//===-- ARMConstantIslandPass.cpp - ARM constant islands ------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file contains a pass that splits the constant pool up into 'islands'
// which are scattered through-out the function. This is required due to the
// limited pc-relative displacements that ARM has.
//
//===----------------------------------------------------------------------===//
#include "ARM.h"
#include "ARMMachineFunctionInfo.h"
#include "MCTargetDesc/ARMAddressingModes.h"
#include "Thumb2InstrInfo.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/SmallSet.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/CodeGen/MachineConstantPool.h"
#include "llvm/CodeGen/MachineFunctionPass.h"
#include "llvm/CodeGen/MachineJumpTableInfo.h"
#include "llvm/CodeGen/MachineRegisterInfo.h"
#include "llvm/IR/DataLayout.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/Format.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetMachine.h"
#include <algorithm>
using namespace llvm;
#define DEBUG_TYPE "arm-cp-islands"
STATISTIC(NumCPEs, "Number of constpool entries");
STATISTIC(NumSplit, "Number of uncond branches inserted");
STATISTIC(NumCBrFixed, "Number of cond branches fixed");
STATISTIC(NumUBrFixed, "Number of uncond branches fixed");
STATISTIC(NumTBs, "Number of table branches generated");
STATISTIC(NumT2CPShrunk, "Number of Thumb2 constantpool instructions shrunk");
STATISTIC(NumT2BrShrunk, "Number of Thumb2 immediate branches shrunk");
STATISTIC(NumCBZ, "Number of CBZ / CBNZ formed");
STATISTIC(NumJTMoved, "Number of jump table destination blocks moved");
STATISTIC(NumJTInserted, "Number of jump table intermediate blocks inserted");
static cl::opt<bool>
AdjustJumpTableBlocks("arm-adjust-jump-tables", cl::Hidden, cl::init(true),
cl::desc("Adjust basic block layout to better use TB[BH]"));
static cl::opt<unsigned>
CPMaxIteration("arm-constant-island-max-iteration", cl::Hidden, cl::init(30),
cl::desc("The max number of iteration for converge"));
/// UnknownPadding - Return the worst case padding that could result from
/// unknown offset bits. This does not include alignment padding caused by
/// known offset bits.
///
/// @param LogAlign log2(alignment)
/// @param KnownBits Number of known low offset bits.
static inline unsigned UnknownPadding(unsigned LogAlign, unsigned KnownBits) {
if (KnownBits < LogAlign)
return (1u << LogAlign) - (1u << KnownBits);
return 0;
}
namespace {
/// ARMConstantIslands - Due to limited PC-relative displacements, ARM
/// requires constant pool entries to be scattered among the instructions
/// inside a function. To do this, it completely ignores the normal LLVM
/// constant pool; instead, it places constants wherever it feels like with
/// special instructions.
///
/// The terminology used in this pass includes:
/// Islands - Clumps of constants placed in the function.
/// Water - Potential places where an island could be formed.
/// CPE - A constant pool entry that has been placed somewhere, which
/// tracks a list of users.
class ARMConstantIslands : public MachineFunctionPass {
/// BasicBlockInfo - Information about the offset and size of a single
/// basic block.
struct BasicBlockInfo {
/// Offset - Distance from the beginning of the function to the beginning
/// of this basic block.
///
/// Offsets are computed assuming worst case padding before an aligned
/// block. This means that subtracting basic block offsets always gives a
/// conservative estimate of the real distance which may be smaller.
///
/// Because worst case padding is used, the computed offset of an aligned
/// block may not actually be aligned.
unsigned Offset;
/// Size - Size of the basic block in bytes. If the block contains
/// inline assembly, this is a worst case estimate.
///
/// The size does not include any alignment padding whether from the
/// beginning of the block, or from an aligned jump table at the end.
unsigned Size;
/// KnownBits - The number of low bits in Offset that are known to be
/// exact. The remaining bits of Offset are an upper bound.
uint8_t KnownBits;
/// Unalign - When non-zero, the block contains instructions (inline asm)
/// of unknown size. The real size may be smaller than Size bytes by a
/// multiple of 1 << Unalign.
uint8_t Unalign;
/// PostAlign - When non-zero, the block terminator contains a .align
/// directive, so the end of the block is aligned to 1 << PostAlign
/// bytes.
uint8_t PostAlign;
BasicBlockInfo() : Offset(0), Size(0), KnownBits(0), Unalign(0),
PostAlign(0) {}
/// Compute the number of known offset bits internally to this block.
/// This number should be used to predict worst case padding when
/// splitting the block.
unsigned internalKnownBits() const {
unsigned Bits = Unalign ? Unalign : KnownBits;
// If the block size isn't a multiple of the known bits, assume the
// worst case padding.
if (Size & ((1u << Bits) - 1))
Bits = countTrailingZeros(Size);
return Bits;
}
/// Compute the offset immediately following this block. If LogAlign is
/// specified, return the offset the successor block will get if it has
/// this alignment.
unsigned postOffset(unsigned LogAlign = 0) const {
unsigned PO = Offset + Size;
unsigned LA = std::max(unsigned(PostAlign), LogAlign);
if (!LA)
return PO;
// Add alignment padding from the terminator.
return PO + UnknownPadding(LA, internalKnownBits());
}
/// Compute the number of known low bits of postOffset. If this block
/// contains inline asm, the number of known bits drops to the
/// instruction alignment. An aligned terminator may increase the number
/// of know bits.
/// If LogAlign is given, also consider the alignment of the next block.
unsigned postKnownBits(unsigned LogAlign = 0) const {
return std::max(std::max(unsigned(PostAlign), LogAlign),
internalKnownBits());
}
};
std::vector<BasicBlockInfo> BBInfo;
/// WaterList - A sorted list of basic blocks where islands could be placed
/// (i.e. blocks that don't fall through to the following block, due
/// to a return, unreachable, or unconditional branch).
std::vector<MachineBasicBlock*> WaterList;
/// NewWaterList - The subset of WaterList that was created since the
/// previous iteration by inserting unconditional branches.
SmallSet<MachineBasicBlock*, 4> NewWaterList;
typedef std::vector<MachineBasicBlock*>::iterator water_iterator;
/// CPUser - One user of a constant pool, keeping the machine instruction
/// pointer, the constant pool being referenced, and the max displacement
/// allowed from the instruction to the CP. The HighWaterMark records the
/// highest basic block where a new CPEntry can be placed. To ensure this
/// pass terminates, the CP entries are initially placed at the end of the
/// function and then move monotonically to lower addresses. The
/// exception to this rule is when the current CP entry for a particular
/// CPUser is out of range, but there is another CP entry for the same
/// constant value in range. We want to use the existing in-range CP
/// entry, but if it later moves out of range, the search for new water
/// should resume where it left off. The HighWaterMark is used to record
/// that point.
struct CPUser {
MachineInstr *MI;
MachineInstr *CPEMI;
MachineBasicBlock *HighWaterMark;
unsigned MaxDisp;
bool NegOk;
bool IsSoImm;
bool KnownAlignment;
CPUser(MachineInstr *mi, MachineInstr *cpemi, unsigned maxdisp,
bool neg, bool soimm)
: MI(mi), CPEMI(cpemi), MaxDisp(maxdisp), NegOk(neg), IsSoImm(soimm),
KnownAlignment(false) {
HighWaterMark = CPEMI->getParent();
}
/// getMaxDisp - Returns the maximum displacement supported by MI.
/// Correct for unknown alignment.
/// Conservatively subtract 2 bytes to handle weird alignment effects.
unsigned getMaxDisp() const {
return (KnownAlignment ? MaxDisp : MaxDisp - 2) - 2;
}
};
/// CPUsers - Keep track of all of the machine instructions that use various
/// constant pools and their max displacement.
std::vector<CPUser> CPUsers;
/// CPEntry - One per constant pool entry, keeping the machine instruction
/// pointer, the constpool index, and the number of CPUser's which
/// reference this entry.
struct CPEntry {
MachineInstr *CPEMI;
unsigned CPI;
unsigned RefCount;
CPEntry(MachineInstr *cpemi, unsigned cpi, unsigned rc = 0)
: CPEMI(cpemi), CPI(cpi), RefCount(rc) {}
};
/// CPEntries - Keep track of all of the constant pool entry machine
/// instructions. For each original constpool index (i.e. those that existed
/// upon entry to this pass), it keeps a vector of entries. Original
/// elements are cloned as we go along; the clones are put in the vector of
/// the original element, but have distinct CPIs.
///
/// The first half of CPEntries contains generic constants, the second half
/// contains jump tables. Use getCombinedIndex on a generic CPEMI to look up
/// which vector it will be in here.
std::vector<std::vector<CPEntry> > CPEntries;
/// Maps a JT index to the offset in CPEntries containing copies of that
/// table. The equivalent map for a CONSTPOOL_ENTRY is the identity.
DenseMap<int, int> JumpTableEntryIndices;
/// Maps a JT index to the LEA that actually uses the index to calculate its
/// base address.
DenseMap<int, int> JumpTableUserIndices;
/// ImmBranch - One per immediate branch, keeping the machine instruction
/// pointer, conditional or unconditional, the max displacement,
/// and (if isCond is true) the corresponding unconditional branch
/// opcode.
struct ImmBranch {
MachineInstr *MI;
unsigned MaxDisp : 31;
bool isCond : 1;
unsigned UncondBr;
ImmBranch(MachineInstr *mi, unsigned maxdisp, bool cond, unsigned ubr)
: MI(mi), MaxDisp(maxdisp), isCond(cond), UncondBr(ubr) {}
};
/// ImmBranches - Keep track of all the immediate branch instructions.
///
std::vector<ImmBranch> ImmBranches;
/// PushPopMIs - Keep track of all the Thumb push / pop instructions.
///
SmallVector<MachineInstr*, 4> PushPopMIs;
/// T2JumpTables - Keep track of all the Thumb2 jumptable instructions.
SmallVector<MachineInstr*, 4> T2JumpTables;
/// HasFarJump - True if any far jump instruction has been emitted during
/// the branch fix up pass.
bool HasFarJump;
MachineFunction *MF;
MachineConstantPool *MCP;
const ARMBaseInstrInfo *TII;
const ARMSubtarget *STI;
ARMFunctionInfo *AFI;
bool isThumb;
bool isThumb1;
bool isThumb2;
public:
static char ID;
ARMConstantIslands() : MachineFunctionPass(ID) {}
bool runOnMachineFunction(MachineFunction &MF) override;
MachineFunctionProperties getRequiredProperties() const override {
return MachineFunctionProperties().set(
MachineFunctionProperties::Property::AllVRegsAllocated);
}
const char *getPassName() const override {
return "ARM constant island placement and branch shortening pass";
}
private:
void doInitialConstPlacement(std::vector<MachineInstr *> &CPEMIs);
void doInitialJumpTablePlacement(std::vector<MachineInstr *> &CPEMIs);
bool BBHasFallthrough(MachineBasicBlock *MBB);
CPEntry *findConstPoolEntry(unsigned CPI, const MachineInstr *CPEMI);
unsigned getCPELogAlign(const MachineInstr *CPEMI);
void scanFunctionJumpTables();
void initializeFunctionInfo(const std::vector<MachineInstr*> &CPEMIs);
MachineBasicBlock *splitBlockBeforeInstr(MachineInstr *MI);
void updateForInsertedWaterBlock(MachineBasicBlock *NewBB);
void adjustBBOffsetsAfter(MachineBasicBlock *BB);
bool decrementCPEReferenceCount(unsigned CPI, MachineInstr* CPEMI);
unsigned getCombinedIndex(const MachineInstr *CPEMI);
int findInRangeCPEntry(CPUser& U, unsigned UserOffset);
bool findAvailableWater(CPUser&U, unsigned UserOffset,
water_iterator &WaterIter, bool CloserWater);
void createNewWater(unsigned CPUserIndex, unsigned UserOffset,
MachineBasicBlock *&NewMBB);
bool handleConstantPoolUser(unsigned CPUserIndex, bool CloserWater);
void removeDeadCPEMI(MachineInstr *CPEMI);
bool removeUnusedCPEntries();
bool isCPEntryInRange(MachineInstr *MI, unsigned UserOffset,
MachineInstr *CPEMI, unsigned Disp, bool NegOk,
bool DoDump = false);
bool isWaterInRange(unsigned UserOffset, MachineBasicBlock *Water,
CPUser &U, unsigned &Growth);
bool isBBInRange(MachineInstr *MI, MachineBasicBlock *BB, unsigned Disp);
bool fixupImmediateBr(ImmBranch &Br);
bool fixupConditionalBr(ImmBranch &Br);
bool fixupUnconditionalBr(ImmBranch &Br);
bool undoLRSpillRestore();
bool mayOptimizeThumb2Instruction(const MachineInstr *MI) const;
bool optimizeThumb2Instructions();
bool optimizeThumb2Branches();
bool reorderThumb2JumpTables();
bool preserveBaseRegister(MachineInstr *JumpMI, MachineInstr *LEAMI,
unsigned &DeadSize, bool &CanDeleteLEA,
bool &BaseRegKill);
bool optimizeThumb2JumpTables();
MachineBasicBlock *adjustJTTargetBlockForward(MachineBasicBlock *BB,
MachineBasicBlock *JTBB);
void computeBlockSize(MachineBasicBlock *MBB);
unsigned getOffsetOf(MachineInstr *MI) const;
unsigned getUserOffset(CPUser&) const;
void dumpBBs();
void verify();
bool isOffsetInRange(unsigned UserOffset, unsigned TrialOffset,
unsigned Disp, bool NegativeOK, bool IsSoImm = false);
bool isOffsetInRange(unsigned UserOffset, unsigned TrialOffset,
const CPUser &U) {
return isOffsetInRange(UserOffset, TrialOffset,
U.getMaxDisp(), U.NegOk, U.IsSoImm);
}
};
char ARMConstantIslands::ID = 0;
}
/// verify - check BBOffsets, BBSizes, alignment of islands
void ARMConstantIslands::verify() {
#ifndef NDEBUG
assert(std::is_sorted(MF->begin(), MF->end(),
[this](const MachineBasicBlock &LHS,
const MachineBasicBlock &RHS) {
return BBInfo[LHS.getNumber()].postOffset() <
BBInfo[RHS.getNumber()].postOffset();
}));
DEBUG(dbgs() << "Verifying " << CPUsers.size() << " CP users.\n");
for (unsigned i = 0, e = CPUsers.size(); i != e; ++i) {
CPUser &U = CPUsers[i];
unsigned UserOffset = getUserOffset(U);
// Verify offset using the real max displacement without the safety
// adjustment.
if (isCPEntryInRange(U.MI, UserOffset, U.CPEMI, U.getMaxDisp()+2, U.NegOk,
/* DoDump = */ true)) {
DEBUG(dbgs() << "OK\n");
continue;
}
DEBUG(dbgs() << "Out of range.\n");
dumpBBs();
DEBUG(MF->dump());
llvm_unreachable("Constant pool entry out of range!");
}
#endif
}
/// print block size and offset information - debugging
void ARMConstantIslands::dumpBBs() {
DEBUG({
for (unsigned J = 0, E = BBInfo.size(); J !=E; ++J) {
const BasicBlockInfo &BBI = BBInfo[J];
dbgs() << format("%08x BB#%u\t", BBI.Offset, J)
<< " kb=" << unsigned(BBI.KnownBits)
<< " ua=" << unsigned(BBI.Unalign)
<< " pa=" << unsigned(BBI.PostAlign)
<< format(" size=%#x\n", BBInfo[J].Size);
}
});
}
/// createARMConstantIslandPass - returns an instance of the constpool
/// island pass.
FunctionPass *llvm::createARMConstantIslandPass() {
return new ARMConstantIslands();
}
bool ARMConstantIslands::runOnMachineFunction(MachineFunction &mf) {
MF = &mf;
MCP = mf.getConstantPool();
DEBUG(dbgs() << "***** ARMConstantIslands: "
<< MCP->getConstants().size() << " CP entries, aligned to "
<< MCP->getConstantPoolAlignment() << " bytes *****\n");
STI = &static_cast<const ARMSubtarget &>(MF->getSubtarget());
TII = STI->getInstrInfo();
AFI = MF->getInfo<ARMFunctionInfo>();
isThumb = AFI->isThumbFunction();
isThumb1 = AFI->isThumb1OnlyFunction();
isThumb2 = AFI->isThumb2Function();
HasFarJump = false;
// This pass invalidates liveness information when it splits basic blocks.
MF->getRegInfo().invalidateLiveness();
// Renumber all of the machine basic blocks in the function, guaranteeing that
// the numbers agree with the position of the block in the function.
MF->RenumberBlocks();
// Try to reorder and otherwise adjust the block layout to make good use
// of the TB[BH] instructions.
bool MadeChange = false;
if (isThumb2 && AdjustJumpTableBlocks) {
scanFunctionJumpTables();
MadeChange |= reorderThumb2JumpTables();
// Data is out of date, so clear it. It'll be re-computed later.
T2JumpTables.clear();
// Blocks may have shifted around. Keep the numbering up to date.
MF->RenumberBlocks();
}
// Perform the initial placement of the constant pool entries. To start with,
// we put them all at the end of the function.
std::vector<MachineInstr*> CPEMIs;
if (!MCP->isEmpty())
doInitialConstPlacement(CPEMIs);
if (MF->getJumpTableInfo())
doInitialJumpTablePlacement(CPEMIs);
/// The next UID to take is the first unused one.
AFI->initPICLabelUId(CPEMIs.size());
// Do the initial scan of the function, building up information about the
// sizes of each block, the location of all the water, and finding all of the
// constant pool users.
initializeFunctionInfo(CPEMIs);
CPEMIs.clear();
DEBUG(dumpBBs());
// Functions with jump tables need an alignment of 4 because they use the ADR
// instruction, which aligns the PC to 4 bytes before adding an offset.
if (!T2JumpTables.empty())
MF->ensureAlignment(2);
/// Remove dead constant pool entries.
MadeChange |= removeUnusedCPEntries();
// Iteratively place constant pool entries and fix up branches until there
// is no change.
unsigned NoCPIters = 0, NoBRIters = 0;
while (true) {
DEBUG(dbgs() << "Beginning CP iteration #" << NoCPIters << '\n');
bool CPChange = false;
for (unsigned i = 0, e = CPUsers.size(); i != e; ++i)
// For most inputs, it converges in no more than 5 iterations.
// If it doesn't end in 10, the input may have huge BB or many CPEs.
// In this case, we will try different heuristics.
CPChange |= handleConstantPoolUser(i, NoCPIters >= CPMaxIteration / 2);
if (CPChange && ++NoCPIters > CPMaxIteration)
report_fatal_error("Constant Island pass failed to converge!");
DEBUG(dumpBBs());
// Clear NewWaterList now. If we split a block for branches, it should
// appear as "new water" for the next iteration of constant pool placement.
NewWaterList.clear();
DEBUG(dbgs() << "Beginning BR iteration #" << NoBRIters << '\n');
bool BRChange = false;
for (unsigned i = 0, e = ImmBranches.size(); i != e; ++i)
BRChange |= fixupImmediateBr(ImmBranches[i]);
if (BRChange && ++NoBRIters > 30)
report_fatal_error("Branch Fix Up pass failed to converge!");
DEBUG(dumpBBs());
if (!CPChange && !BRChange)
break;
MadeChange = true;
}
// Shrink 32-bit Thumb2 load and store instructions.
if (isThumb2 && !STI->prefers32BitThumb())
MadeChange |= optimizeThumb2Instructions();
// Shrink 32-bit branch instructions.
if (isThumb && STI->hasV8MBaselineOps())
MadeChange |= optimizeThumb2Branches();
// Optimize jump tables using TBB / TBH.
if (isThumb2)
MadeChange |= optimizeThumb2JumpTables();
// After a while, this might be made debug-only, but it is not expensive.
verify();
// If LR has been forced spilled and no far jump (i.e. BL) has been issued,
// undo the spill / restore of LR if possible.
if (isThumb && !HasFarJump && AFI->isLRSpilledForFarJump())
MadeChange |= undoLRSpillRestore();
// Save the mapping between original and cloned constpool entries.
for (unsigned i = 0, e = CPEntries.size(); i != e; ++i) {
for (unsigned j = 0, je = CPEntries[i].size(); j != je; ++j) {
const CPEntry & CPE = CPEntries[i][j];
if (CPE.CPEMI && CPE.CPEMI->getOperand(1).isCPI())
AFI->recordCPEClone(i, CPE.CPI);
}
}
DEBUG(dbgs() << '\n'; dumpBBs());
BBInfo.clear();
WaterList.clear();
CPUsers.clear();
CPEntries.clear();
JumpTableEntryIndices.clear();
JumpTableUserIndices.clear();
ImmBranches.clear();
PushPopMIs.clear();
T2JumpTables.clear();
return MadeChange;
}
/// \brief Perform the initial placement of the regular constant pool entries.
/// To start with, we put them all at the end of the function.
void
ARMConstantIslands::doInitialConstPlacement(std::vector<MachineInstr*> &CPEMIs) {
// Create the basic block to hold the CPE's.
MachineBasicBlock *BB = MF->CreateMachineBasicBlock();
MF->push_back(BB);
// MachineConstantPool measures alignment in bytes. We measure in log2(bytes).
unsigned MaxAlign = Log2_32(MCP->getConstantPoolAlignment());
// Mark the basic block as required by the const-pool.
BB->setAlignment(MaxAlign);
// The function needs to be as aligned as the basic blocks. The linker may
// move functions around based on their alignment.
MF->ensureAlignment(BB->getAlignment());
// Order the entries in BB by descending alignment. That ensures correct
// alignment of all entries as long as BB is sufficiently aligned. Keep
// track of the insertion point for each alignment. We are going to bucket
// sort the entries as they are created.
SmallVector<MachineBasicBlock::iterator, 8> InsPoint(MaxAlign + 1, BB->end());
// Add all of the constants from the constant pool to the end block, use an
// identity mapping of CPI's to CPE's.
const std::vector<MachineConstantPoolEntry> &CPs = MCP->getConstants();
const DataLayout &TD = MF->getDataLayout();
for (unsigned i = 0, e = CPs.size(); i != e; ++i) {
unsigned Size = TD.getTypeAllocSize(CPs[i].getType());
assert(Size >= 4 && "Too small constant pool entry");
unsigned Align = CPs[i].getAlignment();
assert(isPowerOf2_32(Align) && "Invalid alignment");
// Verify that all constant pool entries are a multiple of their alignment.
// If not, we would have to pad them out so that instructions stay aligned.
assert((Size % Align) == 0 && "CP Entry not multiple of 4 bytes!");
// Insert CONSTPOOL_ENTRY before entries with a smaller alignment.
unsigned LogAlign = Log2_32(Align);
MachineBasicBlock::iterator InsAt = InsPoint[LogAlign];
MachineInstr *CPEMI =
BuildMI(*BB, InsAt, DebugLoc(), TII->get(ARM::CONSTPOOL_ENTRY))
.addImm(i).addConstantPoolIndex(i).addImm(Size);
CPEMIs.push_back(CPEMI);
// Ensure that future entries with higher alignment get inserted before
// CPEMI. This is bucket sort with iterators.
for (unsigned a = LogAlign + 1; a <= MaxAlign; ++a)
if (InsPoint[a] == InsAt)
InsPoint[a] = CPEMI;
// Add a new CPEntry, but no corresponding CPUser yet.
CPEntries.emplace_back(1, CPEntry(CPEMI, i));
++NumCPEs;
DEBUG(dbgs() << "Moved CPI#" << i << " to end of function, size = "
<< Size << ", align = " << Align <<'\n');
}
DEBUG(BB->dump());
}
/// \brief Do initial placement of the jump tables. Because Thumb2's TBB and TBH
/// instructions can be made more efficient if the jump table immediately
/// follows the instruction, it's best to place them immediately next to their
/// jumps to begin with. In almost all cases they'll never be moved from that
/// position.
void ARMConstantIslands::doInitialJumpTablePlacement(
std::vector<MachineInstr *> &CPEMIs) {
unsigned i = CPEntries.size();
auto MJTI = MF->getJumpTableInfo();
const std::vector<MachineJumpTableEntry> &JT = MJTI->getJumpTables();
MachineBasicBlock *LastCorrectlyNumberedBB = nullptr;
for (MachineBasicBlock &MBB : *MF) {
auto MI = MBB.getLastNonDebugInstr();
if (MI == MBB.end())
continue;
unsigned JTOpcode;
switch (MI->getOpcode()) {
default:
continue;
case ARM::BR_JTadd:
case ARM::BR_JTr:
case ARM::tBR_JTr:
case ARM::BR_JTm:
JTOpcode = ARM::JUMPTABLE_ADDRS;
break;
case ARM::t2BR_JT:
JTOpcode = ARM::JUMPTABLE_INSTS;
break;
case ARM::t2TBB_JT:
JTOpcode = ARM::JUMPTABLE_TBB;
break;
case ARM::t2TBH_JT:
JTOpcode = ARM::JUMPTABLE_TBH;
break;
}
unsigned NumOps = MI->getDesc().getNumOperands();
MachineOperand JTOp =
MI->getOperand(NumOps - (MI->isPredicable() ? 2 : 1));
unsigned JTI = JTOp.getIndex();
unsigned Size = JT[JTI].MBBs.size() * sizeof(uint32_t);
MachineBasicBlock *JumpTableBB = MF->CreateMachineBasicBlock();
MF->insert(std::next(MachineFunction::iterator(MBB)), JumpTableBB);
MachineInstr *CPEMI = BuildMI(*JumpTableBB, JumpTableBB->begin(),
DebugLoc(), TII->get(JTOpcode))
.addImm(i++)
.addJumpTableIndex(JTI)
.addImm(Size);
CPEMIs.push_back(CPEMI);
CPEntries.emplace_back(1, CPEntry(CPEMI, JTI));
JumpTableEntryIndices.insert(std::make_pair(JTI, CPEntries.size() - 1));
if (!LastCorrectlyNumberedBB)
LastCorrectlyNumberedBB = &MBB;
}
// If we did anything then we need to renumber the subsequent blocks.
if (LastCorrectlyNumberedBB)
MF->RenumberBlocks(LastCorrectlyNumberedBB);
}
/// BBHasFallthrough - Return true if the specified basic block can fallthrough
/// into the block immediately after it.
bool ARMConstantIslands::BBHasFallthrough(MachineBasicBlock *MBB) {
// Get the next machine basic block in the function.
MachineFunction::iterator MBBI = MBB->getIterator();
// Can't fall off end of function.
if (std::next(MBBI) == MBB->getParent()->end())
return false;
MachineBasicBlock *NextBB = &*std::next(MBBI);
if (std::find(MBB->succ_begin(), MBB->succ_end(), NextBB) == MBB->succ_end())
return false;
// Try to analyze the end of the block. A potential fallthrough may already
// have an unconditional branch for whatever reason.
MachineBasicBlock *TBB, *FBB;
SmallVector<MachineOperand, 4> Cond;
bool TooDifficult = TII->analyzeBranch(*MBB, TBB, FBB, Cond);
return TooDifficult || FBB == nullptr;
}
/// findConstPoolEntry - Given the constpool index and CONSTPOOL_ENTRY MI,
/// look up the corresponding CPEntry.
ARMConstantIslands::CPEntry
*ARMConstantIslands::findConstPoolEntry(unsigned CPI,
const MachineInstr *CPEMI) {
std::vector<CPEntry> &CPEs = CPEntries[CPI];
// Number of entries per constpool index should be small, just do a
// linear search.
for (unsigned i = 0, e = CPEs.size(); i != e; ++i) {
if (CPEs[i].CPEMI == CPEMI)
return &CPEs[i];
}
return nullptr;
}
/// getCPELogAlign - Returns the required alignment of the constant pool entry
/// represented by CPEMI. Alignment is measured in log2(bytes) units.
unsigned ARMConstantIslands::getCPELogAlign(const MachineInstr *CPEMI) {
switch (CPEMI->getOpcode()) {
case ARM::CONSTPOOL_ENTRY:
break;
case ARM::JUMPTABLE_TBB:
return 0;
case ARM::JUMPTABLE_TBH:
case ARM::JUMPTABLE_INSTS:
return 1;
case ARM::JUMPTABLE_ADDRS:
return 2;
default:
llvm_unreachable("unknown constpool entry kind");
}
unsigned CPI = getCombinedIndex(CPEMI);
assert(CPI < MCP->getConstants().size() && "Invalid constant pool index.");
unsigned Align = MCP->getConstants()[CPI].getAlignment();
assert(isPowerOf2_32(Align) && "Invalid CPE alignment");
return Log2_32(Align);
}
/// scanFunctionJumpTables - Do a scan of the function, building up
/// information about the sizes of each block and the locations of all
/// the jump tables.
void ARMConstantIslands::scanFunctionJumpTables() {
for (MachineBasicBlock &MBB : *MF) {
for (MachineInstr &I : MBB)
if (I.isBranch() && I.getOpcode() == ARM::t2BR_JT)
T2JumpTables.push_back(&I);
}
}
/// initializeFunctionInfo - Do the initial scan of the function, building up
/// information about the sizes of each block, the location of all the water,
/// and finding all of the constant pool users.
void ARMConstantIslands::
initializeFunctionInfo(const std::vector<MachineInstr*> &CPEMIs) {
BBInfo.clear();
BBInfo.resize(MF->getNumBlockIDs());
// First thing, compute the size of all basic blocks, and see if the function
// has any inline assembly in it. If so, we have to be conservative about
// alignment assumptions, as we don't know for sure the size of any
// instructions in the inline assembly.
for (MachineBasicBlock &MBB : *MF)
computeBlockSize(&MBB);
// The known bits of the entry block offset are determined by the function
// alignment.
BBInfo.front().KnownBits = MF->getAlignment();
// Compute block offsets and known bits.
adjustBBOffsetsAfter(&MF->front());
// Now go back through the instructions and build up our data structures.
for (MachineBasicBlock &MBB : *MF) {
// If this block doesn't fall through into the next MBB, then this is
// 'water' that a constant pool island could be placed.
if (!BBHasFallthrough(&MBB))
WaterList.push_back(&MBB);
for (MachineInstr &I : MBB) {
if (I.isDebugValue())
continue;
unsigned Opc = I.getOpcode();
if (I.isBranch()) {
bool isCond = false;
unsigned Bits = 0;
unsigned Scale = 1;
int UOpc = Opc;
switch (Opc) {
default:
continue; // Ignore other JT branches
case ARM::t2BR_JT:
T2JumpTables.push_back(&I);
continue; // Does not get an entry in ImmBranches
case ARM::Bcc:
isCond = true;
UOpc = ARM::B;
// Fallthrough
case ARM::B:
Bits = 24;
Scale = 4;
break;
case ARM::tBcc:
isCond = true;
UOpc = ARM::tB;
Bits = 8;
Scale = 2;
break;
case ARM::tB:
Bits = 11;
Scale = 2;
break;
case ARM::t2Bcc:
isCond = true;
UOpc = ARM::t2B;
Bits = 20;
Scale = 2;
break;
case ARM::t2B:
Bits = 24;
Scale = 2;
break;
}
// Record this immediate branch.
unsigned MaxOffs = ((1 << (Bits-1))-1) * Scale;
ImmBranches.push_back(ImmBranch(&I, MaxOffs, isCond, UOpc));
}
if (Opc == ARM::tPUSH || Opc == ARM::tPOP_RET)
PushPopMIs.push_back(&I);
if (Opc == ARM::CONSTPOOL_ENTRY || Opc == ARM::JUMPTABLE_ADDRS ||
Opc == ARM::JUMPTABLE_INSTS || Opc == ARM::JUMPTABLE_TBB ||
Opc == ARM::JUMPTABLE_TBH)
continue;
// Scan the instructions for constant pool operands.
for (unsigned op = 0, e = I.getNumOperands(); op != e; ++op)
if (I.getOperand(op).isCPI() || I.getOperand(op).isJTI()) {
// We found one. The addressing mode tells us the max displacement
// from the PC that this instruction permits.
// Basic size info comes from the TSFlags field.
unsigned Bits = 0;
unsigned Scale = 1;
bool NegOk = false;
bool IsSoImm = false;
switch (Opc) {
default:
llvm_unreachable("Unknown addressing mode for CP reference!");
// Taking the address of a CP entry.
case ARM::LEApcrel:
case ARM::LEApcrelJT:
// This takes a SoImm, which is 8 bit immediate rotated. We'll
// pretend the maximum offset is 255 * 4. Since each instruction
// 4 byte wide, this is always correct. We'll check for other
// displacements that fits in a SoImm as well.
Bits = 8;
Scale = 4;
NegOk = true;
IsSoImm = true;
break;
case ARM::t2LEApcrel:
case ARM::t2LEApcrelJT:
Bits = 12;
NegOk = true;
break;
case ARM::tLEApcrel:
case ARM::tLEApcrelJT:
Bits = 8;
Scale = 4;
break;
case ARM::LDRBi12:
case ARM::LDRi12:
case ARM::LDRcp:
case ARM::t2LDRpci:
Bits = 12; // +-offset_12
NegOk = true;
break;
case ARM::tLDRpci:
Bits = 8;
Scale = 4; // +(offset_8*4)
break;
case ARM::VLDRD:
case ARM::VLDRS:
Bits = 8;
Scale = 4; // +-(offset_8*4)
NegOk = true;
break;
}
// Remember that this is a user of a CP entry.
unsigned CPI = I.getOperand(op).getIndex();
if (I.getOperand(op).isJTI()) {
JumpTableUserIndices.insert(std::make_pair(CPI, CPUsers.size()));
CPI = JumpTableEntryIndices[CPI];
}
MachineInstr *CPEMI = CPEMIs[CPI];
unsigned MaxOffs = ((1 << Bits)-1) * Scale;
CPUsers.push_back(CPUser(&I, CPEMI, MaxOffs, NegOk, IsSoImm));
// Increment corresponding CPEntry reference count.
CPEntry *CPE = findConstPoolEntry(CPI, CPEMI);
assert(CPE && "Cannot find a corresponding CPEntry!");
CPE->RefCount++;
// Instructions can only use one CP entry, don't bother scanning the
// rest of the operands.
break;
}
}
}
}
/// computeBlockSize - Compute the size and some alignment information for MBB.
/// This function updates BBInfo directly.
void ARMConstantIslands::computeBlockSize(MachineBasicBlock *MBB) {
BasicBlockInfo &BBI = BBInfo[MBB->getNumber()];
BBI.Size = 0;
BBI.Unalign = 0;
BBI.PostAlign = 0;
for (MachineInstr &I : *MBB) {
BBI.Size += TII->GetInstSizeInBytes(I);
// For inline asm, GetInstSizeInBytes returns a conservative estimate.
// The actual size may be smaller, but still a multiple of the instr size.
if (I.isInlineAsm())
BBI.Unalign = isThumb ? 1 : 2;
// Also consider instructions that may be shrunk later.
else if (isThumb && mayOptimizeThumb2Instruction(&I))
BBI.Unalign = 1;
}
// tBR_JTr contains a .align 2 directive.
if (!MBB->empty() && MBB->back().getOpcode() == ARM::tBR_JTr) {
BBI.PostAlign = 2;
MBB->getParent()->ensureAlignment(2);
}
}
/// getOffsetOf - Return the current offset of the specified machine instruction
/// from the start of the function. This offset changes as stuff is moved
/// around inside the function.
unsigned ARMConstantIslands::getOffsetOf(MachineInstr *MI) const {
MachineBasicBlock *MBB = MI->getParent();
// The offset is composed of two things: the sum of the sizes of all MBB's
// before this instruction's block, and the offset from the start of the block
// it is in.
unsigned Offset = BBInfo[MBB->getNumber()].Offset;
// Sum instructions before MI in MBB.
for (MachineBasicBlock::iterator I = MBB->begin(); &*I != MI; ++I) {
assert(I != MBB->end() && "Didn't find MI in its own basic block?");
Offset += TII->GetInstSizeInBytes(*I);
}
return Offset;
}
/// CompareMBBNumbers - Little predicate function to sort the WaterList by MBB
/// ID.
static bool CompareMBBNumbers(const MachineBasicBlock *LHS,
const MachineBasicBlock *RHS) {
return LHS->getNumber() < RHS->getNumber();
}
/// updateForInsertedWaterBlock - When a block is newly inserted into the
/// machine function, it upsets all of the block numbers. Renumber the blocks
/// and update the arrays that parallel this numbering.
void ARMConstantIslands::updateForInsertedWaterBlock(MachineBasicBlock *NewBB) {
// Renumber the MBB's to keep them consecutive.
NewBB->getParent()->RenumberBlocks(NewBB);
// Insert an entry into BBInfo to align it properly with the (newly
// renumbered) block numbers.
BBInfo.insert(BBInfo.begin() + NewBB->getNumber(), BasicBlockInfo());
// Next, update WaterList. Specifically, we need to add NewMBB as having
// available water after it.
water_iterator IP =
std::lower_bound(WaterList.begin(), WaterList.end(), NewBB,
CompareMBBNumbers);
WaterList.insert(IP, NewBB);
}
/// Split the basic block containing MI into two blocks, which are joined by
/// an unconditional branch. Update data structures and renumber blocks to
/// account for this change and returns the newly created block.
MachineBasicBlock *ARMConstantIslands::splitBlockBeforeInstr(MachineInstr *MI) {
MachineBasicBlock *OrigBB = MI->getParent();
// Create a new MBB for the code after the OrigBB.
MachineBasicBlock *NewBB =
MF->CreateMachineBasicBlock(OrigBB->getBasicBlock());
MachineFunction::iterator MBBI = ++OrigBB->getIterator();
MF->insert(MBBI, NewBB);
// Splice the instructions starting with MI over to NewBB.
NewBB->splice(NewBB->end(), OrigBB, MI, OrigBB->end());
// Add an unconditional branch from OrigBB to NewBB.
// Note the new unconditional branch is not being recorded.
// There doesn't seem to be meaningful DebugInfo available; this doesn't
// correspond to anything in the source.
unsigned Opc = isThumb ? (isThumb2 ? ARM::t2B : ARM::tB) : ARM::B;
if (!isThumb)
BuildMI(OrigBB, DebugLoc(), TII->get(Opc)).addMBB(NewBB);
else
BuildMI(OrigBB, DebugLoc(), TII->get(Opc)).addMBB(NewBB)
.addImm(ARMCC::AL).addReg(0);
++NumSplit;
// Update the CFG. All succs of OrigBB are now succs of NewBB.
NewBB->transferSuccessors(OrigBB);
// OrigBB branches to NewBB.
OrigBB->addSuccessor(NewBB);
// Update internal data structures to account for the newly inserted MBB.
// This is almost the same as updateForInsertedWaterBlock, except that
// the Water goes after OrigBB, not NewBB.
MF->RenumberBlocks(NewBB);
// Insert an entry into BBInfo to align it properly with the (newly
// renumbered) block numbers.
BBInfo.insert(BBInfo.begin() + NewBB->getNumber(), BasicBlockInfo());
// Next, update WaterList. Specifically, we need to add OrigMBB as having
// available water after it (but not if it's already there, which happens
// when splitting before a conditional branch that is followed by an
// unconditional branch - in that case we want to insert NewBB).
water_iterator IP =
std::lower_bound(WaterList.begin(), WaterList.end(), OrigBB,
CompareMBBNumbers);
MachineBasicBlock* WaterBB = *IP;
if (WaterBB == OrigBB)
WaterList.insert(std::next(IP), NewBB);
else
WaterList.insert(IP, OrigBB);
NewWaterList.insert(OrigBB);
// Figure out how large the OrigBB is. As the first half of the original
// block, it cannot contain a tablejump. The size includes
// the new jump we added. (It should be possible to do this without
// recounting everything, but it's very confusing, and this is rarely
// executed.)
computeBlockSize(OrigBB);
// Figure out how large the NewMBB is. As the second half of the original
// block, it may contain a tablejump.
computeBlockSize(NewBB);
// All BBOffsets following these blocks must be modified.
adjustBBOffsetsAfter(OrigBB);
return NewBB;
}
/// getUserOffset - Compute the offset of U.MI as seen by the hardware
/// displacement computation. Update U.KnownAlignment to match its current
/// basic block location.
unsigned ARMConstantIslands::getUserOffset(CPUser &U) const {
unsigned UserOffset = getOffsetOf(U.MI);
const BasicBlockInfo &BBI = BBInfo[U.MI->getParent()->getNumber()];
unsigned KnownBits = BBI.internalKnownBits();
// The value read from PC is offset from the actual instruction address.
UserOffset += (isThumb ? 4 : 8);
// Because of inline assembly, we may not know the alignment (mod 4) of U.MI.
// Make sure U.getMaxDisp() returns a constrained range.
U.KnownAlignment = (KnownBits >= 2);
// On Thumb, offsets==2 mod 4 are rounded down by the hardware for
// purposes of the displacement computation; compensate for that here.
// For unknown alignments, getMaxDisp() constrains the range instead.
if (isThumb && U.KnownAlignment)
UserOffset &= ~3u;
return UserOffset;
}
/// isOffsetInRange - Checks whether UserOffset (the location of a constant pool
/// reference) is within MaxDisp of TrialOffset (a proposed location of a
/// constant pool entry).
/// UserOffset is computed by getUserOffset above to include PC adjustments. If
/// the mod 4 alignment of UserOffset is not known, the uncertainty must be
/// subtracted from MaxDisp instead. CPUser::getMaxDisp() does that.
bool ARMConstantIslands::isOffsetInRange(unsigned UserOffset,
unsigned TrialOffset, unsigned MaxDisp,
bool NegativeOK, bool IsSoImm) {
if (UserOffset <= TrialOffset) {
// User before the Trial.
if (TrialOffset - UserOffset <= MaxDisp)
return true;
// FIXME: Make use full range of soimm values.
} else if (NegativeOK) {
if (UserOffset - TrialOffset <= MaxDisp)
return true;
// FIXME: Make use full range of soimm values.
}
return false;
}
/// isWaterInRange - Returns true if a CPE placed after the specified
/// Water (a basic block) will be in range for the specific MI.
///
/// Compute how much the function will grow by inserting a CPE after Water.
bool ARMConstantIslands::isWaterInRange(unsigned UserOffset,
MachineBasicBlock* Water, CPUser &U,
unsigned &Growth) {
unsigned CPELogAlign = getCPELogAlign(U.CPEMI);
unsigned CPEOffset = BBInfo[Water->getNumber()].postOffset(CPELogAlign);
unsigned NextBlockOffset, NextBlockAlignment;
MachineFunction::const_iterator NextBlock = Water->getIterator();
if (++NextBlock == MF->end()) {
NextBlockOffset = BBInfo[Water->getNumber()].postOffset();
NextBlockAlignment = 0;
} else {
NextBlockOffset = BBInfo[NextBlock->getNumber()].Offset;
NextBlockAlignment = NextBlock->getAlignment();
}
unsigned Size = U.CPEMI->getOperand(2).getImm();
unsigned CPEEnd = CPEOffset + Size;
// The CPE may be able to hide in the alignment padding before the next
// block. It may also cause more padding to be required if it is more aligned
// that the next block.
if (CPEEnd > NextBlockOffset) {
Growth = CPEEnd - NextBlockOffset;
// Compute the padding that would go at the end of the CPE to align the next
// block.
Growth += OffsetToAlignment(CPEEnd, 1ULL << NextBlockAlignment);
// If the CPE is to be inserted before the instruction, that will raise
// the offset of the instruction. Also account for unknown alignment padding
// in blocks between CPE and the user.
if (CPEOffset < UserOffset)
UserOffset += Growth + UnknownPadding(MF->getAlignment(), CPELogAlign);
} else
// CPE fits in existing padding.
Growth = 0;
return isOffsetInRange(UserOffset, CPEOffset, U);
}
/// isCPEntryInRange - Returns true if the distance between specific MI and
/// specific ConstPool entry instruction can fit in MI's displacement field.
bool ARMConstantIslands::isCPEntryInRange(MachineInstr *MI, unsigned UserOffset,
MachineInstr *CPEMI, unsigned MaxDisp,
bool NegOk, bool DoDump) {
unsigned CPEOffset = getOffsetOf(CPEMI);
if (DoDump) {
DEBUG({
unsigned Block = MI->getParent()->getNumber();
const BasicBlockInfo &BBI = BBInfo[Block];
dbgs() << "User of CPE#" << CPEMI->getOperand(0).getImm()
<< " max delta=" << MaxDisp
<< format(" insn address=%#x", UserOffset)
<< " in BB#" << Block << ": "
<< format("%#x-%x\t", BBI.Offset, BBI.postOffset()) << *MI
<< format("CPE address=%#x offset=%+d: ", CPEOffset,
int(CPEOffset-UserOffset));
});
}
return isOffsetInRange(UserOffset, CPEOffset, MaxDisp, NegOk);
}
#ifndef NDEBUG
/// BBIsJumpedOver - Return true of the specified basic block's only predecessor
/// unconditionally branches to its only successor.
static bool BBIsJumpedOver(MachineBasicBlock *MBB) {
if (MBB->pred_size() != 1 || MBB->succ_size() != 1)
return false;
MachineBasicBlock *Succ = *MBB->succ_begin();
MachineBasicBlock *Pred = *MBB->pred_begin();
MachineInstr *PredMI = &Pred->back();
if (PredMI->getOpcode() == ARM::B || PredMI->getOpcode() == ARM::tB
|| PredMI->getOpcode() == ARM::t2B)
return PredMI->getOperand(0).getMBB() == Succ;
return false;
}
#endif // NDEBUG
void ARMConstantIslands::adjustBBOffsetsAfter(MachineBasicBlock *BB) {
unsigned BBNum = BB->getNumber();
for(unsigned i = BBNum + 1, e = MF->getNumBlockIDs(); i < e; ++i) {
// Get the offset and known bits at the end of the layout predecessor.
// Include the alignment of the current block.
unsigned LogAlign = MF->getBlockNumbered(i)->getAlignment();
unsigned Offset = BBInfo[i - 1].postOffset(LogAlign);
unsigned KnownBits = BBInfo[i - 1].postKnownBits(LogAlign);
// This is where block i begins. Stop if the offset is already correct,
// and we have updated 2 blocks. This is the maximum number of blocks
// changed before calling this function.
if (i > BBNum + 2 &&
BBInfo[i].Offset == Offset &&
BBInfo[i].KnownBits == KnownBits)
break;
BBInfo[i].Offset = Offset;
BBInfo[i].KnownBits = KnownBits;
}
}
/// decrementCPEReferenceCount - find the constant pool entry with index CPI
/// and instruction CPEMI, and decrement its refcount. If the refcount
/// becomes 0 remove the entry and instruction. Returns true if we removed
/// the entry, false if we didn't.
bool ARMConstantIslands::decrementCPEReferenceCount(unsigned CPI,
MachineInstr *CPEMI) {
// Find the old entry. Eliminate it if it is no longer used.
CPEntry *CPE = findConstPoolEntry(CPI, CPEMI);
assert(CPE && "Unexpected!");
if (--CPE->RefCount == 0) {
removeDeadCPEMI(CPEMI);
CPE->CPEMI = nullptr;
--NumCPEs;
return true;
}
return false;
}
unsigned ARMConstantIslands::getCombinedIndex(const MachineInstr *CPEMI) {
if (CPEMI->getOperand(1).isCPI())
return CPEMI->getOperand(1).getIndex();
return JumpTableEntryIndices[CPEMI->getOperand(1).getIndex()];
}
/// LookForCPEntryInRange - see if the currently referenced CPE is in range;
/// if not, see if an in-range clone of the CPE is in range, and if so,
/// change the data structures so the user references the clone. Returns:
/// 0 = no existing entry found
/// 1 = entry found, and there were no code insertions or deletions
/// 2 = entry found, and there were code insertions or deletions
int ARMConstantIslands::findInRangeCPEntry(CPUser& U, unsigned UserOffset)
{
MachineInstr *UserMI = U.MI;
MachineInstr *CPEMI = U.CPEMI;
// Check to see if the CPE is already in-range.
if (isCPEntryInRange(UserMI, UserOffset, CPEMI, U.getMaxDisp(), U.NegOk,
true)) {
DEBUG(dbgs() << "In range\n");
return 1;
}
// No. Look for previously created clones of the CPE that are in range.
unsigned CPI = getCombinedIndex(CPEMI);
std::vector<CPEntry> &CPEs = CPEntries[CPI];
for (unsigned i = 0, e = CPEs.size(); i != e; ++i) {
// We already tried this one
if (CPEs[i].CPEMI == CPEMI)
continue;
// Removing CPEs can leave empty entries, skip
if (CPEs[i].CPEMI == nullptr)
continue;
if (isCPEntryInRange(UserMI, UserOffset, CPEs[i].CPEMI, U.getMaxDisp(),
U.NegOk)) {
DEBUG(dbgs() << "Replacing CPE#" << CPI << " with CPE#"
<< CPEs[i].CPI << "\n");
// Point the CPUser node to the replacement
U.CPEMI = CPEs[i].CPEMI;
// Change the CPI in the instruction operand to refer to the clone.
for (unsigned j = 0, e = UserMI->getNumOperands(); j != e; ++j)
if (UserMI->getOperand(j).isCPI()) {
UserMI->getOperand(j).setIndex(CPEs[i].CPI);
break;
}
// Adjust the refcount of the clone...
CPEs[i].RefCount++;
// ...and the original. If we didn't remove the old entry, none of the
// addresses changed, so we don't need another pass.
return decrementCPEReferenceCount(CPI, CPEMI) ? 2 : 1;
}
}
return 0;
}
/// getUnconditionalBrDisp - Returns the maximum displacement that can fit in
/// the specific unconditional branch instruction.
static inline unsigned getUnconditionalBrDisp(int Opc) {
switch (Opc) {
case ARM::tB:
return ((1<<10)-1)*2;
case ARM::t2B:
return ((1<<23)-1)*2;
default:
break;
}
return ((1<<23)-1)*4;
}
/// findAvailableWater - Look for an existing entry in the WaterList in which
/// we can place the CPE referenced from U so it's within range of U's MI.
/// Returns true if found, false if not. If it returns true, WaterIter
/// is set to the WaterList entry. For Thumb, prefer water that will not
/// introduce padding to water that will. To ensure that this pass
/// terminates, the CPE location for a particular CPUser is only allowed to
/// move to a lower address, so search backward from the end of the list and
/// prefer the first water that is in range.
bool ARMConstantIslands::findAvailableWater(CPUser &U, unsigned UserOffset,
water_iterator &WaterIter,
bool CloserWater) {
if (WaterList.empty())
return false;
unsigned BestGrowth = ~0u;
// The nearest water without splitting the UserBB is right after it.
// If the distance is still large (we have a big BB), then we need to split it
// if we don't converge after certain iterations. This helps the following
// situation to converge:
// BB0:
// Big BB
// BB1:
// Constant Pool
// When a CP access is out of range, BB0 may be used as water. However,
// inserting islands between BB0 and BB1 makes other accesses out of range.
MachineBasicBlock *UserBB = U.MI->getParent();
unsigned MinNoSplitDisp =
BBInfo[UserBB->getNumber()].postOffset(getCPELogAlign(U.CPEMI));
if (CloserWater && MinNoSplitDisp > U.getMaxDisp() / 2)
return false;
for (water_iterator IP = std::prev(WaterList.end()), B = WaterList.begin();;
--IP) {
MachineBasicBlock* WaterBB = *IP;
// Check if water is in range and is either at a lower address than the
// current "high water mark" or a new water block that was created since
// the previous iteration by inserting an unconditional branch. In the
// latter case, we want to allow resetting the high water mark back to
// this new water since we haven't seen it before. Inserting branches
// should be relatively uncommon and when it does happen, we want to be
// sure to take advantage of it for all the CPEs near that block, so that
// we don't insert more branches than necessary.
// When CloserWater is true, we try to find the lowest address after (or
// equal to) user MI's BB no matter of padding growth.
unsigned Growth;
if (isWaterInRange(UserOffset, WaterBB, U, Growth) &&
(WaterBB->getNumber() < U.HighWaterMark->getNumber() ||
NewWaterList.count(WaterBB) || WaterBB == U.MI->getParent()) &&
Growth < BestGrowth) {
// This is the least amount of required padding seen so far.
BestGrowth = Growth;
WaterIter = IP;
DEBUG(dbgs() << "Found water after BB#" << WaterBB->getNumber()
<< " Growth=" << Growth << '\n');
if (CloserWater && WaterBB == U.MI->getParent())
return true;
// Keep looking unless it is perfect and we're not looking for the lowest
// possible address.
if (!CloserWater && BestGrowth == 0)
return true;
}
if (IP == B)
break;
}
return BestGrowth != ~0u;
}
/// createNewWater - No existing WaterList entry will work for
/// CPUsers[CPUserIndex], so create a place to put the CPE. The end of the
/// block is used if in range, and the conditional branch munged so control
/// flow is correct. Otherwise the block is split to create a hole with an
/// unconditional branch around it. In either case NewMBB is set to a
/// block following which the new island can be inserted (the WaterList
/// is not adjusted).
void ARMConstantIslands::createNewWater(unsigned CPUserIndex,
unsigned UserOffset,
MachineBasicBlock *&NewMBB) {
CPUser &U = CPUsers[CPUserIndex];
MachineInstr *UserMI = U.MI;
MachineInstr *CPEMI = U.CPEMI;
unsigned CPELogAlign = getCPELogAlign(CPEMI);
MachineBasicBlock *UserMBB = UserMI->getParent();
const BasicBlockInfo &UserBBI = BBInfo[UserMBB->getNumber()];
// If the block does not end in an unconditional branch already, and if the
// end of the block is within range, make new water there. (The addition
// below is for the unconditional branch we will be adding: 4 bytes on ARM +
// Thumb2, 2 on Thumb1.
if (BBHasFallthrough(UserMBB)) {
// Size of branch to insert.
unsigned Delta = isThumb1 ? 2 : 4;
// Compute the offset where the CPE will begin.
unsigned CPEOffset = UserBBI.postOffset(CPELogAlign) + Delta;
if (isOffsetInRange(UserOffset, CPEOffset, U)) {
DEBUG(dbgs() << "Split at end of BB#" << UserMBB->getNumber()
<< format(", expected CPE offset %#x\n", CPEOffset));
NewMBB = &*++UserMBB->getIterator();
// Add an unconditional branch from UserMBB to fallthrough block. Record
// it for branch lengthening; this new branch will not get out of range,
// but if the preceding conditional branch is out of range, the targets
// will be exchanged, and the altered branch may be out of range, so the
// machinery has to know about it.
int UncondBr = isThumb ? ((isThumb2) ? ARM::t2B : ARM::tB) : ARM::B;
if (!isThumb)
BuildMI(UserMBB, DebugLoc(), TII->get(UncondBr)).addMBB(NewMBB);
else
BuildMI(UserMBB, DebugLoc(), TII->get(UncondBr)).addMBB(NewMBB)
.addImm(ARMCC::AL).addReg(0);
unsigned MaxDisp = getUnconditionalBrDisp(UncondBr);
ImmBranches.push_back(ImmBranch(&UserMBB->back(),
MaxDisp, false, UncondBr));
computeBlockSize(UserMBB);
adjustBBOffsetsAfter(UserMBB);
return;
}
}
// What a big block. Find a place within the block to split it. This is a
// little tricky on Thumb1 since instructions are 2 bytes and constant pool
// entries are 4 bytes: if instruction I references island CPE, and
// instruction I+1 references CPE', it will not work well to put CPE as far
// forward as possible, since then CPE' cannot immediately follow it (that
// location is 2 bytes farther away from I+1 than CPE was from I) and we'd
// need to create a new island. So, we make a first guess, then walk through
// the instructions between the one currently being looked at and the
// possible insertion point, and make sure any other instructions that
// reference CPEs will be able to use the same island area; if not, we back
// up the insertion point.
// Try to split the block so it's fully aligned. Compute the latest split
// point where we can add a 4-byte branch instruction, and then align to
// LogAlign which is the largest possible alignment in the function.
unsigned LogAlign = MF->getAlignment();
assert(LogAlign >= CPELogAlign && "Over-aligned constant pool entry");
unsigned KnownBits = UserBBI.internalKnownBits();
unsigned UPad = UnknownPadding(LogAlign, KnownBits);
unsigned BaseInsertOffset = UserOffset + U.getMaxDisp() - UPad;
DEBUG(dbgs() << format("Split in middle of big block before %#x",
BaseInsertOffset));
// The 4 in the following is for the unconditional branch we'll be inserting
// (allows for long branch on Thumb1). Alignment of the island is handled
// inside isOffsetInRange.
BaseInsertOffset -= 4;
DEBUG(dbgs() << format(", adjusted to %#x", BaseInsertOffset)
<< " la=" << LogAlign
<< " kb=" << KnownBits
<< " up=" << UPad << '\n');
// This could point off the end of the block if we've already got constant
// pool entries following this block; only the last one is in the water list.
// Back past any possible branches (allow for a conditional and a maximally
// long unconditional).
if (BaseInsertOffset + 8 >= UserBBI.postOffset()) {
// Ensure BaseInsertOffset is larger than the offset of the instruction
// following UserMI so that the loop which searches for the split point
// iterates at least once.
BaseInsertOffset =
std::max(UserBBI.postOffset() - UPad - 8,
UserOffset + TII->GetInstSizeInBytes(*UserMI) + 1);
DEBUG(dbgs() << format("Move inside block: %#x\n", BaseInsertOffset));
}
unsigned EndInsertOffset = BaseInsertOffset + 4 + UPad +
CPEMI->getOperand(2).getImm();
MachineBasicBlock::iterator MI = UserMI;
++MI;
unsigned CPUIndex = CPUserIndex+1;
unsigned NumCPUsers = CPUsers.size();
MachineInstr *LastIT = nullptr;
for (unsigned Offset = UserOffset + TII->GetInstSizeInBytes(*UserMI);
Offset < BaseInsertOffset;
Offset += TII->GetInstSizeInBytes(*MI), MI = std::next(MI)) {
assert(MI != UserMBB->end() && "Fell off end of block");
if (CPUIndex < NumCPUsers && CPUsers[CPUIndex].MI == &*MI) {
CPUser &U = CPUsers[CPUIndex];
if (!isOffsetInRange(Offset, EndInsertOffset, U)) {
// Shift intertion point by one unit of alignment so it is within reach.
BaseInsertOffset -= 1u << LogAlign;
EndInsertOffset -= 1u << LogAlign;
}
// This is overly conservative, as we don't account for CPEMIs being
// reused within the block, but it doesn't matter much. Also assume CPEs
// are added in order with alignment padding. We may eventually be able
// to pack the aligned CPEs better.
EndInsertOffset += U.CPEMI->getOperand(2).getImm();
CPUIndex++;
}
// Remember the last IT instruction.
if (MI->getOpcode() == ARM::t2IT)
LastIT = &*MI;
}
--MI;
// Avoid splitting an IT block.
if (LastIT) {
unsigned PredReg = 0;
ARMCC::CondCodes CC = getITInstrPredicate(*MI, PredReg);
if (CC != ARMCC::AL)
MI = LastIT;
}
// We really must not split an IT block.
DEBUG(unsigned PredReg;
assert(!isThumb || getITInstrPredicate(*MI, PredReg) == ARMCC::AL));
NewMBB = splitBlockBeforeInstr(&*MI);
}
/// handleConstantPoolUser - Analyze the specified user, checking to see if it
/// is out-of-range. If so, pick up the constant pool value and move it some
/// place in-range. Return true if we changed any addresses (thus must run
/// another pass of branch lengthening), false otherwise.
bool ARMConstantIslands::handleConstantPoolUser(unsigned CPUserIndex,
bool CloserWater) {
CPUser &U = CPUsers[CPUserIndex];
MachineInstr *UserMI = U.MI;
MachineInstr *CPEMI = U.CPEMI;
unsigned CPI = getCombinedIndex(CPEMI);
unsigned Size = CPEMI->getOperand(2).getImm();
// Compute this only once, it's expensive.
unsigned UserOffset = getUserOffset(U);
// See if the current entry is within range, or there is a clone of it
// in range.
int result = findInRangeCPEntry(U, UserOffset);
if (result==1) return false;
else if (result==2) return true;
// No existing clone of this CPE is within range.
// We will be generating a new clone. Get a UID for it.
unsigned ID = AFI->createPICLabelUId();
// Look for water where we can place this CPE.
MachineBasicBlock *NewIsland = MF->CreateMachineBasicBlock();
MachineBasicBlock *NewMBB;
water_iterator IP;
if (findAvailableWater(U, UserOffset, IP, CloserWater)) {
DEBUG(dbgs() << "Found water in range\n");
MachineBasicBlock *WaterBB = *IP;
// If the original WaterList entry was "new water" on this iteration,
// propagate that to the new island. This is just keeping NewWaterList
// updated to match the WaterList, which will be updated below.
if (NewWaterList.erase(WaterBB))
NewWaterList.insert(NewIsland);
// The new CPE goes before the following block (NewMBB).
NewMBB = &*++WaterBB->getIterator();
} else {
// No water found.
DEBUG(dbgs() << "No water found\n");
createNewWater(CPUserIndex, UserOffset, NewMBB);
// splitBlockBeforeInstr adds to WaterList, which is important when it is
// called while handling branches so that the water will be seen on the
// next iteration for constant pools, but in this context, we don't want
// it. Check for this so it will be removed from the WaterList.
// Also remove any entry from NewWaterList.
MachineBasicBlock *WaterBB = &*--NewMBB->getIterator();
IP = std::find(WaterList.begin(), WaterList.end(), WaterBB);
if (IP != WaterList.end())
NewWaterList.erase(WaterBB);
// We are adding new water. Update NewWaterList.
NewWaterList.insert(NewIsland);
}
// Remove the original WaterList entry; we want subsequent insertions in
// this vicinity to go after the one we're about to insert. This
// considerably reduces the number of times we have to move the same CPE
// more than once and is also important to ensure the algorithm terminates.
if (IP != WaterList.end())
WaterList.erase(IP);
// Okay, we know we can put an island before NewMBB now, do it!
MF->insert(NewMBB->getIterator(), NewIsland);
// Update internal data structures to account for the newly inserted MBB.
updateForInsertedWaterBlock(NewIsland);
// Now that we have an island to add the CPE to, clone the original CPE and
// add it to the island.
U.HighWaterMark = NewIsland;
U.CPEMI = BuildMI(NewIsland, DebugLoc(), CPEMI->getDesc())
.addImm(ID).addOperand(CPEMI->getOperand(1)).addImm(Size);
CPEntries[CPI].push_back(CPEntry(U.CPEMI, ID, 1));
++NumCPEs;
// Decrement the old entry, and remove it if refcount becomes 0.
decrementCPEReferenceCount(CPI, CPEMI);
// Mark the basic block as aligned as required by the const-pool entry.
NewIsland->setAlignment(getCPELogAlign(U.CPEMI));
// Increase the size of the island block to account for the new entry.
BBInfo[NewIsland->getNumber()].Size += Size;
adjustBBOffsetsAfter(&*--NewIsland->getIterator());
// Finally, change the CPI in the instruction operand to be ID.
for (unsigned i = 0, e = UserMI->getNumOperands(); i != e; ++i)
if (UserMI->getOperand(i).isCPI()) {
UserMI->getOperand(i).setIndex(ID);
break;
}
DEBUG(dbgs() << " Moved CPE to #" << ID << " CPI=" << CPI
<< format(" offset=%#x\n", BBInfo[NewIsland->getNumber()].Offset));
return true;
}
/// removeDeadCPEMI - Remove a dead constant pool entry instruction. Update
/// sizes and offsets of impacted basic blocks.
void ARMConstantIslands::removeDeadCPEMI(MachineInstr *CPEMI) {
MachineBasicBlock *CPEBB = CPEMI->getParent();
unsigned Size = CPEMI->getOperand(2).getImm();
CPEMI->eraseFromParent();
BBInfo[CPEBB->getNumber()].Size -= Size;
// All succeeding offsets have the current size value added in, fix this.
if (CPEBB->empty()) {
BBInfo[CPEBB->getNumber()].Size = 0;
// This block no longer needs to be aligned.
CPEBB->setAlignment(0);
} else
// Entries are sorted by descending alignment, so realign from the front.
CPEBB->setAlignment(getCPELogAlign(&*CPEBB->begin()));
adjustBBOffsetsAfter(CPEBB);
// An island has only one predecessor BB and one successor BB. Check if
// this BB's predecessor jumps directly to this BB's successor. This
// shouldn't happen currently.
assert(!BBIsJumpedOver(CPEBB) && "How did this happen?");
// FIXME: remove the empty blocks after all the work is done?
}
/// removeUnusedCPEntries - Remove constant pool entries whose refcounts
/// are zero.
bool ARMConstantIslands::removeUnusedCPEntries() {
unsigned MadeChange = false;
for (unsigned i = 0, e = CPEntries.size(); i != e; ++i) {
std::vector<CPEntry> &CPEs = CPEntries[i];
for (unsigned j = 0, ee = CPEs.size(); j != ee; ++j) {
if (CPEs[j].RefCount == 0 && CPEs[j].CPEMI) {
removeDeadCPEMI(CPEs[j].CPEMI);
CPEs[j].CPEMI = nullptr;
MadeChange = true;
}
}
}
return MadeChange;
}
/// isBBInRange - Returns true if the distance between specific MI and
/// specific BB can fit in MI's displacement field.
bool ARMConstantIslands::isBBInRange(MachineInstr *MI,MachineBasicBlock *DestBB,
unsigned MaxDisp) {
unsigned PCAdj = isThumb ? 4 : 8;
unsigned BrOffset = getOffsetOf(MI) + PCAdj;
unsigned DestOffset = BBInfo[DestBB->getNumber()].Offset;
DEBUG(dbgs() << "Branch of destination BB#" << DestBB->getNumber()
<< " from BB#" << MI->getParent()->getNumber()
<< " max delta=" << MaxDisp
<< " from " << getOffsetOf(MI) << " to " << DestOffset
<< " offset " << int(DestOffset-BrOffset) << "\t" << *MI);
if (BrOffset <= DestOffset) {
// Branch before the Dest.
if (DestOffset-BrOffset <= MaxDisp)
return true;
} else {
if (BrOffset-DestOffset <= MaxDisp)
return true;
}
return false;
}
/// fixupImmediateBr - Fix up an immediate branch whose destination is too far
/// away to fit in its displacement field.
bool ARMConstantIslands::fixupImmediateBr(ImmBranch &Br) {
MachineInstr *MI = Br.MI;
MachineBasicBlock *DestBB = MI->getOperand(0).getMBB();
// Check to see if the DestBB is already in-range.
if (isBBInRange(MI, DestBB, Br.MaxDisp))
return false;
if (!Br.isCond)
return fixupUnconditionalBr(Br);
return fixupConditionalBr(Br);
}
/// fixupUnconditionalBr - Fix up an unconditional branch whose destination is
/// too far away to fit in its displacement field. If the LR register has been
/// spilled in the epilogue, then we can use BL to implement a far jump.
/// Otherwise, add an intermediate branch instruction to a branch.
bool
ARMConstantIslands::fixupUnconditionalBr(ImmBranch &Br) {
MachineInstr *MI = Br.MI;
MachineBasicBlock *MBB = MI->getParent();
if (!isThumb1)
llvm_unreachable("fixupUnconditionalBr is Thumb1 only!");
// Use BL to implement far jump.
Br.MaxDisp = (1 << 21) * 2;
MI->setDesc(TII->get(ARM::tBfar));
BBInfo[MBB->getNumber()].Size += 2;
adjustBBOffsetsAfter(MBB);
HasFarJump = true;
++NumUBrFixed;
DEBUG(dbgs() << " Changed B to long jump " << *MI);
return true;
}
/// fixupConditionalBr - Fix up a conditional branch whose destination is too
/// far away to fit in its displacement field. It is converted to an inverse
/// conditional branch + an unconditional branch to the destination.
bool
ARMConstantIslands::fixupConditionalBr(ImmBranch &Br) {
MachineInstr *MI = Br.MI;
MachineBasicBlock *DestBB = MI->getOperand(0).getMBB();
// Add an unconditional branch to the destination and invert the branch
// condition to jump over it:
// blt L1
// =>
// bge L2
// b L1
// L2:
ARMCC::CondCodes CC = (ARMCC::CondCodes)MI->getOperand(1).getImm();
CC = ARMCC::getOppositeCondition(CC);
unsigned CCReg = MI->getOperand(2).getReg();
// If the branch is at the end of its MBB and that has a fall-through block,
// direct the updated conditional branch to the fall-through block. Otherwise,
// split the MBB before the next instruction.
MachineBasicBlock *MBB = MI->getParent();
MachineInstr *BMI = &MBB->back();
bool NeedSplit = (BMI != MI) || !BBHasFallthrough(MBB);
++NumCBrFixed;
if (BMI != MI) {
if (std::next(MachineBasicBlock::iterator(MI)) == std::prev(MBB->end()) &&
BMI->getOpcode() == Br.UncondBr) {
// Last MI in the BB is an unconditional branch. Can we simply invert the
// condition and swap destinations:
// beq L1
// b L2
// =>
// bne L2
// b L1
MachineBasicBlock *NewDest = BMI->getOperand(0).getMBB();
if (isBBInRange(MI, NewDest, Br.MaxDisp)) {
DEBUG(dbgs() << " Invert Bcc condition and swap its destination with "
<< *BMI);
BMI->getOperand(0).setMBB(DestBB);
MI->getOperand(0).setMBB(NewDest);
MI->getOperand(1).setImm(CC);
return true;
}
}
}
if (NeedSplit) {
splitBlockBeforeInstr(MI);
// No need for the branch to the next block. We're adding an unconditional
// branch to the destination.
int delta = TII->GetInstSizeInBytes(MBB->back());
BBInfo[MBB->getNumber()].Size -= delta;
MBB->back().eraseFromParent();
// BBInfo[SplitBB].Offset is wrong temporarily, fixed below
}
MachineBasicBlock *NextBB = &*++MBB->getIterator();
DEBUG(dbgs() << " Insert B to BB#" << DestBB->getNumber()
<< " also invert condition and change dest. to BB#"
<< NextBB->getNumber() << "\n");
// Insert a new conditional branch and a new unconditional branch.
// Also update the ImmBranch as well as adding a new entry for the new branch.
BuildMI(MBB, DebugLoc(), TII->get(MI->getOpcode()))
.addMBB(NextBB).addImm(CC).addReg(CCReg);
Br.MI = &MBB->back();
BBInfo[MBB->getNumber()].Size += TII->GetInstSizeInBytes(MBB->back());
if (isThumb)
BuildMI(MBB, DebugLoc(), TII->get(Br.UncondBr)).addMBB(DestBB)
.addImm(ARMCC::AL).addReg(0);
else
BuildMI(MBB, DebugLoc(), TII->get(Br.UncondBr)).addMBB(DestBB);
BBInfo[MBB->getNumber()].Size += TII->GetInstSizeInBytes(MBB->back());
unsigned MaxDisp = getUnconditionalBrDisp(Br.UncondBr);
ImmBranches.push_back(ImmBranch(&MBB->back(), MaxDisp, false, Br.UncondBr));
// Remove the old conditional branch. It may or may not still be in MBB.
BBInfo[MI->getParent()->getNumber()].Size -= TII->GetInstSizeInBytes(*MI);
MI->eraseFromParent();
adjustBBOffsetsAfter(MBB);
return true;
}
/// undoLRSpillRestore - Remove Thumb push / pop instructions that only spills
/// LR / restores LR to pc. FIXME: This is done here because it's only possible
/// to do this if tBfar is not used.
bool ARMConstantIslands::undoLRSpillRestore() {
bool MadeChange = false;
for (unsigned i = 0, e = PushPopMIs.size(); i != e; ++i) {
MachineInstr *MI = PushPopMIs[i];
// First two operands are predicates.
if (MI->getOpcode() == ARM::tPOP_RET &&
MI->getOperand(2).getReg() == ARM::PC &&
MI->getNumExplicitOperands() == 3) {
// Create the new insn and copy the predicate from the old.
BuildMI(MI->getParent(), MI->getDebugLoc(), TII->get(ARM::tBX_RET))
.addOperand(MI->getOperand(0))
.addOperand(MI->getOperand(1));
MI->eraseFromParent();
MadeChange = true;
}
}
return MadeChange;
}
// mayOptimizeThumb2Instruction - Returns true if optimizeThumb2Instructions
// below may shrink MI.
bool
ARMConstantIslands::mayOptimizeThumb2Instruction(const MachineInstr *MI) const {
switch(MI->getOpcode()) {
// optimizeThumb2Instructions.
case ARM::t2LEApcrel:
case ARM::t2LDRpci:
// optimizeThumb2Branches.
case ARM::t2B:
case ARM::t2Bcc:
case ARM::tBcc:
// optimizeThumb2JumpTables.
case ARM::t2BR_JT:
return true;
}
return false;
}
bool ARMConstantIslands::optimizeThumb2Instructions() {
bool MadeChange = false;
// Shrink ADR and LDR from constantpool.
for (unsigned i = 0, e = CPUsers.size(); i != e; ++i) {
CPUser &U = CPUsers[i];
unsigned Opcode = U.MI->getOpcode();
unsigned NewOpc = 0;
unsigned Scale = 1;
unsigned Bits = 0;
switch (Opcode) {
default: break;
case ARM::t2LEApcrel:
if (isARMLowRegister(U.MI->getOperand(0).getReg())) {
NewOpc = ARM::tLEApcrel;
Bits = 8;
Scale = 4;
}
break;
case ARM::t2LDRpci:
if (isARMLowRegister(U.MI->getOperand(0).getReg())) {
NewOpc = ARM::tLDRpci;
Bits = 8;
Scale = 4;
}
break;
}
if (!NewOpc)
continue;
unsigned UserOffset = getUserOffset(U);
unsigned MaxOffs = ((1 << Bits) - 1) * Scale;
// Be conservative with inline asm.
if (!U.KnownAlignment)
MaxOffs -= 2;
// FIXME: Check if offset is multiple of scale if scale is not 4.
if (isCPEntryInRange(U.MI, UserOffset, U.CPEMI, MaxOffs, false, true)) {
DEBUG(dbgs() << "Shrink: " << *U.MI);
U.MI->setDesc(TII->get(NewOpc));
MachineBasicBlock *MBB = U.MI->getParent();
BBInfo[MBB->getNumber()].Size -= 2;
adjustBBOffsetsAfter(MBB);
++NumT2CPShrunk;
MadeChange = true;
}
}
return MadeChange;
}
bool ARMConstantIslands::optimizeThumb2Branches() {
bool MadeChange = false;
// The order in which branches appear in ImmBranches is approximately their
// order within the function body. By visiting later branches first, we reduce
// the distance between earlier forward branches and their targets, making it
// more likely that the cbn?z optimization, which can only apply to forward
// branches, will succeed.
for (unsigned i = ImmBranches.size(); i != 0; --i) {
ImmBranch &Br = ImmBranches[i-1];
unsigned Opcode = Br.MI->getOpcode();
unsigned NewOpc = 0;
unsigned Scale = 1;
unsigned Bits = 0;
switch (Opcode) {
default: break;
case ARM::t2B:
NewOpc = ARM::tB;
Bits = 11;
Scale = 2;
break;
case ARM::t2Bcc: {
NewOpc = ARM::tBcc;
Bits = 8;
Scale = 2;
break;
}
}
if (NewOpc) {
unsigned MaxOffs = ((1 << (Bits-1))-1) * Scale;
MachineBasicBlock *DestBB = Br.MI->getOperand(0).getMBB();
if (isBBInRange(Br.MI, DestBB, MaxOffs)) {
DEBUG(dbgs() << "Shrink branch: " << *Br.MI);
Br.MI->setDesc(TII->get(NewOpc));
MachineBasicBlock *MBB = Br.MI->getParent();
BBInfo[MBB->getNumber()].Size -= 2;
adjustBBOffsetsAfter(MBB);
++NumT2BrShrunk;
MadeChange = true;
}
}
Opcode = Br.MI->getOpcode();
if (Opcode != ARM::tBcc)
continue;
// If the conditional branch doesn't kill CPSR, then CPSR can be liveout
// so this transformation is not safe.
if (!Br.MI->killsRegister(ARM::CPSR))
continue;
NewOpc = 0;
unsigned PredReg = 0;
ARMCC::CondCodes Pred = getInstrPredicate(*Br.MI, PredReg);
if (Pred == ARMCC::EQ)
NewOpc = ARM::tCBZ;
else if (Pred == ARMCC::NE)
NewOpc = ARM::tCBNZ;
if (!NewOpc)
continue;
MachineBasicBlock *DestBB = Br.MI->getOperand(0).getMBB();
// Check if the distance is within 126. Subtract starting offset by 2
// because the cmp will be eliminated.
unsigned BrOffset = getOffsetOf(Br.MI) + 4 - 2;
unsigned DestOffset = BBInfo[DestBB->getNumber()].Offset;
if (BrOffset < DestOffset && (DestOffset - BrOffset) <= 126) {
MachineBasicBlock::iterator CmpMI = Br.MI;
if (CmpMI != Br.MI->getParent()->begin()) {
--CmpMI;
if (CmpMI->getOpcode() == ARM::tCMPi8) {
unsigned Reg = CmpMI->getOperand(0).getReg();
Pred = getInstrPredicate(*CmpMI, PredReg);
if (Pred == ARMCC::AL &&
CmpMI->getOperand(1).getImm() == 0 &&
isARMLowRegister(Reg)) {
MachineBasicBlock *MBB = Br.MI->getParent();
DEBUG(dbgs() << "Fold: " << *CmpMI << " and: " << *Br.MI);
MachineInstr *NewBR =
BuildMI(*MBB, CmpMI, Br.MI->getDebugLoc(), TII->get(NewOpc))
.addReg(Reg).addMBB(DestBB,Br.MI->getOperand(0).getTargetFlags());
CmpMI->eraseFromParent();
Br.MI->eraseFromParent();
Br.MI = NewBR;
BBInfo[MBB->getNumber()].Size -= 2;
adjustBBOffsetsAfter(MBB);
++NumCBZ;
MadeChange = true;
}
}
}
}
}
return MadeChange;
}
static bool isSimpleIndexCalc(MachineInstr &I, unsigned EntryReg,
unsigned BaseReg) {
if (I.getOpcode() != ARM::t2ADDrs)
return false;
if (I.getOperand(0).getReg() != EntryReg)
return false;
if (I.getOperand(1).getReg() != BaseReg)
return false;
// FIXME: what about CC and IdxReg?
return true;
}
/// \brief While trying to form a TBB/TBH instruction, we may (if the table
/// doesn't immediately follow the BR_JT) need access to the start of the
/// jump-table. We know one instruction that produces such a register; this
/// function works out whether that definition can be preserved to the BR_JT,
/// possibly by removing an intervening addition (which is usually needed to
/// calculate the actual entry to jump to).
bool ARMConstantIslands::preserveBaseRegister(MachineInstr *JumpMI,
MachineInstr *LEAMI,
unsigned &DeadSize,
bool &CanDeleteLEA,
bool &BaseRegKill) {
if (JumpMI->getParent() != LEAMI->getParent())
return false;
// Now we hope that we have at least these instructions in the basic block:
// BaseReg = t2LEA ...
// [...]
// EntryReg = t2ADDrs BaseReg, ...
// [...]
// t2BR_JT EntryReg
//
// We have to be very conservative about what we recognise here though. The
// main perturbing factors to watch out for are:
// + Spills at any point in the chain: not direct problems but we would
// expect a blocking Def of the spilled register so in practice what we
// can do is limited.
// + EntryReg == BaseReg: this is the one situation we should allow a Def
// of BaseReg, but only if the t2ADDrs can be removed.
// + Some instruction other than t2ADDrs computing the entry. Not seen in
// the wild, but we should be careful.
unsigned EntryReg = JumpMI->getOperand(0).getReg();
unsigned BaseReg = LEAMI->getOperand(0).getReg();
CanDeleteLEA = true;
BaseRegKill = false;
MachineInstr *RemovableAdd = nullptr;
MachineBasicBlock::iterator I(LEAMI);
for (++I; &*I != JumpMI; ++I) {
if (isSimpleIndexCalc(*I, EntryReg, BaseReg)) {
RemovableAdd = &*I;
break;
}
for (unsigned K = 0, E = I->getNumOperands(); K != E; ++K) {
const MachineOperand &MO = I->getOperand(K);
if (!MO.isReg() || !MO.getReg())
continue;
if (MO.isDef() && MO.getReg() == BaseReg)
return false;
if (MO.isUse() && MO.getReg() == BaseReg) {
BaseRegKill = BaseRegKill || MO.isKill();
CanDeleteLEA = false;
}
}
}
if (!RemovableAdd)
return true;
// Check the add really is removable, and that nothing else in the block
// clobbers BaseReg.
for (++I; &*I != JumpMI; ++I) {
for (unsigned K = 0, E = I->getNumOperands(); K != E; ++K) {
const MachineOperand &MO = I->getOperand(K);
if (!MO.isReg() || !MO.getReg())
continue;
if (MO.isDef() && MO.getReg() == BaseReg)
return false;
if (MO.isUse() && MO.getReg() == EntryReg)
RemovableAdd = nullptr;
}
}
if (RemovableAdd) {
RemovableAdd->eraseFromParent();
DeadSize += 4;
} else if (BaseReg == EntryReg) {
// The add wasn't removable, but clobbered the base for the TBB. So we can't
// preserve it.
return false;
}
// We reached the end of the block without seeing another definition of
// BaseReg (except, possibly the t2ADDrs, which was removed). BaseReg can be
// used in the TBB/TBH if necessary.
return true;
}
/// \brief Returns whether CPEMI is the first instruction in the block
/// immediately following JTMI (assumed to be a TBB or TBH terminator). If so,
/// we can switch the first register to PC and usually remove the address
/// calculation that preceded it.
static bool jumpTableFollowsTB(MachineInstr *JTMI, MachineInstr *CPEMI) {
MachineFunction::iterator MBB = JTMI->getParent()->getIterator();
MachineFunction *MF = MBB->getParent();
++MBB;
return MBB != MF->end() && MBB->begin() != MBB->end() &&
&*MBB->begin() == CPEMI;
}
/// optimizeThumb2JumpTables - Use tbb / tbh instructions to generate smaller
/// jumptables when it's possible.
bool ARMConstantIslands::optimizeThumb2JumpTables() {
bool MadeChange = false;
// FIXME: After the tables are shrunk, can we get rid some of the
// constantpool tables?
MachineJumpTableInfo *MJTI = MF->getJumpTableInfo();
if (!MJTI) return false;
const std::vector<MachineJumpTableEntry> &JT = MJTI->getJumpTables();
for (unsigned i = 0, e = T2JumpTables.size(); i != e; ++i) {
MachineInstr *MI = T2JumpTables[i];
const MCInstrDesc &MCID = MI->getDesc();
unsigned NumOps = MCID.getNumOperands();
unsigned JTOpIdx = NumOps - (MI->isPredicable() ? 2 : 1);
MachineOperand JTOP = MI->getOperand(JTOpIdx);
unsigned JTI = JTOP.getIndex();
assert(JTI < JT.size());
bool ByteOk = true;
bool HalfWordOk = true;
unsigned JTOffset = getOffsetOf(MI) + 4;
const std::vector<MachineBasicBlock*> &JTBBs = JT[JTI].MBBs;
for (unsigned j = 0, ee = JTBBs.size(); j != ee; ++j) {
MachineBasicBlock *MBB = JTBBs[j];
unsigned DstOffset = BBInfo[MBB->getNumber()].Offset;
// Negative offset is not ok. FIXME: We should change BB layout to make
// sure all the branches are forward.
if (ByteOk && (DstOffset - JTOffset) > ((1<<8)-1)*2)
ByteOk = false;
unsigned TBHLimit = ((1<<16)-1)*2;
if (HalfWordOk && (DstOffset - JTOffset) > TBHLimit)
HalfWordOk = false;
if (!ByteOk && !HalfWordOk)
break;
}
if (!ByteOk && !HalfWordOk)
continue;
MachineBasicBlock *MBB = MI->getParent();
if (!MI->getOperand(0).isKill()) // FIXME: needed now?
continue;
unsigned IdxReg = MI->getOperand(1).getReg();
bool IdxRegKill = MI->getOperand(1).isKill();
CPUser &User = CPUsers[JumpTableUserIndices[JTI]];
unsigned DeadSize = 0;
bool CanDeleteLEA = false;
bool BaseRegKill = false;
bool PreservedBaseReg =
preserveBaseRegister(MI, User.MI, DeadSize, CanDeleteLEA, BaseRegKill);
if (!jumpTableFollowsTB(MI, User.CPEMI) && !PreservedBaseReg)
continue;
DEBUG(dbgs() << "Shrink JT: " << *MI);
MachineInstr *CPEMI = User.CPEMI;
unsigned Opc = ByteOk ? ARM::t2TBB_JT : ARM::t2TBH_JT;
MachineBasicBlock::iterator MI_JT = MI;
MachineInstr *NewJTMI =
BuildMI(*MBB, MI_JT, MI->getDebugLoc(), TII->get(Opc))
.addReg(User.MI->getOperand(0).getReg(),
getKillRegState(BaseRegKill))
.addReg(IdxReg, getKillRegState(IdxRegKill))
.addJumpTableIndex(JTI, JTOP.getTargetFlags())
.addImm(CPEMI->getOperand(0).getImm());
DEBUG(dbgs() << "BB#" << MBB->getNumber() << ": " << *NewJTMI);
unsigned JTOpc = ByteOk ? ARM::JUMPTABLE_TBB : ARM::JUMPTABLE_TBH;
CPEMI->setDesc(TII->get(JTOpc));
if (jumpTableFollowsTB(MI, User.CPEMI)) {
NewJTMI->getOperand(0).setReg(ARM::PC);
NewJTMI->getOperand(0).setIsKill(false);
if (CanDeleteLEA) {
User.MI->eraseFromParent();
DeadSize += 4;
// The LEA was eliminated, the TBB instruction becomes the only new user
// of the jump table.
User.MI = NewJTMI;
User.MaxDisp = 4;
User.NegOk = false;
User.IsSoImm = false;
User.KnownAlignment = false;
} else {
// The LEA couldn't be eliminated, so we must add another CPUser to
// record the TBB or TBH use.
int CPEntryIdx = JumpTableEntryIndices[JTI];
auto &CPEs = CPEntries[CPEntryIdx];
auto Entry = std::find_if(CPEs.begin(), CPEs.end(), [&](CPEntry &E) {
return E.CPEMI == User.CPEMI;
});
++Entry->RefCount;
CPUsers.emplace_back(CPUser(NewJTMI, User.CPEMI, 4, false, false));
}
}
unsigned NewSize = TII->GetInstSizeInBytes(*NewJTMI);
unsigned OrigSize = TII->GetInstSizeInBytes(*MI);
MI->eraseFromParent();
int Delta = OrigSize - NewSize + DeadSize;
BBInfo[MBB->getNumber()].Size -= Delta;
adjustBBOffsetsAfter(MBB);
++NumTBs;
MadeChange = true;
}
return MadeChange;
}
/// reorderThumb2JumpTables - Adjust the function's block layout to ensure that
/// jump tables always branch forwards, since that's what tbb and tbh need.
bool ARMConstantIslands::reorderThumb2JumpTables() {
bool MadeChange = false;
MachineJumpTableInfo *MJTI = MF->getJumpTableInfo();
if (!MJTI) return false;
const std::vector<MachineJumpTableEntry> &JT = MJTI->getJumpTables();
for (unsigned i = 0, e = T2JumpTables.size(); i != e; ++i) {
MachineInstr *MI = T2JumpTables[i];
const MCInstrDesc &MCID = MI->getDesc();
unsigned NumOps = MCID.getNumOperands();
unsigned JTOpIdx = NumOps - (MI->isPredicable() ? 2 : 1);
MachineOperand JTOP = MI->getOperand(JTOpIdx);
unsigned JTI = JTOP.getIndex();
assert(JTI < JT.size());
// We prefer if target blocks for the jump table come after the jump
// instruction so we can use TB[BH]. Loop through the target blocks
// and try to adjust them such that that's true.
int JTNumber = MI->getParent()->getNumber();
const std::vector<MachineBasicBlock*> &JTBBs = JT[JTI].MBBs;
for (unsigned j = 0, ee = JTBBs.size(); j != ee; ++j) {
MachineBasicBlock *MBB = JTBBs[j];
int DTNumber = MBB->getNumber();
if (DTNumber < JTNumber) {
// The destination precedes the switch. Try to move the block forward
// so we have a positive offset.
MachineBasicBlock *NewBB =
adjustJTTargetBlockForward(MBB, MI->getParent());
if (NewBB)
MJTI->ReplaceMBBInJumpTable(JTI, JTBBs[j], NewBB);
MadeChange = true;
}
}
}
return MadeChange;
}
MachineBasicBlock *ARMConstantIslands::
adjustJTTargetBlockForward(MachineBasicBlock *BB, MachineBasicBlock *JTBB) {
// If the destination block is terminated by an unconditional branch,
// try to move it; otherwise, create a new block following the jump
// table that branches back to the actual target. This is a very simple
// heuristic. FIXME: We can definitely improve it.
MachineBasicBlock *TBB = nullptr, *FBB = nullptr;
SmallVector<MachineOperand, 4> Cond;
SmallVector<MachineOperand, 4> CondPrior;
MachineFunction::iterator BBi = BB->getIterator();
MachineFunction::iterator OldPrior = std::prev(BBi);
// If the block terminator isn't analyzable, don't try to move the block
bool B = TII->analyzeBranch(*BB, TBB, FBB, Cond);
// If the block ends in an unconditional branch, move it. The prior block
// has to have an analyzable terminator for us to move this one. Be paranoid
// and make sure we're not trying to move the entry block of the function.
if (!B && Cond.empty() && BB != &MF->front() &&
!TII->analyzeBranch(*OldPrior, TBB, FBB, CondPrior)) {
BB->moveAfter(JTBB);
OldPrior->updateTerminator();
BB->updateTerminator();
// Update numbering to account for the block being moved.
MF->RenumberBlocks();
++NumJTMoved;
return nullptr;
}
// Create a new MBB for the code after the jump BB.
MachineBasicBlock *NewBB =
MF->CreateMachineBasicBlock(JTBB->getBasicBlock());
MachineFunction::iterator MBBI = ++JTBB->getIterator();
MF->insert(MBBI, NewBB);
// Add an unconditional branch from NewBB to BB.
// There doesn't seem to be meaningful DebugInfo available; this doesn't
// correspond directly to anything in the source.
assert (isThumb2 && "Adjusting for TB[BH] but not in Thumb2?");
BuildMI(NewBB, DebugLoc(), TII->get(ARM::t2B)).addMBB(BB)
.addImm(ARMCC::AL).addReg(0);
// Update internal data structures to account for the newly inserted MBB.
MF->RenumberBlocks(NewBB);
// Update the CFG.
NewBB->addSuccessor(BB);
JTBB->replaceSuccessor(BB, NewBB);
++NumJTInserted;
return NewBB;
}