/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Linux driver for Disk-On-Chip devices
 *
 * Copyright © 1999 Machine Vision Holdings, Inc.
 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
 * Copyright © 2002-2003 Greg Ungerer <gerg@snapgear.com>
 * Copyright © 2002-2003 SnapGear Inc
 *
 */

#ifndef __MTD_DOC2000_H__
#define __MTD_DOC2000_H__

#include <linux/mtd/mtd.h>
#if 0
#include <linux/mutex.h>
#endif

#define DoC_Sig1 0
#define DoC_Sig2 1

#define DoC_ChipID		0x1000
#define DoC_DOCStatus		0x1001
#define DoC_DOCControl		0x1002
#define DoC_FloorSelect		0x1003
#define DoC_CDSNControl		0x1004
#define DoC_CDSNDeviceSelect	0x1005
#define DoC_ECCConf		0x1006
#define DoC_2k_ECCStatus	0x1007

#define DoC_CDSNSlowIO		0x100d
#define DoC_ECCSyndrome0	0x1010
#define DoC_ECCSyndrome1	0x1011
#define DoC_ECCSyndrome2	0x1012
#define DoC_ECCSyndrome3	0x1013
#define DoC_ECCSyndrome4	0x1014
#define DoC_ECCSyndrome5	0x1015
#define DoC_AliasResolution	0x101b
#define DoC_ConfigInput		0x101c
#define DoC_ReadPipeInit	0x101d
#define DoC_WritePipeTerm	0x101e
#define DoC_LastDataRead	0x101f
#define DoC_NOP			0x1020

#define DoC_Mil_CDSN_IO		0x0800
#define DoC_2k_CDSN_IO		0x1800

#define DoC_Mplus_NOP			0x1002
#define DoC_Mplus_AliasResolution	0x1004
#define DoC_Mplus_DOCControl		0x1006
#define DoC_Mplus_AccessStatus		0x1008
#define DoC_Mplus_DeviceSelect		0x1008
#define DoC_Mplus_Configuration		0x100a
#define DoC_Mplus_OutputControl		0x100c
#define DoC_Mplus_FlashControl		0x1020
#define DoC_Mplus_FlashSelect 		0x1022
#define DoC_Mplus_FlashCmd		0x1024
#define DoC_Mplus_FlashAddress		0x1026
#define DoC_Mplus_FlashData0		0x1028
#define DoC_Mplus_FlashData1		0x1029
#define DoC_Mplus_ReadPipeInit		0x102a
#define DoC_Mplus_LastDataRead		0x102c
#define DoC_Mplus_LastDataRead1		0x102d
#define DoC_Mplus_WritePipeTerm 	0x102e
#define DoC_Mplus_ECCSyndrome0		0x1040
#define DoC_Mplus_ECCSyndrome1		0x1041
#define DoC_Mplus_ECCSyndrome2		0x1042
#define DoC_Mplus_ECCSyndrome3		0x1043
#define DoC_Mplus_ECCSyndrome4		0x1044
#define DoC_Mplus_ECCSyndrome5		0x1045
#define DoC_Mplus_ECCConf 		0x1046
#define DoC_Mplus_Toggle		0x1046
#define DoC_Mplus_DownloadStatus	0x1074
#define DoC_Mplus_CtrlConfirm		0x1076
#define DoC_Mplus_Power			0x1fff

/* How to access the device?
 * On ARM, it'll be mmap'd directly with 32-bit wide accesses.
 * On PPC, it's mmap'd and 16-bit wide.
 * Others use readb/writeb
 */
#if defined(__arm__)
#define ReadDOC_(adr, reg)      ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2))))
#define WriteDOC_(d, adr, reg)  do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0)
#define DOC_IOREMAP_LEN 0x8000
#elif defined(__ppc__)
#define ReadDOC_(adr, reg)      ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1))))
#define WriteDOC_(d, adr, reg)  do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0)
#define DOC_IOREMAP_LEN 0x4000
#else
#define ReadDOC_(adr, reg)      readb((void __iomem *)(adr) + (reg))
#define WriteDOC_(d, adr, reg)  writeb(d, (void __iomem *)(adr) + (reg))
#define DOC_IOREMAP_LEN 0x2000

#endif

#if defined(__i386__) || defined(__x86_64__)
#define USE_MEMCPY
#endif

/* These are provided to directly use the DoC_xxx defines */
#define ReadDOC(adr, reg)      ReadDOC_(adr,DoC_##reg)
#define WriteDOC(d, adr, reg)  WriteDOC_(d,adr,DoC_##reg)

#define DOC_MODE_RESET		0
#define DOC_MODE_NORMAL		1
#define DOC_MODE_RESERVED1	2
#define DOC_MODE_RESERVED2	3

#define DOC_MODE_CLR_ERR	0x80
#define	DOC_MODE_RST_LAT	0x10
#define	DOC_MODE_BDECT		0x08
#define DOC_MODE_MDWREN	0x04

#define DOC_ChipID_Doc2k	0x20
#define DOC_ChipID_Doc2kTSOP	0x21	/* internal number for MTD */
#define DOC_ChipID_DocMil	0x30
#define DOC_ChipID_DocMilPlus32	0x40
#define DOC_ChipID_DocMilPlus16	0x41

#define CDSN_CTRL_FR_B		0x80
#define CDSN_CTRL_FR_B0		0x40
#define CDSN_CTRL_FR_B1		0x80

#define CDSN_CTRL_ECC_IO	0x20
#define CDSN_CTRL_FLASH_IO	0x10
#define CDSN_CTRL_WP		0x08
#define CDSN_CTRL_ALE		0x04
#define CDSN_CTRL_CLE		0x02
#define CDSN_CTRL_CE		0x01

#define DOC_ECC_RESET		0
#define DOC_ECC_ERROR		0x80
#define DOC_ECC_RW		0x20
#define DOC_ECC__EN		0x08
#define DOC_TOGGLE_BIT		0x04
#define DOC_ECC_RESV		0x02
#define DOC_ECC_IGNORE		0x01

#define DOC_FLASH_CE		0x80
#define DOC_FLASH_WP		0x40
#define DOC_FLASH_BANK		0x02

/* We have to also set the reserved bit 1 for enable */
#define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV)
#define DOC_ECC_DIS (DOC_ECC_RESV)

struct Nand {
	char floor, chip;
	unsigned long curadr;
	unsigned char curmode;
	/* Also some erase/write/pipeline info when we get that far */
};

#define MAX_FLOORS 4
#define MAX_CHIPS 4

#define MAX_FLOORS_MIL 1
#define MAX_CHIPS_MIL 1

#define MAX_FLOORS_MPLUS 2
#define MAX_CHIPS_MPLUS 1

#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3

struct DiskOnChip {
	unsigned long physadr;
	void __iomem *virtadr;
	unsigned long totlen;
	unsigned char ChipID; /* Type of DiskOnChip */
	int ioreg;

	unsigned long mfr; /* Flash IDs - only one type of flash per device */
	unsigned long id;
	int chipshift;
	char page256;
	char pageadrlen;
	char interleave; /* Internal interleaving - Millennium Plus style */
	unsigned long erasesize;

	int curfloor;
	int curchip;

	int numchips;
	struct Nand *chips;
	struct mtd_info *nextdoc;
/* XXX U-BOOT XXX */
#if 0
	struct mutex lock;
#endif
};

int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]);

/* XXX U-BOOT XXX */
#if 1
/*
 * NAND Flash Manufacturer ID Codes
 */
#define NAND_MFR_TOSHIBA   0x98
#define NAND_MFR_SAMSUNG   0xec
#endif

#endif /* __MTD_DOC2000_H__ */