/*
*
* Copyright 2015 gRPC authors.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
/**
* The gRPC protocol is an RPC protocol on top of HTTP2.
*
* While the most common type of RPC receives only one request message and returns only one response
* message, the protocol also supports RPCs that return multiple individual messages in a streaming
* fashion, RPCs that accept a stream of request messages, or RPCs with both streaming requests and
* responses.
*
* Conceptually, each gRPC call consists of a bidirectional stream of binary messages, with RPCs of
* the "non-streaming type" sending only one message in the corresponding direction (the protocol
* doesn't make any distinction).
*
* Each RPC uses a different HTTP2 stream, and thus multiple simultaneous RPCs can be multiplexed
* transparently on the same TCP connection.
*/
#import <Foundation/Foundation.h>
#import <RxLibrary/GRXWriter.h>
#include <AvailabilityMacros.h>
#pragma mark gRPC errors
/** Domain of NSError objects produced by gRPC. */
extern NSString *const kGRPCErrorDomain;
/**
* gRPC error codes.
* Note that a few of these are never produced by the gRPC libraries, but are of general utility for
* server applications to produce.
*/
typedef NS_ENUM(NSUInteger, GRPCErrorCode) {
/** The operation was cancelled (typically by the caller). */
GRPCErrorCodeCancelled = 1,
/**
* Unknown error. Errors raised by APIs that do not return enough error information may be
* converted to this error.
*/
GRPCErrorCodeUnknown = 2,
/**
* The client specified an invalid argument. Note that this differs from FAILED_PRECONDITION.
* INVALID_ARGUMENT indicates arguments that are problematic regardless of the state of the
* server (e.g., a malformed file name).
*/
GRPCErrorCodeInvalidArgument = 3,
/**
* Deadline expired before operation could complete. For operations that change the state of the
* server, this error may be returned even if the operation has completed successfully. For
* example, a successful response from the server could have been delayed long enough for the
* deadline to expire.
*/
GRPCErrorCodeDeadlineExceeded = 4,
/** Some requested entity (e.g., file or directory) was not found. */
GRPCErrorCodeNotFound = 5,
/** Some entity that we attempted to create (e.g., file or directory) already exists. */
GRPCErrorCodeAlreadyExists = 6,
/**
* The caller does not have permission to execute the specified operation. PERMISSION_DENIED isn't
* used for rejections caused by exhausting some resource (RESOURCE_EXHAUSTED is used instead for
* those errors). PERMISSION_DENIED doesn't indicate a failure to identify the caller
* (UNAUTHENTICATED is used instead for those errors).
*/
GRPCErrorCodePermissionDenied = 7,
/**
* The request does not have valid authentication credentials for the operation (e.g. the caller's
* identity can't be verified).
*/
GRPCErrorCodeUnauthenticated = 16,
/** Some resource has been exhausted, perhaps a per-user quota. */
GRPCErrorCodeResourceExhausted = 8,
/**
* The RPC was rejected because the server is not in a state required for the procedure's
* execution. For example, a directory to be deleted may be non-empty, etc.
* The client should not retry until the server state has been explicitly fixed (e.g. by
* performing another RPC). The details depend on the service being called, and should be found in
* the NSError's userInfo.
*/
GRPCErrorCodeFailedPrecondition = 9,
/**
* The RPC was aborted, typically due to a concurrency issue like sequencer check failures,
* transaction aborts, etc. The client should retry at a higher-level (e.g., restarting a read-
* modify-write sequence).
*/
GRPCErrorCodeAborted = 10,
/**
* The RPC was attempted past the valid range. E.g., enumerating past the end of a list.
* Unlike INVALID_ARGUMENT, this error indicates a problem that may be fixed if the system state
* changes. For example, an RPC to get elements of a list will generate INVALID_ARGUMENT if asked
* to return the element at a negative index, but it will generate OUT_OF_RANGE if asked to return
* the element at an index past the current size of the list.
*/
GRPCErrorCodeOutOfRange = 11,
/** The procedure is not implemented or not supported/enabled in this server. */
GRPCErrorCodeUnimplemented = 12,
/**
* Internal error. Means some invariant expected by the server application or the gRPC library has
* been broken.
*/
GRPCErrorCodeInternal = 13,
/**
* The server is currently unavailable. This is most likely a transient condition and may be
* corrected by retrying with a backoff.
*/
GRPCErrorCodeUnavailable = 14,
/** Unrecoverable data loss or corruption. */
GRPCErrorCodeDataLoss = 15,
};
/**
* Safety remark of a gRPC method as defined in RFC 2616 Section 9.1
*/
typedef NS_ENUM(NSUInteger, GRPCCallSafety) {
/** Signal that there is no guarantees on how the call affects the server state. */
GRPCCallSafetyDefault = 0,
/** Signal that the call is idempotent. gRPC is free to use PUT verb. */
GRPCCallSafetyIdempotentRequest = 1,
/** Signal that the call is cacheable and will not affect server state. gRPC is free to use GET
verb. */
GRPCCallSafetyCacheableRequest = 2,
};
/**
* Keys used in |NSError|'s |userInfo| dictionary to store the response headers and trailers sent by
* the server.
*/
extern id const kGRPCHeadersKey;
extern id const kGRPCTrailersKey;
#pragma mark GRPCCall
/** Represents a single gRPC remote call. */
@interface GRPCCall : GRXWriter
/**
* The authority for the RPC. If nil, the default authority will be used. This property must be nil
* when Cronet transport is enabled.
*/
@property(atomic, copy, readwrite) NSString *serverName;
/**
* The timeout for the RPC call in seconds. If set to 0, the call will not timeout. If set to
* positive, the gRPC call returns with status GRPCErrorCodeDeadlineExceeded if it is not completed
* within \a timeout seconds. A negative value is not allowed.
*/
@property NSTimeInterval timeout;
/**
* The container of the request headers of an RPC conforms to this protocol, which is a subset of
* NSMutableDictionary's interface. It will become a NSMutableDictionary later on.
* The keys of this container are the header names, which per the HTTP standard are case-
* insensitive. They are stored in lowercase (which is how HTTP/2 mandates them on the wire), and
* can only consist of ASCII characters.
* A header value is a NSString object (with only ASCII characters), unless the header name has the
* suffix "-bin", in which case the value has to be a NSData object.
*/
/**
* These HTTP headers will be passed to the server as part of this call. Each HTTP header is a
* name-value pair with string names and either string or binary values.
*
* The passed dictionary has to use NSString keys, corresponding to the header names. The value
* associated to each can be a NSString object or a NSData object. E.g.:
*
* call.requestHeaders = @{@"authorization": @"Bearer ..."};
*
* call.requestHeaders[@"my-header-bin"] = someData;
*
* After the call is started, trying to modify this property is an error.
*
* The property is initialized to an empty NSMutableDictionary.
*/
@property(atomic, readonly) NSMutableDictionary *requestHeaders;
/**
* This dictionary is populated with the HTTP headers received from the server. This happens before
* any response message is received from the server. It has the same structure as the request
* headers dictionary: Keys are NSString header names; names ending with the suffix "-bin" have a
* NSData value; the others have a NSString value.
*
* The value of this property is nil until all response headers are received, and will change before
* any of -writeValue: or -writesFinishedWithError: are sent to the writeable.
*/
@property(atomic, readonly) NSDictionary *responseHeaders;
/**
* Same as responseHeaders, but populated with the HTTP trailers received from the server before the
* call finishes.
*
* The value of this property is nil until all response trailers are received, and will change
* before -writesFinishedWithError: is sent to the writeable.
*/
@property(atomic, readonly) NSDictionary *responseTrailers;
/**
* The request writer has to write NSData objects into the provided Writeable. The server will
* receive each of those separately and in order as distinct messages.
* A gRPC call might not complete until the request writer finishes. On the other hand, the request
* finishing doesn't necessarily make the call to finish, as the server might continue sending
* messages to the response side of the call indefinitely (depending on the semantics of the
* specific remote method called).
* To finish a call right away, invoke cancel.
* host parameter should not contain the scheme (http:// or https://), only the name or IP addr
* and the port number, for example @"localhost:5050".
*/
- (instancetype)initWithHost:(NSString *)host
path:(NSString *)path
requestsWriter:(GRXWriter *)requestsWriter NS_DESIGNATED_INITIALIZER;
/**
* Finishes the request side of this call, notifies the server that the RPC should be cancelled, and
* finishes the response side of the call with an error of code CANCELED.
*/
- (void)cancel;
/**
* Set the call flag for a specific host path.
*
* Host parameter should not contain the scheme (http:// or https://), only the name or IP addr
* and the port number, for example @"localhost:5050".
*/
+ (void)setCallSafety:(GRPCCallSafety)callSafety host:(NSString *)host path:(NSString *)path;
/**
* Set the dispatch queue to be used for callbacks.
*
* This configuration is only effective before the call starts.
*/
- (void)setResponseDispatchQueue:(dispatch_queue_t)queue;
// TODO(jcanizales): Let specify a deadline. As a category of GRXWriter?
@end
#pragma mark Backwards compatibiity
/** This protocol is kept for backwards compatibility with existing code. */
DEPRECATED_MSG_ATTRIBUTE("Use NSDictionary or NSMutableDictionary instead.")
@protocol GRPCRequestHeaders<NSObject>
@property(nonatomic, readonly) NSUInteger count;
- (id)objectForKeyedSubscript:(id)key;
- (void)setObject:(id)obj forKeyedSubscript:(id)key;
- (void)removeAllObjects;
- (void)removeObjectForKey:(id)key;
@end
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wdeprecated"
/** This is only needed for backwards-compatibility. */
@interface NSMutableDictionary (GRPCRequestHeaders)<GRPCRequestHeaders>
@end
#pragma clang diagnostic pop