/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Dalvik interpreter definitions. These are internal to the interpreter.
*
* This includes defines, types, function declarations, and inline functions
* that are common to all interpreter implementations.
*
* Functions and globals declared here are defined in Interp.c.
*/
#ifndef _DALVIK_INTERP_DEFS
#define _DALVIK_INTERP_DEFS
/*
* Specify the starting point when switching between interpreters.
*/
typedef enum InterpEntry {
kInterpEntryInstr = 0, // continue to next instruction
kInterpEntryReturn = 1, // jump to method return
kInterpEntryThrow = 2, // jump to exception throw
#if defined(WITH_JIT)
kInterpEntryResume = 3, // Resume after single-step
#endif
} InterpEntry;
#if defined(WITH_JIT)
/*
* There are six entry points from the compiled code to the interpreter:
* 1) dvmJitToInterpNormal: find if there is a corresponding compilation for
* the new dalvik PC. If so, chain the originating compilation with the
* target then jump to it.
* 2) dvmJitToInterpInvokeNoChain: similar to 1) but don't chain. This is
* for handling 1-to-many mappings like virtual method call and
* packed switch.
* 3) dvmJitToInterpPunt: use the fast interpreter to execute the next
* instruction(s) and stay there as long as it is appropriate to return
* to the compiled land. This is used when the jit'ed code is about to
* throw an exception.
* 4) dvmJitToInterpSingleStep: use the portable interpreter to execute the
* next instruction only and return to pre-specified location in the
* compiled code to resume execution. This is mainly used as debugging
* feature to bypass problematic opcode implementations without
* disturbing the trace formation.
* 5) dvmJitToTraceSelect: if there is a single exit from a translation that
* has already gone hot enough to be translated, we should assume that
* the exit point should also be translated (this is a common case for
* invokes). This trace exit will first check for a chaining
* opportunity, and if none is available will switch to the debug
* interpreter immediately for trace selection (as if threshold had
* just been reached).
* 6) dvmJitToPredictedChain: patch the chaining cell for a virtual call site
* to a predicted callee.
* 7) dvmJitToBackwardBranch: (WITH_SELF_VERIFICATION ONLY) special case of 1)
* and 5). This is used instead if the ending branch of the trace jumps back
* into the same basic block.
*/
struct JitToInterpEntries {
void *dvmJitToInterpNormal;
void *dvmJitToInterpNoChain;
void *dvmJitToInterpPunt;
void *dvmJitToInterpSingleStep;
void *dvmJitToInterpTraceSelectNoChain;
void *dvmJitToInterpTraceSelect;
void *dvmJitToPatchPredictedChain;
#if defined(WITH_SELF_VERIFICATION)
void *dvmJitToInterpBackwardBranch;
#endif
};
/*
* Size of save area for callee-save FP regs, which are not automatically
* saved by interpreter main because it doesn't use them (but Jit'd code
* may). Save/restore routine is defined by target, and size should
* be >= max needed by any target.
*/
#define JIT_CALLEE_SAVE_DOUBLE_COUNT 8
/* Number of entries in the 2nd level JIT profiler filter cache */
#define JIT_TRACE_THRESH_FILTER_SIZE 32
/* Granularity of coverage (power of 2) by each cached entry */
#define JIT_TRACE_THRESH_FILTER_GRAN_LOG2 6
#endif
/*
* Interpreter context, used when switching from one interpreter to
* another. We also tuck "mterp" state in here.
*/
typedef struct InterpState {
/*
* To make some mterp state updates easier, "pc" and "fp" MUST come
* first and MUST appear in this order.
*/
const u2* pc; // program counter
u4* fp; // frame pointer
JValue retval; // return value -- "out" only
const Method* method; // method being executed
/* ----------------------------------------------------------------------
* Mterp-only state
*/
DvmDex* methodClassDex;
Thread* self;
/* housekeeping */
void* bailPtr;
/*
* These are available globally, from gDvm, or from another glue field
* (self/method). They're copied in here for speed.
*/
const u1* interpStackEnd;
volatile int* pSelfSuspendCount;
#if defined(WITH_DEBUGGER)
volatile u1* pDebuggerActive;
#endif
#if defined(WITH_PROFILER)
volatile int* pActiveProfilers;
#endif
/* ----------------------------------------------------------------------
*/
/*
* Interpreter switching.
*/
InterpEntry entryPoint; // what to do when we start
int nextMode; // INTERP_STD, INTERP_DBG
#if defined(WITH_JIT)
/*
* Local copies of field from gDvm placed here for fast access
*/
unsigned char* pJitProfTable;
JitState jitState;
const void* jitResumeNPC; // Native PC of compiled code
const u2* jitResumeDPC; // Dalvik PC corresponding to NPC
int jitThreshold;
/*
* ppJitProfTable holds the address of gDvmJit.pJitProfTable, which
* doubles as an on/off switch for the Jit. Because a change in
* the value of gDvmJit.pJitProfTable isn't reflected in the cached
* copy above (pJitProfTable), we need to periodically refresh it.
* ppJitProfTable is used for that purpose.
*/
unsigned char** ppJitProfTable; // Used to refresh pJitProfTable
#endif
#if defined(WITH_PROFILER) || defined(WITH_DEBUGGER)
bool debugIsMethodEntry; // used for method entry event triggers
#endif
#if defined(WITH_TRACKREF_CHECKS)
int debugTrackedRefStart; // tracked refs from prior invocations
#endif
#if defined(WITH_JIT)
struct JitToInterpEntries jitToInterpEntries;
int currTraceRun;
int totalTraceLen; // Number of Dalvik insts in trace
const u2* currTraceHead; // Start of the trace we're building
const u2* currRunHead; // Start of run we're building
int currRunLen; // Length of run in 16-bit words
int lastThreshFilter;
const u2* lastPC; // Stage the PC first for the threaded interpreter
intptr_t threshFilter[JIT_TRACE_THRESH_FILTER_SIZE];
JitTraceRun trace[MAX_JIT_RUN_LEN];
double calleeSave[JIT_CALLEE_SAVE_DOUBLE_COUNT];
#endif
} InterpState;
/*
* These are generated from InterpCore.h.
*/
extern bool dvmInterpretDbg(Thread* self, InterpState* interpState);
extern bool dvmInterpretStd(Thread* self, InterpState* interpState);
#define INTERP_STD 0
#define INTERP_DBG 1
/*
* "mterp" interpreter.
*/
extern bool dvmMterpStd(Thread* self, InterpState* interpState);
/*
* Get the "this" pointer from the current frame.
*/
Object* dvmGetThisPtr(const Method* method, const u4* fp);
/*
* Verify that our tracked local references are valid.
*/
void dvmInterpCheckTrackedRefs(Thread* self, const Method* method,
int debugTrackedRefStart);
/*
* Process switch statement.
*/
s4 dvmInterpHandlePackedSwitch(const u2* switchData, s4 testVal);
s4 dvmInterpHandleSparseSwitch(const u2* switchData, s4 testVal);
/*
* Process fill-array-data.
*/
bool dvmInterpHandleFillArrayData(ArrayObject* arrayObject,
const u2* arrayData);
/*
* Find an interface method.
*/
Method* dvmInterpFindInterfaceMethod(ClassObject* thisClass, u4 methodIdx,
const Method* method, DvmDex* methodClassDex);
/*
* Determine if the debugger or profiler is currently active. Used when
* selecting which interpreter to start or switch to.
*/
static inline bool dvmDebuggerOrProfilerActive(void)
{
return gDvm.debuggerActive
#if defined(WITH_PROFILER)
|| gDvm.activeProfilers != 0
#endif
;
}
#if defined(WITH_JIT)
/*
* Determine if the jit, debugger or profiler is currently active. Used when
* selecting which interpreter to switch to.
*/
static inline bool dvmJitDebuggerOrProfilerActive()
{
return gDvmJit.pProfTable != NULL
#if defined(WITH_PROFILER)
|| gDvm.activeProfilers != 0
#endif
||gDvm.debuggerActive;
}
#endif
#endif /*_DALVIK_INTERP_DEFS*/