/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* JDWP initialization.
*/
#include "jdwp/JdwpPriv.h"
#include "Dalvik.h"
#include "Atomic.h"
#include <stdlib.h>
#include <unistd.h>
#include <sys/time.h>
#include <time.h>
#include <errno.h>
static void* jdwpThreadStart(void* arg);
/*
* JdwpNetStateBase class implementation
*/
JdwpNetStateBase::JdwpNetStateBase()
{
clientSock = -1;
dvmDbgInitMutex(&socketLock);
}
/*
* Write a packet. Grabs a mutex to assure atomicity.
*/
ssize_t JdwpNetStateBase::writePacket(ExpandBuf* pReply)
{
dvmDbgLockMutex(&socketLock);
ssize_t cc = write(clientSock, expandBufGetBuffer(pReply),
expandBufGetLength(pReply));
dvmDbgUnlockMutex(&socketLock);
return cc;
}
/*
* Write a buffered packet. Grabs a mutex to assure atomicity.
*/
ssize_t JdwpNetStateBase::writeBufferedPacket(const struct iovec* iov,
int iovcnt)
{
dvmDbgLockMutex(&socketLock);
ssize_t actual = writev(clientSock, iov, iovcnt);
dvmDbgUnlockMutex(&socketLock);
return actual;
}
/*
* Initialize JDWP.
*
* Does not return until JDWP thread is running, but may return before
* the thread is accepting network connections.
*/
JdwpState* dvmJdwpStartup(const JdwpStartupParams* pParams)
{
JdwpState* state = NULL;
/* comment this out when debugging JDWP itself */
android_setMinPriority(LOG_TAG, ANDROID_LOG_DEBUG);
state = (JdwpState*) calloc(1, sizeof(JdwpState));
state->params = *pParams;
state->requestSerial = 0x10000000;
state->eventSerial = 0x20000000;
dvmDbgInitMutex(&state->threadStartLock);
dvmDbgInitMutex(&state->attachLock);
dvmDbgInitMutex(&state->serialLock);
dvmDbgInitMutex(&state->eventLock);
state->eventThreadId = 0;
dvmDbgInitMutex(&state->eventThreadLock);
dvmDbgInitCond(&state->threadStartCond);
dvmDbgInitCond(&state->attachCond);
dvmDbgInitCond(&state->eventThreadCond);
switch (pParams->transport) {
case kJdwpTransportSocket:
// ALOGD("prepping for JDWP over TCP");
state->transport = dvmJdwpSocketTransport();
break;
case kJdwpTransportAndroidAdb:
// ALOGD("prepping for JDWP over ADB");
state->transport = dvmJdwpAndroidAdbTransport();
/* TODO */
break;
default:
ALOGE("Unknown transport %d", pParams->transport);
assert(false);
goto fail;
}
if (!dvmJdwpNetStartup(state, pParams))
goto fail;
/*
* Grab a mutex or two before starting the thread. This ensures they
* won't signal the cond var before we're waiting.
*/
dvmDbgLockMutex(&state->threadStartLock);
if (pParams->suspend)
dvmDbgLockMutex(&state->attachLock);
/*
* We have bound to a port, or are trying to connect outbound to a
* debugger. Create the JDWP thread and let it continue the mission.
*/
if (!dvmCreateInternalThread(&state->debugThreadHandle, "JDWP",
jdwpThreadStart, state))
{
/* state is getting tossed, but unlock these anyway for cleanliness */
dvmDbgUnlockMutex(&state->threadStartLock);
if (pParams->suspend)
dvmDbgUnlockMutex(&state->attachLock);
goto fail;
}
/*
* Wait until the thread finishes basic initialization.
* TODO: cond vars should be waited upon in a loop
*/
dvmDbgCondWait(&state->threadStartCond, &state->threadStartLock);
dvmDbgUnlockMutex(&state->threadStartLock);
/*
* For suspend=y, wait for the debugger to connect to us or for us to
* connect to the debugger.
*
* The JDWP thread will signal us when it connects successfully or
* times out (for timeout=xxx), so we have to check to see what happened
* when we wake up.
*/
if (pParams->suspend) {
dvmChangeStatus(NULL, THREAD_VMWAIT);
dvmDbgCondWait(&state->attachCond, &state->attachLock);
dvmDbgUnlockMutex(&state->attachLock);
dvmChangeStatus(NULL, THREAD_RUNNING);
if (!dvmJdwpIsActive(state)) {
ALOGE("JDWP connection failed");
goto fail;
}
ALOGI("JDWP connected");
/*
* Ordinarily we would pause briefly to allow the debugger to set
* breakpoints and so on, but for "suspend=y" the VM init code will
* pause the VM when it sends the VM_START message.
*/
}
return state;
fail:
dvmJdwpShutdown(state); // frees state
return NULL;
}
/*
* Reset all session-related state. There should not be an active connection
* to the client at this point. The rest of the VM still thinks there is
* a debugger attached.
*
* This includes freeing up the debugger event list.
*/
void dvmJdwpResetState(JdwpState* state)
{
/* could reset the serial numbers, but no need to */
dvmJdwpUnregisterAll(state);
assert(state->eventList == NULL);
/*
* Should not have one of these in progress. If the debugger went away
* mid-request, though, we could see this.
*/
if (state->eventThreadId != 0) {
ALOGW("WARNING: resetting state while event in progress");
assert(false);
}
}
/*
* Tell the JDWP thread to shut down. Frees "state".
*/
void dvmJdwpShutdown(JdwpState* state)
{
void* threadReturn;
if (state == NULL)
return;
if (dvmJdwpIsTransportDefined(state)) {
if (dvmJdwpIsConnected(state))
dvmJdwpPostVMDeath(state);
/*
* Close down the network to inspire the thread to halt.
*/
if (gDvm.verboseShutdown)
ALOGD("JDWP shutting down net...");
dvmJdwpNetShutdown(state);
if (state->debugThreadStarted) {
state->run = false;
if (pthread_join(state->debugThreadHandle, &threadReturn) != 0) {
ALOGW("JDWP thread join failed");
}
}
if (gDvm.verboseShutdown)
ALOGD("JDWP freeing netstate...");
dvmJdwpNetFree(state);
state->netState = NULL;
}
assert(state->netState == NULL);
dvmJdwpResetState(state);
free(state);
}
/*
* Are we talking to a debugger?
*/
bool dvmJdwpIsActive(JdwpState* state)
{
return dvmJdwpIsConnected(state);
}
/*
* Entry point for JDWP thread. The thread was created through the VM
* mechanisms, so there is a java/lang/Thread associated with us.
*/
static void* jdwpThreadStart(void* arg)
{
JdwpState* state = (JdwpState*) arg;
ALOGV("JDWP: thread running");
/*
* Finish initializing "state", then notify the creating thread that
* we're running.
*/
state->debugThreadHandle = dvmThreadSelf()->handle;
state->run = true;
android_atomic_release_store(true, &state->debugThreadStarted);
dvmDbgLockMutex(&state->threadStartLock);
dvmDbgCondBroadcast(&state->threadStartCond);
dvmDbgUnlockMutex(&state->threadStartLock);
/* set the thread state to VMWAIT so GCs don't wait for us */
dvmDbgThreadWaiting();
/*
* Loop forever if we're in server mode, processing connections. In
* non-server mode, we bail out of the thread when the debugger drops
* us.
*
* We broadcast a notification when a debugger attaches, after we
* successfully process the handshake.
*/
while (state->run) {
bool first;
if (state->params.server) {
/*
* Block forever, waiting for a connection. To support the
* "timeout=xxx" option we'll need to tweak this.
*/
if (!dvmJdwpAcceptConnection(state))
break;
} else {
/*
* If we're not acting as a server, we need to connect out to the
* debugger. To support the "timeout=xxx" option we need to
* have a timeout if the handshake reply isn't received in a
* reasonable amount of time.
*/
if (!dvmJdwpEstablishConnection(state)) {
/* wake anybody who was waiting for us to succeed */
dvmDbgLockMutex(&state->attachLock);
dvmDbgCondBroadcast(&state->attachCond);
dvmDbgUnlockMutex(&state->attachLock);
break;
}
}
/* prep debug code to handle the new connection */
dvmDbgConnected();
/* process requests until the debugger drops */
first = true;
while (true) {
// sanity check -- shouldn't happen?
if (dvmThreadSelf()->status != THREAD_VMWAIT) {
ALOGE("JDWP thread no longer in VMWAIT (now %d); resetting",
dvmThreadSelf()->status);
dvmDbgThreadWaiting();
}
if (!dvmJdwpProcessIncoming(state)) /* blocking read */
break;
if (first && !dvmJdwpAwaitingHandshake(state)) {
/* handshake worked, tell the interpreter that we're active */
first = false;
/* set thread ID; requires object registry to be active */
state->debugThreadId = dvmDbgGetThreadSelfId();
/* wake anybody who's waiting for us */
dvmDbgLockMutex(&state->attachLock);
dvmDbgCondBroadcast(&state->attachCond);
dvmDbgUnlockMutex(&state->attachLock);
}
}
dvmJdwpCloseConnection(state);
if (state->ddmActive) {
state->ddmActive = false;
/* broadcast the disconnect; must be in RUNNING state */
dvmDbgThreadRunning();
dvmDbgDdmDisconnected();
dvmDbgThreadWaiting();
}
/* release session state, e.g. remove breakpoint instructions */
dvmJdwpResetState(state);
/* tell the interpreter that the debugger is no longer around */
dvmDbgDisconnected();
/* if we had threads suspended, resume them now */
dvmUndoDebuggerSuspensions();
/* if we connected out, this was a one-shot deal */
if (!state->params.server)
state->run = false;
}
/* back to running, for thread shutdown */
dvmDbgThreadRunning();
ALOGV("JDWP: thread exiting");
return NULL;
}
/*
* Return the thread handle, or (pthread_t)0 if the debugger isn't running.
*/
pthread_t dvmJdwpGetDebugThread(JdwpState* state)
{
if (state == NULL)
return 0;
return state->debugThreadHandle;
}
/*
* Support routines for waitForDebugger().
*
* We can't have a trivial "waitForDebugger" function that returns the
* instant the debugger connects, because we run the risk of executing code
* before the debugger has had a chance to configure breakpoints or issue
* suspend calls. It would be nice to just sit in the suspended state, but
* most debuggers don't expect any threads to be suspended when they attach.
*
* There's no JDWP event we can post to tell the debugger, "we've stopped,
* and we like it that way". We could send a fake breakpoint, which should
* cause the debugger to immediately send a resume, but the debugger might
* send the resume immediately or might throw an exception of its own upon
* receiving a breakpoint event that it didn't ask for.
*
* What we really want is a "wait until the debugger is done configuring
* stuff" event. We can approximate this with a "wait until the debugger
* has been idle for a brief period".
*/
/*
* Get a notion of the current time, in milliseconds.
*/
s8 dvmJdwpGetNowMsec()
{
#ifdef HAVE_POSIX_CLOCKS
struct timespec now;
clock_gettime(CLOCK_MONOTONIC, &now);
return now.tv_sec * 1000LL + now.tv_nsec / 1000000LL;
#else
struct timeval now;
gettimeofday(&now, NULL);
return now.tv_sec * 1000LL + now.tv_usec / 1000LL;
#endif
}
/*
* Return the time, in milliseconds, since the last debugger activity.
*
* Returns -1 if no debugger is attached, or 0 if we're in the middle of
* processing a debugger request.
*/
s8 dvmJdwpLastDebuggerActivity(JdwpState* state)
{
if (!gDvm.debuggerActive) {
ALOGD("dvmJdwpLastDebuggerActivity: no active debugger");
return -1;
}
s8 last = dvmQuasiAtomicRead64(&state->lastActivityWhen);
/* initializing or in the middle of something? */
if (last == 0) {
ALOGV("+++ last=busy");
return 0;
}
/* now get the current time */
s8 now = dvmJdwpGetNowMsec();
assert(now >= last);
ALOGV("+++ debugger interval=%lld", now - last);
return now - last;
}