// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2001
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
*/
/*
* This provides a bit-banged interface to the ethernet MII management
* channel.
*/
#include <common.h>
#include <dm.h>
#include <miiphy.h>
#include <phy.h>
#include <asm/types.h>
#include <linux/list.h>
#include <malloc.h>
#include <net.h>
/* local debug macro */
#undef MII_DEBUG
#undef debug
#ifdef MII_DEBUG
#define debug(fmt, args...) printf(fmt, ##args)
#else
#define debug(fmt, args...)
#endif /* MII_DEBUG */
static struct list_head mii_devs;
static struct mii_dev *current_mii;
/*
* Lookup the mii_dev struct by the registered device name.
*/
struct mii_dev *miiphy_get_dev_by_name(const char *devname)
{
struct list_head *entry;
struct mii_dev *dev;
if (!devname) {
printf("NULL device name!\n");
return NULL;
}
list_for_each(entry, &mii_devs) {
dev = list_entry(entry, struct mii_dev, link);
if (strcmp(dev->name, devname) == 0)
return dev;
}
return NULL;
}
/*****************************************************************************
*
* Initialize global data. Need to be called before any other miiphy routine.
*/
void miiphy_init(void)
{
INIT_LIST_HEAD(&mii_devs);
current_mii = NULL;
}
struct mii_dev *mdio_alloc(void)
{
struct mii_dev *bus;
bus = malloc(sizeof(*bus));
if (!bus)
return bus;
memset(bus, 0, sizeof(*bus));
/* initalize mii_dev struct fields */
INIT_LIST_HEAD(&bus->link);
return bus;
}
void mdio_free(struct mii_dev *bus)
{
free(bus);
}
int mdio_register(struct mii_dev *bus)
{
if (!bus || !bus->read || !bus->write)
return -1;
/* check if we have unique name */
if (miiphy_get_dev_by_name(bus->name)) {
printf("mdio_register: non unique device name '%s'\n",
bus->name);
return -1;
}
/* add it to the list */
list_add_tail(&bus->link, &mii_devs);
if (!current_mii)
current_mii = bus;
return 0;
}
int mdio_register_seq(struct mii_dev *bus, int seq)
{
int ret;
/* Setup a unique name for each mdio bus */
ret = snprintf(bus->name, MDIO_NAME_LEN, "eth%d", seq);
if (ret < 0)
return ret;
return mdio_register(bus);
}
int mdio_unregister(struct mii_dev *bus)
{
if (!bus)
return 0;
/* delete it from the list */
list_del(&bus->link);
if (current_mii == bus)
current_mii = NULL;
return 0;
}
void mdio_list_devices(void)
{
struct list_head *entry;
list_for_each(entry, &mii_devs) {
int i;
struct mii_dev *bus = list_entry(entry, struct mii_dev, link);
printf("%s:\n", bus->name);
for (i = 0; i < PHY_MAX_ADDR; i++) {
struct phy_device *phydev = bus->phymap[i];
if (phydev) {
printf("%x - %s", i, phydev->drv->name);
if (phydev->dev)
printf(" <--> %s\n", phydev->dev->name);
else
printf("\n");
}
}
}
}
int miiphy_set_current_dev(const char *devname)
{
struct mii_dev *dev;
dev = miiphy_get_dev_by_name(devname);
if (dev) {
current_mii = dev;
return 0;
}
printf("No such device: %s\n", devname);
return 1;
}
struct mii_dev *mdio_get_current_dev(void)
{
return current_mii;
}
struct phy_device *mdio_phydev_for_ethname(const char *ethname)
{
struct list_head *entry;
struct mii_dev *bus;
list_for_each(entry, &mii_devs) {
int i;
bus = list_entry(entry, struct mii_dev, link);
for (i = 0; i < PHY_MAX_ADDR; i++) {
if (!bus->phymap[i] || !bus->phymap[i]->dev)
continue;
if (strcmp(bus->phymap[i]->dev->name, ethname) == 0)
return bus->phymap[i];
}
}
printf("%s is not a known ethernet\n", ethname);
return NULL;
}
const char *miiphy_get_current_dev(void)
{
if (current_mii)
return current_mii->name;
return NULL;
}
static struct mii_dev *miiphy_get_active_dev(const char *devname)
{
/* If the current mii is the one we want, return it */
if (current_mii)
if (strcmp(current_mii->name, devname) == 0)
return current_mii;
/* Otherwise, set the active one to the one we want */
if (miiphy_set_current_dev(devname))
return NULL;
else
return current_mii;
}
/*****************************************************************************
*
* Read to variable <value> from the PHY attached to device <devname>,
* use PHY address <addr> and register <reg>.
*
* This API is deprecated. Use phy_read on a phy_device found via phy_connect
*
* Returns:
* 0 on success
*/
int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
unsigned short *value)
{
struct mii_dev *bus;
int ret;
bus = miiphy_get_active_dev(devname);
if (!bus)
return 1;
ret = bus->read(bus, addr, MDIO_DEVAD_NONE, reg);
if (ret < 0)
return 1;
*value = (unsigned short)ret;
return 0;
}
/*****************************************************************************
*
* Write <value> to the PHY attached to device <devname>,
* use PHY address <addr> and register <reg>.
*
* This API is deprecated. Use phy_write on a phy_device found by phy_connect
*
* Returns:
* 0 on success
*/
int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
unsigned short value)
{
struct mii_dev *bus;
bus = miiphy_get_active_dev(devname);
if (bus)
return bus->write(bus, addr, MDIO_DEVAD_NONE, reg, value);
return 1;
}
/*****************************************************************************
*
* Print out list of registered MII capable devices.
*/
void miiphy_listdev(void)
{
struct list_head *entry;
struct mii_dev *dev;
puts("MII devices: ");
list_for_each(entry, &mii_devs) {
dev = list_entry(entry, struct mii_dev, link);
printf("'%s' ", dev->name);
}
puts("\n");
if (current_mii)
printf("Current device: '%s'\n", current_mii->name);
}
/*****************************************************************************
*
* Read the OUI, manufacture's model number, and revision number.
*
* OUI: 22 bits (unsigned int)
* Model: 6 bits (unsigned char)
* Revision: 4 bits (unsigned char)
*
* This API is deprecated.
*
* Returns:
* 0 on success
*/
int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui,
unsigned char *model, unsigned char *rev)
{
unsigned int reg = 0;
unsigned short tmp;
if (miiphy_read(devname, addr, MII_PHYSID2, &tmp) != 0) {
debug("PHY ID register 2 read failed\n");
return -1;
}
reg = tmp;
debug("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
if (reg == 0xFFFF) {
/* No physical device present at this address */
return -1;
}
if (miiphy_read(devname, addr, MII_PHYSID1, &tmp) != 0) {
debug("PHY ID register 1 read failed\n");
return -1;
}
reg |= tmp << 16;
debug("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
*oui = (reg >> 10);
*model = (unsigned char)((reg >> 4) & 0x0000003F);
*rev = (unsigned char)(reg & 0x0000000F);
return 0;
}
#ifndef CONFIG_PHYLIB
/*****************************************************************************
*
* Reset the PHY.
*
* This API is deprecated. Use PHYLIB.
*
* Returns:
* 0 on success
*/
int miiphy_reset(const char *devname, unsigned char addr)
{
unsigned short reg;
int timeout = 500;
if (miiphy_read(devname, addr, MII_BMCR, ®) != 0) {
debug("PHY status read failed\n");
return -1;
}
if (miiphy_write(devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
debug("PHY reset failed\n");
return -1;
}
#ifdef CONFIG_PHY_RESET_DELAY
udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */
#endif
/*
* Poll the control register for the reset bit to go to 0 (it is
* auto-clearing). This should happen within 0.5 seconds per the
* IEEE spec.
*/
reg = 0x8000;
while (((reg & 0x8000) != 0) && timeout--) {
if (miiphy_read(devname, addr, MII_BMCR, ®) != 0) {
debug("PHY status read failed\n");
return -1;
}
udelay(1000);
}
if ((reg & 0x8000) == 0) {
return 0;
} else {
puts("PHY reset timed out\n");
return -1;
}
return 0;
}
#endif /* !PHYLIB */
/*****************************************************************************
*
* Determine the ethernet speed (10/100/1000). Return 10 on error.
*/
int miiphy_speed(const char *devname, unsigned char addr)
{
u16 bmcr, anlpar, adv;
#if defined(CONFIG_PHY_GIGE)
u16 btsr;
/*
* Check for 1000BASE-X. If it is supported, then assume that the speed
* is 1000.
*/
if (miiphy_is_1000base_x(devname, addr))
return _1000BASET;
/*
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
*/
/* Check for 1000BASE-T. */
if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
printf("PHY 1000BT status");
goto miiphy_read_failed;
}
if (btsr != 0xFFFF &&
(btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)))
return _1000BASET;
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
printf("PHY speed");
goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
if (bmcr & BMCR_ANENABLE) {
/* Get auto-negotiation results. */
if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
printf("PHY AN speed");
goto miiphy_read_failed;
}
if (miiphy_read(devname, addr, MII_ADVERTISE, &adv)) {
puts("PHY AN adv speed");
goto miiphy_read_failed;
}
return ((anlpar & adv) & LPA_100) ? _100BASET : _10BASET;
}
/* Get speed from basic control settings. */
return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET;
miiphy_read_failed:
printf(" read failed, assuming 10BASE-T\n");
return _10BASET;
}
/*****************************************************************************
*
* Determine full/half duplex. Return half on error.
*/
int miiphy_duplex(const char *devname, unsigned char addr)
{
u16 bmcr, anlpar, adv;
#if defined(CONFIG_PHY_GIGE)
u16 btsr;
/* Check for 1000BASE-X. */
if (miiphy_is_1000base_x(devname, addr)) {
/* 1000BASE-X */
if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
printf("1000BASE-X PHY AN duplex");
goto miiphy_read_failed;
}
}
/*
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
*/
/* Check for 1000BASE-T. */
if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
printf("PHY 1000BT status");
goto miiphy_read_failed;
}
if (btsr != 0xFFFF) {
if (btsr & PHY_1000BTSR_1000FD) {
return FULL;
} else if (btsr & PHY_1000BTSR_1000HD) {
return HALF;
}
}
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
puts("PHY duplex");
goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
if (bmcr & BMCR_ANENABLE) {
/* Get auto-negotiation results. */
if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
puts("PHY AN duplex");
goto miiphy_read_failed;
}
if (miiphy_read(devname, addr, MII_ADVERTISE, &adv)) {
puts("PHY AN adv duplex");
goto miiphy_read_failed;
}
return ((anlpar & adv) & (LPA_10FULL | LPA_100FULL)) ?
FULL : HALF;
}
/* Get speed from basic control settings. */
return (bmcr & BMCR_FULLDPLX) ? FULL : HALF;
miiphy_read_failed:
printf(" read failed, assuming half duplex\n");
return HALF;
}
/*****************************************************************************
*
* Return 1 if PHY supports 1000BASE-X, 0 if PHY supports 10BASE-T/100BASE-TX/
* 1000BASE-T, or on error.
*/
int miiphy_is_1000base_x(const char *devname, unsigned char addr)
{
#if defined(CONFIG_PHY_GIGE)
u16 exsr;
if (miiphy_read(devname, addr, MII_ESTATUS, &exsr)) {
printf("PHY extended status read failed, assuming no "
"1000BASE-X\n");
return 0;
}
return 0 != (exsr & (ESTATUS_1000XF | ESTATUS_1000XH));
#else
return 0;
#endif
}
#ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
/*****************************************************************************
*
* Determine link status
*/
int miiphy_link(const char *devname, unsigned char addr)
{
unsigned short reg;
/* dummy read; needed to latch some phys */
(void)miiphy_read(devname, addr, MII_BMSR, ®);
if (miiphy_read(devname, addr, MII_BMSR, ®)) {
puts("MII_BMSR read failed, assuming no link\n");
return 0;
}
/* Determine if a link is active */
if ((reg & BMSR_LSTATUS) != 0) {
return 1;
} else {
return 0;
}
}
#endif