/* config.h.in. Generated from configure.ac by autoheader. */ /* On Unix-like systems config.h.in is converted by "configure" into config.h. Some other environments also support the use of "configure". PCRE is written in Standard C, but there are a few non-standard things it can cope with, allowing it to run on SunOS4 and other "close to standard" systems. If you are going to build PCRE "by hand" on a system without "configure" you should copy the distributed config.h.generic to config.h, and then set up the macro definitions the way you need them. You must then add -DHAVE_CONFIG_H to all of your compile commands, so that config.h is included at the start of every source. Alternatively, you can avoid editing by using -D on the compiler command line to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H. PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set them both to 0; an emulation function will be used. */ /* By default, the \R escape sequence matches any Unicode line ending character or sequence of characters. If BSR_ANYCRLF is defined, this is changed so that backslash-R matches only CR, LF, or CRLF. The build- time default can be overridden by the user of PCRE at runtime. On systems that support it, "configure" can be used to override the default. */ #undef BSR_ANYCRLF /* If you are compiling for a system that uses EBCDIC instead of ASCII character codes, define this macro as 1. On systems that can use "configure", this can be done via --enable-ebcdic. PCRE will then assume that all input strings are in EBCDIC. If you do not define this macro, PCRE will assume input strings are ASCII or UTF-8 Unicode. It is not possible to build a version of PCRE that supports both EBCDIC and UTF-8. */ #undef EBCDIC /* Define to 1 if you have the `bcopy' function. */ #undef HAVE_BCOPY /* Define to 1 if you have the <bits/type_traits.h> header file. */ #undef HAVE_BITS_TYPE_TRAITS_H /* Define to 1 if you have the <bzlib.h> header file. */ #undef HAVE_BZLIB_H /* Define to 1 if you have the <dirent.h> header file. */ #undef HAVE_DIRENT_H /* Define to 1 if you have the <dlfcn.h> header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the <inttypes.h> header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the <limits.h> header file. */ #undef HAVE_LIMITS_H /* Define to 1 if the system has the type `long long'. */ #undef HAVE_LONG_LONG /* Define to 1 if you have the `memmove' function. */ #undef HAVE_MEMMOVE /* Define to 1 if you have the <memory.h> header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the <readline/history.h> header file. */ #undef HAVE_READLINE_HISTORY_H /* Define to 1 if you have the <readline/readline.h> header file. */ #undef HAVE_READLINE_READLINE_H /* Define to 1 if you have the <stdint.h> header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the <stdlib.h> header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `strerror' function. */ #undef HAVE_STRERROR /* Define to 1 if you have the <string> header file. */ #undef HAVE_STRING /* Define to 1 if you have the <strings.h> header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the <string.h> header file. */ #undef HAVE_STRING_H /* Define to 1 if you have `strtoimax'. */ #undef HAVE_STRTOIMAX /* Define to 1 if you have `strtoll'. */ #undef HAVE_STRTOLL /* Define to 1 if you have `strtoq'. */ #undef HAVE_STRTOQ /* Define to 1 if you have the <sys/stat.h> header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the <sys/types.h> header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the <type_traits.h> header file. */ #undef HAVE_TYPE_TRAITS_H /* Define to 1 if you have the <unistd.h> header file. */ #undef HAVE_UNISTD_H /* Define to 1 if the system has the type `unsigned long long'. */ #undef HAVE_UNSIGNED_LONG_LONG /* Define to 1 if you have the <windows.h> header file. */ #undef HAVE_WINDOWS_H /* Define to 1 if you have the <zlib.h> header file. */ #undef HAVE_ZLIB_H /* Define to 1 if you have `_strtoi64'. */ #undef HAVE__STRTOI64 /* The value of LINK_SIZE determines the number of bytes used to store links as offsets within the compiled regex. The default is 2, which allows for compiled patterns up to 64K long. This covers the vast majority of cases. However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows for longer patterns in extreme cases. On systems that support it, "configure" can be used to override this default. */ #undef LINK_SIZE /* Define to the sub-directory in which libtool stores uninstalled libraries. */ #undef LT_OBJDIR /* The value of MATCH_LIMIT determines the default number of times the internal match() function can be called during a single execution of pcre_exec(). There is a runtime interface for setting a different limit. The limit exists in order to catch runaway regular expressions that take for ever to determine that they do not match. The default is set very large so that it does not accidentally catch legitimate cases. On systems that support it, "configure" can be used to override this default default. */ #undef MATCH_LIMIT /* The above limit applies to all calls of match(), whether or not they increase the recursion depth. In some environments it is desirable to limit the depth of recursive calls of match() more strictly, in order to restrict the maximum amount of stack (or heap, if NO_RECURSE is defined) that is used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of match(). To have any useful effect, it must be less than the value of MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is a runtime method for setting a different limit. On systems that support it, "configure" can be used to override the default. */ #undef MATCH_LIMIT_RECURSION /* This limit is parameterized just in case anybody ever wants to change it. Care must be taken if it is increased, because it guards against integer overflow caused by enormously large patterns. */ #undef MAX_NAME_COUNT /* This limit is parameterized just in case anybody ever wants to change it. Care must be taken if it is increased, because it guards against integer overflow caused by enormously large patterns. */ #undef MAX_NAME_SIZE /* The value of NEWLINE determines the newline character sequence. On systems that support it, "configure" can be used to override the default, which is 10. The possible values are 10 (LF), 13 (CR), 3338 (CRLF), -1 (ANY), or -2 (ANYCRLF). */ #undef NEWLINE /* PCRE uses recursive function calls to handle backtracking while matching. This can sometimes be a problem on systems that have stacks of limited size. Define NO_RECURSE to get a version that doesn't use recursion in the match() function; instead it creates its own stack by steam using pcre_recurse_malloc() to obtain memory from the heap. For more detail, see the comments and other stuff just above the match() function. On systems that support it, "configure" can be used to set this in the Makefile (use --disable-stack-for-recursion). */ #undef NO_RECURSE /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* If you are compiling for a system other than a Unix-like system or Win32, and it needs some magic to be inserted before the definition of a function that is exported by the library, define this macro to contain the relevant magic. If you do not define this macro, it defaults to "extern" for a C compiler and "extern C" for a C++ compiler on non-Win32 systems. This macro apears at the start of every exported function that is part of the external API. It does not appear on functions that are "external" in the C sense, but which are internal to the library. */ #undef PCRE_EXP_DEFN /* Define if linking statically (TODO: make nice with Libtool) */ #undef PCRE_STATIC /* When calling PCRE via the POSIX interface, additional working storage is required for holding the pointers to capturing substrings because PCRE requires three integers per substring, whereas the POSIX interface provides only two. If the number of expected substrings is small, the wrapper function uses space on the stack, because this is faster than using malloc() for each call. The threshold above which the stack is no longer used is defined by POSIX_MALLOC_THRESHOLD. On systems that support it, "configure" can be used to override this default. */ #undef POSIX_MALLOC_THRESHOLD /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define to allow pcregrep to be linked with libbz2, so that it is able to handle .bz2 files. */ #undef SUPPORT_LIBBZ2 /* Define to allow pcretest to be linked with libreadline. */ #undef SUPPORT_LIBREADLINE /* Define to allow pcregrep to be linked with libz, so that it is able to handle .gz files. */ #undef SUPPORT_LIBZ /* Define to enable support for Unicode properties */ #undef SUPPORT_UCP /* Define to enable support for the UTF-8 Unicode encoding. This will work even in an EBCDIC environment, but it is incompatible with the EBCDIC macro. That is, PCRE can support *either* EBCDIC code *or* ASCII/UTF-8, but not both at once. */ #undef SUPPORT_UTF8 /* Version number of package */ #undef VERSION /* Define to empty if `const' does not conform to ANSI C. */ #undef const /* Define to the type of a signed integer type of width exactly 64 bits if such a type exists and the standard includes do not define it. */ #undef int64_t /* Define to `unsigned int' if <sys/types.h> does not define. */ #undef size_t