/******************************************************************************
*
* Copyright (C) 2005-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains the HID host action functions.
*
******************************************************************************/
#include "bt_target.h"
#if defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE)
#include <string.h>
#include "bta_sys.h"
#include "btm_api.h"
#include "l2c_api.h"
#include "bta_hh_int.h"
#include "bta_hh_co.h"
/*****************************************************************************
** Constants
*****************************************************************************/
/*****************************************************************************
** Local Function prototypes
*****************************************************************************/
static void bta_hh_cback (UINT8 dev_handle, UINT8 event, UINT32 data,
BT_HDR *pdata);
static tBTA_HH_STATUS bta_hh_get_trans_status(UINT32 result);
#if BTA_HH_DEBUG
static char* bta_hh_get_w4_event(UINT16 event);
static char * bta_hh_hid_event_name(UINT16 event);
#endif
/*****************************************************************************
** Action Functions
*****************************************************************************/
/*******************************************************************************
**
** Function bta_hh_api_enable
**
** Description Perform necessary operations to enable HID host.
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_api_enable(tBTA_HH_DATA *p_data)
{
tBTA_HH_STATUS status = BTA_HH_ERR;
UINT8 xx;
/* initialize BTE HID */
HID_HostInit();
memset(&bta_hh_cb, 0, sizeof(tBTA_HH_CB));
HID_HostSetSecurityLevel("", p_data->api_enable.sec_mask);
/* Register with L2CAP */
if ( HID_HostRegister (bta_hh_cback) == HID_SUCCESS)
{
/* store parameters */
bta_hh_cb.p_cback = p_data->api_enable.p_cback;
status = BTA_HH_OK;
/* initialize device CB */
for (xx = 0; xx < BTA_HH_MAX_DEVICE; xx ++)
{
bta_hh_cb.kdev[xx].state = BTA_HH_IDLE_ST;
bta_hh_cb.kdev[xx].hid_handle = BTA_HH_INVALID_HANDLE;
bta_hh_cb.kdev[xx].index = xx;
}
/* initialize control block map */
for (xx = 0; xx < BTA_HH_MAX_KNOWN; xx ++)
bta_hh_cb.cb_index[xx] = BTA_HH_IDX_INVALID;
}
/* signal BTA call back event */
(* bta_hh_cb.p_cback)(BTA_HH_ENABLE_EVT, (tBTA_HH *)&status);
}
/*******************************************************************************
**
** Function bta_hh_api_disable
**
** Description Perform necessary operations to disable HID host.
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_api_disable(void)
{
UINT8 xx;
/* service is not enabled */
if (bta_hh_cb.p_cback == NULL)
return;
/* no live connection, signal DISC_CMPL_EVT directly */
if (!bta_hh_cb.cnt_num)
{
bta_hh_disc_cmpl();
}
else /* otherwise, disconnect all live connections */
{
bta_hh_cb.w4_disable = TRUE;
for(xx = 0; xx < BTA_HH_MAX_DEVICE; xx ++)
{
/* send API_CLOSE event to every connected device */
if ( bta_hh_cb.kdev[xx].state == BTA_HH_CONN_ST )
{
/* disconnect all connected devices */
bta_hh_sm_execute(&bta_hh_cb.kdev[xx],
BTA_HH_API_CLOSE_EVT,
NULL);
}
}
}
return;
}
/*******************************************************************************
**
** Function bta_hh_disc_cmpl
**
** Description All connections have been closed, disable service.
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_disc_cmpl(void)
{
tBTA_HH_STATUS status = BTA_HH_OK;
/* Deregister with lower layer */
if (HID_HostDeregister()!= HID_SUCCESS)
status = BTA_HH_ERR;
bta_hh_cleanup_disable(status);
}
/*******************************************************************************
**
** Function bta_hh_sdp_cback
**
** Description SDP callback function.
**
** Returns void
**
*******************************************************************************/
static void bta_hh_sdp_cback(UINT16 result, UINT16 attr_mask,
tHID_DEV_SDP_INFO *sdp_rec )
{
tBTA_HH_DEV_CB *p_cb = bta_hh_cb.p_cur;
UINT8 hdl;
tBTA_HH_STATUS status = BTA_HH_ERR_SDP;
/* make sure sdp succeeded and hh has not been disabled */
if ((result == SDP_SUCCESS) && (p_cb != NULL))
{
/* security is required for the connection, add attr_mask bit*/
if (p_cb->sec_mask)
attr_mask |= HID_SEC_REQUIRED;
#if BTA_HH_DEBUG
APPL_TRACE_EVENT3("bta_hh_sdp_cback: p_cb: %d result 0x%02x, \
attr_mask 0x%02x", \
p_cb, result, attr_mask);
#endif
/* check to see type of device is supported , and should not been added before */
if (bta_hh_tod_spt(p_cb, sdp_rec->sub_class))
{
/* if not added before */
if (p_cb->hid_handle == BTA_HH_INVALID_HANDLE)
{
/* add device/update attr_mask information */
if(HID_HostAddDev (p_cb->addr, attr_mask, &hdl) == HID_SUCCESS)
{
status = BTA_HH_OK;
/* update cb_index[] map */
bta_hh_cb.cb_index[hdl] = p_cb->index;
}
else
{
p_cb->app_id = 0;
}
}
/* else : incoming connection after SDP should update the SDP information as well */
if (p_cb->app_id != 0)
{
/* update cb information with attr_mask, dscp_info etc. */
bta_hh_add_device_to_list(p_cb, hdl, attr_mask,
&sdp_rec->dscp_info,
sdp_rec->sub_class,
sdp_rec->ssr_max_latency,
sdp_rec->ssr_min_tout,
p_cb->app_id);
p_cb->dscp_info.ctry_code = sdp_rec->ctry_code;
status = BTA_HH_OK;
}
}
else /* type of device is not supported */
status = BTA_HH_ERR_TOD_UNSPT;
}
/* free disc_db when SDP is completed */
utl_freebuf((void **)&bta_hh_cb.p_disc_db);
/* send SDP_CMPL_EVT into state machine */
bta_hh_sm_execute(p_cb, BTA_HH_SDP_CMPL_EVT, (tBTA_HH_DATA *)&status);
return;
}
/*******************************************************************************
**
** Function bta_hh_di_sdp_cback
**
** Description SDP DI callback function.
**
** Returns void
**
*******************************************************************************/
static void bta_hh_di_sdp_cback(UINT16 result)
{
tBTA_HH_DEV_CB *p_cb = bta_hh_cb.p_cur;
tBTA_HH_STATUS status = BTA_HH_ERR_SDP;
tSDP_DI_GET_RECORD di_rec;
tHID_STATUS ret;
#if BTA_HH_DEBUG
APPL_TRACE_EVENT2("bta_hh_di_sdp_cback: p_cb: %d result 0x%02x", p_cb, result);
#endif
/* if DI record does not exist on remote device, vendor_id in tBTA_HH_DEV_DSCP_INFO will be
* set to 0xffff and we will allow the connection to go through. Spec mandates that DI
* record be set, but many HID devices do not set this. So for IOP purposes, we allow the
* connection to go through and update the DI record to invalid DI entry.*/
if (((result == SDP_SUCCESS) || (result == SDP_NO_RECS_MATCH)) && (p_cb != NULL))
{
if(result == SDP_SUCCESS && SDP_GetNumDiRecords(bta_hh_cb.p_disc_db) != 0)
{
/* always update information with primary DI record */
if (SDP_GetDiRecord(1, &di_rec, bta_hh_cb.p_disc_db) == SDP_SUCCESS)
{
bta_hh_update_di_info(p_cb, di_rec.rec.vendor, di_rec.rec.product, di_rec.rec.version, 0);
}
}
else /* no DI recrod available */
{
bta_hh_update_di_info(p_cb, BTA_HH_VENDOR_ID_INVALID, 0, 0, 0);
}
if ((ret = HID_HostGetSDPRecord(p_cb->addr,
bta_hh_cb.p_disc_db,
p_bta_hh_cfg->sdp_db_size,
bta_hh_sdp_cback)) == HID_SUCCESS)
{
status = BTA_HH_OK;
}
else
{
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG1 ("bta_hh_di_sdp_cback: HID_HostGetSDPRecord failed: Status 0x%2x",
ret);
#endif
}
}
if (status != BTA_HH_OK)
{
utl_freebuf((void **)&bta_hh_cb.p_disc_db);
/* send SDP_CMPL_EVT into state machine */
bta_hh_sm_execute(p_cb, BTA_HH_SDP_CMPL_EVT, (tBTA_HH_DATA *)&status);
}
return;
}
/*******************************************************************************
**
** Function bta_hh_start_sdp
**
** Description Start SDP service search, and obtain necessary SDP records.
** Only one SDP service search request is allowed at the same
** time. For every BTA_HhOpen API call, do SDP first unless SDP
** has been done previously.
**
** Returns void
**
*******************************************************************************/
void bta_hh_start_sdp(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
{
tBTA_HH_STATUS status = BTA_HH_ERR_SDP;
UINT8 hdl;
p_cb->sec_mask = p_data->api_conn.sec_mask;
p_cb->mode = p_data->api_conn.mode;
bta_hh_cb.p_cur = p_cb;
/* if previously virtually cabled device, skip SDP */
if (p_cb->app_id)
{
status = BTA_HH_OK;
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG0("bta_hh_start_sdp:: skip SDP for known devices");
#endif
if (p_cb->hid_handle == BTA_HH_INVALID_HANDLE)
{
if ((HID_HostAddDev (p_cb->addr, p_cb->attr_mask, &hdl)) \
== HID_SUCCESS)
{
/* update device CB with newly register device handle */
bta_hh_add_device_to_list(p_cb, hdl, p_cb->attr_mask, NULL,
p_cb->sub_class,
p_cb->dscp_info.ssr_max_latency,
p_cb->dscp_info.ssr_min_tout,
p_cb->app_id);
/* update cb_index[] map */
bta_hh_cb.cb_index[hdl] = p_cb->index;
}
else
status = BTA_HH_ERR_NO_RES;
}
bta_hh_sm_execute(p_cb, BTA_HH_SDP_CMPL_EVT, (tBTA_HH_DATA *)&status);
return;
}
/* GetSDPRecord. at one time only one SDP precedure can be active */
else if (!bta_hh_cb.p_disc_db)
{
bta_hh_cb.p_disc_db = (tSDP_DISCOVERY_DB *) GKI_getbuf(p_bta_hh_cfg->sdp_db_size);
if (bta_hh_cb.p_disc_db == NULL)
{
status = BTA_HH_ERR_NO_RES;
}
else
{
bta_hh_cb.p_cur = p_cb;
/* do DI discovery first */
if (SDP_DiDiscover(p_data->api_conn.bd_addr,
bta_hh_cb.p_disc_db,
p_bta_hh_cfg->sdp_db_size,
bta_hh_di_sdp_cback) != SDP_SUCCESS)
{
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG1 ("bta_hh_start_sdp: SDP_DiDiscover failed: \
Status 0x%2X",status);
#endif
status = BTA_HH_ERR_SDP;
utl_freebuf((void **)&bta_hh_cb.p_disc_db);
}
else
status = BTA_HH_OK;
}
}
if (status != BTA_HH_OK)
bta_hh_sm_execute(p_cb, BTA_HH_SDP_CMPL_EVT, (tBTA_HH_DATA *)&status);
return;
}
/*******************************************************************************
**
** Function bta_hh_sdp_cmpl
**
** Description When SDP completed, initiate a connection or report error depend
** on SDP result.
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_sdp_cmpl(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
{
tBTA_HH_CONN conn_dat;
tBTA_HH_STATUS status = p_data->status;
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG1 ("bta_hh_sdp_cmpl: status 0x%2X",p_data->status);
#endif
/* initialize call back data */
memset((void *)&conn_dat, 0, sizeof(tBTA_HH_CONN));
conn_dat.handle = p_cb->hid_handle;
bdcpy(conn_dat.bda, p_cb->addr);
/* if SDP compl success */
if ( status == BTA_HH_OK)
{
/* not incoming connection doing SDP, initiate a HID connection */
if (!p_cb->incoming_conn)
{
tHID_STATUS ret;
/* set security level */
HID_HostSetSecurityLevel("", p_cb->sec_mask);
/* open HID connection */
if ((ret = HID_HostOpenDev (p_cb->hid_handle)) != HID_SUCCESS)
{
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG1 ("bta_hh_sdp_cmpl: HID_HostOpenDev failed: \
Status 0x%2X",ret);
#endif
/* open fail, remove device from management device list */
HID_HostRemoveDev( p_cb->hid_handle);
status = BTA_HH_ERR;
}
else
{
status = BTA_HH_OK;
}
}
else /* incoming connection SDP finish */
{
bta_hh_sm_execute(p_cb, BTA_HH_OPEN_CMPL_EVT, NULL);
}
}
if (status != BTA_HH_OK)
{
conn_dat.status = status;
(* bta_hh_cb.p_cback)(BTA_HH_OPEN_EVT, (tBTA_HH *)&conn_dat);
/* move state machine W4_CONN ->IDLE */
bta_hh_sm_execute(p_cb, BTA_HH_API_CLOSE_EVT, NULL);
/* if this is an outgoing connection to an unknown device, clean up cb */
if (p_cb->app_id == 0 && !p_cb->incoming_conn)
{
/* clean up device control block */
bta_hh_clean_up_kdev(p_cb);
}
#if BTA_HH_DEBUG
bta_hh_trace_dev_db();
#endif
}
return;
}
/*******************************************************************************
**
** Function bta_hh_api_disc_act
**
** Description HID Host initiate a disconnection.
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_api_disc_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
{
tBTA_HH_CBDATA disc_dat;
tHID_STATUS status;
/* found an active connection */
disc_dat.handle = p_data ?(UINT8)p_data->hdr.layer_specific :p_cb->hid_handle;
disc_dat.status = BTA_HH_ERR;
status = HID_HostCloseDev(disc_dat.handle);
if (status)
(* bta_hh_cb.p_cback)(BTA_HH_CLOSE_EVT, (tBTA_HH *)&disc_dat);
return;
}
/*******************************************************************************
**
** Function bta_hh_open_cmpl_act
**
** Description HID host connection completed
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_open_cmpl_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
{
tBTA_HH_CONN conn ;
UINT8 dev_handle = p_data ? (UINT8)p_data->hid_cback.hdr.layer_specific : \
p_cb->hid_handle;
memset((void *)&conn, 0, sizeof (tBTA_HH_CONN));
conn.handle = dev_handle;
bdcpy(conn.bda, p_cb->addr);
/* increase connection number */
bta_hh_cb.cnt_num ++;
/* initialize device driver */
bta_hh_co_open(p_cb->hid_handle, p_cb->sub_class,
p_cb->attr_mask, p_cb->app_id);
/* set protocol mode when not default report mode */
if (p_cb->mode != BTA_HH_PROTO_RPT_MODE)
{
if ((HID_HostWriteDev(dev_handle,
HID_TRANS_SET_PROTOCOL, HID_PAR_PROTOCOL_BOOT_MODE,
0,
0, NULL)) != HID_SUCCESS)
{
/* HID connection is up, while SET_PROTO fail */
conn.status = BTA_HH_ERR_PROTO;
(* bta_hh_cb.p_cback)(BTA_HH_OPEN_EVT, (tBTA_HH *)&conn);
}
else
{
conn.status = BTA_HH_OK;
p_cb->w4_evt = BTA_HH_OPEN_EVT;
}
}
else
(* bta_hh_cb.p_cback)(BTA_HH_OPEN_EVT, (tBTA_HH *)&conn);
p_cb->incoming_conn = FALSE;
}
/*******************************************************************************
**
** Function bta_hh_open_act
**
** Description HID host receive HID_OPEN_EVT .
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_open_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
{
tBTA_HH_API_CONN conn_data;
#if BTA_HH_DEBUG
UINT8 dev_handle = p_data ? (UINT8)p_data->hid_cback.hdr.layer_specific : \
p_cb->hid_handle;
APPL_TRACE_EVENT1 ("bta_hh_open_act: Device[%d] connected", dev_handle);
#endif
/* SDP has been done */
if (p_cb->app_id != 0)
{
bta_hh_sm_execute(p_cb, BTA_HH_OPEN_CMPL_EVT, p_data);
}
else
/* app_id == 0 indicates an incoming conenction request arrives without SDP
performed, do it first */
{
p_cb->incoming_conn = TRUE;
memset(&conn_data, 0, sizeof(tBTA_HH_API_CONN));
bdcpy(conn_data.bd_addr, p_cb->addr);
bta_hh_start_sdp(p_cb, (tBTA_HH_DATA *)&conn_data);
}
return;
}
/*******************************************************************************
**
** Function bta_hh_data_act
**
** Description HID Host process a data report
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_data_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA * p_data)
{
BT_HDR *pdata = p_data->hid_cback.p_data;
UINT8 *p_rpt = (UINT8 *)(pdata + 1) + pdata->offset;
bta_hh_co_data((UINT8)p_data->hid_cback.hdr.layer_specific, p_rpt, pdata->len,
p_cb->mode, p_cb->sub_class, p_cb->dscp_info.ctry_code, p_cb->addr, p_cb->app_id);
utl_freebuf((void **)&pdata);
}
/*******************************************************************************
**
** Function bta_hh_handsk_act
**
** Description HID Host process a handshake acknoledgement.
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_handsk_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA * p_data)
{
tBTA_HH_CBDATA cback_data ;
tBTA_HH_HSDATA hs_data;
tBTA_HH_CONN conn ;
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG2("HANDSHAKE received for: event = %s data= %d",
bta_hh_get_w4_event(p_cb->w4_evt), p_data->hid_cback.data);
#endif
memset(&hs_data, 0, sizeof(tBTA_HH_HSDATA));
switch (p_cb->w4_evt)
{
/* GET_ transsaction, handshake indicate unsupported request */
case BTA_HH_GET_PROTO_EVT:
hs_data.rsp_data.proto_mode = BTA_HH_PROTO_UNKNOWN;
/* fall through */
case BTA_HH_GET_RPT_EVT:
case BTA_HH_GET_IDLE_EVT :
hs_data.handle = p_cb->hid_handle;
/* if handshake gives an OK code for these transaction, fill in UNSUPT */
if ((hs_data.status = bta_hh_get_trans_status(p_data->hid_cback.data)) == BTA_HH_OK)
hs_data.status = BTA_HH_HS_TRANS_NOT_SPT;
(* bta_hh_cb.p_cback)(p_cb->w4_evt, (tBTA_HH *)&hs_data);
p_cb->w4_evt = 0;
break;
/* acknoledgement from HID device for SET_ transaction */
case BTA_HH_SET_RPT_EVT:
case BTA_HH_SET_PROTO_EVT:
case BTA_HH_SET_IDLE_EVT :
cback_data.handle = p_cb->hid_handle;
cback_data.status = bta_hh_get_trans_status(p_data->hid_cback.data);
(* bta_hh_cb.p_cback)(p_cb->w4_evt, (tBTA_HH *)&cback_data);
p_cb->w4_evt = 0;
break;
/* SET_PROTOCOL when open connection */
case BTA_HH_OPEN_EVT:
conn.status =p_data->hid_cback.data ? BTA_HH_ERR_PROTO: BTA_HH_OK;
conn.handle = p_cb->hid_handle;
bdcpy(conn.bda, p_cb->addr);
(* bta_hh_cb.p_cback)(p_cb->w4_evt, (tBTA_HH *)&conn);
#if BTA_HH_DEBUG
bta_hh_trace_dev_db();
#endif
p_cb->w4_evt = 0;
break;
default:
/* unknow transaction handshake response */
APPL_TRACE_DEBUG0("unknown transaction type");
break;
}
/* transaction achknoledgement received, inform PM for mode change */
bta_sys_idle(BTA_ID_HH, p_cb->app_id, p_cb->addr);
return;
}
/*******************************************************************************
**
** Function bta_hh_ctrl_dat_act
**
** Description HID Host process a data report from control channel.
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_ctrl_dat_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA * p_data)
{
BT_HDR *pdata = p_data->hid_cback.p_data;
UINT8 *data = (UINT8 *)(pdata + 1) + pdata->offset;
tBTA_HH_HSDATA hs_data;
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG1("Ctrl DATA received w4: event[%s]",
bta_hh_get_w4_event(p_cb->w4_evt));
#endif
hs_data.status = BTA_HH_OK;
hs_data.handle = p_cb->hid_handle;
switch (p_cb->w4_evt)
{
case BTA_HH_GET_IDLE_EVT:
hs_data.rsp_data.idle_rate = *data;
break;
case BTA_HH_GET_RPT_EVT:
hs_data.rsp_data.p_rpt_data = pdata;
break;
case BTA_HH_GET_PROTO_EVT:
/* match up BTE/BTA report/boot mode def*/
hs_data.rsp_data.proto_mode = ((*data) == HID_PAR_PROTOCOL_REPORT)? \
BTA_HH_PROTO_RPT_MODE : BTA_HH_PROTO_BOOT_MODE;
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG1("GET_PROTOCOL Mode = [%s]",
(hs_data.rsp_data.proto_mode == BTA_HH_PROTO_RPT_MODE)? "Report" : "Boot");
#endif
break;
/* should not expect control DATA for SET_ transaction */
case BTA_HH_SET_PROTO_EVT:
/* fall through */
case BTA_HH_SET_RPT_EVT:
/* fall through */
case BTA_HH_SET_IDLE_EVT :
/* fall through */
default:
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG1("invalid transaction type for DATA payload: 4_evt[%s]",
bta_hh_get_w4_event(p_cb->w4_evt));
#endif
break;
}
/* inform PM for mode change */
bta_sys_busy(BTA_ID_HH, p_cb->app_id, p_cb->addr);
bta_sys_idle(BTA_ID_HH, p_cb->app_id, p_cb->addr);
(* bta_hh_cb.p_cback)(p_cb->w4_evt, (tBTA_HH *)&hs_data);
p_cb->w4_evt = 0;
utl_freebuf((void **)&pdata);
}
/*******************************************************************************
**
** Function bta_hh_close_act
**
** Description HID Host process a close event
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_close_act (tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
{
tBTA_HH_CONN conn_dat ;
tBTA_HH_CBDATA disc_dat = {BTA_HH_OK, 0};
UINT32 reason = p_data->hid_cback.data; /* Reason for closing (32-bit) */
/* if HID_HDEV_EVT_VC_UNPLUG was received, report BTA_HH_VC_UNPLUG_EVT */
UINT16 event = p_cb->vp ? BTA_HH_VC_UNPLUG_EVT : BTA_HH_CLOSE_EVT;
disc_dat.handle = p_cb->hid_handle;
disc_dat.status = p_data->hid_cback.data;
/* Check reason for closing */
if ((reason & (HID_L2CAP_CONN_FAIL|HID_L2CAP_REQ_FAIL)) || /* Failure to initialize connection (page timeout or l2cap error) */
(reason == HID_ERR_AUTH_FAILED) || /* Authenication error (while initiating) */
(reason == HID_ERR_L2CAP_FAILED)) /* Failure creating l2cap connection */
{
/* Failure in opening connection */
conn_dat.handle = p_cb->hid_handle;
conn_dat.status = (reason == HID_ERR_AUTH_FAILED) ? BTA_HH_ERR_AUTH_FAILED : BTA_HH_ERR;
bdcpy(conn_dat.bda, p_cb->addr);
HID_HostCloseDev(p_cb->hid_handle);
/* Report OPEN fail event */
(*bta_hh_cb.p_cback)(BTA_HH_OPEN_EVT, (tBTA_HH *)&conn_dat);
#if BTA_HH_DEBUG
bta_hh_trace_dev_db();
#endif
return;
}
/* otherwise report CLOSE/VC_UNPLUG event */
else
{
/* finaliza device driver */
bta_hh_co_close(p_cb->hid_handle, p_cb->app_id);
/* inform role manager */
bta_sys_conn_close( BTA_ID_HH ,p_cb->app_id, p_cb->addr);
/* update total conn number */
bta_hh_cb.cnt_num --;
if (disc_dat.status)
disc_dat.status = BTA_HH_ERR;
(*bta_hh_cb.p_cback)(event, (tBTA_HH *)&disc_dat);
/* if virtually unplug, remove device */
if (p_cb->vp )
{
HID_HostRemoveDev( p_cb->hid_handle);
bta_hh_clean_up_kdev(p_cb);
}
#if BTA_HH_DEBUG
bta_hh_trace_dev_db();
#endif
}
/* clean up control block, but retain SDP info and device handle */
p_cb->vp = FALSE;
p_cb->w4_evt = 0;
/* if no connection is active and HH disable is signaled, disable service */
if (bta_hh_cb.cnt_num == 0 && bta_hh_cb.w4_disable)
{
bta_hh_disc_cmpl();
}
return;
}
/*******************************************************************************
**
** Function bta_hh_get_dscp_act
**
** Description Get device report descriptor
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_get_dscp_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
{
(*bta_hh_cb.p_cback)(BTA_HH_GET_DSCP_EVT, (tBTA_HH *)&p_cb->dscp_info);
}
/*******************************************************************************
**
** Function bta_hh_maint_dev_act
**
** Description HID Host maintain device list.
**
**
** Returns void
**
*******************************************************************************/
void bta_hh_maint_dev_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
{
tBTA_HH_MAINT_DEV *p_dev_info = &p_data->api_maintdev;
tBTA_HH_DEV_INFO dev_info ;
UINT8 dev_handle;
dev_info.status = BTA_HH_ERR;
dev_info.handle = BTA_HH_INVALID_HANDLE;
switch (p_dev_info->sub_event)
{
case BTA_HH_ADD_DEV_EVT: /* add a device */
bdcpy(dev_info.bda, p_dev_info->bda);
/* initialize callback data */
if (p_cb->hid_handle == BTA_HH_INVALID_HANDLE)
{
if (HID_HostAddDev(p_dev_info->bda, p_dev_info->attr_mask, &dev_handle)\
== HID_SUCCESS)
{
dev_info.handle = dev_handle;
dev_info.status = BTA_HH_OK;
/* update DI information */
bta_hh_update_di_info(p_cb,
p_dev_info->dscp_info.vendor_id,
p_dev_info->dscp_info.product_id,
p_dev_info->dscp_info.version,
0);
/* add to BTA device list */
bta_hh_add_device_to_list(p_cb, dev_handle,
p_dev_info->attr_mask,
&p_dev_info->dscp_info.descriptor,
p_dev_info->sub_class,
p_dev_info->dscp_info.ssr_max_latency,
p_dev_info->dscp_info.ssr_min_tout,
p_dev_info->app_id);
/* update cb_index[] map */
bta_hh_cb.cb_index[dev_handle] = p_cb->index;
}
}
else /* device already been added */
{
dev_info.handle = p_cb->hid_handle;
dev_info.status = BTA_HH_OK;
}
#if BTA_HH_DEBUG
bta_hh_trace_dev_db();
#endif
break;
case BTA_HH_RMV_DEV_EVT: /* remove device */
dev_info.handle = (UINT8)p_dev_info->hdr.layer_specific;
bdcpy(dev_info.bda, p_cb->addr);
{
if(HID_HostRemoveDev( dev_info.handle ) == HID_SUCCESS)
{
dev_info.status = BTA_HH_OK;
/* remove from known device list in BTA */
bta_hh_clean_up_kdev(p_cb);
}
}
break;
default:
APPL_TRACE_DEBUG0("invalid command");
break;
}
(* bta_hh_cb.p_cback)(p_dev_info->sub_event, (tBTA_HH *)&dev_info);
}
/*******************************************************************************
**
** Function bta_hh_write_dev_act
**
** Description Write device action. can be SET/GET/DATA transaction.
**
** Returns void
**
*******************************************************************************/
void bta_hh_write_dev_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
{
tBTA_HH_CBDATA cbdata = {BTA_HH_OK, 0};
UINT16 event = (p_data->api_sndcmd.t_type - BTA_HH_FST_BTE_TRANS_EVT) +
BTA_HH_FST_TRANS_CB_EVT;
cbdata.handle = p_cb->hid_handle;
/* match up BTE/BTA report/boot mode def */
if (p_data->api_sndcmd.t_type == HID_TRANS_SET_PROTOCOL)
{
p_data->api_sndcmd.param = ( p_data->api_sndcmd.param == BTA_HH_PROTO_RPT_MODE) ?\
HID_PAR_PROTOCOL_REPORT :HID_PAR_PROTOCOL_BOOT_MODE;
}
if (HID_HostWriteDev (p_cb->hid_handle,
p_data->api_sndcmd.t_type,
p_data->api_sndcmd.param,
p_data->api_sndcmd.data,
p_data->api_sndcmd.rpt_id,
p_data->api_sndcmd.p_data) != HID_SUCCESS)
{
APPL_TRACE_ERROR0("HID_HostWriteDev Error ");
cbdata.status = BTA_HH_ERR;
if (p_data->api_sndcmd.t_type != HID_TRANS_CONTROL &&
p_data->api_sndcmd.t_type != HID_TRANS_DATA)
(* bta_hh_cb.p_cback)(event, (tBTA_HH *)&cbdata);
else if (p_data->api_sndcmd.param == BTA_HH_CTRL_VIRTUAL_CABLE_UNPLUG)
(* bta_hh_cb.p_cback)(BTA_HH_VC_UNPLUG_EVT, (tBTA_HH *)&cbdata);
}
else
{
switch(p_data->api_sndcmd.t_type)
{
case HID_TRANS_SET_PROTOCOL:
/* fall through */
case HID_TRANS_GET_REPORT:
/* fall through */
case HID_TRANS_SET_REPORT:
/* fall through */
case HID_TRANS_GET_PROTOCOL:
/* fall through */
case HID_TRANS_GET_IDLE:
/* fall through */
case HID_TRANS_SET_IDLE:/* set w4_handsk event name for callback function use */
p_cb->w4_evt = event;
break;
case HID_TRANS_DATA: /* output report */
/* fall through */
case HID_TRANS_CONTROL:
/* no handshake event will be generated */
/* if VC_UNPLUG is issued, set flag */
if (p_data->api_sndcmd.param == BTA_HH_CTRL_VIRTUAL_CABLE_UNPLUG)
p_cb->vp = TRUE;
break;
/* currently not expected */
case HID_TRANS_DATAC:
default:
APPL_TRACE_DEBUG1("bta_hh_write_dev_act:: cmd type = %d",
p_data->api_sndcmd.t_type);
break;
}
/* if not control type transaction, notify PM for energy control */
if (p_data->api_sndcmd.t_type != HID_TRANS_CONTROL)
{
/* inform PM for mode change */
bta_sys_busy(BTA_ID_HH, p_cb->app_id, p_cb->addr);
bta_sys_idle(BTA_ID_HH, p_cb->app_id, p_cb->addr);
}
else if (p_data->api_sndcmd.param == BTA_HH_CTRL_SUSPEND)
{
bta_sys_sco_close(BTA_ID_HH, p_cb->app_id, p_cb->addr);
}
else if (p_data->api_sndcmd.param == BTA_HH_CTRL_EXIT_SUSPEND)
{
bta_sys_busy(BTA_ID_HH, p_cb->app_id, p_cb->addr);
}
}
return;
}
/*****************************************************************************
** Static Function
*****************************************************************************/
/*******************************************************************************
**
** Function bta_hh_cback
**
** Description BTA HH callback function.
**
**
** Returns void
**
*******************************************************************************/
static void bta_hh_cback (UINT8 dev_handle, UINT8 event, UINT32 data,
BT_HDR *pdata)
{
tBTA_HH_CBACK_DATA *p_buf = NULL;
UINT16 sm_event = BTA_HH_INVALID_EVT;
UINT8 xx = 0;
#if BTA_HH_DEBUG
APPL_TRACE_DEBUG1("bta_hh_cback::HID_event [%s]", bta_hh_hid_event_name(event));
#endif
switch (event)
{
case HID_HDEV_EVT_OPEN:
sm_event = BTA_HH_INT_OPEN_EVT;
break;
case HID_HDEV_EVT_CLOSE:
sm_event = BTA_HH_INT_CLOSE_EVT;
break;
case HID_HDEV_EVT_INTR_DATA:
sm_event = BTA_HH_INT_DATA_EVT;
break;
case HID_HDEV_EVT_HANDSHAKE:
sm_event = BTA_HH_INT_HANDSK_EVT;
break;
case HID_HDEV_EVT_CTRL_DATA:
sm_event = BTA_HH_INT_CTRL_DATA;
break;
case HID_HDEV_EVT_RETRYING:
break;
case HID_HDEV_EVT_INTR_DATC:
case HID_HDEV_EVT_CTRL_DATC:
/* Unhandled events: Free buffer for DATAC */
utl_freebuf((void **)&pdata);
break;
case HID_HDEV_EVT_VC_UNPLUG:
for (xx = 0; xx < BTA_HH_MAX_DEVICE; xx++)
{
if (bta_hh_cb.kdev[xx].hid_handle == dev_handle)
{
bta_hh_cb.kdev[xx].vp = TRUE;
break;
}
}
break;
}
if (sm_event != BTA_HH_INVALID_EVT &&
(p_buf = (tBTA_HH_CBACK_DATA *)GKI_getbuf(sizeof(tBTA_HH_CBACK_DATA) +
sizeof(BT_HDR))) != NULL)
{
p_buf->hdr.event = sm_event;
p_buf->hdr.layer_specific = (UINT16)dev_handle;
p_buf->data = data;
p_buf->p_data = pdata;
bta_sys_sendmsg(p_buf);
}
}
/*******************************************************************************
**
** Function bta_hh_get_trans_status
**
** Description translate a handshake result code into BTA HH
** status code
**
*******************************************************************************/
static tBTA_HH_STATUS bta_hh_get_trans_status(UINT32 result)
{
switch(result)
{
case HID_PAR_HANDSHAKE_RSP_SUCCESS : /* (0) */
return BTA_HH_OK;
case HID_PAR_HANDSHAKE_RSP_NOT_READY : /* (1) */
case HID_PAR_HANDSHAKE_RSP_ERR_INVALID_REP_ID: /* (2) */
case HID_PAR_HANDSHAKE_RSP_ERR_UNSUPPORTED_REQ : /* (3) */
case HID_PAR_HANDSHAKE_RSP_ERR_INVALID_PARAM : /* (4) */
return (tBTA_HH_STATUS)result;
case HID_PAR_HANDSHAKE_RSP_ERR_UNKNOWN : /* (14) */
case HID_PAR_HANDSHAKE_RSP_ERR_FATAL : /* (15) */
default:
return BTA_HH_HS_ERROR;
break;
}
}
/*****************************************************************************
** Debug Functions
*****************************************************************************/
#if (defined BTA_HH_DEBUG && BTA_HH_DEBUG == TRUE)
static char* bta_hh_get_w4_event(UINT16 event)
{
switch (event)
{
case BTA_HH_GET_RPT_EVT:
return "BTA_HH_GET_RPT_EVT";
case BTA_HH_SET_RPT_EVT:
return "BTA_HH_SET_RPT_EVT";
case BTA_HH_GET_PROTO_EVT:
return "BTA_HH_GET_PROTO_EVT";
case BTA_HH_SET_PROTO_EVT:
return "BTA_HH_SET_PROTO_EVT";
case BTA_HH_GET_IDLE_EVT:
return "BTA_HH_GET_IDLE_EVT";
case BTA_HH_SET_IDLE_EVT:
return "BTA_HH_SET_IDLE_EVT";
case BTA_HH_OPEN_EVT:
return "BTA_HH_OPEN_EVT";
default:
return "Unknown event";
}
}
static char * bta_hh_hid_event_name(UINT16 event)
{
switch (event)
{
case HID_HDEV_EVT_OPEN:
return "HID_HDEV_EVT_OPEN";
case HID_HDEV_EVT_CLOSE:
return "HID_HDEV_EVT_CLOSE";
case HID_HDEV_EVT_RETRYING:
return "HID_HDEV_EVT_RETRYING";
case HID_HDEV_EVT_INTR_DATA:
return "HID_HDEV_EVT_INTR_DATA";
case HID_HDEV_EVT_INTR_DATC:
return "HID_HDEV_EVT_INTR_DATC";
case HID_HDEV_EVT_CTRL_DATA:
return "HID_HDEV_EVT_CTRL_DATA";
case HID_HDEV_EVT_CTRL_DATC:
return "HID_HDEV_EVT_CTRL_DATC";
case HID_HDEV_EVT_HANDSHAKE:
return "HID_HDEV_EVT_HANDSHAKE";
case HID_HDEV_EVT_VC_UNPLUG:
return "HID_HDEV_EVT_VC_UNPLUG";
default:
return "Unknown HID event";
}
}
#endif
#endif /* BTA_HH_INCLUDED */