C++程序
|
2517行
|
146.81 KB
/** <at> file
* Defines and macros for the PCIe Marvell Yukon gigabit ethernet adapter product family
*
* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
/******************************************************************************
*
* LICENSE:
* Copyright (C) Marvell International Ltd. and/or its affiliates
*
* The computer program files contained in this folder ("Files")
* are provided to you under the BSD-type license terms provided
* below, and any use of such Files and any derivative works
* thereof created by you shall be governed by the following terms
* and conditions:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* - Neither the name of Marvell nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* /LICENSE
*
******************************************************************************/
/*-
* Copyright (c) 1997, 1998, 1999, 2000
* Bill Paul <wpaul <at> ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 2003 Nathan L. Binkert <binkertn <at> umich.edu>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/*$FreeBSD: src/sys/dev/msk/if_mskreg.h,v 1.27.2.10.2.1 2010/06/14 02:09:06 kensmith Exp $*/
#ifndef _IF_MSKREG_H_
#define _IF_MSKREG_H_
#include "miivar.h"
/*
* SysKonnect PCI vendor ID
*/
#define VENDORID_SK 0x1148
/*
* Marvell PCI vendor ID
*/
#define VENDORID_MARVELL 0x11AB
/*
* D-Link PCI vendor ID
*/
#define VENDORID_DLINK 0x1186
/*
* SysKonnect ethernet device IDs
*/
#define DEVICEID_SK_YUKON2 0x9000
#define DEVICEID_SK_YUKON2_EXPR 0x9e00
/*
* Marvell gigabit ethernet device IDs
*/
#define DEVICEID_MRVL_8021CU 0x4340
#define DEVICEID_MRVL_8022CU 0x4341
#define DEVICEID_MRVL_8061CU 0x4342
#define DEVICEID_MRVL_8062CU 0x4343
#define DEVICEID_MRVL_8021X 0x4344
#define DEVICEID_MRVL_8022X 0x4345
#define DEVICEID_MRVL_8061X 0x4346
#define DEVICEID_MRVL_8062X 0x4347
#define DEVICEID_MRVL_8035 0x4350
#define DEVICEID_MRVL_8036 0x4351
#define DEVICEID_MRVL_8038 0x4352
#define DEVICEID_MRVL_8039 0x4353
#define DEVICEID_MRVL_8040 0x4354
#define DEVICEID_MRVL_8040T 0x4355
#define DEVICEID_MRVL_8042 0x4357
#define DEVICEID_MRVL_8048 0x435A
#define DEVICEID_MRVL_4360 0x4360
#define DEVICEID_MRVL_4361 0x4361
#define DEVICEID_MRVL_4362 0x4362
#define DEVICEID_MRVL_4363 0x4363
#define DEVICEID_MRVL_4364 0x4364
#define DEVICEID_MRVL_4365 0x4365
#define DEVICEID_MRVL_436A 0x436A
#define DEVICEID_MRVL_436B 0x436B
#define DEVICEID_MRVL_436C 0x436C
#define DEVICEID_MRVL_4380 0x4380
#define DEVICEID_MRVL_4381 0x4381
/*
* D-Link gigabit ethernet device ID
*/
#define DEVICEID_DLINK_DGE550SX 0x4001
#define DEVICEID_DLINK_DGE560SX 0x4002
#define DEVICEID_DLINK_DGE560T 0x4b00
#define BIT_31 ((UINT32)1 << 31)
#define BIT_30 (1 << 30)
#define BIT_29 (1 << 29)
#define BIT_28 (1 << 28)
#define BIT_27 (1 << 27)
#define BIT_26 (1 << 26)
#define BIT_25 (1 << 25)
#define BIT_24 (1 << 24)
#define BIT_23 (1 << 23)
#define BIT_22 (1 << 22)
#define BIT_21 (1 << 21)
#define BIT_20 (1 << 20)
#define BIT_19 (1 << 19)
#define BIT_18 (1 << 18)
#define BIT_17 (1 << 17)
#define BIT_16 (1 << 16)
#define BIT_15 (1 << 15)
#define BIT_14 (1 << 14)
#define BIT_13 (1 << 13)
#define BIT_12 (1 << 12)
#define BIT_11 (1 << 11)
#define BIT_10 (1 << 10)
#define BIT_9 (1 << 9)
#define BIT_8 (1 << 8)
#define BIT_7 (1 << 7)
#define BIT_6 (1 << 6)
#define BIT_5 (1 << 5)
#define BIT_4 (1 << 4)
#define BIT_3 (1 << 3)
#define BIT_2 (1 << 2)
#define BIT_1 (1 << 1)
#define BIT_0 (1 << 0)
#define SHIFT31(x) ((x) << 31)
#define SHIFT30(x) ((x) << 30)
#define SHIFT29(x) ((x) << 29)
#define SHIFT28(x) ((x) << 28)
#define SHIFT27(x) ((x) << 27)
#define SHIFT26(x) ((x) << 26)
#define SHIFT25(x) ((x) << 25)
#define SHIFT24(x) ((x) << 24)
#define SHIFT23(x) ((x) << 23)
#define SHIFT22(x) ((x) << 22)
#define SHIFT21(x) ((x) << 21)
#define SHIFT20(x) ((x) << 20)
#define SHIFT19(x) ((x) << 19)
#define SHIFT18(x) ((x) << 18)
#define SHIFT17(x) ((x) << 17)
#define SHIFT16(x) ((x) << 16)
#define SHIFT15(x) ((x) << 15)
#define SHIFT14(x) ((x) << 14)
#define SHIFT13(x) ((x) << 13)
#define SHIFT12(x) ((x) << 12)
#define SHIFT11(x) ((x) << 11)
#define SHIFT10(x) ((x) << 10)
#define SHIFT9(x) ((x) << 9)
#define SHIFT8(x) ((x) << 8)
#define SHIFT7(x) ((x) << 7)
#define SHIFT6(x) ((x) << 6)
#define SHIFT5(x) ((x) << 5)
#define SHIFT4(x) ((x) << 4)
#define SHIFT3(x) ((x) << 3)
#define SHIFT2(x) ((x) << 2)
#define SHIFT1(x) ((x) << 1)
#define SHIFT0(x) ((x) << 0)
/*
* PCI Configuration Space header
*/
#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */
#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */
#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */
#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */
#define PCI_OUR_STATUS 0x7c /* 32 bit Adapter Status Register */
#define PCI_OUR_REG_3 0x80 /* 32 bit Our Register 3 */
#define PCI_OUR_REG_4 0x84 /* 32 bit Our Register 4 */
#define PCI_OUR_REG_5 0x88 /* 32 bit Our Register 5 */
#define PCI_CFG_REG_0 0x90 /* 32 bit Config Register 0 */
#define PCI_CFG_REG_1 0x94 /* 32 bit Config Register 1 */
/* PCI Express Capability */
#define PEX_CAP_ID 0xe0 /* 8 bit PEX Capability ID */
#define PEX_NITEM 0xe1 /* 8 bit PEX Next Item Pointer */
#define PEX_CAP_REG 0xe2 /* 16 bit PEX Capability Register */
#define PEX_DEV_CAP 0xe4 /* 32 bit PEX Device Capabilities */
#define PEX_DEV_CTRL 0xe8 /* 16 bit PEX Device Control */
#define PEX_DEV_STAT 0xea /* 16 bit PEX Device Status */
#define PEX_LNK_CAP 0xec /* 32 bit PEX Link Capabilities */
#define PEX_LNK_CTRL 0xf0 /* 16 bit PEX Link Control */
#define PEX_LNK_STAT 0xf2 /* 16 bit PEX Link Status */
/* PCI Express Extended Capabilities */
#define PEX_ADV_ERR_REP 0x100 /* 32 bit PEX Advanced Error Reporting */
#define PEX_UNC_ERR_STAT 0x104 /* 32 bit PEX Uncorr. Errors Status */
#define PEX_UNC_ERR_MASK 0x108 /* 32 bit PEX Uncorr. Errors Mask */
#define PEX_UNC_ERR_SEV 0x10c /* 32 bit PEX Uncorr. Errors Severity */
#define PEX_COR_ERR_STAT 0x110 /* 32 bit PEX Correc. Errors Status */
#define PEX_COR_ERR_MASK 0x114 /* 32 bit PEX Correc. Errors Mask */
#define PEX_ADV_ERR_CAP_C 0x118 /* 32 bit PEX Advanced Error Cap./Ctrl */
#define PEX_HEADER_LOG 0x11c /* 4x32 bit PEX Header Log Register */
/* PCI_OUR_REG_1 32 bit Our Register 1 */
#define PCI_Y2_PIG_ENA BIT_31 /* Enable Plug-in-Go (YUKON-2) */
#define PCI_Y2_DLL_DIS BIT_30 /* Disable PCI DLL (YUKON-2) */
#define PCI_Y2_PHY2_COMA BIT_29 /* Set PHY 2 to Coma Mode (YUKON-2) */
#define PCI_Y2_PHY1_COMA BIT_28 /* Set PHY 1 to Coma Mode (YUKON-2) */
#define PCI_Y2_PHY2_POWD BIT_27 /* Set PHY 2 to Power Down (YUKON-2) */
#define PCI_Y2_PHY1_POWD BIT_26 /* Set PHY 1 to Power Down (YUKON-2) */
#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */
#define PCI_EN_IO BIT_23 /* Mapping to I/O space */
#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */
/* 1 = Map Flash to memory */
/* 0 = Disable addr. dec */
#define PCI_PAGESIZE (3L<<20)/* Bit 21..20: FLASH Page Size */
#define PCI_PAGE_16 (0L<<20)/* 16 k pages */
#define PCI_PAGE_32K (1L<<20)/* 32 k pages */
#define PCI_PAGE_64K (2L<<20)/* 64 k pages */
#define PCI_PAGE_128K (3L<<20)/* 128 k pages */
#define PCI_PAGEREG (7L<<16)/* Bit 18..16: Page Register */
#define PCI_PEX_LEGNAT BIT_15 /* PEX PM legacy/native mode (YUKON-2) */
#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */
#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */
#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */
#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */
#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */
#define PCI_BURST_DIS BIT_9 /* Burst Disable */
#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */
#define PCI_SKEW_DAS (0xfL<<4)/* Bit 7.. 4: Skew Ctrl, DAS Ext */
#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */
#define PCI_CLS_OPT BIT_3 /* Cache Line Size opt. PCI-X (YUKON-2) */
/* PCI_OUR_REG_2 32 bit Our Register 2 */
#define PCI_VPD_WR_THR (0xff<<24) /* Bit 31..24: VPD Write Threshold */
#define PCI_DEV_SEL (0x7f<<17) /* Bit 23..17: EEPROM Device Select */
#define PCI_VPD_ROM_SZ (0x07<<14) /* Bit 16..14: VPD ROM Size */
/* Bit 13..12: reserved */
#define PCI_PATCH_DIR (0x0f<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */
#define PCI_PATCH_DIR_3 BIT_11
#define PCI_PATCH_DIR_2 BIT_10
#define PCI_PATCH_DIR_1 BIT_9
#define PCI_PATCH_DIR_0 BIT_8
#define PCI_EXT_PATCHS (0x0f<<4) /* Bit 7.. 4: Extended Patches 3..0 */
#define PCI_EXT_PATCH_3 BIT_7
#define PCI_EXT_PATCH_2 BIT_6
#define PCI_EXT_PATCH_1 BIT_5
#define PCI_EXT_PATCH_0 BIT_4
#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */
#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */
#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */
/* PCI_OUR_STATUS 32 bit Adapter Status Register (Yukon-2) */
#define PCI_OS_PCI64B BIT_31 /* Conventional PCI 64 bits Bus */
#define PCI_OS_PCIX BIT_30 /* PCI-X Bus */
#define PCI_OS_MODE_MSK (3<<28) /* Bit 29..28: PCI-X Bus Mode Mask */
#define PCI_OS_PCI66M BIT_27 /* PCI 66 MHz Bus */
#define PCI_OS_PCI_X BIT_26 /* PCI/PCI-X Bus (0 = PEX) */
#define PCI_OS_DLLE_MSK (3<<24) /* Bit 25..24: DLL Status Indication */
#define PCI_OS_DLLR_MSK (0x0f<<20) /* Bit 23..20: DLL Row Counters Values */
#define PCI_OS_DLLC_MSK (0x0f<<16) /* Bit 19..16: DLL Col. Counters Values */
#define PCI_OS_SPEED(val) ((val & PCI_OS_MODE_MSK) >> 28) /* PCI-X Speed */
/* possible values for the speed field of the register */
#define PCI_OS_SPD_PCI 0 /* PCI Conventional Bus */
#define PCI_OS_SPD_X66 1 /* PCI-X 66MHz Bus */
#define PCI_OS_SPD_X100 2 /* PCI-X 100MHz Bus */
#define PCI_OS_SPD_X133 3 /* PCI-X 133MHz Bus */
/* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */
#define PCI_TIMER_VALUE_MSK (0xff<<16) /* Bit 23..16: Timer Value Mask */
#define PCI_FORCE_ASPM_REQUEST BIT_15 /* Force ASPM Request (A1 only) */
#define PCI_ASPM_GPHY_LINK_DOWN BIT_14 /* GPHY Link Down (A1 only) */
#define PCI_ASPM_INT_FIFO_EMPTY BIT_13 /* Internal FIFO Empty (A1 only) */
#define PCI_ASPM_CLKRUN_REQUEST BIT_12 /* CLKRUN Request (A1 only) */
#define PCI_ASPM_FORCE_CLKREQ_ENA BIT_4 /* Force CLKREQ Enable (A1b only) */
#define PCI_ASPM_CLKREQ_PAD_CTL BIT_3 /* CLKREQ PAD Control (A1 only) */
#define PCI_ASPM_A1_MODE_SELECT BIT_2 /* A1 Mode Select (A1 only) */
#define PCI_CLK_GATE_PEX_UNIT_ENA BIT_1 /* Enable Gate PEX Unit Clock */
#define PCI_CLK_GATE_ROOT_COR_ENA BIT_0 /* Enable Gate Root Core Clock */
/* PCI_OUR_REG_5 32 bit Our Register 5 (Yukon-ECU only) */
/* Bit 31..27: for A3 & later */
#define PCI_CTL_DIV_CORE_CLK_ENA BIT_31 /* Divide Core Clock Enable */
#define PCI_CTL_SRESET_VMAIN_AV BIT_30 /* Soft Reset for Vmain_av De-Glitch */
#define PCI_CTL_BYPASS_VMAIN_AV BIT_29 /* Bypass En. for Vmain_av De-Glitch */
#define PCI_CTL_TIM_VMAIN_AV1 BIT_28 /* Bit 28..27: Timer Vmain_av Mask */
#define PCI_CTL_TIM_VMAIN_AV0 BIT_27 /* Bit 28..27: Timer Vmain_av Mask */
#define PCI_CTL_TIM_VMAIN_AV_MSK (BIT_28 | BIT_27)
/* Bit 26..16: Release Clock on Event */
#define PCI_REL_PCIE_RST_DE_ASS BIT_26 /* PCIe Reset De-Asserted */
#define PCI_REL_GPHY_REC_PACKET BIT_25 /* GPHY Received Packet */
#define PCI_REL_INT_FIFO_N_EMPTY BIT_24 /* Internal FIFO Not Empty */
#define PCI_REL_MAIN_PWR_AVAIL BIT_23 /* Main Power Available */
#define PCI_REL_CLKRUN_REQ_REL BIT_22 /* CLKRUN Request Release */
#define PCI_REL_PCIE_RESET_ASS BIT_21 /* PCIe Reset Asserted */
#define PCI_REL_PME_ASSERTED BIT_20 /* PME Asserted */
#define PCI_REL_PCIE_EXIT_L1_ST BIT_19 /* PCIe Exit L1 State */
#define PCI_REL_LOADER_NOT_FIN BIT_18 /* EPROM Loader Not Finished */
#define PCI_REL_PCIE_RX_EX_IDLE BIT_17 /* PCIe Rx Exit Electrical Idle State */
#define PCI_REL_GPHY_LINK_UP BIT_16 /* GPHY Link Up */
/* Bit 10.. 0: Mask for Gate Clock */
#define PCI_GAT_PCIE_RST_ASSERTED BIT_10 /* PCIe Reset Asserted */
#define PCI_GAT_GPHY_N_REC_PACKET BIT_9 /* GPHY Not Received Packet */
#define PCI_GAT_INT_FIFO_EMPTY BIT_8 /* Internal FIFO Empty */
#define PCI_GAT_MAIN_PWR_N_AVAIL BIT_7 /* Main Power Not Available */
#define PCI_GAT_CLKRUN_REQ_REL BIT_6 /* CLKRUN Not Requested */
#define PCI_GAT_PCIE_RESET_ASS BIT_5 /* PCIe Reset Asserted */
#define PCI_GAT_PME_DE_ASSERTED BIT_4 /* PME De-Asserted */
#define PCI_GAT_PCIE_ENTER_L1_ST BIT_3 /* PCIe Enter L1 State */
#define PCI_GAT_LOADER_FINISHED BIT_2 /* EPROM Loader Finished */
#define PCI_GAT_PCIE_RX_EL_IDLE BIT_1 /* PCIe Rx Electrical Idle State */
#define PCI_GAT_GPHY_LINK_DOWN BIT_0 /* GPHY Link Down */
/* PCI_CFG_REG_1 32 bit Config Register 1 */
#define PCI_CF1_DIS_REL_EVT_RST BIT_24 /* Dis. Rel. Event during PCIE reset */
/* Bit 23..21: Release Clock on Event */
#define PCI_CF1_REL_LDR_NOT_FIN BIT_23 /* EEPROM Loader Not Finished */
#define PCI_CF1_REL_VMAIN_AVLBL BIT_22 /* Vmain available */
#define PCI_CF1_REL_PCIE_RESET BIT_21 /* PCI-E reset */
/* Bit 20..18: Gate Clock on Event */
#define PCI_CF1_GAT_LDR_NOT_FIN BIT_20 /* EEPROM Loader Finished */
#define PCI_CF1_GAT_PCIE_RX_IDLE BIT_19 /* PCI-E Rx Electrical idle */
#define PCI_CF1_GAT_PCIE_RESET BIT_18 /* PCI-E Reset */
#define PCI_CF1_PRST_PHY_CLKREQ BIT_17 /* Enable PCI-E rst & PM2PHY gen. CLKREQ */
#define PCI_CF1_PCIE_RST_CLKREQ BIT_16 /* Enable PCI-E rst generate CLKREQ */
#define PCI_CF1_ENA_CFG_LDR_DONE BIT_8 /* Enable core level Config loader done */
#define PCI_CF1_ENA_TXBMU_RD_IDLE BIT_1 /* Enable TX BMU Read IDLE for ASPM */
#define PCI_CF1_ENA_TXBMU_WR_IDLE BIT_0 /* Enable TX BMU Write IDLE for ASPM */
/* PEX_DEV_CTRL 16 bit PEX Device Control (Yukon-2) */
#define PEX_DC_MAX_RRS_MSK (7<<12) /* Bit 14..12: Max. Read Request Size */
#define PEX_DC_EN_NO_SNOOP BIT_11 /* Enable No Snoop */
#define PEX_DC_EN_AUX_POW BIT_10 /* Enable AUX Power */
#define PEX_DC_EN_PHANTOM BIT_9 /* Enable Phantom Functions */
#define PEX_DC_EN_EXT_TAG BIT_8 /* Enable Extended Tag Field */
#define PEX_DC_MAX_PLS_MSK (7<<5) /* Bit 7.. 5: Max. Payload Size Mask */
#define PEX_DC_EN_REL_ORD BIT_4 /* Enable Relaxed Ordering */
#define PEX_DC_EN_UNS_RQ_RP BIT_3 /* Enable Unsupported Request Reporting */
#define PEX_DC_EN_FAT_ER_RP BIT_2 /* Enable Fatal Error Reporting */
#define PEX_DC_EN_NFA_ER_RP BIT_1 /* Enable Non-Fatal Error Reporting */
#define PEX_DC_EN_COR_ER_RP BIT_0 /* Enable Correctable Error Reporting */
#define PEX_DC_MAX_RD_RQ_SIZE(x) (SHIFT12(x) & PEX_DC_MAX_RRS_MSK)
/* PEX_LNK_STAT 16 bit PEX Link Status (Yukon-2) */
#define PEX_LS_SLOT_CLK_CFG BIT_12 /* Slot Clock Config */
#define PEX_LS_LINK_TRAIN BIT_11 /* Link Training */
#define PEX_LS_TRAIN_ERROR BIT_10 /* Training Error */
#define PEX_LS_LINK_WI_MSK (0x3f<<4) /* Bit 9.. 4: Neg. Link Width Mask */
#define PEX_LS_LINK_SP_MSK 0x0f /* Bit 3.. 0: Link Speed Mask */
/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */
#define PEX_UNSUP_REQ BIT_20 /* Unsupported Request Error */
#define PEX_MALFOR_TLP BIT_18 /* Malformed TLP */
#define PEX_RX_OV BIT_17 /* Receiver Overflow (not supported) */
#define PEX_UNEXP_COMP BIT_16 /* Unexpected Completion */
#define PEX_COMP_TO BIT_14 /* Completion Timeout */
#define PEX_FLOW_CTRL_P BIT_13 /* Flow Control Protocol Error */
#define PEX_POIS_TLP BIT_12 /* Poisoned TLP */
#define PEX_DATA_LINK_P BIT_4 /* Data Link Protocol Error */
#define PEX_FATAL_ERRORS (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P)
/* Control Register File (Address Map) */
/*
* Bank 0
*/
#define B0_RAP 0x0000 /* 8 bit Register Address Port */
#define B0_CTST 0x0004 /* 16 bit Control/Status register */
#define B0_LED 0x0006 /* 8 Bit LED register */
#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */
#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */
#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */
#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */
#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */
#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg 1 */
/* Special ISR registers (Yukon-2 only) */
#define B0_Y2_SP_ISRC2 0x001c /* 32 bit Special Interrupt Source Reg 2 */
#define B0_Y2_SP_ISRC3 0x0020 /* 32 bit Special Interrupt Source Reg 3 */
#define B0_Y2_SP_EISR 0x0024 /* 32 bit Enter ISR Reg */
#define B0_Y2_SP_LISR 0x0028 /* 32 bit Leave ISR Reg */
#define B0_Y2_SP_ICR 0x002c /* 32 bit Interrupt Control Reg */
/*
* Bank 1
* - completely empty (this is the RAP Block window)
* Note: if RAP = 1 this page is reserved
*/
/*
* Bank 2
*/
/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */
#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */
#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */
#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */
#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */
#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */
#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */
#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */
#define B2_Y2_CLK_GATE 0x011d /* 8 bit Clock Gating (Yukon-2) */
#define B2_Y2_HW_RES 0x011e /* 8 bit HW Resources (Yukon-2) */
#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */
#define B2_Y2_CLK_CTRL 0x0120 /* 32 bit Core Clock Frequency Control */
#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */
#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */
#define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */
#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */
#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/
#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */
#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */
#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */
#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */
#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */
#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */
#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */
#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */
#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */
#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */
#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */
#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */
#define Y2_PEX_PHY_DATA 0x0170 /* 16 bit PEX PHY Data Register */
#define Y2_PEX_PHY_ADDR 0x0172 /* 16 bit PEX PHY Address Register */
/*
* Bank 3
*/
/* RAM Random Registers */
#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */
#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */
#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */
#define SELECT_RAM_BUFFER(rb, addr) (addr | (rb << 6)) /* Yukon-2 only */
/* RAM Interface Registers */
/* Yukon-2: use SELECT_RAM_BUFFER() to access the RAM buffer */
/*
* The HW-Spec. calls this registers Timeout Value 0..11. But this names are
* not usable in SW. Please notice these are NOT real timeouts, these are
* the number of qWords transferred continuously.
*/
#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */
#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */
#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */
#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */
#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */
#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */
#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */
#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */
#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */
#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */
#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/
#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/
#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */
#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */
#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */
/*
* Bank 4 - 5
*/
/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/
#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */
#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */
#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */
#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */
#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */
#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */
#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs))
/* RSS key registers for Yukon-2 Family */
#define B4_RSS_KEY 0x0220 /* 4x32 bit RSS Key register (Yukon-2) */
/* RSS key register offsets */
#define KEY_IDX_0 0 /* offset for location of KEY 0 */
#define KEY_IDX_1 4 /* offset for location of KEY 1 */
#define KEY_IDX_2 8 /* offset for location of KEY 2 */
#define KEY_IDX_3 12 /* offset for location of KEY 3 */
/* 0x0280 - 0x0292: MAC 2 */
#define RSS_KEY_ADDR(Port, KeyIndex) ((B4_RSS_KEY | ( ((Port) == 0) ? 0 : 0x80)) + (KeyIndex))
/*
* Bank 8 - 15
*/
/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
#define B8_Q_REGS 0x0400
/* Queue Register Offsets, use Q_ADDR() to access */
#define Q_D 0x00 /* 8*32 bit Current Descriptor */
#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */
#define Q_DONE 0x24 /* 16 bit Done Index */
#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */
#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */
#define Q_BC 0x30 /* 32 bit Current Byte Counter */
#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */
#define Q_F 0x38 /* 32 bit Flag Register */
#define Q_T1 0x3c /* 32 bit Test Register 1 */
#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */
#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */
#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */
#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */
#define Q_WM 0x40 /* 16 bit FIFO Watermark */
#define Q_AL 0x42 /* 8 bit FIFO Alignment */
#define Q_RSP 0x44 /* 16 bit FIFO Read Shadow Pointer */
#define Q_RSL 0x46 /* 8 bit FIFO Read Shadow Level */
#define Q_RP 0x48 /* 8 bit FIFO Read Pointer */
#define Q_RL 0x4a /* 8 bit FIFO Read Level */
#define Q_WP 0x4c /* 8 bit FIFO Write Pointer */
#define Q_WSP 0x4d /* 8 bit FIFO Write Shadow Pointer */
#define Q_WL 0x4e /* 8 bit FIFO Write Level */
#define Q_WSL 0x4f /* 8 bit FIFO Write Shadow Level */
#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs))
/* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address */
#define Y2_B8_PREF_REGS 0x0450
#define PREF_UNIT_CTRL_REG 0x00 /* 32 bit Prefetch Control register */
#define PREF_UNIT_LAST_IDX_REG 0x04 /* 16 bit Last Index */
#define PREF_UNIT_ADDR_LOW_REG 0x08 /* 32 bit List start addr, low part */
#define PREF_UNIT_ADDR_HI_REG 0x0c /* 32 bit List start addr, high part*/
#define PREF_UNIT_GET_IDX_REG 0x10 /* 16 bit Get Index */
#define PREF_UNIT_PUT_IDX_REG 0x14 /* 16 bit Put Index */
#define PREF_UNIT_FIFO_WP_REG 0x20 /* 8 bit FIFO write pointer */
#define PREF_UNIT_FIFO_RP_REG 0x24 /* 8 bit FIFO read pointer */
#define PREF_UNIT_FIFO_WM_REG 0x28 /* 8 bit FIFO watermark */
#define PREF_UNIT_FIFO_LEV_REG 0x2c /* 8 bit FIFO level */
#define PREF_UNIT_MASK_IDX 0x0fff
#define Y2_PREF_Q_ADDR(Queue, Offs) (Y2_B8_PREF_REGS + (Queue) + (Offs))
/*
* Bank 16 - 23
*/
/* RAM Buffer Registers */
#define B16_RAM_REGS 0x0800
/* RAM Buffer Register Offsets, use RB_ADDR() to access */
#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */
#define RB_END 0x04 /* 32 bit RAM Buffer End Address */
#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */
#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */
#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Packet */
#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Packet */
#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */
#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */
#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */
#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */
#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */
#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */
#define RB_TST2 0x2a /* 8 bit RAM Buffer Test Register 2 */
/*
* Bank 24
*/
/* Receive GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */
#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */
#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */
#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */
#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */
#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */
#define RX_GMF_TR_THR 0x0c54 /* 32 bit Rx Truncation Threshold (Yukon-2) */
#define RX_GMF_UP_THR 0x0c58 /* 16 bit Rx Upper Pause Thr (Yukon-EC_U) */
#define RX_GMF_LP_THR 0x0c5a /* 16 bit Rx Lower Pause Thr (Yukon-EC_U) */
#define RX_GMF_VLAN 0x0c5c /* 32 bit Rx VLAN Type Register (Yukon-2) */
#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */
#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */
#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */
#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */
/*
* Bank 25
*/
/* 0x0c80 - 0x0cbf: MAC 2 */
/* 0x0cc0 - 0x0cff: reserved */
/*
* Bank 26
*/
/* Transmit GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */
#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */
#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */
#define TX_GMF_VLAN 0x0d5c /* 32 bit Tx VLAN Type Register (Yukon-2) */
#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */
#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Pointer */
#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */
#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */
#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */
#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */
/*
* Bank 27
*/
/* 0x0d80 - 0x0dbf: MAC 2 */
/* 0x0daa - 0x0dff: reserved */
/*
* Bank 28
*/
/* Descriptor Poll Timer Registers */
#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */
#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */
#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */
#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */
/* Time Stamp Timer Registers (YUKON only) */
#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */
#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */
#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */
/* Polling Unit Registers (Yukon-2 only) */
#define POLL_CTRL 0x0e20 /* 32 bit Polling Unit Control Reg */
#define POLL_LAST_IDX 0x0e24 /* 16 bit Polling Unit List Last Index */
#define POLL_LIST_ADDR_LO 0x0e28 /* 32 bit Poll. List Start Addr (low) */
#define POLL_LIST_ADDR_HI 0x0e2c /* 32 bit Poll. List Start Addr (high) */
/* ASF Subsystem Registers (Yukon-2 only) */
#define B28_Y2_SMB_CONFIG 0x0e40 /* 32 bit ASF SMBus Config Register */
#define B28_Y2_SMB_CSD_REG 0x0e44 /* 32 bit ASF SMB Control/Status/Data */
#define B28_Y2_ASF_IRQ_V_BASE 0x0e60 /* 32 bit ASF IRQ Vector Base */
#define B28_Y2_ASF_STAT_CMD 0x0e68 /* 32 bit ASF Status and Command Reg */
#define B28_Y2_ASF_HCU_CCSR 0x0e68 /* 32 bit ASF HCU CCSR (Yukon EX) */
#define B28_Y2_ASF_HOST_COM 0x0e6c /* 32 bit ASF Host Communication Reg */
#define B28_Y2_DATA_REG_1 0x0e70 /* 32 bit ASF/Host Data Register 1 */
#define B28_Y2_DATA_REG_2 0x0e74 /* 32 bit ASF/Host Data Register 2 */
#define B28_Y2_DATA_REG_3 0x0e78 /* 32 bit ASF/Host Data Register 3 */
#define B28_Y2_DATA_REG_4 0x0e7c /* 32 bit ASF/Host Data Register 4 */
/*
* Bank 29
*/
/* Status BMU Registers (Yukon-2 only)*/
#define STAT_CTRL 0x0e80 /* 32 bit Status BMU Control Reg */
#define STAT_LAST_IDX 0x0e84 /* 16 bit Status BMU Last Index */
#define STAT_LIST_ADDR_LO 0x0e88 /* 32 bit Status List Start Addr (low) */
#define STAT_LIST_ADDR_HI 0x0e8c /* 32 bit Status List Start Addr (high) */
#define STAT_TXA1_RIDX 0x0e90 /* 16 bit Status TxA1 Report Index Reg */
#define STAT_TXS1_RIDX 0x0e92 /* 16 bit Status TxS1 Report Index Reg */
#define STAT_TXA2_RIDX 0x0e94 /* 16 bit Status TxA2 Report Index Reg */
#define STAT_TXS2_RIDX 0x0e96 /* 16 bit Status TxS2 Report Index Reg */
#define STAT_TX_IDX_TH 0x0e98 /* 16 bit Status Tx Index Threshold Reg */
#define STAT_PUT_IDX 0x0e9c /* 16 bit Status Put Index Reg */
/* FIFO Control/Status Registers (Yukon-2 only)*/
#define STAT_FIFO_WP 0x0ea0 /* 8 bit Status FIFO Write Pointer Reg */
#define STAT_FIFO_RP 0x0ea4 /* 8 bit Status FIFO Read Pointer Reg */
#define STAT_FIFO_RSP 0x0ea6 /* 8 bit Status FIFO Read Shadow Ptr */
#define STAT_FIFO_LEVEL 0x0ea8 /* 8 bit Status FIFO Level Reg */
#define STAT_FIFO_SHLVL 0x0eaa /* 8 bit Status FIFO Shadow Level Reg */
#define STAT_FIFO_WM 0x0eac /* 8 bit Status FIFO Watermark Reg */
#define STAT_FIFO_ISR_WM 0x0ead /* 8 bit Status FIFO ISR Watermark Reg */
/* Level and ISR Timer Registers (Yukon-2 only)*/
#define STAT_LEV_TIMER_INI 0x0eb0 /* 32 bit Level Timer Init. Value Reg */
#define STAT_LEV_TIMER_CNT 0x0eb4 /* 32 bit Level Timer Counter Reg */
#define STAT_LEV_TIMER_CTRL 0x0eb8 /* 8 bit Level Timer Control Reg */
#define STAT_LEV_TIMER_TEST 0x0eb9 /* 8 bit Level Timer Test Reg */
#define STAT_TX_TIMER_INI 0x0ec0 /* 32 bit Tx Timer Init. Value Reg */
#define STAT_TX_TIMER_CNT 0x0ec4 /* 32 bit Tx Timer Counter Reg */
#define STAT_TX_TIMER_CTRL 0x0ec8 /* 8 bit Tx Timer Control Reg */
#define STAT_TX_TIMER_TEST 0x0ec9 /* 8 bit Tx Timer Test Reg */
#define STAT_ISR_TIMER_INI 0x0ed0 /* 32 bit ISR Timer Init. Value Reg */
#define STAT_ISR_TIMER_CNT 0x0ed4 /* 32 bit ISR Timer Counter Reg */
#define STAT_ISR_TIMER_CTRL 0x0ed8 /* 8 bit ISR Timer Control Reg */
#define STAT_ISR_TIMER_TEST 0x0ed9 /* 8 bit ISR Timer Test Reg */
#define ST_LAST_IDX_MASK 0x007f /* Last Index Mask */
#define ST_TXRP_IDX_MASK 0x0fff /* Tx Report Index Mask */
#define ST_TXTH_IDX_MASK 0x0fff /* Tx Threshold Index Mask */
#define ST_WM_IDX_MASK 0x3f /* FIFO Watermark Index Mask */
/*
* Bank 30
*/
/* GMAC and GPHY Control Registers (YUKON only) */
#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */
#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */
#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */
#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */
#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */
/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */
#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */
#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */
#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */
#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */
#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */
#define WOL_PATT_PME 0x0f2a /* 8 bit WOL PME Match Enable (Yukon-2) */
#define WOL_PATT_ASFM 0x0f2b /* 8 bit WOL ASF Match Enable (Yukon-2) */
#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Pointer */
/* WOL Pattern Length Registers (YUKON only) */
#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */
#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */
/* WOL Pattern Counter Registers (YUKON only) */
#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */
#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */
/*
* Bank 32 - 33
*/
#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */
#define WOL_PATT_RAM_2 0x1400 /* WOL Pattern RAM Link 2 */
/* offset to configuration space on Yukon-2 */
#define Y2_CFG_SPC 0x1c00
#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */
#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */
/*
* Control Register Bit Definitions:
*/
/* B0_CTST 24 bit Control/Status register */
#define Y2_VMAIN_AVAIL BIT_17 /* VMAIN available (YUKON-2 only) */
#define Y2_VAUX_AVAIL BIT_16 /* VAUX available (YUKON-2 only) */
#define Y2_HW_WOL_ON BIT_15 /* HW WOL On (Yukon-EC Ultra A1 only) */
#define Y2_HW_WOL_OFF BIT_14 /* HW WOL Off (Yukon-EC Ultra A1 only) */
#define Y2_ASF_ENABLE BIT_13 /* ASF Unit Enable (YUKON-2 only) */
#define Y2_ASF_DISABLE BIT_12 /* ASF Unit Disable (YUKON-2 only) */
#define Y2_CLK_RUN_ENA BIT_11 /* CLK_RUN Enable (YUKON-2 only) */
#define Y2_CLK_RUN_DIS BIT_10 /* CLK_RUN Disable (YUKON-2 only) */
#define Y2_LED_STAT_ON BIT_9 /* Status LED On (YUKON-2 only) */
#define Y2_LED_STAT_OFF BIT_8 /* Status LED Off (YUKON-2 only) */
#define CS_ST_SW_IRQ BIT_7 /* Set IRQ SW Request */
#define CS_CL_SW_IRQ BIT_6 /* Clear IRQ SW Request */
#define CS_STOP_DONE BIT_5 /* Stop Master is finished */
#define CS_STOP_MAST BIT_4 /* Command Bit to stop the master */
#define CS_MRST_CLR BIT_3 /* Clear Master Reset */
#define CS_MRST_SET BIT_2 /* Set Master Reset */
#define CS_RST_CLR BIT_1 /* Clear Software Reset */
#define CS_RST_SET BIT_0 /* Set Software Reset */
#define Y_ULTRA_2_PLUG_IN_GO_EN BIT_15
#define LED_STAT_ON BIT_1 /* Status LED On */
#define LED_STAT_OFF BIT_0 /* Status LED Off */
/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */
#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */
#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */
#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */
#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */
#define PC_VAUX_ON BIT_3 /* Switch VAUX On */
#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */
#define PC_VCC_ON BIT_1 /* Switch VCC On */
#define PC_VCC_OFF BIT_0 /* Switch VCC Off */
/* B0_ISRC 32 bit Interrupt Source Register */
/* B0_IMSK 32 bit Interrupt Mask Register */
/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */
/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */
/* B0_Y2_SP_ISRC2 32 bit Special Interrupt Source Reg 2 */
/* B0_Y2_SP_ISRC3 32 bit Special Interrupt Source Reg 3 */
/* B0_Y2_SP_EISR 32 bit Enter ISR Reg */
/* B0_Y2_SP_LISR 32 bit Leave ISR Reg */
#define Y2_IS_PORT_MASK(Port, Mask) ((Mask) << (Port*8))
#define Y2_IS_HW_ERR BIT_31 /* Interrupt HW Error */
#define Y2_IS_STAT_BMU BIT_30 /* Status BMU Interrupt */
#define Y2_IS_ASF BIT_29 /* ASF subsystem Interrupt */
#define Y2_IS_POLL_CHK BIT_27 /* Check IRQ from polling unit */
#define Y2_IS_TWSI_RDY BIT_26 /* IRQ on end of TWSI Tx */
#define Y2_IS_IRQ_SW BIT_25 /* SW forced IRQ */
#define Y2_IS_TIMINT BIT_24 /* IRQ from Timer */
#define Y2_IS_IRQ_PHY2 BIT_12 /* Interrupt from PHY 2 */
#define Y2_IS_IRQ_MAC2 BIT_11 /* Interrupt from MAC 2 */
#define Y2_IS_CHK_RX2 BIT_10 /* Descriptor error Rx 2 */
#define Y2_IS_CHK_TXS2 BIT_9 /* Descriptor error TXS 2 */
#define Y2_IS_CHK_TXA2 BIT_8 /* Descriptor error TXA 2 */
#define Y2_IS_PSM_ACK BIT_7 /* PSM Ack (Yukon Optima) */
#define Y2_IS_PTP_TIST BIT_6 /* PTP TIme Stamp (Yukon Optima) */
#define Y2_IS_PHY_QLNK BIT_5 /* PHY Quick Link (Yukon Optima) */
#define Y2_IS_IRQ_PHY1 BIT_4 /* Interrupt from PHY 1 */
#define Y2_IS_IRQ_MAC1 BIT_3 /* Interrupt from MAC 1 */
#define Y2_IS_CHK_RX1 BIT_2 /* Descriptor error Rx 1 */
#define Y2_IS_CHK_TXS1 BIT_1 /* Descriptor error TXS 1 */
#define Y2_IS_CHK_TXA1 BIT_0 /* Descriptor error TXA 1 */
#define Y2_IS_L1_MASK 0x0000001f /* IRQ Mask for port 1 */
#define Y2_IS_L2_MASK 0x00001f00 /* IRQ Mask for port 2 */
#define Y2_IS_ALL_MSK 0xef001f1f /* All Interrupt bits */
#define Y2_IS_PORT_A (Y2_IS_IRQ_PHY1 | Y2_IS_IRQ_MAC1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_RX1)
#define Y2_IS_PORT_B (Y2_IS_IRQ_PHY2 | Y2_IS_IRQ_MAC2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_RX2)
/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */
/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */
/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
#define Y2_IS_TIST_OV BIT_29 /* Time Stamp Timer overflow interrupt */
#define Y2_IS_SENSOR BIT_28 /* Sensor interrupt */
#define Y2_IS_MST_ERR BIT_27 /* Master error interrupt */
#define Y2_IS_IRQ_STAT BIT_26 /* Status exception interrupt */
#define Y2_IS_PCI_EXP BIT_25 /* PCI-Express interrupt */
#define Y2_IS_PCI_NEXP BIT_24 /* PCI-Express error similar to PCI error */
#define Y2_IS_PAR_RD2 BIT_13 /* Read RAM parity error interrupt */
#define Y2_IS_PAR_WR2 BIT_12 /* Write RAM parity error interrupt */
#define Y2_IS_PAR_MAC2 BIT_11 /* MAC hardware fault interrupt */
#define Y2_IS_PAR_RX2 BIT_10 /* Parity Error Rx Queue 2 */
#define Y2_IS_TCP_TXS2 BIT_9 /* TCP length mismatch sync Tx queue IRQ */
#define Y2_IS_TCP_TXA2 BIT_8 /* TCP length mismatch async Tx queue IRQ */
#define Y2_IS_PAR_RD1 BIT_5 /* Read RAM parity error interrupt */
#define Y2_IS_PAR_WR1 BIT_4 /* Write RAM parity error interrupt */
#define Y2_IS_PAR_MAC1 BIT_3 /* MAC hardware fault interrupt */
#define Y2_IS_PAR_RX1 BIT_2 /* Parity Error Rx Queue 1 */
#define Y2_IS_TCP_TXS1 BIT_1 /* TCP length mismatch sync Tx queue IRQ */
#define Y2_IS_TCP_TXA1 BIT_0 /* TCP length mismatch async Tx queue IRQ */
#define Y2_HWE_L1_MASK (Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 | Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1)
#define Y2_HWE_L2_MASK (Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 | Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2)
#define Y2_HWE_ALL_MSK (Y2_IS_TIST_OV | /* Y2_IS_SENSOR | */ Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | \
Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP | Y2_HWE_L1_MASK | Y2_HWE_L2_MASK)
/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */
#define CFG_CHIP_R_MSK (0x0f<<4) /* Bit 7.. 4: Chip Revision */
#define CFG_DIS_M2_CLK BIT_1 /* Disable Clock for 2nd MAC */
#define CFG_SNG_MAC BIT_0 /* MAC Config: 0 = 2 MACs; 1 = 1 MAC */
/* B2_CHIP_ID 8 bit Chip Identification Number */
#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */
#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */
#define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */
#define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */
#define CHIP_ID_YUKON_XL 0xb3 /* Chip ID for YUKON-2 XL */
#define CHIP_ID_YUKON_EC_U 0xb4 /* Chip ID for YUKON-2 EC Ultra */
#define CHIP_ID_YUKON_EX 0xb5 /* Chip ID for YUKON-2 Extreme */
#define CHIP_ID_YUKON_EC 0xb6 /* Chip ID for YUKON-2 EC */
#define CHIP_ID_YUKON_FE 0xb7 /* Chip ID for YUKON-2 FE */
#define CHIP_ID_YUKON_FE_P 0xb8 /* Chip ID for YUKON-2 FE+ */
#define CHIP_ID_YUKON_SUPR 0xb9 /* Chip ID for YUKON-2 Supreme */
#define CHIP_ID_YUKON_UL_2 0xba /* Chip ID for YUKON-2 Ultra 2 */
#define CHIP_ID_YUKON_UNKNOWN 0xbb
#define CHIP_ID_YUKON_OPT 0xbc /* Chip ID for YUKON-2 Optima */
#define CHIP_REV_YU_XL_A0 0 /* Chip Rev. for Yukon-2 A0 */
#define CHIP_REV_YU_XL_A1 1 /* Chip Rev. for Yukon-2 A1 */
#define CHIP_REV_YU_XL_A2 2 /* Chip Rev. for Yukon-2 A2 */
#define CHIP_REV_YU_XL_A3 3 /* Chip Rev. for Yukon-2 A3 */
#define CHIP_REV_YU_EC_A1 0 /* Chip Rev. for Yukon-EC A1/A0 */
#define CHIP_REV_YU_EC_A2 1 /* Chip Rev. for Yukon-EC A2 */
#define CHIP_REV_YU_EC_A3 2 /* Chip Rev. for Yukon-EC A3 */
#define CHIP_REV_YU_EC_U_A0 1
#define CHIP_REV_YU_EC_U_A1 2
#define CHIP_REV_YU_FE_P_A0 0 /* Chip Rev. for Yukon-2 FE+ A0 */
#define CHIP_REV_YU_EX_A0 1 /* Chip Rev. for Yukon-2 EX A0 */
#define CHIP_REV_YU_EX_B0 2 /* Chip Rev. for Yukon-2 EX B0 */
/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */
#define Y2_STATUS_LNK2_INAC BIT_7 /* Status Link 2 inactiv (0 = activ) */
#define Y2_CLK_GAT_LNK2_DIS BIT_6 /* Disable clock gating Link 2 */
#define Y2_COR_CLK_LNK2_DIS BIT_5 /* Disable Core clock Link 2 */
#define Y2_PCI_CLK_LNK2_DIS BIT_4 /* Disable PCI clock Link 2 */
#define Y2_STATUS_LNK1_INAC BIT_3 /* Status Link 1 inactiv (0 = activ) */
#define Y2_CLK_GAT_LNK1_DIS BIT_2 /* Disable clock gating Link 1 */
#define Y2_COR_CLK_LNK1_DIS BIT_1 /* Disable Core clock Link 1 */
#define Y2_PCI_CLK_LNK1_DIS BIT_0 /* Disable PCI clock Link 1 */
/* B2_Y2_HW_RES 8 bit HW Resources (Yukon-2 only) */
#define CFG_LED_MODE_MSK (0x07<<2) /* Bit 4.. 2: LED Mode Mask */
#define CFG_LINK_2_AVAIL BIT_1 /* Link 2 available */
#define CFG_LINK_1_AVAIL BIT_0 /* Link 1 available */
#define CFG_LED_MODE(x) (((x) & CFG_LED_MODE_MSK) >> 2)
#define CFG_DUAL_MAC_MSK (CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL)
/* B2_E_3 8 bit lower 4 bits used for HW self test result */
#define B2_E3_RES_MASK 0x0f
/* B2_Y2_CLK_CTRL 32 bit Core Clock Frequency Control Register (Yukon-2/EC) */
/* Yukon-EC/FE */
#define Y2_CLK_DIV_VAL_MSK (0xff<<16) /* Bit 23..16: Clock Divisor Value */
#define Y2_CLK_DIV_VAL(x) (SHIFT16(x) & Y2_CLK_DIV_VAL_MSK)
/* Yukon-2 */
#define Y2_CLK_DIV_VAL2_MSK (0x07<<21) /* Bit 23..21: Clock Divisor Value */
#define Y2_CLK_SELECT2_MSK (0x1f<<16) /* Bit 20..16: Clock Select */
#define Y2_CLK_DIV_VAL_2(x) (SHIFT21 (x) & Y2_CLK_DIV_VAL2_MSK)
#define Y2_CLK_SEL_VAL_2(x) (SHIFT16 (x) & Y2_CLK_SELECT2_MSK)
#define Y2_CLK_DIV_ENA BIT_1 /* Enable Core Clock Division */
#define Y2_CLK_DIV_DIS BIT_0 /* Disable Core Clock Division */
/* B2_TI_CTRL 8 bit Timer control */
/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */
#define TIM_START BIT_2 /* Start Timer */
#define TIM_STOP BIT_1 /* Stop Timer */
#define TIM_CLR_IRQ BIT_0 /* Clear Timer IRQ (!IRQM) */
/* B2_TI_TEST 8 Bit Timer Test */
/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */
/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */
#define TIM_T_ON BIT_2 /* Test mode on */
#define TIM_T_OFF BIT_1 /* Test mode off */
#define TIM_T_STEP BIT_0 /* Test step */
/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */
/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */
#define DPT_MSK 0x00ffffff /* Bit 23.. 0: Desc Poll Timer Bits */
/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */
#define DPT_START BIT_1 /* Start Descriptor Poll Timer */
#define DPT_STOP BIT_0 /* Stop Descriptor Poll Timer */
/* B2_TST_CTRL1 8 bit Test Control Register 1 */
#define TST_FRC_DPERR_MR BIT_7 /* force DATAPERR on MST RD */
#define TST_FRC_DPERR_MW BIT_6 /* force DATAPERR on MST WR */
#define TST_FRC_DPERR_TR BIT_5 /* force DATAPERR on TRG RD */
#define TST_FRC_DPERR_TW BIT_4 /* force DATAPERR on TRG WR */
#define TST_FRC_APERR_M BIT_3 /* force ADDRPERR on MST */
#define TST_FRC_APERR_T BIT_2 /* force ADDRPERR on TRG */
#define TST_CFG_WRITE_ON BIT_1 /* Enable Config Reg WR */
#define TST_CFG_WRITE_OFF BIT_0 /* Disable Config Reg WR */
/* B2_GP_IO */
#define GLB_GPIO_CLK_DEB_ENA BIT_31 /* Clock Debug Enable */
#define GLB_GPIO_CLK_DBG_MSK 0x3c000000 /* Clock Debug */
#define GLB_GPIO_INT_RST_D3_DIS BIT_15 /* Disable Internal Reset After D3 to D0 */
#define GLB_GPIO_LED_PAD_SPEED_UP BIT_14 /* LED PAD Speed Up */
#define GLB_GPIO_STAT_RACE_DIS BIT_13 /* Status Race Disable */
#define GLB_GPIO_TEST_SEL_MSK 0x00001800 /* Testmode Select */
#define GLB_GPIO_TEST_SEL_BASE BIT_11
#define GLB_GPIO_RAND_ENA BIT_10 /* Random Enable */
#define GLB_GPIO_RAND_BIT_1 BIT_9 /* Random Bit 1 */
/* B2_I2C_CTRL 32 bit I2C HW Control Register */
#define I2C_FLAG BIT_31 /* Start read/write if WR */
#define I2C_ADDR (0x7fff<<16) /* Bit 30..16: Addr to be RD/WR */
#define I2C_DEV_SEL (0x7f<<9) /* Bit 15.. 9: I2C Device Select */
#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */
#define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */
#define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */
#define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */
#define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */
#define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */
#define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */
#define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */
#define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */
#define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */
#define I2C_STOP BIT_0 /* Interrupt I2C transfer */
/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */
#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */
/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */
#define I2C_DATA_DIR BIT_2 /* direction of I2C_DATA */
#define I2C_DATA BIT_1 /* I2C Data Port */
#define I2C_CLK BIT_0 /* I2C Clock Port */
/* I2C Address */
#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address (Volt and Temp) */
/* B2_BSC_CTRL 8 bit Blink Source Counter Control */
#define BSC_START BIT_1 /* Start Blink Source Counter */
#define BSC_STOP BIT_0 /* Stop Blink Source Counter */
/* B2_BSC_STAT 8 bit Blink Source Counter Status */
#define BSC_SRC BIT_0 /* Blink Source, 0=Off / 1=On */
/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */
#define BSC_T_ON BIT_2 /* Test mode on */
#define BSC_T_OFF BIT_1 /* Test mode off */
#define BSC_T_STEP BIT_0 /* Test step */
/* Y2_PEX_PHY_ADDR/DATA PEX PHY address and data reg (Yukon-2 only) */
#define PEX_RD_ACCESS BIT_31 /* Access Mode Read = 1, Write = 0 */
#define PEX_DB_ACCESS BIT_30 /* Access to debug register */
/* B3_RAM_ADDR 32 bit RAM Address, to read or write */
#define RAM_ADR_RAN 0x0007ffff /* Bit 18.. 0: RAM Address Range */
/* RAM Interface Registers */
/* B3_RI_CTRL 16 bit RAM Interface Control Register */
#define RI_CLR_RD_PERR BIT_9 /* Clear IRQ RAM Read Parity Err */
#define RI_CLR_WR_PERR BIT_8 /* Clear IRQ RAM Write Parity Err */
#define RI_RST_CLR BIT_1 /* Clear RAM Interface Reset */
#define RI_RST_SET BIT_0 /* Set RAM Interface Reset */
#define MSK_RI_TO_53 36 /* RAM interface timeout */
/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */
/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */
/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */
/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */
#define TXA_MAX_VAL 0x00ffffff/* Bit 23.. 0: Max TXA Timer/Cnt Val */
/* TXA_CTRL 8 bit Tx Arbiter Control Register */
#define TXA_ENA_FSYNC BIT_7 /* Enable force of sync Tx queue */
#define TXA_DIS_FSYNC BIT_6 /* Disable force of sync Tx queue */
#define TXA_ENA_ALLOC BIT_5 /* Enable alloc of free bandwidth */
#define TXA_DIS_ALLOC BIT_4 /* Disable alloc of free bandwidth */
#define TXA_START_RC BIT_3 /* Start sync Rate Control */
#define TXA_STOP_RC BIT_2 /* Stop sync Rate Control */
#define TXA_ENA_ARB BIT_1 /* Enable Tx Arbiter */
#define TXA_DIS_ARB BIT_0 /* Disable Tx Arbiter */
/* TXA_TEST 8 bit Tx Arbiter Test Register */
#define TXA_INT_T_ON BIT_5 /* Tx Arb Interval Timer Test On */
#define TXA_INT_T_OFF BIT_4 /* Tx Arb Interval Timer Test Off */
#define TXA_INT_T_STEP BIT_3 /* Tx Arb Interval Timer Step */
#define TXA_LIM_T_ON BIT_2 /* Tx Arb Limit Timer Test On */
#define TXA_LIM_T_OFF BIT_1 /* Tx Arb Limit Timer Test Off */
#define TXA_LIM_T_STEP BIT_0 /* Tx Arb Limit Timer Step */
/* TXA_STAT 8 bit Tx Arbiter Status Register */
#define TXA_PRIO_XS BIT_0 /* sync queue has prio to send */
/* Q_BC 32 bit Current Byte Counter */
#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */
/* Rx BMU Control / Status Registers (Yukon-2) */
#define BMU_IDLE BIT_31 /* BMU Idle State */
#define BMU_RX_TCP_PKT BIT_30 /* Rx TCP Packet (when RSS Hash enabled) */
#define BMU_RX_IP_PKT BIT_29 /* Rx IP Packet (when RSS Hash enabled) */
#define BMU_ENA_RX_RSS_HASH BIT_15 /* Enable Rx RSS Hash */
#define BMU_DIS_RX_RSS_HASH BIT_14 /* Disable Rx RSS Hash */
#define BMU_ENA_RX_CHKSUM BIT_13 /* Enable Rx TCP/IP Checksum Check */
#define BMU_DIS_RX_CHKSUM BIT_12 /* Disable Rx TCP/IP Checksum Check */
#define BMU_CLR_IRQ_PAR BIT_11 /* Clear IRQ on Parity errors (Rx) */
#define BMU_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segmen. error (Tx) */
#define BMU_CLR_IRQ_CHK BIT_10 /* Clear IRQ Check */
#define BMU_STOP BIT_9 /* Stop Rx/Tx Queue */
#define BMU_START BIT_8 /* Start Rx/Tx Queue */
#define BMU_FIFO_OP_ON BIT_7 /* FIFO Operational On */
#define BMU_FIFO_OP_OFF BIT_6 /* FIFO Operational Off */
#define BMU_FIFO_ENA BIT_5 /* Enable FIFO */
#define BMU_FIFO_RST BIT_4 /* Reset FIFO */
#define BMU_OP_ON BIT_3 /* BMU Operational On */
#define BMU_OP_OFF BIT_2 /* BMU Operational Off */
#define BMU_RST_CLR BIT_1 /* Clear BMU Reset (Enable) */
#define BMU_RST_SET BIT_0 /* Set BMU Reset */
#define BMU_CLR_RESET (BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR)
#define BMU_OPER_INIT (BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | BMU_START | BMU_FIFO_ENA | BMU_OP_ON)
/* Tx BMU Control / Status Registers (Yukon-2) */
/* Bit 31: same as for Rx */
#define BMU_TX_IPIDINCR_ON BIT_13 /* Enable IP ID Increment */
#define BMU_TX_IPIDINCR_OFF BIT_12 /* Disable IP ID Increment */
#define BMU_TX_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segm. length mism. */
/* Bit 10..0: same as for Rx */
/* Q_F 32 bit Flag Register */
#define F_TX_CHK_AUTO_OFF BIT_31 /* Tx checksum auto-calc Off(Yukon EX)*/
#define F_TX_CHK_AUTO_ON BIT_30 /* Tx checksum auto-calc On(Yukon EX)*/
#define F_ALM_FULL BIT_28 /* Rx FIFO: almost full */
#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */
#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */
#define F_WM_REACHED BIT_25 /* Watermark reached */
#define F_M_RX_RAM_DIS BIT_24 /* MAC Rx RAM Read Port disable */
#define F_FIFO_LEVEL (0x1f<<16)
/* Bit 23..16: # of Qwords in FIFO */
#define F_WATER_MARK 0x0007ff/* Bit 10.. 0: Watermark */
/* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address (Yukon-2 only)*/
/* PREF_UNIT_CTRL_REG 32 bit Prefetch Control register */
#define PREF_UNIT_OP_ON BIT_3 /* prefetch unit operational */
#define PREF_UNIT_OP_OFF BIT_2 /* prefetch unit not operational */
#define PREF_UNIT_RST_CLR BIT_1 /* Clear Prefetch Unit Reset */
#define PREF_UNIT_RST_SET BIT_0 /* Set Prefetch Unit Reset */
/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
/* RB_START 32 bit RAM Buffer Start Address */
/* RB_END 32 bit RAM Buffer End Address */
/* RB_WP 32 bit RAM Buffer Write Pointer */
/* RB_RP 32 bit RAM Buffer Read Pointer */
/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */
/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */
/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */
/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */
/* RB_PC 32 bit RAM Buffer Packet Counter */
/* RB_LEV 32 bit RAM Buffer Level Register */
#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */
/* RB_TST2 8 bit RAM Buffer Test Register 2 */
#define RB_PC_DEC BIT_3 /* Packet Counter Decrement */
#define RB_PC_T_ON BIT_2 /* Packet Counter Test On */
#define RB_PC_T_OFF BIT_1 /* Packet Counter Test Off */
#define RB_PC_INC BIT_0 /* Packet Counter Increment */
/* RB_TST1 8 bit RAM Buffer Test Register 1 */
#define RB_WP_T_ON BIT_6 /* Write Pointer Test On */
#define RB_WP_T_OFF BIT_5 /* Write Pointer Test Off */
#define RB_WP_INC BIT_4 /* Write Pointer Increment */
#define RB_RP_T_ON BIT_2 /* Read Pointer Test On */
#define RB_RP_T_OFF BIT_1 /* Read Pointer Test Off */
#define RB_RP_INC BIT_0 /* Read Pointer Increment */
/* RB_CTRL 8 bit RAM Buffer Control Register */
#define RB_ENA_STFWD BIT_5 /* Enable Store & Forward */
#define RB_DIS_STFWD BIT_4 /* Disable Store & Forward */
#define RB_ENA_OP_MD BIT_3 /* Enable Operation Mode */
#define RB_DIS_OP_MD BIT_2 /* Disable Operation Mode */
#define RB_RST_CLR BIT_1 /* Clear RAM Buf STM Reset */
#define RB_RST_SET BIT_0 /* Set RAM Buf STM Reset */
/* RAM Buffer High Pause Threshold values */
#define MSK_RB_ULPP (8 * 1024) /* Upper Level in kB/8 */
#define MSK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */
#define MSK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */
/* Threshold values for Yukon-EC Ultra */
#define MSK_ECU_ULPP 0x0080 /* Upper Pause Threshold (multiples of 8) */
#define MSK_ECU_LLPP 0x0060 /* Lower Pause Threshold (multiples of 8) */
#define MSK_ECU_AE_THR 0x0070 /* Almost Empty Threshold */
#define MSK_ECU_TXFF_LEV 0x01a0 /* Tx BMU FIFO Level */
#define MSK_ECU_JUMBO_WM 0x01
#define MSK_BMU_RX_WM 0x80 /* BMU Rx Watermark */
#define MSK_BMU_TX_WM 0x600 /* BMU Tx Watermark */
/* performance sensitive drivers should set this define to 0x80 */
#define MSK_BMU_RX_WM_PEX 0x600 /* BMU Rx Watermark for PEX */
/* Receive and Transmit Queues */
#define Q_R1 0x0000 /* Receive Queue 1 */
#define Q_R2 0x0080 /* Receive Queue 2 */
#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */
#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */
#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */
#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */
#define Q_ASF_R1 0x100 /* ASF Rx Queue 1 */
#define Q_ASF_R2 0x180 /* ASF Rx Queue 2 */
#define Q_ASF_T1 0x140 /* ASF Tx Queue 1 */
#define Q_ASF_T2 0x1c0 /* ASF Tx Queue 2 */
#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs))
/* Minimum RAM Buffer Rx Queue Size */
#define MSK_MIN_RXQ_SIZE 10
/* Minimum RAM Buffer Tx Queue Size */
#define MSK_MIN_TXQ_SIZE 10
/* Percentage of queue size from whole memory. 80 % for receive */
#define MSK_RAM_QUOTA_RX 80
/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */
#define WOL_CTL_LINK_CHG_OCC BIT_15
#define WOL_CTL_MAGIC_PKT_OCC BIT_14
#define WOL_CTL_PATTERN_OCC BIT_13
#define WOL_CTL_CLEAR_RESULT BIT_12
#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11
#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10
#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9
#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8
#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7
#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6
#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5
#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4
#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3
#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2
#define WOL_CTL_ENA_PATTERN_UNIT BIT_1
#define WOL_CTL_DIS_PATTERN_UNIT BIT_0
#define WOL_CTL_DEFAULT (WOL_CTL_DIS_PME_ON_LINK_CHG | WOL_CTL_DIS_PME_ON_PATTERN | \
WOL_CTL_DIS_PME_ON_MAGIC_PKT | WOL_CTL_DIS_LINK_CHG_UNIT | \
WOL_CTL_DIS_PATTERN_UNIT | WOL_CTL_DIS_MAGIC_PKT_UNIT)
/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */
#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x))
/* WOL_PATT_PME 8 bit WOL PME Match Enable (Yukon-2) */
#define WOL_PATT_FORCE_PME BIT_7 /* Generates a PME */
#define WOL_PATT_MATCH_PME_ALL 0x7f
/*
* Marvel-PHY Registers, indirect addressed over GMAC
*/
#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */
#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */
#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */
#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */
#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */
#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */
#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */
#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */
#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */
/* Marvel-specific registers */
#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */
#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */
/* 0x0b - 0x0e: reserved */
#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */
#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Control Reg */
#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Status Reg */
#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */
#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */
#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */
#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */
#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */
#define PHY_MARV_PORT_IRQ 0x17 /* 16 bit r/o Port 0 IRQ (88E1111 only) */
#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */
#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */
#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */
#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */
#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */
#define PHY_MARV_PAGE_ADDR 0x1d /* 16 bit r/w Extended Page Address Reg */
#define PHY_MARV_PAGE_DATA 0x1e /* 16 bit r/w Extended Page Data Reg */
/* for 10/100 Fast Ethernet PHY (88E3082 only) */
#define PHY_MARV_FE_LED_PAR 0x16 /* 16 bit r/w LED Parallel Select Reg. */
#define PHY_MARV_FE_LED_SER 0x17 /* 16 bit r/w LED Stream Select S. LED */
#define PHY_MARV_FE_VCT_TX 0x1a /* 16 bit r/w VCT Reg. for TXP/N Pins */
#define PHY_MARV_FE_VCT_RX 0x1b /* 16 bit r/o VCT Reg. for RXP/N Pins */
#define PHY_MARV_FE_SPEC_2 0x1c /* 16 bit r/w Specific Control Reg. 2 */
#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */
#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */
#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: Speed select, lower bit */
#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */
#define PHY_CT_PDOWN (1<<11) /* Bit 11: Power Down Mode */
#define PHY_CT_ISOL (1<<10) /* Bit 10: Isolate Mode */
#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */
#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */
#define PHY_CT_COL_TST (1<<7) /* Bit 7: Collision Test enabled */
#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: Speed select, upper bit */
#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */
#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */
#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */
#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */
#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: Preamble Suppression */
#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */
#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */
#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */
#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */
#define PHY_ST_JAB_DET (1<<1) /* Bit 1: Jabber Detected */
#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */
#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */
#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */
#define PHY_I1_REV_MSK 0xf /* Bit 3.. 0: Revision Number */
/* different Marvell PHY Ids */
#define PHY_MARV_ID0_VAL 0x0141 /* Marvell Unique Identifier */
#define PHY_MARV_ID1_B0 0x0C23 /* Yukon (PHY 88E1011) */
#define PHY_MARV_ID1_B2 0x0C25 /* Yukon-Plus (PHY 88E1011) */
#define PHY_MARV_ID1_C2 0x0CC2 /* Yukon-EC (PHY 88E1111) */
#define PHY_MARV_ID1_Y2 0x0C91 /* Yukon-2 (PHY 88E1112) */
#define PHY_MARV_ID1_FE 0x0C83 /* Yukon-FE (PHY 88E3082 Rev.A1) */
#define PHY_MARV_ID1_ECU 0x0CB0 /* Yukon-2 (PHY 88E1149 Rev.B2?) */
/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/
#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */
#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */
#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */
#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */
#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */
#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */
#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */
/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/
#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */
#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */
#define PHY_M_AN_RF BIT_13 /* Remote Fault */
#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */
#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */
#define PHY_M_AN_100_T4 BIT_9 /* Not cap. 100Base-T4 (always 0) */
#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */
#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */
#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */
#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */
#define PHY_M_AN_SEL_MSK (0x1f<<4) /* Bit 4.. 0: Selector Field Mask */
/* special defines for FIBER (88E1011S only) */
#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */
#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */
#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */
#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */
/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */
#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */
#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */
#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */
/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/
#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */
#define PHY_M_1000C_MSE BIT_12 /* Manual Master/Slave Enable */
#define PHY_M_1000C_MSC BIT_11 /* M/S Configuration (1=Master) */
#define PHY_M_1000C_MPD BIT_10 /* Multi-Port Device */
#define PHY_M_1000C_AFD BIT_9 /* Advertise Full Duplex */
#define PHY_M_1000C_AHD BIT_8 /* Advertise Half Duplex */
/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/
#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */
#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */
#define PHY_M_PC_ASS_CRS_TX BIT_11 /* Assert CRS on Transmit */
#define PHY_M_PC_FL_GOOD BIT_10 /* Force Link Good */
#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */
#define PHY_M_PC_ENA_EXT_D BIT_7 /* Enable Ext. Distance (10BT) */
#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */
#define PHY_M_PC_DIS_125CLK BIT_4 /* Disable 125 CLK */
#define PHY_M_PC_MAC_POW_UP BIT_3 /* MAC Power up */
#define PHY_M_PC_SQE_T_ENA BIT_2 /* SQE Test Enabled */
#define PHY_M_PC_POL_R_DIS BIT_1 /* Polarity Reversal Disabled */
#define PHY_M_PC_DIS_JABBER BIT_0 /* Disable Jabber */
#define PHY_M_PC_EN_DET SHIFT8(2) /* Energy Detect (Mode 1) */
#define PHY_M_PC_EN_DET_PLUS SHIFT8(3) /* Energy Detect Plus (Mode 2) */
#define PHY_M_PC_MDI_XMODE(x) (SHIFT5(x) & PHY_M_PC_MDIX_MSK)
#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */
#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */
#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */
/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
#define PHY_M_PC_DIS_LINK_P BIT_15 /* Disable Link Pulses */
#define PHY_M_PC_DSC_MSK (7<<12) /* Bit 14..12: Downshift Counter */
#define PHY_M_PC_DOWN_S_ENA BIT_11 /* Downshift Enable */
/* !!! Errata in spec. (1 = disable) */
#define PHY_M_PC_DSC(x) (SHIFT12(x) & PHY_M_PC_DSC_MSK)
/* 000=1x; 001=2x; 010=3x; 011=4x */
/* 100=5x; 101=6x; 110=7x; 111=8x */
/* for 10/100 Fast Ethernet PHY (88E3082 only) */
#define PHY_M_PC_ENA_DTE_DT BIT_15 /* Enable Data Terminal Equ. (DTE) Detect */
#define PHY_M_PC_ENA_ENE_DT BIT_14 /* Enable Energy Detect (sense & pulse) */
#define PHY_M_PC_DIS_NLP_CK BIT_13 /* Disable Normal Link Puls (NLP) Check */
#define PHY_M_PC_ENA_LIP_NP BIT_12 /* Enable Link Partner Next Page Reg. */
#define PHY_M_PC_DIS_NLP_GN BIT_11 /* Disable Normal Link Puls Generation */
#define PHY_M_PC_DIS_SCRAMB BIT_9 /* Disable Scrambler */
#define PHY_M_PC_DIS_FEFI BIT_8 /* Disable Far End Fault Indic. (FEFI) */
#define PHY_M_PC_SH_TP_SEL BIT_6 /* Shielded Twisted Pair Select */
#define PHY_M_PC_RX_FD_MSK (3<<2) /* Bit 3.. 2: Rx FIFO Depth Mask */
/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/
#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */
#define PHY_M_PS_SPEED_1000 BIT_15 /* 10 = 1000 Mbps */
#define PHY_M_PS_SPEED_100 BIT_14 /* 01 = 100 Mbps */
#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */
#define PHY_M_PS_FULL_DUP BIT_13 /* Full Duplex */
#define PHY_M_PS_PAGE_REC BIT_12 /* Page Received */
#define PHY_M_PS_SPDUP_RES BIT_11 /* Speed & Duplex Resolved */
#define PHY_M_PS_LINK_UP BIT_10 /* Link Up */
#define PHY_M_PS_CABLE_MSK (7<<7) /* Bit 9.. 7: Cable Length Mask */
#define PHY_M_PS_MDI_X_STAT BIT_6 /* MDI Crossover Stat (1=MDIX) */
#define PHY_M_PS_DOWNS_STAT BIT_5 /* Downshift Status (1=downsh.) */
#define PHY_M_PS_ENDET_STAT BIT_4 /* Energy Detect Status (1=act) */
#define PHY_M_PS_TX_P_EN BIT_3 /* Tx Pause Enabled */
#define PHY_M_PS_RX_P_EN BIT_2 /* Rx Pause Enabled */
#define PHY_M_PS_POL_REV BIT_1 /* Polarity Reversed */
#define PHY_M_PS_JABBER BIT_0 /* Jabber */
#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)
/* for 10/100 Fast Ethernet PHY (88E3082 only) */
#define PHY_M_PS_DTE_DETECT BIT_15 /* Data Terminal Equipment (DTE) Detected */
#define PHY_M_PS_RES_SPEED BIT_14 /* Resolved Speed (1=100 Mbps, 0=10 Mbps */
/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/
/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/
#define PHY_M_IS_AN_ERROR BIT_15 /* Auto-Negotiation Error */
#define PHY_M_IS_LSP_CHANGE BIT_14 /* Link Speed Changed */
#define PHY_M_IS_DUP_CHANGE BIT_13 /* Duplex Mode Changed */
#define PHY_M_IS_AN_PR BIT_12 /* Page Received */
#define PHY_M_IS_AN_COMPL BIT_11 /* Auto-Negotiation Completed */
#define PHY_M_IS_LST_CHANGE BIT_10 /* Link Status Changed */
#define PHY_M_IS_SYMB_ERROR BIT_9 /* Symbol Error */
#define PHY_M_IS_FALSE_CARR BIT_8 /* False Carrier */
#define PHY_M_IS_FIFO_ERROR BIT_7 /* FIFO Overflow/Underrun Error */
#define PHY_M_IS_MDI_CHANGE BIT_6 /* MDI Crossover Changed */
#define PHY_M_IS_DOWNSH_DET BIT_5 /* Downshift Detected */
#define PHY_M_IS_END_CHANGE BIT_4 /* Energy Detect Changed */
#define PHY_M_IS_DTE_CHANGE BIT_2 /* DTE Power Det. Status Changed */
#define PHY_M_IS_POL_CHANGE BIT_1 /* Polarity Changed */
#define PHY_M_IS_JABBER BIT_0 /* Jabber */
#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/
#define PHY_M_EC_ENA_BC_EXT BIT_15 /* Enable Block Carr. Ext. (88E1111 only) */
#define PHY_M_EC_ENA_LIN_LB BIT_14 /* Enable Line Loopback (88E1111 only) */
#define PHY_M_EC_DIS_LINK_P BIT_12 /* Disable Link Pulses (88E1111 only) */
#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master Downshift Counter */
/* (88E1011 only) */
#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave Downshift Counter */
/* (88E1011 only) */
#define PHY_M_EC_DSC_MSK_2 (7<<9) /* Bit 11.. 9: Downshift Counter */
/* (88E1111 only) */
#define PHY_M_EC_DOWN_S_ENA BIT_8 /* Downshift Enable (88E1111 only) */
/* !!! Errata in spec. (1 = disable) */
#define PHY_M_EC_RX_TIM_CT BIT_7 /* RGMII Rx Timing Control*/
#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */
#define PHY_M_EC_FIB_AN_ENA BIT_3 /* Fiber Auto-Neg. Enable (88E1011S only) */
#define PHY_M_EC_DTE_D_ENA BIT_2 /* DTE Detect Enable (88E1111 only) */
#define PHY_M_EC_TX_TIM_CT BIT_1 /* RGMII Tx Timing Control */
#define PHY_M_EC_TRANS_DIS BIT_0 /* Transmitter Disable (88E1111 only) */
#define PHY_M_EC_M_DSC(x) (SHIFT10 (x) & PHY_M_EC_M_DSC_MSK)
/* 00=1x; 01=2x; 10=3x; 11=4x */
#define PHY_M_EC_S_DSC(x) (SHIFT8 (x) & PHY_M_EC_S_DSC_MSK)
/* 00=dis; 01=1x; 10=2x; 11=3x */
#define PHY_M_EC_MAC_S(x) (SHIFT4 (x) & PHY_M_EC_MAC_S_MSK)
/* 01X=0; 110=2.5; 111=25 (MHz) */
#define PHY_M_EC_DSC_2(x) (SHIFT9 (x) & PHY_M_EC_DSC_MSK_2)
/* 000=1x; 001=2x; 010=3x; 011=4x */
/* 100=5x; 101=6x; 110=7x; 111=8x */
#define MAC_TX_CLK_0_MHZ 2
#define MAC_TX_CLK_2_5_MHZ 6
#define MAC_TX_CLK_25_MHZ 7
/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/
#define PHY_M_LEDC_DIS_LED BIT_15 /* Disable LED */
#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */
#define PHY_M_LEDC_F_INT BIT_11 /* Force Interrupt */
#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */
#define PHY_M_LEDC_DP_C_LSB BIT_7 /* Duplex Control (LSB, 88E1111 only) */
#define PHY_M_LEDC_TX_C_LSB BIT_6 /* Tx Control (LSB, 88E1111 only) */
#define PHY_M_LEDC_LK_C_MSK (7<<3) /* Bit 5.. 3: Link Control Mask */
/* (88E1111 only) */
#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */
/* (88E1011 only) */
#define PHY_M_LEDC_DP_CTRL BIT_2 /* Duplex Control */
#define PHY_M_LEDC_DP_C_MSB BIT_2 /* Duplex Control (MSB, 88E1111 only) */
#define PHY_M_LEDC_RX_CTRL BIT_1 /* Rx Activity / Link */
#define PHY_M_LEDC_TX_CTRL BIT_0 /* Tx Activity / Link */
#define PHY_M_LEDC_TX_C_MSB BIT_0 /* Tx Control (MSB, 88E1111 only) */
#define PHY_M_LED_PULS_DUR(x) (SHIFT12 (x) & PHY_M_LEDC_PULS_MSK)
#define PULS_NO_STR 0 /* no pulse stretching */
#define PULS_21MS 1 /* 21 ms to 42 ms */
#define PULS_42MS 2 /* 42 ms to 84 ms */
#define PULS_84MS 3 /* 84 ms to 170 ms */
#define PULS_170MS 4 /* 170 ms to 340 ms */
#define PULS_340MS 5 /* 340 ms to 670 ms */
#define PULS_670MS 6 /* 670 ms to 1.3 s */
#define PULS_1300MS 7 /* 1.3 s to 2.7 s */
#define PHY_M_LED_BLINK_RT(x) (SHIFT8 (x) & PHY_M_LEDC_BL_R_MSK)
#define BLINK_42MS 0 /* 42 ms */
#define BLINK_84MS 1 /* 84 ms */
#define BLINK_170MS 2 /* 170 ms */
#define BLINK_340MS 3 /* 340 ms */
#define BLINK_670MS 4 /* 670 ms */
/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/
#define PHY_M_LED_MO_SGMII(x) SHIFT14 (x) /* Bit 15..14: SGMII AN Timer */
#define PHY_M_LED_MO_DUP(x) SHIFT10 (x) /* Bit 11..10: Duplex */
#define PHY_M_LED_MO_10(x) SHIFT8 (x) /* Bit 9.. 8: Link 10 */
#define PHY_M_LED_MO_100(x) SHIFT6 (x) /* Bit 7.. 6: Link 100 */
#define PHY_M_LED_MO_1000(x) SHIFT4 (x) /* Bit 5.. 4: Link 1000 */
#define PHY_M_LED_MO_RX(x) SHIFT2 (x) /* Bit 3.. 2: Rx */
#define PHY_M_LED_MO_TX(x) SHIFT0 (x) /* Bit 1.. 0: Tx */
#define MO_LED_NORM 0
#define MO_LED_BLINK 1
#define MO_LED_OFF 2
#define MO_LED_ON 3
/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/
#define PHY_M_EC2_FI_IMPED BIT_6 /* Fiber Input Impedance */
#define PHY_M_EC2_FO_IMPED BIT_5 /* Fiber Output Impedance */
#define PHY_M_EC2_FO_M_CLK BIT_4 /* Fiber Mode Clock Enable */
#define PHY_M_EC2_FO_BOOST BIT_3 /* Fiber Output Boost */
#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */
/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/
#define PHY_M_FC_AUTO_SEL BIT_15 /* Fiber/Copper Auto Sel. Dis. */
#define PHY_M_FC_AN_REG_ACC BIT_14 /* Fiber/Copper AN Reg. Access */
#define PHY_M_FC_RESOLUTION BIT_13 /* Fiber/Copper Resolution */
#define PHY_M_SER_IF_AN_BP BIT_12 /* Ser. IF AN Bypass Enable */
#define PHY_M_SER_IF_BP_ST BIT_11 /* Ser. IF AN Bypass Status */
#define PHY_M_IRQ_POLARITY BIT_10 /* IRQ polarity */
#define PHY_M_DIS_AUT_MED BIT_9 /* Disable Aut. Medium Reg. Selection */
/* (88E1111 only) */
#define PHY_M_UNDOC1 BIT_7 /* undocumented bit !! */
#define PHY_M_DTE_POW_STAT BIT_4 /* DTE Power Status (88E1111 only) */
#define PHY_M_MODE_MASK 0xf /* Bit 3.. 0: copy of HWCFG MODE[3:0] */
/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/
#define PHY_M_CABD_ENA_TEST BIT_15 /* Enable Test (Page 0) */
#define PHY_M_CABD_DIS_WAIT BIT_15 /* Disable Waiting Period (Page 1) */
/* (88E1111 only) */
#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status Mask */
#define PHY_M_CABD_AMPL_MSK (0x1f<<8) /* Bit 12.. 8: Amplitude Mask */
/* (88E1111 only) */
#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance Mask */
/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
#define CABD_STAT_NORMAL 0
#define CABD_STAT_SHORT 1
#define CABD_STAT_OPEN 2
#define CABD_STAT_FAIL 3
/* for 10/100 Fast Ethernet PHY (88E3082 only) */
/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/
#define PHY_M_FELP_LED2_MSK (0xf<<8) /* Bit 11.. 8: LED2 Mask (LINK) */
#define PHY_M_FELP_LED1_MSK (0xf<<4) /* Bit 7.. 4: LED1 Mask (ACT) */
#define PHY_M_FELP_LED0_MSK 0xf /* Bit 3.. 0: LED0 Mask (SPEED) */
#define PHY_M_FELP_LED2_CTRL(x) (SHIFT8 (x) & PHY_M_FELP_LED2_MSK)
#define PHY_M_FELP_LED1_CTRL(x) (SHIFT4 (x) & PHY_M_FELP_LED1_MSK)
#define PHY_M_FELP_LED0_CTRL(x) (SHIFT0 (x) & PHY_M_FELP_LED0_MSK)
#define LED_PAR_CTRL_COLX 0x00
#define LED_PAR_CTRL_ERROR 0x01
#define LED_PAR_CTRL_DUPLEX 0x02
#define LED_PAR_CTRL_DP_COL 0x03
#define LED_PAR_CTRL_SPEED 0x04
#define LED_PAR_CTRL_LINK 0x05
#define LED_PAR_CTRL_TX 0x06
#define LED_PAR_CTRL_RX 0x07
#define LED_PAR_CTRL_ACT 0x08
#define LED_PAR_CTRL_LNK_RX 0x09
#define LED_PAR_CTRL_LNK_AC 0x0a
#define LED_PAR_CTRL_ACT_BL 0x0b
#define LED_PAR_CTRL_TX_BL 0x0c
#define LED_PAR_CTRL_RX_BL 0x0d
#define LED_PAR_CTRL_COL_BL 0x0e
#define LED_PAR_CTRL_INACT 0x0f
/***** PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/
#define PHY_M_FESC_DIS_WAIT BIT_2 /* Disable TDR Waiting Period */
#define PHY_M_FESC_ENA_MCLK BIT_1 /* Enable MAC Rx Clock in sleep mode */
#define PHY_M_FESC_SEL_CL_A BIT_0 /* Select Class A driver (100B-TX) */
/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
/***** PHY_MARV_PHY_CTRL (page 1) 16 bit r/w Fiber Specific Ctrl *****/
#define PHY_M_FIB_FORCE_LNK BIT_10 /* Force Link Good */
#define PHY_M_FIB_SIGD_POL BIT_9 /* SIGDET Polarity */
#define PHY_M_FIB_TX_DIS BIT_3 /* Transmitter Disable */
/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/
#define PHY_M_MAC_MD_MSK (7<<7) /* Bit 9.. 7: Mode Select Mask */
#define PHY_M_MAC_MD_AUTO 3 /* Auto Copper/1000Base-X */
#define PHY_M_MAC_MD_COPPER 5 /* Copper only */
#define PHY_M_MAC_MD_1000BX 7 /* 1000Base-X only */
#define PHY_M_MAC_MODE_SEL(x) (SHIFT7 (x) & PHY_M_MAC_MD_MSK)
/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/
#define PHY_M_LEDC_LOS_MSK (0xf<<12) /* Bit 15..12: LOS LED Ctrl. Mask */
#define PHY_M_LEDC_INIT_MSK (0xf<<8) /* Bit 11.. 8: INIT LED Ctrl. Mask */
#define PHY_M_LEDC_STA1_MSK (0xf<<4) /* Bit 7.. 4: STAT1 LED Ctrl. Mask */
#define PHY_M_LEDC_STA0_MSK 0xf /* Bit 3.. 0: STAT0 LED Ctrl. Mask */
#define PHY_M_LEDC_LOS_CTRL(x) (SHIFT12 (x) & PHY_M_LEDC_LOS_MSK)
#define PHY_M_LEDC_INIT_CTRL(x) (SHIFT8 (x) & PHY_M_LEDC_INIT_MSK)
#define PHY_M_LEDC_STA1_CTRL(x) (SHIFT4 (x) & PHY_M_LEDC_STA1_MSK)
#define PHY_M_LEDC_STA0_CTRL(x) (SHIFT0 (x) & PHY_M_LEDC_STA0_MSK)
/***** PHY_MARV_PHY_STAT (page 3) 16 bit r/w Polarity Control Reg. *****/
#define PHY_M_POLC_LS1M_MSK (0xf<<12) /* Bit 15..12: LOS,STAT1 Mix % Mask */
#define PHY_M_POLC_IS0M_MSK (0xf<<8) /* Bit 11.. 8: INIT,STAT0 Mix % Mask */
#define PHY_M_POLC_LOS_MSK (0x3<<6) /* Bit 7.. 6: LOS Pol. Ctrl. Mask */
#define PHY_M_POLC_INIT_MSK (0x3<<4) /* Bit 5.. 4: INIT Pol. Ctrl. Mask */
#define PHY_M_POLC_STA1_MSK (0x3<<2) /* Bit 3.. 2: STAT1 Pol. Ctrl. Mask */
#define PHY_M_POLC_STA0_MSK 0x3 /* Bit 1.. 0: STAT0 Pol. Ctrl. Mask */
#define PHY_M_POLC_LS1_P_MIX(x) (SHIFT12 (x) & PHY_M_POLC_LS1M_MSK)
#define PHY_M_POLC_IS0_P_MIX(x) (SHIFT8 (x) & PHY_M_POLC_IS0M_MSK)
#define PHY_M_POLC_LOS_CTRL(x) (SHIFT6 (x) & PHY_M_POLC_LOS_MSK)
#define PHY_M_POLC_INIT_CTRL(x) (SHIFT4 (x) & PHY_M_POLC_INIT_MSK)
#define PHY_M_POLC_STA1_CTRL(x) (SHIFT2 (x) & PHY_M_POLC_STA1_MSK)
#define PHY_M_POLC_STA0_CTRL(x) (SHIFT0 (x) & PHY_M_POLC_STA0_MSK)
/*
* GMAC registers
*
* The GMAC registers are 16 or 32 bits wide.
* The GMACs host processor interface is 16 bits wide,
* therefore ALL registers will be addressed with 16 bit accesses.
*
* Note: NA reg = Network Address e.g DA, SA etc.
*/
/* Port Registers */
#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */
#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */
#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */
#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */
#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow-Control */
#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */
#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */
/* Source Address Registers */
#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */
#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */
#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */
#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */
#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */
#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */
/* Multicast Address Hash Registers */
#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */
#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */
#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */
#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */
/* Interrupt Source Registers */
#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */
#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */
#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */
/* Interrupt Mask Registers */
#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */
#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */
#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */
/* Serial Management Interface (SMI) Registers */
#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */
#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */
#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */
/* MIB Counters */
#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */
#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */
/*
* MIB Counters base address definitions (low word) -
* use offset 4 for access to high word (32 bit r/o)
*/
#define GM_RXF_UC_OK (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */
#define GM_RXF_BC_OK (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */
#define GM_RXF_MPAUSE (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */
#define GM_RXF_MC_OK (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */
#define GM_RXF_FCS_ERR (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */
#define GM_RXF_SPARE1 (GM_MIB_CNT_BASE + 40) /* Rx spare 1 */
#define GM_RXO_OK_LO (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */
#define GM_RXO_OK_HI (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */
#define GM_RXO_ERR_LO (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */
#define GM_RXO_ERR_HI (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */
#define GM_RXF_SHT (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */
#define GM_RXE_FRAG (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Received with FCS Err */
#define GM_RXF_64B (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */
#define GM_RXF_127B (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */
#define GM_RXF_255B (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */
#define GM_RXF_511B (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */
#define GM_RXF_1023B (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */
#define GM_RXF_1518B (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */
#define GM_RXF_MAX_SZ (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */
#define GM_RXF_LNG_ERR (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */
#define GM_RXF_JAB_PKT (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */
#define GM_RXF_SPARE2 (GM_MIB_CNT_BASE + 168) /* Rx spare 2 */
#define GM_RXE_FIFO_OV (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */
#define GM_RXF_SPARE3 (GM_MIB_CNT_BASE + 184) /* Rx spare 3 */
#define GM_TXF_UC_OK (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */
#define GM_TXF_BC_OK (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */
#define GM_TXF_MPAUSE (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */
#define GM_TXF_MC_OK (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */
#define GM_TXO_OK_LO (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */
#define GM_TXO_OK_HI (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */
#define GM_TXF_64B (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */
#define GM_TXF_127B (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */
#define GM_TXF_255B (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */
#define GM_TXF_511B (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */
#define GM_TXF_1023B (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */
#define GM_TXF_1518B (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */
#define GM_TXF_MAX_SZ (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */
#define GM_TXF_SPARE1 (GM_MIB_CNT_BASE + 296) /* Tx spare 1 */
#define GM_TXF_COL (GM_MIB_CNT_BASE + 304) /* Tx Collision */
#define GM_TXF_LAT_COL (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */
#define GM_TXF_ABO_COL (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */
#define GM_TXF_MUL_COL (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */
#define GM_TXF_SNG_COL (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */
#define GM_TXE_FIFO_UR (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */
/*----------------------------------------------------------------------------*/
/*
* GMAC Bit Definitions
*
* If the bit access behaviour differs from the register access behaviour
* (r/w, r/o) this is documented after the bit number.
* The following bit access behaviours are used:
* (sc) self clearing
* (r/o) read only
*/
/* GM_GP_STAT 16 bit r/o General Purpose Status Register */
#define GM_GPSR_SPEED BIT_15 /* Port Speed (1 = 100 Mbps) */
#define GM_GPSR_DUPLEX BIT_14 /* Duplex Mode (1 = Full) */
#define GM_GPSR_FC_TX_DIS BIT_13 /* Tx Flow-Control Mode Disabled */
#define GM_GPSR_LINK_UP BIT_12 /* Link Up Status */
#define GM_GPSR_PAUSE BIT_11 /* Pause State */
#define GM_GPSR_TX_ACTIVE BIT_10 /* Tx in Progress */
#define GM_GPSR_EXC_COL BIT_9 /* Excessive Collisions Occured */
#define GM_GPSR_LAT_COL BIT_8 /* Late Collisions Occured */
#define GM_GPSR_PHY_ST_CH BIT_5 /* PHY Status Change */
#define GM_GPSR_GIG_SPEED BIT_4 /* Gigabit Speed (1 = 1000 Mbps) */
#define GM_GPSR_PART_MODE BIT_3 /* Partition mode */
#define GM_GPSR_FC_RX_DIS BIT_2 /* Rx Flow-Control Mode Disabled */
/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */
#define GM_GPCR_RMII_PH_ENA BIT_15 /* Enable RMII for PHY (Yukon-FE only) */
#define GM_GPCR_RMII_LB_ENA BIT_14 /* Enable RMII Loopback (Yukon-FE only) */
#define GM_GPCR_FC_TX_DIS BIT_13 /* Disable Tx Flow-Control Mode */
#define GM_GPCR_TX_ENA BIT_12 /* Enable Transmit */
#define GM_GPCR_RX_ENA BIT_11 /* Enable Receive */
#define GM_GPCR_LOOP_ENA BIT_9 /* Enable MAC Loopback Mode */
#define GM_GPCR_PART_ENA BIT_8 /* Enable Partition Mode */
#define GM_GPCR_GIGS_ENA BIT_7 /* Gigabit Speed (1000 Mbps) */
#define GM_GPCR_FL_PASS BIT_6 /* Force Link Pass */
#define GM_GPCR_DUP_FULL BIT_5 /* Full Duplex Mode */
#define GM_GPCR_FC_RX_DIS BIT_4 /* Disable Rx Flow-Control Mode */
#define GM_GPCR_SPEED_100 BIT_3 /* Port Speed 100 Mbps */
#define GM_GPCR_AU_DUP_DIS BIT_2 /* Disable Auto-Update Duplex */
#define GM_GPCR_AU_FCT_DIS BIT_1 /* Disable Auto-Update Flow-C. */
#define GM_GPCR_AU_SPD_DIS BIT_0 /* Disable Auto-Update Speed */
#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS | GM_GPCR_AU_SPD_DIS)
/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
#define GM_TXCR_FORCE_JAM BIT_15 /* Force Jam / Flow-Control */
#define GM_TXCR_CRC_DIS BIT_14 /* Disable insertion of CRC */
#define GM_TXCR_PAD_DIS BIT_13 /* Disable padding of packets */
#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold Mask */
#define GM_TXCR_PAD_PAT_MSK 0xff /* Bit 7.. 0: Padding Pattern Mask */
/* (Yukon-2 only) */
#define TX_COL_THR(x) (SHIFT10 (x) & GM_TXCR_COL_THR_MSK)
#define TX_COL_DEF 0x04
/* GM_RX_CTRL 16 bit r/w Receive Control Register */
#define GM_RXCR_UCF_ENA BIT_15 /* Enable Unicast filtering */
#define GM_RXCR_MCF_ENA BIT_14 /* Enable Multicast filtering */
#define GM_RXCR_CRC_DIS BIT_13 /* Remove 4-byte CRC */
#define GM_RXCR_PASS_FC BIT_12 /* Pass FC packets to FIFO (Yukon-1 only) */
/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */
#define GM_TXPA_JAMLEN_MSK (3<<14) /* Bit 15..14: Jam Length Mask */
#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13.. 9: Jam IPG Mask */
#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8.. 4: IPG Jam to Data Mask */
#define GM_TXPA_BO_LIM_MSK 0x0f /* Bit 3.. 0: Backoff Limit Mask */
/* (Yukon-2 only) */
#define TX_JAM_LEN_VAL(x) (SHIFT14 (x) & GM_TXPA_JAMLEN_MSK)
#define TX_JAM_IPG_VAL(x) (SHIFT9 (x) & GM_TXPA_JAMIPG_MSK)
#define TX_IPG_JAM_DATA(x) (SHIFT4 (x) & GM_TXPA_JAMDAT_MSK)
#define TX_BACK_OFF_LIM(x) ((x) & GM_TXPA_BO_LIM_MSK)
#define TX_JAM_LEN_DEF 0x03
#define TX_JAM_IPG_DEF 0x0b
#define TX_IPG_JAM_DEF 0x1c
#define TX_BOF_LIM_DEF 0x04
/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */
#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder */
/* r/o on Yukon, r/w on Yukon-EC */
#define GM_SMOD_LIMIT_4 BIT_10 /* 4 consecutive Tx trials */
#define GM_SMOD_VLAN_ENA BIT_9 /* Enable VLAN (Max. Frame Len) */
#define GM_SMOD_JUMBO_ENA BIT_8 /* Enable Jumbo (Max. Frame Len) */
#define GM_SMOD_IPG_MSK 0x1f /* Bit 4.. 0: Inter-Packet Gap (IPG) */
#define DATA_BLIND_VAL(x) (SHIFT11 (x) & GM_SMOD_DATABL_MSK)
#define IPG_DATA_VAL(x) ((x) & GM_SMOD_IPG_MSK)
#define DATA_BLIND_DEF 0x04
#define IPG_DATA_DEF 0x1e
/* GM_SMI_CTRL 16 bit r/w SMI Control Register */
#define GM_SMI_CT_PHY_A_MSK (0x1f<<11) /* Bit 15..11: PHY Device Address */
#define GM_SMI_CT_REG_A_MSK (0x1f<<6) /* Bit 10.. 6: PHY Register Address */
#define GM_SMI_CT_OP_RD BIT_5 /* OpCode Read (0=Write)*/
#define GM_SMI_CT_RD_VAL BIT_4 /* Read Valid (Read completed) */
#define GM_SMI_CT_BUSY BIT_3 /* Busy (Operation in progress) */
#define GM_SMI_CT_PHY_AD(x) (SHIFT11 (x) & GM_SMI_CT_PHY_A_MSK)
#define GM_SMI_CT_REG_AD(x) (SHIFT6 (x) & GM_SMI_CT_REG_A_MSK)
/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */
#define GM_PAR_MIB_CLR BIT_5 /* Set MIB Clear Counter Mode */
#define GM_PAR_MIB_TST BIT_4 /* MIB Load Counter (Test Mode) */
/* Receive Frame Status Encoding */
#define GMR_FS_LEN_MSK (0xffff<<16) /* Bit 31..16: Rx Frame Length */
#define GMR_FS_VLAN BIT_13 /* VLAN Packet */
#define GMR_FS_JABBER BIT_12 /* Jabber Packet */
#define GMR_FS_UN_SIZE BIT_11 /* Undersize Packet */
#define GMR_FS_MC BIT_10 /* Multicast Packet */
#define GMR_FS_BC BIT_9 /* Broadcast Packet */
#define GMR_FS_RX_OK BIT_8 /* Receive OK (Good Packet) */
#define GMR_FS_GOOD_FC BIT_7 /* Good Flow-Control Packet */
#define GMR_FS_BAD_FC BIT_6 /* Bad Flow-Control Packet */
#define GMR_FS_MII_ERR BIT_5 /* MII Error */
#define GMR_FS_LONG_ERR BIT_4 /* Too Long Packet */
#define GMR_FS_FRAGMENT BIT_3 /* Fragment */
#define GMR_FS_CRC_ERR BIT_1 /* CRC Error */
#define GMR_FS_RX_FF_OV BIT_0 /* Rx FIFO Overflow */
#define GMR_FS_LEN_SHIFT 16
#define GMR_FS_ANY_ERR ( \
GMR_FS_RX_FF_OV | \
GMR_FS_CRC_ERR | \
GMR_FS_FRAGMENT | \
GMR_FS_LONG_ERR | \
GMR_FS_MII_ERR | \
GMR_FS_BAD_FC | \
GMR_FS_GOOD_FC | \
GMR_FS_UN_SIZE | \
GMR_FS_JABBER)
/* Rx GMAC FIFO Flush Mask (default) */
#define RX_FF_FL_DEF_MSK GMR_FS_ANY_ERR
/* Receive and Transmit GMAC FIFO Registers (YUKON only) */
/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */
/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */
/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */
/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */
/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */
/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */
/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */
/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/
/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */
/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Pointer */
/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */
/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */
/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */
/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */
/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */
#define RX_TRUNC_ON BIT_27 /* enable packet truncation */
#define RX_TRUNC_OFF BIT_26 /* disable packet truncation */
#define RX_VLAN_STRIP_ON BIT_25 /* enable VLAN stripping */
#define RX_VLAN_STRIP_OFF BIT_24 /* disable VLAN stripping */
#define GMF_RX_MACSEC_FLUSH_ON BIT_23
#define GMF_RX_MACSEC_FLUSH_OFF BIT_22
#define GMF_RX_OVER_ON BIT_19 /* enable flushing on receive overrun */
#define GMF_RX_OVER_OFF BIT_18 /* disable flushing on receive overrun */
#define GMF_ASF_RX_OVER_ON BIT_17 /* enable flushing of ASF when overrun */
#define GMF_ASF_RX_OVER_OFF BIT_16 /* disable flushing of ASF when overrun */
#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */
#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */
#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */
#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */
#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */
#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */
#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */
#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */
#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */
#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */
#define GMF_OPER_ON BIT_3 /* Operational Mode On */
#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */
#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */
#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */
/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test (YUKON and Yukon-2) */
#define TX_STFW_DIS BIT_31 /* Disable Store & Forward (Yukon-EC Ultra) */
#define TX_STFW_ENA BIT_30 /* Enable Store & Forward (Yukon-EC Ultra) */
#define TX_VLAN_TAG_ON BIT_25 /* enable VLAN tagging */
#define TX_VLAN_TAG_OFF BIT_24 /* disable VLAN tagging */
#define TX_JUMBO_ENA BIT_23 /* Enable Jumbo Mode (Yukon-EC Ultra) */
#define TX_JUMBO_DIS BIT_22 /* Disable Jumbo Mode (Yukon-EC Ultra) */
#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */
#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */
#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */
/* Bits 15..8: same as for RX_GMF_CTRL_T */
#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */
#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */
#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */
/* Bits 3..0: same as for RX_GMF_CTRL_T */
#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON)
#define GMF_TX_CTRL_DEF GMF_OPER_ON
#define RX_GMF_AF_THR_MIN 0x0c /* Rx GMAC FIFO Almost Full Thresh. min. */
#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */
/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */
#define GMT_ST_START BIT_2 /* Start Time Stamp Timer */
#define GMT_ST_STOP BIT_1 /* Stop Time Stamp Timer */
#define GMT_ST_CLR_IRQ BIT_0 /* Clear Time Stamp Timer IRQ */
/* POLL_CTRL 32 bit Polling Unit control register (Yukon-2 only) */
#define PC_CLR_IRQ_CHK BIT_5 /* Clear IRQ Check */
#define PC_POLL_RQ BIT_4 /* Poll Request Start */
#define PC_POLL_OP_ON BIT_3 /* Operational Mode On */
#define PC_POLL_OP_OFF BIT_2 /* Operational Mode Off */
#define PC_POLL_RST_CLR BIT_1 /* Clear Polling Unit Reset (Enable) */
#define PC_POLL_RST_SET BIT_0 /* Set Polling Unit Reset */
/* B28_Y2_ASF_STAT_CMD 32 bit ASF Status and Command Reg */
/* This register is used by the host driver software */
#define Y2_ASF_OS_PRES BIT_4 /* ASF operation system present */
#define Y2_ASF_RESET BIT_3 /* ASF system in reset state */
#define Y2_ASF_RUNNING BIT_2 /* ASF system operational */
#define Y2_ASF_CLR_HSTI BIT_1 /* Clear ASF IRQ */
#define Y2_ASF_IRQ BIT_0 /* Issue an IRQ to ASF system */
#define Y2_ASF_UC_STATE (3<<2) /* ASF uC State */
#define Y2_ASF_CLK_HALT 0 /* ASF system clock stopped */
/* B28_Y2_ASF_HCU_CCSR 32bit CPU Control and Status Register (Yukon EX) */
#define Y2_ASF_HCU_CCSR_SMBALERT_MONITOR BIT_27 /* SMBALERT pin monitor */
#define Y2_ASF_HCU_CCSR_CPU_SLEEP BIT_26 /* CPU sleep status */
#define Y2_ASF_HCU_CCSR_CS_TO BIT_25 /* Clock Stretching Timeout */
#define Y2_ASF_HCU_CCSR_WDOG BIT_24 /* Watchdog Reset */
#define Y2_ASF_HCU_CCSR_CLR_IRQ_HOST BIT_17 /* Clear IRQ_HOST */
#define Y2_ASF_HCU_CCSR_SET_IRQ_HCU BIT_16 /* Set IRQ_HCU */
#define Y2_ASF_HCU_CCSR_AHB_RST BIT_9 /* Reset AHB bridge */
#define Y2_ASF_HCU_CCSR_CPU_RST_MODE BIT_8 /* CPU Reset Mode */
#define Y2_ASF_HCU_CCSR_SET_SYNC_CPU BIT_5
#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE1 BIT_4
#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE0 BIT_3
#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_MSK (BIT_4 | BIT_3) /* CPU Clock Divide */
#define Y2_ASF_HCU_CCSR_CPU_CLK_DIVIDE_BASE BIT_3
#define Y2_ASF_HCU_CCSR_OS_PRSNT BIT_2 /* ASF OS Present */
/* Microcontroller State */
#define Y2_ASF_HCU_CCSR_UC_STATE_MSK 3
#define Y2_ASF_HCU_CCSR_UC_STATE_BASE BIT_0
#define Y2_ASF_HCU_CCSR_ASF_RESET 0
#define Y2_ASF_HCU_CCSR_ASF_HALTED BIT_1
#define Y2_ASF_HCU_CCSR_ASF_RUNNING BIT_0
/* B28_Y2_ASF_HOST_COM 32 bit ASF Host Communication Reg */
/* This register is used by the ASF firmware */
#define Y2_ASF_CLR_ASFI BIT_1 /* Clear host IRQ */
#define Y2_ASF_HOST_IRQ BIT_0 /* Issue an IRQ to HOST system */
/* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */
#define SC_STAT_CLR_IRQ BIT_4 /* Status Burst IRQ clear */
#define SC_STAT_OP_ON BIT_3 /* Operational Mode On */
#define SC_STAT_OP_OFF BIT_2 /* Operational Mode Off */
#define SC_STAT_RST_CLR BIT_1 /* Clear Status Unit Reset (Enable) */
#define SC_STAT_RST_SET BIT_0 /* Set Status Unit Reset */
/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */
#define GMC_SEC_RST BIT_15 /* MAC SEC RST */
#define GMC_SEC_RST_OFF BIT_14 /* MAC SEC RST Off */
#define GMC_BYP_MACSECRX_ON BIT_13 /* Bypass MAC SEC RX */
#define GMC_BYP_MACSECRX_OFF BIT_12 /* Bypass MAC SEC RX Off */
#define GMC_BYP_MACSECTX_ON BIT_11 /* Bypass MAC SEC TX */
#define GMC_BYP_MACSECTX_OFF BIT_10 /* Bypass MAC SEC TX Off */
#define GMC_BYP_RETR_ON BIT_9 /* Bypass MAC retransmit FIFO On */
#define GMC_BYP_RETR_OFF BIT_8 /* Bypass MAC retransmit FIFO Off */
#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */
#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */
#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */
#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */
#define GMC_PAUSE_ON BIT_3 /* Pause On */
#define GMC_PAUSE_OFF BIT_2 /* Pause Off */
#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */
#define GMC_RST_SET BIT_0 /* Set GMAC Reset */
/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */
#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */
#define GPC_INT_POL BIT_27 /* IRQ Polarity is Active Low */
#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */
#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */
#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */
#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */
#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */
#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */
#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */
#define GPC_ANEG_0 BIT_19 /* ANEG[0] */
#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */
#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */
#define GPC_ANEG_3 BIT_16 /* ANEG[3] */
#define GPC_ANEG_2 BIT_15 /* ANEG[2] */
#define GPC_ANEG_1 BIT_14 /* ANEG[1] */
#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */
#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */
#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */
#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */
#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */
#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */
#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */
#define GPC_RST_SET BIT_0 /* Set GPHY Reset */
/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */
/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */
#define GM_IS_RX_CO_OV BIT_5 /* Receive Counter Overflow IRQ */
#define GM_IS_TX_CO_OV BIT_4 /* Transmit Counter Overflow IRQ */
#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */
#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */
#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */
#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */
#define GMAC_DEF_MSK (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV | GM_IS_TX_FF_UR)
// GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only)
#define GMLC_RST_CLR BIT_1 // Clear GMAC Link Reset
#define GMLC_RST_SET BIT_0 // Set GMAC Link Reset
#define MSK_PORT_A 0
#define MSK_PORT_B 1
// Register access macros
#define CSR_WRITE_4(sc, reg, val) MmioWrite32 ((sc)->RegBase + (reg), (val))
#define CSR_WRITE_2(sc, reg, val) MmioWrite16 ((sc)->RegBase + (reg), (val))
#define CSR_WRITE_1(sc, reg, val) MmioWrite8 ((sc)->RegBase + (reg), (val))
#define CSR_READ_4(sc, reg) MmioRead32 ((sc)->RegBase + (reg))
#define CSR_READ_2(sc, reg) MmioRead16 ((sc)->RegBase + (reg))
#define CSR_READ_1(sc, reg) MmioRead8 ((sc)->RegBase + (reg))
#define CSR_PCI_WRITE_4(sc, reg, val) MmioWrite32 ((sc)->RegBase + Y2_CFG_SPC + (reg), (val))
#define CSR_PCI_WRITE_2(sc, reg, val) MmioWrite16 ((sc)->RegBase + Y2_CFG_SPC + (reg), (val))
#define CSR_PCI_WRITE_1(sc, reg, val) MmioWrite8 ((sc)->RegBase + Y2_CFG_SPC + (reg), (val))
#define CSR_PCI_READ_4(sc, reg) MmioRead32 ((sc)->RegBase + Y2_CFG_SPC + (reg))
#define CSR_PCI_READ_2(sc, reg) MmioRead16 ((sc)->RegBase + Y2_CFG_SPC + (reg))
#define CSR_PCI_READ_1(sc, reg) MmioRead8 ((sc)->RegBase + Y2_CFG_SPC + (reg))
#define GMAC_REG(port, reg) ((BASE_GMAC_1 + (port) * (BASE_GMAC_2 - BASE_GMAC_1)) | (reg))
#define GMAC_WRITE_2(sc, port, reg, val) CSR_WRITE_2 ((sc), GMAC_REG((port), (reg)), (val))
#define GMAC_READ_2(sc, port, reg) CSR_READ_2 ((sc), GMAC_REG((port), (reg)))
// GPHY address (bits 15..11 of SMI control reg)
#define PHY_ADDR_MARV 0
#define MSK_ADDR_LO(x) ((UINT64) (x) & 0xffffffffUL)
#define MSK_ADDR_HI(x) ((UINT64) (x) >> 32)
// PCI Status error definitions (not all of these are defined in MdePkg/Include/IndustryStandard/Pci22.h
#define PCIM_STATUS_CAPPRESENT 0x0010
#define PCIM_STATUS_66CAPABLE 0x0020
#define PCIM_STATUS_BACKTOBACK 0x0080
#define PCIM_STATUS_PERRREPORT 0x0100
#define PCIM_STATUS_SEL_FAST 0x0000
#define PCIM_STATUS_SEL_MEDIMUM 0x0200
#define PCIM_STATUS_SEL_SLOW 0x0400
#define PCIM_STATUS_SEL_MASK 0x0600
#define PCIM_STATUS_STABORT 0x0800
#define PCIM_STATUS_RTABORT 0x1000
#define PCIM_STATUS_RMABORT 0x2000
#define PCIM_STATUS_SERR 0x4000
#define PCIM_STATUS_PERR 0x8000
//
// At first I guessed 8 bytes, the size of a single descriptor, would be
// required alignment constraints. But, it seems that Yukon II have 4096
// bytes boundary alignment constraints.
//
#define MSK_RING_ALIGN 4096
#define MSK_STAT_ALIGN 4096
// Rx descriptor data structure
struct msk_rx_desc {
UINT32 msk_addr;
UINT32 msk_control;
};
// Tx descriptor data structure
struct msk_tx_desc {
UINT32 msk_addr;
UINT32 msk_control;
};
// Status descriptor data structure
struct msk_stat_desc {
UINT32 msk_status;
UINT32 msk_control;
};
// Mask and shift value to get Tx async queue status for port 1
#define STLE_TXA1_MSKL 0x00000fff
#define STLE_TXA1_SHIFTL 0
// Mask and shift value to get Tx sync queue status for port 1
#define STLE_TXS1_MSKL 0x00fff000
#define STLE_TXS1_SHIFTL 12
// Mask and shift value to get Tx async queue status for port 2
#define STLE_TXA2_MSKL 0xff000000
#define STLE_TXA2_SHIFTL 24
#define STLE_TXA2_MSKH 0x000f
// This one shifts up
#define STLE_TXA2_SHIFTH 8
// Mask and shift value to get Tx sync queue status for port 2
#define STLE_TXS2_MSKL 0x00000000
#define STLE_TXS2_SHIFTL 0
#define STLE_TXS2_MSKH 0xfff0
#define STLE_TXS2_SHIFTH 4
// YUKON-2 bit values
#define HW_OWNER 0x80000000
#define SW_OWNER 0x00000000
#define PU_PUTIDX_VALID 0x10000000
// YUKON-2 Control flags
#define UDPTCP 0x00010000
#define CALSUM 0x00020000
#define WR_SUM 0x00040000
#define INIT_SUM 0x00080000
#define LOCK_SUM 0x00100000
#define INS_VLAN 0x00200000
#define FRC_STAT 0x00400000
#define EOP 0x00800000
#define TX_LOCK 0x01000000
#define BUF_SEND 0x02000000
#define PACKET_SEND 0x04000000
#define NO_WARNING 0x40000000
#define NO_UPDATE 0x80000000
// YUKON-2 Rx/Tx opcodes defines
#define OP_TCPWRITE 0x11000000
#define OP_TCPSTART 0x12000000
#define OP_TCPINIT 0x14000000
#define OP_TCPLCK 0x18000000
#define OP_TCPCHKSUM OP_TCPSTART
#define OP_TCPIS (OP_TCPINIT | OP_TCPSTART)
#define OP_TCPLW (OP_TCPLCK | OP_TCPWRITE)
#define OP_TCPLSW (OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE)
#define OP_TCPLISW (OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE)
#define OP_ADDR64 0x21000000
#define OP_VLAN 0x22000000
#define OP_ADDR64VLAN (OP_ADDR64 | OP_VLAN)
#define OP_LRGLEN 0x24000000
#define OP_LRGLENVLAN (OP_LRGLEN | OP_VLAN)
#define OP_MSS 0x28000000
#define OP_MSSVLAN (OP_MSS | OP_VLAN)
#define OP_BUFFER 0x40000000
#define OP_PACKET 0x41000000
#define OP_LARGESEND 0x43000000
// YUKON-2 STATUS opcodes defines
#define OP_RXSTAT 0x60000000
#define OP_RXTIMESTAMP 0x61000000
#define OP_RXVLAN 0x62000000
#define OP_RXCHKS 0x64000000
#define OP_RXCHKSVLAN (OP_RXCHKS | OP_RXVLAN)
#define OP_RXTIMEVLAN (OP_RXTIMESTAMP | OP_RXVLAN)
#define OP_RSS_HASH 0x65000000
#define OP_TXINDEXLE 0x68000000
// YUKON-2 SPECIAL opcodes defines
#define OP_PUTIDX 0x70000000
#define STLE_OP_MASK 0xff000000
#define STLE_CSS_MASK 0x00ff0000
#define STLE_LEN_MASK 0x0000ffff
// CSS defined in status LE(valid for descriptor V2 format)
#define CSS_TCPUDP_CSUM_OK 0x00800000
#define CSS_UDP 0x00400000
#define CSS_TCP 0x00200000
#define CSS_IPFRAG 0x00100000
#define CSS_IPV6 0x00080000
#define CSS_IPV4_CSUM_OK 0x00040000
#define CSS_IPV4 0x00020000
#define CSS_PORT 0x00010000
// Descriptor Bit Definition
// TxCtrl Transmit Buffer Control Field
// RxCtrl Receive Buffer Control Field
#define BMU_OWN BIT_31 // OWN bit: 0=host/1=BMU
#define BMU_STF BIT_30 // Start of Frame
#define BMU_EOF BIT_29 // End of Frame
#define BMU_IRQ_EOB BIT_28 // Req "End of Buffer" IRQ
#define BMU_IRQ_EOF BIT_27 // Req "End of Frame" IRQ
// TxCtrl specific bits
#define BMU_STFWD BIT_26 // (Tx) Store & Forward Frame
#define BMU_NO_FCS BIT_25 // (Tx) Disable MAC FCS (CRC) generation
#define BMU_SW BIT_24 // (Tx) 1 bit res. for SW use
// RxCtrl specific bits
#define BMU_DEV_0 BIT_26 // (Rx) Transfer data to Dev0
#define BMU_STAT_VAL BIT_25 // (Rx) Rx Status Valid
#define BMU_TIST_VAL BIT_24 // (Rx) Rx TimeStamp Valid
// Bit 23..16: BMU Check Opcodes
#define BMU_CHECK (0x55<<16) // Default BMU check
#define BMU_TCP_CHECK (0x56<<16) // Descr with TCP ext
#define BMU_UDP_CHECK (0x57<<16) // Descr with UDP ext (YUKON only)
#define BMU_BBC 0xffff // Bit 15.. 0: Buffer Byte Counter
/* Use 64-bit DMA in all cases in UEFI. After much discussion on the mailing
* list, it was determined that there is not currently a good way to detect
* whether 32-bit DMA should be used (if ever) or whether there are any
* supported platforms on which 64-bit DMA would not work */
#define MSK_64BIT_DMA
#define MSK_TX_RING_CNT 512
#define MSK_RX_RING_CNT 512
#define MSK_RX_BUF_ALIGN 8
#define MSK_JUMBO_RX_RING_CNT MSK_RX_RING_CNT
#define MSK_STAT_RING_CNT 512
#define MSK_MAXTXSEGS 32
#define MSK_TSO_MAXSGSIZE 4096
#define MSK_TSO_MAXSIZE (65535 + sizeof (struct ether_vlan_header))
/*
* It seems that the hardware requires extra decriptors(LEs) to offload
* TCP/UDP checksum, VLAN hardware tag inserstion and TSO.
*
* 1 descriptor for TCP/UDP checksum offload.
* 1 descriptor VLAN hardware tag insertion.
* 1 descriptor for TSO(TCP Segmentation Offload)
* 1 descriptor for 64bits DMA : Not applicatable due to the use of
* BUS_SPACE_MAXADDR_32BIT in parent DMA tag creation.
*/
#define MSK_RESERVED_TX_DESC_CNT 3
/*
* Jumbo buffer stuff. Note that we must allocate more jumbo
* buffers than there are descriptors in the receive ring. This
* is because we don't know how long it will take for a packet
* to be released after we hand it off to the upper protocol
* layers. To be safe, we allocate 1.5 times the number of
* receive descriptors.
*/
/*#define MSK_JUMBO_FRAMELEN 9022
#define MSK_JUMBO_MTU (MSK_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN)
#define MSK_MAX_FRAMELEN \
(ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN - ETHER_CRC_LEN)
#define MSK_MIN_FRAMELEN (ETHER_MIN_LEN - ETHER_CRC_LEN)
*/
#define htole32(x) (x) // All UEFI platforms are little endian
#define le32toh(x) (x)
#define ACPI_SPECFLAG_PREFETCHABLE 0x06
#define TX_MBUF_SIGNATURE SIGNATURE_32 ('t','x','m','b')
#define RX_MBUF_SIGNATURE SIGNATURE_32 ('r','x','m','b')
#define ETHER_CRC_POLY_LE 0xedb88320
#define ETHER_CRC_POLY_BE 0x04c11db6
//#define JUMBO_RX_MBUF_SIGNATURE SIGNATURE_32('j','r','x','m')
typedef struct {
VOID *Buf;
UINTN Length;
} MSK_SYSTEM_BUF;
typedef struct {
UINTN Signature;
LIST_ENTRY Link;
MSK_SYSTEM_BUF SystemBuf;
} MSK_LINKED_SYSTEM_BUF;
typedef struct {
VOID *Buf;
UINTN Length;
VOID *DmaMapping;
} MSK_DMA_BUF;
typedef struct {
UINTN Signature;
LIST_ENTRY Link;
MSK_DMA_BUF DmaBuf;
} MSK_LINKED_DMA_BUF;
struct msk_txdesc {
MSK_DMA_BUF tx_m;
struct msk_tx_desc *tx_le;
};
struct msk_rxdesc {
MSK_DMA_BUF rx_m;
struct msk_rx_desc *rx_le;
};
struct msk_chain_data {
struct msk_txdesc msk_txdesc[MSK_TX_RING_CNT];
struct msk_rxdesc msk_rxdesc[MSK_RX_RING_CNT];
void *msk_tx_ring_map;
void *msk_rx_ring_map;
// struct msk_rxdesc msk_jumbo_rxdesc[MSK_JUMBO_RX_RING_CNT];
INTN msk_tx_high_addr;
INTN msk_tx_prod;
INTN msk_tx_cons;
INTN msk_tx_cnt;
INTN msk_tx_put;
INTN msk_rx_cons;
INTN msk_rx_prod;
INTN msk_rx_putwm;
};
struct msk_ring_data {
struct msk_tx_desc *msk_tx_ring;
EFI_PHYSICAL_ADDRESS msk_tx_ring_paddr;
struct msk_rx_desc *msk_rx_ring;
EFI_PHYSICAL_ADDRESS msk_rx_ring_paddr;
// struct msk_rx_desc *msk_jumbo_rx_ring;
// EFI_PHYSICAL_ADDRESS msk_jumbo_rx_ring_paddr;
};
#define MSK_TX_RING_ADDR(sc, i) \
((sc)->msk_rdata.msk_tx_ring_paddr + sizeof (struct msk_tx_desc) * (i))
#define MSK_RX_RING_ADDR(sc, i) \
((sc)->msk_rdata.msk_rx_ring_paddr + sizeof (struct msk_rx_desc) * (i))
#define MSK_TX_RING_SZ (sizeof (struct msk_tx_desc) * MSK_TX_RING_CNT)
#define MSK_RX_RING_SZ (sizeof (struct msk_rx_desc) * MSK_RX_RING_CNT)
#define MSK_JUMBO_RX_RING_SZ (sizeof (struct msk_rx_desc) * MSK_JUMBO_RX_RING_CNT)
#define MSK_STAT_RING_SZ (sizeof (struct msk_stat_desc) * MSK_STAT_RING_CNT)
#define MSK_INC(x, y) ((x) = (x + 1) % y)
#ifdef MSK_64BIT_DMA
#define MSK_RX_INC(x, y) (x) = (x + 2) % y
#define MSK_RX_BUF_CNT (MSK_RX_RING_CNT / 2)
#define MSK_JUMBO_RX_BUF_CNT (MSK_JUMBO_RX_RING_CNT / 2)
#else
#define MSK_RX_INC(x, y) (x) = (x + 1) % y
#define MSK_RX_BUF_CNT MSK_RX_RING_CNT
#define MSK_JUMBO_RX_BUF_CNT MSK_JUMBO_RX_RING_CNT
#endif
#define MSK_PCI_BUS 0
#define MSK_PCIX_BUS 1
#define MSK_PEX_BUS 2
#define MSK_PROC_DEFAULT (MSK_RX_RING_CNT / 2)
#define MSK_PROC_MIN 30
#define MSK_PROC_MAX (MSK_RX_RING_CNT - 1)
#define MSK_INT_HOLDOFF_DEFAULT 100
#define MSK_TX_TIMEOUT 5
#define MSK_PUT_WM 10
/* Forward decl. */
struct msk_if_softc;
struct msk_hw_stats {
/* Rx stats. */
UINT32 rx_ucast_frames;
UINT32 rx_bcast_frames;
UINT32 rx_pause_frames;
UINT32 rx_mcast_frames;
UINT32 rx_crc_errs;
UINT32 rx_spare1;
UINT64 rx_good_octets;
UINT64 rx_bad_octets;
UINT32 rx_runts;
UINT32 rx_runt_errs;
UINT32 rx_pkts_64;
UINT32 rx_pkts_65_127;
UINT32 rx_pkts_128_255;
UINT32 rx_pkts_256_511;
UINT32 rx_pkts_512_1023;
UINT32 rx_pkts_1024_1518;
UINT32 rx_pkts_1519_max;
UINT32 rx_pkts_too_long;
UINT32 rx_pkts_jabbers;
UINT32 rx_spare2;
UINT32 rx_fifo_oflows;
UINT32 rx_spare3;
/* Tx stats. */
UINT32 tx_ucast_frames;
UINT32 tx_bcast_frames;
UINT32 tx_pause_frames;
UINT32 tx_mcast_frames;
UINT64 tx_octets;
UINT32 tx_pkts_64;
UINT32 tx_pkts_65_127;
UINT32 tx_pkts_128_255;
UINT32 tx_pkts_256_511;
UINT32 tx_pkts_512_1023;
UINT32 tx_pkts_1024_1518;
UINT32 tx_pkts_1519_max;
UINT32 tx_spare1;
UINT32 tx_colls;
UINT32 tx_late_colls;
UINT32 tx_excess_colls;
UINT32 tx_multi_colls;
UINT32 tx_single_colls;
UINT32 tx_underflows;
};
/* Softc for the Marvell Yukon II controller. */
struct msk_softc {
UINT32 RegBase;
UINT64 OriginalPciAttributes;
UINT8 msk_hw_id;
UINT8 msk_hw_rev;
UINT8 msk_bustype;
UINT8 msk_num_port;
INTN msk_expcap;
// INTN msk_pcixcap;
INTN msk_ramsize; /* amount of SRAM on NIC */
UINT32 msk_pmd; /* physical media type */
UINT32 msk_intrmask;
UINT32 msk_intrhwemask;
UINT32 msk_pflags;
INTN msk_clock;
struct msk_if_softc *msk_if[2];
INTN msk_txqsize;
INTN msk_rxqsize;
INTN msk_txqstart[2];
INTN msk_txqend[2];
INTN msk_rxqstart[2];
INTN msk_rxqend[2];
void *msk_stat_map;
struct msk_stat_desc *msk_stat_ring;
EFI_PHYSICAL_ADDRESS msk_stat_ring_paddr;
INTN msk_int_holdoff;
INTN msk_process_limit;
INTN msk_stat_cons;
EFI_EVENT Timer;
EFI_PCI_IO_PROTOCOL *PciIo;
};
#define MSK_USECS(sc, us) ((sc)->msk_clock * (us))
/* Softc for each logical interface. */
struct msk_if_softc {
// INT32 msk_port; /* port # on controller */
struct msk_mii_data msk_md;
struct mii_data mii_d;
INTN msk_framesize;
INTN msk_phytype;
INTN msk_phyaddr;
UINT32 msk_flags;
#define MSK_FLAG_MSI 0x0001
#define MSK_FLAG_FASTETHER 0x0004
#define MSK_FLAG_JUMBO 0x0008
#define MSK_FLAG_JUMBO_NOCSUM 0x0010
#define MSK_FLAG_RAMBUF 0x0020
#define MSK_FLAG_DESCV2 0x0040
#define MSK_FLAG_AUTOTX_CSUM 0x0080
#define MSK_FLAG_NOHWVLAN 0x0100
#define MSK_FLAG_NORXCHK 0x0200
#define MSK_FLAG_NORX_CSUM 0x0400
#define MSK_FLAG_SUSPEND 0x2000
#define MSK_FLAG_DETACH 0x4000
#define MSK_FLAG_LINK 0x8000
// INTN msk_watchdog_timer;
UINT32 msk_txq; /* Tx. Async Queue offset */
UINT32 msk_txsq; /* Tx. Syn Queue offset */
UINT32 msk_rxq; /* Rx. Qeueue offset */
struct msk_chain_data msk_cdata;
struct msk_ring_data msk_rdata;
struct msk_hw_stats msk_stats;
struct msk_softc *msk_softc; /* parent controller */
VOID *phy_softc; /* interface phy */
BOOLEAN active;
LIST_ENTRY TransmitQueueHead;
LIST_ENTRY TransmitFreeQueueHead;
LIST_ENTRY ReceiveQueueHead;
EFI_MAC_ADDRESS MacAddress;
};
#define MSK_TIMEOUT 1000
#define MSK_PHY_POWERUP 1
#define MSK_PHY_POWERDOWN 0
#endif /* _IF_MSKREG_H_ */