This is ../.././gas/doc/as.info, produced by makeinfo version 4.8 from
../.././gas/doc/as.texinfo.
START-INFO-DIR-ENTRY
* As: (as). The GNU assembler.
* Gas: (as). The GNU assembler.
END-INFO-DIR-ENTRY
This file documents the GNU Assembler "as".
Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000, 2001, 2002
Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
Texts. A copy of the license is included in the section entitled "GNU
Free Documentation License".
File: as.info, Node: Top, Next: Overview, Up: (dir)
Using as
********
This file is a user guide to the GNU assembler `as' version 2.17.
This document is distributed under the terms of the GNU Free
Documentation License. A copy of the license is included in the
section entitled "GNU Free Documentation License".
* Menu:
* Overview:: Overview
* Invoking:: Command-Line Options
* Syntax:: Syntax
* Sections:: Sections and Relocation
* Symbols:: Symbols
* Expressions:: Expressions
* Pseudo Ops:: Assembler Directives
* Machine Dependencies:: Machine Dependent Features
* Reporting Bugs:: Reporting Bugs
* Acknowledgements:: Who Did What
* GNU Free Documentation License:: GNU Free Documentation License
* Index:: Index
File: as.info, Node: Overview, Next: Invoking, Prev: Top, Up: Top
1 Overview
**********
Here is a brief summary of how to invoke `as'. For details, *note
Command-Line Options: Invoking.
as [-a[cdhlns][=FILE]] [-alternate] [-D]
[-defsym SYM=VAL] [-f] [-g] [-gstabs]
[-gstabs+] [-gdwarf-2] [-help] [-I DIR] [-J]
[-K] [-L] [-listing-lhs-width=NUM]
[-listing-lhs-width2=NUM] [-listing-rhs-width=NUM]
[-listing-cont-lines=NUM] [-keep-locals] [-o
OBJFILE] [-R] [-reduce-memory-overheads] [-statistics]
[-v] [-version] [-version] [-W] [-warn]
[-fatal-warnings] [-w] [-x] [-Z] [@FILE]
[-target-help] [TARGET-OPTIONS]
[-|FILES ...]
_Target Alpha options:_
[-mCPU]
[-mdebug | -no-mdebug]
[-relax] [-g] [-GSIZE]
[-F] [-32addr]
_Target ARC options:_
[-marc[5|6|7|8]]
[-EB|-EL]
_Target ARM options:_
[-mcpu=PROCESSOR[+EXTENSION...]]
[-march=ARCHITECTURE[+EXTENSION...]]
[-mfpu=FLOATING-POINT-FORMAT]
[-mfloat-abi=ABI]
[-meabi=VER]
[-mthumb]
[-EB|-EL]
[-mapcs-32|-mapcs-26|-mapcs-float|
-mapcs-reentrant]
[-mthumb-interwork] [-k]
_Target CRIS options:_
[-underscore | -no-underscore]
[-pic] [-N]
[-emulation=criself | -emulation=crisaout]
[-march=v0_v10 | -march=v10 | -march=v32 | -march=common_v10_v32]
_Target D10V options:_
[-O]
_Target D30V options:_
[-O|-n|-N]
_Target i386 options:_
[-32|-64] [-n]
_Target i960 options:_
[-ACA|-ACA_A|-ACB|-ACC|-AKA|-AKB|
-AKC|-AMC]
[-b] [-no-relax]
_Target IA-64 options:_
[-mconstant-gp|-mauto-pic]
[-milp32|-milp64|-mlp64|-mp64]
[-mle|mbe]
[-mtune=itanium1|-mtune=itanium2]
[-munwind-check=warning|-munwind-check=error]
[-mhint.b=ok|-mhint.b=warning|-mhint.b=error]
[-x|-xexplicit] [-xauto] [-xdebug]
_Target IP2K options:_
[-mip2022|-mip2022ext]
_Target M32C options:_
[-m32c|-m16c]
_Target M32R options:_
[-m32rx|-[no-]warn-explicit-parallel-conflicts|
-W[n]p]
_Target M680X0 options:_
[-l] [-m68000|-m68010|-m68020|...]
_Target M68HC11 options:_
[-m68hc11|-m68hc12|-m68hcs12]
[-mshort|-mlong]
[-mshort-double|-mlong-double]
[-force-long-branchs] [-short-branchs]
[-strict-direct-mode] [-print-insn-syntax]
[-print-opcodes] [-generate-example]
_Target MCORE options:_
[-jsri2bsr] [-sifilter] [-relax]
[-mcpu=[210|340]]
_Target MIPS options:_
[-nocpp] [-EL] [-EB] [-O[OPTIMIZATION LEVEL]]
[-g[DEBUG LEVEL]] [-G NUM] [-KPIC] [-call_shared]
[-non_shared] [-xgot]
[-mabi=ABI] [-32] [-n32] [-64] [-mfp32] [-mgp32]
[-march=CPU] [-mtune=CPU] [-mips1] [-mips2]
[-mips3] [-mips4] [-mips5] [-mips32] [-mips32r2]
[-mips64] [-mips64r2]
[-construct-floats] [-no-construct-floats]
[-trap] [-no-break] [-break] [-no-trap]
[-mfix7000] [-mno-fix7000]
[-mips16] [-no-mips16]
[-mips3d] [-no-mips3d]
[-mdmx] [-no-mdmx]
[-mdsp] [-mno-dsp]
[-mmt] [-mno-mt]
[-mdebug] [-no-mdebug]
[-mpdr] [-mno-pdr]
_Target MMIX options:_
[-fixed-special-register-names] [-globalize-symbols]
[-gnu-syntax] [-relax] [-no-predefined-symbols]
[-no-expand] [-no-merge-gregs] [-x]
[-linker-allocated-gregs]
_Target PDP11 options:_
[-mpic|-mno-pic] [-mall] [-mno-extensions]
[-mEXTENSION|-mno-EXTENSION]
[-mCPU] [-mMACHINE]
_Target picoJava options:_
[-mb|-me]
_Target PowerPC options:_
[-mpwrx|-mpwr2|-mpwr|-m601|-mppc|-mppc32|-m603|-m604|
-m403|-m405|-mppc64|-m620|-mppc64bridge|-mbooke|
-mbooke32|-mbooke64]
[-mcom|-many|-maltivec] [-memb]
[-mregnames|-mno-regnames]
[-mrelocatable|-mrelocatable-lib]
[-mlittle|-mlittle-endian|-mbig|-mbig-endian]
[-msolaris|-mno-solaris]
_Target SPARC options:_
[-Av6|-Av7|-Av8|-Asparclet|-Asparclite
-Av8plus|-Av8plusa|-Av9|-Av9a]
[-xarch=v8plus|-xarch=v8plusa] [-bump]
[-32|-64]
_Target TIC54X options:_
[-mcpu=54[123589]|-mcpu=54[56]lp] [-mfar-mode|-mf]
[-merrors-to-file <FILENAME>|-me <FILENAME>]
_Target Z80 options:_
[-z80] [-r800]
[ -ignore-undocumented-instructions] [-Wnud]
[ -ignore-unportable-instructions] [-Wnup]
[ -warn-undocumented-instructions] [-Wud]
[ -warn-unportable-instructions] [-Wup]
[ -forbid-undocumented-instructions] [-Fud]
[ -forbid-unportable-instructions] [-Fup]
_Target Xtensa options:_
[-[no-]text-section-literals] [-[no-]absolute-literals]
[-[no-]target-align] [-[no-]longcalls]
[-[no-]transform]
[-rename-section OLDNAME=NEWNAME]
`@FILE'
Read command-line options from FILE. The options read are
inserted in place of the original @FILE option. If FILE does not
exist, or cannot be read, then the option will be treated
literally, and not removed.
Options in FILE are separated by whitespace. A whitespace
character may be included in an option by surrounding the entire
option in either single or double quotes. Any character
(including a backslash) may be included by prefixing the character
to be included with a backslash. The FILE may itself contain
additional @FILE options; any such options will be processed
recursively.
`-a[cdhlmns]'
Turn on listings, in any of a variety of ways:
`-ac'
omit false conditionals
`-ad'
omit debugging directives
`-ah'
include high-level source
`-al'
include assembly
`-am'
include macro expansions
`-an'
omit forms processing
`-as'
include symbols
`=file'
set the name of the listing file
You may combine these options; for example, use `-aln' for assembly
listing without forms processing. The `=file' option, if used,
must be the last one. By itself, `-a' defaults to `-ahls'.
`--alternate'
Begin in alternate macro mode, see *Note `.altmacro': Altmacro.
`-D'
Ignored. This option is accepted for script compatibility with
calls to other assemblers.
`--defsym SYM=VALUE'
Define the symbol SYM to be VALUE before assembling the input file.
VALUE must be an integer constant. As in C, a leading `0x'
indicates a hexadecimal value, and a leading `0' indicates an
octal value.
`-f'
"fast"--skip whitespace and comment preprocessing (assume source is
compiler output).
`-g'
`--gen-debug'
Generate debugging information for each assembler source line
using whichever debug format is preferred by the target. This
currently means either STABS, ECOFF or DWARF2.
`--gstabs'
Generate stabs debugging information for each assembler line. This
may help debugging assembler code, if the debugger can handle it.
`--gstabs+'
Generate stabs debugging information for each assembler line, with
GNU extensions that probably only gdb can handle, and that could
make other debuggers crash or refuse to read your program. This
may help debugging assembler code. Currently the only GNU
extension is the location of the current working directory at
assembling time.
`--gdwarf-2'
Generate DWARF2 debugging information for each assembler line.
This may help debugging assembler code, if the debugger can handle
it. Note--this option is only supported by some targets, not all
of them.
`--help'
Print a summary of the command line options and exit.
`--target-help'
Print a summary of all target specific options and exit.
`-I DIR'
Add directory DIR to the search list for `.include' directives.
`-J'
Don't warn about signed overflow.
`-K'
Issue warnings when difference tables altered for long
displacements.
`-L'
`--keep-locals'
Keep (in the symbol table) local symbols. On traditional a.out
systems these start with `L', but different systems have different
local label prefixes.
`--listing-lhs-width=NUMBER'
Set the maximum width, in words, of the output data column for an
assembler listing to NUMBER.
`--listing-lhs-width2=NUMBER'
Set the maximum width, in words, of the output data column for
continuation lines in an assembler listing to NUMBER.
`--listing-rhs-width=NUMBER'
Set the maximum width of an input source line, as displayed in a
listing, to NUMBER bytes.
`--listing-cont-lines=NUMBER'
Set the maximum number of lines printed in a listing for a single
line of input to NUMBER + 1.
`-o OBJFILE'
Name the object-file output from `as' OBJFILE.
`-R'
Fold the data section into the text section.
Set the default size of GAS's hash tables to a prime number close
to NUMBER. Increasing this value can reduce the length of time it
takes the assembler to perform its tasks, at the expense of
increasing the assembler's memory requirements. Similarly
reducing this value can reduce the memory requirements at the
expense of speed.
`--reduce-memory-overheads'
This option reduces GAS's memory requirements, at the expense of
making the assembly processes slower. Currently this switch is a
synonym for `--hash-size=4051', but in the future it may have
other effects as well.
`--statistics'
Print the maximum space (in bytes) and total time (in seconds)
used by assembly.
`--strip-local-absolute'
Remove local absolute symbols from the outgoing symbol table.
`-v'
`-version'
Print the `as' version.
`--version'
Print the `as' version and exit.
`-W'
`--no-warn'
Suppress warning messages.
`--fatal-warnings'
Treat warnings as errors.
`--warn'
Don't suppress warning messages or treat them as errors.
`-w'
Ignored.
`-x'
Ignored.
`-Z'
Generate an object file even after errors.
`-- | FILES ...'
Standard input, or source files to assemble.
The following options are available when as is configured for an ARC
processor.
`-marc[5|6|7|8]'
This option selects the core processor variant.
`-EB | -EL'
Select either big-endian (-EB) or little-endian (-EL) output.
The following options are available when as is configured for the ARM
processor family.
`-mcpu=PROCESSOR[+EXTENSION...]'
Specify which ARM processor variant is the target.
`-march=ARCHITECTURE[+EXTENSION...]'
Specify which ARM architecture variant is used by the target.
`-mfpu=FLOATING-POINT-FORMAT'
Select which Floating Point architecture is the target.
`-mfloat-abi=ABI'
Select which floating point ABI is in use.
`-mthumb'
Enable Thumb only instruction decoding.
`-mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant'
Select which procedure calling convention is in use.
`-EB | -EL'
Select either big-endian (-EB) or little-endian (-EL) output.
`-mthumb-interwork'
Specify that the code has been generated with interworking between
Thumb and ARM code in mind.
`-k'
Specify that PIC code has been generated.
See the info pages for documentation of the CRIS-specific options.
The following options are available when as is configured for a D10V
processor.
`-O'
Optimize output by parallelizing instructions.
The following options are available when as is configured for a D30V
processor.
`-O'
Optimize output by parallelizing instructions.
`-n'
Warn when nops are generated.
`-N'
Warn when a nop after a 32-bit multiply instruction is generated.
The following options are available when as is configured for the
Intel 80960 processor.
`-ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC'
Specify which variant of the 960 architecture is the target.
`-b'
Add code to collect statistics about branches taken.
`-no-relax'
Do not alter compare-and-branch instructions for long
displacements; error if necessary.
The following options are available when as is configured for the
Ubicom IP2K series.
`-mip2022ext'
Specifies that the extended IP2022 instructions are allowed.
`-mip2022'
Restores the default behaviour, which restricts the permitted
instructions to just the basic IP2022 ones.
The following options are available when as is configured for the
Renesas M32C and M16C processors.
`-m32c'
Assemble M32C instructions.
`-m16c'
Assemble M16C instructions (the default).
The following options are available when as is configured for the
Renesas M32R (formerly Mitsubishi M32R) series.
`--m32rx'
Specify which processor in the M32R family is the target. The
default is normally the M32R, but this option changes it to the
M32RX.
`--warn-explicit-parallel-conflicts or --Wp'
Produce warning messages when questionable parallel constructs are
encountered.
`--no-warn-explicit-parallel-conflicts or --Wnp'
Do not produce warning messages when questionable parallel
constructs are encountered.
The following options are available when as is configured for the
Motorola 68000 series.
`-l'
Shorten references to undefined symbols, to one word instead of
two.
`-m68000 | -m68008 | -m68010 | -m68020 | -m68030'
`| -m68040 | -m68060 | -m68302 | -m68331 | -m68332'
`| -m68333 | -m68340 | -mcpu32 | -m5200'
Specify what processor in the 68000 family is the target. The
default is normally the 68020, but this can be changed at
configuration time.
`-m68881 | -m68882 | -mno-68881 | -mno-68882'
The target machine does (or does not) have a floating-point
coprocessor. The default is to assume a coprocessor for 68020,
68030, and cpu32. Although the basic 68000 is not compatible with
the 68881, a combination of the two can be specified, since it's
possible to do emulation of the coprocessor instructions with the
main processor.
`-m68851 | -mno-68851'
The target machine does (or does not) have a memory-management
unit coprocessor. The default is to assume an MMU for 68020 and
up.
For details about the PDP-11 machine dependent features options, see
*Note PDP-11-Options::.
`-mpic | -mno-pic'
Generate position-independent (or position-dependent) code. The
default is `-mpic'.
`-mall'
`-mall-extensions'
Enable all instruction set extensions. This is the default.
`-mno-extensions'
Disable all instruction set extensions.
`-mEXTENSION | -mno-EXTENSION'
Enable (or disable) a particular instruction set extension.
`-mCPU'
Enable the instruction set extensions supported by a particular
CPU, and disable all other extensions.
`-mMACHINE'
Enable the instruction set extensions supported by a particular
machine model, and disable all other extensions.
The following options are available when as is configured for a
picoJava processor.
`-mb'
Generate "big endian" format output.
`-ml'
Generate "little endian" format output.
The following options are available when as is configured for the
Motorola 68HC11 or 68HC12 series.
`-m68hc11 | -m68hc12 | -m68hcs12'
Specify what processor is the target. The default is defined by
the configuration option when building the assembler.
`-mshort'
Specify to use the 16-bit integer ABI.
`-mlong'
Specify to use the 32-bit integer ABI.
`-mshort-double'
Specify to use the 32-bit double ABI.
`-mlong-double'
Specify to use the 64-bit double ABI.
`--force-long-branchs'
Relative branches are turned into absolute ones. This concerns
conditional branches, unconditional branches and branches to a sub
routine.
`-S | --short-branchs'
Do not turn relative branchs into absolute ones when the offset is
out of range.
`--strict-direct-mode'
Do not turn the direct addressing mode into extended addressing
mode when the instruction does not support direct addressing mode.
`--print-insn-syntax'
Print the syntax of instruction in case of error.
`--print-opcodes'
print the list of instructions with syntax and then exit.
`--generate-example'
print an example of instruction for each possible instruction and
then exit. This option is only useful for testing `as'.
The following options are available when `as' is configured for the
SPARC architecture:
`-Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite'
`-Av8plus | -Av8plusa | -Av9 | -Av9a'
Explicitly select a variant of the SPARC architecture.
`-Av8plus' and `-Av8plusa' select a 32 bit environment. `-Av9'
and `-Av9a' select a 64 bit environment.
`-Av8plusa' and `-Av9a' enable the SPARC V9 instruction set with
UltraSPARC extensions.
`-xarch=v8plus | -xarch=v8plusa'
For compatibility with the Solaris v9 assembler. These options are
equivalent to -Av8plus and -Av8plusa, respectively.
`-bump'
Warn when the assembler switches to another architecture.
The following options are available when as is configured for the
'c54x architecture.
`-mfar-mode'
Enable extended addressing mode. All addresses and relocations
will assume extended addressing (usually 23 bits).
`-mcpu=CPU_VERSION'
Sets the CPU version being compiled for.
`-merrors-to-file FILENAME'
Redirect error output to a file, for broken systems which don't
support such behaviour in the shell.
The following options are available when as is configured for a MIPS
processor.
`-G NUM'
This option sets the largest size of an object that can be
referenced implicitly with the `gp' register. It is only accepted
for targets that use ECOFF format, such as a DECstation running
Ultrix. The default value is 8.
`-EB'
Generate "big endian" format output.
`-EL'
Generate "little endian" format output.
`-mips1'
`-mips2'
`-mips3'
`-mips4'
`-mips5'
`-mips32'
`-mips32r2'
`-mips64'
`-mips64r2'
Generate code for a particular MIPS Instruction Set Architecture
level. `-mips1' is an alias for `-march=r3000', `-mips2' is an
alias for `-march=r6000', `-mips3' is an alias for `-march=r4000'
and `-mips4' is an alias for `-march=r8000'. `-mips5', `-mips32',
`-mips32r2', `-mips64', and `-mips64r2' correspond to generic
`MIPS V', `MIPS32', `MIPS32 Release 2', `MIPS64', and `MIPS64
Release 2' ISA processors, respectively.
`-march=CPU'
Generate code for a particular MIPS cpu.
`-mtune=CPU'
Schedule and tune for a particular MIPS cpu.
`-mfix7000'
`-mno-fix7000'
Cause nops to be inserted if the read of the destination register
of an mfhi or mflo instruction occurs in the following two
instructions.
`-mdebug'
`-no-mdebug'
Cause stabs-style debugging output to go into an ECOFF-style
.mdebug section instead of the standard ELF .stabs sections.
`-mpdr'
`-mno-pdr'
Control generation of `.pdr' sections.
`-mgp32'
`-mfp32'
The register sizes are normally inferred from the ISA and ABI, but
these flags force a certain group of registers to be treated as 32
bits wide at all times. `-mgp32' controls the size of
general-purpose registers and `-mfp32' controls the size of
floating-point registers.
`-mips16'
`-no-mips16'
Generate code for the MIPS 16 processor. This is equivalent to
putting `.set mips16' at the start of the assembly file.
`-no-mips16' turns off this option.
`-mips3d'
`-no-mips3d'
Generate code for the MIPS-3D Application Specific Extension.
This tells the assembler to accept MIPS-3D instructions.
`-no-mips3d' turns off this option.
`-mdmx'
`-no-mdmx'
Generate code for the MDMX Application Specific Extension. This
tells the assembler to accept MDMX instructions. `-no-mdmx' turns
off this option.
`-mdsp'
`-mno-dsp'
Generate code for the DSP Application Specific Extension. This
tells the assembler to accept DSP instructions. `-mno-dsp' turns
off this option.
`-mmt'
`-mno-mt'
Generate code for the MT Application Specific Extension. This
tells the assembler to accept MT instructions. `-mno-mt' turns
off this option.
`--construct-floats'
`--no-construct-floats'
The `--no-construct-floats' option disables the construction of
double width floating point constants by loading the two halves of
the value into the two single width floating point registers that
make up the double width register. By default
`--construct-floats' is selected, allowing construction of these
floating point constants.
`--emulation=NAME'
This option causes `as' to emulate `as' configured for some other
target, in all respects, including output format (choosing between
ELF and ECOFF only), handling of pseudo-opcodes which may generate
debugging information or store symbol table information, and
default endianness. The available configuration names are:
`mipsecoff', `mipself', `mipslecoff', `mipsbecoff', `mipslelf',
`mipsbelf'. The first two do not alter the default endianness
from that of the primary target for which the assembler was
configured; the others change the default to little- or big-endian
as indicated by the `b' or `l' in the name. Using `-EB' or `-EL'
will override the endianness selection in any case.
This option is currently supported only when the primary target
`as' is configured for is a MIPS ELF or ECOFF target.
Furthermore, the primary target or others specified with
`--enable-targets=...' at configuration time must include support
for the other format, if both are to be available. For example,
the Irix 5 configuration includes support for both.
Eventually, this option will support more configurations, with more
fine-grained control over the assembler's behavior, and will be
supported for more processors.
`-nocpp'
`as' ignores this option. It is accepted for compatibility with
the native tools.
`--trap'
`--no-trap'
`--break'
`--no-break'
Control how to deal with multiplication overflow and division by
zero. `--trap' or `--no-break' (which are synonyms) take a trap
exception (and only work for Instruction Set Architecture level 2
and higher); `--break' or `--no-trap' (also synonyms, and the
default) take a break exception.
`-n'
When this option is used, `as' will issue a warning every time it
generates a nop instruction from a macro.
The following options are available when as is configured for an
MCore processor.
`-jsri2bsr'
`-nojsri2bsr'
Enable or disable the JSRI to BSR transformation. By default this
is enabled. The command line option `-nojsri2bsr' can be used to
disable it.
`-sifilter'
`-nosifilter'
Enable or disable the silicon filter behaviour. By default this
is disabled. The default can be overridden by the `-sifilter'
command line option.
`-relax'
Alter jump instructions for long displacements.
`-mcpu=[210|340]'
Select the cpu type on the target hardware. This controls which
instructions can be assembled.
`-EB'
Assemble for a big endian target.
`-EL'
Assemble for a little endian target.
See the info pages for documentation of the MMIX-specific options.
The following options are available when as is configured for an
Xtensa processor.
`--text-section-literals | --no-text-section-literals'
With `--text-section-literals', literal pools are interspersed in
the text section. The default is `--no-text-section-literals',
which places literals in a separate section in the output file.
These options only affect literals referenced via PC-relative
`L32R' instructions; literals for absolute mode `L32R'
instructions are handled separately.
`--absolute-literals | --no-absolute-literals'
Indicate to the assembler whether `L32R' instructions use absolute
or PC-relative addressing. The default is to assume absolute
addressing if the Xtensa processor includes the absolute `L32R'
addressing option. Otherwise, only the PC-relative `L32R' mode
can be used.
`--target-align | --no-target-align'
Enable or disable automatic alignment to reduce branch penalties
at the expense of some code density. The default is
`--target-align'.
`--longcalls | --no-longcalls'
Enable or disable transformation of call instructions to allow
calls across a greater range of addresses. The default is
`--no-longcalls'.
`--transform | --no-transform'
Enable or disable all assembler transformations of Xtensa
instructions. The default is `--transform'; `--no-transform'
should be used only in the rare cases when the instructions must
be exactly as specified in the assembly source.
The following options are available when as is configured for a Z80
family processor.
`-z80'
Assemble for Z80 processor.
`-r800'
Assemble for R800 processor.
`-ignore-undocumented-instructions'
`-Wnud'
Assemble undocumented Z80 instructions that also work on R800
without warning.
`-ignore-unportable-instructions'
`-Wnup'
Assemble all undocumented Z80 instructions without warning.
`-warn-undocumented-instructions'
`-Wud'
Issue a warning for undocumented Z80 instructions that also work
on R800.
`-warn-unportable-instructions'
`-Wup'
Issue a warning for undocumented Z80 instructions that do notwork
on R800.
`-forbid-undocumented-instructions'
`-Fud'
Treat all undocumented instructions as errors.
`-forbid-unportable-instructions'
`-Fup'
Treat undocumented Z80 intructions that do notwork on R800 as
errors.
* Menu:
* Manual:: Structure of this Manual
* GNU Assembler:: The GNU Assembler
* Object Formats:: Object File Formats
* Command Line:: Command Line
* Input Files:: Input Files
* Object:: Output (Object) File
* Errors:: Error and Warning Messages
File: as.info, Node: Manual, Next: GNU Assembler, Up: Overview
1.1 Structure of this Manual
============================
This manual is intended to describe what you need to know to use GNU
`as'. We cover the syntax expected in source files, including notation
for symbols, constants, and expressions; the directives that `as'
understands; and of course how to invoke `as'.
This manual also describes some of the machine-dependent features of
various flavors of the assembler.
On the other hand, this manual is _not_ intended as an introduction
to programming in assembly language--let alone programming in general!
In a similar vein, we make no attempt to introduce the machine
architecture; we do _not_ describe the instruction set, standard
mnemonics, registers or addressing modes that are standard to a
particular architecture. You may want to consult the manufacturer's
machine architecture manual for this information.
File: as.info, Node: GNU Assembler, Next: Object Formats, Prev: Manual, Up: Overview
1.2 The GNU Assembler
=====================
GNU `as' is really a family of assemblers. If you use (or have used)
the GNU assembler on one architecture, you should find a fairly similar
environment when you use it on another architecture. Each version has
much in common with the others, including object file formats, most
assembler directives (often called "pseudo-ops") and assembler syntax.
`as' is primarily intended to assemble the output of the GNU C
compiler `gcc' for use by the linker `ld'. Nevertheless, we've tried
to make `as' assemble correctly everything that other assemblers for
the same machine would assemble. Any exceptions are documented
explicitly (*note Machine Dependencies::). This doesn't mean `as'
always uses the same syntax as another assembler for the same
architecture; for example, we know of several incompatible versions of
680x0 assembly language syntax.
Unlike older assemblers, `as' is designed to assemble a source
program in one pass of the source file. This has a subtle impact on the
`.org' directive (*note `.org': Org.).
File: as.info, Node: Object Formats, Next: Command Line, Prev: GNU Assembler, Up: Overview
1.3 Object File Formats
=======================
The GNU assembler can be configured to produce several alternative
object file formats. For the most part, this does not affect how you
write assembly language programs; but directives for debugging symbols
are typically different in different file formats. *Note Symbol
Attributes: Symbol Attributes.
File: as.info, Node: Command Line, Next: Input Files, Prev: Object Formats, Up: Overview
1.4 Command Line
================
After the program name `as', the command line may contain options and
file names. Options may appear in any order, and may be before, after,
or between file names. The order of file names is significant.
`--' (two hyphens) by itself names the standard input file
explicitly, as one of the files for `as' to assemble.
Except for `--' any command line argument that begins with a hyphen
(`-') is an option. Each option changes the behavior of `as'. No
option changes the way another option works. An option is a `-'
followed by one or more letters; the case of the letter is important.
All options are optional.
Some options expect exactly one file name to follow them. The file
name may either immediately follow the option's letter (compatible with
older assemblers) or it may be the next command argument (GNU
standard). These two command lines are equivalent:
as -o my-object-file.o mumble.s
as -omy-object-file.o mumble.s
File: as.info, Node: Input Files, Next: Object, Prev: Command Line, Up: Overview
1.5 Input Files
===============
We use the phrase "source program", abbreviated "source", to describe
the program input to one run of `as'. The program may be in one or
more files; how the source is partitioned into files doesn't change the
meaning of the source.
The source program is a concatenation of the text in all the files,
in the order specified.
Each time you run `as' it assembles exactly one source program. The
source program is made up of one or more files. (The standard input is
also a file.)
You give `as' a command line that has zero or more input file names.
The input files are read (from left file name to right). A command
line argument (in any position) that has no special meaning is taken to
be an input file name.
If you give `as' no file names it attempts to read one input file
from the `as' standard input, which is normally your terminal. You may
have to type <ctl-D> to tell `as' there is no more program to assemble.
Use `--' if you need to explicitly name the standard input file in
your command line.
If the source is empty, `as' produces a small, empty object file.
Filenames and Line-numbers
--------------------------
There are two ways of locating a line in the input file (or files) and
either may be used in reporting error messages. One way refers to a
line number in a physical file; the other refers to a line number in a
"logical" file. *Note Error and Warning Messages: Errors.
"Physical files" are those files named in the command line given to
`as'.
"Logical files" are simply names declared explicitly by assembler
directives; they bear no relation to physical files. Logical file
names help error messages reflect the original source file, when `as'
source is itself synthesized from other files. `as' understands the
`#' directives emitted by the `gcc' preprocessor. See also *Note
`.file': File.
File: as.info, Node: Object, Next: Errors, Prev: Input Files, Up: Overview
1.6 Output (Object) File
========================
Every time you run `as' it produces an output file, which is your
assembly language program translated into numbers. This file is the
object file. Its default name is `a.out'. You can give it another
name by using the `-o' option. Conventionally, object file names end
with `.o'. The default name is used for historical reasons: older
assemblers were capable of assembling self-contained programs directly
into a runnable program. (For some formats, this isn't currently
possible, but it can be done for the `a.out' format.)
The object file is meant for input to the linker `ld'. It contains
assembled program code, information to help `ld' integrate the
assembled program into a runnable file, and (optionally) symbolic
information for the debugger.
File: as.info, Node: Errors, Prev: Object, Up: Overview
1.7 Error and Warning Messages
==============================
`as' may write warnings and error messages to the standard error file
(usually your terminal). This should not happen when a compiler runs
`as' automatically. Warnings report an assumption made so that `as'
could keep assembling a flawed program; errors report a grave problem
that stops the assembly.
Warning messages have the format
file_name:NNN:Warning Message Text
(where NNN is a line number). If a logical file name has been given
(*note `.file': File.) it is used for the filename, otherwise the name
of the current input file is used. If a logical line number was given
(*note `.line': Line.) then it is used to calculate the number printed,
otherwise the actual line in the current source file is printed. The
message text is intended to be self explanatory (in the grand Unix
tradition).
Error messages have the format
file_name:NNN:FATAL:Error Message Text
The file name and line number are derived as for warning messages.
The actual message text may be rather less explanatory because many of
them aren't supposed to happen.
File: as.info, Node: Invoking, Next: Syntax, Prev: Overview, Up: Top
2 Command-Line Options
**********************
This chapter describes command-line options available in _all_ versions
of the GNU assembler; *note Machine Dependencies::, for options specific
to particular machine architectures.
If you are invoking `as' via the GNU C compiler, you can use the
`-Wa' option to pass arguments through to the assembler. The assembler
arguments must be separated from each other (and the `-Wa') by commas.
For example:
gcc -c -g -O -Wa,-alh,-L file.c
This passes two options to the assembler: `-alh' (emit a listing to
standard output with high-level and assembly source) and `-L' (retain
local symbols in the symbol table).
Usually you do not need to use this `-Wa' mechanism, since many
compiler command-line options are automatically passed to the assembler
by the compiler. (You can call the GNU compiler driver with the `-v'
option to see precisely what options it passes to each compilation
pass, including the assembler.)
* Menu:
* a:: -a[cdhlns] enable listings
* alternate:: --alternate enable alternate macro syntax
* D:: -D for compatibility
* f:: -f to work faster
* I:: -I for .include search path
* K:: -K for difference tables
* L:: -L to retain local labels
* listing:: --listing-XXX to configure listing output
* M:: -M or --mri to assemble in MRI compatibility mode
* MD:: --MD for dependency tracking
* o:: -o to name the object file
* R:: -R to join data and text sections
* statistics:: --statistics to see statistics about assembly
* traditional-format:: --traditional-format for compatible output
* v:: -v to announce version
* W:: -W, --no-warn, --warn, --fatal-warnings to control warnings
* Z:: -Z to make object file even after errors
File: as.info, Node: a, Next: alternate, Up: Invoking
2.1 Enable Listings: `-a[cdhlns]'
=================================
These options enable listing output from the assembler. By itself,
`-a' requests high-level, assembly, and symbols listing. You can use
other letters to select specific options for the list: `-ah' requests a
high-level language listing, `-al' requests an output-program assembly
listing, and `-as' requests a symbol table listing. High-level
listings require that a compiler debugging option like `-g' be used,
and that assembly listings (`-al') be requested also.
Use the `-ac' option to omit false conditionals from a listing. Any
lines which are not assembled because of a false `.if' (or `.ifdef', or
any other conditional), or a true `.if' followed by an `.else', will be
omitted from the listing.
Use the `-ad' option to omit debugging directives from the listing.
Once you have specified one of these options, you can further control
listing output and its appearance using the directives `.list',
`.nolist', `.psize', `.eject', `.title', and `.sbttl'. The `-an'
option turns off all forms processing. If you do not request listing
output with one of the `-a' options, the listing-control directives
have no effect.
The letters after `-a' may be combined into one option, _e.g._,
`-aln'.
Note if the assembler source is coming from the standard input (eg
because it is being created by `gcc' and the `-pipe' command line switch
is being used) then the listing will not contain any comments or
preprocessor directives. This is because the listing code buffers
input source lines from stdin only after they have been preprocessed by
the assembler. This reduces memory usage and makes the code more
efficient.
File: as.info, Node: alternate, Next: D, Prev: a, Up: Invoking
2.2 `--alternate'
=================
Begin in alternate macro mode, see *Note `.altmacro': Altmacro.
File: as.info, Node: D, Next: f, Prev: alternate, Up: Invoking
2.3 `-D'
========
This option has no effect whatsoever, but it is accepted to make it more
likely that scripts written for other assemblers also work with `as'.
File: as.info, Node: f, Next: I, Prev: D, Up: Invoking
2.4 Work Faster: `-f'
=====================
`-f' should only be used when assembling programs written by a
(trusted) compiler. `-f' stops the assembler from doing whitespace and
comment preprocessing on the input file(s) before assembling them.
*Note Preprocessing: Preprocessing.
_Warning:_ if you use `-f' when the files actually need to be
preprocessed (if they contain comments, for example), `as' does
not work correctly.
File: as.info, Node: I, Next: K, Prev: f, Up: Invoking
2.5 `.include' Search Path: `-I' PATH
=====================================
Use this option to add a PATH to the list of directories `as' searches
for files specified in `.include' directives (*note `.include':
Include.). You may use `-I' as many times as necessary to include a
variety of paths. The current working directory is always searched
first; after that, `as' searches any `-I' directories in the same order
as they were specified (left to right) on the command line.
File: as.info, Node: K, Next: L, Prev: I, Up: Invoking
2.6 Difference Tables: `-K'
===========================
`as' sometimes alters the code emitted for directives of the form
`.word SYM1-SYM2'; *note `.word': Word. You can use the `-K' option if
you want a warning issued when this is done.
File: as.info, Node: L, Next: listing, Prev: K, Up: Invoking
2.7 Include Local Labels: `-L'
==============================
Labels beginning with `L' (upper case only) are called "local labels".
*Note Symbol Names::. Normally you do not see such labels when
debugging, because they are intended for the use of programs (like
compilers) that compose assembler programs, not for your notice.
Normally both `as' and `ld' discard such labels, so you do not normally
debug with them.
This option tells `as' to retain those `L...' symbols in the object
file. Usually if you do this you also tell the linker `ld' to preserve
symbols whose names begin with `L'.
By default, a local label is any label beginning with `L', but each
target is allowed to redefine the local label prefix. On the HPPA
local labels begin with `L$'.
File: as.info, Node: listing, Next: M, Prev: L, Up: Invoking
2.8 Configuring listing output: `--listing'
===========================================
The listing feature of the assembler can be enabled via the command
line switch `-a' (*note a::). This feature combines the input source
file(s) with a hex dump of the corresponding locations in the output
object file, and displays them as a listing file. The format of this
listing can be controlled by pseudo ops inside the assembler source
(*note List:: *note Title:: *note Sbttl:: *note Psize:: *note Eject::)
and also by the following switches:
`--listing-lhs-width=`number''
Sets the maximum width, in words, of the first line of the hex
byte dump. This dump appears on the left hand side of the listing
output.
`--listing-lhs-width2=`number''
Sets the maximum width, in words, of any further lines of the hex
byte dump for a given input source line. If this value is not
specified, it defaults to being the same as the value specified
for `--listing-lhs-width'. If neither switch is used the default
is to one.
`--listing-rhs-width=`number''
Sets the maximum width, in characters, of the source line that is
displayed alongside the hex dump. The default value for this
parameter is 100. The source line is displayed on the right hand
side of the listing output.
`--listing-cont-lines=`number''
Sets the maximum number of continuation lines of hex dump that
will be displayed for a given single line of source input. The
default value is 4.
File: as.info, Node: M, Next: MD, Prev: listing, Up: Invoking
2.9 Assemble in MRI Compatibility Mode: `-M'
============================================
The `-M' or `--mri' option selects MRI compatibility mode. This
changes the syntax and pseudo-op handling of `as' to make it compatible
with the `ASM68K' or the `ASM960' (depending upon the configured
target) assembler from Microtec Research. The exact nature of the MRI
syntax will not be documented here; see the MRI manuals for more
information. Note in particular that the handling of macros and macro
arguments is somewhat different. The purpose of this option is to
permit assembling existing MRI assembler code using `as'.
The MRI compatibility is not complete. Certain operations of the
MRI assembler depend upon its object file format, and can not be
supported using other object file formats. Supporting these would
require enhancing each object file format individually. These are:
* global symbols in common section
The m68k MRI assembler supports common sections which are merged
by the linker. Other object file formats do not support this.
`as' handles common sections by treating them as a single common
symbol. It permits local symbols to be defined within a common
section, but it can not support global symbols, since it has no
way to describe them.
* complex relocations
The MRI assemblers support relocations against a negated section
address, and relocations which combine the start addresses of two
or more sections. These are not support by other object file
formats.
* `END' pseudo-op specifying start address
The MRI `END' pseudo-op permits the specification of a start
address. This is not supported by other object file formats. The
start address may instead be specified using the `-e' option to
the linker, or in a linker script.
* `IDNT', `.ident' and `NAME' pseudo-ops
The MRI `IDNT', `.ident' and `NAME' pseudo-ops assign a module
name to the output file. This is not supported by other object
file formats.
* `ORG' pseudo-op
The m68k MRI `ORG' pseudo-op begins an absolute section at a given
address. This differs from the usual `as' `.org' pseudo-op, which
changes the location within the current section. Absolute
sections are not supported by other object file formats. The
address of a section may be assigned within a linker script.
There are some other features of the MRI assembler which are not
supported by `as', typically either because they are difficult or
because they seem of little consequence. Some of these may be
supported in future releases.
* EBCDIC strings
EBCDIC strings are not supported.
* packed binary coded decimal
Packed binary coded decimal is not supported. This means that the
`DC.P' and `DCB.P' pseudo-ops are not supported.
* `FEQU' pseudo-op
The m68k `FEQU' pseudo-op is not supported.
* `NOOBJ' pseudo-op
The m68k `NOOBJ' pseudo-op is not supported.
* `OPT' branch control options
The m68k `OPT' branch control options--`B', `BRS', `BRB', `BRL',
and `BRW'--are ignored. `as' automatically relaxes all branches,
whether forward or backward, to an appropriate size, so these
options serve no purpose.
* `OPT' list control options
The following m68k `OPT' list control options are ignored: `C',
`CEX', `CL', `CRE', `E', `G', `I', `M', `MEX', `MC', `MD', `X'.
* other `OPT' options
The following m68k `OPT' options are ignored: `NEST', `O', `OLD',
`OP', `P', `PCO', `PCR', `PCS', `R'.
* `OPT' `D' option is default
The m68k `OPT' `D' option is the default, unlike the MRI assembler.
`OPT NOD' may be used to turn it off.
* `XREF' pseudo-op.
The m68k `XREF' pseudo-op is ignored.
* `.debug' pseudo-op
The i960 `.debug' pseudo-op is not supported.
* `.extended' pseudo-op
The i960 `.extended' pseudo-op is not supported.
* `.list' pseudo-op.
The various options of the i960 `.list' pseudo-op are not
supported.
* `.optimize' pseudo-op
The i960 `.optimize' pseudo-op is not supported.
* `.output' pseudo-op
The i960 `.output' pseudo-op is not supported.
* `.setreal' pseudo-op
The i960 `.setreal' pseudo-op is not supported.
File: as.info, Node: MD, Next: o, Prev: M, Up: Invoking
2.10 Dependency Tracking: `--MD'
================================
`as' can generate a dependency file for the file it creates. This file
consists of a single rule suitable for `make' describing the
dependencies of the main source file.
The rule is written to the file named in its argument.
This feature is used in the automatic updating of makefiles.
File: as.info, Node: o, Next: R, Prev: MD, Up: Invoking
2.11 Name the Object File: `-o'
===============================
There is always one object file output when you run `as'. By default
it has the name `a.out' (or `b.out', for Intel 960 targets only). You
use this option (which takes exactly one filename) to give the object
file a different name.
Whatever the object file is called, `as' overwrites any existing
file of the same name.
File: as.info, Node: R, Next: statistics, Prev: o, Up: Invoking
2.12 Join Data and Text Sections: `-R'
======================================
`-R' tells `as' to write the object file as if all data-section data
lives in the text section. This is only done at the very last moment:
your binary data are the same, but data section parts are relocated
differently. The data section part of your object file is zero bytes
long because all its bytes are appended to the text section. (*Note
Sections and Relocation: Sections.)
When you specify `-R' it would be possible to generate shorter
address displacements (because we do not have to cross between text and
data section). We refrain from doing this simply for compatibility with
older versions of `as'. In future, `-R' may work this way.
When `as' is configured for COFF or ELF output, this option is only
useful if you use sections named `.text' and `.data'.
`-R' is not supported for any of the HPPA targets. Using `-R'
generates a warning from `as'.
File: as.info, Node: statistics, Next: traditional-format, Prev: R, Up: Invoking
2.13 Display Assembly Statistics: `--statistics'
================================================
Use `--statistics' to display two statistics about the resources used by
`as': the maximum amount of space allocated during the assembly (in
bytes), and the total execution time taken for the assembly (in CPU
seconds).
File: as.info, Node: traditional-format, Next: v, Prev: statistics, Up: Invoking
2.14 Compatible Output: `--traditional-format'
==============================================
For some targets, the output of `as' is different in some ways from the
output of some existing assembler. This switch requests `as' to use
the traditional format instead.
For example, it disables the exception frame optimizations which
`as' normally does by default on `gcc' output.
File: as.info, Node: v, Next: W, Prev: traditional-format, Up: Invoking
2.15 Announce Version: `-v'
===========================
You can find out what version of as is running by including the option
`-v' (which you can also spell as `-version') on the command line.
File: as.info, Node: W, Next: Z, Prev: v, Up: Invoking
2.16 Control Warnings: `-W', `--warn', `--no-warn', `--fatal-warnings'
======================================================================
`as' should never give a warning or error message when assembling
compiler output. But programs written by people often cause `as' to
give a warning that a particular assumption was made. All such
warnings are directed to the standard error file.
If you use the `-W' and `--no-warn' options, no warnings are issued.
This only affects the warning messages: it does not change any
particular of how `as' assembles your file. Errors, which stop the
assembly, are still reported.
If you use the `--fatal-warnings' option, `as' considers files that
generate warnings to be in error.
You can switch these options off again by specifying `--warn', which
causes warnings to be output as usual.
File: as.info, Node: Z, Prev: W, Up: Invoking
2.17 Generate Object File in Spite of Errors: `-Z'
==================================================
After an error message, `as' normally produces no output. If for some
reason you are interested in object file output even after `as' gives
an error message on your program, use the `-Z' option. If there are
any errors, `as' continues anyways, and writes an object file after a
final warning message of the form `N errors, M warnings, generating bad
object file.'
File: as.info, Node: Syntax, Next: Sections, Prev: Invoking, Up: Top
3 Syntax
********
This chapter describes the machine-independent syntax allowed in a
source file. `as' syntax is similar to what many other assemblers use;
it is inspired by the BSD 4.2 assembler, except that `as' does not
assemble Vax bit-fields.
* Menu:
* Preprocessing:: Preprocessing
* Whitespace:: Whitespace
* Comments:: Comments
* Symbol Intro:: Symbols
* Statements:: Statements
* Constants:: Constants
File: as.info, Node: Preprocessing, Next: Whitespace, Up: Syntax
3.1 Preprocessing
=================
The `as' internal preprocessor:
* adjusts and removes extra whitespace. It leaves one space or tab
before the keywords on a line, and turns any other whitespace on
the line into a single space.
* removes all comments, replacing them with a single space, or an
appropriate number of newlines.
* converts character constants into the appropriate numeric values.
It does not do macro processing, include file handling, or anything
else you may get from your C compiler's preprocessor. You can do
include file processing with the `.include' directive (*note
`.include': Include.). You can use the GNU C compiler driver to get
other "CPP" style preprocessing by giving the input file a `.S' suffix.
*Note Options Controlling the Kind of Output: (gcc.info)Overall
Options.
Excess whitespace, comments, and character constants cannot be used
in the portions of the input text that are not preprocessed.
If the first line of an input file is `#NO_APP' or if you use the
`-f' option, whitespace and comments are not removed from the input
file. Within an input file, you can ask for whitespace and comment
removal in specific portions of the by putting a line that says `#APP'
before the text that may contain whitespace or comments, and putting a
line that says `#NO_APP' after this text. This feature is mainly
intend to support `asm' statements in compilers whose output is
otherwise free of comments and whitespace.
File: as.info, Node: Whitespace, Next: Comments, Prev: Preprocessing, Up: Syntax
3.2 Whitespace
==============
"Whitespace" is one or more blanks or tabs, in any order. Whitespace
is used to separate symbols, and to make programs neater for people to
read. Unless within character constants (*note Character Constants:
Characters.), any whitespace means the same as exactly one space.
File: as.info, Node: Comments, Next: Symbol Intro, Prev: Whitespace, Up: Syntax
3.3 Comments
============
There are two ways of rendering comments to `as'. In both cases the
comment is equivalent to one space.
Anything from `/*' through the next `*/' is a comment. This means
you may not nest these comments.
/*
The only way to include a newline ('\n') in a comment
is to use this sort of comment.
*/
/* This sort of comment does not nest. */
Anything from the "line comment" character to the next newline is
considered a comment and is ignored. The line comment character is `;'
on the ARC; `@' on the ARM; `;' for the H8/300 family; `;' for the HPPA;
`#' on the i386 and x86-64; `#' on the i960; `;' for the PDP-11; `;'
for picoJava; `#' for Motorola PowerPC; `!' for the Renesas / SuperH SH;
`!' on the SPARC; `#' on the ip2k; `#' on the m32c; `#' on the m32r;
`|' on the 680x0; `#' on the 68HC11 and 68HC12; `#' on the Vax; `;' for
the Z80; `!' for the Z8000; `#' on the V850; `#' for Xtensa systems;
see *Note Machine Dependencies::.
On some machines there are two different line comment characters.
One character only begins a comment if it is the first non-whitespace
character on a line, while the other always begins a comment.
The V850 assembler also supports a double dash as starting a comment
that extends to the end of the line.
`--';
To be compatible with past assemblers, lines that begin with `#'
have a special interpretation. Following the `#' should be an absolute
expression (*note Expressions::): the logical line number of the _next_
line. Then a string (*note Strings: Strings.) is allowed: if present
it is a new logical file name. The rest of the line, if any, should be
whitespace.
If the first non-whitespace characters on the line are not numeric,
the line is ignored. (Just like a comment.)
# This is an ordinary comment.
# 42-6 "new_file_name" # New logical file name
# This is logical line # 36.
This feature is deprecated, and may disappear from future versions
of `as'.
File: as.info, Node: Symbol Intro, Next: Statements, Prev: Comments, Up: Syntax
3.4 Symbols
===========
A "symbol" is one or more characters chosen from the set of all letters
(both upper and lower case), digits and the three characters `_.$'. On
most machines, you can also use `$' in symbol names; exceptions are
noted in *Note Machine Dependencies::. No symbol may begin with a
digit. Case is significant. There is no length limit: all characters
are significant. Symbols are delimited by characters not in that set,
or by the beginning of a file (since the source program must end with a
newline, the end of a file is not a possible symbol delimiter). *Note
Symbols::.
File: as.info, Node: Statements, Next: Constants, Prev: Symbol Intro, Up: Syntax
3.5 Statements
==============
A "statement" ends at a newline character (`\n') or line separator
character. (The line separator is usually `;', unless this conflicts
with the comment character; *note Machine Dependencies::.) The newline
or separator character is considered part of the preceding statement.
Newlines and separators within character constants are an exception:
they do not end statements.
It is an error to end any statement with end-of-file: the last
character of any input file should be a newline.
An empty statement is allowed, and may include whitespace. It is
ignored.
A statement begins with zero or more labels, optionally followed by a
key symbol which determines what kind of statement it is. The key
symbol determines the syntax of the rest of the statement. If the
symbol begins with a dot `.' then the statement is an assembler
directive: typically valid for any computer. If the symbol begins with
a letter the statement is an assembly language "instruction": it
assembles into a machine language instruction. Different versions of
`as' for different computers recognize different instructions. In
fact, the same symbol may represent a different instruction in a
different computer's assembly language.
A label is a symbol immediately followed by a colon (`:').
Whitespace before a label or after a colon is permitted, but you may not
have whitespace between a label's symbol and its colon. *Note Labels::.
For HPPA targets, labels need not be immediately followed by a
colon, but the definition of a label must begin in column zero. This
also implies that only one label may be defined on each line.
label: .directive followed by something
another_label: # This is an empty statement.
instruction operand_1, operand_2, ...
File: as.info, Node: Constants, Prev: Statements, Up: Syntax
3.6 Constants
=============
A constant is a number, written so that its value is known by
inspection, without knowing any context. Like this:
.byte 74, 0112, 092, 0x4A, 0X4a, 'J, '\J # All the same value.
.ascii "Ring the bell\7" # A string constant.
.octa 0x123456789abcdef0123456789ABCDEF0 # A bignum.
.float 0f-314159265358979323846264338327\
95028841971.693993751E-40 # - pi, a flonum.
* Menu:
* Characters:: Character Constants
* Numbers:: Number Constants
File: as.info, Node: Characters, Next: Numbers, Up: Constants
3.6.1 Character Constants
-------------------------
There are two kinds of character constants. A "character" stands for
one character in one byte and its value may be used in numeric
expressions. String constants (properly called string _literals_) are
potentially many bytes and their values may not be used in arithmetic
expressions.
* Menu:
* Strings:: Strings
* Chars:: Characters
File: as.info, Node: Strings, Next: Chars, Up: Characters
3.6.1.1 Strings
...............
A "string" is written between double-quotes. It may contain
double-quotes or null characters. The way to get special characters
into a string is to "escape" these characters: precede them with a
backslash `\' character. For example `\\' represents one backslash:
the first `\' is an escape which tells `as' to interpret the second
character literally as a backslash (which prevents `as' from
recognizing the second `\' as an escape character). The complete list
of escapes follows.
`\b'
Mnemonic for backspace; for ASCII this is octal code 010.
`\f'
Mnemonic for FormFeed; for ASCII this is octal code 014.
`\n'
Mnemonic for newline; for ASCII this is octal code 012.
`\r'
Mnemonic for carriage-Return; for ASCII this is octal code 015.
`\t'
Mnemonic for horizontal Tab; for ASCII this is octal code 011.
`\ DIGIT DIGIT DIGIT'
An octal character code. The numeric code is 3 octal digits. For
compatibility with other Unix systems, 8 and 9 are accepted as
digits: for example, `\008' has the value 010, and `\009' the
value 011.
`\`x' HEX-DIGITS...'
A hex character code. All trailing hex digits are combined.
Either upper or lower case `x' works.
`\\'
Represents one `\' character.
`\"'
Represents one `"' character. Needed in strings to represent this
character, because an unescaped `"' would end the string.
`\ ANYTHING-ELSE'
Any other character when escaped by `\' gives a warning, but
assembles as if the `\' was not present. The idea is that if you
used an escape sequence you clearly didn't want the literal
interpretation of the following character. However `as' has no
other interpretation, so `as' knows it is giving you the wrong
code and warns you of the fact.
Which characters are escapable, and what those escapes represent,
varies widely among assemblers. The current set is what we think the
BSD 4.2 assembler recognizes, and is a subset of what most C compilers
recognize. If you are in doubt, do not use an escape sequence.
File: as.info, Node: Chars, Prev: Strings, Up: Characters
3.6.1.2 Characters
..................
A single character may be written as a single quote immediately
followed by that character. The same escapes apply to characters as to
strings. So if you want to write the character backslash, you must
write `'\\' where the first `\' escapes the second `\'. As you can
see, the quote is an acute accent, not a grave accent. A newline
immediately following an acute accent is taken as a literal character
and does not count as the end of a statement. The value of a character
constant in a numeric expression is the machine's byte-wide code for
that character. `as' assumes your character code is ASCII: `'A' means
65, `'B' means 66, and so on.
File: as.info, Node: Numbers, Prev: Characters, Up: Constants
3.6.2 Number Constants
----------------------
`as' distinguishes three kinds of numbers according to how they are
stored in the target machine. _Integers_ are numbers that would fit
into an `int' in the C language. _Bignums_ are integers, but they are
stored in more than 32 bits. _Flonums_ are floating point numbers,
described below.
* Menu:
* Integers:: Integers
* Bignums:: Bignums
* Flonums:: Flonums
File: as.info, Node: Integers, Next: Bignums, Up: Numbers
3.6.2.1 Integers
................
A binary integer is `0b' or `0B' followed by zero or more of the binary
digits `01'.
An octal integer is `0' followed by zero or more of the octal digits
(`01234567').
A decimal integer starts with a non-zero digit followed by zero or
more digits (`0123456789').
A hexadecimal integer is `0x' or `0X' followed by one or more
hexadecimal digits chosen from `0123456789abcdefABCDEF'.
Integers have the usual values. To denote a negative integer, use
the prefix operator `-' discussed under expressions (*note Prefix
Operators: Prefix Ops.).
File: as.info, Node: Bignums, Next: Flonums, Prev: Integers, Up: Numbers
3.6.2.2 Bignums
...............
A "bignum" has the same syntax and semantics as an integer except that
the number (or its negative) takes more than 32 bits to represent in
binary. The distinction is made because in some places integers are
permitted while bignums are not.
File: as.info, Node: Flonums, Prev: Bignums, Up: Numbers
3.6.2.3 Flonums
...............
A "flonum" represents a floating point number. The translation is
indirect: a decimal floating point number from the text is converted by
`as' to a generic binary floating point number of more than sufficient
precision. This generic floating point number is converted to a
particular computer's floating point format (or formats) by a portion
of `as' specialized to that computer.
A flonum is written by writing (in order)
* The digit `0'. (`0' is optional on the HPPA.)
* A letter, to tell `as' the rest of the number is a flonum. `e' is
recommended. Case is not important.
On the H8/300, Renesas / SuperH SH, and AMD 29K architectures, the
letter must be one of the letters `DFPRSX' (in upper or lower
case).
On the ARC, the letter must be one of the letters `DFRS' (in upper
or lower case).
On the Intel 960 architecture, the letter must be one of the
letters `DFT' (in upper or lower case).
On the HPPA architecture, the letter must be `E' (upper case only).
* An optional sign: either `+' or `-'.
* An optional "integer part": zero or more decimal digits.
* An optional "fractional part": `.' followed by zero or more
decimal digits.
* An optional exponent, consisting of:
* An `E' or `e'.
* Optional sign: either `+' or `-'.
* One or more decimal digits.
At least one of the integer part or the fractional part must be
present. The floating point number has the usual base-10 value.
`as' does all processing using integers. Flonums are computed
independently of any floating point hardware in the computer running
`as'.
File: as.info, Node: Sections, Next: Symbols, Prev: Syntax, Up: Top
4 Sections and Relocation
*************************
* Menu:
* Secs Background:: Background
* Ld Sections:: Linker Sections
* As Sections:: Assembler Internal Sections
* Sub-Sections:: Sub-Sections
* bss:: bss Section
File: as.info, Node: Secs Background, Next: Ld Sections, Up: Sections
4.1 Background
==============
Roughly, a section is a range of addresses, with no gaps; all data "in"
those addresses is treated the same for some particular purpose. For
example there may be a "read only" section.
The linker `ld' reads many object files (partial programs) and
combines their contents to form a runnable program. When `as' emits an
object file, the partial program is assumed to start at address 0.
`ld' assigns the final addresses for the partial program, so that
different partial programs do not overlap. This is actually an
oversimplification, but it suffices to explain how `as' uses sections.
`ld' moves blocks of bytes of your program to their run-time
addresses. These blocks slide to their run-time addresses as rigid
units; their length does not change and neither does the order of bytes
within them. Such a rigid unit is called a _section_. Assigning
run-time addresses to sections is called "relocation". It includes the
task of adjusting mentions of object-file addresses so they refer to
the proper run-time addresses. For the H8/300, and for the Renesas /
SuperH SH, `as' pads sections if needed to ensure they end on a word
(sixteen bit) boundary.
An object file written by `as' has at least three sections, any of
which may be empty. These are named "text", "data" and "bss" sections.
When it generates COFF or ELF output, `as' can also generate
whatever other named sections you specify using the `.section'
directive (*note `.section': Section.). If you do not use any
directives that place output in the `.text' or `.data' sections, these
sections still exist, but are empty.
When `as' generates SOM or ELF output for the HPPA, `as' can also
generate whatever other named sections you specify using the `.space'
and `.subspace' directives. See `HP9000 Series 800 Assembly Language
Reference Manual' (HP 92432-90001) for details on the `.space' and
`.subspace' assembler directives.
Additionally, `as' uses different names for the standard text, data,
and bss sections when generating SOM output. Program text is placed
into the `$CODE$' section, data into `$DATA$', and BSS into `$BSS$'.
Within the object file, the text section starts at address `0', the
data section follows, and the bss section follows the data section.
When generating either SOM or ELF output files on the HPPA, the text
section starts at address `0', the data section at address `0x4000000',
and the bss section follows the data section.
To let `ld' know which data changes when the sections are relocated,
and how to change that data, `as' also writes to the object file
details of the relocation needed. To perform relocation `ld' must
know, each time an address in the object file is mentioned:
* Where in the object file is the beginning of this reference to an
address?
* How long (in bytes) is this reference?
* Which section does the address refer to? What is the numeric
value of
(ADDRESS) - (START-ADDRESS OF SECTION)?
* Is the reference to an address "Program-Counter relative"?
In fact, every address `as' ever uses is expressed as
(SECTION) + (OFFSET INTO SECTION)
Further, most expressions `as' computes have this section-relative
nature. (For some object formats, such as SOM for the HPPA, some
expressions are symbol-relative instead.)
In this manual we use the notation {SECNAME N} to mean "offset N
into section SECNAME."
Apart from text, data and bss sections you need to know about the
"absolute" section. When `ld' mixes partial programs, addresses in the
absolute section remain unchanged. For example, address `{absolute 0}'
is "relocated" to run-time address 0 by `ld'. Although the linker
never arranges two partial programs' data sections with overlapping
addresses after linking, _by definition_ their absolute sections must
overlap. Address `{absolute 239}' in one part of a program is always
the same address when the program is running as address `{absolute
239}' in any other part of the program.
The idea of sections is extended to the "undefined" section. Any
address whose section is unknown at assembly time is by definition
rendered {undefined U}--where U is filled in later. Since numbers are
always defined, the only way to generate an undefined address is to
mention an undefined symbol. A reference to a named common block would
be such a symbol: its value is unknown at assembly time so it has
section _undefined_.
By analogy the word _section_ is used to describe groups of sections
in the linked program. `ld' puts all partial programs' text sections
in contiguous addresses in the linked program. It is customary to
refer to the _text section_ of a program, meaning all the addresses of
all partial programs' text sections. Likewise for data and bss
sections.
Some sections are manipulated by `ld'; others are invented for use
of `as' and have no meaning except during assembly.
File: as.info, Node: Ld Sections, Next: As Sections, Prev: Secs Background, Up: Sections
4.2 Linker Sections
===================
`ld' deals with just four kinds of sections, summarized below.
*named sections*
*text section*
*data section*
These sections hold your program. `as' and `ld' treat them as
separate but equal sections. Anything you can say of one section
is true of another. When the program is running, however, it is
customary for the text section to be unalterable. The text
section is often shared among processes: it contains instructions,
constants and the like. The data section of a running program is
usually alterable: for example, C variables would be stored in the
data section.
*bss section*
This section contains zeroed bytes when your program begins
running. It is used to hold uninitialized variables or common
storage. The length of each partial program's bss section is
important, but because it starts out containing zeroed bytes there
is no need to store explicit zero bytes in the object file. The
bss section was invented to eliminate those explicit zeros from
object files.
*absolute section*
Address 0 of this section is always "relocated" to runtime address
0. This is useful if you want to refer to an address that `ld'
must not change when relocating. In this sense we speak of
absolute addresses being "unrelocatable": they do not change
during relocation.
*undefined section*
This "section" is a catch-all for address references to objects
not in the preceding sections.
An idealized example of three relocatable sections follows. The
example uses the traditional section names `.text' and `.data'. Memory
addresses are on the horizontal axis.
+-----+----+--+
partial program # 1: |ttttt|dddd|00|
+-----+----+--+
text data bss
seg. seg. seg.
+---+---+---+
partial program # 2: |TTT|DDD|000|
+---+---+---+
+--+---+-----+--+----+---+-----+~~
linked program: | |TTT|ttttt| |dddd|DDD|00000|
+--+---+-----+--+----+---+-----+~~
addresses: 0 ...
File: as.info, Node: As Sections, Next: Sub-Sections, Prev: Ld Sections, Up: Sections
4.3 Assembler Internal Sections
===============================
These sections are meant only for the internal use of `as'. They have
no meaning at run-time. You do not really need to know about these
sections for most purposes; but they can be mentioned in `as' warning
messages, so it might be helpful to have an idea of their meanings to
`as'. These sections are used to permit the value of every expression
in your assembly language program to be a section-relative address.
ASSEMBLER-INTERNAL-LOGIC-ERROR!
An internal assembler logic error has been found. This means
there is a bug in the assembler.
expr section
The assembler stores complex expression internally as combinations
of symbols. When it needs to represent an expression as a symbol,
it puts it in the expr section.
File: as.info, Node: Sub-Sections, Next: bss, Prev: As Sections, Up: Sections
4.4 Sub-Sections
================
Assembled bytes conventionally fall into two sections: text and data.
You may have separate groups of data in named sections that you want to
end up near to each other in the object file, even though they are not
contiguous in the assembler source. `as' allows you to use
"subsections" for this purpose. Within each section, there can be
numbered subsections with values from 0 to 8192. Objects assembled
into the same subsection go into the object file together with other
objects in the same subsection. For example, a compiler might want to
store constants in the text section, but might not want to have them
interspersed with the program being assembled. In this case, the
compiler could issue a `.text 0' before each section of code being
output, and a `.text 1' before each group of constants being output.
Subsections are optional. If you do not use subsections, everything
goes in subsection number zero.
Each subsection is zero-padded up to a multiple of four bytes.
(Subsections may be padded a different amount on different flavors of
`as'.)
Subsections appear in your object file in numeric order, lowest
numbered to highest. (All this to be compatible with other people's
assemblers.) The object file contains no representation of
subsections; `ld' and other programs that manipulate object files see
no trace of them. They just see all your text subsections as a text
section, and all your data subsections as a data section.
To specify which subsection you want subsequent statements assembled
into, use a numeric argument to specify it, in a `.text EXPRESSION' or
a `.data EXPRESSION' statement. When generating COFF output, you can
also use an extra subsection argument with arbitrary named sections:
`.section NAME, EXPRESSION'. When generating ELF output, you can also
use the `.subsection' directive (*note SubSection::) to specify a
subsection: `.subsection EXPRESSION'. EXPRESSION should be an absolute
expression. (*Note Expressions::.) If you just say `.text' then
`.text 0' is assumed. Likewise `.data' means `.data 0'. Assembly
begins in `text 0'. For instance:
.text 0 # The default subsection is text 0 anyway.
.ascii "This lives in the first text subsection. *"
.text 1
.ascii "But this lives in the second text subsection."
.data 0
.ascii "This lives in the data section,"
.ascii "in the first data subsection."
.text 0
.ascii "This lives in the first text section,"
.ascii "immediately following the asterisk (*)."
Each section has a "location counter" incremented by one for every
byte assembled into that section. Because subsections are merely a
convenience restricted to `as' there is no concept of a subsection
location counter. There is no way to directly manipulate a location
counter--but the `.align' directive changes it, and any label
definition captures its current value. The location counter of the
section where statements are being assembled is said to be the "active"
location counter.
File: as.info, Node: bss, Prev: Sub-Sections, Up: Sections
4.5 bss Section
===============
The bss section is used for local common variable storage. You may
allocate address space in the bss section, but you may not dictate data
to load into it before your program executes. When your program starts
running, all the contents of the bss section are zeroed bytes.
The `.lcomm' pseudo-op defines a symbol in the bss section; see
*Note `.lcomm': Lcomm.
The `.comm' pseudo-op may be used to declare a common symbol, which
is another form of uninitialized symbol; see *Note `.comm': Comm.
When assembling for a target which supports multiple sections, such
as ELF or COFF, you may switch into the `.bss' section and define
symbols as usual; see *Note `.section': Section. You may only assemble
zero values into the section. Typically the section will only contain
symbol definitions and `.skip' directives (*note `.skip': Skip.).
File: as.info, Node: Symbols, Next: Expressions, Prev: Sections, Up: Top
5 Symbols
*********
Symbols are a central concept: the programmer uses symbols to name
things, the linker uses symbols to link, and the debugger uses symbols
to debug.
_Warning:_ `as' does not place symbols in the object file in the
same order they were declared. This may break some debuggers.
* Menu:
* Labels:: Labels
* Setting Symbols:: Giving Symbols Other Values
* Symbol Names:: Symbol Names
* Dot:: The Special Dot Symbol
* Symbol Attributes:: Symbol Attributes
File: as.info, Node: Labels, Next: Setting Symbols, Up: Symbols
5.1 Labels
==========
A "label" is written as a symbol immediately followed by a colon `:'.
The symbol then represents the current value of the active location
counter, and is, for example, a suitable instruction operand. You are
warned if you use the same symbol to represent two different locations:
the first definition overrides any other definitions.
On the HPPA, the usual form for a label need not be immediately
followed by a colon, but instead must start in column zero. Only one
label may be defined on a single line. To work around this, the HPPA
version of `as' also provides a special directive `.label' for defining
labels more flexibly.
File: as.info, Node: Setting Symbols, Next: Symbol Names, Prev: Labels, Up: Symbols
5.2 Giving Symbols Other Values
===============================
A symbol can be given an arbitrary value by writing a symbol, followed
by an equals sign `=', followed by an expression (*note Expressions::).
This is equivalent to using the `.set' directive. *Note `.set': Set.
In the same way, using a double equals sign `='`=' here represents an
equivalent of the `.eqv' directive. *Note `.eqv': Eqv.
File: as.info, Node: Symbol Names, Next: Dot, Prev: Setting Symbols, Up: Symbols
5.3 Symbol Names
================
Symbol names begin with a letter or with one of `._'. On most
machines, you can also use `$' in symbol names; exceptions are noted in
*Note Machine Dependencies::. That character may be followed by any
string of digits, letters, dollar signs (unless otherwise noted in
*Note Machine Dependencies::), and underscores.
Case of letters is significant: `foo' is a different symbol name than
`Foo'.
Each symbol has exactly one name. Each name in an assembly language
program refers to exactly one symbol. You may use that symbol name any
number of times in a program.
Local Symbol Names
------------------
Local symbols help compilers and programmers use names temporarily.
They create symbols which are guaranteed to be unique over the entire
scope of the input source code and which can be referred to by a simple
notation. To define a local symbol, write a label of the form `N:'
(where N represents any positive integer). To refer to the most recent
previous definition of that symbol write `Nb', using the same number as
when you defined the label. To refer to the next definition of a local
label, write `Nf'-- The `b' stands for"backwards" and the `f' stands
for "forwards".
There is no restriction on how you can use these labels, and you can
reuse them too. So that it is possible to repeatedly define the same
local label (using the same number `N'), although you can only refer to
the most recently defined local label of that number (for a backwards
reference) or the next definition of a specific local label for a
forward reference. It is also worth noting that the first 10 local
labels (`0:'...`9:') are implemented in a slightly more efficient
manner than the others.
Here is an example:
1: branch 1f
2: branch 1b
1: branch 2f
2: branch 1b
Which is the equivalent of:
label_1: branch label_3
label_2: branch label_1
label_3: branch label_4
label_4: branch label_3
Local symbol names are only a notational device. They are
immediately transformed into more conventional symbol names before the
assembler uses them. The symbol names stored in the symbol table,
appearing in error messages and optionally emitted to the object file.
The names are constructed using these parts:
`L'
All local labels begin with `L'. Normally both `as' and `ld'
forget symbols that start with `L'. These labels are used for
symbols you are never intended to see. If you use the `-L' option
then `as' retains these symbols in the object file. If you also
instruct `ld' to retain these symbols, you may use them in
debugging.
`NUMBER'
This is the number that was used in the local label definition.
So if the label is written `55:' then the number is `55'.
`C-B'
This unusual character is included so you do not accidentally
invent a symbol of the same name. The character has ASCII value
of `\002' (control-B).
`_ordinal number_'
This is a serial number to keep the labels distinct. The first
definition of `0:' gets the number `1'. The 15th definition of
`0:' gets the number `15', and so on. Likewise the first
definition of `1:' gets the number `1' and its 15th defintion gets
`15' as well.
So for example, the first `1:' is named `L1C-B1', the 44th `3:' is
named `L3C-B44'.
Dollar Local Labels
-------------------
`as' also supports an even more local form of local labels called
dollar labels. These labels go out of scope (ie they become undefined)
as soon as a non-local label is defined. Thus they remain valid for
only a small region of the input source code. Normal local labels, by
contrast, remain in scope for the entire file, or until they are
redefined by another occurrence of the same local label.
Dollar labels are defined in exactly the same way as ordinary local
labels, except that instead of being terminated by a colon, they are
terminated by a dollar sign. eg `55$'.
They can also be distinguished from ordinary local labels by their
transformed name which uses ASCII character `\001' (control-A) as the
magic character to distinguish them from ordinary labels. Thus the 5th
defintion of `6$' is named `L6C-A5'.
File: as.info, Node: Dot, Next: Symbol Attributes, Prev: Symbol Names, Up: Symbols
5.4 The Special Dot Symbol
==========================
The special symbol `.' refers to the current address that `as' is
assembling into. Thus, the expression `melvin: .long .' defines
`melvin' to contain its own address. Assigning a value to `.' is
treated the same as a `.org' directive. Thus, the expression `.=.+4'
is the same as saying `.space 4'.
File: as.info, Node: Symbol Attributes, Prev: Dot, Up: Symbols
5.5 Symbol Attributes
=====================
Every symbol has, as well as its name, the attributes "Value" and
"Type". Depending on output format, symbols can also have auxiliary
attributes.
If you use a symbol without defining it, `as' assumes zero for all
these attributes, and probably won't warn you. This makes the symbol
an externally defined symbol, which is generally what you would want.
* Menu:
* Symbol Value:: Value
* Symbol Type:: Type
* a.out Symbols:: Symbol Attributes: `a.out'
* COFF Symbols:: Symbol Attributes for COFF
* SOM Symbols:: Symbol Attributes for SOM
File: as.info, Node: Symbol Value, Next: Symbol Type, Up: Symbol Attributes
5.5.1 Value
-----------
The value of a symbol is (usually) 32 bits. For a symbol which labels a
location in the text, data, bss or absolute sections the value is the
number of addresses from the start of that section to the label.
Naturally for text, data and bss sections the value of a symbol changes
as `ld' changes section base addresses during linking. Absolute
symbols' values do not change during linking: that is why they are
called absolute.
The value of an undefined symbol is treated in a special way. If it
is 0 then the symbol is not defined in this assembler source file, and
`ld' tries to determine its value from other files linked into the same
program. You make this kind of symbol simply by mentioning a symbol
name without defining it. A non-zero value represents a `.comm' common
declaration. The value is how much common storage to reserve, in bytes
(addresses). The symbol refers to the first address of the allocated
storage.
File: as.info, Node: Symbol Type, Next: a.out Symbols, Prev: Symbol Value, Up: Symbol Attributes
5.5.2 Type
----------
The type attribute of a symbol contains relocation (section)
information, any flag settings indicating that a symbol is external, and
(optionally), other information for linkers and debuggers. The exact
format depends on the object-code output format in use.
File: as.info, Node: a.out Symbols, Next: COFF Symbols, Prev: Symbol Type, Up: Symbol Attributes
5.5.3 Symbol Attributes: `a.out'
--------------------------------
* Menu:
* Symbol Desc:: Descriptor
* Symbol Other:: Other
File: as.info, Node: Symbol Desc, Next: Symbol Other, Up: a.out Symbols
5.5.3.1 Descriptor
..................
This is an arbitrary 16-bit value. You may establish a symbol's
descriptor value by using a `.desc' statement (*note `.desc': Desc.).
A descriptor value means nothing to `as'.
File: as.info, Node: Symbol Other, Prev: Symbol Desc, Up: a.out Symbols
5.5.3.2 Other
.............
This is an arbitrary 8-bit value. It means nothing to `as'.
File: as.info, Node: COFF Symbols, Next: SOM Symbols, Prev: a.out Symbols, Up: Symbol Attributes
5.5.4 Symbol Attributes for COFF
--------------------------------
The COFF format supports a multitude of auxiliary symbol attributes;
like the primary symbol attributes, they are set between `.def' and
`.endef' directives.
5.5.4.1 Primary Attributes
..........................
The symbol name is set with `.def'; the value and type, respectively,
with `.val' and `.type'.
5.5.4.2 Auxiliary Attributes
............................
The `as' directives `.dim', `.line', `.scl', `.size', `.tag', and
`.weak' can generate auxiliary symbol table information for COFF.
File: as.info, Node: SOM Symbols, Prev: COFF Symbols, Up: Symbol Attributes
5.5.5 Symbol Attributes for SOM
-------------------------------
The SOM format for the HPPA supports a multitude of symbol attributes
set with the `.EXPORT' and `.IMPORT' directives.
The attributes are described in `HP9000 Series 800 Assembly Language
Reference Manual' (HP 92432-90001) under the `IMPORT' and `EXPORT'
assembler directive documentation.
File: as.info, Node: Expressions, Next: Pseudo Ops, Prev: Symbols, Up: Top
6 Expressions
*************
An "expression" specifies an address or numeric value. Whitespace may
precede and/or follow an expression.
The result of an expression must be an absolute number, or else an
offset into a particular section. If an expression is not absolute,
and there is not enough information when `as' sees the expression to
know its section, a second pass over the source program might be
necessary to interpret the expression--but the second pass is currently
not implemented. `as' aborts with an error message in this situation.
* Menu:
* Empty Exprs:: Empty Expressions
* Integer Exprs:: Integer Expressions
File: as.info, Node: Empty Exprs, Next: Integer Exprs, Up: Expressions
6.1 Empty Expressions
=====================
An empty expression has no value: it is just whitespace or null.
Wherever an absolute expression is required, you may omit the
expression, and `as' assumes a value of (absolute) 0. This is
compatible with other assemblers.
File: as.info, Node: Integer Exprs, Prev: Empty Exprs, Up: Expressions
6.2 Integer Expressions
=======================
An "integer expression" is one or more _arguments_ delimited by
_operators_.
* Menu:
* Arguments:: Arguments
* Operators:: Operators
* Prefix Ops:: Prefix Operators
* Infix Ops:: Infix Operators
File: as.info, Node: Arguments, Next: Operators, Up: Integer Exprs
6.2.1 Arguments
---------------
"Arguments" are symbols, numbers or subexpressions. In other contexts
arguments are sometimes called "arithmetic operands". In this manual,
to avoid confusing them with the "instruction operands" of the machine
language, we use the term "argument" to refer to parts of expressions
only, reserving the word "operand" to refer only to machine instruction
operands.
Symbols are evaluated to yield {SECTION NNN} where SECTION is one of
text, data, bss, absolute, or undefined. NNN is a signed, 2's
complement 32 bit integer.
Numbers are usually integers.
A number can be a flonum or bignum. In this case, you are warned
that only the low order 32 bits are used, and `as' pretends these 32
bits are an integer. You may write integer-manipulating instructions
that act on exotic constants, compatible with other assemblers.
Subexpressions are a left parenthesis `(' followed by an integer
expression, followed by a right parenthesis `)'; or a prefix operator
followed by an argument.
File: as.info, Node: Operators, Next: Prefix Ops, Prev: Arguments, Up: Integer Exprs
6.2.2 Operators
---------------
"Operators" are arithmetic functions, like `+' or `%'. Prefix
operators are followed by an argument. Infix operators appear between
their arguments. Operators may be preceded and/or followed by
whitespace.
File: as.info, Node: Prefix Ops, Next: Infix Ops, Prev: Operators, Up: Integer Exprs
6.2.3 Prefix Operator
---------------------
`as' has the following "prefix operators". They each take one
argument, which must be absolute.
`-'
"Negation". Two's complement negation.
`~'
"Complementation". Bitwise not.
File: as.info, Node: Infix Ops, Prev: Prefix Ops, Up: Integer Exprs
6.2.4 Infix Operators
---------------------
"Infix operators" take two arguments, one on either side. Operators
have precedence, but operations with equal precedence are performed left
to right. Apart from `+' or `-', both arguments must be absolute, and
the result is absolute.
1. Highest Precedence
`*'
"Multiplication".
`/'
"Division". Truncation is the same as the C operator `/'
`%'
"Remainder".
`<<'
"Shift Left". Same as the C operator `<<'.
`>>'
"Shift Right". Same as the C operator `>>'.
2. Intermediate precedence
`|'
"Bitwise Inclusive Or".
`&'
"Bitwise And".
`^'
"Bitwise Exclusive Or".
`!'
"Bitwise Or Not".
3. Low Precedence
`+'
"Addition". If either argument is absolute, the result has
the section of the other argument. You may not add together
arguments from different sections.
`-'
"Subtraction". If the right argument is absolute, the result
has the section of the left argument. If both arguments are
in the same section, the result is absolute. You may not
subtract arguments from different sections.
`=='
"Is Equal To"
`<>'
`!='
"Is Not Equal To"
`<'
"Is Less Than"
`>'
"Is Greater Than"
`>='
"Is Greater Than Or Equal To"
`<='
"Is Less Than Or Equal To"
The comparison operators can be used as infix operators. A
true results has a value of -1 whereas a false result has a
value of 0. Note, these operators perform signed
comparisons.
4. Lowest Precedence
`&&'
"Logical And".
`||'
"Logical Or".
These two logical operations can be used to combine the
results of sub expressions. Note, unlike the comparison
operators a true result returns a value of 1 but a false
results does still return 0. Also note that the logical or
operator has a slightly lower precedence than logical and.
In short, it's only meaningful to add or subtract the _offsets_ in an
address; you can only have a defined section in one of the two
arguments.
File: as.info, Node: Pseudo Ops, Next: Machine Dependencies, Prev: Expressions, Up: Top
7 Assembler Directives
**********************
All assembler directives have names that begin with a period (`.').
The rest of the name is letters, usually in lower case.
This chapter discusses directives that are available regardless of
the target machine configuration for the GNU assembler. Some machine
configurations provide additional directives. *Note Machine
Dependencies::.
* Menu:
* Abort:: `.abort'
* ABORT:: `.ABORT'
* Align:: `.align ABS-EXPR , ABS-EXPR'
* Altmacro:: `.altmacro'
* Ascii:: `.ascii "STRING"'...
* Asciz:: `.asciz "STRING"'...
* Balign:: `.balign ABS-EXPR , ABS-EXPR'
* Byte:: `.byte EXPRESSIONS'
* Comm:: `.comm SYMBOL , LENGTH '
* CFI directives:: `.cfi_startproc', `.cfi_endproc', etc.
* Data:: `.data SUBSECTION'
* Def:: `.def NAME'
* Desc:: `.desc SYMBOL, ABS-EXPRESSION'
* Dim:: `.dim'
* Double:: `.double FLONUMS'
* Eject:: `.eject'
* Else:: `.else'
* Elseif:: `.elseif'
* End:: `.end'
* Endef:: `.endef'
* Endfunc:: `.endfunc'
* Endif:: `.endif'
* Equ:: `.equ SYMBOL, EXPRESSION'
* Equiv:: `.equiv SYMBOL, EXPRESSION'
* Eqv:: `.eqv SYMBOL, EXPRESSION'
* Err:: `.err'
* Error:: `.error STRING'
* Exitm:: `.exitm'
* Extern:: `.extern'
* Fail:: `.fail'
* File:: `.file STRING'
* Fill:: `.fill REPEAT , SIZE , VALUE'
* Float:: `.float FLONUMS'
* Func:: `.func'
* Global:: `.global SYMBOL', `.globl SYMBOL'
* Hidden:: `.hidden NAMES'
* hword:: `.hword EXPRESSIONS'
* Ident:: `.ident'
* If:: `.if ABSOLUTE EXPRESSION'
* Incbin:: `.incbin "FILE"[,SKIP[,COUNT]]'
* Include:: `.include "FILE"'
* Int:: `.int EXPRESSIONS'
* Internal:: `.internal NAMES'
* Irp:: `.irp SYMBOL,VALUES'...
* Irpc:: `.irpc SYMBOL,VALUES'...
* Lcomm:: `.lcomm SYMBOL , LENGTH'
* Lflags:: `.lflags'
* Line:: `.line LINE-NUMBER'
* Linkonce:: `.linkonce [TYPE]'
* List:: `.list'
* Ln:: `.ln LINE-NUMBER'
* LNS directives:: `.file', `.loc', etc.
* Long:: `.long EXPRESSIONS'
* Macro:: `.macro NAME ARGS'...
* MRI:: `.mri VAL'
* Noaltmacro:: `.noaltmacro'
* Nolist:: `.nolist'
* Octa:: `.octa BIGNUMS'
* Org:: `.org NEW-LC , FILL'
* P2align:: `.p2align ABS-EXPR , ABS-EXPR'
* PopSection:: `.popsection'
* Previous:: `.previous'
* Print:: `.print STRING'
* Protected:: `.protected NAMES'
* Psize:: `.psize LINES, COLUMNS'
* Purgem:: `.purgem NAME'
* PushSection:: `.pushsection NAME'
* Quad:: `.quad BIGNUMS'
* Rept:: `.rept COUNT'
* Sbttl:: `.sbttl "SUBHEADING"'
* Scl:: `.scl CLASS'
* Section:: `.section NAME'
* Set:: `.set SYMBOL, EXPRESSION'
* Short:: `.short EXPRESSIONS'
* Single:: `.single FLONUMS'
* Size:: `.size [NAME , EXPRESSION]'
* Skip:: `.skip SIZE , FILL'
* Sleb128:: `.sleb128 EXPRESSIONS'
* Space:: `.space SIZE , FILL'
* Stab:: `.stabd, .stabn, .stabs'
* String:: `.string "STR"'
* Struct:: `.struct EXPRESSION'
* SubSection:: `.subsection'
* Symver:: `.symver NAME,NAME2@NODENAME'
* Tag:: `.tag STRUCTNAME'
* Text:: `.text SUBSECTION'
* Title:: `.title "HEADING"'
* Type:: `.type <INT | NAME , TYPE DESCRIPTION>'
* Uleb128:: `.uleb128 EXPRESSIONS'
* Val:: `.val ADDR'
* Version:: `.version "STRING"'
* VTableEntry:: `.vtable_entry TABLE, OFFSET'
* VTableInherit:: `.vtable_inherit CHILD, PARENT'
* Warning:: `.warning STRING'
* Weak:: `.weak NAMES'
* Weakref:: `.weakref ALIAS, SYMBOL'
* Word:: `.word EXPRESSIONS'
* Deprecated:: Deprecated Directives
File: as.info, Node: Abort, Next: ABORT, Up: Pseudo Ops
7.1 `.abort'
============
This directive stops the assembly immediately. It is for compatibility
with other assemblers. The original idea was that the assembly
language source would be piped into the assembler. If the sender of
the source quit, it could use this directive tells `as' to quit also.
One day `.abort' will not be supported.
File: as.info, Node: ABORT, Next: Align, Prev: Abort, Up: Pseudo Ops
7.2 `.ABORT'
============
When producing COFF output, `as' accepts this directive as a synonym
for `.abort'.
File: as.info, Node: Align, Next: Altmacro, Prev: ABORT, Up: Pseudo Ops
7.3 `.align ABS-EXPR, ABS-EXPR, ABS-EXPR'
=========================================
Pad the location counter (in the current subsection) to a particular
storage boundary. The first expression (which must be absolute) is the
alignment required, as described below.
The second expression (also absolute) gives the fill value to be
stored in the padding bytes. It (and the comma) may be omitted. If it
is omitted, the padding bytes are normally zero. However, on some
systems, if the section is marked as containing code and the fill value
is omitted, the space is filled with no-op instructions.
The third expression is also absolute, and is also optional. If it
is present, it is the maximum number of bytes that should be skipped by
this alignment directive. If doing the alignment would require
skipping more bytes than the specified maximum, then the alignment is
not done at all. You can omit the fill value (the second argument)
entirely by simply using two commas after the required alignment; this
can be useful if you want the alignment to be filled with no-op
instructions when appropriate.
The way the required alignment is specified varies from system to
system. For the arc, hppa, i386 using ELF, i860, iq2000, m68k, or32,
s390, sparc, tic4x, tic80 and xtensa, the first expression is the
alignment request in bytes. For example `.align 8' advances the
location counter until it is a multiple of 8. If the location counter
is already a multiple of 8, no change is needed. For the tic54x, the
first expression is the alignment request in words.
For other systems, including the i386 using a.out format, and the
arm and strongarm, it is the number of low-order zero bits the location
counter must have after advancement. For example `.align 3' advances
the location counter until it a multiple of 8. If the location counter
is already a multiple of 8, no change is needed.
This inconsistency is due to the different behaviors of the various
native assemblers for these systems which GAS must emulate. GAS also
provides `.balign' and `.p2align' directives, described later, which
have a consistent behavior across all architectures (but are specific
to GAS).
File: as.info, Node: Ascii, Next: Asciz, Prev: Altmacro, Up: Pseudo Ops
7.4 `.ascii "STRING"'...
========================
`.ascii' expects zero or more string literals (*note Strings::)
separated by commas. It assembles each string (with no automatic
trailing zero byte) into consecutive addresses.
File: as.info, Node: Asciz, Next: Balign, Prev: Ascii, Up: Pseudo Ops
7.5 `.asciz "STRING"'...
========================
`.asciz' is just like `.ascii', but each string is followed by a zero
byte. The "z" in `.asciz' stands for "zero".
File: as.info, Node: Balign, Next: Byte, Prev: Asciz, Up: Pseudo Ops
7.6 `.balign[wl] ABS-EXPR, ABS-EXPR, ABS-EXPR'
==============================================
Pad the location counter (in the current subsection) to a particular
storage boundary. The first expression (which must be absolute) is the
alignment request in bytes. For example `.balign 8' advances the
location counter until it is a multiple of 8. If the location counter
is already a multiple of 8, no change is needed.
The second expression (also absolute) gives the fill value to be
stored in the padding bytes. It (and the comma) may be omitted. If it
is omitted, the padding bytes are normally zero. However, on some
systems, if the section is marked as containing code and the fill value
is omitted, the space is filled with no-op instructions.
The third expression is also absolute, and is also optional. If it
is present, it is the maximum number of bytes that should be skipped by
this alignment directive. If doing the alignment would require
skipping more bytes than the specified maximum, then the alignment is
not done at all. You can omit the fill value (the second argument)
entirely by simply using two commas after the required alignment; this
can be useful if you want the alignment to be filled with no-op
instructions when appropriate.
The `.balignw' and `.balignl' directives are variants of the
`.balign' directive. The `.balignw' directive treats the fill pattern
as a two byte word value. The `.balignl' directives treats the fill
pattern as a four byte longword value. For example, `.balignw
4,0x368d' will align to a multiple of 4. If it skips two bytes, they
will be filled in with the value 0x368d (the exact placement of the
bytes depends upon the endianness of the processor). If it skips 1 or
3 bytes, the fill value is undefined.
File: as.info, Node: Byte, Next: Comm, Prev: Balign, Up: Pseudo Ops
7.7 `.byte EXPRESSIONS'
=======================
`.byte' expects zero or more expressions, separated by commas. Each
expression is assembled into the next byte.
File: as.info, Node: Comm, Next: CFI directives, Prev: Byte, Up: Pseudo Ops
7.8 `.comm SYMBOL , LENGTH '
============================
`.comm' declares a common symbol named SYMBOL. When linking, a common
symbol in one object file may be merged with a defined or common symbol
of the same name in another object file. If `ld' does not see a
definition for the symbol-just one or more common symbols-then it will
allocate LENGTH bytes of uninitialized memory. LENGTH must be an
absolute expression. If `ld' sees multiple common symbols with the
same name, and they do not all have the same size, it will allocate
space using the largest size.
When using ELF, the `.comm' directive takes an optional third
argument. This is the desired alignment of the symbol, specified as a
byte boundary (for example, an alignment of 16 means that the least
significant 4 bits of the address should be zero). The alignment must
be an absolute expression, and it must be a power of two. If `ld'
allocates uninitialized memory for the common symbol, it will use the
alignment when placing the symbol. If no alignment is specified, `as'
will set the alignment to the largest power of two less than or equal
to the size of the symbol, up to a maximum of 16.
The syntax for `.comm' differs slightly on the HPPA. The syntax is
`SYMBOL .comm, LENGTH'; SYMBOL is optional.
File: as.info, Node: CFI directives, Next: Data, Prev: Comm, Up: Pseudo Ops
7.9 `.cfi_startproc'
====================
`.cfi_startproc' is used at the beginning of each function that should
have an entry in `.eh_frame'. It initializes some internal data
structures and emits architecture dependent initial CFI instructions.
Don't forget to close the function by `.cfi_endproc'.
7.10 `.cfi_endproc'
===================
`.cfi_endproc' is used at the end of a function where it closes its
unwind entry previously opened by `.cfi_startproc'. and emits it to
`.eh_frame'.
7.11 `.cfi_def_cfa REGISTER, OFFSET'
====================================
`.cfi_def_cfa' defines a rule for computing CFA as: take address from
REGISTER and add OFFSET to it.
7.12 `.cfi_def_cfa_register REGISTER'
=====================================
`.cfi_def_cfa_register' modifies a rule for computing CFA. From now on
REGISTER will be used instead of the old one. Offset remains the same.
7.13 `.cfi_def_cfa_offset OFFSET'
=================================
`.cfi_def_cfa_offset' modifies a rule for computing CFA. Register
remains the same, but OFFSET is new. Note that it is the absolute
offset that will be added to a defined register to compute CFA address.
7.14 `.cfi_adjust_cfa_offset OFFSET'
====================================
Same as `.cfi_def_cfa_offset' but OFFSET is a relative value that is
added/substracted from the previous offset.
7.15 `.cfi_offset REGISTER, OFFSET'
===================================
Previous value of REGISTER is saved at offset OFFSET from CFA.
7.16 `.cfi_rel_offset REGISTER, OFFSET'
=======================================
Previous value of REGISTER is saved at offset OFFSET from the current
CFA register. This is transformed to `.cfi_offset' using the known
displacement of the CFA register from the CFA. This is often easier to
use, because the number will match the code it's annotating.
7.17 `.cfi_signal_frame'
========================
Mark current function as signal trampoline.
7.18 `.cfi_window_save'
=======================
SPARC register window has been saved.
7.19 `.cfi_escape' EXPRESSION[, ...]
====================================
Allows the user to add arbitrary bytes to the unwind info. One might
use this to add OS-specific CFI opcodes, or generic CFI opcodes that
GAS does not yet support.
File: as.info, Node: LNS directives, Next: Long, Prev: Ln, Up: Pseudo Ops
7.20 `.file FILENO FILENAME'
============================
When emitting dwarf2 line number information `.file' assigns filenames
to the `.debug_line' file name table. The FILENO operand should be a
unique positive integer to use as the index of the entry in the table.
The FILENAME operand is a C string literal.
The detail of filename indicies is exposed to the user because the
filename table is shared with the `.debug_info' section of the dwarf2
debugging information, and thus the user must know the exact indicies
that table entries will have.
7.21 `.loc FILENO LINENO [COLUMN] [OPTIONS]'
============================================
The `.loc' directive will add row to the `.debug_line' line number
matrix corresponding to the immediately following assembly instruction.
The FILENO, LINENO, and optional COLUMN arguments will be applied to
the `.debug_line' state machine before the row is added.
The OPTIONS are a sequence of the following tokens in any order:
`basic_block'
This option will set the `basic_block' register in the
`.debug_line' state machine to `true'.
`prologue_end'
This option will set the `prologue_end' register in the
`.debug_line' state machine to `true'.
`epilogue_begin'
This option will set the `epilogue_begin' register in the
`.debug_line' state machine to `true'.
`is_stmt VALUE'
This option will set the `is_stmt' register in the `.debug_line'
state machine to `value', which must be either 0 or 1.
`isa VALUE'
This directive will set the `isa' register in the `.debug_line'
state machine to VALUE, which must be an unsigned integer.
7.22 `.loc_mark_blocks ENABLE'
==============================
The `.loc_mark_blocks' directive makes the assembler emit an entry to
the `.debug_line' line number matrix with the `basic_block' register in
the state machine set whenever a code label is seen. The ENABLE
argument should be either 1 or 0, to enable or disable this function
respectively.
File: as.info, Node: Data, Next: Def, Prev: CFI directives, Up: Pseudo Ops
7.23 `.data SUBSECTION'
=======================
`.data' tells `as' to assemble the following statements onto the end of
the data subsection numbered SUBSECTION (which is an absolute
expression). If SUBSECTION is omitted, it defaults to zero.
File: as.info, Node: Def, Next: Desc, Prev: Data, Up: Pseudo Ops
7.24 `.def NAME'
================
Begin defining debugging information for a symbol NAME; the definition
extends until the `.endef' directive is encountered.
File: as.info, Node: Desc, Next: Dim, Prev: Def, Up: Pseudo Ops
7.25 `.desc SYMBOL, ABS-EXPRESSION'
===================================
This directive sets the descriptor of the symbol (*note Symbol
Attributes::) to the low 16 bits of an absolute expression.
The `.desc' directive is not available when `as' is configured for
COFF output; it is only for `a.out' or `b.out' object format. For the
sake of compatibility, `as' accepts it, but produces no output, when
configured for COFF.
File: as.info, Node: Dim, Next: Double, Prev: Desc, Up: Pseudo Ops
7.26 `.dim'
===========
This directive is generated by compilers to include auxiliary debugging
information in the symbol table. It is only permitted inside
`.def'/`.endef' pairs.
File: as.info, Node: Double, Next: Eject, Prev: Dim, Up: Pseudo Ops
7.27 `.double FLONUMS'
======================
`.double' expects zero or more flonums, separated by commas. It
assembles floating point numbers. The exact kind of floating point
numbers emitted depends on how `as' is configured. *Note Machine
Dependencies::.
File: as.info, Node: Eject, Next: Else, Prev: Double, Up: Pseudo Ops
7.28 `.eject'
=============
Force a page break at this point, when generating assembly listings.
File: as.info, Node: Else, Next: Elseif, Prev: Eject, Up: Pseudo Ops
7.29 `.else'
============
`.else' is part of the `as' support for conditional assembly; *note
`.if': If. It marks the beginning of a section of code to be assembled
if the condition for the preceding `.if' was false.
File: as.info, Node: Elseif, Next: End, Prev: Else, Up: Pseudo Ops
7.30 `.elseif'
==============
`.elseif' is part of the `as' support for conditional assembly; *note
`.if': If. It is shorthand for beginning a new `.if' block that would
otherwise fill the entire `.else' section.
File: as.info, Node: End, Next: Endef, Prev: Elseif, Up: Pseudo Ops
7.31 `.end'
===========
`.end' marks the end of the assembly file. `as' does not process
anything in the file past the `.end' directive.
File: as.info, Node: Endef, Next: Endfunc, Prev: End, Up: Pseudo Ops
7.32 `.endef'
=============
This directive flags the end of a symbol definition begun with `.def'.
File: as.info, Node: Endfunc, Next: Endif, Prev: Endef, Up: Pseudo Ops
7.33 `.endfunc'
===============
`.endfunc' marks the end of a function specified with `.func'.
File: as.info, Node: Endif, Next: Equ, Prev: Endfunc, Up: Pseudo Ops
7.34 `.endif'
=============
`.endif' is part of the `as' support for conditional assembly; it marks
the end of a block of code that is only assembled conditionally. *Note
`.if': If.
File: as.info, Node: Equ, Next: Equiv, Prev: Endif, Up: Pseudo Ops
7.35 `.equ SYMBOL, EXPRESSION'
==============================
This directive sets the value of SYMBOL to EXPRESSION. It is
synonymous with `.set'; *note `.set': Set.
The syntax for `equ' on the HPPA is `SYMBOL .equ EXPRESSION'.
The syntax for `equ' on the Z80 is `SYMBOL equ EXPRESSION'. On the
Z80 it is an eror if SYMBOL is already defined, but the symbol is not
protected from later redefinition, compare *Note Equiv::.
File: as.info, Node: Equiv, Next: Eqv, Prev: Equ, Up: Pseudo Ops
7.36 `.equiv SYMBOL, EXPRESSION'
================================
The `.equiv' directive is like `.equ' and `.set', except that the
assembler will signal an error if SYMBOL is already defined. Note a
symbol which has been referenced but not actually defined is considered
to be undefined.
Except for the contents of the error message, this is roughly
equivalent to
.ifdef SYM
.err
.endif
.equ SYM,VAL
plus it protects the symbol from later redefinition.
File: as.info, Node: Eqv, Next: Err, Prev: Equiv, Up: Pseudo Ops
7.37 `.eqv SYMBOL, EXPRESSION'
==============================
The `.eqv' directive is like `.equiv', but no attempt is made to
evaluate the expression or any part of it immediately. Instead each
time the resulting symbol is used in an expression, a snapshot of its
current value is taken.
File: as.info, Node: Err, Next: Error, Prev: Eqv, Up: Pseudo Ops
7.38 `.err'
===========
If `as' assembles a `.err' directive, it will print an error message
and, unless the `-Z' option was used, it will not generate an object
file. This can be used to signal an error in conditionally compiled
code.
File: as.info, Node: Error, Next: Exitm, Prev: Err, Up: Pseudo Ops
7.39 `.error "STRING"'
======================
Similarly to `.err', this directive emits an error, but you can specify
a string that will be emitted as the error message. If you don't
specify the message, it defaults to `".error directive invoked in
source file"'. *Note Error and Warning Messages: Errors.
.error "This code has not been assembled and tested."
File: as.info, Node: Exitm, Next: Extern, Prev: Error, Up: Pseudo Ops
7.40 `.exitm'
=============
Exit early from the current macro definition. *Note Macro::.
File: as.info, Node: Extern, Next: Fail, Prev: Exitm, Up: Pseudo Ops
7.41 `.extern'
==============
`.extern' is accepted in the source program--for compatibility with
other assemblers--but it is ignored. `as' treats all undefined symbols
as external.
File: as.info, Node: Fail, Next: File, Prev: Extern, Up: Pseudo Ops
7.42 `.fail EXPRESSION'
=======================
Generates an error or a warning. If the value of the EXPRESSION is 500
or more, `as' will print a warning message. If the value is less than
500, `as' will print an error message. The message will include the
value of EXPRESSION. This can occasionally be useful inside complex
nested macros or conditional assembly.
File: as.info, Node: File, Next: Fill, Prev: Fail, Up: Pseudo Ops
7.43 `.file STRING'
===================
`.file' tells `as' that we are about to start a new logical file.
STRING is the new file name. In general, the filename is recognized
whether or not it is surrounded by quotes `"'; but if you wish to
specify an empty file name, you must give the quotes-`""'. This
statement may go away in future: it is only recognized to be compatible
with old `as' programs.
File: as.info, Node: Fill, Next: Float, Prev: File, Up: Pseudo Ops
7.44 `.fill REPEAT , SIZE , VALUE'
==================================
REPEAT, SIZE and VALUE are absolute expressions. This emits REPEAT
copies of SIZE bytes. REPEAT may be zero or more. SIZE may be zero or
more, but if it is more than 8, then it is deemed to have the value 8,
compatible with other people's assemblers. The contents of each REPEAT
bytes is taken from an 8-byte number. The highest order 4 bytes are
zero. The lowest order 4 bytes are VALUE rendered in the byte-order of
an integer on the computer `as' is assembling for. Each SIZE bytes in
a repetition is taken from the lowest order SIZE bytes of this number.
Again, this bizarre behavior is compatible with other people's
assemblers.
SIZE and VALUE are optional. If the second comma and VALUE are
absent, VALUE is assumed zero. If the first comma and following tokens
are absent, SIZE is assumed to be 1.
File: as.info, Node: Float, Next: Func, Prev: Fill, Up: Pseudo Ops
7.45 `.float FLONUMS'
=====================
This directive assembles zero or more flonums, separated by commas. It
has the same effect as `.single'. The exact kind of floating point
numbers emitted depends on how `as' is configured. *Note Machine
Dependencies::.
File: as.info, Node: Func, Next: Global, Prev: Float, Up: Pseudo Ops
7.46 `.func NAME[,LABEL]'
=========================
`.func' emits debugging information to denote function NAME, and is
ignored unless the file is assembled with debugging enabled. Only
`--gstabs[+]' is currently supported. LABEL is the entry point of the
function and if omitted NAME prepended with the `leading char' is used.
`leading char' is usually `_' or nothing, depending on the target. All
functions are currently defined to have `void' return type. The
function must be terminated with `.endfunc'.
File: as.info, Node: Global, Next: Hidden, Prev: Func, Up: Pseudo Ops
7.47 `.global SYMBOL', `.globl SYMBOL'
======================================
`.global' makes the symbol visible to `ld'. If you define SYMBOL in
your partial program, its value is made available to other partial
programs that are linked with it. Otherwise, SYMBOL takes its
attributes from a symbol of the same name from another file linked into
the same program.
Both spellings (`.globl' and `.global') are accepted, for
compatibility with other assemblers.
On the HPPA, `.global' is not always enough to make it accessible to
other partial programs. You may need the HPPA-only `.EXPORT' directive
as well. *Note HPPA Assembler Directives: HPPA Directives.
File: as.info, Node: Hidden, Next: hword, Prev: Global, Up: Pseudo Ops
7.48 `.hidden NAMES'
====================
This is one of the ELF visibility directives. The other two are
`.internal' (*note `.internal': Internal.) and `.protected' (*note
`.protected': Protected.).
This directive overrides the named symbols default visibility (which
is set by their binding: local, global or weak). The directive sets
the visibility to `hidden' which means that the symbols are not visible
to other components. Such symbols are always considered to be
`protected' as well.
File: as.info, Node: hword, Next: Ident, Prev: Hidden, Up: Pseudo Ops
7.49 `.hword EXPRESSIONS'
=========================
This expects zero or more EXPRESSIONS, and emits a 16 bit number for
each.
This directive is a synonym for `.short'; depending on the target
architecture, it may also be a synonym for `.word'.
File: as.info, Node: Ident, Next: If, Prev: hword, Up: Pseudo Ops
7.50 `.ident'
=============
This directive is used by some assemblers to place tags in object
files. The behavior of this directive varies depending on the target.
When using the a.out object file format, `as' simply accepts the
directive for source-file compatibility with existing assemblers, but
does not emit anything for it. When using COFF, comments are emitted
to the `.comment' or `.rdata' section, depending on the target. When
using ELF, comments are emitted to the `.comment' section.
File: as.info, Node: If, Next: Incbin, Prev: Ident, Up: Pseudo Ops
7.51 `.if ABSOLUTE EXPRESSION'
==============================
`.if' marks the beginning of a section of code which is only considered
part of the source program being assembled if the argument (which must
be an ABSOLUTE EXPRESSION) is non-zero. The end of the conditional
section of code must be marked by `.endif' (*note `.endif': Endif.);
optionally, you may include code for the alternative condition, flagged
by `.else' (*note `.else': Else.). If you have several conditions to
check, `.elseif' may be used to avoid nesting blocks if/else within
each subsequent `.else' block.
The following variants of `.if' are also supported:
`.ifdef SYMBOL'
Assembles the following section of code if the specified SYMBOL
has been defined. Note a symbol which has been referenced but not
yet defined is considered to be undefined.
`.ifb TEXT'
Assembles the following section of code if the operand is blank
(empty).
`.ifc STRING1,STRING2'
Assembles the following section of code if the two strings are the
same. The strings may be optionally quoted with single quotes.
If they are not quoted, the first string stops at the first comma,
and the second string stops at the end of the line. Strings which
contain whitespace should be quoted. The string comparison is
case sensitive.
`.ifeq ABSOLUTE EXPRESSION'
Assembles the following section of code if the argument is zero.
`.ifeqs STRING1,STRING2'
Another form of `.ifc'. The strings must be quoted using double
quotes.
`.ifge ABSOLUTE EXPRESSION'
Assembles the following section of code if the argument is greater
than or equal to zero.
`.ifgt ABSOLUTE EXPRESSION'
Assembles the following section of code if the argument is greater
than zero.
`.ifle ABSOLUTE EXPRESSION'
Assembles the following section of code if the argument is less
than or equal to zero.
`.iflt ABSOLUTE EXPRESSION'
Assembles the following section of code if the argument is less
than zero.
`.ifnb TEXT'
Like `.ifb', but the sense of the test is reversed: this assembles
the following section of code if the operand is non-blank
(non-empty).
`.ifnc STRING1,STRING2.'
Like `.ifc', but the sense of the test is reversed: this assembles
the following section of code if the two strings are not the same.
`.ifndef SYMBOL'
`.ifnotdef SYMBOL'
Assembles the following section of code if the specified SYMBOL
has not been defined. Both spelling variants are equivalent.
Note a symbol which has been referenced but not yet defined is
considered to be undefined.
`.ifne ABSOLUTE EXPRESSION'
Assembles the following section of code if the argument is not
equal to zero (in other words, this is equivalent to `.if').
`.ifnes STRING1,STRING2'
Like `.ifeqs', but the sense of the test is reversed: this
assembles the following section of code if the two strings are not
the same.
File: as.info, Node: Incbin, Next: Include, Prev: If, Up: Pseudo Ops
7.52 `.incbin "FILE"[,SKIP[,COUNT]]'
====================================
The `incbin' directive includes FILE verbatim at the current location.
You can control the search paths used with the `-I' command-line option
(*note Command-Line Options: Invoking.). Quotation marks are required
around FILE.
The SKIP argument skips a number of bytes from the start of the
FILE. The COUNT argument indicates the maximum number of bytes to
read. Note that the data is not aligned in any way, so it is the user's
responsibility to make sure that proper alignment is provided both
before and after the `incbin' directive.
File: as.info, Node: Include, Next: Int, Prev: Incbin, Up: Pseudo Ops
7.53 `.include "FILE"'
======================
This directive provides a way to include supporting files at specified
points in your source program. The code from FILE is assembled as if
it followed the point of the `.include'; when the end of the included
file is reached, assembly of the original file continues. You can
control the search paths used with the `-I' command-line option (*note
Command-Line Options: Invoking.). Quotation marks are required around
FILE.
File: as.info, Node: Int, Next: Internal, Prev: Include, Up: Pseudo Ops
7.54 `.int EXPRESSIONS'
=======================
Expect zero or more EXPRESSIONS, of any section, separated by commas.
For each expression, emit a number that, at run time, is the value of
that expression. The byte order and bit size of the number depends on
what kind of target the assembly is for.
File: as.info, Node: Internal, Next: Irp, Prev: Int, Up: Pseudo Ops
7.55 `.internal NAMES'
======================
This is one of the ELF visibility directives. The other two are
`.hidden' (*note `.hidden': Hidden.) and `.protected' (*note
`.protected': Protected.).
This directive overrides the named symbols default visibility (which
is set by their binding: local, global or weak). The directive sets
the visibility to `internal' which means that the symbols are
considered to be `hidden' (i.e., not visible to other components), and
that some extra, processor specific processing must also be performed
upon the symbols as well.
File: as.info, Node: Irp, Next: Irpc, Prev: Internal, Up: Pseudo Ops
7.56 `.irp SYMBOL,VALUES'...
============================
Evaluate a sequence of statements assigning different values to SYMBOL.
The sequence of statements starts at the `.irp' directive, and is
terminated by an `.endr' directive. For each VALUE, SYMBOL is set to
VALUE, and the sequence of statements is assembled. If no VALUE is
listed, the sequence of statements is assembled once, with SYMBOL set
to the null string. To refer to SYMBOL within the sequence of
statements, use \SYMBOL.
For example, assembling
.irp param,1,2,3
move d\param,sp@-
.endr
is equivalent to assembling
move d1,sp@-
move d2,sp@-
move d3,sp@-
For some caveats with the spelling of SYMBOL, see also the discussion
at *Note Macro::.
File: as.info, Node: Irpc, Next: Lcomm, Prev: Irp, Up: Pseudo Ops
7.57 `.irpc SYMBOL,VALUES'...
=============================
Evaluate a sequence of statements assigning different values to SYMBOL.
The sequence of statements starts at the `.irpc' directive, and is
terminated by an `.endr' directive. For each character in VALUE,
SYMBOL is set to the character, and the sequence of statements is
assembled. If no VALUE is listed, the sequence of statements is
assembled once, with SYMBOL set to the null string. To refer to SYMBOL
within the sequence of statements, use \SYMBOL.
For example, assembling
.irpc param,123
move d\param,sp@-
.endr
is equivalent to assembling
move d1,sp@-
move d2,sp@-
move d3,sp@-
For some caveats with the spelling of SYMBOL, see also the discussion
at *Note Macro::.
File: as.info, Node: Lcomm, Next: Lflags, Prev: Irpc, Up: Pseudo Ops
7.58 `.lcomm SYMBOL , LENGTH'
=============================
Reserve LENGTH (an absolute expression) bytes for a local common
denoted by SYMBOL. The section and value of SYMBOL are those of the
new local common. The addresses are allocated in the bss section, so
that at run-time the bytes start off zeroed. SYMBOL is not declared
global (*note `.global': Global.), so is normally not visible to `ld'.
Some targets permit a third argument to be used with `.lcomm'. This
argument specifies the desired alignment of the symbol in the bss
section.
The syntax for `.lcomm' differs slightly on the HPPA. The syntax is
`SYMBOL .lcomm, LENGTH'; SYMBOL is optional.
File: as.info, Node: Lflags, Next: Line, Prev: Lcomm, Up: Pseudo Ops
7.59 `.lflags'
==============
`as' accepts this directive, for compatibility with other assemblers,
but ignores it.
File: as.info, Node: Line, Next: Linkonce, Prev: Lflags, Up: Pseudo Ops
7.60 `.line LINE-NUMBER'
========================
Change the logical line number. LINE-NUMBER must be an absolute
expression. The next line has that logical line number. Therefore any
other statements on the current line (after a statement separator
character) are reported as on logical line number LINE-NUMBER - 1. One
day `as' will no longer support this directive: it is recognized only
for compatibility with existing assembler programs.
Even though this is a directive associated with the `a.out' or
`b.out' object-code formats, `as' still recognizes it when producing
COFF output, and treats `.line' as though it were the COFF `.ln' _if_
it is found outside a `.def'/`.endef' pair.
Inside a `.def', `.line' is, instead, one of the directives used by
compilers to generate auxiliary symbol information for debugging.
File: as.info, Node: Linkonce, Next: List, Prev: Line, Up: Pseudo Ops
7.61 `.linkonce [TYPE]'
=======================
Mark the current section so that the linker only includes a single copy
of it. This may be used to include the same section in several
different object files, but ensure that the linker will only include it
once in the final output file. The `.linkonce' pseudo-op must be used
for each instance of the section. Duplicate sections are detected
based on the section name, so it should be unique.
This directive is only supported by a few object file formats; as of
this writing, the only object file format which supports it is the
Portable Executable format used on Windows NT.
The TYPE argument is optional. If specified, it must be one of the
following strings. For example:
.linkonce same_size
Not all types may be supported on all object file formats.
`discard'
Silently discard duplicate sections. This is the default.
`one_only'
Warn if there are duplicate sections, but still keep only one copy.
`same_size'
Warn if any of the duplicates have different sizes.
`same_contents'
Warn if any of the duplicates do not have exactly the same
contents.
File: as.info, Node: Ln, Next: LNS directives, Prev: List, Up: Pseudo Ops
7.62 `.ln LINE-NUMBER'
======================
`.ln' is a synonym for `.line'.
File: as.info, Node: MRI, Next: Noaltmacro, Prev: Macro, Up: Pseudo Ops
7.63 `.mri VAL'
===============
If VAL is non-zero, this tells `as' to enter MRI mode. If VAL is zero,
this tells `as' to exit MRI mode. This change affects code assembled
until the next `.mri' directive, or until the end of the file. *Note
MRI mode: M.
File: as.info, Node: List, Next: Ln, Prev: Linkonce, Up: Pseudo Ops
7.64 `.list'
============
Control (in conjunction with the `.nolist' directive) whether or not
assembly listings are generated. These two directives maintain an
internal counter (which is zero initially). `.list' increments the
counter, and `.nolist' decrements it. Assembly listings are generated
whenever the counter is greater than zero.
By default, listings are disabled. When you enable them (with the
`-a' command line option; *note Command-Line Options: Invoking.), the
initial value of the listing counter is one.
File: as.info, Node: Long, Next: Macro, Prev: LNS directives, Up: Pseudo Ops
7.65 `.long EXPRESSIONS'
========================
`.long' is the same as `.int', *note `.int': Int.
File: as.info, Node: Macro, Next: MRI, Prev: Long, Up: Pseudo Ops
7.66 `.macro'
=============
The commands `.macro' and `.endm' allow you to define macros that
generate assembly output. For example, this definition specifies a
macro `sum' that puts a sequence of numbers into memory:
.macro sum from=0, to=5
.long \from
.if \to-\from
sum "(\from+1)",\to
.endif
.endm
With that definition, `SUM 0,5' is equivalent to this assembly input:
.long 0
.long 1
.long 2
.long 3
.long 4
.long 5
`.macro MACNAME'
`.macro MACNAME MACARGS ...'
Begin the definition of a macro called MACNAME. If your macro
definition requires arguments, specify their names after the macro
name, separated by commas or spaces. You can qualify the macro
argument to indicate whether all invocations must specify a
non-blank value (through `:`req''), or whether it takes all of the
remaining arguments (through `:`vararg''). You can supply a
default value for any macro argument by following the name with
`=DEFLT'. You cannot define two macros with the same MACNAME
unless it has been subject to the `.purgem' directive (*Note
Purgem::.) between the two definitions. For example, these are
all valid `.macro' statements:
`.macro comm'
Begin the definition of a macro called `comm', which takes no
arguments.
`.macro plus1 p, p1'
`.macro plus1 p p1'
Either statement begins the definition of a macro called
`plus1', which takes two arguments; within the macro
definition, write `\p' or `\p1' to evaluate the arguments.
`.macro reserve_str p1=0 p2'
Begin the definition of a macro called `reserve_str', with two
arguments. The first argument has a default value, but not
the second. After the definition is complete, you can call
the macro either as `reserve_str A,B' (with `\p1' evaluating
to A and `\p2' evaluating to B), or as `reserve_str ,B' (with
`\p1' evaluating as the default, in this case `0', and `\p2'
evaluating to B).
`.macro m p1:req, p2=0, p3:vararg'
Begin the definition of a macro called `m', with at least three
arguments. The first argument must always have a value specified,
but not the second, which instead has a default value. The third
formal will get assigned all remaining arguments specified at
invocation time.
When you call a macro, you can specify the argument values either
by position, or by keyword. For example, `sum 9,17' is equivalent
to `sum to=17, from=9'.
Note that since each of the MACARGS can be an identifier exactly
as any other one permitted by the target architecture, there may be
occasional problems if the target hand-crafts special meanings to
certain characters when they occur in a special position. For
example, if colon (`:') is generally permitted to be part of a
symbol name, but the architecture specific code special-cases it
when occuring as the final character of a symbol (to denote a
label), then the macro parameter replacement code will have no way
of knowing that and consider the whole construct (including the
colon) an identifier, and check only this identifier for being the
subject to parameter substitution. In this example, besides the
potential of just separating identifier and colon by white space,
using alternate macro syntax (*Note Altmacro::.) and ampersand
(`&') as the character to separate literal text from macro
parameters (or macro parameters from one another) would provide a
way to achieve the same effect:
.altmacro
.macro label l
l&:
.endm
This applies identically to the identifiers used in `.irp' (*Note
Irp::.) and `.irpc' (*Note Irpc::.).
`.endm'
Mark the end of a macro definition.
`.exitm'
Exit early from the current macro definition.
`\@'
`as' maintains a counter of how many macros it has executed in
this pseudo-variable; you can copy that number to your output with
`\@', but _only within a macro definition_.
`LOCAL NAME [ , ... ]'
_Warning: `LOCAL' is only available if you select "alternate macro
syntax" with `--alternate' or `.altmacro'._ *Note `.altmacro':
Altmacro.
File: as.info, Node: Altmacro, Next: Ascii, Prev: Align, Up: Pseudo Ops
7.67 `.altmacro'
================
Enable alternate macro mode, enabling:
`LOCAL NAME [ , ... ]'
One additional directive, `LOCAL', is available. It is used to
generate a string replacement for each of the NAME arguments, and
replace any instances of NAME in each macro expansion. The
replacement string is unique in the assembly, and different for
each separate macro expansion. `LOCAL' allows you to write macros
that define symbols, without fear of conflict between separate
macro expansions.
`String delimiters'
You can write strings delimited in these other ways besides
`"STRING"':
`'STRING''
You can delimit strings with single-quote charaters.
`<STRING>'
You can delimit strings with matching angle brackets.
`single-character string escape'
To include any single character literally in a string (even if the
character would otherwise have some special meaning), you can
prefix the character with `!' (an exclamation mark). For example,
you can write `<4.3 !> 5.4!!>' to get the literal text `4.3 >
5.4!'.
`Expression results as strings'
You can write `%EXPR' to evaluate the expression EXPR and use the
result as a string.
File: as.info, Node: Noaltmacro, Next: Nolist, Prev: MRI, Up: Pseudo Ops
7.68 `.noaltmacro'
==================
Disable alternate macro mode. *Note Altmacro::
File: as.info, Node: Nolist, Next: Octa, Prev: Noaltmacro, Up: Pseudo Ops
7.69 `.nolist'
==============
Control (in conjunction with the `.list' directive) whether or not
assembly listings are generated. These two directives maintain an
internal counter (which is zero initially). `.list' increments the
counter, and `.nolist' decrements it. Assembly listings are generated
whenever the counter is greater than zero.
File: as.info, Node: Octa, Next: Org, Prev: Nolist, Up: Pseudo Ops
7.70 `.octa BIGNUMS'
====================
This directive expects zero or more bignums, separated by commas. For
each bignum, it emits a 16-byte integer.
The term "octa" comes from contexts in which a "word" is two bytes;
hence _octa_-word for 16 bytes.
File: as.info, Node: Org, Next: P2align, Prev: Octa, Up: Pseudo Ops
7.71 `.org NEW-LC , FILL'
=========================
Advance the location counter of the current section to NEW-LC. NEW-LC
is either an absolute expression or an expression with the same section
as the current subsection. That is, you can't use `.org' to cross
sections: if NEW-LC has the wrong section, the `.org' directive is
ignored. To be compatible with former assemblers, if the section of
NEW-LC is absolute, `as' issues a warning, then pretends the section of
NEW-LC is the same as the current subsection.
`.org' may only increase the location counter, or leave it
unchanged; you cannot use `.org' to move the location counter backwards.
Because `as' tries to assemble programs in one pass, NEW-LC may not
be undefined. If you really detest this restriction we eagerly await a
chance to share your improved assembler.
Beware that the origin is relative to the start of the section, not
to the start of the subsection. This is compatible with other people's
assemblers.
When the location counter (of the current subsection) is advanced,
the intervening bytes are filled with FILL which should be an absolute
expression. If the comma and FILL are omitted, FILL defaults to zero.
File: as.info, Node: P2align, Next: PopSection, Prev: Org, Up: Pseudo Ops
7.72 `.p2align[wl] ABS-EXPR, ABS-EXPR, ABS-EXPR'
================================================
Pad the location counter (in the current subsection) to a particular
storage boundary. The first expression (which must be absolute) is the
number of low-order zero bits the location counter must have after
advancement. For example `.p2align 3' advances the location counter
until it a multiple of 8. If the location counter is already a
multiple of 8, no change is needed.
The second expression (also absolute) gives the fill value to be
stored in the padding bytes. It (and the comma) may be omitted. If it
is omitted, the padding bytes are normally zero. However, on some
systems, if the section is marked as containing code and the fill value
is omitted, the space is filled with no-op instructions.
The third expression is also absolute, and is also optional. If it
is present, it is the maximum number of bytes that should be skipped by
this alignment directive. If doing the alignment would require
skipping more bytes than the specified maximum, then the alignment is
not done at all. You can omit the fill value (the second argument)
entirely by simply using two commas after the required alignment; this
can be useful if you want the alignment to be filled with no-op
instructions when appropriate.
The `.p2alignw' and `.p2alignl' directives are variants of the
`.p2align' directive. The `.p2alignw' directive treats the fill
pattern as a two byte word value. The `.p2alignl' directives treats the
fill pattern as a four byte longword value. For example, `.p2alignw
2,0x368d' will align to a multiple of 4. If it skips two bytes, they
will be filled in with the value 0x368d (the exact placement of the
bytes depends upon the endianness of the processor). If it skips 1 or
3 bytes, the fill value is undefined.
File: as.info, Node: Previous, Next: Print, Prev: PopSection, Up: Pseudo Ops
7.73 `.previous'
================
This is one of the ELF section stack manipulation directives. The
others are `.section' (*note Section::), `.subsection' (*note
SubSection::), `.pushsection' (*note PushSection::), and `.popsection'
(*note PopSection::).
This directive swaps the current section (and subsection) with most
recently referenced section (and subsection) prior to this one.
Multiple `.previous' directives in a row will flip between two sections
(and their subsections).
In terms of the section stack, this directive swaps the current
section with the top section on the section stack.
File: as.info, Node: PopSection, Next: Previous, Prev: P2align, Up: Pseudo Ops
7.74 `.popsection'
==================
This is one of the ELF section stack manipulation directives. The
others are `.section' (*note Section::), `.subsection' (*note
SubSection::), `.pushsection' (*note PushSection::), and `.previous'
(*note Previous::).
This directive replaces the current section (and subsection) with
the top section (and subsection) on the section stack. This section is
popped off the stack.
File: as.info, Node: Print, Next: Protected, Prev: Previous, Up: Pseudo Ops
7.75 `.print STRING'
====================
`as' will print STRING on the standard output during assembly. You
must put STRING in double quotes.
File: as.info, Node: Protected, Next: Psize, Prev: Print, Up: Pseudo Ops
7.76 `.protected NAMES'
=======================
This is one of the ELF visibility directives. The other two are
`.hidden' (*note Hidden::) and `.internal' (*note Internal::).
This directive overrides the named symbols default visibility (which
is set by their binding: local, global or weak). The directive sets
the visibility to `protected' which means that any references to the
symbols from within the components that defines them must be resolved
to the definition in that component, even if a definition in another
component would normally preempt this.
File: as.info, Node: Psize, Next: Purgem, Prev: Protected, Up: Pseudo Ops
7.77 `.psize LINES , COLUMNS'
=============================
Use this directive to declare the number of lines--and, optionally, the
number of columns--to use for each page, when generating listings.
If you do not use `.psize', listings use a default line-count of 60.
You may omit the comma and COLUMNS specification; the default width is
200 columns.
`as' generates formfeeds whenever the specified number of lines is
exceeded (or whenever you explicitly request one, using `.eject').
If you specify LINES as `0', no formfeeds are generated save those
explicitly specified with `.eject'.
File: as.info, Node: Purgem, Next: PushSection, Prev: Psize, Up: Pseudo Ops
7.78 `.purgem NAME'
===================
Undefine the macro NAME, so that later uses of the string will not be
expanded. *Note Macro::.
File: as.info, Node: PushSection, Next: Quad, Prev: Purgem, Up: Pseudo Ops
7.79 `.pushsection NAME , SUBSECTION'
=====================================
This is one of the ELF section stack manipulation directives. The
others are `.section' (*note Section::), `.subsection' (*note
SubSection::), `.popsection' (*note PopSection::), and `.previous'
(*note Previous::).
This directive pushes the current section (and subsection) onto the
top of the section stack, and then replaces the current section and
subsection with `name' and `subsection'.
File: as.info, Node: Quad, Next: Rept, Prev: PushSection, Up: Pseudo Ops
7.80 `.quad BIGNUMS'
====================
`.quad' expects zero or more bignums, separated by commas. For each
bignum, it emits an 8-byte integer. If the bignum won't fit in 8
bytes, it prints a warning message; and just takes the lowest order 8
bytes of the bignum.
The term "quad" comes from contexts in which a "word" is two bytes;
hence _quad_-word for 8 bytes.
File: as.info, Node: Rept, Next: Sbttl, Prev: Quad, Up: Pseudo Ops
7.81 `.rept COUNT'
==================
Repeat the sequence of lines between the `.rept' directive and the next
`.endr' directive COUNT times.
For example, assembling
.rept 3
.long 0
.endr
is equivalent to assembling
.long 0
.long 0
.long 0
File: as.info, Node: Sbttl, Next: Scl, Prev: Rept, Up: Pseudo Ops
7.82 `.sbttl "SUBHEADING"'
==========================
Use SUBHEADING as the title (third line, immediately after the title
line) when generating assembly listings.
This directive affects subsequent pages, as well as the current page
if it appears within ten lines of the top of a page.
File: as.info, Node: Scl, Next: Section, Prev: Sbttl, Up: Pseudo Ops
7.83 `.scl CLASS'
=================
Set the storage-class value for a symbol. This directive may only be
used inside a `.def'/`.endef' pair. Storage class may flag whether a
symbol is static or external, or it may record further symbolic
debugging information.
File: as.info, Node: Section, Next: Set, Prev: Scl, Up: Pseudo Ops
7.84 `.section NAME'
====================
Use the `.section' directive to assemble the following code into a
section named NAME.
This directive is only supported for targets that actually support
arbitrarily named sections; on `a.out' targets, for example, it is not
accepted, even with a standard `a.out' section name.
COFF Version
------------
For COFF targets, the `.section' directive is used in one of the
following ways:
.section NAME[, "FLAGS"]
.section NAME[, SUBSEGMENT]
If the optional argument is quoted, it is taken as flags to use for
the section. Each flag is a single character. The following flags are
recognized:
`b'
bss section (uninitialized data)
`n'
section is not loaded
`w'
writable section
`d'
data section
`r'
read-only section
`x'
executable section
`s'
shared section (meaningful for PE targets)
`a'
ignored. (For compatibility with the ELF version)
If no flags are specified, the default flags depend upon the section
name. If the section name is not recognized, the default will be for
the section to be loaded and writable. Note the `n' and `w' flags
remove attributes from the section, rather than adding them, so if they
are used on their own it will be as if no flags had been specified at
all.
If the optional argument to the `.section' directive is not quoted,
it is taken as a subsegment number (*note Sub-Sections::).
ELF Version
-----------
This is one of the ELF section stack manipulation directives. The
others are `.subsection' (*note SubSection::), `.pushsection' (*note
PushSection::), `.popsection' (*note PopSection::), and `.previous'
(*note Previous::).
For ELF targets, the `.section' directive is used like this:
.section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]]
The optional FLAGS argument is a quoted string which may contain any
combination of the following characters:
`a'
section is allocatable
`w'
section is writable
`x'
section is executable
`M'
section is mergeable
`S'
section contains zero terminated strings
`G'
section is a member of a section group
`T'
section is used for thread-local-storage
The optional TYPE argument may contain one of the following
constants:
`@progbits'
section contains data
`@nobits'
section does not contain data (i.e., section only occupies space)
`@note'
section contains data which is used by things other than the
program
`@init_array'
section contains an array of pointers to init functions
`@fini_array'
section contains an array of pointers to finish functions
`@preinit_array'
section contains an array of pointers to pre-init functions
Many targets only support the first three section types.
Note on targets where the `@' character is the start of a comment (eg
ARM) then another character is used instead. For example the ARM port
uses the `%' character.
If FLAGS contains the `M' symbol then the TYPE argument must be
specified as well as an extra argument - ENTSIZE - like this:
.section NAME , "FLAGS"M, @TYPE, ENTSIZE
Sections with the `M' flag but not `S' flag must contain fixed size
constants, each ENTSIZE octets long. Sections with both `M' and `S'
must contain zero terminated strings where each character is ENTSIZE
bytes long. The linker may remove duplicates within sections with the
same name, same entity size and same flags. ENTSIZE must be an
absolute expression.
If FLAGS contains the `G' symbol then the TYPE argument must be
present along with an additional field like this:
.section NAME , "FLAGS"G, @TYPE, GROUPNAME[, LINKAGE]
The GROUPNAME field specifies the name of the section group to which
this particular section belongs. The optional linkage field can
contain:
`comdat'
indicates that only one copy of this section should be retained
`.gnu.linkonce'
an alias for comdat
Note - if both the M and G flags are present then the fields for the
Merge flag should come first, like this:
.section NAME , "FLAGS"MG, @TYPE, ENTSIZE, GROUPNAME[, LINKAGE]
If no flags are specified, the default flags depend upon the section
name. If the section name is not recognized, the default will be for
the section to have none of the above flags: it will not be allocated
in memory, nor writable, nor executable. The section will contain data.
For ELF targets, the assembler supports another type of `.section'
directive for compatibility with the Solaris assembler:
.section "NAME"[, FLAGS...]
Note that the section name is quoted. There may be a sequence of
comma separated flags:
`#alloc'
section is allocatable
`#write'
section is writable
`#execinstr'
section is executable
`#tls'
section is used for thread local storage
This directive replaces the current section and subsection. See the
contents of the gas testsuite directory `gas/testsuite/gas/elf' for
some examples of how this directive and the other section stack
directives work.
File: as.info, Node: Set, Next: Short, Prev: Section, Up: Pseudo Ops
7.85 `.set SYMBOL, EXPRESSION'
==============================
Set the value of SYMBOL to EXPRESSION. This changes SYMBOL's value and
type to conform to EXPRESSION. If SYMBOL was flagged as external, it
remains flagged (*note Symbol Attributes::).
You may `.set' a symbol many times in the same assembly.
If you `.set' a global symbol, the value stored in the object file
is the last value stored into it.
The syntax for `set' on the HPPA is `SYMBOL .set EXPRESSION'.
On Z80 `set' is a real instruction, use `SYMBOL defl EXPRESSION'
instead.
File: as.info, Node: Short, Next: Single, Prev: Set, Up: Pseudo Ops
7.86 `.short EXPRESSIONS'
=========================
`.short' is normally the same as `.word'. *Note `.word': Word.
In some configurations, however, `.short' and `.word' generate
numbers of different lengths; *note Machine Dependencies::.
File: as.info, Node: Single, Next: Size, Prev: Short, Up: Pseudo Ops
7.87 `.single FLONUMS'
======================
This directive assembles zero or more flonums, separated by commas. It
has the same effect as `.float'. The exact kind of floating point
numbers emitted depends on how `as' is configured. *Note Machine
Dependencies::.
File: as.info, Node: Size, Next: Skip, Prev: Single, Up: Pseudo Ops
7.88 `.size'
============
This directive is used to set the size associated with a symbol.
COFF Version
------------
For COFF targets, the `.size' directive is only permitted inside
`.def'/`.endef' pairs. It is used like this:
.size EXPRESSION
ELF Version
-----------
For ELF targets, the `.size' directive is used like this:
.size NAME , EXPRESSION
This directive sets the size associated with a symbol NAME. The
size in bytes is computed from EXPRESSION which can make use of label
arithmetic. This directive is typically used to set the size of
function symbols.
File: as.info, Node: Sleb128, Next: Space, Prev: Skip, Up: Pseudo Ops
7.89 `.sleb128 EXPRESSIONS'
===========================
SLEB128 stands for "signed little endian base 128." This is a compact,
variable length representation of numbers used by the DWARF symbolic
debugging format. *Note `.uleb128': Uleb128.
File: as.info, Node: Skip, Next: Sleb128, Prev: Size, Up: Pseudo Ops
7.90 `.skip SIZE , FILL'
========================
This directive emits SIZE bytes, each of value FILL. Both SIZE and
FILL are absolute expressions. If the comma and FILL are omitted, FILL
is assumed to be zero. This is the same as `.space'.
File: as.info, Node: Space, Next: Stab, Prev: Sleb128, Up: Pseudo Ops
7.91 `.space SIZE , FILL'
=========================
This directive emits SIZE bytes, each of value FILL. Both SIZE and
FILL are absolute expressions. If the comma and FILL are omitted, FILL
is assumed to be zero. This is the same as `.skip'.
_Warning:_ `.space' has a completely different meaning for HPPA
targets; use `.block' as a substitute. See `HP9000 Series 800
Assembly Language Reference Manual' (HP 92432-90001) for the
meaning of the `.space' directive. *Note HPPA Assembler
Directives: HPPA Directives, for a summary.
File: as.info, Node: Stab, Next: String, Prev: Space, Up: Pseudo Ops
7.92 `.stabd, .stabn, .stabs'
=============================
There are three directives that begin `.stab'. All emit symbols (*note
Symbols::), for use by symbolic debuggers. The symbols are not entered
in the `as' hash table: they cannot be referenced elsewhere in the
source file. Up to five fields are required:
STRING
This is the symbol's name. It may contain any character except
`\000', so is more general than ordinary symbol names. Some
debuggers used to code arbitrarily complex structures into symbol
names using this field.
TYPE
An absolute expression. The symbol's type is set to the low 8
bits of this expression. Any bit pattern is permitted, but `ld'
and debuggers choke on silly bit patterns.
OTHER
An absolute expression. The symbol's "other" attribute is set to
the low 8 bits of this expression.
DESC
An absolute expression. The symbol's descriptor is set to the low
16 bits of this expression.
VALUE
An absolute expression which becomes the symbol's value.
If a warning is detected while reading a `.stabd', `.stabn', or
`.stabs' statement, the symbol has probably already been created; you
get a half-formed symbol in your object file. This is compatible with
earlier assemblers!
`.stabd TYPE , OTHER , DESC'
The "name" of the symbol generated is not even an empty string.
It is a null pointer, for compatibility. Older assemblers used a
null pointer so they didn't waste space in object files with empty
strings.
The symbol's value is set to the location counter, relocatably.
When your program is linked, the value of this symbol is the
address of the location counter when the `.stabd' was assembled.
`.stabn TYPE , OTHER , DESC , VALUE'
The name of the symbol is set to the empty string `""'.
`.stabs STRING , TYPE , OTHER , DESC , VALUE'
All five fields are specified.
File: as.info, Node: String, Next: Struct, Prev: Stab, Up: Pseudo Ops
7.93 `.string' "STR"
====================
Copy the characters in STR to the object file. You may specify more
than one string to copy, separated by commas. Unless otherwise
specified for a particular machine, the assembler marks the end of each
string with a 0 byte. You can use any of the escape sequences
described in *Note Strings: Strings.
File: as.info, Node: Struct, Next: SubSection, Prev: String, Up: Pseudo Ops
7.94 `.struct EXPRESSION'
=========================
Switch to the absolute section, and set the section offset to
EXPRESSION, which must be an absolute expression. You might use this
as follows:
.struct 0
field1:
.struct field1 + 4
field2:
.struct field2 + 4
field3:
This would define the symbol `field1' to have the value 0, the symbol
`field2' to have the value 4, and the symbol `field3' to have the value
8. Assembly would be left in the absolute section, and you would need
to use a `.section' directive of some sort to change to some other
section before further assembly.
File: as.info, Node: SubSection, Next: Symver, Prev: Struct, Up: Pseudo Ops
7.95 `.subsection NAME'
=======================
This is one of the ELF section stack manipulation directives. The
others are `.section' (*note Section::), `.pushsection' (*note
PushSection::), `.popsection' (*note PopSection::), and `.previous'
(*note Previous::).
This directive replaces the current subsection with `name'. The
current section is not changed. The replaced subsection is put onto
the section stack in place of the then current top of stack subsection.
File: as.info, Node: Symver, Next: Tag, Prev: SubSection, Up: Pseudo Ops
7.96 `.symver'
==============
Use the `.symver' directive to bind symbols to specific version nodes
within a source file. This is only supported on ELF platforms, and is
typically used when assembling files to be linked into a shared library.
There are cases where it may make sense to use this in objects to be
bound into an application itself so as to override a versioned symbol
from a shared library.
For ELF targets, the `.symver' directive can be used like this:
.symver NAME, NAME2@NODENAME
If the symbol NAME is defined within the file being assembled, the
`.symver' directive effectively creates a symbol alias with the name
NAME2@NODENAME, and in fact the main reason that we just don't try and
create a regular alias is that the @ character isn't permitted in
symbol names. The NAME2 part of the name is the actual name of the
symbol by which it will be externally referenced. The name NAME itself
is merely a name of convenience that is used so that it is possible to
have definitions for multiple versions of a function within a single
source file, and so that the compiler can unambiguously know which
version of a function is being mentioned. The NODENAME portion of the
alias should be the name of a node specified in the version script
supplied to the linker when building a shared library. If you are
attempting to override a versioned symbol from a shared library, then
NODENAME should correspond to the nodename of the symbol you are trying
to override.
If the symbol NAME is not defined within the file being assembled,
all references to NAME will be changed to NAME2@NODENAME. If no
reference to NAME is made, NAME2@NODENAME will be removed from the
symbol table.
Another usage of the `.symver' directive is:
.symver NAME, NAME2@@NODENAME
In this case, the symbol NAME must exist and be defined within the
file being assembled. It is similar to NAME2@NODENAME. The difference
is NAME2@@NODENAME will also be used to resolve references to NAME2 by
the linker.
The third usage of the `.symver' directive is:
.symver NAME, NAME2@@@NODENAME
When NAME is not defined within the file being assembled, it is
treated as NAME2@NODENAME. When NAME is defined within the file being
assembled, the symbol name, NAME, will be changed to NAME2@@NODENAME.
File: as.info, Node: Tag, Next: Text, Prev: Symver, Up: Pseudo Ops
7.97 `.tag STRUCTNAME'
======================
This directive is generated by compilers to include auxiliary debugging
information in the symbol table. It is only permitted inside
`.def'/`.endef' pairs. Tags are used to link structure definitions in
the symbol table with instances of those structures.
File: as.info, Node: Text, Next: Title, Prev: Tag, Up: Pseudo Ops
7.98 `.text SUBSECTION'
=======================
Tells `as' to assemble the following statements onto the end of the
text subsection numbered SUBSECTION, which is an absolute expression.
If SUBSECTION is omitted, subsection number zero is used.
File: as.info, Node: Title, Next: Type, Prev: Text, Up: Pseudo Ops
7.99 `.title "HEADING"'
=======================
Use HEADING as the title (second line, immediately after the source
file name and pagenumber) when generating assembly listings.
This directive affects subsequent pages, as well as the current page
if it appears within ten lines of the top of a page.
File: as.info, Node: Type, Next: Uleb128, Prev: Title, Up: Pseudo Ops
7.100 `.type'
=============
This directive is used to set the type of a symbol.
COFF Version
------------
For COFF targets, this directive is permitted only within
`.def'/`.endef' pairs. It is used like this:
.type INT
This records the integer INT as the type attribute of a symbol table
entry.
ELF Version
-----------
For ELF targets, the `.type' directive is used like this:
.type NAME , TYPE DESCRIPTION
This sets the type of symbol NAME to be either a function symbol or
an object symbol. There are five different syntaxes supported for the
TYPE DESCRIPTION field, in order to provide compatibility with various
other assemblers. The syntaxes supported are:
.type <name>,#function
.type <name>,#object
.type <name>,@function
.type <name>,@object
.type <name>,%function
.type <name>,%object
.type <name>,"function"
.type <name>,"object"
.type <name> STT_FUNCTION
.type <name> STT_OBJECT
File: as.info, Node: Uleb128, Next: Val, Prev: Type, Up: Pseudo Ops
7.101 `.uleb128 EXPRESSIONS'
============================
ULEB128 stands for "unsigned little endian base 128." This is a
compact, variable length representation of numbers used by the DWARF
symbolic debugging format. *Note `.sleb128': Sleb128.
File: as.info, Node: Val, Next: Version, Prev: Uleb128, Up: Pseudo Ops
7.102 `.val ADDR'
=================
This directive, permitted only within `.def'/`.endef' pairs, records
the address ADDR as the value attribute of a symbol table entry.
File: as.info, Node: Version, Next: VTableEntry, Prev: Val, Up: Pseudo Ops
7.103 `.version "STRING"'
=========================
This directive creates a `.note' section and places into it an ELF
formatted note of type NT_VERSION. The note's name is set to `string'.
File: as.info, Node: VTableEntry, Next: VTableInherit, Prev: Version, Up: Pseudo Ops
7.104 `.vtable_entry TABLE, OFFSET'
===================================
This directive finds or creates a symbol `table' and creates a
`VTABLE_ENTRY' relocation for it with an addend of `offset'.
File: as.info, Node: VTableInherit, Next: Warning, Prev: VTableEntry, Up: Pseudo Ops
7.105 `.vtable_inherit CHILD, PARENT'
=====================================
This directive finds the symbol `child' and finds or creates the symbol
`parent' and then creates a `VTABLE_INHERIT' relocation for the parent
whose addend is the value of the child symbol. As a special case the
parent name of `0' is treated as refering the `*ABS*' section.
File: as.info, Node: Warning, Next: Weak, Prev: VTableInherit, Up: Pseudo Ops
7.106 `.warning "STRING"'
=========================
Similar to the directive `.error' (*note `.error "STRING"': Error.),
but just emits a warning.
File: as.info, Node: Weak, Next: Weakref, Prev: Warning, Up: Pseudo Ops
7.107 `.weak NAMES'
===================
This directive sets the weak attribute on the comma separated list of
symbol `names'. If the symbols do not already exist, they will be
created.
On COFF targets other than PE, weak symbols are a GNU extension.
This directive sets the weak attribute on the comma separated list of
symbol `names'. If the symbols do not already exist, they will be
created.
On the PE target, weak symbols are supported natively as weak
aliases. When a weak symbol is created that is not an alias, GAS
creates an alternate symbol to hold the default value.
File: as.info, Node: Weakref, Next: Word, Prev: Weak, Up: Pseudo Ops
7.108 `.weakref ALIAS, TARGET'
==============================
This directive creates an alias to the target symbol that enables the
symbol to be referenced with weak-symbol semantics, but without
actually making it weak. If direct references or definitions of the
symbol are present, then the symbol will not be weak, but if all
references to it are through weak references, the symbol will be marked
as weak in the symbol table.
The effect is equivalent to moving all references to the alias to a
separate assembly source file, renaming the alias to the symbol in it,
declaring the symbol as weak there, and running a reloadable link to
merge the object files resulting from the assembly of the new source
file and the old source file that had the references to the alias
removed.
The alias itself never makes to the symbol table, and is entirely
handled within the assembler.
File: as.info, Node: Word, Next: Deprecated, Prev: Weakref, Up: Pseudo Ops
7.109 `.word EXPRESSIONS'
=========================
This directive expects zero or more EXPRESSIONS, of any section,
separated by commas.
The size of the number emitted, and its byte order, depend on what
target computer the assembly is for.
_Warning: Special Treatment to support Compilers_
Machines with a 32-bit address space, but that do less than 32-bit
addressing, require the following special treatment. If the machine of
interest to you does 32-bit addressing (or doesn't require it; *note
Machine Dependencies::), you can ignore this issue.
In order to assemble compiler output into something that works, `as'
occasionally does strange things to `.word' directives. Directives of
the form `.word sym1-sym2' are often emitted by compilers as part of
jump tables. Therefore, when `as' assembles a directive of the form
`.word sym1-sym2', and the difference between `sym1' and `sym2' does
not fit in 16 bits, `as' creates a "secondary jump table", immediately
before the next label. This secondary jump table is preceded by a
short-jump to the first byte after the secondary table. This
short-jump prevents the flow of control from accidentally falling into
the new table. Inside the table is a long-jump to `sym2'. The
original `.word' contains `sym1' minus the address of the long-jump to
`sym2'.
If there were several occurrences of `.word sym1-sym2' before the
secondary jump table, all of them are adjusted. If there was a `.word
sym3-sym4', that also did not fit in sixteen bits, a long-jump to
`sym4' is included in the secondary jump table, and the `.word'
directives are adjusted to contain `sym3' minus the address of the
long-jump to `sym4'; and so on, for as many entries in the original
jump table as necessary.
File: as.info, Node: Deprecated, Prev: Word, Up: Pseudo Ops
7.110 Deprecated Directives
===========================
One day these directives won't work. They are included for
compatibility with older assemblers.
.abort
.line
File: as.info, Node: Machine Dependencies, Next: Reporting Bugs, Prev: Pseudo Ops, Up: Top
8 Machine Dependent Features
****************************
The machine instruction sets are (almost by definition) different on
each machine where `as' runs. Floating point representations vary as
well, and `as' often supports a few additional directives or
command-line options for compatibility with other assemblers on a
particular platform. Finally, some versions of `as' support special
pseudo-instructions for branch optimization.
This chapter discusses most of these differences, though it does not
include details on any machine's instruction set. For details on that
subject, see the hardware manufacturer's manual.
* Menu:
* Alpha-Dependent:: Alpha Dependent Features
* ARC-Dependent:: ARC Dependent Features
* ARM-Dependent:: ARM Dependent Features
* BFIN-Dependent:: BFIN Dependent Features
* CRIS-Dependent:: CRIS Dependent Features
* D10V-Dependent:: D10V Dependent Features
* D30V-Dependent:: D30V Dependent Features
* H8/300-Dependent:: Renesas H8/300 Dependent Features
* HPPA-Dependent:: HPPA Dependent Features
* ESA/390-Dependent:: IBM ESA/390 Dependent Features
* i386-Dependent:: Intel 80386 and AMD x86-64 Dependent Features
* i860-Dependent:: Intel 80860 Dependent Features
* i960-Dependent:: Intel 80960 Dependent Features
* IA-64-Dependent:: Intel IA-64 Dependent Features
* IP2K-Dependent:: IP2K Dependent Features
* M32C-Dependent:: M32C Dependent Features
* M32R-Dependent:: M32R Dependent Features
* M68K-Dependent:: M680x0 Dependent Features
* M68HC11-Dependent:: M68HC11 and 68HC12 Dependent Features
* MIPS-Dependent:: MIPS Dependent Features
* MMIX-Dependent:: MMIX Dependent Features
* MSP430-Dependent:: MSP430 Dependent Features
* SH-Dependent:: Renesas / SuperH SH Dependent Features
* SH64-Dependent:: SuperH SH64 Dependent Features
* PDP-11-Dependent:: PDP-11 Dependent Features
* PJ-Dependent:: picoJava Dependent Features
* PPC-Dependent:: PowerPC Dependent Features
* Sparc-Dependent:: SPARC Dependent Features
* TIC54X-Dependent:: TI TMS320C54x Dependent Features
* V850-Dependent:: V850 Dependent Features
* Xtensa-Dependent:: Xtensa Dependent Features
* Z80-Dependent:: Z80 Dependent Features
* Z8000-Dependent:: Z8000 Dependent Features
* Vax-Dependent:: VAX Dependent Features
File: as.info, Node: Alpha-Dependent, Next: ARC-Dependent, Up: Machine Dependencies
8.1 Alpha Dependent Features
============================
* Menu:
* Alpha Notes:: Notes
* Alpha Options:: Options
* Alpha Syntax:: Syntax
* Alpha Floating Point:: Floating Point
* Alpha Directives:: Alpha Machine Directives
* Alpha Opcodes:: Opcodes
File: as.info, Node: Alpha Notes, Next: Alpha Options, Up: Alpha-Dependent
8.1.1 Notes
-----------
The documentation here is primarily for the ELF object format. `as'
also supports the ECOFF and EVAX formats, but features specific to
these formats are not yet documented.
File: as.info, Node: Alpha Options, Next: Alpha Syntax, Prev: Alpha Notes, Up: Alpha-Dependent
8.1.2 Options
-------------
`-mCPU'
This option specifies the target processor. If an attempt is made
to assemble an instruction which will not execute on the target
processor, the assembler may either expand the instruction as a
macro or issue an error message. This option is equivalent to the
`.arch' directive.
The following processor names are recognized: `21064', `21064a',
`21066', `21068', `21164', `21164a', `21164pc', `21264', `21264a',
`21264b', `ev4', `ev5', `lca45', `ev5', `ev56', `pca56', `ev6',
`ev67', `ev68'. The special name `all' may be used to allow the
assembler to accept instructions valid for any Alpha processor.
In order to support existing practice in OSF/1 with respect to
`.arch', and existing practice within `MILO' (the Linux ARC
bootloader), the numbered processor names (e.g. 21064) enable the
processor-specific PALcode instructions, while the
"electro-vlasic" names (e.g. `ev4') do not.
`-mdebug'
`-no-mdebug'
Enables or disables the generation of `.mdebug' encapsulation for
stabs directives and procedure descriptors. The default is to
automatically enable `.mdebug' when the first stabs directive is
seen.
`-relax'
This option forces all relocations to be put into the object file,
instead of saving space and resolving some relocations at assembly
time. Note that this option does not propagate all symbol
arithmetic into the object file, because not all symbol arithmetic
can be represented. However, the option can still be useful in
specific applications.
`-g'
This option is used when the compiler generates debug information.
When `gcc' is using `mips-tfile' to generate debug information
for ECOFF, local labels must be passed through to the object file.
Otherwise this option has no effect.
`-GSIZE'
A local common symbol larger than SIZE is placed in `.bss', while
smaller symbols are placed in `.sbss'.
`-F'
`-32addr'
These options are ignored for backward compatibility.
File: as.info, Node: Alpha Syntax, Next: Alpha Floating Point, Prev: Alpha Options, Up: Alpha-Dependent
8.1.3 Syntax
------------
The assembler syntax closely follow the Alpha Reference Manual;
assembler directives and general syntax closely follow the OSF/1 and
OpenVMS syntax, with a few differences for ELF.
* Menu:
* Alpha-Chars:: Special Characters
* Alpha-Regs:: Register Names
* Alpha-Relocs:: Relocations
File: as.info, Node: Alpha-Chars, Next: Alpha-Regs, Up: Alpha Syntax
8.1.3.1 Special Characters
..........................
`#' is the line comment character.
`;' can be used instead of a newline to separate statements.
File: as.info, Node: Alpha-Regs, Next: Alpha-Relocs, Prev: Alpha-Chars, Up: Alpha Syntax
8.1.3.2 Register Names
......................
The 32 integer registers are referred to as `$N' or `$rN'. In
addition, registers 15, 28, 29, and 30 may be referred to by the
symbols `$fp', `$at', `$gp', and `$sp' respectively.
The 32 floating-point registers are referred to as `$fN'.
File: as.info, Node: Alpha-Relocs, Prev: Alpha-Regs, Up: Alpha Syntax
8.1.3.3 Relocations
...................
Some of these relocations are available for ECOFF, but mostly only for
ELF. They are modeled after the relocation format introduced in
Digital Unix 4.0, but there are additions.
The format is `!TAG' or `!TAG!NUMBER' where TAG is the name of the
relocation. In some cases NUMBER is used to relate specific
instructions.
The relocation is placed at the end of the instruction like so:
ldah $0,a($29) !gprelhigh
lda $0,a($0) !gprellow
ldq $1,b($29) !literal!100
ldl $2,0($1) !lituse_base!100
`!literal'
`!literal!N'
Used with an `ldq' instruction to load the address of a symbol
from the GOT.
A sequence number N is optional, and if present is used to pair
`lituse' relocations with this `literal' relocation. The `lituse'
relocations are used by the linker to optimize the code based on
the final location of the symbol.
Note that these optimizations are dependent on the data flow of the
program. Therefore, if _any_ `lituse' is paired with a `literal'
relocation, then _all_ uses of the register set by the `literal'
instruction must also be marked with `lituse' relocations. This
is because the original `literal' instruction may be deleted or
transformed into another instruction.
Also note that there may be a one-to-many relationship between
`literal' and `lituse', but not a many-to-one. That is, if there
are two code paths that load up the same address and feed the
value to a single use, then the use may not use a `lituse'
relocation.
`!lituse_base!N'
Used with any memory format instruction (e.g. `ldl') to indicate
that the literal is used for an address load. The offset field of
the instruction must be zero. During relaxation, the code may be
altered to use a gp-relative load.
`!lituse_jsr!N'
Used with a register branch format instruction (e.g. `jsr') to
indicate that the literal is used for a call. During relaxation,
the code may be altered to use a direct branch (e.g. `bsr').
`!lituse_jsrdirect!N'
Similar to `lituse_jsr', but also that this call cannot be vectored
through a PLT entry. This is useful for functions with special
calling conventions which do not allow the normal call-clobbered
registers to be clobbered.
`!lituse_bytoff!N'
Used with a byte mask instruction (e.g. `extbl') to indicate that
only the low 3 bits of the address are relevant. During
relaxation, the code may be altered to use an immediate instead of
a register shift.
`!lituse_addr!N'
Used with any other instruction to indicate that the original
address is in fact used, and the original `ldq' instruction may
not be altered or deleted. This is useful in conjunction with
`lituse_jsr' to test whether a weak symbol is defined.
ldq $27,foo($29) !literal!1
beq $27,is_undef !lituse_addr!1
jsr $26,($27),foo !lituse_jsr!1
`!lituse_tlsgd!N'
Used with a register branch format instruction to indicate that the
literal is the call to `__tls_get_addr' used to compute the
address of the thread-local storage variable whose descriptor was
loaded with `!tlsgd!N'.
`!lituse_tlsldm!N'
Used with a register branch format instruction to indicate that the
literal is the call to `__tls_get_addr' used to compute the
address of the base of the thread-local storage block for the
current module. The descriptor for the module must have been
loaded with `!tlsldm!N'.
`!gpdisp!N'
Used with `ldah' and `lda' to load the GP from the current
address, a-la the `ldgp' macro. The source register for the
`ldah' instruction must contain the address of the `ldah'
instruction. There must be exactly one `lda' instruction paired
with the `ldah' instruction, though it may appear anywhere in the
instruction stream. The immediate operands must be zero.
bsr $26,foo
ldah $29,0($26) !gpdisp!1
lda $29,0($29) !gpdisp!1
`!gprelhigh'
Used with an `ldah' instruction to add the high 16 bits of a
32-bit displacement from the GP.
`!gprellow'
Used with any memory format instruction to add the low 16 bits of a
32-bit displacement from the GP.
`!gprel'
Used with any memory format instruction to add a 16-bit
displacement from the GP.
`!samegp'
Used with any branch format instruction to skip the GP load at the
target address. The referenced symbol must have the same GP as the
source object file, and it must be declared to either not use `$27'
or perform a standard GP load in the first two instructions via the
`.prologue' directive.
`!tlsgd'
`!tlsgd!N'
Used with an `lda' instruction to load the address of a TLS
descriptor for a symbol in the GOT.
The sequence number N is optional, and if present it used to pair
the descriptor load with both the `literal' loading the address of
the `__tls_get_addr' function and the `lituse_tlsgd' marking the
call to that function.
For proper relaxation, both the `tlsgd', `literal' and `lituse'
relocations must be in the same extended basic block. That is,
the relocation with the lowest address must be executed first at
runtime.
`!tlsldm'
`!tlsldm!N'
Used with an `lda' instruction to load the address of a TLS
descriptor for the current module in the GOT.
Similar in other respects to `tlsgd'.
`!gotdtprel'
Used with an `ldq' instruction to load the offset of the TLS
symbol within its module's thread-local storage block. Also known
as the dynamic thread pointer offset or dtp-relative offset.
`!dtprelhi'
`!dtprello'
`!dtprel'
Like `gprel' relocations except they compute dtp-relative offsets.
`!gottprel'
Used with an `ldq' instruction to load the offset of the TLS
symbol from the thread pointer. Also known as the tp-relative
offset.
`!tprelhi'
`!tprello'
`!tprel'
Like `gprel' relocations except they compute tp-relative offsets.
File: as.info, Node: Alpha Floating Point, Next: Alpha Directives, Prev: Alpha Syntax, Up: Alpha-Dependent
8.1.4 Floating Point
--------------------
The Alpha family uses both IEEE and VAX floating-point numbers.
File: as.info, Node: Alpha Directives, Next: Alpha Opcodes, Prev: Alpha Floating Point, Up: Alpha-Dependent
8.1.5 Alpha Assembler Directives
--------------------------------
`as' for the Alpha supports many additional directives for
compatibility with the native assembler. This section describes them
only briefly.
These are the additional directives in `as' for the Alpha:
`.arch CPU'
Specifies the target processor. This is equivalent to the `-mCPU'
command-line option. *Note Options: Alpha Options, for a list of
values for CPU.
`.ent FUNCTION[, N]'
Mark the beginning of FUNCTION. An optional number may follow for
compatibility with the OSF/1 assembler, but is ignored. When
generating `.mdebug' information, this will create a procedure
descriptor for the function. In ELF, it will mark the symbol as a
function a-la the generic `.type' directive.
`.end FUNCTION'
Mark the end of FUNCTION. In ELF, it will set the size of the
symbol a-la the generic `.size' directive.
`.mask MASK, OFFSET'
Indicate which of the integer registers are saved in the current
function's stack frame. MASK is interpreted a bit mask in which
bit N set indicates that register N is saved. The registers are
saved in a block located OFFSET bytes from the "canonical frame
address" (CFA) which is the value of the stack pointer on entry to
the function. The registers are saved sequentially, except that
the return address register (normally `$26') is saved first.
This and the other directives that describe the stack frame are
currently only used when generating `.mdebug' information. They
may in the future be used to generate DWARF2 `.debug_frame' unwind
information for hand written assembly.
`.fmask MASK, OFFSET'
Indicate which of the floating-point registers are saved in the
current stack frame. The MASK and OFFSET parameters are
interpreted as with `.mask'.
`.frame FRAMEREG, FRAMEOFFSET, RETREG[, ARGOFFSET]'
Describes the shape of the stack frame. The frame pointer in use
is FRAMEREG; normally this is either `$fp' or `$sp'. The frame
pointer is FRAMEOFFSET bytes below the CFA. The return address is
initially located in RETREG until it is saved as indicated in
`.mask'. For compatibility with OSF/1 an optional ARGOFFSET
parameter is accepted and ignored. It is believed to indicate the
offset from the CFA to the saved argument registers.
`.prologue N'
Indicate that the stack frame is set up and all registers have been
spilled. The argument N indicates whether and how the function
uses the incoming "procedure vector" (the address of the called
function) in `$27'. 0 indicates that `$27' is not used; 1
indicates that the first two instructions of the function use `$27'
to perform a load of the GP register; 2 indicates that `$27' is
used in some non-standard way and so the linker cannot elide the
load of the procedure vector during relaxation.
`.usepv FUNCTION, WHICH'
Used to indicate the use of the `$27' register, similar to
`.prologue', but without the other semantics of needing to be
inside an open `.ent'/`.end' block.
The WHICH argument should be either `no', indicating that `$27' is
not used, or `std', indicating that the first two instructions of
the function perform a GP load.
One might use this directive instead of `.prologue' if you are
also using dwarf2 CFI directives.
`.gprel32 EXPRESSION'
Computes the difference between the address in EXPRESSION and the
GP for the current object file, and stores it in 4 bytes. In
addition to being smaller than a full 8 byte address, this also
does not require a dynamic relocation when used in a shared
library.
`.t_floating EXPRESSION'
Stores EXPRESSION as an IEEE double precision value.
`.s_floating EXPRESSION'
Stores EXPRESSION as an IEEE single precision value.
`.f_floating EXPRESSION'
Stores EXPRESSION as a VAX F format value.
`.g_floating EXPRESSION'
Stores EXPRESSION as a VAX G format value.
`.d_floating EXPRESSION'
Stores EXPRESSION as a VAX D format value.
`.set FEATURE'
Enables or disables various assembler features. Using the positive
name of the feature enables while using `noFEATURE' disables.
`at'
Indicates that macro expansions may clobber the "assembler
temporary" (`$at' or `$28') register. Some macros may not be
expanded without this and will generate an error message if
`noat' is in effect. When `at' is in effect, a warning will
be generated if `$at' is used by the programmer.
`macro'
Enables the expansion of macro instructions. Note that
variants of real instructions, such as `br label' vs `br
$31,label' are considered alternate forms and not macros.
`move'
`reorder'
`volatile'
These control whether and how the assembler may re-order
instructions. Accepted for compatibility with the OSF/1
assembler, but `as' does not do instruction scheduling, so
these features are ignored.
The following directives are recognized for compatibility with the
OSF/1 assembler but are ignored.
.proc .aproc
.reguse .livereg
.option .aent
.ugen .eflag
.alias .noalias
File: as.info, Node: Alpha Opcodes, Prev: Alpha Directives, Up: Alpha-Dependent
8.1.6 Opcodes
-------------
For detailed information on the Alpha machine instruction set, see the
Alpha Architecture Handbook
(ftp://ftp.digital.com/pub/Digital/info/semiconductor/literature/alphaahb.pdf).
File: as.info, Node: ARC-Dependent, Next: ARM-Dependent, Prev: Alpha-Dependent, Up: Machine Dependencies
8.2 ARC Dependent Features
==========================
* Menu:
* ARC Options:: Options
* ARC Syntax:: Syntax
* ARC Floating Point:: Floating Point
* ARC Directives:: ARC Machine Directives
* ARC Opcodes:: Opcodes
File: as.info, Node: ARC Options, Next: ARC Syntax, Up: ARC-Dependent
8.2.1 Options
-------------
`-marc[5|6|7|8]'
This option selects the core processor variant. Using `-marc' is
the same as `-marc6', which is also the default.
`arc5'
Base instruction set.
`arc6'
Jump-and-link (jl) instruction. No requirement of an
instruction between setting flags and conditional jump. For
example:
mov.f r0,r1
beq foo
`arc7'
Break (brk) and sleep (sleep) instructions.
`arc8'
Software interrupt (swi) instruction.
Note: the `.option' directive can to be used to select a core
variant from within assembly code.
`-EB'
This option specifies that the output generated by the assembler
should be marked as being encoded for a big-endian processor.
`-EL'
This option specifies that the output generated by the assembler
should be marked as being encoded for a little-endian processor -
this is the default.
File: as.info, Node: ARC Syntax, Next: ARC Floating Point, Prev: ARC Options, Up: ARC-Dependent
8.2.2 Syntax
------------
* Menu:
* ARC-Chars:: Special Characters
* ARC-Regs:: Register Names
File: as.info, Node: ARC-Chars, Next: ARC-Regs, Up: ARC Syntax
8.2.2.1 Special Characters
..........................
*TODO*
File: as.info, Node: ARC-Regs, Prev: ARC-Chars, Up: ARC Syntax
8.2.2.2 Register Names
......................
*TODO*
File: as.info, Node: ARC Floating Point, Next: ARC Directives, Prev: ARC Syntax, Up: ARC-Dependent
8.2.3 Floating Point
--------------------
The ARC core does not currently have hardware floating point support.
Software floating point support is provided by `GCC' and uses IEEE
floating-point numbers.
File: as.info, Node: ARC Directives, Next: ARC Opcodes, Prev: ARC Floating Point, Up: ARC-Dependent
8.2.4 ARC Machine Directives
----------------------------
The ARC version of `as' supports the following additional machine
directives:
`.2byte EXPRESSIONS'
*TODO*
`.3byte EXPRESSIONS'
*TODO*
`.4byte EXPRESSIONS'
*TODO*
`.extAuxRegister NAME,ADDRESS,MODE'
The ARCtangent A4 has extensible auxiliary register space. The
auxiliary registers can be defined in the assembler source code by
using this directive. The first parameter is the NAME of the new
auxiallry register. The second parameter is the ADDRESS of the
register in the auxiliary register memory map for the variant of
the ARC. The third parameter specifies the MODE in which the
register can be operated is and it can be one of:
`r (readonly)'
`w (write only)'
`r|w (read or write)'
For example:
.extAuxRegister mulhi,0x12,w
This specifies an extension auxiliary register called _mulhi_
which is at address 0x12 in the memory space and which is only
writable.
`.extCondCode SUFFIX,VALUE'
The condition codes on the ARCtangent A4 are extensible and can be
specified by means of this assembler directive. They are specified
by the suffix and the value for the condition code. They can be
used to specify extra condition codes with any values. For
example:
.extCondCode is_busy,0x14
add.is_busy r1,r2,r3
bis_busy _main
`.extCoreRegister NAME,REGNUM,MODE,SHORTCUT'
Specifies an extension core register NAME for the application.
This allows a register NAME with a valid REGNUM between 0 and 60,
with the following as valid values for MODE
`_r_ (readonly)'
`_w_ (write only)'
`_r|w_ (read or write)'
The other parameter gives a description of the register having a
SHORTCUT in the pipeline. The valid values are:
`can_shortcut'
`cannot_shortcut'
For example:
.extCoreRegister mlo,57,r,can_shortcut
This defines an extension core register mlo with the value 57 which
can shortcut the pipeline.
`.extInstruction NAME,OPCODE,SUBOPCODE,SUFFIXCLASS,SYNTAXCLASS'
The ARCtangent A4 allows the user to specify extension
instructions. The extension instructions are not macros. The
assembler creates encodings for use of these instructions
according to the specification by the user. The parameters are:
*NAME
Name of the extension instruction
*OPCODE
Opcode to be used. (Bits 27:31 in the encoding). Valid values
0x10-0x1f or 0x03
*SUBOPCODE
Subopcode to be used. Valid values are from 0x09-0x3f.
However the correct value also depends on SYNTAXCLASS
*SUFFIXCLASS
Determines the kinds of suffixes to be allowed. Valid values
are `SUFFIX_NONE', `SUFFIX_COND', `SUFFIX_FLAG' which
indicates the absence or presence of conditional suffixes and
flag setting by the extension instruction. It is also
possible to specify that an instruction sets the flags and is
conditional by using `SUFFIX_CODE' | `SUFFIX_FLAG'.
*SYNTAXCLASS
Determines the syntax class for the instruction. It can have
the following values:
``SYNTAX_2OP':'
2 Operand Instruction
``SYNTAX_3OP':'
3 Operand Instruction
In addition there could be modifiers for the syntax class as
described below:
Syntax Class Modifiers are:
- `OP1_MUST_BE_IMM': Modifies syntax class SYNTAX_3OP,
specifying that the first operand of a three-operand
instruction must be an immediate (i.e. the result is
discarded). OP1_MUST_BE_IMM is used by bitwise ORing it
with SYNTAX_3OP as given in the example below. This
could usually be used to set the flags using specific
instructions and not retain results.
- `OP1_IMM_IMPLIED': Modifies syntax class SYNTAX_20P, it
specifies that there is an implied immediate destination
operand which does not appear in the syntax. For
example, if the source code contains an instruction like:
inst r1,r2
it really means that the first argument is an implied
immediate (that is, the result is discarded). This is
the same as though the source code were: inst 0,r1,r2.
You use OP1_IMM_IMPLIED by bitwise ORing it with
SYNTAX_20P.
For example, defining 64-bit multiplier with immediate operands:
.extInstruction mp64,0x14,0x0,SUFFIX_COND | SUFFIX_FLAG ,
SYNTAX_3OP|OP1_MUST_BE_IMM
The above specifies an extension instruction called mp64 which has
3 operands, sets the flags, can be used with a condition code, for
which the first operand is an immediate. (Equivalent to
discarding the result of the operation).
.extInstruction mul64,0x14,0x00,SUFFIX_COND, SYNTAX_2OP|OP1_IMM_IMPLIED
This describes a 2 operand instruction with an implicit first
immediate operand. The result of this operation would be
discarded.
`.half EXPRESSIONS'
*TODO*
`.long EXPRESSIONS'
*TODO*
`.option ARC|ARC5|ARC6|ARC7|ARC8'
The `.option' directive must be followed by the desired core
version. Again `arc' is an alias for `arc6'.
Note: the `.option' directive overrides the command line option
`-marc'; a warning is emitted when the version is not consistent
between the two - even for the implicit default core version
(arc6).
`.short EXPRESSIONS'
*TODO*
`.word EXPRESSIONS'
*TODO*
File: as.info, Node: ARC Opcodes, Prev: ARC Directives, Up: ARC-Dependent
8.2.5 Opcodes
-------------
For information on the ARC instruction set, see `ARC Programmers
Reference Manual', ARC International (www.arc.com)
File: as.info, Node: ARM-Dependent, Next: BFIN-Dependent, Prev: ARC-Dependent, Up: Machine Dependencies
8.3 ARM Dependent Features
==========================
* Menu:
* ARM Options:: Options
* ARM Syntax:: Syntax
* ARM Floating Point:: Floating Point
* ARM Directives:: ARM Machine Directives
* ARM Opcodes:: Opcodes
* ARM Mapping Symbols:: Mapping Symbols
File: as.info, Node: ARM Options, Next: ARM Syntax, Up: ARM-Dependent
8.3.1 Options
-------------
`-mcpu=PROCESSOR[+EXTENSION...]'
This option specifies the target processor. The assembler will
issue an error message if an attempt is made to assemble an
instruction which will not execute on the target processor. The
following processor names are recognized: `arm1', `arm2', `arm250',
`arm3', `arm6', `arm60', `arm600', `arm610', `arm620', `arm7',
`arm7m', `arm7d', `arm7dm', `arm7di', `arm7dmi', `arm70', `arm700',
`arm700i', `arm710', `arm710t', `arm720', `arm720t', `arm740t',
`arm710c', `arm7100', `arm7500', `arm7500fe', `arm7t', `arm7tdmi',
`arm7tdmi-s', `arm8', `arm810', `strongarm', `strongarm1',
`strongarm110', `strongarm1100', `strongarm1110', `arm9', `arm920',
`arm920t', `arm922t', `arm940t', `arm9tdmi', `arm9e', `arm926e',
`arm926ej-s', `arm946e-r0', `arm946e', `arm946e-s', `arm966e-r0',
`arm966e', `arm966e-s', `arm968e-s', `arm10t', `arm10tdmi',
`arm10e', `arm1020', `arm1020t', `arm1020e', `arm1022e',
`arm1026ej-s', `arm1136j-s', `arm1136jf-s', `arm1156t2-s',
`arm1156t2f-s', `arm1176jz-s', `arm1176jzf-s', `mpcore',
`mpcorenovfp', `cortex-a8', `cortex-r4', `cortex-m3', `ep9312'
(ARM920 with Cirrus Maverick coprocessor), `i80200' (Intel XScale
processor) `iwmmxt' (Intel(r) XScale processor with Wireless
MMX(tm) technology coprocessor) and `xscale'. The special name
`all' may be used to allow the assembler to accept instructions
valid for any ARM processor.
In addition to the basic instruction set, the assembler can be
told to accept various extension mnemonics that extend the
processor using the co-processor instruction space. For example,
`-mcpu=arm920+maverick' is equivalent to specifying
`-mcpu=ep9312'. The following extensions are currently supported:
`+maverick' `+iwmmxt' and `+xscale'.
`-march=ARCHITECTURE[+EXTENSION...]'
This option specifies the target architecture. The assembler will
issue an error message if an attempt is made to assemble an
instruction which will not execute on the target architecture.
The following architecture names are recognized: `armv1', `armv2',
`armv2a', `armv2s', `armv3', `armv3m', `armv4', `armv4xm',
`armv4t', `armv4txm', `armv5', `armv5t', `armv5txm', `armv5te',
`armv5texp', `armv6', `armv6j', `armv6k', `armv6z', `armv6zk',
`armv7', `armv7a', `armv7r', `armv7m', `iwmmxt' and `xscale'. If
both `-mcpu' and `-march' are specified, the assembler will use
the setting for `-mcpu'.
The architecture option can be extended with the same instruction
set extension options as the `-mcpu' option.
`-mfpu=FLOATING-POINT-FORMAT'
This option specifies the floating point format to assemble for.
The assembler will issue an error message if an attempt is made to
assemble an instruction which will not execute on the target
floating point unit. The following format options are recognized:
`softfpa', `fpe', `fpe2', `fpe3', `fpa', `fpa10', `fpa11',
`arm7500fe', `softvfp', `softvfp+vfp', `vfp', `vfp10', `vfp10-r0',
`vfp9', `vfpxd', `arm1020t', `arm1020e', `arm1136jf-s' and
`maverick'.
In addition to determining which instructions are assembled, this
option also affects the way in which the `.double' assembler
directive behaves when assembling little-endian code.
The default is dependent on the processor selected. For
Architecture 5 or later, the default is to assembler for VFP
instructions; for earlier architectures the default is to assemble
for FPA instructions.
`-mthumb'
This option specifies that the assembler should start assembling
Thumb instructions; that is, it should behave as though the file
starts with a `.code 16' directive.
`-mthumb-interwork'
This option specifies that the output generated by the assembler
should be marked as supporting interworking.
`-mapcs `[26|32]''
This option specifies that the output generated by the assembler
should be marked as supporting the indicated version of the Arm
Procedure. Calling Standard.
`-matpcs'
This option specifies that the output generated by the assembler
should be marked as supporting the Arm/Thumb Procedure Calling
Standard. If enabled this option will cause the assembler to
create an empty debugging section in the object file called
.arm.atpcs. Debuggers can use this to determine the ABI being
used by.
`-mapcs-float'
This indicates the floating point variant of the APCS should be
used. In this variant floating point arguments are passed in FP
registers rather than integer registers.
`-mapcs-reentrant'
This indicates that the reentrant variant of the APCS should be
used. This variant supports position independent code.
`-mfloat-abi=ABI'
This option specifies that the output generated by the assembler
should be marked as using specified floating point ABI. The
following values are recognized: `soft', `softfp' and `hard'.
`-meabi=VER'
This option specifies which EABI version the produced object files
should conform to. The following values are recognised: `gnu', `4'
and `5'.
`-EB'
This option specifies that the output generated by the assembler
should be marked as being encoded for a big-endian processor.
`-EL'
This option specifies that the output generated by the assembler
should be marked as being encoded for a little-endian processor.
`-k'
This option specifies that the output of the assembler should be
marked as position-independent code (PIC).
File: as.info, Node: ARM Syntax, Next: ARM Floating Point, Prev: ARM Options, Up: ARM-Dependent
8.3.2 Syntax
------------
* Menu:
* ARM-Chars:: Special Characters
* ARM-Regs:: Register Names
File: as.info, Node: ARM-Chars, Next: ARM-Regs, Up: ARM Syntax
8.3.2.1 Special Characters
..........................
The presence of a `@' on a line indicates the start of a comment that
extends to the end of the current line. If a `#' appears as the first
character of a line, the whole line is treated as a comment.
The `;' character can be used instead of a newline to separate
statements.
Either `#' or `$' can be used to indicate immediate operands.
*TODO* Explain about /data modifier on symbols.
File: as.info, Node: ARM-Regs, Prev: ARM-Chars, Up: ARM Syntax
8.3.2.2 Register Names
......................
*TODO* Explain about ARM register naming, and the predefined names.
File: as.info, Node: ARM Floating Point, Next: ARM Directives, Prev: ARM Syntax, Up: ARM-Dependent
8.3.3 Floating Point
--------------------
The ARM family uses IEEE floating-point numbers.
File: as.info, Node: ARM Directives, Next: ARM Opcodes, Prev: ARM Floating Point, Up: ARM-Dependent
8.3.4 ARM Machine Directives
----------------------------
`.align EXPRESSION [, EXPRESSION]'
This is the generic .ALIGN directive. For the ARM however if the
first argument is zero (ie no alignment is needed) the assembler
will behave as if the argument had been 2 (ie pad to the next four
byte boundary). This is for compatibility with ARM's own
assembler.
`NAME .req REGISTER NAME'
This creates an alias for REGISTER NAME called NAME. For example:
foo .req r0
`.unreq ALIAS-NAME'
This undefines a register alias which was previously defined using
the `req' directive. For example:
foo .req r0
.unreq foo
An error occurs if the name is undefined. Note - this pseudo op
can be used to delete builtin in register name aliases (eg 'r0').
This should only be done if it is really necessary.
`.code `[16|32]''
This directive selects the instruction set being generated. The
value 16 selects Thumb, with the value 32 selecting ARM.
`.thumb'
This performs the same action as .CODE 16.
`.arm'
This performs the same action as .CODE 32.
`.force_thumb'
This directive forces the selection of Thumb instructions, even if
the target processor does not support those instructions
`.thumb_func'
This directive specifies that the following symbol is the name of a
Thumb encoded function. This information is necessary in order to
allow the assembler and linker to generate correct code for
interworking between Arm and Thumb instructions and should be used
even if interworking is not going to be performed. The presence
of this directive also implies `.thumb'
`.thumb_set'
This performs the equivalent of a `.set' directive in that it
creates a symbol which is an alias for another symbol (possibly
not yet defined). This directive also has the added property in
that it marks the aliased symbol as being a thumb function entry
point, in the same way that the `.thumb_func' directive does.
`.ltorg'
This directive causes the current contents of the literal pool to
be dumped into the current section (which is assumed to be the
.text section) at the current location (aligned to a word
boundary). `GAS' maintains a separate literal pool for each
section and each sub-section. The `.ltorg' directive will only
affect the literal pool of the current section and sub-section.
At the end of assembly all remaining, un-empty literal pools will
automatically be dumped.
Note - older versions of `GAS' would dump the current literal pool
any time a section change occurred. This is no longer done, since
it prevents accurate control of the placement of literal pools.
`.pool'
This is a synonym for .ltorg.
`.unwind_fnstart'
Marks the start of a function with an unwind table entry.
`.unwind_fnend'
Marks the end of a function with an unwind table entry. The
unwind index table entry is created when this directive is
processed.
If no personality routine has been specified then standard
personality routine 0 or 1 will be used, depending on the number
of unwind opcodes required.
`.cantunwind'
Prevents unwinding through the current function. No personality
routine or exception table data is required or permitted.
`.personality NAME'
Sets the personality routine for the current function to NAME.
`.personalityindex INDEX'
Sets the personality routine for the current function to the EABI
standard routine number INDEX
`.handlerdata'
Marks the end of the current function, and the start of the
exception table entry for that function. Anything between this
directive and the `.fnend' directive will be added to the
exception table entry.
Must be preceded by a `.personality' or `.personalityindex'
directive.
`.save REGLIST'
Generate unwinder annotations to restore the registers in REGLIST.
The format of REGLIST is the same as the corresponding
store-multiple instruction.
_core registers_
.save {r4, r5, r6, lr}
stmfd sp!, {r4, r5, r6, lr}
_FPA registers_
.save f4, 2
sfmfd f4, 2, [sp]!
_VFP registers_
.save {d8, d9, d10}
fstmdf sp!, {d8, d9, d10}
_iWMMXt registers_
.save {wr10, wr11}
wstrd wr11, [sp, #-8]!
wstrd wr10, [sp, #-8]!
or
.save wr11
wstrd wr11, [sp, #-8]!
.save wr10
wstrd wr10, [sp, #-8]!
`.pad #COUNT'
Generate unwinder annotations for a stack adjustment of COUNT
bytes. A positive value indicates the function prologue allocated
stack space by decrementing the stack pointer.
`.movsp REG'
Tell the unwinder that REG contains the current stack pointer.
`.setfp FPREG, SPREG [, #OFFSET]'
Make all unwinder annotations relaive to a frame pointer. Without
this the unwinder will use offsets from the stack pointer.
The syntax of this directive is the same as the `sub' or `mov'
instruction used to set the frame pointer. SPREG must be either
`sp' or mentioned in a previous `.movsp' directive.
.movsp ip
mov ip, sp
...
.setfp fp, ip, #4
sub fp, ip, #4
`.raw OFFSET, BYTE1, ...'
Insert one of more arbitary unwind opcode bytes, which are known
to adjust the stack pointer by OFFSET bytes.
For example `.unwind_raw 4, 0xb1, 0x01' is equivalent to `.save
{r0}'
`.cpu NAME'
Select the target processor. Valid values for NAME are the same as
for the `-mcpu' commandline option.
`.arch NAME'
Select the target architecture. Valid values for NAME are the
same as for the `-march' commandline option.
`.fpu NAME'
Select the floating point unit to assemble for. Valid values for
NAME are the same as for the `-mfpu' commandline option.
`.eabi_attribute TAG, VALUE'
Set the EABI object attribute number TAG to VALUE. The value is
either a `number', `"string"', or `number, "string"' depending on
the tag.
File: as.info, Node: ARM Opcodes, Next: ARM Mapping Symbols, Prev: ARM Directives, Up: ARM-Dependent
8.3.5 Opcodes
-------------
`as' implements all the standard ARM opcodes. It also implements
several pseudo opcodes, including several synthetic load instructions.
`NOP'
nop
This pseudo op will always evaluate to a legal ARM instruction
that does nothing. Currently it will evaluate to MOV r0, r0.
`LDR'
ldr <register> , = <expression>
If expression evaluates to a numeric constant then a MOV or MVN
instruction will be used in place of the LDR instruction, if the
constant can be generated by either of these instructions.
Otherwise the constant will be placed into the nearest literal
pool (if it not already there) and a PC relative LDR instruction
will be generated.
`ADR'
adr <register> <label>
This instruction will load the address of LABEL into the indicated
register. The instruction will evaluate to a PC relative ADD or
SUB instruction depending upon where the label is located. If the
label is out of range, or if it is not defined in the same file
(and section) as the ADR instruction, then an error will be
generated. This instruction will not make use of the literal pool.
`ADRL'
adrl <register> <label>
This instruction will load the address of LABEL into the indicated
register. The instruction will evaluate to one or two PC relative
ADD or SUB instructions depending upon where the label is located.
If a second instruction is not needed a NOP instruction will be
generated in its place, so that this instruction is always 8 bytes
long.
If the label is out of range, or if it is not defined in the same
file (and section) as the ADRL instruction, then an error will be
generated. This instruction will not make use of the literal pool.
For information on the ARM or Thumb instruction sets, see `ARM
Software Development Toolkit Reference Manual', Advanced RISC Machines
Ltd.
File: as.info, Node: ARM Mapping Symbols, Prev: ARM Opcodes, Up: ARM-Dependent
8.3.6 Mapping Symbols
---------------------
The ARM ELF specification requires that special symbols be inserted
into object files to mark certain features:
`$a'
At the start of a region of code containing ARM instructions.
`$t'
At the start of a region of code containing THUMB instructions.
`$d'
At the start of a region of data.
The assembler will automatically insert these symbols for you - there
is no need to code them yourself. Support for tagging symbols ($b, $f,
$p and $m) which is also mentioned in the current ARM ELF specification
is not implemented. This is because they have been dropped from the
new EABI and so tools cannot rely upon their presence.
File: as.info, Node: BFIN-Dependent, Next: CRIS-Dependent, Prev: ARM-Dependent, Up: Machine Dependencies
8.4 Blackfin Dependent Features
===============================
* Menu:
* BFIN Syntax:: BFIN Syntax
* BFIN Directives:: BFIN Directives
File: as.info, Node: BFIN Syntax, Next: BFIN Directives, Up: BFIN-Dependent
8.4.1 Syntax
------------
`Special Characters'
Assembler input is free format and may appear anywhere on the line.
One instruction may extend across multiple lines or more than one
instruction may appear on the same line. White space (space, tab,
comments or newline) may appear anywhere between tokens. A token
must not have embedded spaces. Tokens include numbers, register
names, keywords, user identifiers, and also some multicharacter
special symbols like "+=", "/*" or "||".
`Instruction Delimiting'
A semicolon must terminate every instruction. Sometimes a complete
instruction will consist of more than one operation. There are two
cases where this occurs. The first is when two general operations
are combined. Normally a comma separates the different parts, as
in
a0= r3.h * r2.l, a1 = r3.l * r2.h ;
The second case occurs when a general instruction is combined with
one or two memory references for joint issue. The latter portions
are set off by a "||" token.
a0 = r3.h * r2.l || r1 = [p3++] || r4 = [i2++];
`Register Names'
The assembler treats register names and instruction keywords in a
case insensitive manner. User identifiers are case sensitive.
Thus, R3.l, R3.L, r3.l and r3.L are all equivalent input to the
assembler.
Register names are reserved and may not be used as program
identifiers.
Some operations (such as "Move Register") require a register pair.
Register pairs are always data registers and are denoted using a
colon, eg., R3:2. The larger number must be written firsts. Note
that the hardware only supports odd-even pairs, eg., R7:6, R5:4,
R3:2, and R1:0.
Some instructions (such as -SP (Push Multiple)) require a group of
adjacent registers. Adjacent registers are denoted in the syntax
by the range enclosed in parentheses and separated by a colon,
eg., (R7:3). Again, the larger number appears first.
Portions of a particular register may be individually specified.
This is written with a dot (".") following the register name and
then a letter denoting the desired portion. For 32-bit registers,
".H" denotes the most significant ("High") portion. ".L" denotes
the least-significant portion. The subdivisions of the 40-bit
registers are described later.
`Accumulators'
The set of 40-bit registers A1 and A0 that normally contain data
that is being manipulated. Each accumulator can be accessed in
four ways.
`one 40-bit register'
The register will be referred to as A1 or A0.
`one 32-bit register'
The registers are designated as A1.W or A0.W.
`two 16-bit registers'
The registers are designated as A1.H, A1.L, A0.H or A0.L.
`one 8-bit register'
The registers are designated as A1.X or A0.X for the bits that
extend beyond bit 31.
`Data Registers'
The set of 32-bit registers (R0, R1, R2, R3, R4, R5, R6 and R7)
that normally contain data for manipulation. These are
abbreviated as D-register or Dreg. Data registers can be accessed
as 32-bit registers or as two independent 16-bit registers. The
least significant 16 bits of each register is called the "low"
half and is desginated with ".L" following the register name. The
most significant 16 bits are called the "high" half and is
designated with ".H". following the name.
R7.L, r2.h, r4.L, R0.H
`Pointer Registers'
The set of 32-bit registers (P0, P1, P2, P3, P4, P5, SP and FP)
that normally contain byte addresses of data structures. These are
abbreviated as P-register or Preg.
p2, p5, fp, sp
`Stack Pointer SP'
The stack pointer contains the 32-bit address of the last occupied
byte location in the stack. The stack grows by decrementing the
stack pointer.
`Frame Pointer FP'
The frame pointer contains the 32-bit address of the previous frame
pointer in the stack. It is located at the top of a frame.
`Loop Top'
LT0 and LT1. These registers contain the 32-bit address of the
top of a zero overhead loop.
`Loop Count'
LC0 and LC1. These registers contain the 32-bit counter of the
zero overhead loop executions.
`Loop Bottom'
LB0 and LB1. These registers contain the 32-bit address of the
bottom of a zero overhead loop.
`Index Registers'
The set of 32-bit registers (I0, I1, I2, I3) that normally contain
byte addresses of data structures. Abbreviated I-register or Ireg.
`Modify Registers'
The set of 32-bit registers (M0, M1, M2, M3) that normally contain
offset values that are added and subracted to one of the index
registers. Abbreviated as Mreg.
`Length Registers'
The set of 32-bit registers (L0, L1, L2, L3) that normally contain
the length in bytes of the circular buffer. Abbreviated as Lreg.
Clear the Lreg to disable circular addressing for the
corresponding Ireg.
`Base Registers'
The set of 32-bit registers (B0, B1, B2, B3) that normally contain
the base address in bytes of the circular buffer. Abbreviated as
Breg.
`Floating Point'
The Blackfin family has no hardware floating point but the .float
directive generates ieee floating point numbers for use with
software floating point libraries.
`Blackfin Opcodes'
For detailed information on the Blackfin machine instruction set,
see the Blackfin(r) Processor Instruction Set Reference.
File: as.info, Node: BFIN Directives, Prev: BFIN Syntax, Up: BFIN-Dependent
8.4.2 Directives
----------------
The following directives are provided for compatibility with the VDSP
assembler.
`.byte2'
Initializes a four byte data object.
`.byte4'
Initializes a two byte data object.
`.db'
TBD
`.dd'
TBD
`.dw'
TBD
`.var'
Define and initialize a 32 bit data object.
File: as.info, Node: CRIS-Dependent, Next: D10V-Dependent, Prev: BFIN-Dependent, Up: Machine Dependencies
8.5 CRIS Dependent Features
===========================
* Menu:
* CRIS-Opts:: Command-line Options
* CRIS-Expand:: Instruction expansion
* CRIS-Symbols:: Symbols
* CRIS-Syntax:: Syntax
File: as.info, Node: CRIS-Opts, Next: CRIS-Expand, Up: CRIS-Dependent
8.5.1 Command-line Options
--------------------------
The CRIS version of `as' has these machine-dependent command-line
options.
The format of the generated object files can be either ELF or a.out,
specified by the command-line options `--emulation=crisaout' and
`--emulation=criself'. The default is ELF (criself), unless `as' has
been configured specifically for a.out by using the configuration name
`cris-axis-aout'.
There are two different link-incompatible ELF object file variants
for CRIS, for use in environments where symbols are expected to be
prefixed by a leading `_' character and for environments without such a
symbol prefix. The variant used for GNU/Linux port has no symbol
prefix. Which variant to produce is specified by either of the options
`--underscore' and `--no-underscore'. The default is `--underscore'.
Since symbols in CRIS a.out objects are expected to have a `_' prefix,
specifying `--no-underscore' when generating a.out objects is an error.
Besides the object format difference, the effect of this option is to
parse register names differently (*note crisnous::). The
`--no-underscore' option makes a `$' register prefix mandatory.
The option `--pic' must be passed to `as' in order to recognize the
symbol syntax used for ELF (SVR4 PIC) position-independent-code (*note
crispic::). This will also affect expansion of instructions. The
expansion with `--pic' will use PC-relative rather than (slightly
faster) absolute addresses in those expansions.
The option `--march=ARCHITECTURE' specifies the recognized
instruction set and recognized register names. It also controls the
architecture type of the object file. Valid values for ARCHITECTURE
are:
`v0_v10'
All instructions and register names for any architecture variant
in the set v0...v10 are recognized. This is the default if the
target is configured as cris-*.
`v10'
Only instructions and register names for CRIS v10 (as found in
ETRAX 100 LX) are recognized. This is the default if the target
is configured as crisv10-*.
`v32'
Only instructions and register names for CRIS v32 (code name
Guinness) are recognized. This is the default if the target is
configured as crisv32-*. This value implies `--no-mul-bug-abort'.
(A subsequent `--mul-bug-abort' will turn it back on.)
`common_v10_v32'
Only instructions with register names and addressing modes with
opcodes common to the v10 and v32 are recognized.
When `-N' is specified, `as' will emit a warning when a 16-bit
branch instruction is expanded into a 32-bit multiple-instruction
construct (*note CRIS-Expand::).
Some versions of the CRIS v10, for example in the Etrax 100 LX,
contain a bug that causes destabilizing memory accesses when a multiply
instruction is executed with certain values in the first operand just
before a cache-miss. When the `--mul-bug-abort' command line option is
active (the default value), `as' will refuse to assemble a file
containing a multiply instruction at a dangerous offset, one that could
be the last on a cache-line, or is in a section with insufficient
alignment. This placement checking does not catch any case where the
multiply instruction is dangerously placed because it is located in a
delay-slot. The `--mul-bug-abort' command line option turns off the
checking.
File: as.info, Node: CRIS-Expand, Next: CRIS-Symbols, Prev: CRIS-Opts, Up: CRIS-Dependent
8.5.2 Instruction expansion
---------------------------
`as' will silently choose an instruction that fits the operand size for
`[register+constant]' operands. For example, the offset `127' in
`move.d [r3+127],r4' fits in an instruction using a signed-byte offset.
Similarly, `move.d [r2+32767],r1' will generate an instruction using a
16-bit offset. For symbolic expressions and constants that do not fit
in 16 bits including the sign bit, a 32-bit offset is generated.
For branches, `as' will expand from a 16-bit branch instruction into
a sequence of instructions that can reach a full 32-bit address. Since
this does not correspond to a single instruction, such expansions can
optionally be warned about. *Note CRIS-Opts::.
If the operand is found to fit the range, a `lapc' mnemonic will
translate to a `lapcq' instruction. Use `lapc.d' to force the 32-bit
`lapc' instruction.
Similarly, the `addo' mnemonic will translate to the shortest
fitting instruction of `addoq', `addo.w' and `addo.d', when used with a
operand that is a constant known at assembly time.
File: as.info, Node: CRIS-Symbols, Next: CRIS-Syntax, Prev: CRIS-Expand, Up: CRIS-Dependent
8.5.3 Symbols
-------------
Some symbols are defined by the assembler. They're intended to be used
in conditional assembly, for example:
.if ..asm.arch.cris.v32
CODE FOR CRIS V32
.elseif ..asm.arch.cris.common_v10_v32
CODE COMMON TO CRIS V32 AND CRIS V10
.elseif ..asm.arch.cris.v10 | ..asm.arch.cris.any_v0_v10
CODE FOR V10
.else
.error "Code needs to be added here."
.endif
These symbols are defined in the assembler, reflecting command-line
options, either when specified or the default. They are always
defined, to 0 or 1.
`..asm.arch.cris.any_v0_v10'
This symbol is non-zero when `--march=v0_v10' is specified or the
default.
`..asm.arch.cris.common_v10_v32'
Set according to the option `--march=common_v10_v32'.
`..asm.arch.cris.v10'
Reflects the option `--march=v10'.
`..asm.arch.cris.v32'
Corresponds to `--march=v10'.
Speaking of symbols, when a symbol is used in code, it can have a
suffix modifying its value for use in position-independent code. *Note
CRIS-Pic::.
File: as.info, Node: CRIS-Syntax, Prev: CRIS-Symbols, Up: CRIS-Dependent
8.5.4 Syntax
------------
There are different aspects of the CRIS assembly syntax.
* Menu:
* CRIS-Chars:: Special Characters
* CRIS-Pic:: Position-Independent Code Symbols
* CRIS-Regs:: Register Names
* CRIS-Pseudos:: Assembler Directives
File: as.info, Node: CRIS-Chars, Next: CRIS-Pic, Up: CRIS-Syntax
8.5.4.1 Special Characters
..........................
The character `#' is a line comment character. It starts a comment if
and only if it is placed at the beginning of a line.
A `;' character starts a comment anywhere on the line, causing all
characters up to the end of the line to be ignored.
A `@' character is handled as a line separator equivalent to a
logical new-line character (except in a comment), so separate
instructions can be specified on a single line.
File: as.info, Node: CRIS-Pic, Next: CRIS-Regs, Prev: CRIS-Chars, Up: CRIS-Syntax
8.5.4.2 Symbols in position-independent code
............................................
When generating position-independent code (SVR4 PIC) for use in
cris-axis-linux-gnu or crisv32-axis-linux-gnu shared libraries, symbol
suffixes are used to specify what kind of run-time symbol lookup will
be used, expressed in the object as different _relocation types_.
Usually, all absolute symbol values must be located in a table, the
_global offset table_, leaving the code position-independent;
independent of values of global symbols and independent of the address
of the code. The suffix modifies the value of the symbol, into for
example an index into the global offset table where the real symbol
value is entered, or a PC-relative value, or a value relative to the
start of the global offset table. All symbol suffixes start with the
character `:' (omitted in the list below). Every symbol use in code or
a read-only section must therefore have a PIC suffix to enable a useful
shared library to be created. Usually, these constructs must not be
used with an additive constant offset as is usually allowed, i.e. no 4
as in `symbol + 4' is allowed. This restriction is checked at
link-time, not at assembly-time.
`GOT'
Attaching this suffix to a symbol in an instruction causes the
symbol to be entered into the global offset table. The value is a
32-bit index for that symbol into the global offset table. The
name of the corresponding relocation is `R_CRIS_32_GOT'. Example:
`move.d [$r0+extsym:GOT],$r9'
`GOT16'
Same as for `GOT', but the value is a 16-bit index into the global
offset table. The corresponding relocation is `R_CRIS_16_GOT'.
Example: `move.d [$r0+asymbol:GOT16],$r10'
`PLT'
This suffix is used for function symbols. It causes a _procedure
linkage table_, an array of code stubs, to be created at the time
the shared object is created or linked against, together with a
global offset table entry. The value is a pc-relative offset to
the corresponding stub code in the procedure linkage table. This
arrangement causes the run-time symbol resolver to be called to
look up and set the value of the symbol the first time the
function is called (at latest; depending environment variables).
It is only safe to leave the symbol unresolved this way if all
references are function calls. The name of the relocation is
`R_CRIS_32_PLT_PCREL'. Example: `add.d fnname:PLT,$pc'
`PLTG'
Like PLT, but the value is relative to the beginning of the global
offset table. The relocation is `R_CRIS_32_PLT_GOTREL'. Example:
`move.d fnname:PLTG,$r3'
`GOTPLT'
Similar to `PLT', but the value of the symbol is a 32-bit index
into the global offset table. This is somewhat of a mix between
the effect of the `GOT' and the `PLT' suffix; the difference to
`GOT' is that there will be a procedure linkage table entry
created, and that the symbol is assumed to be a function entry and
will be resolved by the run-time resolver as with `PLT'. The
relocation is `R_CRIS_32_GOTPLT'. Example: `jsr
[$r0+fnname:GOTPLT]'
`GOTPLT16'
A variant of `GOTPLT' giving a 16-bit value. Its relocation name
is `R_CRIS_16_GOTPLT'. Example: `jsr [$r0+fnname:GOTPLT16]'
`GOTOFF'
This suffix must only be attached to a local symbol, but may be
used in an expression adding an offset. The value is the address
of the symbol relative to the start of the global offset table.
The relocation name is `R_CRIS_32_GOTREL'. Example: `move.d
[$r0+localsym:GOTOFF],r3'
File: as.info, Node: CRIS-Regs, Next: CRIS-Pseudos, Prev: CRIS-Pic, Up: CRIS-Syntax
8.5.4.3 Register names
......................
A `$' character may always prefix a general or special register name in
an instruction operand but is mandatory when the option
`--no-underscore' is specified or when the `.syntax register_prefix'
directive is in effect (*note crisnous::). Register names are
case-insensitive.
File: as.info, Node: CRIS-Pseudos, Prev: CRIS-Regs, Up: CRIS-Syntax
8.5.4.4 Assembler Directives
............................
There are a few CRIS-specific pseudo-directives in addition to the
generic ones. *Note Pseudo Ops::. Constants emitted by
pseudo-directives are in little-endian order for CRIS. There is no
support for floating-point-specific directives for CRIS.
`.dword EXPRESSIONS'
The `.dword' directive is a synonym for `.int', expecting zero or
more EXPRESSIONS, separated by commas. For each expression, a
32-bit little-endian constant is emitted.
`.syntax ARGUMENT'
The `.syntax' directive takes as ARGUMENT one of the following
case-sensitive choices.
`no_register_prefix'
The `.syntax no_register_prefix' directive makes a `$'
character prefix on all registers optional. It overrides a
previous setting, including the corresponding effect of the
option `--no-underscore'. If this directive is used when
ordinary symbols do not have a `_' character prefix, care
must be taken to avoid ambiguities whether an operand is a
register or a symbol; using symbols with names the same as
general or special registers then invoke undefined behavior.
`register_prefix'
This directive makes a `$' character prefix on all registers
mandatory. It overrides a previous setting, including the
corresponding effect of the option `--underscore'.
`leading_underscore'
This is an assertion directive, emitting an error if the
`--no-underscore' option is in effect.
`no_leading_underscore'
This is the opposite of the `.syntax leading_underscore'
directive and emits an error if the option `--underscore' is
in effect.
`.arch ARGUMENT'
This is an assertion directive, giving an error if the specified
ARGUMENT is not the same as the specified or default value for the
`--march=ARCHITECTURE' option (*note march-option::).
File: as.info, Node: D10V-Dependent, Next: D30V-Dependent, Prev: CRIS-Dependent, Up: Machine Dependencies
8.6 D10V Dependent Features
===========================
* Menu:
* D10V-Opts:: D10V Options
* D10V-Syntax:: Syntax
* D10V-Float:: Floating Point
* D10V-Opcodes:: Opcodes
File: as.info, Node: D10V-Opts, Next: D10V-Syntax, Up: D10V-Dependent
8.6.1 D10V Options
------------------
The Mitsubishi D10V version of `as' has a few machine dependent options.
`-O'
The D10V can often execute two sub-instructions in parallel. When
this option is used, `as' will attempt to optimize its output by
detecting when instructions can be executed in parallel.
`--nowarnswap'
To optimize execution performance, `as' will sometimes swap the
order of instructions. Normally this generates a warning. When
this option is used, no warning will be generated when
instructions are swapped.
`--gstabs-packing'
`--no-gstabs-packing'
`as' packs adjacent short instructions into a single packed
instruction. `--no-gstabs-packing' turns instruction packing off if
`--gstabs' is specified as well; `--gstabs-packing' (the default)
turns instruction packing on even when `--gstabs' is specified.
File: as.info, Node: D10V-Syntax, Next: D10V-Float, Prev: D10V-Opts, Up: D10V-Dependent
8.6.2 Syntax
------------
The D10V syntax is based on the syntax in Mitsubishi's D10V
architecture manual. The differences are detailed below.
* Menu:
* D10V-Size:: Size Modifiers
* D10V-Subs:: Sub-Instructions
* D10V-Chars:: Special Characters
* D10V-Regs:: Register Names
* D10V-Addressing:: Addressing Modes
* D10V-Word:: @WORD Modifier
File: as.info, Node: D10V-Size, Next: D10V-Subs, Up: D10V-Syntax
8.6.2.1 Size Modifiers
......................
The D10V version of `as' uses the instruction names in the D10V
Architecture Manual. However, the names in the manual are sometimes
ambiguous. There are instruction names that can assemble to a short or
long form opcode. How does the assembler pick the correct form? `as'
will always pick the smallest form if it can. When dealing with a
symbol that is not defined yet when a line is being assembled, it will
always use the long form. If you need to force the assembler to use
either the short or long form of the instruction, you can append either
`.s' (short) or `.l' (long) to it. For example, if you are writing an
assembly program and you want to do a branch to a symbol that is
defined later in your program, you can write `bra.s foo'. Objdump
and GDB will always append `.s' or `.l' to instructions which have both
short and long forms.
File: as.info, Node: D10V-Subs, Next: D10V-Chars, Prev: D10V-Size, Up: D10V-Syntax
8.6.2.2 Sub-Instructions
........................
The D10V assembler takes as input a series of instructions, either
one-per-line, or in the special two-per-line format described in the
next section. Some of these instructions will be short-form or
sub-instructions. These sub-instructions can be packed into a single
instruction. The assembler will do this automatically. It will also
detect when it should not pack instructions. For example, when a label
is defined, the next instruction will never be packaged with the
previous one. Whenever a branch and link instruction is called, it
will not be packaged with the next instruction so the return address
will be valid. Nops are automatically inserted when necessary.
If you do not want the assembler automatically making these
decisions, you can control the packaging and execution type (parallel
or sequential) with the special execution symbols described in the next
section.
File: as.info, Node: D10V-Chars, Next: D10V-Regs, Prev: D10V-Subs, Up: D10V-Syntax
8.6.2.3 Special Characters
..........................
`;' and `#' are the line comment characters. Sub-instructions may be
executed in order, in reverse-order, or in parallel. Instructions
listed in the standard one-per-line format will be executed
sequentially. To specify the executing order, use the following
symbols:
`->'
Sequential with instruction on the left first.
`<-'
Sequential with instruction on the right first.
`||'
Parallel
The D10V syntax allows either one instruction per line, one
instruction per line with the execution symbol, or two instructions per
line. For example
`abs a1 -> abs r0'
Execute these sequentially. The instruction on the right is in
the right container and is executed second.
`abs r0 <- abs a1'
Execute these reverse-sequentially. The instruction on the right
is in the right container, and is executed first.
`ld2w r2,@r8+ || mac a0,r0,r7'
Execute these in parallel.
`ld2w r2,@r8+ ||'
`mac a0,r0,r7'
Two-line format. Execute these in parallel.
`ld2w r2,@r8+'
`mac a0,r0,r7'
Two-line format. Execute these sequentially. Assembler will put
them in the proper containers.
`ld2w r2,@r8+ ->'
`mac a0,r0,r7'
Two-line format. Execute these sequentially. Same as above but
second instruction will always go into right container.
Since `$' has no special meaning, you may use it in symbol names.
File: as.info, Node: D10V-Regs, Next: D10V-Addressing, Prev: D10V-Chars, Up: D10V-Syntax
8.6.2.4 Register Names
......................
You can use the predefined symbols `r0' through `r15' to refer to the
D10V registers. You can also use `sp' as an alias for `r15'. The
accumulators are `a0' and `a1'. There are special register-pair names
that may optionally be used in opcodes that require even-numbered
registers. Register names are not case sensitive.
Register Pairs
`r0-r1'
`r2-r3'
`r4-r5'
`r6-r7'
`r8-r9'
`r10-r11'
`r12-r13'
`r14-r15'
The D10V also has predefined symbols for these control registers and
status bits:
`psw'
Processor Status Word
`bpsw'
Backup Processor Status Word
`pc'
Program Counter
`bpc'
Backup Program Counter
`rpt_c'
Repeat Count
`rpt_s'
Repeat Start address
`rpt_e'
Repeat End address
`mod_s'
Modulo Start address
`mod_e'
Modulo End address
`iba'
Instruction Break Address
`f0'
Flag 0
`f1'
Flag 1
`c'
Carry flag
File: as.info, Node: D10V-Addressing, Next: D10V-Word, Prev: D10V-Regs, Up: D10V-Syntax
8.6.2.5 Addressing Modes
........................
`as' understands the following addressing modes for the D10V. `RN' in
the following refers to any of the numbered registers, but _not_ the
control registers.
`RN'
Register direct
`@RN'
Register indirect
`@RN+'
Register indirect with post-increment
`@RN-'
Register indirect with post-decrement
`@-SP'
Register indirect with pre-decrement
`@(DISP, RN)'
Register indirect with displacement
`ADDR'
PC relative address (for branch or rep).
`#IMM'
Immediate data (the `#' is optional and ignored)
File: as.info, Node: D10V-Word, Prev: D10V-Addressing, Up: D10V-Syntax
8.6.2.6 @WORD Modifier
......................
Any symbol followed by `@word' will be replaced by the symbol's value
shifted right by 2. This is used in situations such as loading a
register with the address of a function (or any other code fragment).
For example, if you want to load a register with the location of the
function `main' then jump to that function, you could do it as follows:
ldi r2, main@word
jmp r2
File: as.info, Node: D10V-Float, Next: D10V-Opcodes, Prev: D10V-Syntax, Up: D10V-Dependent
8.6.3 Floating Point
--------------------
The D10V has no hardware floating point, but the `.float' and `.double'
directives generates IEEE floating-point numbers for compatibility with
other development tools.
File: as.info, Node: D10V-Opcodes, Prev: D10V-Float, Up: D10V-Dependent
8.6.4 Opcodes
-------------
For detailed information on the D10V machine instruction set, see `D10V
Architecture: A VLIW Microprocessor for Multimedia Applications'
(Mitsubishi Electric Corp.). `as' implements all the standard D10V
opcodes. The only changes are those described in the section on size
modifiers
File: as.info, Node: D30V-Dependent, Next: H8/300-Dependent, Prev: D10V-Dependent, Up: Machine Dependencies
8.7 D30V Dependent Features
===========================
* Menu:
* D30V-Opts:: D30V Options
* D30V-Syntax:: Syntax
* D30V-Float:: Floating Point
* D30V-Opcodes:: Opcodes
File: as.info, Node: D30V-Opts, Next: D30V-Syntax, Up: D30V-Dependent
8.7.1 D30V Options
------------------
The Mitsubishi D30V version of `as' has a few machine dependent options.
`-O'
The D30V can often execute two sub-instructions in parallel. When
this option is used, `as' will attempt to optimize its output by
detecting when instructions can be executed in parallel.
`-n'
When this option is used, `as' will issue a warning every time it
adds a nop instruction.
`-N'
When this option is used, `as' will issue a warning if it needs to
insert a nop after a 32-bit multiply before a load or 16-bit
multiply instruction.
File: as.info, Node: D30V-Syntax, Next: D30V-Float, Prev: D30V-Opts, Up: D30V-Dependent
8.7.2 Syntax
------------
The D30V syntax is based on the syntax in Mitsubishi's D30V
architecture manual. The differences are detailed below.
* Menu:
* D30V-Size:: Size Modifiers
* D30V-Subs:: Sub-Instructions
* D30V-Chars:: Special Characters
* D30V-Guarded:: Guarded Execution
* D30V-Regs:: Register Names
* D30V-Addressing:: Addressing Modes
File: as.info, Node: D30V-Size, Next: D30V-Subs, Up: D30V-Syntax
8.7.2.1 Size Modifiers
......................
The D30V version of `as' uses the instruction names in the D30V
Architecture Manual. However, the names in the manual are sometimes
ambiguous. There are instruction names that can assemble to a short or
long form opcode. How does the assembler pick the correct form? `as'
will always pick the smallest form if it can. When dealing with a
symbol that is not defined yet when a line is being assembled, it will
always use the long form. If you need to force the assembler to use
either the short or long form of the instruction, you can append either
`.s' (short) or `.l' (long) to it. For example, if you are writing an
assembly program and you want to do a branch to a symbol that is
defined later in your program, you can write `bra.s foo'. Objdump and
GDB will always append `.s' or `.l' to instructions which have both
short and long forms.
File: as.info, Node: D30V-Subs, Next: D30V-Chars, Prev: D30V-Size, Up: D30V-Syntax
8.7.2.2 Sub-Instructions
........................
The D30V assembler takes as input a series of instructions, either
one-per-line, or in the special two-per-line format described in the
next section. Some of these instructions will be short-form or
sub-instructions. These sub-instructions can be packed into a single
instruction. The assembler will do this automatically. It will also
detect when it should not pack instructions. For example, when a label
is defined, the next instruction will never be packaged with the
previous one. Whenever a branch and link instruction is called, it
will not be packaged with the next instruction so the return address
will be valid. Nops are automatically inserted when necessary.
If you do not want the assembler automatically making these
decisions, you can control the packaging and execution type (parallel
or sequential) with the special execution symbols described in the next
section.
File: as.info, Node: D30V-Chars, Next: D30V-Guarded, Prev: D30V-Subs, Up: D30V-Syntax
8.7.2.3 Special Characters
..........................
`;' and `#' are the line comment characters. Sub-instructions may be
executed in order, in reverse-order, or in parallel. Instructions
listed in the standard one-per-line format will be executed
sequentially unless you use the `-O' option.
To specify the executing order, use the following symbols:
`->'
Sequential with instruction on the left first.
`<-'
Sequential with instruction on the right first.
`||'
Parallel
The D30V syntax allows either one instruction per line, one
instruction per line with the execution symbol, or two instructions per
line. For example
`abs r2,r3 -> abs r4,r5'
Execute these sequentially. The instruction on the right is in
the right container and is executed second.
`abs r2,r3 <- abs r4,r5'
Execute these reverse-sequentially. The instruction on the right
is in the right container, and is executed first.
`abs r2,r3 || abs r4,r5'
Execute these in parallel.
`ldw r2,@(r3,r4) ||'
`mulx r6,r8,r9'
Two-line format. Execute these in parallel.
`mulx a0,r8,r9'
`stw r2,@(r3,r4)'
Two-line format. Execute these sequentially unless `-O' option is
used. If the `-O' option is used, the assembler will determine if
the instructions could be done in parallel (the above two
instructions can be done in parallel), and if so, emit them as
parallel instructions. The assembler will put them in the proper
containers. In the above example, the assembler will put the
`stw' instruction in left container and the `mulx' instruction in
the right container.
`stw r2,@(r3,r4) ->'
`mulx a0,r8,r9'
Two-line format. Execute the `stw' instruction followed by the
`mulx' instruction sequentially. The first instruction goes in the
left container and the second instruction goes into right
container. The assembler will give an error if the machine
ordering constraints are violated.
`stw r2,@(r3,r4) <-'
`mulx a0,r8,r9'
Same as previous example, except that the `mulx' instruction is
executed before the `stw' instruction.
Since `$' has no special meaning, you may use it in symbol names.
File: as.info, Node: D30V-Guarded, Next: D30V-Regs, Prev: D30V-Chars, Up: D30V-Syntax
8.7.2.4 Guarded Execution
.........................
`as' supports the full range of guarded execution directives for each
instruction. Just append the directive after the instruction proper.
The directives are:
`/tx'
Execute the instruction if flag f0 is true.
`/fx'
Execute the instruction if flag f0 is false.
`/xt'
Execute the instruction if flag f1 is true.
`/xf'
Execute the instruction if flag f1 is false.
`/tt'
Execute the instruction if both flags f0 and f1 are true.
`/tf'
Execute the instruction if flag f0 is true and flag f1 is false.
File: as.info, Node: D30V-Regs, Next: D30V-Addressing, Prev: D30V-Guarded, Up: D30V-Syntax
8.7.2.5 Register Names
......................
You can use the predefined symbols `r0' through `r63' to refer to the
D30V registers. You can also use `sp' as an alias for `r63' and `link'
as an alias for `r62'. The accumulators are `a0' and `a1'.
The D30V also has predefined symbols for these control registers and
status bits:
`psw'
Processor Status Word
`bpsw'
Backup Processor Status Word
`pc'
Program Counter
`bpc'
Backup Program Counter
`rpt_c'
Repeat Count
`rpt_s'
Repeat Start address
`rpt_e'
Repeat End address
`mod_s'
Modulo Start address
`mod_e'
Modulo End address
`iba'
Instruction Break Address
`f0'
Flag 0
`f1'
Flag 1
`f2'
Flag 2
`f3'
Flag 3
`f4'
Flag 4
`f5'
Flag 5
`f6'
Flag 6
`f7'
Flag 7
`s'
Same as flag 4 (saturation flag)
`v'
Same as flag 5 (overflow flag)
`va'
Same as flag 6 (sticky overflow flag)
`c'
Same as flag 7 (carry/borrow flag)
`b'
Same as flag 7 (carry/borrow flag)
File: as.info, Node: D30V-Addressing, Prev: D30V-Regs, Up: D30V-Syntax
8.7.2.6 Addressing Modes
........................
`as' understands the following addressing modes for the D30V. `RN' in
the following refers to any of the numbered registers, but _not_ the
control registers.
`RN'
Register direct
`@RN'
Register indirect
`@RN+'
Register indirect with post-increment
`@RN-'
Register indirect with post-decrement
`@-SP'
Register indirect with pre-decrement
`@(DISP, RN)'
Register indirect with displacement
`ADDR'
PC relative address (for branch or rep).
`#IMM'
Immediate data (the `#' is optional and ignored)
File: as.info, Node: D30V-Float, Next: D30V-Opcodes, Prev: D30V-Syntax, Up: D30V-Dependent
8.7.3 Floating Point
--------------------
The D30V has no hardware floating point, but the `.float' and `.double'
directives generates IEEE floating-point numbers for compatibility with
other development tools.
File: as.info, Node: D30V-Opcodes, Prev: D30V-Float, Up: D30V-Dependent
8.7.4 Opcodes
-------------
For detailed information on the D30V machine instruction set, see `D30V
Architecture: A VLIW Microprocessor for Multimedia Applications'
(Mitsubishi Electric Corp.). `as' implements all the standard D30V
opcodes. The only changes are those described in the section on size
modifiers
File: as.info, Node: H8/300-Dependent, Next: HPPA-Dependent, Prev: D30V-Dependent, Up: Machine Dependencies
8.8 H8/300 Dependent Features
=============================
* Menu:
* H8/300 Options:: Options
* H8/300 Syntax:: Syntax
* H8/300 Floating Point:: Floating Point
* H8/300 Directives:: H8/300 Machine Directives
* H8/300 Opcodes:: Opcodes
File: as.info, Node: H8/300 Options, Next: H8/300 Syntax, Up: H8/300-Dependent
8.8.1 Options
-------------
`as' has no additional command-line options for the Renesas (formerly
Hitachi) H8/300 family.
File: as.info, Node: H8/300 Syntax, Next: H8/300 Floating Point, Prev: H8/300 Options, Up: H8/300-Dependent
8.8.2 Syntax
------------
* Menu:
* H8/300-Chars:: Special Characters
* H8/300-Regs:: Register Names
* H8/300-Addressing:: Addressing Modes
File: as.info, Node: H8/300-Chars, Next: H8/300-Regs, Up: H8/300 Syntax
8.8.2.1 Special Characters
..........................
`;' is the line comment character.
`$' can be used instead of a newline to separate statements.
Therefore _you may not use `$' in symbol names_ on the H8/300.
File: as.info, Node: H8/300-Regs, Next: H8/300-Addressing, Prev: H8/300-Chars, Up: H8/300 Syntax
8.8.2.2 Register Names
......................
You can use predefined symbols of the form `rNh' and `rNl' to refer to
the H8/300 registers as sixteen 8-bit general-purpose registers. N is
a digit from `0' to `7'); for instance, both `r0h' and `r7l' are valid
register names.
You can also use the eight predefined symbols `rN' to refer to the
H8/300 registers as 16-bit registers (you must use this form for
addressing).
On the H8/300H, you can also use the eight predefined symbols `erN'
(`er0' ... `er7') to refer to the 32-bit general purpose registers.
The two control registers are called `pc' (program counter; a 16-bit
register, except on the H8/300H where it is 24 bits) and `ccr'
(condition code register; an 8-bit register). `r7' is used as the
stack pointer, and can also be called `sp'.
File: as.info, Node: H8/300-Addressing, Prev: H8/300-Regs, Up: H8/300 Syntax
8.8.2.3 Addressing Modes
........................
as understands the following addressing modes for the H8/300:
`rN'
Register direct
`@rN'
Register indirect
`@(D, rN)'
`@(D:16, rN)'
`@(D:24, rN)'
Register indirect: 16-bit or 24-bit displacement D from register
N. (24-bit displacements are only meaningful on the H8/300H.)
`@rN+'
Register indirect with post-increment
`@-rN'
Register indirect with pre-decrement
``@'AA'
``@'AA:8'
``@'AA:16'
``@'AA:24'
Absolute address `aa'. (The address size `:24' only makes sense
on the H8/300H.)
`#XX'
`#XX:8'
`#XX:16'
`#XX:32'
Immediate data XX. You may specify the `:8', `:16', or `:32' for
clarity, if you wish; but `as' neither requires this nor uses
it--the data size required is taken from context.
``@'`@'AA'
``@'`@'AA:8'
Memory indirect. You may specify the `:8' for clarity, if you
wish; but `as' neither requires this nor uses it.
File: as.info, Node: H8/300 Floating Point, Next: H8/300 Directives, Prev: H8/300 Syntax, Up: H8/300-Dependent
8.8.3 Floating Point
--------------------
The H8/300 family has no hardware floating point, but the `.float'
directive generates IEEE floating-point numbers for compatibility with
other development tools.
File: as.info, Node: H8/300 Directives, Next: H8/300 Opcodes, Prev: H8/300 Floating Point, Up: H8/300-Dependent
8.8.4 H8/300 Machine Directives
-------------------------------
`as' has the following machine-dependent directives for the H8/300:
`.h8300h'
Recognize and emit additional instructions for the H8/300H
variant, and also make `.int' emit 32-bit numbers rather than the
usual (16-bit) for the H8/300 family.
`.h8300s'
Recognize and emit additional instructions for the H8S variant, and
also make `.int' emit 32-bit numbers rather than the usual (16-bit)
for the H8/300 family.
`.h8300hn'
Recognize and emit additional instructions for the H8/300H variant
in normal mode, and also make `.int' emit 32-bit numbers rather
than the usual (16-bit) for the H8/300 family.
`.h8300sn'
Recognize and emit additional instructions for the H8S variant in
normal mode, and also make `.int' emit 32-bit numbers rather than
the usual (16-bit) for the H8/300 family.
On the H8/300 family (including the H8/300H) `.word' directives
generate 16-bit numbers.
File: as.info, Node: H8/300 Opcodes, Prev: H8/300 Directives, Up: H8/300-Dependent
8.8.5 Opcodes
-------------
For detailed information on the H8/300 machine instruction set, see
`H8/300 Series Programming Manual'. For information specific to the
H8/300H, see `H8/300H Series Programming Manual' (Renesas).
`as' implements all the standard H8/300 opcodes. No additional
pseudo-instructions are needed on this family.
The following table summarizes the H8/300 opcodes, and their
arguments. Entries marked `*' are opcodes used only on the H8/300H.
Legend:
Rs source register
Rd destination register
abs absolute address
imm immediate data
disp:N N-bit displacement from a register
pcrel:N N-bit displacement relative to program counter
add.b #imm,rd * andc #imm,ccr
add.b rs,rd band #imm,rd
add.w rs,rd band #imm,@rd
* add.w #imm,rd band #imm,@abs:8
* add.l rs,rd bra pcrel:8
* add.l #imm,rd * bra pcrel:16
adds #imm,rd bt pcrel:8
addx #imm,rd * bt pcrel:16
addx rs,rd brn pcrel:8
and.b #imm,rd * brn pcrel:16
and.b rs,rd bf pcrel:8
* and.w rs,rd * bf pcrel:16
* and.w #imm,rd bhi pcrel:8
* and.l #imm,rd * bhi pcrel:16
* and.l rs,rd bls pcrel:8
* bls pcrel:16 bld #imm,rd
bcc pcrel:8 bld #imm,@rd
* bcc pcrel:16 bld #imm,@abs:8
bhs pcrel:8 bnot #imm,rd
* bhs pcrel:16 bnot #imm,@rd
bcs pcrel:8 bnot #imm,@abs:8
* bcs pcrel:16 bnot rs,rd
blo pcrel:8 bnot rs,@rd
* blo pcrel:16 bnot rs,@abs:8
bne pcrel:8 bor #imm,rd
* bne pcrel:16 bor #imm,@rd
beq pcrel:8 bor #imm,@abs:8
* beq pcrel:16 bset #imm,rd
bvc pcrel:8 bset #imm,@rd
* bvc pcrel:16 bset #imm,@abs:8
bvs pcrel:8 bset rs,rd
* bvs pcrel:16 bset rs,@rd
bpl pcrel:8 bset rs,@abs:8
* bpl pcrel:16 bsr pcrel:8
bmi pcrel:8 bsr pcrel:16
* bmi pcrel:16 bst #imm,rd
bge pcrel:8 bst #imm,@rd
* bge pcrel:16 bst #imm,@abs:8
blt pcrel:8 btst #imm,rd
* blt pcrel:16 btst #imm,@rd
bgt pcrel:8 btst #imm,@abs:8
* bgt pcrel:16 btst rs,rd
ble pcrel:8 btst rs,@rd
* ble pcrel:16 btst rs,@abs:8
bclr #imm,rd bxor #imm,rd
bclr #imm,@rd bxor #imm,@rd
bclr #imm,@abs:8 bxor #imm,@abs:8
bclr rs,rd cmp.b #imm,rd
bclr rs,@rd cmp.b rs,rd
bclr rs,@abs:8 cmp.w rs,rd
biand #imm,rd cmp.w rs,rd
biand #imm,@rd * cmp.w #imm,rd
biand #imm,@abs:8 * cmp.l #imm,rd
bild #imm,rd * cmp.l rs,rd
bild #imm,@rd daa rs
bild #imm,@abs:8 das rs
bior #imm,rd dec.b rs
bior #imm,@rd * dec.w #imm,rd
bior #imm,@abs:8 * dec.l #imm,rd
bist #imm,rd divxu.b rs,rd
bist #imm,@rd * divxu.w rs,rd
bist #imm,@abs:8 * divxs.b rs,rd
bixor #imm,rd * divxs.w rs,rd
bixor #imm,@rd eepmov
bixor #imm,@abs:8 * eepmovw
* exts.w rd mov.w rs,@abs:16
* exts.l rd * mov.l #imm,rd
* extu.w rd * mov.l rs,rd
* extu.l rd * mov.l @rs,rd
inc rs * mov.l @(disp:16,rs),rd
* inc.w #imm,rd * mov.l @(disp:24,rs),rd
* inc.l #imm,rd * mov.l @rs+,rd
jmp @rs * mov.l @abs:16,rd
jmp abs * mov.l @abs:24,rd
jmp @@abs:8 * mov.l rs,@rd
jsr @rs * mov.l rs,@(disp:16,rd)
jsr abs * mov.l rs,@(disp:24,rd)
jsr @@abs:8 * mov.l rs,@-rd
ldc #imm,ccr * mov.l rs,@abs:16
ldc rs,ccr * mov.l rs,@abs:24
* ldc @abs:16,ccr movfpe @abs:16,rd
* ldc @abs:24,ccr movtpe rs,@abs:16
* ldc @(disp:16,rs),ccr mulxu.b rs,rd
* ldc @(disp:24,rs),ccr * mulxu.w rs,rd
* ldc @rs+,ccr * mulxs.b rs,rd
* ldc @rs,ccr * mulxs.w rs,rd
* mov.b @(disp:24,rs),rd neg.b rs
* mov.b rs,@(disp:24,rd) * neg.w rs
mov.b @abs:16,rd * neg.l rs
mov.b rs,rd nop
mov.b @abs:8,rd not.b rs
mov.b rs,@abs:8 * not.w rs
mov.b rs,rd * not.l rs
mov.b #imm,rd or.b #imm,rd
mov.b @rs,rd or.b rs,rd
mov.b @(disp:16,rs),rd * or.w #imm,rd
mov.b @rs+,rd * or.w rs,rd
mov.b @abs:8,rd * or.l #imm,rd
mov.b rs,@rd * or.l rs,rd
mov.b rs,@(disp:16,rd) orc #imm,ccr
mov.b rs,@-rd pop.w rs
mov.b rs,@abs:8 * pop.l rs
mov.w rs,@rd push.w rs
* mov.w @(disp:24,rs),rd * push.l rs
* mov.w rs,@(disp:24,rd) rotl.b rs
* mov.w @abs:24,rd * rotl.w rs
* mov.w rs,@abs:24 * rotl.l rs
mov.w rs,rd rotr.b rs
mov.w #imm,rd * rotr.w rs
mov.w @rs,rd * rotr.l rs
mov.w @(disp:16,rs),rd rotxl.b rs
mov.w @rs+,rd * rotxl.w rs
mov.w @abs:16,rd * rotxl.l rs
mov.w rs,@(disp:16,rd) rotxr.b rs
mov.w rs,@-rd * rotxr.w rs
* rotxr.l rs * stc ccr,@(disp:24,rd)
bpt * stc ccr,@-rd
rte * stc ccr,@abs:16
rts * stc ccr,@abs:24
shal.b rs sub.b rs,rd
* shal.w rs sub.w rs,rd
* shal.l rs * sub.w #imm,rd
shar.b rs * sub.l rs,rd
* shar.w rs * sub.l #imm,rd
* shar.l rs subs #imm,rd
shll.b rs subx #imm,rd
* shll.w rs subx rs,rd
* shll.l rs * trapa #imm
shlr.b rs xor #imm,rd
* shlr.w rs xor rs,rd
* shlr.l rs * xor.w #imm,rd
sleep * xor.w rs,rd
stc ccr,rd * xor.l #imm,rd
* stc ccr,@rs * xor.l rs,rd
* stc ccr,@(disp:16,rd) xorc #imm,ccr
Four H8/300 instructions (`add', `cmp', `mov', `sub') are defined
with variants using the suffixes `.b', `.w', and `.l' to specify the
size of a memory operand. `as' supports these suffixes, but does not
require them; since one of the operands is always a register, `as' can
deduce the correct size.
For example, since `r0' refers to a 16-bit register,
mov r0,@foo
is equivalent to
mov.w r0,@foo
If you use the size suffixes, `as' issues a warning when the suffix
and the register size do not match.
File: as.info, Node: HPPA-Dependent, Next: ESA/390-Dependent, Prev: H8/300-Dependent, Up: Machine Dependencies
8.9 HPPA Dependent Features
===========================
* Menu:
* HPPA Notes:: Notes
* HPPA Options:: Options
* HPPA Syntax:: Syntax
* HPPA Floating Point:: Floating Point
* HPPA Directives:: HPPA Machine Directives
* HPPA Opcodes:: Opcodes
File: as.info, Node: HPPA Notes, Next: HPPA Options, Up: HPPA-Dependent
8.9.1 Notes
-----------
As a back end for GNU CC `as' has been throughly tested and should work
extremely well. We have tested it only minimally on hand written
assembly code and no one has tested it much on the assembly output from
the HP compilers.
The format of the debugging sections has changed since the original
`as' port (version 1.3X) was released; therefore, you must rebuild all
HPPA objects and libraries with the new assembler so that you can debug
the final executable.
The HPPA `as' port generates a small subset of the relocations
available in the SOM and ELF object file formats. Additional relocation
support will be added as it becomes necessary.
File: as.info, Node: HPPA Options, Next: HPPA Syntax, Prev: HPPA Notes, Up: HPPA-Dependent
8.9.2 Options
-------------
`as' has no machine-dependent command-line options for the HPPA.
File: as.info, Node: HPPA Syntax, Next: HPPA Floating Point, Prev: HPPA Options, Up: HPPA-Dependent
8.9.3 Syntax
------------
The assembler syntax closely follows the HPPA instruction set reference
manual; assembler directives and general syntax closely follow the HPPA
assembly language reference manual, with a few noteworthy differences.
First, a colon may immediately follow a label definition. This is
simply for compatibility with how most assembly language programmers
write code.
Some obscure expression parsing problems may affect hand written
code which uses the `spop' instructions, or code which makes significant
use of the `!' line separator.
`as' is much less forgiving about missing arguments and other
similar oversights than the HP assembler. `as' notifies you of missing
arguments as syntax errors; this is regarded as a feature, not a bug.
Finally, `as' allows you to use an external symbol without
explicitly importing the symbol. _Warning:_ in the future this will be
an error for HPPA targets.
Special characters for HPPA targets include:
`;' is the line comment character.
`!' can be used instead of a newline to separate statements.
Since `$' has no special meaning, you may use it in symbol names.
File: as.info, Node: HPPA Floating Point, Next: HPPA Directives, Prev: HPPA Syntax, Up: HPPA-Dependent
8.9.4 Floating Point
--------------------
The HPPA family uses IEEE floating-point numbers.
File: as.info, Node: HPPA Directives, Next: HPPA Opcodes, Prev: HPPA Floating Point, Up: HPPA-Dependent
8.9.5 HPPA Assembler Directives
-------------------------------
`as' for the HPPA supports many additional directives for compatibility
with the native assembler. This section describes them only briefly.
For detailed information on HPPA-specific assembler directives, see
`HP9000 Series 800 Assembly Language Reference Manual' (HP 92432-90001).
`as' does _not_ support the following assembler directives described
in the HP manual:
.endm .liston
.enter .locct
.leave .macro
.listoff
Beyond those implemented for compatibility, `as' supports one
additional assembler directive for the HPPA: `.param'. It conveys
register argument locations for static functions. Its syntax closely
follows the `.export' directive.
These are the additional directives in `as' for the HPPA:
`.block N'
`.blockz N'
Reserve N bytes of storage, and initialize them to zero.
`.call'
Mark the beginning of a procedure call. Only the special case
with _no arguments_ is allowed.
`.callinfo [ PARAM=VALUE, ... ] [ FLAG, ... ]'
Specify a number of parameters and flags that define the
environment for a procedure.
PARAM may be any of `frame' (frame size), `entry_gr' (end of
general register range), `entry_fr' (end of float register range),
`entry_sr' (end of space register range).
The values for FLAG are `calls' or `caller' (proc has
subroutines), `no_calls' (proc does not call subroutines),
`save_rp' (preserve return pointer), `save_sp' (proc preserves
stack pointer), `no_unwind' (do not unwind this proc), `hpux_int'
(proc is interrupt routine).
`.code'
Assemble into the standard section called `$TEXT$', subsection
`$CODE$'.
`.copyright "STRING"'
In the SOM object format, insert STRING into the object code,
marked as a copyright string.
`.copyright "STRING"'
In the ELF object format, insert STRING into the object code,
marked as a version string.
`.enter'
Not yet supported; the assembler rejects programs containing this
directive.
`.entry'
Mark the beginning of a procedure.
`.exit'
Mark the end of a procedure.
`.export NAME [ ,TYP ] [ ,PARAM=R ]'
Make a procedure NAME available to callers. TYP, if present, must
be one of `absolute', `code' (ELF only, not SOM), `data', `entry',
`data', `entry', `millicode', `plabel', `pri_prog', or `sec_prog'.
PARAM, if present, provides either relocation information for the
procedure arguments and result, or a privilege level. PARAM may be
`argwN' (where N ranges from `0' to `3', and indicates one of four
one-word arguments); `rtnval' (the procedure's result); or
`priv_lev' (privilege level). For arguments or the result, R
specifies how to relocate, and must be one of `no' (not
relocatable), `gr' (argument is in general register), `fr' (in
floating point register), or `fu' (upper half of float register).
For `priv_lev', R is an integer.
`.half N'
Define a two-byte integer constant N; synonym for the portable
`as' directive `.short'.
`.import NAME [ ,TYP ]'
Converse of `.export'; make a procedure available to call. The
arguments use the same conventions as the first two arguments for
`.export'.
`.label NAME'
Define NAME as a label for the current assembly location.
`.leave'
Not yet supported; the assembler rejects programs containing this
directive.
`.origin LC'
Advance location counter to LC. Synonym for the `as' portable
directive `.org'.
`.param NAME [ ,TYP ] [ ,PARAM=R ]'
Similar to `.export', but used for static procedures.
`.proc'
Use preceding the first statement of a procedure.
`.procend'
Use following the last statement of a procedure.
`LABEL .reg EXPR'
Synonym for `.equ'; define LABEL with the absolute expression EXPR
as its value.
`.space SECNAME [ ,PARAMS ]'
Switch to section SECNAME, creating a new section by that name if
necessary. You may only use PARAMS when creating a new section,
not when switching to an existing one. SECNAME may identify a
section by number rather than by name.
If specified, the list PARAMS declares attributes of the section,
identified by keywords. The keywords recognized are `spnum=EXP'
(identify this section by the number EXP, an absolute expression),
`sort=EXP' (order sections according to this sort key when linking;
EXP is an absolute expression), `unloadable' (section contains no
loadable data), `notdefined' (this section defined elsewhere), and
`private' (data in this section not available to other programs).
`.spnum SECNAM'
Allocate four bytes of storage, and initialize them with the
section number of the section named SECNAM. (You can define the
section number with the HPPA `.space' directive.)
`.string "STR"'
Copy the characters in the string STR to the object file. *Note
Strings: Strings, for information on escape sequences you can use
in `as' strings.
_Warning!_ The HPPA version of `.string' differs from the usual
`as' definition: it does _not_ write a zero byte after copying STR.
`.stringz "STR"'
Like `.string', but appends a zero byte after copying STR to object
file.
`.subspa NAME [ ,PARAMS ]'
`.nsubspa NAME [ ,PARAMS ]'
Similar to `.space', but selects a subsection NAME within the
current section. You may only specify PARAMS when you create a
subsection (in the first instance of `.subspa' for this NAME).
If specified, the list PARAMS declares attributes of the
subsection, identified by keywords. The keywords recognized are
`quad=EXPR' ("quadrant" for this subsection), `align=EXPR'
(alignment for beginning of this subsection; a power of two),
`access=EXPR' (value for "access rights" field), `sort=EXPR'
(sorting order for this subspace in link), `code_only' (subsection
contains only code), `unloadable' (subsection cannot be loaded
into memory), `comdat' (subsection is comdat), `common'
(subsection is common block), `dup_comm' (subsection may have
duplicate names), or `zero' (subsection is all zeros, do not write
in object file).
`.nsubspa' always creates a new subspace with the given name, even
if one with the same name already exists.
`comdat', `common' and `dup_comm' can be used to implement various
flavors of one-only support when using the SOM linker. The SOM
linker only supports specific combinations of these flags. The
details are not documented. A brief description is provided here.
`comdat' provides a form of linkonce support. It is useful for
both code and data subspaces. A `comdat' subspace has a key symbol
marked by the `is_comdat' flag or `ST_COMDAT'. Only the first
subspace for any given key is selected. The key symbol becomes
universal in shared links. This is similar to the behavior of
`secondary_def' symbols.
`common' provides Fortran named common support. It is only useful
for data subspaces. Symbols with the flag `is_common' retain this
flag in shared links. Referencing a `is_common' symbol in a shared
library from outside the library doesn't work. Thus, `is_common'
symbols must be output whenever they are needed.
`common' and `dup_comm' together provide Cobol common support.
The subspaces in this case must all be the same length.
Otherwise, this support is similar to the Fortran common support.
`dup_comm' by itself provides a type of one-only support for code.
Only the first `dup_comm' subspace is selected. There is a rather
complex algorithm to compare subspaces. Code symbols marked with
the `dup_common' flag are hidden. This support was intended for
"C++ duplicate inlines".
A simplified technique is used to mark the flags of symbols based
on the flags of their subspace. A symbol with the scope
SS_UNIVERSAL and type ST_ENTRY, ST_CODE or ST_DATA is marked with
the corresponding settings of `comdat', `common' and `dup_comm'
from the subspace, respectively. This avoids having to introduce
additional directives to mark these symbols. The HP assembler
sets `is_common' from `common'. However, it doesn't set the
`dup_common' from `dup_comm'. It doesn't have `comdat' support.
`.version "STR"'
Write STR as version identifier in object code.
File: as.info, Node: HPPA Opcodes, Prev: HPPA Directives, Up: HPPA-Dependent
8.9.6 Opcodes
-------------
For detailed information on the HPPA machine instruction set, see
`PA-RISC Architecture and Instruction Set Reference Manual' (HP
09740-90039).
File: as.info, Node: ESA/390-Dependent, Next: i386-Dependent, Prev: HPPA-Dependent, Up: Machine Dependencies
8.10 ESA/390 Dependent Features
===============================
* Menu:
* ESA/390 Notes:: Notes
* ESA/390 Options:: Options
* ESA/390 Syntax:: Syntax
* ESA/390 Floating Point:: Floating Point
* ESA/390 Directives:: ESA/390 Machine Directives
* ESA/390 Opcodes:: Opcodes
File: as.info, Node: ESA/390 Notes, Next: ESA/390 Options, Up: ESA/390-Dependent
8.10.1 Notes
------------
The ESA/390 `as' port is currently intended to be a back-end for the
GNU CC compiler. It is not HLASM compatible, although it does support
a subset of some of the HLASM directives. The only supported binary
file format is ELF; none of the usual MVS/VM/OE/USS object file
formats, such as ESD or XSD, are supported.
When used with the GNU CC compiler, the ESA/390 `as' will produce
correct, fully relocated, functional binaries, and has been used to
compile and execute large projects. However, many aspects should still
be considered experimental; these include shared library support,
dynamically loadable objects, and any relocation other than the 31-bit
relocation.
File: as.info, Node: ESA/390 Options, Next: ESA/390 Syntax, Prev: ESA/390 Notes, Up: ESA/390-Dependent
8.10.2 Options
--------------
`as' has no machine-dependent command-line options for the ESA/390.
File: as.info, Node: ESA/390 Syntax, Next: ESA/390 Floating Point, Prev: ESA/390 Options, Up: ESA/390-Dependent
8.10.3 Syntax
-------------
The opcode/operand syntax follows the ESA/390 Principles of Operation
manual; assembler directives and general syntax are loosely based on the
prevailing AT&T/SVR4/ELF/Solaris style notation. HLASM-style directives
are _not_ supported for the most part, with the exception of those
described herein.
A leading dot in front of directives is optional, and the case of
directives is ignored; thus for example, .using and USING have the same
effect.
A colon may immediately follow a label definition. This is simply
for compatibility with how most assembly language programmers write
code.
`#' is the line comment character.
`;' can be used instead of a newline to separate statements.
Since `$' has no special meaning, you may use it in symbol names.
Registers can be given the symbolic names r0..r15, fp0, fp2, fp4,
fp6. By using thesse symbolic names, `as' can detect simple syntax
errors. The name rarg or r.arg is a synonym for r11, rtca or r.tca for
r12, sp, r.sp, dsa r.dsa for r13, lr or r.lr for r14, rbase or r.base
for r3 and rpgt or r.pgt for r4.
`*' is the current location counter. Unlike `.' it is always
relative to the last USING directive. Note that this means that
expressions cannot use multiplication, as any occurrence of `*' will be
interpreted as a location counter.
All labels are relative to the last USING. Thus, branches to a label
always imply the use of base+displacement.
Many of the usual forms of address constants / address literals are
supported. Thus,
.using *,r3
L r15,=A(some_routine)
LM r6,r7,=V(some_longlong_extern)
A r1,=F'12'
AH r0,=H'42'
ME r6,=E'3.1416'
MD r6,=D'3.14159265358979'
O r6,=XL4'cacad0d0'
.ltorg
should all behave as expected: that is, an entry in the literal pool
will be created (or reused if it already exists), and the instruction
operands will be the displacement into the literal pool using the
current base register (as last declared with the `.using' directive).
File: as.info, Node: ESA/390 Floating Point, Next: ESA/390 Directives, Prev: ESA/390 Syntax, Up: ESA/390-Dependent
8.10.4 Floating Point
---------------------
The assembler generates only IEEE floating-point numbers. The older
floating point formats are not supported.
File: as.info, Node: ESA/390 Directives, Next: ESA/390 Opcodes, Prev: ESA/390 Floating Point, Up: ESA/390-Dependent
8.10.5 ESA/390 Assembler Directives
-----------------------------------
`as' for the ESA/390 supports all of the standard ELF/SVR4 assembler
directives that are documented in the main part of this documentation.
Several additional directives are supported in order to implement the
ESA/390 addressing model. The most important of these are `.using' and
`.ltorg'
These are the additional directives in `as' for the ESA/390:
`.dc'
A small subset of the usual DC directive is supported.
`.drop REGNO'
Stop using REGNO as the base register. The REGNO must have been
previously declared with a `.using' directive in the same section
as the current section.
`.ebcdic STRING'
Emit the EBCDIC equivalent of the indicated string. The emitted
string will be null terminated. Note that the directives
`.string' etc. emit ascii strings by default.
`EQU'
The standard HLASM-style EQU directive is not supported; however,
the standard `as' directive .equ can be used to the same effect.
`.ltorg'
Dump the literal pool accumulated so far; begin a new literal pool.
The literal pool will be written in the current section; in order
to generate correct assembly, a `.using' must have been previously
specified in the same section.
`.using EXPR,REGNO'
Use REGNO as the base register for all subsequent RX, RS, and SS
form instructions. The EXPR will be evaluated to obtain the base
address; usually, EXPR will merely be `*'.
This assembler allows two `.using' directives to be simultaneously
outstanding, one in the `.text' section, and one in another section
(typically, the `.data' section). This feature allows dynamically
loaded objects to be implemented in a relatively straightforward
way. A `.using' directive must always be specified in the `.text'
section; this will specify the base register that will be used for
branches in the `.text' section. A second `.using' may be
specified in another section; this will specify the base register
that is used for non-label address literals. When a second
`.using' is specified, then the subsequent `.ltorg' must be put in
the same section; otherwise an error will result.
Thus, for example, the following code uses `r3' to address branch
targets and `r4' to address the literal pool, which has been
written to the `.data' section. The is, the constants
`=A(some_routine)', `=H'42'' and `=E'3.1416'' will all appear in
the `.data' section.
.data
.using LITPOOL,r4
.text
BASR r3,0
.using *,r3
B START
.long LITPOOL
START:
L r4,4(,r3)
L r15,=A(some_routine)
LTR r15,r15
BNE LABEL
AH r0,=H'42'
LABEL:
ME r6,=E'3.1416'
.data
LITPOOL:
.ltorg
Note that this dual-`.using' directive semantics extends and is
not compatible with HLASM semantics. Note that this assembler
directive does not support the full range of HLASM semantics.
File: as.info, Node: ESA/390 Opcodes, Prev: ESA/390 Directives, Up: ESA/390-Dependent
8.10.6 Opcodes
--------------
For detailed information on the ESA/390 machine instruction set, see
`ESA/390 Principles of Operation' (IBM Publication Number DZ9AR004).
File: as.info, Node: i386-Dependent, Next: i860-Dependent, Prev: ESA/390-Dependent, Up: Machine Dependencies
8.11 80386 Dependent Features
=============================
The i386 version `as' supports both the original Intel 386
architecture in both 16 and 32-bit mode as well as AMD x86-64
architecture extending the Intel architecture to 64-bits.
* Menu:
* i386-Options:: Options
* i386-Syntax:: AT&T Syntax versus Intel Syntax
* i386-Mnemonics:: Instruction Naming
* i386-Regs:: Register Naming
* i386-Prefixes:: Instruction Prefixes
* i386-Memory:: Memory References
* i386-Jumps:: Handling of Jump Instructions
* i386-Float:: Floating Point
* i386-SIMD:: Intel's MMX and AMD's 3DNow! SIMD Operations
* i386-16bit:: Writing 16-bit Code
* i386-Arch:: Specifying an x86 CPU architecture
* i386-Bugs:: AT&T Syntax bugs
* i386-Notes:: Notes
File: as.info, Node: i386-Options, Next: i386-Syntax, Up: i386-Dependent
8.11.1 Options
--------------
The i386 version of `as' has a few machine dependent options:
`--32 | --64'
Select the word size, either 32 bits or 64 bits. Selecting 32-bit
implies Intel i386 architecture, while 64-bit implies AMD x86-64
architecture.
These options are only available with the ELF object file format,
and require that the necessary BFD support has been included (on a
32-bit platform you have to add -enable-64-bit-bfd to configure
enable 64-bit usage and use x86-64 as target platform).
`-n'
By default, x86 GAS replaces multiple nop instructions used for
alignment within code sections with multi-byte nop instructions
such as leal 0(%esi,1),%esi. This switch disables the
optimization.
`--divide'
On SVR4-derived platforms, the character `/' is treated as a
comment character, which means that it cannot be used in
expressions. The `--divide' option turns `/' into a normal
character. This does not disable `/' at the beginning of a line
starting a comment, or affect using `#' for starting a comment.
File: as.info, Node: i386-Syntax, Next: i386-Mnemonics, Prev: i386-Options, Up: i386-Dependent
8.11.2 AT&T Syntax versus Intel Syntax
--------------------------------------
`as' now supports assembly using Intel assembler syntax.
`.intel_syntax' selects Intel mode, and `.att_syntax' switches back to
the usual AT&T mode for compatibility with the output of `gcc'. Either
of these directives may have an optional argument, `prefix', or
`noprefix' specifying whether registers require a `%' prefix. AT&T
System V/386 assembler syntax is quite different from Intel syntax. We
mention these differences because almost all 80386 documents use Intel
syntax. Notable differences between the two syntaxes are:
* AT&T immediate operands are preceded by `$'; Intel immediate
operands are undelimited (Intel `push 4' is AT&T `pushl $4').
AT&T register operands are preceded by `%'; Intel register operands
are undelimited. AT&T absolute (as opposed to PC relative)
jump/call operands are prefixed by `*'; they are undelimited in
Intel syntax.
* AT&T and Intel syntax use the opposite order for source and
destination operands. Intel `add eax, 4' is `addl $4, %eax'. The
`source, dest' convention is maintained for compatibility with
previous Unix assemblers. Note that instructions with more than
one source operand, such as the `enter' instruction, do _not_ have
reversed order. *Note i386-Bugs::.
* In AT&T syntax the size of memory operands is determined from the
last character of the instruction mnemonic. Mnemonic suffixes of
`b', `w', `l' and `q' specify byte (8-bit), word (16-bit), long
(32-bit) and quadruple word (64-bit) memory references. Intel
syntax accomplishes this by prefixing memory operands (_not_ the
instruction mnemonics) with `byte ptr', `word ptr', `dword ptr'
and `qword ptr'. Thus, Intel `mov al, byte ptr FOO' is `movb FOO,
%al' in AT&T syntax.
* Immediate form long jumps and calls are `lcall/ljmp $SECTION,
$OFFSET' in AT&T syntax; the Intel syntax is `call/jmp far
SECTION:OFFSET'. Also, the far return instruction is `lret
$STACK-ADJUST' in AT&T syntax; Intel syntax is `ret far
STACK-ADJUST'.
* The AT&T assembler does not provide support for multiple section
programs. Unix style systems expect all programs to be single
sections.
File: as.info, Node: i386-Mnemonics, Next: i386-Regs, Prev: i386-Syntax, Up: i386-Dependent
8.11.3 Instruction Naming
-------------------------
Instruction mnemonics are suffixed with one character modifiers which
specify the size of operands. The letters `b', `w', `l' and `q'
specify byte, word, long and quadruple word operands. If no suffix is
specified by an instruction then `as' tries to fill in the missing
suffix based on the destination register operand (the last one by
convention). Thus, `mov %ax, %bx' is equivalent to `movw %ax, %bx';
also, `mov $1, %bx' is equivalent to `movw $1, bx'. Note that this is
incompatible with the AT&T Unix assembler which assumes that a missing
mnemonic suffix implies long operand size. (This incompatibility does
not affect compiler output since compilers always explicitly specify
the mnemonic suffix.)
Almost all instructions have the same names in AT&T and Intel format.
There are a few exceptions. The sign extend and zero extend
instructions need two sizes to specify them. They need a size to
sign/zero extend _from_ and a size to zero extend _to_. This is
accomplished by using two instruction mnemonic suffixes in AT&T syntax.
Base names for sign extend and zero extend are `movs...' and `movz...'
in AT&T syntax (`movsx' and `movzx' in Intel syntax). The instruction
mnemonic suffixes are tacked on to this base name, the _from_ suffix
before the _to_ suffix. Thus, `movsbl %al, %edx' is AT&T syntax for
"move sign extend _from_ %al _to_ %edx." Possible suffixes, thus, are
`bl' (from byte to long), `bw' (from byte to word), `wl' (from word to
long), `bq' (from byte to quadruple word), `wq' (from word to quadruple
word), and `lq' (from long to quadruple word).
The Intel-syntax conversion instructions
* `cbw' -- sign-extend byte in `%al' to word in `%ax',
* `cwde' -- sign-extend word in `%ax' to long in `%eax',
* `cwd' -- sign-extend word in `%ax' to long in `%dx:%ax',
* `cdq' -- sign-extend dword in `%eax' to quad in `%edx:%eax',
* `cdqe' -- sign-extend dword in `%eax' to quad in `%rax' (x86-64
only),
* `cqo' -- sign-extend quad in `%rax' to octuple in `%rdx:%rax'
(x86-64 only),
are called `cbtw', `cwtl', `cwtd', `cltd', `cltq', and `cqto' in AT&T
naming. `as' accepts either naming for these instructions.
Far call/jump instructions are `lcall' and `ljmp' in AT&T syntax,
but are `call far' and `jump far' in Intel convention.
File: as.info, Node: i386-Regs, Next: i386-Prefixes, Prev: i386-Mnemonics, Up: i386-Dependent
8.11.4 Register Naming
----------------------
Register operands are always prefixed with `%'. The 80386 registers
consist of
* the 8 32-bit registers `%eax' (the accumulator), `%ebx', `%ecx',
`%edx', `%edi', `%esi', `%ebp' (the frame pointer), and `%esp'
(the stack pointer).
* the 8 16-bit low-ends of these: `%ax', `%bx', `%cx', `%dx', `%di',
`%si', `%bp', and `%sp'.
* the 8 8-bit registers: `%ah', `%al', `%bh', `%bl', `%ch', `%cl',
`%dh', and `%dl' (These are the high-bytes and low-bytes of `%ax',
`%bx', `%cx', and `%dx')
* the 6 section registers `%cs' (code section), `%ds' (data
section), `%ss' (stack section), `%es', `%fs', and `%gs'.
* the 3 processor control registers `%cr0', `%cr2', and `%cr3'.
* the 6 debug registers `%db0', `%db1', `%db2', `%db3', `%db6', and
`%db7'.
* the 2 test registers `%tr6' and `%tr7'.
* the 8 floating point register stack `%st' or equivalently
`%st(0)', `%st(1)', `%st(2)', `%st(3)', `%st(4)', `%st(5)',
`%st(6)', and `%st(7)'. These registers are overloaded by 8 MMX
registers `%mm0', `%mm1', `%mm2', `%mm3', `%mm4', `%mm5', `%mm6'
and `%mm7'.
* the 8 SSE registers registers `%xmm0', `%xmm1', `%xmm2', `%xmm3',
`%xmm4', `%xmm5', `%xmm6' and `%xmm7'.
The AMD x86-64 architecture extends the register set by:
* enhancing the 8 32-bit registers to 64-bit: `%rax' (the
accumulator), `%rbx', `%rcx', `%rdx', `%rdi', `%rsi', `%rbp' (the
frame pointer), `%rsp' (the stack pointer)
* the 8 extended registers `%r8'-`%r15'.
* the 8 32-bit low ends of the extended registers: `%r8d'-`%r15d'
* the 8 16-bit low ends of the extended registers: `%r8w'-`%r15w'
* the 8 8-bit low ends of the extended registers: `%r8b'-`%r15b'
* the 4 8-bit registers: `%sil', `%dil', `%bpl', `%spl'.
* the 8 debug registers: `%db8'-`%db15'.
* the 8 SSE registers: `%xmm8'-`%xmm15'.
File: as.info, Node: i386-Prefixes, Next: i386-Memory, Prev: i386-Regs, Up: i386-Dependent
8.11.5 Instruction Prefixes
---------------------------
Instruction prefixes are used to modify the following instruction. They
are used to repeat string instructions, to provide section overrides, to
perform bus lock operations, and to change operand and address sizes.
(Most instructions that normally operate on 32-bit operands will use
16-bit operands if the instruction has an "operand size" prefix.)
Instruction prefixes are best written on the same line as the
instruction they act upon. For example, the `scas' (scan string)
instruction is repeated with:
repne scas %es:(%edi),%al
You may also place prefixes on the lines immediately preceding the
instruction, but this circumvents checks that `as' does with prefixes,
and will not work with all prefixes.
Here is a list of instruction prefixes:
* Section override prefixes `cs', `ds', `ss', `es', `fs', `gs'.
These are automatically added by specifying using the
SECTION:MEMORY-OPERAND form for memory references.
* Operand/Address size prefixes `data16' and `addr16' change 32-bit
operands/addresses into 16-bit operands/addresses, while `data32'
and `addr32' change 16-bit ones (in a `.code16' section) into
32-bit operands/addresses. These prefixes _must_ appear on the
same line of code as the instruction they modify. For example, in
a 16-bit `.code16' section, you might write:
addr32 jmpl *(%ebx)
* The bus lock prefix `lock' inhibits interrupts during execution of
the instruction it precedes. (This is only valid with certain
instructions; see a 80386 manual for details).
* The wait for coprocessor prefix `wait' waits for the coprocessor to
complete the current instruction. This should never be needed for
the 80386/80387 combination.
* The `rep', `repe', and `repne' prefixes are added to string
instructions to make them repeat `%ecx' times (`%cx' times if the
current address size is 16-bits).
* The `rex' family of prefixes is used by x86-64 to encode
extensions to i386 instruction set. The `rex' prefix has four
bits -- an operand size overwrite (`64') used to change operand
size from 32-bit to 64-bit and X, Y and Z extensions bits used to
extend the register set.
You may write the `rex' prefixes directly. The `rex64xyz'
instruction emits `rex' prefix with all the bits set. By omitting
the `64', `x', `y' or `z' you may write other prefixes as well.
Normally, there is no need to write the prefixes explicitly, since
gas will automatically generate them based on the instruction
operands.
File: as.info, Node: i386-Memory, Next: i386-Jumps, Prev: i386-Prefixes, Up: i386-Dependent
8.11.6 Memory References
------------------------
An Intel syntax indirect memory reference of the form
SECTION:[BASE + INDEX*SCALE + DISP]
is translated into the AT&T syntax
SECTION:DISP(BASE, INDEX, SCALE)
where BASE and INDEX are the optional 32-bit base and index registers,
DISP is the optional displacement, and SCALE, taking the values 1, 2,
4, and 8, multiplies INDEX to calculate the address of the operand. If
no SCALE is specified, SCALE is taken to be 1. SECTION specifies the
optional section register for the memory operand, and may override the
default section register (see a 80386 manual for section register
defaults). Note that section overrides in AT&T syntax _must_ be
preceded by a `%'. If you specify a section override which coincides
with the default section register, `as' does _not_ output any section
register override prefixes to assemble the given instruction. Thus,
section overrides can be specified to emphasize which section register
is used for a given memory operand.
Here are some examples of Intel and AT&T style memory references:
AT&T: `-4(%ebp)', Intel: `[ebp - 4]'
BASE is `%ebp'; DISP is `-4'. SECTION is missing, and the default
section is used (`%ss' for addressing with `%ebp' as the base
register). INDEX, SCALE are both missing.
AT&T: `foo(,%eax,4)', Intel: `[foo + eax*4]'
INDEX is `%eax' (scaled by a SCALE 4); DISP is `foo'. All other
fields are missing. The section register here defaults to `%ds'.
AT&T: `foo(,1)'; Intel `[foo]'
This uses the value pointed to by `foo' as a memory operand. Note
that BASE and INDEX are both missing, but there is only _one_ `,'.
This is a syntactic exception.
AT&T: `%gs:foo'; Intel `gs:foo'
This selects the contents of the variable `foo' with section
register SECTION being `%gs'.
Absolute (as opposed to PC relative) call and jump operands must be
prefixed with `*'. If no `*' is specified, `as' always chooses PC
relative addressing for jump/call labels.
Any instruction that has a memory operand, but no register operand,
_must_ specify its size (byte, word, long, or quadruple) with an
instruction mnemonic suffix (`b', `w', `l' or `q', respectively).
The x86-64 architecture adds an RIP (instruction pointer relative)
addressing. This addressing mode is specified by using `rip' as a base
register. Only constant offsets are valid. For example:
AT&T: `1234(%rip)', Intel: `[rip + 1234]'
Points to the address 1234 bytes past the end of the current
instruction.
AT&T: `symbol(%rip)', Intel: `[rip + symbol]'
Points to the `symbol' in RIP relative way, this is shorter than
the default absolute addressing.
Other addressing modes remain unchanged in x86-64 architecture,
except registers used are 64-bit instead of 32-bit.
File: as.info, Node: i386-Jumps, Next: i386-Float, Prev: i386-Memory, Up: i386-Dependent
8.11.7 Handling of Jump Instructions
------------------------------------
Jump instructions are always optimized to use the smallest possible
displacements. This is accomplished by using byte (8-bit) displacement
jumps whenever the target is sufficiently close. If a byte displacement
is insufficient a long displacement is used. We do not support word
(16-bit) displacement jumps in 32-bit mode (i.e. prefixing the jump
instruction with the `data16' instruction prefix), since the 80386
insists upon masking `%eip' to 16 bits after the word displacement is
added. (See also *note i386-Arch::)
Note that the `jcxz', `jecxz', `loop', `loopz', `loope', `loopnz'
and `loopne' instructions only come in byte displacements, so that if
you use these instructions (`gcc' does not use them) you may get an
error message (and incorrect code). The AT&T 80386 assembler tries to
get around this problem by expanding `jcxz foo' to
jcxz cx_zero
jmp cx_nonzero
cx_zero: jmp foo
cx_nonzero:
File: as.info, Node: i386-Float, Next: i386-SIMD, Prev: i386-Jumps, Up: i386-Dependent
8.11.8 Floating Point
---------------------
All 80387 floating point types except packed BCD are supported. (BCD
support may be added without much difficulty). These data types are
16-, 32-, and 64- bit integers, and single (32-bit), double (64-bit),
and extended (80-bit) precision floating point. Each supported type
has an instruction mnemonic suffix and a constructor associated with
it. Instruction mnemonic suffixes specify the operand's data type.
Constructors build these data types into memory.
* Floating point constructors are `.float' or `.single', `.double',
and `.tfloat' for 32-, 64-, and 80-bit formats. These correspond
to instruction mnemonic suffixes `s', `l', and `t'. `t' stands for
80-bit (ten byte) real. The 80387 only supports this format via
the `fldt' (load 80-bit real to stack top) and `fstpt' (store
80-bit real and pop stack) instructions.
* Integer constructors are `.word', `.long' or `.int', and `.quad'
for the 16-, 32-, and 64-bit integer formats. The corresponding
instruction mnemonic suffixes are `s' (single), `l' (long), and
`q' (quad). As with the 80-bit real format, the 64-bit `q' format
is only present in the `fildq' (load quad integer to stack top)
and `fistpq' (store quad integer and pop stack) instructions.
Register to register operations should not use instruction mnemonic
suffixes. `fstl %st, %st(1)' will give a warning, and be assembled as
if you wrote `fst %st, %st(1)', since all register to register
operations use 80-bit floating point operands. (Contrast this with
`fstl %st, mem', which converts `%st' from 80-bit to 64-bit floating
point format, then stores the result in the 4 byte location `mem')
File: as.info, Node: i386-SIMD, Next: i386-16bit, Prev: i386-Float, Up: i386-Dependent
8.11.9 Intel's MMX and AMD's 3DNow! SIMD Operations
---------------------------------------------------
`as' supports Intel's MMX instruction set (SIMD instructions for
integer data), available on Intel's Pentium MMX processors and Pentium
II processors, AMD's K6 and K6-2 processors, Cyrix' M2 processor, and
probably others. It also supports AMD's 3DNow! instruction set (SIMD
instructions for 32-bit floating point data) available on AMD's K6-2
processor and possibly others in the future.
Currently, `as' does not support Intel's floating point SIMD, Katmai
(KNI).
The eight 64-bit MMX operands, also used by 3DNow!, are called
`%mm0', `%mm1', ... `%mm7'. They contain eight 8-bit integers, four
16-bit integers, two 32-bit integers, one 64-bit integer, or two 32-bit
floating point values. The MMX registers cannot be used at the same
time as the floating point stack.
See Intel and AMD documentation, keeping in mind that the operand
order in instructions is reversed from the Intel syntax.
File: as.info, Node: i386-16bit, Next: i386-Arch, Prev: i386-SIMD, Up: i386-Dependent
8.11.10 Writing 16-bit Code
---------------------------
While `as' normally writes only "pure" 32-bit i386 code or 64-bit
x86-64 code depending on the default configuration, it also supports
writing code to run in real mode or in 16-bit protected mode code
segments. To do this, put a `.code16' or `.code16gcc' directive before
the assembly language instructions to be run in 16-bit mode. You can
switch `as' back to writing normal 32-bit code with the `.code32'
directive.
`.code16gcc' provides experimental support for generating 16-bit
code from gcc, and differs from `.code16' in that `call', `ret',
`enter', `leave', `push', `pop', `pusha', `popa', `pushf', and `popf'
instructions default to 32-bit size. This is so that the stack pointer
is manipulated in the same way over function calls, allowing access to
function parameters at the same stack offsets as in 32-bit mode.
`.code16gcc' also automatically adds address size prefixes where
necessary to use the 32-bit addressing modes that gcc generates.
The code which `as' generates in 16-bit mode will not necessarily
run on a 16-bit pre-80386 processor. To write code that runs on such a
processor, you must refrain from using _any_ 32-bit constructs which
require `as' to output address or operand size prefixes.
Note that writing 16-bit code instructions by explicitly specifying a
prefix or an instruction mnemonic suffix within a 32-bit code section
generates different machine instructions than those generated for a
16-bit code segment. In a 32-bit code section, the following code
generates the machine opcode bytes `66 6a 04', which pushes the value
`4' onto the stack, decrementing `%esp' by 2.
pushw $4
The same code in a 16-bit code section would generate the machine
opcode bytes `6a 04' (ie. without the operand size prefix), which is
correct since the processor default operand size is assumed to be 16
bits in a 16-bit code section.
File: as.info, Node: i386-Bugs, Next: i386-Notes, Prev: i386-Arch, Up: i386-Dependent
8.11.11 AT&T Syntax bugs
------------------------
The UnixWare assembler, and probably other AT&T derived ix86 Unix
assemblers, generate floating point instructions with reversed source
and destination registers in certain cases. Unfortunately, gcc and
possibly many other programs use this reversed syntax, so we're stuck
with it.
For example
fsub %st,%st(3)
results in `%st(3)' being updated to `%st - %st(3)' rather than the
expected `%st(3) - %st'. This happens with all the non-commutative
arithmetic floating point operations with two register operands where
the source register is `%st' and the destination register is `%st(i)'.
File: as.info, Node: i386-Arch, Next: i386-Bugs, Prev: i386-16bit, Up: i386-Dependent
8.11.12 Specifying CPU Architecture
-----------------------------------
`as' may be told to assemble for a particular CPU (sub-)architecture
with the `.arch CPU_TYPE' directive. This directive enables a warning
when gas detects an instruction that is not supported on the CPU
specified. The choices for CPU_TYPE are:
`i8086' `i186' `i286' `i386'
`i486' `i586' `i686' `pentium'
`pentiumpro' `pentiumii' `pentiumiii' `pentium4'
`k6' `athlon'
`sledgehammer'
`.mmx' `.sse'
`.sse2'
`.sse3'
`.3dnow'
Apart from the warning, there are only two other effects on `as'
operation; Firstly, if you specify a CPU other than `i486', then shift
by one instructions such as `sarl $1, %eax' will automatically use a
two byte opcode sequence. The larger three byte opcode sequence is
used on the 486 (and when no architecture is specified) because it
executes faster on the 486. Note that you can explicitly request the
two byte opcode by writing `sarl %eax'. Secondly, if you specify
`i8086', `i186', or `i286', _and_ `.code16' or `.code16gcc' then byte
offset conditional jumps will be promoted when necessary to a two
instruction sequence consisting of a conditional jump of the opposite
sense around an unconditional jump to the target.
Following the CPU architecture (but not a sub-architecture, which
are those starting with a dot), you may specify `jumps' or `nojumps' to
control automatic promotion of conditional jumps. `jumps' is the
default, and enables jump promotion; All external jumps will be of the
long variety, and file-local jumps will be promoted as necessary.
(*note i386-Jumps::) `nojumps' leaves external conditional jumps as
byte offset jumps, and warns about file-local conditional jumps that
`as' promotes. Unconditional jumps are treated as for `jumps'.
For example
.arch i8086,nojumps
File: as.info, Node: i386-Notes, Prev: i386-Bugs, Up: i386-Dependent
8.11.13 Notes
-------------
There is some trickery concerning the `mul' and `imul' instructions
that deserves mention. The 16-, 32-, 64- and 128-bit expanding
multiplies (base opcode `0xf6'; extension 4 for `mul' and 5 for `imul')
can be output only in the one operand form. Thus, `imul %ebx, %eax'
does _not_ select the expanding multiply; the expanding multiply would
clobber the `%edx' register, and this would confuse `gcc' output. Use
`imul %ebx' to get the 64-bit product in `%edx:%eax'.
We have added a two operand form of `imul' when the first operand is
an immediate mode expression and the second operand is a register.
This is just a shorthand, so that, multiplying `%eax' by 69, for
example, can be done with `imul $69, %eax' rather than `imul $69, %eax,
%eax'.
File: as.info, Node: i860-Dependent, Next: i960-Dependent, Prev: i386-Dependent, Up: Machine Dependencies
8.12 Intel i860 Dependent Features
==================================
* Menu:
* Notes-i860:: i860 Notes
* Options-i860:: i860 Command-line Options
* Directives-i860:: i860 Machine Directives
* Opcodes for i860:: i860 Opcodes
File: as.info, Node: Notes-i860, Next: Options-i860, Up: i860-Dependent
8.12.1 i860 Notes
-----------------
This is a fairly complete i860 assembler which is compatible with the
UNIX System V/860 Release 4 assembler. However, it does not currently
support SVR4 PIC (i.e., `@GOT, @GOTOFF, @PLT').
Like the SVR4/860 assembler, the output object format is ELF32.
Currently, this is the only supported object format. If there is
sufficient interest, other formats such as COFF may be implemented.
Both the Intel and AT&T/SVR4 syntaxes are supported, with the latter
being the default. One difference is that AT&T syntax requires the '%'
prefix on register names while Intel syntax does not. Another
difference is in the specification of relocatable expressions. The
Intel syntax is `ha%expression' whereas the SVR4 syntax is
`[expression]@ha' (and similarly for the "l" and "h" selectors).
File: as.info, Node: Options-i860, Next: Directives-i860, Prev: Notes-i860, Up: i860-Dependent
8.12.2 i860 Command-line Options
--------------------------------
8.12.2.1 SVR4 compatibility options
...................................
`-V'
Print assembler version.
`-Qy'
Ignored.
`-Qn'
Ignored.
8.12.2.2 Other options
......................
`-EL'
Select little endian output (this is the default).
`-EB'
Select big endian output. Note that the i860 always reads
instructions as little endian data, so this option only effects
data and not instructions.
`-mwarn-expand'
Emit a warning message if any pseudo-instruction expansions
occurred. For example, a `or' instruction with an immediate
larger than 16-bits will be expanded into two instructions. This
is a very undesirable feature to rely on, so this flag can help
detect any code where it happens. One use of it, for instance, has
been to find and eliminate any place where `gcc' may emit these
pseudo-instructions.
`-mxp'
Enable support for the i860XP instructions and control registers.
By default, this option is disabled so that only the base
instruction set (i.e., i860XR) is supported.
`-mintel-syntax'
The i860 assembler defaults to AT&T/SVR4 syntax. This option
enables the Intel syntax.
File: as.info, Node: Directives-i860, Next: Opcodes for i860, Prev: Options-i860, Up: i860-Dependent
8.12.3 i860 Machine Directives
------------------------------
`.dual'
Enter dual instruction mode. While this directive is supported, the
preferred way to use dual instruction mode is to explicitly code
the dual bit with the `d.' prefix.
`.enddual'
Exit dual instruction mode. While this directive is supported, the
preferred way to use dual instruction mode is to explicitly code
the dual bit with the `d.' prefix.
`.atmp'
Change the temporary register used when expanding pseudo
operations. The default register is `r31'.
The `.dual', `.enddual', and `.atmp' directives are available only
in the Intel syntax mode.
Both syntaxes allow for the standard `.align' directive. However,
the Intel syntax additionally allows keywords for the alignment
parameter: "`.align type'", where `type' is one of `.short', `.long',
`.quad', `.single', `.double' representing alignments of 2, 4, 16, 4,
and 8, respectively.
File: as.info, Node: Opcodes for i860, Prev: Directives-i860, Up: i860-Dependent
8.12.4 i860 Opcodes
-------------------
All of the Intel i860XR and i860XP machine instructions are supported.
Please see either _i860 Microprocessor Programmer's Reference Manual_
or _i860 Microprocessor Architecture_ for more information.
8.12.4.1 Other instruction support (pseudo-instructions)
........................................................
For compatibility with some other i860 assemblers, a number of
pseudo-instructions are supported. While these are supported, they are
a very undesirable feature that should be avoided - in particular, when
they result in an expansion to multiple actual i860 instructions. Below
are the pseudo-instructions that result in expansions.
* Load large immediate into general register:
The pseudo-instruction `mov imm,%rn' (where the immediate does not
fit within a signed 16-bit field) will be expanded into:
orh large_imm@h,%r0,%rn
or large_imm@l,%rn,%rn
* Load/store with relocatable address expression:
For example, the pseudo-instruction `ld.b addr_exp(%rx),%rn' will
be expanded into:
orh addr_exp@ha,%rx,%r31
ld.l addr_exp@l(%r31),%rn
The analogous expansions apply to `ld.x, st.x, fld.x, pfld.x,
fst.x', and `pst.x' as well.
* Signed large immediate with add/subtract:
If any of the arithmetic operations `adds, addu, subs, subu' are
used with an immediate larger than 16-bits (signed), then they
will be expanded. For instance, the pseudo-instruction `adds
large_imm,%rx,%rn' expands to:
orh large_imm@h,%r0,%r31
or large_imm@l,%r31,%r31
adds %r31,%rx,%rn
* Unsigned large immediate with logical operations:
Logical operations (`or, andnot, or, xor') also result in
expansions. The pseudo-instruction `or large_imm,%rx,%rn' results
in:
orh large_imm@h,%rx,%r31
or large_imm@l,%r31,%rn
Similarly for the others, except for `and' which expands to:
andnot (-1 - large_imm)@h,%rx,%r31
andnot (-1 - large_imm)@l,%r31,%rn
File: as.info, Node: i960-Dependent, Next: IA-64-Dependent, Prev: i860-Dependent, Up: Machine Dependencies
8.13 Intel 80960 Dependent Features
===================================
* Menu:
* Options-i960:: i960 Command-line Options
* Floating Point-i960:: Floating Point
* Directives-i960:: i960 Machine Directives
* Opcodes for i960:: i960 Opcodes
File: as.info, Node: Options-i960, Next: Floating Point-i960, Up: i960-Dependent
8.13.1 i960 Command-line Options
--------------------------------
`-ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC'
Select the 80960 architecture. Instructions or features not
supported by the selected architecture cause fatal errors.
`-ACA' is equivalent to `-ACA_A'; `-AKC' is equivalent to `-AMC'.
Synonyms are provided for compatibility with other tools.
If you do not specify any of these options, `as' generates code
for any instruction or feature that is supported by _some_ version
of the 960 (even if this means mixing architectures!). In
principle, `as' attempts to deduce the minimal sufficient
processor type if none is specified; depending on the object code
format, the processor type may be recorded in the object file. If
it is critical that the `as' output match a specific architecture,
specify that architecture explicitly.
`-b'
Add code to collect information about conditional branches taken,
for later optimization using branch prediction bits. (The
conditional branch instructions have branch prediction bits in the
CA, CB, and CC architectures.) If BR represents a conditional
branch instruction, the following represents the code generated by
the assembler when `-b' is specified:
call INCREMENT ROUTINE
.word 0 # pre-counter
Label: BR
call INCREMENT ROUTINE
.word 0 # post-counter
The counter following a branch records the number of times that
branch was _not_ taken; the differenc between the two counters is
the number of times the branch _was_ taken.
A table of every such `Label' is also generated, so that the
external postprocessor `gbr960' (supplied by Intel) can locate all
the counters. This table is always labeled `__BRANCH_TABLE__';
this is a local symbol to permit collecting statistics for many
separate object files. The table is word aligned, and begins with
a two-word header. The first word, initialized to 0, is used in
maintaining linked lists of branch tables. The second word is a
count of the number of entries in the table, which follow
immediately: each is a word, pointing to one of the labels
illustrated above.
+------------+------------+------------+ ... +------------+
| | | | | |
| *NEXT | COUNT: N | *BRLAB 1 | | *BRLAB N |
| | | | | |
+------------+------------+------------+ ... +------------+
__BRANCH_TABLE__ layout
The first word of the header is used to locate multiple branch
tables, since each object file may contain one. Normally the links
are maintained with a call to an initialization routine, placed at
the beginning of each function in the file. The GNU C compiler
generates these calls automatically when you give it a `-b' option.
For further details, see the documentation of `gbr960'.
`-no-relax'
Normally, Compare-and-Branch instructions with targets that require
displacements greater than 13 bits (or that have external targets)
are replaced with the corresponding compare (or `chkbit') and
branch instructions. You can use the `-no-relax' option to
specify that `as' should generate errors instead, if the target
displacement is larger than 13 bits.
This option does not affect the Compare-and-Jump instructions; the
code emitted for them is _always_ adjusted when necessary
(depending on displacement size), regardless of whether you use
`-no-relax'.
File: as.info, Node: Floating Point-i960, Next: Directives-i960, Prev: Options-i960, Up: i960-Dependent
8.13.2 Floating Point
---------------------
`as' generates IEEE floating-point numbers for the directives `.float',
`.double', `.extended', and `.single'.
File: as.info, Node: Directives-i960, Next: Opcodes for i960, Prev: Floating Point-i960, Up: i960-Dependent
8.13.3 i960 Machine Directives
------------------------------
`.bss SYMBOL, LENGTH, ALIGN'
Reserve LENGTH bytes in the bss section for a local SYMBOL,
aligned to the power of two specified by ALIGN. LENGTH and ALIGN
must be positive absolute expressions. This directive differs
from `.lcomm' only in that it permits you to specify an alignment.
*Note `.lcomm': Lcomm.
`.extended FLONUMS'
`.extended' expects zero or more flonums, separated by commas; for
each flonum, `.extended' emits an IEEE extended-format (80-bit)
floating-point number.
`.leafproc CALL-LAB, BAL-LAB'
You can use the `.leafproc' directive in conjunction with the
optimized `callj' instruction to enable faster calls of leaf
procedures. If a procedure is known to call no other procedures,
you may define an entry point that skips procedure prolog code
(and that does not depend on system-supplied saved context), and
declare it as the BAL-LAB using `.leafproc'. If the procedure
also has an entry point that goes through the normal prolog, you
can specify that entry point as CALL-LAB.
A `.leafproc' declaration is meant for use in conjunction with the
optimized call instruction `callj'; the directive records the data
needed later to choose between converting the `callj' into a `bal'
or a `call'.
CALL-LAB is optional; if only one argument is present, or if the
two arguments are identical, the single argument is assumed to be
the `bal' entry point.
`.sysproc NAME, INDEX'
The `.sysproc' directive defines a name for a system procedure.
After you define it using `.sysproc', you can use NAME to refer to
the system procedure identified by INDEX when calling procedures
with the optimized call instruction `callj'.
Both arguments are required; INDEX must be between 0 and 31
(inclusive).
File: as.info, Node: Opcodes for i960, Prev: Directives-i960, Up: i960-Dependent
8.13.4 i960 Opcodes
-------------------
All Intel 960 machine instructions are supported; *note i960
Command-line Options: Options-i960. for a discussion of selecting the
instruction subset for a particular 960 architecture.
Some opcodes are processed beyond simply emitting a single
corresponding instruction: `callj', and Compare-and-Branch or
Compare-and-Jump instructions with target displacements larger than 13
bits.
* Menu:
* callj-i960:: `callj'
* Compare-and-branch-i960:: Compare-and-Branch
File: as.info, Node: callj-i960, Next: Compare-and-branch-i960, Up: Opcodes for i960
8.13.4.1 `callj'
................
You can write `callj' to have the assembler or the linker determine the
most appropriate form of subroutine call: `call', `bal', or `calls'.
If the assembly source contains enough information--a `.leafproc' or
`.sysproc' directive defining the operand--then `as' translates the
`callj'; if not, it simply emits the `callj', leaving it for the linker
to resolve.
File: as.info, Node: Compare-and-branch-i960, Prev: callj-i960, Up: Opcodes for i960
8.13.4.2 Compare-and-Branch
...........................
The 960 architectures provide combined Compare-and-Branch instructions
that permit you to store the branch target in the lower 13 bits of the
instruction word itself. However, if you specify a branch target far
enough away that its address won't fit in 13 bits, the assembler can
either issue an error, or convert your Compare-and-Branch instruction
into separate instructions to do the compare and the branch.
Whether `as' gives an error or expands the instruction depends on
two choices you can make: whether you use the `-no-relax' option, and
whether you use a "Compare and Branch" instruction or a "Compare and
Jump" instruction. The "Jump" instructions are _always_ expanded if
necessary; the "Branch" instructions are expanded when necessary
_unless_ you specify `-no-relax'--in which case `as' gives an error
instead.
These are the Compare-and-Branch instructions, their "Jump" variants,
and the instruction pairs they may expand into:
Compare and
Branch Jump Expanded to
------ ------ ------------
bbc chkbit; bno
bbs chkbit; bo
cmpibe cmpije cmpi; be
cmpibg cmpijg cmpi; bg
cmpibge cmpijge cmpi; bge
cmpibl cmpijl cmpi; bl
cmpible cmpijle cmpi; ble
cmpibno cmpijno cmpi; bno
cmpibne cmpijne cmpi; bne
cmpibo cmpijo cmpi; bo
cmpobe cmpoje cmpo; be
cmpobg cmpojg cmpo; bg
cmpobge cmpojge cmpo; bge
cmpobl cmpojl cmpo; bl
cmpoble cmpojle cmpo; ble
cmpobne cmpojne cmpo; bne
File: as.info, Node: IA-64-Dependent, Next: IP2K-Dependent, Prev: i960-Dependent, Up: Machine Dependencies
8.14 IA-64 Dependent Features
=============================
* Menu:
* IA-64 Options:: Options
* IA-64 Syntax:: Syntax
* IA-64 Opcodes:: Opcodes
File: as.info, Node: IA-64 Options, Next: IA-64 Syntax, Up: IA-64-Dependent
8.14.1 Options
--------------
`-mconstant-gp'
This option instructs the assembler to mark the resulting object
file as using the "constant GP" model. With this model, it is
assumed that the entire program uses a single global pointer (GP)
value. Note that this option does not in any fashion affect the
machine code emitted by the assembler. All it does is turn on the
EF_IA_64_CONS_GP flag in the ELF file header.
`-mauto-pic'
This option instructs the assembler to mark the resulting object
file as using the "constant GP without function descriptor" data
model. This model is like the "constant GP" model, except that it
additionally does away with function descriptors. What this means
is that the address of a function refers directly to the
function's code entry-point. Normally, such an address would
refer to a function descriptor, which contains both the code
entry-point and the GP-value needed by the function. Note that
this option does not in any fashion affect the machine code
emitted by the assembler. All it does is turn on the
EF_IA_64_NOFUNCDESC_CONS_GP flag in the ELF file header.
`-milp32'
`-milp64'
`-mlp64'
`-mp64'
These options select the data model. The assembler defaults to
`-mlp64' (LP64 data model).
`-mle'
`-mbe'
These options select the byte order. The `-mle' option selects
little-endian byte order (default) and `-mbe' selects big-endian
byte order. Note that IA-64 machine code always uses
little-endian byte order.
`-mtune=itanium1'
`-mtune=itanium2'
Tune for a particular IA-64 CPU, ITANIUM1 or ITANIUM2. The default
is ITANIUM2.
`-munwind-check=warning'
`-munwind-check=error'
These options control what the assembler will do when performing
consistency checks on unwind directives. `-munwind-check=warning'
will make the assembler issue a warning when an unwind directive
check fails. This is the default. `-munwind-check=error' will
make the assembler issue an error when an unwind directive check
fails.
`-mhint.b=ok'
`-mhint.b=warning'
`-mhint.b=error'
These options control what the assembler will do when the `hint.b'
instruction is used. `-mhint.b=ok' will make the assembler accept
`hint.b'. `-mint.b=warning' will make the assembler issue a
warning when `hint.b' is used. `-mhint.b=error' will make the
assembler treat `hint.b' as an error, which is the default.
`-x'
`-xexplicit'
These options turn on dependency violation checking.
`-xauto'
This option instructs the assembler to automatically insert stop
bits where necessary to remove dependency violations. This is the
default mode.
`-xnone'
This option turns off dependency violation checking.
`-xdebug'
This turns on debug output intended to help tracking down bugs in
the dependency violation checker.
`-xdebugn'
This is a shortcut for -xnone -xdebug.
`-xdebugx'
This is a shortcut for -xexplicit -xdebug.
File: as.info, Node: IA-64 Syntax, Next: IA-64 Opcodes, Prev: IA-64 Options, Up: IA-64-Dependent
8.14.2 Syntax
-------------
The assembler syntax closely follows the IA-64 Assembly Language
Reference Guide.
* Menu:
* IA-64-Chars:: Special Characters
* IA-64-Regs:: Register Names
* IA-64-Bits:: Bit Names
File: as.info, Node: IA-64-Chars, Next: IA-64-Regs, Up: IA-64 Syntax
8.14.2.1 Special Characters
...........................
`//' is the line comment token.
`;' can be used instead of a newline to separate statements.
File: as.info, Node: IA-64-Regs, Next: IA-64-Bits, Prev: IA-64-Chars, Up: IA-64 Syntax
8.14.2.2 Register Names
.......................
The 128 integer registers are referred to as `rN'. The 128
floating-point registers are referred to as `fN'. The 128 application
registers are referred to as `arN'. The 128 control registers are
referred to as `crN'. The 64 one-bit predicate registers are referred
to as `pN'. The 8 branch registers are referred to as `bN'. In
addition, the assembler defines a number of aliases: `gp' (`r1'), `sp'
(`r12'), `rp' (`b0'), `ret0' (`r8'), `ret1' (`r9'), `ret2' (`r10'),
`ret3' (`r9'), `fargN' (`f8+N'), and `fretN' (`f8+N').
For convenience, the assembler also defines aliases for all named
application and control registers. For example, `ar.bsp' refers to the
register backing store pointer (`ar17'). Similarly, `cr.eoi' refers to
the end-of-interrupt register (`cr67').
File: as.info, Node: IA-64-Bits, Prev: IA-64-Regs, Up: IA-64 Syntax
8.14.2.3 IA-64 Processor-Status-Register (PSR) Bit Names
........................................................
The assembler defines bit masks for each of the bits in the IA-64
processor status register. For example, `psr.ic' corresponds to a
value of 0x2000. These masks are primarily intended for use with the
`ssm'/`sum' and `rsm'/`rum' instructions, but they can be used anywhere
else where an integer constant is expected.
File: as.info, Node: IA-64 Opcodes, Prev: IA-64 Syntax, Up: IA-64-Dependent
8.14.3 Opcodes
--------------
For detailed information on the IA-64 machine instruction set, see the
IA-64 Architecture Handbook
(http://developer.intel.com/design/itanium/arch_spec.htm).
File: as.info, Node: IP2K-Dependent, Next: M32C-Dependent, Prev: IA-64-Dependent, Up: Machine Dependencies
8.15 IP2K Dependent Features
============================
* Menu:
* IP2K-Opts:: IP2K Options
File: as.info, Node: IP2K-Opts, Up: IP2K-Dependent
8.15.1 IP2K Options
-------------------
The Ubicom IP2K version of `as' has a few machine dependent options:
`-mip2022ext'
`as' can assemble the extended IP2022 instructions, but it will
only do so if this is specifically allowed via this command line
option.
`-mip2022'
This option restores the assembler's default behaviour of not
permitting the extended IP2022 instructions to be assembled.
File: as.info, Node: M32C-Dependent, Next: M32R-Dependent, Prev: IP2K-Dependent, Up: Machine Dependencies
8.16 M32C Dependent Features
============================
`as' can assemble code for several different members of the Renesas
M32C family. Normally the default is to assemble code for the M16C
microprocessor. The `-m32c' option may be used to change the default
to the M32C microprocessor.
* Menu:
* M32C-Opts:: M32C Options
* M32C-Modifiers:: Symbolic Operand Modifiers
File: as.info, Node: M32C-Opts, Next: M32C-Modifiers, Up: M32C-Dependent
8.16.1 M32C Options
-------------------
The Renesas M32C version of `as' has two machine-dependent options:
`-m32c'
Assemble M32C instructions.
`-m16c'
Assemble M16C instructions (default).
File: as.info, Node: M32C-Modifiers, Prev: M32C-Opts, Up: M32C-Dependent
8.16.2 Symbolic Operand Modifiers
---------------------------------
The assembler supports several modifiers when using symbol addresses in
M32C instruction operands. The general syntax is the following:
%modifier(symbol)
`%dsp8'
`%dsp16'
These modifiers override the assembler's assumptions about how big
a symbol's address is. Normally, when it sees an operand like
`sym[a0]' it assumes `sym' may require the widest displacement
field (16 bits for `-m16c', 24 bits for `-m32c'). These modifiers
tell it to assume the address will fit in an 8 or 16 bit
(respectively) unsigned displacement. Note that, of course, if it
doesn't actually fit you will get linker errors. Example:
mov.w %dsp8(sym)[a0],r1
mov.b #0,%dsp8(sym)[a0]
`%hi8'
This modifier allows you to load bits 16 through 23 of a 24 bit
address into an 8 bit register. This is useful with, for example,
the M16C `smovf' instruction, which expects a 20 bit address in
`r1h' and `a0'. Example:
mov.b #%hi8(sym),r1h
mov.w #%lo16(sym),a0
smovf.b
`%lo16'
Likewise, this modifier allows you to load bits 0 through 15 of a
24 bit address into a 16 bit register.
`%hi16'
This modifier allows you to load bits 16 through 31 of a 32 bit
address into a 16 bit register. While the M32C family only has 24
bits of address space, it does support addresses in pairs of 16 bit
registers (like `a1a0' for the `lde' instruction). This modifier
is for loading the upper half in such cases. Example:
mov.w #%hi16(sym),a1
mov.w #%lo16(sym),a0
...
lde.w [a1a0],r1
File: as.info, Node: M32R-Dependent, Next: M68K-Dependent, Prev: M32C-Dependent, Up: Machine Dependencies
8.17 M32R Dependent Features
============================
* Menu:
* M32R-Opts:: M32R Options
* M32R-Directives:: M32R Directives
* M32R-Warnings:: M32R Warnings
File: as.info, Node: M32R-Opts, Next: M32R-Directives, Up: M32R-Dependent
8.17.1 M32R Options
-------------------
The Renease M32R version of `as' has a few machine dependent options:
`-m32rx'
`as' can assemble code for several different members of the
Renesas M32R family. Normally the default is to assemble code for
the M32R microprocessor. This option may be used to change the
default to the M32RX microprocessor, which adds some more
instructions to the basic M32R instruction set, and some
additional parameters to some of the original instructions.
`-m32r2'
This option changes the target processor to the the M32R2
microprocessor.
`-m32r'
This option can be used to restore the assembler's default
behaviour of assembling for the M32R microprocessor. This can be
useful if the default has been changed by a previous command line
option.
`-little'
This option tells the assembler to produce little-endian code and
data. The default is dependent upon how the toolchain was
configured.
`-EL'
This is a synonum for _-little_.
`-big'
This option tells the assembler to produce big-endian code and
data.
`-EB'
This is a synonum for _-big_.
`-KPIC'
This option specifies that the output of the assembler should be
marked as position-independent code (PIC).
`-parallel'
This option tells the assembler to attempts to combine two
sequential instructions into a single, parallel instruction, where
it is legal to do so.
`-no-parallel'
This option disables a previously enabled _-parallel_ option.
`-no-bitinst'
This option disables the support for the extended bit-field
instructions provided by the M32R2. If this support needs to be
re-enabled the _-bitinst_ switch can be used to restore it.
`-O'
This option tells the assembler to attempt to optimize the
instructions that it produces. This includes filling delay slots
and converting sequential instructions into parallel ones. This
option implies _-parallel_.
`-warn-explicit-parallel-conflicts'
Instructs `as' to produce warning messages when questionable
parallel instructions are encountered. This option is enabled by
default, but `gcc' disables it when it invokes `as' directly.
Questionable instructions are those whoes behaviour would be
different if they were executed sequentially. For example the
code fragment `mv r1, r2 || mv r3, r1' produces a different result
from `mv r1, r2 \n mv r3, r1' since the former moves r1 into r3
and then r2 into r1, whereas the later moves r2 into r1 and r3.
`-Wp'
This is a shorter synonym for the
_-warn-explicit-parallel-conflicts_ option.
`-no-warn-explicit-parallel-conflicts'
Instructs `as' not to produce warning messages when questionable
parallel instructions are encountered.
`-Wnp'
This is a shorter synonym for the
_-no-warn-explicit-parallel-conflicts_ option.
`-ignore-parallel-conflicts'
This option tells the assembler's to stop checking parallel
instructions for contraint violations. This ability is provided
for hardware vendors testing chip designs and should not be used
under normal circumstances.
`-no-ignore-parallel-conflicts'
This option restores the assembler's default behaviour of checking
parallel instructions to detect constraint violations.
`-Ip'
This is a shorter synonym for the _-ignore-parallel-conflicts_
option.
`-nIp'
This is a shorter synonym for the _-no-ignore-parallel-conflicts_
option.
`-warn-unmatched-high'
This option tells the assembler to produce a warning message if a
`.high' pseudo op is encountered without a mathcing `.low' pseudo
op. The presence of such an unmatches pseudo op usually indicates
a programming error.
`-no-warn-unmatched-high'
Disables a previously enabled _-warn-unmatched-high_ option.
`-Wuh'
This is a shorter synonym for the _-warn-unmatched-high_ option.
`-Wnuh'
This is a shorter synonym for the _-no-warn-unmatched-high_ option.
File: as.info, Node: M32R-Directives, Next: M32R-Warnings, Prev: M32R-Opts, Up: M32R-Dependent
8.17.2 M32R Directives
----------------------
The Renease M32R version of `as' has a few architecture specific
directives:
`low EXPRESSION'
The `low' directive computes the value of its expression and
places the lower 16-bits of the result into the immediate-field of
the instruction. For example:
or3 r0, r0, #low(0x12345678) ; compute r0 = r0 | 0x5678
add3, r0, r0, #low(fred) ; compute r0 = r0 + low 16-bits of address of fred
`high EXPRESSION'
The `high' directive computes the value of its expression and
places the upper 16-bits of the result into the immediate-field of
the instruction. For example:
seth r0, #high(0x12345678) ; compute r0 = 0x12340000
seth, r0, #high(fred) ; compute r0 = upper 16-bits of address of fred
`shigh EXPRESSION'
The `shigh' directive is very similar to the `high' directive. It
also computes the value of its expression and places the upper
16-bits of the result into the immediate-field of the instruction.
The difference is that `shigh' also checks to see if the lower
16-bits could be interpreted as a signed number, and if so it
assumes that a borrow will occur from the upper-16 bits. To
compensate for this the `shigh' directive pre-biases the upper 16
bit value by adding one to it. For example:
For example:
seth r0, #shigh(0x12345678) ; compute r0 = 0x12340000
seth r0, #shigh(0x00008000) ; compute r0 = 0x00010000
In the second example the lower 16-bits are 0x8000. If these are
treated as a signed value and sign extended to 32-bits then the
value becomes 0xffff8000. If this value is then added to
0x00010000 then the result is 0x00008000.
This behaviour is to allow for the different semantics of the
`or3' and `add3' instructions. The `or3' instruction treats its
16-bit immediate argument as unsigned whereas the `add3' treats
its 16-bit immediate as a signed value. So for example:
seth r0, #shigh(0x00008000)
add3 r0, r0, #low(0x00008000)
Produces the correct result in r0, whereas:
seth r0, #shigh(0x00008000)
or3 r0, r0, #low(0x00008000)
Stores 0xffff8000 into r0.
Note - the `shigh' directive does not know where in the assembly
source code the lower 16-bits of the value are going set, so it
cannot check to make sure that an `or3' instruction is being used
rather than an `add3' instruction. It is up to the programmer to
make sure that correct directives are used.
`.m32r'
The directive performs a similar thing as the _-m32r_ command line
option. It tells the assembler to only accept M32R instructions
from now on. An instructions from later M32R architectures are
refused.
`.m32rx'
The directive performs a similar thing as the _-m32rx_ command
line option. It tells the assembler to start accepting the extra
instructions in the M32RX ISA as well as the ordinary M32R ISA.
`.m32r2'
The directive performs a similar thing as the _-m32r2_ command
line option. It tells the assembler to start accepting the extra
instructions in the M32R2 ISA as well as the ordinary M32R ISA.
`.little'
The directive performs a similar thing as the _-little_ command
line option. It tells the assembler to start producing
little-endian code and data. This option should be used with care
as producing mixed-endian binary files is frought with danger.
`.big'
The directive performs a similar thing as the _-big_ command line
option. It tells the assembler to start producing big-endian code
and data. This option should be used with care as producing
mixed-endian binary files is frought with danger.
File: as.info, Node: M32R-Warnings, Prev: M32R-Directives, Up: M32R-Dependent
8.17.3 M32R Warnings
--------------------
There are several warning and error messages that can be produced by
`as' which are specific to the M32R:
`output of 1st instruction is the same as an input to 2nd instruction - is this intentional ?'
This message is only produced if warnings for explicit parallel
conflicts have been enabled. It indicates that the assembler has
encountered a parallel instruction in which the destination
register of the left hand instruction is used as an input register
in the right hand instruction. For example in this code fragment
`mv r1, r2 || neg r3, r1' register r1 is the destination of the
move instruction and the input to the neg instruction.
`output of 2nd instruction is the same as an input to 1st instruction - is this intentional ?'
This message is only produced if warnings for explicit parallel
conflicts have been enabled. It indicates that the assembler has
encountered a parallel instruction in which the destination
register of the right hand instruction is used as an input
register in the left hand instruction. For example in this code
fragment `mv r1, r2 || neg r2, r3' register r2 is the destination
of the neg instruction and the input to the move instruction.
`instruction `...' is for the M32RX only'
This message is produced when the assembler encounters an
instruction which is only supported by the M32Rx processor, and
the `-m32rx' command line flag has not been specified to allow
assembly of such instructions.
`unknown instruction `...''
This message is produced when the assembler encounters an
instruction which it does not recognise.
`only the NOP instruction can be issued in parallel on the m32r'
This message is produced when the assembler encounters a parallel
instruction which does not involve a NOP instruction and the
`-m32rx' command line flag has not been specified. Only the M32Rx
processor is able to execute two instructions in parallel.
`instruction `...' cannot be executed in parallel.'
This message is produced when the assembler encounters a parallel
instruction which is made up of one or two instructions which
cannot be executed in parallel.
`Instructions share the same execution pipeline'
This message is produced when the assembler encounters a parallel
instruction whoes components both use the same execution pipeline.
`Instructions write to the same destination register.'
This message is produced when the assembler encounters a parallel
instruction where both components attempt to modify the same
register. For example these code fragments will produce this
message: `mv r1, r2 || neg r1, r3' `jl r0 || mv r14, r1' `st r2,
@-r1 || mv r1, r3' `mv r1, r2 || ld r0, @r1+' `cmp r1, r2 || addx
r3, r4' (Both write to the condition bit)
File: as.info, Node: M68K-Dependent, Next: M68HC11-Dependent, Prev: M32R-Dependent, Up: Machine Dependencies
8.18 M680x0 Dependent Features
==============================
* Menu:
* M68K-Opts:: M680x0 Options
* M68K-Syntax:: Syntax
* M68K-Moto-Syntax:: Motorola Syntax
* M68K-Float:: Floating Point
* M68K-Directives:: 680x0 Machine Directives
* M68K-opcodes:: Opcodes
File: as.info, Node: M68K-Opts, Next: M68K-Syntax, Up: M68K-Dependent
8.18.1 M680x0 Options
---------------------
The Motorola 680x0 version of `as' has a few machine dependent options:
`-march=ARCHITECTURE'
This option specifies a target architecture. The following
architectures are recognized: `68000', `68010', `68020', `68030',
`68040', `68060', `cpu32', `isaa', `isaaplus', `isab' and `cfv4e'.
`-mcpu=CPU'
This option specifies a target cpu. When used in conjunction with
the `-march' option, the cpu must be within the specified
architecture. Also, the generic features of the architecture are
used for instruction generation, rather than those of the specific
chip.
`-m[no-]68851'
`-m[no-]68881'
`-m[no-]div'
`-m[no-]usp'
`-m[no-]float'
`-m[no-]mac'
`-m[no-]emac'
Enable or disable various architecture specific features. If a
chip or architecture by default supports an option (for instance
`-march=isaaplus' includes the `-mdiv' option), explicitly
disabling the option will override the default.
`-l'
You can use the `-l' option to shorten the size of references to
undefined symbols. If you do not use the `-l' option, references
to undefined symbols are wide enough for a full `long' (32 bits).
(Since `as' cannot know where these symbols end up, `as' can only
allocate space for the linker to fill in later. Since `as' does
not know how far away these symbols are, it allocates as much
space as it can.) If you use this option, the references are only
one word wide (16 bits). This may be useful if you want the
object file to be as small as possible, and you know that the
relevant symbols are always less than 17 bits away.
`--register-prefix-optional'
For some configurations, especially those where the compiler
normally does not prepend an underscore to the names of user
variables, the assembler requires a `%' before any use of a
register name. This is intended to let the assembler distinguish
between C variables and functions named `a0' through `a7', and so
on. The `%' is always accepted, but is not required for certain
configurations, notably `sun3'. The `--register-prefix-optional'
option may be used to permit omitting the `%' even for
configurations for which it is normally required. If this is
done, it will generally be impossible to refer to C variables and
functions with the same names as register names.
`--bitwise-or'
Normally the character `|' is treated as a comment character, which
means that it can not be used in expressions. The `--bitwise-or'
option turns `|' into a normal character. In this mode, you must
either use C style comments, or start comments with a `#' character
at the beginning of a line.
`--base-size-default-16 --base-size-default-32'
If you use an addressing mode with a base register without
specifying the size, `as' will normally use the full 32 bit value.
For example, the addressing mode `%a0@(%d0)' is equivalent to
`%a0@(%d0:l)'. You may use the `--base-size-default-16' option to
tell `as' to default to using the 16 bit value. In this case,
`%a0@(%d0)' is equivalent to `%a0@(%d0:w)'. You may use the
`--base-size-default-32' option to restore the default behaviour.
`--disp-size-default-16 --disp-size-default-32'
If you use an addressing mode with a displacement, and the value
of the displacement is not known, `as' will normally assume that
the value is 32 bits. For example, if the symbol `disp' has not
been defined, `as' will assemble the addressing mode
`%a0@(disp,%d0)' as though `disp' is a 32 bit value. You may use
the `--disp-size-default-16' option to tell `as' to instead assume
that the displacement is 16 bits. In this case, `as' will
assemble `%a0@(disp,%d0)' as though `disp' is a 16 bit value. You
may use the `--disp-size-default-32' option to restore the default
behaviour.
`--pcrel'
Always keep branches PC-relative. In the M680x0 architecture all
branches are defined as PC-relative. However, on some processors
they are limited to word displacements maximum. When `as' needs a
long branch that is not available, it normally emits an absolute
jump instead. This option disables this substitution. When this
option is given and no long branches are available, only word
branches will be emitted. An error message will be generated if a
word branch cannot reach its target. This option has no effect on
68020 and other processors that have long branches. *note Branch
Improvement: M68K-Branch.
`-m68000'
`as' can assemble code for several different members of the
Motorola 680x0 family. The default depends upon how `as' was
configured when it was built; normally, the default is to assemble
code for the 68020 microprocessor. The following options may be
used to change the default. These options control which
instructions and addressing modes are permitted. The members of
the 680x0 family are very similar. For detailed information about
the differences, see the Motorola manuals.
`-m68000'
`-m68ec000'
`-m68hc000'
`-m68hc001'
`-m68008'
`-m68302'
`-m68306'
`-m68307'
`-m68322'
`-m68356'
Assemble for the 68000. `-m68008', `-m68302', and so on are
synonyms for `-m68000', since the chips are the same from the
point of view of the assembler.
`-m68010'
Assemble for the 68010.
`-m68020'
`-m68ec020'
Assemble for the 68020. This is normally the default.
`-m68030'
`-m68ec030'
Assemble for the 68030.
`-m68040'
`-m68ec040'
Assemble for the 68040.
`-m68060'
`-m68ec060'
Assemble for the 68060.
`-mcpu32'
`-m68330'
`-m68331'
`-m68332'
`-m68333'
`-m68334'
`-m68336'
`-m68340'
`-m68341'
`-m68349'
`-m68360'
Assemble for the CPU32 family of chips.
`-m5200'
`-m5202'
`-m5204'
`-m5206'
`-m5206e'
`-m521x'
`-m5249'
`-m528x'
`-m5307'
`-m5407'
`-m547x'
`-m548x'
`-mcfv4'
`-mcfv4e'
Assemble for the ColdFire family of chips.
`-m68881'
`-m68882'
Assemble 68881 floating point instructions. This is the
default for the 68020, 68030, and the CPU32. The 68040 and
68060 always support floating point instructions.
`-mno-68881'
Do not assemble 68881 floating point instructions. This is
the default for 68000 and the 68010. The 68040 and 68060
always support floating point instructions, even if this
option is used.
`-m68851'
Assemble 68851 MMU instructions. This is the default for the
68020, 68030, and 68060. The 68040 accepts a somewhat
different set of MMU instructions; `-m68851' and `-m68040'
should not be used together.
`-mno-68851'
Do not assemble 68851 MMU instructions. This is the default
for the 68000, 68010, and the CPU32. The 68040 accepts a
somewhat different set of MMU instructions.
File: as.info, Node: M68K-Syntax, Next: M68K-Moto-Syntax, Prev: M68K-Opts, Up: M68K-Dependent
8.18.2 Syntax
-------------
This syntax for the Motorola 680x0 was developed at MIT.
The 680x0 version of `as' uses instructions names and syntax
compatible with the Sun assembler. Intervening periods are ignored;
for example, `movl' is equivalent to `mov.l'.
In the following table APC stands for any of the address registers
(`%a0' through `%a7'), the program counter (`%pc'), the zero-address
relative to the program counter (`%zpc'), a suppressed address register
(`%za0' through `%za7'), or it may be omitted entirely. The use of
SIZE means one of `w' or `l', and it may be omitted, along with the
leading colon, unless a scale is also specified. The use of SCALE
means one of `1', `2', `4', or `8', and it may always be omitted along
with the leading colon.
The following addressing modes are understood:
"Immediate"
`#NUMBER'
"Data Register"
`%d0' through `%d7'
"Address Register"
`%a0' through `%a7'
`%a7' is also known as `%sp', i.e. the Stack Pointer. `%a6' is
also known as `%fp', the Frame Pointer.
"Address Register Indirect"
`%a0@' through `%a7@'
"Address Register Postincrement"
`%a0@+' through `%a7@+'
"Address Register Predecrement"
`%a0@-' through `%a7@-'
"Indirect Plus Offset"
`APC@(NUMBER)'
"Index"
`APC@(NUMBER,REGISTER:SIZE:SCALE)'
The NUMBER may be omitted.
"Postindex"
`APC@(NUMBER)@(ONUMBER,REGISTER:SIZE:SCALE)'
The ONUMBER or the REGISTER, but not both, may be omitted.
"Preindex"
`APC@(NUMBER,REGISTER:SIZE:SCALE)@(ONUMBER)'
The NUMBER may be omitted. Omitting the REGISTER produces the
Postindex addressing mode.
"Absolute"
`SYMBOL', or `DIGITS', optionally followed by `:b', `:w', or `:l'.
File: as.info, Node: M68K-Moto-Syntax, Next: M68K-Float, Prev: M68K-Syntax, Up: M68K-Dependent
8.18.3 Motorola Syntax
----------------------
The standard Motorola syntax for this chip differs from the syntax
already discussed (*note Syntax: M68K-Syntax.). `as' can accept
Motorola syntax for operands, even if MIT syntax is used for other
operands in the same instruction. The two kinds of syntax are fully
compatible.
In the following table APC stands for any of the address registers
(`%a0' through `%a7'), the program counter (`%pc'), the zero-address
relative to the program counter (`%zpc'), or a suppressed address
register (`%za0' through `%za7'). The use of SIZE means one of `w' or
`l', and it may always be omitted along with the leading dot. The use
of SCALE means one of `1', `2', `4', or `8', and it may always be
omitted along with the leading asterisk.
The following additional addressing modes are understood:
"Address Register Indirect"
`(%a0)' through `(%a7)'
`%a7' is also known as `%sp', i.e. the Stack Pointer. `%a6' is
also known as `%fp', the Frame Pointer.
"Address Register Postincrement"
`(%a0)+' through `(%a7)+'
"Address Register Predecrement"
`-(%a0)' through `-(%a7)'
"Indirect Plus Offset"
`NUMBER(%A0)' through `NUMBER(%A7)', or `NUMBER(%PC)'.
The NUMBER may also appear within the parentheses, as in
`(NUMBER,%A0)'. When used with the PC, the NUMBER may be omitted
(with an address register, omitting the NUMBER produces Address
Register Indirect mode).
"Index"
`NUMBER(APC,REGISTER.SIZE*SCALE)'
The NUMBER may be omitted, or it may appear within the
parentheses. The APC may be omitted. The REGISTER and the APC
may appear in either order. If both APC and REGISTER are address
registers, and the SIZE and SCALE are omitted, then the first
register is taken as the base register, and the second as the
index register.
"Postindex"
`([NUMBER,APC],REGISTER.SIZE*SCALE,ONUMBER)'
The ONUMBER, or the REGISTER, or both, may be omitted. Either the
NUMBER or the APC may be omitted, but not both.
"Preindex"
`([NUMBER,APC,REGISTER.SIZE*SCALE],ONUMBER)'
The NUMBER, or the APC, or the REGISTER, or any two of them, may
be omitted. The ONUMBER may be omitted. The REGISTER and the APC
may appear in either order. If both APC and REGISTER are address
registers, and the SIZE and SCALE are omitted, then the first
register is taken as the base register, and the second as the
index register.
File: as.info, Node: M68K-Float, Next: M68K-Directives, Prev: M68K-Moto-Syntax, Up: M68K-Dependent
8.18.4 Floating Point
---------------------
Packed decimal (P) format floating literals are not supported. Feel
free to add the code!
The floating point formats generated by directives are these.
`.float'
`Single' precision floating point constants.
`.double'
`Double' precision floating point constants.
`.extend'
`.ldouble'
`Extended' precision (`long double') floating point constants.
File: as.info, Node: M68K-Directives, Next: M68K-opcodes, Prev: M68K-Float, Up: M68K-Dependent
8.18.5 680x0 Machine Directives
-------------------------------
In order to be compatible with the Sun assembler the 680x0 assembler
understands the following directives.
`.data1'
This directive is identical to a `.data 1' directive.
`.data2'
This directive is identical to a `.data 2' directive.
`.even'
This directive is a special case of the `.align' directive; it
aligns the output to an even byte boundary.
`.skip'
This directive is identical to a `.space' directive.
`.arch NAME'
Select the target architecture and extension features. Valid
valuse for NAME are the same as for the `-march' command line
option. This directive cannot be specified after any instructions
have been assembled. If it is given multiple times, or in
conjuction with the `-march' option, all uses must be for the same
architecture and extension set.
`.cpu NAME'
Select the target cpu. Valid valuse for NAME are the same as for
the `-mcpu' command line option. This directive cannot be
specified after any instructions have been assembled. If it is
given multiple times, or in conjuction with the `-mopt' option,
all uses must be for the same cpu.
File: as.info, Node: M68K-opcodes, Prev: M68K-Directives, Up: M68K-Dependent
8.18.6 Opcodes
--------------
* Menu:
* M68K-Branch:: Branch Improvement
* M68K-Chars:: Special Characters
File: as.info, Node: M68K-Branch, Next: M68K-Chars, Up: M68K-opcodes
8.18.6.1 Branch Improvement
...........................
Certain pseudo opcodes are permitted for branch instructions. They
expand to the shortest branch instruction that reach the target.
Generally these mnemonics are made by substituting `j' for `b' at the
start of a Motorola mnemonic.
The following table summarizes the pseudo-operations. A `*' flags
cases that are more fully described after the table:
Displacement
+------------------------------------------------------------
| 68020 68000/10, not PC-relative OK
Pseudo-Op |BYTE WORD LONG ABSOLUTE LONG JUMP **
+------------------------------------------------------------
jbsr |bsrs bsrw bsrl jsr
jra |bras braw bral jmp
* jXX |bXXs bXXw bXXl bNXs;jmp
* dbXX | N/A dbXXw dbXX;bras;bral dbXX;bras;jmp
fjXX | N/A fbXXw fbXXl N/A
XX: condition
NX: negative of condition XX
`*'--see full description below
`**'--this expansion mode is disallowed by `--pcrel'
`jbsr'
`jra'
These are the simplest jump pseudo-operations; they always map to
one particular machine instruction, depending on the displacement
to the branch target. This instruction will be a byte or word
branch is that is sufficient. Otherwise, a long branch will be
emitted if available. If no long branches are available and the
`--pcrel' option is not given, an absolute long jump will be
emitted instead. If no long branches are available, the `--pcrel'
option is given, and a word branch cannot reach the target, an
error message is generated.
In addition to standard branch operands, `as' allows these
pseudo-operations to have all operands that are allowed for jsr
and jmp, substituting these instructions if the operand given is
not valid for a branch instruction.
`jXX'
Here, `jXX' stands for an entire family of pseudo-operations,
where XX is a conditional branch or condition-code test. The full
list of pseudo-ops in this family is:
jhi jls jcc jcs jne jeq jvc
jvs jpl jmi jge jlt jgt jle
Usually, each of these pseudo-operations expands to a single branch
instruction. However, if a word branch is not sufficient, no long
branches are available, and the `--pcrel' option is not given, `as'
issues a longer code fragment in terms of NX, the opposite
condition to XX. For example, under these conditions:
jXX foo
gives
bNXs oof
jmp foo
oof:
`dbXX'
The full family of pseudo-operations covered here is
dbhi dbls dbcc dbcs dbne dbeq dbvc
dbvs dbpl dbmi dbge dblt dbgt dble
dbf dbra dbt
Motorola `dbXX' instructions allow word displacements only. When
a word displacement is sufficient, each of these pseudo-operations
expands to the corresponding Motorola instruction. When a word
displacement is not sufficient and long branches are available,
when the source reads `dbXX foo', `as' emits
dbXX oo1
bras oo2
oo1:bral foo
oo2:
If, however, long branches are not available and the `--pcrel'
option is not given, `as' emits
dbXX oo1
bras oo2
oo1:jmp foo
oo2:
`fjXX'
This family includes
fjne fjeq fjge fjlt fjgt fjle fjf
fjt fjgl fjgle fjnge fjngl fjngle fjngt
fjnle fjnlt fjoge fjogl fjogt fjole fjolt
fjor fjseq fjsf fjsne fjst fjueq fjuge
fjugt fjule fjult fjun
Each of these pseudo-operations always expands to a single Motorola
coprocessor branch instruction, word or long. All Motorola
coprocessor branch instructions allow both word and long
displacements.
File: as.info, Node: M68K-Chars, Prev: M68K-Branch, Up: M68K-opcodes
8.18.6.2 Special Characters
...........................
The immediate character is `#' for Sun compatibility. The line-comment
character is `|' (unless the `--bitwise-or' option is used). If a `#'
appears at the beginning of a line, it is treated as a comment unless
it looks like `# line file', in which case it is treated normally.
File: as.info, Node: M68HC11-Dependent, Next: MIPS-Dependent, Prev: M68K-Dependent, Up: Machine Dependencies
8.19 M68HC11 and M68HC12 Dependent Features
===========================================
* Menu:
* M68HC11-Opts:: M68HC11 and M68HC12 Options
* M68HC11-Syntax:: Syntax
* M68HC11-Modifiers:: Symbolic Operand Modifiers
* M68HC11-Directives:: Assembler Directives
* M68HC11-Float:: Floating Point
* M68HC11-opcodes:: Opcodes
File: as.info, Node: M68HC11-Opts, Next: M68HC11-Syntax, Up: M68HC11-Dependent
8.19.1 M68HC11 and M68HC12 Options
----------------------------------
The Motorola 68HC11 and 68HC12 version of `as' have a few machine
dependent options.
`-m68hc11'
This option switches the assembler in the M68HC11 mode. In this
mode, the assembler only accepts 68HC11 operands and mnemonics. It
produces code for the 68HC11.
`-m68hc12'
This option switches the assembler in the M68HC12 mode. In this
mode, the assembler also accepts 68HC12 operands and mnemonics. It
produces code for the 68HC12. A few 68HC11 instructions are
replaced by some 68HC12 instructions as recommended by Motorola
specifications.
`-m68hcs12'
This option switches the assembler in the M68HCS12 mode. This
mode is similar to `-m68hc12' but specifies to assemble for the
68HCS12 series. The only difference is on the assembling of the
`movb' and `movw' instruction when a PC-relative operand is used.
`-mshort'
This option controls the ABI and indicates to use a 16-bit integer
ABI. It has no effect on the assembled instructions. This is the
default.
`-mlong'
This option controls the ABI and indicates to use a 32-bit integer
ABI.
`-mshort-double'
This option controls the ABI and indicates to use a 32-bit float
ABI. This is the default.
`-mlong-double'
This option controls the ABI and indicates to use a 64-bit float
ABI.
`--strict-direct-mode'
You can use the `--strict-direct-mode' option to disable the
automatic translation of direct page mode addressing into extended
mode when the instruction does not support direct mode. For
example, the `clr' instruction does not support direct page mode
addressing. When it is used with the direct page mode, `as' will
ignore it and generate an absolute addressing. This option
prevents `as' from doing this, and the wrong usage of the direct
page mode will raise an error.
`--short-branchs'
The `--short-branchs' option turns off the translation of relative
branches into absolute branches when the branch offset is out of
range. By default `as' transforms the relative branch (`bsr',
`bgt', `bge', `beq', `bne', `ble', `blt', `bhi', `bcc', `bls',
`bcs', `bmi', `bvs', `bvs', `bra') into an absolute branch when
the offset is out of the -128 .. 127 range. In that case, the
`bsr' instruction is translated into a `jsr', the `bra'
instruction is translated into a `jmp' and the conditional branchs
instructions are inverted and followed by a `jmp'. This option
disables these translations and `as' will generate an error if a
relative branch is out of range. This option does not affect the
optimization associated to the `jbra', `jbsr' and `jbXX' pseudo
opcodes.
`--force-long-branchs'
The `--force-long-branchs' option forces the translation of
relative branches into absolute branches. This option does not
affect the optimization associated to the `jbra', `jbsr' and
`jbXX' pseudo opcodes.
`--print-insn-syntax'
You can use the `--print-insn-syntax' option to obtain the syntax
description of the instruction when an error is detected.
`--print-opcodes'
The `--print-opcodes' option prints the list of all the
instructions with their syntax. The first item of each line
represents the instruction name and the rest of the line indicates
the possible operands for that instruction. The list is printed in
alphabetical order. Once the list is printed `as' exits.
`--generate-example'
The `--generate-example' option is similar to `--print-opcodes'
but it generates an example for each instruction instead.
File: as.info, Node: M68HC11-Syntax, Next: M68HC11-Modifiers, Prev: M68HC11-Opts, Up: M68HC11-Dependent
8.19.2 Syntax
-------------
In the M68HC11 syntax, the instruction name comes first and it may be
followed by one or several operands (up to three). Operands are
separated by comma (`,'). In the normal mode, `as' will complain if too
many operands are specified for a given instruction. In the MRI mode
(turned on with `-M' option), it will treat them as comments. Example:
inx
lda #23
bset 2,x #4
brclr *bot #8 foo
The following addressing modes are understood for 68HC11 and 68HC12:
"Immediate"
`#NUMBER'
"Address Register"
`NUMBER,X', `NUMBER,Y'
The NUMBER may be omitted in which case 0 is assumed.
"Direct Addressing mode"
`*SYMBOL', or `*DIGITS'
"Absolute"
`SYMBOL', or `DIGITS'
The M68HC12 has other more complex addressing modes. All of them are
supported and they are represented below:
"Constant Offset Indexed Addressing Mode"
`NUMBER,REG'
The NUMBER may be omitted in which case 0 is assumed. The
register can be either `X', `Y', `SP' or `PC'. The assembler will
use the smaller post-byte definition according to the constant
value (5-bit constant offset, 9-bit constant offset or 16-bit
constant offset). If the constant is not known by the assembler
it will use the 16-bit constant offset post-byte and the value
will be resolved at link time.
"Offset Indexed Indirect"
`[NUMBER,REG]'
The register can be either `X', `Y', `SP' or `PC'.
"Auto Pre-Increment/Pre-Decrement/Post-Increment/Post-Decrement"
`NUMBER,-REG' `NUMBER,+REG' `NUMBER,REG-' `NUMBER,REG+'
The number must be in the range `-8'..`+8' and must not be 0. The
register can be either `X', `Y', `SP' or `PC'.
"Accumulator Offset"
`ACC,REG'
The accumulator register can be either `A', `B' or `D'. The
register can be either `X', `Y', `SP' or `PC'.
"Accumulator D offset indexed-indirect"
`[D,REG]'
The register can be either `X', `Y', `SP' or `PC'.
For example:
ldab 1024,sp
ldd [10,x]
orab 3,+x
stab -2,y-
ldx a,pc
sty [d,sp]
File: as.info, Node: M68HC11-Modifiers, Next: M68HC11-Directives, Prev: M68HC11-Syntax, Up: M68HC11-Dependent
8.19.3 Symbolic Operand Modifiers
---------------------------------
The assembler supports several modifiers when using symbol addresses in
68HC11 and 68HC12 instruction operands. The general syntax is the
following:
%modifier(symbol)
`%addr'
This modifier indicates to the assembler and linker to use the
16-bit physical address corresponding to the symbol. This is
intended to be used on memory window systems to map a symbol in
the memory bank window. If the symbol is in a memory expansion
part, the physical address corresponds to the symbol address
within the memory bank window. If the symbol is not in a memory
expansion part, this is the symbol address (using or not using the
%addr modifier has no effect in that case).
`%page'
This modifier indicates to use the memory page number corresponding
to the symbol. If the symbol is in a memory expansion part, its
page number is computed by the linker as a number used to map the
page containing the symbol in the memory bank window. If the
symbol is not in a memory expansion part, the page number is 0.
`%hi'
This modifier indicates to use the 8-bit high part of the physical
address of the symbol.
`%lo'
This modifier indicates to use the 8-bit low part of the physical
address of the symbol.
For example a 68HC12 call to a function `foo_example' stored in
memory expansion part could be written as follows:
call %addr(foo_example),%page(foo_example)
and this is equivalent to
call foo_example
And for 68HC11 it could be written as follows:
ldab #%page(foo_example)
stab _page_switch
jsr %addr(foo_example)
File: as.info, Node: M68HC11-Directives, Next: M68HC11-Float, Prev: M68HC11-Modifiers, Up: M68HC11-Dependent
8.19.4 Assembler Directives
---------------------------
The 68HC11 and 68HC12 version of `as' have the following specific
assembler directives:
`.relax'
The relax directive is used by the `GNU Compiler' to emit a
specific relocation to mark a group of instructions for linker
relaxation. The sequence of instructions within the group must be
known to the linker so that relaxation can be performed.
`.mode [mshort|mlong|mshort-double|mlong-double]'
This directive specifies the ABI. It overrides the `-mshort',
`-mlong', `-mshort-double' and `-mlong-double' options.
`.far SYMBOL'
This directive marks the symbol as a `far' symbol meaning that it
uses a `call/rtc' calling convention as opposed to `jsr/rts'.
During a final link, the linker will identify references to the
`far' symbol and will verify the proper calling convention.
`.interrupt SYMBOL'
This directive marks the symbol as an interrupt entry point. This
information is then used by the debugger to correctly unwind the
frame across interrupts.
`.xrefb SYMBOL'
This directive is defined for compatibility with the
`Specification for Motorola 8 and 16-Bit Assembly Language Input
Standard' and is ignored.
File: as.info, Node: M68HC11-Float, Next: M68HC11-opcodes, Prev: M68HC11-Directives, Up: M68HC11-Dependent
8.19.5 Floating Point
---------------------
Packed decimal (P) format floating literals are not supported. Feel
free to add the code!
The floating point formats generated by directives are these.
`.float'
`Single' precision floating point constants.
`.double'
`Double' precision floating point constants.
`.extend'
`.ldouble'
`Extended' precision (`long double') floating point constants.
File: as.info, Node: M68HC11-opcodes, Prev: M68HC11-Float, Up: M68HC11-Dependent
8.19.6 Opcodes
--------------
* Menu:
* M68HC11-Branch:: Branch Improvement
File: as.info, Node: M68HC11-Branch, Up: M68HC11-opcodes
8.19.6.1 Branch Improvement
...........................
Certain pseudo opcodes are permitted for branch instructions. They
expand to the shortest branch instruction that reach the target.
Generally these mnemonics are made by prepending `j' to the start of
Motorola mnemonic. These pseudo opcodes are not affected by the
`--short-branchs' or `--force-long-branchs' options.
The following table summarizes the pseudo-operations.
Displacement Width
+-------------------------------------------------------------+
| Options |
| --short-branchs --force-long-branchs |
+--------------------------+----------------------------------+
Op |BYTE WORD | BYTE WORD |
+--------------------------+----------------------------------+
bsr | bsr <pc-rel> <error> | jsr <abs> |
bra | bra <pc-rel> <error> | jmp <abs> |
jbsr | bsr <pc-rel> jsr <abs> | bsr <pc-rel> jsr <abs> |
jbra | bra <pc-rel> jmp <abs> | bra <pc-rel> jmp <abs> |
bXX | bXX <pc-rel> <error> | bNX +3; jmp <abs> |
jbXX | bXX <pc-rel> bNX +3; | bXX <pc-rel> bNX +3; jmp <abs> |
| jmp <abs> | |
+--------------------------+----------------------------------+
XX: condition
NX: negative of condition XX
`jbsr'
`jbra'
These are the simplest jump pseudo-operations; they always map to
one particular machine instruction, depending on the displacement
to the branch target.
`jbXX'
Here, `jbXX' stands for an entire family of pseudo-operations,
where XX is a conditional branch or condition-code test. The full
list of pseudo-ops in this family is:
jbcc jbeq jbge jbgt jbhi jbvs jbpl jblo
jbcs jbne jblt jble jbls jbvc jbmi
For the cases of non-PC relative displacements and long
displacements, `as' issues a longer code fragment in terms of NX,
the opposite condition to XX. For example, for the non-PC
relative case:
jbXX foo
gives
bNXs oof
jmp foo
oof:
File: as.info, Node: MIPS-Dependent, Next: MMIX-Dependent, Prev: M68HC11-Dependent, Up: Machine Dependencies
8.20 MIPS Dependent Features
============================
GNU `as' for MIPS architectures supports several different MIPS
processors, and MIPS ISA levels I through V, MIPS32, and MIPS64. For
information about the MIPS instruction set, see `MIPS RISC
Architecture', by Kane and Heindrich (Prentice-Hall). For an overview
of MIPS assembly conventions, see "Appendix D: Assembly Language
Programming" in the same work.
* Menu:
* MIPS Opts:: Assembler options
* MIPS Object:: ECOFF object code
* MIPS Stabs:: Directives for debugging information
* MIPS ISA:: Directives to override the ISA level
* MIPS symbol sizes:: Directives to override the size of symbols
* MIPS autoextend:: Directives for extending MIPS 16 bit instructions
* MIPS insn:: Directive to mark data as an instruction
* MIPS option stack:: Directives to save and restore options
* MIPS ASE instruction generation overrides:: Directives to control
generation of MIPS ASE instructions
File: as.info, Node: MIPS Opts, Next: MIPS Object, Up: MIPS-Dependent
8.20.1 Assembler options
------------------------
The MIPS configurations of GNU `as' support these special options:
`-G NUM'
This option sets the largest size of an object that can be
referenced implicitly with the `gp' register. It is only accepted
for targets that use ECOFF format. The default value is 8.
`-EB'
`-EL'
Any MIPS configuration of `as' can select big-endian or
little-endian output at run time (unlike the other GNU development
tools, which must be configured for one or the other). Use `-EB'
to select big-endian output, and `-EL' for little-endian.
`-mips1'
`-mips2'
`-mips3'
`-mips4'
`-mips5'
`-mips32'
`-mips32r2'
`-mips64'
`-mips64r2'
Generate code for a particular MIPS Instruction Set Architecture
level. `-mips1' corresponds to the R2000 and R3000 processors,
`-mips2' to the R6000 processor, `-mips3' to the R4000 processor,
and `-mips4' to the R8000 and R10000 processors. `-mips5',
`-mips32', `-mips32r2', `-mips64', and `-mips64r2' correspond to
generic MIPS V, MIPS32, MIPS32 RELEASE 2, MIPS64, and MIPS64
RELEASE 2 ISA processors, respectively. You can also switch
instruction sets during the assembly; see *Note Directives to
override the ISA level: MIPS ISA.
`-mgp32'
`-mfp32'
Some macros have different expansions for 32-bit and 64-bit
registers. The register sizes are normally inferred from the ISA
and ABI, but these flags force a certain group of registers to be
treated as 32 bits wide at all times. `-mgp32' controls the size
of general-purpose registers and `-mfp32' controls the size of
floating-point registers.
On some MIPS variants there is a 32-bit mode flag; when this flag
is set, 64-bit instructions generate a trap. Also, some 32-bit
OSes only save the 32-bit registers on a context switch, so it is
essential never to use the 64-bit registers.
`-mgp64'
Assume that 64-bit general purpose registers are available. This
is provided in the interests of symmetry with -gp32.
`-mips16'
`-no-mips16'
Generate code for the MIPS 16 processor. This is equivalent to
putting `.set mips16' at the start of the assembly file.
`-no-mips16' turns off this option.
`-mips3d'
`-no-mips3d'
Generate code for the MIPS-3D Application Specific Extension.
This tells the assembler to accept MIPS-3D instructions.
`-no-mips3d' turns off this option.
`-mdmx'
`-no-mdmx'
Generate code for the MDMX Application Specific Extension. This
tells the assembler to accept MDMX instructions. `-no-mdmx' turns
off this option.
`-mdsp'
`-mno-dsp'
Generate code for the DSP Application Specific Extension. This
tells the assembler to accept DSP instructions. `-mno-dsp' turns
off this option.
`-mmt'
`-mno-mt'
Generate code for the MT Application Specific Extension. This
tells the assembler to accept MT instructions. `-mno-mt' turns
off this option.
`-mfix7000'
`-mno-fix7000'
Cause nops to be inserted if the read of the destination register
of an mfhi or mflo instruction occurs in the following two
instructions.
`-mfix-vr4120'
`-no-mfix-vr4120'
Insert nops to work around certain VR4120 errata. This option is
intended to be used on GCC-generated code: it is not designed to
catch all problems in hand-written assembler code.
`-mfix-vr4130'
`-no-mfix-vr4130'
Insert nops to work around the VR4130 `mflo'/`mfhi' errata.
`-m4010'
`-no-m4010'
Generate code for the LSI R4010 chip. This tells the assembler to
accept the R4010 specific instructions (`addciu', `ffc', etc.),
and to not schedule `nop' instructions around accesses to the `HI'
and `LO' registers. `-no-m4010' turns off this option.
`-m4650'
`-no-m4650'
Generate code for the MIPS R4650 chip. This tells the assembler
to accept the `mad' and `madu' instruction, and to not schedule
`nop' instructions around accesses to the `HI' and `LO' registers.
`-no-m4650' turns off this option.
`-m3900'
`-no-m3900'
`-m4100'
`-no-m4100'
For each option `-mNNNN', generate code for the MIPS RNNNN chip.
This tells the assembler to accept instructions specific to that
chip, and to schedule for that chip's hazards.
`-march=CPU'
Generate code for a particular MIPS cpu. It is exactly equivalent
to `-mCPU', except that there are more value of CPU understood.
Valid CPU value are:
2000, 3000, 3900, 4000, 4010, 4100, 4111, vr4120, vr4130,
vr4181, 4300, 4400, 4600, 4650, 5000, rm5200, rm5230, rm5231,
rm5261, rm5721, vr5400, vr5500, 6000, rm7000, 8000, rm9000,
10000, 12000, mips32-4k, sb1
`-mtune=CPU'
Schedule and tune for a particular MIPS cpu. Valid CPU values are
identical to `-march=CPU'.
`-mabi=ABI'
Record which ABI the source code uses. The recognized arguments
are: `32', `n32', `o64', `64' and `eabi'.
`-msym32'
`-mno-sym32'
Equivalent to adding `.set sym32' or `.set nosym32' to the
beginning of the assembler input. *Note MIPS symbol sizes::.
`-nocpp'
This option is ignored. It is accepted for command-line
compatibility with other assemblers, which use it to turn off C
style preprocessing. With GNU `as', there is no need for
`-nocpp', because the GNU assembler itself never runs the C
preprocessor.
`--construct-floats'
`--no-construct-floats'
The `--no-construct-floats' option disables the construction of
double width floating point constants by loading the two halves of
the value into the two single width floating point registers that
make up the double width register. This feature is useful if the
processor support the FR bit in its status register, and this bit
is known (by the programmer) to be set. This bit prevents the
aliasing of the double width register by the single width
registers.
By default `--construct-floats' is selected, allowing construction
of these floating point constants.
`--trap'
`--no-break'
`as' automatically macro expands certain division and
multiplication instructions to check for overflow and division by
zero. This option causes `as' to generate code to take a trap
exception rather than a break exception when an error is detected.
The trap instructions are only supported at Instruction Set
Architecture level 2 and higher.
`--break'
`--no-trap'
Generate code to take a break exception rather than a trap
exception when an error is detected. This is the default.
`-mpdr'
`-mno-pdr'
Control generation of `.pdr' sections. Off by default on IRIX, on
elsewhere.
`-mshared'
`-mno-shared'
When generating code using the Unix calling conventions (selected
by `-KPIC' or `-mcall_shared'), gas will normally generate code
which can go into a shared library. The `-mno-shared' option
tells gas to generate code which uses the calling convention, but
can not go into a shared library. The resulting code is slightly
more efficient. This option only affects the handling of the
`.cpload' and `.cpsetup' pseudo-ops.
File: as.info, Node: MIPS Object, Next: MIPS Stabs, Prev: MIPS Opts, Up: MIPS-Dependent
8.20.2 MIPS ECOFF object code
-----------------------------
Assembling for a MIPS ECOFF target supports some additional sections
besides the usual `.text', `.data' and `.bss'. The additional sections
are `.rdata', used for read-only data, `.sdata', used for small data,
and `.sbss', used for small common objects.
When assembling for ECOFF, the assembler uses the `$gp' (`$28')
register to form the address of a "small object". Any object in the
`.sdata' or `.sbss' sections is considered "small" in this sense. For
external objects, or for objects in the `.bss' section, you can use the
`gcc' `-G' option to control the size of objects addressed via `$gp';
the default value is 8, meaning that a reference to any object eight
bytes or smaller uses `$gp'. Passing `-G 0' to `as' prevents it from
using the `$gp' register on the basis of object size (but the assembler
uses `$gp' for objects in `.sdata' or `sbss' in any case). The size of
an object in the `.bss' section is set by the `.comm' or `.lcomm'
directive that defines it. The size of an external object may be set
with the `.extern' directive. For example, `.extern sym,4' declares
that the object at `sym' is 4 bytes in length, whie leaving `sym'
otherwise undefined.
Using small ECOFF objects requires linker support, and assumes that
the `$gp' register is correctly initialized (normally done
automatically by the startup code). MIPS ECOFF assembly code must not
modify the `$gp' register.
File: as.info, Node: MIPS Stabs, Next: MIPS ISA, Prev: MIPS Object, Up: MIPS-Dependent
8.20.3 Directives for debugging information
-------------------------------------------
MIPS ECOFF `as' supports several directives used for generating
debugging information which are not support by traditional MIPS
assemblers. These are `.def', `.endef', `.dim', `.file', `.scl',
`.size', `.tag', `.type', `.val', `.stabd', `.stabn', and `.stabs'.
The debugging information generated by the three `.stab' directives can
only be read by GDB, not by traditional MIPS debuggers (this
enhancement is required to fully support C++ debugging). These
directives are primarily used by compilers, not assembly language
programmers!
File: as.info, Node: MIPS symbol sizes, Next: MIPS autoextend, Prev: MIPS ISA, Up: MIPS-Dependent
8.20.4 Directives to override the size of symbols
-------------------------------------------------
The n64 ABI allows symbols to have any 64-bit value. Although this
provides a great deal of flexibility, it means that some macros have
much longer expansions than their 32-bit counterparts. For example,
the non-PIC expansion of `dla $4,sym' is usually:
lui $4,%highest(sym)
lui $1,%hi(sym)
daddiu $4,$4,%higher(sym)
daddiu $1,$1,%lo(sym)
dsll32 $4,$4,0
daddu $4,$4,$1
whereas the 32-bit expansion is simply:
lui $4,%hi(sym)
daddiu $4,$4,%lo(sym)
n64 code is sometimes constructed in such a way that all symbolic
constants are known to have 32-bit values, and in such cases, it's
preferable to use the 32-bit expansion instead of the 64-bit expansion.
You can use the `.set sym32' directive to tell the assembler that,
from this point on, all expressions of the form `SYMBOL' or `SYMBOL +
OFFSET' have 32-bit values. For example:
.set sym32
dla $4,sym
lw $4,sym+16
sw $4,sym+0x8000($4)
will cause the assembler to treat `sym', `sym+16' and `sym+0x8000'
as 32-bit values. The handling of non-symbolic addresses is not
affected.
The directive `.set nosym32' ends a `.set sym32' block and reverts
to the normal behavior. It is also possible to change the symbol size
using the command-line options `-msym32' and `-mno-sym32'.
These options and directives are always accepted, but at present,
they have no effect for anything other than n64.
File: as.info, Node: MIPS ISA, Next: MIPS symbol sizes, Prev: MIPS Stabs, Up: MIPS-Dependent
8.20.5 Directives to override the ISA level
-------------------------------------------
GNU `as' supports an additional directive to change the MIPS
Instruction Set Architecture level on the fly: `.set mipsN'. N should
be a number from 0 to 5, or 32, 32r2, 64 or 64r2. The values other
than 0 make the assembler accept instructions for the corresponding ISA
level, from that point on in the assembly. `.set mipsN' affects not
only which instructions are permitted, but also how certain macros are
expanded. `.set mips0' restores the ISA level to its original level:
either the level you selected with command line options, or the default
for your configuration. You can use this feature to permit specific
R4000 instructions while assembling in 32 bit mode. Use this directive
with care!
The directive `.set mips16' puts the assembler into MIPS 16 mode, in
which it will assemble instructions for the MIPS 16 processor. Use
`.set nomips16' to return to normal 32 bit mode.
Traditional MIPS assemblers do not support this directive.
File: as.info, Node: MIPS autoextend, Next: MIPS insn, Prev: MIPS symbol sizes, Up: MIPS-Dependent
8.20.6 Directives for extending MIPS 16 bit instructions
--------------------------------------------------------
By default, MIPS 16 instructions are automatically extended to 32 bits
when necessary. The directive `.set noautoextend' will turn this off.
When `.set noautoextend' is in effect, any 32 bit instruction must be
explicitly extended with the `.e' modifier (e.g., `li.e $4,1000'). The
directive `.set autoextend' may be used to once again automatically
extend instructions when necessary.
This directive is only meaningful when in MIPS 16 mode. Traditional
MIPS assemblers do not support this directive.
File: as.info, Node: MIPS insn, Next: MIPS option stack, Prev: MIPS autoextend, Up: MIPS-Dependent
8.20.7 Directive to mark data as an instruction
-----------------------------------------------
The `.insn' directive tells `as' that the following data is actually
instructions. This makes a difference in MIPS 16 mode: when loading
the address of a label which precedes instructions, `as' automatically
adds 1 to the value, so that jumping to the loaded address will do the
right thing.
File: as.info, Node: MIPS option stack, Next: MIPS ASE instruction generation overrides, Prev: MIPS insn, Up: MIPS-Dependent
8.20.8 Directives to save and restore options
---------------------------------------------
The directives `.set push' and `.set pop' may be used to save and
restore the current settings for all the options which are controlled
by `.set'. The `.set push' directive saves the current settings on a
stack. The `.set pop' directive pops the stack and restores the
settings.
These directives can be useful inside an macro which must change an
option such as the ISA level or instruction reordering but does not want
to change the state of the code which invoked the macro.
Traditional MIPS assemblers do not support these directives.
File: as.info, Node: MIPS ASE instruction generation overrides, Prev: MIPS option stack, Up: MIPS-Dependent
8.20.9 Directives to control generation of MIPS ASE instructions
----------------------------------------------------------------
The directive `.set mips3d' makes the assembler accept instructions
from the MIPS-3D Application Specific Extension from that point on in
the assembly. The `.set nomips3d' directive prevents MIPS-3D
instructions from being accepted.
The directive `.set mdmx' makes the assembler accept instructions
from the MDMX Application Specific Extension from that point on in the
assembly. The `.set nomdmx' directive prevents MDMX instructions from
being accepted.
The directive `.set dsp' makes the assembler accept instructions
from the DSP Application Specific Extension from that point on in the
assembly. The `.set nodsp' directive prevents DSP instructions from
being accepted.
The directive `.set mt' makes the assembler accept instructions from
the MT Application Specific Extension from that point on in the
assembly. The `.set nomt' directive prevents MT instructions from
being accepted.
Traditional MIPS assemblers do not support these directives.
File: as.info, Node: MMIX-Dependent, Next: MSP430-Dependent, Prev: MIPS-Dependent, Up: Machine Dependencies
8.21 MMIX Dependent Features
============================
* Menu:
* MMIX-Opts:: Command-line Options
* MMIX-Expand:: Instruction expansion
* MMIX-Syntax:: Syntax
* MMIX-mmixal:: Differences to `mmixal' syntax and semantics
File: as.info, Node: MMIX-Opts, Next: MMIX-Expand, Up: MMIX-Dependent
8.21.1 Command-line Options
---------------------------
The MMIX version of `as' has some machine-dependent options.
When `--fixed-special-register-names' is specified, only the register
names specified in *Note MMIX-Regs:: are recognized in the instructions
`PUT' and `GET'.
You can use the `--globalize-symbols' to make all symbols global.
This option is useful when splitting up a `mmixal' program into several
files.
The `--gnu-syntax' turns off most syntax compatibility with
`mmixal'. Its usability is currently doubtful.
The `--relax' option is not fully supported, but will eventually make
the object file prepared for linker relaxation.
If you want to avoid inadvertently calling a predefined symbol and
would rather get an error, for example when using `as' with a compiler
or other machine-generated code, specify `--no-predefined-syms'. This
turns off built-in predefined definitions of all such symbols,
including rounding-mode symbols, segment symbols, `BIT' symbols, and
`TRAP' symbols used in `mmix' "system calls". It also turns off
predefined special-register names, except when used in `PUT' and `GET'
instructions.
By default, some instructions are expanded to fit the size of the
operand or an external symbol (*note MMIX-Expand::). By passing
`--no-expand', no such expansion will be done, instead causing errors
at link time if the operand does not fit.
The `mmixal' documentation (*note mmixsite::) specifies that global
registers allocated with the `GREG' directive (*note MMIX-greg::) and
initialized to the same non-zero value, will refer to the same global
register. This isn't strictly enforceable in `as' since the final
addresses aren't known until link-time, but it will do an effort unless
the `--no-merge-gregs' option is specified. (Register merging isn't
yet implemented in `ld'.)
`as' will warn every time it expands an instruction to fit an
operand unless the option `-x' is specified. It is believed that this
behaviour is more useful than just mimicking `mmixal''s behaviour, in
which instructions are only expanded if the `-x' option is specified,
and assembly fails otherwise, when an instruction needs to be expanded.
It needs to be kept in mind that `mmixal' is both an assembler and
linker, while `as' will expand instructions that at link stage can be
contracted. (Though linker relaxation isn't yet implemented in `ld'.)
The option `-x' also imples `--linker-allocated-gregs'.
If instruction expansion is enabled, `as' can expand a `PUSHJ'
instruction into a series of instructions. The shortest expansion is
to not expand it, but just mark the call as redirectable to a stub,
which `ld' creates at link-time, but only if the original `PUSHJ'
instruction is found not to reach the target. The stub consists of the
necessary instructions to form a jump to the target. This happens if
`as' can assert that the `PUSHJ' instruction can reach such a stub.
The option `--no-pushj-stubs' disables this shorter expansion, and the
longer series of instructions is then created at assembly-time. The
option `--no-stubs' is a synonym, intended for compatibility with
future releases, where generation of stubs for other instructions may
be implemented.
Usually a two-operand-expression (*note GREG-base::) without a
matching `GREG' directive is treated as an error by `as'. When the
option `--linker-allocated-gregs' is in effect, they are instead passed
through to the linker, which will allocate as many global registers as
is needed.
File: as.info, Node: MMIX-Expand, Next: MMIX-Syntax, Prev: MMIX-Opts, Up: MMIX-Dependent
8.21.2 Instruction expansion
----------------------------
When `as' encounters an instruction with an operand that is either not
known or does not fit the operand size of the instruction, `as' (and
`ld') will expand the instruction into a sequence of instructions
semantically equivalent to the operand fitting the instruction.
Expansion will take place for the following instructions:
`GETA'
Expands to a sequence of four instructions: `SETL', `INCML',
`INCMH' and `INCH'. The operand must be a multiple of four.
Conditional branches
A branch instruction is turned into a branch with the complemented
condition and prediction bit over five instructions; four
instructions setting `$255' to the operand value, which like with
`GETA' must be a multiple of four, and a final `GO $255,$255,0'.
`PUSHJ'
Similar to expansion for conditional branches; four instructions
set `$255' to the operand value, followed by a `PUSHGO
$255,$255,0'.
`JMP'
Similar to conditional branches and `PUSHJ'. The final instruction
is `GO $255,$255,0'.
The linker `ld' is expected to shrink these expansions for code
assembled with `--relax' (though not currently implemented).
File: as.info, Node: MMIX-Syntax, Next: MMIX-mmixal, Prev: MMIX-Expand, Up: MMIX-Dependent
8.21.3 Syntax
-------------
The assembly syntax is supposed to be upward compatible with that
described in Sections 1.3 and 1.4 of `The Art of Computer Programming,
Volume 1'. Draft versions of those chapters as well as other MMIX
information is located at
`http://www-cs-faculty.stanford.edu/~knuth/mmix-news.html'. Most code
examples from the mmixal package located there should work unmodified
when assembled and linked as single files, with a few noteworthy
exceptions (*note MMIX-mmixal::).
Before an instruction is emitted, the current location is aligned to
the next four-byte boundary. If a label is defined at the beginning of
the line, its value will be the aligned value.
In addition to the traditional hex-prefix `0x', a hexadecimal number
can also be specified by the prefix character `#'.
After all operands to an MMIX instruction or directive have been
specified, the rest of the line is ignored, treated as a comment.
* Menu:
* MMIX-Chars:: Special Characters
* MMIX-Symbols:: Symbols
* MMIX-Regs:: Register Names
* MMIX-Pseudos:: Assembler Directives
File: as.info, Node: MMIX-Chars, Next: MMIX-Symbols, Up: MMIX-Syntax
8.21.3.1 Special Characters
...........................
The characters `*' and `#' are line comment characters; each start a
comment at the beginning of a line, but only at the beginning of a
line. A `#' prefixes a hexadecimal number if found elsewhere on a line.
Two other characters, `%' and `!', each start a comment anywhere on
the line. Thus you can't use the `modulus' and `not' operators in
expressions normally associated with these two characters.
A `;' is a line separator, treated as a new-line, so separate
instructions can be specified on a single line.
File: as.info, Node: MMIX-Symbols, Next: MMIX-Regs, Prev: MMIX-Chars, Up: MMIX-Syntax
8.21.3.2 Symbols
................
The character `:' is permitted in identifiers. There are two
exceptions to it being treated as any other symbol character: if a
symbol begins with `:', it means that the symbol is in the global
namespace and that the current prefix should not be prepended to that
symbol (*note MMIX-prefix::). The `:' is then not considered part of
the symbol. For a symbol in the label position (first on a line), a `:'
at the end of a symbol is silently stripped off. A label is permitted,
but not required, to be followed by a `:', as with many other assembly
formats.
The character `@' in an expression, is a synonym for `.', the
current location.
In addition to the common forward and backward local symbol formats
(*note Symbol Names::), they can be specified with upper-case `B' and
`F', as in `8B' and `9F'. A local label defined for the current
position is written with a `H' appended to the number:
3H LDB $0,$1,2
This and traditional local-label formats cannot be mixed: a label
must be defined and referred to using the same format.
There's a minor caveat: just as for the ordinary local symbols, the
local symbols are translated into ordinary symbols using control
characters are to hide the ordinal number of the symbol.
Unfortunately, these symbols are not translated back in error messages.
Thus you may see confusing error messages when local symbols are used.
Control characters `\003' (control-C) and `\004' (control-D) are used
for the MMIX-specific local-symbol syntax.
The symbol `Main' is handled specially; it is always global.
By defining the symbols `__.MMIX.start..text' and
`__.MMIX.start..data', the address of respectively the `.text' and
`.data' segments of the final program can be defined, though when
linking more than one object file, the code or data in the object file
containing the symbol is not guaranteed to be start at that position;
just the final executable. *Note MMIX-loc::.
File: as.info, Node: MMIX-Regs, Next: MMIX-Pseudos, Prev: MMIX-Symbols, Up: MMIX-Syntax
8.21.3.3 Register names
.......................
Local and global registers are specified as `$0' to `$255'. The
recognized special register names are `rJ', `rA', `rB', `rC', `rD',
`rE', `rF', `rG', `rH', `rI', `rK', `rL', `rM', `rN', `rO', `rP', `rQ',
`rR', `rS', `rT', `rU', `rV', `rW', `rX', `rY', `rZ', `rBB', `rTT',
`rWW', `rXX', `rYY' and `rZZ'. A leading `:' is optional for special
register names.
Local and global symbols can be equated to register names and used in
place of ordinary registers.
Similarly for special registers, local and global symbols can be
used. Also, symbols equated from numbers and constant expressions are
allowed in place of a special register, except when either of the
options `--no-predefined-syms' and `--fixed-special-register-names' are
specified. Then only the special register names above are allowed for
the instructions having a special register operand; `GET' and `PUT'.
File: as.info, Node: MMIX-Pseudos, Prev: MMIX-Regs, Up: MMIX-Syntax
8.21.3.4 Assembler Directives
.............................
`LOC'
The `LOC' directive sets the current location to the value of the
operand field, which may include changing sections. If the
operand is a constant, the section is set to either `.data' if the
value is `0x2000000000000000' or larger, else it is set to `.text'.
Within a section, the current location may only be changed to
monotonically higher addresses. A LOC expression must be a
previously defined symbol or a "pure" constant.
An example, which sets the label PREV to the current location, and
updates the current location to eight bytes forward:
prev LOC @+8
When a LOC has a constant as its operand, a symbol
`__.MMIX.start..text' or `__.MMIX.start..data' is defined
depending on the address as mentioned above. Each such symbol is
interpreted as special by the linker, locating the section at that
address. Note that if multiple files are linked, the first object
file with that section will be mapped to that address (not
necessarily the file with the LOC definition).
`LOCAL'
Example:
LOCAL external_symbol
LOCAL 42
.local asymbol
This directive-operation generates a link-time assertion that the
operand does not correspond to a global register. The operand is
an expression that at link-time resolves to a register symbol or a
number. A number is treated as the register having that number.
There is one restriction on the use of this directive: the
pseudo-directive must be placed in a section with contents, code
or data.
`IS'
The `IS' directive:
asymbol IS an_expression
sets the symbol `asymbol' to `an_expression'. A symbol may not be
set more than once using this directive. Local labels may be set
using this directive, for example:
5H IS @+4
`GREG'
This directive reserves a global register, gives it an initial
value and optionally gives it a symbolic name. Some examples:
areg GREG
breg GREG data_value
GREG data_buffer
.greg creg, another_data_value
The symbolic register name can be used in place of a (non-special)
register. If a value isn't provided, it defaults to zero. Unless
the option `--no-merge-gregs' is specified, non-zero registers
allocated with this directive may be eliminated by `as'; another
register with the same value used in its place. Any of the
instructions `CSWAP', `GO', `LDA', `LDBU', `LDB', `LDHT', `LDOU',
`LDO', `LDSF', `LDTU', `LDT', `LDUNC', `LDVTS', `LDWU', `LDW',
`PREGO', `PRELD', `PREST', `PUSHGO', `STBU', `STB', `STCO', `STHT',
`STOU', `STSF', `STTU', `STT', `STUNC', `SYNCD', `SYNCID', can
have a value nearby an initial value in place of its second and
third operands. Here, "nearby" is defined as within the range
0...255 from the initial value of such an allocated register.
buffer1 BYTE 0,0,0,0,0
buffer2 BYTE 0,0,0,0,0
...
GREG buffer1
LDOU $42,buffer2
In the example above, the `Y' field of the `LDOUI' instruction
(LDOU with a constant Z) will be replaced with the global register
allocated for `buffer1', and the `Z' field will have the value 5,
the offset from `buffer1' to `buffer2'. The result is equivalent
to this code:
buffer1 BYTE 0,0,0,0,0
buffer2 BYTE 0,0,0,0,0
...
tmpreg GREG buffer1
LDOU $42,tmpreg,(buffer2-buffer1)
Global registers allocated with this directive are allocated in
order higher-to-lower within a file. Other than that, the exact
order of register allocation and elimination is undefined. For
example, the order is undefined when more than one file with such
directives are linked together. With the options `-x' and
`--linker-allocated-gregs', `GREG' directives for two-operand
cases like the one mentioned above can be omitted. Sufficient
global registers will then be allocated by the linker.
`BYTE'
The `BYTE' directive takes a series of operands separated by a
comma. If an operand is a string (*note Strings::), each
character of that string is emitted as a byte. Other operands
must be constant expressions without forward references, in the
range 0...255. If you need operands having expressions with
forward references, use `.byte' (*note Byte::). An operand can be
omitted, defaulting to a zero value.
`WYDE'
`TETRA'
`OCTA'
The directives `WYDE', `TETRA' and `OCTA' emit constants of two,
four and eight bytes size respectively. Before anything else
happens for the directive, the current location is aligned to the
respective constant-size boundary. If a label is defined at the
beginning of the line, its value will be that after the alignment.
A single operand can be omitted, defaulting to a zero value
emitted for the directive. Operands can be expressed as strings
(*note Strings::), in which case each character in the string is
emitted as a separate constant of the size indicated by the
directive.
`PREFIX'
The `PREFIX' directive sets a symbol name prefix to be prepended to
all symbols (except local symbols, *note MMIX-Symbols::), that are
not prefixed with `:', until the next `PREFIX' directive. Such
prefixes accumulate. For example,
PREFIX a
PREFIX b
c IS 0
defines a symbol `abc' with the value 0.
`BSPEC'
`ESPEC'
A pair of `BSPEC' and `ESPEC' directives delimit a section of
special contents (without specified semantics). Example:
BSPEC 42
TETRA 1,2,3
ESPEC
The single operand to `BSPEC' must be number in the range 0...255.
The `BSPEC' number 80 is used by the GNU binutils implementation.
File: as.info, Node: MMIX-mmixal, Prev: MMIX-Syntax, Up: MMIX-Dependent
8.21.4 Differences to `mmixal'
------------------------------
The binutils `as' and `ld' combination has a few differences in
function compared to `mmixal' (*note mmixsite::).
The replacement of a symbol with a GREG-allocated register (*note
GREG-base::) is not handled the exactly same way in `as' as in
`mmixal'. This is apparent in the `mmixal' example file `inout.mms',
where different registers with different offsets, eventually yielding
the same address, are used in the first instruction. This type of
difference should however not affect the function of any program unless
it has specific assumptions about the allocated register number.
Line numbers (in the `mmo' object format) are currently not
supported.
Expression operator precedence is not that of mmixal: operator
precedence is that of the C programming language. It's recommended to
use parentheses to explicitly specify wanted operator precedence
whenever more than one type of operators are used.
The serialize unary operator `&', the fractional division operator
`//', the logical not operator `!' and the modulus operator `%' are not
available.
Symbols are not global by default, unless the option
`--globalize-symbols' is passed. Use the `.global' directive to
globalize symbols (*note Global::).
Operand syntax is a bit stricter with `as' than `mmixal'. For
example, you can't say `addu 1,2,3', instead you must write `addu
$1,$2,3'.
You can't LOC to a lower address than those already visited (i.e.
"backwards").
A LOC directive must come before any emitted code.
Predefined symbols are visible as file-local symbols after use. (In
the ELF file, that is--the linked mmo file has no notion of a file-local
symbol.)
Some mapping of constant expressions to sections in LOC expressions
is attempted, but that functionality is easily confused and should be
avoided unless compatibility with `mmixal' is required. A LOC
expression to `0x2000000000000000' or higher, maps to the `.data'
section and lower addresses map to the `.text' section (*note
MMIX-loc::).
The code and data areas are each contiguous. Sparse programs with
far-away LOC directives will take up the same amount of space as a
contiguous program with zeros filled in the gaps between the LOC
directives. If you need sparse programs, you might try and get the
wanted effect with a linker script and splitting up the code parts into
sections (*note Section::). Assembly code for this, to be compatible
with `mmixal', would look something like:
.if 0
LOC away_expression
.else
.section away,"ax"
.fi
`as' will not execute the LOC directive and `mmixal' ignores the
lines with `.'. This construct can be used generally to help
compatibility.
Symbols can't be defined twice-not even to the same value.
Instruction mnemonics are recognized case-insensitive, though the
`IS' and `GREG' pseudo-operations must be specified in upper-case
characters.
There's no unicode support.
The following is a list of programs in `mmix.tar.gz', available at
`http://www-cs-faculty.stanford.edu/~knuth/mmix-news.html', last
checked with the version dated 2001-08-25 (md5sum
c393470cfc86fac040487d22d2bf0172) that assemble with `mmixal' but do
not assemble with `as':
`silly.mms'
LOC to a previous address.
`sim.mms'
Redefines symbol `Done'.
`test.mms'
Uses the serial operator `&'.
File: as.info, Node: MSP430-Dependent, Next: SH-Dependent, Prev: MMIX-Dependent, Up: Machine Dependencies
8.22 MSP 430 Dependent Features
===============================
* Menu:
* MSP430 Options:: Options
* MSP430 Syntax:: Syntax
* MSP430 Floating Point:: Floating Point
* MSP430 Directives:: MSP 430 Machine Directives
* MSP430 Opcodes:: Opcodes
* MSP430 Profiling Capability:: Profiling Capability
File: as.info, Node: MSP430 Options, Next: MSP430 Syntax, Up: MSP430-Dependent
8.22.1 Options
--------------
`-m'
select the mpu arch. Currently has no effect.
`-mP'
enables polymorph instructions handler.
`-mQ'
enables relaxation at assembly time. DANGEROUS!
File: as.info, Node: MSP430 Syntax, Next: MSP430 Floating Point, Prev: MSP430 Options, Up: MSP430-Dependent
8.22.2 Syntax
-------------
* Menu:
* MSP430-Macros:: Macros
* MSP430-Chars:: Special Characters
* MSP430-Regs:: Register Names
* MSP430-Ext:: Assembler Extensions
File: as.info, Node: MSP430-Macros, Next: MSP430-Chars, Up: MSP430 Syntax
8.22.2.1 Macros
...............
The macro syntax used on the MSP 430 is like that described in the MSP
430 Family Assembler Specification. Normal `as' macros should still
work.
Additional built-in macros are:
`llo(exp)'
Extracts least significant word from 32-bit expression 'exp'.
`lhi(exp)'
Extracts most significant word from 32-bit expression 'exp'.
`hlo(exp)'
Extracts 3rd word from 64-bit expression 'exp'.
`hhi(exp)'
Extracts 4rd word from 64-bit expression 'exp'.
They normally being used as an immediate source operand.
mov #llo(1), r10 ; == mov #1, r10
mov #lhi(1), r10 ; == mov #0, r10
File: as.info, Node: MSP430-Chars, Next: MSP430-Regs, Prev: MSP430-Macros, Up: MSP430 Syntax
8.22.2.2 Special Characters
...........................
`;' is the line comment character.
The character `$' in jump instructions indicates current location and
implemented only for TI syntax compatibility.
File: as.info, Node: MSP430-Regs, Next: MSP430-Ext, Prev: MSP430-Chars, Up: MSP430 Syntax
8.22.2.3 Register Names
.......................
General-purpose registers are represented by predefined symbols of the
form `rN' (for global registers), where N represents a number between
`0' and `15'. The leading letters may be in either upper or lower
case; for example, `r13' and `R7' are both valid register names.
Register names `PC', `SP' and `SR' cannot be used as register names
and will be treated as variables. Use `r0', `r1', and `r2' instead.
File: as.info, Node: MSP430-Ext, Prev: MSP430-Regs, Up: MSP430 Syntax
8.22.2.4 Assembler Extensions
.............................
`@rN'
As destination operand being treated as `0(rn)'
`0(rN)'
As source operand being treated as `@rn'
`jCOND +N'
Skips next N bytes followed by jump instruction and equivalent to
`jCOND $+N+2'
Also, there are some instructions, which cannot be found in other
assemblers. These are branch instructions, which has different opcodes
upon jump distance. They all got PC relative addressing mode.
`beq label'
A polymorph instruction which is `jeq label' in case if jump
distance within allowed range for cpu's jump instruction. If not,
this unrolls into a sequence of
jne $+6
br label
`bne label'
A polymorph instruction which is `jne label' or `jeq +4; br label'
`blt label'
A polymorph instruction which is `jl label' or `jge +4; br label'
`bltn label'
A polymorph instruction which is `jn label' or `jn +2; jmp +4; br
label'
`bltu label'
A polymorph instruction which is `jlo label' or `jhs +2; br label'
`bge label'
A polymorph instruction which is `jge label' or `jl +4; br label'
`bgeu label'
A polymorph instruction which is `jhs label' or `jlo +4; br label'
`bgt label'
A polymorph instruction which is `jeq +2; jge label' or `jeq +6;
jl +4; br label'
`bgtu label'
A polymorph instruction which is `jeq +2; jhs label' or `jeq +6;
jlo +4; br label'
`bleu label'
A polymorph instruction which is `jeq label; jlo label' or `jeq
+2; jhs +4; br label'
`ble label'
A polymorph instruction which is `jeq label; jl label' or `jeq
+2; jge +4; br label'
`jump label'
A polymorph instruction which is `jmp label' or `br label'
File: as.info, Node: MSP430 Floating Point, Next: MSP430 Directives, Prev: MSP430 Syntax, Up: MSP430-Dependent
8.22.3 Floating Point
---------------------
The MSP 430 family uses IEEE 32-bit floating-point numbers.
File: as.info, Node: MSP430 Directives, Next: MSP430 Opcodes, Prev: MSP430 Floating Point, Up: MSP430-Dependent
8.22.4 MSP 430 Machine Directives
---------------------------------
`.file'
This directive is ignored; it is accepted for compatibility with
other MSP 430 assemblers.
_Warning:_ in other versions of the GNU assembler, `.file' is
used for the directive called `.app-file' in the MSP 430
support.
`.line'
This directive is ignored; it is accepted for compatibility with
other MSP 430 assemblers.
`.arch'
Currently this directive is ignored; it is accepted for
compatibility with other MSP 430 assemblers.
`.profiler'
This directive instructs assembler to add new profile entry to the
object file.
File: as.info, Node: MSP430 Opcodes, Next: MSP430 Profiling Capability, Prev: MSP430 Directives, Up: MSP430-Dependent
8.22.5 Opcodes
--------------
`as' implements all the standard MSP 430 opcodes. No additional
pseudo-instructions are needed on this family.
For information on the 430 machine instruction set, see `MSP430
User's Manual, document slau049d', Texas Instrument, Inc.
File: as.info, Node: MSP430 Profiling Capability, Prev: MSP430 Opcodes, Up: MSP430-Dependent
8.22.6 Profiling Capability
---------------------------
It is a performance hit to use gcc's profiling approach for this tiny
target. Even more - jtag hardware facility does not perform any
profiling functions. However we've got gdb's built-in simulator where
we can do anything.
We define new section `.profiler' which holds all profiling
information. We define new pseudo operation `.profiler' which will
instruct assembler to add new profile entry to the object file. Profile
should take place at the present address.
Pseudo operation format:
`.profiler flags,function_to_profile [, cycle_corrector, extra]'
where:
`flags' is a combination of the following characters:
`s'
function entry
`x'
function exit
`i'
function is in init section
`f'
function is in fini section
`l'
library call
`c'
libc standard call
`d'
stack value demand
`I'
interrupt service routine
`P'
prologue start
`p'
prologue end
`E'
epilogue start
`e'
epilogue end
`j'
long jump / sjlj unwind
`a'
an arbitrary code fragment
`t'
extra parameter saved (a constant value like frame size)
`function_to_profile'
a function address
`cycle_corrector'
a value which should be added to the cycle counter, zero if
omitted.
`extra'
any extra parameter, zero if omitted.
For example:
.global fxx
.type fxx,@function
fxx:
.LFrameOffset_fxx=0x08
.profiler "scdP", fxx ; function entry.
; we also demand stack value to be saved
push r11
push r10
push r9
push r8
.profiler "cdpt",fxx,0, .LFrameOffset_fxx ; check stack value at this point
; (this is a prologue end)
; note, that spare var filled with
; the farme size
mov r15,r8
...
.profiler cdE,fxx ; check stack
pop r8
pop r9
pop r10
pop r11
.profiler xcde,fxx,3 ; exit adds 3 to the cycle counter
ret ; cause 'ret' insn takes 3 cycles
File: as.info, Node: PDP-11-Dependent, Next: PJ-Dependent, Prev: SH64-Dependent, Up: Machine Dependencies
8.23 PDP-11 Dependent Features
==============================
* Menu:
* PDP-11-Options:: Options
* PDP-11-Pseudos:: Assembler Directives
* PDP-11-Syntax:: DEC Syntax versus BSD Syntax
* PDP-11-Mnemonics:: Instruction Naming
* PDP-11-Synthetic:: Synthetic Instructions
File: as.info, Node: PDP-11-Options, Next: PDP-11-Pseudos, Up: PDP-11-Dependent
8.23.1 Options
--------------
The PDP-11 version of `as' has a rich set of machine dependent options.
8.23.1.1 Code Generation Options
................................
`-mpic | -mno-pic'
Generate position-independent (or position-dependent) code.
The default is to generate position-independent code.
8.23.1.2 Instruction Set Extension Options
..........................................
These options enables or disables the use of extensions over the base
line instruction set as introduced by the first PDP-11 CPU: the KA11.
Most options come in two variants: a `-m'EXTENSION that enables
EXTENSION, and a `-mno-'EXTENSION that disables EXTENSION.
The default is to enable all extensions.
`-mall | -mall-extensions'
Enable all instruction set extensions.
`-mno-extensions'
Disable all instruction set extensions.
`-mcis | -mno-cis'
Enable (or disable) the use of the commercial instruction set,
which consists of these instructions: `ADDNI', `ADDN', `ADDPI',
`ADDP', `ASHNI', `ASHN', `ASHPI', `ASHP', `CMPCI', `CMPC',
`CMPNI', `CMPN', `CMPPI', `CMPP', `CVTLNI', `CVTLN', `CVTLPI',
`CVTLP', `CVTNLI', `CVTNL', `CVTNPI', `CVTNP', `CVTPLI', `CVTPL',
`CVTPNI', `CVTPN', `DIVPI', `DIVP', `L2DR', `L3DR', `LOCCI',
`LOCC', `MATCI', `MATC', `MOVCI', `MOVC', `MOVRCI', `MOVRC',
`MOVTCI', `MOVTC', `MULPI', `MULP', `SCANCI', `SCANC', `SKPCI',
`SKPC', `SPANCI', `SPANC', `SUBNI', `SUBN', `SUBPI', and `SUBP'.
`-mcsm | -mno-csm'
Enable (or disable) the use of the `CSM' instruction.
`-meis | -mno-eis'
Enable (or disable) the use of the extended instruction set, which
consists of these instructions: `ASHC', `ASH', `DIV', `MARK',
`MUL', `RTT', `SOB' `SXT', and `XOR'.
`-mfis | -mkev11'
`-mno-fis | -mno-kev11'
Enable (or disable) the use of the KEV11 floating-point
instructions: `FADD', `FDIV', `FMUL', and `FSUB'.
`-mfpp | -mfpu | -mfp-11'
`-mno-fpp | -mno-fpu | -mno-fp-11'
Enable (or disable) the use of FP-11 floating-point instructions:
`ABSF', `ADDF', `CFCC', `CLRF', `CMPF', `DIVF', `LDCFF', `LDCIF',
`LDEXP', `LDF', `LDFPS', `MODF', `MULF', `NEGF', `SETD', `SETF',
`SETI', `SETL', `STCFF', `STCFI', `STEXP', `STF', `STFPS', `STST',
`SUBF', and `TSTF'.
`-mlimited-eis | -mno-limited-eis'
Enable (or disable) the use of the limited extended instruction
set: `MARK', `RTT', `SOB', `SXT', and `XOR'.
The -mno-limited-eis options also implies -mno-eis.
`-mmfpt | -mno-mfpt'
Enable (or disable) the use of the `MFPT' instruction.
`-mmultiproc | -mno-multiproc'
Enable (or disable) the use of multiprocessor instructions:
`TSTSET' and `WRTLCK'.
`-mmxps | -mno-mxps'
Enable (or disable) the use of the `MFPS' and `MTPS' instructions.
`-mspl | -mno-spl'
Enable (or disable) the use of the `SPL' instruction.
Enable (or disable) the use of the microcode instructions: `LDUB',
`MED', and `XFC'.
8.23.1.3 CPU Model Options
..........................
These options enable the instruction set extensions supported by a
particular CPU, and disables all other extensions.
`-mka11'
KA11 CPU. Base line instruction set only.
`-mkb11'
KB11 CPU. Enable extended instruction set and `SPL'.
`-mkd11a'
KD11-A CPU. Enable limited extended instruction set.
`-mkd11b'
KD11-B CPU. Base line instruction set only.
`-mkd11d'
KD11-D CPU. Base line instruction set only.
`-mkd11e'
KD11-E CPU. Enable extended instruction set, `MFPS', and `MTPS'.
`-mkd11f | -mkd11h | -mkd11q'
KD11-F, KD11-H, or KD11-Q CPU. Enable limited extended
instruction set, `MFPS', and `MTPS'.
`-mkd11k'
KD11-K CPU. Enable extended instruction set, `LDUB', `MED',
`MFPS', `MFPT', `MTPS', and `XFC'.
`-mkd11z'
KD11-Z CPU. Enable extended instruction set, `CSM', `MFPS',
`MFPT', `MTPS', and `SPL'.
`-mf11'
F11 CPU. Enable extended instruction set, `MFPS', `MFPT', and
`MTPS'.
`-mj11'
J11 CPU. Enable extended instruction set, `CSM', `MFPS', `MFPT',
`MTPS', `SPL', `TSTSET', and `WRTLCK'.
`-mt11'
T11 CPU. Enable limited extended instruction set, `MFPS', and
`MTPS'.
8.23.1.4 Machine Model Options
..............................
These options enable the instruction set extensions supported by a
particular machine model, and disables all other extensions.
`-m11/03'
Same as `-mkd11f'.
`-m11/04'
Same as `-mkd11d'.
`-m11/05 | -m11/10'
Same as `-mkd11b'.
`-m11/15 | -m11/20'
Same as `-mka11'.
`-m11/21'
Same as `-mt11'.
`-m11/23 | -m11/24'
Same as `-mf11'.
`-m11/34'
Same as `-mkd11e'.
`-m11/34a'
Ame as `-mkd11e' `-mfpp'.
`-m11/35 | -m11/40'
Same as `-mkd11a'.
`-m11/44'
Same as `-mkd11z'.
`-m11/45 | -m11/50 | -m11/55 | -m11/70'
Same as `-mkb11'.
`-m11/53 | -m11/73 | -m11/83 | -m11/84 | -m11/93 | -m11/94'
Same as `-mj11'.
`-m11/60'
Same as `-mkd11k'.
File: as.info, Node: PDP-11-Pseudos, Next: PDP-11-Syntax, Prev: PDP-11-Options, Up: PDP-11-Dependent
8.23.2 Assembler Directives
---------------------------
The PDP-11 version of `as' has a few machine dependent assembler
directives.
`.bss'
Switch to the `bss' section.
`.even'
Align the location counter to an even number.
File: as.info, Node: PDP-11-Syntax, Next: PDP-11-Mnemonics, Prev: PDP-11-Pseudos, Up: PDP-11-Dependent
8.23.3 PDP-11 Assembly Language Syntax
--------------------------------------
`as' supports both DEC syntax and BSD syntax. The only difference is
that in DEC syntax, a `#' character is used to denote an immediate
constants, while in BSD syntax the character for this purpose is `$'.
eneral-purpose registers are named `r0' through `r7'. Mnemonic
alternatives for `r6' and `r7' are `sp' and `pc', respectively.
Floating-point registers are named `ac0' through `ac3', or
alternatively `fr0' through `fr3'.
Comments are started with a `#' or a `/' character, and extend to
the end of the line. (FIXME: clash with immediates?)
File: as.info, Node: PDP-11-Mnemonics, Next: PDP-11-Synthetic, Prev: PDP-11-Syntax, Up: PDP-11-Dependent
8.23.4 Instruction Naming
-------------------------
Some instructions have alternative names.
`BCC'
`BHIS'
`BCS'
`BLO'
`L2DR'
`L2D'
`L3DR'
`L3D'
`SYS'
`TRAP'
File: as.info, Node: PDP-11-Synthetic, Prev: PDP-11-Mnemonics, Up: PDP-11-Dependent
8.23.5 Synthetic Instructions
-----------------------------
The `JBR' and `J'CC synthetic instructions are not supported yet.
File: as.info, Node: PJ-Dependent, Next: PPC-Dependent, Prev: PDP-11-Dependent, Up: Machine Dependencies
8.24 picoJava Dependent Features
================================
* Menu:
* PJ Options:: Options
File: as.info, Node: PJ Options, Up: PJ-Dependent
8.24.1 Options
--------------
`as' has two additional command-line options for the picoJava
architecture.
`-ml'
This option selects little endian data output.
`-mb'
This option selects big endian data output.
File: as.info, Node: PPC-Dependent, Next: Sparc-Dependent, Prev: PJ-Dependent, Up: Machine Dependencies
8.25 PowerPC Dependent Features
===============================
* Menu:
* PowerPC-Opts:: Options
* PowerPC-Pseudo:: PowerPC Assembler Directives
File: as.info, Node: PowerPC-Opts, Next: PowerPC-Pseudo, Up: PPC-Dependent
8.25.1 Options
--------------
The PowerPC chip family includes several successive levels, using the
same core instruction set, but including a few additional instructions
at each level. There are exceptions to this however. For details on
what instructions each variant supports, please see the chip's
architecture reference manual.
The following table lists all available PowerPC options.
`-mpwrx | -mpwr2'
Generate code for POWER/2 (RIOS2).
`-mpwr'
Generate code for POWER (RIOS1)
`-m601'
Generate code for PowerPC 601.
`-mppc, -mppc32, -m603, -m604'
Generate code for PowerPC 603/604.
`-m403, -m405'
Generate code for PowerPC 403/405.
`-m440'
Generate code for PowerPC 440. BookE and some 405 instructions.
`-m7400, -m7410, -m7450, -m7455'
Generate code for PowerPC 7400/7410/7450/7455.
`-mppc64, -m620'
Generate code for PowerPC 620/625/630.
`-mppc64bridge'
Generate code for PowerPC 64, including bridge insns.
`-mbooke64'
Generate code for 64-bit BookE.
`-mbooke, mbooke32'
Generate code for 32-bit BookE.
`-me300'
Generate code for PowerPC e300 family.
`-maltivec'
Generate code for processors with AltiVec instructions.
`-mpower4'
Generate code for Power4 architecture.
`-mpower5'
Generate code for Power5 architecture.
`-mcom'
Generate code Power/PowerPC common instructions.
`-many'
Generate code for any architecture (PWR/PWRX/PPC).
`-mregnames'
Allow symbolic names for registers.
`-mno-regnames'
Do not allow symbolic names for registers.
`-mrelocatable'
Support for GCC's -mrelocatble option.
`-mrelocatable-lib'
Support for GCC's -mrelocatble-lib option.
`-memb'
Set PPC_EMB bit in ELF flags.
`-mlittle, -mlittle-endian'
Generate code for a little endian machine.
`-mbig, -mbig-endian'
Generate code for a big endian machine.
`-msolaris'
Generate code for Solaris.
`-mno-solaris'
Do not generate code for Solaris.
File: as.info, Node: PowerPC-Pseudo, Prev: PowerPC-Opts, Up: PPC-Dependent
8.25.2 PowerPC Assembler Directives
-----------------------------------
A number of assembler directives are available for PowerPC. The
following table is far from complete.
`.machine "string"'
This directive allows you to change the machine for which code is
generated. `"string"' may be any of the -m cpu selection options
(without the -m) enclosed in double quotes, `"push"', or `"pop"'.
`.machine "push"' saves the currently selected cpu, which may be
restored with `.machine "pop"'.
File: as.info, Node: SH-Dependent, Next: SH64-Dependent, Prev: MSP430-Dependent, Up: Machine Dependencies
8.26 Renesas / SuperH SH Dependent Features
===========================================
* Menu:
* SH Options:: Options
* SH Syntax:: Syntax
* SH Floating Point:: Floating Point
* SH Directives:: SH Machine Directives
* SH Opcodes:: Opcodes
File: as.info, Node: SH Options, Next: SH Syntax, Up: SH-Dependent
8.26.1 Options
--------------
`as' has following command-line options for the Renesas (formerly
Hitachi) / SuperH SH family.
`--little'
Generate little endian code.
`--big'
Generate big endian code.
`--relax'
Alter jump instructions for long displacements.
`--small'
Align sections to 4 byte boundaries, not 16.
`--dsp'
Enable sh-dsp insns, and disable sh3e / sh4 insns.
`--renesas'
Disable optimization with section symbol for compatibility with
Renesas assembler.
`--allow-reg-prefix'
Allow '$' as a register name prefix.
`--isa=sh4 | sh4a'
Specify the sh4 or sh4a instruction set.
`--isa=dsp'
Enable sh-dsp insns, and disable sh3e / sh4 insns.
`--isa=fp'
Enable sh2e, sh3e, sh4, and sh4a insn sets.
`--isa=all'
Enable sh1, sh2, sh2e, sh3, sh3e, sh4, sh4a, and sh-dsp insn sets.
File: as.info, Node: SH Syntax, Next: SH Floating Point, Prev: SH Options, Up: SH-Dependent
8.26.2 Syntax
-------------
* Menu:
* SH-Chars:: Special Characters
* SH-Regs:: Register Names
* SH-Addressing:: Addressing Modes
File: as.info, Node: SH-Chars, Next: SH-Regs, Up: SH Syntax
8.26.2.1 Special Characters
...........................
`!' is the line comment character.
You can use `;' instead of a newline to separate statements.
Since `$' has no special meaning, you may use it in symbol names.
File: as.info, Node: SH-Regs, Next: SH-Addressing, Prev: SH-Chars, Up: SH Syntax
8.26.2.2 Register Names
.......................
You can use the predefined symbols `r0', `r1', `r2', `r3', `r4', `r5',
`r6', `r7', `r8', `r9', `r10', `r11', `r12', `r13', `r14', and `r15' to
refer to the SH registers.
The SH also has these control registers:
`pr'
procedure register (holds return address)
`pc'
program counter
`mach'
`macl'
high and low multiply accumulator registers
`sr'
status register
`gbr'
global base register
`vbr'
vector base register (for interrupt vectors)
File: as.info, Node: SH-Addressing, Prev: SH-Regs, Up: SH Syntax
8.26.2.3 Addressing Modes
.........................
`as' understands the following addressing modes for the SH. `RN' in
the following refers to any of the numbered registers, but _not_ the
control registers.
`RN'
Register direct
`@RN'
Register indirect
`@-RN'
Register indirect with pre-decrement
`@RN+'
Register indirect with post-increment
`@(DISP, RN)'
Register indirect with displacement
`@(R0, RN)'
Register indexed
`@(DISP, GBR)'
`GBR' offset
`@(R0, GBR)'
GBR indexed
`ADDR'
`@(DISP, PC)'
PC relative address (for branch or for addressing memory). The
`as' implementation allows you to use the simpler form ADDR
anywhere a PC relative address is called for; the alternate form
is supported for compatibility with other assemblers.
`#IMM'
Immediate data
File: as.info, Node: SH Floating Point, Next: SH Directives, Prev: SH Syntax, Up: SH-Dependent
8.26.3 Floating Point
---------------------
SH2E, SH3E and SH4 groups have on-chip floating-point unit (FPU). Other
SH groups can use `.float' directive to generate IEEE floating-point
numbers.
SH2E and SH3E support single-precision floating point calculations as
well as entirely PCAPI compatible emulation of double-precision
floating point calculations. SH2E and SH3E instructions are a subset of
the floating point calculations conforming to the IEEE754 standard.
In addition to single-precision and double-precision floating-point
operation capability, the on-chip FPU of SH4 has a 128-bit graphic
engine that enables 32-bit floating-point data to be processed 128 bits
at a time. It also supports 4 * 4 array operations and inner product
operations. Also, a superscalar architecture is employed that enables
simultaneous execution of two instructions (including FPU
instructions), providing performance of up to twice that of
conventional architectures at the same frequency.
File: as.info, Node: SH Directives, Next: SH Opcodes, Prev: SH Floating Point, Up: SH-Dependent
8.26.4 SH Machine Directives
----------------------------
`uaword'
`ualong'
`as' will issue a warning when a misaligned `.word' or `.long'
directive is used. You may use `.uaword' or `.ualong' to indicate
that the value is intentionally misaligned.
File: as.info, Node: SH Opcodes, Prev: SH Directives, Up: SH-Dependent
8.26.5 Opcodes
--------------
For detailed information on the SH machine instruction set, see
`SH-Microcomputer User's Manual' (Renesas) or `SH-4 32-bit CPU Core
Architecture' (SuperH) and `SuperH (SH) 64-Bit RISC Series' (SuperH).
`as' implements all the standard SH opcodes. No additional
pseudo-instructions are needed on this family. Note, however, that
because `as' supports a simpler form of PC-relative addressing, you may
simply write (for example)
mov.l bar,r0
where other assemblers might require an explicit displacement to `bar'
from the program counter:
mov.l @(DISP, PC)
Here is a summary of SH opcodes:
Legend:
Rn a numbered register
Rm another numbered register
#imm immediate data
disp displacement
disp8 8-bit displacement
disp12 12-bit displacement
add #imm,Rn lds.l @Rn+,PR
add Rm,Rn mac.w @Rm+,@Rn+
addc Rm,Rn mov #imm,Rn
addv Rm,Rn mov Rm,Rn
and #imm,R0 mov.b Rm,@(R0,Rn)
and Rm,Rn mov.b Rm,@-Rn
and.b #imm,@(R0,GBR) mov.b Rm,@Rn
bf disp8 mov.b @(disp,Rm),R0
bra disp12 mov.b @(disp,GBR),R0
bsr disp12 mov.b @(R0,Rm),Rn
bt disp8 mov.b @Rm+,Rn
clrmac mov.b @Rm,Rn
clrt mov.b R0,@(disp,Rm)
cmp/eq #imm,R0 mov.b R0,@(disp,GBR)
cmp/eq Rm,Rn mov.l Rm,@(disp,Rn)
cmp/ge Rm,Rn mov.l Rm,@(R0,Rn)
cmp/gt Rm,Rn mov.l Rm,@-Rn
cmp/hi Rm,Rn mov.l Rm,@Rn
cmp/hs Rm,Rn mov.l @(disp,Rn),Rm
cmp/pl Rn mov.l @(disp,GBR),R0
cmp/pz Rn mov.l @(disp,PC),Rn
cmp/str Rm,Rn mov.l @(R0,Rm),Rn
div0s Rm,Rn mov.l @Rm+,Rn
div0u mov.l @Rm,Rn
div1 Rm,Rn mov.l R0,@(disp,GBR)
exts.b Rm,Rn mov.w Rm,@(R0,Rn)
exts.w Rm,Rn mov.w Rm,@-Rn
extu.b Rm,Rn mov.w Rm,@Rn
extu.w Rm,Rn mov.w @(disp,Rm),R0
jmp @Rn mov.w @(disp,GBR),R0
jsr @Rn mov.w @(disp,PC),Rn
ldc Rn,GBR mov.w @(R0,Rm),Rn
ldc Rn,SR mov.w @Rm+,Rn
ldc Rn,VBR mov.w @Rm,Rn
ldc.l @Rn+,GBR mov.w R0,@(disp,Rm)
ldc.l @Rn+,SR mov.w R0,@(disp,GBR)
ldc.l @Rn+,VBR mova @(disp,PC),R0
lds Rn,MACH movt Rn
lds Rn,MACL muls Rm,Rn
lds Rn,PR mulu Rm,Rn
lds.l @Rn+,MACH neg Rm,Rn
lds.l @Rn+,MACL negc Rm,Rn
nop stc VBR,Rn
not Rm,Rn stc.l GBR,@-Rn
or #imm,R0 stc.l SR,@-Rn
or Rm,Rn stc.l VBR,@-Rn
or.b #imm,@(R0,GBR) sts MACH,Rn
rotcl Rn sts MACL,Rn
rotcr Rn sts PR,Rn
rotl Rn sts.l MACH,@-Rn
rotr Rn sts.l MACL,@-Rn
rte sts.l PR,@-Rn
rts sub Rm,Rn
sett subc Rm,Rn
shal Rn subv Rm,Rn
shar Rn swap.b Rm,Rn
shll Rn swap.w Rm,Rn
shll16 Rn tas.b @Rn
shll2 Rn trapa #imm
shll8 Rn tst #imm,R0
shlr Rn tst Rm,Rn
shlr16 Rn tst.b #imm,@(R0,GBR)
shlr2 Rn xor #imm,R0
shlr8 Rn xor Rm,Rn
sleep xor.b #imm,@(R0,GBR)
stc GBR,Rn xtrct Rm,Rn
stc SR,Rn
File: as.info, Node: SH64-Dependent, Next: PDP-11-Dependent, Prev: SH-Dependent, Up: Machine Dependencies
8.27 SuperH SH64 Dependent Features
===================================
* Menu:
* SH64 Options:: Options
* SH64 Syntax:: Syntax
* SH64 Directives:: SH64 Machine Directives
* SH64 Opcodes:: Opcodes
File: as.info, Node: SH64 Options, Next: SH64 Syntax, Up: SH64-Dependent
8.27.1 Options
--------------
`-isa=sh4 | sh4a'
Specify the sh4 or sh4a instruction set.
`-isa=dsp'
Enable sh-dsp insns, and disable sh3e / sh4 insns.
`-isa=fp'
Enable sh2e, sh3e, sh4, and sh4a insn sets.
`-isa=all'
Enable sh1, sh2, sh2e, sh3, sh3e, sh4, sh4a, and sh-dsp insn sets.
`-isa=shmedia | -isa=shcompact'
Specify the default instruction set. `SHmedia' specifies the
32-bit opcodes, and `SHcompact' specifies the 16-bit opcodes
compatible with previous SH families. The default depends on the
ABI selected; the default for the 64-bit ABI is SHmedia, and the
default for the 32-bit ABI is SHcompact. If neither the ABI nor
the ISA is specified, the default is 32-bit SHcompact.
Note that the `.mode' pseudo-op is not permitted if the ISA is not
specified on the command line.
`-abi=32 | -abi=64'
Specify the default ABI. If the ISA is specified and the ABI is
not, the default ABI depends on the ISA, with SHmedia defaulting
to 64-bit and SHcompact defaulting to 32-bit.
Note that the `.abi' pseudo-op is not permitted if the ABI is not
specified on the command line. When the ABI is specified on the
command line, any `.abi' pseudo-ops in the source must match it.
`-shcompact-const-crange'
Emit code-range descriptors for constants in SHcompact code
sections.
`-no-mix'
Disallow SHmedia code in the same section as constants and
SHcompact code.
`-no-expand'
Do not expand MOVI, PT, PTA or PTB instructions.
`-expand-pt32'
With -abi=64, expand PT, PTA and PTB instructions to 32 bits only.
File: as.info, Node: SH64 Syntax, Next: SH64 Directives, Prev: SH64 Options, Up: SH64-Dependent
8.27.2 Syntax
-------------
* Menu:
* SH64-Chars:: Special Characters
* SH64-Regs:: Register Names
* SH64-Addressing:: Addressing Modes
File: as.info, Node: SH64-Chars, Next: SH64-Regs, Up: SH64 Syntax
8.27.2.1 Special Characters
...........................
`!' is the line comment character.
You can use `;' instead of a newline to separate statements.
Since `$' has no special meaning, you may use it in symbol names.
File: as.info, Node: SH64-Regs, Next: SH64-Addressing, Prev: SH64-Chars, Up: SH64 Syntax
8.27.2.2 Register Names
.......................
You can use the predefined symbols `r0' through `r63' to refer to the
SH64 general registers, `cr0' through `cr63' for control registers,
`tr0' through `tr7' for target address registers, `fr0' through `fr63'
for single-precision floating point registers, `dr0' through `dr62'
(even numbered registers only) for double-precision floating point
registers, `fv0' through `fv60' (multiples of four only) for
single-precision floating point vectors, `fp0' through `fp62' (even
numbered registers only) for single-precision floating point pairs,
`mtrx0' through `mtrx48' (multiples of 16 only) for 4x4 matrices of
single-precision floating point registers, `pc' for the program
counter, and `fpscr' for the floating point status and control register.
You can also refer to the control registers by the mnemonics `sr',
`ssr', `pssr', `intevt', `expevt', `pexpevt', `tra', `spc', `pspc',
`resvec', `vbr', `tea', `dcr', `kcr0', `kcr1', `ctc', and `usr'.
File: as.info, Node: SH64-Addressing, Prev: SH64-Regs, Up: SH64 Syntax
8.27.2.3 Addressing Modes
.........................
SH64 operands consist of either a register or immediate value. The
immediate value can be a constant or label reference (or portion of a
label reference), as in this example:
movi 4,r2
pt function, tr4
movi (function >> 16) & 65535,r0
shori function & 65535, r0
ld.l r0,4,r0
Instruction label references can reference labels in either SHmedia
or SHcompact. To differentiate between the two, labels in SHmedia
sections will always have the least significant bit set (i.e. they will
be odd), which SHcompact labels will have the least significant bit
reset (i.e. they will be even). If you need to reference the actual
address of a label, you can use the `datalabel' modifier, as in this
example:
.long function
.long datalabel function
In that example, the first longword may or may not have the least
significant bit set depending on whether the label is an SHmedia label
or an SHcompact label. The second longword will be the actual address
of the label, regardless of what type of label it is.
File: as.info, Node: SH64 Directives, Next: SH64 Opcodes, Prev: SH64 Syntax, Up: SH64-Dependent
8.27.3 SH64 Machine Directives
------------------------------
In addition to the SH directives, the SH64 provides the following
directives:
`.mode [shmedia|shcompact]'
`.isa [shmedia|shcompact]'
Specify the ISA for the following instructions (the two directives
are equivalent). Note that programs such as `objdump' rely on
symbolic labels to determine when such mode switches occur (by
checking the least significant bit of the label's address), so
such mode/isa changes should always be followed by a label (in
practice, this is true anyway). Note that you cannot use these
directives if you didn't specify an ISA on the command line.
`.abi [32|64]'
Specify the ABI for the following instructions. Note that you
cannot use this directive unless you specified an ABI on the
command line, and the ABIs specified must match.
`.uaquad'
Like .uaword and .ualong, this allows you to specify an
intentionally unaligned quadword (64 bit word).
File: as.info, Node: SH64 Opcodes, Prev: SH64 Directives, Up: SH64-Dependent
8.27.4 Opcodes
--------------
For detailed information on the SH64 machine instruction set, see
`SuperH 64 bit RISC Series Architecture Manual' (SuperH, Inc.).
`as' implements all the standard SH64 opcodes. In addition, the
following pseudo-opcodes may be expanded into one or more alternate
opcodes:
`movi'
If the value doesn't fit into a standard `movi' opcode, `as' will
replace the `movi' with a sequence of `movi' and `shori' opcodes.
`pt'
This expands to a sequence of `movi' and `shori' opcode, followed
by a `ptrel' opcode, or to a `pta' or `ptb' opcode, depending on
the label referenced.
File: as.info, Node: Sparc-Dependent, Next: TIC54X-Dependent, Prev: PPC-Dependent, Up: Machine Dependencies
8.28 SPARC Dependent Features
=============================
* Menu:
* Sparc-Opts:: Options
* Sparc-Aligned-Data:: Option to enforce aligned data
* Sparc-Float:: Floating Point
* Sparc-Directives:: Sparc Machine Directives
File: as.info, Node: Sparc-Opts, Next: Sparc-Aligned-Data, Up: Sparc-Dependent
8.28.1 Options
--------------
The SPARC chip family includes several successive levels, using the same
core instruction set, but including a few additional instructions at
each level. There are exceptions to this however. For details on what
instructions each variant supports, please see the chip's architecture
reference manual.
By default, `as' assumes the core instruction set (SPARC v6), but
"bumps" the architecture level as needed: it switches to successively
higher architectures as it encounters instructions that only exist in
the higher levels.
If not configured for SPARC v9 (`sparc64-*-*') GAS will not bump
passed sparclite by default, an option must be passed to enable the v9
instructions.
GAS treats sparclite as being compatible with v8, unless an
architecture is explicitly requested. SPARC v9 is always incompatible
with sparclite.
`-Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite'
`-Av8plus | -Av8plusa | -Av9 | -Av9a'
Use one of the `-A' options to select one of the SPARC
architectures explicitly. If you select an architecture
explicitly, `as' reports a fatal error if it encounters an
instruction or feature requiring an incompatible or higher level.
`-Av8plus' and `-Av8plusa' select a 32 bit environment.
`-Av9' and `-Av9a' select a 64 bit environment and are not
available unless GAS is explicitly configured with 64 bit
environment support.
`-Av8plusa' and `-Av9a' enable the SPARC V9 instruction set with
UltraSPARC extensions.
`-xarch=v8plus | -xarch=v8plusa'
For compatibility with the Solaris v9 assembler. These options are
equivalent to -Av8plus and -Av8plusa, respectively.
`-bump'
Warn whenever it is necessary to switch to another level. If an
architecture level is explicitly requested, GAS will not issue
warnings until that level is reached, and will then bump the level
as required (except between incompatible levels).
`-32 | -64'
Select the word size, either 32 bits or 64 bits. These options
are only available with the ELF object file format, and require
that the necessary BFD support has been included.
File: as.info, Node: Sparc-Aligned-Data, Next: Sparc-Float, Prev: Sparc-Opts, Up: Sparc-Dependent
8.28.2 Enforcing aligned data
-----------------------------
SPARC GAS normally permits data to be misaligned. For example, it
permits the `.long' pseudo-op to be used on a byte boundary. However,
the native SunOS and Solaris assemblers issue an error when they see
misaligned data.
You can use the `--enforce-aligned-data' option to make SPARC GAS
also issue an error about misaligned data, just as the SunOS and Solaris
assemblers do.
The `--enforce-aligned-data' option is not the default because gcc
issues misaligned data pseudo-ops when it initializes certain packed
data structures (structures defined using the `packed' attribute). You
may have to assemble with GAS in order to initialize packed data
structures in your own code.
File: as.info, Node: Sparc-Float, Next: Sparc-Directives, Prev: Sparc-Aligned-Data, Up: Sparc-Dependent
8.28.3 Floating Point
---------------------
The Sparc uses IEEE floating-point numbers.
File: as.info, Node: Sparc-Directives, Prev: Sparc-Float, Up: Sparc-Dependent
8.28.4 Sparc Machine Directives
-------------------------------
The Sparc version of `as' supports the following additional machine
directives:
`.align'
This must be followed by the desired alignment in bytes.
`.common'
This must be followed by a symbol name, a positive number, and
`"bss"'. This behaves somewhat like `.comm', but the syntax is
different.
`.half'
This is functionally identical to `.short'.
`.nword'
On the Sparc, the `.nword' directive produces native word sized
value, ie. if assembling with -32 it is equivalent to `.word', if
assembling with -64 it is equivalent to `.xword'.
`.proc'
This directive is ignored. Any text following it on the same line
is also ignored.
`.register'
This directive declares use of a global application or system
register. It must be followed by a register name %g2, %g3, %g6 or
%g7, comma and the symbol name for that register. If symbol name
is `#scratch', it is a scratch register, if it is `#ignore', it
just suppresses any errors about using undeclared global register,
but does not emit any information about it into the object file.
This can be useful e.g. if you save the register before use and
restore it after.
`.reserve'
This must be followed by a symbol name, a positive number, and
`"bss"'. This behaves somewhat like `.lcomm', but the syntax is
different.
`.seg'
This must be followed by `"text"', `"data"', or `"data1"'. It
behaves like `.text', `.data', or `.data 1'.
`.skip'
This is functionally identical to the `.space' directive.
`.word'
On the Sparc, the `.word' directive produces 32 bit values,
instead of the 16 bit values it produces on many other machines.
`.xword'
On the Sparc V9 processor, the `.xword' directive produces 64 bit
values.
File: as.info, Node: TIC54X-Dependent, Next: V850-Dependent, Prev: Sparc-Dependent, Up: Machine Dependencies
8.29 TIC54X Dependent Features
==============================
* Menu:
* TIC54X-Opts:: Command-line Options
* TIC54X-Block:: Blocking
* TIC54X-Env:: Environment Settings
* TIC54X-Constants:: Constants Syntax
* TIC54X-Subsyms:: String Substitution
* TIC54X-Locals:: Local Label Syntax
* TIC54X-Builtins:: Builtin Assembler Math Functions
* TIC54X-Ext:: Extended Addressing Support
* TIC54X-Directives:: Directives
* TIC54X-Macros:: Macro Features
* TIC54X-MMRegs:: Memory-mapped Registers
File: as.info, Node: TIC54X-Opts, Next: TIC54X-Block, Up: TIC54X-Dependent
8.29.1 Options
--------------
The TMS320C54x version of `as' has a few machine-dependent options.
You can use the `-mfar-mode' option to enable extended addressing
mode. All addresses will be assumed to be > 16 bits, and the
appropriate relocation types will be used. This option is equivalent
to using the `.far_mode' directive in the assembly code. If you do not
use the `-mfar-mode' option, all references will be assumed to be 16
bits. This option may be abbreviated to `-mf'.
You can use the `-mcpu' option to specify a particular CPU. This
option is equivalent to using the `.version' directive in the assembly
code. For recognized CPU codes, see *Note `.version':
TIC54X-Directives. The default CPU version is `542'.
You can use the `-merrors-to-file' option to redirect error output
to a file (this provided for those deficient environments which don't
provide adequate output redirection). This option may be abbreviated to
`-me'.
File: as.info, Node: TIC54X-Block, Next: TIC54X-Env, Prev: TIC54X-Opts, Up: TIC54X-Dependent
8.29.2 Blocking
---------------
A blocked section or memory block is guaranteed not to cross the
blocking boundary (usually a page, or 128 words) if it is smaller than
the blocking size, or to start on a page boundary if it is larger than
the blocking size.
File: as.info, Node: TIC54X-Env, Next: TIC54X-Constants, Prev: TIC54X-Block, Up: TIC54X-Dependent
8.29.3 Environment Settings
---------------------------
`C54XDSP_DIR' and `A_DIR' are semicolon-separated paths which are added
to the list of directories normally searched for source and include
files. `C54XDSP_DIR' will override `A_DIR'.
File: as.info, Node: TIC54X-Constants, Next: TIC54X-Subsyms, Prev: TIC54X-Env, Up: TIC54X-Dependent
8.29.4 Constants Syntax
-----------------------
The TIC54X version of `as' allows the following additional constant
formats, using a suffix to indicate the radix:
Binary `000000B, 011000b'
Octal `10Q, 224q'
Hexadecimal `45h, 0FH'
File: as.info, Node: TIC54X-Subsyms, Next: TIC54X-Locals, Prev: TIC54X-Constants, Up: TIC54X-Dependent
8.29.5 String Substitution
--------------------------
A subset of allowable symbols (which we'll call subsyms) may be assigned
arbitrary string values. This is roughly equivalent to C preprocessor
#define macros. When `as' encounters one of these symbols, the symbol
is replaced in the input stream by its string value. Subsym names
*must* begin with a letter.
Subsyms may be defined using the `.asg' and `.eval' directives
(*Note `.asg': TIC54X-Directives, *Note `.eval': TIC54X-Directives.
Expansion is recursive until a previously encountered symbol is
seen, at which point substitution stops.
In this example, x is replaced with SYM2; SYM2 is replaced with
SYM1, and SYM1 is replaced with x. At this point, x has already been
encountered and the substitution stops.
.asg "x",SYM1
.asg "SYM1",SYM2
.asg "SYM2",x
add x,a ; final code assembled is "add x, a"
Macro parameters are converted to subsyms; a side effect of this is
the normal `as' '\ARG' dereferencing syntax is unnecessary. Subsyms
defined within a macro will have global scope, unless the `.var'
directive is used to identify the subsym as a local macro variable
*note `.var': TIC54X-Directives.
Substitution may be forced in situations where replacement might be
ambiguous by placing colons on either side of the subsym. The following
code:
.eval "10",x
LAB:X: add #x, a
When assembled becomes:
LAB10 add #10, a
Smaller parts of the string assigned to a subsym may be accessed with
the following syntax:
``:SYMBOL(CHAR_INDEX):''
Evaluates to a single-character string, the character at
CHAR_INDEX.
``:SYMBOL(START,LENGTH):''
Evaluates to a substring of SYMBOL beginning at START with length
LENGTH.
File: as.info, Node: TIC54X-Locals, Next: TIC54X-Builtins, Prev: TIC54X-Subsyms, Up: TIC54X-Dependent
8.29.6 Local Labels
-------------------
Local labels may be defined in two ways:
* $N, where N is a decimal number between 0 and 9
* LABEL?, where LABEL is any legal symbol name.
Local labels thus defined may be redefined or automatically
generated. The scope of a local label is based on when it may be
undefined or reset. This happens when one of the following situations
is encountered:
* .newblock directive *note `.newblock': TIC54X-Directives.
* The current section is changed (.sect, .text, or .data)
* Entering or leaving an included file
* The macro scope where the label was defined is exited
File: as.info, Node: TIC54X-Builtins, Next: TIC54X-Ext, Prev: TIC54X-Locals, Up: TIC54X-Dependent
8.29.7 Math Builtins
--------------------
The following built-in functions may be used to generate a
floating-point value. All return a floating-point value except `$cvi',
`$int', and `$sgn', which return an integer value.
``$acos(EXPR)''
Returns the floating point arccosine of EXPR.
``$asin(EXPR)''
Returns the floating point arcsine of EXPR.
``$atan(EXPR)''
Returns the floating point arctangent of EXPR.
``$atan2(EXPR1,EXPR2)''
Returns the floating point arctangent of EXPR1 / EXPR2.
``$ceil(EXPR)''
Returns the smallest integer not less than EXPR as floating point.
``$cosh(EXPR)''
Returns the floating point hyperbolic cosine of EXPR.
``$cos(EXPR)''
Returns the floating point cosine of EXPR.
``$cvf(EXPR)''
Returns the integer value EXPR converted to floating-point.
``$cvi(EXPR)''
Returns the floating point value EXPR converted to integer.
``$exp(EXPR)''
Returns the floating point value e ^ EXPR.
``$fabs(EXPR)''
Returns the floating point absolute value of EXPR.
``$floor(EXPR)''
Returns the largest integer that is not greater than EXPR as
floating point.
``$fmod(EXPR1,EXPR2)''
Returns the floating point remainder of EXPR1 / EXPR2.
``$int(EXPR)''
Returns 1 if EXPR evaluates to an integer, zero otherwise.
``$ldexp(EXPR1,EXPR2)''
Returns the floating point value EXPR1 * 2 ^ EXPR2.
``$log10(EXPR)''
Returns the base 10 logarithm of EXPR.
``$log(EXPR)''
Returns the natural logarithm of EXPR.
``$max(EXPR1,EXPR2)''
Returns the floating point maximum of EXPR1 and EXPR2.
``$min(EXPR1,EXPR2)''
Returns the floating point minimum of EXPR1 and EXPR2.
``$pow(EXPR1,EXPR2)''
Returns the floating point value EXPR1 ^ EXPR2.
``$round(EXPR)''
Returns the nearest integer to EXPR as a floating point number.
``$sgn(EXPR)''
Returns -1, 0, or 1 based on the sign of EXPR.
``$sin(EXPR)''
Returns the floating point sine of EXPR.
``$sinh(EXPR)''
Returns the floating point hyperbolic sine of EXPR.
``$sqrt(EXPR)''
Returns the floating point square root of EXPR.
``$tan(EXPR)''
Returns the floating point tangent of EXPR.
``$tanh(EXPR)''
Returns the floating point hyperbolic tangent of EXPR.
``$trunc(EXPR)''
Returns the integer value of EXPR truncated towards zero as
floating point.
File: as.info, Node: TIC54X-Ext, Next: TIC54X-Directives, Prev: TIC54X-Builtins, Up: TIC54X-Dependent
8.29.8 Extended Addressing
--------------------------
The `LDX' pseudo-op is provided for loading the extended addressing bits
of a label or address. For example, if an address `_label' resides in
extended program memory, the value of `_label' may be loaded as follows:
ldx #_label,16,a ; loads extended bits of _label
or #_label,a ; loads lower 16 bits of _label
bacc a ; full address is in accumulator A
File: as.info, Node: TIC54X-Directives, Next: TIC54X-Macros, Prev: TIC54X-Ext, Up: TIC54X-Dependent
8.29.9 Directives
-----------------
`.align [SIZE]'
`.even'
Align the section program counter on the next boundary, based on
SIZE. SIZE may be any power of 2. `.even' is equivalent to
`.align' with a SIZE of 2.
`1'
Align SPC to word boundary
`2'
Align SPC to longword boundary (same as .even)
`128'
Align SPC to page boundary
`.asg STRING, NAME'
Assign NAME the string STRING. String replacement is performed on
STRING before assignment.
`.eval STRING, NAME'
Evaluate the contents of string STRING and assign the result as a
string to the subsym NAME. String replacement is performed on
STRING before assignment.
`.bss SYMBOL, SIZE [, [BLOCKING_FLAG] [,ALIGNMENT_FLAG]]'
Reserve space for SYMBOL in the .bss section. SIZE is in words.
If present, BLOCKING_FLAG indicates the allocated space should be
aligned on a page boundary if it would otherwise cross a page
boundary. If present, ALIGNMENT_FLAG causes the assembler to
allocate SIZE on a long word boundary.
`.byte VALUE [,...,VALUE_N]'
`.ubyte VALUE [,...,VALUE_N]'
`.char VALUE [,...,VALUE_N]'
`.uchar VALUE [,...,VALUE_N]'
Place one or more bytes into consecutive words of the current
section. The upper 8 bits of each word is zero-filled. If a
label is used, it points to the word allocated for the first byte
encountered.
`.clink ["SECTION_NAME"]'
Set STYP_CLINK flag for this section, which indicates to the
linker that if no symbols from this section are referenced, the
section should not be included in the link. If SECTION_NAME is
omitted, the current section is used.
`.c_mode'
TBD.
`.copy "FILENAME" | FILENAME'
`.include "FILENAME" | FILENAME'
Read source statements from FILENAME. The normal include search
path is used. Normally .copy will cause statements from the
included file to be printed in the assembly listing and .include
will not, but this distinction is not currently implemented.
`.data'
Begin assembling code into the .data section.
`.double VALUE [,...,VALUE_N]'
`.ldouble VALUE [,...,VALUE_N]'
`.float VALUE [,...,VALUE_N]'
`.xfloat VALUE [,...,VALUE_N]'
Place an IEEE single-precision floating-point representation of
one or more floating-point values into the current section. All
but `.xfloat' align the result on a longword boundary. Values are
stored most-significant word first.
`.drlist'
`.drnolist'
Control printing of directives to the listing file. Ignored.
`.emsg STRING'
`.mmsg STRING'
`.wmsg STRING'
Emit a user-defined error, message, or warning, respectively.
`.far_mode'
Use extended addressing when assembling statements. This should
appear only once per file, and is equivalent to the -mfar-mode
option *note `-mfar-mode': TIC54X-Opts.
`.fclist'
`.fcnolist'
Control printing of false conditional blocks to the listing file.
`.field VALUE [,SIZE]'
Initialize a bitfield of SIZE bits in the current section. If
VALUE is relocatable, then SIZE must be 16. SIZE defaults to 16
bits. If VALUE does not fit into SIZE bits, the value will be
truncated. Successive `.field' directives will pack starting at
the current word, filling the most significant bits first, and
aligning to the start of the next word if the field size does not
fit into the space remaining in the current word. A `.align'
directive with an operand of 1 will force the next `.field'
directive to begin packing into a new word. If a label is used, it
points to the word that contains the specified field.
`.global SYMBOL [,...,SYMBOL_N]'
`.def SYMBOL [,...,SYMBOL_N]'
`.ref SYMBOL [,...,SYMBOL_N]'
`.def' nominally identifies a symbol defined in the current file
and availalbe to other files. `.ref' identifies a symbol used in
the current file but defined elsewhere. Both map to the standard
`.global' directive.
`.half VALUE [,...,VALUE_N]'
`.uhalf VALUE [,...,VALUE_N]'
`.short VALUE [,...,VALUE_N]'
`.ushort VALUE [,...,VALUE_N]'
`.int VALUE [,...,VALUE_N]'
`.uint VALUE [,...,VALUE_N]'
`.word VALUE [,...,VALUE_N]'
`.uword VALUE [,...,VALUE_N]'
Place one or more values into consecutive words of the current
section. If a label is used, it points to the word allocated for
the first value encountered.
`.label SYMBOL'
Define a special SYMBOL to refer to the load time address of the
current section program counter.
`.length'
`.width'
Set the page length and width of the output listing file. Ignored.
`.list'
`.nolist'
Control whether the source listing is printed. Ignored.
`.long VALUE [,...,VALUE_N]'
`.ulong VALUE [,...,VALUE_N]'
`.xlong VALUE [,...,VALUE_N]'
Place one or more 32-bit values into consecutive words in the
current section. The most significant word is stored first.
`.long' and `.ulong' align the result on a longword boundary;
`xlong' does not.
`.loop [COUNT]'
`.break [CONDITION]'
`.endloop'
Repeatedly assemble a block of code. `.loop' begins the block, and
`.endloop' marks its termination. COUNT defaults to 1024, and
indicates the number of times the block should be repeated.
`.break' terminates the loop so that assembly begins after the
`.endloop' directive. The optional CONDITION will cause the loop
to terminate only if it evaluates to zero.
`MACRO_NAME .macro [PARAM1][,...PARAM_N]'
`[.mexit]'
`.endm'
See the section on macros for more explanation (*Note
TIC54X-Macros::.
`.mlib "FILENAME" | FILENAME'
Load the macro library FILENAME. FILENAME must be an archived
library (BFD ar-compatible) of text files, expected to contain
only macro definitions. The standard include search path is used.
`.mlist'
`.mnolist'
Control whether to include macro and loop block expansions in the
listing output. Ignored.
`.mmregs'
Define global symbolic names for the 'c54x registers. Supposedly
equivalent to executing `.set' directives for each register with
its memory-mapped value, but in reality is provided only for
compatibility and does nothing.
`.newblock'
This directive resets any TIC54X local labels currently defined.
Normal `as' local labels are unaffected.
`.option OPTION_LIST'
Set listing options. Ignored.
`.sblock "SECTION_NAME" | SECTION_NAME [,"NAME_N" | NAME_N]'
Designate SECTION_NAME for blocking. Blocking guarantees that a
section will start on a page boundary (128 words) if it would
otherwise cross a page boundary. Only initialized sections may be
designated with this directive. See also *Note TIC54X-Block::.
`.sect "SECTION_NAME"'
Define a named initialized section and make it the current section.
`SYMBOL .set "VALUE"'
`SYMBOL .equ "VALUE"'
Equate a constant VALUE to a SYMBOL, which is placed in the symbol
table. SYMBOL may not be previously defined.
`.space SIZE_IN_BITS'
`.bes SIZE_IN_BITS'
Reserve the given number of bits in the current section and
zero-fill them. If a label is used with `.space', it points to the
*first* word reserved. With `.bes', the label points to the
*last* word reserved.
`.sslist'
`.ssnolist'
Controls the inclusion of subsym replacement in the listing
output. Ignored.
`.string "STRING" [,...,"STRING_N"]'
`.pstring "STRING" [,...,"STRING_N"]'
Place 8-bit characters from STRING into the current section.
`.string' zero-fills the upper 8 bits of each word, while
`.pstring' puts two characters into each word, filling the
most-significant bits first. Unused space is zero-filled. If a
label is used, it points to the first word initialized.
`[STAG] .struct [OFFSET]'
`[NAME_1] element [COUNT_1]'
`[NAME_2] element [COUNT_2]'
`[TNAME] .tag STAGX [TCOUNT]'
`...'
`[NAME_N] element [COUNT_N]'
`[SSIZE] .endstruct'
`LABEL .tag [STAG]'
Assign symbolic offsets to the elements of a structure. STAG
defines a symbol to use to reference the structure. OFFSET
indicates a starting value to use for the first element
encountered; otherwise it defaults to zero. Each element can have
a named offset, NAME, which is a symbol assigned the value of the
element's offset into the structure. If STAG is missing, these
become global symbols. COUNT adjusts the offset that many times,
as if `element' were an array. `element' may be one of `.byte',
`.word', `.long', `.float', or any equivalent of those, and the
structure offset is adjusted accordingly. `.field' and `.string'
are also allowed; the size of `.field' is one bit, and `.string'
is considered to be one word in size. Only element descriptors,
structure/union tags, `.align' and conditional assembly directives
are allowed within `.struct'/`.endstruct'. `.align' aligns member
offsets to word boundaries only. SSIZE, if provided, will always
be assigned the size of the structure.
The `.tag' directive, in addition to being used to define a
structure/union element within a structure, may be used to apply a
structure to a symbol. Once applied to LABEL, the individual
structure elements may be applied to LABEL to produce the desired
offsets using LABEL as the structure base.
`.tab'
Set the tab size in the output listing. Ignored.
`[UTAG] .union'
`[NAME_1] element [COUNT_1]'
`[NAME_2] element [COUNT_2]'
`[TNAME] .tag UTAGX[,TCOUNT]'
`...'
`[NAME_N] element [COUNT_N]'
`[USIZE] .endstruct'
`LABEL .tag [UTAG]'
Similar to `.struct', but the offset after each element is reset to
zero, and the USIZE is set to the maximum of all defined elements.
Starting offset for the union is always zero.
`[SYMBOL] .usect "SECTION_NAME", SIZE, [,[BLOCKING_FLAG] [,ALIGNMENT_FLAG]]'
Reserve space for variables in a named, uninitialized section
(similar to .bss). `.usect' allows definitions sections
independent of .bss. SYMBOL points to the first location reserved
by this allocation. The symbol may be used as a variable name.
SIZE is the allocated size in words. BLOCKING_FLAG indicates
whether to block this section on a page boundary (128 words)
(*note TIC54X-Block::). ALIGNMENT FLAG indicates whether the
section should be longword-aligned.
`.var SYM[,..., SYM_N]'
Define a subsym to be a local variable within a macro. See *Note
TIC54X-Macros::.
`.version VERSION'
Set which processor to build instructions for. Though the
following values are accepted, the op is ignored.
`541'
`542'
`543'
`545'
`545LP'
`546LP'
`548'
`549'
File: as.info, Node: TIC54X-Macros, Next: TIC54X-MMRegs, Prev: TIC54X-Directives, Up: TIC54X-Dependent
8.29.10 Macros
--------------
Macros do not require explicit dereferencing of arguments (i.e. \ARG).
During macro expansion, the macro parameters are converted to
subsyms. If the number of arguments passed the macro invocation
exceeds the number of parameters defined, the last parameter is
assigned the string equivalent of all remaining arguments. If fewer
arguments are given than parameters, the missing parameters are
assigned empty strings. To include a comma in an argument, you must
enclose the argument in quotes.
The following built-in subsym functions allow examination of the
string value of subsyms (or ordinary strings). The arguments are
strings unless otherwise indicated (subsyms passed as args will be
replaced by the strings they represent).
``$symlen(STR)''
Returns the length of STR.
``$symcmp(STR1,STR2)''
Returns 0 if STR1 == STR2, non-zero otherwise.
``$firstch(STR,CH)''
Returns index of the first occurrence of character constant CH in
STR.
``$lastch(STR,CH)''
Returns index of the last occurrence of character constant CH in
STR.
``$isdefed(SYMBOL)''
Returns zero if the symbol SYMBOL is not in the symbol table,
non-zero otherwise.
``$ismember(SYMBOL,LIST)''
Assign the first member of comma-separated string LIST to SYMBOL;
LIST is reassigned the remainder of the list. Returns zero if
LIST is a null string. Both arguments must be subsyms.
``$iscons(EXPR)''
Returns 1 if string EXPR is binary, 2 if octal, 3 if hexadecimal,
4 if a character, 5 if decimal, and zero if not an integer.
``$isname(NAME)''
Returns 1 if NAME is a valid symbol name, zero otherwise.
``$isreg(REG)''
Returns 1 if REG is a valid predefined register name (AR0-AR7
only).
``$structsz(STAG)''
Returns the size of the structure or union represented by STAG.
``$structacc(STAG)''
Returns the reference point of the structure or union represented
by STAG. Always returns zero.
File: as.info, Node: TIC54X-MMRegs, Prev: TIC54X-Macros, Up: TIC54X-Dependent
8.29.11 Memory-mapped Registers
-------------------------------
The following symbols are recognized as memory-mapped registers:
File: as.info, Node: Z80-Dependent, Next: Z8000-Dependent, Prev: Xtensa-Dependent, Up: Machine Dependencies
8.30 Z80 Dependent Features
===========================
* Menu:
* Z80 Options:: Options
* Z80 Syntax:: Syntax
* Z80 Floating Point:: Floating Point
* Z80 Directives:: Z80 Machine Directives
* Z80 Opcodes:: Opcodes
File: as.info, Node: Z80 Options, Next: Z80 Syntax, Up: Z80-Dependent
8.30.1 Options
--------------
The Zilog Z80 and Ascii R800 version of `as' have a few machine
dependent options.
`-z80'
Produce code for the Z80 processor. There are additional options to
request warnings and error messages for undocumented instructions.
`-ignore-undocumented-instructions'
`-Wnud'
Silently assemble undocumented Z80-instructions that have been
adopted as documented R800-instructions.
`-ignore-unportable-instructions'
`-Wnup'
Silently assemble all undocumented Z80-instructions.
`-warn-undocumented-instructions'
`-Wud'
Issue warnings for undocumented Z80-instructions that work on
R800, do not assemble other undocumented instructions without
warning.
`-warn-unportable-instructions'
`-Wup'
Issue warnings for other undocumented Z80-instructions, do not
treat any undocumented instructions as errors.
`-forbid-undocumented-instructions'
`-Fud'
Treat all undocumented z80-instructions as errors.
`-forbid-unportable-instructions'
`-Fup'
Treat undocumented z80-instructions that do not work on R800 as
errors.
`-r800'
Produce code for the R800 processor. The assembler does not support
undocumented instructions for the R800. In line with common
practice, `as' uses Z80 instriction names for the R800 processor,
as far as they exist.
File: as.info, Node: Z80 Syntax, Next: Z80 Floating Point, Prev: Z80 Options, Up: Z80-Dependent
8.30.2 Syntax
-------------
The assembler syntax closely follows the 'Z80 family CPU User Manual' by
Zilog. In expressions a single `=' may be used as "is equal to"
comparison operator.
Suffices can be used to indicate the radix of integer constants; `H'
or `h' for hexadecimal, `D' or `d' for decimal, `Q', `O', `q' or `o'
for octal, and `B' for binary.
The suffix `b' denotes a backreference to local label.
* Menu:
* Z80-Chars:: Special Characters
* Z80-Regs:: Register Names
* Z80-Case:: Case Sensitivity
File: as.info, Node: Z80-Chars, Next: Z80-Regs, Up: Z80 Syntax
8.30.2.1 Special Characters
...........................
The semicolon `;' is the line comment character;
The dollar sign `$' can be used as a prefix for hexadecimal numbers
and as a symbol denoting the current location counter.
A backslash `\' is an ordinary character for the Z80 assembler.
The single quote `'' must be followed by a closing quote. If there
is one character inbetween, it is a character constant, otherwise it is
a string constant.
File: as.info, Node: Z80-Regs, Next: Z80-Case, Prev: Z80-Chars, Up: Z80 Syntax
8.30.2.2 Register Names
.......................
The registers are referred to with the letters assigned to them by
Zilog. In addition `as' recognises `ixl' and `ixh' as the least and
most significant octet in `ix', and similarly `iyl' and `iyh' as parts
of `iy'.
File: as.info, Node: Z80-Case, Prev: Z80-Regs, Up: Z80 Syntax
8.30.2.3 Case Sensitivity
.........................
Upper and lower case are equivalent in register names, opcodes,
condition codes and assembler directives. The case of letters is
significant in labels and symbol names. The case is also important to
distinguish the suffix `b' for a backward reference to a local label
from the suffix `B' for a number in binary notation.
File: as.info, Node: Z80 Floating Point, Next: Z80 Directives, Prev: Z80 Syntax, Up: Z80-Dependent
8.30.3 Floating Point
---------------------
Floating-point numbers are not supported.
File: as.info, Node: Z80 Directives, Next: Z80 Opcodes, Prev: Z80 Floating Point, Up: Z80-Dependent
8.30.4 Z80 Assembler Directives
-------------------------------
`as' for the Z80 supports some additional directives for compatibility
with other assemblers.
These are the additional directives in `as' for the Z80:
`db EXPRESSION|STRING[,EXPRESSION|STRING...]'
`defb EXPRESSION|STRING[,EXPRESSION|STRING...]'
For each STRING the characters are copied to the object file, for
each other EXPRESSION the value is stored in one byte. A warning
is issued in case of an overflow.
`dw EXPRESSION[,EXPRESSION...]'
`defw EXPRESSION[,EXPRESSION...]'
For each EXPRESSION the value is stored in two bytes, ignoring
overflow.
`d24 EXPRESSION[,EXPRESSION...]'
`def24 EXPRESSION[,EXPRESSION...]'
For each EXPRESSION the value is stored in three bytes, ignoring
overflow.
`d32 EXPRESSION[,EXPRESSION...]'
`def32 EXPRESSION[,EXPRESSION...]'
For each EXPRESSION the value is stored in four bytes, ignoring
overflow.
`ds COUNT[, VALUE]'
`defs COUNT[, VALUE]'
Fill COUNT bytes in the object file with VALUE, if VALUE is
omitted it defaults to zero.
`SYMBOL equ EXPRESSION'
`SYMBOL defl EXPRESSION'
These directives set the value of SYMBOL to EXPRESSION. If `equ'
is used, it is an error if SYMBOL is already defined. Symbols
defined with `equ' are not protected from redefinition.
`set'
This is a normal instruction on Z80, and not an assembler
directive.
`psect NAME'
A synonym for *Note Section::, no second argument should be given.
File: as.info, Node: Z80 Opcodes, Prev: Z80 Directives, Up: Z80-Dependent
8.30.5 Opcodes
--------------
In line with commmon practice Z80 mnonics are used for both the Z80 and
the R800.
In many instructions it is possible to use one of the half index
registers (`ixl',`ixh',`iyl',`iyh') in stead of an 8-bit general
purpose register. This yields instructions that are documented on the
R800 and undocumented on the Z80. Similarly `in f,(c)' is documented
on the R800 and undocumented on the Z80.
The assembler also supports the following undocumented
Z80-instructions, that have not been adopted in the R800 instruction
set:
`out (c),0'
Sends zero to the port pointed to by register c.
`sli M'
Equivalent to `M = (M<<1)+1', the operand M can be any operand
that is valid for `sla'. One can use `sll' as a synonym for `sli'.
`OP (ix+D), R'
This is equivalent to
ld R, (ix+D)
OPC R
ld (ix+D), R
The operation `OPC' may be any of `res B,', `set B,', `rl', `rlc',
`rr', `rrc', `sla', `sli', `sra' and `srl', and the register `R'
may be any of `a', `b', `c', `d', `e', `h' and `l'.
`OPC (iy+D), R'
As above, but with `iy' instead of `ix'.
The web site at `http://www.z80.info' is a good starting place to
find more information on programming the Z80.
File: as.info, Node: Z8000-Dependent, Next: Vax-Dependent, Prev: Z80-Dependent, Up: Machine Dependencies
8.31 Z8000 Dependent Features
=============================
The Z8000 as supports both members of the Z8000 family: the
unsegmented Z8002, with 16 bit addresses, and the segmented Z8001 with
24 bit addresses.
When the assembler is in unsegmented mode (specified with the
`unsegm' directive), an address takes up one word (16 bit) sized
register. When the assembler is in segmented mode (specified with the
`segm' directive), a 24-bit address takes up a long (32 bit) register.
*Note Assembler Directives for the Z8000: Z8000 Directives, for a list
of other Z8000 specific assembler directives.
* Menu:
* Z8000 Options:: Command-line options for the Z8000
* Z8000 Syntax:: Assembler syntax for the Z8000
* Z8000 Directives:: Special directives for the Z8000
* Z8000 Opcodes:: Opcodes
File: as.info, Node: Z8000 Options, Next: Z8000 Syntax, Up: Z8000-Dependent
8.31.1 Options
--------------
`-z8001'
Generate segmented code by default.
`-z8002'
Generate unsegmented code by default.
File: as.info, Node: Z8000 Syntax, Next: Z8000 Directives, Prev: Z8000 Options, Up: Z8000-Dependent
8.31.2 Syntax
-------------
* Menu:
* Z8000-Chars:: Special Characters
* Z8000-Regs:: Register Names
* Z8000-Addressing:: Addressing Modes
File: as.info, Node: Z8000-Chars, Next: Z8000-Regs, Up: Z8000 Syntax
8.31.2.1 Special Characters
...........................
`!' is the line comment character.
You can use `;' instead of a newline to separate statements.
File: as.info, Node: Z8000-Regs, Next: Z8000-Addressing, Prev: Z8000-Chars, Up: Z8000 Syntax
8.31.2.2 Register Names
.......................
The Z8000 has sixteen 16 bit registers, numbered 0 to 15. You can refer
to different sized groups of registers by register number, with the
prefix `r' for 16 bit registers, `rr' for 32 bit registers and `rq' for
64 bit registers. You can also refer to the contents of the first
eight (of the sixteen 16 bit registers) by bytes. They are named `rlN'
and `rhN'.
_byte registers_
rl0 rh0 rl1 rh1 rl2 rh2 rl3 rh3
rl4 rh4 rl5 rh5 rl6 rh6 rl7 rh7
_word registers_
r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15
_long word registers_
rr0 rr2 rr4 rr6 rr8 rr10 rr12 rr14
_quad word registers_
rq0 rq4 rq8 rq12
File: as.info, Node: Z8000-Addressing, Prev: Z8000-Regs, Up: Z8000 Syntax
8.31.2.3 Addressing Modes
.........................
as understands the following addressing modes for the Z8000:
`rlN'
`rhN'
`rN'
`rrN'
`rqN'
Register direct: 8bit, 16bit, 32bit, and 64bit registers.
`@rN'
`@rrN'
Indirect register: @rrN in segmented mode, @rN in unsegmented
mode.
`ADDR'
Direct: the 16 bit or 24 bit address (depending on whether the
assembler is in segmented or unsegmented mode) of the operand is
in the instruction.
`address(rN)'
Indexed: the 16 or 24 bit address is added to the 16 bit register
to produce the final address in memory of the operand.
`rN(#IMM)'
`rrN(#IMM)'
Base Address: the 16 or 24 bit register is added to the 16 bit sign
extended immediate displacement to produce the final address in
memory of the operand.
`rN(rM)'
`rrN(rM)'
Base Index: the 16 or 24 bit register rN or rrN is added to the
sign extended 16 bit index register rM to produce the final
address in memory of the operand.
`#XX'
Immediate data XX.
File: as.info, Node: Z8000 Directives, Next: Z8000 Opcodes, Prev: Z8000 Syntax, Up: Z8000-Dependent
8.31.3 Assembler Directives for the Z8000
-----------------------------------------
The Z8000 port of as includes additional assembler directives, for
compatibility with other Z8000 assemblers. These do not begin with `.'
(unlike the ordinary as directives).
`segm'
`.z8001'
Generate code for the segmented Z8001.
`unsegm'
`.z8002'
Generate code for the unsegmented Z8002.
`name'
Synonym for `.file'
`global'
Synonym for `.global'
`wval'
Synonym for `.word'
`lval'
Synonym for `.long'
`bval'
Synonym for `.byte'
`sval'
Assemble a string. `sval' expects one string literal, delimited by
single quotes. It assembles each byte of the string into
consecutive addresses. You can use the escape sequence `%XX'
(where XX represents a two-digit hexadecimal number) to represent
the character whose ASCII value is XX. Use this feature to
describe single quote and other characters that may not appear in
string literals as themselves. For example, the C statement
`char *a = "he said \"it's 50% off\"";' is represented in Z8000
assembly language (shown with the assembler output in hex at the
left) as
68652073 sval 'he said %22it%27s 50%25 off%22%00'
61696420
22697427
73203530
25206F66
662200
`rsect'
synonym for `.section'
`block'
synonym for `.space'
`even'
special case of `.align'; aligns output to even byte boundary.
File: as.info, Node: Z8000 Opcodes, Prev: Z8000 Directives, Up: Z8000-Dependent
8.31.4 Opcodes
--------------
For detailed information on the Z8000 machine instruction set, see
`Z8000 Technical Manual'.
The following table summarizes the opcodes and their arguments:
rs 16 bit source register
rd 16 bit destination register
rbs 8 bit source register
rbd 8 bit destination register
rrs 32 bit source register
rrd 32 bit destination register
rqs 64 bit source register
rqd 64 bit destination register
addr 16/24 bit address
imm immediate data
adc rd,rs clrb addr cpsir @rd,@rs,rr,cc
adcb rbd,rbs clrb addr(rd) cpsirb @rd,@rs,rr,cc
add rd,@rs clrb rbd dab rbd
add rd,addr com @rd dbjnz rbd,disp7
add rd,addr(rs) com addr dec @rd,imm4m1
add rd,imm16 com addr(rd) dec addr(rd),imm4m1
add rd,rs com rd dec addr,imm4m1
addb rbd,@rs comb @rd dec rd,imm4m1
addb rbd,addr comb addr decb @rd,imm4m1
addb rbd,addr(rs) comb addr(rd) decb addr(rd),imm4m1
addb rbd,imm8 comb rbd decb addr,imm4m1
addb rbd,rbs comflg flags decb rbd,imm4m1
addl rrd,@rs cp @rd,imm16 di i2
addl rrd,addr cp addr(rd),imm16 div rrd,@rs
addl rrd,addr(rs) cp addr,imm16 div rrd,addr
addl rrd,imm32 cp rd,@rs div rrd,addr(rs)
addl rrd,rrs cp rd,addr div rrd,imm16
and rd,@rs cp rd,addr(rs) div rrd,rs
and rd,addr cp rd,imm16 divl rqd,@rs
and rd,addr(rs) cp rd,rs divl rqd,addr
and rd,imm16 cpb @rd,imm8 divl rqd,addr(rs)
and rd,rs cpb addr(rd),imm8 divl rqd,imm32
andb rbd,@rs cpb addr,imm8 divl rqd,rrs
andb rbd,addr cpb rbd,@rs djnz rd,disp7
andb rbd,addr(rs) cpb rbd,addr ei i2
andb rbd,imm8 cpb rbd,addr(rs) ex rd,@rs
andb rbd,rbs cpb rbd,imm8 ex rd,addr
bit @rd,imm4 cpb rbd,rbs ex rd,addr(rs)
bit addr(rd),imm4 cpd rd,@rs,rr,cc ex rd,rs
bit addr,imm4 cpdb rbd,@rs,rr,cc exb rbd,@rs
bit rd,imm4 cpdr rd,@rs,rr,cc exb rbd,addr
bit rd,rs cpdrb rbd,@rs,rr,cc exb rbd,addr(rs)
bitb @rd,imm4 cpi rd,@rs,rr,cc exb rbd,rbs
bitb addr(rd),imm4 cpib rbd,@rs,rr,cc ext0e imm8
bitb addr,imm4 cpir rd,@rs,rr,cc ext0f imm8
bitb rbd,imm4 cpirb rbd,@rs,rr,cc ext8e imm8
bitb rbd,rs cpl rrd,@rs ext8f imm8
bpt cpl rrd,addr exts rrd
call @rd cpl rrd,addr(rs) extsb rd
call addr cpl rrd,imm32 extsl rqd
call addr(rd) cpl rrd,rrs halt
calr disp12 cpsd @rd,@rs,rr,cc in rd,@rs
clr @rd cpsdb @rd,@rs,rr,cc in rd,imm16
clr addr cpsdr @rd,@rs,rr,cc inb rbd,@rs
clr addr(rd) cpsdrb @rd,@rs,rr,cc inb rbd,imm16
clr rd cpsi @rd,@rs,rr,cc inc @rd,imm4m1
clrb @rd cpsib @rd,@rs,rr,cc inc addr(rd),imm4m1
inc addr,imm4m1 ldb rbd,rs(rx) mult rrd,addr(rs)
inc rd,imm4m1 ldb rd(imm16),rbs mult rrd,imm16
incb @rd,imm4m1 ldb rd(rx),rbs mult rrd,rs
incb addr(rd),imm4m1 ldctl ctrl,rs multl rqd,@rs
incb addr,imm4m1 ldctl rd,ctrl multl rqd,addr
incb rbd,imm4m1 ldd @rs,@rd,rr multl rqd,addr(rs)
ind @rd,@rs,ra lddb @rs,@rd,rr multl rqd,imm32
indb @rd,@rs,rba lddr @rs,@rd,rr multl rqd,rrs
inib @rd,@rs,ra lddrb @rs,@rd,rr neg @rd
inibr @rd,@rs,ra ldi @rd,@rs,rr neg addr
iret ldib @rd,@rs,rr neg addr(rd)
jp cc,@rd ldir @rd,@rs,rr neg rd
jp cc,addr ldirb @rd,@rs,rr negb @rd
jp cc,addr(rd) ldk rd,imm4 negb addr
jr cc,disp8 ldl @rd,rrs negb addr(rd)
ld @rd,imm16 ldl addr(rd),rrs negb rbd
ld @rd,rs ldl addr,rrs nop
ld addr(rd),imm16 ldl rd(imm16),rrs or rd,@rs
ld addr(rd),rs ldl rd(rx),rrs or rd,addr
ld addr,imm16 ldl rrd,@rs or rd,addr(rs)
ld addr,rs ldl rrd,addr or rd,imm16
ld rd(imm16),rs ldl rrd,addr(rs) or rd,rs
ld rd(rx),rs ldl rrd,imm32 orb rbd,@rs
ld rd,@rs ldl rrd,rrs orb rbd,addr
ld rd,addr ldl rrd,rs(imm16) orb rbd,addr(rs)
ld rd,addr(rs) ldl rrd,rs(rx) orb rbd,imm8
ld rd,imm16 ldm @rd,rs,n orb rbd,rbs
ld rd,rs ldm addr(rd),rs,n out @rd,rs
ld rd,rs(imm16) ldm addr,rs,n out imm16,rs
ld rd,rs(rx) ldm rd,@rs,n outb @rd,rbs
lda rd,addr ldm rd,addr(rs),n outb imm16,rbs
lda rd,addr(rs) ldm rd,addr,n outd @rd,@rs,ra
lda rd,rs(imm16) ldps @rs outdb @rd,@rs,rba
lda rd,rs(rx) ldps addr outib @rd,@rs,ra
ldar rd,disp16 ldps addr(rs) outibr @rd,@rs,ra
ldb @rd,imm8 ldr disp16,rs pop @rd,@rs
ldb @rd,rbs ldr rd,disp16 pop addr(rd),@rs
ldb addr(rd),imm8 ldrb disp16,rbs pop addr,@rs
ldb addr(rd),rbs ldrb rbd,disp16 pop rd,@rs
ldb addr,imm8 ldrl disp16,rrs popl @rd,@rs
ldb addr,rbs ldrl rrd,disp16 popl addr(rd),@rs
ldb rbd,@rs mbit popl addr,@rs
ldb rbd,addr mreq rd popl rrd,@rs
ldb rbd,addr(rs) mres push @rd,@rs
ldb rbd,imm8 mset push @rd,addr
ldb rbd,rbs mult rrd,@rs push @rd,addr(rs)
ldb rbd,rs(imm16) mult rrd,addr push @rd,imm16
push @rd,rs set addr,imm4 subl rrd,imm32
pushl @rd,@rs set rd,imm4 subl rrd,rrs
pushl @rd,addr set rd,rs tcc cc,rd
pushl @rd,addr(rs) setb @rd,imm4 tccb cc,rbd
pushl @rd,rrs setb addr(rd),imm4 test @rd
res @rd,imm4 setb addr,imm4 test addr
res addr(rd),imm4 setb rbd,imm4 test addr(rd)
res addr,imm4 setb rbd,rs test rd
res rd,imm4 setflg imm4 testb @rd
res rd,rs sinb rbd,imm16 testb addr
resb @rd,imm4 sinb rd,imm16 testb addr(rd)
resb addr(rd),imm4 sind @rd,@rs,ra testb rbd
resb addr,imm4 sindb @rd,@rs,rba testl @rd
resb rbd,imm4 sinib @rd,@rs,ra testl addr
resb rbd,rs sinibr @rd,@rs,ra testl addr(rd)
resflg imm4 sla rd,imm8 testl rrd
ret cc slab rbd,imm8 trdb @rd,@rs,rba
rl rd,imm1or2 slal rrd,imm8 trdrb @rd,@rs,rba
rlb rbd,imm1or2 sll rd,imm8 trib @rd,@rs,rbr
rlc rd,imm1or2 sllb rbd,imm8 trirb @rd,@rs,rbr
rlcb rbd,imm1or2 slll rrd,imm8 trtdrb @ra,@rb,rbr
rldb rbb,rba sout imm16,rs trtib @ra,@rb,rr
rr rd,imm1or2 soutb imm16,rbs trtirb @ra,@rb,rbr
rrb rbd,imm1or2 soutd @rd,@rs,ra trtrb @ra,@rb,rbr
rrc rd,imm1or2 soutdb @rd,@rs,rba tset @rd
rrcb rbd,imm1or2 soutib @rd,@rs,ra tset addr
rrdb rbb,rba soutibr @rd,@rs,ra tset addr(rd)
rsvd36 sra rd,imm8 tset rd
rsvd38 srab rbd,imm8 tsetb @rd
rsvd78 sral rrd,imm8 tsetb addr
rsvd7e srl rd,imm8 tsetb addr(rd)
rsvd9d srlb rbd,imm8 tsetb rbd
rsvd9f srll rrd,imm8 xor rd,@rs
rsvdb9 sub rd,@rs xor rd,addr
rsvdbf sub rd,addr xor rd,addr(rs)
sbc rd,rs sub rd,addr(rs) xor rd,imm16
sbcb rbd,rbs sub rd,imm16 xor rd,rs
sc imm8 sub rd,rs xorb rbd,@rs
sda rd,rs subb rbd,@rs xorb rbd,addr
sdab rbd,rs subb rbd,addr xorb rbd,addr(rs)
sdal rrd,rs subb rbd,addr(rs) xorb rbd,imm8
sdl rd,rs subb rbd,imm8 xorb rbd,rbs
sdlb rbd,rs subb rbd,rbs xorb rbd,rbs
sdll rrd,rs subl rrd,@rs
set @rd,imm4 subl rrd,addr
set addr(rd),imm4 subl rrd,addr(rs)
File: as.info, Node: Vax-Dependent, Prev: Z8000-Dependent, Up: Machine Dependencies
8.32 VAX Dependent Features
===========================
* Menu:
* VAX-Opts:: VAX Command-Line Options
* VAX-float:: VAX Floating Point
* VAX-directives:: Vax Machine Directives
* VAX-opcodes:: VAX Opcodes
* VAX-branch:: VAX Branch Improvement
* VAX-operands:: VAX Operands
* VAX-no:: Not Supported on VAX
File: as.info, Node: VAX-Opts, Next: VAX-float, Up: Vax-Dependent
8.32.1 VAX Command-Line Options
-------------------------------
The Vax version of `as' accepts any of the following options, gives a
warning message that the option was ignored and proceeds. These
options are for compatibility with scripts designed for other people's
assemblers.
``-D' (Debug)'
``-S' (Symbol Table)'
``-T' (Token Trace)'
These are obsolete options used to debug old assemblers.
``-d' (Displacement size for JUMPs)'
This option expects a number following the `-d'. Like options
that expect filenames, the number may immediately follow the `-d'
(old standard) or constitute the whole of the command line
argument that follows `-d' (GNU standard).
``-V' (Virtualize Interpass Temporary File)'
Some other assemblers use a temporary file. This option commanded
them to keep the information in active memory rather than in a
disk file. `as' always does this, so this option is redundant.
``-J' (JUMPify Longer Branches)'
Many 32-bit computers permit a variety of branch instructions to
do the same job. Some of these instructions are short (and fast)
but have a limited range; others are long (and slow) but can
branch anywhere in virtual memory. Often there are 3 flavors of
branch: short, medium and long. Some other assemblers would emit
short and medium branches, unless told by this option to emit
short and long branches.
``-t' (Temporary File Directory)'
Some other assemblers may use a temporary file, and this option
takes a filename being the directory to site the temporary file.
Since `as' does not use a temporary disk file, this option makes
no difference. `-t' needs exactly one filename.
The Vax version of the assembler accepts additional options when
compiled for VMS:
`-h N'
External symbol or section (used for global variables) names are
not case sensitive on VAX/VMS and always mapped to upper case.
This is contrary to the C language definition which explicitly
distinguishes upper and lower case. To implement a standard
conforming C compiler, names must be changed (mapped) to preserve
the case information. The default mapping is to convert all lower
case characters to uppercase and adding an underscore followed by
a 6 digit hex value, representing a 24 digit binary value. The
one digits in the binary value represent which characters are
uppercase in the original symbol name.
The `-h N' option determines how we map names. This takes several
values. No `-h' switch at all allows case hacking as described
above. A value of zero (`-h0') implies names should be upper
case, and inhibits the case hack. A value of 2 (`-h2') implies
names should be all lower case, with no case hack. A value of 3
(`-h3') implies that case should be preserved. The value 1 is
unused. The `-H' option directs `as' to display every mapped
symbol during assembly.
Symbols whose names include a dollar sign `$' are exceptions to the
general name mapping. These symbols are normally only used to
reference VMS library names. Such symbols are always mapped to
upper case.
`-+'
The `-+' option causes `as' to truncate any symbol name larger
than 31 characters. The `-+' option also prevents some code
following the `_main' symbol normally added to make the object
file compatible with Vax-11 "C".
`-1'
This option is ignored for backward compatibility with `as'
version 1.x.
`-H'
The `-H' option causes `as' to print every symbol which was
changed by case mapping.
File: as.info, Node: VAX-float, Next: VAX-directives, Prev: VAX-Opts, Up: Vax-Dependent
8.32.2 VAX Floating Point
-------------------------
Conversion of flonums to floating point is correct, and compatible with
previous assemblers. Rounding is towards zero if the remainder is
exactly half the least significant bit.
`D', `F', `G' and `H' floating point formats are understood.
Immediate floating literals (_e.g._ `S`$6.9') are rendered
correctly. Again, rounding is towards zero in the boundary case.
The `.float' directive produces `f' format numbers. The `.double'
directive produces `d' format numbers.
File: as.info, Node: VAX-directives, Next: VAX-opcodes, Prev: VAX-float, Up: Vax-Dependent
8.32.3 Vax Machine Directives
-----------------------------
The Vax version of the assembler supports four directives for
generating Vax floating point constants. They are described in the
table below.
`.dfloat'
This expects zero or more flonums, separated by commas, and
assembles Vax `d' format 64-bit floating point constants.
`.ffloat'
This expects zero or more flonums, separated by commas, and
assembles Vax `f' format 32-bit floating point constants.
`.gfloat'
This expects zero or more flonums, separated by commas, and
assembles Vax `g' format 64-bit floating point constants.
`.hfloat'
This expects zero or more flonums, separated by commas, and
assembles Vax `h' format 128-bit floating point constants.
File: as.info, Node: VAX-opcodes, Next: VAX-branch, Prev: VAX-directives, Up: Vax-Dependent
8.32.4 VAX Opcodes
------------------
All DEC mnemonics are supported. Beware that `case...' instructions
have exactly 3 operands. The dispatch table that follows the `case...'
instruction should be made with `.word' statements. This is compatible
with all unix assemblers we know of.
File: as.info, Node: VAX-branch, Next: VAX-operands, Prev: VAX-opcodes, Up: Vax-Dependent
8.32.5 VAX Branch Improvement
-----------------------------
Certain pseudo opcodes are permitted. They are for branch
instructions. They expand to the shortest branch instruction that
reaches the target. Generally these mnemonics are made by substituting
`j' for `b' at the start of a DEC mnemonic. This feature is included
both for compatibility and to help compilers. If you do not need this
feature, avoid these opcodes. Here are the mnemonics, and the code
they can expand into.
`jbsb'
`Jsb' is already an instruction mnemonic, so we chose `jbsb'.
(byte displacement)
`bsbb ...'
(word displacement)
`bsbw ...'
(long displacement)
`jsb ...'
`jbr'
`jr'
Unconditional branch.
(byte displacement)
`brb ...'
(word displacement)
`brw ...'
(long displacement)
`jmp ...'
`jCOND'
COND may be any one of the conditional branches `neq', `nequ',
`eql', `eqlu', `gtr', `geq', `lss', `gtru', `lequ', `vc', `vs',
`gequ', `cc', `lssu', `cs'. COND may also be one of the bit tests
`bs', `bc', `bss', `bcs', `bsc', `bcc', `bssi', `bcci', `lbs',
`lbc'. NOTCOND is the opposite condition to COND.
(byte displacement)
`bCOND ...'
(word displacement)
`bNOTCOND foo ; brw ... ; foo:'
(long displacement)
`bNOTCOND foo ; jmp ... ; foo:'
`jacbX'
X may be one of `b d f g h l w'.
(word displacement)
`OPCODE ...'
(long displacement)
OPCODE ..., foo ;
brb bar ;
foo: jmp ... ;
bar:
`jaobYYY'
YYY may be one of `lss leq'.
`jsobZZZ'
ZZZ may be one of `geq gtr'.
(byte displacement)
`OPCODE ...'
(word displacement)
OPCODE ..., foo ;
brb bar ;
foo: brw DESTINATION ;
bar:
(long displacement)
OPCODE ..., foo ;
brb bar ;
foo: jmp DESTINATION ;
bar:
`aobleq'
`aoblss'
`sobgeq'
`sobgtr'
(byte displacement)
`OPCODE ...'
(word displacement)
OPCODE ..., foo ;
brb bar ;
foo: brw DESTINATION ;
bar:
(long displacement)
OPCODE ..., foo ;
brb bar ;
foo: jmp DESTINATION ;
bar:
File: as.info, Node: VAX-operands, Next: VAX-no, Prev: VAX-branch, Up: Vax-Dependent
8.32.6 VAX Operands
-------------------
The immediate character is `$' for Unix compatibility, not `#' as DEC
writes it.
The indirect character is `*' for Unix compatibility, not `@' as DEC
writes it.
The displacement sizing character is ``' (an accent grave) for Unix
compatibility, not `^' as DEC writes it. The letter preceding ``' may
have either case. `G' is not understood, but all other letters (`b i l
s w') are understood.
Register names understood are `r0 r1 r2 ... r15 ap fp sp pc'. Upper
and lower case letters are equivalent.
For instance
tstb *w`$4(r5)
Any expression is permitted in an operand. Operands are comma
separated.
File: as.info, Node: VAX-no, Prev: VAX-operands, Up: Vax-Dependent
8.32.7 Not Supported on VAX
---------------------------
Vax bit fields can not be assembled with `as'. Someone can add the
required code if they really need it.
File: as.info, Node: V850-Dependent, Next: Xtensa-Dependent, Prev: TIC54X-Dependent, Up: Machine Dependencies
8.33 v850 Dependent Features
============================
* Menu:
* V850 Options:: Options
* V850 Syntax:: Syntax
* V850 Floating Point:: Floating Point
* V850 Directives:: V850 Machine Directives
* V850 Opcodes:: Opcodes
File: as.info, Node: V850 Options, Next: V850 Syntax, Up: V850-Dependent
8.33.1 Options
--------------
`as' supports the following additional command-line options for the
V850 processor family:
`-wsigned_overflow'
Causes warnings to be produced when signed immediate values
overflow the space available for then within their opcodes. By
default this option is disabled as it is possible to receive
spurious warnings due to using exact bit patterns as immediate
constants.
`-wunsigned_overflow'
Causes warnings to be produced when unsigned immediate values
overflow the space available for then within their opcodes. By
default this option is disabled as it is possible to receive
spurious warnings due to using exact bit patterns as immediate
constants.
`-mv850'
Specifies that the assembled code should be marked as being
targeted at the V850 processor. This allows the linker to detect
attempts to link such code with code assembled for other
processors.
`-mv850e'
Specifies that the assembled code should be marked as being
targeted at the V850E processor. This allows the linker to detect
attempts to link such code with code assembled for other
processors.
`-mv850e1'
Specifies that the assembled code should be marked as being
targeted at the V850E1 processor. This allows the linker to
detect attempts to link such code with code assembled for other
processors.
`-mv850any'
Specifies that the assembled code should be marked as being
targeted at the V850 processor but support instructions that are
specific to the extended variants of the process. This allows the
production of binaries that contain target specific code, but
which are also intended to be used in a generic fashion. For
example libgcc.a contains generic routines used by the code
produced by GCC for all versions of the v850 architecture,
together with support routines only used by the V850E architecture.
`-mrelax'
Enables relaxation. This allows the .longcall and .longjump pseudo
ops to be used in the assembler source code. These ops label
sections of code which are either a long function call or a long
branch. The assembler will then flag these sections of code and
the linker will attempt to relax them.
File: as.info, Node: V850 Syntax, Next: V850 Floating Point, Prev: V850 Options, Up: V850-Dependent
8.33.2 Syntax
-------------
* Menu:
* V850-Chars:: Special Characters
* V850-Regs:: Register Names
File: as.info, Node: V850-Chars, Next: V850-Regs, Up: V850 Syntax
8.33.2.1 Special Characters
...........................
`#' is the line comment character.
File: as.info, Node: V850-Regs, Prev: V850-Chars, Up: V850 Syntax
8.33.2.2 Register Names
.......................
`as' supports the following names for registers:
`general register 0'
r0, zero
`general register 1'
r1
`general register 2'
r2, hp
`general register 3'
r3, sp
`general register 4'
r4, gp
`general register 5'
r5, tp
`general register 6'
r6
`general register 7'
r7
`general register 8'
r8
`general register 9'
r9
`general register 10'
r10
`general register 11'
r11
`general register 12'
r12
`general register 13'
r13
`general register 14'
r14
`general register 15'
r15
`general register 16'
r16
`general register 17'
r17
`general register 18'
r18
`general register 19'
r19
`general register 20'
r20
`general register 21'
r21
`general register 22'
r22
`general register 23'
r23
`general register 24'
r24
`general register 25'
r25
`general register 26'
r26
`general register 27'
r27
`general register 28'
r28
`general register 29'
r29
`general register 30'
r30, ep
`general register 31'
r31, lp
`system register 0'
eipc
`system register 1'
eipsw
`system register 2'
fepc
`system register 3'
fepsw
`system register 4'
ecr
`system register 5'
psw
`system register 16'
ctpc
`system register 17'
ctpsw
`system register 18'
dbpc
`system register 19'
dbpsw
`system register 20'
ctbp
File: as.info, Node: V850 Floating Point, Next: V850 Directives, Prev: V850 Syntax, Up: V850-Dependent
8.33.3 Floating Point
---------------------
The V850 family uses IEEE floating-point numbers.
File: as.info, Node: V850 Directives, Next: V850 Opcodes, Prev: V850 Floating Point, Up: V850-Dependent
8.33.4 V850 Machine Directives
------------------------------
`.offset <EXPRESSION>'
Moves the offset into the current section to the specified amount.
`.section "name", <type>'
This is an extension to the standard .section directive. It sets
the current section to be <type> and creates an alias for this
section called "name".
`.v850'
Specifies that the assembled code should be marked as being
targeted at the V850 processor. This allows the linker to detect
attempts to link such code with code assembled for other
processors.
`.v850e'
Specifies that the assembled code should be marked as being
targeted at the V850E processor. This allows the linker to detect
attempts to link such code with code assembled for other
processors.
`.v850e1'
Specifies that the assembled code should be marked as being
targeted at the V850E1 processor. This allows the linker to
detect attempts to link such code with code assembled for other
processors.
File: as.info, Node: V850 Opcodes, Prev: V850 Directives, Up: V850-Dependent
8.33.5 Opcodes
--------------
`as' implements all the standard V850 opcodes.
`as' also implements the following pseudo ops:
`hi0()'
Computes the higher 16 bits of the given expression and stores it
into the immediate operand field of the given instruction. For
example:
`mulhi hi0(here - there), r5, r6'
computes the difference between the address of labels 'here' and
'there', takes the upper 16 bits of this difference, shifts it
down 16 bits and then mutliplies it by the lower 16 bits in
register 5, putting the result into register 6.
`lo()'
Computes the lower 16 bits of the given expression and stores it
into the immediate operand field of the given instruction. For
example:
`addi lo(here - there), r5, r6'
computes the difference between the address of labels 'here' and
'there', takes the lower 16 bits of this difference and adds it to
register 5, putting the result into register 6.
`hi()'
Computes the higher 16 bits of the given expression and then adds
the value of the most significant bit of the lower 16 bits of the
expression and stores the result into the immediate operand field
of the given instruction. For example the following code can be
used to compute the address of the label 'here' and store it into
register 6:
`movhi hi(here), r0, r6' `movea lo(here), r6, r6'
The reason for this special behaviour is that movea performs a sign
extension on its immediate operand. So for example if the address
of 'here' was 0xFFFFFFFF then without the special behaviour of the
hi() pseudo-op the movhi instruction would put 0xFFFF0000 into r6,
then the movea instruction would takes its immediate operand,
0xFFFF, sign extend it to 32 bits, 0xFFFFFFFF, and then add it
into r6 giving 0xFFFEFFFF which is wrong (the fifth nibble is E).
With the hi() pseudo op adding in the top bit of the lo() pseudo
op, the movhi instruction actually stores 0 into r6 (0xFFFF + 1 =
0x0000), so that the movea instruction stores 0xFFFFFFFF into r6 -
the right value.
`hilo()'
Computes the 32 bit value of the given expression and stores it
into the immediate operand field of the given instruction (which
must be a mov instruction). For example:
`mov hilo(here), r6'
computes the absolute address of label 'here' and puts the result
into register 6.
`sdaoff()'
Computes the offset of the named variable from the start of the
Small Data Area (whoes address is held in register 4, the GP
register) and stores the result as a 16 bit signed value in the
immediate operand field of the given instruction. For example:
`ld.w sdaoff(_a_variable)[gp],r6'
loads the contents of the location pointed to by the label
'_a_variable' into register 6, provided that the label is located
somewhere within +/- 32K of the address held in the GP register.
[Note the linker assumes that the GP register contains a fixed
address set to the address of the label called '__gp'. This can
either be set up automatically by the linker, or specifically set
by using the `--defsym __gp=<value>' command line option].
`tdaoff()'
Computes the offset of the named variable from the start of the
Tiny Data Area (whoes address is held in register 30, the EP
register) and stores the result as a 4,5, 7 or 8 bit unsigned
value in the immediate operand field of the given instruction.
For example:
`sld.w tdaoff(_a_variable)[ep],r6'
loads the contents of the location pointed to by the label
'_a_variable' into register 6, provided that the label is located
somewhere within +256 bytes of the address held in the EP
register. [Note the linker assumes that the EP register contains
a fixed address set to the address of the label called '__ep'.
This can either be set up automatically by the linker, or
specifically set by using the `--defsym __ep=<value>' command line
option].
`zdaoff()'
Computes the offset of the named variable from address 0 and
stores the result as a 16 bit signed value in the immediate
operand field of the given instruction. For example:
`movea zdaoff(_a_variable),zero,r6'
puts the address of the label '_a_variable' into register 6,
assuming that the label is somewhere within the first 32K of
memory. (Strictly speaking it also possible to access the last
32K of memory as well, as the offsets are signed).
`ctoff()'
Computes the offset of the named variable from the start of the
Call Table Area (whoes address is helg in system register 20, the
CTBP register) and stores the result a 6 or 16 bit unsigned value
in the immediate field of then given instruction or piece of data.
For example:
`callt ctoff(table_func1)'
will put the call the function whoes address is held in the call
table at the location labeled 'table_func1'.
`.longcall `name''
Indicates that the following sequence of instructions is a long
call to function `name'. The linker will attempt to shorten this
call sequence if `name' is within a 22bit offset of the call. Only
valid if the `-mrelax' command line switch has been enabled.
`.longjump `name''
Indicates that the following sequence of instructions is a long
jump to label `name'. The linker will attempt to shorten this code
sequence if `name' is within a 22bit offset of the jump. Only
valid if the `-mrelax' command line switch has been enabled.
For information on the V850 instruction set, see `V850 Family
32-/16-Bit single-Chip Microcontroller Architecture Manual' from NEC.
Ltd.
File: as.info, Node: Xtensa-Dependent, Next: Z80-Dependent, Prev: V850-Dependent, Up: Machine Dependencies
8.34 Xtensa Dependent Features
==============================
This chapter covers features of the GNU assembler that are specific
to the Xtensa architecture. For details about the Xtensa instruction
set, please consult the `Xtensa Instruction Set Architecture (ISA)
Reference Manual'.
* Menu:
* Xtensa Options:: Command-line Options.
* Xtensa Syntax:: Assembler Syntax for Xtensa Processors.
* Xtensa Optimizations:: Assembler Optimizations.
* Xtensa Relaxation:: Other Automatic Transformations.
* Xtensa Directives:: Directives for Xtensa Processors.
File: as.info, Node: Xtensa Options, Next: Xtensa Syntax, Up: Xtensa-Dependent
8.34.1 Command Line Options
---------------------------
The Xtensa version of the GNU assembler supports these special options:
`--text-section-literals | --no-text-section-literals'
Control the treatment of literal pools. The default is
`--no-text-section-literals', which places literals in a separate
section in the output file. This allows the literal pool to be
placed in a data RAM/ROM. With `--text-section-literals', the
literals are interspersed in the text section in order to keep
them as close as possible to their references. This may be
necessary for large assembly files, where the literals would
otherwise be out of range of the `L32R' instructions in the text
section. These options only affect literals referenced via
PC-relative `L32R' instructions; literals for absolute mode `L32R'
instructions are handled separately.
`--absolute-literals | --no-absolute-literals'
Indicate to the assembler whether `L32R' instructions use absolute
or PC-relative addressing. If the processor includes the absolute
addressing option, the default is to use absolute `L32R'
relocations. Otherwise, only the PC-relative `L32R' relocations
can be used.
`--target-align | --no-target-align'
Enable or disable automatic alignment to reduce branch penalties
at some expense in code size. *Note Automatic Instruction
Alignment: Xtensa Automatic Alignment. This optimization is
enabled by default. Note that the assembler will always align
instructions like `LOOP' that have fixed alignment requirements.
`--longcalls | --no-longcalls'
Enable or disable transformation of call instructions to allow
calls across a greater range of addresses. *Note Function Call
Relaxation: Xtensa Call Relaxation. This option should be used
when call targets can potentially be out of range. It may degrade
both code size and performance, but the linker can generally
optimize away the unnecessary overhead when a call ends up within
range. The default is `--no-longcalls'.
`--transform | --no-transform'
Enable or disable all assembler transformations of Xtensa
instructions, including both relaxation and optimization. The
default is `--transform'; `--no-transform' should only be used in
the rare cases when the instructions must be exactly as specified
in the assembly source. Using `--no-transform' causes out of range
instruction operands to be errors.
`--rename-section OLDNAME=NEWNAME'
Rename the OLDNAME section to NEWNAME. This option can be used
multiple times to rename multiple sections.
File: as.info, Node: Xtensa Syntax, Next: Xtensa Optimizations, Prev: Xtensa Options, Up: Xtensa-Dependent
8.34.2 Assembler Syntax
-----------------------
Block comments are delimited by `/*' and `*/'. End of line comments
may be introduced with either `#' or `//'.
Instructions consist of a leading opcode or macro name followed by
whitespace and an optional comma-separated list of operands:
OPCODE [OPERAND, ...]
Instructions must be separated by a newline or semicolon.
FLIX instructions, which bundle multiple opcodes together in a single
instruction, are specified by enclosing the bundled opcodes inside
braces:
{
[FORMAT]
OPCODE0 [OPERANDS]
OPCODE1 [OPERANDS]
OPCODE2 [OPERANDS]
...
}
The opcodes in a FLIX instruction are listed in the same order as the
corresponding instruction slots in the TIE format declaration.
Directives and labels are not allowed inside the braces of a FLIX
instruction. A particular TIE format name can optionally be specified
immediately after the opening brace, but this is usually unnecessary.
The assembler will automatically search for a format that can encode the
specified opcodes, so the format name need only be specified in rare
cases where there is more than one applicable format and where it
matters which of those formats is used. A FLIX instruction can also be
specified on a single line by separating the opcodes with semicolons:
{ [FORMAT;] OPCODE0 [OPERANDS]; OPCODE1 [OPERANDS]; OPCODE2 [OPERANDS]; ... }
The assembler can automatically bundle opcodes into FLIX
instructions. It encodes the opcodes in order, one at a time, choosing
the smallest format where each opcode can be encoded and filling unused
instruction slots with no-ops.
* Menu:
* Xtensa Opcodes:: Opcode Naming Conventions.
* Xtensa Registers:: Register Naming.
File: as.info, Node: Xtensa Opcodes, Next: Xtensa Registers, Up: Xtensa Syntax
8.34.2.1 Opcode Names
.....................
See the `Xtensa Instruction Set Architecture (ISA) Reference Manual'
for a complete list of opcodes and descriptions of their semantics.
If an opcode name is prefixed with an underscore character (`_'),
`as' will not transform that instruction in any way. The underscore
prefix disables both optimization (*note Xtensa Optimizations: Xtensa
Optimizations.) and relaxation (*note Xtensa Relaxation: Xtensa
Relaxation.) for that particular instruction. Only use the underscore
prefix when it is essential to select the exact opcode produced by the
assembler. Using this feature unnecessarily makes the code less
efficient by disabling assembler optimization and less flexible by
disabling relaxation.
Note that this special handling of underscore prefixes only applies
to Xtensa opcodes, not to either built-in macros or user-defined macros.
When an underscore prefix is used with a macro (e.g., `_MOV'), it
refers to a different macro. The assembler generally provides built-in
macros both with and without the underscore prefix, where the underscore
versions behave as if the underscore carries through to the instructions
in the macros. For example, `_MOV' may expand to `_MOV.N'.
The underscore prefix only applies to individual instructions, not to
series of instructions. For example, if a series of instructions have
underscore prefixes, the assembler will not transform the individual
instructions, but it may insert other instructions between them (e.g.,
to align a `LOOP' instruction). To prevent the assembler from
modifying a series of instructions as a whole, use the `no-transform'
directive. *Note transform: Transform Directive.
File: as.info, Node: Xtensa Registers, Prev: Xtensa Opcodes, Up: Xtensa Syntax
8.34.2.2 Register Names
.......................
The assembly syntax for a register file entry is the "short" name for a
TIE register file followed by the index into that register file. For
example, the general-purpose `AR' register file has a short name of
`a', so these registers are named `a0'...`a15'. As a special feature,
`sp' is also supported as a synonym for `a1'. Additional registers may
be added by processor configuration options and by designer-defined TIE
extensions. An initial `$' character is optional in all register names.
File: as.info, Node: Xtensa Optimizations, Next: Xtensa Relaxation, Prev: Xtensa Syntax, Up: Xtensa-Dependent
8.34.3 Xtensa Optimizations
---------------------------
The optimizations currently supported by `as' are generation of density
instructions where appropriate and automatic branch target alignment.
* Menu:
* Density Instructions:: Using Density Instructions.
* Xtensa Automatic Alignment:: Automatic Instruction Alignment.
File: as.info, Node: Density Instructions, Next: Xtensa Automatic Alignment, Up: Xtensa Optimizations
8.34.3.1 Using Density Instructions
...................................
The Xtensa instruction set has a code density option that provides
16-bit versions of some of the most commonly used opcodes. Use of these
opcodes can significantly reduce code size. When possible, the
assembler automatically translates instructions from the core Xtensa
instruction set into equivalent instructions from the Xtensa code
density option. This translation can be disabled by using underscore
prefixes (*note Opcode Names: Xtensa Opcodes.), by using the
`--no-transform' command-line option (*note Command Line Options:
Xtensa Options.), or by using the `no-transform' directive (*note
transform: Transform Directive.).
It is a good idea _not_ to use the density instructions directly.
The assembler will automatically select dense instructions where
possible. If you later need to use an Xtensa processor without the code
density option, the same assembly code will then work without
modification.
File: as.info, Node: Xtensa Automatic Alignment, Prev: Density Instructions, Up: Xtensa Optimizations
8.34.3.2 Automatic Instruction Alignment
........................................
The Xtensa assembler will automatically align certain instructions, both
to optimize performance and to satisfy architectural requirements.
As an optimization to improve performance, the assembler attempts to
align branch targets so they do not cross instruction fetch boundaries.
(Xtensa processors can be configured with either 32-bit or 64-bit
instruction fetch widths.) An instruction immediately following a call
is treated as a branch target in this context, because it will be the
target of a return from the call. This alignment has the potential to
reduce branch penalties at some expense in code size. The assembler
will not attempt to align labels with the prefixes `.Ln' and `.LM',
since these labels are used for debugging information and are not
typically branch targets. This optimization is enabled by default.
You can disable it with the `--no-target-align' command-line option
(*note Command Line Options: Xtensa Options.).
The target alignment optimization is done without adding instructions
that could increase the execution time of the program. If there are
density instructions in the code preceding a target, the assembler can
change the target alignment by widening some of those instructions to
the equivalent 24-bit instructions. Extra bytes of padding can be
inserted immediately following unconditional jump and return
instructions. This approach is usually successful in aligning many,
but not all, branch targets.
The `LOOP' family of instructions must be aligned such that the
first instruction in the loop body does not cross an instruction fetch
boundary (e.g., with a 32-bit fetch width, a `LOOP' instruction must be
on either a 1 or 2 mod 4 byte boundary). The assembler knows about
this restriction and inserts the minimal number of 2 or 3 byte no-op
instructions to satisfy it. When no-op instructions are added, any
label immediately preceding the original loop will be moved in order to
refer to the loop instruction, not the newly generated no-op
instruction. To preserve binary compatibility across processors with
different fetch widths, the assembler conservatively assumes a 32-bit
fetch width when aligning `LOOP' instructions (except if the first
instruction in the loop is a 64-bit instruction).
Similarly, the `ENTRY' instruction must be aligned on a 0 mod 4 byte
boundary. The assembler satisfies this requirement by inserting zero
bytes when required. In addition, labels immediately preceding the
`ENTRY' instruction will be moved to the newly aligned instruction
location.
File: as.info, Node: Xtensa Relaxation, Next: Xtensa Directives, Prev: Xtensa Optimizations, Up: Xtensa-Dependent
8.34.4 Xtensa Relaxation
------------------------
When an instruction operand is outside the range allowed for that
particular instruction field, `as' can transform the code to use a
functionally-equivalent instruction or sequence of instructions. This
process is known as "relaxation". This is typically done for branch
instructions because the distance of the branch targets is not known
until assembly-time. The Xtensa assembler offers branch relaxation and
also extends this concept to function calls, `MOVI' instructions and
other instructions with immediate fields.
* Menu:
* Xtensa Branch Relaxation:: Relaxation of Branches.
* Xtensa Call Relaxation:: Relaxation of Function Calls.
* Xtensa Immediate Relaxation:: Relaxation of other Immediate Fields.
File: as.info, Node: Xtensa Branch Relaxation, Next: Xtensa Call Relaxation, Up: Xtensa Relaxation
8.34.4.1 Conditional Branch Relaxation
......................................
When the target of a branch is too far away from the branch itself,
i.e., when the offset from the branch to the target is too large to fit
in the immediate field of the branch instruction, it may be necessary to
replace the branch with a branch around a jump. For example,
beqz a2, L
may result in:
bnez.n a2, M
j L
M:
(The `BNEZ.N' instruction would be used in this example only if the
density option is available. Otherwise, `BNEZ' would be used.)
This relaxation works well because the unconditional jump instruction
has a much larger offset range than the various conditional branches.
However, an error will occur if a branch target is beyond the range of a
jump instruction. `as' cannot relax unconditional jumps. Similarly,
an error will occur if the original input contains an unconditional
jump to a target that is out of range.
Branch relaxation is enabled by default. It can be disabled by using
underscore prefixes (*note Opcode Names: Xtensa Opcodes.), the
`--no-transform' command-line option (*note Command Line Options:
Xtensa Options.), or the `no-transform' directive (*note transform:
Transform Directive.).
File: as.info, Node: Xtensa Call Relaxation, Next: Xtensa Immediate Relaxation, Prev: Xtensa Branch Relaxation, Up: Xtensa Relaxation
8.34.4.2 Function Call Relaxation
.................................
Function calls may require relaxation because the Xtensa immediate call
instructions (`CALL0', `CALL4', `CALL8' and `CALL12') provide a
PC-relative offset of only 512 Kbytes in either direction. For larger
programs, it may be necessary to use indirect calls (`CALLX0',
`CALLX4', `CALLX8' and `CALLX12') where the target address is specified
in a register. The Xtensa assembler can automatically relax immediate
call instructions into indirect call instructions. This relaxation is
done by loading the address of the called function into the callee's
return address register and then using a `CALLX' instruction. So, for
example:
call8 func
might be relaxed to:
.literal .L1, func
l32r a8, .L1
callx8 a8
Because the addresses of targets of function calls are not generally
known until link-time, the assembler must assume the worst and relax all
the calls to functions in other source files, not just those that really
will be out of range. The linker can recognize calls that were
unnecessarily relaxed, and it will remove the overhead introduced by the
assembler for those cases where direct calls are sufficient.
Call relaxation is disabled by default because it can have a negative
effect on both code size and performance, although the linker can
usually eliminate the unnecessary overhead. If a program is too large
and some of the calls are out of range, function call relaxation can be
enabled using the `--longcalls' command-line option or the `longcalls'
directive (*note longcalls: Longcalls Directive.).
File: as.info, Node: Xtensa Immediate Relaxation, Prev: Xtensa Call Relaxation, Up: Xtensa Relaxation
8.34.4.3 Other Immediate Field Relaxation
.........................................
The assembler normally performs the following other relaxations. They
can be disabled by using underscore prefixes (*note Opcode Names:
Xtensa Opcodes.), the `--no-transform' command-line option (*note
Command Line Options: Xtensa Options.), or the `no-transform' directive
(*note transform: Transform Directive.).
The `MOVI' machine instruction can only materialize values in the
range from -2048 to 2047. Values outside this range are best
materialized with `L32R' instructions. Thus:
movi a0, 100000
is assembled into the following machine code:
.literal .L1, 100000
l32r a0, .L1
The `L8UI' machine instruction can only be used with immediate
offsets in the range from 0 to 255. The `L16SI' and `L16UI' machine
instructions can only be used with offsets from 0 to 510. The `L32I'
machine instruction can only be used with offsets from 0 to 1020. A
load offset outside these ranges can be materalized with an `L32R'
instruction if the destination register of the load is different than
the source address register. For example:
l32i a1, a0, 2040
is translated to:
.literal .L1, 2040
l32r a1, .L1
addi a1, a0, a1
l32i a1, a1, 0
If the load destination and source address register are the same, an
out-of-range offset causes an error.
The Xtensa `ADDI' instruction only allows immediate operands in the
range from -128 to 127. There are a number of alternate instruction
sequences for the `ADDI' operation. First, if the immediate is 0, the
`ADDI' will be turned into a `MOV.N' instruction (or the equivalent
`OR' instruction if the code density option is not available). If the
`ADDI' immediate is outside of the range -128 to 127, but inside the
range -32896 to 32639, an `ADDMI' instruction or `ADDMI'/`ADDI'
sequence will be used. Finally, if the immediate is outside of this
range and a free register is available, an `L32R'/`ADD' sequence will
be used with a literal allocated from the literal pool.
For example:
addi a5, a6, 0
addi a5, a6, 512
addi a5, a6, 513
addi a5, a6, 50000
is assembled into the following:
.literal .L1, 50000
mov.n a5, a6
addmi a5, a6, 0x200
addmi a5, a6, 0x200
addi a5, a5, 1
l32r a5, .L1
add a5, a6, a5
File: as.info, Node: Xtensa Directives, Prev: Xtensa Relaxation, Up: Xtensa-Dependent
8.34.5 Directives
-----------------
The Xtensa assember supports a region-based directive syntax:
.begin DIRECTIVE [OPTIONS]
...
.end DIRECTIVE
All the Xtensa-specific directives that apply to a region of code use
this syntax.
The directive applies to code between the `.begin' and the `.end'.
The state of the option after the `.end' reverts to what it was before
the `.begin'. A nested `.begin'/`.end' region can further change the
state of the directive without having to be aware of its outer state.
For example, consider:
.begin no-transform
L: add a0, a1, a2
.begin transform
M: add a0, a1, a2
.end transform
N: add a0, a1, a2
.end no-transform
The `ADD' opcodes at `L' and `N' in the outer `no-transform' region
both result in `ADD' machine instructions, but the assembler selects an
`ADD.N' instruction for the `ADD' at `M' in the inner `transform'
region.
The advantage of this style is that it works well inside macros
which can preserve the context of their callers.
The following directives are available:
* Menu:
* Schedule Directive:: Enable instruction scheduling.
* Longcalls Directive:: Use Indirect Calls for Greater Range.
* Transform Directive:: Disable All Assembler Transformations.
* Literal Directive:: Intermix Literals with Instructions.
* Literal Position Directive:: Specify Inline Literal Pool Locations.
* Literal Prefix Directive:: Specify Literal Section Name Prefix.
* Absolute Literals Directive:: Control PC-Relative vs. Absolute Literals.
File: as.info, Node: Schedule Directive, Next: Longcalls Directive, Up: Xtensa Directives
8.34.5.1 schedule
.................
The `schedule' directive is recognized only for compatibility with
Tensilica's assembler.
.begin [no-]schedule
.end [no-]schedule
This directive is ignored and has no effect on `as'.
File: as.info, Node: Longcalls Directive, Next: Transform Directive, Prev: Schedule Directive, Up: Xtensa Directives
8.34.5.2 longcalls
..................
The `longcalls' directive enables or disables function call relaxation.
*Note Function Call Relaxation: Xtensa Call Relaxation.
.begin [no-]longcalls
.end [no-]longcalls
Call relaxation is disabled by default unless the `--longcalls'
command-line option is specified. The `longcalls' directive overrides
the default determined by the command-line options.
File: as.info, Node: Transform Directive, Next: Literal Directive, Prev: Longcalls Directive, Up: Xtensa Directives
8.34.5.3 transform
..................
This directive enables or disables all assembler transformation,
including relaxation (*note Xtensa Relaxation: Xtensa Relaxation.) and
optimization (*note Xtensa Optimizations: Xtensa Optimizations.).
.begin [no-]transform
.end [no-]transform
Transformations are enabled by default unless the `--no-transform'
option is used. The `transform' directive overrides the default
determined by the command-line options. An underscore opcode prefix,
disabling transformation of that opcode, always takes precedence over
both directives and command-line flags.
File: as.info, Node: Literal Directive, Next: Literal Position Directive, Prev: Transform Directive, Up: Xtensa Directives
8.34.5.4 literal
................
The `.literal' directive is used to define literal pool data, i.e.,
read-only 32-bit data accessed via `L32R' instructions.
.literal LABEL, VALUE[, VALUE...]
This directive is similar to the standard `.word' directive, except
that the actual location of the literal data is determined by the
assembler and linker, not by the position of the `.literal' directive.
Using this directive gives the assembler freedom to locate the literal
data in the most appropriate place and possibly to combine identical
literals. For example, the code:
entry sp, 40
.literal .L1, sym
l32r a4, .L1
can be used to load a pointer to the symbol `sym' into register
`a4'. The value of `sym' will not be placed between the `ENTRY' and
`L32R' instructions; instead, the assembler puts the data in a literal
pool.
Literal pools for absolute mode `L32R' instructions (*note Absolute
Literals Directive::) are placed in a separate `.lit4' section. By
default literal pools for PC-relative mode `L32R' instructions are
placed in a separate `.literal' section; however, when using the
`--text-section-literals' option (*note Command Line Options: Xtensa
Options.), the literal pools are placed in the current section. These
text section literal pools are created automatically before `ENTRY'
instructions and manually after `.literal_position' directives (*note
literal_position: Literal Position Directive.). If there are no
preceding `ENTRY' instructions, explicit `.literal_position' directives
must be used to place the text section literal pools; otherwise, `as'
will report an error.
File: as.info, Node: Literal Position Directive, Next: Literal Prefix Directive, Prev: Literal Directive, Up: Xtensa Directives
8.34.5.5 literal_position
.........................
When using `--text-section-literals' to place literals inline in the
section being assembled, the `.literal_position' directive can be used
to mark a potential location for a literal pool.
.literal_position
The `.literal_position' directive is ignored when the
`--text-section-literals' option is not used or when `L32R'
instructions use the absolute addressing mode.
The assembler will automatically place text section literal pools
before `ENTRY' instructions, so the `.literal_position' directive is
only needed to specify some other location for a literal pool. You may
need to add an explicit jump instruction to skip over an inline literal
pool.
For example, an interrupt vector does not begin with an `ENTRY'
instruction so the assembler will be unable to automatically find a good
place to put a literal pool. Moreover, the code for the interrupt
vector must be at a specific starting address, so the literal pool
cannot come before the start of the code. The literal pool for the
vector must be explicitly positioned in the middle of the vector (before
any uses of the literals, due to the negative offsets used by
PC-relative `L32R' instructions). The `.literal_position' directive
can be used to do this. In the following code, the literal for `M'
will automatically be aligned correctly and is placed after the
unconditional jump.
.global M
code_start:
j continue
.literal_position
.align 4
continue:
movi a4, M
File: as.info, Node: Literal Prefix Directive, Next: Absolute Literals Directive, Prev: Literal Position Directive, Up: Xtensa Directives
8.34.5.6 literal_prefix
.......................
The `literal_prefix' directive allows you to specify different sections
to hold literals from different portions of an assembly file. With
this directive, a single assembly file can be used to generate code
into multiple sections, including literals generated by the assembler.
.begin literal_prefix [NAME]
.end literal_prefix
By default the assembler places literal pools in sections separate
from the instructions, using the default literal section names of
`.literal' for PC-relative mode `L32R' instructions and `.lit4' for
absolute mode `L32R' instructions (*note Absolute Literals
Directive::). The `literal_prefix' directive causes different literal
sections to be used for the code inside the delimited region. The new
literal sections are determined by including NAME as a prefix to the
default literal section names. If the NAME argument is omitted, the
literal sections revert to the defaults. This directive has no effect
when using the `--text-section-literals' option (*note Command Line
Options: Xtensa Options.).
Except for two special cases, the assembler determines the new
literal sections by simply prepending NAME to the default section names,
resulting in `NAME.literal' and `NAME.lit4' sections. The
`literal_prefix' directive is often used with the name of the current
text section as the prefix argument. To facilitate this usage, the
assembler uses special case rules when it recognizes NAME as a text
section name. First, if NAME ends with `.text', that suffix is not
included in the literal section name. For example, if NAME is
`.iram0.text', then the literal sections will be `.iram0.literal' and
`.iram0.lit4'. Second, if NAME begins with `.gnu.linkonce.t.', then
the literal section names are formed by replacing the `.t' substring
with `.literal' and `.lit4'. For example, if NAME is
`.gnu.linkonce.t.func', the literal sections will be
`.gnu.linkonce.literal.func' and `.gnu.linkonce.lit4.func'.
File: as.info, Node: Absolute Literals Directive, Prev: Literal Prefix Directive, Up: Xtensa Directives
8.34.5.7 absolute-literals
..........................
The `absolute-literals' and `no-absolute-literals' directives control
the absolute vs. PC-relative mode for `L32R' instructions. These are
relevant only for Xtensa configurations that include the absolute
addressing option for `L32R' instructions.
.begin [no-]absolute-literals
.end [no-]absolute-literals
These directives do not change the `L32R' mode--they only cause the
assembler to emit the appropriate kind of relocation for `L32R'
instructions and to place the literal values in the appropriate section.
To change the `L32R' mode, the program must write the `LITBASE' special
register. It is the programmer's responsibility to keep track of the
mode and indicate to the assembler which mode is used in each region of
code.
If the Xtensa configuration includes the absolute `L32R' addressing
option, the default is to assume absolute `L32R' addressing unless the
`--no-absolute-literals' command-line option is specified. Otherwise,
the default is to assume PC-relative `L32R' addressing. The
`absolute-literals' directive can then be used to override the default
determined by the command-line options.
File: as.info, Node: Reporting Bugs, Next: Acknowledgements, Prev: Machine Dependencies, Up: Top
9 Reporting Bugs
****************
Your bug reports play an essential role in making `as' reliable.
Reporting a bug may help you by bringing a solution to your problem,
or it may not. But in any case the principal function of a bug report
is to help the entire community by making the next version of `as' work
better. Bug reports are your contribution to the maintenance of `as'.
In order for a bug report to serve its purpose, you must include the
information that enables us to fix the bug.
* Menu:
* Bug Criteria:: Have you found a bug?
* Bug Reporting:: How to report bugs
File: as.info, Node: Bug Criteria, Next: Bug Reporting, Up: Reporting Bugs
9.1 Have You Found a Bug?
=========================
If you are not sure whether you have found a bug, here are some
guidelines:
* If the assembler gets a fatal signal, for any input whatever, that
is a `as' bug. Reliable assemblers never crash.
* If `as' produces an error message for valid input, that is a bug.
* If `as' does not produce an error message for invalid input, that
is a bug. However, you should note that your idea of "invalid
input" might be our idea of "an extension" or "support for
traditional practice".
* If you are an experienced user of assemblers, your suggestions for
improvement of `as' are welcome in any case.
File: as.info, Node: Bug Reporting, Prev: Bug Criteria, Up: Reporting Bugs
9.2 How to Report Bugs
======================
A number of companies and individuals offer support for GNU products.
If you obtained `as' from a support organization, we recommend you
contact that organization first.
You can find contact information for many support companies and
individuals in the file `etc/SERVICE' in the GNU Emacs distribution.
In any event, we also recommend that you send bug reports for `as'
to `bug-binutils@gnu.org'.
The fundamental principle of reporting bugs usefully is this:
*report all the facts*. If you are not sure whether to state a fact or
leave it out, state it!
Often people omit facts because they think they know what causes the
problem and assume that some details do not matter. Thus, you might
assume that the name of a symbol you use in an example does not matter.
Well, probably it does not, but one cannot be sure. Perhaps the bug
is a stray memory reference which happens to fetch from the location
where that name is stored in memory; perhaps, if the name were
different, the contents of that location would fool the assembler into
doing the right thing despite the bug. Play it safe and give a
specific, complete example. That is the easiest thing for you to do,
and the most helpful.
Keep in mind that the purpose of a bug report is to enable us to fix
the bug if it is new to us. Therefore, always write your bug reports
on the assumption that the bug has not been reported previously.
Sometimes people give a few sketchy facts and ask, "Does this ring a
bell?" This cannot help us fix a bug, so it is basically useless. We
respond by asking for enough details to enable us to investigate. You
might as well expedite matters by sending them to begin with.
To enable us to fix the bug, you should include all these things:
* The version of `as'. `as' announces it if you start it with the
`--version' argument.
Without this, we will not know whether there is any point in
looking for the bug in the current version of `as'.
* Any patches you may have applied to the `as' source.
* The type of machine you are using, and the operating system name
and version number.
* What compiler (and its version) was used to compile `as'--e.g.
"`gcc-2.7'".
* The command arguments you gave the assembler to assemble your
example and observe the bug. To guarantee you will not omit
something important, list them all. A copy of the Makefile (or
the output from make) is sufficient.
If we were to try to guess the arguments, we would probably guess
wrong and then we might not encounter the bug.
* A complete input file that will reproduce the bug. If the bug is
observed when the assembler is invoked via a compiler, send the
assembler source, not the high level language source. Most
compilers will produce the assembler source when run with the `-S'
option. If you are using `gcc', use the options `-v
--save-temps'; this will save the assembler source in a file with
an extension of `.s', and also show you exactly how `as' is being
run.
* A description of what behavior you observe that you believe is
incorrect. For example, "It gets a fatal signal."
Of course, if the bug is that `as' gets a fatal signal, then we
will certainly notice it. But if the bug is incorrect output, we
might not notice unless it is glaringly wrong. You might as well
not give us a chance to make a mistake.
Even if the problem you experience is a fatal signal, you should
still say so explicitly. Suppose something strange is going on,
such as, your copy of `as' is out of synch, or you have
encountered a bug in the C library on your system. (This has
happened!) Your copy might crash and ours would not. If you told
us to expect a crash, then when ours fails to crash, we would know
that the bug was not happening for us. If you had not told us to
expect a crash, then we would not be able to draw any conclusion
from our observations.
* If you wish to suggest changes to the `as' source, send us context
diffs, as generated by `diff' with the `-u', `-c', or `-p' option.
Always send diffs from the old file to the new file. If you even
discuss something in the `as' source, refer to it by context, not
by line number.
The line numbers in our development sources will not match those
in your sources. Your line numbers would convey no useful
information to us.
Here are some things that are not necessary:
* A description of the envelope of the bug.
Often people who encounter a bug spend a lot of time investigating
which changes to the input file will make the bug go away and which
changes will not affect it.
This is often time consuming and not very useful, because the way
we will find the bug is by running a single example under the
debugger with breakpoints, not by pure deduction from a series of
examples. We recommend that you save your time for something else.
Of course, if you can find a simpler example to report _instead_
of the original one, that is a convenience for us. Errors in the
output will be easier to spot, running under the debugger will take
less time, and so on.
However, simplification is not vital; if you do not want to do
this, report the bug anyway and send us the entire test case you
used.
* A patch for the bug.
A patch for the bug does help us if it is a good one. But do not
omit the necessary information, such as the test case, on the
assumption that a patch is all we need. We might see problems
with your patch and decide to fix the problem another way, or we
might not understand it at all.
Sometimes with a program as complicated as `as' it is very hard to
construct an example that will make the program follow a certain
path through the code. If you do not send us the example, we will
not be able to construct one, so we will not be able to verify
that the bug is fixed.
And if we cannot understand what bug you are trying to fix, or why
your patch should be an improvement, we will not install it. A
test case will help us to understand.
* A guess about what the bug is or what it depends on.
Such guesses are usually wrong. Even we cannot guess right about
such things without first using the debugger to find the facts.
File: as.info, Node: Acknowledgements, Next: GNU Free Documentation License, Prev: Reporting Bugs, Up: Top
10 Acknowledgements
*******************
If you have contributed to GAS and your name isn't listed here, it is
not meant as a slight. We just don't know about it. Send mail to the
maintainer, and we'll correct the situation. Currently the maintainer
is Ken Raeburn (email address `raeburn@cygnus.com').
Dean Elsner wrote the original GNU assembler for the VAX.(1)
Jay Fenlason maintained GAS for a while, adding support for
GDB-specific debug information and the 68k series machines, most of the
preprocessing pass, and extensive changes in `messages.c',
`input-file.c', `write.c'.
K. Richard Pixley maintained GAS for a while, adding various
enhancements and many bug fixes, including merging support for several
processors, breaking GAS up to handle multiple object file format back
ends (including heavy rewrite, testing, an integration of the coff and
b.out back ends), adding configuration including heavy testing and
verification of cross assemblers and file splits and renaming,
converted GAS to strictly ANSI C including full prototypes, added
support for m680[34]0 and cpu32, did considerable work on i960
including a COFF port (including considerable amounts of reverse
engineering), a SPARC opcode file rewrite, DECstation, rs6000, and
hp300hpux host ports, updated "know" assertions and made them work,
much other reorganization, cleanup, and lint.
Ken Raeburn wrote the high-level BFD interface code to replace most
of the code in format-specific I/O modules.
The original VMS support was contributed by David L. Kashtan. Eric
Youngdale has done much work with it since.
The Intel 80386 machine description was written by Eliot Dresselhaus.
Minh Tran-Le at IntelliCorp contributed some AIX 386 support.
The Motorola 88k machine description was contributed by Devon Bowen
of Buffalo University and Torbjorn Granlund of the Swedish Institute of
Computer Science.
Keith Knowles at the Open Software Foundation wrote the original
MIPS back end (`tc-mips.c', `tc-mips.h'), and contributed Rose format
support (which hasn't been merged in yet). Ralph Campbell worked with
the MIPS code to support a.out format.
Support for the Zilog Z8k and Renesas H8/300 processors (tc-z8k,
tc-h8300), and IEEE 695 object file format (obj-ieee), was written by
Steve Chamberlain of Cygnus Support. Steve also modified the COFF back
end to use BFD for some low-level operations, for use with the H8/300
and AMD 29k targets.
John Gilmore built the AMD 29000 support, added `.include' support,
and simplified the configuration of which versions accept which
directives. He updated the 68k machine description so that Motorola's
opcodes always produced fixed-size instructions (e.g., `jsr'), while
synthetic instructions remained shrinkable (`jbsr'). John fixed many
bugs, including true tested cross-compilation support, and one bug in
relaxation that took a week and required the proverbial one-bit fix.
Ian Lance Taylor of Cygnus Support merged the Motorola and MIT
syntax for the 68k, completed support for some COFF targets (68k, i386
SVR3, and SCO Unix), added support for MIPS ECOFF and ELF targets,
wrote the initial RS/6000 and PowerPC assembler, and made a few other
minor patches.
Steve Chamberlain made GAS able to generate listings.
Hewlett-Packard contributed support for the HP9000/300.
Jeff Law wrote GAS and BFD support for the native HPPA object format
(SOM) along with a fairly extensive HPPA testsuite (for both SOM and
ELF object formats). This work was supported by both the Center for
Software Science at the University of Utah and Cygnus Support.
Support for ELF format files has been worked on by Mark Eichin of
Cygnus Support (original, incomplete implementation for SPARC), Pete
Hoogenboom and Jeff Law at the University of Utah (HPPA mainly),
Michael Meissner of the Open Software Foundation (i386 mainly), and Ken
Raeburn of Cygnus Support (sparc, and some initial 64-bit support).
Linas Vepstas added GAS support for the ESA/390 "IBM 370"
architecture.
Richard Henderson rewrote the Alpha assembler. Klaus Kaempf wrote
GAS and BFD support for openVMS/Alpha.
Timothy Wall, Michael Hayes, and Greg Smart contributed to the
various tic* flavors.
David Heine, Sterling Augustine, Bob Wilson and John Ruttenberg from
Tensilica, Inc. added support for Xtensa processors.
Several engineers at Cygnus Support have also provided many small
bug fixes and configuration enhancements.
Many others have contributed large or small bugfixes and
enhancements. If you have contributed significant work and are not
mentioned on this list, and want to be, let us know. Some of the
history has been lost; we are not intentionally leaving anyone out.
---------- Footnotes ----------
(1) Any more details?
File: as.info, Node: GNU Free Documentation License, Next: Index, Prev: Acknowledgements, Up: Top
Appendix A GNU Free Documentation License
*****************************************
Version 1.1, March 2000
Copyright (C) 2000, 2003 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other
written document "free" in the sense of freedom: to assure everyone
the effective freedom to copy and redistribute it, with or without
modifying it, either commercially or noncommercially. Secondarily,
this License preserves for the author and publisher a way to get
credit for their work, while not being considered responsible for
modifications made by others.
This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense.
It complements the GNU General Public License, which is a copyleft
license designed for free software.
We have designed this License in order to use it for manuals for
free software, because free software needs free documentation: a
free program should come with manuals providing the same freedoms
that the software does. But this License is not limited to
software manuals; it can be used for any textual work, regardless
of subject matter or whether it is published as a printed book.
We recommend this License principally for works whose purpose is
instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work that contains a
notice placed by the copyright holder saying it can be distributed
under the terms of this License. The "Document", below, refers to
any such manual or work. Any member of the public is a licensee,
and is addressed as "you."
A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter
section of the Document that deals exclusively with the
relationship of the publishers or authors of the Document to the
Document's overall subject (or to related matters) and contains
nothing that could fall directly within that overall subject.
(For example, if the Document is in part a textbook of
mathematics, a Secondary Section may not explain any mathematics.)
The relationship could be a matter of historical connection with
the subject or with related matters, or of legal, commercial,
philosophical, ethical or political position regarding them.
The "Invariant Sections" are certain Secondary Sections whose
titles are designated, as being those of Invariant Sections, in
the notice that says that the Document is released under this
License.
The "Cover Texts" are certain short passages of text that are
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
that says that the Document is released under this License.
A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, whose contents can be viewed and edited directly
and straightforwardly with generic text editors or (for images
composed of pixels) generic paint programs or (for drawings) some
widely available drawing editor, and that is suitable for input to
text formatters or for automatic translation to a variety of
formats suitable for input to text formatters. A copy made in an
otherwise Transparent file format whose markup has been designed
to thwart or discourage subsequent modification by readers is not
Transparent. A copy that is not "Transparent" is called "Opaque."
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format,
SGML or XML using a publicly available DTD, and
standard-conforming simple HTML designed for human modification.
Opaque formats include PostScript, PDF, proprietary formats that
can be read and edited only by proprietary word processors, SGML
or XML for which the DTD and/or processing tools are not generally
available, and the machine-generated HTML produced by some word
processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the
material this License requires to appear in the title page. For
works in formats which do not have any title page as such, "Title
Page" means the text near the most prominent appearance of the
work's title, preceding the beginning of the body of the text.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either
commercially or noncommercially, provided that this License, the
copyright notices, and the license notice saying this License
applies to the Document are reproduced in all copies, and that you
add no other conditions whatsoever to those of this License. You
may not use technical measures to obstruct or control the reading
or further copying of the copies you make or distribute. However,
you may accept compensation in exchange for copies. If you
distribute a large enough number of copies you must also follow
the conditions in section 3.
You may also lend copies, under the same conditions stated above,
and you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies of the Document numbering more than
100, and the Document's license notice requires Cover Texts, you
must enclose the copies in covers that carry, clearly and legibly,
all these Cover Texts: Front-Cover Texts on the front cover, and
Back-Cover Texts on the back cover. Both covers must also clearly
and legibly identify you as the publisher of these copies. The
front cover must present the full title with all words of the
title equally prominent and visible. You may add other material
on the covers in addition. Copying with changes limited to the
covers, as long as they preserve the title of the Document and
satisfy these conditions, can be treated as verbatim copying in
other respects.
If the required texts for either cover are too voluminous to fit
legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto
adjacent pages.
If you publish or distribute Opaque copies of the Document
numbering more than 100, you must either include a
machine-readable Transparent copy along with each Opaque copy, or
state in or with each Opaque copy a publicly-accessible
computer-network location containing a complete Transparent copy
of the Document, free of added material, which the general
network-using public has access to download anonymously at no
charge using public-standard network protocols. If you use the
latter option, you must take reasonably prudent steps, when you
begin distribution of Opaque copies in quantity, to ensure that
this Transparent copy will remain thus accessible at the stated
location until at least one year after the last time you
distribute an Opaque copy (directly or through your agents or
retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of
the Document well before redistributing any large number of
copies, to give them a chance to provide you with an updated
version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document
under the conditions of sections 2 and 3 above, provided that you
release the Modified Version under precisely this License, with
the Modified Version filling the role of the Document, thus
licensing distribution and modification of the Modified Version to
whoever possesses a copy of it. In addition, you must do these
things in the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title
distinct from that of the Document, and from those of previous
versions (which should, if there were any, be listed in the
History section of the Document). You may use the same title
as a previous version if the original publisher of that version
gives permission.
B. List on the Title Page, as authors, one or more persons or
entities responsible for authorship of the modifications in the
Modified Version, together with at least five of the principal
authors of the Document (all of its principal authors, if it
has less than five).
C. State on the Title page the name of the publisher of the
Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications
adjacent to the other copyright notices.
F. Include, immediately after the copyright notices, a license
notice giving the public permission to use the Modified Version
under the terms of this License, in the form shown in the
Addendum below.
G. Preserve in that license notice the full lists of Invariant
Sections and required Cover Texts given in the Document's
license notice.
H. Include an unaltered copy of this License.
I. Preserve the section entitled "History", and its title, and add
to it an item stating at least the title, year, new authors, and
publisher of the Modified Version as given on the Title Page.
If there is no section entitled "History" in the Document,
create one stating the title, year, authors, and publisher of
the Document as given on its Title Page, then add an item
describing the Modified Version as stated in the previous
sentence.
J. Preserve the network location, if any, given in the Document for
public access to a Transparent copy of the Document, and
likewise the network locations given in the Document for
previous versions it was based on. These may be placed in the
"History" section. You may omit a network location for a work
that was published at least four years before the Document
itself, or if the original publisher of the version it refers
to gives permission.
K. In any section entitled "Acknowledgements" or "Dedications",
preserve the section's title, and preserve in the section all the
substance and tone of each of the contributor acknowledgements
and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document,
unaltered in their text and in their titles. Section numbers
or the equivalent are not considered part of the section titles.
M. Delete any section entitled "Endorsements." Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section as "Endorsements" or to
conflict in title with any Invariant Section.
If the Modified Version includes new front-matter sections or
appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option
designate some or all of these sections as invariant. To do this,
add their titles to the list of Invariant Sections in the Modified
Version's license notice. These titles must be distinct from any
other section titles.
You may add a section entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
parties-for example, statements of peer review or that the text has
been approved by an organization as the authoritative definition
of a standard.
You may add a passage of up to five words as a Front-Cover Text,
and a passage of up to 25 words as a Back-Cover Text, to the end
of the list of Cover Texts in the Modified Version. Only one
passage of Front-Cover Text and one of Back-Cover Text may be
added by (or through arrangements made by) any one entity. If the
Document already includes a cover text for the same cover,
previously added by you or by arrangement made by the same entity
you are acting on behalf of, you may not add another; but you may
replace the old one, on explicit permission from the previous
publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this
License give permission to use their names for publicity for or to
assert or imply endorsement of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under
this License, under the terms defined in section 4 above for
modified versions, provided that you include in the combination
all of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your
combined work in its license notice.
The combined work need only contain one copy of this License, and
multiple identical Invariant Sections may be replaced with a single
copy. If there are multiple Invariant Sections with the same name
but different contents, make the title of each such section unique
by adding at the end of it, in parentheses, the name of the
original author or publisher of that section if known, or else a
unique number. Make the same adjustment to the section titles in
the list of Invariant Sections in the license notice of the
combined work.
In the combination, you must combine any sections entitled
"History" in the various original documents, forming one section
entitled "History"; likewise combine any sections entitled
"Acknowledgements", and any sections entitled "Dedications." You
must delete all sections entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other
documents released under this License, and replace the individual
copies of this License in the various documents with a single copy
that is included in the collection, provided that you follow the
rules of this License for verbatim copying of each of the
documents in all other respects.
You may extract a single document from such a collection, and
distribute it individually under this License, provided you insert
a copy of this License into the extracted document, and follow
this License in all other respects regarding verbatim copying of
that document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other
separate and independent documents or works, in or on a volume of
a storage or distribution medium, does not as a whole count as a
Modified Version of the Document, provided no compilation
copyright is claimed for the compilation. Such a compilation is
called an "aggregate", and this License does not apply to the
other self-contained works thus compiled with the Document, on
account of their being thus compiled, if they are not themselves
derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one
quarter of the entire aggregate, the Document's Cover Texts may be
placed on covers that surround only the Document within the
aggregate. Otherwise they must appear on covers around the whole
aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may
distribute translations of the Document under the terms of section
4. Replacing Invariant Sections with translations requires special
permission from their copyright holders, but you may include
translations of some or all Invariant Sections in addition to the
original versions of these Invariant Sections. You may include a
translation of this License provided that you also include the
original English version of this License. In case of a
disagreement between the translation and the original English
version of this License, the original English version will prevail.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document
except as expressly provided for under this License. Any other
attempt to copy, modify, sublicense or distribute the Document is
void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights,
from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of
the GNU Free Documentation License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns. See
http://www.gnu.org/copyleft/.
Each version of the License is given a distinguishing version
number. If the Document specifies that a particular numbered
version of this License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that specified version or of any later version that has been
published (not as a draft) by the Free Software Foundation. If
the Document does not specify a version number of this License,
you may choose any version ever published (not as a draft) by the
Free Software Foundation.
ADDENDUM: How to use this License for your documents
====================================================
To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:
Copyright (C) YEAR YOUR NAME.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1
or any later version published by the Free Software Foundation;
with the Invariant Sections being LIST THEIR TITLES, with the
Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
A copy of the license is included in the section entitled "GNU
Free Documentation License."
If you have no Invariant Sections, write "with no Invariant Sections"
instead of saying which ones are invariant. If you have no Front-Cover
Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being
LIST"; likewise for Back-Cover Texts.
If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.
File: as.info, Node: Index, Prev: GNU Free Documentation License, Up: Top
Index
*****
[index ]
* Menu:
* #: Comments. (line 38)
* #APP: Preprocessing. (line 27)
* #NO_APP: Preprocessing. (line 27)
* $ in symbol names <1>: SH64-Chars. (line 10)
* $ in symbol names <2>: SH-Chars. (line 10)
* $ in symbol names <3>: D30V-Chars. (line 63)
* $ in symbol names: D10V-Chars. (line 46)
* $a: ARM Mapping Symbols. (line 9)
* $acos math builtin, TIC54X: TIC54X-Builtins. (line 10)
* $asin math builtin, TIC54X: TIC54X-Builtins. (line 13)
* $atan math builtin, TIC54X: TIC54X-Builtins. (line 16)
* $atan2 math builtin, TIC54X: TIC54X-Builtins. (line 19)
* $ceil math builtin, TIC54X: TIC54X-Builtins. (line 22)
* $cos math builtin, TIC54X: TIC54X-Builtins. (line 28)
* $cosh math builtin, TIC54X: TIC54X-Builtins. (line 25)
* $cvf math builtin, TIC54X: TIC54X-Builtins. (line 31)
* $cvi math builtin, TIC54X: TIC54X-Builtins. (line 34)
* $d: ARM Mapping Symbols. (line 15)
* $exp math builtin, TIC54X: TIC54X-Builtins. (line 37)
* $fabs math builtin, TIC54X: TIC54X-Builtins. (line 40)
* $firstch subsym builtin, TIC54X: TIC54X-Macros. (line 26)
* $floor math builtin, TIC54X: TIC54X-Builtins. (line 43)
* $fmod math builtin, TIC54X: TIC54X-Builtins. (line 47)
* $int math builtin, TIC54X: TIC54X-Builtins. (line 50)
* $iscons subsym builtin, TIC54X: TIC54X-Macros. (line 43)
* $isdefed subsym builtin, TIC54X: TIC54X-Macros. (line 34)
* $ismember subsym builtin, TIC54X: TIC54X-Macros. (line 38)
* $isname subsym builtin, TIC54X: TIC54X-Macros. (line 47)
* $isreg subsym builtin, TIC54X: TIC54X-Macros. (line 50)
* $lastch subsym builtin, TIC54X: TIC54X-Macros. (line 30)
* $ldexp math builtin, TIC54X: TIC54X-Builtins. (line 53)
* $log math builtin, TIC54X: TIC54X-Builtins. (line 59)
* $log10 math builtin, TIC54X: TIC54X-Builtins. (line 56)
* $max math builtin, TIC54X: TIC54X-Builtins. (line 62)
* $min math builtin, TIC54X: TIC54X-Builtins. (line 65)
* $pow math builtin, TIC54X: TIC54X-Builtins. (line 68)
* $round math builtin, TIC54X: TIC54X-Builtins. (line 71)
* $sgn math builtin, TIC54X: TIC54X-Builtins. (line 74)
* $sin math builtin, TIC54X: TIC54X-Builtins. (line 77)
* $sinh math builtin, TIC54X: TIC54X-Builtins. (line 80)
* $sqrt math builtin, TIC54X: TIC54X-Builtins. (line 83)
* $structacc subsym builtin, TIC54X: TIC54X-Macros. (line 57)
* $structsz subsym builtin, TIC54X: TIC54X-Macros. (line 54)
* $symcmp subsym builtin, TIC54X: TIC54X-Macros. (line 23)
* $symlen subsym builtin, TIC54X: TIC54X-Macros. (line 20)
* $t: ARM Mapping Symbols. (line 12)
* $tan math builtin, TIC54X: TIC54X-Builtins. (line 86)
* $tanh math builtin, TIC54X: TIC54X-Builtins. (line 89)
* $trunc math builtin, TIC54X: TIC54X-Builtins. (line 92)
* -+ option, VAX/VMS: VAX-Opts. (line 71)
* --: Command Line. (line 10)
* --32 option, i386: i386-Options. (line 8)
* --32 option, x86-64: i386-Options. (line 8)
* --64 option, i386: i386-Options. (line 8)
* --64 option, x86-64: i386-Options. (line 8)
* --absolute-literals: Xtensa Options. (line 22)
* --allow-reg-prefix: SH Options. (line 9)
* --alternate: alternate. (line 6)
* --base-size-default-16: M68K-Opts. (line 70)
* --base-size-default-32: M68K-Opts. (line 70)
* --big: SH Options. (line 9)
* --bitwise-or option, M680x0: M68K-Opts. (line 63)
* --disp-size-default-16: M68K-Opts. (line 79)
* --disp-size-default-32: M68K-Opts. (line 79)
* --divide option, i386: i386-Options. (line 24)
* --dsp: SH Options. (line 9)
* --emulation=crisaout command line option, CRIS: CRIS-Opts. (line 9)
* --emulation=criself command line option, CRIS: CRIS-Opts. (line 9)
* --enforce-aligned-data: Sparc-Aligned-Data. (line 11)
* --fatal-warnings: W. (line 16)
* --fixed-special-register-names command line option, MMIX: MMIX-Opts.
(line 8)
* --force-long-branchs: M68HC11-Opts. (line 69)
* --generate-example: M68HC11-Opts. (line 86)
* --globalize-symbols command line option, MMIX: MMIX-Opts. (line 12)
* --gnu-syntax command line option, MMIX: MMIX-Opts. (line 16)
* --hash-size=NUMBER: Overview. (line 297)
* --linker-allocated-gregs command line option, MMIX: MMIX-Opts.
(line 67)
* --listing-cont-lines: listing. (line 33)
* --listing-lhs-width: listing. (line 15)
* --listing-lhs-width2: listing. (line 20)
* --listing-rhs-width: listing. (line 27)
* --little: SH Options. (line 9)
* --longcalls: Xtensa Options. (line 36)
* --march=ARCHITECTURE command line option, CRIS: CRIS-Opts. (line 33)
* --MD: MD. (line 6)
* --mul-bug-abort command line option, CRIS: CRIS-Opts. (line 61)
* --no-absolute-literals: Xtensa Options. (line 22)
* --no-expand command line option, MMIX: MMIX-Opts. (line 31)
* --no-longcalls: Xtensa Options. (line 36)
* --no-merge-gregs command line option, MMIX: MMIX-Opts. (line 36)
* --no-mul-bug-abort command line option, CRIS: CRIS-Opts. (line 61)
* --no-predefined-syms command line option, MMIX: MMIX-Opts. (line 22)
* --no-pushj-stubs command line option, MMIX: MMIX-Opts. (line 54)
* --no-stubs command line option, MMIX: MMIX-Opts. (line 54)
* --no-target-align: Xtensa Options. (line 29)
* --no-text-section-literals: Xtensa Options. (line 9)
* --no-transform: Xtensa Options. (line 45)
* --no-underscore command line option, CRIS: CRIS-Opts. (line 15)
* --no-warn: W. (line 11)
* --pcrel: M68K-Opts. (line 91)
* --pic command line option, CRIS: CRIS-Opts. (line 27)
* --print-insn-syntax: M68HC11-Opts. (line 75)
* --print-opcodes: M68HC11-Opts. (line 79)
* --register-prefix-optional option, M680x0: M68K-Opts. (line 50)
* --relax: SH Options. (line 9)
* --relax command line option, MMIX: MMIX-Opts. (line 19)
* --rename-section: Xtensa Options. (line 53)
* --renesas: SH Options. (line 9)
* --short-branchs: M68HC11-Opts. (line 54)
* --small: SH Options. (line 9)
* --statistics: statistics. (line 6)
* --strict-direct-mode: M68HC11-Opts. (line 44)
* --target-align: Xtensa Options. (line 29)
* --text-section-literals: Xtensa Options. (line 9)
* --traditional-format: traditional-format. (line 6)
* --transform: Xtensa Options. (line 45)
* --underscore command line option, CRIS: CRIS-Opts. (line 15)
* --warn: W. (line 19)
* -1 option, VAX/VMS: VAX-Opts. (line 77)
* -32addr command line option, Alpha: Alpha Options. (line 50)
* -a: a. (line 6)
* -A options, i960: Options-i960. (line 6)
* -ac: a. (line 6)
* -ad: a. (line 6)
* -ah: a. (line 6)
* -al: a. (line 6)
* -an: a. (line 6)
* -as: a. (line 6)
* -Asparclet: Sparc-Opts. (line 25)
* -Asparclite: Sparc-Opts. (line 25)
* -Av6: Sparc-Opts. (line 25)
* -Av8: Sparc-Opts. (line 25)
* -Av9: Sparc-Opts. (line 25)
* -Av9a: Sparc-Opts. (line 25)
* -b option, i960: Options-i960. (line 22)
* -big option, M32R: M32R-Opts. (line 35)
* -construct-floats: MIPS Opts. (line 157)
* -D: D. (line 6)
* -D, ignored on VAX: VAX-Opts. (line 11)
* -d, VAX option: VAX-Opts. (line 16)
* -eabi= command line option, ARM: ARM Options. (line 107)
* -EB command line option, ARC: ARC Options. (line 31)
* -EB command line option, ARM: ARM Options. (line 112)
* -EB option (MIPS): MIPS Opts. (line 13)
* -EB option, M32R: M32R-Opts. (line 39)
* -EL command line option, ARC: ARC Options. (line 35)
* -EL command line option, ARM: ARM Options. (line 116)
* -EL option (MIPS): MIPS Opts. (line 13)
* -EL option, M32R: M32R-Opts. (line 32)
* -f: f. (line 6)
* -F command line option, Alpha: Alpha Options. (line 50)
* -G command line option, Alpha: Alpha Options. (line 46)
* -g command line option, Alpha: Alpha Options. (line 40)
* -G option (MIPS): MIPS Opts. (line 8)
* -H option, VAX/VMS: VAX-Opts. (line 81)
* -h option, VAX/VMS: VAX-Opts. (line 45)
* -I PATH: I. (line 6)
* -ignore-parallel-conflicts option, M32RX: M32R-Opts. (line 87)
* -Ip option, M32RX: M32R-Opts. (line 97)
* -J, ignored on VAX: VAX-Opts. (line 27)
* -K: K. (line 6)
* -k command line option, ARM: ARM Options. (line 120)
* -KPIC option, M32R: M32R-Opts. (line 42)
* -L: L. (line 6)
* -l option, M680x0: M68K-Opts. (line 38)
* -little option, M32R: M32R-Opts. (line 27)
* -M: M. (line 6)
* -m11/03: PDP-11-Options. (line 140)
* -m11/04: PDP-11-Options. (line 143)
* -m11/05: PDP-11-Options. (line 146)
* -m11/10: PDP-11-Options. (line 146)
* -m11/15: PDP-11-Options. (line 149)
* -m11/20: PDP-11-Options. (line 149)
* -m11/21: PDP-11-Options. (line 152)
* -m11/23: PDP-11-Options. (line 155)
* -m11/24: PDP-11-Options. (line 155)
* -m11/34: PDP-11-Options. (line 158)
* -m11/34a: PDP-11-Options. (line 161)
* -m11/35: PDP-11-Options. (line 164)
* -m11/40: PDP-11-Options. (line 164)
* -m11/44: PDP-11-Options. (line 167)
* -m11/45: PDP-11-Options. (line 170)
* -m11/50: PDP-11-Options. (line 170)
* -m11/53: PDP-11-Options. (line 173)
* -m11/55: PDP-11-Options. (line 170)
* -m11/60: PDP-11-Options. (line 176)
* -m11/70: PDP-11-Options. (line 170)
* -m11/73: PDP-11-Options. (line 173)
* -m11/83: PDP-11-Options. (line 173)
* -m11/84: PDP-11-Options. (line 173)
* -m11/93: PDP-11-Options. (line 173)
* -m11/94: PDP-11-Options. (line 173)
* -m16c option, M16C: M32C-Opts. (line 12)
* -m32c option, M32C: M32C-Opts. (line 9)
* -m32r option, M32R: M32R-Opts. (line 21)
* -m32rx option, M32R2: M32R-Opts. (line 17)
* -m32rx option, M32RX: M32R-Opts. (line 9)
* -m68000 and related options: M68K-Opts. (line 103)
* -m68hc11: M68HC11-Opts. (line 9)
* -m68hc12: M68HC11-Opts. (line 14)
* -m68hcs12: M68HC11-Opts. (line 21)
* -m[no-]68851 command line option, M680x0: M68K-Opts. (line 20)
* -m[no-]68881 command line option, M680x0: M68K-Opts. (line 20)
* -m[no-]div command line option, M680x0: M68K-Opts. (line 20)
* -m[no-]emac command line option, M680x0: M68K-Opts. (line 20)
* -m[no-]float command line option, M680x0: M68K-Opts. (line 20)
* -m[no-]mac command line option, M680x0: M68K-Opts. (line 20)
* -m[no-]usp command line option, M680x0: M68K-Opts. (line 20)
* -mall: PDP-11-Options. (line 26)
* -mall-extensions: PDP-11-Options. (line 26)
* -mapcs command line option, ARM: ARM Options. (line 80)
* -mapcs-float command line option, ARM: ARM Options. (line 93)
* -mapcs-reentrant command line option, ARM: ARM Options. (line 98)
* -marc[5|6|7|8] command line option, ARC: ARC Options. (line 6)
* -march= command line option, ARM: ARM Options. (line 37)
* -march= command line option, M680x0: M68K-Opts. (line 8)
* -matpcs command line option, ARM: ARM Options. (line 85)
* -mcis: PDP-11-Options. (line 32)
* -mconstant-gp command line option, IA-64: IA-64 Options. (line 6)
* -mCPU command line option, Alpha: Alpha Options. (line 6)
* -mcpu option, cpu: TIC54X-Opts. (line 15)
* -mcpu= command line option, ARM: ARM Options. (line 6)
* -mcpu= command line option, M680x0: M68K-Opts. (line 13)
* -mcsm: PDP-11-Options. (line 43)
* -mdebug command line option, Alpha: Alpha Options. (line 25)
* -me option, stderr redirect: TIC54X-Opts. (line 20)
* -meis: PDP-11-Options. (line 46)
* -merrors-to-file option, stderr redirect: TIC54X-Opts. (line 20)
* -mf option, far-mode: TIC54X-Opts. (line 8)
* -mf11: PDP-11-Options. (line 122)
* -mfar-mode option, far-mode: TIC54X-Opts. (line 8)
* -mfis: PDP-11-Options. (line 51)
* -mfloat-abi= command line option, ARM: ARM Options. (line 102)
* -mfp-11: PDP-11-Options. (line 56)
* -mfpp: PDP-11-Options. (line 56)
* -mfpu: PDP-11-Options. (line 56)
* -mfpu= command line option, ARM: ARM Options. (line 52)
* -mip2022 option, IP2K: IP2K-Opts. (line 14)
* -mip2022ext option, IP2022: IP2K-Opts. (line 9)
* -mj11: PDP-11-Options. (line 126)
* -mka11: PDP-11-Options. (line 92)
* -mkb11: PDP-11-Options. (line 95)
* -mkd11a: PDP-11-Options. (line 98)
* -mkd11b: PDP-11-Options. (line 101)
* -mkd11d: PDP-11-Options. (line 104)
* -mkd11e: PDP-11-Options. (line 107)
* -mkd11f: PDP-11-Options. (line 110)
* -mkd11h: PDP-11-Options. (line 110)
* -mkd11k: PDP-11-Options. (line 114)
* -mkd11q: PDP-11-Options. (line 110)
* -mkd11z: PDP-11-Options. (line 118)
* -mkev11: PDP-11-Options. (line 51)
* -mlimited-eis: PDP-11-Options. (line 64)
* -mlong: M68HC11-Opts. (line 32)
* -mlong-double: M68HC11-Opts. (line 40)
* -mmfpt: PDP-11-Options. (line 70)
* -mmicrocode: PDP-11-Options. (line 83)
* -mmutiproc: PDP-11-Options. (line 73)
* -mmxps: PDP-11-Options. (line 77)
* -mno-cis: PDP-11-Options. (line 32)
* -mno-csm: PDP-11-Options. (line 43)
* -mno-eis: PDP-11-Options. (line 46)
* -mno-extensions: PDP-11-Options. (line 29)
* -mno-fis: PDP-11-Options. (line 51)
* -mno-fp-11: PDP-11-Options. (line 56)
* -mno-fpp: PDP-11-Options. (line 56)
* -mno-fpu: PDP-11-Options. (line 56)
* -mno-kev11: PDP-11-Options. (line 51)
* -mno-limited-eis: PDP-11-Options. (line 64)
* -mno-mfpt: PDP-11-Options. (line 70)
* -mno-microcode: PDP-11-Options. (line 83)
* -mno-mutiproc: PDP-11-Options. (line 73)
* -mno-mxps: PDP-11-Options. (line 77)
* -mno-pic: PDP-11-Options. (line 11)
* -mno-spl: PDP-11-Options. (line 80)
* -mno-sym32: MIPS Opts. (line 145)
* -mpic: PDP-11-Options. (line 11)
* -mrelax command line option, V850: V850 Options. (line 51)
* -mshort: M68HC11-Opts. (line 27)
* -mshort-double: M68HC11-Opts. (line 36)
* -mspl: PDP-11-Options. (line 80)
* -msym32: MIPS Opts. (line 145)
* -mt11: PDP-11-Options. (line 130)
* -mthumb command line option, ARM: ARM Options. (line 71)
* -mthumb-interwork command line option, ARM: ARM Options. (line 76)
* -mv850 command line option, V850: V850 Options. (line 23)
* -mv850any command line option, V850: V850 Options. (line 41)
* -mv850e command line option, V850: V850 Options. (line 29)
* -mv850e1 command line option, V850: V850 Options. (line 35)
* -N command line option, CRIS: CRIS-Opts. (line 57)
* -nIp option, M32RX: M32R-Opts. (line 101)
* -no-bitinst, M32R2: M32R-Opts. (line 54)
* -no-construct-floats: MIPS Opts. (line 157)
* -no-ignore-parallel-conflicts option, M32RX: M32R-Opts. (line 93)
* -no-mdebug command line option, Alpha: Alpha Options. (line 25)
* -no-parallel option, M32RX: M32R-Opts. (line 51)
* -no-relax option, i960: Options-i960. (line 66)
* -no-warn-explicit-parallel-conflicts option, M32RX: M32R-Opts.
(line 79)
* -no-warn-unmatched-high option, M32R: M32R-Opts. (line 111)
* -nocpp ignored (MIPS): MIPS Opts. (line 148)
* -o: o. (line 6)
* -O option, M32RX: M32R-Opts. (line 59)
* -parallel option, M32RX: M32R-Opts. (line 46)
* -R: R. (line 6)
* -r800 command line option, Z80: Z80 Options. (line 41)
* -relax command line option, Alpha: Alpha Options. (line 32)
* -S, ignored on VAX: VAX-Opts. (line 11)
* -t, ignored on VAX: VAX-Opts. (line 36)
* -T, ignored on VAX: VAX-Opts. (line 11)
* -v: v. (line 6)
* -V, redundant on VAX: VAX-Opts. (line 22)
* -version: v. (line 6)
* -W: W. (line 11)
* -warn-explicit-parallel-conflicts option, M32RX: M32R-Opts. (line 65)
* -warn-unmatched-high option, M32R: M32R-Opts. (line 105)
* -Wnp option, M32RX: M32R-Opts. (line 83)
* -Wnuh option, M32RX: M32R-Opts. (line 117)
* -Wp option, M32RX: M32R-Opts. (line 75)
* -wsigned_overflow command line option, V850: V850 Options. (line 9)
* -Wuh option, M32RX: M32R-Opts. (line 114)
* -wunsigned_overflow command line option, V850: V850 Options.
(line 16)
* -x command line option, MMIX: MMIX-Opts. (line 44)
* -z80 command line option, Z80: Z80 Options. (line 8)
* -z8001 command line option, Z8000: Z8000 Options. (line 6)
* -z8002 command line option, Z8000: Z8000 Options. (line 9)
* . (symbol): Dot. (line 6)
* .arch directive, ARM: ARM Directives. (line 164)
* .big directive, M32RX: M32R-Directives. (line 88)
* .cantunwind directive, ARM: ARM Directives. (line 87)
* .cpu directive, ARM: ARM Directives. (line 160)
* .eabi_attribute directive, ARM: ARM Directives. (line 172)
* .fnend directive, ARM: ARM Directives. (line 78)
* .fnstart directive, ARM: ARM Directives. (line 75)
* .fpu directive, ARM: ARM Directives. (line 168)
* .handlerdata directive, ARM: ARM Directives. (line 98)
* .insn: MIPS insn. (line 6)
* .little directive, M32RX: M32R-Directives. (line 82)
* .ltorg directive, ARM: ARM Directives. (line 58)
* .m32r directive, M32R: M32R-Directives. (line 66)
* .m32r2 directive, M32R2: M32R-Directives. (line 77)
* .m32rx directive, M32RX: M32R-Directives. (line 72)
* .movsp directive, ARM: ARM Directives. (line 136)
* .o: Object. (line 6)
* .pad directive, ARM: ARM Directives. (line 131)
* .param on HPPA: HPPA Directives. (line 19)
* .personality directive, ARM: ARM Directives. (line 91)
* .personalityindex directive, ARM: ARM Directives. (line 94)
* .pool directive, ARM: ARM Directives. (line 72)
* .save directive, ARM: ARM Directives. (line 107)
* .set autoextend: MIPS autoextend. (line 6)
* .set dsp: MIPS ASE instruction generation overrides.
(line 16)
* .set mdmx: MIPS ASE instruction generation overrides.
(line 11)
* .set mips3d: MIPS ASE instruction generation overrides.
(line 6)
* .set mipsN: MIPS ISA. (line 6)
* .set mt: MIPS ASE instruction generation overrides.
(line 21)
* .set noautoextend: MIPS autoextend. (line 6)
* .set nodsp: MIPS ASE instruction generation overrides.
(line 16)
* .set nomdmx: MIPS ASE instruction generation overrides.
(line 11)
* .set nomips3d: MIPS ASE instruction generation overrides.
(line 6)
* .set nomt: MIPS ASE instruction generation overrides.
(line 21)
* .set nosym32: MIPS symbol sizes. (line 6)
* .set pop: MIPS option stack. (line 6)
* .set push: MIPS option stack. (line 6)
* .set sym32: MIPS symbol sizes. (line 6)
* .setfp directive, ARM: ARM Directives. (line 139)
* .unwind_raw directive, ARM: ARM Directives. (line 153)
* .v850 directive, V850: V850 Directives. (line 14)
* .v850e directive, V850: V850 Directives. (line 20)
* .v850e1 directive, V850: V850 Directives. (line 26)
* .z8001: Z8000 Directives. (line 11)
* .z8002: Z8000 Directives. (line 15)
* 16-bit code, i386: i386-16bit. (line 6)
* 2byte directive, ARC: ARC Directives. (line 9)
* 3byte directive, ARC: ARC Directives. (line 12)
* 3DNow!, i386: i386-SIMD. (line 6)
* 3DNow!, x86-64: i386-SIMD. (line 6)
* 430 support: MSP430-Dependent. (line 6)
* 4byte directive, ARC: ARC Directives. (line 15)
* : (label): Statements. (line 30)
* @word modifier, D10V: D10V-Word. (line 6)
* \" (doublequote character): Strings. (line 43)
* \\ (\ character): Strings. (line 40)
* \b (backspace character): Strings. (line 15)
* \DDD (octal character code): Strings. (line 30)
* \f (formfeed character): Strings. (line 18)
* \n (newline character): Strings. (line 21)
* \r (carriage return character): Strings. (line 24)
* \t (tab): Strings. (line 27)
* \XD... (hex character code): Strings. (line 36)
* _ opcode prefix: Xtensa Opcodes. (line 9)
* a.out: Object. (line 6)
* a.out symbol attributes: a.out Symbols. (line 6)
* A_DIR environment variable, TIC54X: TIC54X-Env. (line 6)
* ABI options, SH64: SH64 Options. (line 29)
* ABORT directive: ABORT. (line 6)
* abort directive: Abort. (line 6)
* absolute section: Ld Sections. (line 29)
* absolute-literals directive: Absolute Literals Directive.
(line 6)
* ADDI instructions, relaxation: Xtensa Immediate Relaxation.
(line 43)
* addition, permitted arguments: Infix Ops. (line 44)
* addresses: Expressions. (line 6)
* addresses, format of: Secs Background. (line 68)
* addressing modes, D10V: D10V-Addressing. (line 6)
* addressing modes, D30V: D30V-Addressing. (line 6)
* addressing modes, H8/300: H8/300-Addressing. (line 6)
* addressing modes, M680x0: M68K-Syntax. (line 21)
* addressing modes, M68HC11: M68HC11-Syntax. (line 17)
* addressing modes, SH: SH-Addressing. (line 6)
* addressing modes, SH64: SH64-Addressing. (line 6)
* addressing modes, Z8000: Z8000-Addressing. (line 6)
* ADR reg,<label> pseudo op, ARM: ARM Opcodes. (line 25)
* ADRL reg,<label> pseudo op, ARM: ARM Opcodes. (line 35)
* advancing location counter: Org. (line 6)
* align directive: Align. (line 6)
* align directive, ARM: ARM Directives. (line 6)
* align directive, SPARC: Sparc-Directives. (line 9)
* align directive, TIC54X: TIC54X-Directives. (line 6)
* alignment of branch targets: Xtensa Automatic Alignment.
(line 6)
* alignment of ENTRY instructions: Xtensa Automatic Alignment.
(line 6)
* alignment of LOOP instructions: Xtensa Automatic Alignment.
(line 6)
* Alpha floating point (IEEE): Alpha Floating Point.
(line 6)
* Alpha line comment character: Alpha-Chars. (line 6)
* Alpha line separator: Alpha-Chars. (line 8)
* Alpha notes: Alpha Notes. (line 6)
* Alpha options: Alpha Options. (line 6)
* Alpha registers: Alpha-Regs. (line 6)
* Alpha relocations: Alpha-Relocs. (line 6)
* Alpha support: Alpha-Dependent. (line 6)
* Alpha Syntax: Alpha Options. (line 54)
* Alpha-only directives: Alpha Directives. (line 10)
* altered difference tables: Word. (line 12)
* alternate syntax for the 680x0: M68K-Moto-Syntax. (line 6)
* ARC floating point (IEEE): ARC Floating Point. (line 6)
* ARC machine directives: ARC Directives. (line 6)
* ARC opcodes: ARC Opcodes. (line 6)
* ARC options (none): ARC Options. (line 6)
* ARC register names: ARC-Regs. (line 6)
* ARC special characters: ARC-Chars. (line 6)
* ARC support: ARC-Dependent. (line 6)
* arc5 arc5, ARC: ARC Options. (line 10)
* arc6 arc6, ARC: ARC Options. (line 13)
* arc7 arc7, ARC: ARC Options. (line 21)
* arc8 arc8, ARC: ARC Options. (line 24)
* arch directive, i386: i386-Arch. (line 6)
* arch directive, M680x0: M68K-Directives. (line 22)
* arch directive, x86-64: i386-Arch. (line 6)
* architecture options, i960: Options-i960. (line 6)
* architecture options, IP2022: IP2K-Opts. (line 9)
* architecture options, IP2K: IP2K-Opts. (line 14)
* architecture options, M16C: M32C-Opts. (line 12)
* architecture options, M32C: M32C-Opts. (line 9)
* architecture options, M32R: M32R-Opts. (line 21)
* architecture options, M32R2: M32R-Opts. (line 17)
* architecture options, M32RX: M32R-Opts. (line 9)
* architecture options, M680x0: M68K-Opts. (line 103)
* Architecture variant option, CRIS: CRIS-Opts. (line 33)
* architectures, PowerPC: PowerPC-Opts. (line 6)
* architectures, SPARC: Sparc-Opts. (line 6)
* arguments for addition: Infix Ops. (line 44)
* arguments for subtraction: Infix Ops. (line 49)
* arguments in expressions: Arguments. (line 6)
* arithmetic functions: Operators. (line 6)
* arithmetic operands: Arguments. (line 6)
* arm directive, ARM: ARM Directives. (line 36)
* ARM floating point (IEEE): ARM Floating Point. (line 6)
* ARM identifiers: ARM-Chars. (line 15)
* ARM immediate character: ARM-Chars. (line 13)
* ARM line comment character: ARM-Chars. (line 6)
* ARM line separator: ARM-Chars. (line 10)
* ARM machine directives: ARM Directives. (line 6)
* ARM opcodes: ARM Opcodes. (line 6)
* ARM options (none): ARM Options. (line 6)
* ARM register names: ARM-Regs. (line 6)
* ARM support: ARM-Dependent. (line 6)
* ascii directive: Ascii. (line 6)
* asciz directive: Asciz. (line 6)
* asg directive, TIC54X: TIC54X-Directives. (line 20)
* assembler bugs, reporting: Bug Reporting. (line 6)
* assembler crash: Bug Criteria. (line 9)
* assembler directive .arch, CRIS: CRIS-Pseudos. (line 45)
* assembler directive .dword, CRIS: CRIS-Pseudos. (line 12)
* assembler directive .far, M68HC11: M68HC11-Directives. (line 20)
* assembler directive .interrupt, M68HC11: M68HC11-Directives.
(line 26)
* assembler directive .mode, M68HC11: M68HC11-Directives. (line 16)
* assembler directive .relax, M68HC11: M68HC11-Directives. (line 10)
* assembler directive .syntax, CRIS: CRIS-Pseudos. (line 17)
* assembler directive .xrefb, M68HC11: M68HC11-Directives. (line 31)
* assembler directive BSPEC, MMIX: MMIX-Pseudos. (line 131)
* assembler directive BYTE, MMIX: MMIX-Pseudos. (line 97)
* assembler directive ESPEC, MMIX: MMIX-Pseudos. (line 131)
* assembler directive GREG, MMIX: MMIX-Pseudos. (line 50)
* assembler directive IS, MMIX: MMIX-Pseudos. (line 42)
* assembler directive LOC, MMIX: MMIX-Pseudos. (line 7)
* assembler directive LOCAL, MMIX: MMIX-Pseudos. (line 28)
* assembler directive OCTA, MMIX: MMIX-Pseudos. (line 108)
* assembler directive PREFIX, MMIX: MMIX-Pseudos. (line 120)
* assembler directive TETRA, MMIX: MMIX-Pseudos. (line 108)
* assembler directive WYDE, MMIX: MMIX-Pseudos. (line 108)
* assembler directives, CRIS: CRIS-Pseudos. (line 6)
* assembler directives, M68HC11: M68HC11-Directives. (line 6)
* assembler directives, M68HC12: M68HC11-Directives. (line 6)
* assembler directives, MMIX: MMIX-Pseudos. (line 6)
* assembler internal logic error: As Sections. (line 13)
* assembler version: v. (line 6)
* assembler, and linker: Secs Background. (line 10)
* assembly listings, enabling: a. (line 6)
* assigning values to symbols <1>: Equ. (line 6)
* assigning values to symbols: Setting Symbols. (line 6)
* atmp directive, i860: Directives-i860. (line 16)
* att_syntax pseudo op, i386: i386-Syntax. (line 6)
* att_syntax pseudo op, x86-64: i386-Syntax. (line 6)
* attributes, symbol: Symbol Attributes. (line 6)
* auxiliary attributes, COFF symbols: COFF Symbols. (line 19)
* auxiliary symbol information, COFF: Dim. (line 6)
* Av7: Sparc-Opts. (line 25)
* backslash (\\): Strings. (line 40)
* backspace (\b): Strings. (line 15)
* balign directive: Balign. (line 6)
* balignl directive: Balign. (line 27)
* balignw directive: Balign. (line 27)
* bes directive, TIC54X: TIC54X-Directives. (line 197)
* BFIN directives: BFIN Directives. (line 6)
* BFIN syntax: BFIN Syntax. (line 6)
* big endian output, MIPS: Overview. (line 606)
* big endian output, PJ: Overview. (line 513)
* big-endian output, MIPS: MIPS Opts. (line 13)
* bignums: Bignums. (line 6)
* binary constants, TIC54X: TIC54X-Constants. (line 8)
* binary files, including: Incbin. (line 6)
* binary integers: Integers. (line 6)
* bit names, IA-64: IA-64-Bits. (line 6)
* bitfields, not supported on VAX: VAX-no. (line 6)
* Blackfin support: BFIN-Dependent. (line 6)
* block: Z8000 Directives. (line 55)
* branch improvement, M680x0: M68K-Branch. (line 6)
* branch improvement, M68HC11: M68HC11-Branch. (line 6)
* branch improvement, VAX: VAX-branch. (line 6)
* branch instructions, relaxation: Xtensa Branch Relaxation.
(line 6)
* branch recording, i960: Options-i960. (line 22)
* branch statistics table, i960: Options-i960. (line 40)
* branch target alignment: Xtensa Automatic Alignment.
(line 6)
* break directive, TIC54X: TIC54X-Directives. (line 143)
* BSD syntax: PDP-11-Syntax. (line 6)
* bss directive, i960: Directives-i960. (line 6)
* bss directive, TIC54X: TIC54X-Directives. (line 29)
* bss section <1>: bss. (line 6)
* bss section: Ld Sections. (line 20)
* bug criteria: Bug Criteria. (line 6)
* bug reports: Bug Reporting. (line 6)
* bugs in assembler: Reporting Bugs. (line 6)
* Built-in symbols, CRIS: CRIS-Symbols. (line 6)
* builtin math functions, TIC54X: TIC54X-Builtins. (line 6)
* builtin subsym functions, TIC54X: TIC54X-Macros. (line 16)
* bus lock prefixes, i386: i386-Prefixes. (line 36)
* bval: Z8000 Directives. (line 30)
* byte directive: Byte. (line 6)
* byte directive, TIC54X: TIC54X-Directives. (line 36)
* C54XDSP_DIR environment variable, TIC54X: TIC54X-Env. (line 6)
* c_mode directive, TIC54X: TIC54X-Directives. (line 51)
* call instructions, i386: i386-Mnemonics. (line 51)
* call instructions, relaxation: Xtensa Call Relaxation.
(line 6)
* call instructions, x86-64: i386-Mnemonics. (line 51)
* callj, i960 pseudo-opcode: callj-i960. (line 6)
* carriage return (\r): Strings. (line 24)
* case sensitivity, Z80: Z80-Case. (line 6)
* cfi_endproc directive: CFI directives. (line 14)
* cfi_startproc directive: CFI directives. (line 6)
* char directive, TIC54X: TIC54X-Directives. (line 36)
* character constant, Z80: Z80-Chars. (line 13)
* character constants: Characters. (line 6)
* character escape codes: Strings. (line 15)
* character escapes, Z80: Z80-Chars. (line 11)
* character, single: Chars. (line 6)
* characters used in symbols: Symbol Intro. (line 6)
* clink directive, TIC54X: TIC54X-Directives. (line 45)
* code directive, ARM: ARM Directives. (line 29)
* code16 directive, i386: i386-16bit. (line 6)
* code16gcc directive, i386: i386-16bit. (line 6)
* code32 directive, i386: i386-16bit. (line 6)
* code64 directive, i386: i386-16bit. (line 6)
* code64 directive, x86-64: i386-16bit. (line 6)
* COFF auxiliary symbol information: Dim. (line 6)
* COFF structure debugging: Tag. (line 6)
* COFF symbol attributes: COFF Symbols. (line 6)
* COFF symbol descriptor: Desc. (line 6)
* COFF symbol storage class: Scl. (line 6)
* COFF symbol type: Type. (line 11)
* COFF symbols, debugging: Def. (line 6)
* COFF value attribute: Val. (line 6)
* COMDAT: Linkonce. (line 6)
* comm directive: Comm. (line 6)
* command line conventions: Command Line. (line 6)
* command line options, V850: V850 Options. (line 9)
* command-line options ignored, VAX: VAX-Opts. (line 6)
* comments: Comments. (line 6)
* comments, M680x0: M68K-Chars. (line 6)
* comments, removed by preprocessor: Preprocessing. (line 11)
* common directive, SPARC: Sparc-Directives. (line 12)
* common sections: Linkonce. (line 6)
* common variable storage: bss. (line 6)
* compare and jump expansions, i960: Compare-and-branch-i960.
(line 13)
* compare/branch instructions, i960: Compare-and-branch-i960.
(line 6)
* comparison expressions: Infix Ops. (line 55)
* conditional assembly: If. (line 6)
* constant, single character: Chars. (line 6)
* constants: Constants. (line 6)
* constants, bignum: Bignums. (line 6)
* constants, character: Characters. (line 6)
* constants, converted by preprocessor: Preprocessing. (line 14)
* constants, floating point: Flonums. (line 6)
* constants, integer: Integers. (line 6)
* constants, number: Numbers. (line 6)
* constants, string: Strings. (line 6)
* constants, TIC54X: TIC54X-Constants. (line 6)
* conversion instructions, i386: i386-Mnemonics. (line 32)
* conversion instructions, x86-64: i386-Mnemonics. (line 32)
* coprocessor wait, i386: i386-Prefixes. (line 40)
* copy directive, TIC54X: TIC54X-Directives. (line 54)
* cpu directive, M680x0: M68K-Directives. (line 30)
* crash of assembler: Bug Criteria. (line 9)
* CRIS --emulation=crisaout command line option: CRIS-Opts. (line 9)
* CRIS --emulation=criself command line option: CRIS-Opts. (line 9)
* CRIS --march=ARCHITECTURE command line option: CRIS-Opts. (line 33)
* CRIS --mul-bug-abort command line option: CRIS-Opts. (line 61)
* CRIS --no-mul-bug-abort command line option: CRIS-Opts. (line 61)
* CRIS --no-underscore command line option: CRIS-Opts. (line 15)
* CRIS --pic command line option: CRIS-Opts. (line 27)
* CRIS --underscore command line option: CRIS-Opts. (line 15)
* CRIS -N command line option: CRIS-Opts. (line 57)
* CRIS architecture variant option: CRIS-Opts. (line 33)
* CRIS assembler directive .arch: CRIS-Pseudos. (line 45)
* CRIS assembler directive .dword: CRIS-Pseudos. (line 12)
* CRIS assembler directive .syntax: CRIS-Pseudos. (line 17)
* CRIS assembler directives: CRIS-Pseudos. (line 6)
* CRIS built-in symbols: CRIS-Symbols. (line 6)
* CRIS instruction expansion: CRIS-Expand. (line 6)
* CRIS line comment characters: CRIS-Chars. (line 6)
* CRIS options: CRIS-Opts. (line 6)
* CRIS position-independent code: CRIS-Opts. (line 27)
* CRIS pseudo-op .arch: CRIS-Pseudos. (line 45)
* CRIS pseudo-op .dword: CRIS-Pseudos. (line 12)
* CRIS pseudo-op .syntax: CRIS-Pseudos. (line 17)
* CRIS pseudo-ops: CRIS-Pseudos. (line 6)
* CRIS register names: CRIS-Regs. (line 6)
* CRIS support: CRIS-Dependent. (line 6)
* CRIS symbols in position-independent code: CRIS-Pic. (line 6)
* ctbp register, V850: V850-Regs. (line 131)
* ctoff pseudo-op, V850: V850 Opcodes. (line 111)
* ctpc register, V850: V850-Regs. (line 119)
* ctpsw register, V850: V850-Regs. (line 122)
* current address: Dot. (line 6)
* current address, advancing: Org. (line 6)
* D10V @word modifier: D10V-Word. (line 6)
* D10V addressing modes: D10V-Addressing. (line 6)
* D10V floating point: D10V-Float. (line 6)
* D10V line comment character: D10V-Chars. (line 6)
* D10V opcode summary: D10V-Opcodes. (line 6)
* D10V optimization: Overview. (line 391)
* D10V options: D10V-Opts. (line 6)
* D10V registers: D10V-Regs. (line 6)
* D10V size modifiers: D10V-Size. (line 6)
* D10V sub-instruction ordering: D10V-Chars. (line 6)
* D10V sub-instructions: D10V-Subs. (line 6)
* D10V support: D10V-Dependent. (line 6)
* D10V syntax: D10V-Syntax. (line 6)
* D30V addressing modes: D30V-Addressing. (line 6)
* D30V floating point: D30V-Float. (line 6)
* D30V Guarded Execution: D30V-Guarded. (line 6)
* D30V line comment character: D30V-Chars. (line 6)
* D30V nops: Overview. (line 399)
* D30V nops after 32-bit multiply: Overview. (line 402)
* D30V opcode summary: D30V-Opcodes. (line 6)
* D30V optimization: Overview. (line 396)
* D30V options: D30V-Opts. (line 6)
* D30V registers: D30V-Regs. (line 6)
* D30V size modifiers: D30V-Size. (line 6)
* D30V sub-instruction ordering: D30V-Chars. (line 6)
* D30V sub-instructions: D30V-Subs. (line 6)
* D30V support: D30V-Dependent. (line 6)
* D30V syntax: D30V-Syntax. (line 6)
* data alignment on SPARC: Sparc-Aligned-Data. (line 6)
* data and text sections, joining: R. (line 6)
* data directive: Data. (line 6)
* data directive, TIC54X: TIC54X-Directives. (line 61)
* data section: Ld Sections. (line 9)
* data1 directive, M680x0: M68K-Directives. (line 9)
* data2 directive, M680x0: M68K-Directives. (line 12)
* datalabel, SH64: SH64-Addressing. (line 16)
* dbpc register, V850: V850-Regs. (line 125)
* dbpsw register, V850: V850-Regs. (line 128)
* debuggers, and symbol order: Symbols. (line 10)
* debugging COFF symbols: Def. (line 6)
* DEC syntax: PDP-11-Syntax. (line 6)
* decimal integers: Integers. (line 12)
* def directive: Def. (line 6)
* def directive, TIC54X: TIC54X-Directives. (line 103)
* density instructions: Density Instructions.
(line 6)
* dependency tracking: MD. (line 6)
* deprecated directives: Deprecated. (line 6)
* desc directive: Desc. (line 6)
* descriptor, of a.out symbol: Symbol Desc. (line 6)
* dfloat directive, VAX: VAX-directives. (line 10)
* difference tables altered: Word. (line 12)
* difference tables, warning: K. (line 6)
* differences, mmixal: MMIX-mmixal. (line 6)
* dim directive: Dim. (line 6)
* directives and instructions: Statements. (line 19)
* directives for PowerPC: PowerPC-Pseudo. (line 6)
* directives, BFIN: BFIN Directives. (line 6)
* directives, M32R: M32R-Directives. (line 6)
* directives, M680x0: M68K-Directives. (line 6)
* directives, machine independent: Pseudo Ops. (line 6)
* directives, Xtensa: Xtensa Directives. (line 6)
* directives, Z8000: Z8000 Directives. (line 6)
* displacement sizing character, VAX: VAX-operands. (line 12)
* dollar local symbols: Symbol Names. (line 91)
* dot (symbol): Dot. (line 6)
* double directive: Double. (line 6)
* double directive, i386: i386-Float. (line 14)
* double directive, M680x0: M68K-Float. (line 14)
* double directive, M68HC11: M68HC11-Float. (line 14)
* double directive, TIC54X: TIC54X-Directives. (line 64)
* double directive, VAX: VAX-float. (line 15)
* double directive, x86-64: i386-Float. (line 14)
* doublequote (\"): Strings. (line 43)
* drlist directive, TIC54X: TIC54X-Directives. (line 73)
* drnolist directive, TIC54X: TIC54X-Directives. (line 73)
* dual directive, i860: Directives-i860. (line 6)
* ECOFF sections: MIPS Object. (line 6)
* ecr register, V850: V850-Regs. (line 113)
* eight-byte integer: Quad. (line 9)
* eipc register, V850: V850-Regs. (line 101)
* eipsw register, V850: V850-Regs. (line 104)
* eject directive: Eject. (line 6)
* ELF symbol type: Type. (line 22)
* else directive: Else. (line 6)
* elseif directive: Elseif. (line 6)
* empty expressions: Empty Exprs. (line 6)
* emsg directive, TIC54X: TIC54X-Directives. (line 77)
* emulation: Overview. (line 697)
* end directive: End. (line 6)
* enddual directive, i860: Directives-i860. (line 11)
* endef directive: Endef. (line 6)
* endfunc directive: Endfunc. (line 6)
* endianness, MIPS: Overview. (line 606)
* endianness, PJ: Overview. (line 513)
* endif directive: Endif. (line 6)
* endloop directive, TIC54X: TIC54X-Directives. (line 143)
* endm directive: Macro. (line 96)
* endm directive, TIC54X: TIC54X-Directives. (line 153)
* endstruct directive, TIC54X: TIC54X-Directives. (line 217)
* endunion directive, TIC54X: TIC54X-Directives. (line 251)
* ENTRY instructions, alignment: Xtensa Automatic Alignment.
(line 6)
* environment settings, TIC54X: TIC54X-Env. (line 6)
* EOF, newline must precede: Statements. (line 13)
* ep register, V850: V850-Regs. (line 95)
* equ directive: Equ. (line 6)
* equ directive, TIC54X: TIC54X-Directives. (line 192)
* equiv directive: Equiv. (line 6)
* eqv directive: Eqv. (line 6)
* err directive: Err. (line 6)
* error directive: Error. (line 6)
* error messages: Errors. (line 6)
* error on valid input: Bug Criteria. (line 12)
* errors, caused by warnings: W. (line 16)
* errors, continuing after: Z. (line 6)
* ESA/390 floating point (IEEE): ESA/390 Floating Point.
(line 6)
* ESA/390 support: ESA/390-Dependent. (line 6)
* ESA/390 Syntax: ESA/390 Options. (line 8)
* ESA/390-only directives: ESA/390 Directives. (line 12)
* escape codes, character: Strings. (line 15)
* eval directive, TIC54X: TIC54X-Directives. (line 24)
* even: Z8000 Directives. (line 58)
* even directive, M680x0: M68K-Directives. (line 15)
* even directive, TIC54X: TIC54X-Directives. (line 6)
* exitm directive: Macro. (line 99)
* expr (internal section): As Sections. (line 17)
* expression arguments: Arguments. (line 6)
* expressions: Expressions. (line 6)
* expressions, comparison: Infix Ops. (line 55)
* expressions, empty: Empty Exprs. (line 6)
* expressions, integer: Integer Exprs. (line 6)
* extAuxRegister directive, ARC: ARC Directives. (line 18)
* extCondCode directive, ARC: ARC Directives. (line 41)
* extCoreRegister directive, ARC: ARC Directives. (line 53)
* extend directive M680x0: M68K-Float. (line 17)
* extend directive M68HC11: M68HC11-Float. (line 17)
* extended directive, i960: Directives-i960. (line 13)
* extern directive: Extern. (line 6)
* extInstruction directive, ARC: ARC Directives. (line 78)
* fail directive: Fail. (line 6)
* far_mode directive, TIC54X: TIC54X-Directives. (line 82)
* faster processing (-f): f. (line 6)
* fatal signal: Bug Criteria. (line 9)
* fclist directive, TIC54X: TIC54X-Directives. (line 87)
* fcnolist directive, TIC54X: TIC54X-Directives. (line 87)
* fepc register, V850: V850-Regs. (line 107)
* fepsw register, V850: V850-Regs. (line 110)
* ffloat directive, VAX: VAX-directives. (line 14)
* field directive, TIC54X: TIC54X-Directives. (line 91)
* file directive <1>: File. (line 6)
* file directive: LNS directives. (line 6)
* file directive, MSP 430: MSP430 Directives. (line 6)
* file name, logical: File. (line 6)
* files, including: Include. (line 6)
* files, input: Input Files. (line 6)
* fill directive: Fill. (line 6)
* filling memory <1>: Space. (line 6)
* filling memory: Skip. (line 6)
* FLIX syntax: Xtensa Syntax. (line 6)
* float directive: Float. (line 6)
* float directive, i386: i386-Float. (line 14)
* float directive, M680x0: M68K-Float. (line 11)
* float directive, M68HC11: M68HC11-Float. (line 11)
* float directive, TIC54X: TIC54X-Directives. (line 64)
* float directive, VAX: VAX-float. (line 15)
* float directive, x86-64: i386-Float. (line 14)
* floating point numbers: Flonums. (line 6)
* floating point numbers (double): Double. (line 6)
* floating point numbers (single) <1>: Single. (line 6)
* floating point numbers (single): Float. (line 6)
* floating point, Alpha (IEEE): Alpha Floating Point.
(line 6)
* floating point, ARC (IEEE): ARC Floating Point. (line 6)
* floating point, ARM (IEEE): ARM Floating Point. (line 6)
* floating point, D10V: D10V-Float. (line 6)
* floating point, D30V: D30V-Float. (line 6)
* floating point, ESA/390 (IEEE): ESA/390 Floating Point.
(line 6)
* floating point, H8/300 (IEEE): H8/300 Floating Point.
(line 6)
* floating point, HPPA (IEEE): HPPA Floating Point. (line 6)
* floating point, i386: i386-Float. (line 6)
* floating point, i960 (IEEE): Floating Point-i960. (line 6)
* floating point, M680x0: M68K-Float. (line 6)
* floating point, M68HC11: M68HC11-Float. (line 6)
* floating point, MSP 430 (IEEE): MSP430 Floating Point.
(line 6)
* floating point, SH (IEEE): SH Floating Point. (line 6)
* floating point, SPARC (IEEE): Sparc-Float. (line 6)
* floating point, V850 (IEEE): V850 Floating Point. (line 6)
* floating point, VAX: VAX-float. (line 6)
* floating point, x86-64: i386-Float. (line 6)
* floating point, Z80: Z80 Floating Point. (line 6)
* flonums: Flonums. (line 6)
* force_thumb directive, ARM: ARM Directives. (line 39)
* format of error messages: Errors. (line 24)
* format of warning messages: Errors. (line 12)
* formfeed (\f): Strings. (line 18)
* func directive: Func. (line 6)
* functions, in expressions: Operators. (line 6)
* gbr960, i960 postprocessor: Options-i960. (line 40)
* gfloat directive, VAX: VAX-directives. (line 18)
* global: Z8000 Directives. (line 21)
* global directive: Global. (line 6)
* global directive, TIC54X: TIC54X-Directives. (line 103)
* gp register, MIPS: MIPS Object. (line 11)
* gp register, V850: V850-Regs. (line 17)
* grouping data: Sub-Sections. (line 6)
* H8/300 addressing modes: H8/300-Addressing. (line 6)
* H8/300 floating point (IEEE): H8/300 Floating Point.
(line 6)
* H8/300 line comment character: H8/300-Chars. (line 6)
* H8/300 line separator: H8/300-Chars. (line 8)
* H8/300 machine directives (none): H8/300 Directives. (line 6)
* H8/300 opcode summary: H8/300 Opcodes. (line 6)
* H8/300 options (none): H8/300 Options. (line 6)
* H8/300 registers: H8/300-Regs. (line 6)
* H8/300 size suffixes: H8/300 Opcodes. (line 163)
* H8/300 support: H8/300-Dependent. (line 6)
* H8/300H, assembling for: H8/300 Directives. (line 8)
* half directive, ARC: ARC Directives. (line 156)
* half directive, SPARC: Sparc-Directives. (line 17)
* half directive, TIC54X: TIC54X-Directives. (line 111)
* hex character code (\XD...): Strings. (line 36)
* hexadecimal integers: Integers. (line 15)
* hexadecimal prefix, Z80: Z80-Chars. (line 8)
* hfloat directive, VAX: VAX-directives. (line 22)
* hi pseudo-op, V850: V850 Opcodes. (line 33)
* hi0 pseudo-op, V850: V850 Opcodes. (line 10)
* hidden directive: Hidden. (line 6)
* high directive, M32R: M32R-Directives. (line 18)
* hilo pseudo-op, V850: V850 Opcodes. (line 55)
* HPPA directives not supported: HPPA Directives. (line 11)
* HPPA floating point (IEEE): HPPA Floating Point. (line 6)
* HPPA Syntax: HPPA Options. (line 8)
* HPPA-only directives: HPPA Directives. (line 24)
* hword directive: hword. (line 6)
* i370 support: ESA/390-Dependent. (line 6)
* i386 16-bit code: i386-16bit. (line 6)
* i386 arch directive: i386-Arch. (line 6)
* i386 att_syntax pseudo op: i386-Syntax. (line 6)
* i386 conversion instructions: i386-Mnemonics. (line 32)
* i386 floating point: i386-Float. (line 6)
* i386 immediate operands: i386-Syntax. (line 15)
* i386 instruction naming: i386-Mnemonics. (line 6)
* i386 instruction prefixes: i386-Prefixes. (line 6)
* i386 intel_syntax pseudo op: i386-Syntax. (line 6)
* i386 jump optimization: i386-Jumps. (line 6)
* i386 jump, call, return: i386-Syntax. (line 38)
* i386 jump/call operands: i386-Syntax. (line 15)
* i386 memory references: i386-Memory. (line 6)
* i386 mul, imul instructions: i386-Notes. (line 6)
* i386 options: i386-Options. (line 6)
* i386 register operands: i386-Syntax. (line 15)
* i386 registers: i386-Regs. (line 6)
* i386 sections: i386-Syntax. (line 44)
* i386 size suffixes: i386-Syntax. (line 29)
* i386 source, destination operands: i386-Syntax. (line 22)
* i386 support: i386-Dependent. (line 6)
* i386 syntax compatibility: i386-Syntax. (line 6)
* i80306 support: i386-Dependent. (line 6)
* i860 machine directives: Directives-i860. (line 6)
* i860 opcodes: Opcodes for i860. (line 6)
* i860 support: i860-Dependent. (line 6)
* i960 architecture options: Options-i960. (line 6)
* i960 branch recording: Options-i960. (line 22)
* i960 callj pseudo-opcode: callj-i960. (line 6)
* i960 compare and jump expansions: Compare-and-branch-i960.
(line 13)
* i960 compare/branch instructions: Compare-and-branch-i960.
(line 6)
* i960 floating point (IEEE): Floating Point-i960. (line 6)
* i960 machine directives: Directives-i960. (line 6)
* i960 opcodes: Opcodes for i960. (line 6)
* i960 options: Options-i960. (line 6)
* i960 support: i960-Dependent. (line 6)
* IA-64 line comment character: IA-64-Chars. (line 6)
* IA-64 line separator: IA-64-Chars. (line 8)
* IA-64 options: IA-64 Options. (line 6)
* IA-64 Processor-status-Register bit names: IA-64-Bits. (line 6)
* IA-64 registers: IA-64-Regs. (line 6)
* IA-64 support: IA-64-Dependent. (line 6)
* IA-64 Syntax: IA-64 Options. (line 96)
* ident directive: Ident. (line 6)
* identifiers, ARM: ARM-Chars. (line 15)
* identifiers, MSP 430: MSP430-Chars. (line 8)
* if directive: If. (line 6)
* ifb directive: If. (line 21)
* ifc directive: If. (line 25)
* ifdef directive: If. (line 16)
* ifeq directive: If. (line 33)
* ifeqs directive: If. (line 36)
* ifge directive: If. (line 40)
* ifgt directive: If. (line 44)
* ifle directive: If. (line 48)
* iflt directive: If. (line 52)
* ifnb directive: If. (line 56)
* ifnc directive: If. (line 61)
* ifndef directive: If. (line 65)
* ifne directive: If. (line 72)
* ifnes directive: If. (line 76)
* ifnotdef directive: If. (line 65)
* immediate character, ARM: ARM-Chars. (line 13)
* immediate character, M680x0: M68K-Chars. (line 6)
* immediate character, VAX: VAX-operands. (line 6)
* immediate fields, relaxation: Xtensa Immediate Relaxation.
(line 6)
* immediate operands, i386: i386-Syntax. (line 15)
* immediate operands, x86-64: i386-Syntax. (line 15)
* imul instruction, i386: i386-Notes. (line 6)
* imul instruction, x86-64: i386-Notes. (line 6)
* incbin directive: Incbin. (line 6)
* include directive: Include. (line 6)
* include directive search path: I. (line 6)
* indirect character, VAX: VAX-operands. (line 9)
* infix operators: Infix Ops. (line 6)
* inhibiting interrupts, i386: i386-Prefixes. (line 36)
* input: Input Files. (line 6)
* input file linenumbers: Input Files. (line 35)
* instruction expansion, CRIS: CRIS-Expand. (line 6)
* instruction expansion, MMIX: MMIX-Expand. (line 6)
* instruction naming, i386: i386-Mnemonics. (line 6)
* instruction naming, x86-64: i386-Mnemonics. (line 6)
* instruction prefixes, i386: i386-Prefixes. (line 6)
* instruction set, M680x0: M68K-opcodes. (line 6)
* instruction set, M68HC11: M68HC11-opcodes. (line 6)
* instruction summary, D10V: D10V-Opcodes. (line 6)
* instruction summary, D30V: D30V-Opcodes. (line 6)
* instruction summary, H8/300: H8/300 Opcodes. (line 6)
* instruction summary, SH: SH Opcodes. (line 6)
* instruction summary, SH64: SH64 Opcodes. (line 6)
* instruction summary, Z8000: Z8000 Opcodes. (line 6)
* instructions and directives: Statements. (line 19)
* int directive: Int. (line 6)
* int directive, H8/300: H8/300 Directives. (line 6)
* int directive, i386: i386-Float. (line 21)
* int directive, TIC54X: TIC54X-Directives. (line 111)
* int directive, x86-64: i386-Float. (line 21)
* integer expressions: Integer Exprs. (line 6)
* integer, 16-byte: Octa. (line 6)
* integer, 8-byte: Quad. (line 9)
* integers: Integers. (line 6)
* integers, 16-bit: hword. (line 6)
* integers, 32-bit: Int. (line 6)
* integers, binary: Integers. (line 6)
* integers, decimal: Integers. (line 12)
* integers, hexadecimal: Integers. (line 15)
* integers, octal: Integers. (line 9)
* integers, one byte: Byte. (line 6)
* intel_syntax pseudo op, i386: i386-Syntax. (line 6)
* intel_syntax pseudo op, x86-64: i386-Syntax. (line 6)
* internal assembler sections: As Sections. (line 6)
* internal directive: Internal. (line 6)
* invalid input: Bug Criteria. (line 14)
* invocation summary: Overview. (line 6)
* IP2K architecture options: IP2K-Opts. (line 9)
* IP2K options: IP2K-Opts. (line 6)
* IP2K support: IP2K-Dependent. (line 6)
* irp directive: Irp. (line 6)
* irpc directive: Irpc. (line 6)
* ISA options, SH64: SH64 Options. (line 6)
* joining text and data sections: R. (line 6)
* jump instructions, i386: i386-Mnemonics. (line 51)
* jump instructions, x86-64: i386-Mnemonics. (line 51)
* jump optimization, i386: i386-Jumps. (line 6)
* jump optimization, x86-64: i386-Jumps. (line 6)
* jump/call operands, i386: i386-Syntax. (line 15)
* jump/call operands, x86-64: i386-Syntax. (line 15)
* L16SI instructions, relaxation: Xtensa Immediate Relaxation.
(line 23)
* L16UI instructions, relaxation: Xtensa Immediate Relaxation.
(line 23)
* L32I instructions, relaxation: Xtensa Immediate Relaxation.
(line 23)
* L8UI instructions, relaxation: Xtensa Immediate Relaxation.
(line 23)
* label (:): Statements. (line 30)
* label directive, TIC54X: TIC54X-Directives. (line 123)
* labels: Labels. (line 6)
* lcomm directive: Lcomm. (line 6)
* ld: Object. (line 15)
* ldouble directive M680x0: M68K-Float. (line 17)
* ldouble directive M68HC11: M68HC11-Float. (line 17)
* ldouble directive, TIC54X: TIC54X-Directives. (line 64)
* LDR reg,=<label> pseudo op, ARM: ARM Opcodes. (line 15)
* leafproc directive, i960: Directives-i960. (line 18)
* length directive, TIC54X: TIC54X-Directives. (line 127)
* length of symbols: Symbol Intro. (line 14)
* lflags directive (ignored): Lflags. (line 6)
* line comment character: Comments. (line 19)
* line comment character, Alpha: Alpha-Chars. (line 6)
* line comment character, ARM: ARM-Chars. (line 6)
* line comment character, D10V: D10V-Chars. (line 6)
* line comment character, D30V: D30V-Chars. (line 6)
* line comment character, H8/300: H8/300-Chars. (line 6)
* line comment character, IA-64: IA-64-Chars. (line 6)
* line comment character, M680x0: M68K-Chars. (line 6)
* line comment character, MSP 430: MSP430-Chars. (line 6)
* line comment character, SH: SH-Chars. (line 6)
* line comment character, SH64: SH64-Chars. (line 6)
* line comment character, V850: V850-Chars. (line 6)
* line comment character, Z80: Z80-Chars. (line 6)
* line comment character, Z8000: Z8000-Chars. (line 6)
* line comment characters, CRIS: CRIS-Chars. (line 6)
* line comment characters, MMIX: MMIX-Chars. (line 6)
* line directive: Line. (line 6)
* line directive, MSP 430: MSP430 Directives. (line 14)
* line numbers, in input files: Input Files. (line 35)
* line numbers, in warnings/errors: Errors. (line 16)
* line separator character: Statements. (line 6)
* line separator, Alpha: Alpha-Chars. (line 8)
* line separator, ARM: ARM-Chars. (line 10)
* line separator, H8/300: H8/300-Chars. (line 8)
* line separator, IA-64: IA-64-Chars. (line 8)
* line separator, SH: SH-Chars. (line 8)
* line separator, SH64: SH64-Chars. (line 8)
* line separator, Z8000: Z8000-Chars. (line 8)
* lines starting with #: Comments. (line 38)
* linker: Object. (line 15)
* linker, and assembler: Secs Background. (line 10)
* linkonce directive: Linkonce. (line 6)
* list directive: List. (line 6)
* list directive, TIC54X: TIC54X-Directives. (line 131)
* listing control, turning off: Nolist. (line 6)
* listing control, turning on: List. (line 6)
* listing control: new page: Eject. (line 6)
* listing control: paper size: Psize. (line 6)
* listing control: subtitle: Sbttl. (line 6)
* listing control: title line: Title. (line 6)
* listings, enabling: a. (line 6)
* literal directive: Literal Directive. (line 6)
* literal_position directive: Literal Position Directive.
(line 6)
* literal_prefix directive: Literal Prefix Directive.
(line 6)
* little endian output, MIPS: Overview. (line 609)
* little endian output, PJ: Overview. (line 516)
* little-endian output, MIPS: MIPS Opts. (line 13)
* ln directive: Ln. (line 6)
* lo pseudo-op, V850: V850 Opcodes. (line 22)
* loc directive: LNS directives. (line 19)
* loc_mark_blocks directive: LNS directives. (line 50)
* local common symbols: Lcomm. (line 6)
* local labels, retaining in output: L. (line 6)
* local symbol names: Symbol Names. (line 22)
* location counter: Dot. (line 6)
* location counter, advancing: Org. (line 6)
* location counter, Z80: Z80-Chars. (line 8)
* logical file name: File. (line 6)
* logical line number: Line. (line 6)
* logical line numbers: Comments. (line 38)
* long directive: Long. (line 6)
* long directive, ARC: ARC Directives. (line 159)
* long directive, i386: i386-Float. (line 21)
* long directive, TIC54X: TIC54X-Directives. (line 135)
* long directive, x86-64: i386-Float. (line 21)
* longcall pseudo-op, V850: V850 Opcodes. (line 123)
* longcalls directive: Longcalls Directive. (line 6)
* longjump pseudo-op, V850: V850 Opcodes. (line 129)
* loop directive, TIC54X: TIC54X-Directives. (line 143)
* LOOP instructions, alignment: Xtensa Automatic Alignment.
(line 6)
* low directive, M32R: M32R-Directives. (line 9)
* lp register, V850: V850-Regs. (line 98)
* lval: Z8000 Directives. (line 27)
* M16C architecture option: M32C-Opts. (line 12)
* M32C architecture option: M32C-Opts. (line 9)
* M32C modifiers: M32C-Modifiers. (line 6)
* M32C options: M32C-Opts. (line 6)
* M32C support: M32C-Dependent. (line 6)
* M32R architecture options: M32R-Opts. (line 9)
* M32R directives: M32R-Directives. (line 6)
* M32R options: M32R-Opts. (line 6)
* M32R support: M32R-Dependent. (line 6)
* M32R warnings: M32R-Warnings. (line 6)
* M680x0 addressing modes: M68K-Syntax. (line 21)
* M680x0 architecture options: M68K-Opts. (line 103)
* M680x0 branch improvement: M68K-Branch. (line 6)
* M680x0 directives: M68K-Directives. (line 6)
* M680x0 floating point: M68K-Float. (line 6)
* M680x0 immediate character: M68K-Chars. (line 6)
* M680x0 line comment character: M68K-Chars. (line 6)
* M680x0 opcodes: M68K-opcodes. (line 6)
* M680x0 options: M68K-Opts. (line 6)
* M680x0 pseudo-opcodes: M68K-Branch. (line 6)
* M680x0 size modifiers: M68K-Syntax. (line 8)
* M680x0 support: M68K-Dependent. (line 6)
* M680x0 syntax: M68K-Syntax. (line 8)
* M68HC11 addressing modes: M68HC11-Syntax. (line 17)
* M68HC11 and M68HC12 support: M68HC11-Dependent. (line 6)
* M68HC11 assembler directive .far: M68HC11-Directives. (line 20)
* M68HC11 assembler directive .interrupt: M68HC11-Directives. (line 26)
* M68HC11 assembler directive .mode: M68HC11-Directives. (line 16)
* M68HC11 assembler directive .relax: M68HC11-Directives. (line 10)
* M68HC11 assembler directive .xrefb: M68HC11-Directives. (line 31)
* M68HC11 assembler directives: M68HC11-Directives. (line 6)
* M68HC11 branch improvement: M68HC11-Branch. (line 6)
* M68HC11 floating point: M68HC11-Float. (line 6)
* M68HC11 modifiers: M68HC11-Modifiers. (line 6)
* M68HC11 opcodes: M68HC11-opcodes. (line 6)
* M68HC11 options: M68HC11-Opts. (line 6)
* M68HC11 pseudo-opcodes: M68HC11-Branch. (line 6)
* M68HC11 syntax: M68HC11-Syntax. (line 6)
* M68HC12 assembler directives: M68HC11-Directives. (line 6)
* machine dependencies: Machine Dependencies.
(line 6)
* machine directives, ARC: ARC Directives. (line 6)
* machine directives, ARM: ARM Directives. (line 6)
* machine directives, H8/300 (none): H8/300 Directives. (line 6)
* machine directives, i860: Directives-i860. (line 6)
* machine directives, i960: Directives-i960. (line 6)
* machine directives, MSP 430: MSP430 Directives. (line 6)
* machine directives, SH: SH Directives. (line 6)
* machine directives, SH64: SH64 Directives. (line 9)
* machine directives, SPARC: Sparc-Directives. (line 6)
* machine directives, TIC54X: TIC54X-Directives. (line 6)
* machine directives, V850: V850 Directives. (line 6)
* machine directives, VAX: VAX-directives. (line 6)
* machine independent directives: Pseudo Ops. (line 6)
* machine instructions (not covered): Manual. (line 14)
* machine-independent syntax: Syntax. (line 6)
* macro directive: Macro. (line 28)
* macro directive, TIC54X: TIC54X-Directives. (line 153)
* macros: Macro. (line 6)
* macros, count executed: Macro. (line 101)
* Macros, MSP 430: MSP430-Macros. (line 6)
* macros, TIC54X: TIC54X-Macros. (line 6)
* make rules: MD. (line 6)
* manual, structure and purpose: Manual. (line 6)
* math builtins, TIC54X: TIC54X-Builtins. (line 6)
* Maximum number of continuation lines: listing. (line 33)
* memory references, i386: i386-Memory. (line 6)
* memory references, x86-64: i386-Memory. (line 6)
* memory-mapped registers, TIC54X: TIC54X-MMRegs. (line 6)
* merging text and data sections: R. (line 6)
* messages from assembler: Errors. (line 6)
* minus, permitted arguments: Infix Ops. (line 49)
* MIPS architecture options: MIPS Opts. (line 20)
* MIPS big-endian output: MIPS Opts. (line 13)
* MIPS debugging directives: MIPS Stabs. (line 6)
* MIPS DSP instruction generation override: MIPS ASE instruction generation overrides.
(line 16)
* MIPS ECOFF sections: MIPS Object. (line 6)
* MIPS endianness: Overview. (line 606)
* MIPS ISA: Overview. (line 612)
* MIPS ISA override: MIPS ISA. (line 6)
* MIPS little-endian output: MIPS Opts. (line 13)
* MIPS MDMX instruction generation override: MIPS ASE instruction generation overrides.
(line 11)
* MIPS MIPS-3D instruction generation override: MIPS ASE instruction generation overrides.
(line 6)
* MIPS MT instruction generation override: MIPS ASE instruction generation overrides.
(line 21)
* MIPS option stack: MIPS option stack. (line 6)
* MIPS processor: MIPS-Dependent. (line 6)
* MIT: M68K-Syntax. (line 6)
* mlib directive, TIC54X: TIC54X-Directives. (line 159)
* mlist directive, TIC54X: TIC54X-Directives. (line 164)
* MMIX assembler directive BSPEC: MMIX-Pseudos. (line 131)
* MMIX assembler directive BYTE: MMIX-Pseudos. (line 97)
* MMIX assembler directive ESPEC: MMIX-Pseudos. (line 131)
* MMIX assembler directive GREG: MMIX-Pseudos. (line 50)
* MMIX assembler directive IS: MMIX-Pseudos. (line 42)
* MMIX assembler directive LOC: MMIX-Pseudos. (line 7)
* MMIX assembler directive LOCAL: MMIX-Pseudos. (line 28)
* MMIX assembler directive OCTA: MMIX-Pseudos. (line 108)
* MMIX assembler directive PREFIX: MMIX-Pseudos. (line 120)
* MMIX assembler directive TETRA: MMIX-Pseudos. (line 108)
* MMIX assembler directive WYDE: MMIX-Pseudos. (line 108)
* MMIX assembler directives: MMIX-Pseudos. (line 6)
* MMIX line comment characters: MMIX-Chars. (line 6)
* MMIX options: MMIX-Opts. (line 6)
* MMIX pseudo-op BSPEC: MMIX-Pseudos. (line 131)
* MMIX pseudo-op BYTE: MMIX-Pseudos. (line 97)
* MMIX pseudo-op ESPEC: MMIX-Pseudos. (line 131)
* MMIX pseudo-op GREG: MMIX-Pseudos. (line 50)
* MMIX pseudo-op IS: MMIX-Pseudos. (line 42)
* MMIX pseudo-op LOC: MMIX-Pseudos. (line 7)
* MMIX pseudo-op LOCAL: MMIX-Pseudos. (line 28)
* MMIX pseudo-op OCTA: MMIX-Pseudos. (line 108)
* MMIX pseudo-op PREFIX: MMIX-Pseudos. (line 120)
* MMIX pseudo-op TETRA: MMIX-Pseudos. (line 108)
* MMIX pseudo-op WYDE: MMIX-Pseudos. (line 108)
* MMIX pseudo-ops: MMIX-Pseudos. (line 6)
* MMIX register names: MMIX-Regs. (line 6)
* MMIX support: MMIX-Dependent. (line 6)
* mmixal differences: MMIX-mmixal. (line 6)
* mmregs directive, TIC54X: TIC54X-Directives. (line 170)
* mmsg directive, TIC54X: TIC54X-Directives. (line 77)
* MMX, i386: i386-SIMD. (line 6)
* MMX, x86-64: i386-SIMD. (line 6)
* mnemonic suffixes, i386: i386-Syntax. (line 29)
* mnemonic suffixes, x86-64: i386-Syntax. (line 29)
* mnemonics for opcodes, VAX: VAX-opcodes. (line 6)
* mnemonics, D10V: D10V-Opcodes. (line 6)
* mnemonics, D30V: D30V-Opcodes. (line 6)
* mnemonics, H8/300: H8/300 Opcodes. (line 6)
* mnemonics, SH: SH Opcodes. (line 6)
* mnemonics, SH64: SH64 Opcodes. (line 6)
* mnemonics, Z8000: Z8000 Opcodes. (line 6)
* mnolist directive, TIC54X: TIC54X-Directives. (line 164)
* Motorola syntax for the 680x0: M68K-Moto-Syntax. (line 6)
* MOVI instructions, relaxation: Xtensa Immediate Relaxation.
(line 12)
* MRI compatibility mode: M. (line 6)
* mri directive: MRI. (line 6)
* MRI mode, temporarily: MRI. (line 6)
* MSP 430 floating point (IEEE): MSP430 Floating Point.
(line 6)
* MSP 430 identifiers: MSP430-Chars. (line 8)
* MSP 430 line comment character: MSP430-Chars. (line 6)
* MSP 430 machine directives: MSP430 Directives. (line 6)
* MSP 430 macros: MSP430-Macros. (line 6)
* MSP 430 opcodes: MSP430 Opcodes. (line 6)
* MSP 430 options (none): MSP430 Options. (line 6)
* MSP 430 profiling capability: MSP430 Profiling Capability.
(line 6)
* MSP 430 register names: MSP430-Regs. (line 6)
* MSP 430 support: MSP430-Dependent. (line 6)
* MSP430 Assembler Extensions: MSP430-Ext. (line 6)
* mul instruction, i386: i386-Notes. (line 6)
* mul instruction, x86-64: i386-Notes. (line 6)
* name: Z8000 Directives. (line 18)
* named section: Section. (line 6)
* named sections: Ld Sections. (line 8)
* names, symbol: Symbol Names. (line 6)
* naming object file: o. (line 6)
* new page, in listings: Eject. (line 6)
* newblock directive, TIC54X: TIC54X-Directives. (line 176)
* newline (\n): Strings. (line 21)
* newline, required at file end: Statements. (line 13)
* no-absolute-literals directive: Absolute Literals Directive.
(line 6)
* no-longcalls directive: Longcalls Directive. (line 6)
* no-schedule directive: Schedule Directive. (line 6)
* no-transform directive: Transform Directive. (line 6)
* nolist directive: Nolist. (line 6)
* nolist directive, TIC54X: TIC54X-Directives. (line 131)
* NOP pseudo op, ARM: ARM Opcodes. (line 9)
* notes for Alpha: Alpha Notes. (line 6)
* null-terminated strings: Asciz. (line 6)
* number constants: Numbers. (line 6)
* number of macros executed: Macro. (line 101)
* numbered subsections: Sub-Sections. (line 6)
* numbers, 16-bit: hword. (line 6)
* numeric values: Expressions. (line 6)
* nword directive, SPARC: Sparc-Directives. (line 20)
* object file: Object. (line 6)
* object file format: Object Formats. (line 6)
* object file name: o. (line 6)
* object file, after errors: Z. (line 6)
* obsolescent directives: Deprecated. (line 6)
* octa directive: Octa. (line 6)
* octal character code (\DDD): Strings. (line 30)
* octal integers: Integers. (line 9)
* offset directive, V850: V850 Directives. (line 6)
* opcode mnemonics, VAX: VAX-opcodes. (line 6)
* opcode names, Xtensa: Xtensa Opcodes. (line 6)
* opcode summary, D10V: D10V-Opcodes. (line 6)
* opcode summary, D30V: D30V-Opcodes. (line 6)
* opcode summary, H8/300: H8/300 Opcodes. (line 6)
* opcode summary, SH: SH Opcodes. (line 6)
* opcode summary, SH64: SH64 Opcodes. (line 6)
* opcode summary, Z8000: Z8000 Opcodes. (line 6)
* opcodes for ARC: ARC Opcodes. (line 6)
* opcodes for ARM: ARM Opcodes. (line 6)
* opcodes for MSP 430: MSP430 Opcodes. (line 6)
* opcodes for V850: V850 Opcodes. (line 6)
* opcodes, i860: Opcodes for i860. (line 6)
* opcodes, i960: Opcodes for i960. (line 6)
* opcodes, M680x0: M68K-opcodes. (line 6)
* opcodes, M68HC11: M68HC11-opcodes. (line 6)
* operand delimiters, i386: i386-Syntax. (line 15)
* operand delimiters, x86-64: i386-Syntax. (line 15)
* operand notation, VAX: VAX-operands. (line 6)
* operands in expressions: Arguments. (line 6)
* operator precedence: Infix Ops. (line 11)
* operators, in expressions: Operators. (line 6)
* operators, permitted arguments: Infix Ops. (line 6)
* optimization, D10V: Overview. (line 391)
* optimization, D30V: Overview. (line 396)
* optimizations: Xtensa Optimizations.
(line 6)
* option directive, ARC: ARC Directives. (line 162)
* option directive, TIC54X: TIC54X-Directives. (line 180)
* option summary: Overview. (line 6)
* options for Alpha: Alpha Options. (line 6)
* options for ARC (none): ARC Options. (line 6)
* options for ARM (none): ARM Options. (line 6)
* options for i386: i386-Options. (line 6)
* options for IA-64: IA-64 Options. (line 6)
* options for MSP430 (none): MSP430 Options. (line 6)
* options for PDP-11: PDP-11-Options. (line 6)
* options for PowerPC: PowerPC-Opts. (line 6)
* options for SPARC: Sparc-Opts. (line 6)
* options for V850 (none): V850 Options. (line 6)
* options for VAX/VMS: VAX-Opts. (line 42)
* options for x86-64: i386-Options. (line 6)
* options for Z80: Z80 Options. (line 6)
* options, all versions of assembler: Invoking. (line 6)
* options, command line: Command Line. (line 13)
* options, CRIS: CRIS-Opts. (line 6)
* options, D10V: D10V-Opts. (line 6)
* options, D30V: D30V-Opts. (line 6)
* options, H8/300 (none): H8/300 Options. (line 6)
* options, i960: Options-i960. (line 6)
* options, IP2K: IP2K-Opts. (line 6)
* options, M32C: M32C-Opts. (line 6)
* options, M32R: M32R-Opts. (line 6)
* options, M680x0: M68K-Opts. (line 6)
* options, M68HC11: M68HC11-Opts. (line 6)
* options, MMIX: MMIX-Opts. (line 6)
* options, PJ: PJ Options. (line 6)
* options, SH: SH Options. (line 6)
* options, SH64: SH64 Options. (line 6)
* options, TIC54X: TIC54X-Opts. (line 6)
* options, Z8000: Z8000 Options. (line 6)
* org directive: Org. (line 6)
* other attribute, of a.out symbol: Symbol Other. (line 6)
* output file: Object. (line 6)
* p2align directive: P2align. (line 6)
* p2alignl directive: P2align. (line 28)
* p2alignw directive: P2align. (line 28)
* padding the location counter: Align. (line 6)
* padding the location counter given a power of two: P2align. (line 6)
* padding the location counter given number of bytes: Balign. (line 6)
* page, in listings: Eject. (line 6)
* paper size, for listings: Psize. (line 6)
* paths for .include: I. (line 6)
* patterns, writing in memory: Fill. (line 6)
* PDP-11 comments: PDP-11-Syntax. (line 16)
* PDP-11 floating-point register syntax: PDP-11-Syntax. (line 13)
* PDP-11 general-purpose register syntax: PDP-11-Syntax. (line 10)
* PDP-11 instruction naming: PDP-11-Mnemonics. (line 6)
* PDP-11 support: PDP-11-Dependent. (line 6)
* PDP-11 syntax: PDP-11-Syntax. (line 6)
* PIC code generation for ARM: ARM Options. (line 120)
* PIC code generation for M32R: M32R-Opts. (line 42)
* PJ endianness: Overview. (line 513)
* PJ options: PJ Options. (line 6)
* PJ support: PJ-Dependent. (line 6)
* plus, permitted arguments: Infix Ops. (line 44)
* popsection directive: PopSection. (line 6)
* Position-independent code, CRIS: CRIS-Opts. (line 27)
* Position-independent code, symbols in, CRIS: CRIS-Pic. (line 6)
* PowerPC architectures: PowerPC-Opts. (line 6)
* PowerPC directives: PowerPC-Pseudo. (line 6)
* PowerPC options: PowerPC-Opts. (line 6)
* PowerPC support: PPC-Dependent. (line 6)
* precedence of operators: Infix Ops. (line 11)
* precision, floating point: Flonums. (line 6)
* prefix operators: Prefix Ops. (line 6)
* prefixes, i386: i386-Prefixes. (line 6)
* preprocessing: Preprocessing. (line 6)
* preprocessing, turning on and off: Preprocessing. (line 27)
* previous directive: Previous. (line 6)
* primary attributes, COFF symbols: COFF Symbols. (line 13)
* print directive: Print. (line 6)
* proc directive, SPARC: Sparc-Directives. (line 25)
* profiler directive, MSP 430: MSP430 Directives. (line 22)
* profiling capability for MSP 430: MSP430 Profiling Capability.
(line 6)
* protected directive: Protected. (line 6)
* pseudo-op .arch, CRIS: CRIS-Pseudos. (line 45)
* pseudo-op .dword, CRIS: CRIS-Pseudos. (line 12)
* pseudo-op .syntax, CRIS: CRIS-Pseudos. (line 17)
* pseudo-op BSPEC, MMIX: MMIX-Pseudos. (line 131)
* pseudo-op BYTE, MMIX: MMIX-Pseudos. (line 97)
* pseudo-op ESPEC, MMIX: MMIX-Pseudos. (line 131)
* pseudo-op GREG, MMIX: MMIX-Pseudos. (line 50)
* pseudo-op IS, MMIX: MMIX-Pseudos. (line 42)
* pseudo-op LOC, MMIX: MMIX-Pseudos. (line 7)
* pseudo-op LOCAL, MMIX: MMIX-Pseudos. (line 28)
* pseudo-op OCTA, MMIX: MMIX-Pseudos. (line 108)
* pseudo-op PREFIX, MMIX: MMIX-Pseudos. (line 120)
* pseudo-op TETRA, MMIX: MMIX-Pseudos. (line 108)
* pseudo-op WYDE, MMIX: MMIX-Pseudos. (line 108)
* pseudo-opcodes, M680x0: M68K-Branch. (line 6)
* pseudo-opcodes, M68HC11: M68HC11-Branch. (line 6)
* pseudo-ops for branch, VAX: VAX-branch. (line 6)
* pseudo-ops, CRIS: CRIS-Pseudos. (line 6)
* pseudo-ops, machine independent: Pseudo Ops. (line 6)
* pseudo-ops, MMIX: MMIX-Pseudos. (line 6)
* psize directive: Psize. (line 6)
* PSR bits: IA-64-Bits. (line 6)
* pstring directive, TIC54X: TIC54X-Directives. (line 209)
* psw register, V850: V850-Regs. (line 116)
* purgem directive: Purgem. (line 6)
* purpose of GNU assembler: GNU Assembler. (line 12)
* pushsection directive: PushSection. (line 6)
* quad directive: Quad. (line 6)
* quad directive, i386: i386-Float. (line 21)
* quad directive, x86-64: i386-Float. (line 21)
* real-mode code, i386: i386-16bit. (line 6)
* ref directive, TIC54X: TIC54X-Directives. (line 103)
* register directive, SPARC: Sparc-Directives. (line 29)
* register names, Alpha: Alpha-Regs. (line 6)
* register names, ARC: ARC-Regs. (line 6)
* register names, ARM: ARM-Regs. (line 6)
* register names, CRIS: CRIS-Regs. (line 6)
* register names, H8/300: H8/300-Regs. (line 6)
* register names, IA-64: IA-64-Regs. (line 6)
* register names, MMIX: MMIX-Regs. (line 6)
* register names, MSP 430: MSP430-Regs. (line 6)
* register names, V850: V850-Regs. (line 6)
* register names, VAX: VAX-operands. (line 17)
* register names, Xtensa: Xtensa Registers. (line 6)
* register names, Z80: Z80-Regs. (line 6)
* register operands, i386: i386-Syntax. (line 15)
* register operands, x86-64: i386-Syntax. (line 15)
* registers, D10V: D10V-Regs. (line 6)
* registers, D30V: D30V-Regs. (line 6)
* registers, i386: i386-Regs. (line 6)
* registers, SH: SH-Regs. (line 6)
* registers, SH64: SH64-Regs. (line 6)
* registers, TIC54X memory-mapped: TIC54X-MMRegs. (line 6)
* registers, x86-64: i386-Regs. (line 6)
* registers, Z8000: Z8000-Regs. (line 6)
* relaxation: Xtensa Relaxation. (line 6)
* relaxation of ADDI instructions: Xtensa Immediate Relaxation.
(line 43)
* relaxation of branch instructions: Xtensa Branch Relaxation.
(line 6)
* relaxation of call instructions: Xtensa Call Relaxation.
(line 6)
* relaxation of immediate fields: Xtensa Immediate Relaxation.
(line 6)
* relaxation of L16SI instructions: Xtensa Immediate Relaxation.
(line 23)
* relaxation of L16UI instructions: Xtensa Immediate Relaxation.
(line 23)
* relaxation of L32I instructions: Xtensa Immediate Relaxation.
(line 23)
* relaxation of L8UI instructions: Xtensa Immediate Relaxation.
(line 23)
* relaxation of MOVI instructions: Xtensa Immediate Relaxation.
(line 12)
* relocation: Sections. (line 6)
* relocation example: Ld Sections. (line 40)
* relocations, Alpha: Alpha-Relocs. (line 6)
* repeat prefixes, i386: i386-Prefixes. (line 44)
* reporting bugs in assembler: Reporting Bugs. (line 6)
* rept directive: Rept. (line 6)
* req directive, ARM: ARM Directives. (line 13)
* reserve directive, SPARC: Sparc-Directives. (line 39)
* return instructions, i386: i386-Syntax. (line 38)
* return instructions, x86-64: i386-Syntax. (line 38)
* REX prefixes, i386: i386-Prefixes. (line 46)
* rsect: Z8000 Directives. (line 52)
* sblock directive, TIC54X: TIC54X-Directives. (line 183)
* sbttl directive: Sbttl. (line 6)
* schedule directive: Schedule Directive. (line 6)
* scl directive: Scl. (line 6)
* sdaoff pseudo-op, V850: V850 Opcodes. (line 65)
* search path for .include: I. (line 6)
* sect directive, MSP 430: MSP430 Directives. (line 18)
* sect directive, TIC54X: TIC54X-Directives. (line 189)
* section directive (COFF version): Section. (line 16)
* section directive (ELF version): Section. (line 67)
* section directive, V850: V850 Directives. (line 9)
* section override prefixes, i386: i386-Prefixes. (line 23)
* Section Stack <1>: SubSection. (line 6)
* Section Stack <2>: Section. (line 62)
* Section Stack <3>: PushSection. (line 6)
* Section Stack <4>: PopSection. (line 6)
* Section Stack: Previous. (line 6)
* section-relative addressing: Secs Background. (line 68)
* sections: Sections. (line 6)
* sections in messages, internal: As Sections. (line 6)
* sections, i386: i386-Syntax. (line 44)
* sections, named: Ld Sections. (line 8)
* sections, x86-64: i386-Syntax. (line 44)
* seg directive, SPARC: Sparc-Directives. (line 44)
* segm: Z8000 Directives. (line 10)
* set directive: Set. (line 6)
* set directive, TIC54X: TIC54X-Directives. (line 192)
* SH addressing modes: SH-Addressing. (line 6)
* SH floating point (IEEE): SH Floating Point. (line 6)
* SH line comment character: SH-Chars. (line 6)
* SH line separator: SH-Chars. (line 8)
* SH machine directives: SH Directives. (line 6)
* SH opcode summary: SH Opcodes. (line 6)
* SH options: SH Options. (line 6)
* SH registers: SH-Regs. (line 6)
* SH support: SH-Dependent. (line 6)
* SH64 ABI options: SH64 Options. (line 29)
* SH64 addressing modes: SH64-Addressing. (line 6)
* SH64 ISA options: SH64 Options. (line 6)
* SH64 line comment character: SH64-Chars. (line 6)
* SH64 line separator: SH64-Chars. (line 8)
* SH64 machine directives: SH64 Directives. (line 9)
* SH64 opcode summary: SH64 Opcodes. (line 6)
* SH64 options: SH64 Options. (line 6)
* SH64 registers: SH64-Regs. (line 6)
* SH64 support: SH64-Dependent. (line 6)
* shigh directive, M32R: M32R-Directives. (line 26)
* short directive: Short. (line 6)
* short directive, ARC: ARC Directives. (line 171)
* short directive, TIC54X: TIC54X-Directives. (line 111)
* SIMD, i386: i386-SIMD. (line 6)
* SIMD, x86-64: i386-SIMD. (line 6)
* single character constant: Chars. (line 6)
* single directive: Single. (line 6)
* single directive, i386: i386-Float. (line 14)
* single directive, x86-64: i386-Float. (line 14)
* single quote, Z80: Z80-Chars. (line 13)
* sixteen bit integers: hword. (line 6)
* sixteen byte integer: Octa. (line 6)
* size directive (COFF version): Size. (line 11)
* size directive (ELF version): Size. (line 19)
* size modifiers, D10V: D10V-Size. (line 6)
* size modifiers, D30V: D30V-Size. (line 6)
* size modifiers, M680x0: M68K-Syntax. (line 8)
* size prefixes, i386: i386-Prefixes. (line 27)
* size suffixes, H8/300: H8/300 Opcodes. (line 163)
* sizes operands, i386: i386-Syntax. (line 29)
* sizes operands, x86-64: i386-Syntax. (line 29)
* skip directive: Skip. (line 6)
* skip directive, M680x0: M68K-Directives. (line 19)
* skip directive, SPARC: Sparc-Directives. (line 48)
* sleb128 directive: Sleb128. (line 6)
* small objects, MIPS ECOFF: MIPS Object. (line 11)
* SOM symbol attributes: SOM Symbols. (line 6)
* source program: Input Files. (line 6)
* source, destination operands; i386: i386-Syntax. (line 22)
* source, destination operands; x86-64: i386-Syntax. (line 22)
* sp register: Xtensa Registers. (line 6)
* sp register, V850: V850-Regs. (line 14)
* space directive: Space. (line 6)
* space directive, TIC54X: TIC54X-Directives. (line 197)
* space used, maximum for assembly: statistics. (line 6)
* SPARC architectures: Sparc-Opts. (line 6)
* SPARC data alignment: Sparc-Aligned-Data. (line 6)
* SPARC floating point (IEEE): Sparc-Float. (line 6)
* SPARC machine directives: Sparc-Directives. (line 6)
* SPARC options: Sparc-Opts. (line 6)
* SPARC support: Sparc-Dependent. (line 6)
* special characters, ARC: ARC-Chars. (line 6)
* special characters, M680x0: M68K-Chars. (line 6)
* special purpose registers, MSP 430: MSP430-Regs. (line 11)
* sslist directive, TIC54X: TIC54X-Directives. (line 204)
* ssnolist directive, TIC54X: TIC54X-Directives. (line 204)
* stabd directive: Stab. (line 38)
* stabn directive: Stab. (line 48)
* stabs directive: Stab. (line 51)
* stabX directives: Stab. (line 6)
* standard assembler sections: Secs Background. (line 27)
* standard input, as input file: Command Line. (line 10)
* statement separator character: Statements. (line 6)
* statement separator, Alpha: Alpha-Chars. (line 8)
* statement separator, ARM: ARM-Chars. (line 10)
* statement separator, H8/300: H8/300-Chars. (line 8)
* statement separator, IA-64: IA-64-Chars. (line 8)
* statement separator, SH: SH-Chars. (line 8)
* statement separator, SH64: SH64-Chars. (line 8)
* statement separator, Z8000: Z8000-Chars. (line 8)
* statements, structure of: Statements. (line 6)
* statistics, about assembly: statistics. (line 6)
* stopping the assembly: Abort. (line 6)
* string constants: Strings. (line 6)
* string directive: String. (line 6)
* string directive on HPPA: HPPA Directives. (line 137)
* string directive, TIC54X: TIC54X-Directives. (line 209)
* string literals: Ascii. (line 6)
* string, copying to object file: String. (line 6)
* struct directive: Struct. (line 6)
* struct directive, TIC54X: TIC54X-Directives. (line 217)
* structure debugging, COFF: Tag. (line 6)
* sub-instruction ordering, D10V: D10V-Chars. (line 6)
* sub-instruction ordering, D30V: D30V-Chars. (line 6)
* sub-instructions, D10V: D10V-Subs. (line 6)
* sub-instructions, D30V: D30V-Subs. (line 6)
* subexpressions: Arguments. (line 24)
* subsection directive: SubSection. (line 6)
* subsym builtins, TIC54X: TIC54X-Macros. (line 16)
* subtitles for listings: Sbttl. (line 6)
* subtraction, permitted arguments: Infix Ops. (line 49)
* summary of options: Overview. (line 6)
* support: HPPA-Dependent. (line 6)
* supporting files, including: Include. (line 6)
* suppressing warnings: W. (line 11)
* sval: Z8000 Directives. (line 33)
* symbol attributes: Symbol Attributes. (line 6)
* symbol attributes, a.out: a.out Symbols. (line 6)
* symbol attributes, COFF: COFF Symbols. (line 6)
* symbol attributes, SOM: SOM Symbols. (line 6)
* symbol descriptor, COFF: Desc. (line 6)
* symbol modifiers <1>: M68HC11-Modifiers. (line 12)
* symbol modifiers: M32C-Modifiers. (line 11)
* symbol names: Symbol Names. (line 6)
* symbol names, $ in <1>: SH64-Chars. (line 10)
* symbol names, $ in <2>: SH-Chars. (line 10)
* symbol names, $ in <3>: D30V-Chars. (line 63)
* symbol names, $ in: D10V-Chars. (line 46)
* symbol names, local: Symbol Names. (line 22)
* symbol names, temporary: Symbol Names. (line 22)
* symbol storage class (COFF): Scl. (line 6)
* symbol type: Symbol Type. (line 6)
* symbol type, COFF: Type. (line 11)
* symbol type, ELF: Type. (line 22)
* symbol value: Symbol Value. (line 6)
* symbol value, setting: Set. (line 6)
* symbol values, assigning: Setting Symbols. (line 6)
* symbol versioning: Symver. (line 6)
* symbol, common: Comm. (line 6)
* symbol, making visible to linker: Global. (line 6)
* symbolic debuggers, information for: Stab. (line 6)
* symbols: Symbols. (line 6)
* Symbols in position-independent code, CRIS: CRIS-Pic. (line 6)
* symbols with uppercase, VAX/VMS: VAX-Opts. (line 42)
* symbols, assigning values to: Equ. (line 6)
* Symbols, built-in, CRIS: CRIS-Symbols. (line 6)
* Symbols, CRIS, built-in: CRIS-Symbols. (line 6)
* symbols, local common: Lcomm. (line 6)
* symver directive: Symver. (line 6)
* syntax compatibility, i386: i386-Syntax. (line 6)
* syntax compatibility, x86-64: i386-Syntax. (line 6)
* syntax, BFIN: BFIN Syntax. (line 6)
* syntax, D10V: D10V-Syntax. (line 6)
* syntax, D30V: D30V-Syntax. (line 6)
* syntax, M32C: M32C-Modifiers. (line 6)
* syntax, M680x0: M68K-Syntax. (line 8)
* syntax, M68HC11 <1>: M68HC11-Modifiers. (line 6)
* syntax, M68HC11: M68HC11-Syntax. (line 6)
* syntax, machine-independent: Syntax. (line 6)
* syntax, Xtensa assembler: Xtensa Syntax. (line 6)
* sysproc directive, i960: Directives-i960. (line 37)
* tab (\t): Strings. (line 27)
* tab directive, TIC54X: TIC54X-Directives. (line 248)
* tag directive: Tag. (line 6)
* tag directive, TIC54X: TIC54X-Directives. (line 217)
* tdaoff pseudo-op, V850: V850 Opcodes. (line 81)
* temporary symbol names: Symbol Names. (line 22)
* text and data sections, joining: R. (line 6)
* text directive: Text. (line 6)
* text section: Ld Sections. (line 9)
* tfloat directive, i386: i386-Float. (line 14)
* tfloat directive, x86-64: i386-Float. (line 14)
* thumb directive, ARM: ARM Directives. (line 33)
* Thumb support: ARM-Dependent. (line 6)
* thumb_func directive, ARM: ARM Directives. (line 43)
* thumb_set directive, ARM: ARM Directives. (line 51)
* TIC54X builtin math functions: TIC54X-Builtins. (line 6)
* TIC54X machine directives: TIC54X-Directives. (line 6)
* TIC54X memory-mapped registers: TIC54X-MMRegs. (line 6)
* TIC54X options: TIC54X-Opts. (line 6)
* TIC54X subsym builtins: TIC54X-Macros. (line 16)
* TIC54X support: TIC54X-Dependent. (line 6)
* TIC54X-specific macros: TIC54X-Macros. (line 6)
* time, total for assembly: statistics. (line 6)
* title directive: Title. (line 6)
* tp register, V850: V850-Regs. (line 20)
* transform directive: Transform Directive. (line 6)
* trusted compiler: f. (line 6)
* turning preprocessing on and off: Preprocessing. (line 27)
* type directive (COFF version): Type. (line 11)
* type directive (ELF version): Type. (line 22)
* type of a symbol: Symbol Type. (line 6)
* ualong directive, SH: SH Directives. (line 6)
* uaword directive, SH: SH Directives. (line 6)
* ubyte directive, TIC54X: TIC54X-Directives. (line 36)
* uchar directive, TIC54X: TIC54X-Directives. (line 36)
* uhalf directive, TIC54X: TIC54X-Directives. (line 111)
* uint directive, TIC54X: TIC54X-Directives. (line 111)
* uleb128 directive: Uleb128. (line 6)
* ulong directive, TIC54X: TIC54X-Directives. (line 135)
* undefined section: Ld Sections. (line 36)
* union directive, TIC54X: TIC54X-Directives. (line 251)
* unreq directive, ARM: ARM Directives. (line 18)
* unsegm: Z8000 Directives. (line 14)
* usect directive, TIC54X: TIC54X-Directives. (line 263)
* ushort directive, TIC54X: TIC54X-Directives. (line 111)
* uword directive, TIC54X: TIC54X-Directives. (line 111)
* V850 command line options: V850 Options. (line 9)
* V850 floating point (IEEE): V850 Floating Point. (line 6)
* V850 line comment character: V850-Chars. (line 6)
* V850 machine directives: V850 Directives. (line 6)
* V850 opcodes: V850 Opcodes. (line 6)
* V850 options (none): V850 Options. (line 6)
* V850 register names: V850-Regs. (line 6)
* V850 support: V850-Dependent. (line 6)
* val directive: Val. (line 6)
* value attribute, COFF: Val. (line 6)
* value of a symbol: Symbol Value. (line 6)
* var directive, TIC54X: TIC54X-Directives. (line 273)
* VAX bitfields not supported: VAX-no. (line 6)
* VAX branch improvement: VAX-branch. (line 6)
* VAX command-line options ignored: VAX-Opts. (line 6)
* VAX displacement sizing character: VAX-operands. (line 12)
* VAX floating point: VAX-float. (line 6)
* VAX immediate character: VAX-operands. (line 6)
* VAX indirect character: VAX-operands. (line 9)
* VAX machine directives: VAX-directives. (line 6)
* VAX opcode mnemonics: VAX-opcodes. (line 6)
* VAX operand notation: VAX-operands. (line 6)
* VAX register names: VAX-operands. (line 17)
* VAX support: Vax-Dependent. (line 6)
* Vax-11 C compatibility: VAX-Opts. (line 42)
* VAX/VMS options: VAX-Opts. (line 42)
* version directive: Version. (line 6)
* version directive, TIC54X: TIC54X-Directives. (line 277)
* version of assembler: v. (line 6)
* versions of symbols: Symver. (line 6)
* visibility <1>: Protected. (line 6)
* visibility <2>: Internal. (line 6)
* visibility: Hidden. (line 6)
* VMS (VAX) options: VAX-Opts. (line 42)
* vtable_entry directive: VTableEntry. (line 6)
* vtable_inherit directive: VTableInherit. (line 6)
* warning directive: Warning. (line 6)
* warning for altered difference tables: K. (line 6)
* warning messages: Errors. (line 6)
* warnings, causing error: W. (line 16)
* warnings, M32R: M32R-Warnings. (line 6)
* warnings, suppressing: W. (line 11)
* warnings, switching on: W. (line 19)
* weak directive: Weak. (line 6)
* weakref directive: Weakref. (line 6)
* whitespace: Whitespace. (line 6)
* whitespace, removed by preprocessor: Preprocessing. (line 7)
* wide floating point directives, VAX: VAX-directives. (line 10)
* width directive, TIC54X: TIC54X-Directives. (line 127)
* Width of continuation lines of disassembly output: listing. (line 20)
* Width of first line disassembly output: listing. (line 15)
* Width of source line output: listing. (line 27)
* wmsg directive, TIC54X: TIC54X-Directives. (line 77)
* word directive: Word. (line 6)
* word directive, ARC: ARC Directives. (line 174)
* word directive, H8/300: H8/300 Directives. (line 6)
* word directive, i386: i386-Float. (line 21)
* word directive, SPARC: Sparc-Directives. (line 51)
* word directive, TIC54X: TIC54X-Directives. (line 111)
* word directive, x86-64: i386-Float. (line 21)
* writing patterns in memory: Fill. (line 6)
* wval: Z8000 Directives. (line 24)
* x86-64 arch directive: i386-Arch. (line 6)
* x86-64 att_syntax pseudo op: i386-Syntax. (line 6)
* x86-64 conversion instructions: i386-Mnemonics. (line 32)
* x86-64 floating point: i386-Float. (line 6)
* x86-64 immediate operands: i386-Syntax. (line 15)
* x86-64 instruction naming: i386-Mnemonics. (line 6)
* x86-64 intel_syntax pseudo op: i386-Syntax. (line 6)
* x86-64 jump optimization: i386-Jumps. (line 6)
* x86-64 jump, call, return: i386-Syntax. (line 38)
* x86-64 jump/call operands: i386-Syntax. (line 15)
* x86-64 memory references: i386-Memory. (line 6)
* x86-64 options: i386-Options. (line 6)
* x86-64 register operands: i386-Syntax. (line 15)
* x86-64 registers: i386-Regs. (line 6)
* x86-64 sections: i386-Syntax. (line 44)
* x86-64 size suffixes: i386-Syntax. (line 29)
* x86-64 source, destination operands: i386-Syntax. (line 22)
* x86-64 support: i386-Dependent. (line 6)
* x86-64 syntax compatibility: i386-Syntax. (line 6)
* xfloat directive, TIC54X: TIC54X-Directives. (line 64)
* xlong directive, TIC54X: TIC54X-Directives. (line 135)
* Xtensa architecture: Xtensa-Dependent. (line 6)
* Xtensa assembler syntax: Xtensa Syntax. (line 6)
* Xtensa directives: Xtensa Directives. (line 6)
* Xtensa opcode names: Xtensa Opcodes. (line 6)
* Xtensa register names: Xtensa Registers. (line 6)
* xword directive, SPARC: Sparc-Directives. (line 55)
* Z80 $: Z80-Chars. (line 8)
* Z80 ': Z80-Chars. (line 13)
* Z80 floating point: Z80 Floating Point. (line 6)
* Z80 line comment character: Z80-Chars. (line 6)
* Z80 options: Z80 Options. (line 6)
* Z80 registers: Z80-Regs. (line 6)
* Z80 support: Z80-Dependent. (line 6)
* Z80 Syntax: Z80 Options. (line 47)
* Z80, \: Z80-Chars. (line 11)
* Z80, case sensitivity: Z80-Case. (line 6)
* Z80-only directives: Z80 Directives. (line 9)
* Z800 addressing modes: Z8000-Addressing. (line 6)
* Z8000 directives: Z8000 Directives. (line 6)
* Z8000 line comment character: Z8000-Chars. (line 6)
* Z8000 line separator: Z8000-Chars. (line 8)
* Z8000 opcode summary: Z8000 Opcodes. (line 6)
* Z8000 options: Z8000 Options. (line 6)
* Z8000 registers: Z8000-Regs. (line 6)
* Z8000 support: Z8000-Dependent. (line 6)
* zdaoff pseudo-op, V850: V850 Opcodes. (line 99)
* zero register, V850: V850-Regs. (line 7)
* zero-terminated strings: Asciz. (line 6)
Tag Table:
Node: Top778
Node: Overview1695
Node: Manual28187
Node: GNU Assembler29131
Node: Object Formats30302
Node: Command Line30754
Node: Input Files31841
Node: Object33822
Node: Errors34718
Node: Invoking35913
Node: a37862
Node: alternate39634
Node: D39806
Node: f40039
Node: I40547
Node: K41091
Node: L41394
Node: listing42231
Node: M43823
Node: MD48224
Node: o48650
Node: R49105
Node: statistics50135
Node: traditional-format50542
Node: v51015
Node: W51290
Node: Z52197
Node: Syntax52719
Node: Preprocessing53310
Node: Whitespace54873
Node: Comments55269
Node: Symbol Intro57422
Node: Statements58112
Node: Constants60028
Node: Characters60659
Node: Strings61161
Node: Chars63327
Node: Numbers64081
Node: Integers64621
Node: Bignums65277
Node: Flonums65633
Node: Sections67380
Node: Secs Background67758
Node: Ld Sections72797
Node: As Sections75181
Node: Sub-Sections76091
Node: bss79238
Node: Symbols80188
Node: Labels80836
Node: Setting Symbols81567
Node: Symbol Names82063
Node: Dot86428
Node: Symbol Attributes86875
Node: Symbol Value87612
Node: Symbol Type88657
Node: a.out Symbols89045
Node: Symbol Desc89307
Node: Symbol Other89602
Node: COFF Symbols89771
Node: SOM Symbols90444
Node: Expressions90886
Node: Empty Exprs91635
Node: Integer Exprs91982
Node: Arguments92377
Node: Operators93483
Node: Prefix Ops93818
Node: Infix Ops94146
Node: Pseudo Ops96536
Node: Abort101731
Node: ABORT102136
Node: Align102323
Node: Ascii104605
Node: Asciz104914
Node: Balign105159
Node: Byte107022
Node: Comm107260
Node: CFI directives108634
Node: LNS directives110986
Node: Data113063
Node: Def113390
Node: Desc113622
Node: Dim114122
Node: Double114379
Node: Eject114717
Node: Else114892
Node: Elseif115188
Node: End115478
Node: Endef115693
Node: Endfunc115870
Node: Endif116045
Node: Equ116306
Node: Equiv116815
Node: Eqv117371
Node: Err117735
Node: Error118046
Node: Exitm118491
Node: Extern118660
Node: Fail118921
Node: File119366
Node: Fill119843
Node: Float120807
Node: Func121149
Node: Global121739
Node: Hidden122489
Node: hword123068
Node: Ident123396
Node: If123970
Node: Incbin127029
Node: Include127724
Node: Int128275
Node: Internal128656
Node: Irp129304
Node: Irpc130201
Node: Lcomm131118
Node: Lflags131866
Node: Line132060
Node: Linkonce132979
Node: Ln134208
Node: MRI134369
Node: List134707
Node: Long135315
Node: Macro135501
Node: Altmacro140064
Node: Noaltmacro141394
Node: Nolist141562
Node: Octa141992
Node: Org142326
Node: P2align143609
Node: Previous145537
Node: PopSection146231
Node: Print146739
Node: Protected146968
Node: Psize147615
Node: Purgem148299
Node: PushSection148520
Node: Quad149077
Node: Rept149532
Node: Sbttl149945
Node: Scl150310
Node: Section150651
Node: Set155791
Node: Short156428
Node: Single156748
Node: Size157093
Node: Sleb128157765
Node: Skip158087
Node: Space158409
Node: Stab159048
Node: String161050
Node: Struct161476
Node: SubSection162199
Node: Symver162760
Node: Tag165151
Node: Text165531
Node: Title165850
Node: Type166229
Node: Uleb128167306
Node: Val167630
Node: Version167880
Node: VTableEntry168155
Node: VTableInherit168445
Node: Warning168891
Node: Weak169125
Node: Weakref169794
Node: Word170759
Node: Deprecated172605
Node: Machine Dependencies172840
Node: Alpha-Dependent175604
Node: Alpha Notes176018
Node: Alpha Options176299
Node: Alpha Syntax178497
Node: Alpha-Chars178966
Node: Alpha-Regs179197
Node: Alpha-Relocs179584
Node: Alpha Floating Point185842
Node: Alpha Directives186064
Node: Alpha Opcodes191587
Node: ARC-Dependent191882
Node: ARC Options192265
Node: ARC Syntax193334
Node: ARC-Chars193566
Node: ARC-Regs193698
Node: ARC Floating Point193822
Node: ARC Directives194133
Node: ARC Opcodes200104
Node: ARM-Dependent200330
Node: ARM Options200757
Node: ARM Syntax206551
Node: ARM-Chars206783
Node: ARM-Regs207307
Node: ARM Floating Point207492
Node: ARM Directives207691
Node: ARM Opcodes214055
Node: ARM Mapping Symbols216143
Node: BFIN-Dependent216922
Node: BFIN Syntax217176
Node: BFIN Directives222873
Node: CRIS-Dependent223280
Node: CRIS-Opts223626
Ref: march-option225244
Node: CRIS-Expand227061
Node: CRIS-Symbols228244
Node: CRIS-Syntax229413
Node: CRIS-Chars229749
Node: CRIS-Pic230300
Ref: crispic230496
Node: CRIS-Regs234036
Node: CRIS-Pseudos234453
Ref: crisnous235229
Node: D10V-Dependent236511
Node: D10V-Opts236862
Node: D10V-Syntax237825
Node: D10V-Size238354
Node: D10V-Subs239327
Node: D10V-Chars240362
Node: D10V-Regs241966
Node: D10V-Addressing243011
Node: D10V-Word243697
Node: D10V-Float244212
Node: D10V-Opcodes244523
Node: D30V-Dependent244916
Node: D30V-Opts245269
Node: D30V-Syntax245944
Node: D30V-Size246476
Node: D30V-Subs247447
Node: D30V-Chars248482
Node: D30V-Guarded250780
Node: D30V-Regs251460
Node: D30V-Addressing252599
Node: D30V-Float253267
Node: D30V-Opcodes253578
Node: H8/300-Dependent253971
Node: H8/300 Options254381
Node: H8/300 Syntax254590
Node: H8/300-Chars254889
Node: H8/300-Regs255186
Node: H8/300-Addressing256103
Node: H8/300 Floating Point257142
Node: H8/300 Directives257467
Node: H8/300 Opcodes258593
Node: HPPA-Dependent266913
Node: HPPA Notes267346
Node: HPPA Options268102
Node: HPPA Syntax268295
Node: HPPA Floating Point269563
Node: HPPA Directives269767
Node: HPPA Opcodes278451
Node: ESA/390-Dependent278708
Node: ESA/390 Notes279168
Node: ESA/390 Options279959
Node: ESA/390 Syntax280169
Node: ESA/390 Floating Point282342
Node: ESA/390 Directives282621
Node: ESA/390 Opcodes285910
Node: i386-Dependent286172
Node: i386-Options287240
Node: i386-Syntax288430
Node: i386-Mnemonics290844
Node: i386-Regs293309
Node: i386-Prefixes295354
Node: i386-Memory298114
Node: i386-Jumps301051
Node: i386-Float302172
Node: i386-SIMD304001
Node: i386-16bit305110
Node: i386-Bugs307148
Node: i386-Arch307902
Node: i386-Notes310083
Node: i860-Dependent310941
Node: Notes-i860311337
Node: Options-i860312242
Node: Directives-i860313605
Node: Opcodes for i860314674
Node: i960-Dependent316841
Node: Options-i960317244
Node: Floating Point-i960321128
Node: Directives-i960321396
Node: Opcodes for i960323430
Node: callj-i960324047
Node: Compare-and-branch-i960324536
Node: IA-64-Dependent326440
Node: IA-64 Options326741
Node: IA-64 Syntax329901
Node: IA-64-Chars330264
Node: IA-64-Regs330494
Node: IA-64-Bits331420
Node: IA-64 Opcodes331929
Node: IP2K-Dependent332201
Node: IP2K-Opts332429
Node: M32C-Dependent332909
Node: M32C-Opts333433
Node: M32C-Modifiers333717
Node: M32R-Dependent335504
Node: M32R-Opts335825
Node: M32R-Directives339991
Node: M32R-Warnings343966
Node: M68K-Dependent346972
Node: M68K-Opts347439
Node: M68K-Syntax354818
Node: M68K-Moto-Syntax356657
Node: M68K-Float359246
Node: M68K-Directives359766
Node: M68K-opcodes361092
Node: M68K-Branch361318
Node: M68K-Chars365516
Node: M68HC11-Dependent365929
Node: M68HC11-Opts366460
Node: M68HC11-Syntax370276
Node: M68HC11-Modifiers372490
Node: M68HC11-Directives374318
Node: M68HC11-Float375694
Node: M68HC11-opcodes376222
Node: M68HC11-Branch376404
Node: MIPS-Dependent378851
Node: MIPS Opts379941
Node: MIPS Object387268
Node: MIPS Stabs388834
Node: MIPS symbol sizes389556
Node: MIPS ISA391225
Node: MIPS autoextend392374
Node: MIPS insn393104
Node: MIPS option stack393601
Node: MIPS ASE instruction generation overrides394375
Node: MMIX-Dependent395592
Node: MMIX-Opts395972
Node: MMIX-Expand399576
Node: MMIX-Syntax400891
Ref: mmixsite401248
Node: MMIX-Chars402089
Node: MMIX-Symbols402743
Node: MMIX-Regs404811
Node: MMIX-Pseudos405836
Ref: MMIX-loc405977
Ref: MMIX-local407057
Ref: MMIX-is407589
Ref: MMIX-greg407860
Ref: GREG-base408779
Ref: MMIX-byte410096
Ref: MMIX-constants410567
Ref: MMIX-prefix411213
Ref: MMIX-spec411587
Node: MMIX-mmixal411921
Node: MSP430-Dependent415418
Node: MSP430 Options415884
Node: MSP430 Syntax416170
Node: MSP430-Macros416486
Node: MSP430-Chars417217
Node: MSP430-Regs417530
Node: MSP430-Ext418090
Node: MSP430 Floating Point419911
Node: MSP430 Directives420135
Node: MSP430 Opcodes420926
Node: MSP430 Profiling Capability421321
Node: PDP-11-Dependent423650
Node: PDP-11-Options424039
Node: PDP-11-Pseudos429110
Node: PDP-11-Syntax429455
Node: PDP-11-Mnemonics430206
Node: PDP-11-Synthetic430508
Node: PJ-Dependent430726
Node: PJ Options430951
Node: PPC-Dependent431228
Node: PowerPC-Opts431515
Node: PowerPC-Pseudo433590
Node: SH-Dependent434189
Node: SH Options434601
Node: SH Syntax435529
Node: SH-Chars435802
Node: SH-Regs436096
Node: SH-Addressing436710
Node: SH Floating Point437619
Node: SH Directives438713
Node: SH Opcodes439083
Node: SH64-Dependent443405
Node: SH64 Options443768
Node: SH64 Syntax445485
Node: SH64-Chars445768
Node: SH64-Regs446068
Node: SH64-Addressing447164
Node: SH64 Directives448347
Node: SH64 Opcodes449457
Node: Sparc-Dependent450173
Node: Sparc-Opts450558
Node: Sparc-Aligned-Data452815
Node: Sparc-Float453670
Node: Sparc-Directives453871
Node: TIC54X-Dependent455831
Node: TIC54X-Opts456557
Node: TIC54X-Block457600
Node: TIC54X-Env457960
Node: TIC54X-Constants458308
Node: TIC54X-Subsyms458710
Node: TIC54X-Locals460619
Node: TIC54X-Builtins461363
Node: TIC54X-Ext463834
Node: TIC54X-Directives464405
Node: TIC54X-Macros475307
Node: TIC54X-MMRegs477417
Node: Z80-Dependent477633
Node: Z80 Options478021
Node: Z80 Syntax479444
Node: Z80-Chars480116
Node: Z80-Regs480649
Node: Z80-Case481001
Node: Z80 Floating Point481446
Node: Z80 Directives481640
Node: Z80 Opcodes483265
Node: Z8000-Dependent484607
Node: Z8000 Options485568
Node: Z8000 Syntax485785
Node: Z8000-Chars486075
Node: Z8000-Regs486308
Node: Z8000-Addressing487098
Node: Z8000 Directives488215
Node: Z8000 Opcodes489824
Node: Vax-Dependent499766
Node: VAX-Opts500283
Node: VAX-float504018
Node: VAX-directives504650
Node: VAX-opcodes505511
Node: VAX-branch505900
Node: VAX-operands508407
Node: VAX-no509170
Node: V850-Dependent509407
Node: V850 Options509805
Node: V850 Syntax512194
Node: V850-Chars512434
Node: V850-Regs512599
Node: V850 Floating Point514167
Node: V850 Directives514373
Node: V850 Opcodes515516
Node: Xtensa-Dependent521408
Node: Xtensa Options522137
Node: Xtensa Syntax524908
Node: Xtensa Opcodes526797
Node: Xtensa Registers528591
Node: Xtensa Optimizations529224
Node: Density Instructions529676
Node: Xtensa Automatic Alignment530778
Node: Xtensa Relaxation533524
Node: Xtensa Branch Relaxation534432
Node: Xtensa Call Relaxation535804
Node: Xtensa Immediate Relaxation537590
Node: Xtensa Directives540164
Node: Schedule Directive541872
Node: Longcalls Directive542212
Node: Transform Directive542756
Node: Literal Directive543498
Node: Literal Position Directive545283
Node: Literal Prefix Directive546982
Node: Absolute Literals Directive549145
Node: Reporting Bugs550452
Node: Bug Criteria551176
Node: Bug Reporting551941
Node: Acknowledgements558574
Ref: Acknowledgements-Footnote-1563472
Node: GNU Free Documentation License563498
Node: Index583225
End Tag Table