/* crypto/bn/bn_div.c */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
* All rights reserved.
*
* This package is an SSL implementation written
* by Eric Young (eay@cryptsoft.com).
* The implementation was written so as to conform with Netscapes SSL.
*
* This library is free for commercial and non-commercial use as long as
* the following conditions are aheared to. The following conditions
* apply to all code found in this distribution, be it the RC4, RSA,
* lhash, DES, etc., code; not just the SSL code. The SSL documentation
* included with this distribution is covered by the same copyright terms
* except that the holder is Tim Hudson (tjh@cryptsoft.com).
*
* Copyright remains Eric Young's, and as such any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric Young should be given attribution
* as the author of the parts of the library used.
* This can be in the form of a textual message at program startup or
* in documentation (online or textual) provided with the package.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* "This product includes cryptographic software written by
* Eric Young (eay@cryptsoft.com)"
* The word 'cryptographic' can be left out if the rouines from the library
* being used are not cryptographic related :-).
* 4. If you include any Windows specific code (or a derivative thereof) from
* the apps directory (application code) you must include an acknowledgement:
* "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
*
* THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* The licence and distribution terms for any publically available version or
* derivative of this code cannot be changed. i.e. this code cannot simply be
* copied and put under another distribution licence
* [including the GNU Public Licence.]
*/
#include <stdio.h>
#include <openssl/bn.h>
#include "cryptlib.h"
#include "bn_lcl.h"
/* The old slow way */
#if 0
int BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d,
BN_CTX *ctx)
{
int i,nm,nd;
int ret = 0;
BIGNUM *D;
bn_check_top(m);
bn_check_top(d);
if (BN_is_zero(d))
{
BNerr(BN_F_BN_DIV,BN_R_DIV_BY_ZERO);
return(0);
}
if (BN_ucmp(m,d) < 0)
{
if (rem != NULL)
{ if (BN_copy(rem,m) == NULL) return(0); }
if (dv != NULL) BN_zero(dv);
return(1);
}
BN_CTX_start(ctx);
D = BN_CTX_get(ctx);
if (dv == NULL) dv = BN_CTX_get(ctx);
if (rem == NULL) rem = BN_CTX_get(ctx);
if (D == NULL || dv == NULL || rem == NULL)
goto end;
nd=BN_num_bits(d);
nm=BN_num_bits(m);
if (BN_copy(D,d) == NULL) goto end;
if (BN_copy(rem,m) == NULL) goto end;
/* The next 2 are needed so we can do a dv->d[0]|=1 later
* since BN_lshift1 will only work once there is a value :-) */
BN_zero(dv);
if(bn_wexpand(dv,1) == NULL) goto end;
dv->top=1;
if (!BN_lshift(D,D,nm-nd)) goto end;
for (i=nm-nd; i>=0; i--)
{
if (!BN_lshift1(dv,dv)) goto end;
if (BN_ucmp(rem,D) >= 0)
{
dv->d[0]|=1;
if (!BN_usub(rem,rem,D)) goto end;
}
/* CAN IMPROVE (and have now :=) */
if (!BN_rshift1(D,D)) goto end;
}
rem->neg=BN_is_zero(rem)?0:m->neg;
dv->neg=m->neg^d->neg;
ret = 1;
end:
BN_CTX_end(ctx);
return(ret);
}
#else
#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) \
&& !defined(PEDANTIC) && !defined(BN_DIV3W)
# if defined(__GNUC__) && __GNUC__>=2
# if defined(__i386) || defined (__i386__)
/*
* There were two reasons for implementing this template:
* - GNU C generates a call to a function (__udivdi3 to be exact)
* in reply to ((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0 (I fail to
* understand why...);
* - divl doesn't only calculate quotient, but also leaves
* remainder in %edx which we can definitely use here:-)
*
* <appro@fy.chalmers.se>
*/
# define bn_div_words(n0,n1,d0) \
({ asm volatile ( \
"divl %4" \
: "=a"(q), "=d"(rem) \
: "a"(n1), "d"(n0), "g"(d0) \
: "cc"); \
q; \
})
# define REMAINDER_IS_ALREADY_CALCULATED
# elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG)
/*
* Same story here, but it's 128-bit by 64-bit division. Wow!
* <appro@fy.chalmers.se>
*/
# define bn_div_words(n0,n1,d0) \
({ asm volatile ( \
"divq %4" \
: "=a"(q), "=d"(rem) \
: "a"(n1), "d"(n0), "g"(d0) \
: "cc"); \
q; \
})
# define REMAINDER_IS_ALREADY_CALCULATED
# endif /* __<cpu> */
# endif /* __GNUC__ */
#endif /* OPENSSL_NO_ASM */
/* BN_div[_no_branch] computes dv := num / divisor, rounding towards
* zero, and sets up rm such that dv*divisor + rm = num holds.
* Thus:
* dv->neg == num->neg ^ divisor->neg (unless the result is zero)
* rm->neg == num->neg (unless the remainder is zero)
* If 'dv' or 'rm' is NULL, the respective value is not returned.
*/
static int BN_div_no_branch(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num,
const BIGNUM *divisor, BN_CTX *ctx);
int BN_div(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, const BIGNUM *divisor,
BN_CTX *ctx)
{
int norm_shift,i,loop;
BIGNUM *tmp,wnum,*snum,*sdiv,*res;
BN_ULONG *resp,*wnump;
BN_ULONG d0,d1;
int num_n,div_n;
/* Invalid zero-padding would have particularly bad consequences
* in the case of 'num', so don't just rely on bn_check_top() for this one
* (bn_check_top() works only for BN_DEBUG builds) */
if (num->top > 0 && num->d[num->top - 1] == 0)
{
BNerr(BN_F_BN_DIV,BN_R_NOT_INITIALIZED);
return 0;
}
bn_check_top(num);
if ((BN_get_flags(num, BN_FLG_CONSTTIME) != 0) || (BN_get_flags(divisor, BN_FLG_CONSTTIME) != 0))
{
return BN_div_no_branch(dv, rm, num, divisor, ctx);
}
bn_check_top(dv);
bn_check_top(rm);
/* bn_check_top(num); */ /* 'num' has been checked already */
bn_check_top(divisor);
if (BN_is_zero(divisor))
{
BNerr(BN_F_BN_DIV,BN_R_DIV_BY_ZERO);
return(0);
}
if (BN_ucmp(num,divisor) < 0)
{
if (rm != NULL)
{ if (BN_copy(rm,num) == NULL) return(0); }
if (dv != NULL) BN_zero(dv);
return(1);
}
BN_CTX_start(ctx);
tmp=BN_CTX_get(ctx);
snum=BN_CTX_get(ctx);
sdiv=BN_CTX_get(ctx);
if (dv == NULL)
res=BN_CTX_get(ctx);
else res=dv;
if (sdiv == NULL || res == NULL || tmp == NULL || snum == NULL)
goto err;
/* First we normalise the numbers */
norm_shift=BN_BITS2-((BN_num_bits(divisor))%BN_BITS2);
if (!(BN_lshift(sdiv,divisor,norm_shift))) goto err;
sdiv->neg=0;
norm_shift+=BN_BITS2;
if (!(BN_lshift(snum,num,norm_shift))) goto err;
snum->neg=0;
div_n=sdiv->top;
num_n=snum->top;
loop=num_n-div_n;
/* Lets setup a 'window' into snum
* This is the part that corresponds to the current
* 'area' being divided */
wnum.neg = 0;
wnum.d = &(snum->d[loop]);
wnum.top = div_n;
/* only needed when BN_ucmp messes up the values between top and max */
wnum.dmax = snum->dmax - loop; /* so we don't step out of bounds */
/* Get the top 2 words of sdiv */
/* div_n=sdiv->top; */
d0=sdiv->d[div_n-1];
d1=(div_n == 1)?0:sdiv->d[div_n-2];
/* pointer to the 'top' of snum */
wnump= &(snum->d[num_n-1]);
/* Setup to 'res' */
res->neg= (num->neg^divisor->neg);
if (!bn_wexpand(res,(loop+1))) goto err;
res->top=loop;
resp= &(res->d[loop-1]);
/* space for temp */
if (!bn_wexpand(tmp,(div_n+1))) goto err;
if (BN_ucmp(&wnum,sdiv) >= 0)
{
/* If BN_DEBUG_RAND is defined BN_ucmp changes (via
* bn_pollute) the const bignum arguments =>
* clean the values between top and max again */
bn_clear_top2max(&wnum);
bn_sub_words(wnum.d, wnum.d, sdiv->d, div_n);
*resp=1;
}
else
res->top--;
/* if res->top == 0 then clear the neg value otherwise decrease
* the resp pointer */
if (res->top == 0)
res->neg = 0;
else
resp--;
for (i=0; i<loop-1; i++, wnump--, resp--)
{
BN_ULONG q,l0;
/* the first part of the loop uses the top two words of
* snum and sdiv to calculate a BN_ULONG q such that
* | wnum - sdiv * q | < sdiv */
#if defined(BN_DIV3W) && !defined(OPENSSL_NO_ASM)
BN_ULONG bn_div_3_words(BN_ULONG*,BN_ULONG,BN_ULONG);
q=bn_div_3_words(wnump,d1,d0);
#else
BN_ULONG n0,n1,rem=0;
n0=wnump[0];
n1=wnump[-1];
if (n0 == d0)
q=BN_MASK2;
else /* n0 < d0 */
{
#ifdef BN_LLONG
BN_ULLONG t2;
#if defined(BN_LLONG) && defined(BN_DIV2W) && !defined(bn_div_words)
q=(BN_ULONG)(((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0);
#else
q=bn_div_words(n0,n1,d0);
#ifdef BN_DEBUG_LEVITTE
fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
X) -> 0x%08X\n",
n0, n1, d0, q);
#endif
#endif
#ifndef REMAINDER_IS_ALREADY_CALCULATED
/*
* rem doesn't have to be BN_ULLONG. The least we
* know it's less that d0, isn't it?
*/
rem=(n1-q*d0)&BN_MASK2;
#endif
t2=(BN_ULLONG)d1*q;
for (;;)
{
if (t2 <= ((((BN_ULLONG)rem)<<BN_BITS2)|wnump[-2]))
break;
q--;
rem += d0;
if (rem < d0) break; /* don't let rem overflow */
t2 -= d1;
}
#else /* !BN_LLONG */
BN_ULONG t2l,t2h;
q=bn_div_words(n0,n1,d0);
#ifdef BN_DEBUG_LEVITTE
fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
X) -> 0x%08X\n",
n0, n1, d0, q);
#endif
#ifndef REMAINDER_IS_ALREADY_CALCULATED
rem=(n1-q*d0)&BN_MASK2;
#endif
#if defined(BN_UMULT_LOHI)
BN_UMULT_LOHI(t2l,t2h,d1,q);
#elif defined(BN_UMULT_HIGH)
t2l = d1 * q;
t2h = BN_UMULT_HIGH(d1,q);
#else
{
BN_ULONG ql, qh;
t2l=LBITS(d1); t2h=HBITS(d1);
ql =LBITS(q); qh =HBITS(q);
mul64(t2l,t2h,ql,qh); /* t2=(BN_ULLONG)d1*q; */
}
#endif
for (;;)
{
if ((t2h < rem) ||
((t2h == rem) && (t2l <= wnump[-2])))
break;
q--;
rem += d0;
if (rem < d0) break; /* don't let rem overflow */
if (t2l < d1) t2h--; t2l -= d1;
}
#endif /* !BN_LLONG */
}
#endif /* !BN_DIV3W */
l0=bn_mul_words(tmp->d,sdiv->d,div_n,q);
tmp->d[div_n]=l0;
wnum.d--;
/* ingore top values of the bignums just sub the two
* BN_ULONG arrays with bn_sub_words */
if (bn_sub_words(wnum.d, wnum.d, tmp->d, div_n+1))
{
/* Note: As we have considered only the leading
* two BN_ULONGs in the calculation of q, sdiv * q
* might be greater than wnum (but then (q-1) * sdiv
* is less or equal than wnum)
*/
q--;
if (bn_add_words(wnum.d, wnum.d, sdiv->d, div_n))
/* we can't have an overflow here (assuming
* that q != 0, but if q == 0 then tmp is
* zero anyway) */
(*wnump)++;
}
/* store part of the result */
*resp = q;
}
bn_correct_top(snum);
if (rm != NULL)
{
/* Keep a copy of the neg flag in num because if rm==num
* BN_rshift() will overwrite it.
*/
int neg = num->neg;
BN_rshift(rm,snum,norm_shift);
if (!BN_is_zero(rm))
rm->neg = neg;
bn_check_top(rm);
}
BN_CTX_end(ctx);
return(1);
err:
bn_check_top(rm);
BN_CTX_end(ctx);
return(0);
}
/* BN_div_no_branch is a special version of BN_div. It does not contain
* branches that may leak sensitive information.
*/
static int BN_div_no_branch(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num,
const BIGNUM *divisor, BN_CTX *ctx)
{
int norm_shift,i,loop;
BIGNUM *tmp,wnum,*snum,*sdiv,*res;
BN_ULONG *resp,*wnump;
BN_ULONG d0,d1;
int num_n,div_n;
bn_check_top(dv);
bn_check_top(rm);
/* bn_check_top(num); */ /* 'num' has been checked in BN_div() */
bn_check_top(divisor);
if (BN_is_zero(divisor))
{
BNerr(BN_F_BN_DIV_NO_BRANCH,BN_R_DIV_BY_ZERO);
return(0);
}
BN_CTX_start(ctx);
tmp=BN_CTX_get(ctx);
snum=BN_CTX_get(ctx);
sdiv=BN_CTX_get(ctx);
if (dv == NULL)
res=BN_CTX_get(ctx);
else res=dv;
if (sdiv == NULL || res == NULL) goto err;
/* First we normalise the numbers */
norm_shift=BN_BITS2-((BN_num_bits(divisor))%BN_BITS2);
if (!(BN_lshift(sdiv,divisor,norm_shift))) goto err;
sdiv->neg=0;
norm_shift+=BN_BITS2;
if (!(BN_lshift(snum,num,norm_shift))) goto err;
snum->neg=0;
/* Since we don't know whether snum is larger than sdiv,
* we pad snum with enough zeroes without changing its
* value.
*/
if (snum->top <= sdiv->top+1)
{
if (bn_wexpand(snum, sdiv->top + 2) == NULL) goto err;
for (i = snum->top; i < sdiv->top + 2; i++) snum->d[i] = 0;
snum->top = sdiv->top + 2;
}
else
{
if (bn_wexpand(snum, snum->top + 1) == NULL) goto err;
snum->d[snum->top] = 0;
snum->top ++;
}
div_n=sdiv->top;
num_n=snum->top;
loop=num_n-div_n;
/* Lets setup a 'window' into snum
* This is the part that corresponds to the current
* 'area' being divided */
wnum.neg = 0;
wnum.d = &(snum->d[loop]);
wnum.top = div_n;
/* only needed when BN_ucmp messes up the values between top and max */
wnum.dmax = snum->dmax - loop; /* so we don't step out of bounds */
/* Get the top 2 words of sdiv */
/* div_n=sdiv->top; */
d0=sdiv->d[div_n-1];
d1=(div_n == 1)?0:sdiv->d[div_n-2];
/* pointer to the 'top' of snum */
wnump= &(snum->d[num_n-1]);
/* Setup to 'res' */
res->neg= (num->neg^divisor->neg);
if (!bn_wexpand(res,(loop+1))) goto err;
res->top=loop-1;
resp= &(res->d[loop-1]);
/* space for temp */
if (!bn_wexpand(tmp,(div_n+1))) goto err;
/* if res->top == 0 then clear the neg value otherwise decrease
* the resp pointer */
if (res->top == 0)
res->neg = 0;
else
resp--;
for (i=0; i<loop-1; i++, wnump--, resp--)
{
BN_ULONG q,l0;
/* the first part of the loop uses the top two words of
* snum and sdiv to calculate a BN_ULONG q such that
* | wnum - sdiv * q | < sdiv */
#if defined(BN_DIV3W) && !defined(OPENSSL_NO_ASM)
BN_ULONG bn_div_3_words(BN_ULONG*,BN_ULONG,BN_ULONG);
q=bn_div_3_words(wnump,d1,d0);
#else
BN_ULONG n0,n1,rem=0;
n0=wnump[0];
n1=wnump[-1];
if (n0 == d0)
q=BN_MASK2;
else /* n0 < d0 */
{
#ifdef BN_LLONG
BN_ULLONG t2;
#if defined(BN_LLONG) && defined(BN_DIV2W) && !defined(bn_div_words)
q=(BN_ULONG)(((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0);
#else
q=bn_div_words(n0,n1,d0);
#ifdef BN_DEBUG_LEVITTE
fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
X) -> 0x%08X\n",
n0, n1, d0, q);
#endif
#endif
#ifndef REMAINDER_IS_ALREADY_CALCULATED
/*
* rem doesn't have to be BN_ULLONG. The least we
* know it's less that d0, isn't it?
*/
rem=(n1-q*d0)&BN_MASK2;
#endif
t2=(BN_ULLONG)d1*q;
for (;;)
{
if (t2 <= ((((BN_ULLONG)rem)<<BN_BITS2)|wnump[-2]))
break;
q--;
rem += d0;
if (rem < d0) break; /* don't let rem overflow */
t2 -= d1;
}
#else /* !BN_LLONG */
BN_ULONG t2l,t2h;
q=bn_div_words(n0,n1,d0);
#ifdef BN_DEBUG_LEVITTE
fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
X) -> 0x%08X\n",
n0, n1, d0, q);
#endif
#ifndef REMAINDER_IS_ALREADY_CALCULATED
rem=(n1-q*d0)&BN_MASK2;
#endif
#if defined(BN_UMULT_LOHI)
BN_UMULT_LOHI(t2l,t2h,d1,q);
#elif defined(BN_UMULT_HIGH)
t2l = d1 * q;
t2h = BN_UMULT_HIGH(d1,q);
#else
{
BN_ULONG ql, qh;
t2l=LBITS(d1); t2h=HBITS(d1);
ql =LBITS(q); qh =HBITS(q);
mul64(t2l,t2h,ql,qh); /* t2=(BN_ULLONG)d1*q; */
}
#endif
for (;;)
{
if ((t2h < rem) ||
((t2h == rem) && (t2l <= wnump[-2])))
break;
q--;
rem += d0;
if (rem < d0) break; /* don't let rem overflow */
if (t2l < d1) t2h--; t2l -= d1;
}
#endif /* !BN_LLONG */
}
#endif /* !BN_DIV3W */
l0=bn_mul_words(tmp->d,sdiv->d,div_n,q);
tmp->d[div_n]=l0;
wnum.d--;
/* ingore top values of the bignums just sub the two
* BN_ULONG arrays with bn_sub_words */
if (bn_sub_words(wnum.d, wnum.d, tmp->d, div_n+1))
{
/* Note: As we have considered only the leading
* two BN_ULONGs in the calculation of q, sdiv * q
* might be greater than wnum (but then (q-1) * sdiv
* is less or equal than wnum)
*/
q--;
if (bn_add_words(wnum.d, wnum.d, sdiv->d, div_n))
/* we can't have an overflow here (assuming
* that q != 0, but if q == 0 then tmp is
* zero anyway) */
(*wnump)++;
}
/* store part of the result */
*resp = q;
}
bn_correct_top(snum);
if (rm != NULL)
{
/* Keep a copy of the neg flag in num because if rm==num
* BN_rshift() will overwrite it.
*/
int neg = num->neg;
BN_rshift(rm,snum,norm_shift);
if (!BN_is_zero(rm))
rm->neg = neg;
bn_check_top(rm);
}
bn_correct_top(res);
BN_CTX_end(ctx);
return(1);
err:
bn_check_top(rm);
BN_CTX_end(ctx);
return(0);
}
#endif