#! /bin/sh

# Run PCRE tests.

valgrind=

# Set up a suitable "diff" command for comparison. Some systems
# have a diff that lacks a -u option. Try to deal with this.

if diff -u /dev/null /dev/null; then cf="diff -u"; else cf="diff"; fi

# Find the test data

testdata=testdata
if [ -n "$srcdir" -a -d "$srcdir" ] ; then
  testdata="$srcdir/testdata"
fi

# Find which optional facilities are available

case `./pcretest -C | ./pcregrep 'Internal link size'` in
  *2) link_size=2;;
  *3) link_size=3;;
  *4) link_size=4;;
   *) echo "Failed to find internal link size"; exit 1;;
esac

./pcretest -C | ./pcregrep 'No UTF-8 support' >/dev/null
utf8=$?

./pcretest -C | ./pcregrep 'No Unicode properties support' >/dev/null
ucp=$?

# Select which tests to run; for those that are explicitly requested, check
# that the necessary optional facilities are available.

do1=no
do2=no
do3=no
do4=no
do5=no
do6=no
do7=no
do8=no
do9=no
do10=no
do11=no
do12=no

while [ $# -gt 0 ] ; do
  case $1 in
    1) do1=yes;;
    2) do2=yes;;
    3) do3=yes;;
    4) do4=yes;;
    5) do5=yes;;
    6) do6=yes;;
    7) do7=yes;;
    8) do8=yes;;
    9) do9=yes;;
   10) do10=yes;;
   11) do11=yes;;
   12) do12=yes;;
   valgrind) valgrind="valgrind -q";;
    *) echo "Unknown test number $1"; exit 1;;
  esac
  shift
done

if [ $utf8 -eq 0 ] ; then
  if [ $do4 = yes ] ; then
    echo "Can't run test 4 because UTF-8 support is not configured"
    exit 1
  fi
  if [ $do5 = yes ] ; then
    echo "Can't run test 5 because UTF-8 support is not configured"
    exit 1
  fi
  if [ $do8 = yes ] ; then
    echo "Can't run test 8 because UTF-8 support is not configured"
    exit 1
  fi
fi

if [ $ucp -eq 0 ] ; then
  if [ $do6 = yes ] ; then
    echo "Can't run test 6 because Unicode property support is not configured"
    exit 1
  fi
  if [ $do9 = yes ] ; then
    echo "Can't run test 9 because Unicode property support is not configured"
    exit 1
  fi
  if [ $do10 = yes ] ; then
    echo "Can't run test 10 because Unicode property support is not configured"
    exit 1
  fi
  if [ $do12 = yes ] ; then
    echo "Can't run test 12 because Unicode property support is not configured"
    exit 1
  fi
fi

if [ $link_size -ne 2 ] ; then
  if [ $do10 = yes ] ; then
    echo "Can't run test 10 because the link size ($link_size) is not 2"
    exit 1
  fi
fi

# If no specific tests were requested, select all that are relevant.

if [ $do1 = no -a $do2 = no -a $do3 = no -a $do4 = no -a \
     $do5 = no -a $do6 = no -a $do7 = no -a $do8 = no -a \
     $do9 = no -a $do10 = no -a $do11 = no -a $do12 = no ] ; then
  do1=yes
  do2=yes
  do3=yes
  if [ $utf8 -ne 0 ] ; then do4=yes; fi
  if [ $utf8 -ne 0 ] ; then do5=yes; fi
  if [ $utf8 -ne 0 -a $ucp -ne 0 ] ; then do6=yes; fi
  do7=yes
  if [ $utf8 -ne 0 ] ; then do8=yes; fi
  if [ $utf8 -ne 0 -a $ucp -ne 0 ] ; then do9=yes; fi
  if [ $link_size -eq 2 -a $ucp -ne 0 ] ; then do10=yes; fi
  do11=yes
  if [ $utf8 -ne 0 -a $ucp -ne 0 ] ; then do12=yes; fi
fi

# Show which release

echo ""
echo PCRE C library tests
./pcretest /dev/null

# Primary test, compatible with all versions of Perl >= 5.8

if [ $do1 = yes ] ; then
  echo "Test 1: main functionality (Compatible with Perl >= 5.8)"
  $valgrind ./pcretest -q $testdata/testinput1 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput1 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

# PCRE tests that are not Perl-compatible - API, errors, internals

if [ $do2 = yes ] ; then
  echo "Test 2: API, errors, internals, and non-Perl stuff"
  $valgrind ./pcretest -q $testdata/testinput2 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput2 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else
    echo " "
    echo "** Test 2 requires a lot of stack. If it has crashed with a"
    echo "** segmentation fault, it may be that you do not have enough"
    echo "** stack available by default. Please see the 'pcrestack' man"
    echo "** page for a discussion of PCRE's stack usage."
    echo " "
    exit 1
  fi
  echo "OK"
fi

# Locale-specific tests, provided that either the "fr_FR" or the "french"
# locale is available. The former is the Unix-like standard; the latter is
# for Windows.

if [ $do3 = yes ] ; then
  locale -a | grep '^fr_FR$' >/dev/null
  if [ $? -eq 0 ] ; then
    locale=fr_FR
    infile=$testdata/testinput3
    outfile=$testdata/testoutput3
  else
    locale -a | grep '^french$' >/dev/null
    if [ $? -eq 0 ] ; then
      locale=french
      sed 's/fr_FR/french/' $testdata/testinput3 >test3input
      sed 's/fr_FR/french/' $testdata/testoutput3 >test3output
      infile=test3input
      outfile=test3output
    else
      locale=
    fi
  fi

  if [ "$locale" != "" ] ; then
    echo "Test 3: locale-specific features (using '$locale' locale)"
    $valgrind ./pcretest -q $infile testtry
    if [ $? = 0 ] ; then
      $cf $outfile testtry
      if [ $? != 0 ] ; then
        echo " "
        echo "Locale test did not run entirely successfully."
        echo "This usually means that there is a problem with the locale"
        echo "settings rather than a bug in PCRE."
      else
      echo "OK"
      fi
    else exit 1
    fi
  else
    echo "Cannot test locale-specific features - neither the 'fr_FR' nor the"
    echo "'french' locale exists, or the \"locale\" command is not available"
    echo "to check for them."
    echo " "
  fi
fi

# Additional tests for UTF8 support

if [ $do4 = yes ] ; then
  echo "Test 4: UTF-8 support (Compatible with Perl >= 5.8)"
  $valgrind ./pcretest -q $testdata/testinput4 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput4 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

if [ $do5 = yes ] ; then
  echo "Test 5: API, internals, and non-Perl stuff for UTF-8 support"
  $valgrind ./pcretest -q $testdata/testinput5 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput5 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

if [ $do6 = yes ] ; then
  echo "Test 6: Unicode property support (Compatible with Perl >= 5.10)"
  $valgrind ./pcretest -q $testdata/testinput6 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput6 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

# Tests for DFA matching support

if [ $do7 = yes ] ; then
  echo "Test 7: DFA matching"
  $valgrind ./pcretest -q -dfa $testdata/testinput7 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput7 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

if [ $do8 = yes ] ; then
  echo "Test 8: DFA matching with UTF-8"
  $valgrind ./pcretest -q -dfa $testdata/testinput8 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput8 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

if [ $do9 = yes ] ; then
  echo "Test 9: DFA matching with Unicode properties"
  $valgrind ./pcretest -q -dfa $testdata/testinput9 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput9 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

# Test of internal offsets and code sizes. This test is run only when there
# is Unicode property support and the link size is 2. The actual tests are
# mostly the same as in some of the above, but in this test we inspect some
# offsets and sizes that require a known link size. This is a doublecheck for
# the maintainer, just in case something changes unexpectely.

if [ $do10 = yes ] ; then
  echo "Test 10: Internal offsets and code size tests"
  $valgrind ./pcretest -q $testdata/testinput10 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput10 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

# Test of Perl >= 5.10 features

if [ $do11 = yes ] ; then
  echo "Test 11: Features from Perl >= 5.10"
  $valgrind ./pcretest -q $testdata/testinput11 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput11 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

# Test non-Perl-compatible Unicode property support

if [ $do12 = yes ] ; then
  echo "Test 12: API, internals, and non-Perl stuff for Unicode property support"
  $valgrind ./pcretest -q $testdata/testinput12 testtry
  if [ $? = 0 ] ; then
    $cf $testdata/testoutput12 testtry
    if [ $? != 0 ] ; then exit 1; fi
  else exit 1
  fi
  echo "OK"
fi

# End