//
// Copyright (C) 2015 The Android Open Source Project
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
#include "update_engine/payload_generator/inplace_generator.h"
#include <algorithm>
#include <map>
#include <set>
#include <string>
#include <utility>
#include <vector>
#include <base/stl_util.h>
#include "update_engine/common/utils.h"
#include "update_engine/payload_consumer/payload_constants.h"
#include "update_engine/payload_generator/cycle_breaker.h"
#include "update_engine/payload_generator/delta_diff_generator.h"
#include "update_engine/payload_generator/delta_diff_utils.h"
#include "update_engine/payload_generator/extent_ranges.h"
#include "update_engine/payload_generator/graph_types.h"
#include "update_engine/payload_generator/graph_utils.h"
#include "update_engine/payload_generator/topological_sort.h"
#include "update_engine/update_metadata.pb.h"
using std::make_pair;
using std::map;
using std::pair;
using std::set;
using std::string;
using std::vector;
namespace chromeos_update_engine {
using Block = InplaceGenerator::Block;
namespace {
// The only PayloadVersion supported by this implementation.
const PayloadVersion kInPlacePayloadVersion{kChromeOSMajorPayloadVersion,
kInPlaceMinorPayloadVersion};
// This class allocates non-existent temp blocks, starting from
// kTempBlockStart. Other code is responsible for converting these
// temp blocks into real blocks, as the client can't read or write to
// these blocks.
class DummyExtentAllocator {
public:
vector<Extent> Allocate(const uint64_t block_count) {
vector<Extent> ret(1);
ret[0].set_start_block(next_block_);
ret[0].set_num_blocks(block_count);
next_block_ += block_count;
return ret;
}
private:
uint64_t next_block_{kTempBlockStart};
};
// Takes a vector of blocks and returns an equivalent vector of Extent
// objects.
vector<Extent> CompressExtents(const vector<uint64_t>& blocks) {
vector<Extent> new_extents;
for (uint64_t block : blocks) {
AppendBlockToExtents(&new_extents, block);
}
return new_extents;
}
// Helper class to compare two operations by start block of the first Extent in
// their destination extents given the index of the operations in the graph.
class IndexedInstallOperationsDstComparator {
public:
explicit IndexedInstallOperationsDstComparator(Graph* graph)
: graph_(graph) {}
// Compares the operations in the vertex a and b of graph_.
bool operator()(size_t a, size_t b) const {
return diff_utils::CompareAopsByDestination((*graph_)[a].aop,
(*graph_)[b].aop);
}
private:
const Graph* const graph_;
};
} // namespace
void InplaceGenerator::CheckGraph(const Graph& graph) {
for (const Vertex& v : graph) {
CHECK(v.aop.op.has_type());
}
}
void InplaceGenerator::SubstituteBlocks(Vertex* vertex,
const vector<Extent>& remove_extents,
const vector<Extent>& replace_extents) {
// First, expand out the blocks that op reads from
vector<uint64_t> read_blocks = ExpandExtents(vertex->aop.op.src_extents());
{
// Expand remove_extents and replace_extents
vector<uint64_t> remove_extents_expanded = ExpandExtents(remove_extents);
vector<uint64_t> replace_extents_expanded = ExpandExtents(replace_extents);
CHECK_EQ(remove_extents_expanded.size(), replace_extents_expanded.size());
map<uint64_t, uint64_t> conversion;
for (vector<uint64_t>::size_type i = 0; i < replace_extents_expanded.size();
i++) {
conversion[remove_extents_expanded[i]] = replace_extents_expanded[i];
}
ApplyMap(&read_blocks, conversion);
for (auto& edge_prop_pair : vertex->out_edges) {
vector<uint64_t> write_before_deps_expanded =
ExpandExtents(edge_prop_pair.second.write_extents);
ApplyMap(&write_before_deps_expanded, conversion);
edge_prop_pair.second.write_extents =
CompressExtents(write_before_deps_expanded);
}
}
// Convert read_blocks back to extents
vertex->aop.op.clear_src_extents();
vector<Extent> new_extents = CompressExtents(read_blocks);
StoreExtents(new_extents, vertex->aop.op.mutable_src_extents());
}
bool InplaceGenerator::CutEdges(Graph* graph,
const set<Edge>& edges,
vector<CutEdgeVertexes>* out_cuts) {
DummyExtentAllocator scratch_allocator;
vector<CutEdgeVertexes> cuts;
cuts.reserve(edges.size());
uint64_t scratch_blocks_used = 0;
for (const Edge& edge : edges) {
cuts.resize(cuts.size() + 1);
vector<Extent> old_extents =
(*graph)[edge.first].out_edges[edge.second].extents;
// Choose some scratch space
scratch_blocks_used += graph_utils::EdgeWeight(*graph, edge);
cuts.back().tmp_extents =
scratch_allocator.Allocate(graph_utils::EdgeWeight(*graph, edge));
// create vertex to copy original->scratch
cuts.back().new_vertex = graph->size();
graph->emplace_back();
cuts.back().old_src = edge.first;
cuts.back().old_dst = edge.second;
EdgeProperties& cut_edge_properties =
(*graph)[edge.first].out_edges.find(edge.second)->second;
// This should never happen, as we should only be cutting edges between
// real file nodes, and write-before relationships are created from
// a real file node to a temp copy node:
CHECK(cut_edge_properties.write_extents.empty())
<< "Can't cut edge that has write-before relationship.";
// make node depend on the copy operation
(*graph)[edge.first].out_edges.insert(
make_pair(graph->size() - 1, cut_edge_properties));
// Set src/dst extents and other proto variables for copy operation
graph->back().aop.op.set_type(InstallOperation::MOVE);
StoreExtents(cut_edge_properties.extents,
graph->back().aop.op.mutable_src_extents());
StoreExtents(cuts.back().tmp_extents,
graph->back().aop.op.mutable_dst_extents());
graph->back().aop.op.set_src_length(graph_utils::EdgeWeight(*graph, edge) *
kBlockSize);
graph->back().aop.op.set_dst_length(graph->back().aop.op.src_length());
// make the dest node read from the scratch space
SubstituteBlocks(&((*graph)[edge.second]),
(*graph)[edge.first].out_edges[edge.second].extents,
cuts.back().tmp_extents);
// delete the old edge
CHECK_EQ(static_cast<Graph::size_type>(1),
(*graph)[edge.first].out_edges.erase(edge.second));
// Add an edge from dst to copy operation
EdgeProperties write_before_edge_properties;
write_before_edge_properties.write_extents = cuts.back().tmp_extents;
(*graph)[edge.second].out_edges.insert(
make_pair(graph->size() - 1, write_before_edge_properties));
}
out_cuts->swap(cuts);
return true;
}
// Creates all the edges for the graph. Writers of a block point to
// readers of the same block. This is because for an edge A->B, B
// must complete before A executes.
void InplaceGenerator::CreateEdges(Graph* graph, const vector<Block>& blocks) {
for (vector<Block>::size_type i = 0; i < blocks.size(); i++) {
// Blocks with both a reader and writer get an edge
if (blocks[i].reader == Vertex::kInvalidIndex ||
blocks[i].writer == Vertex::kInvalidIndex)
continue;
// Don't have a node depend on itself
if (blocks[i].reader == blocks[i].writer)
continue;
// See if there's already an edge we can add onto
Vertex::EdgeMap::iterator edge_it =
(*graph)[blocks[i].writer].out_edges.find(blocks[i].reader);
if (edge_it == (*graph)[blocks[i].writer].out_edges.end()) {
// No existing edge. Create one
(*graph)[blocks[i].writer].out_edges.insert(
make_pair(blocks[i].reader, EdgeProperties()));
edge_it = (*graph)[blocks[i].writer].out_edges.find(blocks[i].reader);
CHECK(edge_it != (*graph)[blocks[i].writer].out_edges.end());
}
AppendBlockToExtents(&edge_it->second.extents, i);
}
}
namespace {
class SortCutsByTopoOrderLess {
public:
explicit SortCutsByTopoOrderLess(
const vector<vector<Vertex::Index>::size_type>& table)
: table_(table) {}
bool operator()(const CutEdgeVertexes& a, const CutEdgeVertexes& b) {
return table_[a.old_dst] < table_[b.old_dst];
}
private:
const vector<vector<Vertex::Index>::size_type>& table_;
};
} // namespace
void InplaceGenerator::GenerateReverseTopoOrderMap(
const vector<Vertex::Index>& op_indexes,
vector<vector<Vertex::Index>::size_type>* reverse_op_indexes) {
vector<vector<Vertex::Index>::size_type> table(op_indexes.size());
for (vector<Vertex::Index>::size_type i = 0, e = op_indexes.size(); i != e;
++i) {
Vertex::Index node = op_indexes[i];
if (table.size() < (node + 1)) {
table.resize(node + 1);
}
table[node] = i;
}
reverse_op_indexes->swap(table);
}
void InplaceGenerator::SortCutsByTopoOrder(
const vector<Vertex::Index>& op_indexes, vector<CutEdgeVertexes>* cuts) {
// first, make a reverse lookup table.
vector<vector<Vertex::Index>::size_type> table;
GenerateReverseTopoOrderMap(op_indexes, &table);
SortCutsByTopoOrderLess less(table);
sort(cuts->begin(), cuts->end(), less);
}
void InplaceGenerator::MoveAndSortFullOpsToBack(
Graph* graph, vector<Vertex::Index>* op_indexes) {
vector<Vertex::Index> ret;
vector<Vertex::Index> full_ops;
ret.reserve(op_indexes->size());
for (auto op_index : *op_indexes) {
InstallOperation::Type type = (*graph)[op_index].aop.op.type();
if (type == InstallOperation::REPLACE ||
type == InstallOperation::REPLACE_BZ) {
full_ops.push_back(op_index);
} else {
ret.push_back(op_index);
}
}
LOG(INFO) << "Stats: " << full_ops.size() << " full ops out of "
<< (full_ops.size() + ret.size()) << " total ops.";
// Sort full ops according to their dst_extents.
sort(full_ops.begin(),
full_ops.end(),
IndexedInstallOperationsDstComparator(graph));
ret.insert(ret.end(), full_ops.begin(), full_ops.end());
op_indexes->swap(ret);
}
namespace {
template <typename T>
bool TempBlocksExistInExtents(const T& extents) {
for (const auto& extent : extents) {
uint64_t start = extent.start_block();
uint64_t num = extent.num_blocks();
if (start >= kTempBlockStart || (start + num) >= kTempBlockStart) {
LOG(ERROR) << "temp block!";
LOG(ERROR) << "start: " << start << ", num: " << num;
LOG(ERROR) << "kTempBlockStart: " << kTempBlockStart;
LOG(ERROR) << "returning true";
return true;
}
// check for wrap-around, which would be a bug:
CHECK(start <= (start + num));
}
return false;
}
// Converts the cuts, which must all have the same |old_dst| member,
// to full. It does this by converting the |old_dst| to REPLACE or
// REPLACE_BZ, dropping all incoming edges to |old_dst|, and marking
// all temp nodes invalid.
bool ConvertCutsToFull(
Graph* graph,
const string& new_part,
BlobFileWriter* blob_file,
vector<Vertex::Index>* op_indexes,
vector<vector<Vertex::Index>::size_type>* reverse_op_indexes,
const vector<CutEdgeVertexes>& cuts) {
CHECK(!cuts.empty());
set<Vertex::Index> deleted_nodes;
for (const CutEdgeVertexes& cut : cuts) {
TEST_AND_RETURN_FALSE(
InplaceGenerator::ConvertCutToFullOp(graph, cut, new_part, blob_file));
deleted_nodes.insert(cut.new_vertex);
}
deleted_nodes.insert(cuts[0].old_dst);
vector<Vertex::Index> new_op_indexes;
new_op_indexes.reserve(op_indexes->size());
for (Vertex::Index vertex_index : *op_indexes) {
if (base::ContainsKey(deleted_nodes, vertex_index))
continue;
new_op_indexes.push_back(vertex_index);
}
new_op_indexes.push_back(cuts[0].old_dst);
op_indexes->swap(new_op_indexes);
InplaceGenerator::GenerateReverseTopoOrderMap(*op_indexes,
reverse_op_indexes);
return true;
}
// Tries to assign temp blocks for a collection of cuts, all of which share
// the same old_dst member. If temp blocks can't be found, old_dst will be
// converted to a REPLACE or REPLACE_BZ operation. Returns true on success,
// which can happen even if blocks are converted to full. Returns false
// on exceptional error cases.
bool AssignBlockForAdjoiningCuts(
Graph* graph,
const string& new_part,
BlobFileWriter* blob_file,
vector<Vertex::Index>* op_indexes,
vector<vector<Vertex::Index>::size_type>* reverse_op_indexes,
const vector<CutEdgeVertexes>& cuts) {
CHECK(!cuts.empty());
const Vertex::Index old_dst = cuts[0].old_dst;
// Calculate # of blocks needed
uint64_t blocks_needed = 0;
vector<uint64_t> cuts_blocks_needed(cuts.size());
for (vector<CutEdgeVertexes>::size_type i = 0; i < cuts.size(); ++i) {
uint64_t cut_blocks_needed = 0;
for (const Extent& extent : cuts[i].tmp_extents) {
cut_blocks_needed += extent.num_blocks();
}
blocks_needed += cut_blocks_needed;
cuts_blocks_needed[i] = cut_blocks_needed;
}
// Find enough blocks
ExtentRanges scratch_ranges;
// Each block that's supplying temp blocks and the corresponding blocks:
typedef vector<pair<Vertex::Index, ExtentRanges>> SupplierVector;
SupplierVector block_suppliers;
uint64_t scratch_blocks_found = 0;
for (vector<Vertex::Index>::size_type i = (*reverse_op_indexes)[old_dst] + 1,
e = op_indexes->size();
i < e;
++i) {
Vertex::Index test_node = (*op_indexes)[i];
if (!(*graph)[test_node].valid)
continue;
// See if this node has sufficient blocks
ExtentRanges ranges;
ranges.AddRepeatedExtents((*graph)[test_node].aop.op.dst_extents());
ranges.SubtractExtent(
ExtentForRange(kTempBlockStart, kSparseHole - kTempBlockStart));
ranges.SubtractRepeatedExtents((*graph)[test_node].aop.op.src_extents());
// For now, for simplicity, subtract out all blocks in read-before
// dependencies.
for (Vertex::EdgeMap::const_iterator
edge_i = (*graph)[test_node].out_edges.begin(),
edge_e = (*graph)[test_node].out_edges.end();
edge_i != edge_e;
++edge_i) {
ranges.SubtractExtents(edge_i->second.extents);
}
// Prevent using the block 0 as scratch space due to crbug.com/480751.
if (ranges.ContainsBlock(0)) {
LOG(INFO) << "Removing block 0 from the selected scratch range in vertex "
<< i;
ranges.SubtractBlock(0);
}
if (ranges.blocks() == 0)
continue;
if (ranges.blocks() + scratch_blocks_found > blocks_needed) {
// trim down ranges
vector<Extent> new_ranges =
ranges.GetExtentsForBlockCount(blocks_needed - scratch_blocks_found);
ranges = ExtentRanges();
ranges.AddExtents(new_ranges);
}
scratch_ranges.AddRanges(ranges);
block_suppliers.push_back(make_pair(test_node, ranges));
scratch_blocks_found += ranges.blocks();
if (scratch_ranges.blocks() >= blocks_needed)
break;
}
if (scratch_ranges.blocks() < blocks_needed) {
LOG(INFO) << "Unable to find sufficient scratch";
TEST_AND_RETURN_FALSE(ConvertCutsToFull(
graph, new_part, blob_file, op_indexes, reverse_op_indexes, cuts));
return true;
}
// Use the scratch we found
TEST_AND_RETURN_FALSE(scratch_ranges.blocks() == scratch_blocks_found);
// Make all the suppliers depend on this node
for (const auto& index_range_pair : block_suppliers) {
graph_utils::AddReadBeforeDepExtents(
&(*graph)[index_range_pair.first],
old_dst,
index_range_pair.second.GetExtentsForBlockCount(
index_range_pair.second.blocks()));
}
// Replace temp blocks in each cut
for (vector<CutEdgeVertexes>::size_type i = 0; i < cuts.size(); ++i) {
const CutEdgeVertexes& cut = cuts[i];
vector<Extent> real_extents =
scratch_ranges.GetExtentsForBlockCount(cuts_blocks_needed[i]);
scratch_ranges.SubtractExtents(real_extents);
// Fix the old dest node w/ the real blocks
InplaceGenerator::SubstituteBlocks(
&(*graph)[old_dst], cut.tmp_extents, real_extents);
// Fix the new node w/ the real blocks. Since the new node is just a
// copy operation, we can replace all the dest extents w/ the real
// blocks.
InstallOperation* op = &(*graph)[cut.new_vertex].aop.op;
op->clear_dst_extents();
StoreExtents(real_extents, op->mutable_dst_extents());
}
return true;
}
} // namespace
bool InplaceGenerator::AssignTempBlocks(
Graph* graph,
const string& new_part,
BlobFileWriter* blob_file,
vector<Vertex::Index>* op_indexes,
vector<vector<Vertex::Index>::size_type>* reverse_op_indexes,
const vector<CutEdgeVertexes>& cuts) {
CHECK(!cuts.empty());
// group of cuts w/ the same old_dst:
vector<CutEdgeVertexes> cuts_group;
for (vector<CutEdgeVertexes>::size_type i = cuts.size() - 1, e = 0; true;
--i) {
LOG(INFO) << "Fixing temp blocks in cut " << i
<< ": old dst: " << cuts[i].old_dst
<< " new vertex: " << cuts[i].new_vertex
<< " path: " << (*graph)[cuts[i].old_dst].aop.name;
if (cuts_group.empty() || (cuts_group[0].old_dst == cuts[i].old_dst)) {
cuts_group.push_back(cuts[i]);
} else {
CHECK(!cuts_group.empty());
TEST_AND_RETURN_FALSE(AssignBlockForAdjoiningCuts(graph,
new_part,
blob_file,
op_indexes,
reverse_op_indexes,
cuts_group));
cuts_group.clear();
cuts_group.push_back(cuts[i]);
}
if (i == e) {
// break out of for() loop
break;
}
}
CHECK(!cuts_group.empty());
TEST_AND_RETURN_FALSE(AssignBlockForAdjoiningCuts(
graph, new_part, blob_file, op_indexes, reverse_op_indexes, cuts_group));
return true;
}
bool InplaceGenerator::NoTempBlocksRemain(const Graph& graph) {
size_t idx = 0;
for (Graph::const_iterator it = graph.begin(), e = graph.end(); it != e;
++it, ++idx) {
if (!it->valid)
continue;
const InstallOperation& op = it->aop.op;
if (TempBlocksExistInExtents(op.dst_extents()) ||
TempBlocksExistInExtents(op.src_extents())) {
LOG(INFO) << "bad extents in node " << idx;
LOG(INFO) << "so yeah";
return false;
}
// Check out-edges:
for (const auto& edge_prop_pair : it->out_edges) {
if (TempBlocksExistInExtents(edge_prop_pair.second.extents) ||
TempBlocksExistInExtents(edge_prop_pair.second.write_extents)) {
LOG(INFO) << "bad out edge in node " << idx;
LOG(INFO) << "so yeah";
return false;
}
}
}
return true;
}
bool InplaceGenerator::ConvertCutToFullOp(Graph* graph,
const CutEdgeVertexes& cut,
const string& new_part,
BlobFileWriter* blob_file) {
// Drop all incoming edges, keep all outgoing edges
// Keep all outgoing edges
if ((*graph)[cut.old_dst].aop.op.type() != InstallOperation::REPLACE_BZ &&
(*graph)[cut.old_dst].aop.op.type() != InstallOperation::REPLACE) {
Vertex::EdgeMap out_edges = (*graph)[cut.old_dst].out_edges;
graph_utils::DropWriteBeforeDeps(&out_edges);
// Replace the operation with a REPLACE or REPLACE_BZ to generate the same
// |new_extents| list of blocks and update the graph.
vector<AnnotatedOperation> new_aop;
vector<Extent> new_extents;
ExtentsToVector((*graph)[cut.old_dst].aop.op.dst_extents(), &new_extents);
TEST_AND_RETURN_FALSE(diff_utils::DeltaReadFile(
&new_aop,
"", // old_part
new_part,
vector<Extent>(), // old_extents
new_extents,
{}, // old_deflates
{}, // new_deflates
(*graph)[cut.old_dst].aop.name,
-1, // chunk_blocks, forces to have a single operation.
kInPlacePayloadVersion,
blob_file));
TEST_AND_RETURN_FALSE(new_aop.size() == 1);
TEST_AND_RETURN_FALSE(AddInstallOpToGraph(
graph, cut.old_dst, nullptr, new_aop.front().op, new_aop.front().name));
(*graph)[cut.old_dst].out_edges = out_edges;
// Right now we don't have doubly-linked edges, so we have to scan
// the whole graph.
graph_utils::DropIncomingEdgesTo(graph, cut.old_dst);
}
// Delete temp node
(*graph)[cut.old_src].out_edges.erase(cut.new_vertex);
CHECK((*graph)[cut.old_dst].out_edges.find(cut.new_vertex) ==
(*graph)[cut.old_dst].out_edges.end());
(*graph)[cut.new_vertex].valid = false;
LOG(INFO) << "marked node invalid: " << cut.new_vertex;
return true;
}
bool InplaceGenerator::ConvertGraphToDag(Graph* graph,
const string& new_part,
BlobFileWriter* blob_file,
vector<Vertex::Index>* final_order,
Vertex::Index scratch_vertex) {
CycleBreaker cycle_breaker;
LOG(INFO) << "Finding cycles...";
set<Edge> cut_edges;
cycle_breaker.BreakCycles(*graph, &cut_edges);
LOG(INFO) << "done finding cycles";
CheckGraph(*graph);
// Calculate number of scratch blocks needed
LOG(INFO) << "Cutting cycles...";
vector<CutEdgeVertexes> cuts;
TEST_AND_RETURN_FALSE(CutEdges(graph, cut_edges, &cuts));
LOG(INFO) << "done cutting cycles";
LOG(INFO) << "There are " << cuts.size() << " cuts.";
CheckGraph(*graph);
LOG(INFO) << "Creating initial topological order...";
TopologicalSort(*graph, final_order);
LOG(INFO) << "done with initial topo order";
CheckGraph(*graph);
LOG(INFO) << "Moving full ops to the back";
MoveAndSortFullOpsToBack(graph, final_order);
LOG(INFO) << "done moving full ops to back";
vector<vector<Vertex::Index>::size_type> inverse_final_order;
GenerateReverseTopoOrderMap(*final_order, &inverse_final_order);
SortCutsByTopoOrder(*final_order, &cuts);
if (!cuts.empty())
TEST_AND_RETURN_FALSE(AssignTempBlocks(
graph, new_part, blob_file, final_order, &inverse_final_order, cuts));
LOG(INFO) << "Making sure all temp blocks have been allocated";
// Remove the scratch node, if any
if (scratch_vertex != Vertex::kInvalidIndex) {
final_order->erase(final_order->begin() +
inverse_final_order[scratch_vertex]);
(*graph)[scratch_vertex].valid = false;
GenerateReverseTopoOrderMap(*final_order, &inverse_final_order);
}
graph_utils::DumpGraph(*graph);
CHECK(NoTempBlocksRemain(*graph));
LOG(INFO) << "done making sure all temp blocks are allocated";
return true;
}
void InplaceGenerator::CreateScratchNode(uint64_t start_block,
uint64_t num_blocks,
Vertex* vertex) {
vertex->aop.name = "<scratch>";
vertex->aop.op.set_type(InstallOperation::REPLACE_BZ);
vertex->aop.op.set_data_offset(0);
vertex->aop.op.set_data_length(0);
Extent* extent = vertex->aop.op.add_dst_extents();
extent->set_start_block(start_block);
extent->set_num_blocks(num_blocks);
}
bool InplaceGenerator::AddInstallOpToBlocksVector(
const InstallOperation& operation,
const Graph& graph,
Vertex::Index vertex,
vector<Block>* blocks) {
// See if this is already present.
TEST_AND_RETURN_FALSE(operation.dst_extents_size() > 0);
enum BlockField { READER = 0, WRITER, BLOCK_FIELD_COUNT };
for (int field = READER; field < BLOCK_FIELD_COUNT; field++) {
const char* past_participle = (field == READER) ? "read" : "written";
const google::protobuf::RepeatedPtrField<Extent>& extents =
(field == READER) ? operation.src_extents() : operation.dst_extents();
Vertex::Index Block::*access_type =
(field == READER) ? &Block::reader : &Block::writer;
for (const Extent& extent : extents) {
for (uint64_t block = extent.start_block();
block < (extent.start_block() + extent.num_blocks());
block++) {
if ((*blocks)[block].*access_type != Vertex::kInvalidIndex) {
LOG(FATAL) << "Block " << block << " is already " << past_participle
<< " by " << (*blocks)[block].*access_type << "("
<< graph[(*blocks)[block].*access_type].aop.name
<< ") and also " << vertex << "(" << graph[vertex].aop.name
<< ")";
}
(*blocks)[block].*access_type = vertex;
}
}
}
return true;
}
bool InplaceGenerator::AddInstallOpToGraph(Graph* graph,
Vertex::Index existing_vertex,
vector<Block>* blocks,
const InstallOperation& operation,
const string& op_name) {
Vertex::Index vertex = existing_vertex;
if (vertex == Vertex::kInvalidIndex) {
graph->emplace_back();
vertex = graph->size() - 1;
}
(*graph)[vertex].aop.op = operation;
CHECK((*graph)[vertex].aop.op.has_type());
(*graph)[vertex].aop.name = op_name;
if (blocks)
TEST_AND_RETURN_FALSE(InplaceGenerator::AddInstallOpToBlocksVector(
(*graph)[vertex].aop.op, *graph, vertex, blocks));
return true;
}
void InplaceGenerator::ApplyMap(vector<uint64_t>* collection,
const map<uint64_t, uint64_t>& the_map) {
for (uint64_t& elem : *collection) {
const auto& map_it = the_map.find(elem);
if (map_it != the_map.end())
elem = map_it->second;
}
}
bool InplaceGenerator::ResolveReadAfterWriteDependencies(
const PartitionConfig& old_part,
const PartitionConfig& new_part,
uint64_t partition_size,
size_t block_size,
BlobFileWriter* blob_file,
vector<AnnotatedOperation>* aops) {
// Convert the operations to the graph.
Graph graph;
CheckGraph(graph);
vector<Block> blocks(std::max(old_part.size, new_part.size) / block_size);
for (const auto& aop : *aops) {
AddInstallOpToGraph(
&graph, Vertex::kInvalidIndex, &blocks, aop.op, aop.name);
}
CheckGraph(graph);
// Final scratch block (if there's space)
Vertex::Index scratch_vertex = Vertex::kInvalidIndex;
if (blocks.size() < (partition_size / block_size)) {
scratch_vertex = graph.size();
graph.emplace_back();
size_t scratch_blocks = (partition_size / block_size) - blocks.size();
LOG(INFO) << "Added " << scratch_blocks << " scratch space blocks.";
CreateScratchNode(blocks.size(), scratch_blocks, &graph.back());
}
CheckGraph(graph);
LOG(INFO) << "Creating edges...";
CreateEdges(&graph, blocks);
LOG(INFO) << "Done creating edges";
CheckGraph(graph);
vector<Vertex::Index> final_order;
TEST_AND_RETURN_FALSE(ConvertGraphToDag(
&graph, new_part.path, blob_file, &final_order, scratch_vertex));
// Copy operations over to the |aops| vector in the final_order generated by
// the topological sort.
aops->clear();
aops->reserve(final_order.size());
for (const Vertex::Index vertex_index : final_order) {
const Vertex& vertex = graph[vertex_index];
aops->push_back(vertex.aop);
}
return true;
}
bool InplaceGenerator::GenerateOperations(const PayloadGenerationConfig& config,
const PartitionConfig& old_part,
const PartitionConfig& new_part,
BlobFileWriter* blob_file,
vector<AnnotatedOperation>* aops) {
TEST_AND_RETURN_FALSE(old_part.name == new_part.name);
TEST_AND_RETURN_FALSE(config.version.major == kInPlacePayloadVersion.major);
TEST_AND_RETURN_FALSE(config.version.minor == kInPlacePayloadVersion.minor);
ssize_t hard_chunk_blocks =
(config.hard_chunk_size == -1
? -1
: config.hard_chunk_size / config.block_size);
size_t soft_chunk_blocks = config.soft_chunk_size / config.block_size;
uint64_t partition_size = new_part.size;
if (new_part.name == kPartitionNameRoot)
partition_size = config.rootfs_partition_size;
LOG(INFO) << "Delta compressing " << new_part.name << " partition...";
TEST_AND_RETURN_FALSE(diff_utils::DeltaReadPartition(aops,
old_part,
new_part,
hard_chunk_blocks,
soft_chunk_blocks,
config.version,
blob_file));
LOG(INFO) << "Done reading " << new_part.name;
TEST_AND_RETURN_FALSE(ResolveReadAfterWriteDependencies(
old_part, new_part, partition_size, config.block_size, blob_file, aops));
LOG(INFO) << "Done reordering " << new_part.name;
return true;
}
}; // namespace chromeos_update_engine