionThrown
/*
* Ideally we'd only define this once, but depending on layout we can
* exceed the range of the load above.
*/
.L_strFilledNewArrayNotImpl_OP_FILLED_NEW_ARRAY_RANGE:
.word PCREL_REF(.LstrFilledNewArrayNotImpl,3b)
/* continuation for OP_CMPL_FLOAT */
.LOP_CMPL_FLOAT_finish:
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_CMPG_FLOAT */
.LOP_CMPG_FLOAT_finish:
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_CMPL_DOUBLE */
.LOP_CMPL_DOUBLE_finish:
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_CMPG_DOUBLE */
.LOP_CMPG_DOUBLE_finish:
SET_VREG(r0, r9) @ vAA<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_CMP_LONG */
.LOP_CMP_LONG_less:
mvn r1, #0 @ r1<- -1
@ Want to cond code the next mov so we can avoid branch, but don't see it;
@ instead, we just replicate the tail end.
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r9) @ vAA<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
.LOP_CMP_LONG_greater:
mov r1, #1 @ r1<- 1
@ fall through to _finish
.LOP_CMP_LONG_finish:
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r1, r9) @ vAA<- r1
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_AGET_WIDE */
.LOP_AGET_WIDE_finish:
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldrd r2, [r0, #offArrayObject_contents] @ r2/r3<- vBB[vCC]
add r9, rFP, r9, lsl #2 @ r9<- &fp[AA]
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r2-r3} @ vAA/vAA+1<- r2/r3
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_APUT_WIDE */
.LOP_APUT_WIDE_finish:
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldmia r9, {r2-r3} @ r2/r3<- vAA/vAA+1
GET_INST_OPCODE(ip) @ extract opcode from rINST
strd r2, [r0, #offArrayObject_contents] @ r2/r3<- vBB[vCC]
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_APUT_OBJECT */
/*
* On entry:
* rINST = vBB (arrayObj)
* r9 = vAA (obj)
* r10 = offset into array (vBB + vCC * width)
*/
.LOP_APUT_OBJECT_finish:
cmp r9, #0 @ storing null reference?
beq .LOP_APUT_OBJECT_skip_check @ yes, skip type checks
ldr r0, [r9, #offObject_clazz] @ r0<- obj->clazz
ldr r1, [rINST, #offObject_clazz] @ r1<- arrayObj->clazz
bl dvmCanPutArrayElement @ test object type vs. array type
cmp r0, #0 @ okay?
beq .LOP_APUT_OBJECT_throw @ no
mov r1, rINST @ r1<- arrayObj
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldr r2, [rSELF, #offThread_cardTable] @ get biased CT base
add r10, #offArrayObject_contents @ r0<- pointer to slot
GET_INST_OPCODE(ip) @ extract opcode from rINST
str r9, [r10] @ vBB[vCC]<- vAA
strb r2, [r2, r1, lsr #GC_CARD_SHIFT] @ mark card using object head
GOTO_OPCODE(ip) @ jump to next instruction
.LOP_APUT_OBJECT_skip_check:
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
str r9, [r10, #offArrayObject_contents] @ vBB[vCC]<- vAA
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
.LOP_APUT_OBJECT_throw:
@ The types don't match. We need to throw an ArrayStoreException.
ldr r0, [r9, #offObject_clazz]
ldr r1, [rINST, #offObject_clazz]
EXPORT_PC()
bl dvmThrowArrayStoreExceptionIncompatibleElement
b common_exceptionThrown
/* continuation for OP_IGET */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_finish:
@bl common_squeak0
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
ldr r0, [r9, r3] @ r0<- obj.field (8/16/32 bits)
ubfx r2, rINST, #8, #4 @ r2<- A
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IGET_WIDE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_WIDE_finish:
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
ldrd r0, [r9, r3] @ r0/r1<- obj.field (64-bit align ok)
ubfx r2, rINST, #8, #4 @ r2<- A
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
add r3, rFP, r2, lsl #2 @ r3<- &fp[A]
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r3, {r0-r1} @ fp[A]<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IGET_OBJECT */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_OBJECT_finish:
@bl common_squeak0
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
ldr r0, [r9, r3] @ r0<- obj.field (8/16/32 bits)
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- A+
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15 @ r2<- A
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IGET_BOOLEAN */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_BOOLEAN_finish:
@bl common_squeak1
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
ldr r0, [r9, r3] @ r0<- obj.field (8/16/32 bits)
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- A+
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15 @ r2<- A
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IGET_BYTE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_BYTE_finish:
@bl common_squeak2
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
ldr r0, [r9, r3] @ r0<- obj.field (8/16/32 bits)
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- A+
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15 @ r2<- A
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IGET_CHAR */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_CHAR_finish:
@bl common_squeak3
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
ldr r0, [r9, r3] @ r0<- obj.field (8/16/32 bits)
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- A+
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15 @ r2<- A
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IGET_SHORT */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_SHORT_finish:
@bl common_squeak4
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
ldr r0, [r9, r3] @ r0<- obj.field (8/16/32 bits)
@ no-op @ acquiring load
mov r2, rINST, lsr #8 @ r2<- A+
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15 @ r2<- A
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IPUT */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_finish:
@bl common_squeak0
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
ubfx r1, rINST, #8, #4 @ r1<- A
cmp r9, #0 @ check object for null
GET_VREG(r0, r1) @ r0<- fp[A]
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
str r0, [r9, r3] @ obj.field (8/16/32 bits)<- r0
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IPUT_WIDE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_WIDE_finish:
ubfx r2, rINST, #8, #4 @ r2<- A
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
add r2, rFP, r2, lsl #2 @ r3<- &fp[A]
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldmia r2, {r0-r1} @ r0/r1<- fp[A]
GET_INST_OPCODE(ip) @ extract opcode from rINST
strd r0, [r9, r3] @ obj.field (64 bits, aligned)<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IPUT_OBJECT */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_OBJECT_finish:
@bl common_squeak0
mov r1, rINST, lsr #8 @ r1<- A+
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
and r1, r1, #15 @ r1<- A
cmp r9, #0 @ check object for null
GET_VREG(r0, r1) @ r0<- fp[A]
ldr r2, [rSELF, #offThread_cardTable] @ r2<- card table base
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ no-op @ releasing store
str r0, [r9, r3] @ obj.field (32 bits)<- r0
@ no-op
GET_INST_OPCODE(ip) @ extract opcode from rINST
cmp r0, #0 @ stored a null reference?
strneb r2, [r2, r9, lsr #GC_CARD_SHIFT] @ mark card if not
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IPUT_BOOLEAN */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_BOOLEAN_finish:
@bl common_squeak1
mov r1, rINST, lsr #8 @ r1<- A+
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
and r1, r1, #15 @ r1<- A
cmp r9, #0 @ check object for null
GET_VREG(r0, r1) @ r0<- fp[A]
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ no-op @ releasing store
str r0, [r9, r3] @ obj.field (8/16/32 bits)<- r0
@ no-op
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IPUT_BYTE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_BYTE_finish:
@bl common_squeak2
mov r1, rINST, lsr #8 @ r1<- A+
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
and r1, r1, #15 @ r1<- A
cmp r9, #0 @ check object for null
GET_VREG(r0, r1) @ r0<- fp[A]
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ no-op @ releasing store
str r0, [r9, r3] @ obj.field (8/16/32 bits)<- r0
@ no-op
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IPUT_CHAR */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_CHAR_finish:
@bl common_squeak3
mov r1, rINST, lsr #8 @ r1<- A+
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
and r1, r1, #15 @ r1<- A
cmp r9, #0 @ check object for null
GET_VREG(r0, r1) @ r0<- fp[A]
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ no-op @ releasing store
str r0, [r9, r3] @ obj.field (8/16/32 bits)<- r0
@ no-op
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IPUT_SHORT */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_SHORT_finish:
@bl common_squeak4
mov r1, rINST, lsr #8 @ r1<- A+
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
and r1, r1, #15 @ r1<- A
cmp r9, #0 @ check object for null
GET_VREG(r0, r1) @ r0<- fp[A]
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
@ no-op @ releasing store
str r0, [r9, r3] @ obj.field (8/16/32 bits)<- r0
@ no-op
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_SGET */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SGET_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_finish
/* continuation for OP_SGET_WIDE */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*
* Returns StaticField pointer in r0.
*/
.LOP_SGET_WIDE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r1<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_WIDE_finish @ resume
/* continuation for OP_SGET_OBJECT */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SGET_OBJECT_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_OBJECT_finish
/* continuation for OP_SGET_BOOLEAN */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SGET_BOOLEAN_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_BOOLEAN_finish
/* continuation for OP_SGET_BYTE */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SGET_BYTE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_BYTE_finish
/* continuation for OP_SGET_CHAR */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SGET_CHAR_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_CHAR_finish
/* continuation for OP_SGET_SHORT */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SGET_SHORT_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_SHORT_finish
/* continuation for OP_SPUT */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SPUT_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_finish @ resume
/* continuation for OP_SPUT_WIDE */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r9: &fp[AA]
* r10: dvmDex->pResFields
*
* Returns StaticField pointer in r2.
*/
.LOP_SPUT_WIDE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
mov r2, r0 @ copy to r2
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_WIDE_finish @ resume
/* continuation for OP_SPUT_OBJECT */
.LOP_SPUT_OBJECT_end:
str r1, [r0, #offStaticField_value] @ field<- vAA
@ no-op
cmp r1, #0 @ stored a null object?
strneb r2, [r2, r9, lsr #GC_CARD_SHIFT] @ mark card based on obj head
GOTO_OPCODE(ip) @ jump to next instruction
/* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SPUT_OBJECT_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_OBJECT_finish @ resume
/* continuation for OP_SPUT_BOOLEAN */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SPUT_BOOLEAN_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_BOOLEAN_finish @ resume
/* continuation for OP_SPUT_BYTE */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SPUT_BYTE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_BYTE_finish @ resume
/* continuation for OP_SPUT_CHAR */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SPUT_CHAR_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_CHAR_finish @ resume
/* continuation for OP_SPUT_SHORT */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SPUT_SHORT_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_SHORT_finish @ resume
/* continuation for OP_INVOKE_VIRTUAL */
/*
* At this point:
* r0 = resolved base method
* r10 = C or CCCC (index of first arg, which is the "this" ptr)
*/
.LOP_INVOKE_VIRTUAL_continue:
GET_VREG(r9, r10) @ r9<- "this" ptr
ldrh r2, [r0, #offMethod_methodIndex] @ r2<- baseMethod->methodIndex
cmp r9, #0 @ is "this" null?
beq common_errNullObject @ null "this", throw exception
ldr r3, [r9, #offObject_clazz] @ r3<- thisPtr->clazz
ldr r3, [r3, #offClassObject_vtable] @ r3<- thisPtr->clazz->vtable
ldr r0, [r3, r2, lsl #2] @ r3<- vtable[methodIndex]
bl common_invokeMethodNoRange @ (r0=method, r9="this")
/* continuation for OP_INVOKE_SUPER */
/*
* At this point:
* r0 = resolved base method
* r10 = method->clazz
*/
.LOP_INVOKE_SUPER_continue:
ldr r1, [r10, #offClassObject_super] @ r1<- method->clazz->super
ldrh r2, [r0, #offMethod_methodIndex] @ r2<- baseMethod->methodIndex
ldr r3, [r1, #offClassObject_vtableCount] @ r3<- super->vtableCount
EXPORT_PC() @ must export for invoke
cmp r2, r3 @ compare (methodIndex, vtableCount)
bcs .LOP_INVOKE_SUPER_nsm @ method not present in superclass
ldr r1, [r1, #offClassObject_vtable] @ r1<- ...clazz->super->vtable
ldr r0, [r1, r2, lsl #2] @ r3<- vtable[methodIndex]
bl common_invokeMethodNoRange @ continue on
.LOP_INVOKE_SUPER_resolve:
mov r0, r10 @ r0<- method->clazz
mov r2, #METHOD_VIRTUAL @ resolver method type
bl dvmResolveMethod @ r0<- call(clazz, ref, flags)
cmp r0, #0 @ got null?
bne .LOP_INVOKE_SUPER_continue @ no, continue
b common_exceptionThrown @ yes, handle exception
/*
* Throw a NoSuchMethodError with the method name as the message.
* r0 = resolved base method
*/
.LOP_INVOKE_SUPER_nsm:
ldr r1, [r0, #offMethod_name] @ r1<- method name
b common_errNoSuchMethod
/* continuation for OP_INVOKE_DIRECT */
/*
* On entry:
* r1 = reference (BBBB or CCCC)
* r10 = "this" register
*/
.LOP_INVOKE_DIRECT_resolve:
ldr r3, [rSELF, #offThread_method] @ r3<- self->method
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
mov r2, #METHOD_DIRECT @ resolver method type
bl dvmResolveMethod @ r0<- call(clazz, ref, flags)
cmp r0, #0 @ got null?
bne .LOP_INVOKE_DIRECT_finish @ no, continue
b common_exceptionThrown @ yes, handle exception
/* continuation for OP_INVOKE_STATIC */
.LOP_INVOKE_STATIC_resolve:
ldr r3, [rSELF, #offThread_method] @ r3<- self->method
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
mov r2, #METHOD_STATIC @ resolver method type
bl dvmResolveMethod @ r0<- call(clazz, ref, flags)
cmp r0, #0 @ got null?
#if defined(WITH_JIT)
/*
* Check to see if we're actively building a trace. If so,
* we need to keep this instruction out of it.
* r10: &resolved_methodToCall
*/
ldrh r2, [rSELF, #offThread_subMode]
beq common_exceptionThrown @ null, handle exception
ands r2, #kSubModeJitTraceBuild @ trace under construction?
beq common_invokeMethodNoRange @ no (r0=method, r9="this")
ldr r1, [r10] @ reload resolved method
cmp r1, #0 @ finished resolving?
bne common_invokeMethodNoRange @ yes (r0=method, r9="this")
mov r10, r0 @ preserve method
mov r0, rSELF
mov r1, rPC
bl dvmJitEndTraceSelect @ (self, pc)
mov r0, r10
b common_invokeMethodNoRange @ whew, finally!
#else
bne common_invokeMethodNoRange @ (r0=method, r9="this")
b common_exceptionThrown @ yes, handle exception
#endif
/* continuation for OP_INVOKE_VIRTUAL_RANGE */
/*
* At this point:
* r0 = resolved base method
* r10 = C or CCCC (index of first arg, which is the "this" ptr)
*/
.LOP_INVOKE_VIRTUAL_RANGE_continue:
GET_VREG(r9, r10) @ r9<- "this" ptr
ldrh r2, [r0, #offMethod_methodIndex] @ r2<- baseMethod->methodIndex
cmp r9, #0 @ is "this" null?
beq common_errNullObject @ null "this", throw exception
ldr r3, [r9, #offObject_clazz] @ r3<- thisPtr->clazz
ldr r3, [r3, #offClassObject_vtable] @ r3<- thisPtr->clazz->vtable
ldr r0, [r3, r2, lsl #2] @ r3<- vtable[methodIndex]
bl common_invokeMethodRange @ (r0=method, r9="this")
/* continuation for OP_INVOKE_SUPER_RANGE */
/*
* At this point:
* r0 = resolved base method
* r10 = method->clazz
*/
.LOP_INVOKE_SUPER_RANGE_continue:
ldr r1, [r10, #offClassObject_super] @ r1<- method->clazz->super
ldrh r2, [r0, #offMethod_methodIndex] @ r2<- baseMethod->methodIndex
ldr r3, [r1, #offClassObject_vtableCount] @ r3<- super->vtableCount
EXPORT_PC() @ must export for invoke
cmp r2, r3 @ compare (methodIndex, vtableCount)
bcs .LOP_INVOKE_SUPER_RANGE_nsm @ method not present in superclass
ldr r1, [r1, #offClassObject_vtable] @ r1<- ...clazz->super->vtable
ldr r0, [r1, r2, lsl #2] @ r3<- vtable[methodIndex]
bl common_invokeMethodRange @ continue on
.LOP_INVOKE_SUPER_RANGE_resolve:
mov r0, r10 @ r0<- method->clazz
mov r2, #METHOD_VIRTUAL @ resolver method type
bl dvmResolveMethod @ r0<- call(clazz, ref, flags)
cmp r0, #0 @ got null?
bne .LOP_INVOKE_SUPER_RANGE_continue @ no, continue
b common_exceptionThrown @ yes, handle exception
/*
* Throw a NoSuchMethodError with the method name as the message.
* r0 = resolved base method
*/
.LOP_INVOKE_SUPER_RANGE_nsm:
ldr r1, [r0, #offMethod_name] @ r1<- method name
b common_errNoSuchMethod
/* continuation for OP_INVOKE_DIRECT_RANGE */
/*
* On entry:
* r1 = reference (BBBB or CCCC)
* r10 = "this" register
*/
.LOP_INVOKE_DIRECT_RANGE_resolve:
ldr r3, [rSELF, #offThread_method] @ r3<- self->method
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
mov r2, #METHOD_DIRECT @ resolver method type
bl dvmResolveMethod @ r0<- call(clazz, ref, flags)
cmp r0, #0 @ got null?
bne .LOP_INVOKE_DIRECT_RANGE_finish @ no, continue
b common_exceptionThrown @ yes, handle exception
/* continuation for OP_INVOKE_STATIC_RANGE */
.LOP_INVOKE_STATIC_RANGE_resolve:
ldr r3, [rSELF, #offThread_method] @ r3<- self->method
ldr r0, [r3, #offMethod_clazz] @ r0<- method->clazz
mov r2, #METHOD_STATIC @ resolver method type
bl dvmResolveMethod @ r0<- call(clazz, ref, flags)
cmp r0, #0 @ got null?
#if defined(WITH_JIT)
/*
* Check to see if we're actively building a trace. If so,
* we need to keep this instruction out of it.
* r10: &resolved_methodToCall
*/
ldrh r2, [rSELF, #offThread_subMode]
beq common_exceptionThrown @ null, handle exception
ands r2, #kSubModeJitTraceBuild @ trace under construction?
beq common_invokeMethodRange @ no (r0=method, r9="this")
ldr r1, [r10] @ reload resolved method
cmp r1, #0 @ finished resolving?
bne common_invokeMethodRange @ yes (r0=method, r9="this")
mov r10, r0 @ preserve method
mov r0, rSELF
mov r1, rPC
bl dvmJitEndTraceSelect @ (self, pc)
mov r0, r10
b common_invokeMethodRange @ whew, finally!
#else
bne common_invokeMethodRange @ (r0=method, r9="this")
b common_exceptionThrown @ yes, handle exception
#endif
/* continuation for OP_FLOAT_TO_LONG */
/*
* Convert the float in r0 to a long in r0/r1.
*
* We have to clip values to long min/max per the specification. The
* expected common case is a "reasonable" value that converts directly
* to modest integer. The EABI convert function isn't doing this for us.
*/
f2l_doconv:
stmfd sp!, {r4, lr}
mov r1, #0x5f000000 @ (float)maxlong
mov r4, r0
bl __aeabi_fcmpge @ is arg >= maxlong?
cmp r0, #0 @ nonzero == yes
mvnne r0, #0 @ return maxlong (7fffffff)
mvnne r1, #0x80000000
ldmnefd sp!, {r4, pc}
mov r0, r4 @ recover arg
mov r1, #0xdf000000 @ (float)minlong
bl __aeabi_fcmple @ is arg <= minlong?
cmp r0, #0 @ nonzero == yes
movne r0, #0 @ return minlong (80000000)
movne r1, #0x80000000
ldmnefd sp!, {r4, pc}
mov r0, r4 @ recover arg
mov r1, r4
bl __aeabi_fcmpeq @ is arg == self?
cmp r0, #0 @ zero == no
moveq r1, #0 @ return zero for NaN
ldmeqfd sp!, {r4, pc}
mov r0, r4 @ recover arg
bl __aeabi_f2lz @ convert float to long
ldmfd sp!, {r4, pc}
/* continuation for OP_DOUBLE_TO_LONG */
/*
* Convert the double in r0/r1 to a long in r0/r1.
*
* We have to clip values to long min/max per the specification. The
* expected common case is a "reasonable" value that converts directly
* to modest integer. The EABI convert function isn't doing this for us.
*/
d2l_doconv:
stmfd sp!, {r4, r5, lr} @ save regs
mov r3, #0x43000000 @ maxlong, as a double (high word)
add r3, #0x00e00000 @ 0x43e00000
mov r2, #0 @ maxlong, as a double (low word)
sub sp, sp, #4 @ align for EABI
mov r4, r0 @ save a copy of r0
mov r5, r1 @ and r1
bl __aeabi_dcmpge @ is arg >= maxlong?
cmp r0, #0 @ nonzero == yes
mvnne r0, #0 @ return maxlong (7fffffffffffffff)
mvnne r1, #0x80000000
bne 1f
mov r0, r4 @ recover arg
mov r1, r5
mov r3, #0xc3000000 @ minlong, as a double (high word)
add r3, #0x00e00000 @ 0xc3e00000
mov r2, #0 @ minlong, as a double (low word)
bl __aeabi_dcmple @ is arg <= minlong?
cmp r0, #0 @ nonzero == yes
movne r0, #0 @ return minlong (8000000000000000)
movne r1, #0x80000000
bne 1f
mov r0, r4 @ recover arg
mov r1, r5
mov r2, r4 @ compare against self
mov r3, r5
bl __aeabi_dcmpeq @ is arg == self?
cmp r0, #0 @ zero == no
moveq r1, #0 @ return zero for NaN
beq 1f
mov r0, r4 @ recover arg
mov r1, r5
bl __aeabi_d2lz @ convert double to long
1:
add sp, sp, #4
ldmfd sp!, {r4, r5, pc}
/* continuation for OP_MUL_LONG */
.LOP_MUL_LONG_finish:
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r0, {r9-r10} @ vAA/vAA+1<- r9/r10
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_SHL_LONG */
.LOP_SHL_LONG_finish:
mov r0, r0, asl r2 @ r0<- r0 << r2
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_SHR_LONG */
.LOP_SHR_LONG_finish:
mov r1, r1, asr r2 @ r1<- r1 >> r2
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_USHR_LONG */
.LOP_USHR_LONG_finish:
mov r1, r1, lsr r2 @ r1<- r1 >>> r2
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_SHL_LONG_2ADDR */
.LOP_SHL_LONG_2ADDR_finish:
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_SHR_LONG_2ADDR */
.LOP_SHR_LONG_2ADDR_finish:
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_USHR_LONG_2ADDR */
.LOP_USHR_LONG_2ADDR_finish:
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r9, {r0-r1} @ vAA/vAA+1<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IGET_VOLATILE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_VOLATILE_finish:
@bl common_squeak0
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
ldr r0, [r9, r3] @ r0<- obj.field (8/16/32 bits)
SMP_DMB @ acquiring load
mov r2, rINST, lsr #8 @ r2<- A+
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15 @ r2<- A
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IPUT_VOLATILE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_VOLATILE_finish:
@bl common_squeak0
mov r1, rINST, lsr #8 @ r1<- A+
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
and r1, r1, #15 @ r1<- A
cmp r9, #0 @ check object for null
GET_VREG(r0, r1) @ r0<- fp[A]
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SMP_DMB_ST @ releasing store
str r0, [r9, r3] @ obj.field (8/16/32 bits)<- r0
SMP_DMB
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_SGET_VOLATILE */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SGET_VOLATILE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_VOLATILE_finish
/* continuation for OP_SPUT_VOLATILE */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SPUT_VOLATILE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_VOLATILE_finish @ resume
/* continuation for OP_IGET_OBJECT_VOLATILE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_OBJECT_VOLATILE_finish:
@bl common_squeak0
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
ldr r0, [r9, r3] @ r0<- obj.field (8/16/32 bits)
SMP_DMB @ acquiring load
mov r2, rINST, lsr #8 @ r2<- A+
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15 @ r2<- A
GET_INST_OPCODE(ip) @ extract opcode from rINST
SET_VREG(r0, r2) @ fp[A]<- r0
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IGET_WIDE_VOLATILE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IGET_WIDE_VOLATILE_finish:
cmp r9, #0 @ check object for null
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
beq common_errNullObject @ object was null
.if 1
add r0, r9, r3 @ r0<- address of field
bl dvmQuasiAtomicRead64 @ r0/r1<- contents of field
.else
ldrd r0, [r9, r3] @ r0/r1<- obj.field (64-bit align ok)
.endif
mov r2, rINST, lsr #8 @ r2<- A+
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
and r2, r2, #15 @ r2<- A
add r3, rFP, r2, lsl #2 @ r3<- &fp[A]
GET_INST_OPCODE(ip) @ extract opcode from rINST
stmia r3, {r0-r1} @ fp[A]<- r0/r1
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_IPUT_WIDE_VOLATILE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_WIDE_VOLATILE_finish:
mov r2, rINST, lsr #8 @ r2<- A+
cmp r9, #0 @ check object for null
and r2, r2, #15 @ r2<- A
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
add r2, rFP, r2, lsl #2 @ r3<- &fp[A]
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
ldmia r2, {r0-r1} @ r0/r1<- fp[A]
GET_INST_OPCODE(r10) @ extract opcode from rINST
.if 1
add r2, r9, r3 @ r2<- target address
bl dvmQuasiAtomicSwap64Sync @ stores r0/r1 into addr r2
.else
strd r0, [r9, r3] @ obj.field (64 bits, aligned)<- r0/r1
.endif
GOTO_OPCODE(r10) @ jump to next instruction
/* continuation for OP_SGET_WIDE_VOLATILE */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*
* Returns StaticField pointer in r0.
*/
.LOP_SGET_WIDE_VOLATILE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r1<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_WIDE_VOLATILE_finish @ resume
/* continuation for OP_SPUT_WIDE_VOLATILE */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r9: &fp[AA]
* r10: dvmDex->pResFields
*
* Returns StaticField pointer in r2.
*/
.LOP_SPUT_WIDE_VOLATILE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
mov r2, r0 @ copy to r2
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_WIDE_VOLATILE_finish @ resume
/* continuation for OP_EXECUTE_INLINE */
/*
* Extract args, call function.
* r0 = #of args (0-4)
* r10 = call index
* lr = return addr, above [DO NOT bl out of here w/o preserving LR]
*
* Other ideas:
* - Use a jump table from the main piece to jump directly into the
* AND/LDR pairs. Costs a data load, saves a branch.
* - Have five separate pieces that do the loading, so we can work the
* interleave a little better. Increases code size.
*/
.LOP_EXECUTE_INLINE_continue:
rsb r0, r0, #4 @ r0<- 4-r0
FETCH(rINST, 2) @ rINST<- FEDC
add pc, pc, r0, lsl #3 @ computed goto, 2 instrs each
bl common_abort @ (skipped due to ARM prefetch)
4: and ip, rINST, #0xf000 @ isolate F
ldr r3, [rFP, ip, lsr #10] @ r3<- vF (shift right 12, left 2)
3: and ip, rINST, #0x0f00 @ isolate E
ldr r2, [rFP, ip, lsr #6] @ r2<- vE
2: and ip, rINST, #0x00f0 @ isolate D
ldr r1, [rFP, ip, lsr #2] @ r1<- vD
1: and ip, rINST, #0x000f @ isolate C
ldr r0, [rFP, ip, lsl #2] @ r0<- vC
0:
ldr rINST, .LOP_EXECUTE_INLINE_table @ table of InlineOperation
5: add rINST, pc
ldr pc, [rINST, r10, lsl #4] @ sizeof=16, "func" is first entry
@ (not reached)
/*
* We're debugging or profiling.
* r10: opIndex
*/
.LOP_EXECUTE_INLINE_debugmode:
mov r0, r10
bl dvmResolveInlineNative
cmp r0, #0 @ did it resolve?
beq .LOP_EXECUTE_INLINE_resume @ no, just move on
mov r9, r0 @ remember method
mov r1, rSELF
bl dvmFastMethodTraceEnter @ (method, self)
add r1, rSELF, #offThread_retval@ r1<- &self->retval
sub sp, sp, #8 @ make room for arg, +64 bit align
mov r0, rINST, lsr #12 @ r0<- B
str r1, [sp] @ push &self->retval
bl .LOP_EXECUTE_INLINE_continue @ make call; will return after
mov rINST, r0 @ save result of inline
add sp, sp, #8 @ pop stack
mov r0, r9 @ r0<- method
mov r1, rSELF
bl dvmFastNativeMethodTraceExit @ (method, self)
cmp rINST, #0 @ test boolean result of inline
beq common_exceptionThrown @ returned false, handle exception
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
.LOP_EXECUTE_INLINE_table:
.word PCREL_REF(gDvmInlineOpsTable,5b)
/* continuation for OP_EXECUTE_INLINE_RANGE */
/*
* Extract args, call function.
* r0 = #of args (0-4)
* r10 = call index
* lr = return addr, above [DO NOT bl out of here w/o preserving LR]
*/
.LOP_EXECUTE_INLINE_RANGE_continue:
rsb r0, r0, #4 @ r0<- 4-r0
FETCH(r9, 2) @ r9<- CCCC
add pc, pc, r0, lsl #3 @ computed goto, 2 instrs each
bl common_abort @ (skipped due to ARM prefetch)
4: add ip, r9, #3 @ base+3
GET_VREG(r3, ip) @ r3<- vBase[3]
3: add ip, r9, #2 @ base+2
GET_VREG(r2, ip) @ r2<- vBase[2]
2: add ip, r9, #1 @ base+1
GET_VREG(r1, ip) @ r1<- vBase[1]
1: add ip, r9, #0 @ (nop)
GET_VREG(r0, ip) @ r0<- vBase[0]
0:
ldr r9, .LOP_EXECUTE_INLINE_RANGE_table @ table of InlineOperation
5: add r9, pc
ldr pc, [r9, r10, lsl #4] @ sizeof=16, "func" is first entry
@ (not reached)
/*
* We're debugging or profiling.
* r10: opIndex
*/
.LOP_EXECUTE_INLINE_RANGE_debugmode:
mov r0, r10
bl dvmResolveInlineNative
cmp r0, #0 @ did it resolve?
beq .LOP_EXECUTE_INLINE_RANGE_resume @ no, just move on
mov r9, r0 @ remember method
mov r1, rSELF
bl dvmFastMethodTraceEnter @ (method, self)
add r1, rSELF, #offThread_retval@ r1<- &self->retval
sub sp, sp, #8 @ make room for arg, +64 bit align
mov r0, rINST, lsr #8 @ r0<- B
mov rINST, r9 @ rINST<- method
str r1, [sp] @ push &self->retval
bl .LOP_EXECUTE_INLINE_RANGE_continue @ make call; will return after
mov r9, r0 @ save result of inline
add sp, sp, #8 @ pop stack
mov r0, rINST @ r0<- method
mov r1, rSELF
bl dvmFastNativeMethodTraceExit @ (method, self)
cmp r9, #0 @ test boolean result of inline
beq common_exceptionThrown @ returned false, handle exception
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
.LOP_EXECUTE_INLINE_RANGE_table:
.word PCREL_REF(gDvmInlineOpsTable,5b)
/* continuation for OP_INVOKE_OBJECT_INIT_RANGE */
.LOP_INVOKE_OBJECT_INIT_RANGE_setFinal:
EXPORT_PC() @ can throw
bl dvmSetFinalizable @ call dvmSetFinalizable(obj)
ldr r0, [rSELF, #offThread_exception] @ r0<- self->exception
cmp r0, #0 @ exception pending?
bne common_exceptionThrown @ yes, handle it
b .LOP_INVOKE_OBJECT_INIT_RANGE_finish
/*
* A debugger is attached, so we need to go ahead and do
* this. For simplicity, we'll just jump directly to the
* corresponding handler. Note that we can't use
* rIBASE here because it may be in single-step mode.
* Load the primary table base directly.
*/
.LOP_INVOKE_OBJECT_INIT_RANGE_debugger:
ldr r1, [rSELF, #offThread_mainHandlerTable]
mov ip, #OP_INVOKE_DIRECT_RANGE
GOTO_OPCODE_BASE(r1,ip) @ execute it
/* continuation for OP_IPUT_OBJECT_VOLATILE */
/*
* Currently:
* r0 holds resolved field
* r9 holds object
*/
.LOP_IPUT_OBJECT_VOLATILE_finish:
@bl common_squeak0
mov r1, rINST, lsr #8 @ r1<- A+
ldr r3, [r0, #offInstField_byteOffset] @ r3<- byte offset of field
and r1, r1, #15 @ r1<- A
cmp r9, #0 @ check object for null
GET_VREG(r0, r1) @ r0<- fp[A]
ldr r2, [rSELF, #offThread_cardTable] @ r2<- card table base
beq common_errNullObject @ object was null
FETCH_ADVANCE_INST(2) @ advance rPC, load rINST
SMP_DMB_ST @ releasing store
str r0, [r9, r3] @ obj.field (32 bits)<- r0
SMP_DMB
GET_INST_OPCODE(ip) @ extract opcode from rINST
cmp r0, #0 @ stored a null reference?
strneb r2, [r2, r9, lsr #GC_CARD_SHIFT] @ mark card if not
GOTO_OPCODE(ip) @ jump to next instruction
/* continuation for OP_SGET_OBJECT_VOLATILE */
/*
* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SGET_OBJECT_VOLATILE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SGET_OBJECT_VOLATILE_finish
/* continuation for OP_SPUT_OBJECT_VOLATILE */
.LOP_SPUT_OBJECT_VOLATILE_end:
str r1, [r0, #offStaticField_value] @ field<- vAA
SMP_DMB
cmp r1, #0 @ stored a null object?
strneb r2, [r2, r9, lsr #GC_CARD_SHIFT] @ mark card based on obj head
GOTO_OPCODE(ip) @ jump to next instruction
/* Continuation if the field has not yet been resolved.
* r1: BBBB field ref
* r10: dvmDex->pResFields
*/
.LOP_SPUT_OBJECT_VOLATILE_resolve:
ldr r2, [rSELF, #offThread_method] @ r2<- current method
#if defined(WITH_JIT)
add r10, r10, r1, lsl #2 @ r10<- &dvmDex->pResFields[field]
#endif
EXPORT_PC() @ resolve() could throw, so export now
ldr r0, [r2, #offMethod_clazz] @ r0<- method->clazz
bl dvmResolveStaticField @ r0<- resolved StaticField ptr
cmp r0, #0 @ success?
beq common_exceptionThrown @ no, handle exception
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including this instruction.
*/
bl common_verifyField
#endif
b .LOP_SPUT_OBJECT_VOLATILE_finish @ resume
.size dvmAsmSisterStart, .-dvmAsmSisterStart
.global dvmAsmSisterEnd
dvmAsmSisterEnd:
.global dvmAsmAltInstructionStart
.type dvmAsmAltInstructionStart, %function
.text
dvmAsmAltInstructionStart = .L_ALT_OP_NOP
/* ------------------------------ */
.balign 64
.L_ALT_OP_NOP: /* 0x00 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (0 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE: /* 0x01 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (1 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_FROM16: /* 0x02 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (2 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_16: /* 0x03 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (3 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_WIDE: /* 0x04 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (4 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_WIDE_FROM16: /* 0x05 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (5 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_WIDE_16: /* 0x06 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (6 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_OBJECT: /* 0x07 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (7 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_OBJECT_FROM16: /* 0x08 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (8 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_OBJECT_16: /* 0x09 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (9 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_RESULT: /* 0x0a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (10 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_RESULT_WIDE: /* 0x0b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (11 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_RESULT_OBJECT: /* 0x0c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (12 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MOVE_EXCEPTION: /* 0x0d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (13 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_RETURN_VOID: /* 0x0e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (14 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_RETURN: /* 0x0f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (15 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_RETURN_WIDE: /* 0x10 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (16 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_RETURN_OBJECT: /* 0x11 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (17 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_4: /* 0x12 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (18 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_16: /* 0x13 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (19 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST: /* 0x14 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (20 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_HIGH16: /* 0x15 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (21 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_WIDE_16: /* 0x16 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (22 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_WIDE_32: /* 0x17 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (23 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_WIDE: /* 0x18 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (24 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_WIDE_HIGH16: /* 0x19 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (25 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_STRING: /* 0x1a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (26 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_STRING_JUMBO: /* 0x1b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (27 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CONST_CLASS: /* 0x1c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (28 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MONITOR_ENTER: /* 0x1d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (29 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MONITOR_EXIT: /* 0x1e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (30 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CHECK_CAST: /* 0x1f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (31 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INSTANCE_OF: /* 0x20 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (32 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ARRAY_LENGTH: /* 0x21 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (33 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_NEW_INSTANCE: /* 0x22 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (34 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_NEW_ARRAY: /* 0x23 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (35 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_FILLED_NEW_ARRAY: /* 0x24 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (36 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_FILLED_NEW_ARRAY_RANGE: /* 0x25 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (37 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_FILL_ARRAY_DATA: /* 0x26 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (38 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_THROW: /* 0x27 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (39 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_GOTO: /* 0x28 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (40 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_GOTO_16: /* 0x29 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (41 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_GOTO_32: /* 0x2a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (42 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_PACKED_SWITCH: /* 0x2b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (43 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPARSE_SWITCH: /* 0x2c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (44 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CMPL_FLOAT: /* 0x2d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (45 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CMPG_FLOAT: /* 0x2e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (46 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CMPL_DOUBLE: /* 0x2f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (47 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CMPG_DOUBLE: /* 0x30 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (48 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_CMP_LONG: /* 0x31 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (49 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_EQ: /* 0x32 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (50 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_NE: /* 0x33 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (51 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_LT: /* 0x34 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (52 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_GE: /* 0x35 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (53 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_GT: /* 0x36 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (54 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_LE: /* 0x37 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (55 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_EQZ: /* 0x38 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (56 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_NEZ: /* 0x39 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (57 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_LTZ: /* 0x3a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (58 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_GEZ: /* 0x3b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (59 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_GTZ: /* 0x3c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (60 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IF_LEZ: /* 0x3d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (61 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_3E: /* 0x3e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (62 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_3F: /* 0x3f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (63 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_40: /* 0x40 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (64 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_41: /* 0x41 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (65 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_42: /* 0x42 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (66 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_43: /* 0x43 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (67 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AGET: /* 0x44 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (68 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AGET_WIDE: /* 0x45 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (69 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AGET_OBJECT: /* 0x46 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (70 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AGET_BOOLEAN: /* 0x47 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (71 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AGET_BYTE: /* 0x48 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (72 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AGET_CHAR: /* 0x49 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (73 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AGET_SHORT: /* 0x4a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (74 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_APUT: /* 0x4b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (75 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_APUT_WIDE: /* 0x4c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (76 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_APUT_OBJECT: /* 0x4d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (77 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_APUT_BOOLEAN: /* 0x4e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (78 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_APUT_BYTE: /* 0x4f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (79 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_APUT_CHAR: /* 0x50 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (80 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_APUT_SHORT: /* 0x51 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (81 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET: /* 0x52 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (82 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_WIDE: /* 0x53 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (83 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_OBJECT: /* 0x54 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (84 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_BOOLEAN: /* 0x55 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (85 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_BYTE: /* 0x56 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (86 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_CHAR: /* 0x57 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (87 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_SHORT: /* 0x58 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (88 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT: /* 0x59 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (89 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_WIDE: /* 0x5a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (90 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_OBJECT: /* 0x5b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (91 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_BOOLEAN: /* 0x5c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (92 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_BYTE: /* 0x5d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (93 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_CHAR: /* 0x5e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (94 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_SHORT: /* 0x5f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (95 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET: /* 0x60 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (96 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET_WIDE: /* 0x61 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (97 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET_OBJECT: /* 0x62 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (98 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET_BOOLEAN: /* 0x63 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (99 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET_BYTE: /* 0x64 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (100 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET_CHAR: /* 0x65 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (101 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET_SHORT: /* 0x66 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (102 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT: /* 0x67 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (103 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT_WIDE: /* 0x68 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (104 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT_OBJECT: /* 0x69 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (105 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT_BOOLEAN: /* 0x6a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (106 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT_BYTE: /* 0x6b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (107 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT_CHAR: /* 0x6c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (108 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT_SHORT: /* 0x6d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (109 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_VIRTUAL: /* 0x6e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (110 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_SUPER: /* 0x6f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (111 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_DIRECT: /* 0x70 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (112 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_STATIC: /* 0x71 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (113 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_INTERFACE: /* 0x72 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (114 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_73: /* 0x73 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (115 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_VIRTUAL_RANGE: /* 0x74 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (116 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_SUPER_RANGE: /* 0x75 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (117 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_DIRECT_RANGE: /* 0x76 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (118 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_STATIC_RANGE: /* 0x77 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (119 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_INTERFACE_RANGE: /* 0x78 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (120 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_79: /* 0x79 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (121 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_7A: /* 0x7a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (122 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_NEG_INT: /* 0x7b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (123 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_NOT_INT: /* 0x7c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (124 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_NEG_LONG: /* 0x7d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (125 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_NOT_LONG: /* 0x7e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (126 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_NEG_FLOAT: /* 0x7f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (127 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_NEG_DOUBLE: /* 0x80 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (128 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INT_TO_LONG: /* 0x81 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (129 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INT_TO_FLOAT: /* 0x82 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (130 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INT_TO_DOUBLE: /* 0x83 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (131 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_LONG_TO_INT: /* 0x84 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (132 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_LONG_TO_FLOAT: /* 0x85 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (133 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_LONG_TO_DOUBLE: /* 0x86 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (134 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_FLOAT_TO_INT: /* 0x87 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (135 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_FLOAT_TO_LONG: /* 0x88 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (136 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_FLOAT_TO_DOUBLE: /* 0x89 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (137 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DOUBLE_TO_INT: /* 0x8a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (138 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DOUBLE_TO_LONG: /* 0x8b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (139 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DOUBLE_TO_FLOAT: /* 0x8c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (140 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INT_TO_BYTE: /* 0x8d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (141 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INT_TO_CHAR: /* 0x8e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (142 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INT_TO_SHORT: /* 0x8f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (143 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_INT: /* 0x90 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (144 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SUB_INT: /* 0x91 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (145 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_INT: /* 0x92 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (146 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_INT: /* 0x93 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (147 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_INT: /* 0x94 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (148 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AND_INT: /* 0x95 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (149 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_OR_INT: /* 0x96 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (150 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_XOR_INT: /* 0x97 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (151 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHL_INT: /* 0x98 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (152 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHR_INT: /* 0x99 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (153 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_USHR_INT: /* 0x9a */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (154 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_LONG: /* 0x9b */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (155 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SUB_LONG: /* 0x9c */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (156 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_LONG: /* 0x9d */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (157 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_LONG: /* 0x9e */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (158 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_LONG: /* 0x9f */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (159 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AND_LONG: /* 0xa0 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (160 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_OR_LONG: /* 0xa1 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (161 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_XOR_LONG: /* 0xa2 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (162 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHL_LONG: /* 0xa3 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (163 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHR_LONG: /* 0xa4 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (164 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_USHR_LONG: /* 0xa5 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (165 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_FLOAT: /* 0xa6 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (166 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SUB_FLOAT: /* 0xa7 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (167 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_FLOAT: /* 0xa8 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (168 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_FLOAT: /* 0xa9 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (169 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_FLOAT: /* 0xaa */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (170 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_DOUBLE: /* 0xab */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (171 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SUB_DOUBLE: /* 0xac */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (172 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_DOUBLE: /* 0xad */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (173 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_DOUBLE: /* 0xae */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (174 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_DOUBLE: /* 0xaf */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (175 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_INT_2ADDR: /* 0xb0 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (176 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SUB_INT_2ADDR: /* 0xb1 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (177 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_INT_2ADDR: /* 0xb2 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (178 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_INT_2ADDR: /* 0xb3 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (179 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_INT_2ADDR: /* 0xb4 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (180 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AND_INT_2ADDR: /* 0xb5 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (181 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_OR_INT_2ADDR: /* 0xb6 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (182 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_XOR_INT_2ADDR: /* 0xb7 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (183 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHL_INT_2ADDR: /* 0xb8 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (184 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHR_INT_2ADDR: /* 0xb9 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (185 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_USHR_INT_2ADDR: /* 0xba */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (186 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_LONG_2ADDR: /* 0xbb */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (187 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SUB_LONG_2ADDR: /* 0xbc */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (188 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_LONG_2ADDR: /* 0xbd */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (189 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_LONG_2ADDR: /* 0xbe */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (190 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_LONG_2ADDR: /* 0xbf */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (191 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AND_LONG_2ADDR: /* 0xc0 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (192 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_OR_LONG_2ADDR: /* 0xc1 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (193 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_XOR_LONG_2ADDR: /* 0xc2 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (194 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHL_LONG_2ADDR: /* 0xc3 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (195 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHR_LONG_2ADDR: /* 0xc4 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (196 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_USHR_LONG_2ADDR: /* 0xc5 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (197 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_FLOAT_2ADDR: /* 0xc6 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (198 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SUB_FLOAT_2ADDR: /* 0xc7 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (199 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_FLOAT_2ADDR: /* 0xc8 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (200 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_FLOAT_2ADDR: /* 0xc9 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (201 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_FLOAT_2ADDR: /* 0xca */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (202 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_DOUBLE_2ADDR: /* 0xcb */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (203 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SUB_DOUBLE_2ADDR: /* 0xcc */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (204 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_DOUBLE_2ADDR: /* 0xcd */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (205 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_DOUBLE_2ADDR: /* 0xce */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (206 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_DOUBLE_2ADDR: /* 0xcf */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (207 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_INT_LIT16: /* 0xd0 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (208 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_RSUB_INT: /* 0xd1 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (209 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_INT_LIT16: /* 0xd2 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (210 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_INT_LIT16: /* 0xd3 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (211 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_INT_LIT16: /* 0xd4 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (212 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AND_INT_LIT16: /* 0xd5 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (213 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_OR_INT_LIT16: /* 0xd6 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (214 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_XOR_INT_LIT16: /* 0xd7 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (215 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_ADD_INT_LIT8: /* 0xd8 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (216 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_RSUB_INT_LIT8: /* 0xd9 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (217 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_MUL_INT_LIT8: /* 0xda */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (218 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_DIV_INT_LIT8: /* 0xdb */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (219 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_REM_INT_LIT8: /* 0xdc */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (220 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_AND_INT_LIT8: /* 0xdd */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (221 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_OR_INT_LIT8: /* 0xde */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (222 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_XOR_INT_LIT8: /* 0xdf */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (223 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHL_INT_LIT8: /* 0xe0 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (224 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SHR_INT_LIT8: /* 0xe1 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (225 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_USHR_INT_LIT8: /* 0xe2 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (226 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_VOLATILE: /* 0xe3 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (227 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_VOLATILE: /* 0xe4 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (228 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET_VOLATILE: /* 0xe5 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (229 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT_VOLATILE: /* 0xe6 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (230 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_OBJECT_VOLATILE: /* 0xe7 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (231 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_WIDE_VOLATILE: /* 0xe8 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (232 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_WIDE_VOLATILE: /* 0xe9 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (233 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET_WIDE_VOLATILE: /* 0xea */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (234 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT_WIDE_VOLATILE: /* 0xeb */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (235 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_BREAKPOINT: /* 0xec */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (236 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_THROW_VERIFICATION_ERROR: /* 0xed */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (237 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_EXECUTE_INLINE: /* 0xee */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (238 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_EXECUTE_INLINE_RANGE: /* 0xef */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (239 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_OBJECT_INIT_RANGE: /* 0xf0 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (240 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_RETURN_VOID_BARRIER: /* 0xf1 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (241 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_QUICK: /* 0xf2 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (242 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_WIDE_QUICK: /* 0xf3 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (243 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IGET_OBJECT_QUICK: /* 0xf4 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (244 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_QUICK: /* 0xf5 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (245 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_WIDE_QUICK: /* 0xf6 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (246 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_OBJECT_QUICK: /* 0xf7 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (247 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_VIRTUAL_QUICK: /* 0xf8 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (248 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_VIRTUAL_QUICK_RANGE: /* 0xf9 */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (249 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_SUPER_QUICK: /* 0xfa */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (250 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_INVOKE_SUPER_QUICK_RANGE: /* 0xfb */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (251 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_IPUT_OBJECT_VOLATILE: /* 0xfc */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (252 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SGET_OBJECT_VOLATILE: /* 0xfd */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (253 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_SPUT_OBJECT_VOLATILE: /* 0xfe */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (254 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
/* ------------------------------ */
.balign 64
.L_ALT_OP_UNUSED_FF: /* 0xff */
/* File: armv5te/alt_stub.S */
/*
* Inter-instruction transfer stub. Call out to dvmCheckBefore to handle
* any interesting requests and then jump to the real instruction
* handler. Note that the call to dvmCheckBefore is done as a tail call.
* rIBASE updates won't be seen until a refresh, and we can tell we have a
* stale rIBASE if breakFlags==0. Always refresh rIBASE here, and then
* bail to the real handler if breakFlags==0.
*/
ldrb r3, [rSELF, #offThread_breakFlags]
adrl lr, dvmAsmInstructionStart + (255 * 64)
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
cmp r3, #0
bxeq lr @ nothing to do - jump to real handler
EXPORT_PC()
mov r0, rPC @ arg0
mov r1, rFP @ arg1
mov r2, rSELF @ arg2
b dvmCheckBefore @ (dPC,dFP,self) tail call
.balign 64
.size dvmAsmAltInstructionStart, .-dvmAsmAltInstructionStart
.global dvmAsmAltInstructionEnd
dvmAsmAltInstructionEnd:
/* File: armv5te/footer.S */
/*
* ===========================================================================
* Common subroutines and data
* ===========================================================================
*/
.text
.align 2
#if defined(WITH_JIT)
#if defined(WITH_SELF_VERIFICATION)
/*
* "longjmp" to a translation after single-stepping. Before returning
* to translation, must save state for self-verification.
*/
.global dvmJitResumeTranslation @ (Thread* self, u4* dFP)
dvmJitResumeTranslation:
mov rSELF, r0 @ restore self
mov rPC, r1 @ restore Dalvik pc
mov rFP, r2 @ restore Dalvik fp
ldr r10, [rSELF,#offThread_jitResumeNPC] @ resume address
mov r2, #0
str r2, [rSELF,#offThread_jitResumeNPC] @ reset resume address
ldr sp, [rSELF,#offThread_jitResumeNSP] @ cut back native stack
b jitSVShadowRunStart @ resume as if cache hit
@ expects resume addr in r10
.global dvmJitToInterpPunt
dvmJitToInterpPunt:
mov r2,#kSVSPunt @ r2<- interpreter entry point
mov r3, #0
str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land
b jitSVShadowRunEnd @ doesn't return
.global dvmJitToInterpSingleStep
dvmJitToInterpSingleStep:
mov rPC, r0 @ set up dalvik pc
EXPORT_PC()
str lr, [rSELF,#offThread_jitResumeNPC]
str sp, [rSELF,#offThread_jitResumeNSP]
str r1, [rSELF,#offThread_jitResumeDPC]
mov r2,#kSVSSingleStep @ r2<- interpreter entry point
b jitSVShadowRunEnd @ doesn't return
.global dvmJitToInterpNoChainNoProfile
dvmJitToInterpNoChainNoProfile:
mov r0,rPC @ pass our target PC
mov r2,#kSVSNoProfile @ r2<- interpreter entry point
mov r3, #0 @ 0 means !inJitCodeCache
str r3, [rSELF, #offThread_inJitCodeCache] @ back to the interp land
b jitSVShadowRunEnd @ doesn't return
.global dvmJitToInterpTraceSelectNoChain
dvmJitToInterpTraceSelectNoChain:
mov r0,rPC @ pass our target PC
mov r2,#kSVSTraceSelect @ r2<- interpreter entry point
mov r3, #0 @ 0 means !inJitCodeCache
str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land
b jitSVShadowRunEnd @ doesn't return
.global dvmJitToInterpTraceSelect
dvmJitToInterpTraceSelect:
ldr r0,[lr, #-1] @ pass our target PC
mov r2,#kSVSTraceSelect @ r2<- interpreter entry point
mov r3, #0 @ 0 means !inJitCodeCache
str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land
b jitSVShadowRunEnd @ doesn't return
.global dvmJitToInterpBackwardBranch
dvmJitToInterpBackwardBranch:
ldr r0,[lr, #-1] @ pass our target PC
mov r2,#kSVSBackwardBranch @ r2<- interpreter entry point
mov r3, #0 @ 0 means !inJitCodeCache
str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land
b jitSVShadowRunEnd @ doesn't return
.global dvmJitToInterpNormal
dvmJitToInterpNormal:
ldr r0,[lr, #-1] @ pass our target PC
mov r2,#kSVSNormal @ r2<- interpreter entry point
mov r3, #0 @ 0 means !inJitCodeCache
str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land
b jitSVShadowRunEnd @ doesn't return
.global dvmJitToInterpNoChain
dvmJitToInterpNoChain:
mov r0,rPC @ pass our target PC
mov r2,#kSVSNoChain @ r2<- interpreter entry point
mov r3, #0 @ 0 means !inJitCodeCache
str r3, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land
b jitSVShadowRunEnd @ doesn't return
#else
/*
* "longjmp" to a translation after single-stepping.
*/
.global dvmJitResumeTranslation @ (Thread* self, u4* dFP)
dvmJitResumeTranslation:
mov rSELF, r0 @ restore self
mov rPC, r1 @ restore Dalvik pc
mov rFP, r2 @ restore Dalvik fp
ldr r0, [rSELF,#offThread_jitResumeNPC]
mov r2, #0
str r2, [rSELF,#offThread_jitResumeNPC] @ reset resume address
ldr sp, [rSELF,#offThread_jitResumeNSP] @ cut back native stack
bx r0 @ resume translation
/*
* Return from the translation cache to the interpreter when the compiler is
* having issues translating/executing a Dalvik instruction. We have to skip
* the code cache lookup otherwise it is possible to indefinitely bouce
* between the interpreter and the code cache if the instruction that fails
* to be compiled happens to be at a trace start.
*/
.global dvmJitToInterpPunt
dvmJitToInterpPunt:
mov rPC, r0
#if defined(WITH_JIT_TUNING)
mov r0,lr
bl dvmBumpPunt;
#endif
EXPORT_PC()
mov r0, #0
str r0, [rSELF, #offThread_inJitCodeCache] @ Back to the interp land
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
FETCH_INST()
GET_INST_OPCODE(ip)
GOTO_OPCODE(ip)
/*
* Return to the interpreter to handle a single instruction.
* We'll use the normal single-stepping mechanism via interpBreak,
* but also save the native pc of the resume point in the translation
* and the native sp so that we can later do the equivalent of a
* longjmp() to resume.
* On entry:
* dPC <= Dalvik PC of instrucion to interpret
* lr <= resume point in translation
* r1 <= Dalvik PC of next instruction
*/
.global dvmJitToInterpSingleStep
dvmJitToInterpSingleStep:
mov rPC, r0 @ set up dalvik pc
EXPORT_PC()
str lr, [rSELF,#offThread_jitResumeNPC]
str sp, [rSELF,#offThread_jitResumeNSP]
str r1, [rSELF,#offThread_jitResumeDPC]
mov r1, #1
str r1, [rSELF,#offThread_singleStepCount] @ just step once
mov r0, rSELF
mov r1, #kSubModeCountedStep
bl dvmEnableSubMode @ (self, newMode)
ldr rIBASE, [rSELF,#offThread_curHandlerTable]
FETCH_INST()
GET_INST_OPCODE(ip)
GOTO_OPCODE(ip)
/*
* Return from the translation cache and immediately request
* a translation for the exit target. Commonly used for callees.
*/
.global dvmJitToInterpTraceSelectNoChain
dvmJitToInterpTraceSelectNoChain:
#if defined(WITH_JIT_TUNING)
bl dvmBumpNoChain
#endif
mov r0,rPC
mov r1,rSELF
bl dvmJitGetTraceAddrThread @ (pc, self)
str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag
mov r1, rPC @ arg1 of translation may need this
mov lr, #0 @ in case target is HANDLER_INTERPRET
cmp r0,#0 @ !0 means translation exists
bxne r0 @ continue native execution if so
b 2f @ branch over to use the interpreter
/*
* Return from the translation cache and immediately request
* a translation for the exit target. Commonly used following
* invokes.
*/
.global dvmJitToInterpTraceSelect
dvmJitToInterpTraceSelect:
ldr rPC,[lr, #-1] @ get our target PC
add rINST,lr,#-5 @ save start of chain branch
add rINST, #-4 @ .. which is 9 bytes back
mov r0,rPC
mov r1,rSELF
bl dvmJitGetTraceAddrThread @ (pc, self)
str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag
cmp r0,#0
beq 2f
mov r1,rINST
bl dvmJitChain @ r0<- dvmJitChain(codeAddr,chainAddr)
mov r1, rPC @ arg1 of translation may need this
mov lr, #0 @ in case target is HANDLER_INTERPRET
cmp r0,#0 @ successful chain?
bxne r0 @ continue native execution
b toInterpreter @ didn't chain - resume with interpreter
/* No translation, so request one if profiling isn't disabled*/
2:
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
ldr r0, [rSELF, #offThread_pJitProfTable]
FETCH_INST()
cmp r0, #0
movne r2,#kJitTSelectRequestHot @ ask for trace selection
bne common_selectTrace
GET_INST_OPCODE(ip)
GOTO_OPCODE(ip)
/*
* Return from the translation cache to the interpreter.
* The return was done with a BLX from thumb mode, and
* the following 32-bit word contains the target rPC value.
* Note that lr (r14) will have its low-order bit set to denote
* its thumb-mode origin.
*
* We'll need to stash our lr origin away, recover the new
* target and then check to see if there is a translation available
* for our new target. If so, we do a translation chain and
* go back to native execution. Otherwise, it's back to the
* interpreter (after treating this entry as a potential
* trace start).
*/
.global dvmJitToInterpNormal
dvmJitToInterpNormal:
ldr rPC,[lr, #-1] @ get our target PC
add rINST,lr,#-5 @ save start of chain branch
add rINST,#-4 @ .. which is 9 bytes back
#if defined(WITH_JIT_TUNING)
bl dvmBumpNormal
#endif
mov r0,rPC
mov r1,rSELF
bl dvmJitGetTraceAddrThread @ (pc, self)
str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag
cmp r0,#0
beq toInterpreter @ go if not, otherwise do chain
mov r1,rINST
bl dvmJitChain @ r0<- dvmJitChain(codeAddr,chainAddr)
mov r1, rPC @ arg1 of translation may need this
mov lr, #0 @ in case target is HANDLER_INTERPRET
cmp r0,#0 @ successful chain?
bxne r0 @ continue native execution
b toInterpreter @ didn't chain - resume with interpreter
/*
* Return from the translation cache to the interpreter to do method invocation.
* Check if translation exists for the callee, but don't chain to it.
*/
.global dvmJitToInterpNoChainNoProfile
dvmJitToInterpNoChainNoProfile:
#if defined(WITH_JIT_TUNING)
bl dvmBumpNoChain
#endif
mov r0,rPC
mov r1,rSELF
bl dvmJitGetTraceAddrThread @ (pc, self)
str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag
mov r1, rPC @ arg1 of translation may need this
mov lr, #0 @ in case target is HANDLER_INTERPRET
cmp r0,#0
bxne r0 @ continue native execution if so
EXPORT_PC()
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
FETCH_INST()
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/*
* Return from the translation cache to the interpreter to do method invocation.
* Check if translation exists for the callee, but don't chain to it.
*/
.global dvmJitToInterpNoChain
dvmJitToInterpNoChain:
#if defined(WITH_JIT_TUNING)
bl dvmBumpNoChain
#endif
mov r0,rPC
mov r1,rSELF
bl dvmJitGetTraceAddrThread @ (pc, self)
str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag
mov r1, rPC @ arg1 of translation may need this
mov lr, #0 @ in case target is HANDLER_INTERPRET
cmp r0,#0
bxne r0 @ continue native execution if so
#endif
/*
* No translation, restore interpreter regs and start interpreting.
* rSELF & rFP were preserved in the translated code, and rPC has
* already been restored by the time we get here. We'll need to set
* up rIBASE & rINST, and load the address of the JitTable into r0.
*/
toInterpreter:
EXPORT_PC()
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
FETCH_INST()
ldr r0, [rSELF, #offThread_pJitProfTable]
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
@ NOTE: intended fallthrough
/*
* Similar to common_updateProfile, but tests for null pJitProfTable
* r0 holds pJifProfTAble, rINST is loaded, rPC is current and
* rIBASE has been recently refreshed.
*/
common_testUpdateProfile:
cmp r0, #0 @ JIT switched off?
beq 4f @ return to interp if so
/*
* Common code to update potential trace start counter, and initiate
* a trace-build if appropriate.
* On entry here:
* r0 <= pJitProfTable (verified non-NULL)
* rPC <= Dalvik PC
* rINST <= next instruction
*/
common_updateProfile:
eor r3,rPC,rPC,lsr #12 @ cheap, but fast hash function
lsl r3,r3,#(32 - JIT_PROF_SIZE_LOG_2) @ shift out excess bits
ldrb r1,[r0,r3,lsr #(32 - JIT_PROF_SIZE_LOG_2)] @ get counter
GET_INST_OPCODE(ip)
subs r1,r1,#1 @ decrement counter
strb r1,[r0,r3,lsr #(32 - JIT_PROF_SIZE_LOG_2)] @ and store it
GOTO_OPCODE_IFNE(ip) @ if not threshold, fallthrough otherwise */
/* Looks good, reset the counter */
ldr r1, [rSELF, #offThread_jitThreshold]
strb r1,[r0,r3,lsr #(32 - JIT_PROF_SIZE_LOG_2)] @ reset counter
EXPORT_PC()
mov r0,rPC
mov r1,rSELF
bl dvmJitGetTraceAddrThread @ (pc, self)
str r0, [rSELF, #offThread_inJitCodeCache] @ set the inJitCodeCache flag
mov r1, rPC @ arg1 of translation may need this
mov lr, #0 @ in case target is HANDLER_INTERPRET
cmp r0,#0
#if !defined(WITH_SELF_VERIFICATION)
bxne r0 @ jump to the translation
mov r2,#kJitTSelectRequest @ ask for trace selection
@ fall-through to common_selectTrace
#else
moveq r2,#kJitTSelectRequest @ ask for trace selection
beq common_selectTrace
/*
* At this point, we have a target translation. However, if
* that translation is actually the interpret-only pseudo-translation
* we want to treat it the same as no translation.
*/
mov r10, r0 @ save target
bl dvmCompilerGetInterpretTemplate
cmp r0, r10 @ special case?
bne jitSVShadowRunStart @ set up self verification shadow space
@ Need to clear the inJitCodeCache flag
mov r3, #0 @ 0 means not in the JIT code cache
str r3, [rSELF, #offThread_inJitCodeCache] @ back to the interp land
GET_INST_OPCODE(ip)
GOTO_OPCODE(ip)
/* no return */
#endif
/*
* On entry:
* r2 is jit state.
*/
common_selectTrace:
ldrh r0,[rSELF,#offThread_subMode]
ands r0, #(kSubModeJitTraceBuild | kSubModeJitSV)
bne 3f @ already doing JIT work, continue
str r2,[rSELF,#offThread_jitState]
mov r0, rSELF
/*
* Call out to validate trace-building request. If successful,
* rIBASE will be swapped to to send us into single-stepping trace
* building mode, so we need to refresh before we continue.
*/
EXPORT_PC()
SAVE_PC_FP_TO_SELF() @ copy of pc/fp to Thread
bl dvmJitCheckTraceRequest
3:
FETCH_INST()
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
4:
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip)
/* no return */
#endif
#if defined(WITH_SELF_VERIFICATION)
/*
* Save PC and registers to shadow memory for self verification mode
* before jumping to native translation.
* On entry:
* rPC, rFP, rSELF: the values that they should contain
* r10: the address of the target translation.
*/
jitSVShadowRunStart:
mov r0,rPC @ r0<- program counter
mov r1,rFP @ r1<- frame pointer
mov r2,rSELF @ r2<- self (Thread) pointer
mov r3,r10 @ r3<- target translation
bl dvmSelfVerificationSaveState @ save registers to shadow space
ldr rFP,[r0,#offShadowSpace_shadowFP] @ rFP<- fp in shadow space
bx r10 @ jump to the translation
/*
* Restore PC, registers, and interpreter state to original values
* before jumping back to the interpreter.
* On entry:
* r0: dPC
* r2: self verification state
*/
jitSVShadowRunEnd:
mov r1,rFP @ pass ending fp
mov r3,rSELF @ pass self ptr for convenience
bl dvmSelfVerificationRestoreState @ restore pc and fp values
LOAD_PC_FP_FROM_SELF() @ restore pc, fp
ldr r1,[r0,#offShadowSpace_svState] @ get self verification state
cmp r1,#0 @ check for punt condition
beq 1f
@ Set up SV single-stepping
mov r0, rSELF
mov r1, #kSubModeJitSV
bl dvmEnableSubMode @ (self, subMode)
mov r2,#kJitSelfVerification @ ask for self verification
str r2,[rSELF,#offThread_jitState]
@ intentional fallthrough
1: @ exit to interpreter without check
EXPORT_PC()
ldr rIBASE, [rSELF, #offThread_curHandlerTable]
FETCH_INST()
GET_INST_OPCODE(ip)
GOTO_OPCODE(ip)
#endif
/*
* The equivalent of "goto bail", this calls through the "bail handler".
* It will end this interpreter activation, and return to the caller
* of dvmMterpStdRun.
*
* State registers will be saved to the "thread" area before bailing
* debugging purposes
*/
common_gotoBail:
SAVE_PC_FP_TO_SELF() @ export state to "thread"
mov r0, rSELF @ r0<- self ptr
b dvmMterpStdBail @ call(self, changeInterp)
/*
* The JIT's invoke method needs to remember the callsite class and
* target pair. Save them here so that they are available to
* dvmCheckJit following the interpretation of this invoke.
*/
#if defined(WITH_JIT)
save_callsiteinfo:
cmp r9, #0
ldrne r9, [r9, #offObject_clazz]
str r0, [rSELF, #offThread_methodToCall]
str r9, [rSELF, #offThread_callsiteClass]
bx lr
#endif
/*
* Common code for method invocation with range.
*
* On entry:
* r0 is "Method* methodToCall", r9 is "this"
*/
common_invokeMethodRange:
.LinvokeNewRange:
#if defined(WITH_JIT)
ldrh r1, [rSELF, #offThread_subMode]
ands r1, #kSubModeJitTraceBuild
blne save_callsiteinfo
#endif
@ prepare to copy args to "outs" area of current frame
movs r2, rINST, lsr #8 @ r2<- AA (arg count) -- test for zero
SAVEAREA_FROM_FP(r10, rFP) @ r10<- stack save area
beq .LinvokeArgsDone @ if no args, skip the rest
FETCH(r1, 2) @ r1<- CCCC
.LinvokeRangeArgs:
@ r0=methodToCall, r1=CCCC, r2=count, r10=outs
@ (very few methods have > 10 args; could unroll for common cases)
add r3, rFP, r1, lsl #2 @ r3<- &fp[CCCC]
sub r10, r10, r2, lsl #2 @ r10<- "outs" area, for call args
1: ldr r1, [r3], #4 @ val = *fp++
subs r2, r2, #1 @ count--
str r1, [r10], #4 @ *outs++ = val
bne 1b @ ...while count != 0
b .LinvokeArgsDone
/*
* Common code for method invocation without range.
*
* On entry:
* r0 is "Method* methodToCall", r9 is "this"
*/
common_invokeMethodNoRange:
.LinvokeNewNoRange:
#if defined(WITH_JIT)
ldrh r1, [rSELF, #offThread_subMode]
ands r1, #kSubModeJitTraceBuild
blne save_callsiteinfo
#endif
@ prepare to copy args to "outs" area of current frame
movs r2, rINST, lsr #12 @ r2<- B (arg count) -- test for zero
SAVEAREA_FROM_FP(r10, rFP) @ r10<- stack save area
FETCH(r1, 2) @ r1<- GFED (load here to hide latency)
beq .LinvokeArgsDone
@ r0=methodToCall, r1=GFED, r2=count, r10=outs
.LinvokeNonRange:
rsb r2, r2, #5 @ r2<- 5-r2
add pc, pc, r2, lsl #4 @ computed goto, 4 instrs each
bl common_abort @ (skipped due to ARM prefetch)
5: and ip, rINST, #0x0f00 @ isolate A
ldr r2, [rFP, ip, lsr #6] @ r2<- vA (shift right 8, left 2)
mov r0, r0 @ nop
str r2, [r10, #-4]! @ *--outs = vA
4: and ip, r1, #0xf000 @ isolate G
ldr r2, [rFP, ip, lsr #10] @ r2<- vG (shift right 12, left 2)
mov r0, r0 @ nop
str r2, [r10, #-4]! @ *--outs = vG
3: and ip, r1, #0x0f00 @ isolate F
ldr r2, [rFP, ip, lsr #6] @ r2<- vF
mov r0, r0 @ nop
str r2, [r10, #-4]! @ *--outs = vF
2: and ip, r1, #0x00f0 @ isolate E
ldr r2, [rFP, ip, lsr #2] @ r2<- vE
mov r0, r0 @ nop
str r2, [r10, #-4]! @ *--outs = vE
1: and ip, r1, #0x000f @ isolate D
ldr r2, [rFP, ip, lsl #2] @ r2<- vD
mov r0, r0 @ nop
str r2, [r10, #-4]! @ *--outs = vD
0: @ fall through to .LinvokeArgsDone
.LinvokeArgsDone: @ r0=methodToCall
ldrh r9, [r0, #offMethod_registersSize] @ r9<- methodToCall->regsSize
ldrh r3, [r0, #offMethod_outsSize] @ r3<- methodToCall->outsSize
ldr r2, [r0, #offMethod_insns] @ r2<- method->insns
ldr rINST, [r0, #offMethod_clazz] @ rINST<- method->clazz
@ find space for the new stack frame, check for overflow
SAVEAREA_FROM_FP(r1, rFP) @ r1<- stack save area
sub r1, r1, r9, lsl #2 @ r1<- newFp (old savearea - regsSize)
SAVEAREA_FROM_FP(r10, r1) @ r10<- newSaveArea
@ bl common_dumpRegs
ldr r9, [rSELF, #offThread_interpStackEnd] @ r9<- interpStackEnd
sub r3, r10, r3, lsl #2 @ r3<- bottom (newsave - outsSize)
cmp r3, r9 @ bottom < interpStackEnd?
ldrh lr, [rSELF, #offThread_subMode]
ldr r3, [r0, #offMethod_accessFlags] @ r3<- methodToCall->accessFlags
blo .LstackOverflow @ yes, this frame will overflow stack
@ set up newSaveArea
#ifdef EASY_GDB
SAVEAREA_FROM_FP(ip, rFP) @ ip<- stack save area
str ip, [r10, #offStackSaveArea_prevSave]
#endif
str rFP, [r10, #offStackSaveArea_prevFrame]
str rPC, [r10, #offStackSaveArea_savedPc]
#if defined(WITH_JIT)
mov r9, #0
str r9, [r10, #offStackSaveArea_returnAddr]
#endif
str r0, [r10, #offStackSaveArea_method]
@ Profiling?
cmp lr, #0 @ any special modes happening?
bne 2f @ go if so
1:
tst r3, #ACC_NATIVE
bne .LinvokeNative
/*
stmfd sp!, {r0-r3}
bl common_printNewline
mov r0, rFP
mov r1, #0
bl dvmDumpFp
ldmfd sp!, {r0-r3}
stmfd sp!, {r0-r3}
mov r0, r1
mov r1, r10
bl dvmDumpFp
bl common_printNewline
ldmfd sp!, {r0-r3}
*/
ldrh r9, [r2] @ r9 <- load INST from new PC
ldr r3, [rINST, #offClassObject_pDvmDex] @ r3<- method->clazz->pDvmDex
mov rPC, r2 @ publish new rPC
@ Update state values for the new method
@ r0=methodToCall, r1=newFp, r3=newMethodClass, r9=newINST
str r0, [rSELF, #offThread_method] @ self->method = methodToCall
str r3, [rSELF, #offThread_methodClassDex] @ self->methodClassDex = ...
mov r2, #1
str r2, [rSELF, #offThread_debugIsMethodEntry]
#if defined(WITH_JIT)
ldr r0, [rSELF, #offThread_pJitProfTable]
mov rFP, r1 @ fp = newFp
GET_PREFETCHED_OPCODE(ip, r9) @ extract prefetched opcode from r9
mov rINST, r9 @ publish new rINST
str r1, [rSELF, #offThread_curFrame] @ curFrame = newFp
cmp r0,#0
bne common_updateProfile
GOTO_OPCODE(ip) @ jump to next instruction
#else
mov rFP, r1 @ fp = newFp
GET_PREFETCHED_OPCODE(ip, r9) @ extract prefetched opcode from r9
mov rINST, r9 @ publish new rINST
str r1, [rSELF, #offThread_curFrame] @ curFrame = newFp
GOTO_OPCODE(ip) @ jump to next instruction
#endif
2:
@ Profiling - record method entry. r0: methodToCall
stmfd sp!, {r0-r3} @ preserve r0-r3
str rPC, [rSELF, #offThread_pc] @ update interpSave.pc
mov r1, r0
mov r0, rSELF
bl dvmReportInvoke @ (self, method)
ldmfd sp!, {r0-r3} @ restore r0-r3
b 1b
.LinvokeNative:
@ Prep for the native call
@ r0=methodToCall, r1=newFp, r10=newSaveArea
ldrh lr, [rSELF, #offThread_subMode]
ldr r9, [rSELF, #offThread_jniLocal_topCookie]@r9<-thread->localRef->...
str r1, [rSELF, #offThread_curFrame] @ curFrame = newFp
str r9, [r10, #offStackSaveArea_localRefCookie] @newFp->localRefCookie=top
mov r2, r0 @ r2<- methodToCall
mov r0, r1 @ r0<- newFp (points to args)
add r1, rSELF, #offThread_retval @ r1<- &retval
mov r3, rSELF @ arg3<- self
#ifdef ASSIST_DEBUGGER
/* insert fake function header to help gdb find the stack frame */
b .Lskip
.type dalvik_mterp, %function
dalvik_mterp:
.fnstart
MTERP_ENTRY1
MTERP_ENTRY2
.Lskip:
#endif
cmp lr, #0 @ any special SubModes active?
bne 11f @ go handle them if so
ldr ip, [r2, #offMethod_nativeFunc] @ pc<- methodToCall->nativeFunc
blx ip
7:
@ native return; r10=newSaveArea
@ equivalent to dvmPopJniLocals
ldr r0, [r10, #offStackSaveArea_localRefCookie] @ r0<- saved top
ldr r1, [rSELF, #offThread_exception] @ check for exception
str rFP, [rSELF, #offThread_curFrame] @ curFrame = fp
cmp r1, #0 @ null?
str r0, [rSELF, #offThread_jniLocal_topCookie] @ new top <- old top
bne common_exceptionThrown @ no, handle exception
FETCH_ADVANCE_INST(3) @ advance rPC, load rINST
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
11:
@ r0=newFp, r1=&retval, r2=methodToCall, r3=self, lr=subModes
stmfd sp!, {r0-r3} @ save all but subModes
mov r0, r2 @ r0<- methodToCall
mov r1, rSELF
mov r2, rFP
bl dvmReportPreNativeInvoke @ (methodToCall, self, fp)
ldmfd sp, {r0-r3} @ refresh. NOTE: no sp autoincrement
@ Call the native method
ldr ip, [r2, #offMethod_nativeFunc] @ pc<- methodToCall->nativeFunc
blx ip
@ Restore the pre-call arguments
ldmfd sp!, {r0-r3} @ r2<- methodToCall (others unneeded)
@ Finish up any post-invoke subMode requirements
mov r0, r2 @ r0<- methodToCall
mov r1, rSELF
mov r2, rFP
bl dvmReportPostNativeInvoke @ (methodToCall, self, fp)
b 7b @ resume
.LstackOverflow: @ r0=methodToCall
mov r1, r0 @ r1<- methodToCall
mov r0, rSELF @ r0<- self
bl dvmHandleStackOverflow
b common_exceptionThrown
#ifdef ASSIST_DEBUGGER
.fnend
.size dalvik_mterp, .-dalvik_mterp
#endif
/*
* Common code for method invocation, calling through "glue code".
*
* TODO: now that we have range and non-range invoke handlers, this
* needs to be split into two. Maybe just create entry points
* that set r9 and jump here?
*
* On entry:
* r0 is "Method* methodToCall", the method we're trying to call
* r9 is "bool methodCallRange", indicating if this is a /range variant
*/
.if 0
.LinvokeOld:
sub sp, sp, #8 @ space for args + pad
FETCH(ip, 2) @ ip<- FEDC or CCCC
mov r2, r0 @ A2<- methodToCall
mov r0, rSELF @ A0<- self
SAVE_PC_FP_TO_SELF() @ export state to "self"
mov r1, r9 @ A1<- methodCallRange
mov r3, rINST, lsr #8 @ A3<- AA
str ip, [sp, #0] @ A4<- ip
bl dvmMterp_invokeMethod @ call the C invokeMethod
add sp, sp, #8 @ remove arg area
b common_resumeAfterGlueCall @ continue to next instruction
.endif
/*
* Common code for handling a return instruction.
*
* This does not return.
*/
common_returnFromMethod:
.LreturnNew:
ldrh lr, [rSELF, #offThread_subMode]
SAVEAREA_FROM_FP(r0, rFP)
ldr r9, [r0, #offStackSaveArea_savedPc] @ r9 = saveArea->savedPc
cmp lr, #0 @ any special subMode handling needed?
bne 19f
14:
ldr rFP, [r0, #offStackSaveArea_prevFrame] @ fp = saveArea->prevFrame
ldr r2, [rFP, #(offStackSaveArea_method - sizeofStackSaveArea)]
@ r2<- method we're returning to
cmp r2, #0 @ is this a break frame?
#if defined(WORKAROUND_CORTEX_A9_745320)
/* Don't use conditional loads if the HW defect exists */
beq 15f
ldr r10, [r2, #offMethod_clazz] @ r10<- method->clazz
15:
#else
ldrne r10, [r2, #offMethod_clazz] @ r10<- method->clazz
#endif
beq common_gotoBail @ break frame, bail out completely
ldr rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
PREFETCH_ADVANCE_INST(rINST, r9, 3) @ advance r9, update new rINST
str r2, [rSELF, #offThread_method]@ self->method = newSave->method
ldr r1, [r10, #offClassObject_pDvmDex] @ r1<- method->clazz->pDvmDex
str rFP, [rSELF, #offThread_curFrame] @ curFrame = fp
#if defined(WITH_JIT)
ldr r10, [r0, #offStackSaveArea_returnAddr] @ r10 = saveArea->returnAddr
mov rPC, r9 @ publish new rPC
str r1, [rSELF, #offThread_methodClassDex]
str r10, [rSELF, #offThread_inJitCodeCache] @ may return to JIT'ed land
cmp r10, #0 @ caller is compiled code
blxne r10
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
#else
GET_INST_OPCODE(ip) @ extract opcode from rINST
mov rPC, r9 @ publish new rPC
str r1, [rSELF, #offThread_methodClassDex]
GOTO_OPCODE(ip) @ jump to next instruction
#endif
19:
@ Handle special actions
@ On entry, r0: StackSaveArea
ldr r1, [r0, #offStackSaveArea_prevFrame] @ r2<- prevFP
str rPC, [rSELF, #offThread_pc] @ update interpSave.pc
str r1, [rSELF, #offThread_curFrame] @ update interpSave.curFrame
mov r0, rSELF
bl dvmReportReturn @ (self)
SAVEAREA_FROM_FP(r0, rFP) @ restore StackSaveArea
b 14b @ continue
/*
* Return handling, calls through "glue code".
*/
.if 0
.LreturnOld:
SAVE_PC_FP_TO_SELF() @ export state
mov r0, rSELF @ arg to function
bl dvmMterp_returnFromMethod
b common_resumeAfterGlueCall
.endif
/*
* Somebody has thrown an exception. Handle it.
*
* If the exception processing code returns to us (instead of falling
* out of the interpreter), continue with whatever the next instruction
* now happens to be.
*
* This does not return.
*/
.global dvmMterpCommonExceptionThrown
dvmMterpCommonExceptionThrown:
common_exceptionThrown:
.LexceptionNew:
EXPORT_PC()
mov r0, rSELF
bl dvmCheckSuspendPending
ldr r9, [rSELF, #offThread_exception] @ r9<- self->exception
mov r1, rSELF @ r1<- self
mov r0, r9 @ r0<- exception
bl dvmAddTrackedAlloc @ don't let the exception be GCed
ldrh r2, [rSELF, #offThread_subMode] @ get subMode flags
mov r3, #0 @ r3<- NULL
str r3, [rSELF, #offThread_exception] @ self->exception = NULL
@ Special subMode?
cmp r2, #0 @ any special subMode handling needed?
bne 7f @ go if so
8:
/* set up args and a local for "&fp" */
/* (str sp, [sp, #-4]! would be perfect here, but is discouraged) */
str rFP, [sp, #-4]! @ *--sp = fp
mov ip, sp @ ip<- &fp
mov r3, #0 @ r3<- false
str ip, [sp, #-4]! @ *--sp = &fp
ldr r1, [rSELF, #offThread_method] @ r1<- self->method
mov r0, rSELF @ r0<- self
ldr r1, [r1, #offMethod_insns] @ r1<- method->insns
mov r2, r9 @ r2<- exception
sub r1, rPC, r1 @ r1<- pc - method->insns
mov r1, r1, asr #1 @ r1<- offset in code units
/* call, r0 gets catchRelPc (a code-unit offset) */
bl dvmFindCatchBlock @ call(self, relPc, exc, scan?, &fp)
/* fix earlier stack overflow if necessary; may trash rFP */
ldrb r1, [rSELF, #offThread_stackOverflowed]
cmp r1, #0 @ did we overflow earlier?
beq 1f @ no, skip ahead
mov rFP, r0 @ save relPc result in rFP
mov r0, rSELF @ r0<- self
mov r1, r9 @ r1<- exception
bl dvmCleanupStackOverflow @ call(self)
mov r0, rFP @ restore result
1:
/* update frame pointer and check result from dvmFindCatchBlock */
ldr rFP, [sp, #4] @ retrieve the updated rFP
cmp r0, #0 @ is catchRelPc < 0?
add sp, sp, #8 @ restore stack
bmi .LnotCaughtLocally
/* adjust locals to match self->interpSave.curFrame and updated PC */
SAVEAREA_FROM_FP(r1, rFP) @ r1<- new save area
ldr r1, [r1, #offStackSaveArea_method] @ r1<- new method
str r1, [rSELF, #offThread_method] @ self->method = new method
ldr r2, [r1, #offMethod_clazz] @ r2<- method->clazz
ldr r3, [r1, #offMethod_insns] @ r3<- method->insns
ldr r2, [r2, #offClassObject_pDvmDex] @ r2<- method->clazz->pDvmDex
add rPC, r3, r0, asl #1 @ rPC<- method->insns + catchRelPc
str r2, [rSELF, #offThread_methodClassDex] @ self->pDvmDex = meth...
/* release the tracked alloc on the exception */
mov r0, r9 @ r0<- exception
mov r1, rSELF @ r1<- self
bl dvmReleaseTrackedAlloc @ release the exception
/* restore the exception if the handler wants it */
ldr rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh rIBASE
FETCH_INST() @ load rINST from rPC
GET_INST_OPCODE(ip) @ extract opcode from rINST
cmp ip, #OP_MOVE_EXCEPTION @ is it "move-exception"?
streq r9, [rSELF, #offThread_exception] @ yes, restore the exception
GOTO_OPCODE(ip) @ jump to next instruction
@ Manage debugger bookkeeping
7:
str rPC, [rSELF, #offThread_pc] @ update interpSave.pc
str rFP, [rSELF, #offThread_curFrame] @ update interpSave.curFrame
mov r0, rSELF @ arg0<- self
mov r1, r9 @ arg1<- exception
bl dvmReportExceptionThrow @ (self, exception)
b 8b @ resume with normal handling
.LnotCaughtLocally: @ r9=exception
/* fix stack overflow if necessary */
ldrb r1, [rSELF, #offThread_stackOverflowed]
cmp r1, #0 @ did we overflow earlier?
movne r0, rSELF @ if yes: r0<- self
movne r1, r9 @ if yes: r1<- exception
blne dvmCleanupStackOverflow @ if yes: call(self)
@ may want to show "not caught locally" debug messages here
#if DVM_SHOW_EXCEPTION >= 2
/* call __android_log_print(prio, tag, format, ...) */
/* "Exception %s from %s:%d not caught locally" */
@ dvmLineNumFromPC(method, pc - method->insns)
ldr r0, [rSELF, #offThread_method]
ldr r1, [r0, #offMethod_insns]
sub r1, rPC, r1
asr r1, r1, #1
bl dvmLineNumFromPC
str r0, [sp, #-4]!
@ dvmGetMethodSourceFile(method)
ldr r0, [rSELF, #offThread_method]
bl dvmGetMethodSourceFile
str r0, [sp, #-4]!
@ exception->clazz->descriptor
ldr r3, [r9, #offObject_clazz]
ldr r3, [r3, #offClassObject_descriptor]
@
ldr r2, strExceptionNotCaughtLocally
0: add r2, pc
ldr r1, strLogTag
1: add r1, pc
mov r0, #3 @ LOG_DEBUG
bl __android_log_print
#endif
str r9, [rSELF, #offThread_exception] @ restore exception
mov r0, r9 @ r0<- exception
mov r1, rSELF @ r1<- self
bl dvmReleaseTrackedAlloc @ release the exception
b common_gotoBail @ bail out
strExceptionNotCaughtLocally:
.word PCREL_REF(.LstrExceptionNotCaughtLocally,0b)
strLogTag:
.word PCREL_REF(.LstrLogTag,1b)
/*
* Exception handling, calls through "glue code".
*/
.if 0
.LexceptionOld:
SAVE_PC_FP_TO_SELF() @ export state
mov r0, rSELF @ arg to function
bl dvmMterp_exceptionThrown
b common_resumeAfterGlueCall
.endif
#if defined(WITH_JIT)
/*
* If the JIT is actively building a trace we need to make sure
* that the field is fully resolved before including the current
* instruction.
*
* On entry:
* r10: &dvmDex->pResFields[field]
* r0: field pointer (must preserve)
*/
common_verifyField:
ldrh r3, [rSELF, #offThread_subMode] @ r3 <- submode byte
ands r3, #kSubModeJitTraceBuild
bxeq lr @ Not building trace, continue
ldr r1, [r10] @ r1<- reload resolved StaticField ptr
cmp r1, #0 @ resolution complete?
bxne lr @ yes, continue
stmfd sp!, {r0-r2,lr} @ save regs
mov r0, rSELF
mov r1, rPC
bl dvmJitEndTraceSelect @ (self,pc) end trace before this inst
ldmfd sp!, {r0-r2, lr}
bx lr @ return
#endif
/*
* After returning from a "glued" function, pull out the updated
* values and start executing at the next instruction.
*/
common_resumeAfterGlueCall:
LOAD_PC_FP_FROM_SELF() @ pull rPC and rFP out of thread
ldr rIBASE, [rSELF, #offThread_curHandlerTable] @ refresh
FETCH_INST() @ load rINST from rPC
GET_INST_OPCODE(ip) @ extract opcode from rINST
GOTO_OPCODE(ip) @ jump to next instruction
/*
* Invalid array index. Note that our calling convention is strange; we use r1
* and r3 because those just happen to be the registers all our callers are
* using. We move r3 before calling the C function, but r1 happens to match.
* r1: index
* r3: size
*/
common_errArrayIndex:
EXPORT_PC()
mov r0, r3
bl dvmThrowArrayIndexOutOfBoundsException
b common_exceptionThrown
/*
* Integer divide or mod by zero.
*/
common_errDivideByZero:
EXPORT_PC()
ldr r0, strDivideByZero
0: add r0, pc
bl dvmThrowArithmeticException
b common_exceptionThrown
strDivideByZero:
.word PCREL_REF(.LstrDivideByZero,0b)
/*
* Attempt to allocate an array with a negative size.
* On entry: length in r1
*/
common_errNegativeArraySize:
EXPORT_PC()
mov r0, r1 @ arg0 <- len
bl dvmThrowNegativeArraySizeException @ (len)
b common_exceptionThrown
/*
* Invocation of a non-existent method.
* On entry: method name in r1
*/
common_errNoSuchMethod:
EXPORT_PC()
mov r0, r1
bl dvmThrowNoSuchMethodError
b common_exceptionThrown
/*
* We encountered a null object when we weren't expecting one. We
* export the PC, throw a NullPointerException, and goto the exception
* processing code.
*/
common_errNullObject:
EXPORT_PC()
mov r0, #0
bl dvmThrowNullPointerException
b common_exceptionThrown
/*
* For debugging, cause an immediate fault. The source address will
* be in lr (use a bl instruction to jump here).
*/
common_abort:
ldr pc, .LdeadFood
.LdeadFood:
.word 0xdeadf00d
/*
* Spit out a "we were here", preserving all registers. (The attempt
* to save ip won't work, but we need to save an even number of
* registers for EABI 64-bit stack alignment.)
*/
.macro SQUEAK num
common_squeak\num:
stmfd sp!, {r0, r1, r2, r3, ip, lr}
ldr r0, strSqueak\num
0: add r0, pc
mov r1, #\num
bl printf
ldmfd sp!, {r0, r1, r2, r3, ip, lr}
bx lr
strSqueak\num:
.word PCREL_REF(.LstrSqueak,0b)
.endm
SQUEAK 0
SQUEAK 1
SQUEAK 2
SQUEAK 3
SQUEAK 4
SQUEAK 5
/*
* Spit out the number in r0, preserving registers.
*/
common_printNum:
stmfd sp!, {r0, r1, r2, r3, ip, lr}
mov r1, r0
ldr r0, strSqueak
0: add r0, pc
bl printf
ldmfd sp!, {r0, r1, r2, r3, ip, lr}
bx lr
strSqueak:
.word PCREL_REF(.LstrSqueak,0b)
/*
* Print a newline, preserving registers.
*/
common_printNewline:
stmfd sp!, {r0, r1, r2, r3, ip, lr}
ldr r0, strNewline
0: add r0, pc
bl printf
ldmfd sp!, {r0, r1, r2, r3, ip, lr}
bx lr
strNewline:
.word PCREL_REF(.LstrNewline,0b)
/*
* Print the 32-bit quantity in r0 as a hex value, preserving registers.
*/
common_printHex:
stmfd sp!, {r0, r1, r2, r3, ip, lr}
mov r1, r0
ldr r0, strPrintHex
0: add r0, pc
bl printf
ldmfd sp!, {r0, r1, r2, r3, ip, lr}
bx lr
strPrintHex:
.word PCREL_REF(.LstrPrintHex,0b)
/*
* Print the 64-bit quantity in r0-r1, preserving registers.
*/
common_printLong:
stmfd sp!, {r0, r1, r2, r3, ip, lr}
mov r3, r1
mov r2, r0
ldr r0, strPrintLong
0: add r0, pc
bl printf
ldmfd sp!, {r0, r1, r2, r3, ip, lr}
bx lr
strPrintLong:
.word PCREL_REF(.LstrPrintLong,0b)
/*
* Print full method info. Pass the Method* in r0. Preserves regs.
*/
common_printMethod:
stmfd sp!, {r0, r1, r2, r3, ip, lr}
bl dvmMterpPrintMethod
ldmfd sp!, {r0, r1, r2, r3, ip, lr}
bx lr
/*
* Call a C helper function that dumps regs and possibly some
* additional info. Requires the C function to be compiled in.
*/
.if 0
common_dumpRegs:
stmfd sp!, {r0, r1, r2, r3, ip, lr}
bl dvmMterpDumpArmRegs
ldmfd sp!, {r0, r1, r2, r3, ip, lr}
bx lr
.endif
#if 0
/*
* Experiment on VFP mode.
*
* uint32_t setFPSCR(uint32_t val, uint32_t mask)
*
* Updates the bits specified by "mask", setting them to the values in "val".
*/
setFPSCR:
and r0, r0, r1 @ make sure no stray bits are set
fmrx r2, fpscr @ get VFP reg
mvn r1, r1 @ bit-invert mask
and r2, r2, r1 @ clear masked bits
orr r2, r2, r0 @ set specified bits
fmxr fpscr, r2 @ set VFP reg
mov r0, r2 @ return new value
bx lr
.align 2
.global dvmConfigureFP
.type dvmConfigureFP, %function
dvmConfigureFP:
stmfd sp!, {ip, lr}
/* 0x03000000 sets DN/FZ */
/* 0x00009f00 clears the six exception enable flags */
bl common_squeak0
mov r0, #0x03000000 @ r0<- 0x03000000
add r1, r0, #0x9f00 @ r1<- 0x03009f00
bl setFPSCR
ldmfd sp!, {ip, pc}
#endif
/*
* Zero-terminated ASCII string data.
*
* On ARM we have two choices: do like gcc does, and LDR from a .word
* with the address, or use an ADR pseudo-op to get the address
* directly. ADR saves 4 bytes and an indirection, but it's using a
* PC-relative addressing mode and hence has a limited range, which
* makes it not work well with mergeable string sections.
*/
.section .rodata.str1.4,"aMS",%progbits,1
.LstrBadEntryPoint:
.asciz "Bad entry point %d\n"
.LstrFilledNewArrayNotImpl:
.asciz "filled-new-array only implemented for objects and 'int'"
.LstrDivideByZero:
.asciz "divide by zero"
.LstrLogTag:
.asciz "mterp"
.LstrExceptionNotCaughtLocally:
.asciz "Exception %s from %s:%d not caught locally\n"
.LstrNewline:
.asciz "\n"
.LstrSqueak:
.asciz "<%d>"
.LstrPrintHex:
.asciz "<%#x>"
.LstrPrintLong:
.asciz "<%lld>"