/*
* Copyright (C) 2006 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef SkRect_DEFINED
#define SkRect_DEFINED
#include "SkPoint.h"
#include "SkSize.h"
/** \struct SkIRect
SkIRect holds four 32 bit integer coordinates for a rectangle
*/
struct SK_API SkIRect {
int32_t fLeft, fTop, fRight, fBottom;
static SkIRect MakeEmpty() {
SkIRect r;
r.setEmpty();
return r;
}
static SkIRect MakeWH(int32_t w, int32_t h) {
SkIRect r;
r.set(0, 0, w, h);
return r;
}
static SkIRect MakeSize(const SkISize& size) {
SkIRect r;
r.set(0, 0, size.width(), size.height());
return r;
}
static SkIRect MakeLTRB(int32_t l, int32_t t, int32_t r, int32_t b) {
SkIRect rect;
rect.set(l, t, r, b);
return rect;
}
static SkIRect MakeXYWH(int32_t x, int32_t y, int32_t w, int32_t h) {
SkIRect r;
r.set(x, y, x + w, y + h);
return r;
}
/** Return true if the rectangle's width or height are <= 0
*/
bool isEmpty() const { return fLeft >= fRight || fTop >= fBottom; }
/** Returns the rectangle's width. This does not check for a valid rectangle (i.e. left <= right)
so the result may be negative.
*/
int width() const { return fRight - fLeft; }
/** Returns the rectangle's height. This does not check for a valid rectangle (i.e. top <= bottom)
so the result may be negative.
*/
int height() const { return fBottom - fTop; }
friend int operator==(const SkIRect& a, const SkIRect& b) {
return !memcmp(&a, &b, sizeof(a));
}
friend int operator!=(const SkIRect& a, const SkIRect& b) {
return memcmp(&a, &b, sizeof(a));
}
bool is16Bit() const {
return SkIsS16(fLeft) && SkIsS16(fTop) &&
SkIsS16(fRight) && SkIsS16(fBottom);
}
/** Set the rectangle to (0,0,0,0)
*/
void setEmpty() { memset(this, 0, sizeof(*this)); }
void set(int32_t left, int32_t top, int32_t right, int32_t bottom) {
fLeft = left;
fTop = top;
fRight = right;
fBottom = bottom;
}
// alias for set(l, t, r, b)
void setLTRB(int32_t left, int32_t top, int32_t right, int32_t bottom) {
this->set(left, top, right, bottom);
}
void setXYWH(int32_t x, int32_t y, int32_t width, int32_t height) {
fLeft = x;
fTop = y;
fRight = x + width;
fBottom = y + height;
}
/**
* Make the largest representable rectangle
*/
void setLargest() {
fLeft = fTop = SK_MinS32;
fRight = fBottom = SK_MaxS32;
}
/**
* Make the largest representable rectangle, but inverted (e.g. fLeft will
* be max 32bit and right will be min 32bit).
*/
void setLargestInverted() {
fLeft = fTop = SK_MaxS32;
fRight = fBottom = SK_MinS32;
}
/** Offset set the rectangle by adding dx to its left and right,
and adding dy to its top and bottom.
*/
void offset(int32_t dx, int32_t dy) {
fLeft += dx;
fTop += dy;
fRight += dx;
fBottom += dy;
}
void offset(const SkIPoint& delta) {
this->offset(delta.fX, delta.fY);
}
/** Inset the rectangle by (dx,dy). If dx is positive, then the sides are moved inwards,
making the rectangle narrower. If dx is negative, then the sides are moved outwards,
making the rectangle wider. The same hods true for dy and the top and bottom.
*/
void inset(int32_t dx, int32_t dy) {
fLeft += dx;
fTop += dy;
fRight -= dx;
fBottom -= dy;
}
bool quickReject(int l, int t, int r, int b) const {
return l >= fRight || fLeft >= r || t >= fBottom || fTop >= b;
}
/** Returns true if (x,y) is inside the rectangle and the rectangle is not
empty. The left and top are considered to be inside, while the right
and bottom are not. Thus for the rectangle (0, 0, 5, 10), the
points (0,0) and (0,9) are inside, while (-1,0) and (5,9) are not.
*/
bool contains(int32_t x, int32_t y) const {
return (unsigned)(x - fLeft) < (unsigned)(fRight - fLeft) &&
(unsigned)(y - fTop) < (unsigned)(fBottom - fTop);
}
/** Returns true if the 4 specified sides of a rectangle are inside or equal to this rectangle.
If either rectangle is empty, contains() returns false.
*/
bool contains(int32_t left, int32_t top, int32_t right, int32_t bottom) const {
return left < right && top < bottom && !this->isEmpty() && // check for empties
fLeft <= left && fTop <= top &&
fRight >= right && fBottom >= bottom;
}
/** Returns true if the specified rectangle r is inside or equal to this rectangle.
*/
bool contains(const SkIRect& r) const {
return !r.isEmpty() && !this->isEmpty() && // check for empties
fLeft <= r.fLeft && fTop <= r.fTop &&
fRight >= r.fRight && fBottom >= r.fBottom;
}
/** Return true if this rectangle contains the specified rectangle.
For speed, this method does not check if either this or the specified
rectangles are empty, and if either is, its return value is undefined.
In the debugging build however, we assert that both this and the
specified rectangles are non-empty.
*/
bool containsNoEmptyCheck(int32_t left, int32_t top,
int32_t right, int32_t bottom) const {
SkASSERT(fLeft < fRight && fTop < fBottom);
SkASSERT(left < right && top < bottom);
return fLeft <= left && fTop <= top &&
fRight >= right && fBottom >= bottom;
}
/** If r intersects this rectangle, return true and set this rectangle to that
intersection, otherwise return false and do not change this rectangle.
If either rectangle is empty, do nothing and return false.
*/
bool intersect(const SkIRect& r) {
SkASSERT(&r);
return this->intersect(r.fLeft, r.fTop, r.fRight, r.fBottom);
}
/** If rectangles a and b intersect, return true and set this rectangle to
that intersection, otherwise return false and do not change this
rectangle. If either rectangle is empty, do nothing and return false.
*/
bool intersect(const SkIRect& a, const SkIRect& b) {
SkASSERT(&a && &b);
if (!a.isEmpty() && !b.isEmpty() &&
a.fLeft < b.fRight && b.fLeft < a.fRight &&
a.fTop < b.fBottom && b.fTop < a.fBottom) {
fLeft = SkMax32(a.fLeft, b.fLeft);
fTop = SkMax32(a.fTop, b.fTop);
fRight = SkMin32(a.fRight, b.fRight);
fBottom = SkMin32(a.fBottom, b.fBottom);
return true;
}
return false;
}
/** If rectangles a and b intersect, return true and set this rectangle to
that intersection, otherwise return false and do not change this
rectangle. For speed, no check to see if a or b are empty is performed.
If either is, then the return result is undefined. In the debug build,
we assert that both rectangles are non-empty.
*/
bool intersectNoEmptyCheck(const SkIRect& a, const SkIRect& b) {
SkASSERT(&a && &b);
SkASSERT(!a.isEmpty() && !b.isEmpty());
if (a.fLeft < b.fRight && b.fLeft < a.fRight &&
a.fTop < b.fBottom && b.fTop < a.fBottom) {
fLeft = SkMax32(a.fLeft, b.fLeft);
fTop = SkMax32(a.fTop, b.fTop);
fRight = SkMin32(a.fRight, b.fRight);
fBottom = SkMin32(a.fBottom, b.fBottom);
return true;
}
return false;
}
/** If the rectangle specified by left,top,right,bottom intersects this rectangle,
return true and set this rectangle to that intersection,
otherwise return false and do not change this rectangle.
If either rectangle is empty, do nothing and return false.
*/
bool intersect(int32_t left, int32_t top, int32_t right, int32_t bottom) {
if (left < right && top < bottom && !this->isEmpty() &&
fLeft < right && left < fRight && fTop < bottom && top < fBottom) {
if (fLeft < left) fLeft = left;
if (fTop < top) fTop = top;
if (fRight > right) fRight = right;
if (fBottom > bottom) fBottom = bottom;
return true;
}
return false;
}
/** Returns true if a and b are not empty, and they intersect
*/
static bool Intersects(const SkIRect& a, const SkIRect& b) {
return !a.isEmpty() && !b.isEmpty() && // check for empties
a.fLeft < b.fRight && b.fLeft < a.fRight &&
a.fTop < b.fBottom && b.fTop < a.fBottom;
}
/** Update this rectangle to enclose itself and the specified rectangle.
If this rectangle is empty, just set it to the specified rectangle. If the specified
rectangle is empty, do nothing.
*/
void join(int32_t left, int32_t top, int32_t right, int32_t bottom);
/** Update this rectangle to enclose itself and the specified rectangle.
If this rectangle is empty, just set it to the specified rectangle. If the specified
rectangle is empty, do nothing.
*/
void join(const SkIRect& r) {
this->join(r.fLeft, r.fTop, r.fRight, r.fBottom);
}
/** Swap top/bottom or left/right if there are flipped.
This can be called if the edges are computed separately,
and may have crossed over each other.
When this returns, left <= right && top <= bottom
*/
void sort();
static const SkIRect& EmptyIRect() {
static const SkIRect gEmpty = { 0, 0, 0, 0 };
return gEmpty;
}
};
/** \struct SkRect
*/
struct SK_API SkRect {
SkScalar fLeft, fTop, fRight, fBottom;
static SkRect MakeEmpty() {
SkRect r;
r.setEmpty();
return r;
}
static SkRect MakeWH(SkScalar w, SkScalar h) {
SkRect r;
r.set(0, 0, w, h);
return r;
}
static SkRect MakeSize(const SkSize& size) {
SkRect r;
r.set(0, 0, size.width(), size.height());
return r;
}
static SkRect MakeLTRB(SkScalar l, SkScalar t, SkScalar r, SkScalar b) {
SkRect rect;
rect.set(l, t, r, b);
return rect;
}
static SkRect MakeXYWH(SkScalar x, SkScalar y, SkScalar w, SkScalar h) {
SkRect r;
r.set(x, y, x + w, y + h);
return r;
}
/** Return true if the rectangle's width or height are <= 0
*/
bool isEmpty() const { return fLeft >= fRight || fTop >= fBottom; }
bool hasValidCoordinates() const;
SkScalar left() const { return fLeft; }
SkScalar top() const { return fTop; }
SkScalar right() const { return fRight; }
SkScalar bottom() const { return fBottom; }
SkScalar width() const { return fRight - fLeft; }
SkScalar height() const { return fBottom - fTop; }
SkScalar centerX() const { return SkScalarHalf(fLeft + fRight); }
SkScalar centerY() const { return SkScalarHalf(fTop + fBottom); }
friend int operator==(const SkRect& a, const SkRect& b) {
return !memcmp(&a, &b, sizeof(a));
}
friend int operator!=(const SkRect& a, const SkRect& b) {
return memcmp(&a, &b, sizeof(a));
}
/** return the 4 points that enclose the rectangle
*/
void toQuad(SkPoint quad[4]) const;
/** Set this rectangle to the empty rectangle (0,0,0,0)
*/
void setEmpty() { memset(this, 0, sizeof(*this)); }
void set(const SkIRect& src) {
fLeft = SkIntToScalar(src.fLeft);
fTop = SkIntToScalar(src.fTop);
fRight = SkIntToScalar(src.fRight);
fBottom = SkIntToScalar(src.fBottom);
}
void set(SkScalar left, SkScalar top, SkScalar right, SkScalar bottom) {
fLeft = left;
fTop = top;
fRight = right;
fBottom = bottom;
}
// alias for set(l, t, r, b)
void setLTRB(SkScalar left, SkScalar top, SkScalar right, SkScalar bottom) {
this->set(left, top, right, bottom);
}
/** Initialize the rect with the 4 specified integers. The routine handles
converting them to scalars (by calling SkIntToScalar)
*/
void iset(int left, int top, int right, int bottom) {
fLeft = SkIntToScalar(left);
fTop = SkIntToScalar(top);
fRight = SkIntToScalar(right);
fBottom = SkIntToScalar(bottom);
}
/** Set this rectangle to be the bounds of the array of points.
If the array is empty (count == 0), then set this rectangle
to the empty rectangle (0,0,0,0)
*/
void set(const SkPoint pts[], int count);
// alias for set(pts, count)
void setBounds(const SkPoint pts[], int count) {
this->set(pts, count);
}
void setXYWH(SkScalar x, SkScalar y, SkScalar width, SkScalar height) {
fLeft = x;
fTop = y;
fRight = x + width;
fBottom = y + height;
}
/**
* Make the largest representable rectangle
*/
void setLargest() {
fLeft = fTop = SK_ScalarMin;
fRight = fBottom = SK_ScalarMax;
}
/**
* Make the largest representable rectangle, but inverted (e.g. fLeft will
* be max and right will be min).
*/
void setLargestInverted() {
fLeft = fTop = SK_ScalarMax;
fRight = fBottom = SK_ScalarMin;
}
/** Offset set the rectangle by adding dx to its left and right,
and adding dy to its top and bottom.
*/
void offset(SkScalar dx, SkScalar dy) {
fLeft += dx;
fTop += dy;
fRight += dx;
fBottom += dy;
}
void offset(const SkPoint& delta) {
this->offset(delta.fX, delta.fY);
}
/** Inset the rectangle by (dx,dy). If dx is positive, then the sides are moved inwards,
making the rectangle narrower. If dx is negative, then the sides are moved outwards,
making the rectangle wider. The same hods true for dy and the top and bottom.
*/
void inset(SkScalar dx, SkScalar dy) {
fLeft += dx;
fTop += dy;
fRight -= dx;
fBottom -= dy;
}
/** If this rectangle intersects r, return true and set this rectangle to that
intersection, otherwise return false and do not change this rectangle.
If either rectangle is empty, do nothing and return false.
*/
bool intersect(const SkRect& r);
/** If this rectangle intersects the rectangle specified by left, top, right, bottom,
return true and set this rectangle to that intersection, otherwise return false
and do not change this rectangle.
If either rectangle is empty, do nothing and return false.
*/
bool intersect(SkScalar left, SkScalar top, SkScalar right, SkScalar bottom);
/**
* Return true if this rectangle is not empty, and the specified sides of
* a rectangle are not empty, and they intersect.
*/
bool intersects(SkScalar left, SkScalar top, SkScalar right, SkScalar bottom) const {
return // first check that both are not empty
left < right && top < bottom &&
fLeft < fRight && fTop < fBottom &&
// now check for intersection
fLeft < right && left < fRight &&
fTop < bottom && top < fBottom;
}
/**
* Return true if rectangles a and b are not empty and intersect.
*/
static bool Intersects(const SkRect& a, const SkRect& b) {
return !a.isEmpty() && !b.isEmpty() &&
a.fLeft < b.fRight && b.fLeft < a.fRight &&
a.fTop < b.fBottom && b.fTop < a.fBottom;
}
/**
* Update this rectangle to enclose itself and the specified rectangle.
* If this rectangle is empty, just set it to the specified rectangle.
* If the specified rectangle is empty, do nothing.
*/
void join(SkScalar left, SkScalar top, SkScalar right, SkScalar bottom);
/** Update this rectangle to enclose itself and the specified rectangle.
If this rectangle is empty, just set it to the specified rectangle. If the specified
rectangle is empty, do nothing.
*/
void join(const SkRect& r) {
this->join(r.fLeft, r.fTop, r.fRight, r.fBottom);
}
// alias for join()
void growToInclude(const SkRect& r) { this->join(r); }
/**
* Grow the rect to include the specified (x,y). After this call, the
* following will be true: fLeft <= x <= fRight && fTop <= y <= fBottom.
*
* This is close, but not quite the same contract as contains(), since
* contains() treats the left and top different from the right and bottom.
* contains(x,y) -> fLeft <= x < fRight && fTop <= y < fBottom. Also note
* that contains(x,y) always returns false if the rect is empty.
*/
void growToInclude(SkScalar x, SkScalar y) {
fLeft = SkMinScalar(x, fLeft);
fRight = SkMaxScalar(x, fRight);
fTop = SkMinScalar(y, fTop);
fBottom = SkMaxScalar(y, fBottom);
}
/**
* Returns true if (p.fX,p.fY) is inside the rectangle, and the rectangle
* is not empty.
*
* Contains treats the left and top differently from the right and bottom.
* The left and top coordinates of the rectangle are themselves considered
* to be inside, while the right and bottom are not. Thus for the rectangle
* {0, 0, 5, 10}, (0,0) is contained, but (0,10), (5,0) and (5,10) are not.
*/
bool contains(const SkPoint& p) const {
return !this->isEmpty() &&
fLeft <= p.fX && p.fX < fRight && fTop <= p.fY && p.fY < fBottom;
}
/**
* Returns true if (x,y) is inside the rectangle, and the rectangle
* is not empty.
*
* Contains treats the left and top differently from the right and bottom.
* The left and top coordinates of the rectangle are themselves considered
* to be inside, while the right and bottom are not. Thus for the rectangle
* {0, 0, 5, 10}, (0,0) is contained, but (0,10), (5,0) and (5,10) are not.
*/
bool contains(SkScalar x, SkScalar y) const {
return !this->isEmpty() &&
fLeft <= x && x < fRight && fTop <= y && y < fBottom;
}
/**
* Return true if this rectangle contains r, and if both rectangles are
* not empty.
*/
bool contains(const SkRect& r) const {
return !r.isEmpty() && !this->isEmpty() &&
fLeft <= r.fLeft && fTop <= r.fTop &&
fRight >= r.fRight && fBottom >= r.fBottom;
}
/**
* Set the dst rectangle by rounding this rectangle's coordinates to their
* nearest integer values using SkScalarRound.
*/
void round(SkIRect* dst) const {
SkASSERT(dst);
dst->set(SkScalarRound(fLeft), SkScalarRound(fTop),
SkScalarRound(fRight), SkScalarRound(fBottom));
}
/**
* Set the dst rectangle by rounding "out" this rectangle, choosing the
* SkScalarFloor of top and left, and the SkScalarCeil of right and bottom.
*/
void roundOut(SkIRect* dst) const {
SkASSERT(dst);
dst->set(SkScalarFloor(fLeft), SkScalarFloor(fTop),
SkScalarCeil(fRight), SkScalarCeil(fBottom));
}
/**
* Swap top/bottom or left/right if there are flipped (i.e. if width()
* or height() would have returned a negative value.) This should be called
* if the edges are computed separately, and may have crossed over each
* other. When this returns, left <= right && top <= bottom
*/
void sort();
};
#endif