# Makefile for PO directory in any package using GNU gettext.
# Copyright (C) 1995-1997, 2000-2002 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file can be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU General Public
# License but which still want to provide support for the GNU gettext
# functionality.
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.

PACKAGE = libelf
VERSION = @VERSION@

SHELL = /bin/sh
@SET_MAKE@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@

prefix = @prefix@
exec_prefix = @exec_prefix@
datadir = @datadir@
localedir = $(datadir)/locale
gettextsrcdir = $(datadir)/gettext/po
top_builddir = ..

INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
MKINSTALLDIRS = @MKINSTALLDIRS@
mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac`

GMSGFMT = @GMSGFMT@
MSGFMT = @MSGFMT@
XGETTEXT = @XGETTEXT@
MSGMERGE = msgmerge
MSGMERGE_UPDATE = @MSGMERGE@ --update
MSGINIT = msginit
MSGCONV = msgconv
MSGFILTER = msgfilter

POFILES = @POFILES@
GMOFILES = @GMOFILES@
UPDATEPOFILES = @UPDATEPOFILES@
DUMMYPOFILES = @DUMMYPOFILES@
DISTFILES.common = Makefile.in.in Makevars \
$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
DISTFILES = $(DISTFILES.common) POTFILES.in $(DOMAIN).pot \
$(POFILES) $(GMOFILES) \
$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)

POTFILES = \

CATALOGS = @CATALOGS@

# Makevars gets inserted here. (Don't remove this line!)

.SUFFIXES:
.SUFFIXES: .po .gmo .mo .nop .po-update

.po.mo:
	$(MSGFMT) -c -o $@ $<

.po.gmo:
	@lang=`echo $* | sed -e 's,.*/,,'`; \
	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po


all: all-@USE_NLS@

all-yes: $(CATALOGS)
all-no:

# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
# otherwise packages like GCC can not be built if only parts of the source
# have been downloaded.

$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in
	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
	  --files-from=$(srcdir)/POTFILES.in \
	  --copyright-holder='$(COPYRIGHT_HOLDER)' \
	&& test ! -f $(DOMAIN).po \
	   || ( rm -f $(srcdir)/$(DOMAIN).pot \
		&& mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot )

$(srcdir)/$(DOMAIN).pot:
	$(MAKE) $(DOMAIN).pot-update

$(POFILES): $(srcdir)/$(DOMAIN).pot
	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
	cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot


install: install-exec install-data
install-exec:
install-data: install-data-@USE_NLS@
	if test "$(PACKAGE)" = "gettext"; then \
	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
	  for file in $(DISTFILES.common); do \
	    $(INSTALL_DATA) $(srcdir)/$$file \
			    $(DESTDIR)$(gettextsrcdir)/$$file; \
	  done; \
	else \
	  : ; \
	fi
install-data-no: all
install-data-yes: all
	$(mkinstalldirs) $(DESTDIR)$(datadir)
	@catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	  cat=`basename $$cat`; \
	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
	  dir=$(localedir)/$$lang/LC_MESSAGES; \
	  $(mkinstalldirs) $(DESTDIR)$$dir; \
	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
	    if test -n "$$lc"; then \
	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
	         for file in *; do \
	           if test -f $$file; then \
	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
	           fi; \
	         done); \
	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	      else \
	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
	          :; \
	        else \
	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        fi; \
	      fi; \
	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
	    fi; \
	  done; \
	done

install-strip: install

installdirs: installdirs-exec installdirs-data
installdirs-exec:
installdirs-data: installdirs-data-@USE_NLS@
	if test "$(PACKAGE)" = "gettext"; then \
	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
	else \
	  : ; \
	fi
installdirs-data-no:
installdirs-data-yes:
	$(mkinstalldirs) $(DESTDIR)$(datadir)
	@catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	  cat=`basename $$cat`; \
	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
	  dir=$(localedir)/$$lang/LC_MESSAGES; \
	  $(mkinstalldirs) $(DESTDIR)$$dir; \
	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
	    if test -n "$$lc"; then \
	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
	         for file in *; do \
	           if test -f $$file; then \
	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
	           fi; \
	         done); \
	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	      else \
	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
	          :; \
	        else \
	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        fi; \
	      fi; \
	    fi; \
	  done; \
	done

# Define this as empty until I found a useful application.
installcheck:

uninstall: uninstall-exec uninstall-data
uninstall-exec:
uninstall-data: uninstall-data-@USE_NLS@
	if test "$(PACKAGE)" = "gettext"; then \
	  for file in $(DISTFILES.common); do \
	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
	  done; \
	else \
	  : ; \
	fi
uninstall-data-no:
uninstall-data-yes:
	catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	  cat=`basename $$cat`; \
	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	  done; \
	done

check: all

dvi info tags TAGS ID:

mostlyclean:
	rm -f core core.* $(DOMAIN).po *.new.po
	rm -fr *.o

clean: mostlyclean

distclean: clean
	rm -f Makefile Makefile.in POTFILES *.mo

maintainer-clean: distclean
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."
	rm -f $(GMOFILES)

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
dist distdir:
	$(MAKE) update-po
	@$(MAKE) dist2
# This is a separate target because 'update-po' must be executed before.
dist2: $(DISTFILES)
	dists="$(DISTFILES)"; \
	if test -f $(srcdir)/ChangeLog; then dists="$$dists ChangeLog"; fi; \
	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
	for file in $$dists; do \
	  if test -f $$file; then \
	    cp -p $$file $(distdir); \
	  else \
	    cp -p $(srcdir)/$$file $(distdir); \
	  fi; \
	done

update-po: Makefile
	$(MAKE) $(DOMAIN).pot-update
	$(MAKE) $(UPDATEPOFILES)
	$(MAKE) update-gmo

# General rule for updating PO files.

.nop.po-update:
	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
	if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \
	tmpdir=`pwd`; \
	echo "$$lang:"; \
	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
	cd $(srcdir); \
	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
	    rm -f $$tmpdir/$$lang.new.po; \
	  else \
	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
	      :; \
	    else \
	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
	      exit 1; \
	    fi; \
	  fi; \
	else \
	  echo "msgmerge for $$lang.po failed!" 1>&2; \
	  rm -f $$tmpdir/$$lang.new.po; \
	fi

$(DUMMYPOFILES):

update-gmo: Makefile $(GMOFILES)
	@:

Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
	       $(SHELL) ./config.status

force:

# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: