普通文本  |  1085行  |  36.53 KB

/******************************************************************************
 *
 *  Copyright 2002-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  this file contains the connection interface functions
 *
 ******************************************************************************/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "bt_common.h"
#include "bt_types.h"

#include "l2c_api.h"
#include "l2cdefs.h"

#include "btm_api.h"
#include "btm_int.h"
#include "btu.h"

#include "hiddefs.h"

#include "bt_utils.h"
#include "hidh_api.h"
#include "hidh_int.h"

#include "log/log.h"
#include "osi/include/osi.h"

static uint8_t find_conn_by_cid(uint16_t cid);
static void hidh_conn_retry(uint8_t dhandle);

/******************************************************************************/
/*            L O C A L    F U N C T I O N     P R O T O T Y P E S            */
/******************************************************************************/
static void hidh_l2cif_connect_ind(const RawAddress& bd_addr,
                                   uint16_t l2cap_cid, uint16_t psm,
                                   uint8_t l2cap_id);
static void hidh_l2cif_connect_cfm(uint16_t l2cap_cid, uint16_t result);
static void hidh_l2cif_config_ind(uint16_t l2cap_cid, tL2CAP_CFG_INFO* p_cfg);
static void hidh_l2cif_config_cfm(uint16_t l2cap_cid, tL2CAP_CFG_INFO* p_cfg);
static void hidh_l2cif_disconnect_ind(uint16_t l2cap_cid, bool ack_needed);
static void hidh_l2cif_data_ind(uint16_t l2cap_cid, BT_HDR* p_msg);
static void hidh_l2cif_disconnect_cfm(uint16_t l2cap_cid, uint16_t result);
static void hidh_l2cif_cong_ind(uint16_t l2cap_cid, bool congested);

static const tL2CAP_APPL_INFO hst_reg_info = {
    hidh_l2cif_connect_ind,
    hidh_l2cif_connect_cfm,
    NULL,
    hidh_l2cif_config_ind,
    hidh_l2cif_config_cfm,
    hidh_l2cif_disconnect_ind,
    hidh_l2cif_disconnect_cfm,
    NULL,
    hidh_l2cif_data_ind,
    hidh_l2cif_cong_ind,
    NULL, /* tL2CA_TX_COMPLETE_CB */
    NULL /* tL2CA_CREDITS_RECEIVED_CB */};

/*******************************************************************************
 *
 * Function         hidh_l2cif_reg
 *
 * Description      This function initializes the SDP unit.
 *
 * Returns          void
 *
 ******************************************************************************/
tHID_STATUS hidh_conn_reg(void) {
  int xx;

  /* Initialize the L2CAP configuration. We only care about MTU and flush */
  memset(&hh_cb.l2cap_cfg, 0, sizeof(tL2CAP_CFG_INFO));

  hh_cb.l2cap_cfg.mtu_present = true;
  hh_cb.l2cap_cfg.mtu = HID_HOST_MTU;
  hh_cb.l2cap_cfg.flush_to_present = true;
  hh_cb.l2cap_cfg.flush_to = HID_HOST_FLUSH_TO;

  /* Now, register with L2CAP */
  if (!L2CA_Register(HID_PSM_CONTROL, (tL2CAP_APPL_INFO*)&hst_reg_info,
                     false /* enable_snoop */)) {
    HIDH_TRACE_ERROR("HID-Host Control Registration failed");
    return (HID_ERR_L2CAP_FAILED);
  }
  if (!L2CA_Register(HID_PSM_INTERRUPT, (tL2CAP_APPL_INFO*)&hst_reg_info,
                     false /* enable_snoop */)) {
    L2CA_Deregister(HID_PSM_CONTROL);
    HIDH_TRACE_ERROR("HID-Host Interrupt Registration failed");
    return (HID_ERR_L2CAP_FAILED);
  }

  for (xx = 0; xx < HID_HOST_MAX_DEVICES; xx++) {
    hh_cb.devices[xx].in_use = false;
    hh_cb.devices[xx].conn.conn_state = HID_CONN_STATE_UNUSED;
  }

  return (HID_SUCCESS);
}

/*******************************************************************************
 *
 * Function         hidh_conn_disconnect
 *
 * Description      This function disconnects a connection.
 *
 * Returns          true if disconnect started, false if already disconnected
 *
 ******************************************************************************/
tHID_STATUS hidh_conn_disconnect(uint8_t dhandle) {
  tHID_CONN* p_hcon = &hh_cb.devices[dhandle].conn;

  HIDH_TRACE_EVENT("HID-Host disconnect");

  if ((p_hcon->ctrl_cid != 0) || (p_hcon->intr_cid != 0)) {
    p_hcon->conn_state = HID_CONN_STATE_DISCONNECTING;

    /* Set l2cap idle timeout to 0 (so ACL link is disconnected
     * immediately after last channel is closed) */
    L2CA_SetIdleTimeoutByBdAddr(hh_cb.devices[dhandle].addr, 0,
                                BT_TRANSPORT_BR_EDR);
    /* Disconnect both interrupt and control channels */
    if (p_hcon->intr_cid)
      L2CA_DisconnectReq(p_hcon->intr_cid);
    else if (p_hcon->ctrl_cid)
      L2CA_DisconnectReq(p_hcon->ctrl_cid);
  } else {
    p_hcon->conn_state = HID_CONN_STATE_UNUSED;
  }

  return (HID_SUCCESS);
}

/*******************************************************************************
 *
 * Function         hidh_sec_check_complete_term
 *
 * Description      HID security check complete callback function.
 *
 * Returns          Send L2CA_ConnectRsp OK if secutiry check succeed; otherwise
 *                  send security block L2C connection response.
 *
 ******************************************************************************/
void hidh_sec_check_complete_term(UNUSED_ATTR const RawAddress* bd_addr,
                                  UNUSED_ATTR tBT_TRANSPORT transport,
                                  void* p_ref_data, uint8_t res) {
  tHID_HOST_DEV_CTB* p_dev = (tHID_HOST_DEV_CTB*)p_ref_data;

  if (res == BTM_SUCCESS && p_dev->conn.conn_state == HID_CONN_STATE_SECURITY) {
    p_dev->conn.disc_reason = HID_SUCCESS; /* Authentication passed. Reset
                                              disc_reason (from
                                              HID_ERR_AUTH_FAILED) */

    p_dev->conn.conn_state = HID_CONN_STATE_CONNECTING_INTR;

    /* Send response to the L2CAP layer. */
    L2CA_ConnectRsp(p_dev->addr, p_dev->conn.ctrl_id, p_dev->conn.ctrl_cid,
                    L2CAP_CONN_OK, L2CAP_CONN_OK);

    /* Send a Configuration Request. */
    L2CA_ConfigReq(p_dev->conn.ctrl_cid, &hh_cb.l2cap_cfg);

  }
  /* security check fail */
  else if (res != BTM_SUCCESS) {
    p_dev->conn.disc_reason =
        HID_ERR_AUTH_FAILED; /* Save reason for disconnecting */
    p_dev->conn.conn_state = HID_CONN_STATE_UNUSED;
    L2CA_ConnectRsp(p_dev->addr, p_dev->conn.ctrl_id, p_dev->conn.ctrl_cid,
                    L2CAP_CONN_SECURITY_BLOCK, L2CAP_CONN_OK);
  }
}

/*******************************************************************************
 *
 * Function         hidh_l2cif_connect_ind
 *
 * Description      This function handles an inbound connection indication
 *                  from L2CAP. This is the case where we are acting as a
 *                  server.
 *
 * Returns          void
 *
 ******************************************************************************/
static void hidh_l2cif_connect_ind(const RawAddress& bd_addr,
                                   uint16_t l2cap_cid, uint16_t psm,
                                   uint8_t l2cap_id) {
  tHID_CONN* p_hcon;
  bool bAccept = true;
  uint8_t i = HID_HOST_MAX_DEVICES;
  tHID_HOST_DEV_CTB* p_dev;

  HIDH_TRACE_EVENT("HID-Host Rcvd L2CAP conn ind, PSM: 0x%04x  CID 0x%x", psm,
                   l2cap_cid);

  /* always add incoming connection device into HID database by default */
  if (HID_HostAddDev(bd_addr, HID_SEC_REQUIRED, &i) != HID_SUCCESS) {
    L2CA_ConnectRsp(bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_SECURITY_BLOCK, 0);
    return;
  }

  p_hcon = &hh_cb.devices[i].conn;
  p_dev = &hh_cb.devices[i];

  /* Check we are in the correct state for this */
  if (psm == HID_PSM_INTERRUPT) {
    if (p_hcon->ctrl_cid == 0) {
      HIDH_TRACE_WARNING(
          "HID-Host Rcvd INTR L2CAP conn ind, but no CTL channel");
      bAccept = false;
    }
    if (p_hcon->conn_state != HID_CONN_STATE_CONNECTING_INTR) {
      HIDH_TRACE_WARNING("HID-Host Rcvd INTR L2CAP conn ind, wrong state: %d",
                         p_hcon->conn_state);
      bAccept = false;
    }
  } else /* CTRL channel */
  {
#if (HID_HOST_ACPT_NEW_CONN == TRUE)
    p_hcon->ctrl_cid = p_hcon->intr_cid = 0;
    p_hcon->conn_state = HID_CONN_STATE_UNUSED;
#else
    if (p_hcon->conn_state != HID_CONN_STATE_UNUSED) {
      HIDH_TRACE_WARNING("HID-Host - Rcvd CTL L2CAP conn ind, wrong state: %d",
                         p_hcon->conn_state);
      bAccept = false;
    }
#endif
  }

  if (!bAccept) {
    L2CA_ConnectRsp(bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_NO_RESOURCES, 0);
    return;
  }

  if (psm == HID_PSM_CONTROL) {
    p_hcon->conn_flags = 0;
    p_hcon->ctrl_cid = l2cap_cid;
    p_hcon->ctrl_id = l2cap_id;
    p_hcon->disc_reason = HID_L2CAP_CONN_FAIL; /* In case disconnection occurs
                                                  before security is completed,
                                                  then set CLOSE_EVT reason code
                                                  to 'connection failure' */

    p_hcon->conn_state = HID_CONN_STATE_SECURITY;
    if (btm_sec_mx_access_request(
            p_dev->addr, HID_PSM_CONTROL, false, BTM_SEC_PROTO_HID,
            (p_dev->attr_mask & HID_SEC_REQUIRED) ? HID_SEC_CHN : HID_NOSEC_CHN,
            &hidh_sec_check_complete_term, p_dev) == BTM_CMD_STARTED) {
      L2CA_ConnectRsp(bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_PENDING,
                      L2CAP_CONN_OK);
    }

    return;
  }

  /* Transition to the next appropriate state, configuration */
  p_hcon->conn_state = HID_CONN_STATE_CONFIG;
  p_hcon->intr_cid = l2cap_cid;

  /* Send response to the L2CAP layer. */
  L2CA_ConnectRsp(bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_OK, L2CAP_CONN_OK);

  /* Send a Configuration Request. */
  L2CA_ConfigReq(l2cap_cid, &hh_cb.l2cap_cfg);

  HIDH_TRACE_EVENT(
      "HID-Host Rcvd L2CAP conn ind, sent config req, PSM: 0x%04x  CID 0x%x",
      psm, l2cap_cid);
}

void hidh_process_repage_timer_timeout(void* data) {
  uint8_t dhandle = PTR_TO_UINT(data);
  hidh_try_repage(dhandle);
}

/*******************************************************************************
 *
 * Function         hidh_try_repage
 *
 * Description      This function processes timeout (to page device).
 *
 * Returns          void
 *
 ******************************************************************************/
void hidh_try_repage(uint8_t dhandle) {
  tHID_HOST_DEV_CTB* device;

  hidh_conn_initiate(dhandle);

  device = &hh_cb.devices[dhandle];
  device->conn_tries++;

  hh_cb.callback(dhandle, device->addr, HID_HDEV_EVT_RETRYING,
                 device->conn_tries, NULL);
}

/*******************************************************************************
 *
 * Function         hidh_sec_check_complete_orig
 *
 * Description      This function checks to see if security procedures are being
 *                  carried out or not..
 *
 * Returns          void
 *
 ******************************************************************************/
void hidh_sec_check_complete_orig(UNUSED_ATTR const RawAddress* bd_addr,
                                  UNUSED_ATTR tBT_TRANSPORT transport,
                                  void* p_ref_data, uint8_t res) {
  tHID_HOST_DEV_CTB* p_dev = (tHID_HOST_DEV_CTB*)p_ref_data;
  uint8_t dhandle;

  // TODO(armansito): This kind of math to determine a device handle is way
  // too dirty and unnecessary. Why can't |p_dev| store it's handle?
  dhandle = (PTR_TO_UINT(p_dev) - PTR_TO_UINT(&(hh_cb.devices[0]))) /
            sizeof(tHID_HOST_DEV_CTB);
  if (res == BTM_SUCCESS && p_dev->conn.conn_state == HID_CONN_STATE_SECURITY) {
    HIDH_TRACE_EVENT("HID-Host Originator security pass.");
    p_dev->conn.disc_reason = HID_SUCCESS; /* Authentication passed. Reset
                                              disc_reason (from
                                              HID_ERR_AUTH_FAILED) */

    /* Transition to the next appropriate state, configuration */
    p_dev->conn.conn_state = HID_CONN_STATE_CONFIG;
    L2CA_ConfigReq(p_dev->conn.ctrl_cid, &hh_cb.l2cap_cfg);
    HIDH_TRACE_EVENT("HID-Host Got Control conn cnf, sent cfg req, CID: 0x%x",
                     p_dev->conn.ctrl_cid);
  }

  if (res != BTM_SUCCESS && p_dev->conn.conn_state == HID_CONN_STATE_SECURITY) {
#if (HID_HOST_MAX_CONN_RETRY > 0)
    if (res == BTM_DEVICE_TIMEOUT) {
      if (p_dev->conn_tries <= HID_HOST_MAX_CONN_RETRY) {
        hidh_conn_retry(dhandle);
        return;
      }
    }
#endif
    p_dev->conn.disc_reason =
        HID_ERR_AUTH_FAILED; /* Save reason for disconnecting */
    hidh_conn_disconnect(dhandle);
  }
}

/*******************************************************************************
 *
 * Function         hidh_l2cif_connect_cfm
 *
 * Description      This function handles the connect confirm events
 *                  from L2CAP. This is the case when we are acting as a
 *                  client and have sent a connect request.
 *
 * Returns          void
 *
 ******************************************************************************/
static void hidh_l2cif_connect_cfm(uint16_t l2cap_cid, uint16_t result) {
  uint8_t dhandle;
  tHID_CONN* p_hcon = NULL;
  uint32_t reason;
  tHID_HOST_DEV_CTB* p_dev = NULL;

  /* Find CCB based on CID, and verify we are in a state to accept this message
   */
  dhandle = find_conn_by_cid(l2cap_cid);
  if (dhandle < HID_HOST_MAX_DEVICES) {
    p_dev = &hh_cb.devices[dhandle];
    p_hcon = &hh_cb.devices[dhandle].conn;
  }

  if ((p_hcon == NULL) || (!(p_hcon->conn_flags & HID_CONN_FLAGS_IS_ORIG)) ||
      ((l2cap_cid == p_hcon->ctrl_cid) &&
       (p_hcon->conn_state != HID_CONN_STATE_CONNECTING_CTRL)) ||
      ((l2cap_cid == p_hcon->intr_cid) &&
       (p_hcon->conn_state != HID_CONN_STATE_CONNECTING_INTR) &&
       (p_hcon->conn_state != HID_CONN_STATE_DISCONNECTING))) {
    HIDH_TRACE_WARNING("HID-Host Rcvd unexpected conn cnf, CID 0x%x ",
                       l2cap_cid);
    return;
  }

  if (result != L2CAP_CONN_OK) {
    if (l2cap_cid == p_hcon->ctrl_cid)
      p_hcon->ctrl_cid = 0;
    else
      p_hcon->intr_cid = 0;

    hidh_conn_disconnect(dhandle);

#if (HID_HOST_MAX_CONN_RETRY > 0)
    if ((hh_cb.devices[dhandle].conn_tries <= HID_HOST_MAX_CONN_RETRY) &&
        (result == HCI_ERR_CONNECTION_TOUT || result == HCI_ERR_UNSPECIFIED ||
         result == HCI_ERR_PAGE_TIMEOUT)) {
      hidh_conn_retry(dhandle);
    } else
#endif
    {
      reason = HID_L2CAP_CONN_FAIL | (uint32_t)result;
      hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE,
                     reason, NULL);
    }
    return;
  }
  /* receive Control Channel connect confirmation */
  if (l2cap_cid == p_hcon->ctrl_cid) {
    /* check security requirement */
    p_hcon->conn_state = HID_CONN_STATE_SECURITY;
    p_hcon->disc_reason = HID_L2CAP_CONN_FAIL; /* In case disconnection occurs
                                                  before security is completed,
                                                  then set CLOSE_EVT reason code
                                                  to "connection failure" */

    btm_sec_mx_access_request(
        p_dev->addr, HID_PSM_CONTROL, true, BTM_SEC_PROTO_HID,
        (p_dev->attr_mask & HID_SEC_REQUIRED) ? HID_SEC_CHN : HID_NOSEC_CHN,
        &hidh_sec_check_complete_orig, p_dev);
  } else {
    p_hcon->conn_state = HID_CONN_STATE_CONFIG;
    /* Send a Configuration Request. */
    L2CA_ConfigReq(l2cap_cid, &hh_cb.l2cap_cfg);
    HIDH_TRACE_EVENT("HID-Host got Interrupt conn cnf, sent cfg req, CID: 0x%x",
                     l2cap_cid);
  }

  return;
}

/*******************************************************************************
 *
 * Function         hidh_l2cif_config_ind
 *
 * Description      This function processes the L2CAP configuration indication
 *                  event.
 *
 * Returns          void
 *
 ******************************************************************************/
static void hidh_l2cif_config_ind(uint16_t l2cap_cid, tL2CAP_CFG_INFO* p_cfg) {
  uint8_t dhandle;
  tHID_CONN* p_hcon = NULL;
  uint32_t reason;

  /* Find CCB based on CID */
  dhandle = find_conn_by_cid(l2cap_cid);
  if (dhandle < HID_HOST_MAX_DEVICES) {
    p_hcon = &hh_cb.devices[dhandle].conn;
  }

  if (p_hcon == NULL) {
    HIDH_TRACE_WARNING("HID-Host Rcvd L2CAP cfg ind, unknown CID: 0x%x",
                       l2cap_cid);
    return;
  }

  HIDH_TRACE_EVENT("HID-Host Rcvd cfg ind, sent cfg cfm, CID: 0x%x", l2cap_cid);

  /* Remember the remote MTU size */
  if ((!p_cfg->mtu_present) || (p_cfg->mtu > HID_HOST_MTU))
    p_hcon->rem_mtu_size = HID_HOST_MTU;
  else
    p_hcon->rem_mtu_size = p_cfg->mtu;

  /* For now, always accept configuration from the other side */
  p_cfg->flush_to_present = false;
  p_cfg->mtu_present = false;
  p_cfg->result = L2CAP_CFG_OK;

  L2CA_ConfigRsp(l2cap_cid, p_cfg);

  if (l2cap_cid == p_hcon->ctrl_cid) {
    p_hcon->conn_flags |= HID_CONN_FLAGS_HIS_CTRL_CFG_DONE;
    if ((p_hcon->conn_flags & HID_CONN_FLAGS_IS_ORIG) &&
        (p_hcon->conn_flags & HID_CONN_FLAGS_MY_CTRL_CFG_DONE)) {
      /* Connect interrupt channel */
      p_hcon->disc_reason = HID_L2CAP_CONN_FAIL; /* Reset initial reason for
                                                    CLOSE_EVT: Connection
                                                    Attempt was made but failed
                                                    */
      p_hcon->intr_cid =
          L2CA_ConnectReq(HID_PSM_INTERRUPT, hh_cb.devices[dhandle].addr);
      if (p_hcon->intr_cid == 0) {
        HIDH_TRACE_WARNING("HID-Host INTR Originate failed");
        reason = HID_L2CAP_REQ_FAIL;
        p_hcon->conn_state = HID_CONN_STATE_UNUSED;
        hidh_conn_disconnect(dhandle);
        hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE,
                       reason, NULL);
        return;
      } else {
        /* Transition to the next appropriate state, waiting for connection
         * confirm on interrupt channel. */
        p_hcon->conn_state = HID_CONN_STATE_CONNECTING_INTR;
      }
    }
  } else
    p_hcon->conn_flags |= HID_CONN_FLAGS_HIS_INTR_CFG_DONE;

  /* If all configuration is complete, change state and tell management we are
   * up */
  if (((p_hcon->conn_flags & HID_CONN_FLAGS_ALL_CONFIGURED) ==
       HID_CONN_FLAGS_ALL_CONFIGURED) &&
      (p_hcon->conn_state == HID_CONN_STATE_CONFIG)) {
    p_hcon->conn_state = HID_CONN_STATE_CONNECTED;
    /* Reset disconnect reason to success, as connection successful */
    p_hcon->disc_reason = HID_SUCCESS;

    hh_cb.devices[dhandle].state = HID_DEV_CONNECTED;
    hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_OPEN, 0,
                   NULL);
  }
}

/*******************************************************************************
 *
 * Function         hidh_l2cif_config_cfm
 *
 * Description      This function processes the L2CAP configuration confirmation
 *                  event.
 *
 * Returns          void
 *
 ******************************************************************************/
static void hidh_l2cif_config_cfm(uint16_t l2cap_cid, tL2CAP_CFG_INFO* p_cfg) {
  uint8_t dhandle;
  tHID_CONN* p_hcon = NULL;
  uint32_t reason;

  HIDH_TRACE_EVENT("HID-Host Rcvd cfg cfm, CID: 0x%x  Result: %d", l2cap_cid,
                   p_cfg->result);

  /* Find CCB based on CID */
  dhandle = find_conn_by_cid(l2cap_cid);
  if (dhandle < HID_HOST_MAX_DEVICES) p_hcon = &hh_cb.devices[dhandle].conn;

  if (p_hcon == NULL) {
    HIDH_TRACE_WARNING("HID-Host Rcvd L2CAP cfg ind, unknown CID: 0x%x",
                       l2cap_cid);
    return;
  }

  /* If configuration failed, disconnect the channel(s) */
  if (p_cfg->result != L2CAP_CFG_OK) {
    hidh_conn_disconnect(dhandle);
    reason = HID_L2CAP_CFG_FAIL | (uint32_t)p_cfg->result;
    hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE,
                   reason, NULL);
    return;
  }

  if (l2cap_cid == p_hcon->ctrl_cid) {
    p_hcon->conn_flags |= HID_CONN_FLAGS_MY_CTRL_CFG_DONE;
    if ((p_hcon->conn_flags & HID_CONN_FLAGS_IS_ORIG) &&
        (p_hcon->conn_flags & HID_CONN_FLAGS_HIS_CTRL_CFG_DONE)) {
      /* Connect interrupt channel */
      p_hcon->disc_reason = HID_L2CAP_CONN_FAIL; /* Reset initial reason for
                                                    CLOSE_EVT: Connection
                                                    Attempt was made but failed
                                                    */
      p_hcon->intr_cid =
          L2CA_ConnectReq(HID_PSM_INTERRUPT, hh_cb.devices[dhandle].addr);
      if (p_hcon->intr_cid == 0) {
        HIDH_TRACE_WARNING("HID-Host INTR Originate failed");
        reason = HID_L2CAP_REQ_FAIL;
        p_hcon->conn_state = HID_CONN_STATE_UNUSED;
        hidh_conn_disconnect(dhandle);
        hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE,
                       reason, NULL);
        return;
      } else {
        /* Transition to the next appropriate state, waiting for connection
         * confirm on interrupt channel. */
        p_hcon->conn_state = HID_CONN_STATE_CONNECTING_INTR;
      }
    }
  } else
    p_hcon->conn_flags |= HID_CONN_FLAGS_MY_INTR_CFG_DONE;

  /* If all configuration is complete, change state and tell management we are
   * up */
  if (((p_hcon->conn_flags & HID_CONN_FLAGS_ALL_CONFIGURED) ==
       HID_CONN_FLAGS_ALL_CONFIGURED) &&
      (p_hcon->conn_state == HID_CONN_STATE_CONFIG)) {
    p_hcon->conn_state = HID_CONN_STATE_CONNECTED;
    /* Reset disconnect reason to success, as connection successful */
    p_hcon->disc_reason = HID_SUCCESS;

    hh_cb.devices[dhandle].state = HID_DEV_CONNECTED;
    hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_OPEN, 0,
                   NULL);
  }
}

/*******************************************************************************
 *
 * Function         hidh_l2cif_disconnect_ind
 *
 * Description      This function handles a disconnect event from L2CAP. If
 *                  requested to, we ack the disconnect before dropping the CCB
 *
 * Returns          void
 *
 ******************************************************************************/
static void hidh_l2cif_disconnect_ind(uint16_t l2cap_cid, bool ack_needed) {
  uint8_t dhandle;
  tHID_CONN* p_hcon = NULL;
  uint16_t disc_res = HCI_SUCCESS;
  uint16_t hid_close_evt_reason;

  /* Find CCB based on CID */
  dhandle = find_conn_by_cid(l2cap_cid);
  if (dhandle < HID_HOST_MAX_DEVICES) p_hcon = &hh_cb.devices[dhandle].conn;

  if (p_hcon == NULL) {
    HIDH_TRACE_WARNING("HID-Host Rcvd L2CAP disc, unknown CID: 0x%x",
                       l2cap_cid);
    return;
  }

  if (ack_needed) L2CA_DisconnectRsp(l2cap_cid);

  HIDH_TRACE_EVENT("HID-Host Rcvd L2CAP disc, CID: 0x%x", l2cap_cid);

  p_hcon->conn_state = HID_CONN_STATE_DISCONNECTING;

  if (l2cap_cid == p_hcon->ctrl_cid)
    p_hcon->ctrl_cid = 0;
  else
    p_hcon->intr_cid = 0;

  if ((p_hcon->ctrl_cid == 0) && (p_hcon->intr_cid == 0)) {
    hh_cb.devices[dhandle].state = HID_DEV_NO_CONN;
    p_hcon->conn_state = HID_CONN_STATE_UNUSED;

    if (!ack_needed) disc_res = btm_get_acl_disc_reason_code();

#if (HID_HOST_MAX_CONN_RETRY > 0)
    if ((disc_res == HCI_ERR_CONNECTION_TOUT ||
         disc_res == HCI_ERR_UNSPECIFIED) &&
        (!(hh_cb.devices[dhandle].attr_mask & HID_RECONN_INIT)) &&
        (hh_cb.devices[dhandle].attr_mask & HID_NORMALLY_CONNECTABLE)) {
      hh_cb.devices[dhandle].conn_tries = 0;
      uint64_t interval_ms = HID_HOST_REPAGE_WIN * 1000;
      alarm_set_on_mloop(hh_cb.devices[dhandle].conn.process_repage_timer,
                         interval_ms, hidh_process_repage_timer_timeout,
                         UINT_TO_PTR(dhandle));
      hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE,
                     disc_res, NULL);
    } else
#endif
    {
      /* Set reason code for HID_HDEV_EVT_CLOSE */
      hid_close_evt_reason = p_hcon->disc_reason;

      /* If we got baseband sent HCI_DISCONNECT_COMPLETE_EVT due to security
       * failure, then set reason to HID_ERR_AUTH_FAILED */
      if ((disc_res == HCI_ERR_AUTH_FAILURE) ||
          (disc_res == HCI_ERR_KEY_MISSING) ||
          (disc_res == HCI_ERR_HOST_REJECT_SECURITY) ||
          (disc_res == HCI_ERR_PAIRING_NOT_ALLOWED) ||
          (disc_res == HCI_ERR_UNIT_KEY_USED) ||
          (disc_res == HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED) ||
          (disc_res == HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE) ||
          (disc_res == HCI_ERR_REPEATED_ATTEMPTS)) {
        hid_close_evt_reason = HID_ERR_AUTH_FAILED;
      }

      hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE,
                     hid_close_evt_reason, NULL);
    }
  }
}

/*******************************************************************************
 *
 * Function         hidh_l2cif_disconnect_cfm
 *
 * Description      This function handles a disconnect confirm event from L2CAP.
 *
 * Returns          void
 *
 ******************************************************************************/
static void hidh_l2cif_disconnect_cfm(uint16_t l2cap_cid,
                                      UNUSED_ATTR uint16_t result) {
  uint8_t dhandle;
  tHID_CONN* p_hcon = NULL;

  /* Find CCB based on CID */
  dhandle = find_conn_by_cid(l2cap_cid);
  if (dhandle < HID_HOST_MAX_DEVICES) p_hcon = &hh_cb.devices[dhandle].conn;

  if (p_hcon == NULL) {
    HIDH_TRACE_WARNING("HID-Host Rcvd L2CAP disc cfm, unknown CID: 0x%x",
                       l2cap_cid);
    return;
  }

  HIDH_TRACE_EVENT("HID-Host Rcvd L2CAP disc cfm, CID: 0x%x", l2cap_cid);

  if (l2cap_cid == p_hcon->ctrl_cid)
    p_hcon->ctrl_cid = 0;
  else {
    p_hcon->intr_cid = 0;
    if (p_hcon->ctrl_cid) {
      HIDH_TRACE_EVENT("HID-Host Initiating L2CAP Ctrl disconnection");
      L2CA_DisconnectReq(p_hcon->ctrl_cid);
    }
  }

  if ((p_hcon->ctrl_cid == 0) && (p_hcon->intr_cid == 0)) {
    hh_cb.devices[dhandle].state = HID_DEV_NO_CONN;
    p_hcon->conn_state = HID_CONN_STATE_UNUSED;
    hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE,
                   p_hcon->disc_reason, NULL);
  }
}

/*******************************************************************************
 *
 * Function         hidh_l2cif_cong_ind
 *
 * Description      This function handles a congestion status event from L2CAP.
 *
 * Returns          void
 *
 ******************************************************************************/
static void hidh_l2cif_cong_ind(uint16_t l2cap_cid, bool congested) {
  uint8_t dhandle;
  tHID_CONN* p_hcon = NULL;

  /* Find CCB based on CID */
  dhandle = find_conn_by_cid(l2cap_cid);
  if (dhandle < HID_HOST_MAX_DEVICES) p_hcon = &hh_cb.devices[dhandle].conn;

  if (p_hcon == NULL) {
    HIDH_TRACE_WARNING(
        "HID-Host Rcvd L2CAP congestion status, unknown CID: 0x%x", l2cap_cid);
    return;
  }

  HIDH_TRACE_EVENT("HID-Host Rcvd L2CAP congestion status, CID: 0x%x  Cong: %d",
                   l2cap_cid, congested);

  if (congested)
    p_hcon->conn_flags |= HID_CONN_FLAGS_CONGESTED;
  else {
    p_hcon->conn_flags &= ~HID_CONN_FLAGS_CONGESTED;
  }
}

/*******************************************************************************
 *
 * Function         hidh_l2cif_data_ind
 *
 * Description      This function is called when data is received from L2CAP.
 *                  if we are the originator of the connection, we are the SDP
 *                  client, and the received message is queued up for the
 *                  client.
 *
 *                  If we are the destination of the connection, we are the SDP
 *                  server, so the message is passed to the server processing
 *                  function.
 *
 * Returns          void
 *
 ******************************************************************************/
static void hidh_l2cif_data_ind(uint16_t l2cap_cid, BT_HDR* p_msg) {
  uint8_t* p_data = (uint8_t*)(p_msg + 1) + p_msg->offset;
  uint8_t ttype, param, rep_type, evt;
  uint8_t dhandle;
  tHID_CONN* p_hcon = NULL;

  HIDH_TRACE_DEBUG("HID-Host hidh_l2cif_data_ind [l2cap_cid=0x%04x]",
                   l2cap_cid);

  /* Find CCB based on CID */
  dhandle = find_conn_by_cid(l2cap_cid);
  if (dhandle < HID_HOST_MAX_DEVICES) p_hcon = &hh_cb.devices[dhandle].conn;

  if (p_hcon == NULL) {
    HIDH_TRACE_WARNING("HID-Host Rcvd L2CAP data, unknown CID: 0x%x",
                       l2cap_cid);
    osi_free(p_msg);
    return;
  }

  if (p_msg->len < 1) {
    HIDH_TRACE_WARNING("Rcvd L2CAP data, invalid length %d, should be >= 1",
                       p_msg->len);
    osi_free(p_msg);
    android_errorWriteLog(0x534e4554, "80493272");
    return;
  }

  ttype = HID_GET_TRANS_FROM_HDR(*p_data);
  param = HID_GET_PARAM_FROM_HDR(*p_data);
  rep_type = param & HID_PAR_REP_TYPE_MASK;
  p_data++;

  /* Get rid of the data type */
  p_msg->len--;
  p_msg->offset++;

  switch (ttype) {
    case HID_TRANS_HANDSHAKE:
      hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr,
                     HID_HDEV_EVT_HANDSHAKE, param, NULL);
      osi_free(p_msg);
      break;

    case HID_TRANS_CONTROL:
      switch (param) {
        case HID_PAR_CONTROL_VIRTUAL_CABLE_UNPLUG:
          hidh_conn_disconnect(dhandle);
          /* Device is unplugging from us. Tell USB */
          hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr,
                         HID_HDEV_EVT_VC_UNPLUG, 0, NULL);
          break;

        default:
          break;
      }
      osi_free(p_msg);
      break;

    case HID_TRANS_DATA:
      evt = (hh_cb.devices[dhandle].conn.intr_cid == l2cap_cid)
                ? HID_HDEV_EVT_INTR_DATA
                : HID_HDEV_EVT_CTRL_DATA;
      hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, evt, rep_type,
                     p_msg);
      break;

    case HID_TRANS_DATAC:
      evt = (hh_cb.devices[dhandle].conn.intr_cid == l2cap_cid)
                ? HID_HDEV_EVT_INTR_DATC
                : HID_HDEV_EVT_CTRL_DATC;
      hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, evt, rep_type,
                     p_msg);
      break;

    default:
      osi_free(p_msg);
      break;
  }
}

/*******************************************************************************
 *
 * Function         hidh_conn_snd_data
 *
 * Description      This function is sends out data.
 *
 * Returns          tHID_STATUS
 *
 ******************************************************************************/
tHID_STATUS hidh_conn_snd_data(uint8_t dhandle, uint8_t trans_type,
                               uint8_t param, uint16_t data, uint8_t report_id,
                               BT_HDR* buf) {
  tHID_CONN* p_hcon = &hh_cb.devices[dhandle].conn;
  BT_HDR* p_buf;
  uint8_t* p_out;
  uint16_t bytes_copied;
  bool seg_req = false;
  uint16_t data_size;
  uint16_t cid;
  uint16_t buf_size;
  uint8_t use_data = 0;
  bool blank_datc = false;

  if (!BTM_IsAclConnectionUp(hh_cb.devices[dhandle].addr,
                             BT_TRANSPORT_BR_EDR)) {
    osi_free(buf);
    return HID_ERR_NO_CONNECTION;
  }

  if (p_hcon->conn_flags & HID_CONN_FLAGS_CONGESTED) {
    osi_free(buf);
    return HID_ERR_CONGESTED;
  }

  switch (trans_type) {
    case HID_TRANS_CONTROL:
    case HID_TRANS_GET_REPORT:
    case HID_TRANS_SET_REPORT:
    case HID_TRANS_GET_PROTOCOL:
    case HID_TRANS_SET_PROTOCOL:
    case HID_TRANS_GET_IDLE:
    case HID_TRANS_SET_IDLE:
      cid = p_hcon->ctrl_cid;
      buf_size = HID_CONTROL_BUF_SIZE;
      break;
    case HID_TRANS_DATA:
      cid = p_hcon->intr_cid;
      buf_size = HID_INTERRUPT_BUF_SIZE;
      break;
    default:
      return (HID_ERR_INVALID_PARAM);
  }

  if (trans_type == HID_TRANS_SET_IDLE)
    use_data = 1;
  else if ((trans_type == HID_TRANS_GET_REPORT) && (param & 0x08))
    use_data = 2;

  do {
    if (buf == NULL || blank_datc) {
      p_buf = (BT_HDR*)osi_malloc(buf_size);

      p_buf->offset = L2CAP_MIN_OFFSET;
      seg_req = false;
      data_size = 0;
      bytes_copied = 0;
      blank_datc = false;
    } else if ((buf->len > (p_hcon->rem_mtu_size - 1))) {
      p_buf = (BT_HDR*)osi_malloc(buf_size);

      p_buf->offset = L2CAP_MIN_OFFSET;
      seg_req = true;
      data_size = buf->len;
      bytes_copied = p_hcon->rem_mtu_size - 1;
    } else {
      p_buf = buf;
      p_buf->offset -= 1;
      seg_req = false;
      data_size = buf->len;
      bytes_copied = buf->len;
    }

    p_out = (uint8_t*)(p_buf + 1) + p_buf->offset;
    *p_out++ = HID_BUILD_HDR(trans_type, param);

    /* If report ID required for this device */
    if ((trans_type == HID_TRANS_GET_REPORT) && (report_id != 0)) {
      *p_out = report_id;
      data_size = bytes_copied = 1;
    }

    if (seg_req) {
      memcpy(p_out, (((uint8_t*)(buf + 1)) + buf->offset), bytes_copied);
      buf->offset += bytes_copied;
      buf->len -= bytes_copied;
    } else if (use_data == 1) {
      *(p_out + bytes_copied) = data & 0xff;
    } else if (use_data == 2) {
      *(p_out + bytes_copied) = data & 0xff;
      *(p_out + bytes_copied + 1) = (data >> 8) & 0xff;
    }

    p_buf->len = bytes_copied + 1 + use_data;
    data_size -= bytes_copied;

    /* Send the buffer through L2CAP */
    if ((p_hcon->conn_flags & HID_CONN_FLAGS_CONGESTED) ||
        (!L2CA_DataWrite(cid, p_buf)))
      return (HID_ERR_CONGESTED);

    if (data_size)
      trans_type = HID_TRANS_DATAC;
    else if (bytes_copied == (p_hcon->rem_mtu_size - 1)) {
      trans_type = HID_TRANS_DATAC;
      blank_datc = true;
    }

  } while ((data_size != 0) || blank_datc);

  return (HID_SUCCESS);
}
/*******************************************************************************
 *
 * Function         hidh_conn_initiate
 *
 * Description      This function is called by the management to create a
 *                  connection.
 *
 * Returns          void
 *
 ******************************************************************************/
tHID_STATUS hidh_conn_initiate(uint8_t dhandle) {
  uint8_t service_id = BTM_SEC_SERVICE_HIDH_NOSEC_CTRL;
  uint32_t mx_chan_id = HID_NOSEC_CHN;

  tHID_HOST_DEV_CTB* p_dev = &hh_cb.devices[dhandle];

  if (p_dev->conn.conn_state != HID_CONN_STATE_UNUSED)
    return (HID_ERR_CONN_IN_PROCESS);

  p_dev->conn.ctrl_cid = 0;
  p_dev->conn.intr_cid = 0;
  p_dev->conn.disc_reason =
      HID_L2CAP_CONN_FAIL; /* Reset initial reason for CLOSE_EVT: Connection
                              Attempt was made but failed */

  /* We are the originator of this connection */
  p_dev->conn.conn_flags = HID_CONN_FLAGS_IS_ORIG;

  if (p_dev->attr_mask & HID_SEC_REQUIRED) {
    service_id = BTM_SEC_SERVICE_HIDH_SEC_CTRL;
    mx_chan_id = HID_SEC_CHN;
  }
  BTM_SetOutService(p_dev->addr, service_id, mx_chan_id);

  /* Check if L2CAP started the connection process */
  p_dev->conn.ctrl_cid = L2CA_ConnectReq(HID_PSM_CONTROL, p_dev->addr);
  if (p_dev->conn.ctrl_cid == 0) {
    HIDH_TRACE_WARNING("HID-Host Originate failed");
    hh_cb.callback(dhandle, hh_cb.devices[dhandle].addr, HID_HDEV_EVT_CLOSE,
                   HID_ERR_L2CAP_FAILED, NULL);
  } else {
    /* Transition to the next appropriate state, waiting for connection confirm
     * on control channel. */
    p_dev->conn.conn_state = HID_CONN_STATE_CONNECTING_CTRL;
  }

  return (HID_SUCCESS);
}

/*******************************************************************************
 *
 * Function         find_conn_by_cid
 *
 * Description      This function finds a connection control block based on CID
 *
 * Returns          address of control block, or NULL if not found
 *
 ******************************************************************************/
static uint8_t find_conn_by_cid(uint16_t cid) {
  uint8_t xx;

  for (xx = 0; xx < HID_HOST_MAX_DEVICES; xx++) {
    if ((hh_cb.devices[xx].in_use) &&
        (hh_cb.devices[xx].conn.conn_state != HID_CONN_STATE_UNUSED) &&
        ((hh_cb.devices[xx].conn.ctrl_cid == cid) ||
         (hh_cb.devices[xx].conn.intr_cid == cid)))
      break;
  }

  return (xx);
}

void hidh_conn_dereg(void) {
  L2CA_Deregister(HID_PSM_CONTROL);
  L2CA_Deregister(HID_PSM_INTERRUPT);
}

/*******************************************************************************
 *
 * Function         hidh_conn_retry
 *
 * Description      This function is called to retry a failed connection.
 *
 * Returns          void
 *
 ******************************************************************************/
static void hidh_conn_retry(uint8_t dhandle) {
  tHID_HOST_DEV_CTB* p_dev = &hh_cb.devices[dhandle];

  p_dev->conn.conn_state = HID_CONN_STATE_UNUSED;
#if (HID_HOST_REPAGE_WIN > 0)
  uint64_t interval_ms = HID_HOST_REPAGE_WIN * 1000;
  alarm_set_on_mloop(p_dev->conn.process_repage_timer, interval_ms,
                     hidh_process_repage_timer_timeout, UINT_TO_PTR(dhandle));
#else
  hidh_try_repage(dhandle);
#endif
}