/*
* The copyright in this software is being made available under the 2-clauses
* BSD License, included below. This software may be subject to other third
* party and contributor rights, including patent rights, and no such rights
* are granted under this license.
*
* Copyright (c) 2002-2014, Universite catholique de Louvain (UCL), Belgium
* Copyright (c) 2002-2014, Professor Benoit Macq
* Copyright (c) 2001-2003, David Janssens
* Copyright (c) 2002-2003, Yannick Verschueren
* Copyright (c) 2003-2007, Francois-Olivier Devaux
* Copyright (c) 2003-2014, Antonin Descampe
* Copyright (c) 2005, Herve Drolon, FreeImage Team
* Copyright (c) 2012, Carl Hetherington
* Copyright (c) 2017, IntoPIX SA <support@intopix.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS `AS IS'
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef OPJ_T1_H
#define OPJ_T1_H
/**
@file t1.h
@brief Implementation of the tier-1 coding (coding of code-block coefficients) (T1)
The functions in T1.C have for goal to realize the tier-1 coding operation. The functions
in T1.C are used by some function in TCD.C.
*/
/** @defgroup T1 T1 - Implementation of the tier-1 coding */
/*@{*/
/* ----------------------------------------------------------------------- */
#define T1_NMSEDEC_BITS 7
#define T1_NUMCTXS_ZC 9
#define T1_NUMCTXS_SC 5
#define T1_NUMCTXS_MAG 3
#define T1_NUMCTXS_AGG 1
#define T1_NUMCTXS_UNI 1
#define T1_CTXNO_ZC 0
#define T1_CTXNO_SC (T1_CTXNO_ZC+T1_NUMCTXS_ZC)
#define T1_CTXNO_MAG (T1_CTXNO_SC+T1_NUMCTXS_SC)
#define T1_CTXNO_AGG (T1_CTXNO_MAG+T1_NUMCTXS_MAG)
#define T1_CTXNO_UNI (T1_CTXNO_AGG+T1_NUMCTXS_AGG)
#define T1_NUMCTXS (T1_CTXNO_UNI+T1_NUMCTXS_UNI)
#define T1_NMSEDEC_FRACBITS (T1_NMSEDEC_BITS-1)
#define T1_TYPE_MQ 0 /**< Normal coding using entropy coder */
#define T1_TYPE_RAW 1 /**< No encoding the information is store under raw format in codestream (mode switch RAW)*/
/* BEGINNING of flags that apply to opj_flag_t */
/** We hold the state of individual data points for the T1 encoder using
* a single 32-bit flags word to hold the state of 4 data points. This corresponds
* to the 4-point-high columns that the data is processed in.
*
* These \#defines declare the layout of a 32-bit flags word.
*
* This is currently done for encoding only.
* The values must NOT be changed, otherwise this is going to break a lot of
* assumptions.
*/
/* SIGMA: significance state (3 cols x 6 rows)
* CHI: state for negative sample value (1 col x 6 rows)
* MU: state for visited in refinement pass (1 col x 4 rows)
* PI: state for visited in significance pass (1 col * 4 rows)
*/
#define T1_SIGMA_0 (1U << 0)
#define T1_SIGMA_1 (1U << 1)
#define T1_SIGMA_2 (1U << 2)
#define T1_SIGMA_3 (1U << 3)
#define T1_SIGMA_4 (1U << 4)
#define T1_SIGMA_5 (1U << 5)
#define T1_SIGMA_6 (1U << 6)
#define T1_SIGMA_7 (1U << 7)
#define T1_SIGMA_8 (1U << 8)
#define T1_SIGMA_9 (1U << 9)
#define T1_SIGMA_10 (1U << 10)
#define T1_SIGMA_11 (1U << 11)
#define T1_SIGMA_12 (1U << 12)
#define T1_SIGMA_13 (1U << 13)
#define T1_SIGMA_14 (1U << 14)
#define T1_SIGMA_15 (1U << 15)
#define T1_SIGMA_16 (1U << 16)
#define T1_SIGMA_17 (1U << 17)
#define T1_CHI_0 (1U << 18)
#define T1_CHI_0_I 18
#define T1_CHI_1 (1U << 19)
#define T1_CHI_1_I 19
#define T1_MU_0 (1U << 20)
#define T1_PI_0 (1U << 21)
#define T1_CHI_2 (1U << 22)
#define T1_CHI_2_I 22
#define T1_MU_1 (1U << 23)
#define T1_PI_1 (1U << 24)
#define T1_CHI_3 (1U << 25)
#define T1_MU_2 (1U << 26)
#define T1_PI_2 (1U << 27)
#define T1_CHI_4 (1U << 28)
#define T1_MU_3 (1U << 29)
#define T1_PI_3 (1U << 30)
#define T1_CHI_5 (1U << 31)
#define T1_CHI_5_I 31
/** As an example, the bits T1_SIGMA_3, T1_SIGMA_4 and T1_SIGMA_5
* indicate the significance state of the west neighbour of data point zero
* of our four, the point itself, and its east neighbour respectively.
* Many of the bits are arranged so that given a flags word, you can
* look at the values for the data point 0, then shift the flags
* word right by 3 bits and look at the same bit positions to see the
* values for data point 1.
*
* The \#defines below help a bit with this; say you have a flags word
* f, you can do things like
*
* (f & T1_SIGMA_THIS)
*
* to see the significance bit of data point 0, then do
*
* ((f >> 3) & T1_SIGMA_THIS)
*
* to see the significance bit of data point 1.
*/
#define T1_SIGMA_NW T1_SIGMA_0
#define T1_SIGMA_N T1_SIGMA_1
#define T1_SIGMA_NE T1_SIGMA_2
#define T1_SIGMA_W T1_SIGMA_3
#define T1_SIGMA_THIS T1_SIGMA_4
#define T1_SIGMA_E T1_SIGMA_5
#define T1_SIGMA_SW T1_SIGMA_6
#define T1_SIGMA_S T1_SIGMA_7
#define T1_SIGMA_SE T1_SIGMA_8
#define T1_SIGMA_NEIGHBOURS (T1_SIGMA_NW | T1_SIGMA_N | T1_SIGMA_NE | T1_SIGMA_W | T1_SIGMA_E | T1_SIGMA_SW | T1_SIGMA_S | T1_SIGMA_SE)
#define T1_CHI_THIS T1_CHI_1
#define T1_CHI_THIS_I T1_CHI_1_I
#define T1_MU_THIS T1_MU_0
#define T1_PI_THIS T1_PI_0
#define T1_CHI_S T1_CHI_2
#define T1_LUT_SGN_W (1U << 0)
#define T1_LUT_SIG_N (1U << 1)
#define T1_LUT_SGN_E (1U << 2)
#define T1_LUT_SIG_W (1U << 3)
#define T1_LUT_SGN_N (1U << 4)
#define T1_LUT_SIG_E (1U << 5)
#define T1_LUT_SGN_S (1U << 6)
#define T1_LUT_SIG_S (1U << 7)
/* END of flags that apply to opj_flag_t */
/* ----------------------------------------------------------------------- */
/** Flags for 4 consecutive rows of a column */
typedef OPJ_UINT32 opj_flag_t;
/**
Tier-1 coding (coding of code-block coefficients)
*/
typedef struct opj_t1 {
/** MQC component */
opj_mqc_t mqc;
OPJ_INT32 *data;
/** Flags used by decoder and encoder.
* Such that flags[1+0] is for state of col=0,row=0..3,
flags[1+1] for col=1, row=0..3, flags[1+flags_stride] for col=0,row=4..7, ...
This array avoids too much cache trashing when processing by 4 vertical samples
as done in the various decoding steps. */
opj_flag_t *flags;
OPJ_UINT32 w;
OPJ_UINT32 h;
OPJ_UINT32 datasize;
OPJ_UINT32 flagssize;
OPJ_UINT32 data_stride;
OPJ_BOOL encoder;
/* Thre 3 variables below are only used by the decoder */
/* set to TRUE in multithreaded context */
OPJ_BOOL mustuse_cblkdatabuffer;
/* Temporary buffer to concatenate all chunks of a codebock */
OPJ_BYTE *cblkdatabuffer;
/* Maximum size available in cblkdatabuffer */
OPJ_UINT32 cblkdatabuffersize;
} opj_t1_t;
/** @name Exported functions */
/*@{*/
/* ----------------------------------------------------------------------- */
/**
Encode the code-blocks of a tile
@param t1 T1 handle
@param tile The tile to encode
@param tcp Tile coding parameters
@param mct_norms FIXME DOC
@param mct_numcomps Number of components used for MCT
*/
OPJ_BOOL opj_t1_encode_cblks(opj_t1_t *t1,
opj_tcd_tile_t *tile,
opj_tcp_t *tcp,
const OPJ_FLOAT64 * mct_norms,
OPJ_UINT32 mct_numcomps);
/**
Decode the code-blocks of a tile
@param tcd TCD handle
@param pret Pointer to return value
@param tilec The tile to decode
@param tccp Tile coding parameters
@param p_manager the event manager
@param p_manager_mutex mutex for the event manager
@param check_pterm whether PTERM correct termination should be checked
*/
void opj_t1_decode_cblks(opj_tcd_t* tcd,
volatile OPJ_BOOL* pret,
opj_tcd_tilecomp_t* tilec,
opj_tccp_t* tccp,
opj_event_mgr_t *p_manager,
opj_mutex_t* p_manager_mutex,
OPJ_BOOL check_pterm);
/**
* Creates a new Tier 1 handle
* and initializes the look-up tables of the Tier-1 coder/decoder
* @return a new T1 handle if successful, returns NULL otherwise
*/
opj_t1_t* opj_t1_create(OPJ_BOOL isEncoder);
/**
* Destroys a previously created T1 handle
*
* @param p_t1 Tier 1 handle to destroy
*/
void opj_t1_destroy(opj_t1_t *p_t1);
/* ----------------------------------------------------------------------- */
/*@}*/
/*@}*/
#endif /* OPJ_T1_H */