SUBROUTINE ZTPMV(UPLO,TRANS,DIAG,N,AP,X,INCX)
* .. Scalar Arguments ..
INTEGER INCX,N
CHARACTER DIAG,TRANS,UPLO
* ..
* .. Array Arguments ..
DOUBLE COMPLEX AP(*),X(*)
* ..
*
* Purpose
* =======
*
* ZTPMV performs one of the matrix-vector operations
*
* x := A*x, or x := A'*x, or x := conjg( A' )*x,
*
* where x is an n element vector and A is an n by n unit, or non-unit,
* upper or lower triangular matrix, supplied in packed form.
*
* Arguments
* ==========
*
* UPLO - CHARACTER*1.
* On entry, UPLO specifies whether the matrix is an upper or
* lower triangular matrix as follows:
*
* UPLO = 'U' or 'u' A is an upper triangular matrix.
*
* UPLO = 'L' or 'l' A is a lower triangular matrix.
*
* Unchanged on exit.
*
* TRANS - CHARACTER*1.
* On entry, TRANS specifies the operation to be performed as
* follows:
*
* TRANS = 'N' or 'n' x := A*x.
*
* TRANS = 'T' or 't' x := A'*x.
*
* TRANS = 'C' or 'c' x := conjg( A' )*x.
*
* Unchanged on exit.
*
* DIAG - CHARACTER*1.
* On entry, DIAG specifies whether or not A is unit
* triangular as follows:
*
* DIAG = 'U' or 'u' A is assumed to be unit triangular.
*
* DIAG = 'N' or 'n' A is not assumed to be unit
* triangular.
*
* Unchanged on exit.
*
* N - INTEGER.
* On entry, N specifies the order of the matrix A.
* N must be at least zero.
* Unchanged on exit.
*
* AP - COMPLEX*16 array of DIMENSION at least
* ( ( n*( n + 1 ) )/2 ).
* Before entry with UPLO = 'U' or 'u', the array AP must
* contain the upper triangular matrix packed sequentially,
* column by column, so that AP( 1 ) contains a( 1, 1 ),
* AP( 2 ) and AP( 3 ) contain a( 1, 2 ) and a( 2, 2 )
* respectively, and so on.
* Before entry with UPLO = 'L' or 'l', the array AP must
* contain the lower triangular matrix packed sequentially,
* column by column, so that AP( 1 ) contains a( 1, 1 ),
* AP( 2 ) and AP( 3 ) contain a( 2, 1 ) and a( 3, 1 )
* respectively, and so on.
* Note that when DIAG = 'U' or 'u', the diagonal elements of
* A are not referenced, but are assumed to be unity.
* Unchanged on exit.
*
* X - COMPLEX*16 array of dimension at least
* ( 1 + ( n - 1 )*abs( INCX ) ).
* Before entry, the incremented array X must contain the n
* element vector x. On exit, X is overwritten with the
* tranformed vector x.
*
* INCX - INTEGER.
* On entry, INCX specifies the increment for the elements of
* X. INCX must not be zero.
* Unchanged on exit.
*
* Further Details
* ===============
*
* Level 2 Blas routine.
*
* -- Written on 22-October-1986.
* Jack Dongarra, Argonne National Lab.
* Jeremy Du Croz, Nag Central Office.
* Sven Hammarling, Nag Central Office.
* Richard Hanson, Sandia National Labs.
*
* =====================================================================
*
* .. Parameters ..
DOUBLE COMPLEX ZERO
PARAMETER (ZERO= (0.0D+0,0.0D+0))
* ..
* .. Local Scalars ..
DOUBLE COMPLEX TEMP
INTEGER I,INFO,IX,J,JX,K,KK,KX
LOGICAL NOCONJ,NOUNIT
* ..
* .. External Functions ..
LOGICAL LSAME
EXTERNAL LSAME
* ..
* .. External Subroutines ..
EXTERNAL XERBLA
* ..
* .. Intrinsic Functions ..
INTRINSIC DCONJG
* ..
*
* Test the input parameters.
*
INFO = 0
IF (.NOT.LSAME(UPLO,'U') .AND. .NOT.LSAME(UPLO,'L')) THEN
INFO = 1
ELSE IF (.NOT.LSAME(TRANS,'N') .AND. .NOT.LSAME(TRANS,'T') .AND.
+ .NOT.LSAME(TRANS,'C')) THEN
INFO = 2
ELSE IF (.NOT.LSAME(DIAG,'U') .AND. .NOT.LSAME(DIAG,'N')) THEN
INFO = 3
ELSE IF (N.LT.0) THEN
INFO = 4
ELSE IF (INCX.EQ.0) THEN
INFO = 7
END IF
IF (INFO.NE.0) THEN
CALL XERBLA('ZTPMV ',INFO)
RETURN
END IF
*
* Quick return if possible.
*
IF (N.EQ.0) RETURN
*
NOCONJ = LSAME(TRANS,'T')
NOUNIT = LSAME(DIAG,'N')
*
* Set up the start point in X if the increment is not unity. This
* will be ( N - 1 )*INCX too small for descending loops.
*
IF (INCX.LE.0) THEN
KX = 1 - (N-1)*INCX
ELSE IF (INCX.NE.1) THEN
KX = 1
END IF
*
* Start the operations. In this version the elements of AP are
* accessed sequentially with one pass through AP.
*
IF (LSAME(TRANS,'N')) THEN
*
* Form x:= A*x.
*
IF (LSAME(UPLO,'U')) THEN
KK = 1
IF (INCX.EQ.1) THEN
DO 20 J = 1,N
IF (X(J).NE.ZERO) THEN
TEMP = X(J)
K = KK
DO 10 I = 1,J - 1
X(I) = X(I) + TEMP*AP(K)
K = K + 1
10 CONTINUE
IF (NOUNIT) X(J) = X(J)*AP(KK+J-1)
END IF
KK = KK + J
20 CONTINUE
ELSE
JX = KX
DO 40 J = 1,N
IF (X(JX).NE.ZERO) THEN
TEMP = X(JX)
IX = KX
DO 30 K = KK,KK + J - 2
X(IX) = X(IX) + TEMP*AP(K)
IX = IX + INCX
30 CONTINUE
IF (NOUNIT) X(JX) = X(JX)*AP(KK+J-1)
END IF
JX = JX + INCX
KK = KK + J
40 CONTINUE
END IF
ELSE
KK = (N* (N+1))/2
IF (INCX.EQ.1) THEN
DO 60 J = N,1,-1
IF (X(J).NE.ZERO) THEN
TEMP = X(J)
K = KK
DO 50 I = N,J + 1,-1
X(I) = X(I) + TEMP*AP(K)
K = K - 1
50 CONTINUE
IF (NOUNIT) X(J) = X(J)*AP(KK-N+J)
END IF
KK = KK - (N-J+1)
60 CONTINUE
ELSE
KX = KX + (N-1)*INCX
JX = KX
DO 80 J = N,1,-1
IF (X(JX).NE.ZERO) THEN
TEMP = X(JX)
IX = KX
DO 70 K = KK,KK - (N- (J+1)),-1
X(IX) = X(IX) + TEMP*AP(K)
IX = IX - INCX
70 CONTINUE
IF (NOUNIT) X(JX) = X(JX)*AP(KK-N+J)
END IF
JX = JX - INCX
KK = KK - (N-J+1)
80 CONTINUE
END IF
END IF
ELSE
*
* Form x := A'*x or x := conjg( A' )*x.
*
IF (LSAME(UPLO,'U')) THEN
KK = (N* (N+1))/2
IF (INCX.EQ.1) THEN
DO 110 J = N,1,-1
TEMP = X(J)
K = KK - 1
IF (NOCONJ) THEN
IF (NOUNIT) TEMP = TEMP*AP(KK)
DO 90 I = J - 1,1,-1
TEMP = TEMP + AP(K)*X(I)
K = K - 1
90 CONTINUE
ELSE
IF (NOUNIT) TEMP = TEMP*DCONJG(AP(KK))
DO 100 I = J - 1,1,-1
TEMP = TEMP + DCONJG(AP(K))*X(I)
K = K - 1
100 CONTINUE
END IF
X(J) = TEMP
KK = KK - J
110 CONTINUE
ELSE
JX = KX + (N-1)*INCX
DO 140 J = N,1,-1
TEMP = X(JX)
IX = JX
IF (NOCONJ) THEN
IF (NOUNIT) TEMP = TEMP*AP(KK)
DO 120 K = KK - 1,KK - J + 1,-1
IX = IX - INCX
TEMP = TEMP + AP(K)*X(IX)
120 CONTINUE
ELSE
IF (NOUNIT) TEMP = TEMP*DCONJG(AP(KK))
DO 130 K = KK - 1,KK - J + 1,-1
IX = IX - INCX
TEMP = TEMP + DCONJG(AP(K))*X(IX)
130 CONTINUE
END IF
X(JX) = TEMP
JX = JX - INCX
KK = KK - J
140 CONTINUE
END IF
ELSE
KK = 1
IF (INCX.EQ.1) THEN
DO 170 J = 1,N
TEMP = X(J)
K = KK + 1
IF (NOCONJ) THEN
IF (NOUNIT) TEMP = TEMP*AP(KK)
DO 150 I = J + 1,N
TEMP = TEMP + AP(K)*X(I)
K = K + 1
150 CONTINUE
ELSE
IF (NOUNIT) TEMP = TEMP*DCONJG(AP(KK))
DO 160 I = J + 1,N
TEMP = TEMP + DCONJG(AP(K))*X(I)
K = K + 1
160 CONTINUE
END IF
X(J) = TEMP
KK = KK + (N-J+1)
170 CONTINUE
ELSE
JX = KX
DO 200 J = 1,N
TEMP = X(JX)
IX = JX
IF (NOCONJ) THEN
IF (NOUNIT) TEMP = TEMP*AP(KK)
DO 180 K = KK + 1,KK + N - J
IX = IX + INCX
TEMP = TEMP + AP(K)*X(IX)
180 CONTINUE
ELSE
IF (NOUNIT) TEMP = TEMP*DCONJG(AP(KK))
DO 190 K = KK + 1,KK + N - J
IX = IX + INCX
TEMP = TEMP + DCONJG(AP(K))*X(IX)
190 CONTINUE
END IF
X(JX) = TEMP
JX = JX + INCX
KK = KK + (N-J+1)
200 CONTINUE
END IF
END IF
END IF
*
RETURN
*
* End of ZTPMV .
*
END