/*
* Copyright (c) 2008, Google Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _MSM7200_USB_H_
#define _MSM7200_USB_H_
#define MSM_USB_BASE 0xA0800000
#define USB_ID (MSM_USB_BASE + 0x0000)
#define USB_HWGENERAL (MSM_USB_BASE + 0x0004)
#define USB_HWHOST (MSM_USB_BASE + 0x0008)
#define USB_HWDEVICE (MSM_USB_BASE + 0x000C)
#define USB_HWTXBUF (MSM_USB_BASE + 0x0010)
#define USB_HWRXBUF (MSM_USB_BASE + 0x0014)
#define USB_SBUSCFG (MSM_USB_BASE + 0x0090)
#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */
#define USB_HCIVERSION (MSM_USB_BASE + 0x0102) /* 16 bit */
#define USB_HCSPARAMS (MSM_USB_BASE + 0x0104)
#define USB_HCCPARAMS (MSM_USB_BASE + 0x0108)
#define USB_DCIVERSION (MSM_USB_BASE + 0x0120) /* 16 bit */
#define USB_USBCMD (MSM_USB_BASE + 0x0140)
#define USB_USBSTS (MSM_USB_BASE + 0x0144)
#define USB_USBINTR (MSM_USB_BASE + 0x0148)
#define USB_FRINDEX (MSM_USB_BASE + 0x014C)
#define USB_DEVICEADDR (MSM_USB_BASE + 0x0154)
#define USB_ENDPOINTLISTADDR (MSM_USB_BASE + 0x0158)
#define USB_BURSTSIZE (MSM_USB_BASE + 0x0160)
#define USB_TXFILLTUNING (MSM_USB_BASE + 0x0164)
#define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170)
#define USB_ENDPTNAK (MSM_USB_BASE + 0x0178)
#define USB_ENDPTNAKEN (MSM_USB_BASE + 0x017C)
#define USB_PORTSC (MSM_USB_BASE + 0x0184)
#define USB_OTGSC (MSM_USB_BASE + 0x01A4)
#define USB_USBMODE (MSM_USB_BASE + 0x01A8)
#define USB_ENDPTSETUPSTAT (MSM_USB_BASE + 0x01AC)
#define USB_ENDPTPRIME (MSM_USB_BASE + 0x01B0)
#define USB_ENDPTFLUSH (MSM_USB_BASE + 0x01B4)
#define USB_ENDPTSTAT (MSM_USB_BASE + 0x01B8)
#define USB_ENDPTCOMPLETE (MSM_USB_BASE + 0x01BC)
#define USB_ENDPTCTRL(n) (MSM_USB_BASE + 0x01C0 + (4 * (n)))
#define USBCMD_RESET 2
#define USBCMD_ATTACH 1
#define USBMODE_DEVICE 2
#define USBMODE_HOST 3
struct ept_queue_head
{
unsigned config;
unsigned current; /* read-only */
unsigned next;
unsigned info;
unsigned page0;
unsigned page1;
unsigned page2;
unsigned page3;
unsigned page4;
unsigned reserved_0;
unsigned char setup_data[8];
unsigned reserved_1;
unsigned reserved_2;
unsigned reserved_3;
unsigned reserved_4;
};
#define CONFIG_MAX_PKT(n) ((n) << 16)
#define CONFIG_ZLT (1 << 29) /* stop on zero-len xfer */
#define CONFIG_IOS (1 << 15) /* IRQ on setup */
struct ept_queue_item
{
unsigned next;
unsigned info;
unsigned page0;
unsigned page1;
unsigned page2;
unsigned page3;
unsigned page4;
unsigned reserved;
};
#define TERMINATE 1
#define INFO_BYTES(n) ((n) << 16)
#define INFO_IOC (1 << 15)
#define INFO_ACTIVE (1 << 7)
#define INFO_HALTED (1 << 6)
#define INFO_BUFFER_ERROR (1 << 5)
#define INFO_TX_ERROR (1 << 3)
#define STS_NAKI (1 << 16) /* */
#define STS_SLI (1 << 8) /* R/WC - suspend state entered */
#define STS_SRI (1 << 7) /* R/WC - SOF recv'd */
#define STS_URI (1 << 6) /* R/WC - RESET recv'd - write to clear */
#define STS_FRI (1 << 3) /* R/WC - Frame List Rollover */
#define STS_PCI (1 << 2) /* R/WC - Port Change Detect */
#define STS_UEI (1 << 1) /* R/WC - USB Error */
#define STS_UI (1 << 0) /* R/WC - USB Transaction Complete */
/* bits used in all the endpoint status registers */
#define EPT_TX(n) (1 << ((n) + 16))
#define EPT_RX(n) (1 << (n))
#define CTRL_TXE (1 << 23)
#define CTRL_TXR (1 << 22)
#define CTRL_TXI (1 << 21)
#define CTRL_TXD (1 << 17)
#define CTRL_TXS (1 << 16)
#define CTRL_RXE (1 << 7)
#define CTRL_RXR (1 << 6)
#define CTRL_RXI (1 << 5)
#define CTRL_RXD (1 << 1)
#define CTRL_RXS (1 << 0)
#define CTRL_TXT_CTRL (0 << 18)
#define CTRL_TXT_ISOCH (1 << 18)
#define CTRL_TXT_BULK (2 << 18)
#define CTRL_TXT_INT (3 << 18)
#define CTRL_RXT_CTRL (0 << 2)
#define CTRL_RXT_ISOCH (1 << 2)
#define CTRL_RXT_BULK (2 << 2)
#define CTRL_RXT_INT (3 << 2)
#define ULPI_WAKEUP (1 << 31)
#define ULPI_RUN (1 << 30)
#define ULPI_WRITE (1 << 29)
#define ULPI_READ (0 << 29)
#define ULPI_STATE_NORMAL (1 << 27)
#define ULPI_ADDR(n) (((n) & 255) << 16)
#define ULPI_DATA(n) ((n) & 255)
#define ULPI_DATA_READ(n) (((n) >> 8) & 255)
#endif