<?xml version="1.0" encoding="utf-8"?>
<!--
/*
**
** Copyright 2007 The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->
<resources>
<!-- Choices for timezone picker first level.
These values will be used as search terms for TimeZone displayName
strings. --> <skip />
<!-- The time zone picker screen has two levels. The first level allows the user to choose a region. -->
<string-array name="timezone_filters">
<!-- The next level of the time zoner picker should show time zones from the Americas. -->
<item>America</item>
<!-- The next level of the time zoner picker should show time zones from Europe. -->
<item>Europe</item>
<!-- The next level of the time zoner picker should show time zones from Africa. -->
<item>Africa</item>
<!-- The next level of the time zoner picker should show time zones from Asia. -->
<item>Asia</item>
<!-- The next level of the time zoner picker should show time zones from Australia. -->
<item>Australia</item>
<!-- The next level of the time zoner picker should show time zones from Pacific. -->
<item>Pacific</item>
<!-- The next level of the time zoner picker should show time zones from ALL regions. -->
<item>All</item>
</string-array>
<!-- There is a setting to control the format of dates displayed throughout the system. This is in the Date & Time Settings screen. These will be adjusted to use punctuation appropriate to the user's locale. -->
<string-array name="date_format_values" translatable="false">
<!-- The blank item means to use whatever the locale calls for. -->
<item></item>
<item>MM-dd-yyyy</item>
<item>dd-MM-yyyy</item>
<item>yyyy-MM-dd</item>
</string-array>
<!-- Display settings. The type of animations to show. -->
<string-array name="animations_entries">
<item>No animations</item>
<item>Some animations</item>
<item>All animations</item>
</string-array>
<!-- Display settings. Summary for each type of animation. -->
<string-array name="animations_summaries">
<item>No window animations are shown</item>
<item>Some window animations are shown</item>
<item>All window animations are shown</item>
</string-array>
<!-- Do not translate. -->
<string-array name="animations_values">
<!-- Do not translate. -->
<item>00</item>
<!-- Do not translate. -->
<item>01</item>
<!-- Do not translate. -->
<item>11</item>
</string-array>
<!-- Display settings. The delay in inactivity before the screen is turned off. These are shown ain a list dialog. -->
<string-array name="screen_timeout_entries">
<item>15 seconds</item>
<item>30 seconds</item>
<item>1 minute</item>
<item>2 minutes</item>
<item>10 minutes</item>
<!-- Choosing this means the screen will only turn off after the user manually does so. There will be no inactivity check. -->
<item>Never timeout</item>
</string-array>
<!-- Do not translate. -->
<string-array name="screen_timeout_values">
<!-- Do not translate. -->
<item>15000</item>
<!-- Do not translate. -->
<item>30000</item>
<!-- Do not translate. -->
<item>60000</item>
<!-- Do not translate. -->
<item>120000</item>
<!-- Do not translate. -->
<item>600000</item>
<!-- Do not translate. -->
<item>-1</item>
</string-array>
<!-- TTS settings -->
<!-- Default speech rate choices -->
<string-array name="tts_rate_entries">
<item>Very slow</item>
<item>Slow</item>
<item>Normal</item>
<item>Fast</item>
<item>Very fast</item>
</string-array>
<!-- Do not translate. -->
<string-array name="tts_rate_values">
<item>60</item>
<item>80</item>
<item>100</item>
<item>150</item>
<item>200</item>
</string-array>
<!-- Default pitch choices -->
<string-array name="tts_pitch_entries">
<item>Very low</item>
<item>Low</item>
<item>Normal</item>
<item>High</item>
<item>Very high</item>
</string-array>
<!-- Do not translate. -->
<string-array name="tts_pitch_values">
<item>50</item>
<item>80</item>
<item>100</item>
<item>120</item>
<item>150</item>
</string-array>
<!-- Default language choices -->
<string-array name="tts_lang_entries">
<item>American English</item>
<item>British English</item>
<item>French</item>
<item>German</item>
<item>Italian</item>
<item>Spanish</item>
</string-array>
<!-- Do not translate. -->
<string-array name="tts_lang_values">
<item>eng-USA</item>
<item>eng-GBR</item>
<item>fra-FRA</item>
<item>deu-DEU</item>
<item>ita-ITA</item>
<item>spa-ESP</item>
</string-array>
<!-- Do not translate. -->
<string-array name="tts_demo_strings">
<item>This is an example of speech synthesis in English.</item>
<item>This is an example of speech synthesis in English.</item>
<item>Voici un échantillon de synthèse vocale en français.</item>
<item>Dies ist ein Beispiel für Sprachsynthese in Deutsch.</item>
<item>Questo è un esempio di sintesi vocale in italiano.</item>
<item>Este es un ejemplo de síntesis de voz en español.</item>
</string-array>
<!-- Wi-Fi settings -->
<!-- Match this with code. --> <skip />
<!-- Wi-Fi settings. The type of security a Wi-Fi network has. The user can choose this when he adds a manual network, or configures an existing network. -->
<string-array name="wifi_security_entries">
<!-- Let the phone figure out the security type auutomatically. -->
<item>Auto</item>
<!-- The Wi-Fi network does not have any security. -->
<item>None</item>
<!-- Do not translate. The Wi-Fi network has WEP security. -->
<item>WEP</item>
<!-- The Wi-Fi network has WPA personal security. WPA Personal is a tech term, and might be better left untranslated? -->
<item>WPA/WPA2 PSK</item>
<!-- The Wi-Fi network has WPA EAP extensible authentication protocol. -->
<item>802.1x Enterprise</item>
</string-array>
<!-- Match this with code. --> <skip />
<!-- Wi-Fi settings. The type of security a Wi-Fi network has. The user can choose this when he adds a manual network, or configures an existing network. -->
<string-array name="wifi_security_without_auto_entries">
<!-- The Wi-Fi network does not have any security. -->
<item>None</item>
<!-- Do not translate. The Wi-Fi network has WEP security. -->
<item>WEP</item>
<!-- The Wi-Fi network has WPA personal security. WPA Personal is a tech term, and might be better left untranslated? -->
<item>WPA/WPA2 PSK</item>
<!-- The Wi-Fi network has WPA enterprise security. WPA Enterprise is a tech term, and might be better left untranslated? -->
<item>802.1x Enterprise</item>
</string-array>
<!-- Match this with code. --> <skip />
<!-- Wi-Fi settings. Presented as a list dialog to the user. He chooses the type of WEP key he entered. -->
<string-array name="wifi_wep_type">
<!-- This means the phone should figure out the type automatically the best it can. -->
<item>Auto</item>
<!-- Do not translate. -->
<item>WEP ASCII</item>
<!-- WEP key that is in hexadecimal. -->
<item>WEP hexadecimal</item>
</string-array>
<!-- Wi-Fi settings. Presented as a list dialog to the user to choose the Wi-Fi sleep policy. -->
<string-array name="wifi_sleep_policy_entries">
<!-- Wi-Fi should go to sleep when the screen turns off. -->
<item>When screen turns off</item>
<!-- When plugged in, never go to sleep. When on battery, go to sleep when screen turns off. -->
<item>Never when plugged in</item>
<!-- Never go to sleep. -->
<item>Never</item>
</string-array>
<!-- Match with wifi_sleep_policy_entries and the values of the settings in Settings class. --> <skip />
<!-- Do not translate. -->
<string-array name="wifi_sleep_policy_values">
<!-- Do not translate. -->
<item>0</item>
<!-- Do not translate. -->
<item>1</item>
<!-- Do not translate. -->
<item>2</item>
</string-array>
<!-- Match with constants in BatteryHistory class -->
<string-array name="battery_history_type_spinner">
<item>CPU usage</item>
<item>Network usage</item>
<item>GPS usage</item>
<item>Sensor usage</item>
<item>Partial wake usage</item>
<item>Other usage</item>
</string-array>
<!-- Match with constants in BatteryStats class -->
<string-array name="battery_history_which_spinner">
<item>Since last unplugged</item>
<item>Total since boot</item>
<item>Total in all time</item>
</string-array>
<!-- Display options for UsageStats class -->
<string-array name="usage_stats_display_order_types">
<item>Usage Time</item>
<item>Launch Count</item>
<item>Application Name</item>
</string-array>
<!-- EAP method -->
<string-array name="wifi_eap_entries">
<item>PEAP</item>
<item>TLS</item>
<item>TTLS</item>
</string-array>
<!-- Phase 2 options -->
<string-array name="wifi_phase2_entries">
<item>None</item>
<item>PAP</item>
<item>MSCHAP</item>
<item>MSCHAPV2</item>
<item>GTC</item>
</string-array>
<!-- Sound settings for emergency tone. -->
<string-array name="emergency_tone_entries">
<item>Off</item>
<item>Alert</item>
<item>Vibrate</item>
</string-array>
<!-- Do not translate. -->
<string-array name="emergency_tone_values">
<item>0</item>
<item>1</item>
<item>2</item>
</string-array>
<!-- Locales in this list are displayed with the corresponding
name from special_locale_names instead of using the name
from Locale.getDisplayName(). -->
<string-array translatable="false" name="special_locale_codes">
<item>zh_CN</item>
<item>zh_TW</item>
</string-array>
<string-array translatable="false" name="special_locale_names">
<item>中文（简体）</item>
<item>中文 (繁體)</item>
</string-array>
</resources>