strings.xml - Android社区 - https://www.androidos.net.cn/

<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2007 The Android Open Source Project

Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
 distributed under the License is distributed on an "AS IS" BASIS,
 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and
 limitations under the License.
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
 
 <string name="yes">"Yes"</string>

<string name="no">"No"</string>

<skip />
 
 <string name="device_info_default">Unknown</string>

<skip />
 
 <string name="header_category_wireless_networks">WIRELESS & NETWORKS</string>
 
 <string name="header_category_device">DEVICE</string>
 
 <string name="header_category_personal">PERSONAL</string>
 
 <string name="header_category_system">SYSTEM</string>

<string name="turn_on_radio">Turn on radio</string>
 
 <string name="turn_off_radio">Turn off radio</string>

<string name="sms_over_ims_on">Turn on SMS over IMS</string>
 
 <string name="sms_over_ims_off">Turn off SMS over IMS</string>

<string name="ims_reg_required_on">Turn on IMS registration required</string>
 
 <string name="ims_reg_required_off">Turn off IMS registration required</string>

<string name="lte_ram_dump_on">Turn on lte ram dump</string>
 
 <string name="lte_ram_dump_off">Turn off lte ram dump</string>

<string name="radioInfo_menu_viewADN">View SIM address book</string>
 
 <string name="radioInfo_menu_viewFDN">View Fixed Dialing Numbers</string>
 
 <string name="radioInfo_menu_viewSDN">View Service Dialing Numbers</string>
 
 <string name="radioInfo_menu_getPDP">Get PDP list</string>

<string name="radioInfo_service_in">In service</string>
 
 <string name="radioInfo_service_out">Out of service</string>
 
 <string name="radioInfo_service_emergency">Emergency calls only</string>
 
 <string name="radioInfo_service_off">Radio off</string>

<string name="radioInfo_roaming_in">Roaming</string>
 
 <string name="radioInfo_roaming_not">Not roaming</string>

<string name="radioInfo_phone_idle">Idle</string>
 
 <string name="radioInfo_phone_ringing">Ringing</string>
 
 <string name="radioInfo_phone_offhook">Call in progress</string>

<string name="radioInfo_data_disconnected">Disconnected</string>
 
 <string name="radioInfo_data_connecting">Connecting</string>
 
 <string name="radioInfo_data_connected">Connected</string>
 
 <string name="radioInfo_data_suspended">Suspended</string>

<string name="radioInfo_unknown">unknown</string>
 
 <string name="radioInfo_display_packets">pkts</string>
 
 <string name="radioInfo_display_bytes">bytes</string>
 
 <string name="radioInfo_display_dbm">dBm</string>
 
 <string name="radioInfo_display_asu">asu</string>
 
 <string name="radioInfo_lac">LAC</string>
 
 <string name="radioInfo_cid">CID</string>

<string name="sdcard_unmount" product="nosdcard">Unmount USB storage</string>
 
 <string name="sdcard_unmount" product="default">Unmount SD card</string>

<string name="sdcard_format" product="nosdcard">Erase USB storage</string>
 
 <string name="sdcard_format" product="default">Erase SD card</string>

<string name="small_font">Small</string>
 
 <string name="medium_font">Medium</string>
 
 <string name="large_font">Large</string>

<string name="font_size_preview_text">Servez à ce monsieur une bière et des kiwis.</string>
 
 <string name="font_size_save">OK</string>

<string name="sdcard_setting" product="nosdcard">USB storage</string>
 
 <string name="sdcard_setting" product="default">SD card</string>

<string name="battery_info_status_label">Battery status:</string>
 
 <string name="battery_info_power_label">Power plug:</string>
 
 <string name="battery_info_scale_label">Battery scale:</string>
 
 <string name="battery_info_level_label">Battery level:</string>
 
 <string name="battery_info_health_label">Battery health:</string>
 
 <string name="battery_info_technology_label">Battery technology:</string>
 
 <string name="battery_info_voltage_label">Battery voltage:</string>
 
 <string name="battery_info_voltage_units">mV</string>
 
 <string name="battery_info_temperature_label">Battery temperature:</string>
 
 <string name="battery_info_temperature_units">\u00B0 C</string>
 
 <string name="battery_info_uptime">Time since boot:</string>
 
 <string name="battery_info_awake_battery">Awake time on battery:</string>
 
 <string name="battery_info_awake_plugged">Awake time when charging:</string>
 
 <string name="battery_info_screen_on">Screen ON time:</string>

<string name="battery_info_status_unknown">Unknown</string>
 
 <string name="battery_info_status_charging">Charging</string>
 
 <string name="battery_info_status_charging_ac">(AC)</string>
 
 <string name="battery_info_status_charging_usb">(USB)</string>
 
 <string name="battery_info_status_discharging">Discharging</string>
 
 <string name="battery_info_status_not_charging">Not charging</string>
 
 <string name="battery_info_status_full">Full</string>

<string name="battery_info_power_unplugged">Unplugged</string>
 <string name="battery_info_power_ac">AC</string>
 <string name="battery_info_power_usb">USB</string>
 <string name="battery_info_power_ac_usb">AC+USB</string>
 <string name="battery_info_power_unknown">Unknown</string>

<string name="battery_info_health_unknown">Unknown</string>
 
 <string name="battery_info_health_good">Good</string>
 
 <string name="battery_info_health_overheat">Overheat</string>
 
 <string name="battery_info_health_dead">Dead</string>
 
 <string name="battery_info_health_over_voltage">Over voltage</string>
 
 <string name="battery_info_health_unspecified_failure">Unknown error</string>
 
 <string name="battery_info_health_cold">Cold</string>

<string name="bluetooth">Bluetooth</string>
 
 <string name="bluetooth_visibility">Discoverable</string>
 
 <string name="bluetooth_is_discoverable">Visible to all nearby Bluetooth devices (<xliff:g id="discoverable_time_period">%1$s</xliff:g>)</string>
 
 <string name="bluetooth_is_discoverable_always">Visible to all nearby Bluetooth devices</string>
 
 <string name="bluetooth_not_visible_to_other_devices">Not visible to other Bluetooth devices</string>
 
 <string name="bluetooth_only_visible_to_paired_devices">Only visible to paired devices</string>
 
 <string name="bluetooth_not_discoverable">Make device discoverable</string>
 
 <string name="bluetooth_visibility_timeout">Visibility timeout</string>
 
 <string name="bluetooth_visibility_timeout_summary">Set how long device will be discoverable</string>
 
 <string name="bluetooth_lock_voice_dialing">Lock voice dialing</string>
 
 <string name="bluetooth_lock_voice_dialing_summary">
 Prevent use of the bluetooth dialer when the screen is locked
 </string>
 
 <string name="bluetooth_devices">Bluetooth devices</string>
 
 <string name="bluetooth_device_name">Device name</string>
 
 <string name="bluetooth_name_not_set">No name set, using account name</string>
 
 <string name="bluetooth_scan_for_devices">Scan for devices</string>
 
 <string name="bluetooth_rename_device" product="tablet">Rename tablet</string>
 
 <string name="bluetooth_rename_device" product="default">Rename phone</string>
 
 <string name="bluetooth_rename_button">Rename</string>
 
 <string name="bluetooth_disconnect_title">Disconnect?</string>
 
 <string name="bluetooth_disconnect_all_profiles">This will end your connection with: <xliff:g id="device_name">%1$s</xliff:g></string>

<string name="bluetooth_disable_profile_title">Disable profile?</string>
 
 <string name="bluetooth_disable_profile_message">This will disable: <xliff:g id="profile_name">%1$s</xliff:g> From: <xliff:g id="device_name">%2$s</xliff:g></string>

<string name="bluetooth_connected">Connected</string>
 
 <string name="bluetooth_connected_no_headset">Connected (no phone)</string>
 
 <string name="bluetooth_connected_no_a2dp">Connected (no media)</string>
 
 <string name="bluetooth_connected_no_headset_no_a2dp">Connected (no phone or media)</string>
 
 <string name="bluetooth_disconnected">Disconnected</string>
 
 <string name="bluetooth_disconnecting">Disconnecting\u2026</string>
 
 <string name="bluetooth_connecting">Connecting\u2026</string>
 
 <string name="bluetooth_unknown" />
 
 <string name="bluetooth_pairing">Pairing\u2026</string>
 
 <string name="bluetooth_device">Unnamed Bluetooth device</string>
 
 <string name="progress_scanning">Searching</string>
 
 <string name="progress_tap_to_pair">Touch to pair</string>
 
 <string name="bluetooth_no_devices_found">No nearby Bluetooth devices were found.</string>
 
 <string name="bluetooth_notif_ticker">Bluetooth pairing request</string>
 
 <string name="bluetooth_notif_title">Pairing request</string>
 
 <string name="bluetooth_notif_message">Touch to pair with <xliff:g id="device_name">%1$s</xliff:g></string>
 
 <string name="bluetooth_show_received_files">Show received files</string>

<string name="device_picker">Bluetooth device picker</string>

<string name="bluetooth_permission_request">"Bluetooth permission request"</string>

<string name="bluetooth_ask_enablement">"An app wants to turn on Bluetooth. Allow?"</string>

<string name="bluetooth_ask_discovery" product="tablet">"An app on your tablet wants to make your tablet discoverable by other Bluetooth devices for <xliff:g id="timeout">%1$d</xliff:g> seconds. Allow?"</string>
 
 <string name="bluetooth_ask_discovery" product="default">"An app on your phone wants to make your phone discoverable by other Bluetooth devices for <xliff:g id="timeout">%1$d</xliff:g> seconds. Allow?"</string>

<string name="bluetooth_ask_lasting_discovery" product="tablet">"An app on your tablet wants to make your tablet \u201calways discoverable\u201d by other Bluetooth devices. Allow?"</string>
 <string name="bluetooth_ask_lasting_discovery" product="default">"An app on your phone wants to make your phone \u201calways discoverable\u201d by other Bluetooth devices. Allow?"</string>

<string name="bluetooth_ask_enablement_and_discovery" product="tablet">"An app on your tablet wants to turn on Bluetooth and make your tablet discoverable by other devices for <xliff:g id="timeout">%1$d</xliff:g> seconds. Allow?"</string>
 
 <string name="bluetooth_ask_enablement_and_discovery" product="default">"An app on your phone wants to turn on Bluetooth and make your phone discoverable by other devices for <xliff:g id="timeout">%1$d</xliff:g> seconds. Allow?"</string>

<string name="bluetooth_ask_enablement_and_lasting_discovery" product="tablet">"An app on your tablet wants to turn on Bluetooth and make your tablet discoverable by other devices. Allow?"</string>
 <string name="bluetooth_ask_enablement_and_lasting_discovery" product="default">"An app on your phone wants to turn on Bluetooth and make your phone discoverable by other devices. Allow?"</string>

<string name="bluetooth_turning_on">"Turning Bluetooth on\u2026"</string>

<string name="bluetooth_turning_off">"Turning Bluetooth off\u2026"</string>

<string name="bluetooth_auto_connect">Auto-connect</string>

<string name="bluetooth_connection_permission_request">"Bluetooth connection request"</string>

<string name="bluetooth_connection_notif_message">"Touch to connect to \u0022<xliff:g id="device_name">%1$s</xliff:g>\u0022."</string>

<string name="bluetooth_connection_dialog_text">"Do you want to connect to \u0022<xliff:g id="device_name">%1$s</xliff:g>\u0022?"</string>

<string name="bluetooth_phonebook_request">"Phone book request"</string>

<string name="bluetooth_pb_acceptance_dialog_text">%1$s would like to access your contacts and call history. Give access to %2$s?</string>

<string name="bluetooth_pb_remember_choice">Don\'t ask again</string>

<string name="date_and_time">Date & time settings</string>
 
 <string name="date_time_12_hour_sample">1:00 pm</string>
 
 <string name="date_time_24_hour_sample">13:00</string>
 
 <string name="choose_timezone">Choose time zone</string>
 
 <string name="default_date_format"><xliff:g id="default_date_format">MM/dd/yyyy</xliff:g></string>

<string name="normal_date_format">Regional (<xliff:g id="date" example="12-31-2009">%s</xliff:g>)</string>

<string name="display_preview_label">Preview:</string>
 
 <string name="display_font_size_label">Font size:</string>

<string name="intent_sender_data_label"><xliff:g id="data">Data:</xliff:g></string>
 
 <string name="intent_sender_sendbroadcast_text">Send <xliff:g id="broadcast">broadcast</xliff:g></string>
 
 <string name="intent_sender_action_label"><xliff:g id="action">Action</xliff:g>:</string>
 
 <string name="intent_sender_startactivity_text">Start <xliff:g id="activity">activity</xliff:g></string>
 
 <string name="intent_sender_resource_label"><xliff:g id="resource">Resource</xliff:g>: </string>
 
 <string name="intent_sender_account_label">Account: </string>

<string name="proxy_settings_title">Proxy settings</string>
 
 <string name="proxy_clear_text">Clear</string>
 
 <string name="proxy_port_label">Proxy port</string>
 
 <string name="proxy_port_hint" translatable="false">8080</string>
 
 <string name="proxy_exclusionlist_label">Bypass proxy for</string>
 
 <string name="proxy_exclusionlist_hint">example.com,mycomp.test.com,localhost</string>
 
 <string name="proxy_defaultView_text">Restore defaults</string>
 
 <string name="proxy_action_text">Done</string>
 
 <string name="proxy_hostname_label">Proxy hostname</string>
 
 <string name="proxy_hostname_hint">proxy.example.com</string>
 
 <string name="proxy_error">Attention</string>
 
 <string name="proxy_error_dismiss">OK</string>
 
 <string name="proxy_error_invalid_host">The hostname you typed isn\'t valid.</string>
 
 <string name="proxy_error_invalid_exclusion_list">The exclusion list you typed isn\'t properly formatted. Type a comma-separated list of excluded domains.</string>
 
 <string name="proxy_error_empty_port">You must complete the port field.</string>
 
 <string name="proxy_error_empty_host_set_port">The port field must be empty if the host field is empty.</string>
 
 <string name="proxy_error_invalid_port">The port you typed isn\'t valid.</string>
 
 <string name="proxy_warning_limited_support">The HTTP proxy is used by the browser but may not be used by the other apps.</string>

<string name="radio_info_signal_location_label">Location:</string>
 
 <string name="radio_info_neighboring_location_label">Neighboring CID:</string>
 
 <string name="radio_info_data_attempts_label">Data attempts:</string>

<string name="radio_info_gprs_service_label">GPRS service:</string>
 
 <string name="radio_info_roaming_label">Roaming:</string>
 
 <string name="radio_info_imei_label">IMEI:</string>
 
 <string name="radio_info_call_redirect_label">Call redirect:</string>
 
 <string name="radio_info_ppp_resets_label">Number of PPP reset since boot:</string>
 
 <string name="radio_info_gsm_disconnects_label">GSM disconnects:</string>
 
 <string name="radio_info_current_network_label">Current network:</string>
 
 <string name="radio_info_data_successes_label">Data successes:</string>
 
 <string name="radio_info_ppp_received_label">PPP received:</string>
 
 <string name="radio_info_gsm_service_label">GSM service:</string>
 
 <string name="radio_info_signal_strength_label">Signal strength:</string>
 
 <string name="radio_info_call_status_label">Call status:</string>
 
 <string name="radio_info_ppp_sent_label">PPP sent:</string>
 
 <string name="radio_info_radio_resets_label">Radio resets:</string>
 
 <string name="radio_info_message_waiting_label">Message waiting:</string>
 
 <string name="radio_info_phone_number_label">Phone number:</string>
 
 <string name="radio_info_band_mode_label">Select radio band</string>
 
 <string name="radio_info_network_type_label">Network type:</string>
 
 <string name="radio_info_set_perferred_label">Set preferred network type:</string>
 
 <string name="radio_info_ping_ipaddr">Ping IpAddr:</string>
 
 <string name="radio_info_ping_hostname">Ping Hostname(www.google.com):</string>
 
 <string name="radio_info_http_client_test">HTTP Client test:</string>
 
 <string name="ping_test_label">Run ping test</string>
 
 <string name="radio_info_smsc_label">SMSC:</string>
 
 <string name="radio_info_smsc_update_label">Update</string>
 
 <string name="radio_info_smsc_refresh_label">Refresh</string>
 
 <string name="radio_info_toggle_dns_check_label">Toggle DNS check</string>
 
 <string name="oem_radio_info_label">OEM-specific Info/Settings</string>

<string name="band_mode_title">Set GSM/UMTS band</string>
 
 <string name="band_mode_loading">Loading band list\u2026</string>
 
 <string name="band_mode_set">Set</string>
 
 <string name="band_mode_failed">Unsuccessful</string>
 
 <string name="band_mode_succeeded">Successful</string>

<string name="sdcard_changes_instructions">Changes take effect when USB cable is reconnected</string>
 
 <string name="sdcard_settings_screen_mass_storage_text">Enable USB mass storage</string>
 
 <string name="sdcard_settings_total_bytes_label">Total bytes:</string>
 
 <string name="sdcard_settings_not_present_status" product="nosdcard">USB storage not mounted</string>
 
 <string name="sdcard_settings_not_present_status" product="default">No SD card</string>
 
 <string name="sdcard_settings_available_bytes_label">Available bytes:</string>
 
 <string name="sdcard_settings_mass_storage_status" product="nosdcard">USB storage is being used as a mass storage device</string>
 
 <string name="sdcard_settings_mass_storage_status" product="default">SD card is being used as a mass storage device</string>
 
 <string name="sdcard_settings_unmounted_status" product="nosdcard">It\'s now safe to remove the USB storage</string>
 
 <string name="sdcard_settings_unmounted_status" product="default">It\'s now safe to remove the SD card</string>
 
 <string name="sdcard_settings_bad_removal_status" product="nosdcard">USB storage was removed while still in use!</string>
 
 <string name="sdcard_settings_bad_removal_status" product="default">SD card was removed while still in use!</string>
 
 <string name="sdcard_settings_used_bytes_label">Used bytes:</string>
 
 <string name="sdcard_settings_scanning_status" product="nosdcard">Scanning USB storage for media\u2026</string>
 
 <string name="sdcard_settings_scanning_status" product="default">Scanning SD card for media\u2026</string>
 
 <string name="sdcard_settings_read_only_status" product="nosdcard">USB storage mounted read-only</string>
 
 <string name="sdcard_settings_read_only_status" product="default">SD card mounted read-only</string>
 
 <string name="skip_label">Skip</string>
 
 <string name="next_label">Next</string>

<string name="language_picker_title">Language</string>

<string name="activity_picker_label">Choose activity</string>
 
 <string name="debug_intent_sender_label">Debug intent sender</string>
 
 <string name="device_info_label">Device info</string>
 
 <string name="battery_info_label">Battery info</string>
 
 <string name="display_label">Screen</string>
 
 <string name="phone_info_label" product="tablet">Tablet info</string>
 
 <string name="phone_info_label" product="default">Phone info</string>
 
 <string name="sd_card_settings_label" product="nosdcard">USB storage</string>
 
 <string name="sd_card_settings_label" product="default">SD card</string>
 
 <string name="proxy_settings_label">Proxy settings</string>

<string name="cancel">Cancel</string>

<string name="settings_label">Settings</string>
 
 <string name="settings_label_launcher">Settings</string>
 
 <string name="settings_shortcut">Settings shortcut</string>
 
 <string name="airplane_mode">Airplane mode</string>
 
 <string name="radio_controls_title">More\u2026</string>
 
 <string name="wireless_networks_settings_title">Wireless & networks</string>
 
 <string name="radio_controls_summary">Manage WiFi, Bluetooth, airplane mode, mobile networks, & VPNs</string>

<string name="roaming">Data roaming</string>
 
 <string name="roaming_enable">Connect to data services when roaming</string>
 
 <string name="roaming_disable">Connect to data services when roaming</string>
 
 <string name="roaming_reenable_message">You have lost data connectivity because you left your home network with data roaming turned off.</string>
 
 <string name="roaming_turn_it_on_button">Turn it on</string>
 
 <string name="roaming_warning">Allow data roaming? You may incur significant roaming charges!</string>
 
 <string name="roaming_reenable_title">Attention</string>
 
 <string name="networks">Operator selection</string>
 
 <string name="sum_carrier_select">Choose a network operator</string>

<skip />
 
 <string name="date_and_time_settings_title">Date & time</string>
 
 <string name="date_and_time_settings_title_setup_wizard">Set date and time</string>
 
 <string name="date_and_time_settings_summary">Set date, time, time zone, & formats</string>
 
 <string name="date_time_auto">Automatic date & time</string>
 
 <string name="date_time_auto_summaryOn">Use network-provided time</string>
 
 <string name="date_time_auto_summaryOff">Use network-provided time</string>
 
 <string name="zone_auto">Automatic time zone</string>
 
 <string name="zone_auto_summaryOn">Use network-provided time zone</string>
 
 <string name="zone_auto_summaryOff">Use network-provided time zone</string>
 
 <string name="date_time_24hour">Use 24-hour format</string>
 
 <string name="date_time_set_time">Set time</string>
 
 <string name="date_time_set_timezone">Select time zone</string>
 
 <string name="date_time_set_date">Set date</string>
 
 <string name="date_time_date_format">Select date format</string>
 
 <string name="zone_list_menu_sort_alphabetically">Sort alphabetically</string>
 
 <string name="zone_list_menu_sort_by_timezone">Sort by time zone</string>
 
 <string name="date_picker_title">Date</string>
 
 <string name="time_picker_title">Time</string>

<skip />

<string name="biometric_weak_improve_matching_title">Improve face matching</string>

<string name="lock_after_timeout">Automatically lock</string>
 
 <string name="lock_after_timeout_summary"><xliff:g id="timeout_string">%1$s</xliff:g> after sleep</string>
 
 <string name="show_owner_info_on_lockscreen_label">Show owner info on lock screen</string>
 
 <string name="owner_info_settings_title">Owner info</string>
 
 <string name="owner_info_settings_summary"></string>
 
 <string name="owner_info_settings_edit_text_hint">Type text to display on the lock screen</string>
 
 <string name="location_settings_title">Location services</string>
 
 <string name="security_settings_title">Security</string>
 
 <string name="security_settings_summary">Set My Location, screen unlock, SIM card lock, credential storage lock</string>
 
 <string name="cdma_security_settings_summary">Set My Location, screen unlock, credential storage lock</string>
 
 <string name="security_passwords_title">Passwords</string>

<string name="crypt_keeper_settings_title">Encryption</string>

<string name="crypt_keeper_encrypt_title" product="tablet">Encrypt tablet</string>
 
 <string name="crypt_keeper_encrypt_title" product="default">Encrypt phone</string>

<string name="crypt_keeper_encrypt_summary" product="tablet">
 Require a numeric PIN or password to decrypt your tablet each time you
 power it on</string>
 
 <string name="crypt_keeper_encrypt_summary" product="default">
 Require a numeric PIN or password to decrypt your phone each time you
 power it on</string>
 
 <string name="crypt_keeper_encrypted_summary">Encrypted</string>

<string name="crypt_keeper_desc" product="tablet">
 You can encrypt your accounts, settings, downloaded apps and their data,
 media, and other files. Once you encrypt your tablet, you must enter a numeric PIN
 or password to decrypt it each time you power it on: you can\'t unencrypt your tablet
 except by performing a factory data reset, erasing all your data.\n\nEncryption takes
 an hour or more. You must start with a charged battery and keep your tablet plugged in
 until encryption is complete. If you interrupt the encryption process, you will lose
 some or all of your data.</string>
 
 <string name="crypt_keeper_desc" product="default">
 You can encrypt your accounts, settings, downloaded apps and their data,
 media, and other files. Once you encrypt your phone, you must enter a numeric PIN or
 password to decrypt it each time you power it on: you can\'t unencrypt your phone
 except by performing a factory data reset, erasing all your data.\n\nEncryption takes
 an hour or more. You must start with a charged battery and keep your phone plugged in
 until encryption is complete. If you interrupt the encryption process, you will lose
 some or all of your data.</string>

<string name="crypt_keeper_button_text" product="tablet">Encrypt tablet</string>
 
 <string name="crypt_keeper_button_text" product="default">Encrypt phone</string>

<string name="crypt_keeper_low_charge_text">Charge your battery and try again.</string>
 
 <string name="crypt_keeper_unplugged_text">Plug in your charger and try again.</string>

<string name="crypt_keeper_dialog_need_password_title">No lock screen PIN or password</string>
 
 <string name="crypt_keeper_dialog_need_password_message">You must set a lock screen PIN or
 password before you can start encryption.</string>

<string name="crypt_keeper_confirm_title">Confirm encryption</string>
 
 <string name="crypt_keeper_final_desc" product="tablet">
 Encrypt tablet? This operation is irreversible and if you interrupt it, you will lose data.
 Encryption takes an hour or more, during which the tablet will restart several times.
 </string>
 
 <string name="crypt_keeper_final_desc" product="default">
 Encrypt phone? This operation is irreversible and if you interrupt it, you will lose data.
 Encryption takes an hour or more, during which the phone will restart several times.
 </string>

<string name="crypt_keeper_setup_title">Encrypting</string>

<string name="crypt_keeper_setup_description" product="tablet">Wait while your tablet
 is being encrypted. <xliff:g id="percent" example="50">^1</xliff:g>% complete.</string>
 
 <string name="crypt_keeper_setup_description" product="default">Wait while your phone
 is being encrypted. <xliff:g id="percent" example="50">^1</xliff:g>% complete.</string>

<string name="crypt_keeper_cooldown">Try again in <xliff:g id="delay" example="15">^1</xliff:g> seconds.</string>

<string name="crypt_keeper_enter_password">Type your password</string>

<string name="crypt_keeper_failed_title">Encryption unsuccessful</string>

<string name="crypt_keeper_failed_summary" product="tablet">
 Encryption was interrupted and can\'t complete. As a result, the data on
 your tablet is no longer accessible.
 \n\n
 To resume using your tablet, you must perform a factory reset.
 When you set up your tablet after the reset, you\'ll have an opportunity
 to restore any data that was backed up to your Google Account.
 </string>

<string name="crypt_keeper_failed_summary" product="default">
 Encryption was interrupted and can\'t complete. As a result, the data on
 your phone is no longer accessible.
 \n\nTo resume using your phone, you must perform a factory reset.
 When you set up your phone after the reset, you\'ll have an opportunity
 to restore any data that was backed up to your Google Account.
 </string>

<skip />

<skip />
 
 <string name="lock_settings_picker_title">Select screen lock</string>

<string name="backup_lock_settings_picker_title">Choose backup lock</string>

<skip />
 
 <string name="unlock_set_unlock_launch_picker_title">Screen lock</string>

<string name="unlock_set_unlock_launch_picker_change_title">Change lock screen</string>

<string name="unlock_set_unlock_launch_picker_change_summary">Change or disable pattern, PIN, or password security</string>

<string name="unlock_set_unlock_launch_picker_enable_summary">Choose a method to lock the screen</string>

<string name="unlock_backup_info_summary">When Face Unlock can\'t see you, how do you want to unlock?</string>

<string name="unlock_set_unlock_off_title">None</string>
 
 <string name="unlock_set_unlock_off_summary"></string>

<string name="unlock_set_unlock_none_title">Slide</string>
 
 <string name="unlock_set_unlock_none_summary">No security</string>

<string name="unlock_set_unlock_biometric_weak_title">Face Unlock</string>
 
 <string name="unlock_set_unlock_biometric_weak_summary">Low security, experimental</string>

<string name="unlock_set_unlock_pattern_title">Pattern</string>
 
 <string name="unlock_set_unlock_pattern_summary">Medium security</string>

<string name="unlock_set_unlock_pin_title">PIN</string>
 
 <string name="unlock_set_unlock_pin_summary">Medium to high security</string>

<string name="unlock_set_unlock_password_title">Password</string>
 
 <string name="unlock_set_unlock_password_summary">High security</string>

<string name="unlock_set_unlock_disabled_summary">Disabled by administrator, encryption policy, or credential storage</string>

<string name="unlock_set_unlock_mode_off">None</string>
 
 <string name="unlock_set_unlock_mode_none">Slide</string>
 
 <string name="unlock_set_unlock_mode_biometric_weak">Face Unlock</string>
 
 <string name="unlock_set_unlock_mode_pattern">Secured with pattern</string>
 
 <string name="unlock_set_unlock_mode_pin">Secured with PIN</string>
 
 <string name="unlock_set_unlock_mode_password">Secured with password</string>

<string name="unlock_disable_lock_title">Turn off screen lock</string>

<string name="unlock_disable_lock_pattern_summary">Remove unlock pattern</string>
 
 <string name="unlock_disable_lock_pin_summary">Remove unlock PIN</string>
 
 <string name="unlock_disable_lock_password_summary">Remove unlock password</string>

<string name="unlock_change_lock_pattern_title">Change unlock pattern</string>
 
 <string name="unlock_change_lock_pin_title">Change unlock PIN</string>
 
 <string name="unlock_change_lock_password_title">Change unlock password</string>

<string name="lockpassword_password_too_short">Password must be at least %d characters</string>
 
 <string name="lockpassword_pin_too_short">PIN must be at least %d characters</string>

<string name="lockpassword_press_continue">Touch Continue when done</string>

<string name="lockpassword_continue_label">Continue</string>

<string name="lockpassword_password_too_long">Password must be fewer than <xliff:g id="number" example="17">%d</xliff:g> characters</string>
 
 <string name="lockpassword_pin_too_long">PIN must be fewer than <xliff:g id="number" example="17">%d</xliff:g> digits</string>

<string name="lockpassword_pin_contains_non_digits">PIN must contain only digits 0-9</string>

<string name="lockpassword_pin_recently_used">Device administrator disallows using a recent PIN</string>

<string name="lockpassword_illegal_character">Password contains an illegal character</string>

<string name="lockpassword_password_requires_alpha">Password must contain at least one letter</string>

<string name="lockpassword_password_requires_digit">Password must contain at least one digit</string>

<string name="lockpassword_password_requires_symbol">Password must contain at least one symbol</string>

<plurals name="lockpassword_password_requires_letters">
 <item quantity="one">Password must contain at least 1 letter</item>
 <item quantity="other">Password must contain at least %d letters</item>
 </plurals>

<plurals name="lockpassword_password_requires_lowercase">
 <item quantity="one">Password must contain at least 1 lowercase letter</item>
 <item quantity="other">Password must contain at least %d lowercase letters</item>
 </plurals>

<plurals name="lockpassword_password_requires_uppercase">
 <item quantity="one">Password must contain at least 1 uppercase letter</item>
 <item quantity="other">Password must contain at least %d uppercase letters</item>
 </plurals>

<plurals name="lockpassword_password_requires_numeric">
 <item quantity="one">Password must contain at least 1 numerical digit</item>
 <item quantity="other">Password must contain at least %d numerical digits</item>
 </plurals>

<plurals name="lockpassword_password_requires_symbols">
 <item quantity="one">Password must contain at least 1 special symbol</item>
 <item quantity="other">Password must contain at least %d special symbols</item>
 </plurals>

<plurals name="lockpassword_password_requires_nonletter">
 <item quantity="one">Password must contain at least 1 non-letter character</item>
 <item quantity="other">Password must contain at least %d non-letter characters</item>
 </plurals>

<string name="lockpassword_password_recently_used">Device administrator disallows using a recent password</string>

<string name="lockpassword_ok_label">OK</string>

<string name="lockpassword_cancel_label">Cancel</string>

<string name="lockpattern_tutorial_cancel_label">Cancel</string>

<string name="lockpattern_tutorial_continue_label">Next</string>

<string name="lock_setup" msgid="5507462851158901718">Setup complete</string>

<string name="device_admin_title">Device administration</string>

<string name="manage_device_admin">Device administrators</string>

<string name="manage_device_admin_summary">View or deactivate device administrators</string>

<string name="bluetooth_quick_toggle_title">Bluetooth</string>
 
 <string name="bluetooth_quick_toggle_summary">Turn on Bluetooth</string>
 
 <string name="bluetooth_settings">Bluetooth</string>
 
 <string name="bluetooth_settings_title">Bluetooth</string>
 
 <string name="bluetooth_settings_summary">Manage connections, set device name & discoverability</string>

<string name="bluetooth_pairing_request">Bluetooth pairing request</string>

<string name="bluetooth_enter_pin_msg">To pair with:<xliff:g id="bold"> </xliff:g><xliff:g id="device_name">%1$s</xliff:g><xliff:g id="end_bold"> </xliff:g>Type the device\'s required PIN:</string>

<string name="bluetooth_enter_passkey_msg">To pair with:<xliff:g id="bold"> </xliff:g><xliff:g id="device_name">%1$s</xliff:g><xliff:g id="end_bold"> </xliff:g>Type the device\'s required passkey:</string>

<string name="bluetooth_enable_alphanumeric_pin">PIN contains letters or symbols</string>

<string name="bluetooth_pin_values_hint">Usually 0000 or 1234</string>

<string name="bluetooth_enter_pin_other_device">You may also need to enter this PIN on the other device.</string>
 
 <string name="bluetooth_enter_passkey_other_device">You may also need to enter this passkey on the other device.</string>

<string name="bluetooth_confirm_passkey_msg">To pair with: <xliff:g id="device_name">%1$s</xliff:g> Make sure it is showing this passkey: <xliff:g id="passkey">%2$s</xliff:g></string>

<string name="bluetooth_incoming_pairing_msg">From: <xliff:g id="device_name">%1$s</xliff:g> Pair with this device?</string>

<string name="bluetooth_display_passkey_pin_msg">To pair with:<xliff:g id="bold1"> </xliff:g><xliff:g id="device_name">%1$s</xliff:g><xliff:g id="end_bold1"> </xliff:g>Type on it:<xliff:g id="bold2"> </xliff:g><xliff:g id="passkey">%2$s</xliff:g><xliff:g id="end_bold2"></xliff:g>, then press Return or Enter.</string>

<string name="bluetooth_pairing_accept">Pair</string>
 
 <string name="bluetooth_pairing_decline">Cancel</string>

<string name="bluetooth_error_title"></string>
 
 <string name="bluetooth_pairing_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g>.</string>
 
 <string name="bluetooth_pairing_pin_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g> because of an incorrect PIN or passkey.</string>
 
 <string name="bluetooth_pairing_device_down_error_message">Can\'t communicate with <xliff:g id="device_name">%1$s</xliff:g>.</string>
 
 <string name="bluetooth_pairing_rejected_error_message">Pairing rejected by <xliff:g id="device_name">%1$s</xliff:g>.</string>

<string name="bluetooth_connecting_error_message">There was a problem connecting to <xliff:g id="device_name">%1$s</xliff:g>.</string>

<string name="bluetooth_preference_scan_title">Scan for devices</string>
 
 <string name="bluetooth_search_for_devices">Search for devices</string>
 
 <string name="bluetooth_searching_for_devices">Searching\u2026</string>
 
 <string name="bluetooth_preference_device_settings">Device settings</string>
 
 <string name="bluetooth_preference_paired_devices">Paired devices</string>
 
 <string name="bluetooth_preference_found_devices">Available devices</string>
 
 <string name="bluetooth_device_context_connect">Connect</string>
 
 <string name="bluetooth_device_context_disconnect">Disconnect</string>
 
 <string name="bluetooth_device_context_pair_connect">Pair & connect</string>
 
 <string name="bluetooth_device_context_unpair">Unpair</string>
 
 <string name="bluetooth_device_context_disconnect_unpair">Disconnect & unpair</string>
 
 <string name="bluetooth_device_context_connect_advanced">Options\u2026</string>
 
 <string name="bluetooth_menu_advanced">Advanced</string>
 
 <string name="bluetooth_advanced_titlebar">Advanced Bluetooth</string>
 
 <string name="bluetooth_empty_list_bluetooth_off">To see devices, turn Bluetooth on.</string>

<string name="bluetooth_connect_specific_profiles_title">Connect to\u2026</string>

<string name="bluetooth_profile_a2dp">Media audio</string>
 
 <string name="bluetooth_profile_headset">Phone audio</string>
 
 <string name="bluetooth_profile_opp">File transfer</string>
 
 <string name="bluetooth_profile_hid">Input device</string>
 
 <string name="bluetooth_profile_pan">Internet access</string>
 
 <string name="bluetooth_profile_pan_nap">Internet connection sharing</string>

<string name="bluetooth_disconnect_a2dp_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from media audio.</string>
 
 <string name="bluetooth_disconnect_headset_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from handsfree audio.</string>
 
 <string name="bluetooth_disconnect_hid_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from input device.</string>
 
 <string name="bluetooth_disconnect_pan_user_profile">Internet access via <xliff:g id="device_name">%1$s</xliff:g> will be disconnected.</string>
 
 <string name="bluetooth_disconnect_pan_nap_profile" product="tablet"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from sharing this tablet\'s Internet connection.</string>
 
 <string name="bluetooth_disconnect_pan_nap_profile" product="default"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from sharing this phone\'s Internet connection.</string>

<string name="bluetooth_device_advanced_title">Paired Bluetooth device</string>
 
 <string name="bluetooth_device_advanced_online_mode_title">Connect</string>
 
 <string name="bluetooth_device_advanced_online_mode_summary">Connect to Bluetooth device</string>
 
 <string name="bluetooth_device_advanced_profile_header_title">Profiles</string>
 
 <string name="bluetooth_device_advanced_rename_device">Rename</string>
 
 <string name="bluetooth_device_advanced_enable_opp_title">Allow incoming file transfers</string>
 
 <string name="bluetooth_a2dp_profile_summary_connected">Connected to media audio</string>
 
 <string name="bluetooth_headset_profile_summary_connected">Connected to phone audio</string>
 
 <string name="bluetooth_opp_profile_summary_connected">Connected to file transfer server</string>
 
 <string name="bluetooth_opp_profile_summary_not_connected">Not connected to file transfer server</string>
 
 <string name="bluetooth_hid_profile_summary_connected">Connected to input device</string>
 
 <string name="bluetooth_pan_user_profile_summary_connected">Connected to device for Internet access</string>
 
 <string name="bluetooth_pan_nap_profile_summary_connected">Sharing local Internet connection with device</string>

<string name="bluetooth_a2dp_profile_summary_use_for">Use for media audio</string>
 
 <string name="bluetooth_headset_profile_summary_use_for">Use for phone audio</string>
 
 <string name="bluetooth_opp_profile_summary_use_for">Use for file transfer</string>
 
 <string name="bluetooth_hid_profile_summary_use_for">Use for input</string>
 
 <string name="bluetooth_pan_profile_summary_use_for">Use for Internet access</string>

<string name="bluetooth_dock_settings">Dock Settings</string>
 
 <string name="bluetooth_dock_settings_title">Use dock for audio</string>
 
 <string name="bluetooth_dock_settings_headset">As speaker phone</string>
 
 <string name="bluetooth_dock_settings_a2dp">For music and media</string>
 
 <string name="bluetooth_dock_settings_remember">Remember settings</string>

<string name="nfc_quick_toggle_title">NFC</string>
 
 <string name="nfc_quick_toggle_summary">Allow data exchange when the phone touches another device</string>
 
 <string name="android_beam_settings_title">Android Beam</string>
 
 <string name="android_beam_on_summary">Ready to transmit app content via NFC</string>
 
 <string name="android_beam_off_summary">Off</string>
 
 <string name="android_beam_disabled_summary">Unavailable because NFC is turned off</string>
 
 <string name="android_beam_label">Android Beam</string>
 
 <string name="android_beam_explained">When this feature is turned on, you can beam app content to another NFC-capable device by holding the devices close together. For example, you can beam Browser pages, YouTube videos, People contacts, and more.\n\nJust bring the devices together (typically back to back) and then touch your screen. The app determines what gets beamed.</string>

<skip />
 
 <string name="wifi_quick_toggle_title">WiFi</string>
 
 <string name="wifi_quick_toggle_summary">Turn on WiFi</string>
 
 <string name="wifi_settings">WiFi</string>
 
 <string name="wifi_settings_category">WiFi settings</string>
 
 <string name="wifi_settings_title">WiFi</string>
 
 <string name="wifi_settings_summary">Set up & manage wireless access points</string>
 
 <string name="wifi_starting">Turning WiFi on\u2026</string>
 
 <string name="wifi_stopping">Turning off WiFi\u2026</string>
 
 <string name="wifi_error">Error</string>
 
 <string name="wifi_in_airplane_mode">In Airplane mode</string>
 
 <string name="wifi_fail_to_scan">Can\'t scan for networks</string>
 
 <string name="wifi_notify_open_networks">Network notification</string>
 
 <string name="wifi_notify_open_networks_summary">Notify me when an open network is available</string>
 
 <string name="wifi_enable_watchdog_service">Avoid poor connections</string>
 
 <string name="wifi_enable_watchdog_service_summary">Don\'t use a WiFi network unless it has a good Internet connection</string>
 
 <string name="wifi_setting_sleep_policy_title">Keep WiFi on during sleep</string>
 
 <string name="wifi_setting_sleep_policy_error">There was a problem changing the setting</string>
 
 <string name="wifi_add_network">Add network</string>
 
 <string name="wifi_access_points">WiFi networks</string>
 
 <string name="wifi_menu_scan">Scan</string>
 
 <string name="wifi_menu_advanced">Advanced</string>
 
 <string name="wifi_menu_connect">Connect to network</string>
 
 <string name="wifi_menu_forget">Forget network</string>
 
 <string name="wifi_menu_modify">Modify network</string>
 
 <string name="wifi_empty_list_wifi_off">To see available networks, turn WiFi on.</string>

<skip />
 
 <string name="wifi_show_advanced">Show advanced options</string>
 
 <string name="wifi_network_setup">WPS</string>
 
 <string name="wifi_wps_pin">Type PIN from access point</string>
 
 <string name="wifi_wps_setup_title">WPS setup</string>
 
 <string name="wifi_wps_pin_output">Type the PIN <xliff:g id="wps_pin">%1$s</xliff:g> on the access point</string>
 
 <string name="wifi_wps_in_progress">WPS is already in progress and can take tens of seconds to complete</string>
 
 <string name="wifi_wps_failed">Couldn\'t start WPS, try again.</string>
 
 <string name="wifi_ssid">Network SSID</string>
 
 <string name="wifi_security">Security</string>
 
 <string name="wifi_signal">Signal strength</string>
 
 <string name="wifi_status">Status</string>
 
 <string name="wifi_speed">Link speed</string>
 
 <string name="wifi_ip_address">IP address</string>
 
 <string name="wifi_ip_address_hint" translatable="false">192.168.1.128</string>
 
 <string name="wifi_eap_method">EAP method</string>
 
 <string name="please_select_phase2">Phase 2 authentication</string>
 
 <string name="wifi_eap_ca_cert">CA certificate</string>
 
 <string name="wifi_eap_user_cert">User certificate</string>
 
 <string name="wifi_eap_identity">Identity</string>
 
 <string name="wifi_eap_anonymous">Anonymous identity</string>
 
 <string name="wifi_password">Password</string>
 
 <string name="wifi_show_password">Show password</string>
 
 <string name="wifi_ip_settings">IP settings</string>
 
 <string name="wifi_unchanged">(unchanged)</string>
 
 <string name="wifi_unspecified">(unspecified)</string>
 
 <string name="wifi_remembered">Saved</string>
 
 <string name="wifi_disabled_generic">Disabled</string>
 
 <string name="wifi_disabled_network_failure">Avoided poor Internet connection</string>
 
 <string name="wifi_disabled_heading"></string>
 
 <string name="wifi_disabled_help">The network was avoided due to poor connection. Turn off this behavior from the Settings > WiFi screen, Advanced menu item.</string>
 
 <string name="wifi_disabled_password_failure">Authentication problem</string>
 
 <string name="wifi_not_in_range">Not in range</string>
 
 <string name="wifi_wps_available_first_item">Protected network available</string>
 
 <string name="wifi_wps_available_second_item">\u0020(protected network available)</string>
 
 <string name="wifi_secured_first_item">Secured with <xliff:g id="wifi_security_short">%1$s</xliff:g></string>
 
 <string name="wifi_secured_second_item">, secured with <xliff:g id="wifi_security_short">%1$s</xliff:g></string>

<string name="wifi_security_short_wep">WEP</string>
 
 <string name="wifi_security_short_wpa">WPA</string>
 
 <string name="wifi_security_short_wpa2">WPA2</string>
 
 <string name="wifi_security_short_wpa_wpa2">WPA/WPA2</string>
 
 <string name="wifi_security_short_psk_generic">@string/wifi_security_short_wpa_wpa2</string>
 
 <string name="wifi_security_short_eap">802.1x</string>

<string name="wifi_security_none">None</string>

<string name="wifi_security_wep">WEP</string>
 
 <string name="wifi_security_wpa">WPA PSK</string>
 
 <string name="wifi_security_wpa2">WPA2 PSK</string>
 
 <string name="wifi_security_wpa_wpa2">WPA/WPA2 PSK</string>
 
 <string name="wifi_security_psk_generic">@string/wifi_security_wpa_wpa2</string>
 
 <string name="wifi_security_eap">802.1x EAP</string>

<string name="wifi_connect">Connect</string>
 
 <string name="wifi_forget">Forget</string>
 
 <string name="wifi_save">Save</string>
 
 <string name="wifi_cancel">Cancel</string>

<string name="wifi_wps_overlap_error">Another WiFi protected session was detected. Try again in a few minutes.</string>

<skip />
 
 <string name="wifi_advanced_titlebar">Advanced WiFi</string>
 
 <string name="wifi_setting_frequency_band_title">WiFi frequency band</string>
 
 <string name="wifi_setting_frequency_band_summary">Specify the frequency range of operation</string>
 
 <string name="wifi_setting_frequency_band_error">There was a problem setting the frequency band.</string>
 
 <string name="wifi_advanced_mac_address_title">MAC address</string>
 
 
 <string name="wifi_advanced_ip_address_title">IP address</string>

<string name="wifi_advanced_settings_label">IP settings</string>
 
 <string name="wifi_ip_settings_menu_save">Save</string>
 
 <string name="wifi_ip_settings_menu_cancel">Cancel</string>
 
 <string name="wifi_ip_settings_invalid_ip_address">Type a valid IP address.</string>
 
 <string name="wifi_ip_settings_invalid_gateway">Type a valid gateway address.</string>
 
 <string name="wifi_ip_settings_invalid_dns">Type a valid DNS address.</string>
 
 <string name="wifi_ip_settings_invalid_network_prefix_length">Type a network prefix length between 0 and 32.</string>
 
 <string name="wifi_dns1">DNS 1</string>
 
 <string name="wifi_dns1_hint" translatable="false">8.8.8.8</string>
 
 <string name="wifi_dns2">DNS 2</string>
 
 <string name="wifi_dns2_hint" translatable="false">4.4.4.4</string>
 
 <string name="wifi_gateway">Gateway</string>
 
 <string name="wifi_gateway_hint" translatable="false">192.168.1.1</string>
 
 <string name="wifi_network_prefix_length">Network prefix length</string>
 
 <string name="wifi_network_prefix_length_hint" translatable="false">24</string>

<string name="wifi_p2p_settings_title">WiFi direct</string>
 
 <string name="wifi_p2p_settings_summary">Set up peer-to-peer connectivity</string>
 <string name="wifi_p2p_device_info">Device information</string>
 <string name="wifi_p2p_wps_setup">WiFi protected setup</string>
 <string name="wifi_p2p_wps_pin">Type PIN</string>
 <string name="wifi_p2p_persist_network">Remember this connection</string>
 
 <string name="wifi_p2p_menu_search">Search</string>
 
 <string name="wifi_p2p_menu_create_group">Create group</string>
 
 <string name="wifi_p2p_menu_remove_group">Remove group</string>
 
 <string name="wifi_p2p_menu_advanced">Advanced</string>
 
 <string name="wifi_p2p_available_devices">Available devices</string>

<string name="wifi_tether_checkbox_text">Portable WiFi hotspot</string>
 
 <string name="wifi_tether_enabled_subtext">Portable hotspot <xliff:g id="network_ssid">%1$s</xliff:g> active</string>
 
 <string name="wifi_tether_failed_subtext">Portable WiFi hotspot error</string>
 
 <string name="wifi_tether_configure_ap_text">Configure WiFi hotspot</string>
 
 <string name="wifi_tether_configure_subtext"><xliff:g id="network_ssid">%1$s</xliff:g> <xliff:g id="network_security">%2$s</xliff:g> portable WiFi hotspot</string>
 
 <string name="wifi_tether_configure_ssid_default">AndroidHotspot</string>

<string name="testing_wifi_info" translatable="false">WiFi information</string>
 
 <string name="disableNetwork" translatable="false">disableNetwork</string>
 
 <string name="enableNetwork" translatable="false">enableNetwork</string>
 
 <string name="disconnect" translatable="false">disconnect</string>
 
 <string name="getConfiguredNetworks" translatable="false">getConfiguredNetworks</string>
 
 <string name="getConnectionInfo" translatable="false">getConnectionInfo</string>
 
 <string name="wifi_api_test" translatable="false">WiFi API</string>
 
 <string name="wifi_status_test" translatable="false">WiFi status</string>
 
 <string name="wifi_update" translatable="false">Refresh stats</string>
 
 <string name="wifi_state_label" translatable="false">WiFi state:</string>
 
 <string name="network_state_label" translatable="false">Network state:</string>
 
 <string name="supplicant_state_label" translatable="false">Supplicant state:</string>
 
 <string name="rssi_label" translatable="false">RSSI:</string>
 
 <string name="bssid_label" translatable="false">BSSID:</string>
 
 <string name="ssid_label" translatable="false">SSID:</string>
 
 <string name="hidden_ssid_label" translatable="false">Hidden SSID:</string>
 
 <string name="ipaddr_label" translatable="false">IPaddr:</string>
 
 <string name="macaddr_label" translatable="false">MAC addr:</string>
 
 <string name="networkid_label" translatable="false">Network ID:</string>
 
 <string name="link_speed_label" translatable="false">Link speed:</string>
 
 <string name="scan_list_label" translatable="false">Scan results:</string>

<string name="wifi_state_disabling" translatable="false">Disabling</string>
 
 <string name="wifi_state_disabled" translatable="false">Disabled</string>
 
 <string name="wifi_state_enabling" translatable="false">Enabling</string>
 
 <string name="wifi_state_enabled" translatable="false">Enabled</string>
 
 <string name="wifi_state_unknown" translatable="false">Unknown</string>

<string name="wifi_config_info" translatable="false">WiFi config</string>
 
 <string name="config_list_label" translatable="false">Configured networks</string>

<skip/>
 
 <string name="display_settings_title">Display</string>
 
 <string name="sound_settings">Sound</string>
 
 <string name="silent_mode_title">Silent mode</string>
 
 <string name="ringtone_title">Phone ringtone</string>
 
 <string name="ringtone_summary">""</string>
 
 <string name="all_volume_title">Volumes</string>
 
 <string name="musicfx_title">Music effects</string>
 
 <string name="ring_volume_title">Ringer volume</string>
 
 <string name="vibrate_in_silent_title">Vibrate when silent</string>
 
 <string name="vibrate_title">Vibrate</string>
 
 <string name="notification_sound_title">Default notification</string>
 
 <string name="notification_pulse_title">Pulse notification light</string>
 
 <string name="incoming_call_volume_title">Ringtone</string>
 
 <string name="notification_volume_title">Notification</string>
 
 <string name="checkbox_notification_same_as_incoming_call">Use incoming call volume for notifications</string>
 
 <string name="notification_sound_dialog_title">Choose notification ringtone</string>
 
 <string name="media_volume_title">Media</string>
 
 <string name="media_volume_summary">Set volume for music and videos</string>
 
 <string name="alarm_volume_title">Alarm</string>
 
 <string name="dock_settings_summary">Audio settings for the attached dock</string>
 
 <string name="dtmf_tone_enable_title">Dial pad touch tones</string>
 
 <string name="sound_effects_enable_title">Touch sounds</string>
 
 <string name="lock_sounds_enable_title">Screen lock sound</string>
 
 <string name="haptic_feedback_enable_title">Vibrate on touch</string>
 
 <string name="audio_record_proc_title">Noise cancellation</string>
 
 <string name="volume_media_description">Music, video, games, & other media</string>
 
 <string name="volume_ring_description">Ringtone & notifications</string>
 
 <string name="volume_notification_description">Notifications</string>
 
 <string name="volume_alarm_description">Alarms</string>

<string name="dock_settings">Dock</string>
 
 <string name="dock_settings_title">Dock settings</string>
 
 <string name="dock_audio_settings_title">Audio</string>
 
 <string name="dock_audio_summary_desk">Settings for the attached desktop dock</string>
 
 <string name="dock_audio_summary_car">Settings for the attached car dock</string>
 
 <string name="dock_audio_summary_none" product="tablet">Tablet not docked</string>
 
 <string name="dock_audio_summary_none" product="default">Phone not docked</string>
 
 <string name="dock_audio_summary_unknown">Settings for the attached dock</string>
 
 <string name="dock_not_found_title">Dock not found</string>
 
 <string name="dock_not_found_text" product="tablet">You must dock the tablet before setting up dock audio.</string>
 
 <string name="dock_not_found_text" product="default">You must dock the phone before setting up dock audio.</string>
 
 <string name="dock_sounds_enable_title">Dock insert sound</string>
 
 <string name="dock_sounds_enable_summary_on" product="tablet">Play sound when inserting or removing tablet from dock</string>
 
 <string name="dock_sounds_enable_summary_on" product="default">Play sound when inserting or removing phone from dock</string>
 
 <string name="dock_sounds_enable_summary_off" product="tablet">Don\'t play sound when inserting or removing tablet from dock</string>
 
 <string name="dock_sounds_enable_summary_off" product="default">Don\'t play sound when inserting or removing phone from dock</string>

<string name="sync_settings">Accounts & sync</string>

<string name="search_settings">Search</string>
 
 <string name="search_settings_summary">Manage search settings and history</string>

<skip/>
 
 <string name="display_settings">Display</string>
 
 <string name="accelerometer_title">Auto-rotate screen</string>
 
 <string name="accelerometer_summary_on" product="tablet">Switch orientation automatically when rotating tablet</string>
 
 <string name="accelerometer_summary_on" product="default">Switch orientation automatically when rotating phone</string>
 
 <string name="accelerometer_summary_off" product="tablet">Switch orientation automatically when rotating tablet</string>
 
 <string name="accelerometer_summary_off" product="default">Switch orientation automatically when rotating phone</string>
 
 <string name="brightness">Brightness</string>
 
 <string name="brightness_summary">Adjust the brightness of the screen</string>
 
 <string name="screen_timeout">Sleep</string>
 
 <string name="screen_timeout_summary">After <xliff:g id="timeout_description">%1$s</xliff:g> of inactivity</string>
 
 <string name="wallpaper_settings_title">Wallpaper</string>
 
 <string name="wallpaper_settings_fragment_title">Choose wallpaper from</string>
 
 <string name="dream_settings_title">Android Dreams</string>
 
 <string name="dream_settings_summary">Screen savers and other idle diversions</string>
 
 <string name="dream_component_title">Selected dream</string>
 
 <string name="dream_timeout_title">When to activate</string>
 
 <string name="dream_timeout_summary">After <xliff:g id="timeout_description">%1$s</xliff:g> spent idle</string>
 
 <string name="dream_timeout_zero_summary">Never</string>
 
 <string name="dream_test">Try it!</string>
 
 <string name="automatic_brightness">Automatic brightness</string>
 
 <string name="title_font_size">Font size</string>
 
 <string name="summary_font_size" translatable="false">%1$s</string>
 
 <string name="dialog_title_font_size">Font size</string>

<string name="sim_lock_settings">SIM card lock settings</string>
 
 <string name="sim_lock_settings_category">Set up SIM card lock</string>
 
 <string name="sim_lock_settings_title">SIM card lock</string>
 
 <string name="sim_pin_toggle">Lock SIM card</string>
 
 <string name="sim_lock_on" product="tablet">Require PIN to use tablet</string>
 
 <string name="sim_lock_on" product="default">Require PIN to use phone</string>
 
 <string name="sim_lock_off" product="tablet">Require PIN to use tablet</string>
 
 <string name="sim_lock_off" product="default">Require PIN to use phone</string>
 
 <string name="sim_pin_change">Change SIM PIN</string>
 
 <string name="sim_enter_pin">SIM PIN</string>
 
 <string name="sim_enable_sim_lock">Lock SIM card</string>
 
 <string name="sim_disable_sim_lock">Unlock SIM card</string>
 
 <string name="sim_enter_old">Old SIM PIN</string>
 
 <string name="sim_enter_new">New SIM PIN</string>
 <string name="sim_reenter_new">Re-type new PIN</string>
 
 <string name="sim_change_pin">SIM PIN</string>
 
 <string name="sim_bad_pin">Incorrect PIN</string>
 
 <string name="sim_pins_dont_match">PINs don\'t match</string>
 
 <string name="sim_change_failed">Can\'t change PIN.\nPossibly incorrect PIN.</string>
 
 <string name="sim_change_succeeded">SIM PIN changed successfully</string>
 
 <string name="sim_lock_failed">Can\'t change SIM card lock state.\nPossibly incorrect PIN.</string>
 
 <string name="sim_enter_ok">OK</string>
 
 <string name="sim_enter_cancel">Cancel</string>

<string name="device_info_settings" product="tablet">Tablet status</string>
 
 <string name="device_info_settings" product="default">Phone status</string>

<string name="system_update_settings_list_item_title">System updates</string>
 
 <string name="system_update_settings_list_item_summary">""</string>

<string name="firmware_version">Android version</string>
 
 <string name="model_number">Model number</string>
 
 <string name="baseband_version">Baseband version</string>
 
 <string name="kernel_version">Kernel version</string>
 
 <string name="build_number">Build number</string>

<string name="device_info_not_available">Not available</string>
 
 <string name="device_status_activity_title">Status</string>
 
 <string name="device_status">Status</string>
 
 <string name="device_status_summary" product="tablet">Status of the battery, network, and other information</string>
 
 <string name="device_status_summary" product="default">Phone number, signal, etc.</string>
 
 <string name="storage_settings" >Storage</string>
 
 <string name="storage_settings_title">Storage settings</string>
 
 <string name="storage_settings_summary" product="nosdcard">Unmount USB storage, view available storage</string>
 
 <string name="storage_settings_summary" product="default">Unmount SD card, view available storage</string>
 
 <string name="status_imei">IMEI</string>
 
 <string name="status_imei_sv">IMEI SV</string>
 
 <string name="status_number" product="tablet">MDN</string>
 
 <string name="status_number" product="default">My phone number</string>
 
 <string name="status_min_number">MIN</string>
 
 <string name="status_msid_number">MSID</string>
 
 <string name="status_prl_version">PRL Version</string>
 
 <string name="status_meid_number">MEID</string>
 
 <string name="status_icc_id">ICCID</string>
 
 <string name="status_network_type">Mobile network type</string>
 
 <string name="status_data_state">Mobile network state</string>
 
 <string name="status_service_state">Service state</string>
 
 <string name="status_signal_strength">Signal strength</string>
 
 <string name="status_roaming">Roaming</string>
 
 <string name="status_operator">Network</string>
 
 <string name="status_wifi_mac_address">WiFi MAC address</string>
 
 <string name="status_bt_address">Bluetooth address</string>
 
 <string name="status_serial_number">Serial number</string>
 
 <string name="status_unavailable">Unavailable</string>
 
 <string name="status_up_time">Up time</string>
 
 <string name="status_awake_time">Awake time</string>
 
 <string name="internal_memory">Internal storage</string>
 
 <string name="sd_memory" product="nosdcard">USB storage</string>
 
 <string name="sd_memory" product="default">SD card</string>
 
 <string name="memory_available">Available</string>
 
 <string name="memory_size">Total space</string>
 
 <string name="memory_calculating_size">Calculating…</string>
 
 <string name="memory_apps_usage">Apps</string>
 
 <string name="memory_media_usage">Media</string>
 
 <string name="memory_downloads_usage">Downloads</string>
 
 <string name="memory_dcim_usage">Pictures, videos</string>
 
 <string name="memory_music_usage">Audio (music, ringtones, podcasts, etc.)</string>
 
 <string name="memory_media_misc_usage">Misc.</string>
 
 <string name="sd_eject" product="nosdcard">Unmount shared storage</string>
 
 <string name="sd_eject" product="default">Unmount SD card</string>
 
 <string name="sd_eject_summary" product="nosdcard">Unmount the internal USB storage</string>
 
 <string name="sd_eject_summary" product="default">Unmount the SD card so you can safely remove it</string>

<string name="sd_insert_summary" product="nosdcard">Insert USB storage for mounting</string>
 
 <string name="sd_insert_summary" product="default">Insert an SD card for mounting</string>

<string name="sd_mount" product="nosdcard">Mount USB storage</string>
 
 <string name="sd_mount" product="default">Mount SD card</string>

<string name="sd_mount_summary" product="nosdcard"></string>
 
 <string name="sd_mount_summary" product="default"></string>
 
 <string name="sd_format" product="nosdcard">Erase USB storage</string>
 
 <string name="sd_format" product="default">Erase SD card</string>
 
 <string name="sd_format_summary" product="nosdcard">Erases all data on the internal USB storage, such as music and photos</string>
 
 <string name="sd_format_summary" product="default">Erases all data on the SD card, such as music and photos</string>
 
 <string name="read_only">\u0020(Read-only)</string>
 
 <string name="dlg_confirm_unmount_title" product="nosdcard">Unmount USB storage?</string>
 
 <string name="dlg_confirm_unmount_title" product="default">Unmount SD card?</string>
 
 <string name="dlg_confirm_unmount_text" product="nosdcard">If you unmount the USB storage, some apps you are using will stop and may be unavailable until you remount the USB storage.</string>
 
 <string name="dlg_confirm_unmount_text" product="default">If you unmount the SD card, some apps you are using will stop and may be unavailable until you remount the SD card.</string>
 
 <string name="dlg_error_unmount_title" product="nosdcard"></string>
 
 <string name="dlg_error_unmount_title" product="default"></string>
 
 <string name="dlg_error_unmount_text" product="nosdcard">Couldn\'t unmount USB storage. Try again later.</string>
 
 <string name="dlg_error_unmount_text" product="default">Couldn\'t unmount SD card. Try again later.</string>
 
 <string name="unmount_inform_text" product="nosdcard">USB storage will be unmounted.</string>
 
 <string name="unmount_inform_text" product="default">SD card will be unmounted.</string>
 
 <string name="sd_ejecting_title">Unmounting</string>
 
 <string name="sd_ejecting_summary">Unmount in progress</string>

<string name="storage_menu_usb">USB computer connection</string>
 
 <string name="storage_title_usb">USB computer connection</string>
 
 <string name="usb_connection_category">Connect as</string>
 
 <string name="usb_mtp_title">Media device (MTP)</string>
 
 <string name="usb_mtp_summary">Lets you transfer media files on Windows, or using Android File Transfer on Mac (see www.android.com/filetransfer)</string>
 
 <string name="usb_ptp_title">Camera (PTP)</string>
 
 <string name="usb_ptp_summary">Lets you transfer photos using camera software, and transfer any files on computers that don\'t support MTP</string>
 
 <string name="usb_label_installer_cd">"Install file-transfer tools"</string>

<string name="battery_status_title">Battery status</string>
 
 <string name="battery_level_title">Battery level</string>

<string name="apn_settings">APNs</string>
 
 <string name="apn_edit">Edit access point</string>
 
 <string name="apn_not_set">Not set</string>
 
 <string name="apn_name">Name</string>
 
 <string name="apn_apn">APN</string>
 
 <string name="apn_http_proxy">Proxy</string>
 
 <string name="apn_http_port">Port</string>
 
 <string name="apn_user">Username</string>
 
 <string name="apn_password">Password</string>
 
 <string name="apn_server">Server</string>
 
 <string name="apn_mmsc">MMSC</string>
 
 <string name="apn_mms_proxy">MMS proxy</string>
 
 <string name="apn_mms_port">MMS port</string>
 
 <string name="apn_mcc">MCC</string>
 
 <string name="apn_mnc">MNC</string>
 
 <string name="apn_auth_type">Authentication type</string>
 
 <string name="apn_auth_type_none">None</string>
 
 <string name="apn_auth_type_pap">PAP</string>
 
 <string name="apn_auth_type_chap">CHAP</string>
 
 <string name="apn_auth_type_pap_chap">PAP or CHAP</string>
 
 <string name="apn_type">APN type</string>
 
 <string name="apn_protocol">APN protocol</string>
 
 <string name="apn_roaming_protocol">APN roaming protocol</string>
 
 <string name="carrier_enabled">APN enable/disable</string>
 <string name="carrier_enabled_summaryOn">APN enabled</string>
 <string name="carrier_enabled_summaryOff">APN disabled</string>
 
 <string name="bearer">Bearer</string>
 
 <string name="menu_delete">Delete APN</string>
 
 <string name="menu_new">New APN</string>
 
 <string name="menu_save">Save</string>
 
 <string name="menu_cancel">Discard</string>
 
 <string name="error_title"></string>
 
 <string name="error_name_empty">The Name field can\'t be empty.</string>
 
 <string name="error_apn_empty">The APN can\'t be empty.</string>
 
 <string name="error_mcc_not3">MCC field must be 3 digits.</string>
 
 <string name="error_mnc_not23">MNC field must be 2 or 3 digits.</string>
 
 <string name="restore_default_apn">Restoring default APN settings.</string>
 
 <string name="menu_restore">Reset to default</string>
 
 <string name="restore_default_apn_completed">Reset default APN settings completed.</string>

<string name="master_clear_title">Factory data reset</string>
 
 <string name="master_clear_summary" product="tablet">Erases all data on tablet</string>
 
 <string name="master_clear_summary" product="default">Erases all data on phone</string>
 
 <string name="master_clear_desc" product="tablet">"This will erase all data from your tablet\'s internal storage, including:\n\n<li>Your Google account</li>\n<li>System and app data and settings</li>\n<li>Downloaded apps</li>"</string>
 
 <string name="master_clear_desc" product="default">"This will erase all data from your phone\'s internal storage, including:\n\n<li>Your Google account</li>\n<li>System and app data and settings</li>\n<li>Downloaded apps"</li></string>
 
 <string name="master_clear_accounts" product="default">"\n\nYou are currently signed into the following accounts:\n"</string>
 
 <string name="master_clear_desc_also_erases_external">"<li>Music</li>\n<li>Photos</li>\n<li>Other user data</li>"</string>
 
 <string name="master_clear_desc_erase_external_storage" product="nosdcard">"\n\nTo clear music, pictures, and other user data, the USB storage needs to be erased."</string>
 
 <string name="master_clear_desc_erase_external_storage" product="default">"\n\nTo clear music, pictures, and other user data, the SD card needs to be erased."</string>
 
 <string name="erase_external_storage" product="nosdcard">Erase USB storage</string>
 
 <string name="erase_external_storage" product="default">Erase SD card</string>
 
 <string name="erase_external_storage_description" product="nosdcard">Erase all the data on the internal USB storage, such as music or photos</string>
 
 <string name="erase_external_storage_description" product="default">Erase all the data on the SD card, such as music or photos</string>
 
 <string name="master_clear_button_text" product="tablet">Reset tablet</string>
 
 <string name="master_clear_button_text" product="default">Reset phone</string>
 
 <string name="master_clear_final_desc">Erase all your personal information and downloaded apps? You can\'t reverse this action!</string>
 
 <string name="master_clear_final_button_text">Erase everything</string>
 
 <string name="master_clear_gesture_prompt">Draw your unlock pattern</string>
 
 <string name="master_clear_gesture_explanation">You must draw your unlock pattern to confirm a factory data reset.</string>
 
 <string name="master_clear_failed">No reset was performed because the System Clear service isn\'t available.</string>
 
 <string name="master_clear_confirm_title">Reset?</string>

<string name="media_format_title" product="nosdcard">Erase USB storage</string>
 
 <string name="media_format_title" product="default">Erase SD card</string>
 
 <string name="media_format_summary" product="nosdcard">Erases all data in USB storage</string>
 
 <string name="media_format_summary" product="default">Erases all data on the SD card</string>
 
 <string name="media_format_desc" product="nosdcard">Erase all USB storage? You will lose all stored data!</string>
 
 <string name="media_format_desc" product="default">Erase the SD card? You will lose all data on the card!</string>
 
 <string name="media_format_button_text" product="nosdcard">Erase USB storage</string>
 
 <string name="media_format_button_text" product="default">Erase SD card</string>
 
 <string name="media_format_final_desc" product="nosdcard">Erase the USB storage, deleting all files stored there? You can\'t reverse this action!</string>
 
 <string name="media_format_final_desc" product="default">Erase the SD card, deleting all files stored there? You can\'t reverse this action!</string>
 
 <string name="media_format_final_button_text">Erase everything</string>
 
 <string name="media_format_gesture_prompt">Draw your unlock pattern</string>
 
 <string name="media_format_gesture_explanation" product="nosdcard">You must draw your unlock pattern to confirm that you want to erase the USB storage.</string>
 
 <string name="media_format_gesture_explanation" product="default">You must draw your unlock pattern to confirm that you want to erase the SD card.</string>

<string name="call_settings_title">Call settings</string>
 
 <string name="call_settings_summary">Set up voicemail, call forwarding, call waiting, caller ID</string>

<string name="tether_settings_title_usb">USB tethering</string>
 
 <string name="tether_settings_title_wifi">Portable hotspot</string>
 
 <string name="tether_settings_title_bluetooth">Bluetooth tethering</string>
 
 <string name="tether_settings_title_usb_bluetooth">Tethering</string>
 
 <string name="tether_settings_title_all">Tethering & portable hotspot</string>

<string name="usb_title">USB</string>
 <string name="usb_tethering_button_text">USB tethering</string>
 
 <string name="usb_tethering_available_subtext">USB connected, check to tether</string>
 
 <string name="usb_tethering_active_subtext">Tethered</string>
 
 <string name="usb_tethering_storage_active_subtext">Can\'t tether when USB storage is in use</string>
 
 <string name="usb_tethering_unavailable_subtext">USB not connected</string>
 
 <string name="usb_tethering_errored_subtext">USB tethering error</string>

<string name="bluetooth_tether_checkbox_text">Bluetooth tethering</string>
 
 <string name="bluetooth_tethering_available_subtext" product="tablet">Sharing this tablet\'s Internet connection</string>
 
 <string name="bluetooth_tethering_available_subtext" product="default">Sharing this phone\'s Internet connection</string>
 
 <string name="bluetooth_tethering_device_connected_subtext" product="tablet">Sharing this tablet\'s Internet connection to 1 device</string>
 
 <string name="bluetooth_tethering_device_connected_subtext" product="default">Sharing this phone\'s Internet connection to 1 device</string>
 
 <string name="bluetooth_tethering_devices_connected_subtext" product="tablet">Sharing this tablet\'s Internet connection to <xliff:g id="connectedDeviceCount">%1$d</xliff:g> devices</string>
 
 <string name="bluetooth_tethering_devices_connected_subtext" product="default">Sharing this phone\'s Internet connection to <xliff:g id="connectedDeviceCount">%1$d</xliff:g> devices</string>
 
 <string name="bluetooth_tethering_off_subtext" product="tablet">Not sharing this tablet\'s Internet connection</string>
 
 <string name="bluetooth_tethering_off_subtext" product="default">Not sharing this phone\'s Internet connection</string>
 
 <string name="bluetooth_tethering_errored_subtext">Not tethered</string>
 
 <string name="bluetooth_tethering_overflow_error">Can\'t tether to more than <xliff:g id="maxConnection">%1$d</xliff:g> devices.</string>
 
 <string name="bluetooth_untether_blank"><xliff:g id="device_name">%1$s</xliff:g> will be untethered.</string>

<string name="tethering_help_button_text">Help</string>

<string name="network_settings_title">Mobile networks</string>

<string name="location_title">My Location</string>
 
 <string name="location_network_based">Google\'s location service</string>
 
 <string name="location_neighborhood_level">Let apps use data from sources such as WiFi and mobile networks to determine your approximate location</string>
 
 <string name="location_neighborhood_level_wifi">Location determined by WiFi</string>
 
 <string name="location_gps">GPS satellites</string>
 
 <string name="location_street_level">Let apps use GPS to pinpoint your location</string>
 
 <string name="assisted_gps">Use assisted GPS</string>
 
 <string name="assisted_gps_enabled">Use server to assist GPS (uncheck to reduce network usage)</string>
 
 <string name="assisted_gps_disabled">Use server to assist GPS (uncheck to improve GPS performance)</string>
 
 <string name="use_location_title">Location & Google search</string>
 
 <string name="use_location_summary">Let Google use your location to improve search results and other services</string>

<skip />
 
 <string name="about_settings" product="tablet">About tablet</string>
 
 <string name="about_settings" product="default">About phone</string>
 
 <string name="about_settings_summary">View legal info, status, software version</string>
 
 <string name="legal_information">Legal information</string>
 
 <string name="contributors_title">Contributors</string>
  <skip />
 
 <string name="copyright_title">Copyright</string>
  <skip />
 
 <string name="license_title">License</string>
  <skip />
 
 <string name="terms_title">Terms and conditions</string>
 
 <string name="system_tutorial_list_item_title">System tutorial</string>
 
 <string name="system_tutorial_list_item_summary" product="tablet">Learn how to use your tablet</string>
 
 <string name="system_tutorial_list_item_summary" product="default">Learn how to use your phone</string>

<skip />
 
 <string name="settings_license_activity_title">Open source licenses</string>
 
 <string name="settings_license_activity_unavailable">There is a problem loading the licenses.</string>
 
 <string name="settings_license_activity_loading">Loading\u2026</string>

<string name="settings_safetylegal_title">Safety information</string>
 
 <string name="settings_safetylegal_activity_title">Safety information</string>
 
 <string name="settings_safetylegal_activity_unreachable">You don\'t have a data connection. To view this information now, go to %s from any computer connected to the Internet.</string>
 
 <string name="settings_safetylegal_activity_loading">Loading\u2026</string>

<string name="lockpassword_choose_your_password_header">Choose your password</string>
 
 <string name="lockpassword_choose_your_pattern_header">Choose your pattern</string>
 
 <string name="lockpassword_choose_your_pin_header">Choose your PIN</string>
 
 <string name="lockpassword_confirm_your_password_header">Confirm your password</string>
 
 <string name="lockpassword_confirm_your_pattern_header">Confirm your pattern</string>
 
 <string name="lockpassword_confirm_your_pin_header">Confirm your PIN</string>
 
 <string name="lockpassword_confirm_passwords_dont_match">Passwords don\'t match</string>
 
 <string name="lockpassword_confirm_pins_dont_match">PINs don\'t match</string>
 
 <string name="lockpassword_choose_lock_generic_header">Unlock selection</string>
 
 <string name="lockpassword_password_set_toast">Password has been set</string>
 
 <string name="lockpassword_pin_set_toast">PIN has been set</string>
 
 <string name="lockpassword_pattern_set_toast">Pattern has been set</string>

<string name="lock_settings_title">Screen security</string>
 
 <string name="lockpattern_change_lock_pattern_label">Change unlock pattern</string>
 
 <string name="lockpattern_change_lock_pin_label">Change unlock PIN</string>
 
 <string name="lockpattern_need_to_unlock">Confirm saved pattern</string>
 
 <string name="lockpattern_need_to_unlock_footer" />
 
 <string name="lockpattern_need_to_unlock_wrong">Try again:</string>
 
 <string name="lockpattern_need_to_unlock_wrong_footer" />
 
 <string name="lockpattern_recording_intro_header">Draw an unlock pattern</string>
 
 <string name="lockpattern_recording_intro_footer">Press Menu for help.</string>
 
 <string name="lockpattern_recording_inprogress">Release finger when done.</string>
 
 <string name="lockpattern_recording_incorrect_too_short">Connect at least <xliff:g id="number">%d</xliff:g> dots. Try again:</string>
 
 <string name="lockpattern_pattern_entered_header">Pattern recorded!</string>
 
 <string name="lockpattern_need_to_confirm">Draw pattern again to confirm:</string>
 <string name="lockpattern_pattern_confirmed_header">Your new unlock pattern:</string>
 
 <string name="lockpattern_confirm_button_text">Confirm</string>
 
 <string name="lockpattern_restart_button_text">Redraw</string>
 
 <string name="lockpattern_retry_button_text">Retry</string>
 
 <string name="lockpattern_continue_button_text">Continue</string>
 
 <string name="lockpattern_settings_title">Unlock pattern</string>
 
 <string name="lockpattern_settings_enable_title">Require pattern</string>
 
 <string name="lockpattern_settings_enable_summary">Must draw pattern to unlock screen</string>
 
 <string name="lockpattern_settings_enable_visible_pattern_title">Make pattern visible</string>
 
 <string name="lockpattern_settings_enable_tactile_feedback_title">Vibrate on touch</string>
 
 <string name="lockpattern_settings_choose_lock_pattern">Set unlock pattern</string>
 
 <string name="lockpattern_settings_change_lock_pattern">Change unlock pattern</string>
 
 <string name="lockpattern_settings_help_how_to_record">How to draw an unlock pattern</string>
 
 <string name="lockpattern_too_many_failed_confirmation_attempts_header">Too many incorrect attempts!</string>
 
 <string name="lockpattern_too_many_failed_confirmation_attempts_footer">Try again in <xliff:g id="number">%d</xliff:g> seconds.</string>

<skip />
 
 <string name="skip_button_label">Cancel</string>
 
 <string name="next_button_label">Next</string>
 
 <string name="lock_title" product="tablet">Securing your tablet</string>
 
 <string name="lock_title" product="default">Securing your phone</string>
 
 <string name="lock_intro_message" product="tablet">Protect your tablet from unauthorized use by creating a personal screen unlock pattern. Slide your finger to connect the dots in any order on the next screen. You must connect at least four dots.
 \n\nReady to start? Touch Next.
 </string>
 
 <string name="lock_intro_message" product="default">Protect your phone from unauthorized use by creating a personal screen unlock pattern. Slide your finger to connect at least four dots in any order on the next screen.
 \n\nReady to start? Touch Next.
 </string>

<skip />
 
 <string name="manageapplications_settings_title">Manage apps</string>
 
 <string name="manageapplications_settings_summary">Manage and remove installed apps</string>
 
 <string name="applications_settings">Apps</string>
 
 <string name="applications_settings_summary">Manage apps, set up quick launch shortcuts</string>
 
 <string name="applications_settings_header">App settings</string>
 
 <string name="install_applications">Unknown sources</string>
 
 <string name="install_unknown_applications">Allow installation of non-Market apps</string>
 
 <string name="install_all_warning" product="tablet">Your tablet and personal data are more vulnerable to attack by apps
 from unknown sources. You agree that you are solely responsible for any
 damage to your tablet or loss of data that may result from using
 these apps.</string>
 
 <string name="install_all_warning" product="default">Your phone and personal data are more vulnerable to attack by apps
 from unknown sources. You agree that you are solely responsible for any
 damage to your phone or loss of data that may result from using
 these apps.</string>
 
 <string name="advanced_settings">Advanced settings</string>
 
 <string name="advanced_settings_summary">Enable more settings options</string>
 
 <string name="application_info_label">App info</string>
 
 <string name="storage_label">Storage</string>
 
 <string name="auto_launch_label">Launch by default</string>
 
 <string name="screen_compatibility_label">Screen compatibility</string>
 
 <string name="permissions_label">Permissions</string>
 
 <string name="cache_header_label">Cache</string>
 
 <string name="clear_cache_btn_text">Clear cache</string>
 
 <string name="cache_size_label">Cache</string>
 
 <string name="controls_label">Controls</string>
 
 <string name="force_stop">Force stop</string>
 
 <string name="total_size_label">Total</string>
 
 <string name="application_size_label">App</string>
 
 <string name="external_code_size_label">USB storage app</string>
 
 <string name="data_size_label">Data</string>
 
 <string name="external_data_size_label" product="nosdcard">USB storage data</string>
 
 <string name="external_data_size_label" product="default">SD card</string>
 
 <string name="uninstall_text">Uninstall</string>
 
 <string name="disable_text">Disable</string>
 
 <string name="enable_text">Enable</string>
 
 <string name="clear_user_data_text">Clear data</string>
 
 <string name="app_factory_reset">Uninstall updates</string>
 
 <string name="auto_launch_enable_text">You\'ve chosen to launch this app by default for some actions.</string>
 
 <string name="auto_launch_disable_text">No defaults set.</string>
 
 <string name="clear_activities">Clear defaults</string>
 
 <string name="screen_compatibility_text">This app may not be designed for your screen. You can control how it
 adjusts to your screen here.</string>
 
 <string name="ask_compatibility">Ask when launched</string>
 
 <string name="enable_compatibility">Scale app</string>
 
 <string name="unknown">Unknown</string>
 
 <string name="sort_order_alpha">Sort by name</string>
 
 <string name="sort_order_size">Sort by size</string>
 
 <string name="show_running_services">Show running services</string>
 
 <string name="show_background_processes">Show cached processes</string>
 
 <string name="manage_space_text">Manage space</string>
 
 <string name="filter">Filter</string>
 
 <string name="filter_dlg_title">Choose filter options</string>
 
 <string name="filter_apps_all">All</string>
 
 <string name="filter_apps_third_party">Downloaded</string>
 
 <string name="filter_apps_running">Running</string>
 
 <string name="filter_apps_onsdcard" product="nosdcard">USB storage</string>
 
 <string name="filter_apps_onsdcard" product="default">On SD card</string>
 
 <string name="disabled">Disabled</string>
 
 <string name="no_applications">No apps.</string>
 
 <string name="internal_storage">Internal storage</string>
 
 <string name="sd_card_storage" product="nosdcard">USB storage</string>
 
 <string name="sd_card_storage" product="default">SD card storage</string>
 
 <string name="recompute_size">Recomputing size\u2026</string>
 
 <string name="clear_data_dlg_title">Delete app data?</string>
 
 <string name="clear_data_dlg_text">All this app\'s data will be deleted permanently. This includes all files, settings, accounts, databases, etc.</string>
 
 <string name="dlg_ok">OK</string>
 
 <string name="dlg_cancel">Cancel</string>
 
 <string name="app_not_found_dlg_title"></string>
 
 <string name="app_not_found_dlg_text"> The app wasn\'t
found in the list of installed apps.</string>
 
 <string name="clear_data_failed">Couldn\'t clear app data.</string>
 
 <string name="app_factory_reset_dlg_title">Uninstall updates?</string>
 
 <string name="app_factory_reset_dlg_text">All updates to this Android system app will be uninstalled.</string>
 
 <string name="clear_failed_dlg_title">Clear data</string>
 
 <string name="clear_failed_dlg_text">Couldn\'t clear data for app.</string>
 
 <string name="security_settings_desc" product="tablet">This app can access the following on your tablet:</string>
 
 <string name="security_settings_desc" product="default">This app can access the following on your phone:</string>
 <string name="computing_size">Computing\u2026</string>
 <string name="invalid_size_value">Unable to compute package size</string>
 
 <string name="empty_list_msg">You don\'t have any third-party apps installed.</string>
 
 <string name="version_text">version <xliff:g id="version_num">%1$s</xliff:g></string>
 
 <string name="move_app">Move</string>
 
 <string name="move_app_to_internal" product="tablet">Move to tablet</string>
 
 <string name="move_app_to_internal" product="default">Move to phone</string>
 
 <string name="move_app_to_sdcard" product="nosdcard">Move to USB storage</string>
 
 <string name="move_app_to_sdcard" product="default">Move to SD card</string>
 
 
 <string name="moving">Moving</string>

<string name="insufficient_storage">Not enough storage space.</string>
 <string name="does_not_exist">App doesn\'t exist.</string>
 <string name="app_forward_locked">App is copy-protected.</string>
 <string name="invalid_location">Install location isn\'t valid.</string>
 <string name="system_package">System updates can\'t be installed on external media.</string>

<string name="force_stop_dlg_title">Force stop?</string>
 
 <string name="force_stop_dlg_text">If you force stop an app, it may misbehave.</string>
 
 <string name="move_app_failed_dlg_title"></string>
 
 <string name="move_app_failed_dlg_text">Couldn\'t move app. <xliff:g id="reason">%1$s</xliff:g></string>
 
 <string name="app_install_location_title">Preferred install location</string>
 
 <string name="app_install_location_summary">Change the preferred installation location for new apps</string>
 
 <string name="app_disable_dlg_title">Disable built-in app?</string>
 
 <string name="app_disable_dlg_text">If you disable a built-in app, other apps
 may misbehave.</string>

<string name="storageuse_settings_title">Storage use</string>
 
 <string name="storageuse_settings_summary">View storage used by apps</string>

<string name="runningservices_settings_title">Running services</string>
 
 <string name="runningservices_settings_summary">View and control currently running services</string>
 
 <string name="service_restarting">Restarting</string>
 
 <string name="cached">Cached background process</string>
 
 <string name="no_running_services">Nothing running.</string>
 
 <string name="service_started_by_app">Started by app.</string>
 
 <string name="service_client_name"><xliff:g id="client_name">%1$s</xliff:g></string>
 
 <string name="service_background_processes"><xliff:g id="memory">%1$s</xliff:g> free</string>
 
 <string name="service_foreground_processes"><xliff:g id="memory">%1$s</xliff:g> used</string>
 
 <string name="memory">RAM</string>
 
 <string name="service_process_name"><xliff:g id="process">%1$s</xliff:g></string>
 
 <string name="running_processes_item_description_s_s"><xliff:g id="numprocess">%1$d</xliff:g>
 process and <xliff:g id="numservices">%2$d</xliff:g> service</string>
 
 <string name="running_processes_item_description_s_p"><xliff:g id="numprocess">%1$d</xliff:g>
 process and <xliff:g id="numservices">%2$d</xliff:g> services</string>
 
 <string name="running_processes_item_description_p_s"><xliff:g id="numprocess">%1$d</xliff:g>
 processes and <xliff:g id="numservices">%2$d</xliff:g> service</string>
 
 <string name="running_processes_item_description_p_p"><xliff:g id="numprocess">%1$d</xliff:g>
 processes and <xliff:g id="numservices">%2$d</xliff:g> services</string>

<string name="runningservicedetails_settings_title">Running app</string>
 
 <string name="no_services">Not active</string>
 
 <string name="runningservicedetails_services_title">Services</string>
 
 <string name="runningservicedetails_processes_title">Processes</string>
 
 <string name="service_stop">Stop</string>
 
 <string name="service_manage">Settings</string>
 
 <string name="service_stop_description">This service was started by its
 app. Stopping it may cause the app to fail.</string>
 
 <string name="heavy_weight_stop_description">This app can\'t safely
 be stopped. If you stop it, you may lose some of your current work.</string>
 
 <string name="background_process_stop_description">This is an old app
 process that is still running in case it\'s needed again.
 There is usually no reason to stop it.</string>
 
 <string name="service_manage_description"><xliff:g id="client_name">%1$s</xliff:g>:
 currently in use. Touch Settings to control it.</string>
 
 <string name="main_running_process_description">Main process in use.</string>
 
 <string name="process_service_in_use_description">Service <xliff:g id="comp_name">%1$s</xliff:g>
 is in use.</string>
 
 <string name="process_provider_in_use_description">Provider <xliff:g id="comp_name">%1$s</xliff:g>
 is in use.</string>
 
 <string name="runningservicedetails_stop_dlg_title">Stop system service?</string>
 
 <string name="runningservicedetails_stop_dlg_text" product="tablet">If you stop this service, some
 features of your tablet may stop working correctly until you power it off
 and then on again.</string>
 
 <string name="runningservicedetails_stop_dlg_text" product="default">If you stop this service, some
 features of your phone may stop working correctly until you power it off
 and then on again.</string>

<skip />
 
 <string name="language_settings">Language & input</string>
 
 <string name="language_keyboard_settings_title">Language & input</string>
 
 <string name="language_settings_category">Language settings</string>
 
 <string name="keyboard_settings_category">Keyboard & input methods</string>
 
 <string name="phone_language">Language</string>
 
 <string name="phone_language_summary">""</string>
 
 <string name="auto_replace">Auto-replace</string>
 
 <string name="auto_replace_summary">Correct mistyped words</string>
 
 <string name="auto_caps">Auto-capitalization</string>
 
 <string name="auto_caps_summary">Capitalize first letter in sentences</string>
 
 <string name="auto_punctuate">Auto-punctuate</string>
 
 <string name="hardkeyboard_category">Physical keyboard settings</string>
 
 <string name="auto_punctuate_summary">Press Space key twice to insert \u0022.\u0022</string>
 
 <string name="show_password">Make passwords visible</string>
 
 <string name="show_password_summary"></string>
 
 <string name="ime_security_warning">This input method may be able to collect
 all the text you type, including personal data like passwords and credit
 card numbers. It comes from the app
 <xliff:g id="ime_application_name">%1$s</xliff:g>.
 Use this input method?</string>
 
 <string name="spellchecker_security_warning">This spell checker may be able to collect
 all the text you type, including personal data like passwords and credit
 card numbers. It comes from the app
 <xliff:g id="spellchecker_application_name">%1$s</xliff:g>.
 Use this spell checker?</string>
 
 <string name="pointer_settings_category">Mouse/trackpad</string>
 
 <string name="pointer_speed">Pointer speed</string>

<skip />
 
 <string name="user_dict_settings_titlebar">User dictionary</string>
 
 <string name="user_dict_single_settings_title">Personal dictionary</string>
 
 <string name="user_dict_multiple_settings_title">Personal dictionaries</string>
 
 <string name="user_dict_settings_summary">""</string>
 
 <string name="user_dict_settings_add_menu_title">Add</string>
 
 <string name="user_dict_settings_add_dialog_title">Add to dictionary</string>
 
 <string name="user_dict_settings_edit_dialog_title">Edit word</string>
 
 <string name="user_dict_settings_context_menu_edit_title">Edit</string>
 
 <string name="user_dict_settings_context_menu_delete_title">Delete</string>
 
 <string name="user_dict_settings_empty_text">You don\'t have any words in the user dictionary. Add a word by touching the Add (+) button.</string>
 
 <string name="user_dict_settings_all_languages">All languages</string>

<string name="testing">Testing</string>
 
 <string name="testing_phone_info" product="tablet">Tablet information</string>
 
 <string name="testing_phone_info" product="default">Phone information</string>
 
 <string name="testing_battery_info">Battery information</string>
 
 <string name="testing_sim_toolkit">SIM toolkit</string>

<string name="quick_launch_title">Quick launch</string>
 
 <string name="quick_launch_summary">Set keyboard shortcuts to launch apps</string>
 
 <string name="quick_launch_assign_application">Assign app</string>
 
 <string name="quick_launch_no_shortcut">No shortcut</string>
 
 <string name="quick_launch_shortcut">Search + <xliff:g id="shortcut_letter">%1$s</xliff:g></string>
 
 <string name="quick_launch_clear_dialog_title">Clear</string>
 
 <string name="quick_launch_clear_dialog_message">Your shortcut for <xliff:g id="shortcut_letter">%1$s</xliff:g> (<xliff:g id="application_name">%2$s</xliff:g>) will be cleared.</string>
 
 <string name="quick_launch_clear_ok_button">OK</string>
 
 <string name="quick_launch_clear_cancel_button">Cancel</string>
 
 <string name="quick_launch_display_mode_applications">Apps</string>
 
 <string name="quick_launch_display_mode_shortcuts">Shortcuts</string>

<string name="input_methods_settings_title">Text input</string>
 
 <string name="input_method">Input method</string>
 
 <string name="current_input_method">Default</string>
 
 <string name="input_method_selector">Input method selector</string>
 
 <string name="input_method_selector_show_automatically_title">Automatic</string>
 
 <string name="input_method_selector_always_show_title">Always show</string>
 
 <string name="input_method_selector_always_hide_title">Always hide</string>
 
 <string name="configure_input_method">Set up input methods</string>
 
 <string name="input_method_settings">Settings</string>
 
 <string name="input_method_settings_button">Settings</string>
 
 <string name="active_input_method_subtypes">Active input methods</string>
 
 <string name="use_system_language_to_select_input_method_subtypes">Use system language</string>
 
 <string name="input_methods_settings_label_format"><xliff:g id="ime_name">%1$s</xliff:g> settings</string>
 
 <string name="input_methods_and_subtype_enabler_title">Choose active input methods</string>
 
 <string name="onscreen_keyboard_settings_summary">Onscreen keyboard settings</string>
 
 <string name="builtin_keyboard_settings_title">Physical keyboard</string>
 
 <string name="builtin_keyboard_settings_summary">Physical keyboard settings</string>

<string name="development_settings_title">Developer options</string>
 
 <string name="development_settings_summary">Set options for app development</string>
 
 <string name="enable_adb">USB debugging</string>
 
 <string name="enable_adb_summary">Debug mode when USB is connected</string>
 
 <string name="verifier_device_identifier">Development device ID</string>
 
 <string name="verifier_device_identifier_not_available">Device information not available</string>
 
 <string name="keep_screen_on">Stay awake</string>
 
 <string name="keep_screen_on_summary">Screen will never sleep while charging</string>
 
 <string name="allow_mock_location">Allow mock locations</string>
 
 <string name="allow_mock_location_summary">Allow mock locations</string>
 
 <string name="adb_warning_title">Allow USB debugging?</string>
 
 <string name="adb_warning_message">USB debugging is intended for development purposes only. Use it to copy data between your computer and your device, install apps on your device without notification, and read log data.</string>

<string name="gadget_picker_title">Choose gadget</string>

<string name="widget_picker_title">Choose widget</string>

<string name="battery_history_days"><xliff:g id="days">%1$d</xliff:g>d <xliff:g id="hours">%2$d</xliff:g>h <xliff:g id="minutes">%3$d</xliff:g>m <xliff:g id="seconds">%4$d</xliff:g>s</string>

<string name="battery_history_hours"><xliff:g id="hours">%1$d</xliff:g>h <xliff:g id="minutes">%2$d</xliff:g>m <xliff:g id="seconds">%3$d</xliff:g>s</string>

<string name="battery_history_minutes"><xliff:g id="minutes">%1$d</xliff:g>m <xliff:g id="seconds">%2$d</xliff:g>s</string>

<string name="battery_history_seconds"><xliff:g id="seconds">%1$d</xliff:g>s</string>

<string name="usage_stats_label">Usage statistics</string>

<string name="testing_usage_stats">Usage statistics</string>
 
 <string name="display_order_text">Sort by:</string>
 
 <string name="app_name_label">App</string>
 
 <string name="launch_count_label">Count</string>
 
 <string name="usage_time_label">Usage time</string>

<skip />

<string name="accessibility_settings">Accessibility</string>
 
 <string name="accessibility_settings_title">Accessibility settings</string>

<string name="accessibility_services_title">Services</string>

<string name="accessibility_system_title">System</string>
 
 <string name="accessibility_toggle_large_text_title">Large text</string>
 
 <string name="accessibility_power_button_ends_call_title">Power button ends call</string>
 
 <string name="accessibility_touch_exploration_title">Explore by touch</string>
 
 <string name="accessibility_touch_exploration_summary" >When Explore by Touch is turned on,
 you can hear or see descriptions of what\'s under your finger.\n\n This feature is for low-vision users.</string>
 
 <string name="accessibility_long_press_timeout_title">Touch & hold delay</string>
 
 <string name="accessibility_script_injection_title">Install web scripts</string>

<string name="accessibility_menu_item_settings">Settings</string>
 
 <string name="accessibility_menu_item_tutorial">Tutorial</string>

<string name="accessibility_service_state_on">On</string>
 
 <string name="accessibility_service_state_off">Off</string>

<string name="accessibility_script_injection_allowed">Allowed</string>
 
 <string name="accessibility_script_injection_disallowed">Not allowed</string>

<string name="accessibility_script_injection_button_allow">Allow</string>
 
 <string name="accessibility_script_injection_button_disallow">Don\'t allow</string>

<string name="accessibility_service_security_warning_title">Use
 <xliff:g id="service" example="TalkBack">%1$s</xliff:g>?</string>
 
 <string name="accessibility_service_security_warning_summary" product="tablet">
 <xliff:g id="accessibility_service_name">%1$s</xliff:g> can
 collect all of the text you type, except passwords. This includes personal data such as credit card
 numbers. It can also collect data about your interactions with the tablet.</string>
 
 <string name="accessibility_service_security_warning_summary" product="default">
 <xliff:g id="accessibility_service_name">%1$s</xliff:g> can
 collect all of the text you type, except passwords. This includes personal data such as credit card
 numbers. It can also collect data about your interactions with the phone.</string>

<string name="accessibility_service_disable_warning_title">Stop
 <xliff:g id="service" example="TalkBack">%1$s</xliff:g>?</string>
 
 <string name="accessibility_service_disable_warning_summary">Touching OK will
 stop <xliff:g id="service" example="TalkBack">%1$s</xliff:g>.</string>

<string name="accessibility_no_services_installed">No services installed</string>

<string name="accessibility_service_no_apps_title">Need a screen reader?</string>
 
 <string name="accessibility_service_no_apps_message">TalkBack provides spoken feedback to
 help blind and low-vision users. Do you want to install it for free from Android
 Market?</string>

<string name="accessibility_script_injection_security_warning_title">Install web scripts?</string>
 
 <string name="accessibility_script_injection_security_warning_summary">Do you want apps to
 install scripts from Google that make their web content more accessible?</string>

<string name="accessibility_touch_exploration_warning">This feature changes the
 way your device responds to touch. Turn on?</string>
 
 <string name="accessibility_service_default_description">No description provided.</string>

<string name="settings_button">Settings</string>

<skip />

<string name="power_usage_summary_title">Battery</string>
 
 <string name="power_usage_summary">What has been using the battery</string>
 
 <string name="power_usage_not_available">Battery usage data not available</string>
 
 <string name="power_usage_level_and_status"><xliff:g id="level">%1$s</xliff:g> - <xliff:g id="status">%2$s</xliff:g></string>
 
 <string name="battery_since_unplugged">Battery use since unplugged</string>
 
 <string name="battery_since_reset">Battery use since reset</string>
 
 <string name="battery_stats_on_battery"><xliff:g id="time">%1$s</xliff:g> on battery</string>
 
 <string name="battery_stats_duration"><xliff:g id="time">%1$s</xliff:g> since unplugged</string>
 
 <string name="battery_stats_charging_label">Charging</string>
 
 <string name="battery_stats_screen_on_label">Screen on</string>
 
 <string name="battery_stats_gps_on_label">GPS on</string>
 
 <string name="battery_stats_wifi_running_label">WiFi</string>
 
 <string name="battery_stats_wake_lock_label">Awake</string>
 
 <string name="battery_stats_phone_signal_label">Mobile network signal</string>
 
 <string name="battery_stats_last_duration">@string/menu_stats_last_unplugged</string>
 
 <string name="awake">Device awake time</string>
 
 <string name="wifi_on_time">WiFi on time</string>
 
 <string name="bluetooth_on_time">WiFi on time</string>
 
 <string name="usage_name_percent"><xliff:g id="name">%1$s</xliff:g>" - "
 <xliff:g id="number" example="30">%2$s</xliff:g><xliff:g id="percent" example="%">%%</xliff:g></string>

<string name="history_details_title">History details</string>

<string name="details_title">Use details</string>
 
 <string name="details_subtitle">Use details</string>
 
 <string name="controls_subtitle">Adjust power use</string>
 
 <string name="packages_subtitle">Included packages</string>

<string name="power_screen">Screen</string>
 
 <string name="power_wifi">WiFi</string>
 
 <string name="power_bluetooth">Bluetooth</string>
 
 <string name="power_cell">Cell standby</string>
 
 <string name="power_phone">Voice calls</string>
 
 <string name="power_idle" product="tablet">Tablet idle</string>
 
 <string name="power_idle" product="default">Phone idle</string>

<string name="usage_type_cpu">CPU total</string>
 
 <string name="usage_type_cpu_foreground">CPU foreground</string>
 
 <string name="usage_type_wake_lock">Keep awake</string>
 
 <string name="usage_type_gps">GPS</string>
 
 <string name="usage_type_wifi_running">WiFi running</string>
 
 <string name="usage_type_phone" product="tablet">Tablet</string>
 
 <string name="usage_type_phone" product="default">Phone</string>
 
 <string name="usage_type_data_send">Data sent</string>
 
 <string name="usage_type_data_recv">Data received</string>
 
 <string name="usage_type_audio">Audio</string>
 
 <string name="usage_type_video">Video</string>
 
 <string name="usage_type_on_time">Time on</string>
 
 <string name="usage_type_no_coverage">Time without a signal</string>
 
 <string name="battery_action_stop">Force stop</string>
 
 <string name="battery_action_app_details">App info</string>
 
 <string name="battery_action_app_settings">App settings</string>
 
 <string name="battery_action_display">Screen settings</string>
 
 <string name="battery_action_wifi">WiFi settings</string>
 
 <string name="battery_action_bluetooth">Bluetooth settings</string>

<string name="battery_desc_voice">Battery used by voice calls</string>

<string name="battery_desc_standby" product="tablet">Battery used when tablet is idle</string>
 
 <string name="battery_desc_standby" product="default">Battery used when phone is idle</string>

<string name="battery_desc_radio">Battery used by cell radio</string>
 
 <string name="battery_sugg_radio">Switch to airplane mode to save power in areas with no cell coverage</string>

<string name="battery_desc_display">Battery used by the display and backlight</string>
 
 <string name="battery_sugg_display">Reduce the screen brightness and/or screen timeout</string>

<string name="battery_desc_wifi">Battery used by WiFi</string>
 
 <string name="battery_sugg_wifi">Turn off WiFi when not using it or when it isn\'t available</string>

<string name="battery_desc_bluetooth">Battery used by Bluetooth</string>
 
 <string name="battery_sugg_bluetooth_basic">Turn off Bluetooth when you aren\'t using it</string>
 
 <string name="battery_sugg_bluetooth_headset">Try connecting to a different Bluetooth device</string>

<string name="battery_desc_apps">Battery used by app</string>
 
 <string name="battery_sugg_apps_info">Stop or uninstall the app</string>
 
 <string name="battery_sugg_apps_gps">"Manually control GPS to prevent app from using it"</string>
 
 <string name="battery_sugg_apps_settings">The app may offer settings to reduce battery use</string>

<string name="menu_stats_unplugged"><xliff:g id="unplugged">%1$s</xliff:g> since unplugged</string>
 
 <string name="menu_stats_last_unplugged">While last unplugged for <xliff:g id="unplugged">%1$s</xliff:g></string>
 
 <string name="menu_stats_total">Usage totals</string>
 
 <string name="menu_stats_refresh">Refresh</string>

<string name="process_kernel_label">Android OS</string>
 
 <string name="process_mediaserver_label">Mediaserver</string>

<skip />
 
 <string name="voice_input_output_settings">Voice input & output</string>
 
 <string name="voice_input_output_settings_title">Voice input & output settings</string>
 
 <string name="voice_search_settings_title">Voice search</string>
 
 <string name="keyboard_settings_title">Android keyboard</string>
 
 <string name="voice_category">Speech</string>
 
 <string name="recognizer_title">Voice recognizer</string>
 
 <string name="recognizer_settings_title">Voice Search</string>
 
 <string name="recognizer_settings_summary">Settings for \'<xliff:g id="recognizer_name">%s</xliff:g>\'</string>

<skip />
 
 <string name="tts_settings">Text-to-speech settings</string>
 
 <string name="tts_settings_title">Text-to-speech output</string>
 
 <string name="use_default_tts_settings_title">Always use my settings</string>
 
 <string name="use_default_tts_settings_summary">Default settings below override app settings</string>
 
 <string name="tts_default_settings_section">Default settings</string>
 
 <string name="tts_default_synth_title">Default engine</string>
 
 <string name="tts_default_synth_summary">Sets the speech synthesis engine to be used for spoken text</string>
 
 <string name="tts_default_rate_title">Speech rate</string>
 
 <string name="tts_default_rate_summary">Speed at which the text is spoken</string>
 
 <string name="tts_default_pitch_title">Pitch</string>
 
 <string name="tts_default_pitch_summary">Affects the tone of the spoken text</string>
 
 <string name="tts_default_lang_title">Language</string>
 
 <string name="tts_default_lang_summary">Sets the language-specific voice for the spoken text</string>
 
 <string name="tts_play_example_title">Listen to an example</string>
 
 <string name="tts_play_example_summary">Play a short demonstration of speech synthesis</string>
 
 <string name="tts_install_data_title">Install voice data</string>
 
 <string name="tts_install_data_summary">Install the voice data required for speech synthesis</string>
 
 <string name="tts_data_installed_summary">Voices required for speech synthesis already properly installed</string>
 
 <string name="tts_settings_changed_demo">Your settings have changed. This is an example of how they sound.</string>
 
 <string name="tts_engine_error">The engine you selected is unable to run</string>
 
 <string name="tts_engine_error_config">Configure</string>
 
 <string name="tts_engine_error_reselect">Choose another engine</string>
 
 <string name="tts_engine_security_warning">This speech synthesis engine may be able to collect
 all the text that will be spoken, including personal data like passwords and credit
 card numbers. It comes from the <xliff:g id="tts_plugin_engine_name">%s</xliff:g> engine.
 Enable the use of this speech synthesis engine?</string>
 
 <string name="tts_engines_section">Engines</string>
 
 <string name="tts_engine_name_settings"><xliff:g id="tts_plugin_engine_name">%s</xliff:g> settings</string>
 
 <string name="tts_engine_name_is_enabled_summary"><xliff:g id="tts_plugin_engine_name">%s</xliff:g> is enabled</string>
 
 <string name="tts_engine_name_is_disabled_summary"><xliff:g id="tts_plugin_engine_name">%s</xliff:g> is disabled</string>
 
 <string name="tts_engine_settings_section">Engine settings</string>
 
 <string name="tts_engine_settings_title">Settings for <xliff:g id="tts_engine_name">%s</xliff:g></string>
 
 <string name="pico_languages_and_voices">Languages and voices</string>
 
 <string name="pico_installed">Installed</string>
 
 <string name="pico_not_installed">Not installed</string>
 
 <string name="pico_voice_summary_female">Female</string>
 
 <string name="pico_voice_summary_male">Male</string>
 
 <string name="tts_notif_engine_install_title">Speech synthesis engine installed</string>
 
 <string name="tts_notif_engine_install_message">Enable new engine before use</string>
 
 <string name="tts_engine_settings_button">Launch engine settings</string>
 
 <string name="tts_engine_preference_section_title">Preferred engine</string>
 
 <string name="tts_general_section_title">General</string>

<string name="gadget_title">Power control</string>
 <string name="gadget_toggle_wifi">Updating WiFi setting</string>
 <string name="gadget_toggle_bluetooth">Updating Bluetooth setting</string>

<string name="vpn_settings_title">VPN</string>

<string name="credentials_title">Credential storage</string>
 
 <string name="credentials_install" product="nosdcard">Install from storage</string>
 
 <string name="credentials_install" product="default">Install from SD card</string>
 
 <string name="credentials_install_summary" product="nosdcard">Install certificates from storage</string>
 
 <string name="credentials_install_summary" product="default">Install certificates from SD card</string>
 
 <string name="credentials_reset">Clear credentials</string>
 
 <string name="credentials_reset_summary">Remove all certificates</string>
 
 <string name="trusted_credentials">Trusted credentials</string>
 
 <string name="trusted_credentials_summary">Display trusted CA certificates</string>

<string name="credentials_unlock"></string>
 
 <string name="credentials_unlock_hint">Type the password for credential storage.</string>
 
 <string name="credentials_old_password">Current password:</string>
 
 <string name="credentials_reset_hint">Remove all the contents?</string>
 <string name="credentials_password_too_short">The password must have at least 8 characters.</string>
 
 <string name="credentials_wrong_password">Incorrect password.</string>
 
 <string name="credentials_reset_warning">Incorrect password. You have one more chance before credential storage is erased.</string>
 
 <string name="credentials_reset_warning_plural">Incorrect password. You have <xliff:g id="number" example="5">%1$d</xliff:g> more chances before credential storage is erased.</string>
 
 <string name="credentials_erased">Credential storage is erased.</string>
 
 <string name="credentials_not_erased">Credential storage couldn\'t be erased.</string>
 
 <string name="credentials_enabled">Credential storage is enabled.</string>
 
 <string name="credentials_configure_lock_screen_hint">You must set a lock screen PIN or password before you can use credential storage.</string>

<string name="emergency_tone_title">Emergency tone</string>
 
 <string name="emergency_tone_summary">Set behavior when an emergency call is placed</string>

<skip />
 
 <string name="privacy_settings">Backup & reset</string>
 
 <string name="privacy_settings_title">Backup & reset</string>
 
 <string name="backup_section_title">Backup & restore</string>
 
 <string name="personal_data_section_title">Personal data</string>
 
 <string name="backup_data_title">Back up my data</string>
 
 <string name="backup_data_summary">Back up app data, WiFi passwords, and other settings to Google servers</string>
 
 <string name="backup_configure_account_title">Backup account</string>
 
 <string name="backup_configure_account_default_summary">No account is currently storing backed up data</string>
 
 <string name="auto_restore_title">Automatic restore</string>
 
 <string name="auto_restore_summary">When reinstalling an app, restore backed up settings and data</string>

<string name="local_backup_password_title">Desktop backup password</string>
 
 <string name="local_backup_password_summary_none">Desktop full backups aren\'t currently protected.</string>
 
 <string name="local_backup_password_summary_change">Select to change or remove the password for desktop full backups</string>

<string name="backup_erase_dialog_title"></string>
 
 <string name="backup_erase_dialog_message">Stop backing up your WiFi passwords, bookmarks, other settings, and app data, plus erase all copies on Google servers?</string>

<skip />
 
 <string name="device_admin_settings_title">Device administration settings</string>
 
 <string name="active_device_admin_msg">Device administrator</string>
 
 <string name="remove_device_admin">Deactivate</string>
 
 <string name="select_device_admin_msg">Device administrators</string>
 
 <string name="no_device_admins">No available device administrators</string>

<string name="add_device_admin_msg">Activate device administrator?</string>
 
 <string name="add_device_admin">Activate</string>
 
 <string name="device_admin_add_title">Device administrator</string>
 
 <string name="device_admin_warning">Activating this administrator will allow
 the app <xliff:g id="app_name">%1$s</xliff:g> to perform the
 following operations:</string>
 
 <string name="device_admin_status">This administrator is active and allows
 the app <xliff:g id="app_name">%1$s</xliff:g> to perform the
 following operations:</string>

<string name="untitled_apn">Untitled</string>

<string name="sound_category_sound_title">General</string>
 <string name="sound_category_calls_and_notification_title">Ringtone & notifications</string>
 <string name="sound_category_notification_title">Notifications</string>
 <string name="sound_category_feedback_title">System</string>

<string name="wifi_setup_title">WiFi setup</string>
 
 <string name="wifi_setup_title_editing_network">Connect to WiFi network <xliff:g id="network_name" example="Happy Mobile">%s</xliff:g></string>
 
 <string name="wifi_setup_title_connecting_network">Connecting to WiFi network <xliff:g id="network_name" example="Happy Mobile">%s</xliff:g>\u2026</string>
 
 <string name="wifi_setup_title_connected_network">Connected to WiFi network <xliff:g id="network_name" example="Happy Mobile">%s</xliff:g></string>
 
 <string name="wifi_setup_title_add_network">Add a network</string>
 
 <string name="wifi_setup_not_connected">Not connected</string>
 
 <string name="wifi_setup_add_network">Add network</string>
 
 <string name="wifi_setup_refresh_list">Refresh list</string>
 
 <string name="wifi_setup_skip">Skip</string>
 
 <string name="wifi_setup_next">Next</string>
 
 <string name="wifi_setup_back">Back</string>
 
 <string name="wifi_setup_detail">Network details</string>
 
 <string name="wifi_setup_connect">Connect</string>
 
 <string name="wifi_setup_forget">Forget</string>
 
 <string name="wifi_setup_save">Save</string>
 
 <string name="wifi_setup_cancel">Cancel</string>

<string name="wifi_setup_status_scanning">Scanning networks\u2026</string>
 
 <string name="wifi_setup_status_select_network">Touch a network to connect to it</string>
 
 <string name="wifi_setup_status_existing_network">Connect to existing network</string>
 
 <string name="wifi_setup_status_unsecured_network">Connect to unsecured network</string>
 
 <string name="wifi_setup_status_edit_network">Type network configuration</string>
 
 <string name="wifi_setup_status_new_network">Connect to new network</string>
 
 <string name="wifi_setup_status_connecting">Connecting\u2026</string>
 
 <string name="wifi_setup_status_proceed_to_next">Go to the next step</string>
 
 <string name="wifi_setup_status_eap_not_supported">EAP isn\'t supported.</string>
 
 <string name="wifi_setup_eap_not_supported">You can\'t configure an EAP WiFi connection during setup. After setup, you can do that in Settings > Wireless & networks.</string>
 
 <string name="wifi_setup_description_connecting">Connecting can take a few minutes\u2026</string>
 
 <string name="wifi_setup_description_connected">Touch Next to continue with setup.\n\nTouch Back to connect to a different WiFi network.</string>

<string name="time_zone_auto_stub" translatable="false">Select Time Zone</string>

<string name="accessibility_sync_enabled">Sync enabled</string>
 
 <string name="accessibility_sync_disabled">Sync disabled</string>
 
 <string name="accessibility_sync_error">Sync error.</string>

<string name="account_sync_settings_title">Sync settings</string>
 
 <string name="sync_is_failing">Sync is currently experiencing problems. It will be back shortly.</string>
 
 <string name="add_account_label">Add account</string>
 
 <string name="background_data">Background data</string>
 
 <string name="background_data_summary">Apps can sync, send, and receive data at any time</string>
 
 <string name="background_data_dialog_title">Disable background data?</string>
 
 <string name="background_data_dialog_message">Disabling background data extends battery life and lowers data use. Some apps may still use the background data connection.</string>
 
 <string name="sync_automatically">Auto-sync app data</string>

<skip />
 
 <string name="sync_enabled">Sync is ON</string>
 
 <string name="sync_disabled">Sync is OFF</string>
 
 <string name="sync_error">Sync error</string>

<string name="settings_backup">Back up settings</string>
 
 <string name="settings_backup_summary">Back up my settings</string>
 
 <string name="sync_menu_sync_now">Sync now</string>
 
 <string name="sync_menu_sync_cancel">Cancel sync</string>
 
 <string name="sync_one_time_sync">Touch to sync now<xliff:g id="last_sync_time">\n%1$s</xliff:g></string>
 
 <string name="sync_gmail">Gmail</string>
 
 <string name="sync_calendar">Calendar</string>
 
 <string name="sync_contacts">Contacts</string>
 
 <string name="sync_plug">Welcome to Google sync!
 \nA Google approach to synchronizing data to allow access to your contacts, appointments, and more from wherever you are.
 </string>

<string name="header_application_sync_settings">App sync settings</string>

<string name="header_data_and_synchronization">Data & synchronization</string>
 
 <string name="preference_change_password_title">Change password</string>
 
 <string name="header_account_settings">Account settings</string>
 
 <string name="remove_account_label">Remove account</string>
 
 <string name="header_add_an_account">Add an account</string>
 
 <string name="finish_button_label">Finish</string>
 
 <string name="really_remove_account_title">Remove account?</string>
 
 <string name="really_remove_account_message" product="tablet">Removing this account will delete all of its messages, contacts, and other data from the tablet!</string>
 
 <string name="really_remove_account_message" product="default">Removing this account will delete all of its messages, contacts, and other data from the phone!</string>
 
 <string name="remove_account_failed" product="tablet">This account is required by some apps. You can only remove it by resetting the tablet to factory defaults (which deletes all your personal data) in Settings > Backup & reset.</string>
 
 <string name="remove_account_failed" product="default">This account is required by some apps. You can only remove it by resetting the phone to factory defaults (which deletes all your personal data) in Settings > Backup & reset.</string>
 
 <string name="provider_label">Push subscriptions</string>
 
 <string name="sync_item_title">Sync <xliff:g id="authority" example="Calendar">%s</xliff:g></string>
 
 <string name="cant_sync_dialog_title">Can\'t manually sync</string>
 
 <string name="cant_sync_dialog_message">Sync for this item is currently disabled. To change this setting, temporarily turn on background data and automatic sync.</string>

<string name="enter_password">Type password to decrypt storage</string>
 
 <string name="try_again">Try again.</string>
 
 <string name="service_busy">The service is busy. Try again.</string>

<string name="delete">Delete</string>
 
 <string name="misc_files">Misc files</string>
 
 <string name="misc_files_selected_count">selected <xliff:g id="number" example="3">%1$d</xliff:g> out of <xliff:g id="total" example="15">%2$d</xliff:g></string>
 
 <string name="misc_files_selected_count_bytes"><xliff:g id="number" example="3.25MB">%1$s</xliff:g> out of <xliff:g id="total" example="15.25MB">%2$s</xliff:g></string>
 
 <string name="select_all">Select all</string>

<string name="hdcp_checking_title">HDCP checking</string>
 
 <string name="hdcp_checking_dialog_title">Set HDCP checking behavior</string>

<string name="debug_ui_category">User interface</string>

<string name="strict_mode">Strict mode enabled</string>
 
 <string name="strict_mode_summary">Flash screen when apps do long operations
 on main thread</string>

<string name="pointer_location">Pointer location</string>
 
 <string name="pointer_location_summary">Screen overlay showing current touch data</string>

<string name="show_touches">Show touches</string>
 
 <string name="show_touches_summary">Show visual feedback for touches</string>

<string name="show_screen_updates">Show screen updates</string>
 
 <string name="show_screen_updates_summary">Flash areas of screen when they update</string>

<string name="show_cpu_usage">Show CPU usage</string>
 
 <string name="show_cpu_usage_summary">Screen overlay showing current CPU usage</string>

<string name="force_hw_ui">Force GPU rendering</string>
 
 <string name="force_hw_ui_summary">Use 2D hardware acceleration in applications</string>

<string name="window_animation_scale_title">Window animation scale</string>

<string name="transition_animation_scale_title">Transition animation scale</string>

<string name="debug_applications_category">Apps</string>

<string name="immediately_destroy_activities">Don\'t keep activities</string>
 
 <string name="immediately_destroy_activities_summary">Destroy every activity as soon as
 the user leaves it</string>

<string name="app_process_limit_title">Background process limit</string>

<string name="show_all_anrs">Show all ANRs</string>
 
 <string name="show_all_anrs_summary">Show App Not Responding dialog
 for background apps</string>

<string name="data_usage_summary_title">Data usage</string>
 
 <string name="data_usage_cycle">Data usage cycle</string>
 
 <string name="data_usage_menu_roaming">Data roaming</string>
 
 <string name="data_usage_menu_restrict_background">Restrict background data</string>
 
 <string name="data_usage_menu_split_4g">Separate 4G usage</string>
 
 <string name="data_usage_menu_show_wifi">Show WiFi usage</string>
 
 <string name="data_usage_menu_show_ethernet">Show Ethernet usage</string>
 
 <string name="data_usage_change_cycle">Change cycle\u2026</string>
 
 <string name="data_usage_pick_cycle_day">Day of month to reset data usage cycle:</string>
 
 <string name="data_usage_empty">No apps used data during this period.</string>
 
 <string name="data_usage_label_foreground">Foreground</string>
 
 <string name="data_usage_label_background">Background</string>

<string name="data_usage_disclaimer" product="tablet">Measured by your tablet. Your carrier\'s data usage accounting may differ.</string>
 
 <string name="data_usage_disclaimer" product="default">Measured by your phone. Your carrier\'s data usage accounting may differ.</string>

<string name="data_usage_disable_mobile">Disable mobile data?</string>
 
 <string name="data_usage_disable_mobile_limit">Set mobile data limit</string>
 
 <string name="data_usage_disable_4g_limit">Set 4G data limit</string>
 
 <string name="data_usage_disable_3g_limit">Set 2G-3G data limit</string>
 
 <string name="data_usage_disable_wifi_limit">Set WiFi data limit</string>

<string name="data_usage_tab_wifi">WiFi</string>
 
 <string name="data_usage_tab_ethernet">Ethernet</string>
 
 <string name="data_usage_tab_mobile">Mobile</string>
 
 <string name="data_usage_tab_4g">4G</string>
 
 <string name="data_usage_tab_3g">2G-3G</string>

<string name="data_usage_list_mobile">mobile</string>
 
 <string name="data_usage_list_none">none</string>

<string name="data_usage_enable_mobile">Mobile data</string>
 
 <string name="data_usage_enable_3g">2G-3G data</string>
 
 <string name="data_usage_enable_4g">4G data</string>

<string name="data_usage_app_settings">View app settings</string>
 
 <string name="data_usage_app_restrict_background">Restrict background data</string>
 
 <string name="data_usage_app_restrict_background_summary">Disable background data on mobile data network only. WiFi will be used if available.</string>
 
 <string name="data_usage_app_restrict_background_summary_disabled">To restrict background data for this app, first set a mobile data limit.</string>
 
 <string name="data_usage_app_restrict_dialog_title">Restrict background data?</string>
 
 <string name="data_usage_app_restrict_dialog">This feature may cause an app that depends on background data to stop working when WiFi isn\'t available.\n\nYou can find more appropriate data usage controls in the settings available within the app.</string>
 
 <string name="data_usage_restrict_denied_dialog">Restricting background data is possible only when you\'ve set a mobile data limit.</string>

<string name="data_usage_cycle_editor_title">Usage cycle reset date</string>
 
 <string name="data_usage_cycle_editor_subtitle">Date of each month:</string>
 
 <string name="data_usage_cycle_editor_positive">Set</string>

<string name="data_usage_warning_editor_title">Set data usage warning</string>
 
 <string name="data_usage_limit_editor_title">Set data usage limit</string>

<string name="data_usage_limit_dialog_title">Limiting data usage</string>
 
 <string name="data_usage_limit_dialog" product="tablet">Your <xliff:g id="networks" example="mobile">%1$s</xliff:g> data connection will be disabled when the specified limit is reached.\n\nSince data usage is measured by your tablet, and your carrier may account for usage differently, consider using a conservative limit.</string>
 
 <string name="data_usage_limit_dialog" product="default">Your <xliff:g id="networks" example="mobile">%1$s</xliff:g> data connection will be disabled when the specified limit is reached.\n\nSince data usage is measured by your phone, and your carrier may account for usage differently, consider using a conservative limit.</string>

<string name="data_usage_restrict_background_title">Restrict background data?</string>
 
 <string name="data_usage_restrict_background">If you restrict background mobile data, some apps and services won\'t work unless you\'re connected to a WiFi network.</string>

<string name="data_usage_sweep_warning"><xliff:g id="number" example="128">^1</xliff:g> <xliff:g id="unit" example="KB">^2</xliff:g>\nwarning</string>
 
 <string name="data_usage_sweep_limit"><xliff:g id="number" example="128">^1</xliff:g> <xliff:g id="unit" example="KB">^2</xliff:g>\nlimit</string>

<string name="data_usage_uninstalled_apps">Removed apps</string>
 
 <string name="data_usage_received_sent"><xliff:g id="received" example="128KB">%1$s</xliff:g> received, <xliff:g id="sent" example="1.3GB">%2$s</xliff:g> sent</string>
 
 <string name="data_usage_total_during_range"><xliff:g id="range" example="Jul 1 - Jul 31">%2$s</xliff:g>: about <xliff:g id="total" example="128KB">%1$s</xliff:g> used</string>

<string name="cryptkeeper_emergency_call">Emergency call</string>
 
 <string name="cryptkeeper_return_to_call">Return to call</string>

<string name="vpn_name">Name</string>
 
 <string name="vpn_type">Type</string>
 
 <string name="vpn_server">Server address</string>
 
 <string name="vpn_mppe">PPP encryption (MPPE)</string>
 
 <string name="vpn_l2tp_secret">L2TP secret</string>
 
 <string name="vpn_ipsec_identifier">IPSec identifier</string>
 
 <string name="vpn_ipsec_secret">IPSec pre-shared key</string>
 
 <string name="vpn_ipsec_user_cert">IPSec user certificate</string>
 
 <string name="vpn_ipsec_ca_cert">IPSec CA certificate</string>
 
 <string name="vpn_show_options">Show advanced options</string>
 
 <string name="vpn_search_domains">DNS search domains</string>
 
 <string name="vpn_dns_servers">DNS servers (e.g. 8.8.8.8)</string>
 
 <string name="vpn_routes">Forwarding routes (e.g. 10.0.0.0/8)</string>
 
 <string name="vpn_username">Username</string>
 
 <string name="vpn_password">Password</string>
 
 <string name="vpn_save_login">Save account information</string>
 
 <string name="vpn_not_used">(not used)</string>
 
 <string name="vpn_no_ca_cert">(don\'t verify server)</string>

<string name="vpn_cancel">Cancel</string>
 
 <string name="vpn_save">Save</string>
 
 <string name="vpn_connect">Connect</string>
 
 <string name="vpn_edit">Edit VPN network</string>
 
 <string name="vpn_connect_to">Connect to <xliff:g id="network" example="School">%s</xliff:g></string>

<string name="vpn_title">VPN</string>
 
 <string name="vpn_create">Add VPN network</string>
 
 <string name="vpn_menu_edit">Edit network</string>
 
 <string name="vpn_menu_delete">Delete network</string>

<string name="trusted_credentials_system_tab">System</string>
 
 <string name="trusted_credentials_user_tab">User</string>
 
 <string name="trusted_credentials_disable_label">Disable</string>
 
 <string name="trusted_credentials_enable_label">Enable</string>
 
 <string name="trusted_credentials_remove_label">Remove</string>
 
 <string name="trusted_credentials_enable_confirmation">Enable the system CA certificate?</string>
 
 <string name="trusted_credentials_disable_confirmation">Disable the system CA certificate?</string>
 
 <string name="trusted_credentials_remove_confirmation">Permanently remove the user CA certificate?</string>

<string name="accessibility_tutorial_title">Accessibility tutorial</string>
 
 <string name="accessibility_tutorial_next">Next</string>
 
 <string name="accessibility_tutorial_back">Back</string>
 
 <string name="accessibility_tutorial_finish">Finish</string>
 
 <string name="accessibility_tutorial_skip">Skip tutorial</string>

<string name="accessibility_tutorial_lesson_1_title">Lesson 1: Exploring the screen</string>
 
 <string name="accessibility_tutorial_lesson_1_text_1">After you turn on Explore by Touch, you can touch the screen to learn what\’s under your finger. For example, the current screen contains app icons. Find one of them by touching the screen and sliding your finger around.</string>
 
 <string name="accessibility_tutorial_lesson_1_text_2_more">Good. Keep sliding your finger around the screen until you find at least one more icon.</string>
 
 <string name="accessibility_tutorial_lesson_1_text_3">To activate something that you\’re touching, tap it. Slide your finger until you find the icon for the <xliff:g id="app_name" example="Browser">%s</xliff:g>. Then tap the icon once to activate it.</string>
 
 <string name="accessibility_tutorial_lesson_1_text_4">Your finger is touching the <xliff:g id="app_name" example="Browser">%s</xliff:g> icon. Tap once to activate the icon.</string>
 
 <string name="accessibility_tutorial_lesson_1_text_4_exited">Your finger moved over the <xliff:g id="app_name" example="Browser">%s</xliff:g> icon, and then moved away. Slowly slide your finger around the screen until you find the Browser icon again.</string>
 
 <string name="accessibility_tutorial_lesson_1_text_5">Good. To move to the next lesson, find and activate the <xliff:g id="next" example="Next">%s</xliff:g> button, located near the bottom-right corner of the screen.</string>

<string name="accessibility_tutorial_lesson_2_title">Lesson 2: Scrolling using two fingers</string>
 
 <string name="accessibility_tutorial_lesson_2_text_1">To scroll through a list, you can slide two fingers along the screen. For example, the current screen contains a list of app names that can scroll up or down. First, try to identify a few items in the list by sliding one finger around.</string>
 
 <string name="accessibility_tutorial_lesson_2_text_2_more">Good. Keep sliding your finger around to find at least one more item.</string>
 
 <string name="accessibility_tutorial_lesson_2_text_3">Now place two fingers on an item in the list and slide both fingers up. If you reach the top of the screen, lift your fingers, place them lower on the list, and continue sliding up.</string>
 
 <string name="accessibility_tutorial_lesson_2_text_3_more">Good. Keep sliding your fingers up to scroll some more.</string>
 
 <string name="accessibility_tutorial_lesson_2_text_4">You have completed the tutorial. To exit, find and touch the <xliff:g id="finish" example="Finish">%s</xliff:g> button.</string>

<string name="spellcheckers_settings_title">Spelling correction</string>

<string name="current_backup_pw_prompt">Type your current full backup password here</string>
 
 <string name="new_backup_pw_prompt">Type a new password for full backups here</string>
 
 <string name="confirm_new_backup_pw_prompt">Retype your new full backup password here</string>

<string name="backup_pw_set_button_text">Set backup password</string>
 
 <string name="backup_pw_cancel_button_text">Cancel</string>

<string name="percentage"><xliff:g id="number" example="30">%d</xliff:g>%%</string>

</resources>

Xml文件 | 3771行 | 289.74 KB

<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2007 The Android Open Source Project

     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at

          http://www.apache.org/licenses/LICENSE-2.0

     Unless required by applicable law or agreed to in writing, software
     distributed under the License is distributed on an "AS IS" BASIS,
     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
     See the License for the specific language governing permissions and
     limitations under the License.
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
    <!-- Strings for Dialog yes button -->
    <string name="yes">"Yes"</string>

    <!-- Strings for Dialog no button -->
    <string name="no">"No"</string>

    <!-- Device Info --> <skip />
    <!-- Device Info screen. Used for a status item's value when the proper value is not known -->
    <string name="device_info_default">Unknown</string>

    <!-- Category headings in left-pane header menu --> <skip />
    <!-- Settings main menu category heading. Wireless and networks (Wi-Fi, Bluetooth, data usage...). [CHAR LIMIT=40] -->
    <string name="header_category_wireless_networks">WIRELESS &amp; NETWORKS</string>
    <!-- Settings main menu category heading. Device (Sound, display, battery, applications...). [CHAR LIMIT=40] -->
    <string name="header_category_device">DEVICE</string>
    <!-- Settings main menu category heading. Personal (Accounts, security, language, backup...). [CHAR LIMIT=40] -->
    <string name="header_category_personal">PERSONAL</string>
    <!-- Settings main menu category heading. System (Updates, data, accessibility, about phone). [CHAR LIMIT=40] -->
    <string name="header_category_system">SYSTEM</string>

    <!-- Phone info -->
    <!-- Phone Info screen. Button label to turn on the radio . Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="turn_on_radio">Turn on radio</string>
    <!-- Phone Info screen. Button label to turn off the radio . Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="turn_off_radio">Turn off radio</string>

    <!-- Phone SMS over IMS on. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="sms_over_ims_on">Turn on SMS over IMS</string>
    <!-- Phone SMS over IMS off. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="sms_over_ims_off">Turn off SMS over IMS</string>

    <!-- Phone SMS over IMS IMS registration required on. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="ims_reg_required_on">Turn on IMS registration required</string>
    <!-- Phone IMS registration required off. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="ims_reg_required_off">Turn off IMS registration required</string>

    <!-- Phone ram dump on. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="lte_ram_dump_on">Turn on lte ram dump</string>
    <!-- Phone ram dump off. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="lte_ram_dump_off">Turn off lte ram dump</string>

    <!-- Phone Info screen. Menu item label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_menu_viewADN">View SIM address book</string>
    <!-- Phone Info screen. Menu item label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_menu_viewFDN">View Fixed Dialing Numbers</string>
    <!-- Phone Info screen. Menu item label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_menu_viewSDN">View Service Dialing Numbers</string>
    <!-- Phone Info screen. Menu item label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_menu_getPDP">Get PDP list</string>

    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_service_in">In service</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_service_out">Out of service</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_service_emergency">Emergency calls only</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_service_off">Radio off</string>

    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_roaming_in">Roaming</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_roaming_not">Not roaming</string>

    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_phone_idle">Idle</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_phone_ringing">Ringing</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_phone_offhook">Call in progress</string>

    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_data_disconnected">Disconnected</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_data_connecting">Connecting</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_data_connected">Connected</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_data_suspended">Suspended</string>

    <!-- Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_unknown">unknown</string>
    <!-- Phone Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_display_packets">pkts</string>
    <!-- Phone Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_display_bytes">bytes</string>
    <!-- Phone Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_display_dbm">dBm</string>
    <!-- Phone Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_display_asu">asu</string>
    <!-- Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_lac">LAC</string>
    <!-- Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_cid">CID</string>

    <!-- Used for diagnostic info screens, precise translation isn't needed. Unmounts the SD card from the phone, meaning it will become available for an attached computer  [CHAR LIMIT=25] -->
    <string name="sdcard_unmount" product="nosdcard">Unmount USB storage</string>
    <!-- Used for diagnostic info screens, precise translation isn't needed. Unmounts the SD card from the phone, meaning it will become available for an attached computer  -->
    <string name="sdcard_unmount" product="default">Unmount SD card</string>

    <!-- Used for diagnostic info screens, precise translation isn't needed. Formats the SD card in the phone, meaning it will be erased and reformatted [CHAR LIMIT=25] -->
    <string name="sdcard_format" product="nosdcard">Erase USB storage</string>
    <!-- Used for diagnostic info screens, precise translation isn't needed. Formats the SD card in the phone, meaning it will be erased and reformatted -->
    <string name="sdcard_format" product="default">Erase SD card</string>

    <!-- choice for the font size spinner -->
    <string name="small_font">Small</string>
    <!-- choice for the font size spinner -->
    <string name="medium_font">Medium</string>
    <!-- choice for the font size spinner -->
    <string name="large_font">Large</string>

    <!-- Do not translate. label for font size preview.  Does not need to be translated. -->
    <string name="font_size_preview_text">Servez à ce monsieur une bière et des kiwis.</string>
    <!-- Button. Chosen when they want to save the chosen text size. -->
    <string name="font_size_save">OK</string>

    <!-- Title for a notification shown. [CHAR LIMIT=25] -->
    <string name="sdcard_setting" product="nosdcard">USB storage</string>
    <!-- Title for a notification shown. -->
    <string name="sdcard_setting" product="default">SD card</string>

    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_status_label">Battery status:</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_power_label">Power plug:</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_scale_label">Battery scale:</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_level_label">Battery level:</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_health_label">Battery health:</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_technology_label">Battery technology:</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_voltage_label">Battery voltage:</string>
    <!-- Battery Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_voltage_units">mV</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_temperature_label">Battery temperature:</string>
    <!-- Battery Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_temperature_units">\u00B0 C</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_uptime">Time since boot:</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_awake_battery">Awake time on battery:</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_awake_plugged">Awake time when charging:</string>
    <!-- Battery Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_screen_on">Screen ON time:</string>

    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_status_unknown">Unknown</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_status_charging">Charging</string>
    <!-- Battery Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_status_charging_ac">(AC)</string>
    <!-- Battery Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_status_charging_usb">(USB)</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_status_discharging">Discharging</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_status_not_charging">Not charging</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_status_full">Full</string>

    <!-- Battery Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_power_unplugged">Unplugged</string>
    <string name="battery_info_power_ac">AC</string>
    <string name="battery_info_power_usb">USB</string>
    <string name="battery_info_power_ac_usb">AC+USB</string>
    <string name="battery_info_power_unknown">Unknown</string>

    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_health_unknown">Unknown</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_health_good">Good</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_health_overheat">Overheat</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_health_dead">Dead</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_health_over_voltage">Over voltage</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_health_unspecified_failure">Unknown error</string>
    <!-- Battery Info screen. Value for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="battery_info_health_cold">Cold</string>

    <!-- Used as setting title (for checkbox) on second screen after selecting Bluetooth settings -->
    <string name="bluetooth">Bluetooth</string>
    <!-- Bluetooth settings screen, check box label when the Bluetooth device can be seen by others -->
    <string name="bluetooth_visibility">Discoverable</string>
    <!-- Bluetooth settings screen, summary after selecting Discoverable check box [CHAR LIMIT=50] -->
    <string name="bluetooth_is_discoverable">Visible to all nearby Bluetooth devices (<xliff:g id="discoverable_time_period">%1$s</xliff:g>)</string>
    <!-- Bluetooth settings screen, summary when Discoverable duration is set to "forever" [CHAR LIMIT=50] -->
    <string name="bluetooth_is_discoverable_always">Visible to all nearby Bluetooth devices</string>
    <!-- Bluetooth settings screen, summary text when not discoverable and no paired devices [CHAR LIMIT=50] -->
    <string name="bluetooth_not_visible_to_other_devices">Not visible to other Bluetooth devices</string>
    <!-- Bluetooth settings screen, summary text when not discoverable with paired devices [CHAR LIMIT=50] -->
    <string name="bluetooth_only_visible_to_paired_devices">Only visible to paired devices</string>
    <!-- Bluetooth settings screen, Discoverable checkbox summary text -->
    <string name="bluetooth_not_discoverable">Make device discoverable</string>
    <!-- Bluetooth settings screen, option name to pick discoverability timeout duration (a list dialog comes up) -->
    <string name="bluetooth_visibility_timeout">Visibility timeout</string>
    <!-- Bluetooth settings screen, Discoverable timout list dialog summary text -->
    <string name="bluetooth_visibility_timeout_summary">Set how long device will be discoverable</string>
    <!-- Bluetooth settings screen, check box label whether or not to allow
        bluetooth voice dialing when lock screen is up-->
    <string name="bluetooth_lock_voice_dialing">Lock voice dialing</string>
    <!-- Bluetooth settings screen, lock voice dialing checkbox summary text -->
    <string name="bluetooth_lock_voice_dialing_summary">
      Prevent use of the bluetooth dialer when the screen is locked
    </string>
    <!-- Bluetooth settings screen, heading above the list of nearby bluetooth devices -->
    <string name="bluetooth_devices">Bluetooth devices</string>
    <!-- Bluetooth settings screen, title for the current bluetooth name setting -->
    <string name="bluetooth_device_name">Device name</string>
    <!-- Bluetooth settings screen, summary text when there isn't a name set (for the name setting) -->
    <string name="bluetooth_name_not_set">No name set, using account name</string>
    <!-- Bluetooth settings screen, menu item to scan for nearby bluetooth devices -->
    <string name="bluetooth_scan_for_devices">Scan for devices</string>
    <!-- Bluetooth settings screen, menu item to change this device's Bluetooth name. [CHAR LIMIT=30] -->
    <string name="bluetooth_rename_device" product="tablet">Rename tablet</string>
    <!-- Bluetooth settings screen, menu item to change this device's Bluetooth name. [CHAR LIMIT=30] -->
    <string name="bluetooth_rename_device" product="default">Rename phone</string>
    <!-- Bluetooth settings screen, confirmation button for rename device dialog. [CHAR LIMIT=20] -->
    <string name="bluetooth_rename_button">Rename</string>
    <!-- Bluetooth settings.  Dialog title to confirm disconnecting from all profiles of a device. [CHAR LIMIT=30] -->
    <string name="bluetooth_disconnect_title">Disconnect?</string>
    <!-- Bluetooth settings.  Message for disconnecting from all profiles of a bluetooth device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_disconnect_all_profiles">This will end your connection with:&lt;br>&lt;b><xliff:g id="device_name">%1$s</xliff:g>&lt;/b></string>

    <!-- Bluetooth settings.  Dialog title to disable a single profile of a device. [CHAR LIMIT=40] -->
    <string name="bluetooth_disable_profile_title">Disable profile?</string>
    <!-- Bluetooth settings.  Message for disabling a profile of a bluetooth device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_disable_profile_message">This will disable:&lt;br>&lt;b><xliff:g id="profile_name">%1$s</xliff:g>&lt;/b>&lt;br>&lt;br>From:&lt;br>&lt;b><xliff:g id="device_name">%2$s</xliff:g>&lt;/b></string>

    <!-- Bluetooth settings.  Message when connected to a device. [CHAR LIMIT=40] -->
    <string name="bluetooth_connected">Connected</string>
    <!-- Bluetooth settings.  Message when connected to a device, except for phone audio. [CHAR LIMIT=40] -->
    <string name="bluetooth_connected_no_headset">Connected (no phone)</string>
    <!-- Bluetooth settings.  Message when connected to a device, except for media audio. [CHAR LIMIT=40] -->
    <string name="bluetooth_connected_no_a2dp">Connected (no media)</string>
    <!-- Bluetooth settings.  Message when connected to a device, except for phone/media audio. [CHAR LIMIT=40] -->
    <string name="bluetooth_connected_no_headset_no_a2dp">Connected (no phone or media)</string>
    <!-- Bluetooth settings.  Message when a device is disconnected -->
    <string name="bluetooth_disconnected">Disconnected</string>
    <!-- Bluetooth settings.  Message when disconnecting from a device -->
    <string name="bluetooth_disconnecting">Disconnecting\u2026</string>
    <!-- Bluetooth settings.  Message when connecting to a device -->
    <string name="bluetooth_connecting">Connecting\u2026</string>
    <!-- Bluetooth settings.  Message when the device state is unknown -->
    <string name="bluetooth_unknown" />
    <!--Bluetooth settings screen, summary text under individual Bluetooth devices when pairing -->
    <string name="bluetooth_pairing">Pairing\u2026</string>
    <!--Bluetooth settings screen, summary text for Bluetooth device with no name -->
    <string name="bluetooth_device">Unnamed Bluetooth device</string>
    <!--Bluetooth settings screen, text that appears in heading bar when scanning for devices -->
    <string name="progress_scanning">Searching</string>
    <!--Bluetooth settings screen, text that appears in heading bar when scanning for devices is finished, indicating that user can tap on a device to pair with it [CHAR LIMIT=20]-->
    <string name="progress_tap_to_pair">Touch to pair</string>
    <!--Bluetooth settings screen, text that appears when scanning for devices is finished and no nearby bluetooth device was found [CHAR LIMIT=40]-->
    <string name="bluetooth_no_devices_found">No nearby Bluetooth devices were found.</string>
    <!-- Notification ticker text (shown in the status bar) when a Bluetooth device wants to pair with us -->
    <string name="bluetooth_notif_ticker">Bluetooth pairing request</string>
    <!-- Notification title when a Bluetooth device wants to pair with us -->
    <string name="bluetooth_notif_title">Pairing request</string>
    <!-- Notification message when a Bluetooth device wants to pair with us -->
    <string name="bluetooth_notif_message">Touch to pair with <xliff:g id="device_name">%1$s</xliff:g></string>
    <!-- Bluetooth settings screen, menu to show the list of received files [CHAR LIMIT=30] -->
    <string name="bluetooth_show_received_files">Show received files</string>

    <!-- Strings for BluetoothDevicePicker -->
    <string name="device_picker">Bluetooth device picker</string>

    <!-- Strings for dialog title when asking to the user whether to allow an app to enable discovery mode -->
    <string name="bluetooth_permission_request">"Bluetooth permission request"</string>

    <!-- Strings for asking to the user whether to allow an app to enable bluetooth -->
    <string name="bluetooth_ask_enablement">"An app wants to turn on Bluetooth. Allow?"</string>

    <!-- Strings for asking to the user whether to allow an app to enable discovery mode -->
    <string name="bluetooth_ask_discovery" product="tablet">"An app on your tablet wants to make your tablet discoverable by other Bluetooth devices for <xliff:g id="timeout">%1$d</xliff:g> seconds. Allow?"</string>
    <!-- Strings for asking to the user whether to allow an app to enable discovery mode -->
    <string name="bluetooth_ask_discovery" product="default">"An app on your phone wants to make your phone discoverable by other Bluetooth devices for <xliff:g id="timeout">%1$d</xliff:g> seconds. Allow?"</string>

    <!-- Strings for asking to the user whether to allow an app to enable lasting discovery mode  -->
    <string name="bluetooth_ask_lasting_discovery" product="tablet">"An app on your tablet wants to make your tablet \u201calways discoverable\u201d by other Bluetooth devices. Allow?"</string>
    <string name="bluetooth_ask_lasting_discovery" product="default">"An app on your phone wants to make your phone \u201calways discoverable\u201d by other Bluetooth devices. Allow?"</string>

    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode -->
    <string name="bluetooth_ask_enablement_and_discovery" product="tablet">"An app on your tablet wants to turn on Bluetooth and make your tablet discoverable by other devices for <xliff:g id="timeout">%1$d</xliff:g> seconds. Allow?"</string>
    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode -->
    <string name="bluetooth_ask_enablement_and_discovery" product="default">"An app on your phone wants to turn on Bluetooth and make your phone discoverable by other devices for <xliff:g id="timeout">%1$d</xliff:g> seconds. Allow?"</string>

    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode -->
    <string name="bluetooth_ask_enablement_and_lasting_discovery" product="tablet">"An app on your tablet wants to turn on Bluetooth and make your tablet discoverable by other devices. Allow?"</string>
    <string name="bluetooth_ask_enablement_and_lasting_discovery" product="default">"An app on your phone wants to turn on Bluetooth and make your phone discoverable by other devices. Allow?"</string>

    <!-- Strings for msg to display to user while bluetooth is turning on [CHAR LIMIT=60] -->
    <string name="bluetooth_turning_on">"Turning Bluetooth on\u2026"</string>

    <!-- Strings for msg to display to user while bluetooth is turning off [CHAR LIMIT=60] -->
    <string name="bluetooth_turning_off">"Turning Bluetooth off\u2026"</string>

    <!-- Strings for device profile auto connect setting -->
    <string name="bluetooth_auto_connect">Auto-connect</string>

    <!-- Activity label of BluetoothPermissionActivity [CHAR LIMIT=none]-->
    <string name="bluetooth_connection_permission_request">"Bluetooth connection request"</string>

    <!-- Notification message when a remote Bluetooth device wants to connect to a Bluetooth profile [CHAR LIMIT=none]-->
    <string name="bluetooth_connection_notif_message">"Touch to connect to \u0022<xliff:g id="device_name">%1$s</xliff:g>\u0022."</string>

    <!-- Bluetooth connection permission Alert Activity text [CHAR LIMIT=none]-->
    <string name="bluetooth_connection_dialog_text">"Do you want to connect to \u0022<xliff:g id="device_name">%1$s</xliff:g>\u0022?"</string>

    <!-- Activity label of BluetoothPbPermissionActivity, also used as Strings in the permission dialog [CHAR LIMIT=none] -->
    <string name="bluetooth_phonebook_request">"Phone book request"</string>

    <!-- Bluetooth phone book permission Alert Activity text [CHAR LIMIT=none] -->
    <string name="bluetooth_pb_acceptance_dialog_text">%1$s would like to access your contacts and call history. Give access to %2$s?</string>

    <!-- Bluetooth phone book permission Alert Activity checkbox text [CHAR LIMIT=none] -->
    <string name="bluetooth_pb_remember_choice">Don\'t ask again</string>

    <!-- Date & time settings screen title -->
    <string name="date_and_time">Date &amp; time settings</string>
    <!-- Date/time settings.  Summary of the checkbox for choosing between 12 hour time or 24 hour time.  Sample of 12-hour time -->
    <string name="date_time_12_hour_sample">1:00 pm</string>
    <!-- Date/time settings.  Summary of the checkbox for choosing between 12 hour time or 24 hour time.  Sample of 24-hour time -->
    <string name="date_time_24_hour_sample">13:00</string>
    <!-- The title of the activity to pick a time zone. -->
    <string name="choose_timezone">Choose time zone</string>
    <!-- Do not translate. Used as the value for a setting. -->
    <string name="default_date_format"><xliff:g id="default_date_format">MM/dd/yyyy</xliff:g></string>

    <!-- The option in the date-format picker for using the normal format
         called for by the user's locale. -->
    <string name="normal_date_format">Regional (<xliff:g id="date" example="12-31-2009">%s</xliff:g>)</string>

    <!-- Label of preview text when tweaking font size -->
    <string name="display_preview_label">Preview:</string>
    <!-- Label for chosen font size -->
    <string name="display_font_size_label">Font size:</string>

    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_data_label"><xliff:g id="data">Data:</xliff:g></string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_sendbroadcast_text">Send <xliff:g id="broadcast">broadcast</xliff:g></string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_action_label"><xliff:g id="action">Action</xliff:g>:</string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_startactivity_text">Start <xliff:g id="activity">activity</xliff:g></string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_resource_label"><xliff:g id="resource">Resource</xliff:g>: </string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_account_label">Account: </string>

    <!-- HTTP proxy settings title -->
    <string name="proxy_settings_title">Proxy settings</string>
    <!-- HTTP proxy settings. Button to clear the proxy box. -->
    <string name="proxy_clear_text">Clear</string>
    <!-- HTTP proxy settings. The port number label. -->
    <string name="proxy_port_label">Proxy port</string>
    <!-- HTTP proxy settings. The hint text field for port. -->
    <string name="proxy_port_hint" translatable="false">8080</string>
    <!-- HTTP proxy settings. The exclusion list label. -->
    <string name="proxy_exclusionlist_label">Bypass proxy for</string>
    <!-- HTTP proxy settings. The hint text for proxy exclusion list. [CHAR LIMIT=50]-->
    <string name="proxy_exclusionlist_hint">example.com,mycomp.test.com,localhost</string>
    <!-- HTTP proxy settings. The button to restore the defaults. -->
    <string name="proxy_defaultView_text">Restore defaults</string>
    <!-- HTTP proxy settings. The button to save. -->
    <string name="proxy_action_text">Done</string>
    <!-- HTTP proxy settings. The text field for the hostname -->
    <string name="proxy_hostname_label">Proxy hostname</string>
    <!-- HTTP proxy settings. The hint text field for the hostname. [CHAR LIMIT=50] -->
    <string name="proxy_hostname_hint">proxy.example.com</string>
    <!-- HTTP proxy settings. Title if there is an error-->
    <string name="proxy_error">Attention</string>
    <!-- HTTP proxy settings. Button to get rid of error box-->
    <string name="proxy_error_dismiss">OK</string>
    <!-- HTTP proxy settings. The error if the hostname is not valid -->
    <string name="proxy_error_invalid_host">The hostname you typed isn\'t valid.</string>
    <!-- HTTP proxy settings. The error if the exclusion list is not valid -->
    <string name="proxy_error_invalid_exclusion_list">The exclusion list you typed isn\'t properly formatted. Type a comma-separated list of excluded domains.</string>
    <!-- HTTP proxy settings. Error msg -->
    <string name="proxy_error_empty_port">You must complete the port field.</string>
    <!-- HTTP proxy settings. Error msg -->
    <string name="proxy_error_empty_host_set_port">The port field must be empty if the host field is empty.</string>
    <!-- HTTP proxy settings. Error msg -->
    <string name="proxy_error_invalid_port">The port you typed isn\'t valid.</string>
    <!-- HTTP proxy settings. Warning message about limited application support [CHAR LIMIT=100]-->
    <string name="proxy_warning_limited_support">The HTTP proxy is used by the browser but may not be used by the other apps.</string>

    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_signal_location_label">Location:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_neighboring_location_label">Neighboring CID:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_data_attempts_label">Data attempts:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->

    <string name="radio_info_gprs_service_label">GPRS service:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_roaming_label">Roaming:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_imei_label">IMEI:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_call_redirect_label">Call redirect:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ppp_resets_label">Number of PPP reset since boot:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_gsm_disconnects_label">GSM disconnects:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_current_network_label">Current network:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_data_successes_label">Data successes:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ppp_received_label">PPP received:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_gsm_service_label">GSM service:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_signal_strength_label">Signal strength:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_call_status_label">Call status:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ppp_sent_label">PPP sent:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_radio_resets_label">Radio resets:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_message_waiting_label">Message waiting:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_phone_number_label">Phone number:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_band_mode_label">Select radio band</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_network_type_label">Network type:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_set_perferred_label">Set preferred network type:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ping_ipaddr">Ping IpAddr:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ping_hostname">Ping Hostname(www.google.com):</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_http_client_test">HTTP Client test:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="ping_test_label">Run ping test</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_smsc_label">SMSC:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_smsc_update_label">Update</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_smsc_refresh_label">Refresh</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_toggle_dns_check_label">Toggle DNS check</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="oem_radio_info_label">OEM-specific Info/Settings</string>

    <!-- Band Mode Selection -->
    <!-- Band mode screen.  Title of activity. -->
    <string name="band_mode_title">Set GSM/UMTS band</string>
    <!-- Band mode screen.  Loading message. -->
    <string name="band_mode_loading">Loading band list\u2026</string>
    <!-- Band mode screen. Button caption to set the bandmode. -->
    <string name="band_mode_set">Set</string>
    <!-- Band mode screen. Status message when unsuccessful. -->
    <string name="band_mode_failed">Unsuccessful</string>
    <!-- Band mode screen. Statusm essage when successful. -->
    <string name="band_mode_succeeded">Successful</string>

    <!-- Instructions after the user changes the mass storage settings -->
    <string name="sdcard_changes_instructions">Changes take effect when USB cable is reconnected</string>
    <!-- Enable USB mass storage mode checkbox title -->
    <string name="sdcard_settings_screen_mass_storage_text">Enable USB mass storage</string>
    <!-- The label for total bytes on SD card -->
    <string name="sdcard_settings_total_bytes_label">Total bytes:</string>
    <!-- Message when there is no SD card present [CHAR LIMIT=30] -->
    <string name="sdcard_settings_not_present_status" product="nosdcard">USB storage not mounted</string>
    <!-- Message when there is no SD card present -->
    <string name="sdcard_settings_not_present_status" product="default">No SD card</string>
    <!-- Th label for the available (free) sapce on the SD card -->
    <string name="sdcard_settings_available_bytes_label">Available bytes:</string>
    <!-- Message when the SD card is being used by the computer as mass storage [CHAR LIMIT=30] -->
    <string name="sdcard_settings_mass_storage_status" product="nosdcard">USB storage is being used as a mass storage device</string>
    <!-- Message when the SD card is being used by the computer as mass storage -->
    <string name="sdcard_settings_mass_storage_status" product="default">SD card is being used as a mass storage device</string>
    <!-- Message when it is safe to remove the SD card [CHAR LIMIT=30] -->
    <string name="sdcard_settings_unmounted_status" product="nosdcard">It\'s now safe to remove the USB storage</string>
    <!-- Message when it is safe to remove the SD card -->
    <string name="sdcard_settings_unmounted_status" product="default">It\'s now safe to remove the SD card</string>
    <!-- Error message when the SD card was removed without properly unmounting [CHAR LIMIT=30] -->
    <string name="sdcard_settings_bad_removal_status" product="nosdcard">USB storage was removed while still in use!</string>
    <!-- Error message when the SD card was removed without properly unmounting -->
    <string name="sdcard_settings_bad_removal_status" product="default">SD card was removed while still in use!</string>
    <!-- Label for used bytes on the SD card -->
    <string name="sdcard_settings_used_bytes_label">Used bytes:</string>
    <!-- Message when it is scanning the SD card for new files [CHAR LIMIT=30]  -->
    <string name="sdcard_settings_scanning_status" product="nosdcard">Scanning USB storage for media\u2026</string>
    <!-- Message when it is scanning the SD card for new files -->
    <string name="sdcard_settings_scanning_status" product="default">Scanning SD card for media\u2026</string>
    <!-- Message when the SD card is mounted as read only [CHAR LIMIT=30] -->
    <string name="sdcard_settings_read_only_status" product="nosdcard">USB storage mounted read-only</string>
    <!-- Message when the SD card is mounted as read only -->
    <string name="sdcard_settings_read_only_status" product="default">SD card mounted read-only</string>
    <!-- SetupWizard strings used by DateTimeSettingsSetupWizard.  The button label for going to the next screen without storing the setting. [CHAR LIMIT=5] -->
    <string name="skip_label">Skip</string>
    <!-- SetupWizard strings used by DateTimeSettingsSetupWizard.  The button label for going to the next screen. -->
    <string name="next_label">Next</string>

    <!-- LocalePicker -->
    <!-- Title for the locale picker activity -->
    <string name="language_picker_title">Language</string>

    <!-- The title of the dialog to pick an activity.  This is shown when there are multiple activities that can do a particular action.  For example, suppose you click on the "Share" menu item in the Browser.  Since you can share the webpage URL via many communication methods, this dialog would come up with choices like "Email", "IM", etc.  This is a generic message, and the previous example is a single possible scenario (so please don't assume it's for the browser or anything :) ). -->
    <string name="activity_picker_label">Choose activity</string>
    <!-- Do not translate. -->
    <string name="debug_intent_sender_label">Debug intent sender</string>
    <!-- The title of the activity to see random device info. -->
    <string name="device_info_label">Device info</string>
    <!-- The title of the activity to see battery info. -->
    <string name="battery_info_label">Battery info</string>
    <!-- The title of the activity to adjust display settings -->
    <string name="display_label">Screen</string>
    <!-- The title of the activity to see phone info -->
    <string name="phone_info_label" product="tablet">Tablet info</string>
    <!-- The title of the activity to see phone info -->
    <string name="phone_info_label" product="default">Phone info</string>
    <!-- The title of the activity to adjust SD card settings [CHAR LIMIT=25] -->
    <string name="sd_card_settings_label" product="nosdcard">USB storage</string>
    <!-- The title of the activity to adjust SD card settings-->
    <string name="sd_card_settings_label" product="default">SD card</string>
    <!-- The title of the activity to adjust proxy settings -->
    <string name="proxy_settings_label">Proxy settings</string>

    <!-- ======================================================================================= -->
    <!-- NEW STUFF -->
    <!-- ======================================================================================= -->

    <!-- Button label for generic cancel action -->
    <string name="cancel">Cancel</string>

    <!-- Title of the Settings activity shown within the application itself. -->
    <string name="settings_label">Settings</string>
    <!-- Title of the Settings activity shown in the Launcher. [CHAR LIMIT=20] -->
    <string name="settings_label_launcher">Settings</string>
    <!-- Label for option to select a settings panel as a shortcut -->
    <string name="settings_shortcut">Settings shortcut</string>
    <!-- Wireless controls settings screen, setting check box label -->
    <string name="airplane_mode">Airplane mode</string>
    <!-- Main Settings screen settings title for things like airplane mode, tethering, NFC, VPN.  This will take you to another screen with those settings. -->
    <string name="radio_controls_title">More\u2026</string>
    <!-- Wireless Settings screen title for things like Wi-Fi, bluetooth, airplane mode. -->
    <string name="wireless_networks_settings_title">Wireless &amp; networks</string>
    <!-- Main Settings screen settings summary text for the "Wireless controls" setting -->
    <string name="radio_controls_summary">Manage WiFi, Bluetooth, airplane mode, mobile networks, &amp; VPNs</string>

    <!-- mobile network settings screen, setting check box title -->
    <string name="roaming">Data roaming</string>
    <!-- mobile network settings screen, setting option summary text when check box is selected -->
    <string name="roaming_enable">Connect to data services when roaming</string>
    <!-- mobile network settings screen, setting option summary text when check box is clear -->
    <string name="roaming_disable">Connect to data services when roaming</string>
    <!-- mobile network settings screen, dialog message when you are roaming and clear the "Data roaming" check box -->
    <string name="roaming_reenable_message">You have lost data connectivity because you left your home network with data roaming turned off.</string>
    <!-- mobile network settings screen, button on dialog box that appears when you are roaming and clear the "Data roaming" check box -->
    <string name="roaming_turn_it_on_button">Turn it on</string>
    <!-- mobile network settings screen, message in dialog box that appears when you select the "Data roaming" check box -->
    <string name="roaming_warning">Allow data roaming? You may incur significant roaming charges!</string>
    <!-- mobile network settings screen, title of dialog box that appears when you select the "Data roaming" check box -->
    <string name="roaming_reenable_title">Attention</string>
    <!-- mobile network settings screen, setting option name -->
    <string name="networks">Operator selection</string>
    <!-- mobile network settings screen, setting option summary text -->
    <string name="sum_carrier_select">Choose a network operator</string>

    <!-- Date and time settings --><skip />
    <!-- Main Settings screen setting option name to go into the date and time settings-->
    <string name="date_and_time_settings_title">Date &amp; time</string>
    <!-- Title for Date & Time settings screen in SetupWizard [CHAR LIMIT=40] -->
    <string name="date_and_time_settings_title_setup_wizard">Set date and time</string>
    <!-- Main Settings screen setting option summary text for the item to go into the date and time settings. -->
    <string name="date_and_time_settings_summary">Set date, time, time zone, &amp; formats</string>
    <!-- Date & time setting screen setting check box title if the date and time should be determined automatically [CHAR LIMIT=25] -->
    <string name="date_time_auto">Automatic date &amp; time</string>
    <!-- Date & time setting screen setting option summary text when Automatic check box is selected
        (that is, when date and time should be determined automatically) [CHAR LIMIT=100] -->
    <string name="date_time_auto_summaryOn">Use network-provided time</string>
    <!-- Date & time setting screen setting option summary text when Automatic check box is clear
        [CHAR LIMIT=100] -->
    <string name="date_time_auto_summaryOff">Use network-provided time</string>
    <!-- Date & time setting screen setting check box title if the time zone should be determined automatically [CHAR LIMIT=25] -->
    <string name="zone_auto">Automatic time zone</string>
    <!-- Date & time setting screen setting option summary text when Automatic time zone check box is selected (that is, when date and time should be determined automatically)
        [CHAR LIMIT=100]  -->
    <string name="zone_auto_summaryOn">Use network-provided time zone</string>
    <!-- Date & time setting screen setting option summary text when Automatic time zone check box is clear
        [CHAR LIMIT=100] -->
    <string name="zone_auto_summaryOff">Use network-provided time zone</string>
    <!-- Date & time setting screen setting check box title -->
    <string name="date_time_24hour">Use 24-hour format</string>
    <!-- Date & time setting screen setting option title -->
    <string name="date_time_set_time">Set time</string>
    <!-- Date & time setting screen setting option title -->
    <string name="date_time_set_timezone">Select time zone</string>
    <!-- Date & time setting screen setting option title -->
    <string name="date_time_set_date">Set date</string>
    <!-- Date & time setting screen setting option title.  This setting allows the user to choose how the date should be displayed in apps (what ordering for month and day, etc.) -->
    <string name="date_time_date_format">Select date format</string>
    <!-- Menu item on Select time zone screen -->
    <string name="zone_list_menu_sort_alphabetically">Sort alphabetically</string>
    <!-- Menu item on Select time zone screen -->
    <string name="zone_list_menu_sort_by_timezone">Sort by time zone</string>
    <!-- Title string shown above DatePicker, letting a user select system date
         [CHAR LIMIT=20] -->
    <string name="date_picker_title">Date</string>
    <!-- Title string shown above TimePicker, letting a user select system time
         [CHAR LIMIT=20] -->
    <string name="time_picker_title">Time</string>

    <!-- Security Settings --><skip />

    <!-- Security settings screen when using face unlock, setting option name to start an activity that allows the user to improve accuracy by adding additional enrollment faces -->
    <string name="biometric_weak_improve_matching_title">Improve face matching</string>

    <!-- Security settings screen, setting option name to change screen timeout -->
    <string name="lock_after_timeout">Automatically lock</string>
    <!-- Security settings screen, setting option summary to change screen timeout -->
    <string name="lock_after_timeout_summary"><xliff:g id="timeout_string">%1$s</xliff:g> after sleep</string>
    <!-- Text shown next to checkbox for showing owner info on LockScreen [CHAR LIMIT=50]-->
    <string name="show_owner_info_on_lockscreen_label">Show owner info on lock screen</string>
    <!-- Text shown for title of owner info setting [CHAR LIMIT=20]-->
    <string name="owner_info_settings_title">Owner info</string>
    <!-- Text shown for summary of owner info setting [CHAR LIMIT=40]-->
    <string name="owner_info_settings_summary"></string>
    <!-- Hint text shown in owner info edit text [CHAR LIMIT=50] -->
    <string name="owner_info_settings_edit_text_hint">Type text to display on the lock screen</string>
    <!-- Main Settings screen setting option title for the item to take you to the location screen -->
    <string name="location_settings_title">Location services</string>
    <!-- Main Settings screen setting option title for the item to take you to the security screen -->
    <string name="security_settings_title">Security</string>
    <!-- Main Settings screen setting option summary text for the item tot ake you to the security and location screen -->
    <string name="security_settings_summary">Set My Location, screen unlock, SIM card lock, credential storage lock</string>
    <!-- Main Settings screen setting option summary text for the item to take you to the CDMA security and location screen -->
    <string name="cdma_security_settings_summary">Set My Location, screen unlock, credential storage lock</string>
    <!-- In the security screen, the header title for settings related to  Passwords-->
    <string name="security_passwords_title">Passwords</string>

    <!-- Title of the preferences category for preference items to control encryption -->
    <string name="crypt_keeper_settings_title">Encryption</string>

    <!-- Title of the preferences item to control encryption -->
    <string name="crypt_keeper_encrypt_title" product="tablet">Encrypt tablet</string>
    <!-- Title of the preferences item to control encryption -->
    <string name="crypt_keeper_encrypt_title" product="default">Encrypt phone</string>

    <!-- Summary of the preferences item to control encryption, when encryption is inactive -->
    <string name="crypt_keeper_encrypt_summary" product="tablet">
    Require a numeric PIN or password to decrypt your tablet each time you
    power it on</string>
    <!-- Summary of the preferences item to control encryption, when encryption is inactive -->
    <string name="crypt_keeper_encrypt_summary" product="default">
    Require a numeric PIN or password to decrypt your phone each time you
    power it on</string>
    <!-- Summary of the preferences item to control encryption, when encryption is active -->
    <string name="crypt_keeper_encrypted_summary">Encrypted</string>

    <!-- Informational text in the first confirmation screen before starting device encryption -->
    <string name="crypt_keeper_desc" product="tablet">
    You can encrypt your accounts, settings, downloaded apps and their data,
    media, and other files. Once you encrypt your tablet, you must enter a numeric PIN
    or password to decrypt it each time you power it on: you can\'t unencrypt your tablet
    except by performing a factory data reset, erasing all your data.\n\nEncryption takes
    an hour or more. You must start with a charged battery and keep your tablet plugged in
    until encryption is complete. If you interrupt the encryption process, you will lose
    some or all of your data.</string>
    <!-- Informational text in the first confirmation screen before starting device encryption -->
    <string name="crypt_keeper_desc" product="default">
    You can encrypt your accounts, settings, downloaded apps and their data,
    media, and other files. Once you encrypt your phone, you must enter a numeric PIN or
    password to decrypt it each time you power it on: you can\'t unencrypt your phone
    except by performing a factory data reset, erasing all your data.\n\nEncryption takes
    an hour or more. You must start with a charged battery and keep your phone plugged in
    until encryption is complete. If you interrupt the encryption process, you will lose
    some or all of your data.</string>

    <!-- Button text to start encryption process -->
    <string name="crypt_keeper_button_text" product="tablet">Encrypt tablet</string>
    <!-- Button text to start encryption process -->
    <string name="crypt_keeper_button_text" product="default">Encrypt phone</string>

    <!-- Warning string that will be displayed when encryption cannot be started -->
    <string name="crypt_keeper_low_charge_text">Charge your battery and try again.</string>
    <!-- Warning string that will be displayed when encryption cannot be started -->
    <string name="crypt_keeper_unplugged_text">Plug in your charger and try again.</string>

    <!-- Dialog title, shown when encryption cannot proceed because a PIN/Password is needed -->
    <string name="crypt_keeper_dialog_need_password_title">No lock screen PIN or password</string>
    <!-- Dialog message, shown when encryption cannot proceed because a PIN/Password is needed -->
    <string name="crypt_keeper_dialog_need_password_message">You must set a lock screen PIN or
    password before you can start encryption.</string>

    <!-- Title of the final confirmation screen before starting device encryption -->
    <string name="crypt_keeper_confirm_title">Confirm encryption</string>
    <!-- Warning text in the final confirmation screen before starting device encryption -->
    <string name="crypt_keeper_final_desc" product="tablet">
    Encrypt tablet? This operation is irreversible and if you interrupt it, you will lose data.
    Encryption takes an hour or more, during which the tablet will restart several times.
    </string>
    <!-- Warning text in the final confirmation screen before starting device encryption -->
    <string name="crypt_keeper_final_desc" product="default">
    Encrypt phone? This operation is irreversible and if you interrupt it, you will lose data.
    Encryption takes an hour or more, during which the phone will restart several times.
    </string>

    <!-- Title of the progress screen while encrypting the device -->
    <string name="crypt_keeper_setup_title">Encrypting</string>

    <!-- Informational text on the progress screen while encrypting the device -->
    <string name="crypt_keeper_setup_description" product="tablet">Wait while your tablet
    is being encrypted. <xliff:g id="percent" example="50">^1</xliff:g>% complete.</string>
    <!-- Informational text on the progress screen while encrypting the device -->
    <string name="crypt_keeper_setup_description" product="default">Wait while your phone
    is being encrypted. <xliff:g id="percent" example="50">^1</xliff:g>% complete.</string>

    <!-- Informational text on the password entry screen when password entry fails-->
    <string name="crypt_keeper_cooldown">Try again in <xliff:g id="delay" example="15">^1</xliff:g> seconds.</string>

    <!-- Informational text on the password entry screen prompting the user for their password -->
    <string name="crypt_keeper_enter_password">Type your password</string>

    <!-- Title of the encryption screen when encrypting the device failed -->
    <string name="crypt_keeper_failed_title">Encryption unsuccessful</string>

    <!-- Informational text when encryption fails -->
    <string name="crypt_keeper_failed_summary" product="tablet">
      Encryption was interrupted and can\'t complete. As a result, the data on
      your tablet is no longer accessible.
      \n\n
      To resume using your tablet, you must perform a factory reset.
      When you set up your tablet after the reset, you\'ll have an opportunity
      to restore any data that was backed up to your Google Account.
    </string>

    <!-- Informational text when encryption fails -->
    <string name="crypt_keeper_failed_summary" product="default">
      Encryption was interrupted and can\'t complete. As a result, the data on
      your phone is no longer accessible.
      \n\nTo resume using your phone, you must perform a factory reset.
      When you set up your phone after the reset, you\'ll have an opportunity
      to restore any data that was backed up to your Google Account.
    </string>

    <!-- Unlock Picker Settings --><skip />

    <!-- Security Picker --><skip />
    <!--  Title for security picker to choose the unlock method: None/Pattern/PIN/Password [CHAR LIMIT=22] -->
    <string name="lock_settings_picker_title">Select screen lock</string>

    <!--  Title for security picker when choosing a facelock's backup unlock method: Pattern/PIN [CHAR LIMIT=22] -->
    <string name="backup_lock_settings_picker_title">Choose backup lock</string>

    <!--  Main Security lock settings --><skip />
    <!--  Title for PreferenceScreen to launch picker for security method when there is none [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_launch_picker_title">Screen lock</string>

    <!--  Title for PreferenceScreen to change security method: None/Pattern/PIN/Password [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_launch_picker_change_title">Change lock screen</string>

    <!--  Summary for PreferenceScreen to changeecurity method: None/Pattern/PIN/Password [CHAR LIMIT=45]  -->
    <string name="unlock_set_unlock_launch_picker_change_summary">Change or disable pattern, PIN, or password security</string>

    <!--  Summary for PreferenceScreen to changeecurity method: None/Pattern/PIN/Password [CHAR LIMIT=45]  -->
    <string name="unlock_set_unlock_launch_picker_enable_summary">Choose a method to lock the screen</string>

    <!-- Info explaining the backup lock which is used for facelock -->
    <string name="unlock_backup_info_summary">When Face Unlock can\'t see you, how do you want to unlock?</string>

    <!-- Title for preference that disables unlock security [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_off_title">None</string>
    <!-- Summary for preference that disables unlock security [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_off_summary"></string>

    <!-- Title for preference that disables unlock security [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_none_title">Slide</string>
    <!-- Summary for preference that disables unlock security [CHAR LIMIT=45]-->
    <string name="unlock_set_unlock_none_summary">No security</string>

    <!-- Title for preference that guides the user through a weak biometric lock [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_biometric_weak_title">Face Unlock</string>
    <!-- Summary for preference that disables unlock security [CHAR LIMIT=45]-->
    <string name="unlock_set_unlock_biometric_weak_summary">Low security, experimental</string>

    <!-- Title for preference that guides the user through creating an unlock pattern [CHAR LIMIT=22]-->
    <string name="unlock_set_unlock_pattern_title">Pattern</string>
    <!-- Summary for preference that guides the user through creating an unlock pattern [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_pattern_summary">Medium security</string>

    <!-- Title for preference that guides the user through creating an unlock PIN (Personal Identification Number) [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_pin_title">PIN</string>
    <!-- Summary for preference that guides the user through creating an unlock PIN (Personal Identification Number) [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_pin_summary">Medium to high security</string>

    <!-- Title for preference that guides the user through creating an unlock password [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_password_title">Password</string>
    <!-- Title for preference that guides the user through creating an unlock password [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_password_summary">High security</string>

    <!-- Summary for preference that has been disabled by because of the DevicePolicyAdmin, or because device encryption is enabled, or because there are credentials in the credential storage [CHAR LIMIT=50] -->
    <string name="unlock_set_unlock_disabled_summary">Disabled by administrator, encryption policy, or credential storage</string>

    <!-- Summary for "Configure lockscreen" when lock screen is off [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_off">None</string>
    <!-- Summary for "Configure lockscreen" when security is disabled [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_none">Slide</string>
    <!-- Summary for "Configure lockscreen" when security biometric weak is enabled [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_biometric_weak">Face Unlock</string>
    <!-- Summary for "Configure lockscreen" when security pattern is enabled [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_pattern">Secured with pattern</string>
    <!-- Summary for "Configure lockscreen" when security PIN is enabled [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_pin">Secured with PIN</string>
    <!-- Summary for "Configure lockscreen" when security password is enabled [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_password">Secured with password</string>

    <!-- Title for option to turn of password/pin/pattern unlock. [CHAR LIMIT=22] -->
    <string name="unlock_disable_lock_title">Turn off screen lock</string>

    <!-- Summary shown under unlock_disable_lock_title when pattern is in use and can be removed [CHAR LIMIT=45] -->
    <string name="unlock_disable_lock_pattern_summary">Remove unlock pattern</string>
    <!-- Summary shown under unlock_disable_lock_title when PIN is in use and can be removed [CHAR LIMIT=45]-->
    <string name="unlock_disable_lock_pin_summary">Remove unlock PIN</string>
    <!-- Summary shown under unlock_disable_lock_title when password is in use and can be removed [CHAR LIMIT=45]-->
    <string name="unlock_disable_lock_password_summary">Remove unlock password</string>

    <!-- Title shown on security settings to allow the user to change their lockscreen pattern [CHAR LIMIT=22] -->
    <string name="unlock_change_lock_pattern_title">Change unlock pattern</string>
    <!-- Title shown on security settings to allow the user to change their lockscreen PIN [CHAR LIMIT=22] -->
    <string name="unlock_change_lock_pin_title">Change unlock PIN</string>
    <!-- Title shown on security settings to allow the user to change their lockscreen password [CHAR LIMIT=22]-->
    <string name="unlock_change_lock_password_title">Change unlock password</string>

    <!-- Hint shown in dialog screen when password is too short -->
    <string name="lockpassword_password_too_short">Password must be at least %d characters</string>
    <!-- Hint shown in dialog screen when PIN is too short -->
    <string name="lockpassword_pin_too_short">PIN must be at least %d characters</string>

    <!-- Hint shown after minimum password criteria is met -->
    <string name="lockpassword_press_continue">Touch Continue when done</string>

    <!-- Hint shown after minimum password criteria is met -->
    <string name="lockpassword_continue_label">Continue</string>

    <!-- Error shown in popup when password is too long -->
    <string name="lockpassword_password_too_long">Password must be fewer than <xliff:g id="number" example="17">%d</xliff:g> characters</string>
    <!-- Error shown in popup when PIN is too long -->
    <string name="lockpassword_pin_too_long">PIN must be fewer than <xliff:g id="number" example="17">%d</xliff:g> digits</string>

    <!-- Error shown when in PIN mode and user enters a non-digit -->
    <string name="lockpassword_pin_contains_non_digits">PIN must contain only digits 0-9</string>

    <!-- Error shown when in PIN mode and PIN has been used recently. Please keep this string short! -->
    <string name="lockpassword_pin_recently_used">Device administrator disallows using a recent PIN</string>

    <!-- Error shown when in PASSWORD mode and user enters an invalid character -->
    <string name="lockpassword_illegal_character">Password contains an illegal character</string>

    <!-- Error shown when in PASSWORD mode and password is all digits -->
    <string name="lockpassword_password_requires_alpha">Password must contain at least one letter</string>

    <!-- Error shown when in PASSWORD mode and password doesn't contain any digits -->
    <string name="lockpassword_password_requires_digit">Password must contain at least one digit</string>

    <!-- Error shown when in PASSWORD mode and password doesn't contain any symbols -->
    <string name="lockpassword_password_requires_symbol">Password must contain at least one symbol</string>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of letters -->
    <plurals name="lockpassword_password_requires_letters">
        <item quantity="one">Password must contain at least 1 letter</item>
        <item quantity="other">Password must contain at least %d letters</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of lowercase letters -->
    <plurals name="lockpassword_password_requires_lowercase">
        <item quantity="one">Password must contain at least 1 lowercase letter</item>
        <item quantity="other">Password must contain at least %d lowercase letters</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of uppercase letters -->
    <plurals name="lockpassword_password_requires_uppercase">
        <item quantity="one">Password must contain at least 1 uppercase letter</item>
        <item quantity="other">Password must contain at least %d uppercase letters</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of numerical digits -->
    <plurals name="lockpassword_password_requires_numeric">
        <item quantity="one">Password must contain at least 1 numerical digit</item>
        <item quantity="other">Password must contain at least %d numerical digits</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of special symbols -->
    <plurals name="lockpassword_password_requires_symbols">
        <item quantity="one">Password must contain at least 1 special symbol</item>
        <item quantity="other">Password must contain at least %d special symbols</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of non-letter characters -->
    <plurals name="lockpassword_password_requires_nonletter">
        <item quantity="one">Password must contain at least 1 non-letter character</item>
        <item quantity="other">Password must contain at least %d non-letter characters</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password has been used recently. Please keep this string short! -->
    <string name="lockpassword_password_recently_used">Device administrator disallows using a recent password</string>

    <!-- Label for ChoosePassword/PIN OK button -->
    <string name="lockpassword_ok_label">OK</string>

    <!-- Label for ChoosePassword/PIN OK button -->
    <string name="lockpassword_cancel_label">Cancel</string>

    <!-- Label for LockPatternTutorial Cancel button -->
    <string name="lockpattern_tutorial_cancel_label">Cancel</string>

    <!-- Label for LockPatternTutorial Continue button -->
    <string name="lockpattern_tutorial_continue_label">Next</string>

    <!-- Toast shown when lock pattern or password successfully setup. [CHAR LIMIT=64] -->
    <string name="lock_setup" msgid="5507462851158901718">Setup complete</string>

    <!-- In the security screen, the header title for settings related to device admins -->
    <string name="device_admin_title">Device administration</string>

    <!-- Title of preference to manage device admins -->
    <string name="manage_device_admin">Device administrators</string>

    <!-- Summary of preference to manage device policies -->
    <string name="manage_device_admin_summary">View or deactivate device administrators</string>

    <!-- Bluetooth settings -->
    <!-- Bluetooth settings check box title on Main Settings screen -->
    <string name="bluetooth_quick_toggle_title">Bluetooth</string>
    <!-- Bluetooth settings check box summary for turning on bluetooth -->
    <string name="bluetooth_quick_toggle_summary">Turn on Bluetooth</string>
    <!--Used as title on second screen after selecting Bluetooth settings -->
    <string name="bluetooth_settings">Bluetooth</string>
    <!--Wireless controls screen, settings title for the item to take you to the bluetooth settings screen -->
    <string name="bluetooth_settings_title">Bluetooth</string>
    <!--Wireless controls screen, settings summary for the item tot ake you to the bluetooth settings screen -->
    <string name="bluetooth_settings_summary">Manage connections, set device name &amp; discoverability</string>

    <!-- ======================================================================================= -->
    <!-- Note: The opening brackets of HTML style tags are escaped (e.g. "<b>" is "&lt;b>") in   -->
    <!--   the following resources to enable formatting followed by HTML styling, as described   -->
    <!--   here:  http://developer.android.com/guide/topics/resources/string-resource.html       -->
    <!-- ======================================================================================= -->

    <!-- Title for the dialog to enter PIN. [CHAR LIMIT=40] -->
    <string name="bluetooth_pairing_request">Bluetooth pairing request</string>

    <!-- Message when bluetooth dialog for pin entry is showing. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_enter_pin_msg">To pair with:<xliff:g id="bold">&lt;br>&lt;b></xliff:g><xliff:g id="device_name">%1$s</xliff:g><xliff:g id="end_bold">&lt;/b>&lt;br>&lt;br></xliff:g>Type the device\'s required PIN:</string>

    <!-- Message when bluetooth dialog for passkey entry is showing. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_enter_passkey_msg">To pair with:<xliff:g id="bold">&lt;br>&lt;b></xliff:g><xliff:g id="device_name">%1$s</xliff:g><xliff:g id="end_bold">&lt;/b>&lt;br>&lt;br></xliff:g>Type the device\'s required passkey:</string>

    <!-- Checkbox label for alphanumeric PIN entry (default is numeric PIN). [CHAR LIMIT=50] -->
    <string name="bluetooth_enable_alphanumeric_pin">PIN contains letters or symbols</string>

    <!-- Bluetooth PIN hint text (below the text entry box). [CHAR LIMIT=30] -->
    <string name="bluetooth_pin_values_hint">Usually 0000 or 1234</string>

    <!-- Pairing dialog text to remind user to enter the PIN on the other device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_enter_pin_other_device">You may also need to enter this PIN on the other device.</string>
    <!-- Pairing dialog text to remind user to enter the passkey on the other device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_enter_passkey_other_device">You may also need to enter this passkey on the other device.</string>

    <!-- Message for confirmation of passkey to complete pairing. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_confirm_passkey_msg">To pair with:&lt;br>&lt;b><xliff:g id="device_name">%1$s</xliff:g>&lt;/b>&lt;br>&lt;br>Make sure it is showing this passkey:&lt;br>&lt;b><xliff:g id="passkey">%2$s</xliff:g>&lt;/b></string>

    <!-- Message when bluetooth incoming pairing request for (2.1 devices) dialog is showing -->
    <string name="bluetooth_incoming_pairing_msg">From:&lt;br>&lt;b><xliff:g id="device_name">%1$s</xliff:g>&lt;/b>&lt;br>&lt;br>Pair with this device?</string>

    <!-- Message when bluetooth dialog when passkey or pin needs to be displayed. -->
    <string name="bluetooth_display_passkey_pin_msg">To pair with:<xliff:g id="bold1">&lt;br>&lt;b></xliff:g><xliff:g id="device_name">%1$s</xliff:g><xliff:g id="end_bold1">&lt;/b>&lt;br>&lt;br></xliff:g>Type on it:<xliff:g id="bold2">&lt;br>&lt;b></xliff:g><xliff:g id="passkey">%2$s</xliff:g><xliff:g id="end_bold2">&lt;/b></xliff:g>, then press Return or Enter.</string>

    <!-- Button text for accepting an incoming pairing request. [CHAR LIMIT=20] -->
    <string name="bluetooth_pairing_accept">Pair</string>
    <!-- Button text for declining an incoming pairing request. [CHAR LIMIT=20] -->
    <string name="bluetooth_pairing_decline">Cancel</string>

    <!-- Title for BT error dialogs. -->
    <string name="bluetooth_error_title"></string>
    <!-- Message for the error dialog when BT pairing fails generically. -->
    <string name="bluetooth_pairing_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g>.</string>
    <!-- Message for the error dialog when BT pairing fails because the PIN /
    Passkey entered is incorrect. -->
    <string name="bluetooth_pairing_pin_error_message">Couldn\'t pair with <xliff:g id="device_name">%1$s</xliff:g> because of an incorrect PIN or passkey.</string>
    <!-- Message for the error dialog when BT pairing fails because the other device is down. -->
    <string name="bluetooth_pairing_device_down_error_message">Can\'t communicate with <xliff:g id="device_name">%1$s</xliff:g>.</string>
    <!-- Message for the error dialog when BT pairing fails because the other device rejected the pairing. -->
    <string name="bluetooth_pairing_rejected_error_message">Pairing rejected by <xliff:g id="device_name">%1$s</xliff:g>.</string>

    <!-- Message for the error dialog when BT connecting operation fails generically. -->
    <string name="bluetooth_connecting_error_message">There was a problem connecting to <xliff:g id="device_name">%1$s</xliff:g>.</string>

    <!-- Bluetooth settings: The title of the preference (list item) that initiates a scan for devices -->
    <string name="bluetooth_preference_scan_title">Scan for devices</string>
    <!-- Bluetooth settings: The title of the action button that initiates a search for nearby devices [CHAR LIMIT=20] -->
    <string name="bluetooth_search_for_devices">Search for devices</string>
    <!-- Bluetooth settings: The title of the action button while a search for nearby devices is in progress [CHAR LIMIT=20] -->
    <string name="bluetooth_searching_for_devices">Searching\u2026</string>
    <!-- Bluetooth settings: The sub heading for device settings. [CHAR LIMIT=30] -->
    <string name="bluetooth_preference_device_settings">Device settings</string>
    <!-- Bluetooth settings: The sub heading for devices which have already been paired with this device. [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_paired_devices">Paired devices</string>
    <!-- Bluetooth settings: The sub heading for available devices during and after scanning. [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_found_devices">Available devices</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will connect to all profiles on the device. -->
    <string name="bluetooth_device_context_connect">Connect</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will disconnect from all profiles on the device. -->
    <string name="bluetooth_device_context_disconnect">Disconnect</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will first pair, and then connect to all profiles on the device. -->
    <string name="bluetooth_device_context_pair_connect">Pair &amp; connect</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will remove pairing with the device. -->
    <string name="bluetooth_device_context_unpair">Unpair</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will disconnect and remove pairing with the device. -->
    <string name="bluetooth_device_context_disconnect_unpair">Disconnect &amp; unpair</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will take the user to another screen where they can choose exactly which profiles to connect to. -->
    <string name="bluetooth_device_context_connect_advanced">Options\u2026</string>
    <!-- Bluetooth settings.  Menu option to Bluetooth advanced settings [CHAR LIMIT=20]-->
    <string name="bluetooth_menu_advanced">Advanced</string>
    <!-- Bluetooth settings. Title of the advanced bluetooth settings screen [CHAR LIMIT=30]-->
    <string name="bluetooth_advanced_titlebar">Advanced Bluetooth</string>
    <!-- Bluetooth settings. Text displayed when Bluetooth is off and device list is empty [CHAR LIMIT=50]-->
    <string name="bluetooth_empty_list_bluetooth_off">To see devices, turn Bluetooth on.</string>


    <!-- Bluetooth settings.  The title of the screen to pick which profiles to connect to on the device.  For example, headphones may have both A2DP and headset, this allows the user to choose which one he wants to connect to. -->
    <string name="bluetooth_connect_specific_profiles_title">Connect to\u2026</string>

    <!-- Bluetooth settings.  The user-visible string that is used whenever referring to the A2DP profile. -->
    <string name="bluetooth_profile_a2dp">Media audio</string>
    <!-- Bluetooth settings.  The user-visible string that is used whenever referring to the headset or handsfree profile. -->
    <string name="bluetooth_profile_headset">Phone audio</string>
    <!-- Bluetooth settings.  The user-visible string that is used whenever referring to the OPP profile. -->
    <string name="bluetooth_profile_opp">File transfer</string>
    <!-- Bluetooth settings. The user-visible string that is used whenever referring to the HID profile. -->
    <string name="bluetooth_profile_hid">Input device</string>
    <!-- Bluetooth settings. The user-visible string that is used whenever referring to the PAN profile (accessing Internet through remote device). [CHAR LIMIT=40]-->
    <string name="bluetooth_profile_pan">Internet access</string>
    <!-- Bluetooth settings. The user-visible string that is used whenever referring to the PAN profile (sharing this device's Internet connection). [CHAR LIMIT=40]-->
    <string name="bluetooth_profile_pan_nap">Internet connection sharing</string>

    <!-- Bluetooth settings.  Message for disconnecting from the A2DP profile. [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_a2dp_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from media audio.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the headset profile. [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_headset_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from handsfree audio.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the HID profile. [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_hid_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from input device.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the PAN profile (user role). [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_pan_user_profile">Internet access via <xliff:g id="device_name">%1$s</xliff:g> will be disconnected.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the PAN profile (NAP role). [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_pan_nap_profile" product="tablet"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from sharing this tablet\'s Internet connection.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the PAN profile (NAP role). [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_pan_nap_profile" product="default"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from sharing this phone\'s Internet connection.</string>

    <!-- Bluetooth settings.  Connection options screen.  The title of the screen. [CHAR LIMIT=40] -->
    <string name="bluetooth_device_advanced_title">Paired Bluetooth device</string>
    <!-- Bluetooth settings.  Connection options screen.  The title of the checkbox that controls whether the device is in "online" mode or "offline" mode.  This essentially is the checkbox that controls whether any checks / unchecks on a profile should be applied immediately, or next time the device is connected. -->
    <string name="bluetooth_device_advanced_online_mode_title">Connect</string>
    <!-- Bluetooth settings.  Connection options screen.  The summary of the online mode checkbox.  This describes what the setting does in the context of the screen. -->
    <string name="bluetooth_device_advanced_online_mode_summary">Connect to Bluetooth device</string>
    <!-- Bluetooth settings.  Connection options screen.  The title of the header that is above all of the profiles. -->
    <string name="bluetooth_device_advanced_profile_header_title">Profiles</string>
    <!-- Bluetooth settings. Connection options screen. Title for option to rename the device. [CHAR LIMIT=30] -->
    <string name="bluetooth_device_advanced_rename_device">Rename</string>
    <!-- Bluetooth settings. Connection options screen. Title for checkbox to enable incoming file transfers [CHAR LIMIT=30] -->
    <string name="bluetooth_device_advanced_enable_opp_title">Allow incoming file transfers</string>
    <!-- Bluetooth settings.  Connection options screen.  The summary for the A2DP checkbox preference when A2DP is connected. -->
    <string name="bluetooth_a2dp_profile_summary_connected">Connected to media audio</string>
    <!-- Bluetooth settings.  Connection options screen.  The summary for the headset checkbox preference when headset is connected. -->
    <string name="bluetooth_headset_profile_summary_connected">Connected to phone audio</string>
    <!-- Bluetooth settings.  Connection options screen.  The summary for the OPP checkbox preference when OPP is connected. -->
    <string name="bluetooth_opp_profile_summary_connected">Connected to file transfer server</string>
    <!-- Bluetooth settings.  Connection options screen.  The summary for the OPP checkbox preference when OPP is not connected. -->
    <string name="bluetooth_opp_profile_summary_not_connected">Not connected to file transfer server</string>
    <!-- Bluetooth settings. Connection options screen. The summary for the HID checkbox preference when HID is connected. -->
    <string name="bluetooth_hid_profile_summary_connected">Connected to input device</string>
    <!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (user role). [CHAR LIMIT=25]-->
    <string name="bluetooth_pan_user_profile_summary_connected">Connected to device for Internet access</string>
    <!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (NAP role). [CHAR LIMIT=25]-->
    <string name="bluetooth_pan_nap_profile_summary_connected">Sharing local Internet connection with device</string>

    <!-- Bluetooth settings.  Connection options screen.  The summary for the A2DP checkbox preference that describes how checking it will set the A2DP profile as preferred. -->
    <string name="bluetooth_a2dp_profile_summary_use_for">Use for media audio</string>
    <!-- Bluetooth settings.  Connection options screen.  The summary for the headset checkbox preference that describes how checking it will set the headset profile as preferred. -->
    <string name="bluetooth_headset_profile_summary_use_for">Use for phone audio</string>
    <!-- Bluetooth settings.  Connection options screen.  The summary for the OPP checkbox preference that describes how checking it will set the OPP profile as preferred. -->
    <string name="bluetooth_opp_profile_summary_use_for">Use for file transfer</string>
    <!-- Bluetooth settings. Connection options screen. The summary
         for the HID checkbox preference that describes how checking it
         will set the HID profile as preferred. -->
    <string name="bluetooth_hid_profile_summary_use_for">Use for input</string>
    <!-- Bluetooth settings. Connection options screen. The summary
         for the PAN checkbox preference that describes how checking it
         will set the PAN profile as preferred. -->
    <string name="bluetooth_pan_profile_summary_use_for">Use for Internet access</string>

    <!-- Bluetooth settings.  Dock Setting Title -->
    <string name="bluetooth_dock_settings">Dock Settings</string>
    <!-- Bluetooth settings.  Dock Setting Dialog Title -->
    <string name="bluetooth_dock_settings_title">Use dock for audio</string>
    <!-- Bluetooth settings.  Dock Setting Dialog - Checkbox selection 1: Use dock as speaker phone -->
    <string name="bluetooth_dock_settings_headset">As speaker phone</string>
    <!-- Bluetooth settings.  Dock Setting Dialog - Checkbox selection 2: Use dock for media audio -->
    <string name="bluetooth_dock_settings_a2dp">For music and media</string>
    <!-- Bluetooth settings.  Dock Setting Dialog - Remember setting and don't ask user again -->
    <string name="bluetooth_dock_settings_remember">Remember settings</string>

    <!-- NFC settings -->
    <!-- Used in the 1st-level settings screen to turn on NFC -->
    <string name="nfc_quick_toggle_title">NFC</string>
    <!-- Description of NFC in the 1st level settings screen. [CHAR LIMIT=NONE] -->
    <string name="nfc_quick_toggle_summary">Allow data exchange when the phone touches another device</string>
    <!-- Used to enter the Android Beam sharing preferences screen. This phrase is a trademark. [CHAR LIMIT=32] -->
    <string name="android_beam_settings_title">Android Beam</string>
    <!-- Used to describe the on state of the Android Beam feature [CHAR LIMIT=NONE] -->
    <string name="android_beam_on_summary">Ready to transmit app content via NFC</string>
    <!-- Used to describe the off state of the Android Beam feature [CHAR LIMIT=NONE] -->
    <string name="android_beam_off_summary">Off</string>
    <!-- Used to describe the enabled state of the Android Beam feature when NFC, which it relies on, is turned off [CHAR LIMIT=NONE] -->
    <string name="android_beam_disabled_summary">Unavailable because NFC is turned off</string>
    <!-- Used in the Android Beam sharing preferences screen. This phrase is a trademark. [CHAR LIMIT=32] -->
    <string name="android_beam_label">Android Beam</string>
    <!-- Explanation of the Android Beam feature in the Android Beam settings panel. The use of "beam" here is as a verb and not considered trademarked. [CHAR LIMIT=NONE] -->
    <string name="android_beam_explained">When this feature is turned on, you can beam app content to another NFC-capable device by holding the devices close together. For example, you can beam Browser pages, YouTube videos, People contacts, and more.\n\nJust bring the devices together (typically back to back) and then touch your screen. The app determines what gets beamed.</string>

    <!-- Wi-Fi Settings --> <skip />
    <!-- Used in the 1st-level settings screen to turn on Wi-Fi -->
    <string name="wifi_quick_toggle_title">WiFi</string>
    <!-- Used in the 1st-level settings screen as the turn-on summary -->
    <string name="wifi_quick_toggle_summary">Turn on WiFi</string>
    <!-- Used in the 1st-level settings screen to go to the 2nd-level settings screen  [CHAR LIMIT=20]-->
    <string name="wifi_settings">WiFi</string>
    <!-- Title of the Wi-fi settings screen -->
    <string name="wifi_settings_category">WiFi settings</string>
    <!-- Title of the Wi-fi settings entry in the left top level menu -->
    <string name="wifi_settings_title">WiFi</string>
    <!-- Summary text of the Wi-fi settings screen -->
    <string name="wifi_settings_summary">Set up &amp; manage wireless access points</string>
    <!-- Summary text when turning Wi-Fi or bluetooth on -->
    <string name="wifi_starting">Turning WiFi on\u2026</string>
    <!-- Summary text when turning Wi-Fi or bluetooth off -->
    <string name="wifi_stopping">Turning off WiFi\u2026</string>
    <!-- Summary text when Wi-Fi or bluetooth has error -->
    <string name="wifi_error">Error</string>
    <!-- Toast message when Wi-Fi or bluetooth is disallowed in airplane mode -->
    <string name="wifi_in_airplane_mode">In Airplane mode</string>
    <!-- Toast message when Wi-Fi cannot scan for networks -->
    <string name="wifi_fail_to_scan">Can\'t scan for networks</string>
    <!-- Checkbox title for option to notify user when open networks are nearby -->
    <string name="wifi_notify_open_networks">Network notification</string>
    <!-- Checkbox summary for option to notify user when open networks are nearby -->
    <string name="wifi_notify_open_networks_summary">Notify me when an open network is available</string>
    <!-- Checkbox title for option to toggle wifi watchdog service -->
    <string name="wifi_enable_watchdog_service">Avoid poor connections</string>
    <!-- Checkbox summary for option to toggle wifi watchdog service -->
    <string name="wifi_enable_watchdog_service_summary">Don\'t use a WiFi network unless it has a good Internet connection</string>
    <!-- Setting title for setting the wifi sleep policy. Do we keep Wi-Fi active when the screen turns off? -->
    <string name="wifi_setting_sleep_policy_title">Keep WiFi on during sleep</string>
    <!-- Generic error message when the sleep policy could not be set. -->
    <string name="wifi_setting_sleep_policy_error">There was a problem changing the setting</string>
    <!-- Action bar text message to manually add a wifi network [CHAR LIMIT=20]-->
    <string name="wifi_add_network">Add network</string>
    <!-- Header for the list of wifi networks-->
    <string name="wifi_access_points">WiFi networks</string>
    <!-- Menu option to scan Wi-Fi networks -->
    <string name="wifi_menu_scan">Scan</string>
    <!-- Menu option to Wi-Fi advanced settings -->
    <string name="wifi_menu_advanced">Advanced</string>
    <!-- Menu option to connect to a Wi-Fi network -->
    <string name="wifi_menu_connect">Connect to network</string>
    <!-- Menu option to delete a Wi-Fi network -->
    <string name="wifi_menu_forget">Forget network</string>
    <!-- Menu option to modify a Wi-Fi network configuration -->
    <string name="wifi_menu_modify">Modify network</string>
    <!-- Wi-Fi settings. text displayed when WiFi is off and network list is empty [CHAR LIMIT=50]-->
    <string name="wifi_empty_list_wifi_off">To see available networks, turn WiFi on.</string>

    <!-- Dialog for Access Points --> <skip />
    <!-- Label to show/hide advanced options -->
    <string name="wifi_show_advanced">Show advanced options</string>
    <!-- Label for network setup [CHAR LIMIT=50] -->
    <string name="wifi_network_setup">WPS</string>
    <!-- Label for the text view for WPS pin input [CHAR LIMIT=50] -->
    <string name="wifi_wps_pin">Type PIN from access point</string>
    <!-- Title for the WPS setup dialog [CHAR LIMIT=50] -->
    <string name="wifi_wps_setup_title">WPS setup</string>
    <!-- Text displayed in the WPS pin display dialog [CHAR LIMIT=75] -->
    <string name="wifi_wps_pin_output">Type the PIN <xliff:g id="wps_pin">%1$s</xliff:g> on the access point</string>
    <!-- Text displayed when WPS setup is in progress [CHAR LIMIT=75] -->
    <string name="wifi_wps_in_progress">WPS is already in progress and can take tens of seconds to complete</string>
    <!-- Text displayed when WPS fails to start [CHAR LIMIT=75] -->
    <string name="wifi_wps_failed">Couldn\'t start WPS, try again.</string>
    <!-- Label for the SSID of the network -->
    <string name="wifi_ssid">Network SSID</string>
    <!-- Label for the security of the connection -->
    <string name="wifi_security">Security</string>
    <!-- Label for the signal strength of the connection -->
    <string name="wifi_signal">Signal strength</string>
    <!-- Label for the status of the connection -->
    <string name="wifi_status">Status</string>
    <!-- Label for the link speed of the connection -->
    <string name="wifi_speed">Link speed</string>
    <!-- Label for the IP address of the connection -->
    <string name="wifi_ip_address">IP address</string>
    <!-- Hint text for the IP address -->
    <string name="wifi_ip_address_hint" translatable="false">192.168.1.128</string>
    <!-- Label for the EAP method of the network -->
    <string name="wifi_eap_method">EAP method</string>
    <!-- Label for the phase2 -->
    <string name="please_select_phase2">Phase 2 authentication</string>
    <!-- Label for the EAP CA certificate of the network -->
    <string name="wifi_eap_ca_cert">CA certificate</string>
    <!-- Label for the EAP user certificate of the network -->
    <string name="wifi_eap_user_cert">User certificate</string>
    <!-- Label for the EAP identity of the network -->
    <string name="wifi_eap_identity">Identity</string>
    <!-- Label for the EAP anonymous identity of the network -->
    <string name="wifi_eap_anonymous">Anonymous identity</string>
    <!-- Label for the password of the secured network -->
    <string name="wifi_password">Password</string>
    <!-- Label for the check box to show password -->
    <string name="wifi_show_password">Show password</string>
    <!-- Label for the spinner to show ip settings [CHAR LIMIT=25] -->
    <string name="wifi_ip_settings">IP settings</string>
    <!-- Hint for unchanged fields -->
    <string name="wifi_unchanged">(unchanged)</string>
    <!-- Hint for unspecified fields -->
    <string name="wifi_unspecified">(unspecified)</string>
    <!-- Summary for the remembered network. -->
    <string name="wifi_remembered">Saved</string>
    <!-- Status for networks disabled for unknown reason -->
    <string name="wifi_disabled_generic">Disabled</string>
    <!-- Status for networked disabled from a DNS or DHCP failure -->
    <string name="wifi_disabled_network_failure">Avoided poor Internet connection</string>
    <!-- Heading in the Wi-Fi dialog box when we display a reason for disabling a connection -->
    <string name="wifi_disabled_heading"></string>
    <!-- Detailed message in Wi-Fi dialog when we disable Wi-Fi due to DNS failure. -->
    <string name="wifi_disabled_help">The network was avoided due to poor connection. Turn off this behavior from the Settings &gt; WiFi screen, Advanced menu item.</string>
    <!-- Status for networks disabled from authentication failure (wrong password
         or certificate). -->
    <string name="wifi_disabled_password_failure">Authentication problem</string>
    <!-- Summary for the remembered network but currently not in range. -->
    <string name="wifi_not_in_range">Not in range</string>
    <!-- Substring of status line when Wi-Fi Protected Setup (WPS) is available and
         string is listed first -->
    <string name="wifi_wps_available_first_item">Protected network available</string>
    <!-- Substring of wifi status when Wi-Fi Protected Setup (WPS) is available and
         string is listed after a wifi_secured_* string-->
    <string name="wifi_wps_available_second_item">\u0020(protected network available)</string>
    <!-- Substring of wifi status for wifi with authentication.  This version is for when the
         string is first in the list (titlecase in english) -->
    <string name="wifi_secured_first_item">Secured with <xliff:g id="wifi_security_short">%1$s</xliff:g></string>
    <!-- Substring of wifi status for wifi with authentication.  This version is for when the
         string is not first in the list (lowercase in english) -->
    <string name="wifi_secured_second_item">, secured with <xliff:g id="wifi_security_short">%1$s</xliff:g></string>

    <!-- Do not translate.  Concise terminology for wifi with WEP security -->
    <string name="wifi_security_short_wep">WEP</string>
    <!-- Do not translate.  Concise terminology for wifi with WPA security -->
    <string name="wifi_security_short_wpa">WPA</string>
    <!-- Do not translate.  Concise terminology for wifi with WPA2 security -->
    <string name="wifi_security_short_wpa2">WPA2</string>
    <!-- Do not translate.  Concise terminology for wifi with both WPA/WPA2 security -->
    <string name="wifi_security_short_wpa_wpa2">WPA/WPA2</string>
    <!-- Do not translate.  Concise terminology for wifi with unknown PSK type -->
    <string name="wifi_security_short_psk_generic">@string/wifi_security_short_wpa_wpa2</string>
    <!-- Do not translate.  Concise terminology for wifi with 802.1x EAP security -->
    <string name="wifi_security_short_eap">802.1x</string>

    <!-- Used in Wi-Fi settings dialogs when Wi-Fi does not have any security. -->
    <string name="wifi_security_none">None</string>

    <!-- Do not translate.  Terminology for wifi with WEP security -->
    <string name="wifi_security_wep">WEP</string>
    <!-- Do not translate.  Terminology for wifi with WPA security -->
    <string name="wifi_security_wpa">WPA PSK</string>
    <!-- Do not translate.  Terminology for wifi with WPA2 security -->
    <string name="wifi_security_wpa2">WPA2 PSK</string>
    <!-- Do not translate.  Terminology for wifi with both WPA/WPA2 security, or unknown -->
    <string name="wifi_security_wpa_wpa2">WPA/WPA2 PSK</string>
    <!-- Do not translate.  Terminology for wifi with unknown PSK type -->
    <string name="wifi_security_psk_generic">@string/wifi_security_wpa_wpa2</string>
    <!-- Do not translate.  Concise terminology for wifi with 802.1x EAP security -->
    <string name="wifi_security_eap">802.1x EAP</string>


    <!-- Button label to connect to a Wi-Fi network -->
    <string name="wifi_connect">Connect</string>
    <!-- Button label to delete a Wi-Fi network -->
    <string name="wifi_forget">Forget</string>
    <!-- Button label to save a Wi-Fi network configuration -->
    <string name="wifi_save">Save</string>
    <!-- Button label to dismiss the dialog -->
    <string name="wifi_cancel">Cancel</string>

    <!-- Errors reported on wifi settings page -->
    <!-- Toast message indicating WPS overlap detection [CHAR LIMIT=75] -->
    <string name="wifi_wps_overlap_error">Another WiFi protected session was detected. Try again in a few minutes.</string>

    <!-- Wi-Fi Advanced Settings --> <skip />
    <!-- Wi-Fi settings screen, advanced, settings section.  This is a header shown above advanced wifi settings. -->
    <string name="wifi_advanced_titlebar">Advanced WiFi</string>
    <!-- Wi-Fi settings screen, setting title for setting the band [CHAR LIMIT=50]-->
    <string name="wifi_setting_frequency_band_title">WiFi frequency band</string>
    <!-- Wi-Fi settings screen, setting summary for setting the wifi frequency band [CHAR LIMIT=50]-->
    <string name="wifi_setting_frequency_band_summary">Specify the frequency range of operation</string>
    <!-- Wi-Fi settings screen, error message when the frequency band could not be set [CHAR LIMIT=50]. -->
    <string name="wifi_setting_frequency_band_error">There was a problem setting the frequency band.</string>
    <!-- Wi-Fi settings screen, advanced, title of the item to show the Wi-Fi device's MAC address. -->
    <string name="wifi_advanced_mac_address_title">MAC address</string>
    <!-- Title of the screen to adjust IP settings -->
    <!-- Wi-Fi settings screen, advanced, title of the item to show the Wi-Fi device's current IP address. -->
    <string name="wifi_advanced_ip_address_title">IP address</string>

    <!-- Wifi Advanced settings.  Used as a label under the shortcut icon that goes to Wifi advanced settings. [CHAR LIMIT=20]-->
    <string name="wifi_advanced_settings_label">IP settings</string>
    <!-- Menu item to save the IP settings -->
    <string name="wifi_ip_settings_menu_save">Save</string>
    <!-- Menu ietm to cancel the IP settings -->
    <string name="wifi_ip_settings_menu_cancel">Cancel</string>
    <!-- Error message if the IP address is not valid [CHAR LIMIT=50]-->
    <string name="wifi_ip_settings_invalid_ip_address">Type a valid IP address.</string>
    <!-- Error message if the gateway is not valid [CHAR LIMIT=50]-->
    <string name="wifi_ip_settings_invalid_gateway">Type a valid gateway address.</string>
    <!-- Error message if the dns is not valid [CHAR LIMIT=50]-->
    <string name="wifi_ip_settings_invalid_dns">Type a valid DNS address.</string>
    <!-- Error message if the network prefix length is not valid [CHAR LIMIT=50]-->
    <string name="wifi_ip_settings_invalid_network_prefix_length">Type a network prefix length between 0 and 32.</string>
    <!-- Label for the DNS (first one) -->
    <string name="wifi_dns1">DNS 1</string>
    <!-- Hint text for DNS -->
    <string name="wifi_dns1_hint" translatable="false">8.8.8.8</string>
    <!-- Label for the DNS (second one)-->
    <string name="wifi_dns2">DNS 2</string>
    <!-- Hint text for DNS -->
    <string name="wifi_dns2_hint" translatable="false">4.4.4.4</string>
    <!-- Label for the gateway of the network -->
    <string name="wifi_gateway">Gateway</string>
    <!-- Hint text for the gateway -->
    <string name="wifi_gateway_hint" translatable="false">192.168.1.1</string>
    <!-- Label for the network prefix of the network [CHAR LIMIT=25]-->
    <string name="wifi_network_prefix_length">Network prefix length</string>
    <!-- Hint text for network prefix length -->
    <string name="wifi_network_prefix_length_hint" translatable="false">24</string>


    <!-- Wi-Fi p2p / Wi-Fi Direct settings -->
    <!-- Used in the 1st-level settings screen to launch Wi-fi Direct settings [CHAR LIMIT=25] -->
    <string name="wifi_p2p_settings_title">WiFi direct</string>
    <!-- Summary for Wi-fi Direct settings item in the 1st-level settings screen [CHAR LIMIT=50]-->
    <string name="wifi_p2p_settings_summary">Set up peer-to-peer connectivity</string>
    <string name="wifi_p2p_device_info">Device information</string>
    <string name="wifi_p2p_wps_setup">WiFi protected setup</string>
    <string name="wifi_p2p_wps_pin">Type PIN</string>
    <string name="wifi_p2p_persist_network">Remember this connection</string>
    <!-- Menu option to discover peers-->
    <string name="wifi_p2p_menu_search">Search</string>
    <!-- Menu option to create a group-->
    <string name="wifi_p2p_menu_create_group">Create group</string>
    <!-- Menu option to remove a group-->
    <string name="wifi_p2p_menu_remove_group">Remove group</string>
    <!-- Menu option to Wi-Fi p2p advanced settings -->
    <string name="wifi_p2p_menu_advanced">Advanced</string>
    <!-- Title for available p2p devices -->
    <string name="wifi_p2p_available_devices">Available devices</string>

    <!-- Wifi AP settings-->
    <!-- Label for wifi tether checkbox. Toggles Access Point on/off -->
    <string name="wifi_tether_checkbox_text">Portable WiFi hotspot</string>
    <!-- Subtext for wifi tether checkbox on success -->
    <string name="wifi_tether_enabled_subtext">Portable hotspot <xliff:g id="network_ssid">%1$s</xliff:g> active</string>
    <!-- Subtext for wifi tether checkbox on failure -->
    <string name="wifi_tether_failed_subtext">Portable WiFi hotspot error</string>
    <!-- Used to open the ssid and security dialog for Wifi Access Point -->
    <string name="wifi_tether_configure_ap_text">Configure WiFi hotspot</string>
    <!-- Subtext on configuration preference to indicate SSID and security chosen -->
    <string name="wifi_tether_configure_subtext"><xliff:g id="network_ssid">%1$s</xliff:g> <xliff:g id="network_security">%2$s</xliff:g> portable WiFi hotspot</string>
    <!-- Default access point SSID used for tethering -->
    <string name="wifi_tether_configure_ssid_default">AndroidHotspot</string>

    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Wi-Fi Testing on the diagnostic screen-->
    <string name="testing_wifi_info" translatable="false">WiFi information</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager disableNetwork API-->
    <string name="disableNetwork" translatable="false">disableNetwork</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager enableNetwork API-->
    <string name="enableNetwork" translatable="false">enableNetwork</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager disconnect API-->
    <string name="disconnect" translatable="false">disconnect</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager getConfiguredNetworks API-->
    <string name="getConfiguredNetworks" translatable="false">getConfiguredNetworks</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager getConnectionInfo API-->
    <string name="getConnectionInfo" translatable="false">getConnectionInfo</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item on Wifi information screen-->
    <string name="wifi_api_test" translatable="false">WiFi API</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item on Wifi information screen-->
    <string name="wifi_status_test" translatable="false">WiFi status</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Button text on Wifi Status screen-->
    <string name="wifi_update" translatable="false">Refresh stats</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="wifi_state_label" translatable="false">WiFi state:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="network_state_label" translatable="false">Network state:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
        Label on Wifi Status screen-->
    <string name="supplicant_state_label" translatable="false">Supplicant state:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="rssi_label" translatable="false">RSSI:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="bssid_label" translatable="false">BSSID:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="ssid_label" translatable="false">SSID:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="hidden_ssid_label" translatable="false">Hidden SSID:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="ipaddr_label" translatable="false">IPaddr:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="macaddr_label" translatable="false">MAC addr:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="networkid_label" translatable="false">Network ID:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="link_speed_label" translatable="false">Link speed:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="scan_list_label" translatable="false">Scan results:</string>

    <!-- wifi state values-->
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_disabling" translatable="false">Disabling</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_disabled" translatable="false">Disabled</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_enabling" translatable="false">Enabling</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_enabled" translatable="false">Enabled</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_unknown" translatable="false">Unknown</string>

    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item on Wifi information screen-->
    <string name="wifi_config_info" translatable="false">WiFi config</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Configuration screen-->
    <string name="config_list_label" translatable="false">Configured networks</string>

    <!-- Sound and alerts settings -->
    <skip/>
    <!-- Main Settings screen setting option name to go into the display settings screen -->
    <string name="display_settings_title">Display</string>
    <!-- Sound settings screen heading -->
    <string name="sound_settings">Sound</string>
    <!-- Sound settings screen, setting option name checkbox -->
    <string name="silent_mode_title">Silent mode</string>
    <!-- Sound settings screen, setting option name to pick ringtone (a list dialog comes up)-->
    <string name="ringtone_title">Phone ringtone</string>
    <!-- Sound settings screen, setting option summary text -->
    <string name="ringtone_summary">""</string>
    <!-- Sound settings screen, volume title -->
    <string name="all_volume_title">Volumes</string>
    <!-- Sound settings screen, music effects title [CHAR LIMIT=30]-->
    <string name="musicfx_title">Music effects</string>
    <!-- Sound settings screen, setting option name -->
    <string name="ring_volume_title">Ringer volume</string>
    <!-- Sound settings screen, setting option name checkbox -->
    <string name="vibrate_in_silent_title">Vibrate when silent</string>
    <!-- Sound settings screen, setting option name checkbox -->
    <string name="vibrate_title">Vibrate</string>
    <!-- Sound settings screen, setting option name -->
    <string name="notification_sound_title">Default notification</string>
    <!-- Sound settings screen, notification light repeat pulsing title -->
    <string name="notification_pulse_title">Pulse notification light</string>
    <!-- Sound settings screen, the title of the volume bar to adjust the incoming call volume -->
    <string name="incoming_call_volume_title">Ringtone</string>
    <!-- Sound settings screen, the title of the volume bar to adjust the notification volume -->
    <string name="notification_volume_title">Notification</string>
    <!-- Sound settings screen, the caption of the checkbox for having the notification volume be
         the same as the incoming call volume. -->
    <string name="checkbox_notification_same_as_incoming_call">Use incoming call volume for notifications</string>
    <!-- Sound settings screen, setting option title-->
    <string name="notification_sound_dialog_title">Choose notification ringtone</string>
    <!-- Sound settings screen, setting option name -->
    <string name="media_volume_title">Media</string>
    <!-- Sound settings screen, setting option summary text -->
    <string name="media_volume_summary">Set volume for music and videos</string>
    <!-- Sound settings screen, alarm volume slider title -->
    <string name="alarm_volume_title">Alarm</string>
    <!-- Sound settings screen, dock settings summary-->
    <string name="dock_settings_summary">Audio settings for the attached dock</string>
    <!-- Sound settings screen, setting check box label -->
    <string name="dtmf_tone_enable_title">Dial pad touch tones</string>
    <!-- Sound settings screen, setting check box label -->
    <string name="sound_effects_enable_title">Touch sounds</string>
    <!-- Sound settings screen, setting check box label -->
    <string name="lock_sounds_enable_title">Screen lock sound</string>
    <!-- Sound settings screen, setting check box label -->
    <string name="haptic_feedback_enable_title">Vibrate on touch</string>
    <!-- Sound settings screen, setting option name checkbox to enable/disable audio recording features that improve audio recording in noisy environments -->
    <string name="audio_record_proc_title">Noise cancellation</string>
    <!-- Volume description for media volume -->
    <string name="volume_media_description">Music, video, games, &amp; other media</string>
    <!-- Volume description for ringtone and notification volume -->
    <string name="volume_ring_description">Ringtone &amp; notifications</string>
    <!-- Volume description for notification volume -->
    <string name="volume_notification_description">Notifications</string>
    <!-- Volume description for alarm volume -->
    <string name="volume_alarm_description">Alarms</string>

    <!-- Dock settings title, top level -->
    <string name="dock_settings">Dock</string>
    <!-- Dock settings title -->
    <string name="dock_settings_title">Dock settings</string>
    <!-- Dock audio settings -->
    <string name="dock_audio_settings_title">Audio</string>
    <!-- Dock audio summary for docked to desk dock -->
    <string name="dock_audio_summary_desk">Settings for the attached desktop dock</string>
    <!-- Dock audio summary for docked to car dock -->
    <string name="dock_audio_summary_car">Settings for the attached car dock</string>
    <!-- Dock audio summary for undocked -->
    <string name="dock_audio_summary_none" product="tablet">Tablet not docked</string>
    <!-- Dock audio summary for undocked -->
    <string name="dock_audio_summary_none" product="default">Phone not docked</string>
    <!-- Dock audio summary for docked to unknown -->
    <string name="dock_audio_summary_unknown">Settings for the attached dock</string>
    <!-- Dock not found dialog title -->
    <string name="dock_not_found_title">Dock not found</string>
    <!-- Dock not found dialog text -->
    <string name="dock_not_found_text" product="tablet">You must dock the tablet before setting up dock audio.</string>
    <!-- Dock not found dialog text -->
    <string name="dock_not_found_text" product="default">You must dock the phone before setting up dock audio.</string>
    <!-- Dock settings screen, dock events SFX setting check box label -->
    <string name="dock_sounds_enable_title">Dock insert sound</string>
    <!-- Dock settings screen, setting option summary text when check box is selected -->
    <string name="dock_sounds_enable_summary_on" product="tablet">Play sound when inserting or removing tablet from dock</string>
    <!-- Dock settings screen, setting option summary text when check box is selected -->
    <string name="dock_sounds_enable_summary_on" product="default">Play sound when inserting or removing phone from dock</string>
    <!-- Sound settings screen, setting option summary text when check box is clear -->
    <string name="dock_sounds_enable_summary_off" product="tablet">Don\'t play sound when inserting or removing tablet from dock</string>
    <!-- Sound settings screen, setting option summary text when check box is clear -->
    <string name="dock_sounds_enable_summary_off" product="default">Don\'t play sound when inserting or removing phone from dock</string>

    <!-- Acounts & Sync settings screen setting title. This screen will list the different accounts (mail, gmail...) used on that phone and their sync settings -->
    <string name="sync_settings">Accounts &amp; sync</string>

    <!-- Main Settings screen, setting option name to go into search settings -->
    <string name="search_settings">Search</string>
    <!-- Main Settings screen, setting option summary to go into search settings -->
    <string name="search_settings_summary">Manage search settings and history</string>

    <!-- Display settings --><skip/>
    <!-- Sound & display settings screen, section header for settings related to display -->
    <string name="display_settings">Display</string>
    <!-- Sound & display settings screen, accelerometer-based rotation check box label -->
    <string name="accelerometer_title">Auto-rotate screen</string>
    <!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is selected -->
    <string name="accelerometer_summary_on" product="tablet">Switch orientation automatically when rotating tablet</string>
    <!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is selected -->
    <string name="accelerometer_summary_on" product="default">Switch orientation automatically when rotating phone</string>
    <!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is clear -->
    <string name="accelerometer_summary_off" product="tablet">Switch orientation automatically when rotating tablet</string>
    <!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is clear -->
    <string name="accelerometer_summary_off" product="default">Switch orientation automatically when rotating phone</string>
    <!-- Sound & display settings screen, setting option name to change brightness -->
    <string name="brightness">Brightness</string>
    <!-- Sound & display settings screen, setting option summary to change brightness -->
    <string name="brightness_summary">Adjust the brightness of the screen</string>
    <!-- Sound & display settings screen, setting option name to change screen timeout -->
    <string name="screen_timeout">Sleep</string>
    <!-- Sound & display settings screen, setting option summary to change screen timeout -->
    <string name="screen_timeout_summary">After <xliff:g id="timeout_description">%1$s</xliff:g> of inactivity</string>
    <!-- Wallpaper settings title [CHAR LIMIT=30] -->
    <string name="wallpaper_settings_title">Wallpaper</string>
    <!-- Wallpaper settings fragment title [CHAR LIMIT=30] -->
    <string name="wallpaper_settings_fragment_title">Choose wallpaper from</string>
    <!-- Display settings screen, trigger for screen saver options -->
    <string name="dream_settings_title">Android Dreams</string>
    <!-- Display settings screen, summary for screen saver options -->
    <string name="dream_settings_summary">Screen savers and other idle diversions</string>
    <!-- Screen saver settings, setting option name to select a module -->
    <string name="dream_component_title">Selected dream</string>
    <!-- Screen saver settings, setting option name to change activation timeout -->
    <string name="dream_timeout_title">When to activate</string>
    <!-- Screen saver settings, setting option summary to change activation timeout -->
    <string name="dream_timeout_summary">After <xliff:g id="timeout_description">%1$s</xliff:g> spent idle</string>
    <!-- Screen saver settings, setting option summary to change activation timeout, shown when disabled -->
    <string name="dream_timeout_zero_summary">Never</string>
    <!-- Screen saver settings, button allowing the user to test/try the current module -->
    <string name="dream_test">Try it!</string>
    <!-- Sound & display settings screen, setting option name to change whether the screen adjusts automatically based on lighting conditions -->
    <string name="automatic_brightness">Automatic brightness</string>
    <!-- [CHAR LIMIT=30] Sound & display settings screen, setting option name to change font size -->
    <string name="title_font_size">Font size</string>
    <!-- Sound & display settings screen, setting option summary displaying the currently selected font size -->
    <string name="summary_font_size" translatable="false">%1$s</string>
    <!-- [CHAR LIMIT=40] Sound & display settings screen, title of dialog for picking font size -->
    <string name="dialog_title_font_size">Font size</string>

    <!-- SIM lock settings title -->
    <string name="sim_lock_settings">SIM card lock settings</string>
    <!-- Security & location settings screen, setting option name -->
    <string name="sim_lock_settings_category">Set up SIM card lock</string>
    <!-- Security & location settings screen, section heading for settings related to sim card locking -->
    <string name="sim_lock_settings_title">SIM card lock</string>
    <!-- SIM card lock settings screen, setting check box label -->
    <string name="sim_pin_toggle">Lock SIM card</string>
    <!-- SIM card lock settings screen, setting option summary text when SIM lock check box is selected -->
    <string name="sim_lock_on" product="tablet">Require PIN to use tablet</string>
    <!-- SIM card lock settings screen, setting option summary text when SIM lock check box is selected -->
    <string name="sim_lock_on" product="default">Require PIN to use phone</string>
    <!-- SIM card lock settings screen, setting option summary text when SIM lock check box is clear -->
    <string name="sim_lock_off" product="tablet">Require PIN to use tablet</string>
    <!-- SIM card lock settings screen, setting option summary text when SIM lock check box is clear -->
    <string name="sim_lock_off" product="default">Require PIN to use phone</string>
    <!-- SIM card lock settings screen, setting option name to change the SIM PIN -->
    <string name="sim_pin_change">Change SIM PIN</string>
    <!-- SIM card lock settings screen, SIM PIN dialog message instruction -->
    <string name="sim_enter_pin">SIM PIN</string>
    <!-- SIM card lock settings screen, SIM PIN dialog message instruction -->
    <string name="sim_enable_sim_lock">Lock SIM card</string>
    <!-- SIM card lock settings screen, SIM PIN dialog message instruction -->
    <string name="sim_disable_sim_lock">Unlock SIM card</string>
    <!-- SIM card lock settings screen, SIM PIN dialog message instruction -->
    <string name="sim_enter_old">Old SIM PIN</string>
    <!-- SIM card lock settings screen, SIM PIN dialog message instruction -->
    <string name="sim_enter_new">New SIM PIN</string>
    <string name="sim_reenter_new">Re-type new PIN</string>
    <!-- SIM card lock settings screen, SIM PIN dialog message instruction -->
    <string name="sim_change_pin">SIM PIN</string>
    <!-- SIM card lock settings screen, SIM PIN dialog message when wrong PIN is entered -->
    <string name="sim_bad_pin">Incorrect PIN</string>
    <!-- SIM card lock settings screen, SIM PIN dialog message when PINs don't match -->
    <string name="sim_pins_dont_match">PINs don\'t match</string>
    <!-- SIM card lock settings screen, toast after not entering correct SIM PIN -->
    <string name="sim_change_failed">Can\'t change PIN.\nPossibly incorrect PIN.</string>
    <!-- SIM card lock settings screen, SIM PIN dialog message when the entered PIN is correct-->
    <string name="sim_change_succeeded">SIM PIN changed successfully</string>
    <!-- SIM card lock settings screen, toast after not entering correct SIM PIN -->
    <string name="sim_lock_failed">Can\'t change SIM card lock state.\nPossibly incorrect PIN.</string>
    <!-- SIM card lock settings screen, SIM PIN dialog button labels: -->
    <string name="sim_enter_ok">OK</string>
    <!-- SIM card lock settings screen, SIM PIN dialog button labels: -->
    <string name="sim_enter_cancel">Cancel</string>

    <!-- Advanced (used for diagnostics) device info activity title -->
    <string name="device_info_settings" product="tablet">Tablet status</string>
    <!-- Advanced (used for diagnostics) device info activity title -->
    <string name="device_info_settings" product="default">Phone status</string>

    <!-- About phone screen, list item title.  Takes the user to the screen for seeing and installing system updates. -->
    <string name="system_update_settings_list_item_title">System updates</string>
    <!-- About phone screen, list item summary.  Takes the user to the screen for seeing and installing system updates. -->
    <string name="system_update_settings_list_item_summary">""</string>

    <!-- About phone screen, status item label -->
    <string name="firmware_version">Android version</string>
    <!-- About phone screen, status item label-->
    <string name="model_number">Model number</string>
    <!-- About phone screen,  setting option name-->
    <string name="baseband_version">Baseband version</string>
    <!-- About phone screen,  setting option name-->
    <string name="kernel_version">Kernel version</string>
    <!-- About phone screen,  setting option name-->
    <string name="build_number">Build number</string>

    <!-- About phone screen, show when a value of some status item is unavailable. -->
    <string name="device_info_not_available">Not available</string>
    <!-- About phone screen, phone status screen title -->
    <string name="device_status_activity_title">Status</string>
    <!-- About phone screen, title of the item to go into the Phone status screen -->
    <string name="device_status">Status</string>
    <!-- About tablet screen, summary of the item that takes you to tablet status screen -->
    <string name="device_status_summary" product="tablet">Status of the battery, network, and other information</string>
    <!-- About phone screen, summary of the item to go into the phone status screen -->
    <string name="device_status_summary" product="default">Phone number, signal, etc.</string>
    <!-- Main settings screen item's title to go into the storage settings screen [CHAR LIMIT=25] -->
    <string name="storage_settings" >Storage</string>
    <!-- Storage settings screen title -->
    <string name="storage_settings_title">Storage settings</string>
    <!-- [CHAR LIMIT=100] Main settings screen item's summary for the SD card and storage settings -->
    <string name="storage_settings_summary" product="nosdcard">Unmount USB storage, view available storage</string>
    <!-- [CHAR LIMIT=100] Main settings screen item's summary for the SD card and storage settings -->
    <string name="storage_settings_summary" product="default">Unmount SD card, view available storage</string>
    <!-- Do not translate. About phone, status item title -->
    <string name="status_imei">IMEI</string>
    <!-- Do not translate. About phone, status item title -->
    <string name="status_imei_sv">IMEI SV</string>
    <!-- About tablet, status item title.  The Mobile Directory Number [CHAR LIMIT=30] -->
    <string name="status_number" product="tablet">MDN</string>
    <!-- About phone, status item title.  The phone number of the current device [CHAR LIMIT=30] -->
    <string name="status_number" product="default">My phone number</string>
    <!-- About phone, status item title.  The phone MIN number of the current device.-->
    <string name="status_min_number">MIN</string>
    <!-- About phone, status item title.  The phone MSID number of the current device.-->
    <string name="status_msid_number">MSID</string>
    <!-- About phone, status item title.  The phone PRL Version of the current device.-->
    <string name="status_prl_version">PRL Version</string>
    <!-- About phone, status item title.  The phone MEID number of the current LTE/CDMA device. [CHAR LIMIT=30] -->
    <string name="status_meid_number">MEID</string>
    <!-- About phone, status item title.  The ICCID of the current LTE device. [CHAR LIMIT=30] -->
    <string name="status_icc_id">ICCID</string>
    <!-- About phone, status item title for the type of data phone network we're connected to, for example 3G or Edge or GPRS -->
    <string name="status_network_type">Mobile network type</string>
    <!-- About phone, status item title. The status of data access.  For example, the value may be "Connected" -->
    <string name="status_data_state">Mobile network state</string>
    <!-- About phone, status item title. The status of whether we have service.  for example, the value may be "In service" -->
    <string name="status_service_state">Service state</string>
    <!-- About phone, status item title. The  current cell tower signal strength -->
    <string name="status_signal_strength">Signal strength</string>
    <!-- About phone, status item title, The status for roaming.  For example, the value might be "Not roaming" -->
    <string name="status_roaming">Roaming</string>
    <!-- About phone, status item title. The cell carrier that the user is connected to.  -->
    <string name="status_operator">Network</string>
    <!-- About phone, status item title.  The MAC address of the Wi-Fi network adapter. -->
    <string name="status_wifi_mac_address">WiFi MAC address</string>
    <!-- About phone, status item title.  The bluetooth adapter's hardware address-->
    <string name="status_bt_address">Bluetooth address</string>
    <!-- About phone, status item title.  The hardware serial number. [CHAR LIMIT=30]-->
    <string name="status_serial_number">Serial number</string>
    <!-- About phone, status item value if the actual value is not available. -->
    <string name="status_unavailable">Unavailable</string>
    <!-- About phone, status item title.  How long the device has been running since its last reboot. -->
    <string name="status_up_time">Up time</string>
    <!-- About phone, status item title.  How much time the device has had its main CPU awake. -->
    <string name="status_awake_time">Awake time</string>
    <!-- SD card & phone storage settings screen heading. This is displayed above items that pertain to the phone's internal storage  -->
    <string name="internal_memory">Internal storage</string>
    <!-- SD card & phone storage settings screen heading. This is displayed above items that pertain to the SD card [CHAR LIMIT=30] -->
    <string name="sd_memory" product="nosdcard">USB storage</string>
    <!-- SD card & phone storage settings screen heading. This is displayed above items that pertain to the SD card -->
    <string name="sd_memory" product="default">SD card</string>
    <!-- SD card & phone storage settings title. The amount of free space for some storage partition.  For example, this is listed under both the "Internal phone storage" section and the "SD card" section. -->
    <string name="memory_available">Available</string>
    <!-- SD card & phone storage settings screen heading.  The total amount of storage space for some storage partition.  For example, this is listed under both the "Internal phone storage" section and the "SD card" section -->
    <string name="memory_size">Total space</string>
    <!-- SD card & phone storage settings summary. Displayed when the total memory usage is being calculated. Will be replaced with a number like "12.3 GB" when finished calucating. [CHAR LIMIT=30] -->
    <string name="memory_calculating_size">Calculating…</string>
    <!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of applications installed. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
    <string name="memory_apps_usage">Apps</string>
    <!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of media on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
    <string name="memory_media_usage">Media</string>
    <!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of /sdcard/Download on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
    <string name="memory_downloads_usage">Downloads</string>
    <!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of all pictures, videos in /sdcard/DCIM, /sdcard/Pictures folders on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
    <string name="memory_dcim_usage">Pictures, videos</string>
    <!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of audio files in /sdcard on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
    <string name="memory_music_usage">Audio (music, ringtones, podcasts, etc.)</string>
    <!-- SD card & phone storage settings title. Displayed as a title when showing the total usage of misc files on the device. Below it will be a number like "123.4 MB" indicating used storage. [CHAR LIMIT=50] -->
    <string name="memory_media_misc_usage">Misc.</string>
    <!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card.  This will be done before the user phyiscally removes the SD card from the phone.  Kind of like the "Safely remove" on some operating systems.   [CHAR LIMIT=25] -->
    <string name="sd_eject" product="nosdcard">Unmount shared storage</string>
    <!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card.  This will be done before the user phyiscally removes the SD card from the phone.  Kind of like the "Safely remove" on some operating systems.   -->
    <string name="sd_eject" product="default">Unmount SD card</string>
    <!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card.  This will be done before the user phyiscally removes the SD card from the phone.  Kind of like the "Safely remove" on some operating systems.   [CHAR LIMIT=30] -->
    <string name="sd_eject_summary" product="nosdcard">Unmount the internal USB storage</string>
    <!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card.  This will be done before the user phyiscally removes the SD card from the phone.  Kind of like the "Safely remove" on some operating systems.   -->
    <string name="sd_eject_summary" product="default">Unmount the SD card so you can safely remove it</string>
    <!-- SD card & phone storage settings item title for toggling PTP mode on and off.  When PTP mode is on the device will appear on the USB bus as a PTP camera device instead of an MTP music player.   -->

    <!-- SD card & phone storage settings item summary that is displayed when no SD card is inserted.  This version of the string can probably never come up on current hardware. [CHAR LIMIT=25] -->
    <string name="sd_insert_summary" product="nosdcard">Insert USB storage for mounting</string>
    <!-- SD card & phone storage settings item summary that is displayed when no SD card is inserted -->
    <string name="sd_insert_summary" product="default">Insert an SD card for mounting</string>

    <!-- Storage setting item that will mount USB storage if it unmounted. A user should never see this. [CHAR LIMIT=25] -->
    <string name="sd_mount" product="nosdcard">Mount USB storage</string>
    <!-- SD card & phone storage settings item title that will result in the phone mounting the SD card. -->
    <string name="sd_mount" product="default">Mount SD card</string>

    <!-- Subtext for Mount USB storage in Storage settings. User should never see this since we use automount. -->
    <string name="sd_mount_summary" product="nosdcard"></string>
    <!-- Subtext for Mount SD Card in Storage settings. User should never see this since we use automount. -->
    <string name="sd_mount_summary" product="default"></string>
    <!-- SD card & phone storage settings item title that will result in the phone formatting the USB storage.   [CHAR LIMIT=25] -->
    <string name="sd_format" product="nosdcard">Erase USB storage</string>
    <!-- SD card & phone storage settings item title that will result in the phone formatting the SD card.   [CHAR LIMIT=25] -->
    <string name="sd_format" product="default">Erase SD card</string>
    <!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card.   [CHAR LIMIT=80] -->
    <string name="sd_format_summary" product="nosdcard">Erases all data on the internal USB storage, such as music and photos</string>
    <!-- SD card & phone storage settings item title that will result in the phone unmounting the SD card.   [CHAR LIMIT=80] -->
    <string name="sd_format_summary" product="default">Erases all data on the SD card, such as music and photos</string>
    <!-- SD card status when it is mounted as read only. Will be appended to size, starts with an unbreakable space -->
    <string name="read_only">\u0020(Read-only)</string>
    <!-- SD card eject confirmation dialog title   [CHAR LIMIT=25] -->
    <string name="dlg_confirm_unmount_title" product="nosdcard">Unmount USB storage?</string>
    <!-- SD card eject confirmation dialog title   -->
    <string name="dlg_confirm_unmount_title" product="default">Unmount SD card?</string>
    <!-- SD card eject confirmation dialog  [CHAR LIMIT=NONE] -->
    <string name="dlg_confirm_unmount_text" product="nosdcard">If you unmount the USB storage, some apps you are using will stop and may be unavailable until you remount the USB storage.</string>
    <!-- SD card eject confirmation dialog  -->
    <string name="dlg_confirm_unmount_text" product="default">If you unmount the SD card, some apps you are using will stop and may be unavailable until you remount the SD card.</string>
    <!-- SD card eject error dialog title   [CHAR LIMIT=30] -->
    <string name="dlg_error_unmount_title" product="nosdcard"></string>
    <!-- SD card eject error dialog title   -->
    <string name="dlg_error_unmount_title" product="default"></string>
    <!-- SD card eject error dialog text   [CHAR LIMIT=NONE] -->
    <string name="dlg_error_unmount_text" product="nosdcard">Couldn\'t unmount USB storage. Try again later.</string>
    <!-- SD card eject error dialog text   -->
    <string name="dlg_error_unmount_text" product="default">Couldn\'t unmount SD card. Try again later.</string>
    <!-- SD card unmount informative text   [CHAR LIMIT=NONE] -->
    <string name="unmount_inform_text" product="nosdcard">USB storage will be unmounted.</string>
    <!-- SD card unmount informative text   [CHAR LIMIT=NONE] -->
    <string name="unmount_inform_text" product="default">SD card will be unmounted.</string>
    <!-- SD card eject progress title   -->
    <string name="sd_ejecting_title">Unmounting</string>
    <!-- SD card eject progress text   -->
    <string name="sd_ejecting_summary">Unmount in progress</string>

    <!-- Storage setting.  Menu option for USB transfer settings [CHAR LIMIT=30]-->
    <string name="storage_menu_usb">USB computer connection</string>
    <!-- Storage setting.  Title for USB transfer settings [CHAR LIMIT=30]-->
    <string name="storage_title_usb">USB computer connection</string>
    <!-- Storage setting.  USB connection category [CHAR LIMIT=30]-->
    <string name="usb_connection_category">Connect as</string>
    <!-- Storage setting.  Title for MTP checkbox [CHAR LIMIT=30]-->
    <string name="usb_mtp_title">Media device (MTP)</string>
    <!-- Storage setting.  Summary for MTP checkbox [CHAR LIMIT=NONE]-->
    <string name="usb_mtp_summary">Lets you transfer media files on Windows, or using Android File Transfer on Mac (see www.android.com/filetransfer)</string>
    <!-- Storage setting.  Title for PTP checkbox [CHAR LIMIT=30]-->
    <string name="usb_ptp_title">Camera (PTP)</string>
    <!-- Storage setting.  Label for installer CD [CHAR LIMIT=30]-->
    <string name="usb_ptp_summary">Lets you transfer photos using camera software, and transfer any files on computers that don\'t support MTP</string>
    <!-- Storage setting.  Summary for PTP checkbox [CHAR LIMIT=NONE]-->
    <string name="usb_label_installer_cd">"Install file-transfer tools"</string>

    <!-- Phone info screen, section titles: -->
    <string name="battery_status_title">Battery status</string>
    <!-- Phone info screen, section titles: -->
    <string name="battery_level_title">Battery level</string>

    <!-- APN Settings -->
    <!-- APN settings screen title -->
    <string name="apn_settings">APNs</string>
    <!-- Screen title after user selects APNs setting option -->
    <string name="apn_edit">Edit access point</string>
    <!-- Edit access point label summary text when no value has been set -->
    <string name="apn_not_set">Not set</string>
    <!-- Edit access point labels: A label the user can give to the APN to allow him to differentiate it from the others -->
    <string name="apn_name">Name</string>
    <!-- Edit access point labels: The actual access point name-->
    <string name="apn_apn">APN</string>
    <!-- Edit access point labels: The addess of the proxy to use for this APN -->
    <string name="apn_http_proxy">Proxy</string>
    <!-- Edit access point labels: The port number of the proxy to use for this APN -->
    <string name="apn_http_port">Port</string>
    <!-- Edit access point labels: The username that will be used when conencting to this APN-->
    <string name="apn_user">Username</string>
    <!-- Edit access point labels: The password that will be used when connecting to this APN -->
    <string name="apn_password">Password</string>
    <!-- Edit access point labels: The server address to conenct to for this APN -->
    <string name="apn_server">Server</string>
    <!-- Edit access point labels: -->
    <string name="apn_mmsc">MMSC</string>
    <!-- Edit access point labels: The proxy to use for MMS (multimedia messages)-->
    <string name="apn_mms_proxy">MMS proxy</string>
    <!-- Edit access point labels: The port on the proxy used for MMS-->
    <string name="apn_mms_port">MMS port</string>
    <!-- Edit access point labels: -->
    <string name="apn_mcc">MCC</string>
    <!-- Edit access point labels: -->
    <string name="apn_mnc">MNC</string>
    <!-- Edit acces  point labels: Authenticaton type-->
    <string name="apn_auth_type">Authentication type</string>
    <!-- Authentication Typs: None -->
    <string name="apn_auth_type_none">None</string>
    <!-- Authentication Typs: PAP -->
    <string name="apn_auth_type_pap">PAP</string>
    <!-- Authentication Typs: CHAP -->
    <string name="apn_auth_type_chap">CHAP</string>
    <!-- Authentication Typs: PAP or CHAP -->
    <string name="apn_auth_type_pap_chap">PAP or CHAP</string>
    <!-- Edit access point labels: The type of APN -->
    <string name="apn_type">APN type</string>
    <!-- Edit access point labels: The protocol of the APN, e.g., "IPv4", "IPv6", or "IPv4/IPv6". -->
    <string name="apn_protocol">APN protocol</string>
    <!-- Edit access point labels: The protocol of the APN when roaming, e.g., "IPv4", "IPv6", or "IPv4/IPv6". -->
    <string name="apn_roaming_protocol">APN roaming protocol</string>
    <!-- Edit enable/disable of APN -->
    <string name="carrier_enabled">APN enable/disable</string>
    <string name="carrier_enabled_summaryOn">APN enabled</string>
    <string name="carrier_enabled_summaryOff">APN disabled</string>
    <!-- Edit Beaerer Info of APN -->
    <string name="bearer">Bearer</string>
    <!-- Edit access point screen menu option to delete this APN -->
    <string name="menu_delete">Delete APN</string>
    <!-- APNs screen menu option to create a brand spanking new APN -->
    <string name="menu_new">New APN</string>
    <!-- Edit access point screen menu option to save the user's changes for this APN to the persistent storage -->
    <string name="menu_save">Save</string>
    <!-- Edit access point screen menu option to discard the user's changes for this APN -->
    <string name="menu_cancel">Discard</string>
    <!-- APN error dialog title -->
    <string name="error_title"></string>
    <!-- APN error dialog messages: -->
    <string name="error_name_empty">The Name field can\'t be empty.</string>
    <!-- APN error dialog messages: -->
    <string name="error_apn_empty">The APN can\'t be empty.</string>
    <!-- APN error dialog messages: -->
    <string name="error_mcc_not3">MCC field must be 3 digits.</string>
    <!-- APN error dialog messages: -->
    <string name="error_mnc_not23">MNC field must be 2 or 3 digits.</string>
    <!-- The message of dialog indicated restoring default APN settings in progress -->
    <string name="restore_default_apn">Restoring default APN settings.</string>
    <!-- APNs screen menu option to reset default APN settings -->
    <string name="menu_restore">Reset to default</string>
    <!-- APNs screen toast message to inform reset default APN settings is completed -->
    <string name="restore_default_apn_completed">Reset default APN settings completed.</string>

    <!-- Master Clear -->
    <!-- SD card & phone storage settings screen, setting option name under Internal phone storage heading -->
    <string name="master_clear_title">Factory data reset</string>
    <!-- SD card & phone storage settings screen, setting option summary text under Internal phone storage heading -->
    <string name="master_clear_summary" product="tablet">Erases all data on tablet</string>
    <!-- SD card & phone storage settings screen, setting option summary text under Internal phone storage heading -->
    <string name="master_clear_summary" product="default">Erases all data on phone</string>
    <!-- SD card & phone storage settings screen, message on screen after user selects Factory data reset [CHAR LIMIT=NONE] -->
    <string name="master_clear_desc" product="tablet">"This will erase all data from your tablet\'s <b>internal storage</b>, including:\n\n<li>Your Google account</li>\n<li>System and app data and settings</li>\n<li>Downloaded apps</li>"</string>
    <!-- SD card & phone storage settings screen, message on screen after user selects Factory data reset [CHAR LIMIT=NONE] -->
    <string name="master_clear_desc" product="default">"This will erase all data from your phone\'s <b>internal storage</b>, including:\n\n<li>Your Google account</li>\n<li>System and app data and settings</li>\n<li>Downloaded apps"</li></string>
    <!-- SD card & phone storage settings screen, instructions and list of current accounts.  The list of accounts follows this text[CHAR LIMIT=NONE] -->
    <string name="master_clear_accounts" product="default">"\n\nYou are currently signed into the following accounts:\n"</string>
    <!-- SD card & phone storage settings screen, list of items in user data storage (USB storage or SD card) that will be erased during this operation [CHAR LIMIT=NONE] -->
    <string name="master_clear_desc_also_erases_external">"<li>Music</li>\n<li>Photos</li>\n<li>Other user data</li>"</string>
    <!-- SD card & phone storage settings screen, instructions about whether to also erase the external storage (SD card) when erasing the internal storage [CHAR LIMIT=NONE] -->
    <string name="master_clear_desc_erase_external_storage" product="nosdcard">"\n\nTo clear music, pictures, and other user data, the <b>USB storage</b> needs to be erased."</string>
    <!-- SD card & phone storage settings screen, instructions about whether to also erase the external storage (SD card) when erasing the internal storage [CHAR LIMIT=NONE] -->
    <string name="master_clear_desc_erase_external_storage" product="default">"\n\nTo clear music, pictures, and other user data, the <b>SD card</b> needs to be erased."</string>
    <!-- SD card & phone storage settings screen, label for check box to erase USB storage [CHAR LIMIT=30] -->
    <string name="erase_external_storage" product="nosdcard">Erase USB storage</string>
    <!-- SD card & phone storage settings screen, label for check box to erase SD card [CHAR LIMIT=30] -->
    <string name="erase_external_storage" product="default">Erase SD card</string>
    <!-- SD card & phone storage settings screen, description for check box to erase USB storage [CHAR LIMIT=NONE] -->
    <string name="erase_external_storage_description" product="nosdcard">Erase all the data on the internal USB storage, such as music or photos</string>
    <!-- SD card & phone storage settings screen, description for check box to erase USB storage [CHAR LIMIT=NONE] -->
    <string name="erase_external_storage_description" product="default">Erase all the data on the SD card, such as music or photos</string>
    <!-- SD card & phone storage settings screen, button on screen after user selects Factory data reset -->
    <string name="master_clear_button_text" product="tablet">Reset tablet</string>
    <!-- SD card & phone storage settings screen, button on screen after user selects Factory data reset -->
    <string name="master_clear_button_text" product="default">Reset phone</string>
    <!-- SD card & phone storage settings screen, message on screen after user selects Reset phone button -->
    <string name="master_clear_final_desc">Erase all your personal information and downloaded apps? You can\'t reverse this action!</string>
    <!-- SD card & phone storage settings screen, button on screen after user selects Reset phone button -->
    <string name="master_clear_final_button_text">Erase everything</string>
    <!-- Message to draw an unlock pattern before clearing the device -->
    <string name="master_clear_gesture_prompt">Draw your unlock pattern</string>
    <!-- Explanation of drawing unlockp attern to reset phone -->
    <string name="master_clear_gesture_explanation">You must draw your unlock pattern to confirm a factory data reset.</string>
    <!-- Master clear failed message -->
    <string name="master_clear_failed">No reset was performed because the System Clear service isn\'t available.</string>
    <!-- Master clear confirmation screen title [CHAR LIMIT=30] -->
    <string name="master_clear_confirm_title">Reset?</string>

    <!-- Media Format -->
    <!-- SD card & phone storage settings screen, setting option name under Internal phone storage heading [CHAR LIMIT=25] -->
    <string name="media_format_title" product="nosdcard">Erase USB storage</string>
    <!-- SD card & phone storage settings screen, setting option name under Internal phone storage heading -->
    <string name="media_format_title" product="default">Erase SD card</string>
    <!-- SD card & phone storage settings screen, setting option summary text under Internal phone storage heading [CHAR LIMIT=30] -->
    <string name="media_format_summary" product="nosdcard">Erases all data in USB storage</string>
    <!-- SD card & phone storage settings screen, setting option summary text under Internal phone storage heading -->
    <string name="media_format_summary" product="default">Erases all data on the SD card</string>
    <!-- SD card & phone storage settings screen, message on screen after user selects Factory data reset [CHAR LIMIT=NONE] -->
    <string name="media_format_desc" product="nosdcard">Erase all USB storage? You will lose <b>all</b> stored data!</string>
    <!-- SD card & phone storage settings screen, message on screen after user selects Factory data reset [CHAR LIMIT=NONE] -->
    <string name="media_format_desc" product="default">Erase the SD card? You will lose <b>all</b> data on the card!</string>
    <!-- SD card & phone storage settings screen, button on screen after user selects Factory data reset [CHAR LIMIT=25] -->
    <string name="media_format_button_text" product="nosdcard">Erase USB storage</string>
    <!-- SD card & phone storage settings screen, button on screen after user selects Factory data reset -->
    <string name="media_format_button_text" product="default">Erase SD card</string>
    <!-- SD card & phone storage settings screen, message on screen after user selects Format media button [CHAR LIMIT=NONE] -->
    <string name="media_format_final_desc" product="nosdcard">Erase the USB storage, deleting all files stored there? You can\'t reverse this action!</string>
    <!-- SD card & phone storage settings screen, message on screen after user selects Format media button [CHAR LIMIT=NONE] -->
    <string name="media_format_final_desc" product="default">Erase the SD card, deleting all files stored there? You can\'t reverse this action!</string>
    <!-- SD card & phone storage settings screen, button on screen after user selects Format media button -->
    <string name="media_format_final_button_text">Erase everything</string>
    <!-- Message to draw an unlock pattern before clearing the device -->
    <string name="media_format_gesture_prompt">Draw your unlock pattern</string>
    <!-- Explanation of drawing unlock pattern to format card [CHAR LIMIT=NONE] -->
    <string name="media_format_gesture_explanation" product="nosdcard">You must draw your unlock pattern to confirm that you want to erase the USB storage.</string>
    <!-- Explanation of drawing unlock pattern to format card [CHAR LIMIT=NONE] -->
    <string name="media_format_gesture_explanation" product="default">You must draw your unlock pattern to confirm that you want to erase the SD card.</string>

    <!-- Main settings screen, Call settings title for item to go into the call settings -->
    <string name="call_settings_title">Call settings</string>
    <!-- Main settings screen, Call settings summary for item to go into call settings -->
    <string name="call_settings_summary">Set up voicemail, call forwarding, call waiting, caller ID</string>

    <!-- Tethering controls, item title to go into the tethering settings -->
    <!-- Tethering controls, item title to go into the tethering settings when only USB tethering is available [CHAR LIMIT=25]-->
    <string name="tether_settings_title_usb">USB tethering</string>
    <!-- Tethering controls, item title to go into the tethering settings when only Wifi tethering is available [CHAR LIMIT=25]-->
    <string name="tether_settings_title_wifi">Portable hotspot</string>
    <!-- Tethering controls, item title to go into the tethering settings when only Bluetooth tethering is available [CHAR LIMIT=25]-->
    <string name="tether_settings_title_bluetooth">Bluetooth tethering</string>
    <!-- Tethering controls, item title to go into the tethering settings when USB and Bluetooth tethering are available [CHAR LIMIT=25]-->
    <string name="tether_settings_title_usb_bluetooth">Tethering</string>
    <!-- Tethering controls, item title to go into the tethering settings when USB, Bluetooth and Wifi tethering are available [CHAR LIMIT=25]-->
    <string name="tether_settings_title_all">Tethering &amp; portable hotspot</string>

    <!-- USB Tethering options -->
    <string name="usb_title">USB</string>
    <string name="usb_tethering_button_text">USB tethering</string>
    <!-- USB available subtext - shown when USB is connected but not currently being tethered -->
    <string name="usb_tethering_available_subtext">USB connected, check to tether</string>
    <!-- USB tethered subtext - shown when USB is connected and being tethered -->
    <string name="usb_tethering_active_subtext">Tethered</string>
    <!-- USB storage subtext - shown when tethering is disabled because USB storage is active -->
    <string name="usb_tethering_storage_active_subtext">Can\'t tether when USB storage is in use</string>
    <!-- USB unavailable subtext - shown when USB is not connected -->
    <string name="usb_tethering_unavailable_subtext">USB not connected</string>
    <!-- USB errored subtext - shown when USB is broken for some reason -->
    <string name="usb_tethering_errored_subtext">USB tethering error</string>

    <!-- Bluetooth Tethering settings-->
    <!-- Label for bluetooth tether checkbox [CHAR LIMIT=25]-->
    <string name="bluetooth_tether_checkbox_text">Bluetooth tethering</string>
    <!-- Bluetooth available subtext - shown when Bluetooth tethering is turned on but it is not currently tethered to any devices [CHAR LIMIT=50]-->
    <string name="bluetooth_tethering_available_subtext" product="tablet">Sharing this tablet\'s Internet connection</string>
    <!-- Bluetooth available subtext - shown when Bluetooth tethering is turned on but it is not currently tethered to any devices [CHAR LIMIT=50]-->
    <string name="bluetooth_tethering_available_subtext" product="default">Sharing this phone\'s Internet connection</string>
    <!-- Bluetooth connected subtext - shown when a device is tethered over Bluetooth [CHAR LIMIT=60]-->
    <string name="bluetooth_tethering_device_connected_subtext" product="tablet">Sharing this tablet\'s Internet connection to 1 device</string>
    <!-- Bluetooth connected subtext - shown when a device is tethered over Bluetooth [CHAR LIMIT=60]-->
    <string name="bluetooth_tethering_device_connected_subtext" product="default">Sharing this phone\'s Internet connection to 1 device</string>
    <!-- Bluetooth connected subtext - shown when multiple devices are tethered over Bluetooth [CHAR LIMIT=60]-->
    <string name="bluetooth_tethering_devices_connected_subtext" product="tablet">Sharing this tablet\'s Internet connection to <xliff:g id="connectedDeviceCount">%1$d</xliff:g> devices</string>
    <!-- Bluetooth connected subtext - shown when multiple devices are tethered over Bluetooth [CHAR LIMIT=60]-->
    <string name="bluetooth_tethering_devices_connected_subtext" product="default">Sharing this phone\'s Internet connection to <xliff:g id="connectedDeviceCount">%1$d</xliff:g> devices</string>
    <!-- Bluetooth tethering off subtext - shown when Bluetooth Tethering is turned off [CHAR LIMIT=50]-->
    <string name="bluetooth_tethering_off_subtext" product="tablet">Not sharing this tablet\'s Internet connection</string>
    <!-- Bluetooth tethering off subtext - shown when Bluetooth Tethering is turned off [CHAR LIMIT=50]-->
    <string name="bluetooth_tethering_off_subtext" product="default">Not sharing this phone\'s Internet connection</string>
    <!-- Bluetooth errored subtext - shown when Bluetooth is broken for some reason [CHAR LIMIT=50]-->
    <string name="bluetooth_tethering_errored_subtext">Not tethered</string>
    <!-- Bluetooth Tethering settings. Error message shown when trying to connect an 8th device [CHAR LIMIT=50]-->
    <string name="bluetooth_tethering_overflow_error">Can\'t tether to more than <xliff:g id="maxConnection">%1$d</xliff:g> devices.</string>
    <!-- Bluetooth Tethering settings.  Message for untethering from a bluetooth device [CHAR LIMIT=50]-->
    <string name="bluetooth_untether_blank"><xliff:g id="device_name">%1$s</xliff:g> will be untethered.</string>

    <!-- Tethering help button - calls up a web view with general tethering info -->
    <string name="tethering_help_button_text">Help</string>

    <!-- Wireless controls, item title to go into the network settings -->
    <string name="network_settings_title">Mobile networks</string>

    <!-- Security & location settings screen, section header for settings relating to location -->
    <string name="location_title">My Location</string>
    <!-- [CHAR LIMIT=30] Security & location settings screen, setting check box label for Google location service (cell ID, wifi, etc.) -->
    <string name="location_network_based">Google\'s location service</string>
    <!-- [CHAR LIMIT=130] Security & location settings screen, setting summary for Google location service check box-->
    <string name="location_neighborhood_level">Let apps use data from sources such as WiFi and mobile networks to determine your approximate location</string>
    <!-- [CHAR LIMIT=130] Security & location settings screen, setting summary when Use wireless networks check box is selected, for wifi-only devices -->
    <string name="location_neighborhood_level_wifi">Location determined by WiFi</string>
    <!-- [CHAR LIMIT=30] Security & location settings screen, setting check box label for GPS satellites -->
    <string name="location_gps">GPS satellites</string>
    <!-- [CHAR LIMIT=100] Security & location settings screen, setting check box summary for GPS satellites -->
    <string name="location_street_level">Let apps use GPS to pinpoint your location</string>
    <!-- Security & location settings screen, setting check box label if Assisted GPS should be enabled -->
    <string name="assisted_gps">Use assisted GPS</string>
    <!-- Security & location settings screen, setting summary when Assisted GPS check box is selected -->
    <string name="assisted_gps_enabled">Use server to assist GPS (uncheck to reduce network usage)</string>
    <!-- Security & location settings screen, setting summary when Assisted GPS check box is clear -->
    <string name="assisted_gps_disabled">Use server to assist GPS (uncheck to improve GPS performance)</string>
    <!-- [CHAR_LIMIT=30] Security & location settings screen, setting check box label for Google search -->
    <string name="use_location_title">Location &amp; Google search</string>
    <!-- [CHAR_LIMIT=100] Security & location settings screen, setting check box summary for Google search -->
    <string name="use_location_summary">Let Google use your location to improve search results and other services</string>

    <!-- About --> <skip />
    <!-- Main settings screen, setting title for the user to go into the About phone screen -->
    <string name="about_settings" product="tablet">About tablet</string>
    <!-- Main settings screen, setting title for the user to go into the About phone screen -->
    <string name="about_settings" product="default">About phone</string>
    <!-- Main settings screen, setting summary for the user to go into the About phone screen-->
    <string name="about_settings_summary">View legal info, status, software version</string>
    <!-- About phone settings screen, setting option name to go to dialog that shows legal info -->
    <string name="legal_information">Legal information</string>
    <!-- About phone settings screen, setting option name to see a list of contributors -->
    <string name="contributors_title">Contributors</string>
    <!-- Note: this may be replaced by a more-specific title of the activity that will get launched --> <skip />
    <!-- About phone settings screen, setting option name to see copyright-related info -->
    <string name="copyright_title">Copyright</string>
    <!-- Note: this may be replaced by a more-specific title of the activity that will get launched --> <skip />
    <!-- About phone settings screen, setting option name to see licensing info -->
    <string name="license_title">License</string>
    <!-- Note: this may be replaced by a more-specific title of the activity that will get launched --> <skip />
    <!-- About phone settings screen, setting option name to see terms and conditions -->
    <string name="terms_title">Terms and conditions</string>
    <!-- About phone settings screen, running the System Tutorial -->
    <string name="system_tutorial_list_item_title">System tutorial</string>
    <!-- About phone settings screen, summary of what System Tutorial does -->
    <string name="system_tutorial_list_item_summary" product="tablet">Learn how to use your tablet</string>
    <!-- About phone settings screen, summary of what System Tutorial does -->
    <string name="system_tutorial_list_item_summary" product="default">Learn how to use your phone</string>

    <!-- Title for actual Settings license activity. --> <skip />
    <!-- About phone settings, Legal information setting option name and title of dialog box holding license info -->
    <string name="settings_license_activity_title">Open source licenses</string>
    <!-- About phone settings screen, Open source license dialog message when licenses cannot be loaded -->
    <string name="settings_license_activity_unavailable">There is a problem loading the licenses.</string>
    <!-- About phone settings screen, Open source license dialog title until license is fully loaded -->
    <string name="settings_license_activity_loading">Loading\u2026</string>

    <!-- About phone settings, Safety Legal information setting option name and title of dialog box holding safety legal info -->
    <string name="settings_safetylegal_title">Safety information</string>
    <!-- About phone settings, Safety Legal information setting option name and title of dialog box holding safety legal info -->
    <string name="settings_safetylegal_activity_title">Safety information</string>
    <!-- About phone settings screen, Safety legal dialog message when data network is not connected -->
    <string name="settings_safetylegal_activity_unreachable">You don\'t have a data connection. To view this information now, go to %s from any computer connected to the Internet.</string>
    <!-- About phone settings screen, Safety Legal dialog title until the link is fully loaded -->
    <string name="settings_safetylegal_activity_loading">Loading\u2026</string>

    <!-- Lock Pattern settings -->
    <!-- Header on first screen of choose password/PIN flow [CHAR LIMIT=30] -->
    <string name="lockpassword_choose_your_password_header">Choose your password</string>
    <!-- Header on first screen of choose pattern flow [CHAR LIMIT=30] -->
    <string name="lockpassword_choose_your_pattern_header">Choose your pattern</string>
    <!-- Header on first screen of choose password/PIN flow [CHAR LIMIT=30] -->
    <string name="lockpassword_choose_your_pin_header">Choose your PIN</string>
    <!-- Header on password confirm screen [CHAR LIMIT=30] -->
    <string name="lockpassword_confirm_your_password_header">Confirm your password</string>
    <!-- Header on pattern confirm screen [CHAR LIMIT=30] -->
    <string name="lockpassword_confirm_your_pattern_header">Confirm your pattern</string>
    <!-- Header on password confirm screen [CHAR LIMIT=30] -->
    <string name="lockpassword_confirm_your_pin_header">Confirm your PIN</string>
    <!-- Header on password confirm screen if second password doesn't match the first. [CHAR LIMIT=30] -->
    <string name="lockpassword_confirm_passwords_dont_match">Passwords don\'t match</string>
    <!-- Header on pin confirm screen if second pin doesn't match the first. [CHAR LIMIT=30]-->
    <string name="lockpassword_confirm_pins_dont_match">PINs don\'t match</string>
    <!-- Header shown to ask the user to select an unlock method [CHAR LIMIT=30] -->
    <string name="lockpassword_choose_lock_generic_header">Unlock selection</string>
    <!-- Toast shown if setting password was successful -->
    <string name="lockpassword_password_set_toast">Password has been set</string>
    <!-- Toast shown if setting PIN was successful -->
    <string name="lockpassword_pin_set_toast">PIN has been set</string>
    <!-- Toast shown if setting pattern was successful -->
    <string name="lockpassword_pattern_set_toast">Pattern has been set</string>

    <!-- Lock Pattern settings -->
    <!-- Security & location settings screen, header -->
    <string name="lock_settings_title">Screen security</string>
    <!-- Security & location settings screen, setting option name -->
    <string name="lockpattern_change_lock_pattern_label">Change unlock pattern</string>
    <!-- Security & location settings screen, change unlock pattern screen instruction when the user chooses "Change unlock pattern".  We first ask the user toe nter the current pattern, and this is the message seen -->
    <string name="lockpattern_change_lock_pin_label">Change unlock PIN</string>
    <!-- Security & location settings screen, change unlock pattern screen instruction when the user chooses "Change unlock pattern".  We first ask the user toe nter the current pattern, and this is the message seen -->
    <string name="lockpattern_need_to_unlock">Confirm saved pattern</string>
    <!-- Do not translate. -->
    <string name="lockpattern_need_to_unlock_footer" />
    <!-- Security & location settings screen, change unlock pattern screen instruction if user draws incorrect pattern -->
    <string name="lockpattern_need_to_unlock_wrong">Try again:</string>
    <!-- Do not translate. -->
    <string name="lockpattern_need_to_unlock_wrong_footer" />
    <!-- Security & location settings screen, change unlock pattern screen instruction on top of screen.  This si when they are supposed to draw a new unlock pattern (for example, if they are changing their unlock patterns)..-->
    <string name="lockpattern_recording_intro_header">Draw an unlock pattern</string>
    <!-- Security & location settings screen, change unlock pattern screen hint on bottom of screen.  We are telling them to press the menu button to see more options or help. -->
    <string name="lockpattern_recording_intro_footer">Press Menu for help.</string>
    <!-- Security & location settings screen, change unlock pattern screen instruction on top of screen while drawing pattern -->
    <string name="lockpattern_recording_inprogress">Release finger when done.</string>
    <!-- Security & location settings screen, change unlock pattern screen instruction on top of screen if user doesn't connect enough dots -->
    <string name="lockpattern_recording_incorrect_too_short">Connect at least <xliff:g id="number">%d</xliff:g> dots. Try again:</string>
    <!-- Security & location settings screen, change unlock pattern screen message on top of screen after drawing pattern -->
    <string name="lockpattern_pattern_entered_header">Pattern recorded!</string>
    <!-- Security & location settings screen, change unlock pattern screen instruction on top of screen to confirm pattern -->
    <string name="lockpattern_need_to_confirm">Draw pattern again to confirm:</string>
    <string name="lockpattern_pattern_confirmed_header">Your new unlock pattern:</string>
    <!-- Security & location settings screen, change unlock pattern screen button, on bottom of screen.  After they draw a pattern and release their finger, we display the pattern so they remember.  When they are ready to draw it once again to confirm it, they press this button. -->
    <string name="lockpattern_confirm_button_text">Confirm</string>
    <!-- Security & location settings screen, change unlock pattern screen button, on bottom of screen.  After they draw a pattern and release their finger, we display the pattern so they remember.  If they are nto satisfied with this pattern, they click this button to redraw the pattern. -->
    <string name="lockpattern_restart_button_text">Redraw</string>
    <!-- Security & location settings screen, change unlock pattern screen button, on bottom of screen. If they are supposed to enter their current pattern before being able to draw another one, and they screw up, they hit this button to try again -->
    <string name="lockpattern_retry_button_text">Retry</string>
    <!-- Security & location settings screen, change unlock pattern screen button, on bottom of screen. Once they draw a new pattern and confirm it by drawing it again, they press this button to exit -->
    <string name="lockpattern_continue_button_text">Continue</string>
    <!-- Security & location settings screen, unlock screen activity title -->
    <string name="lockpattern_settings_title">Unlock pattern</string>
    <!-- Security & location settings screen, setting check box title if the unlock pattern MUST be drawn everytime they turn on the screen -->
    <string name="lockpattern_settings_enable_title">Require pattern</string>
    <!-- Security & location settings screen, setting summary for the checkbox "Require pattern" -->
    <string name="lockpattern_settings_enable_summary">Must draw pattern to unlock screen</string>
    <!-- Security & location settings screen, setting check box title. This setting controls whether a visible green line is drawn as the user moves his finger around while drawing the unlock pattern.  If checked, this line is drawn.  If unchecked, there is nothing drawn so the user does not reveal his pattern while he unlocks the phone.-->
    <string name="lockpattern_settings_enable_visible_pattern_title">Make pattern visible</string>
    <!-- Security & location settings screen, setting check box title. This setting controls whether tactile feedback will be produced when the user draws the pattern.-->
    <string name="lockpattern_settings_enable_tactile_feedback_title">Vibrate on touch</string>
    <!-- Security & location settings screen, setting option name when user has never set an unlock pattern -->
    <string name="lockpattern_settings_choose_lock_pattern">Set unlock pattern</string>
    <!-- Security & location settings screen, setting option name when user has previously set an unlock pattern and wants to change to a new pattern -->
    <string name="lockpattern_settings_change_lock_pattern">Change unlock pattern</string>
    <!-- Security & location settings screen, the help instructions (an animation) caption -->
    <string name="lockpattern_settings_help_how_to_record">How to draw an unlock pattern</string>
    <!-- Security & location settings screen, change unlock pattern screen instruction on top of screen after too many incorrect attempts -->
    <string name="lockpattern_too_many_failed_confirmation_attempts_header">Too many incorrect attempts!</string>
    <!-- Security & location settings screen, change unlock pattern screen countdown hint on bottom of screen after too many incorrect attempts -->
    <string name="lockpattern_too_many_failed_confirmation_attempts_footer">Try again in <xliff:g id="number">%d</xliff:g> seconds.</string>

    <!-- ChooseLockPatternTutorial --> <skip />
    <!-- ChooseLockPatternTutorial, button labels: This is to cancel the tutorial -->
    <string name="skip_button_label">Cancel</string>
    <!-- ChooseLockPatternTutorial, button labels: Continue to the next page of the tutorial -->
    <string name="next_button_label">Next</string>
    <!-- ChooseLockPatternTutorial, tutorial screen title -->
    <string name="lock_title" product="tablet">Securing your tablet</string>
    <!-- ChooseLockPatternTutorial, tutorial screen title -->
    <string name="lock_title" product="default">Securing your phone</string>
    <!-- ChooseLockPatternTutorial, tutorial screen text -->
    <string name="lock_intro_message" product="tablet">Protect your tablet from unauthorized use by creating a personal screen unlock pattern. Slide your finger to connect the dots in any order on the next screen.  You must connect at least four dots.
        \n\nReady to start? Touch Next.
    </string>
    <!-- ChooseLockPatternTutorial, tutorial screen text -->
    <string name="lock_intro_message" product="default">Protect your phone from unauthorized use by creating a personal screen unlock pattern. Slide your finger to connect at least four dots in any order on the next screen.
        \n\nReady to start? Touch Next.
    </string>

    <!-- Applications Settings --> <skip />
    <!-- Applications settings screen, setting option name for the user to go to the screen to manage installed applications  -->
    <string name="manageapplications_settings_title">Manage apps</string>
    <!-- Applications settings screen, setting option summary for the user to go to the screen to manage installed applications  -->
    <string name="manageapplications_settings_summary">Manage and remove installed apps</string>
    <!-- Applications settings title, on main settings screen. If clicked, the user is taken to a settings screen full of application settings-->
    <string name="applications_settings">Apps</string>
    <!-- Applications settings summary, on main settings screen. The summary for the "Applications" item on the main settings screen. Describes what settings are accessible from the "Applications" screen. -->
    <string name="applications_settings_summary">Manage apps, set up quick launch shortcuts</string>
    <!-- Applications settings screen heading. The header for the Application settings screen. -->
    <string name="applications_settings_header">App settings</string>
    <!-- Applications settings screen, setting check box title. If checked, the system allows installation of applications that are downloaded from random places, such as web sites.  -->
    <string name="install_applications">Unknown sources</string>
    <!-- Applications settings screen, setting check box summary.  This is the summary for "Unknown sources" checkbox  -->
    <string name="install_unknown_applications">Allow installation of non-Market apps</string>
    <!-- Applications settings screen, message text of alert that appears if user selects the "Unknown sources" check box -->
    <string name="install_all_warning" product="tablet">Your tablet and personal data are more vulnerable to attack by apps
 from unknown sources. You agree that you are solely responsible for any
 damage to your tablet or loss of data that may result from using
 these apps.</string>
    <!-- Applications settings screen, message text of alert that appears if user selects the "Unknown sources" check box -->
    <string name="install_all_warning" product="default">Your phone and personal data are more vulnerable to attack by apps
 from unknown sources. You agree that you are solely responsible for any
 damage to your phone or loss of data that may result from using
 these apps.</string>
    <!-- Applications settings screen, setting check box title. If checked, applications show more settings options. -->
    <string name="advanced_settings">Advanced settings</string>
    <!-- Applications settings screen, setting check box summary.  This is the summary for "Advanced settings" checkbox  -->
    <string name="advanced_settings_summary">Enable more settings options</string>
    <!-- Manage applications, individual application info screen title. For example, if they click on "Browser" in "Manage applications", the title of the next screen will be this -->
    <string name="application_info_label">App info</string>
    <!-- Manage applications, individual application info screen, section heading for stuff relating to an app's storage settings. -->
    <string name="storage_label">Storage</string>
    <!-- Manage applications, individual application info screen,  heading for settings related to controlling whether this app is the default for some actions -->
    <string name="auto_launch_label">Launch by default</string>
    <!-- Manage applications, individual application info screen,  heading for settings related to controlling application screen compatibility -->
    <string name="screen_compatibility_label">Screen compatibility</string>
    <!-- Manage applications, individual application info screen, heading for settings related to the app's permissions. for example, it may list all the permissions the app has. -->
    <string name="permissions_label">Permissions</string>
    <!-- Manage applications, Header name used for cache information -->
    <string name="cache_header_label">Cache</string>
    <!-- Manage applications, text label for button -->
    <string name="clear_cache_btn_text">Clear cache</string>
    <!-- Manage applications, label that appears next to the cache size -->
    <string name="cache_size_label">Cache</string>
    <!-- Manage applications, Header name used for other controls -->
    <string name="controls_label">Controls</string>
    <!-- Manage applications, text label for button to kill / force stop an application -->
    <string name="force_stop">Force stop</string>
    <!-- Manage applications, individual application info screen,label under Storage heading.  The total storage space taken up by this app. -->
    <string name="total_size_label">Total</string>
    <!-- Manage applications, individual application info screen, label under Storage heading. The amount of space taken up by the application itself (for example, the java compield files and things like that) -->
    <string name="application_size_label">App</string>
    <!--  Manage applications, individual application info screen, label under Storage heading.  The amount of space taken up by the app's code on USB storage [CHARSIZE=40] -->
    <string name="external_code_size_label">USB storage app</string>
    <!-- Manage applications, individual application info screen, label under Storage heading.  The amount of sapce taken up by the app's data (for example, downloaded emails or something like that) -->
    <string name="data_size_label">Data</string>
    <!--  Manage applications, individual application info screen, label under Storage heading.  The amount of space taken up by the app's data on USB storage [CHARSIZE=40] -->
    <string name="external_data_size_label" product="nosdcard">USB storage data</string>
    <!--  Manage applications, individual application info screen, label under Storage heading.  The amount of space taken up by the app's data on the SD card [CHARSIZE=40] -->
    <string name="external_data_size_label" product="default">SD card</string>
    <!-- Manage applications, individual application info screen, button label under Storage heading. Button to remove the application from the system. -->
    <string name="uninstall_text">Uninstall</string>
    <!-- [CHAR LIMIT=25] Manage applications, individual application info screen, button label under Storage heading. Button to disable an existing application. -->
    <string name="disable_text">Disable</string>
    <!-- [CHAR LIMIT=25] Manage applications, individual application info screen, button label under Storage heading. Button to re-enable an existing application. -->
    <string name="enable_text">Enable</string>
    <!-- Manage applications, individual application info screen, button label under Storage heading. Button to clear all data associated with tis app (for exampel, remove all cached emails for an Email app) -->
    <string name="clear_user_data_text">Clear data</string>
    <!-- Manage applications, restore updated system application to factory version -->
    <string name="app_factory_reset">Uninstall updates</string>
    <!-- Manage applications, individual application info screen, screen, message text under Launch by default heading. This is present if the app is set as a default for some actions. -->
    <string name="auto_launch_enable_text">You\'ve chosen to launch this app by default for some actions.</string>
    <!-- Manage applications, individual application screen, text under Launch by default heading if the app is NOT a default for actions -->
    <string name="auto_launch_disable_text">No defaults set.</string>
    <!-- Manage applications, individual application screen, button label under Launch by default heading.  This is used to clear any default actions that may be assigned to this app.  -->
    <string name="clear_activities">Clear defaults</string>
    <!-- Manage applications, individual application info screen, screen, message text under screen compatibility heading -->
    <string name="screen_compatibility_text">This app may not be designed for your screen. You can control how it
            adjusts to your screen here.</string>
    <!-- Manage applications, individual application screen, checkbox to control asking for compatibility mode.  -->
    <string name="ask_compatibility">Ask when launched</string>
    <!-- Manage applications, individual application screen, checkbox to control compatibility mode.  -->
    <string name="enable_compatibility">Scale app</string>
    <!-- Manage apps, individual app screen, substituted for the application's label when the app's label CAN NOT be determined.-->
    <string name="unknown">Unknown</string>
    <!-- [CHAR LIMIT=25] Manage applications screen, menu item.  Sorts all of the apps in the list alphabetically. -->
    <string name="sort_order_alpha">Sort by name</string>
    <!-- Manage applications screen, menu item. Sorts all of the apps in the list based on their file size.  This is used to uninstall when space is getting low. -->
    <string name="sort_order_size">Sort by size</string>
    <!-- [CHAR LIMIT=25] Manage applications screen, menu item.  Show running services. -->
    <string name="show_running_services">Show running services</string>
    <!-- [CHAR LIMIT=25] Manage applications screen, menu item.  Show background cached processes. -->
    <string name="show_background_processes">Show cached processes</string>
    <!-- Manage applications screen, individual app screen, button label when the user wants to manage the space taken up by an app. -->
    <string name="manage_space_text">Manage space</string>
    <!-- Text for menu option in ManageApps screen to present various menu options -->
    <string name="filter">Filter</string>
    <!-- Title of dialog for presenting filter options -->
    <string name="filter_dlg_title">Choose filter options</string>
    <!-- Text for filter option in ManageApps screen to display all installed
    applications -->
    <string name="filter_apps_all">All</string>
    <!-- Text for filter option in ManageApps screen to display third party
    applications only -->
    <string name="filter_apps_third_party">Downloaded</string>
    <!-- Text for filter option in ManageApps screen to display list of running
    packages only. -->
    <string name="filter_apps_running">Running</string>
    <!-- Text for filter option in ManageApps screen to display list of
    packages installed on sdcard. [CHAR LIMIT=30] -->
    <string name="filter_apps_onsdcard" product="nosdcard">USB storage</string>
    <!-- Text for filter option in ManageApps screen to display list of
    packages installed on sdcard. -->
    <string name="filter_apps_onsdcard" product="default">On SD card</string>
    <!-- [CHAR LIMIT=25] Manage applications, text telling using an application is disabled. -->
    <string name="disabled">Disabled</string>
    <!-- [CHAR LIMIT=25] Text shown when there are no applications to display. -->
    <string name="no_applications">No apps.</string>
    <!-- [CHAR LIMIT=15] Manage applications, label for chart showing internal storage use. -->
    <string name="internal_storage">Internal storage</string>
    <!-- [CHAR LIMIT=15] Manage applications, label for chart showing SD card storage use. -->
    <string name="sd_card_storage" product="nosdcard">USB storage</string>
    <!-- [CHAR LIMIT=15] Manage applications, label for chart showing SD card storage use. -->
    <string name="sd_card_storage" product="default">SD card storage</string>
    <!-- Manage app screen, shown when the activity is busy recomputing the size of each app -->
    <string name="recompute_size">Recomputing size\u2026</string>
    <!-- Manage applications, individual application screen, confirmation dialog title. Displays when user selects to "Clear data". -->
    <string name="clear_data_dlg_title">Delete app data?</string>
    <!-- Manage applications, individual application screen, confirmation dialog message. Displays when user selects to "Clear data". It warns the user of the consequences of clearing the data for an app. -->
    <string name="clear_data_dlg_text">All this app\'s data will be deleted permanently. This includes all files, settings, accounts, databases, etc.</string>
    <!-- Manage applications, individual application screen, confirmation dialog button. Displays when user selects to "Clear data". Goes through with the clearing of the data. -->
    <string name="dlg_ok">OK</string>
    <!-- Manage applications, individual application screen, confirmation dialog button. Displays when user selects to "Clear data". -->
    <string name="dlg_cancel">Cancel</string>
    <!-- Manage applications, individual application dialog box title. Shown when the user somehow got into a state where it wants to manage some app that isn't found. -->
    <string name="app_not_found_dlg_title"></string>
    <!-- Manage applications, individual application dialog box message. Shown when the user somehow got into a state where it wants to manage some app that isn't found. -->
    <string name="app_not_found_dlg_text"> The app wasn\'t
found in the list of installed apps.</string>
    <!-- Manage applications, individual application dialog box message. Shown when there was an error trying to clear the data. -->
    <string name="clear_data_failed">Couldn\'t clear app data.</string>
    <!-- Manage applications, factory reset dialog title for system applications. -->
    <string name="app_factory_reset_dlg_title">Uninstall updates?</string>
    <!-- Manage applications, factory reset option dialog text for system applications. -->
    <string name="app_factory_reset_dlg_text">All updates to this Android system app will be uninstalled.</string>
    <!-- Manage applications, title for dialog if clear data fails-->
    <string name="clear_failed_dlg_title">Clear data</string>
    <!-- Manage applications, text for dialog if clear data fails-->
    <string name="clear_failed_dlg_text">Couldn\'t clear data for app.</string>
    <!-- Manage applications, individual application info screen, text that appears under the "Permissions" heading. This describes the permissions that the application has. -->
    <string name="security_settings_desc" product="tablet">This app can access the following on your tablet:</string>
    <!-- Manage applications, individual application info screen, text that appears under the "Permissions" heading. This describes the permissions that the application has. -->
    <string name="security_settings_desc" product="default">This app can access the following on your phone:</string>
    <string name="computing_size">Computing\u2026</string>
    <string name="invalid_size_value">Unable to compute package size</string>
    <!-- String displayed when list is empty -->
    <string name="empty_list_msg">You don\'t have any third-party apps installed.</string>
    <!-- Manage applications, version string displayed in app snippet -->
    <string name="version_text">version <xliff:g id="version_num">%1$s</xliff:g></string>
    <!-- Manage applications, text for Move button -->
    <string name="move_app">Move</string>
    <!-- Manage applications, text for Move button to move app to internal storage -->
    <string name="move_app_to_internal" product="tablet">Move to tablet</string>
    <!-- Manage applications, text for Move button to move app to internal storage -->
    <string name="move_app_to_internal" product="default">Move to phone</string>
    <!-- Manage applications, text for Move button  to move app to sdcard [CHAR LIMIT=25] -->
    <string name="move_app_to_sdcard" product="nosdcard">Move to USB storage</string>
    <!-- Manage applications, text for Move button  to move app to sdcard -->
    <string name="move_app_to_sdcard" product="default">Move to SD card</string>
    <!-- Manage applications, title for dialog when killing persistent apps-->
    <!-- Manage applications, text for Move button when move is in progress -->
    <string name="moving">Moving</string>

    <!-- Manage applications, text for move error messages -->
    <string name="insufficient_storage">Not enough storage space.</string>
    <string name="does_not_exist">App doesn\'t exist.</string>
    <string name="app_forward_locked">App is copy-protected.</string>
    <string name="invalid_location">Install location isn\'t valid.</string>
    <string name="system_package">System updates can\'t be installed on external media.</string>

    <string name="force_stop_dlg_title">Force stop?</string>
    <!-- [CHAR LIMIT=200] Manage applications, text for dialog when killing persistent apps-->
    <string name="force_stop_dlg_text">If you force stop an app, it may misbehave.</string>
    <!-- Manage applications, text for dialog when moving an app -->
    <string name="move_app_failed_dlg_title"></string>
    <!-- Manage applications, text for dialog moving an app -->
    <string name="move_app_failed_dlg_text">Couldn\'t move app. <xliff:g id="reason">%1$s</xliff:g></string>
    <!-- Manage applications, application installation location title -->
    <string name="app_install_location_title">Preferred install location</string>
    <!-- Manage applications. application installation location summary -->
    <string name="app_install_location_summary">Change the preferred installation location for new apps</string>
    <!-- [CHAR LIMIT=30] Manage applications, title for dialog when disabling apps -->
    <string name="app_disable_dlg_title">Disable built-in app?</string>
    <!-- [CHAR LIMIT=200] Manage applications, text for dialog when disabling apps -->
    <string name="app_disable_dlg_text">If you disable a built-in app, other apps
        may misbehave.</string>

    <!-- [CHAR LIMIT=25] Services settings screen, setting option name for the user to go to the screen to view app storage use -->
    <string name="storageuse_settings_title">Storage use</string>
    <!-- Services settings screen, setting option summary for the user to go to the screen to app storage use -->
    <string name="storageuse_settings_summary">View storage used by apps</string>

    <!-- Services settings screen, setting option name for the user to go to the screen to view running services -->
    <string name="runningservices_settings_title">Running services</string>
    <!-- Services settings screen, setting option summary for the user to go to the screen to view running services  -->
    <string name="runningservices_settings_summary">View and control currently running services</string>
    <!-- Label for a service item when it is restarting -->
    <string name="service_restarting">Restarting</string>
    <!-- Label for a process item representing a background process -->
    <string name="cached">Cached background process</string>
    <!-- [CHAR LIMIT=25] Text shown when there are no services running -->
    <string name="no_running_services">Nothing running.</string>
    <!-- Running services, description for a service in the started state -->
    <string name="service_started_by_app">Started by app.</string>
    <!-- Running services, description for a service in the started state -->
    <string name="service_client_name"><xliff:g id="client_name">%1$s</xliff:g></string>
    <!-- [CHAR LIMIT=10] Running services, summary of background processes -->
    <string name="service_background_processes"><xliff:g id="memory">%1$s</xliff:g> free</string>
    <!-- [CHAR LIMIT=10] Running services, summary of foreground processes -->
    <string name="service_foreground_processes"><xliff:g id="memory">%1$s</xliff:g> used</string>
    <!-- [CHAR LIMIT=10] Running services, label for chart showing memory use. -->
    <string name="memory">RAM</string>
    <!-- Text to label a process entry with the process name. -->
    <string name="service_process_name"><xliff:g id="process">%1$s</xliff:g></string>
    <!-- Descriptive text of a running process: singular process, singular service. -->
    <string name="running_processes_item_description_s_s"><xliff:g id="numprocess">%1$d</xliff:g>
        process and <xliff:g id="numservices">%2$d</xliff:g> service</string>
    <!-- Descriptive text of a running process: singular process, plural service. -->
    <string name="running_processes_item_description_s_p"><xliff:g id="numprocess">%1$d</xliff:g>
        process and <xliff:g id="numservices">%2$d</xliff:g> services</string>
     <!-- Descriptive text of a running process: plural process, singular service. -->
    <string name="running_processes_item_description_p_s"><xliff:g id="numprocess">%1$d</xliff:g>
        processes and <xliff:g id="numservices">%2$d</xliff:g> service</string>
    <!-- Descriptive text of a running process: plural process, plural service. -->
    <string name="running_processes_item_description_p_p"><xliff:g id="numprocess">%1$d</xliff:g>
        processes and <xliff:g id="numservices">%2$d</xliff:g> services</string>

    <!-- Details about an application's running services. -->
    <string name="runningservicedetails_settings_title">Running app</string>
    <!-- Message displayed when there are no active services in a process. -->
    <string name="no_services">Not active</string>
    <!-- Title for list of services. -->
    <string name="runningservicedetails_services_title">Services</string>
    <!-- Title for list of services. -->
    <string name="runningservicedetails_processes_title">Processes</string>
    <!-- Running service details, stop a service that has started itself. -->
    <string name="service_stop">Stop</string>
    <!-- Running service details, manage a service that is running for some other reason. -->
    <string name="service_manage">Settings</string>
    <!-- Running service details, default description for services that are started. -->
    <string name="service_stop_description">This service was started by its
        app. Stopping it may cause the app to fail.</string>
    <!-- Running service details, description for running heavy-weight process. -->
    <string name="heavy_weight_stop_description">This app can\'t safely
        be stopped. If you stop it, you may lose some of your current work.</string>
    <!-- Running service details, description for background process. -->
    <string name="background_process_stop_description">This is an old app
        process that is still running in case it\'s needed again.
        There is usually no reason to stop it.</string>
    <!-- Running service details, default description for services that are managed. -->
    <string name="service_manage_description"><xliff:g id="client_name">%1$s</xliff:g>:
        currently in use. Touch Settings to control it.</string>
    <!-- Description of the main process in the details. -->
    <string name="main_running_process_description">Main process in use.</string>
    <!-- Message that a process's service is in use. -->
    <string name="process_service_in_use_description">Service <xliff:g id="comp_name">%1$s</xliff:g>
        is in use.</string>
    <!-- Message that a process's provider is in use. -->
    <string name="process_provider_in_use_description">Provider <xliff:g id="comp_name">%1$s</xliff:g>
        is in use.</string>
    <!-- Running service details, stop confirmation dialog title. Displays when user selects selects to stop a system service. -->
    <string name="runningservicedetails_stop_dlg_title">Stop system service?</string>
    <!-- Running service details, stop confirmation descriptive text. Displays when user selects selects to stop a system service. -->
    <string name="runningservicedetails_stop_dlg_text" product="tablet">If you stop this service, some
        features of your tablet may stop working correctly until you power it off
        and then on again.</string>
    <!-- Running service details, stop confirmation descriptive text. Displays when user selects selects to stop a system service. -->
    <string name="runningservicedetails_stop_dlg_text" product="default">If you stop this service, some
        features of your phone may stop working correctly until you power it off
        and then on again.</string>

    <!-- Language Settings --> <skip />
    <!-- Title of setting on main settings screen.  This item will take the user to the screen to tweak settings realted to locale and text -->
    <string name="language_settings">Language &amp; input</string>
    <!-- Title of Language and keyboard settings screen -->
    <string name="language_keyboard_settings_title">Language &amp; input</string>
    <!-- On Language & keyboard settings screen, heading. Inside the "Language & keyboard settings" screen, this is the header for settings that relate to language (select the system language, user dictionary for the language). -->
    <string name="language_settings_category">Language settings</string>
    <!-- On Language & keyboard settings screen, heading. Inside the "Language & keyboard settings" screen, this is the header for settings that relate to keyboard (enable/disable each keyboard, settings for each keyboard). -->
    <string name="keyboard_settings_category">Keyboard &amp; input methods</string>
    <!-- On Text & language settings screen, setting option name. title of the setting to take the user to a screen to select the locale. -->
    <string name="phone_language">Language</string>
    <!-- On Text & language settings screen, setting option name. summary of the setting to take the user to a screen to select the locale. -->
    <string name="phone_language_summary">""</string>
    <!-- On Text & language settings screen, setting option name. title of the setting to enable autoreplace of entered text. auto replace is a feature that will automatically correct mistyped words. -->
    <string name="auto_replace">Auto-replace</string>
    <!-- On Text & language settings screen, setting summary.  This is the summary for the "Auto-replace" setting. -->
    <string name="auto_replace_summary">Correct mistyped words</string>
    <!-- On Text & language settings screen, setting option name.  title of the setting to enable autocapitalization of entered text.  for example, after the user finishes a sentence, the next letter he types will automatically be capitalizated. [CHAR LIMIT=25] -->
    <string name="auto_caps">Auto-capitalization</string>
    <!-- On Text & language settings screen, setting summary. Summary for the Auto-cap setting. [CHAR LIMIT=100]-->
    <string name="auto_caps_summary">Capitalize first letter in sentences</string>
    <!-- On Text & language settings screen, setting option name. title of the setting to enable automatic punctuation of entered text.  for example, it will change an entered "youre" to "you're". -->
    <string name="auto_punctuate">Auto-punctuate</string>
    <!-- On Text & language settings screen, category for physical keyboard text entry options. -->
    <string name="hardkeyboard_category">Physical keyboard settings</string>
    <!-- On Text & language settings screen, setting summary for the Auto-punctuate setting. -->
    <string name="auto_punctuate_summary">Press Space key twice to insert \u0022.\u0022</string>
    <!-- On Security & location settings screen, setting check box name. Title of the checkbox to set whether password edit fields will show the most recent character typed and then hide it, or just hide it right away.  By hide, I mean mask it out. -->
    <string name="show_password">Make passwords visible</string>
    <!-- On Security & location settings screen, setting check box summary. Summary for the visible passwords setting. -->
    <string name="show_password_summary"></string>
    <!-- Warning message about security implications of enabling an input method, displayed as a dialog
         message when the user selects to enable an IME. -->
    <string name="ime_security_warning">This input method may be able to collect
    all the text you type, including personal data like passwords and credit
    card numbers.  It comes from the app
    <xliff:g id="ime_application_name">%1$s</xliff:g>.
    Use this input method?</string>
    <!-- Warning message about security implications of enabling a spell checker, displayed as a dialog
         message when the user selects to enable a spell checker. -->
    <string name="spellchecker_security_warning">This spell checker may be able to collect
    all the text you type, including personal data like passwords and credit
    card numbers.  It comes from the app
    <xliff:g id="spellchecker_application_name">%1$s</xliff:g>.
    Use this spell checker?</string>
    <!-- On Language & input settings screen, heading. Inside the "Language & input settings" screen, this is the header for settings that relate to mouse and trackpad devices. [CHAR LIMIT=40] -->
    <string name="pointer_settings_category">Mouse/trackpad</string>
    <!-- On Language & input settings screen, setting summary.  Setting for mouse pointer speed. [CHAR LIMIT=35] -->
    <string name="pointer_speed">Pointer speed</string>

    <!-- User dictionary settings --><skip />
    <!-- User dictionary settings, The titlebar text of the User dictionary settings screen. -->
    <string name="user_dict_settings_titlebar">User dictionary</string>
    <!-- User dictionary settings, The title of the list item to go into the User dictionary settings screen when there is only one user dictionary. [CHAR LIMIT=35] -->
    <string name="user_dict_single_settings_title">Personal dictionary</string>
    <!-- User dictionary settings, The title of the list item to go into the User dictionary list when there are several user dictionaries. [CHAR LIMIT=35] -->
    <string name="user_dict_multiple_settings_title">Personal dictionaries</string>
    <!-- User dictionary settings.  The summary of the listem item to go into the User dictionary settings screen. -->
    <string name="user_dict_settings_summary">""</string>
    <!-- User dictionary settings. The title of the menu item to add a new word to the user dictionary. -->
    <string name="user_dict_settings_add_menu_title">Add</string>
    <!-- User dictionary settings. The title of the dialog to add a new word to the user dictionary. -->
    <string name="user_dict_settings_add_dialog_title">Add to dictionary</string>
    <!-- User dictionary settings. The title of the dialog to edit an existing word in the user dictionary. -->
    <string name="user_dict_settings_edit_dialog_title">Edit word</string>
    <!-- User dictionary settings. The title of the context menu item to edit the current word -->
    <string name="user_dict_settings_context_menu_edit_title">Edit</string>
    <!-- User dictionary settings. The title of the context menu item to delete the current word -->
    <string name="user_dict_settings_context_menu_delete_title">Delete</string>
    <!-- User dictionary settings. The text to show when there are no user-defined words in the dictionary  [CHAR LIMIT=200] -->
    <string name="user_dict_settings_empty_text">You don\'t have any words in the user dictionary. Add a word by touching the Add (+) button.</string>
    <!-- User dictionary settings. The text to show to describe the dictionary common to all languages -->
    <string name="user_dict_settings_all_languages">All languages</string>

    <!-- This is for diagnostics screen. The title of a screen with various items realted to launching screens that will giev the user info. For example, it contains "Phone information" and "Battery information" -->
    <string name="testing">Testing</string>
    <!-- In the Testing screen.  The item title of the activity that shows a bunch of phone-related information.  -->
    <string name="testing_phone_info" product="tablet">Tablet information</string>
    <!-- In the Testing screen.  The item title of the activity that shows a bunch of phone-related information.  -->
    <string name="testing_phone_info" product="default">Phone information</string>
    <!-- In the Testing screen. The item title of the activity that shows a bunch of battery-related information.  -->
    <string name="testing_battery_info">Battery information</string>
    <!-- Do not translate. In the Testing screen. The item title of the activity that shows a bunch of SIM-related operations.  -->
    <string name="testing_sim_toolkit">SIM toolkit</string>

    <!-- The title of the item to go into the Quick launch settings. -->
    <string name="quick_launch_title">Quick launch</string>
    <!-- The summary of the item to go into the Quick launch settings. This is a description of what Quick launch offers. -->
    <string name="quick_launch_summary">Set keyboard shortcuts to launch apps</string>
    <!-- On the Quick launch settings screen, title of the item for shortcut letters that are not assigned to an application yet. Quick launch is assigning a global shortcut to launch a specific app. -->
    <string name="quick_launch_assign_application">Assign app</string>
    <!-- On the Quick launch settings screen, summary text for the item of letters that are not assigned. See the quick launch "Assign application" for a description of quick launch -->
    <string name="quick_launch_no_shortcut">No shortcut</string>
    <!-- On the Quick launch settings screen, summary text under the item for each assigned letter.  -->
    <string name="quick_launch_shortcut">Search + <xliff:g id="shortcut_letter">%1$s</xliff:g></string>
    <!-- On the Quick launch settings screen, title of "Clear shortcut" confirmation dialog. This is reached by longpressing an item for a shortcut letter.  This allows the user to clear the assigned application for that shortcut letter. -->
    <string name="quick_launch_clear_dialog_title">Clear</string>
    <!-- On the Quick launch settings screen, message in the "Clear shortcut" confirmation dialog.  See the title for this dialog for more info. -->
    <string name="quick_launch_clear_dialog_message">Your shortcut for <xliff:g id="shortcut_letter">%1$s</xliff:g> (<xliff:g id="application_name">%2$s</xliff:g>) will be cleared.</string>
    <!-- Clear dialog for quick launch setting box button labels: -->
    <string name="quick_launch_clear_ok_button">OK</string>
    <!-- Clear dialog for quick launch setting box button labels: -->
    <string name="quick_launch_clear_cancel_button">Cancel</string>
    <!-- Quick launch screen, when assigning an app to a shortcut, this menu item to show a list of all applications.  -->
    <string name="quick_launch_display_mode_applications">Apps</string>
    <!-- Quick launch screen, when assigning an app to a shortcut, this menu item to show a list of all shortcutable applications -->
    <string name="quick_launch_display_mode_shortcuts">Shortcuts</string>

    <!-- Input methods Settings -->
    <string name="input_methods_settings_title">Text input</string>
    <!-- Setting name for Input Method chooser -->
    <string name="input_method">Input method</string>
    <!-- Title for the option to press to choose the current input method [CHAR LIMIT=35] -->
    <string name="current_input_method">Default</string>
    <!-- Title for setting the visibility of input method selector [CHAR LIMIT=35] -->
    <string name="input_method_selector">Input method selector</string>
    <!-- An option to always show input method selector automatically when needed [CHAR LIMIT=25] -->
    <string name="input_method_selector_show_automatically_title">Automatic</string>
    <!-- An option to always show input method selector [CHAR LIMIT=25] -->
    <string name="input_method_selector_always_show_title">Always show</string>
    <!-- An option to always hide input method selector [CHAR LIMIT=25] -->
    <string name="input_method_selector_always_hide_title">Always hide</string>
    <!-- Title for configuring input method settings [CHAR LIMIT=35] -->
    <string name="configure_input_method">Set up input methods</string>
    <!-- Title for settings of each IME [CHAR LIMIT=25] -->
    <string name="input_method_settings">Settings</string>
    <!-- Spoken description for IME settings image button [CHAR LIMIT=NONE] -->
    <string name="input_method_settings_button">Settings</string>
    <!-- Title for settings of active input methods in each IME [CHAR LIMIT=35] -->
    <string name="active_input_method_subtypes">Active input methods</string>
    <!-- Title for settings whether or not the framework will select input methods in an IME based on the current system locale. [CHAR LIMIT=35] -->
    <string name="use_system_language_to_select_input_method_subtypes">Use system language</string>
    <!-- Input Methods Settings localized format string for generating the appropriate "Foo settings" menu label for the Input Method named "Foo" [CHAR LIMIT=35] -->
    <string name="input_methods_settings_label_format"><xliff:g id="ime_name">%1$s</xliff:g> settings</string>
    <!-- Title for the settings of selecting active input methods of an IME [CHAR LIMIT=35] -->
    <string name="input_methods_and_subtype_enabler_title">Choose active input methods</string>
    <!-- Summary for on-screen keyboard settings -->
    <string name="onscreen_keyboard_settings_summary">Onscreen keyboard settings</string>
    <!-- Title for built-in keyboard settings -->
    <string name="builtin_keyboard_settings_title">Physical keyboard</string>
    <!-- Summary for built-in keyboard settings -->
    <string name="builtin_keyboard_settings_summary">Physical keyboard settings</string>

    <!-- Development Settings.  the title for the item to take the user to Development settings.  Development settings are settings meant for application developers.  -->
    <string name="development_settings_title">Developer options</string>
    <!-- Development Settings summary.  The summary of the item to take the user to Development settings.  Development settings are settings meant for application developers. -->
    <string name="development_settings_summary">Set options for app development</string>
    <!-- Setting checkbox title for Whether to enable USB debugging support on the phone. -->
    <string name="enable_adb">USB debugging</string>
    <!-- Setting checkbox summary for Whether to enable USB debugging support on the phone -->
    <string name="enable_adb_summary">Debug mode when USB is connected</string>
    <!-- Development settings: title for the field that shows the "App ID" development identifier
         for this device. [CHAR LIMIT=40] -->
    <string name="verifier_device_identifier">Development device ID</string>
    <!-- Development settings: a string to show when the "App ID" development identifier for this
         device cannot be read from internal settings. [CHAR LIMIT=60] -->
    <string name="verifier_device_identifier_not_available">Device information not available</string>
    <!-- Setting Checkbox title whether to keep the screen on when plugged in to a power source -->
    <string name="keep_screen_on">Stay awake</string>
    <!-- setting Checkbox summary whether to keep the screen on when plugged in  -->
    <string name="keep_screen_on_summary">Screen will never sleep while charging</string>
    <!-- Setting Checkbox title whether to allow mock locations -->
    <string name="allow_mock_location">Allow mock locations</string>
    <!-- setting Checkbox summary whether to allow mock locations  -->
    <string name="allow_mock_location_summary">Allow mock locations</string>
    <!-- Title of warning dialog about the implications of enabling USB debugging -->
    <string name="adb_warning_title">Allow USB debugging?</string>
    <!-- Warning text to user about the implications of enabling USB debugging -->
    <string name="adb_warning_message">USB debugging is intended for development purposes only. Use it to copy data between your computer and your device, install apps on your device without notification, and read log data.</string>

    <!-- Title for the screen that lets the user choose a gadget to add to the home screen
         (or other screens that can host gadgets).  Note to translators: we're still determining
         the final name for Gadgets/Widgets, so please translate both for now. -->
    <string name="gadget_picker_title">Choose gadget</string>

    <!-- Title for the screen that lets the user choose a widget to add to the home screen
         (or other screens that can host widgets).  Note to translators: we're still determining
         the final name for Gadgets/Widgets, so please translate both for now. -->
    <string name="widget_picker_title">Choose widget</string>

    <!-- Used to show an amount of time in the form "d days, h hours, m minutes, s seconds" in BatteryHistory -->
    <string name="battery_history_days"><xliff:g id="days">%1$d</xliff:g>d <xliff:g id="hours">%2$d</xliff:g>h <xliff:g id="minutes">%3$d</xliff:g>m <xliff:g id="seconds">%4$d</xliff:g>s</string>

    <!-- Used to show an amount of time in the form "h hours, m minutes, s seconds" in BatteryHistory -->
    <string name="battery_history_hours"><xliff:g id="hours">%1$d</xliff:g>h <xliff:g id="minutes">%2$d</xliff:g>m <xliff:g id="seconds">%3$d</xliff:g>s</string>

    <!-- Used to show an amount of time in the form "m minutes, s seconds" in BatteryHistory -->
    <string name="battery_history_minutes"><xliff:g id="minutes">%1$d</xliff:g>m <xliff:g id="seconds">%2$d</xliff:g>s</string>

    <!-- Used to show an amount of time in the form "s seconds" in BatteryHistory -->
    <string name="battery_history_seconds"><xliff:g id="seconds">%1$d</xliff:g>s</string>

    <!-- XXX remove? Strings used for displaying usage statistics -->
    <string name="usage_stats_label">Usage statistics</string>

    <!-- In the Testing screen. The item title of the activity that shows usage statistics.  -->
    <string name="testing_usage_stats">Usage statistics</string>
    <!-- label for text to indicate sort options -->
    <string name="display_order_text">Sort by:</string>
    <!-- label for application name -->
    <string name="app_name_label">App</string>
    <!-- label for launch count -->
    <string name="launch_count_label">Count</string>
    <!-- label for usage time -->
    <string name="usage_time_label">Usage time</string>

    <!-- Accessibility settings -->
    <skip />

    <!-- Settings title in main settings screen for accessibility settings -->
    <string name="accessibility_settings">Accessibility</string>
    <!-- Settings title for accessibility settings screen -->
    <string name="accessibility_settings_title">Accessibility settings</string>

    <!--  Title for the accessibility preference category of accessibility services. [CHAR LIMIT=25] -->
    <string name="accessibility_services_title">Services</string>

    <!-- Title for the accessibility preference category of system related preferences. [CHAR LIMIT=25] -->
    <string name="accessibility_system_title">System</string>
    <!-- Title for the accessibility preference to enable large text. [CHAR LIMIT=35] -->
    <string name="accessibility_toggle_large_text_title">Large text</string>
    <!-- Title for the accessibility preference to power button to end a call. [CHAR LIMIT=35] -->
    <string name="accessibility_power_button_ends_call_title">Power button ends call</string>
    <!-- Title for accessibility preference to enable touch exploration mode. [CHAR LIMIT=35] -->
    <string name="accessibility_touch_exploration_title">Explore by touch</string>
    <!-- Summary for accessibility of the touch exploration mode. [CHAR LIMIT=NONE] -->
    <string name="accessibility_touch_exploration_summary" >When Explore by Touch is turned on,
    you can hear or see descriptions of what\'s under your finger.\n\n This feature is for low-vision users.</string>
    <!-- Title for accessibility preference to choose long-press delay i.e. timeout before it is detected. [CHAR LIMIT=35] -->
    <string name="accessibility_long_press_timeout_title">Touch &amp; hold delay</string>
    <!-- Title for accessibility preference to install accessibility scripts from Google. [CHAR LIMIT=35] -->
    <string name="accessibility_script_injection_title">Install web scripts</string>

    <!-- Title for accessibility menu item to lauch a settings activity. [CHAR LIMIT=15] -->
    <string name="accessibility_menu_item_settings">Settings</string>
    <!-- Title for accessibility menu item to lauch a tutorial. [CHAR LIMIT=15] -->
    <string name="accessibility_menu_item_tutorial">Tutorial</string>

    <!-- Summary for the enabled state of an accessiblity serivce. [CHAR LIMIT=10] -->
    <string name="accessibility_service_state_on">On</string>
    <!-- Summary for the disabled state of an accessiblity serivce. [CHAR LIMIT=10] -->
    <string name="accessibility_service_state_off">Off</string>

    <!-- Summary for the allowed state of script injection. [CHAR LIMIT=15] -->
    <string name="accessibility_script_injection_allowed">Allowed</string>
    <!-- Summary for the disallowed state of script injection. [CHAR LIMIT=15] -->
    <string name="accessibility_script_injection_disallowed">Not allowed</string>

    <!-- Title for the dialog button to allow script injection. [CHAR LIMIT=15] -->
    <string name="accessibility_script_injection_button_allow">Allow</string>
    <!-- Title for the dialog button to disallow script injection. [CHAR LIMIT=15] -->
    <string name="accessibility_script_injection_button_disallow">Don\'t allow</string>

     <!-- Title for a warning message about security implications of enabling an accessibility service,
         displayed as a dialog message when the user selects to enable an accessibility service (tablet). [CHAR LIMIT=NONE] -->
    <string name="accessibility_service_security_warning_title">Use
         <xliff:g id="service" example="TalkBack">%1$s</xliff:g>?</string>
    <!-- Summary for a warning message about security implications of enabling an accessibility service,
         displayed as a dialog message when the user selects to enable an accessibility service (tablet). [CHAR LIMIT=NONE] -->
    <string name="accessibility_service_security_warning_summary" product="tablet">
            <xliff:g id="accessibility_service_name">%1$s</xliff:g> can
            collect all of the text you type, except passwords. This includes personal data such as credit card
            numbers. It can also collect data about your interactions with the tablet.</string>
    <!-- Summary for a warning message about security implications of enabling an accessibility service,
         displayed as a dialog message when the user selects to enable an accessibility service (phone). [CHAR LIMIT=NONE] -->
    <string name="accessibility_service_security_warning_summary" product="default">
            <xliff:g id="accessibility_service_name">%1$s</xliff:g> can
            collect all of the text you type, except passwords. This includes personal data such as credit card
            numbers. It can also collect data about your interactions with the phone.</string>

    <!-- Title for a warning about disabling an accessibility service displayed as a dialog message when the user
         selects to disable that service. This avoids accidental disabling. [CHAR LIMIT=NONE] -->
    <string name="accessibility_service_disable_warning_title">Stop
         <xliff:g id="service" example="TalkBack">%1$s</xliff:g>?</string>
    <!-- Summary for a warning about disabling accessibility service displayed as a dialog message when the user
         selects to disable that service. This avoids accidental disabling. [CHAR LIMIT=NONE] -->
    <string name="accessibility_service_disable_warning_summary">Touching OK will
        stop <xliff:g id="service" example="TalkBack">%1$s</xliff:g>.</string>

    <!-- Title for the prompt shown as a placeholder if no accessibility serivices are installed. [CHAR LIMIT=50] -->
    <string name="accessibility_no_services_installed">No services installed</string>

    <!-- Title for the prompt that lets users know that they have no accessibility related apps
         installed and that they can install TalkBack from Market. [CHAR LIMIT=50] -->
    <string name="accessibility_service_no_apps_title">Need a screen reader?</string>
    <!-- Message for the prompt that lets users know that they have no accessibility related apps
         installed and that they can install TalkBack from Market. [CHAR LIMIT=NONE] -->
    <string name="accessibility_service_no_apps_message">TalkBack provides spoken feedback to
         help blind and low-vision users. Do you want to install it for free from Android
         Market?</string>

    <!-- Title for a warning about downloading accessibility scripts displayed as a dialog message
         when the user selects to enable script downloading. [CHAR LIMIT=50] -->
    <string name="accessibility_script_injection_security_warning_title">Install web scripts?</string>
    <!-- Warning message about security implications of downloading accessibility scripts,
         displayed as a dialog message when the user selects to enable script downloading. [CHAR LIMIT=NONE] -->
    <string name="accessibility_script_injection_security_warning_summary">Do you want apps to
        install scripts from Google that make their web content more accessible?</string>

    <!-- Warning message that the interaction model changes on enabling touch exploration. [CHAR LIMIT=NONE] -->
    <string name="accessibility_touch_exploration_warning">This feature changes the
        way your device responds to touch. Turn on?</string>
    <!-- Default description for an accessibility serivice if the latter doesn't provide one. [CHAR LIMIT=NONE] -->
    <string name="accessibility_service_default_description">No description provided.</string>

    <!-- Accessibility settings: button for lauching settings for an accessibility service -->
    <string name="settings_button">Settings</string>

    <!-- App Fuel Gauge strings -->
    <skip />

    <!-- Activity title for App Fuel Gauge summary -->
    <string name="power_usage_summary_title">Battery</string>
    <!-- Activity title summary for App Fuel Gauge summary -->
    <string name="power_usage_summary">What has been using the battery</string>
    <!-- Message to show when battery usage data is not available [CHAR LIMIT=30] -->
    <string name="power_usage_not_available">Battery usage data not available</string>
    <!-- Display the battery level and status [CHAR_LIMIT=30] -->
    <string name="power_usage_level_and_status"><xliff:g id="level">%1$s</xliff:g> - <xliff:g id="status">%2$s</xliff:g></string>
    <!-- Battery usage since unplugged -->
    <string name="battery_since_unplugged">Battery use since unplugged</string>
    <!-- Battery usage since user reset the stats -->
    <string name="battery_since_reset">Battery use since reset</string>
    <!-- Battery usage on battery duration -->
    <string name="battery_stats_on_battery"><xliff:g id="time">%1$s</xliff:g> on battery</string>
    <!-- Battery usage duration -->
    <string name="battery_stats_duration"><xliff:g id="time">%1$s</xliff:g> since unplugged</string>
    <!-- [CHAR LIMIT=25] Label for battery stats charging state graph -->
    <string name="battery_stats_charging_label">Charging</string>
    <!-- [CHAR LIMIT=25] Label for battery stats screen on state graph -->
    <string name="battery_stats_screen_on_label">Screen on</string>
    <!-- [CHAR LIMIT=25] Label for battery stats gps on state graph -->
    <string name="battery_stats_gps_on_label">GPS on</string>
    <!-- [CHAR LIMIT=25] Label for battery stats wifi running state graph -->
    <string name="battery_stats_wifi_running_label">WiFi</string>
    <!-- [CHAR LIMIT=25] Label for battery stats wake lock state graph -->
    <string name="battery_stats_wake_lock_label">Awake</string>
    <!-- [CHAR LIMIT=25] Label for battery stats phone signal strength graph -->
    <string name="battery_stats_phone_signal_label">Mobile network signal</string>
    <!-- Battery usage during last unplugged period -->
    <string name="battery_stats_last_duration">@string/menu_stats_last_unplugged</string>
    <!-- CPU awake time title -->
    <string name="awake">Device awake time</string>
    <!-- Wifi on time -->
    <string name="wifi_on_time">WiFi on time</string>
    <!-- Bluetooth on time -->
    <string name="bluetooth_on_time">WiFi on time</string>
    <!-- Application name and battery usage percentage -->
    <string name="usage_name_percent"><xliff:g id="name">%1$s</xliff:g>" - "
            <xliff:g id="number" example="30">%2$s</xliff:g><xliff:g id="percent" example="%">%%</xliff:g></string>

    <!-- Activity title for battery usage history details -->
    <string name="history_details_title">History details</string>

    <!-- Activity title for battery usage details for an app. or power consumer -->
    <string name="details_title">Use details</string>
    <!-- Subtitle for application/subsystem details -->
    <string name="details_subtitle">Use details</string>
    <!-- Subtitle for possible options -->
    <string name="controls_subtitle">Adjust power use</string>
    <!-- Subtitle for list of packages -->
    <string name="packages_subtitle">Included packages</string>

    <!-- Label for power consumed by the screen -->
    <string name="power_screen">Screen</string>
    <!-- Label for power consumed by WiFi -->
    <string name="power_wifi">WiFi</string>
    <!-- Label for power consumed by Bluetooth -->
    <string name="power_bluetooth">Bluetooth</string>
    <!-- Label for power consumed by Cell idle -->
    <string name="power_cell">Cell standby</string>
    <!-- Label for power consumed by Calling -->
    <string name="power_phone">Voice calls</string>
    <!-- Label for power consumed when Idle -->
    <string name="power_idle" product="tablet">Tablet idle</string>
    <!-- Label for power consumed when Idle -->
    <string name="power_idle" product="default">Phone idle</string>

    <!-- Label for CPU usage time -->
    <string name="usage_type_cpu">CPU total</string>
    <!-- Label for CPU usage in foreground -->
    <string name="usage_type_cpu_foreground">CPU foreground</string>
    <!-- [CHAR LIMIT=25] Label for keeping device from sleeping -->
    <string name="usage_type_wake_lock">Keep awake</string>
    <!-- Label for GPS usage time -->
    <string name="usage_type_gps">GPS</string>
    <!-- [CHAR LIMIT=25] Label for WIFI usage time -->
    <string name="usage_type_wifi_running">WiFi running</string>
    <!-- Label for Phone usage time -->
    <string name="usage_type_phone" product="tablet">Tablet</string>
    <!-- Label for Phone usage time -->
    <string name="usage_type_phone" product="default">Phone</string>
    <!-- Label for Data sent -->
    <string name="usage_type_data_send">Data sent</string>
    <!-- Label for Data received -->
    <string name="usage_type_data_recv">Data received</string>
    <!-- Label for Audio usage time -->
    <string name="usage_type_audio">Audio</string>
    <!-- Label for Video usage time -->
    <string name="usage_type_video">Video</string>
    <!-- Label for time that a feature has been on -->
    <string name="usage_type_on_time">Time on</string>
    <!-- Label for time that there was no cell coverage -->
    <string name="usage_type_no_coverage">Time without a signal</string>
    <!-- Label for force stop action -->
    <string name="battery_action_stop">Force stop</string>
    <!-- Label for app details action -->
    <string name="battery_action_app_details">App info</string>
    <!-- Label for app settings action -->
    <string name="battery_action_app_settings">App settings</string>
    <!-- Label for display settings -->
    <string name="battery_action_display">Screen settings</string>
    <!-- Label for wifi settings -->
    <string name="battery_action_wifi">WiFi settings</string>
    <!-- Label for bluetooth settings -->
    <string name="battery_action_bluetooth">Bluetooth settings</string>

    <!-- Description for voice call detail -->
    <string name="battery_desc_voice">Battery used by voice calls</string>

    <!-- Description for standby detail -->
    <string name="battery_desc_standby" product="tablet">Battery used when tablet is idle</string>
    <!-- Description for standby detail -->
    <string name="battery_desc_standby" product="default">Battery used when phone is idle</string>

    <!-- Description for cell radio detail -->
    <string name="battery_desc_radio">Battery used by cell radio</string>
    <!-- Suggestion to switch to airplane mode to save power -->
    <string name="battery_sugg_radio">Switch to airplane mode to save power in areas with no cell coverage</string>

    <!-- Description for power consumed by display -->
    <string name="battery_desc_display">Battery used by the display and backlight</string>
    <!-- Suggestion for reducing display power -->
    <string name="battery_sugg_display">Reduce the screen brightness and/or screen timeout</string>

    <!-- Description for wifi connectivity -->
    <string name="battery_desc_wifi">Battery used by WiFi</string>
    <!-- Suggestion for wifi connectivity power drain -->
    <string name="battery_sugg_wifi">Turn off WiFi when not using it or when it isn\'t available</string>

    <!-- Description for bluetooth power consumption detail -->
    <string name="battery_desc_bluetooth">Battery used by Bluetooth</string>
    <!-- Suggestion for bluetooth -->
    <string name="battery_sugg_bluetooth_basic">Turn off Bluetooth when you aren\'t using it</string>
    <!-- Suggestion for bluetooth headset -->
    <string name="battery_sugg_bluetooth_headset">Try connecting to a different Bluetooth device</string>

    <!-- [CHAR LIMIT=50] Description for power consumed by applications -->
    <string name="battery_desc_apps">Battery used by app</string>
    <!-- Suggestion for exploring application info to stop or uninstall -->
    <string name="battery_sugg_apps_info">Stop or uninstall the app</string>
    <!-- [CHAR LIMIT=100] Suggestion for getting apps to consume less power due to GPS-->
    <string name="battery_sugg_apps_gps">"Manually control GPS to prevent app from using it"</string>
    <!-- Suggestion for getting apps to consume less power -->
    <string name="battery_sugg_apps_settings">The app may offer settings to reduce battery use</string>

    <!-- Menu label for viewing battery usage since unplugged -->
    <string name="menu_stats_unplugged"><xliff:g id="unplugged">%1$s</xliff:g> since unplugged</string>
    <!-- Menu label for viewing battery usage since unplugged -->
    <string name="menu_stats_last_unplugged">While last unplugged for <xliff:g id="unplugged">%1$s</xliff:g></string>
    <!-- Menu label for viewing battery usage total -->
    <string name="menu_stats_total">Usage totals</string>
    <!-- Menu label for refreshing with latest usage numbers -->
    <string name="menu_stats_refresh">Refresh</string>

    <!-- Label for kernel threads -->
    <string name="process_kernel_label">Android OS</string>
    <!-- Label for mediaserver process -->
    <string name="process_mediaserver_label">Mediaserver</string>

    <!-- Voice input/output settings --><skip />
    <!-- Title of setting on main settings screen. This item will take the user to the screen to tweak settings related to speech functionality -->
    <string name="voice_input_output_settings">Voice input &amp; output</string>
    <!-- Main voice input/output settings screen title -->
    <string name="voice_input_output_settings_title">Voice input &amp; output settings</string>
    <!-- Title of voice search settings list item within voice input/output settings -->
    <string name="voice_search_settings_title">Voice search</string>
    <!-- Title of keyboard settings list item within voice input/output settings -->
    <string name="keyboard_settings_title">Android keyboard</string>
    <!-- Title for the 'voice input' category of voice input/output settings -->
    <string name="voice_category">Speech</string>
    <!-- Title for the voice recognizer setting in voice input/output settings -->
    <string name="recognizer_title">Voice recognizer</string>
    <!-- Title for the link to settings for the chosen voice recognizer in voice input/output settings -->
    <string name="recognizer_settings_title">Voice Search</string>
    <!-- Summary for the link to settings for the chosen voice recognizer in voice input/output settings.
         Would say something like, e.g., "Settings for 'Google'". -->
    <string name="recognizer_settings_summary">Settings for \'<xliff:g id="recognizer_name">%s</xliff:g>\'</string>

    <!-- Text-To-Speech (TTS) settings --><skip />
    <!-- Name of the TTS package as listed by the package manager. -->
    <string name="tts_settings">Text-to-speech settings</string>
    <!-- TTS option item name in the main settings screen -->
    <string name="tts_settings_title">Text-to-speech output</string>
    <!-- On main TTS Settings screen, title for toggle used to force use of default TTS settings -->
    <string name="use_default_tts_settings_title">Always use my settings</string>
    <!-- On main TTS Settings screen, summary for toggle used to force use of default TTS settings -->
    <string name="use_default_tts_settings_summary">Default settings below override app settings</string>
    <!-- On main TTS Settings screen, section header for default TTS settings -->
    <string name="tts_default_settings_section">Default settings</string>
    <!-- On main TTS Settings screen, in default settings section, setting default synthesis engine for synthesized voice -->
    <string name="tts_default_synth_title">Default engine</string>
    <!-- On main TTS Settings screen, summary for default synthesis engine for synthesized voice -->
    <string name="tts_default_synth_summary">Sets the speech synthesis engine to be used for spoken text</string>
    <!-- On main TTS Settings screen, in default settings section, setting default speech rate for synthesized voice -->
    <string name="tts_default_rate_title">Speech rate</string>
    <!-- On main TTS Settings screen, summary for default speech rate for synthesized voice -->
    <string name="tts_default_rate_summary">Speed at which the text is spoken</string>
    <!-- On main TTS Settings screen, in default settings section, setting default pitch for synthesized voice -->
    <string name="tts_default_pitch_title">Pitch</string>
    <!-- On main TTS Settings screen, summary for default pitch for synthesized voice -->
    <string name="tts_default_pitch_summary">Affects the tone of the spoken text</string>
    <!-- On main TTS Settings screen, in default settings section, setting default language for synthesized voice -->
    <string name="tts_default_lang_title">Language</string>
    <!-- On main TTS Settings screen, summary for default language for synthesized voice -->
    <string name="tts_default_lang_summary">Sets the language-specific voice for the spoken text</string>
    <!-- On main TTS Settings screen, triggers playback of an example of speech synthesis -->
    <string name="tts_play_example_title">Listen to an example</string>
    <!-- On main TTS Settings screen, summary for triggering playback of an example of speech synthesis -->
    <string name="tts_play_example_summary">Play a short demonstration of speech synthesis</string>
    <!-- On main TTS Settings screen, click to install required speech synthesis data -->
    <string name="tts_install_data_title">Install voice data</string>
    <!-- On main TTS Settings screen, summary for click to install required speech synthesis data -->
    <string name="tts_install_data_summary">Install the voice data required for speech synthesis</string>
    <!-- On main TTS Settings screen, summary for when required speech synthesis data alrady installed on SD card -->
    <string name="tts_data_installed_summary">Voices required for speech synthesis already properly installed</string>
    <!-- Text spoken by the TTS engine when TTS settings (other than language) have been changed -->
    <string name="tts_settings_changed_demo">Your settings have changed. This is an example of how they sound.</string>
    <!-- Error screen when a selected TTS engine can't run because it's missing components -->
    <string name="tts_engine_error">The engine you selected is unable to run</string>
    <!-- Button text for error screen when a selected TTS engine can't run because it's missing components -->
    <string name="tts_engine_error_config">Configure</string>
    <!-- Button text for error screen when a selected TTS engine can't run because it's missing components -->
    <string name="tts_engine_error_reselect">Choose another engine</string>
    <!-- Warning message about security implications of enabling a TTS engine, displayed as a dialog
         message when the user selects to enable an engine. -->
    <string name="tts_engine_security_warning">This speech synthesis engine may be able to collect
    all the text that will be spoken, including personal data like passwords and credit
    card numbers. It comes from the <xliff:g id="tts_plugin_engine_name">%s</xliff:g> engine.
    Enable the use of this speech synthesis engine?</string>
    <!-- On main TTS Settings screen, text for divider under which all TTS engines are listed -->
    <string name="tts_engines_section">Engines</string>
    <!-- On main TTS Settings screen, text preceded by the TTS engine name, clicking this button will launch the engine settings -->
    <string name="tts_engine_name_settings"><xliff:g id="tts_plugin_engine_name">%s</xliff:g> settings</string>
    <!-- On main TTS Settings screen, text preceded by the TTS engine name to indicate the engine can be used by the user -->
    <string name="tts_engine_name_is_enabled_summary"><xliff:g id="tts_plugin_engine_name">%s</xliff:g> is enabled</string>
    <!-- On main TTS Settings screen, text preceded by the TTS engine name to indicate the engine cannot be used by the user -->
    <string name="tts_engine_name_is_disabled_summary"><xliff:g id="tts_plugin_engine_name">%s</xliff:g> is disabled</string>
    <!-- On the main TTS settings screen, text for a divider under which
         the engine specific settings and the "engine install data" option
         are listed [CHAR LIMIT=30]-->
    <string name="tts_engine_settings_section">Engine settings</string>
    <!-- Title for a preference in the main TTS settings screen, which
         launches the settings screen for a given TTS engine when clicked
         [CHAR LIMIT=30]-->
    <string name="tts_engine_settings_title">Settings for <xliff:g id="tts_engine_name">%s</xliff:g></string>
    <!-- On Pico TTS Settings screen, text to mark the section for the various languages and voices that are available -->
    <string name="pico_languages_and_voices">Languages and voices</string>
    <!-- On Pico TTS Settings screen, text to mark a voice as installed -->
    <string name="pico_installed">Installed</string>
    <!-- On Pico TTS Settings screen, text to mark a voice as not installed -->
    <string name="pico_not_installed">Not installed</string>
    <!-- On Pico TTS Settings screen, summary text to indicate that a voice is female -->
    <string name="pico_voice_summary_female">Female</string>
    <!-- On Pico TTS Settings screen, summary text to indicate that a voice is male -->
    <string name="pico_voice_summary_male">Male</string>
    <!-- [CHAR LIMIT=33] Notification title that appears when the installation of a new TTS engine completed -->
    <string name="tts_notif_engine_install_title">Speech synthesis engine installed</string>
    <!-- [CHAR LIMIT=30] Notification message that appears after the user has installed a new TTS engine,
         to warn the user that this engine cannot be used before the checkbox for that engine
         in TTS settings is checked. -->
    <string name="tts_notif_engine_install_message">Enable new engine before use</string>
    <!-- [CHAR LIMIT=150] Text for screen readers / accessibility programs for
         the image that launches the TTS engine settings when clicked. -->
    <string name="tts_engine_settings_button">Launch engine settings</string>
    <!-- [CHAR LIMIT=50] The text for the settings section that users to set a
         preferred text to speech engine -->
    <string name="tts_engine_preference_section_title">Preferred engine</string>
    <!-- [CHAR LIMIT=50] Title of the settings section that displays general preferences
         that are applicable to all engines, such as the speech rate -->
    <string name="tts_general_section_title">General</string>

    <!-- Power Control Widget -->
    <string name="gadget_title">Power control</string>
    <string name="gadget_toggle_wifi">Updating WiFi setting</string>
    <string name="gadget_toggle_bluetooth">Updating Bluetooth setting</string>

    <!-- Title of preference to enter the VPN settings activity -->
    <string name="vpn_settings_title">VPN</string>

    <!-- Title of preference group for credential storage settings [CHAR LIMIT=30] -->
    <string name="credentials_title">Credential storage</string>
    <!-- Title of preference to install certificates from SD card [CHAR LIMIT=30] -->
    <string name="credentials_install" product="nosdcard">Install from storage</string>
    <!-- Title of preference to install certificates from SD card [CHAR LIMIT=30] -->
    <string name="credentials_install" product="default">Install from SD card</string>
    <!-- Summary of preference to install certificates from SD card [CHAR LIMIT=NONE] -->
    <string name="credentials_install_summary" product="nosdcard">Install certificates from storage</string>
    <!-- Summary of preference to install certificates from SD card [CHAR LIMIT=NONE] -->
    <string name="credentials_install_summary" product="default">Install certificates from SD card</string>
    <!-- Title of preference to reset credential storage [CHAR LIMIT=30] -->
    <string name="credentials_reset">Clear credentials</string>
    <!-- Summary of preference to reset credential storage [CHAR LIMIT=NONE] -->
    <string name="credentials_reset_summary">Remove all certificates</string>
    <!-- Title of preference to display trusted credentials (aka CA certificates) [CHAR LIMIT=30] -->
    <string name="trusted_credentials">Trusted credentials</string>
    <!-- Summary of preference to display trusted credentials (aka CA certificates) [CHAR LIMIT=NONE] -->
    <string name="trusted_credentials_summary">Display trusted CA certificates</string>

    <!-- Title of dialog to enable credential storage [CHAR LIMIT=30] -->
    <string name="credentials_unlock"></string>
    <!-- Description of dialog to enable credential storage [CHAR LIMIT=NONE] -->
    <string name="credentials_unlock_hint">Type the password for credential storage.</string>
    <!-- Description of the input box for the old password [CHAR LIMIT=30] -->
    <string name="credentials_old_password">Current password:</string>
    <!-- Description of dialog to reset credential storage [CHAR LIMIT=NONE] -->
    <string name="credentials_reset_hint">Remove all the contents?</string>
    <string name="credentials_password_too_short">The password must have at least 8 characters.</string>
    <!-- Error message [CHAR LIMIT=NONE] -->
    <string name="credentials_wrong_password">Incorrect password.</string>
    <!-- Error message [CHAR LIMIT=NONE] -->
    <string name="credentials_reset_warning">Incorrect password. You have one more chance before credential storage is erased.</string>
    <!-- Error message [CHAR LIMIT=NONE] -->
    <string name="credentials_reset_warning_plural">Incorrect password. You have <xliff:g id="number" example="5">%1$d</xliff:g> more chances before credential storage is erased.</string>
    <!-- Toast message [CHAR LIMIT=30] -->
    <string name="credentials_erased">Credential storage is erased.</string>
    <!-- Toast message [CHAR LIMIT=30] when credential storage containing private keys and certificates could not be erased (opposite of string credentials_erased) -->
    <string name="credentials_not_erased">Credential storage couldn\'t be erased.</string>
    <!-- Toast message [CHAR LIMIT=30] -->
    <string name="credentials_enabled">Credential storage is enabled.</string>
    <!-- Description of dialog to explain that a lock screen password is required to use credential storage [CHAR LIMIT=NONE] -->
    <string name="credentials_configure_lock_screen_hint">You must set a lock screen PIN or password before you can use credential storage.</string>

    <!-- Sound settings screen, setting check box label -->
    <string name="emergency_tone_title">Emergency tone</string>
    <!-- Sound settings screen, setting option summary text -->
    <string name="emergency_tone_summary">Set behavior when an emergency call is placed</string>

    <!-- Backup and reset Settings screen --><skip />
    <!-- Backup and reset settings menu title -->
    <string name="privacy_settings">Backup &amp; reset</string>
    <!-- Privacy settings activity title -->
    <string name="privacy_settings_title">Backup &amp; reset</string>
    <!-- Backup section title -->
    <string name="backup_section_title">Backup &amp; restore</string>
    <!-- Personal data section title -->
    <string name="personal_data_section_title">Personal data</string>
    <!-- Backup data menu title -->
    <string name="backup_data_title">Back up my data</string>
    <!-- Summary text of the "back up data" setting -->
    <string name="backup_data_summary">Back up app data, WiFi passwords, and other settings to Google servers</string>
    <!-- Configure backup account options menu title [CHAR LIMIT=25]-->
    <string name="backup_configure_account_title">Backup account</string>
    <!-- Default summary text of the "Configure backup account" setting [CHAR LIMIT=80]-->
    <string name="backup_configure_account_default_summary">No account is currently storing backed up data</string>
    <!-- Auto-restore menu title -->
    <string name="auto_restore_title">Automatic restore</string>
    <!-- Summary text of the "automatic restore" setting -->
    <string name="auto_restore_summary">When reinstalling an app, restore backed up settings and data</string>

    <!-- Local (desktop) backup password menu title [CHAR LIMIT=25] -->
    <string name="local_backup_password_title">Desktop backup password</string>
    <!-- Summary text of the "local backup password" setting when the user has not supplied a password -->
    <string name="local_backup_password_summary_none">Desktop full backups aren\'t currently protected.</string>
    <!-- Summary text of the "local backup password" setting when the user has already supplied a password -->
    <string name="local_backup_password_summary_change">Select to change or remove the password for desktop full backups</string>

    <!-- Dialog title for confirmation to erase backup data from server -->
    <string name="backup_erase_dialog_title"></string>
    <!-- Dialog title for confirmation to erase backup data from server -->
    <string name="backup_erase_dialog_message">Stop backing up your WiFi passwords, bookmarks, other settings, and app data, plus erase all copies on Google servers?</string>

    <!-- Device admin settings screen --><skip />
    <!-- Device admin settings activity title -->
    <string name="device_admin_settings_title">Device administration settings</string>
    <!-- Label for screen showing the active device policy -->
    <string name="active_device_admin_msg">Device administrator</string>
    <!-- Label for button to remove the active device admin -->
    <string name="remove_device_admin">Deactivate</string>
    <!-- Label for screen showing to select device policy -->
    <string name="select_device_admin_msg">Device administrators</string>
    <!-- Message when there are no available device admins to display -->
    <string name="no_device_admins">No available device administrators</string>

    <!-- Label for screen showing to add device policy -->
    <string name="add_device_admin_msg">Activate device administrator?</string>
    <!-- Label for button to set the active device admin -->
    <string name="add_device_admin">Activate</string>
    <!-- Device admin add activity title -->
    <string name="device_admin_add_title">Device administrator</string>
    <!-- Device admin warning message about policies an admin can use -->
    <string name="device_admin_warning">Activating this administrator will allow
        the app <xliff:g id="app_name">%1$s</xliff:g> to perform the
        following operations:</string>
    <!-- Device admin warning message about policies an admin can use -->
    <string name="device_admin_status">This administrator is active and allows
        the app <xliff:g id="app_name">%1$s</xliff:g> to perform the
        following operations:</string>

    <!-- Name to assign to a Network Access Point that was saved without a name -->
    <string name="untitled_apn">Untitled</string>

    <string name="sound_category_sound_title">General</string>
    <string name="sound_category_calls_and_notification_title">Ringtone &amp; notifications</string>
    <string name="sound_category_notification_title">Notifications</string>
    <string name="sound_category_feedback_title">System</string>

    <!-- Wifi Setup For Setup Wizard with XL screen -->
    <!-- Title shown in Wifi Setup Wizard with XL screen -->
    <string name="wifi_setup_title">WiFi setup</string>
    <!-- Title shown in Wifi Setup Wizard with XL screen when
         a user is configuring password for a network.
         The argument should be the name of the network.
         [CHAR LIMIT=50] -->
    <string name="wifi_setup_title_editing_network">Connect to WiFi network <xliff:g id="network_name" example="Happy Mobile">%s</xliff:g></string>
    <!-- Title shown in Wifi Setup For Setup Wizard with XL screen when
         the device is connecting a network the user specified.
         The argument should be the name of the network.
         [CHAR LIMIT=50] -->
    <string name="wifi_setup_title_connecting_network">Connecting to WiFi network <xliff:g id="network_name" example="Happy Mobile">%s</xliff:g>\u2026</string>
    <!-- Title shown in Wifi Setup For Setup Wizard with XL screen when
         the device successfully connected to a network the user specified.
         The argument should be the name of the network.
         [CHAR LIMIT=50] -->
    <string name="wifi_setup_title_connected_network">Connected to WiFi network <xliff:g id="network_name" example="Happy Mobile">%s</xliff:g></string>
    <!-- Title shown in Wifi Setup For Setup Wizard with XL screen when
         a user is adding a network.
         [CHAR LIMIT=50] -->
    <string name="wifi_setup_title_add_network">Add a network</string>
    <!-- Text message shown when Wifi is not connected.
         Used in Wifi Setup For Setup Wizard with XL screen. -->
    <string name="wifi_setup_not_connected">Not connected</string>
    <!-- Button message shown on the button adding manual setting.
         Used in Wifi Setup For Setup Wizard with XL screen. -->
    <string name="wifi_setup_add_network">Add network</string>
    <!-- Button message shown on the button refreshing a list of network.
         Used in Wifi Setup For Setup Wizard with XL screen. -->
    <string name="wifi_setup_refresh_list">Refresh list</string>
    <!-- Button message shown on the button enabling users skip Wifi Setup.
         Used in Wifi Setup For Setup Wizard with XL screen. -->
    <string name="wifi_setup_skip">Skip</string>
    <!-- Button message shown on the button enabling users go the next step.
         Used in Wifi Setup For Setup Wizard with XL screen. -->
    <string name="wifi_setup_next">Next</string>
    <!-- Button label to go back to previous screen. Used in SetupWizard for
      XLarge screen [CHAR LIMIT=10] -->
    <string name="wifi_setup_back">Back</string>
    <!-- Button label to show detailed dialog for a selected WiFi settings.
         Used in SetupWizard for XLarge screen [CHAR LIMIT=20] -->
    <string name="wifi_setup_detail">Network details</string>
    <!-- Button label to connect to a Wi-Fi network.
         Used in SetupWizard for XLarge screen [CHAR LIMIT=10] -->
    <string name="wifi_setup_connect">Connect</string>
    <!-- Button label to delete a Wi-Fi network.
         Used in SetupWizard for XLarge screen [CHAR LIMIT=10] -->
    <string name="wifi_setup_forget">Forget</string>
    <!-- Button label to save a Wi-Fi network configuration.
         Used in SetupWizard for XLarge screen [CHAR LIMIT=10] -->
    <string name="wifi_setup_save">Save</string>
    <!-- Button label to dismiss the dialog.
         Used in SetupWizard for XLarge screen [CHAR LIMIT=10] -->
    <string name="wifi_setup_cancel">Cancel</string>

    <!-- The message shown above available networks when the device is scanning
         available networks [CHAR LIMIT=35] -->
    <string name="wifi_setup_status_scanning">Scanning networks\u2026</string>
    <!-- Message shown above available network when there's no connected network.
         Used in Wifi Setup For Setup Wizard with XL screen. -->
    <string name="wifi_setup_status_select_network">Touch a network to connect to it</string>
    <!-- Message shown above available networks when a user clicked one of available
         networks and the UI is showing one possible existing network.
         Used in Wifi Setup. -->
    <string name="wifi_setup_status_existing_network">Connect to existing network</string>
    <!-- Message shown above available networks when a user clicked one of available
         networks and the network doesn't require configuration (e.g. password)
         Used in Wifi Setup with XL screen. [CHAR LIMIT=35] -->
    <string name="wifi_setup_status_unsecured_network">Connect to unsecured network</string>
    <!-- Message shown above available networks when a user clicked one of available
         networks and the UI is prompting the user to edit the network configuration
         if needed. Used in Wifi Setup with XL screen. [CHAR LIMIT=35] -->
    <string name="wifi_setup_status_edit_network">Type network configuration</string>
    <!-- The message shown above available networks when a user clicked "Add network"
         button. Used in Wifi Setup For Setup Wizard with XL screen. [CHAR LIMIT=35] -->
    <string name="wifi_setup_status_new_network">Connect to new network</string>
    <!-- The message shown above available networks when a user clicked one of available
         networks or created another profile and he/she is waiting for the connection
         is established.
         Used in Wifi Setup For Setup Wizard with XL screen. [CHAR LIMIT=35] -->
    <string name="wifi_setup_status_connecting">Connecting\u2026</string>
    <!-- The message shown above available networks when connection is established,
         letting a user to proceed to the next step of the SetupWizard.
         Used in Wifi Setup For Setup Wizard with XL screen. [CHAR LIMIT=35] -->
    <string name="wifi_setup_status_proceed_to_next">Go to the next step</string>
    <!-- The message shown above available networks when a user clicked a network secured by
         EAP. We don't allow the user to connect it.
         Used in Wifi Setup For Setup Wizard with XL screen. [CHAR LIMIT=35] -->
    <string name="wifi_setup_status_eap_not_supported">EAP isn\'t supported.</string>
    <!-- Message shown when users select EAP in WiFi settings for SetupWizard,
         saying EAP can't be configured in SetupWizard flow.
         [CHAR LIMIT=NONE] -->
    <string name="wifi_setup_eap_not_supported">You can\'t configure an EAP WiFi connection during setup. After setup, you can do that in Settings &gt; Wireless &amp; networks.</string>
    <!-- Message shown when the device is connecting a network [CHAR LIMIT=NONE] -->
    <string name="wifi_setup_description_connecting">Connecting can take a few minutes\u2026</string>
    <!-- Message shown when the device is connected to a network [CHAR LIMIT=NONE] -->
    <string name="wifi_setup_description_connected">Touch <b>Next</b> to continue with setup.\n\nTouch <b>Back</b> to connect to a different WiFi network.</string>

    <!-- Do not translate. This is a stub which will be removed soon. -->
    <string name="time_zone_auto_stub" translatable="false">Select Time Zone</string>

    <!-- Content description of the enabled sync icon for accessibility. [CHAR LIMIT=NONE] -->
    <string name="accessibility_sync_enabled">Sync enabled</string>
    <!-- Content description of the disabled sync icon for accessibility. [CHAR LIMIT=NONE] -->
    <string name="accessibility_sync_disabled">Sync disabled</string>
    <!-- Content description of the disabled sync icon for accessibility. [CHAR LIMIT=NONE] -->
    <string name="accessibility_sync_error">Sync error.</string>

    <!-- Account specific sync settings title [CHAR LIMIT=35] -->
    <string name="account_sync_settings_title">Sync settings</string>
    <!-- Message when sync is currently failing [CHAR LIMIT=100] -->
    <string name="sync_is_failing">Sync is currently experiencing problems. It will be back shortly.</string>
    <!-- Button label to add an account [CHAR LIMIT=20] -->
    <string name="add_account_label">Add account</string>
    <!-- Data synchronization settings screen, title of setting that controls whether background data should be used [CHAR LIMIT=30] -->
    <string name="background_data">Background data</string>
    <!-- Data synchronization settings screen, summary of setting that controls whether background data should be used [CHAR LIMIT=60] -->
    <string name="background_data_summary">Apps can sync, send, and receive data at any time</string>
    <!-- Data synchronization settings screen, title of dialog that confirms the user's unchecking of background data [CHAR LIMIT=20] -->
    <string name="background_data_dialog_title">Disable background data?</string>
    <!-- Data synchronization settings screen, message of dialog that confirms the user's unchecking of background data [CHAR LIMIT=200] -->
    <string name="background_data_dialog_message">Disabling background data extends battery life and lowers data use. Some apps may still use the background data connection.</string>
    <!-- Title for a checkbox that enables data synchronization in the account and sync screen [CHAR LIMIT=35] -->
    <string name="sync_automatically">Auto-sync app data</string>

    <!-- Sync status messages on Accounts & Synchronization settings --><skip />
    <!-- Sync status shown when sync is enabled [CHAR LIMIT=25] -->
    <string name="sync_enabled">Sync is ON</string>
    <!-- Sync status shown when sync is disabled [CHAR LIMIT=25] -->
    <string name="sync_disabled">Sync is OFF</string>
    <!-- Sync status shown when last sync resulted in an error [CHAR LIMIT=25] -->
    <string name="sync_error">Sync error</string>

    <!-- Data synchronization settings screen, setting option name -->
    <string name="settings_backup">Back up settings</string>
    <!-- Data synchronization settings screen, setting option summary text when check box is selected -->
    <string name="settings_backup_summary">Back up my settings</string>
    <!-- Data synchronization settings screen, menu option -->
    <string name="sync_menu_sync_now">Sync now</string>
    <!-- Data synchronization settings screen, menu option -->
    <string name="sync_menu_sync_cancel">Cancel sync</string>
    <!-- Data synchronization settings screen, summary of a sync provider (for example, Gmail) when autosync is off and the user wants to do a one-time sync. -->
    <string name="sync_one_time_sync">Touch to sync now<xliff:g id="last_sync_time">\n%1$s</xliff:g></string>
    <!-- Data synchronization settings screen, checkbox setting option name. Controls whether Gmail should be synced.  Should use "Gmail" to refer to this app.-->
    <string name="sync_gmail">Gmail</string>
    <!-- Data synchronization settings screen, checkbox setting option name. Controls whether Calendar shoudl be synced. -->
    <string name="sync_calendar">Calendar</string>
    <!-- Data synchronization settings screen, checkbox setting option name -->
    <string name="sync_contacts">Contacts</string>
    <!-- Message introducing the user to Google Sync. -->
    <string name="sync_plug"><font fgcolor="#ffffffff">Welcome to Google sync!</font>
    \nA Google approach to synchronizing data to allow access to your contacts, appointments, and more from wherever you are.
    </string>

    <!-- Header title for those settings relating to application syncing. -->
    <string name="header_application_sync_settings">App sync settings</string>

    <!-- Header for data and synchronization -->
    <string name="header_data_and_synchronization">Data &amp; synchronization</string>
    <!-- Preference item that lets the user change password -->
    <string name="preference_change_password_title">Change password</string>
    <!-- Header that appears at the top of Account Settings screen -->
    <string name="header_account_settings">Account settings</string>
    <!-- Button label to remove current account -->
    <string name="remove_account_label">Remove account</string>
    <!-- Title shown in AddAccount -->
    <string name="header_add_an_account">Add an account</string>
    <!-- Button shown when this activity is run from SetupWizard -->
    <string name="finish_button_label">Finish</string>
    <!-- Title of remove message for remove account dialog -->
    <string name="really_remove_account_title">Remove account?</string>
    <!-- Remove account message in dialog [CHAR LIMIT=NONE] -->
    <string name="really_remove_account_message" product="tablet">Removing this account will delete all of its messages, contacts, and other data from the tablet!</string>
    <!-- Remove account message in dialog [CHAR LIMIT=NONE] -->
    <string name="really_remove_account_message" product="default">Removing this account will delete all of its messages, contacts, and other data from the phone!</string>
    <!-- This is shown if the autheticator for a given account fails to remove it. -->
    <string name="remove_account_failed" product="tablet">This account is required by some apps. You can only remove it by resetting the tablet to factory defaults (which deletes all your personal data) in Settings &gt; Backup &amp; reset.</string>
    <!-- This is shown if the autheticator for a given account fails to remove it. -->
    <string name="remove_account_failed" product="default">This account is required by some apps. You can only remove it by resetting the phone to factory defaults (which deletes all your personal data) in Settings &gt; Backup &amp; reset.</string>
    <!-- What to show in messaging that refers to this provider, e.g. AccountSyncSettings -->
    <string name="provider_label">Push subscriptions</string>
    <!-- Formatter in AccountSyncSettings for each application we wish to synchronize, e.g. "Sync Calendar" -->
    <string name="sync_item_title">Sync <xliff:g id="authority" example="Calendar">%s</xliff:g></string>
    <!-- Title of dialog shown when you can't manually sync an item because it's disabled -->
    <string name="cant_sync_dialog_title">Can\'t manually sync</string>
    <!-- Messaage shown in dialog when you can't manually sync -->
    <string name="cant_sync_dialog_message">Sync for this item is currently disabled. To change this setting, temporarily turn on background data and automatic sync.</string>

    <!-- This is displayed to the user when the device needs to be decrypted -->
    <string name="enter_password">Type password to decrypt storage</string>
    <!-- This is displayed when the password is entered incorrectly -->
    <string name="try_again">Try again.</string>
    <!-- This error message is displayed when the vpn profile is going to be saved but the vpn service is busy [CHAR LIMIT=NONE] -->
    <string name="service_busy">The service is busy. Try again.</string>

    <!-- the following are for Settings Storage screen -->
    <!-- Menu item/button 'delete' -->
    <string name="delete">Delete</string>
    <!-- Misc files [CHAR LIMIT=25] -->
    <string name="misc_files">Misc files</string>
    <!-- number of misc files selected [CHAR LIMIT=40] -->
    <string name="misc_files_selected_count">selected <xliff:g id="number" example="3">%1$d</xliff:g> out of <xliff:g id="total" example="15">%2$d</xliff:g></string>
    <!-- number of bytes represented by the selected misc files [CHAR LIMIT=40] -->
    <string name="misc_files_selected_count_bytes"><xliff:g id="number" example="3.25MB">%1$s</xliff:g> out of <xliff:g id="total" example="15.25MB">%2$s</xliff:g></string>
    <!--  action to select all [CHAR LIMIT=30] -->
    <string name="select_all">Select all</string>

    <!-- HDCP checking title, used for debug purposes only. [CHAR LIMIT=25] -->
    <string name="hdcp_checking_title">HDCP checking</string>
    <!-- HDCP checking dialog title, used for debug purposes only. [CHAR LIMIT=25] -->
    <string name="hdcp_checking_dialog_title">Set HDCP checking behavior</string>

    <!-- Preference category for user interface debugging development settings. [CHAR LIMIT=25] -->
    <string name="debug_ui_category">User interface</string>

    <!-- UI debug setting: always enable strict mode? [CHAR LIMIT=25] -->
    <string name="strict_mode">Strict mode enabled</string>
    <!-- UI debug setting: show strict mode summary [CHAR LIMIT=50] -->
    <string name="strict_mode_summary">Flash screen when apps do long operations
            on main thread</string>

    <!-- UI debug setting: show pointer location? [CHAR LIMIT=25] -->
    <string name="pointer_location">Pointer location</string>
    <!-- UI debug setting: show pointer location summary [CHAR LIMIT=50] -->
    <string name="pointer_location_summary">Screen overlay showing current touch data</string>

    <!-- UI debug setting: show touches? [CHAR LIMIT=25] -->
    <string name="show_touches">Show touches</string>
    <!-- UI debug setting: show touches location summary [CHAR LIMIT=50] -->
    <string name="show_touches_summary">Show visual feedback for touches</string>

    <!-- UI debug setting: show where screen updates happen? [CHAR LIMIT=25] -->
    <string name="show_screen_updates">Show screen updates</string>
    <!-- UI debug setting: show screen updates summary [CHAR LIMIT=50] -->
    <string name="show_screen_updates_summary">Flash areas of screen when they update</string>

    <!-- UI debug setting: show how CPU is being used? [CHAR LIMIT=25] -->
    <string name="show_cpu_usage">Show CPU usage</string>
    <!-- UI debug setting: show cpu usage summary [CHAR LIMIT=50] -->
    <string name="show_cpu_usage_summary">Screen overlay showing current CPU usage</string>

    <!-- UI debug setting: force hardware acceleration to render apps [CHAR LIMIT=25] -->
    <string name="force_hw_ui">Force GPU rendering</string>
    <!-- UI debug setting: force hardware acceleration summary [CHAR LIMIT=50] -->
    <string name="force_hw_ui_summary">Use 2D hardware acceleration in applications</string>

    <!-- UI debug setting: scaling factor for window animations [CHAR LIMIT=25] -->
    <string name="window_animation_scale_title">Window animation scale</string>

    <!-- UI debug setting: scaling factor for transition animations [CHAR LIMIT=25] -->
    <string name="transition_animation_scale_title">Transition animation scale</string>

    <!-- Preference category for application debugging development settings. [CHAR LIMIT=25] -->
    <string name="debug_applications_category">Apps</string>

    <!-- UI debug setting: immediately destroy activities? [CHAR LIMIT=25] -->
    <string name="immediately_destroy_activities">Don\'t keep activities</string>
    <!-- UI debug setting: immediately destroy activities summary [CHAR LIMIT=50] -->
    <string name="immediately_destroy_activities_summary">Destroy every activity as soon as
            the user leaves it</string>

    <!-- UI debug setting: limit number of running background processes [CHAR LIMIT=25] -->
    <string name="app_process_limit_title">Background process limit</string>

    <!-- UI debug setting: show all ANRs? [CHAR LIMIT=25] -->
    <string name="show_all_anrs">Show all ANRs</string>
    <!-- UI debug setting: show all ANRs summary [CHAR LIMIT=50] -->
    <string name="show_all_anrs_summary">Show App Not Responding dialog
        for background apps</string>

    <!-- Activity title for network data usage summary. [CHAR LIMIT=25] -->
    <string name="data_usage_summary_title">Data usage</string>
    <!-- Title for option to pick visible time range from a list available usage periods. [CHAR LIMIT=25] -->
    <string name="data_usage_cycle">Data usage cycle</string>
    <!-- Title for checkbox menu option to enable mobile data when roaming. [CHAR LIMIT=32] -->
    <string name="data_usage_menu_roaming">Data roaming</string>
    <!-- Title for checkbox menu option to restrict background data usage. [CHAR LIMIT=20] -->
    <string name="data_usage_menu_restrict_background">Restrict background data</string>
    <!-- Title for checkbox menu option to show 4G mobile data usage separate from other mobile data usage. [CHAR LIMIT=32] -->
    <string name="data_usage_menu_split_4g">Separate 4G usage</string>
    <!-- Title for checkbox menu option to show Wi-Fi data usage. [CHAR LIMIT=32] -->
    <string name="data_usage_menu_show_wifi">Show WiFi usage</string>
    <!-- Title for checkbox menu option to show Ethernet data usage. [CHAR LIMIT=32] -->
    <string name="data_usage_menu_show_ethernet">Show Ethernet usage</string>
    <!-- Title for option to change data usage cycle day. [CHAR LIMIT=32] -->
    <string name="data_usage_change_cycle">Change cycle\u2026</string>
    <!-- Body of dialog prompting user to change numerical day of month that data usage cycle should reset. [CHAR LIMIT=64] -->
    <string name="data_usage_pick_cycle_day">Day of month to reset data usage cycle:</string>
    <!-- Label shown when no applications used data during selected time period. [CHAR LIMIT=48] -->
    <string name="data_usage_empty">No apps used data during this period.</string>
    <!-- Label for data usage occuring while application in foreground. [CHAR LIMIT=48] -->
    <string name="data_usage_label_foreground">Foreground</string>
    <!-- Label for data usage occuring while application in background. [CHAR LIMIT=48] -->
    <string name="data_usage_label_background">Background</string>

    <!-- Disclaimer that contrasts device versus carrier reporting. [CHAR LIMIT=80] -->
    <string name="data_usage_disclaimer" product="tablet">Measured by your tablet. Your carrier\'s data usage accounting may differ.</string>
    <!-- Disclaimer that contrasts device versus carrier reporting. [CHAR LIMIT=80] -->
    <string name="data_usage_disclaimer" product="default">Measured by your phone. Your carrier\'s data usage accounting may differ.</string>

    <!-- Body of dialog shown to request confirmation that mobile data will be disabled. [CHAR LIMIT=NONE] -->
    <string name="data_usage_disable_mobile">Disable mobile data?</string>
    <!-- Checkbox label that will disable mobile network data connection when user-defined limit is reached. [CHAR LIMIT=32] -->
    <string name="data_usage_disable_mobile_limit">Set mobile data limit</string>
    <!-- Checkbox label that will disable 4G network data connection when user-defined limit is reached. [CHAR LIMIT=32] -->
    <string name="data_usage_disable_4g_limit">Set 4G data limit</string>
    <!-- Checkbox label that will disable 2G-3G network data connection when user-defined limit is reached. [CHAR LIMIT=32] -->
    <string name="data_usage_disable_3g_limit">Set 2G-3G data limit</string>
    <!-- Checkbox label that will disable Wi-Fi network data connection when user-defined limit is reached. [CHAR LIMIT=32] -->
    <string name="data_usage_disable_wifi_limit">Set WiFi data limit</string>

    <!-- Tab title for showing Wi-Fi data usage. [CHAR LIMIT=10] -->
    <string name="data_usage_tab_wifi">WiFi</string>
    <!-- Tab title for showing Ethernet data usage. [CHAR LIMIT=10] -->
    <string name="data_usage_tab_ethernet">Ethernet</string>
    <!-- Tab title for showing combined mobile data usage. [CHAR LIMIT=10] -->
    <string name="data_usage_tab_mobile">Mobile</string>
    <!-- Tab title for showing 4G data usage. [CHAR LIMIT=10] -->
    <string name="data_usage_tab_4g">4G</string>
    <!-- Tab title for showing 2G and 3G data usage. [CHAR LIMIT=10] -->
    <string name="data_usage_tab_3g">2G-3G</string>

    <!-- Title shown when current operation applies to mobile networks. [CHAR LIMIT=10] -->
    <string name="data_usage_list_mobile">mobile</string>
    <!-- Title shown when current operation applies to no networks. [CHAR LIMIT=10] -->
    <string name="data_usage_list_none">none</string>

    <!-- Toggle switch title for enabling all mobile data network connections. [CHAR LIMIT=32] -->
    <string name="data_usage_enable_mobile">Mobile data</string>
    <!-- Toggle switch title for enabling 2G and 3G data network connections. [CHAR LIMIT=32] -->
    <string name="data_usage_enable_3g">2G-3G data</string>
    <!-- Toggle switch title for enabling 4G data network connection. [CHAR LIMIT=32] -->
    <string name="data_usage_enable_4g">4G data</string>

    <!-- Button title for launching application-specific data usage settings. [CHAR LIMIT=32] -->
    <string name="data_usage_app_settings">View app settings</string>
    <!-- Checkbox label that restricts background data usage of a specific application. [CHAR LIMIT=32] -->
    <string name="data_usage_app_restrict_background">Restrict background data</string>
    <!-- Summary message for checkbox that restricts background data usage of a specific application. [CHAR LIMIT=64] -->
    <string name="data_usage_app_restrict_background_summary">Disable background data on mobile data network only. WiFi will be used if available.</string>
    <!-- Summary message for checkbox that restricts background data usage of a specific application when no networks have been limited. [CHAR LIMIT=64] -->
    <string name="data_usage_app_restrict_background_summary_disabled">To restrict background data for this app, first set a mobile data limit.</string>
    <!-- Title of dialog shown when user restricts background data usage of a specific application. [CHAR LIMIT=48] -->
    <string name="data_usage_app_restrict_dialog_title">Restrict background data?</string>
    <!-- Body of dialog shown when user restricts background data usage of a specific application. [CHAR LIMIT=NONE] -->
    <string name="data_usage_app_restrict_dialog">This feature may cause an app that depends on background data to stop working when WiFi isn\'t available.\n\nYou can find more appropriate data usage controls in the settings available within the app.</string>
    <!-- Body of dialog shown when user attempts to restrict background data before a network data limit has been set. [CHAR LIMIT=NONE] -->
    <string name="data_usage_restrict_denied_dialog">Restricting background data is possible only when you\'ve set a mobile data limit.</string>

    <!-- Title of dialog for editing data usage cycle reset date. [CHAR LIMIT=48] -->
    <string name="data_usage_cycle_editor_title">Usage cycle reset date</string>
    <!-- Subtitle of dialog for editing data usage cycle reset date. [CHAR LIMIT=32] -->
    <string name="data_usage_cycle_editor_subtitle">Date of each month:</string>
    <!-- Positive button title for data usage cycle editor, confirming that changes should be saved. [CHAR LIMIT=32] -->
    <string name="data_usage_cycle_editor_positive">Set</string>

    <!-- Title of dialog for editing data usage warning in bytes. [CHAR LIMIT=48] -->
    <string name="data_usage_warning_editor_title">Set data usage warning</string>
    <!-- Title of dialog for editing data usage limit in bytes. [CHAR LIMIT=48] -->
    <string name="data_usage_limit_editor_title">Set data usage limit</string>

    <!-- Title of dialog shown before user limits data usage. [CHAR LIMIT=48] -->
    <string name="data_usage_limit_dialog_title">Limiting data usage</string>
    <!-- Body of dialog shown before user limits mobile data usage. [CHAR LIMIT=NONE] -->
    <string name="data_usage_limit_dialog" product="tablet">Your <xliff:g id="networks" example="mobile">%1$s</xliff:g> data connection will be disabled when the specified limit is reached.\n\nSince data usage is measured by your tablet, and your carrier may account for usage differently, consider using a conservative limit.</string>
    <!-- Body of dialog shown before user limits mobile data usage. [CHAR LIMIT=NONE] -->
    <string name="data_usage_limit_dialog" product="default">Your <xliff:g id="networks" example="mobile">%1$s</xliff:g> data connection will be disabled when the specified limit is reached.\n\nSince data usage is measured by your phone, and your carrier may account for usage differently, consider using a conservative limit.</string>

    <!-- Title of dialog shown before user restricts background data usage. [CHAR LIMIT=48] -->
    <string name="data_usage_restrict_background_title">Restrict background data?</string>
    <!-- Body of dialog shown before user restricts background data usage. [CHAR LIMIT=NONE] -->
    <string name="data_usage_restrict_background">If you restrict background mobile data, some apps and services won\'t work unless you\'re connected to a WiFi network.</string>

    <!-- Label displaying current network data usage warning threshold. [CHAR LIMIT=18] -->
    <string name="data_usage_sweep_warning"><font size="21"><xliff:g id="number" example="128">^1</xliff:g></font> <font size="9"><xliff:g id="unit" example="KB">^2</xliff:g></font>\n<font size="12">warning</font></string>
    <!-- Label displaying current network data usage limit threshold. [CHAR LIMIT=18] -->
    <string name="data_usage_sweep_limit"><font size="21"><xliff:g id="number" example="128">^1</xliff:g></font> <font size="9"><xliff:g id="unit" example="KB">^2</xliff:g></font>\n<font size="12">limit</font></string>

    <!-- Title of data usage item that represents all uninstalled applications. [CHAR LIMIT=48] -->
    <string name="data_usage_uninstalled_apps">Removed apps</string>
    <!-- Combination of total network bytes sent and received by an application. [CHAR LIMIT=NONE] -->
    <string name="data_usage_received_sent"><xliff:g id="received" example="128KB">%1$s</xliff:g> received, <xliff:g id="sent" example="1.3GB">%2$s</xliff:g> sent</string>
    <!-- Label displaying total network data transferred during a specific time period. [CHAR LIMIT=64] -->
    <string name="data_usage_total_during_range"><xliff:g id="range" example="Jul 1 - Jul 31">%2$s</xliff:g>: about <xliff:g id="total" example="128KB">%1$s</xliff:g> used</string>

    <!-- Button at the bottom of the CryptKeeper screen to make an emergency call. -->
    <string name="cryptkeeper_emergency_call">Emergency call</string>
    <!-- Button at the bottom of the CryptKeeper screen that lets the user return to a call -->
    <string name="cryptkeeper_return_to_call">Return to call</string>

    <!-- Input label for the name of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_name">Name</string>
    <!-- Input label for the type of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_type">Type</string>
    <!-- Input label for the server address of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_server">Server address</string>
    <!-- Checkbox label to enable PPP encryption for a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_mppe">PPP encryption (MPPE)</string>
    <!-- Input label for the L2TP secret of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_l2tp_secret">L2TP secret</string>
    <!-- Input label for the IPSec identifier of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_ipsec_identifier">IPSec identifier</string>
    <!-- Input label for the IPSec pre-shared key of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_ipsec_secret">IPSec pre-shared key</string>
    <!-- Selection label for the IPSec user certificate of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_ipsec_user_cert">IPSec user certificate</string>
    <!-- Selection label for the IPSec CA certificate of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_ipsec_ca_cert">IPSec CA certificate</string>
    <!-- Checkbox label to show advanced options of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_show_options">Show advanced options</string>
    <!-- Input label for the DNS search domains of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_search_domains">DNS search domains</string>
    <!-- Input label for the DNS servers of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_dns_servers">DNS servers (e.g. 8.8.8.8)</string>
    <!-- Input label for the forwarding routes of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_routes">Forwarding routes (e.g. 10.0.0.0/8)</string>
    <!-- Input label for the username of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_username">Username</string>
    <!-- Input label for the password of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_password">Password</string>
    <!-- Checkbox label to save the username and the password for a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_save_login">Save account information</string>
    <!-- Hint for not using an optional feature of a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_not_used">(not used)</string>
    <!-- Option to not use a CA certificate to verify the VPN server. [CHAR LIMIT=40] -->
    <string name="vpn_no_ca_cert">(don\'t verify server)</string>

    <!-- Button label to cancel chaning a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_cancel">Cancel</string>
    <!-- Button label to save a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_save">Save</string>
    <!-- Button label to connect to a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_connect">Connect</string>
    <!-- Dialog title to edit a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_edit">Edit VPN network</string>
    <!-- Dialog title to connect to a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_connect_to">Connect to <xliff:g id="network" example="School">%s</xliff:g></string>

    <!-- Preference title for VPN settings. [CHAR LIMIT=40] -->
    <string name="vpn_title">VPN</string>
    <!-- Preference title to create a new VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_create">Add VPN network</string>
    <!-- Menu item to edit a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_menu_edit">Edit network</string>
    <!-- Menu item to delete a VPN network. [CHAR LIMIT=40] -->
    <string name="vpn_menu_delete">Delete network</string>

    <!-- Tab label for built-in system CA certificates. -->
    <string name="trusted_credentials_system_tab">System</string>
    <!-- Tab label for user added CA certificates. -->
    <string name="trusted_credentials_user_tab">User</string>
    <!-- Button label for disabling a system CA certificate. -->
    <string name="trusted_credentials_disable_label">Disable</string>
    <!-- Button label for enabling a system CA certificate. -->
    <string name="trusted_credentials_enable_label">Enable</string>
    <!-- Button label for removing a user CA certificate. -->
    <string name="trusted_credentials_remove_label">Remove</string>
    <!-- Alert dialog confirmation when enabling a system CA certificate. -->
    <string name="trusted_credentials_enable_confirmation">Enable the system CA certificate?</string>
    <!-- Alert dialog confirmation when disabling a system CA certificate. -->
    <string name="trusted_credentials_disable_confirmation">Disable the system CA certificate?</string>
    <!-- Alert dialog confirmation when removing a user CA certificate. -->
    <string name="trusted_credentials_remove_confirmation">Permanently remove the user CA certificate?</string>

    <!-- Title for the touch exploration tutorial. [CHAR LIMIT=40] -->
    <string name="accessibility_tutorial_title">Accessibility tutorial</string>
    <!-- Button label to go to the next touch exploration tutorial lesson. [CHAR LIMIT=10] -->
    <string name="accessibility_tutorial_next">Next</string>
    <!-- Button label to go back to the previous touch explorationtutorial lesson. [CHAR LIMIT=10] -->
    <string name="accessibility_tutorial_back">Back</string>
    <!-- Button label to exit the touch explorationtutorial. [CHAR LIMIT=10] -->
    <string name="accessibility_tutorial_finish">Finish</string>
    <!-- Button label to skip the touch exploration tutorial. [CHAR LIMIT=10] -->
    <string name="accessibility_tutorial_skip">Skip tutorial</string>

    <!-- Title for touch exploration tutorial lesson 1. -->
    <string name="accessibility_tutorial_lesson_1_title">Lesson 1: Exploring the screen</string>
    <!-- Instruction for touch exploration tutorial lesson 1. "Explore by touch" should match the string for "Title for accessibility preference to enable touch exploration mode." -->
    <string name="accessibility_tutorial_lesson_1_text_1">After you turn on Explore by Touch, you can touch the screen to learn what\’s under your finger. For example, the current screen contains app icons. Find one of them by touching the screen and sliding your finger around.</string>
    <!-- Instruction for touch exploration tutorial lesson 1, displayed after the user touches one icon. -->
    <string name="accessibility_tutorial_lesson_1_text_2_more">Good. Keep sliding your finger around the screen until you find at least one more icon.</string>
    <!-- Instruction for touch exploration tutorial lesson 1, displayed after the user touches a second icon. -->
    <string name="accessibility_tutorial_lesson_1_text_3">To activate something that you\’re touching, tap it. Slide your finger until you find the icon for the <xliff:g id="app_name" example="Browser">%s</xliff:g>. Then tap the icon once to activate it.</string>
    <!-- Instruction for touch exploration tutorial lesson 1, displayed if the user touched the target area and stays inside it. -->
    <string name="accessibility_tutorial_lesson_1_text_4">Your finger is touching the <xliff:g id="app_name" example="Browser">%s</xliff:g> icon. Tap once to activate the icon.</string>
    <!-- Instruction for touch exploration tutorial lesson 1, displayed if the user touches inside the target area but moves outside. -->
    <string name="accessibility_tutorial_lesson_1_text_4_exited">Your finger moved over the <xliff:g id="app_name" example="Browser">%s</xliff:g> icon, and then moved away. Slowly slide your finger around the screen until you find the Browser icon again.</string>
    <!-- Instruction for touch exploration tutorial lesson 1, displayed after the user has tapped the target icon. -->
    <string name="accessibility_tutorial_lesson_1_text_5">Good. To move to the next lesson, find and activate the <xliff:g id="next" example="Next">%s</xliff:g> button, located near the bottom-right corner of the screen.</string>

    <!-- Title for touch exploration tutorial lesson 2. -->
    <string name="accessibility_tutorial_lesson_2_title">Lesson 2: Scrolling using two fingers</string>
    <!-- Instruction for touch exploration tutorial lesson 2. -->
    <string name="accessibility_tutorial_lesson_2_text_1">To scroll through a list, you can slide two fingers along the screen. For example, the current screen contains a list of app names that can scroll up or down. First, try to identify a few items in the list by sliding one finger around.</string>
    <!-- Instruction for touch exploration tutorial lesson 2, displayed after the user touches one list item. -->
    <string name="accessibility_tutorial_lesson_2_text_2_more">Good. Keep sliding your finger around to find at least one more item.</string>
    <!-- Instruction for touch exploration tutorial lesson 2, displayed after the user touches a second list item. -->
    <string name="accessibility_tutorial_lesson_2_text_3">Now place two fingers on an item in the list and slide both fingers up. If you reach the top of the screen, lift your fingers, place them lower on the list, and continue sliding up.</string>
    <!-- Instruction for touch exploration tutorial lesson 2, displayed after the user scrolls a small amount. -->
    <string name="accessibility_tutorial_lesson_2_text_3_more">Good. Keep sliding your fingers up to scroll some more.</string>
    <!-- Instruction for touch exploration tutorial lesson 2, displayed after the user has scrolled a large amount. -->
    <string name="accessibility_tutorial_lesson_2_text_4">You have completed the tutorial. To exit, find and touch the <xliff:g id="finish" example="Finish">%s</xliff:g> button.</string>

    <!--  Title for spelling correction settings -->
    <string name="spellcheckers_settings_title">Spelling correction</string>

    <!-- Prompt for the user to enter their current full-backup password -->
    <string name="current_backup_pw_prompt">Type your current full backup password here</string>
    <!-- Prompt for the user to enter a new full-backup password -->
    <string name="new_backup_pw_prompt">Type a new password for full backups here</string>
    <!-- Prompt for the user to confirm the new full-backup password by re-entering it -->
    <string name="confirm_new_backup_pw_prompt">Retype your new full backup password here</string>

    <!-- Button label for setting the user's new full-backup password -->
    <string name="backup_pw_set_button_text">Set backup password</string>
    <!-- Button label for cancelling the new-password operation and retaining the user's previous full-backup password -->
    <string name="backup_pw_cancel_button_text">Cancel</string>

    <!-- Representation of a numerical percentage. [CHAR LIMIT=8] -->
    <string name="percentage"><xliff:g id="number" example="30">%d</xliff:g>%%</string>

</resources>

登录后可以享受更多权益